3004XCulComms
UNISINSIGHT N3004-D1P 网络录像机 典型配置举例说明书
UNISINSIGHT N3004-D1P网络录像机典型配置举例资料版本：5W100-20191021Copyright © 2020 重庆紫光华山智安科技有限公司版权所有，保留一切权利。
非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式传播。
本文档中的信息可能变动，恕不另行通知。
UNISINSIGHT N3004-D1P网络录像机通道添加典型配置举例UNISINSIGHT N3004-D1P网络录像机资料版本：5W100-20191021Copyright © 2019 重庆紫光华山智安科技有限公司版权所有，保留一切权利。
非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式传播。
本文档中的信息可能变动，恕不另行通知。
目录1 简介 (1)2 配置前提 (1)2.1 注意事项 (1)2.2 设备上电 (1)3 直连通道添加配置举例 (1)3.1 快捷添加 (1)3.2 常规数字通道添加 (3)3.3 自定义添加 (6)4 WEB端通道添加配置举例 (8)4.1 搜索添加 (8)（1）步骤1选择“设置 > 摄像头 > 远程设备”点击设备搜索，如下图所示。
(8)（2）双击设备信息，或者选择设备信息前的选择框并单击“添加”，即将此设备加入“已添加设备”列表如下图所示 (9)4.2 手动添加 (10)（1）单击“手动添加”，显示手动添加界面，如下图所示。
(10)（2）单击“确定”，设备信息将显示在“已添加设备”列表中。
(11)5 注意事项 (11)6 相关资料 (11)1 简介本文档介绍NVR通道添加相关的典型配置举例。
2 配置前提本文档适用于UNISINSIGHT N3004-D1P产品，不严格与具体硬件版本对应，如果使用过程中与产品实际情况有差异，请参考相关产品手册，或以设备实际情况为准。
西门子Hicom 300 optiset E basic s User Guide
s Hicom 300 optiset E basic2Introduction (5)Standard Features (6)Internal and External Dialling (6)Dialling the Switchboard (6)Call T ransfer (7)Enquiry Call (8)T oggling between Calls (9)8 Way Conference (10)Call Pickup (11)T ransfer a Second Caller (12)Call Park (13)Call Back (14)External Line Reservation (16)Call Diversion Features (17)Fixed Call Forwarding (17)Variable Call Forwarding (18)PIN Features (19)Electronic T elephone Lock (19)Mobile Class of Service (20)Follow Me (21)3Optional Features (22)Individual Abbreviated Dialling (22)System Abbreviated Dialling (23)Stored Number Redial (24)Timed Reminder (25)Night Service (26)Key Settings (+/–) (27)Quick Reference (28)4This guide is designed to assist extension users on a Siemens Hicom 300 Communications System to use all authorised features.Your extension may not be authorised∗ to use all features. The Siemens representative can confirm features that are available to you.Your extension may also be subject to trunk barring thus restricting where you may dial.The optiset E basic digital telephone has 8 preprogrammed keys:-Programme MailboxTransfer Call ForwardRelease Call PickupPark ToggleAll other System features are accessed from this telephone by dialling codes and/or programme keys.The basic telephone is not equipped with a microphone but does have a loudspeaker for hands-free dialling.Please refer to the separate instruction manuals for the optiset E entry, standard, advance/advance plus and memory telephones.∗ - authorised features are those features that your company has designated for your use and may vary from extension to extension.5Handset operation-lift handset, listen for internal dial tone-dial code for switchboard (code is normally 9) Handsfree operation-do not lift handset-dial code for switchboard (code is normally 9)-lift handset when operator answers6You may transfer an internal or external call from your extension to any other extension or to the switchboard.Transfer to a Free Extension (Announcing the Call)-press Transfer key, listen for internal dial tone-dial the required extension or switchboard-when the extension or the switchboard answers, announcethe call and replace handset-if called party does not answer-press Release key to return to original callTransfer to a Free Extension (Call not Announced)-press Transfer key, listen for internal dial tone-dial the required extension or switchboard-when you hear ring tone, replace handsetThe call has now been transferred. If the ringing extension does not answer within a predetermined time the call will automatically be transferred back to your extension.Transfer to a Busy Extension-press Transfer key, listen for internal dial tone-dial the required extension number-when you hear busy tone, replace handsetThe call has now been transferred to the busy extension. If the busy extension terminates the call within a predetermined time and replaces the handset the transferred call will ring the extension. If the extension remains busy the call will automatically be transferred back to your extension.7This feature allows you to hold an existing call, dial another extension or even an external number, conduct a conversation without the original caller overhearing, and then return to the original caller.Activate Enquiry Call-press Transfer key, listen for internal dial tone-dial the required extension number or dial 0 and thenthe required external number-conduct your conversation-press Release key to return to the original callYou may use the Toggle key to switch between the original and 3rd party calls. In each case the other party is automatically placed on hold.You can only use the Toggle feature on an optiset E basic if you have a Toggle key.The Toggle code ∗ 27 will not function on an optiset E basic.8You have a call on the line and wish to make a second call and want to toggle between both calls.Activate Toggle-you are engaged on a call-press Transfer key, listen for internal dial tone-dial the required extension or external numberorYou have a call on the line and wish to answer a second call and want to toggle between both calls.-press Call Pickup keyYou may use the Toggle key to switch between the original and 3rd party calls. In each case the other party is automatically placed on hold.Disconnect either Party-toggle to the party you wish to disconnect-press Release key to disconnect either party-you will now be connected to the remaining callerYou can only use the Toggle feature on an optiset E basic if you have a Toggle key.The Toggle code ∗ 27 will not function on an optiset E basic.V The waiting party cannot hear your conversation.9This feature allows you to bring up to 7 parties into an existing conversation on your extension. The 7 parties could be external, internal or a mix of both.Activate Conference-you are engaged on a call-press Transfer key, listen for internal dial tone-dial the required extension or 0 and the external number-dial ∗ 31-conference tone is heard and 3 parties are connected.Repeat the procedure to add more parties to the conference.Consult with an internal or external party when busy with a conference-press Transfer key, listen for internal dial tone-dial the required extension or 0 and the external number-consult with party-press Release key-you are now reconnected to the conference.10The call pick up feature allows you to answer any ringing extension in your pickup group from your telephone.Activate Call PickupAn extension within your pickup group is ringing-Call Pickup LED flashes- a ping ring will also alert you to an incoming call-lift handset, listen for internal dial tone-press Call Pickup key-you have now answered the callAnswer 2nd CallIf you are busy on a call when the Call Pickup LED flashes and you wish to answer the waiting call.-ask existing caller to hold-press Call Pickup key-1st call is placed on hold-2nd call is now on lineTransfer 2nd Call-press Transfer key, listen for internal dial tone-dial required extension number-replace handset-1st call will ring you backReturn to CallIf you receive no reply or busy tone you can return to the second caller.-press Release key-2nd call is now on line-1st call is still on holdYou can either toggle between the two remaining calls or disconnect the second call and return to the first call.-press Release key-1st call is now on the lineCalls may be parked on your optiset E basic for retrieval from your telephone, or any other digital telephone in your Call Pickup group which is equipped with a Park key.V Only 1 call per pickup group may be parked at a time.Park a Call-press Park key-Park LED flashes-replace handset-Park LED remains flashingRetrieve a Parked Call-Park LED is flashing-lift handset, listen for internal dial tone-press Park key-Park LED is off-call is now on the lineCall Back requests can be left on extensions which have been rung and not answered or are busy.Activate Call Back - Busy-called extension is busy-dial ∗ 22-confirmation tone is heard-replace handsetThe system will automatically call you back when both your extension and the called extension are free.-lift handset-ring tone is heard as the required extension is rungShould you fail to answer a Call Back that you have activated, the system will automatically cancel the feature after ringing your extension for a predetermined time.Activate Call Back - No answer-called extension does not answer-dial ∗ 22-confirmation tone is heard-replace handsetWhen the called party returns to the office and has used the telephone the system will ring your telephone.-lift handset-ring tone is heard as the required extension is rungCancel Call Back (Before Ring Back)-lift handset-dial # 22-confirmation tone is heard-replace handsetShould you dial 0 for a line and receive busy tone, i.e. all lines are busy, you may reserve the first line to become free for your use.Activate External Line ReservationYou have dialled 0 for an external line and receive a busy tone, do not replace your handset.-dial ∗ 22-listen for confirmation tone-replace handsetWhen an external line becomes free your extension will ring.-lift handset-internal dial tone is heard-Dial 0 for the line and required external number.Deactivate Fixed Call Forwarding-press Call Forward key or dial # 10-Call Forward LED goes off (if equipped)When Fixed Call Forward destination has been programmed but deactivated it will serve as Call Forward No Answer i.e. If your extension rings for longer than a predetermined time it will automatically divert to the Fixed destination.Reactivate Fixed Call Forwarding-press Call Forward key or dial ∗ 10-Call Forward LED is on (if equipped)Calls will now go to the Fixed Call Forward destination immediately.This is a temporary Call Forwarding feature which allows you to divert all your calls to a destination of your choice and will override your Fixed Call Forwarding destination.Programme Variable Call Forwarding-press Programme key-press Call Forward key once only or dial ∗ 10-dial required extension number or 0 and external number-press Programme key-Call Forward LED is on (if equipped)When you lift your handset, special dial tone will also be heard to remind you that the feature is activated.Cancel Variable Call Forwarding-Call Forward LED is on-press Call Forward key or dial # 10-Call Forward LED goes off (if equipped)Calls will now ring as normal on your extension.Your Fixed Call Forwarding destination will now be restored.Unlock your Extension-dial # 21 and your PINV You will still be able to receive calls when your extension is locked.This feature allows you to activate your own Class of Service (barring level) on any extension.Activate Mobile Class of Service-dial ∗ 25 and your PINCalls will now register against your name on the Telephone Management System.Cancel Mobile Class of Service-dial # 25V Should you forget to cancel your PIN at the remote extension, contact the extension and ask them to dial # 25. The PIN will however be automatically cancelled if the extension is not used for a predetermined time.This feature allows you to activate call forwarding at a remote extension to enable calls to follow you from extension to extension.Activate Follow MeWhen you arrive at the remote extension where you wish to receive calls made to your extension.