SS35中文资料
Magnesense差压变送器(翻译资料,中英文对照)
Model MS-121* MS-321* MS-721* MS-111* MS-311* MS-711* MS-131 MS-141 MS-151 MS-331 MS-341 MS-351 MS-021 MS-221 MS-621
Output 4-20 mA 0-10 V 0-5 V 4-20 mA 0-10 V 0-5 V 4-20 mA 4-20 mA 4-20 mA 0-10 V 0-10 V 0-10 V 4-20 mA 0-10 V 0-5 V
技术指标 介质：空气和不燃气体，兼容气体。 材质：请咨询工厂。 精度：: 0.25˝ (50 Pa), 0.5˝ (100 Pa), 2˝ (500 Pa), 5˝ (1250 Pa), 10˝ (2kPa), 15˝ (3 kPa), 25˝ (5 kPa) 的精度为±1% ；0.1˝ (25 Pa), 1˝ (250 Pa)和所有双向量程的范围 精度为±2%。 稳定性： ±1% / year FSO。 温度范围： 0 to 150°F (-18 to 66°C)。 压力范围：最大1psi，泄放压力10psi。 供电电源： 10 - 35 VDC (2线); 17 - 36 VDC 或隔离的 21.6 - 33VAC (3线)。 输出信号： 4 to 20 mA (2线); 0 - 5 V, 0 - 10 V (3线).。 响应时间：0.5到15秒可调。时间常数：1.5秒到45秒达到95% 零点和量程的调整：数字按键 Ω。 电流消耗：最大40mA。 显示（可选）：4位LCD。 电气连接： 4-20 mA, 2线: 欧式接线排，用于线型16 -26 AWG。 0-10 V, 3线: 欧式接线排，用于线型16 -22 AWG。 接线管: 1/2˝ NPS螺纹。 配件 (A-151): 用于5-10mm直径的电缆密封头 过程连接： 3/16˝ 内径管 (5 mm内径)。最大外径9mm。 外壳防护： NEMA 4X (IP66)。 安装方向：隔膜垂直方向。 重量： 8.0 oz (230 g)。 认证：CE。
SS34B中文资料
TAITRON COMPONENTS MEXICO, S.A .DE C.V.
BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190
Instantaneous Reverse current (mA) IR Reverse Leakage Current (mA)
Number of Cycles at 60Hz Fig.4- Typical Reverse Characteristics
Instantaneous Forward Voltage (V) Percentage of Peak Reverse Voltage (%) Fig.5- Typical Junction Capacitance
IF(AV) Average Rectified Current (A) Instantaneous Forward current (A)
Fig.2- Max. Non-Repetitive Forward Surge Current
Ambient Temperature Ta (°C) Fig.3- Typical Forward Characteristics
TAITRON COMPONENTS INCORPORATED REPRESENTAÇÕES DO BRASIL LTDA
RUA DOMINGOS DE MORAIS,ห้องสมุดไป่ตู้2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052
SS310中文资料
Dimensions in inches and (millimeters)Version: B07SS32 - SS3153.0 AMPS. Surface Mount Schottky Barrier RectifiersSMC/DO-214ABFeaturesFor surface mounted application Easy pick and placeMetal to silicon rectifier, majority carrier conduction Low power loss, high efficiency High current capability, low VF High surge current capabilityPlastic material used carriers Underwriters Laboratory Classification 94V-0 Epitaxial constructionHigh temperature soldering: 260o C / 10 seconds at terminalsMechanical DataCase: JEDEC DO-214AB Molded plastic Terminals: Pure tin plated, lead free Polarity: Indicated by cathode bandPackaging: 16mm tape per EIA STD RS-481Weight: 0.21 gramMaximum Ratings and Electrical CharacteristicsRating at 25o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%Type NumberSymbol SS 32 SS 33 SS 34 SS 35 SS 36 SS 39 SS 310 SS 315 Units Maximum Recurrent Peak Reverse Voltage V RRM 20 304050 60 90100 150 V Maximum RMS VoltageV RMS 14 212835 42 6370105 V Maximum DC Blocking VoltageV DC 20 304050 60 90100 150 VMaximum Average Forward Rectified Current at T L (See Fig. 1)I (AV) 3.0 APeak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method )I FSM100 70 AMaximum Instantaneous Forward Voltage(Note 1) IF= 3.0A @ 25oC @ 100o CV F 0.5 0.4 0.75 0.65 0.85 0.70 0.95 0.80V0.5 0.1 Maximum DC Reverse Current @ T A =25 oC atRated DC Blocking Voltage @ T A =125 oC I R 10 5 0.5 mAmA Typical Thermal Resistance ( Note 2 )R θJL R θJA17 55 oC/WOperating Temperature RangeT J -55 to +125 -55 to +150oC Storage Temperature Range T STG -55 to +150 oCRATINGS AND CHARACTERISTIC CURVES (SS32 THRU SS315)o T R A N S C I E N T T H E R M A L I M P E D A N C E , (C /W )10.010.1101000.1101100t, PULSE DURATION, (sec)FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARDP E A KF O R W A R D S U RG E C U R R E N T . (A )100806040200NUMBER OF CYCLES AT 60HzFIG.1- MAXIMUM FORWARD CURRENT DERATI NG CURVEA V E R A GE F O R W A R D C U R R E N T . (A )oLEAD TEMPERATURE. (C)FIG.3- TYPICAL FORWARD CHARACTERISTICSI N S T A N T A N E O U S F O R W A R D C U R R E N T . (A )0.20.40.60.8 1.0 1.2 1.4 1.61FORWARD VOLT AGE. (V)FIG.4- TYPICAL REVERSE CHARACTERISTICSI N S T A N T A N E O U S R E V E R S E C U R R E N T . (m A )20406080100120140110PERCENT OF RATED PEAK REVERSE VOLT AGE. (%)FIG.5- TYPICAL JUNCTION CAPACIT ANCEJ U N C T I O N C A P A C I T A N C E .(p F )101000REVERSE VOLTAGE. (V)Version: B07FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS。
W25Q64中文资料精编版
W25Q64BV出版日期：2010年7月8日- 1 - 版本E64M位与串行闪存双路和四路SPIW25Q64BV- 2 -目录1，一般DESCRIPTION (5)2。
FEATURES (5)3引脚配置SOIC208-MIL.......................................... .. (6)4，焊垫配置WSON8X6-MM.......................................... . (6)5，焊垫配置PDIP300-MIL.......................................... . (7)6引脚说明SOIC208密耳，PDIP300密耳和WSON8X6-MM................................ 7......7引脚配置SOIC300mil的.......................................... .. (8)8引脚SOIC封装说明300-MIL (8)8.1包装Types (9)8.2片选(/CS) (9)8.3串行数据输入，输出和IO（DI，DO和IO0，IO1，IO2，IO3）............................. 9.......8.4写保护(/WP) (9)8.5控股(/HOLD) (9)8.6串行时钟(CLK) (9)9座DIAGRAM (10)10功能DESCRIPTION (11)10.1 SPI OPERATIONS (11)10.1.1标准SPI Instructions (11)10.1.2双SPI Instructions (11)10.1.3四路SPI Instructions (11)10.1.4保持功能 (11)10.2写保护 (12)10.2.1写保护Features (12)11，控制和状态寄存器............................................ .. (13)11.1状态REGISTER (13)11.1.1 BUSY (13)11.1.2写使能锁存(WEL) (13)11.1.3块保护位（BP2，BP1，BP0）..................................... .. (13)11.1.4顶/底块保护（TB）....................................... .................................................. ..1311.1.5部门/块保护(SEC) (13)11.1.6状态寄存器保护（SRP，SRP0）....................................... . (14)11.1.7四路启用(QE) (14)11.1.8状态寄存器内存保护........................................... .. (16)11.2 INSTRUCTIONS (17)11.2.1制造商和设备标识........................................... .. (17)11.2.2指令集表1 (18)W25Q64BV11.2.3指令表2（阅读说明书）....................................... (19)出版日期：2010年7月8日- 3 - 修订版E11.2.4写使能(06h) (20)11.2.5写禁止(04h) (20)11.2.6读状态寄存器1（05H）和读状态寄存器2（35H）.............................. (21)11.2.7写状态寄存器（01H）......................................... .................................................. .. (22)11.2.8读取数据(03h) (23)11.2.9快速阅读(0Bh) (24)11.2.10快速读双输出（3BH）........................................ .................................................. 0.25 11.2.11快速读四路输出（6BH）........................................ .. (26)11.2.12快速读双I / O (BBh) (27)11.2.13快速读取四I/ O (EBh) (29)11.2.14八进制字读取四I/ O（E3H）..................................... (31)11.2.15页编程(02h) (33)11.2.16四路输入页编程（32H）........................................ . (34)11.2.17扇区擦除（20H） (35)11.2.1832KB的块擦除（52H） (36)11.2.1964KB的块擦除(D8h) (37)20年2月11日芯片擦除（C7H/ 60h) (38)21年2月11日擦除挂起(75h) (39)22年2月11日擦除恢复(7Ah) (40)23年11月2日掉电(B9h) (41)24年2月11日高性能模式（A3H）......................................... (42)25年2月11日发布掉电或高性能模式/设备ID（ABH） (42)26年2月11日读制造商/设备ID（90H）....................................... . (44)27年2月11日阅读唯一的ID号（4BH）........................................ . (45)28年2月11日读JEDEC的ID (9Fh) (46)29年2月11日连续读取模式复位（FFH或FFFFH）...................................... .. (47)12，电气特性.............................................. (48)12.1绝对最大Ratings (48)12.2操作范围 (48)12.3上电时序和写抑制阈值......................................... (49)12.4直流电气Characteristics (50)12.5 AC测量条件.............................................. .. (51)12.6 AC电气Characteristics (52)12.7 AC电气特性（续）......................................... . (53)12.8串行输出Timing (54)12.9输入Timing (54)12.10持有Timing (54)13包装SPECIFICATION (55)W25Q64BV13.18引脚SOIC208密耳（包装代号SS）..................................... .. (55)- 4 -13.28引脚PDIP300密耳（封装代码DA）..................................... (56)13.38触点WSON8x6毫米（封装代码ZE）....................................... (57)13.416引脚SOIC300密耳（封装代码SF）..................................... . (58)14订货INFORMA TION (59)14.1有效的部件号和顶端标记.......................................... (60)15版本HISTORY (61)W25Q64BV出版日期：2010年7月8日- 5 - 修订版E1概述该W25Q64BV（64M位）串行Flash存储器提供了有限的系统存储解决方案空间，引脚和电源。
螺栓中英文对照
螺栓中英文对照：六角螺丝(栓) HEX HEAD CAP SCREWS(HEX BOLTS)六角机械螺丝 HEX HEAD MACHINE BOLTS六角木牙螺丝 HEX LAG BOLTS四角螺丝 SQUARE HEAD BOLTST头螺丝 T HEAD BOLTS马车螺丝 CARRIAGE BOLTS环首螺丝 EYE BOLTS内六角孔螺丝 HEX SOCKET CAP SCREWS固定螺丝 SET SCREWS螺椿栓 STUD BOLTS螺旋椿 SCREW STUDS轮壳螺栓 WHEEL BOLTS翼形螺丝 WING SCREWS自攻螺丝 SELF TAPPING SCREWS自削螺丝 THREAD CUTTING SCREWS钻尾螺丝 SELF DRILLING SCREWS旋入螺丝 DRIVE SCREWS机械螺丝 MACHINE SCREWS木螺丝 WOOD SCREWS家具螺丝 FURNITURE SCREWS塑板螺丝 CHIPBOARD SCREWS墙用螺丝 DRYWALL SCREWS基础螺栓 FOUNDATION BOLTSU型螺栓 U BOLTS勾头螺栓 HOOK BOLTS套挂螺丝 TOGGLE BOLTS突缘螺丝 FLANGE BOLTS轨道螺栓(鱼尾螺丝) TRACK BOLTS耐候钢螺丝 CORTEN STEEL HEAVY HEX BOLTS扭矩控制螺栓 T.C.BOLTS高张力螺栓 HIGH STRENGTH BOLTS剪力钉(焊接螺丝) WELDING STUDS螺丝附华司组合 SCREWS AND WASHERS ASSEMBLED(SEMS)大尺寸螺栓 BIG SIZE BOLTS不锈钢小螺丝 STAINLESS STEEL SHEET METAL SCREWS 不锈钢大螺丝 STAINLESS STEEL BOLTS铜螺丝 BRASS SCREWS铝螺丝 ALUMINUM SCREWS合金钢螺丝 ALLOY STEEL SCREWS电子螺丝 ELECTRONIC SCREWS微小精密螺丝 MICRO SCREWS塑胶螺丝 PLASTIC SCREWS复合材料用螺丝 PARTICLE BOARD SCREWS钛合金螺丝 TITANIUM ALLOY BOLTS钛、锆、钼、铌等螺丝、零件、材料 TI,ZR,MO,NB PARE METAL BOLTS PARTS 拇指螺丝 THUMB SCREWS双头牙螺丝 DOUBLE END SCREWS HANGER BOLT车辆(汽车)螺丝、螺帽 AUTOMOTIVE FASTENERS航太用螺丝 AEROSPACE FASTENERS飞机特殊扣件 SOURCE CONTROL BOLTS拉栓 BLIND BOLTS面板螺丝 PANEL FASTENERS电梯螺丝 ELEVATOR BOLTS四角头固定螺丝 SQUARE SET SCREWS大头马车螺丝 STEP BOLTS单向螺丝 ONE WAY LAG SCREWS管夹螺丝 HOSE CLAMP SCREWS不锈钢内六角螺丝 STAINLESS STEEL HEX SOCKET CAP SCREWS铰链螺丝 HINGE SCREWS货柜螺丝 CONTAINER SCREWS复合材料钻尾螺丝 BI-METAL SELF DRILLING SCREWS三角牙螺丝 TRILOBULAR THREAD SCREWS高低牙螺丝 HIGH LOW SCREWS夹板用螺丝 PARTICLE BOARD SCREWS马桶螺丝 TOILET CLOSET BOLTS特长螺丝 SPECIAL LONGER SCREWS建业螺丝 BUILDING FASTENERS其它特殊螺丝 SPECIAL SCREWS OR BOLTS不锈钢特殊螺丝 SPECIAL STAINLESS STEEL SCREWS宽牙螺丝（粗牙螺丝） COARSE THREAD SCREWS链带螺丝 COLLATED SCREWS水泥螺丝 CONCRETE SCREWS板模螺丝 CONSTRUCTION BOLTS涞□萁z DIE CAST WING SCREWS; ZINC ALLOY重型车螺丝 HEAVY DUTY WHEEL HUB BOLTS内六角固定螺丝 HEX SOCKET SET SCREWS复合材料用螺丝（夹板用） PARTICLE BOARD SCREWS犁壁螺丝 PLOW BOLTS机(踏)车用螺丝、轴心 SCREWS AND SHAFTS FOR MOTORCYCLE OR BICYCLE针车用螺丝、轴心 SCREWS AND SHAFTS FOR SEWING MACHING止付螺丝 SOCKET SET SCREWS不锈钢宽牙螺丝 STAINLESS STEEL COARSE THREAD SCREWS不锈钢高低牙螺丝 STAINLESS STEEL HIGH-LOW THREAD SCREWS不锈钢机械螺丝 STAINLESS STEEL MACHINE SCREWS不锈钢钻尾螺丝 STAINLESS STEEL SELF DRILLING SCREWS不锈钢自攻螺丝 STAINLESS STEEL SELF TAPPING SCREWS不锈钢自削螺丝 STAINLESS STEEL THREAD CUTTING SCREWS不锈钢三角牙螺丝 STAINLESS STEEL TRI-LOBULAR THREAD SCREWS 不锈钢木螺丝 STAINLESS STEEL WOOD SCREWS套挂螺栓及螺丝 TOGGLE BOLTS钛合金膨胀螺丝 TITANIUM ALLOY EXPANSION BOLTSNo.单词简写中文1screw scr螺丝CSK screw 埋头螺丝2nut nut螺母3washer wash垫圈4head hd头Hexagon hex(a) 六角High Control H.C. 限长/高5thread th（re）螺纹Socket soc、sckt 窝，槽，穴6coating coat镀层7rivet riv铆钉8standoff stdoff内外六角钉9driver driv穴10hexagon hexa六角11tooth tooth齿12lock lck锁13spring spr弹簧14wave wave波浪型15pitch pitch牙距16partial thread P T半螺纹17PT PT一种螺纹形式18Full Thread FT全螺纹19silver silv银20cone cone锥形21Eco-syn Eco 30度牙的一种螺纹22Thread Forming TF自攻螺纹24pin pin销25shaft Shaf轴26steel St铁27stainless steel SS不锈钢28Brass(Cu) Bras(Cu)铜29Aluminum AL铝30Rubber Rub橡胶31machine screw mech scr机制螺丝32SEM screw SEM Scr组合螺丝33Material material材料34Grade GD等级35Finish Finish表面处理36Point Point点37Clamp Clam夹子38internal Int内39external ext外40thickness /厚度41length/长度42hole/孔43Metric Metcric公制48NFE /法标Welcome To Download欢迎您的下载，资料仅供参考！。