-lift handset, listen for internal dial tone-dial ∗ 25 and your PIN-dial ∗ 10-replace handsetIncoming calls to your extension will divert to this extension. When you activate this feature it transfers various facilities to this extension e.g. Barring Restrictions, Stored No. Redial etc.Cancel Follow MeAt the remote extension-lift handset, listen for internal dial tone-first dial # 10 (this cancels your Call Forwarding)-dial # 25 (this cancels your PIN)-listen for confirmation tone- replace handsetV Should you forget to cancel your PIN and Call Forward at the remote extension, contact the extension and ask them to dial # 25.The PIN will however be automatically cancelled if the extension is not used for a predetermined time.The Call Forward can be cancelled from your own extension.-press Programme keyDial numbers-dial # 81- enter digit (0-9) under which required number is stored-wait whilst system dials the numberWhen you enter a number in a location that already has a stored number this will be deleted and the new number accepted.The system allows for the storage of 16000 external telephone numbers divided into 16 groups, each containing 1000 numbers. You can have access to any 2 groups i.e. 2000 numbers. By utilising the system abbreviated dialling you will be permitted to dial specific numbers that would be outside your normal trunk barring limits.Use the System Abbreviated Dialling-select the relevant access code from your Abbreviated DiallingDirectory-dial the relevant code xxxxx-wait whilst system dials the numberThe system will now dial the required external number, the time taken will vary according to the type of main exchange to which your Hicom 300 is connected.This feature allows you to store any number for later re-dialling. The number may be stored for as long as required.Store a NumberYou have dialled a number and have not been answered or the number is busy, do not disconnect.-dial ∗19-listen for confirmation tone-replace the handsetRedial the Number-lift the handset, listen for internal dial tone-dial ∗19-the number is now automatically dialled by the systemThe number will remain stored until another number is stored, thus erasing the previous number.This feature allows an extension to store one timed reminder. The system will then call the extension at the required time.Programme Timed Reminder-press Programme key-dial ∗ 23-dial required time e.g.0945 for 9:45 am1430 for 2:30 pmReminder Callback-telephone rings with special callback ringing-lift handset-replace handsetIf not answered your telephone will ring for 40 seconds and then 5 minutes later will ring again for 40 seconds.Timed Reminder is now cancelled.Cancel the Reminder before Ringback-lift handset-dial # 23-listen for confirmation tone-replace handsetWhen the night bell rings-lift handset-dial ∗ 88-you are now connected to the callerCheck with System Administrator if any other type of Night Service is operational.The Plus and Minus keys allow for the individual setting of the levels of speech, ringing and ring tones.Change Speech Volume-whilst busy on a call-press + or – keys to adjust Speech volume-press + and – keys simultaneously to store settingChange Ringing volume or Ring Tone frequency-Do not lift handset-press + and – keys simultaneously-press1and then + or – keys to adjust Ringing volume-or2and then + or – keys to adjust Ring Tone frequency-press + and – keys simultaneously to store settingSiemens Telecommunications (Pty) Ltd.Private Bag X71Halfway House 1685e n i L e d i s t u O 0el b a i r a V d r a w r o F l l a C g o r P *go r P .o n &01r o t a r e p O 9l e c n a c -01#p u k c i P l l a C *33de x i F d r a w r o F l l a C g o r P *go r P .o n &11e c n e r e f n o C y a W 8*13e t a v i t c a e d -01#k c a B g n i R *22et a v i t c a -*01r e d n i m e R d e m i T g o r P *32go r P -g n i l l a i D l a u d i v i d n I *)9-0(18l a i d -e R .o N d e r o t S *91la i d -)9-0(18#n o i s n e t x E k c o l n U N I P 12#ec i v r e S f o s s a l C e l i b o M *NI P 52n o i s n e t x E k c o L *NI P 12l e c n a c -52#ec i v r e S t h g i N *88eM w o l l o F *N I P 52*01le c n a c -52#01#。
Sennheiser ew 系列无线麦克风系统用户手册说明书
The ew 322 G3 consists of the same components as ew 312 G3but with a compact cardioid clip-on microphone.The ew 352 G3 consists of the same components as ew 312 G3but with a headworn cardioid microphone.FEATURESSturdy metal housing(transmitter and receiver)42 MHz bandwidth: 1,680 tunable UHF frequencies for interference-free reception20 frequency banks with up to 24 compatible frequenciesEthernet port for connecting to theWireless Systems Manager (WSM) software for control via computer High-quality true diversity receptionPilot tone squelch for eliminating RF inter- ference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency rangeIncreased range for audio sensitivity Wireless synchronization of transmitter parameter from receiverUser-friendly menu operation with more control optionsIlluminated graphic display, receiver also shows transmitter settingsAuto-Lock function avoids accidental changing of settingsHDX compander for crystal-clear sound Transmitter feature battery indicatation in 4 steps, also shown on receiver display Programmable Mute function Integrated Equalizer and Soundcheck modeContacts for recharging BA 2015 accupack directly in the transmitter Wide range of accessories adapts the system to any requirementThe ew 312 G3 is a wireless microphone set, consisting of a True Diversityreceiver, a bodyworn transmitter, a compact omni directional clip-on micropho-ne plus accessories.The bodypack transmitter features charging contacts for the optional recharge-able battery. Sync up the bodypack to the receiver wirelessly with the new wireless sync. Backlit graphic displays make them easy to read under all lighting conditions.ew 300 Setsew 312 G3 Presentation Set ew 322 G3 Presentation Set ew 352 G3 Head Setew 335/345/365 G3 Vocal SetsFEATURESew 335 G3/ew 345 G3/ew 365 G3 Vocal SetsSee above mentioned list of features plus Programmable Mute switch, easyaccessableHandheld transmitter with easy-exchangeable microphone heads from evolution series The ew 335 G3 is a wireless microphone set, consisting of a True Diversity receiver, a handheld transmitter with e 835 microphone head plus accessories. It is versatile for every style of music and presentations. A wireless link from receiver to the transmitter allows synchronization of frequencies for easy setup. Backlit graphic displays make them easy to read under all lighting conditions. The ew 345 G3 consists of the same components as ew 335 G3but with an e 845 microphone head.The ew 365 G3consists of the same components as ew 335 G3but with an e 865 microphone head.ARCHITECT’S SPECIFICATIONSew 312 G3 Presentation SetComplete plug & play wireless microphone set with clip-on microphone (condenser, omni-directional) from Sennheiser evolution series for multi-purpose application. The devices shall have metal housings for rugged use. 42 MHz bandwidth with 1,680 tunable frequencies. 20 banks with up to 24 compatible frequencies, 1 bank for individual selectable frequencies, scan function and wireless synchronization to the transmitter for easy setup. HDX compander delivers high-quality sound performance. All parameters of transmitter and receiver can be monitored and controlled via Wireless Systems Manager (WSM) software from PC. The transmitter shall have a sensitivity range of 48 dB. The receiver offers a maximum output level of +18 dBu (+6 dB gain). True Diversity and pilot tone squelch for interference-free reception. Charging contacts on transmitter for recharging BA 2015 accupack directly in the transmitter shall be available. 3-step battery + LowBattery indication on transmitter and receiver shall give reliable information on operation time.Menu operation, auto-lock function and illuminated graphic displays on transmitter and receiver for user-friendly operation.A RF Mute function on transmitter and receiver allows offline settings.An easy accessable Mute switch on the transmitter can be programmed for AF on/off, RF on/off.A suitable Remote Mute Switch option also allows push-to-talk and push-to-muteAn equalizer and soundcheck mode is inte g rated in the receiver.ew 322 G3 Presentation SetComplete plug & play wireless microphone set with clip-on microphone (electret, cardioid) from Sennheiser evolution series for multi-purpose application. Further discription see paragraph ew 312 G3.ew 352 G3 Head SetComplete plug & play wireless microphone set with headworn microphone (condenser, cardioid) for hands-free application. Further discription see paragraph ew 312 G3.ew 335 G3 Vocal SetComplete plug & play wireless microphone set with easy-exchangeable e 835 microphone head (dynamic, cardioid) from Sennheiser evolution series for multi-purpose application. Further discription see paragraph ew 312 G3.ew 345 G3 Vocal SetComplete plug & play wireless microphone set with easy-exchangeable e 845 microphone head (dynamic, supercardioid) from Sennheiser evolution series for multi-pur p ose application. Further discription see paragraph ew 312 G3.ew 365 G3 Vocal SetComplete plug & play wireless microphone set with easy-exchangeable e 865 microphone head (electret-condenser, supercardioid) from Sennheiser evolution series for multi-purpose application. Further discription see paragraph ew 312 G3.SySTEMRF frequency range ................................................516.....865 MHzTransmission/receiving frequencies ...................1,680Frequency banks ..................................................... 