lm3150 中文资料手册
LM3150LM3150 SIMPLE SWITCHER ® CONTROLLER, 42V Synchronous Step-DownLiterature Number: ZHCS5332008年10月17日LM3150SIMPLE SWITCHER ®42V 同步降压控制器概述特性■■■■■■■■■■■■■典型应用■■■■■典型应用30053101SIMPLE SWITCHER ® 是美国国家半导体的注册商标美国国家半导体版权所有© 2008 本文是National Semiconductor 英文版的译文，本公司不对翻译中存在的差异或由此产生的错误负责。
如需确认任何内容的准确性，请参考本公司提供的英文版。
LM3150 SIMPLE SWITCHER ®42V 同步降压控制器LM3150 SIMPLE SWITCHER ® 控制器是一款简单易用，且可在典型应用中提供达12A 输出电流的简易降压电源控制器。
工作输入电压范围为6V-42V 的LM3150的输出电压可按需要而调整，最低可达0.6V 。
开关频率可调节至达1 MHz ，且同步架构提供了更高效的设计。
具有已注册专利的仿纹波模式(ERM)控制技术的LM3150控制器采用固定导通时间(COT)结构，可使用低等效串联电阻(ESR)输出电容器，从而降低了整体设计方案尺寸和输出电压纹波。
固定导通时间(COT)调节结构具有特快的瞬态响应，且无需外置环路补偿，有助于减少外置元件数和降低设计复杂性。
故障保护特性，比如热关断、欠压锁定、过压保护、短路保护、电流限制以及输出电压预偏压启动使一种可靠且稳定的解决方案得以实现。
LM3150 SIMPLE SWITCHER ® 方案使用最少外置元件数和美国国家半导体的WEBENCH ®网上设计工具来完成整套易用设计。
WEBENCH ® 为每步设计过程提供设计支持，包括使用新的MOSFET 选择器进行外置元件计算、电气模拟、热模拟和建模板等特性。
关于螺丝的中英文对照-25页文档资料
(浏览56次) No. 英文单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread PT 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝（机牙螺丝）32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标螺丝相关参数英语对照A: Machine Screw: 机械螺丝B: Tapping Screw: 自攻螺丝 (分使用于金属与使用于塑料二种) B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. ( 塑料用, 自攻螺丝)C: Wooden Screw : 木工螺丝D: Drywall Screw : 水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金 5052d. Brass: 黄铜e. Bronze: 青铜f. UNS C11000 Copper: 锑铜Finish Code: 外观处理规格Head Code: 头部外型螺丝型号 Drive Code: 头部剖沟,特征型号Length Code: 螺丝长度 (mm)A-1: Thread Code: 螺丝型号A-2: Length Code: 螺丝长度:A-3: Drive Code/ 头部剖沟,特征.a. Slotted: 一字 ( Minus )b. Phillips: 十字 ( Plus )c. Phil-Slot: 一字/十字d. Hex Scoket: 内六角e. One Way: 单向 (只可锁入,不可退出)A-4: Head Code/ 头部外型.a. Flat: 平头 (锁入后,顶部与工作件齐平)b. Oval: 色拉头c. Round: 圆头d. Pan: 圆扁头e. Truss: 大圆扁头f. Hex : 六角头A-5: Finish Code/ 外观处理.a. Z: Zine-Plated: 镀锌b. Ni: Ni-Plated: 镀镍c. Tin-Plated: 镀锡d. Zine Plated / Green Iridite: 镀锌绿膜处理.e. Radiant Plated: 镀五彩f. Passivate: 抗氧化处理.g. Alodial Finish: 无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter 直径Length 长度各类紧固件标准件产品英语翻译对照插片壁虎 Steel Ceiling Anchors内迫壁虎 Drop in Anchors碳钢锤钉壁虎 Steel Hit Anchors碳钢六角螺帽 Steel Hex Coupling Nuts强力车修壁虎 Wedge Anchors外迫壁虎 Cut Anchors化学壁虎 Chemical Anchors不锈钢重载胀栓 Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽 Tie Wire Anchors锌合金打入式壁虎 Hammer Drive Anchors弹簧螺帽 Strut Nuts兰花夹系列 Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎 Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎 Hollow Wall Anchors套管式壁虎 Sleeve Anchors打入式壁虎鱼形尼龙壁虎 Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎 Hit Anchors电梯壁虎 Bolt Anchors重载壁虎 Heavy duty anchors两片夹 Loxin Masonry Anchors定位螺栓 Set Bolts长型兰花夹 Short Strap Anchors工具棒 Drop in Setting Tools象脚壁虎 Elephant foot anchors水泥预埋件 Concrete Insert翻边胀轴 Drop in Anchor with Lip冲件 Legs Drywall Anchors六角盖头螺帽 Hex Cap Nuts六角锯齿螺帽 Hex Serrated Nuts六角轮缘螺帽 Hex Flange Nuts高脚螺帽 Hex Coupling Nuts(High Nuts) 圆螺帽 Round Nuts四角螺帽 Square Nuts管用螺帽 Pipe Nuts轮壳螺帽 Wheel Nuts蝶型螺帽 Wing NutsU形螺帽 U NutsT形螺帽 T Nuts环首螺帽 Eye Nuts齿形螺帽 Kep Nuts齿花螺帽 Clinch Nuts耐候钢六角重型螺帽 Corten Steel Heavy Hex Nuts焊接螺帽 Weld Nuts高张力螺帽 Heigh Strength Nuts建业用螺帽 Structural Nuts不锈钢螺帽 Stainless Steel Nuts铜螺帽 Brass Nuts铝螺帽 Aluminum Nuts合金钢螺帽 Alloy Steel Nuts重型车螺帽 Heavy Duty Wheel Hub Nuts铁器焊接袋帽 Acorn Cap Nuts金属预置扭矩式螺帽 All-Metal Prevailing Torque Type Nuts 壁虎螺帽 Anchor Nuts大尺寸螺帽 Big Size Nuts铁盖袋帽 Closed End Acorn Nuts盘形华司螺帽 Conical Washer Nuts铁盖+尼龙圈组合盖帽 Din 986 Domed Cap Nuts突缘尼龙盖帽 Flange Nylon Insert Lock Nuts平面华司螺帽 Flat Waser Nuts六角割沟螺帽 Hex Slotted Nut自锁螺帽 Self-Locking Nuts制止螺帽 Sliding NutsSln-自动防松螺帽 Sln Self-Locking Nuts其它特殊螺帽 Special Nuts弹簧螺帽 Spring Nuts不锈钢突缘螺帽 Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽 Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽 Stainless Steel Heavy Hex Nuts不锈钢六角螺帽 Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽 Stainless Steel Nylon Insert Lock Nuts普通六角螺帽 Hex Nuts六角重型螺帽 Heavy Hex Nuts薄型螺帽 Hex Jam Nuts尼龙嵌入防松螺帽 Nylon Insert Lock Nuts机械螺丝用六角螺帽 Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝 Hex Head Machine Bolts六角木牙螺丝 Hex Lag Bolts四角螺丝 Square Head BoltsT头螺丝 T Head Bolts马车螺丝 Carriage Bolts环首螺丝 Eye Bolts内六角孔螺丝 Hex Socket Cap Screws固定螺丝 Set Screws螺椿栓 Stud Bolts螺旋椿 Screw Studs轮壳螺栓 Wheel Bolts翼形螺丝 Wing Screws自攻螺丝 Self Tapping Screws自削螺丝 Thread Cutting Screws钻尾螺丝 Self Drilling Screws旋入螺丝 Drive Screws机械螺丝 Machine Screws木螺丝 Wood Screws家具螺丝 Furniture Screws塑板螺丝 Chipboard Screws墙用螺丝 Drywall Screws基础螺栓 Foundation BoltsU型螺栓 U Bolts勾头螺栓 Hook Bolts套挂螺丝 Toggle Bolts突缘螺丝 Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝 Corten Steel Heavy Hex Bolts 扭矩控制螺栓 T.C.Bolts高张力螺栓 High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合 Screws And Washers Assembled(Sems)大尺寸螺栓 Big Size Bolts不锈钢小螺丝 Stainless Steel Sheet Metal Screws不锈钢大螺丝 Stainless Steel Bolts铜螺丝 Brass Screws铝螺丝 Aluminum Screws合金钢螺丝 Alloy Steel Screws电子螺丝 Electronic Screws微小精密螺丝 Micro Screws塑料螺丝 Plastic Screws复合材料用螺丝 Particle Board Screws钛合金螺丝 Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料 Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝 Thumb Screws双头牙螺丝 Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽 Automotive Fasteners航天用螺丝 Aerospace Fasteners飞机特殊扣件 Source Control Bolts拉栓 Blind Bolts面板螺丝 Panel Fasteners电梯螺丝 Elevator Bolts四角头固定螺丝 Square Set Screws大头马车螺丝 Step Bolts单向螺丝 One Way Lag Screws管夹螺丝 Hose Clamp Screws不锈钢固定螺丝 Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝 Stainless Steel Hex Socket Cap Screws 铰链螺丝 Hinge Screws货柜螺丝 Container Screws复合材料钻尾螺丝 Bi-Metal Self Drilling Screws三角牙螺丝 Trilobular Thread Screws高低牙螺丝 High Low Screws夹板用螺丝 Particle Board Screws马桶螺丝 Toilet Closet Bolts特长螺丝 Special Longer Screws建业螺丝 Building Fasteners不锈钢六角螺丝 Stainless Steel Hex Socket Cap Screws 其它特殊螺丝 Special Screws Or Bolts不锈钢特殊螺丝 Special Stainless Steel Screws宽牙螺丝（粗牙螺丝） Coarse Thread Screws链带螺丝 Collated Screws水泥螺丝 Concrete Screws板模螺丝 Construction Bolts锌蝶螺丝 Die Cast Wing Screws; Zinc Alloy重型车螺丝 Heavy Duty Wheel Hub Bolts内六角固定螺丝 Hex Socket Set Screws复合材料用螺丝（夹板用） Particle Board Screws 犁壁螺丝 Plow Bolts不锈钢木螺丝 Stainless Steel Wood Screws套挂螺栓及螺丝 Toggle Bolts钛合金膨胀螺丝 Titanium Alloy Expansion Bolts六角盖头螺帽 Hex Cap Nuts六角锯齿螺帽 Hex Serrated Nuts六角轮缘螺帽 Hex Flange Nuts高脚螺帽 Hex Coupling Nuts(High Nuts)圆螺帽 Round Nuts四角螺帽 Square Nuts管用螺帽 Pipe Nuts轮壳螺帽 Wheel Nuts蝶型螺帽 Wing NutsU形螺帽 U NutsT形螺帽 T Nuts环首螺帽 Eye Nuts齿形螺帽 Kep Nuts齿花螺帽 Clinch Nuts耐候钢六角重型螺帽 Corten Steel Heavy Hex Nuts焊接螺帽 Weld Nuts高张力螺帽 Heigh Strength Nuts建业用螺帽 Structural Nuts不锈钢螺帽 Stainless Steel Nuts铜螺帽 Brass Nuts铝螺帽 Aluminum Nuts合金钢螺帽 Alloy Steel Nuts重型车螺帽 Heavy Duty Wheel Hub Nuts铁器焊接袋帽 Acorn Cap Nuts金属预置扭矩式螺帽 All-Metal Prevailing Torque Type Nuts 壁虎螺帽 Anchor Nuts大尺寸螺帽 Big Size Nuts铁盖袋帽 Closed End Acorn Nuts盘形华司螺帽 Conical Washer Nuts铁盖+尼龙圈组合盖帽 Din 986 Domed Cap Nuts突缘尼龙盖帽 Flange Nylon Insert Lock Nuts平面华司螺帽 Flat Waser Nuts六角割沟螺帽 Hex Slotted Nut自锁螺帽 Self-Locking Nuts制止螺帽 Sliding NutsSln-自动防松螺帽 Sln Self-Locking Nuts其它特殊螺帽 Special Nuts弹簧螺帽 Spring Nuts不锈钢突缘螺帽 Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽 Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽 Stainless Steel Heavy Hex Nuts不锈钢六角螺帽 Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽 Stainless Steel Nylon Insert Lock Nuts锌压属螺帽 Zinc Die Casting Nuts普通六角螺帽 Hex Nuts六角重型螺帽 Heavy Hex Nuts薄型螺帽 Hex Jam Nuts尼龙嵌入防松螺帽 Nylon Insert Lock Nuts机械螺丝用六角螺帽 Hex Machine Screw Nut合金钢线材盘元 Alloy Steel Wire Rod球状化线材 Annealing Wire And Rod黑铁丝 Black Wire黄铜棒线 Brass Wire And Rod磨光棒钢 Bright Steel Bar(Hex/Round/Square)铜合金线 Copper Alloy Wire线切割线 E.D.M Cutting Wire快削钢线材盘元 Free Cutting Steel Wire Rod线材 Iron Or Steel Wire线材盘元 Iron Or Steel Wire Rod洋白铜线 Nickel Silver Wire磷青铜线 Phosphate Bronze Wire不锈钢条棒 Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材 Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材 Stainless Steel Wire不锈钢线材及盘元 Stainless Steel Wire And Rod棒钢 Steel Bar(Hex/Round/Square)转回90度碾线头机 90讧evolving Wire Twisting Machine气动拉钉机 Air Riveter各式螺丝类产品自动包装 Automatic Packaging For All Kinds Of Packaging自动包装机 Automatic Packing Machine螺丝制造搓牙机械 Automatic Thread Rolling Machine螺丝割尾加工机械 Automatic Thread Slotting Machine螺丝制造成型机械 Automatic Trimming Machine拉钉打头机 Blind Rivet Heading Machine螺丝、螺帽成型机 Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理 Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉 Bolt Nut And Screws Heat Treatment Furnaces 球状化电器炖炉 Carburizing Furnace Vacuum And Bell Type Furnace 超防锈复合瓷膜 Ceramic Coating连续式光辉渗碳淬火炉 Continuous Bright Carburizing Quenching Furnace连续式光辉调质淬火炉 Continuous Bright Hardening Quenching Furnace中、高热镀锌光辉连续炉 Continuous Bright Heat Treat Furnace连续式光辉热处理炉 Continuous Type Bright Heat Treatment Furnace 螺丝割尾及特殊割遘加工 Machine Screw Shank Slotting螺丝钻孔加工 Screw Shank Drilling鸡眼上下模 Eyelets Dies一般线材、盘元、退火炉 General Wire,Wire Rod,Annealing Furnace 倒立式滑落型伸线机 Handstand Type Wire Drawing Machine十字冲模 Header Punches In Various Drives成型冲模 Header Punches In Various Drives螺丝打头机 Heading Machine螺丝制造高速搓牙机械 High Speed Automatic Thread Rolling Machine 高中低周波感应加热炉 High,Medium,Low Frequency Induction Heater 空心打头机 Hollow Heading Machine热浸镀锌螺丝、螺帽 Hot Dip Galvanizing Bolts And Nuts机械镀锌 Mechanical Galvanized迷你成型机 Mini-Formers成品自动收线机 Non-Stop Coiler精抽自动收线机 Non-Stop Coiler(Skinpass)螺帽模 Nut Forming Dies螺帽成型模 Nuts Formers特殊零件成型机 Parts Forming Maching冲模 Punch Dies冲子 Punch Pins罗拉成型机 Rollers Formers机(踏)车用螺丝成型机 Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机 Set Screws Formers套高成型机 Sockets Formers一般线材、盘元、螺丝合金炖炉 Spheroidizing Bright Annealing Furnace 球状化热处理炉 Spheroidizing Heat Treatment Furnace攻牙机 Tapping Machine螺丝攻、车刀、模具 Taps Dies And Tools搓牙机铁屑分离装置 Thread Chip Separator滚牙轮 Thread Rolling Dies牙板 Thread Rolling Dies Plates精密油压滚牙机 Hydraulic Thread Rolling Machines模具 Tools六角整头模 Trimming Dies Hexagan碳化钨模具 Tungsten Carbide Die镀钛处理(Tin)专业加工服务 Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料 Various Electroplating Chemicals环规校正 Calibration For Ring Gage环规、牙规、三线规校正 Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器 Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油 Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验 Insptection Services For Fasteners And Hardware德国schatz扭力机代理 Representative Of Schatz Torque Machin Iso品质保证系统 Iso Quality Assurance System生产管理系统 Production Control System物料管理系统 Material Control System齿轮 