20 (factory presets)6 (user presets)Presets .......................................................................24 max.Switching bandwidth .............................................42 MHzCompander ...............................................................HDXSignal-to-noise ratio ..............................................> 115 dB(A)THD, total harmonic distortion ............................< 0.9 %RECEIvERAF Frequency response..........................................25…18,000 HzAntenna connectors ...............................................BNC, 50 OhmAudio outputs .......................................................... X LR: +18 dBu max6.3 mm jack: +10 dBu maxDimensions ...............................................................212 x 202 x 43 mmWeight .......................................................................980 gTRANSMITTERRF output power .....................................................10/30 mW switchableOperating time ........................................................typ. 8hInput voltage range ................................................1.8 v lineInput voltage range ................................................2.4 v lineDimensions ...............................................................82 x 64 x 24 mmWeight .......................................................................~ 160 gMICROPHONETransducer; Microphone type ...............................permanent polarizedAF sensitivity ...........................................................1.6 mv/PaFrequency response ...............................................80.....18,000 HzPick-up pattern ........................................................omni-directionalContinued on page 5EM 300Modulation ...............................................................wideband FMRF frequency range ................................................ 516 – 558, 566 – 608, 626 – 668, 734 –776, 780 – 822, 823 – 865 MHz Transmission/receiving frequencies ...................1,680, tuneable in steps of 25 kHzReceiving frequencies ............................................ 1,680 frequencies, tuneable in steps of 25 kHz20 frequency banks, each with up to 24 factory-preset channels,intermodulation-free20 frequency banks with up to 24 user programmable channelsSwitching bandwidth .............................................42 MHzNominal/peak deviation .......................................±24 kHz/±48 kHzReceiver principle ....................................................true diversitySensitivity (with HDX, peak deviation) .............< 2 μv for 52 dBA rms S/NAdjacent channel rejection ...................................typ. ≥ 75 dBIntermodulation attenuation ...............................typ. ≥ 70 dBBlocking .....................................................................≥ 75 dBSquelch ...................................................................... O ff, 5 to 25 dBμv, adjustable in steps of 2 dBPilot tone squelch ...................................................can be switched offAntenna inputs .......................................................2 BNC socketsCompander system .................................................Sennheiser HDXEQ presets (switchable, affect the line and monitor outputs):Preset 1: “Flat”Preset 2: “Low Cut” ................................................–3 dB at 180 HzPreset 3: “Low Cut/High boost” .......................... –3 dB at 180 Hz+6 dB at 10 kHzPreset 4: “High Boost” ...........................................+6 dB at 10 kHzS/N ratio (1 mv, peak deviation) ........................≥ 115 dBATHD .............................................................................≤ 0.9 %AF output voltage (at peak deviation,1 kHz AF) .................................................................. ¼” (6.3 mm) jack socket (unbalanced): +12 dBuXLR socket (balanced): +18 dBuAdjustment range of audio output level ........... 48 dB, adjustable in steps of 3 dB +6 dB gain reserveTemperature range .................................................–10 °C to +55 °CPower supply............................................................12 vPower consumption:...............................................350 mADimensions ...............................................................approx. 202 x 212 x 43 mmWeight (incl. batteries) .........................................approx. 980 gIn compliance with .................................................. C E, FCC, ETS 300422, ETS 300445MAINS UNITInput voltage............................................................100 to 240 v~, 50/60 HzPower/current consumption ................................max. 120 mAOutput voltage ........................................................12 vSecondary output current .....................................400 mATemperature range .................................................–10 °C to +40 °CIn compliance with .................................................. C E, FCC, IC, ETS 300422, ETS 300445Continued on page 6SK 300 and SKM 300Modulation ...............................................................wideband FMRF frequency range ................................................ 516 – 558, 566 – 608, 626 – 668, 734 –776, 780 – 822, 823 – 865 MHz Transmission/receiving frequencies ...................1,680, tuneable in steps of 25 kHzReceiving frequencies ............................................ 1,680 frequencies, tuneable in steps of 25 kHz20 frequency banks, each with up to 24 factory-preset channels, intermodulation-free6 frequency banks with up to 24 user programmable channelsSwitching bandwidth .............................................42 MHzNominal/peak deviation .......................................±24 kHz/±48 kHzFrequency stability .................................................≤ ±15 ppmRF output power at 50 O......................................typ. 10/30 mW, switchablePilot tone squelch ...................................................can be switched offAF characteristicsCompander system .................................................Sennheiser HDXAF frequency responseSK ................................................................................ m icrophone: 80 –18,000 Hzline: 25 –18,000 HzSKM ............................................................................80 –18,000 HzS/N ratio (1 mv, peak deviation) ........................≥ 115 dBATHD .............................................................................≤ 0.9 %Max. input voltage (SK) microphone/line ........3 vrmsInput impedance (SK) microphone/line ...........40 k O, unbalanced/1 M OInput capacitance (SK) ..........................................switchableAdjustment range of input sensitivity .............. S K: 60 dB, adjustable in steps of 3 dBSKM: 48 dB, adjustable in steps of 6 dBIn compliance with .................................................. C E, FCC, IC, ETS 300422, ETS 300445OvERALL DEvICETemperature range .................................................−10 °C to + 55 °CPower supply ........................................................... 2 AA size batteries, 1.5 v orBA 2015 accupackNominal voltage .....................................................2.4 vCurrent consumption: at nominal voltage ........typ. 180 mA (30 mW)with switched-off transmitter .............................≤ 25 μAOperating time .......................................................typ. 8 hrsDimensions ............................................................... S K: approx. 82 x 64 x 24 mmSKM: approx. Ø 50 x 265 mmWeight (incl. batteries) ......................................... S K: approx. 160 gSKM: approx. 450 gIn compliance with .................................................. C E, FCC, IC, ETS 300422, ETS 300445Continued on page 7Microphones (SK 300)ME 2ME 3-ew ME 4Microphone type .............................condenser condenser condenserSensitivity .........................................20 mv/Pa 1.6 mv/Pa40 mv/PaPick-up pattern ................................omni-directional cardioid cardioidMax. SPL ............................................130 dB SPL150 dB SPL120 dB SPL Microphone heads (SKM 300)MMD 835-1MMD 845-1MMK 865-1Radio microphone type .................dynamic dynamic condenserSensitivity ......................................... 