Gears不锈钢牙条棒 Stainless Steel Hread Rod马达轴承轴心组件 Bearing Shaft(Motor)轴承轴心 Bearing Shaft开口铆钉 Blind Rivets长形拉帽 Blind Rivet Nuts拉帽 Blind Nuts拉钉 Blind Rivets实心梢 Clevis Pins And Straight Pins弹片 Clips卷钉 Coil Nails冷锻零件 Cold Forming Part开口销 Cotter PinsE型环 E-Rings膨胀螺栓 Expansion Anchor Bolts鸡眼钉 Eyelets RivetsR型销 Snap Pins闸、锁 Latches And Keeper Assembleds其它特殊铆钉 Other Specil Rivets销 Pins格式管夹、管束 Pipe Hanger铆钉 Rivets螺旋锔及螺旋圈 Screw Hook And Screw Rings 中空钉 Semi-Tubular Rivet开叉钉 Split Drive Anchors弹簧华司 Spring Washers弹簧蝴蝶夹 Spring Wings不锈钢华司 Stainlesssteel Washers钢铁钉 Steel And Iron Nails搓牙铁钉 Thread Nails钛合金铆钉 Titaium Alloy Rivets管形铆钉 Tubular Rivets华司 Washers真空热处理 Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件 Fasteners合金钢工具 Alloy Steel Tools螺栓模 Bolt Heading Dies手动拉钉钳 Hand Riveter船舶链 Anchor Chain脚踏车链锁 Bicycle Chain Locks螺丝起子 Bit罗拉 Chain Roller特殊铆合扣件 Collars(A Blindfastener For Huck Intl) 装饰链 Decorative Chains自攻螺纹衬套 Ensat Threaded Inserts六角扳手 Hexagon Keys超音螺纹压入式螺纹自动锁扣 Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件 Special Auto-Mobile Fastener As Your Needs螺纹护套 Recoil Inserts链条用滚子 Roller For Roller Chain金属板镶嵌组件及自动夹扣组件 Sheet Metal Fasteners工具套筒组件 Socket Wrench Sets不锈钢链 Stainless Steel Chains轭子 T-Yoke轮胎链 Tire Chains狗链 Dog Chains喇叭头轭铁 U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道 Stainless Wheel's Rack For Transporter工业用链 Industrial Steel Link Chains拖链安全链 Tow Chains And Safety Chains机车离合器零件 Manufacture Of Motorcycle's Cvt Parts牙条棒 Thread Rod机(踏)车用螺丝、轴心 Screws And Shafts For Motorcycle Or Bicycle 针车用螺丝、轴心 Screws And Shafts For Sewing Maching止付螺丝 Socket Set Screws不锈钢宽牙螺丝 Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝 Stainless Steel High-Low Thread Screws不锈钢机械螺丝 Stainless Steel Machine Screws不锈钢钻尾螺丝 Stainless Steel Self Drilling Screws不锈钢自攻螺丝 Stainless Steel Self Tapping Screws不锈钢自削螺丝 Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝 Stainless Steel Tri-Lobular Thread Screws MFNI 克叻MFZN 锌Na tural 本色Nikel 叻B-TITE 三角身自攻B型牙P-TITE II 三角身自攻P型双丝牙Nylock 耐落No Nylock 无耐落Case hardness：HV430-530 表面硬度：HV430-530Core hardness：HV210-410 心部硬度：HV210-410Case depth：0.04-0.10mm 渗碳层厚度:0.04-0.10mmProduct compliance with RoHS requirement 产品符合RoHS要求希望以上资料对你有所帮助，附励志名言3条：：1、世事忙忙如水流，休将名利挂心头。
AD7656中文资料
250 kSPS 、六通道、同步采样、双极性16/14/12-位 ADCAD7656/AD7657/AD7658Rev. D Information furnished by Analog Devices is believed to be accurate and reliable. However , no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Speci cations subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. T rademarks and registered trademarks are the property of their respective owners.One Technology Way, P.O.Box 9106, Norwood, MA 02062-9106, U.S.A.Tel: 781.329.4700 Fax: 781.461.3113 2006–2012 Analog Devices, Inc. All rights reserved.功能框图V SSDGNDV DDREFCONVST ACONVST B CONVST C OUTPUT DRIVERSOUTPUT DRIVERSOUTPUT DRIVERSOUTPUT DRIVERSCONTROL LOGICBUFBUFBUFAGNDT/HT/H T/H T/HT/HT/HCLK OSCAV CCDV CCV1V2V3V4V5V6SER/PAR CSV DRIVE STBYDOUT ADOUT BDOUT C SCLKRD WRDATA/CONTROL LINES 05020-001AD7656/AD7657/AD765816-/14-/12-BIT SAR16-/14-/12-BIT SAR16-/14-/12-BIT SAR16-/14-/12-BIT SAR16-/14-/12-BIT SAR16-/14-/12-BIT SAR图1.-1受美国专利第6,731,232号保护。
STD12NF06LT4中文资料
February 2007 Rev 61/14STD12NF06L STD12NF06L-1N-channel 60V - 0.08Ω - 12A - DP AK - IP AKSTripFET™ II Power MOSFETGeneral features■Exceptional dv/dt capability ■Low gate chargeDescriptionThis Power MOSFET is the latest development of STMicroelectronics unique "Single Feature Size™" strip-based process. The resultingtransistor shows extremely high packing density for low on-resistance, rugged avalanchecharacteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.Applications■Switching applicationType V DSSS R DS(on)I D STD12NF06L STD12NF06L-160V 60V<0.1Ω<0.1Ω12A 12AOrder codesPart number Marking Package Packaging STD12NF06LT4D12NF06L DP AK Tape & reel STD12NF06L-1D12NF06LIP AKT ubeContents STD12NF06LContents1Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42.1Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132/14STD12NF06L Electrical ratings3/141 Electrical ratingsTable 1.Absolute maximum ratingsSymbol ParameterValue Unit V DS Drain-source voltage (V GS = 0)60V V DGR Drain-gate voltage (R GS = 20K Ω)60V V GS Gate-source voltage± 16V I D Drain current (continuous) at T C = 25°C 12A I D Drain current (continuous) at T C =100°C 8.5A I DM (1)1.Pulse width limited by safe operating area Drain current (pulsed)48A P TOTTotal dissipation at T C = 25°C 30W Derating factor0.2W/°C dv/dt (2)2.I SD ≤ 12A, di/dt ≤ 200A/µs, V DS ≤ 40V , T J ≤ T JMAX Peak diode recovery voltage slope 15V/ns E AS (3)3.Starting T J = 25 o C, I D = 6A, V DD = 30VSingle pulse avalanche energy 100mJ T stg Storage temperature-55 to 175°CT JMax. operating junction temperatureTable 2.Thermal dataSymbol ParameterValue Unit R thJC Thermal resistance junction-case Max 5°C/W R thJA Thermal resistance junction-ambient Max 100°C/W T lMaximum lead temperature for solderingpurpose275°CElectrical characteristics STD12NF06L4/142 Electrical characteristics(T CASE =25°C unless otherwise specified)Table 3.On/off statesSymbol ParameterTest conditions Min.Typ.Max.Unit V (BR)DSSDrain-source breakdownvoltageI D = 25mA, V GS = 060V I DSSZero gate voltage drain current (V GS = 0)V