2.1 mv/Pa 1.6 mv/Pa 1.6 mv/PaPick-up pattern ................................cardioid super-cardioid cardioid/super-cardioid,switchableMax. SPL ............................................154 dB SPL154 dB SPL152 dB SPL Frequency response .......................80.....18,000 Hz80.....18,000 Hz80.....18,000 HzDELIVERY INCLUDES for ew 312 / ew 322 / ew 352 G31 EM 300 G3 rack-mount receiver1 SK 300 G3 bodypack transmitter1 ME2 clip-on microphone (omni-directional) or1 ME 4 clip-on microphone (cardioid) or1 ME 3-ew headset microphone (cardioid)1 GA 3 rack mount1 NT2 power supply unit2 Antennas2 AA batteries1 Instruction manualDELIVERY INCLUDES for ew 335 / ew 345 / ew 365 G31 S KM 300-835 handheld transmitterwith cardioid dynamic head or1 S KM 300-845 handheld transmitterwith super-cardioid dynamic head or1 S KM 300-865 handheld transmitterwith super-cardioid condenser head1 EM 300 G3 rack receiver1 MZQ 1 microphone clip1 NT2 power supply unit2 Antennas1 GA 3 Rack mount kit2 AA batteries1 Instruction ManualPOLAR PATTERN0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 HzMMD 835-1MME 865-1MMD 845-10510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 Hz0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 HzME 3-ewME 4-ew0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 Hz0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 HzPRODUCT VARIANTSew 312 G3 Presentation Set Cat. No. ew 312 G3-A-EU 516 – 558 MHz 503112 ew 312 G3-A-US 516 – 558 MHz 503330 ew 312 G3-G-EU 566 – 608 MHz 503331 ew 312 G3-G-US 566 – 608 MHz 503332 ew 312 G3-B-EU 526 – 668 MHz 503333 ew 312 G3-B-US 526 – 668 MHz 503334 ew 312 G3-C-EU 734 –776 MHz 503335 ew 312 G3-C-US 734 –776 MHz 503336 ew 312 G3-D-EU 780 – 822 MHz 503337 ew 312 G3-D-EU-X 780 – 822 MHz 503338 ew 312 G3-D-UK 780 – 822 MHz 503339 ew 312 G3-E-EU 823 – 865 MHz 503340 ew 312 G3-E-EU-X 823 – 865 MHz 503341 ew 312 G3-E-UK 823 – 865 MHz 503342 ew 312 G3-GB 606 – 648 MHz 504649 ew 322 G3 Presentation Set Cat. No. ew 322 G3-E-UK 823 – 865 MHz 503357 ew 322 G3-A-EU 516 – 558 MHz 503113 ew 322 G3-A-US 516 – 558 MHz 503345 ew 322 G3-G-EU 566 – 608 MHz 503346 ew 322 G3-G-US 566 – 608 MHz 503347 ew 322 G3-B-EU 626 – 668 MHz 503348 ew 322 G3-B-US 626 – 668 MHz 503349 ew 322 G3-C-EU 734 –776 MHz 503350 ew 322 G3-C-US 734 –776 MHz 503351 ew 322 G3-D-EU 780 – 822 MHz 503352 ew 322 G3-D-EU-X 780 – 822 MHz 503353 ew 322 G3-D-UK 780 – 822 MHz 503354 ew 322 G3-E-EU 823 – 865 MHz 503355 ew 322 G3-E-EU-X 823 – 865 MHz 503356 ew 322 G3-GB 606 – 648 MHz 504650 ew 352 G3 Presentation Set Cat. No. ew 352 G3-A-EU 516 – 558 MHz 503114 ew 352 G3-A-US 516 – 558 MHz 503360 ew 352 G3-G-EU 566 – 608 MHz 503361 ew 352 G3-G-US 566 – 608 MHz 503362 ew 352 G3-B-EU 526 – 668 MHz 503363 ew 352 G3-B-US 526 – 668 MHz 503364 ew 352 G3-C-EU 734 –776 MHz 503365 ew 352 G3-C-US 734 –776 MHz 503366 ew 352 G3-D-EU 780 – 822 MHz 503367 ew 352 G3-D-EU-X 780 – 822 MHz 503368 ew 352 G3-D-UK 780 – 822 MHz 503369 ew 352 G3-E-EU 823 – 865 MHz 503370 ew 352 G3-E-EU-X 823 – 865 MHz 503371 ew 352 G3-E-UK 823 – 865 MHz 503372 ew 352 G3-GB 606 – 648 MHz 504651ew 335 G3 Vocal Set Cat. No. ew 335 G3-A-EU 516 – 558 MHz 503115 ew 335 G3-A-US 516 – 558 MHz 503375 ew 335 G3-G-EU 566 – 608 MHz 503376 ew 335 G3-G-US 566 – 608 MHz 503377 ew 335 G3-B-EU 526 – 668 MHz 503378 ew 335 G3-B-US 526 – 668 MHz 503379 ew 335 G3-C-EU 734 –776 MHz 503380 ew 335 G3-C-US 734 –776 MHz 503381 ew 335 G3-D-EU 780 – 822 MHz 503382 ew 335 G3-D-EU-X780 – 822 MHz 503383 ew 335 G3-D-UK 780 – 822 MHz 503384 ew 335 G3-E-EU 823 – 865 MHz 503385 ew 335 G3-E-EU-X823 – 865 MHz 503386 ew 335 G3-E-UK 823 – 865 MHz 503387 ew 335 G3-GB 606 – 648 MHz 504652 ew 345 G3 Vocal Set Cat. No. ew 345 G3-A-EU 516 – 558 MHz 503116 ew 345 G3-A-US 516 – 558 MHz 503390 ew 345 G3-G-EU 566 – 608 MHz 503391 ew 345 G3-G-US 566 – 608 MHz 503392 ew 345 G3-B-EU 526 – 668 MHz 503393 ew 345 G3-B-US 526 – 668 MHz 503394 ew 345 G3-C-EU 734 –776 MHz 503395 ew 345 G3-C-US 734 –776 MHz 503396 ew 345 G3-D-EU 780 – 822 MHz 503397 ew 345 G3-D-EU-X780 – 822 MHz 503398 ew 345 G3-D-UK 780 – 822 MHz 503399 ew 345 G3-E-EU 823 – 865 MHz 503400 ew 345 G3-E-EU-X823 – 865 MHz 503401 ew 345 G3-E-UK 823 – 865 MHz 503402 ew 345 G3-GB 606 – 648 MHz 504653 ew 365 G3 Vocal Set Cat. No. ew 365 G3-A-EU 516 – 558 MHz 503117 ew 365 G3-A-US 516 – 558 MHz 503405 ew 365 G3-G-EU 566 – 608 MHz 503406 ew 365 G3-G-US 566 – 608 MHz 503407 ew 365 G3-B-EU 526 – 668 MHz 503408 ew 365 G3-B-US 526 – 668 MHz 503409 ew 365 G3-C-EU 734 –776 MHz 503410 ew 365 G3-C-US 734 –776 MHz 503411 ew 365 G3-D-EU 780 – 822 MHz 503412 ew 365 G3-D-EU-X780 – 822 MHz 503413 ew 365 G3-D-UK 780 – 822 MHz 503414 ew 365 G3-E-EU 823 – 865 MHz 503415 ew 365 G3-E-EU-X823 – 865 MHz 503416 ew 365 G3-E-UK 823 – 865 MHz 503417 ew 365 G3-GB 606 – 648 MHz 504654RECOMMENDED ACCESSORIESCat. No. ME 4-ew – Clip-on microphone,cardioid, black 503156 AM 2 – Antenna Mount kit 009912 CC 3 – System Case 503168L 2015 – Charging unit 009928 BA 2015 – Rechargeable battery pack 009950 ASA 1 – Active antenna splitter 503165 NT 1-1 – plug-in mains unit forASA 1 & L 2015 E U: 503158US: 503873UK: 503874 NT 3-1 – Plug-in mains unit for L 2015 E U: 503159US: 503876UK: 503877 A 1031-U – Antenna 004645A 2003-UHF – Directional Antenna 003658 AB 3 – Antenna booster 505550 Ear Set 1-ew – Ear-worn microphone,omni, black 504232 Ear Set 1-ew-3 – Ear-worn microphone,omni, beige 504237 Ear Set 4-ew – Ear-worn microphone,cardioid, black 504236 Ear Set 4-ew-3 – Ear-worn microphone,cardioid, beige 504234 MKE 1-ew – Clip-on microphone,omni-directional, black 502876 MKE 1-ew-1 – Clip-on microphone,omni, white 502877 MKE 1-ew-2 – Clip-on microphone,omni, brown 502878 MKE 1-ew-3 – Clip-on microphone, beige 502879 MKE 2-ew Gold – Clip-on microphone,omni, black 009831 MKE 2-ew-3 Gold – Clip-on microphone,omni, beige 009832 MKE 40-ew – Clip-on microphone,cardioid, black 500527Cat. No. HSP 4-ew – Headworn microphone,cardioid, black 009864 HSP 4-ew-3 – Headworn microphone,cardioid, beige 009867 HSP 2-ew – Headworn microphone,omni, black 009866 HSP 2-ew-3 – Headworn microphone,omni, beige 009872 CI 1 – Instrument cable 503163ew 335 / ew 345 / ew 365 G3 Vocal SetsMMD 835-1 – evolution microphone head 502575 MMD 845-1 – evolution microphone head 502576 MME 865-1 – evolution microphone head 502581 MZW 1 – Windshield 004839 KEN 2 – Identification rings 530195 LA 2 – Charging adapter forhandheld microphones 503162 CC 3 – System case 503168Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany 0 4 / 1 3 S e n n h e i s e r i s a r e g i s t e r e d t r a d e m a r k o f S e n n h e i s e r e l e c t r o n i c G m b H & C o . K G . w w w . s e n n h e i s e r . c o m . C o p y r i g h t ©0 4 / 2 0 1 3 . A l l r i g h t s r e s e r v e d . E r r o r s a n d o m i s s i o n s e x c e p t e d .Contact your local Service Partner:。
BOSCH Forum 6 系列 60 x 60 cm 烤箱说明书
Serie 6, Forno con vapore daincasso, 60 x 60 cm, AcciaioHRG5785S6Accessori integrati1 x Teglia da forno smaltata, 1 x Griglia combinata, 1 x Leccarda universale smaltataAccessori opzionaliHEZ317000 Teglia per pizza, HEZ327000 Pietra per pane e pizza, HEZ531000 Leccarda bassa 455x375x30 mm (LxPxA), HEZ531010 Leccarda antiaderen 455x375x30mm (LxPxA), HEZ532000 Leccarda profonda 455x375x38 mm (LxPxA), HEZ532010 Leccarda antiaderen 455x400x38mm (LxPxA), HEZ538000 Guide telescopiche clip a 1 livello, HEZ629070 Teglia per grigliare adatta a pirolisi, HEZ634000 Griglia combinata 455x375x31 mm (LxPxA), HEZ638000 Guide telescopiche clip a 1 livello, HEZ660050 Accessory, HEZ664000 Griglia combinata 455x375x59 mm (LxPxA), HEZ915003 Pirofila in vetro con coperchio 5,4 l., HEZG0AS00 Cavo di collegamento 3m • 30 programmi automatici di cottura: cucinare sarà semplicissimo grazie ai programmi con impostazioni già preselezionate.• Controllo digitale LCD bianco: semplice da utilizzare grazieall'accesso diretto alle funzioni addizionali, suggerimenti di temperatura ed indicazioni di temperatura.• Autopulizia pirolitica: pulizia del forno senza sforzo• Porta piatta con sistema SoftMove: SoftOpen e SoftClose, apertura e chiusura ammortizzate• Termosonda PerfectRoast: rileva la temperatura interna della pietanza con una precisione al grado e al secondo.Dati tecniciTipologia costruttiva del prodotto: .....................................Da incasso Sistema di pulizia: ....................................................................Pirolisi Dimensioni del vano per l'installazione (AxLxP): 585-595 x 560-568 x 550 mmDimensioni (AxLxP): ............................................595 x 594 x 548 mm Dimensioni del prodotto imballato (AxLxP): .......670 x 690 x 660 mm Materiale del cruscotto: ...................................................acciaio inox Materiale porta: ..........................................................................vetro Peso netto: ..............................................................................40.0 kg Volume utile: .................................................................................71 l Metodo di cottura: ...........rigenerazione cibi, Scongelamento, Grill a superficie grande, Aria calda delicata, aria calda, Riscaldamento statico, Funzione pizza, Cottura a bassa temperatura, grill ventilato Materiale della cavità: .................................................................Altro Regolazione della temperatura: .........................................elettronica Numero di luci interne: (1)Lunghezza del cavo di alimentazione elettrica: .....................120.0 cm Codice EAN: (4242005165926)Numero di vani - (2010/30/CE): (1)Classe di efficienza energetica: .........................................................A Energy consumption per cycle conventional (2010/30/EC): ........0.99 kWh/cycleEnergy consumption per cycle forced air convection (2010/30/EC):0.81 kWh/cycleIndice di efficienza energetica (2010/30/CE): ..........................95.3 % Potenza: ..................................................................................3600 W Corrente: .....................................................................................16 A Tensione: .............................................................................220-240 V Frequenza: ...........................................................................50; 60 Hz Tipo di spina: ..........................................................................Schuko Accessori inclusi: 1 x Teglia da forno smaltata, 1 x Griglia combinata, 1 x Leccarda universale smaltataSerie 6, Forno con vapore daincasso, 60 x 60 cm, AcciaioHRG5785S6Caratteristiche principali- Forno con 9 funzioni di cottura: MultiCottura HotAir 3D, Riscaldamento superiore e inferiore, Grill ventilato, Grill a superficie grande, Funzione pizza, Cottura a bassa temperatura, Scongelamento, Aria calda delicata, rigenerazione cibi- Funzioni combinabili con gli impulsi di vapore: aria calda 3D, grill ventilato, riscaldamento statico (resistenza inferiore e superiore)- Display digitale LCD bianco- Volume cavità: 71 l- Regolazione della temperatura da 30 °C a 275 °C- Autopulizia pirolitica- Programmi automatici: 30Altre caratteristiche- Temperatura porta max. 30 °C- Riscaldamento rapido- Illuminazione interna alogena, Illuminazione disinseribile- Orologio elettronico con impostazione inizio e fine cottura- Porta a ribalta, Porta con chiusura ammortizzata SoftClose, SoftMove: grazie ad un meccanismo di ammortizzazione intelligente, la porta si apre e si chiude delicatamente e silenziosamente- Termosonda PerfectRoast- HomeConnect readyAccessori- Accessori: 1 leccarda smaltata bassa, 1 griglia combinata, 1 leccarda universale profonda smaltataEtichetta energetica- Assorbimento massimo elettrico: 3.6 kW- Classe di efficienza energetica (acc. EU Nr. 65/2014): A(in una scala di classi di efficienza energetica da A+++ a D)- Consumo energetico per ciclo durante funzionamento convenzionale:0.99 kWh- Consumo energetico per ciclo durante funzionamento ventilato:0.81 kWh- Numero di cavità: 1 Tipo di alimentazione: elettrica Volume della cavità:71 lSerie 6, Forno con vapore da incasso, 60 x 60 cm, Acciaio HRG5785S6。
Quill Stop for Sieg X3 (Grizzly G0463) 和 SX3 (Griz
Quill Stop V2 Installation Guide 11/16/2014Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to ******************.What’s Included1. Quill Stop Plate2. Stop Block3. 1/2‐20 Button Nut4. 1/2‐20 x 9” Threaded Rod5. 1/4‐20 x 1” Socket Head Cap Screw (1)6. 1/4‐20 x 5/8” Socket Head Cap Screw (2)7. 8‐32 X 1” Socket Head Cap Screw (1)8. 1/4‐20 x 1/2” Socket Set Screw (1)9. Plastic Spacer10. Installation instructionsInstallation1. Remove power to the mill.2. Remove tooling from the spindle.3. Lower the mill head to its lowest point while still being able to lower the quill to its lowest point.4. This step for SX3 mills only. Remove the Display Bracket and Block and Stud (Grizzly parts G0619008& G0619009) from the Spindle Sleeve (G0619010) and Digital Spindle Depth Unit (G0619029).5. Test the fit of the Quill Stop Plate to the spindle and spindle collar. If the Plate does not easily slideup onto the spindle collar, then continue with this step. Otherwise, skip to the next step.Due to minor variations in the diameter of the spindle collar, it may be necessary to expand the Plate slit slightly to slide the Plate up over the spindle and onto the spindle collar. If this is required, install the supplied #8‐32 socket head cap screw (SHCS) on the top side of the 1/4‐20 hole along the slit and tighten the #8‐32 SHCS to expand the slit slightly in the Plate to allow the Plate to slide up over the spindle and onto the spindle collar. Align the Plate vertically on the spindle collar. When positioned, remove the #8‐32 SHCS.6. Thread the supplied 1/4‐20 x 1” SHCS into the end of the Plate with the slot. Slide the Plate up ontothe spindle collar (the non ‐rotating part). Align the front edge of the Plate with the front edge of the bottom of the mill head, and align the Plate in the vertical center of the spindle collar. Place two parallels between the top of the Plate and the bottom of the mill head. Push the Plate upward against the parallels and mill head and lock the quill. Tighten the 1/4‐20 SHCS.Quill Stop V2 Installation Guide 11/16/20147. This step for SX3 mills only. Rotate the Plate and adjust the tongue of the mill’s depth gage so thatthe two holes for the mill’s depth gage align with the two holes in the Plate. Fasten the tongue of the mill’s depth gage to the Plate using the two screws that were removed from the mill’s depth gage bracket earlier. Unlock the quill and remove the parallels. Check that the quill moves up and down freely and that the Mill’s depth gage / Plate connection is not binding and interfering with the quill operating smoothly. If there is binding, then loosen the depth gage screws, loosen the Plate’s 1/4‐20 SHCS, and rotate the Plate slightly, then re ‐tighten all screws and re ‐check for a smooth operation of the quill.8. Screw the flattened end of the 1/2‐20 threaded rod into the hole in the Plate leaving one or twothreads of the flat showing above the surface of the Plate. Secure the threaded rod using the supplied 1/4‐20 socket set screw.9. If you have the stainless steel button nut, turn it upside down with the larger diameter surfacefacing up. This will act as a rest for the Stop Block. The top and bottom of the steel black oxide Button Nut are the same so orientation of this type of Button Nut is irrelevant. Slide the Button Nut down over the 1/2‐20 threaded rod until it contacts the torsion spring cover on the side of the mill head. Release the button and rotate it counter clockwise to provide a slight clearance with the torsion spring cover.10. Slide the Stop Block down over the 1/2‐20 threaded rod so that it sits on top of the Button Nut. Aplastic spacer is provided to center the 1/2‐20 threaded rod in the center of the 5/8” hole in the Stop Block. Slide the supplied plastic spacer down over the 1/2‐20 threaded rod (this is a bit difficult due to the tight fit), and continue down through the hole in the Stop Block. The Stop Block should now be level and correctly positioned on top of the Button Nut.11. Insert a 9/32” transfer pin or drill through one of the holes in the Stop Block and mark a spot on theside of the mill head. Remove the Stop block and drill and tap a 1/4‐20 hole at the spot just marked in the side of the mill head. Be careful to make sure the drill is perpendicular to the mill head. Use a 1/8” drill to drill a pilot hole, then a #7 or 13/64” drill for the final hole. Chamfer and tap the hole (use a tapping block if available). Replace the Stop Block and secure it to the mill head with the supplied 1/4‐20 x 5/8 SHCS. Repeat this procedure for the other Stop Block hole.12. Remove the Stop block and Button Nut from the 1/2‐20 threaded rod and then slide the Stop Blockdown the 1/2‐20 threaded rod and secure it to the side of the mill head. The 1/2‐20 threaded rod should be centered and move freely in the 5/8” Stop Block hole.13. Slide the Button Nut down over the 1/2‐20 threaded rod to any spot above the Stop Block and checkthe operation of the Quill Stop by rotating the quill until the Button Nut contacts the Stop Block. Minor adjustments may be made to the position of the Stop Block and the rotation of the Plate by loosening the fasteners, adjusting, and re ‐tightening the fasteners.Quill Stop V2 Installation Guide 11/16/2014OperationThe Quill Stop is simple to operate, simply press the button and the nut disengages from the thread. Slide to desired position and release the button to engage the threads. Turning the nut then allows for precision micro ‐adjustments of depth of cut.The Quill Stop is great for doing chamfers. With the Spindle stopped and the chamfer tool in the spindle and centered on the hole, lower the quill until the chamfer tool seats in the hole. Then lower the Button Nut until it contacts the Stop Block. Rotate the Button Nut clockwise a half ‐turn to back out of the hole a bit and release the quill. Lower the spindle using the quill to make sure that the chamfer tool is not contacting the part. Start the spindle turning (150 RPM is recommended for chamfers) and lower the spindle using the quill. Then start a cycle of rotating the Button Nut counter clockwise in smallincrements while checking the depth of the chamfer by lowering and raising the quill. This is a great way to sneak ‐up on the correct chamfer depth.Installed Profile Installed FrontInstalled Close‐up Install & Tighten Threaded RodStop Block Setup Mark Stop Block HolesTighten Stop Block Fasten Depth Gage to Plate。
网络通信控制器netX系列说明书
netXThe future for your communicationConnection to all networks with only one controllerYour BenefitsnetX – networX on chipThe universal communications platformAs slave or master for all Fieldbuses and Real-Time Ethernet systems Consistent, continuous interfaces across all systemsFieldbus orReal-Time Ethernet?netX implementation or Integration in theYour Access to the netX WorldDefining thelevel of DevelopmentDesign Your Own FrameworkOptions & AccessoriesLicense Model ALicense Model BDesign GuideAutomated manufacturing testsParticipation in regular netX Technology Meetings Extended license contractWorldwide, more than 150 renowned device manufacturer use the netX as a basis for the implementation of own communications interfaces(Software and maintenance contract)Your Flexibility at a GlanceProviding support and consultancy during your development phase Developer forum for exchanging experiencesHilscher's Range of Services You design - You specify -We support We develop= Hilscher Service -= InapplicableCommunication, Application and Network Access: netX netX 100 / 500: Slave + MasterApplication CasesHMI TerminalnetX 100 / 500 Slave / Master FB / RTEVisualization / PLCCommunication: Fieldbus (FB)Real-Time Ethernet (RTE)Application: e.g. Drive control Data acquisitionSensor barrier control-CCustomer's deviceHeadquarters GermanyHilscher Gesellschaft für Systemautomation mbH Rheinstrasse 1565795 Hattersheim Phone: +49 (0) 6190 9907-0 Fax: +49 (0) 6190 9907-50 E-Mail:***************** Web: SubsidiariesChinaHilscher Systemautomation(Shanghai) Co. Ltd.200010 ShanghaiPhone: +86 (0) 21-6355-5161E-Mail: i***************IndiaHilscher India Pvt. Ltd.New Delhi-110065Phone: +91 11 43055431E-Mail: i***************ItalyHilscher Italia S.r.l.20090 Vimodrone (MI)Phone: +39 02 25007068E-Mail: i***************JapanHilscher Japan KKTokyo, 160-0022Phone: +81 (0) 3-5362-0521E-Mail: i***************KoreaHilscher Korea Inc.Suwon, Gyeonggi, 443-734Phone: +82 (0) 31-695-5515E-Mail: i***************SwitzerlandHilscher Swiss GmbH4500 SolothurnPhone: +41 (0) 32 623 6633E-Mail: i***************USAHilscher North America, Inc.Lisle, IL 60532Phone: +1 630-505-5301E-Mail: i***************11/212GBFranceHilscher France S.a.r.l.69500 BronPhone: +33 (0) 4 72 37 98 40E-Mail: ****************Learnmore。
Espressif Systems (Shanghai) Co.,Ltd.产品说明书