DS = Max rating V DS = Max rating, T C = 125°C 110µA µAI GSS Gate body leakage current (V DS = 0)V GS = ±20V±100nA V GS(th)Gate threshold voltage V DS = V GS , I D = 250µA 12V R DS(on)Static drain-source on resistanceV GS = 10V , I D = 6A V GS = 5V , I D = 6A0.080.100.100.12Ω ΩTable 4.DynamicSymbol ParameterTest conditions Min.Typ.Max.Unit g fs (1)1.Pulsed: pulse duration=300µs, duty cycle 1.5%Forward transconductance V DS = 25V , I D = 6A 7S C iss C oss C rss Input capacitance Output capacitance Reverse transfer capacitance V DS = 25V , f = 1 MHz, V GS = 03507530pF pF pF Q g Q gs Q gdTotal gate charge Gate-source charge Gate-drain chargeV DD = 48V , I D = 12A V GS = 5V7.52.53.010nC nC nCTable 5.Switching timesSymbol ParameterTest conditions Min.Typ.Max.Unit t d(on)t r t d(off)t fTurn-on delay time Rise timeTurn-off delay time Fall timeV DD = 30V , I D = 6A, R G = 4.7Ω, V GS = 4.5V Figure 12 on page 810352013ns ns ns nsSTD12NF06L Electrical characteristics5/14Table 6.Source drain diodeSymbol ParameterTest conditionsMinTyp.Max Unit I SD Source-drain current 12A I SDM Source-drain current (pulsed)48A V SD (1)1.Pulsed: pulse duration=300µs, duty cycle 1.5%Forward on voltage I SD = 12A, V GS = 0 1.5V t rr Q rr I RRMReverse recovery time Reverse recovery charge Reverse recovery currentI SD = 12A,di/dt = 100A/µs,V DD = 16V , T J = 150°C Figure 14 on page 850652.5ns µC AElectrical characteristics STD12NF06L6/142.1 Electrical characteristics (curves)Figure 1.Safe operating area Figure 2.Thermal impedanceFigure 3.Output characteristics Figure 4.Transfer characteristicsFigure 5.Transconductance Figure 6.Static drain-source on resistanceSTD12NF06L Electrical characteristics7/14Figure 7.Gate charge vs. gate-source voltage Figure 8.Capacitance variationsFigure 9.Normalized gate threshold voltageFigure 10.Normalized on resistance vs.Figure 11.Source-drain diode forwardTest circuit STD12NF06L8/143 Test circuitFigure 12.Switching times test circuit forFigure 13.Gate charge test circuitFigure 14.Test circuit for inductive loadFigure 15.Unclamped Inductive load testFigure 16.Unclamped inductive waveformSTD12NF06L Package mechanical data 4 Package mechanical dataIn order to meet environmental requirements, ST offers these devices in ECOPACK®packages. These packages have a Lead-free second level interconnect. The category ofsecond level interconnect is marked on the package and on the inner box label, incompliance with JEDEC Standard JESD97. The maximum ratings related to solderingconditions are also marked on the inner box label. ECOPACK is an ST trademark.ECOPACK specifications are available at: 9/14Package mechanical data STD12NF06L10/14STD12NF06L Package mechanical data11/14Packaging mechanical data STD12NF06L12/145 Packaging mechanical dataTAPE AND REEL SHIPMENTDPAK FOOTPRINTDIM.mm inch MIN.MAX.MIN.MAX.A 33012.992B 1.50.059C 12.813.20.5040.520D 20.20.795G 16.418.40.6450.724N 501.968T22.40.881BASE QTY BULK QTY 25002500REEL MECHANICAL DATADIM.mm inch MIN.MAX.MIN.MAX.A0 6.870.2670.275B010.410.60.4090.417B112.10.476D 1.5 1.60.0590.063D1 1.50.059E 1.65 1.850.0650.073F 7.47.60.2910.299K0 2.55 2.750.1000.108P0 3.9 4.10.1530.161P17.98.10.3110.319P2 1.9 2.10.0750.082R401.574W15.716.30.6180.641TAPE MECHANICAL DATAAll dimensions are in millimetersSTD12NF06L Revision history13/146 Revision historyTable 7.Revision historyDate RevisionChanges09-Sep-20044Complete document08-Aug-20065New template, no content change 19-Feb-20076T ypo mistake on page 1STD12NF06L14/14Please Read Carefully:Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.All ST products are sold pursuant to ST’s terms and conditions of sale.Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.UNL ESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SAL E ST DISCL AIMS ANY EXPRESS OR IMPL IED WARRANTY WITH RESPECT TO THE USE AND/OR SAL E OF ST PRODUCTS INCL UDING WITHOUT L IMITATION IMPL IED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNL ESS EXPRESSL Y APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.© 2007 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America。
SS110A中文资料
SYMBOL VRRM VRMS VDC I(AV)
SS12A 20 14 20
SS13A 30 21 30
SS14A 40 28 40
SS15A 50 35 50 1.0
SS16A 60 42 60
SS18A 80 56 80
SS110A 100 70 100
UNIT V V V A
IFSM VF IR CJ RθJL TJ TSTG 0.45 0.55 0.6
SS15A -SS16A SS18A -SS110A
100
1.0
T J = 25°C PULSE WIDTH 300us 1% DUTY CYCLE
T J=25℃ f=1MHZ
10 0.1 0 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 INSTANTANEOUS FORWARD VOLTAGE, (VOLTS) 0.1 1.0 4.0 10.0 100
●Case： Molded Plastic ●Polarity: lndicated by cathode band ●Weight: 0.002 ounces,0.053 grams
.103(2.62) .079(2.00)
.060(1.52) .030(0.76)
.208(5.28) .188(4.80)
.008(.203) .002(.051)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20%
SS34;SS36;S310;SS33;SS32;中文规格书,Datasheet资料
100
80
2
RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.55 x 0.55" (14 x 14) mm COPPER PAD AREAS
60
40
1
20
0
0
25
50 75 100 125 Ambient Temperature [ºC]
0
1
2
5 10 20 50 Number of Cycles at 60Hz
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
SS32-S310
SS32 - S310
Features • • • •
Metal to silicon rectifiers, majority carrier conduction. Low forward voltage drop. Easy pick and place. High surge current capability.