EMITIDO POR / ISSUED BYLGAI TECHNOLOGICAL CENTER - No. 0370 (APPLUS)SOLICITANTE / APPLICANTEspressif Systems (Shanghai) Co.,Ltd.FABRICANTE (Nombre, Dirección)MANUFACTURER (Name, Address) Espressif Systems (Shanghai) Co.,Ltd.Suite 204, Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China COMERCIALIZADO POR (marca)COMMERCIALISED BY (Brand) ESPRESSIFPRODUCTOPRODUCT Wi-Fi & Bluetooth Internet of Things Module TIPOSTYPESESP32-S3-MINI-1U Versión HW / FMWHW / FMW versionSW: V1.1.3.0HW: V1.0DIRECTIVA APLICABLEAPPLICABLE DIRECTIVEDIRECTIVA 2014/53/UE DEL PARLAMENTO EUROPEO Y DEL CONSEJO, DE 16 DE ABRIL DE 2014, RELATIVA A LA ARMONIZACIÓN DE LAS LEGISLACIONES DE LOS ESTADOS MIEMBROS SOBRE LA COMERCIALIZACIÓN DE EQUIPOS RADIOELÉCTRICOSDIRECTIVE 2014/53/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCILOF 16 APRIL 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF RADIO EQUIPMENTDESCRIPCIÓNDESCRIPTIONThe device is a Wi-Fi & Bluetooth Internet of Things Module with Wi-Fi 2.4G and Bluetooth.CUMPLE CON LOS REQUISITOS ESENCIALESMEET ESSENTIAL REQUIREMENTSArt.3.1a Salud y Seguridad / ☒Art.3.1a Health & SafetyArt. 3.2 Uso eficiente del espectro radioeléctrico / ☒Art.3.2 Efficient use of Radio spectrumArt.3.1b EMC / ☒Art.3.1b EMC Art 3.3 Características especiales / ☐Art.3.3 Special characteristicsEste documento carece de validez sin su anexo, cuyo número coincide con el del presente certificado. // This document in not valid without its technical annex, whosenumber coincides with the number of the certificate.La evaluación de la documentación técnica entregada se encuentran recogidos en el expediente técnico número: 22/36400865The evaluation of the technical documentation delivered is included in the technical file number: 22/36400865Restricciones (si aplican) / Restrictions (if apply):Bellaterra, 17 de marzo de 2022 // 17th March 2022José Luis Medina DirectorElectrical & Electronics - SpainEste Certificado es válido mientras no se produzcan cambios en el estado de la técnica que indiquen que el equipo radioeléctrico aprobado ya no puede cumplir los requisitos esenciales de la Directiva 2014/53/UE y no haya notificaciones en el tipo aprobado que puedan afectar a la conformidad con los requisitos esenciales de la Directiva 2014/53/UEThis Certificate is valid as long as there are no changes in the prior art indicating that the approved radio equipment can no longer meet the essential requirements of Directive 2014/53/EU and No.0370-RED-5007LGAI Technological Center, S.A. (APPLUS)Campus UAB - Ronda de la Font del Carme s/n 08193 Bellaterra (Barcelona) T +34 93 567 20 00 F +34 93 567 20 01 No.CERTIFICADO DE EXAMEN UE DE TIPOEU-TYPE EXAMINATION CERTIFICATEF +34 93 567 20 01Anexo técnico Ed. 117/03/2022ANEXO TÉCNICOTECHNICAL ANNEX0370-RED-5007L G A I T e c h n o l o g i c a l C e n t e r , S .A . C .I .F A 63207492A. MODEL DESCRIPTIONA.1. GENERAL INFORMATION ON THE RADIO EQUIPMENT:Manufacturing country: China Brand: ESPRESSIFCommercial designation: ESPRESSIFCountry of commercialization: European UnionRadio service: Wi-Fi 2.4G and BluetoothApplication: Wi-Fi & Bluetooth Internet of Things ModuleA.1.1 TRADE VERSIONS/VARIANTS: ESP32-S3-MINI-1UA.2. FEATURES: Wi-Fi & Bluetooth Internet of Things ModuleA.3. SOFTWARE VERSION(S): V1.1.3.0A.4. HARDWARE VERSION(S): V1.0A.5. OTHER COMPONENTS- Disposable antenna YES ☐ NO ☒o Antenna gain (dBi)*:(*) only in case of YESF +34 93 567 20 01Anexo técnico Ed. 117/03/2022ANEXO TÉCNICOTECHNICAL ANNEX0370-RED-5007L G A I T e c h n o l o g i c a l C e n t e r , S .A . C .I .F A 63207492A.6. OPERATING FREQUENCIES AND MAXIMUM POWER EMITTED BY BANDN/A: Not applicable N/D: Not defined* Conducted power for mobile technologies and EIRP for other technologies.A.7. OTHER PARAMETERS OF RADIO INTERFACE SPECIFICATIONS (RI)Requires license/Use authorization: YES ☐ NO ☒BAND SERVICEOPERATIONAL FREQUENCY(TX)MAX POWER* CNAF IR CNAF/ UN-XXX Band 1 BLE F_min: 2402MHz F_max: 2480MHz 9.25 dBm IR-163 UN-85 Band 2WiFi 2.4GHzF_min: 2412MHz F_max: 2472MHz19.95 dBmIR-163UN-85F +34 93 567 20 01Anexo técnico Ed. 117/03/2022ANEXO TÉCNICOTECHNICAL ANNEX0370-RED-5007L G A I T e c h n o l o g i c a l C e n t e r , S .A . C .I .F A 63207492B. TEST PROTOCOLREQUIREMENT STANDARDLaboratory Report no. Health and Safety (Article 3.1a) EN IEC 62368-1:2020+A11:2020 TA Technology(Shanghai) Co., Ltd. R2112A1105-L1 EN 50665:2017 R2112A1105-M1 EN IEC 62311:2020 EMC (Article 3.1b) EN 301 489-1 V2.2.3 TA Technology(Shanghai) Co., Ltd.R2112A1105-E1EN 301 489-17 V3.2.4EN 55032:2015+A11:2020 EN 55035:2017+A11:2020 Radio Aspects (Article 3.2) EN 300 328 V2.2.2TA Technology(Shanghai) Co., Ltd.R2112A1105-R1C. RESTRICTIONSRestrictions: YES ☐ NO ☒ Describe restrictions: N/AF +34 93 567 20 01Anexo técnico Ed. 117/03/2022ANEXO TÉCNICOTECHNICAL ANNEX0370-RED-5007L G A I T e c h n o l o g i c a l C e n t e r , S .A . C .I .F A 63207492D. ACTIVITIES CARRIED OUT BY THE NBTechnical Documentation Review☐ Assembly drawings(s) ☒ Block diagram ☒ Circuit diagram/schematics ☒ External photographs ☒ Label drawing/location ☒ User manual ☒ Internal photographs ☒ Operational description ☒ Risk Assessment☒ Test set-up photographs☒ Test reports ☒ EU declaration of conformity ☒ Bill of materials☒ PCB layout☐ Installation diagrams and explanations☒ List of applied (harmonized and non-harmonized) standardsOther activities☒ RIS☒ EFIS/CNAF☒ Review Technical Justifications ☒ Analysis report☒ EU type certification issuedE.ADDITIONAL INFORMATION:Radio Equipment Directive 2014/53/EU, Article 10.4: Manufacturers shall keep the technical documentation and the EU declaration of conformity for 10 years after the radio equipment has been placed on the market.Radio Equipment Directive 2014/53/EU, Annex III, Module B.7: The manufacturer shall inform the notified body that holds the technical documentation relating to the EU-type examination certificate of all modifications to the approved type that may affect the conformity of the radio equipment with the essential requirements of this Directive or the conditions for validity of that certificate. Such modifications shall require additional approval in the form of an addition to the original EU-type examination certificate.This review includes draft standards, deviations from the standards and technical justification for compliance.。
Baculovirus Expression Vector System (BEVS) 产品说明书
IntroductionThe Baculovirus Expression Vector System (BEVS) is a widely used tool for the production and expression of baculoviruses and recombinant proteins. The Sf9 and Sf21 insect cell lines, derived from the ovaries of the fall armyworm Spodoptera frugiperda, have been the cell lines of choice when using the BEVS technology. Recently, Protein Sciences Corporation1developed a new cell line derived from Spodoptera frugiperda, which is morphologically and genetically different from the Sf9 cell line2. The cell line, expres SF+®, was developed using a series of stringent selection steps in serum-free medium with added insulin2. The cell line was designed to possess characteristics that favor the commercial production of baculoviruses and recombinant proteins.EX-CELL TM420 Serum-Free Medium for nsect Cells is a serum-free, protein-free medium designed and optimized for suspension culture of Spodopteran cell lines. Previous studies with this medium have shown that Sf9 and Sf21 cells adapt easily to EX-CELL TM420, and that EX-CELL TM420 supports high cell densities, baculovirus production and secreted and intracellular recombinant protein expression3,4. Experiments were designed to assess the ease with which expres SF+®cells adapt to EX-CELL TM420, to evaluate cell growth and viability in shaker flask culture and to determine freezing conditions. The results demonstrate that expres SF+®cells quickly adapt to EX-CELL TM420, with no observed decrease in cell growth or viability. expres SF+®cell viabilities and densities in EX-CELL TM420 were comparable to those seen in cultures grown in Sf-900 I I SFM, (I nvitrogen Corporation) and expres SF+®cells frozen in fresh EX-CELL TM420 medium with 10% dimethyl sulfoxide (DMSO) exhibited viabilities of about 90% upon thawing from storage in liquid nitrogen.MaterialsCells• expres SF+®Serum-Free I nsect Cells, Protein Sciences Corporation, Catalog No. 1000Media and Supplements• Sf-900 II SFM, Invitrogen Corporation, Catalog No. 10902 • EX-CELL TM420, SAFC Biosciences, Inc., Catalog No. 14420• L-Glutamine Solution 200 mM, SAFC Biosciences, I nc., Catalog No. 59202• DMSO, Sigma-Aldrich Co., Catalog No. D-2650 Methodsexpres SF+®Culture Initiationexpres SF+®cells were handled and subcultured per the manual (Version 1.4) provided by the manufacturer. As such, a new vial of frozen expres SF+®cells was thawed rapidly with agitation in a 28 C water bath. Once a small ice pellet remained, the contents of the vial were added to 100 mL pre-warmed Sf-900 II SFM in a 250 mL spinner flask. The flask was incubated at 28 C in a non-CO2atmosphere, with constant stirring at 100 rpm. The cells were subsequently subcultured into triplicate shaker flasks (50 mL volume per 125 mL flask) at a seeding density of 1.5 x 106cells/mL. Flasks were incubated at 28 C, on an orbital shaker at 135 rpm. Cell counts and viability were monitored using trypan blue exclusion methods. Flasks were subcultured every 2 - 3 days using the same seeding density as above.Direct Adaptation and Continuous Growth of expres SF+®Cells in EX-CELL TM420Cultures initiated in Sf-900 II SFM were passed five times to ensure the cultures were well established. On the sixth pass, the cells were directly subcultured into 100% EX-CELL TM420 medium at a seeding density of 1.5 x 106cells/mL. These cultures were monitored for an additional five passes to assess cell density and viability in EX-CELL TM420. On the sixth pass, a kinetic growth curve was generated by obtaining daily cell counts, until culture viability dropped below 50%.Growth Characteristics of the expres SF+®Serum-Free Insect Cell Line in EX-CELL TM420 Serum-Free MediaTechnical BulletinUnited States SAFC Biosciences, Inc. 13804 W. 107th Street EuropeSAFC Biosciences Ltd.Smeaton Road, West PortwayAsia PacificSAFC Biosciences Pty. Ltd.18-20 Export DriveFreeze/T haw Evaluation of expres SF+®Cells in EX-CELL TM 420To evaluate freezing conditions in EX-CELL TM 420, a cell bank of expres SF+®cells was prepared. Mid-log phase cells ( > 95%viable) were harvested and centrifuged to remove spent medium. The cells were resuspended at 3 x 107cells/mL in a cryopreservation medium consisting of 90% fresh EX-CELL TM 420 medium and 10% DMSO. Cells were frozen at a controlled rate and stored under liquid nitrogen. Cell viability post-thaw was determined by thawing 3 vials (1 mL each) of cells and combining them directly into a 125 mLTo demonstrate the kinetic growth curve of expres SF+®cellsin continuous culture, expres SF+®cells were maintained in EX-CELL TM 420 for seven days (see Figure 2). Cell densities increased exponentially over the first two days then appeared to plateau between days two to four, reaching maximum densities of approximately 7 x 106cells/mL. Culture viabilities remained high (above 95%) until day four, after which viabilities dropped to below 50% by day seven. Based on these results, it was confirmed that the optimal time for subculture is during the exponential growth phase of the cells, which is between two to three days in culture.Conclusions• expres SF+®cells can be transferred directly into EX-CELL TM420 from Sf-900 I I SFM without an adaptation period.• expres SF+®cells grown in EX-CELL TM420 achieve densities of 6-7 x 106cells/mL with viabilities greater than 95%.• expres SF+®cells can be frozen and recovered in EX-CELL TM420 with only the addition of 10%DMSO. References1. Protein Sciences Corporation, Meriden, CT2. expres SF+®Serum-Free I nsect Cell Line, Manual Version1.4, Protein Sciences Corporation3. Dianne E. Potts, Justine A. Malinski, Laura T. Kakach andSarah L. Gilliland, Commercially Available Serum-Free Insect Media:A Comparison of Sf9 Growth Dynamics and Protein Production, SAFC Biosciences Literature Reference R011, 2000.4. Susan E. Lenk, Thomas W. Irish and Karen J. Etchberger,EX-CELL TM420 Serum-Free Medium for the Growth of Spodopteran (Sf9 and Sf21) Insect Cells, SAFC Biosciences Literature Reference R015, 2000.Warranty, Limitation of RemediesSAFC Biosciences warrants to the purchaser for a period of one year from date of delivery that this product conforms to its specifications. Other terms and conditions of this warranty are contained in SAFC Biosciences’ written warranty, a copy of which is available upon request. ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED. In no case will SAFC Biosciences be liable for any special, incidental, or consequential damages arising out of this product or the use of this product by the customer or any third party based upon breach of warranty, breach of contract, negligence, strict tort, or any other legal theory. SAFC Biosciences expressly disclaims any warranty against claims by any third party by way of infringement or the like. THIS PRODUCT IS INTENDED FOR PURPOSES DESCRIBED ONLY AND IS NOT INTENDED FOR ANY HUMAN OR THERAPEUTIC USE.Additional Terms and Conditions are contained in the product Catalog, a copy of which is available upon request.EX-CELL™ is a trademark of SAFC Biosciences, Inc.expres SF+®is a registered trademark of Protein Sciences Corporation.© 2006 SAFC Biosciences, Inc.Issued February 2006 T0660204 0805United States SAFC Biosciences, Inc. 13804 W. 107th Street Lenexa, Kansas 66215 EuropeSAFC Biosciences Ltd.Smeaton Road, West PortwayAndover, Hampshire SP10 3LFAsia PacificSAFC Biosciences Pty. Ltd.18-20 Export DriveBrooklyn, Victoria 3025。
MD-012 Disciplined Oscillator Module商品说明书
MD-012Disciplined Oscillator ModuleThe MD-012 is a Microchip standard platform module that provides 1 pps TTL,10 MHz sine wave and 10 MHz square wave outputs that are disciplined to an external reference input. Internal to the module is a Microchip digitally corrected OCXO.•1pps TTL output signal• 10MHz sinewave and square wave output • Other RF output frequencies available• Adaptive aging correction during holdover • Barometric pressure correction • Serial communications interface• 1PPS to 75 MHz Reference Frequency Input • Evaluation kit with software• Basestation Communications • Digital Video Broadcast • E911 Location Systems• General Timing and Synchronization • Military Radio • Radar SystemsFeaturesBlock DiagramApplicationsQuartz Oscillator(OCXO)Processor/ControllerOutput Frequency Generation1PPS OutputRF Output(10 MHz standard - other frequencies available)SerialFigure 1. Functional Block DiagramOutput Locked Module OKHardwareResetManual Holdover External ReferenceInputNotes:• RF and 1pps input and output connectors are MCX type (SMA, SMB, MMCX connectors require additional part numbers).• Keyed connector is Samtec FTSH-108-01LDVK type.• Dimensions: mm• Module height in part number is the sum of oscillator height, board, and clearancePackage OutlineAlthough ESD protection circuitry has been designed into the MD-012 proper precautions should be taken when handling and mounting.Microchip employs a human body model (HBM) and a charged-device model (CDM) for ESD susceptibility testing and design protectionReliabilityMicrochip qualification includes aging various extreme temperatures, shock and vibration, temperature cycling, and IR reflow simulation. The MD-012 family is capable of meeting the following qualification tests:Ordering Information InstructionsCustomization to unique customer requirements is available and is common for this level of integration. Common customizations include alternate output frequencies, temperature ranges, differing values and methods of hold over specification, and holdover optimization in the frequency domain. The table below lists exisiting combinations available as of the date of publication of this data sheet. Please contact the factory for additional options.Ordering InformationMD - 012 3 - B X E - 15E7 - 10M0000000Product FamilyMD: Precision ModulesPackage 65x115mm Height 3: 19.5 mmSupply Voltage B: +12VHold Over15E7: 1.5 µs hold over option 40E7: 4.0 µs hold over optionFrequencyRF Output Code X: standard outputs per specificationTemperature Range E: -40°C to +85°C1) Holdover and aging performance is after 7 days of power-on time. Temperature and aging rates are whendevice is not locked. Performance measured in still air.2) After customer applies correct offset using cable delay command while locked, after 24 hours of locked opera-tion3) ADEV at t =86400s while locked, after 24 hours of locked operation4) The status locked indicator is intended to indicate when the module is fully locked to a reference.5) The Hardware OK indicator is intended to indicate when the module is operating properly without any failures, including hardware, software or parameter out of range.6) The Rx pin is the serial interface input and the Tx pin is the serial interface output. The serial interface shall operate at 115,200 baud with eight (8) data bits, one (1) stop bit and no parity.USA:100 Watts StreetMt Holly Springs, PA 17065Tel: 1.717.486.3411Fax: 1.717.486.5920Europe:Landstrasse74924 NeckarbischofsheimGermanyTel: +49 (0) 7268.801.0Fax: +49 (0) 7268.801.281Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your reasonability to ensure that your application meets with your specifications. MICRO-CHIP MAKES NO REPRESENTATION OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION INCLUDING, BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly, or otherwise, under any Microchip intellectual property rights unless otherwise stated.。
Lorex MPX HDSe
3.
2. Clic Droit: • En mode visionnement en direct :
Contrôle des caméras PTZ (non incluses) Ajuste les réglages de la couleur et de l’image de la caméra Voir les informations du système Démarrer/arrêter le mode séquence Esactiver l’alarme sonore
6: EN MARCHE
Bip
Si le système émet un signal sonore au démarrage, le câble Ethernet n’est peut-être pas branché, ou le système n’est peut-être pas connecté à Internet. Pour arrêter le signal sonore : 1. Brancher un câble Ethernet du système au routeur et redémarrer le système. OU 2. Cliquer avec le bouton droit et cliquer sur Disable Beep.
Cliquer sur et sélectionner SETTING
4. Cliquer sur GENERAL et sélectionner l’onglet Date&Time.
基于多级全局信息传递模型的视觉显著性检测
2021⁃01⁃10计算机应用,Journal of Computer Applications 2021,41(1):208-214ISSN 1001⁃9081CODEN JYIIDU http ：//基于多级全局信息传递模型的视觉显著性检测温静*，宋建伟（山西大学计算机与信息技术学院，太原030006）（∗通信作者电子邮箱wjing@ ）摘要：对神经网络中的卷积特征采用分层处理的思想能明显提升显著目标检测的性能。
然而，在集成分层特征时，如何获得丰富的全局信息以及有效融合较高层特征空间的全局信息和底层细节信息仍是一个没有解决的问题。
为此，提出了一种基于多级全局信息传递模型的显著性检测算法。
为了提取丰富的多尺度全局信息，在较高层级引入了多尺度全局特征聚合模块（MGFAM ），并且将多层级提取出的全局信息进行特征融合操作；此外，为了同时获得高层特征空间的全局信息和丰富的底层细节信息，将提取到的有判别力的高级全局语义信息以特征传递的方式和较低层次特征进行融合。
这些操作可以最大限度提取到高级全局语义信息，同时避免了这些信息在逐步传递到较低层时产生的损失。
在ECSSD 、PASCAL -S 、SOD 、HKU -IS 等4个数据集上进行实验，实验结果表明，所提算法相较于较先进的NLDF 模型，其F -measure （F ）值分别提高了0.028、0.05、0.035和0.013，平均绝对误差（MAE ）分别降低了0.023、0.03、0.023和0.007。
同时，所提算法在准确率、召回率、F -measure 值及MAE 等指标上也优于几种经典的图像显著性检测方法。
关键词：显著性检测；全局信息；神经网络；信息传递；多尺度池化中图分类号：TP391.413文献标志码：AVisual saliency detection based on multi -level global information propagation modelWEN Jing *，SONG Jianwei（School of Computer and Information Technology ，Shanxi University ，Taiyuan Shanxi 030600，China ）Abstract:The idea of hierarchical processing of convolution features in neural networks has a significant effect onsaliency object detection.However ，when integrating hierarchical features ，it is still an open problem how to obtain rich global information ，as well as effectively integrate the global information and of the higher -level feature space and low -leveldetail information.Therefore ，a saliency detection algorithm based on a multi -level global information propagation model was proposed.In order to extract rich multi -scale global information ，a Multi -scale Global Feature Aggregation Module（MGFAM ）was introduced to the higher -level ，and feature fusion operation was performed to the global information extracted from multiple levels.In addition ，in order to obtain the global information of the high -level feature space and the rich low -level detail information at the same time ，the extracted discriminative high -level global semantic information was fused with the lower -level features by means of feature propagation.These operations were able to extract the high -level global semantic information to the greatest extent ，and avoid the loss of this information when it was gradually propagated to the lower -level.Experimental results on four datasets including ECSSD ，PASCAL -S ，SOD ，HKU -IS show that compared with the advanced NLDF （Non -Local Deep Features for salient object detection ）model ，the proposed algorithm has the F -measure （F ）valueincreased by 0.028、0.05、0.035and 0.013respectively ，the Mean Absolute Error （MAE ）decreased by 0.023、0.03、0.023and 0.007respectively ，and the proposed algorithm was superior to several classical image saliency detection methods in terms of precision ，recall ，F -measure and MAE.Key words:saliency detection;global information;neural network;information propagation;multi -scale pooling引言视觉显著性源于认知学中的视觉注意模型，旨在模拟人类视觉系统自动检测出图片中最与众不同和吸引人眼球的目标区域。