0.01
0
0.2
0.4 0.6 0.8 1 1.2 Forward Voltage, VF [V]
1.4
1.6
0.001
0
20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%]
SS34A中文资料
3.0A Surface MountSchottky Rectifier3.0A Surface Mount Schottky RectifierFeatures• Low profile surface mount package • Built-in strain relief • High switching speed• Low voltage drop, high efficiency• Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • RoHS compliantMechanical DataCase: JEDEC DO-214AC, Molded plastic bodyTerminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes the cathode end Weight:0.002 ounce, 0.064 gramMaximum Ratings & Electrical Characteristics (T Ambient =25ºC unless noted otherwise)SymbolsDescriptionSS32ASS 33ASS 34ASS 35ASS 36ASS 38ASS 39ASS 310AUnitConditionsV RRM Maximum Repetitive Peak Reverse Voltage20 30 40 50 60 80 90 100 V V RMS Maximum RMS Voltage14 21 28 35 42 56 63 70 VV DC Maximum DC Blocking Voltage 20 30 40 50 60 80 90 100 VI (AV)Maximum Average ForwardRectified Current (FIG.1)3.0AT L =105° C I FSM Peak Forward Surge Current 80 A8.3ms single half sine-wavesuperimposed on rated load(JEDEC Method)V F Maximum Instantaneous Forward Voltage at 3.0A0.50 0.75 0.85 V Note1 0.5 T A =25 °CI RMaximum DC Reverse Current at Rated DC Blocking Voltage20 10 mAT A =100 °C55R θJAR θJLTypical Thermal Resistance12° C/W Note 2SMA (DO-214AC)Fig.4- Typical Reverse CharacteristicsPercentage of Peak Reverse Voltage (%) Fig.1- Typical Forward Current Derating CurveAmbient Temperature Ta (°C) Fig.2- Max. Non-Repetitive Peak Forward Surge CurrentNumber of Cycles at 60Hz SymbolsDescriptionSS 32ASS 33ASS 34ASS 35ASS 36ASS 38ASS 39ASS310AUnitConditionsT J T STGOperating Junction and Storage Temperature Range-55 to +150° CNote: 1. Pulse test: 300µs pulse width, 1% duty cycle.2. PCB mounted with 0.55" x 0.55" (14mm x 14mm) copper pads.Typical Characteristics CurvesFig.3- Typical Instantaneous Forward Characteristics Instantaneous Forward Voltage (V)P e a k F o r w a r d S u r g e C u r r e n t (A )I n s t a n t a n e o u s F o r w a r d C u r r e n t (A )A v e r a g e F o r w a r d C u r r e n t (A )I n s t a n t a n e o u s R e v e r s e C u r r e n t (μA )Dimensions in inch (mm)J u n c t i o n C a p a c i t a n c e(p F )Fig.5- Typical Junction CapacitanceReverse Voltage (V)Soldering Pad in inch (mm)How to contact us:SMA。
FC21中文资料
Electrical Connection
B E/D S
C
80
G
ID -- VDS
[FET]
80
ID -- VDS
[FET]
Drain Current, ID -- mA
Drain Current, ID -- mA
60
VGS=0
--0.5V
--1.0V
60
VGS=0
--0.5V
40
40
--1.0V
100
ID -- VGS
[FET]
ID -- VGS
[FET]
VDS=10V
VDS=10V IDSS=60mA
Drain Current, ID -- mA
100
80
80
60
60
=7
5m
40
40
ID
40 m
20
Ta =
75
SS
55
--2
A
°C
20
0 --6 --5 --4 --3 --2 --1 0 ITR01963 --6 --5 --4 --3 --2 --1
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
81001 TS IM TA-1526 No.7021-1/5
Parameter [FET] Drain-to-Source Voltage Gate-to-Drain Voltage Gate Current Drain Current Allowable Power Dissipation [TR] Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current(Pulse) Base Current Collector Dissipation [Common Ratings] Total Dissipation Junction Temperature Storage Temperature PT Tj Tstg 600 150 --55 to +150 mW °C °C VCBO VCEO VEBO IC ICP IB PC 55 50 6 150 300 30 200 V V V mA mA mA mW VDSX VGDS IG ID PD 40 -40 10 75 400 V V mA mA mW Symbol Conditions Ratings Unit
SS3P6中文资料
New ProductSS3P5 & SS3P6Vishay General Semiconductor Document Number: 88997For technical questions within your region, please contact one of the following: High-Current Density Surface Mount Schottky RectifierFEATURES•Very low profile - typical height of 1.0 mm•Ideal for automated placement•Low forward voltage drop, low powerlosses•High efficiency•Low thermal resistance•Meets MSL level 1, per J-STD-020, LF maximumpeak of 260 °C•Component in accordance to RoHS 2002/95/ECand WEEE 2002/96/ECTYPICAL APPLICATIONSFor use in low voltage high frequency inverters,freewheeling, dc-to-dc converters and polarityprotection applications.MECHANICAL DATACase: DO-220AA (SMP)Epoxy meets UL 94V-0 flammability ratingTerminals: Matte tin plated leads, solderable perJ-STD-002 and JESD22-B102E3 suffix for consumer grade, meets JESD 201 class1A whisker test, HE3 suffix for high reliability grade(AEC Q101 qualified), meets JESD 201 class 2whisker testPolarity:Color band denotes the cathode end PRIMARY CHARACTERISTICSI F(AV)3.0 AV RRM50 V, 60 VI FSM45 AE AS11.25 mJV F at I F = 3.0 A0.61 VT J max.150 °CDO-220AA (SMP)eSMP TM SeriesNotes:(1) Pulse test: 300 µs pulse width, 1 % duty cycle(2) Pulse test: Pulse width ≤ 40 msMAXIMUM RATINGS(T A = 25°C unless otherwise noted)PARAMETER SYMBOL SS3P5SS3P6UNITDevice marking code 3536Maximum repetive peak reverse voltage V RRM5060VMaximum average forward rectified current (Fig. 1)I F(AV) 3.0APeak forward surge current 10 ms single half sine-wavesuperimposed on rated loadI FSM45ANon-repetitive avalanche energyat I AS = 1.5 A, L = 10 mH, T J = 25 °CE AS11.25mJVoltage rate of change (rated V R)dV/dt10 000V/usOperating junction and storage temperature range T J, T STG- 55 to + 150°CELECTRICAL CHARACTERISTICS(T A = 25°C unless otherwise noted)PARAMETER TEST CONDITIONS SYMBOL TYP.MAX.UNITMaximum instantaneous forward voltage (1)I F = 3 AT J = 25 °CT J = 125 °CV F0.710.610.780.65V Maximum reverse current at rated V R (2)T J = 25 °CT J = 125 °CI R-2.010010µAmA T ypical junction capacitance 4.0 V, 1 MHz C J 80pF 元器件交易网New ProductSS3P5 & SS3P6Vishay General Semiconductor For technical questions within your region, please contact one of the following:Document Number: 88997Note:(1)Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 15 x 15 mm copper pad areas. R θJL is measuredat the terminal of cathode band. R θJC is measured at the top centre of the bodyNote:(1)Automotive grade AEC Q101 qualifiedRATINGS AND CHARACTERISTICS CURVES (T A = 25°C unless otherwise noted)THERMAL CHARACTERISTICS (T A = 25°C unless otherwise noted)PARAMETERSYMBOL SS3P5SS3P6UNIT Typical thermal resistance (1)R θJA R θJL R θJC1151520°C/WORDERING INFORMATION (Example)PREFERRED P/N UNIT WEIGHT (g)PREFERRED PACKAGE CODEBASE QUANTITYDELIVERY MODESS3P6-E3/84A 0.02484A 30007" diameter plastic tape and reel SS3P6-E3/85A 0.02485A 10 00013" diameter plastic tape and reel SS3P6HE3/84A (1)0.02484A 30007" diameter plastic tape and reel SS3P6HE3/85A (1)0.02485A10 00013" diameter plastic tape and reelFigure 1. Forward Current Derating Curve Figure 2. Forward Power Loss CharacteristicsFigure 3. Maximum Non-Repetitive Peak Forward Surge CurrentFigure 4. Typical Instantaneous Forward Characteristics元器件交易网New ProductSS3P5 & SS3P6Vishay General SemiconductorDocument Number: 88997For technical questions within your region, please contact one of the following: PACKAGE OUTLINE DIMENSIONS in inches (millimeters)Figure 5. Typical Reverse Leakage CharacteristicsFigure 6. Typical Junction CapacitanceFigure 7. Typical Transient Thermal impedance元器件交易网Disclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网Document Number: 。
SS39中文资料
SS32-S310SS32 - S310, Rev. B11999 Fairchild Semiconductor CorporationSS32 - S310, Rev. B11:1Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters]TRADEMARKSACEx™CoolFET™CROSSVOLT™E 2CMOS TM FACT™FACT Quiet Series™FAST ®FASTr™GTO™HiSeC™The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant intothe body, or (b) support or sustain life, or (c) whosefailure to perform when properly used in accordancewith instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a lifesupport device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status DefinitionAdvance InformationPreliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.This datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.Formative or In DesignFirst ProductionFull ProductionNot In ProductionDISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY , FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.SyncFET™TinyLogic™UHC™VCX™ISOPLANAR™MICROWIRE™POP™PowerTrench QFET™QS™Quiet Series™SuperSOT™-3SuperSOT™-6SuperSOT™-8Rev. D。
SSH7N90A中文资料
Min. − − − − −
Typ. − − −
620 9.3
Max. 7 28 1.4 − −
Units
Test Conditions
Integral reverse pn-diode A
in the MOSFET
V TJ=25°C, IS=7A, VGS=0V
ns TJ=25°C, IF=8A
µC diF/dt=100A/µs
REV. B
1
元器件交易网
SSH7N90A
N-CHANNEL POWER MOSFET
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise specified)
Symbol BVDSS ∆BV/∆TJ VGS(th)
ID , Drain Current [A]
Fig 2. Transfer Characteristics
101
100
150 oC
25 oC
- 55 oC
@ Notes : 1. VGS = 0 V 2. VDS = 50 V 3. 250 µs Pulse Test
10-1
2
4
6
8
10
VGS , Gate-Source Voltage [V]
元器件交易网
SSH7N90A
N-CHANNEL POWER MOSFET
BVDSS , (Normalized) Drain-Source Breakdown Voltage
ID , Drain Current [A]
Fig 7. Breakdown Voltage vs. Temperature
PBSS5350X中文资料
handbook, halfpage
PBSS5350X
QUICK REFERENCE DATA SYMBOL VCEO IC ICM RCEsat PINNING PIN 1 2 3 emitter collector base DESCRIPTION PARAMETER collector-emitter voltage collector current (DC) peak collector current equivalent on-resistance MAX. −50 −3 −5 135 UNIT V A A mΩ
ORDERING INFORMATION PACKAGE TYPE NUMBER NAME PBSS5350X − DESCRIPTION
PBSS5350X
VERSION SOT89
plastic surface mounted package; collector pad for good heat transfer; 6 leads
2003 Nov 21
3
元器件交易网
Philips Semiconductors
Product specification
50 V, 3 A PNP low VCEsat (BISS) transistor
PBSS5350X
handbook, halfpage
2
MLE186
2 3 1
MAM297
Fig.1 Simplified outline (SOT89) and symbol.
2003 Nov 21
2
元器件交易网
Philips Semiconductors
Product specification
SS 565(2010)(中文版)
SS 564：2010
（ICS13.020.10;33.020;35.020）
绿色数据中心-环境与能源管理系统
新加坡标准
前言
数据中心（DCs）是能源的消耗大户，通常其能源账单占经营费用的很大一部分。为了减少能源消耗和DCs的运行费用并且提高其竞争力，本标准被制定出来，以帮助机构建立必要的方针、系统和过程来提高DCs的能效并且减少其对环境的影响。
3）由数据中心根据其需求选择采用的，包括机械管理和电气系统、IT设备和数据中心设计在内的最优方案。
本标准的以下章节是在以下机构的许可下编写和复制的：
第五章和附录A- ISO/DIS 50001-Energy Management Systems- Requirementswith Guidancefor Use- InternationalOrganization For Standardization
它是由IT标准委员会下属的绿色IT技术委员会所指定的绿色数据中心标准工作组制定的。它是在工业和政府机构等主要利益相关者的参与下完成的。
本标准主要有三部分组成：
1）将本领域中具有已认证框架和达到能效和连续提高的，具有逻辑性和一致性的方法提供给DCs的可靠的管理系统；
2）关于DCs和追踪其性能与能效并且明确提高的潜在区域的推荐度量标准；
a)适用要求的定义；
b)定期进行能源审查；
c)制定和维护能源基线；
d)制定和维护绿色数据中心的目的，绿色数据中心的度量标准，及他们各自的目标；
e)制定和维护行动计划。
5.4.2适用的要求
机构应当：
a）确定适用的其能源使用管理（和其他使用的重要环境问题）的合法规定；
b）确定机构签署的任何其他适用的规定；
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
SS32-S310
SS32 - S310, Rev. B1
1999 Fairchild Semiconductor Corporation
SS32 - S310, Rev. B1
1:1
Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters]
TRADEMARKS
ACEx™CoolFET™
CROSSVOLT™E 2CMOS TM FACT™
FACT Quiet Series™FAST ®FASTr™GTO™HiSeC™
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition
Advance Information
Preliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.
Formative or In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY , FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
SyncFET™TinyLogic™UHC™VCX™
ISOPLANAR™MICROWIRE™POP™
PowerTrench QFET™QS™
Quiet Series™SuperSOT™-3SuperSOT™-6SuperSOT™-8
Rev. D。