CommScope FLX XP4202M XGS-PON R-OLT 产品说明书
CommScope FLX™ XGS-PON Remote Optical Line Terminal (R OLT) OLTwith vOLT for CommScope HFC Nodes and VHubs, specifically designedfor cable MSOsPRELIMINARY SPECIFICATIONCommScope FLX XP4202M R-OLT ModuleThe XP4202 XGS-PON R-OLT (Remote Optical Line Terminal) module for CommScope HFC Nodes and VHubs is specifically designed for cable MSOs to substantially increase the ROI of their existing network infrastructure by adding high bandwidth XGS-PON based services to their legacy DOCSIS® HFC network. The R-OLT lowers the cost of deploying PON, saves space and power using existing fiber and enclosures, and drives PON based services through the last mile, enabling the migration to FTTX through seamless coexistence of RF/HFC, RFoG overlay, and digital returns all in the same node or VHub, supporting nodes with coexistent RF/PON, or VHubs with RFPON (RFoG+PON overlay) or PON-only services.The R-OLT incorporates full traffic management and PON MAC/PHY capabilities in a compact module and utilizes standard long haul10GE uplinks, including CWDM and DWDM options, to connect to the S-Leaf switch/router in the Converged Interconnect Network (CIN),so operators can extend the deployment of FTTX to serve customers at distances well beyond the typical 20km reach of centralized chassis-based PON, while utilizing their transport backhaul fiber resources efficiently. For subscriber access, the R-OLT includes two XGS-PON ports, each supporting coexistent symmetric 10G/10G XGS-PON, 2.4/1.2 GPON or combo mode (coexistent GPON and XGS-PON). Each XGS-PON port is fully interoperable with GPON and XGS-PON ONUs via OMCI and supports 128 ONUs for a total of 256 subscriber ONUs per R-OLT module.CommScope FLX Virtual OLT (vOLT)The CommScope FLX™ vOLT is a virtual OLT application supporting a software-defined networking architecture (SDN) that separates theManagement plane from the control and data planes found in the physical network function (PNF) of the R-OLT. By centralizing thecontrol plane, the vOLT facilitates network management and programmability to improve scalability of operating a highly scaled, disaggregated network with PON DAA devices like the R-OLT, thus simplifying and reducing the number of interface points to operatorback-office system. Key features of the vOLT include:Seamless integration of the management and assurance of multiple R-OLTs resulting in a fully managed service deployment using existing operational production processes and proceduresFull lifecycle management of multiple R-OLTs from initial deployment through the application of services and subscriberprovisioning, and integration into monitoring and network operational support systems.For GPON and XGS-PON based PON services, integration into the northbound provisioning and management systemsFull standards-based interfaces to northbound SDN and telemetry gathering applicationsProduct ClassificationRegional Availability Asia | Australia/New Zealand | EMEA | Latin America | North AmericaProduct Type Remote OLTProduct Brand CommScope FLX™14Page ofPage of 24General SpecificationsLED Indicator, PWRDark = Module OFF (not receiving power) | Green = Module ON (receiving power)LED Indicator, PONRefer to TM 1512184 XE4202M Physical Installation Guide for LED indicator colors and definitions Ports, Network Side CommScope qualified SFP+ transceivers are purchased separately | LC Duplex: Two(2) network-side optical ports (NSI Port 0 and NSI Port 1) support single-mode SFP+ (10Gbps) cages for standard uplink applicationsPorts, Subscriber Side CommScope qualified SFP+ PON transceivers are purchased separately | Each portsupports up to 128 subscriber ONUs: (256 total per module, using externalsplitters) | Two (2) simplex bidirectional subscriber-side optical XFP plug-in ports(PON 0 and PON 1) for ITU-T G.984 GPON, ITU-T G.9807.1 XGS-PON or ITU-T G.984/G.9807.1 G/XGS-PON Combo mode optical transceiver supportProvisioning and MonitoringvOLT SDN: Cloud-based, virtualized OLT management and OMCI provisioning andmonitoring control plane interface for R-OLTs and Optical Network Units (ONUs)DimensionsHeight38.1 mm | 1.5 in Width101.6 mm | 4 in Length 165.1 mm | 6.5 inPort ConfigurationElectrical SpecificationsCAN/CSA-C22.2 No. 60950-1-07+Amd 1+Amd 2 | CAN/CSA-C22.2 No.60950-22-Page of 34Electrical Safety Standard CAN/CSA-C22.2 No. 60950-1-07+Amd 1+Amd 2 | CAN/CSA-C22.2 No.60950-22-07+GI1 (R2012) | EN 60950-1:2006+A11+A1+A12+A2 | EN 60950-22:2006+A11 | IEC 60950-1:2005+A1+A2 | IEC 60950-22:2005 | IEC/EN 60825-1:2014 | IEC/EN 60825-2:2004+A1+A2 | UL 60950-1-07+A1+A2 | UL 60950-22:2007 R12.11Electrical Safety Standard Note Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to LaserNotice No. 50, dated June 24, 2007Electromagnetic Compatibility (EMC)CFR 47 Part 15, Subpart B, Class A | CISPR 24 IEC/EN 55024 | CISPR 32 IEC/EN55032 | VCCI A | VCCI B | VCCI V-32-1Power Consumption Note 35.5 W maximum, including two (2) XFP and two (2) SFP+ transceivers operating at 10/10 and 1/1 or Turbo GbpsPower Requirements+24VDC and +5VDC, supplied by NH2000, NC/NH4000 VHub/UVHubplatform | PS4101 or PS4102 power supplies (required), depending on the node/VHub platform usedOrdering TreeEnvironmental SpecificationsOperating Temperature-40 °C to +60 °C (-40 °F to +140 °F)Storage Temperature-40 °C to +60 °C (-40 °F to +140 °F)Relative Humidity 5%–95%, non-condensingPackaging and WeightsWeight, net 1.293 kg | 2.85 lbRegulatory Compliance/CertificationsAgency ClassificationISO 9001:2015Designed, manufactured and/or distributed under this quality management systemROHS CompliantCompliantUK-ROHS44Page of。
Milestone AV Technologies 产品说明书
Milestone AV Technologies6436 City West ParkwayEden Prairie, MN 55344 USACustomer ServiceAmericas:800-359-5520•651-484-7988•**************Europe,MiddleEast,andAfrica:+31(0)495580852•************************** Asia Pacific:8675589969226•**********************©2012 Milestone AV Technologies, a Duchossois Group Company.IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USESpecifi cationsÙW e ight ca p acity-DO NOT EXCEED : 22.6 kg (50 lb) includ es TV and any acc ess ori es ÙTilt: ±12°CAUTION: Avoid p ot e ntial pe r s onal injuri es and p ro pe rty damag e !ÙDo not u se thi s p roduct for any p ur p o se not e x p licitly spe cifi e d by manufactur e r . ÙTh e wall mu s t b e ca p abl e of s u pp orting fi v e tim es th e w e ight of th e monitor and mount combin e d . ÙThi s p roduct i s d es ign e d for u se in wood fram e wall s only!ÙIf you do not und e r s tand th ese in s truction s , or hav e doubt s about th e s af e ty of th e in s tallation, a sse mbly or u se of thi s p roduct, contact Cu s tom e r S e rvic e or call a qualifi e d contractor .ÙManufactur e r i s not r esp on s ibl e for damag e or injury cau se d by incorr e ct a sse mbly or u se.3mmWARNING: This productcontains small items that could be a choking hazard if swallowed. B e for e s tarting a sse mbly, v e rify all p art s ar e includ e d and undamag e d . If any p art s ar e mi ss ing or damag e d, do not r e turn th e damag e d it e m to your d e al e r; contact Cu s tom e r S e rvic e. N e v e r u se damag e d p art s !NOTE: M4, M6, or M8 d es crib es th e diam e t e r, mm d es crib es th e l e ngth of s cr e w s that ar e lab e l e d M# X ##mm . Not all hardwar e includ e d will b e u se d .[01] x 1[02] x 1[03] x 2[05] x 4[06] x 4[07] x 4[08] x 4[09] x 4[10] x 4[11] x 4[12] x 4[13] x 4[14] x 4[15] x 4[17] x 4[16] x 8M4M6/M8M4M6/M8M8 x 16mm M8 x 35mmM6 x 12mm M6 x 20mm M6 x 35mmM4 x 12mm M4 x 30mmSupplied Parts and HardwareIn s tall brack e t e xt e n s ion s[03] ONLY if your TV ha s a 200 x 200 mm (79⁄10 x 79⁄10 in.) hol e p att e rn.M4/M6/M8En s ur e th e brack e t i s l e v e l on th e back of th e TV .NOTE: If th e hol e p att e rn on your TV i s 75mm x 75mm th e wa s h e r s [16, 17] will not b e u se d .If you r e quir e additional sp ac e for cabl es , r e c esses , or p rotru s ion s , choo se confi guration B .[01]Your TV ty pe will h e l p you d e t e rmin e which hardwar e confi guration to u se.A. In s tallation o p tion without sp ac e r s (TV s with fl at back s )B. In s tallation o p tion u s ing sp ac e r s (TV s with irr e gularback s )Hand thr e ad s cr e w s into th e thr e ad e d in se rt s on th e back of your TV to d e t e rmin e th e corr e ct s cr e w diam e t e r (M4, M6, or M8).CAUTION: Avoid p ot e ntial pe r s onal injuri es and p ro pe rty damag e ! V e rify that th e r e ar e ad e quat e thr e ad s to se cur e th e brack e t s to th e monitor . If you e ncount e r r es i s tanc e , s to p imm e diat e ly and contact cu s tom e r se rvic e. U se th e s hort es t s cr e w and sp ac e r combination to accommodat e your n ee d s. U s ing hardwar e that i s too long may damag e your TV .B1-1 Select the hardware diameter and length1 Select TV Hardware and Mount TV BracketEn s ur e th e brack e t i s l e v e l on th e back of th e TV. Standard confi guration s ar e s hown.NOTE: If th e hol e p att e rn on your TV i s75mm x 75mm th e wa s h e r s[16,17] will not b e u se d.For spe cial a pp lication s, or if you ar e unc e rtain about your hardwar e se l e ction, contact Cu s tom e r S e rvic e.L e v e l th e wall p lat e [02] and mark th e hol e location s.CAUTION: Avoid p ot e ntial injuri es or p ro pe rty damag e !Im p ro pe r u se could r e duc e th e holding p ow e r of th e lag bolt . To avoidp ot e ntial injuri es or p ro pe rty damag eÙDO NOT ov e r-tight e n th e lag bolt s [04].ÙTight e n th e lag bolt s [04] only until th e y ar e p ull e d firmly again s t th e wall p lat e [02].V e rify th e c e nt e r of th e s tud u s ing an awl, a thin nail, or an e dg e to e dg e s tud fi nd e r . CAUTION: Avoid p ot e ntial pe r s onal injuri es and p ro pe rtydamag e !ÙAny mat e rial cov e ring th e wall mu s t not e xc ee d 16 mm (5/8 in .). ÙMinimum wood s tud s iz e : common 51 x 102 mm (2 x 4 in .)(nominal 38 x 89 mm (1½ x 3½ in .)).CAUTION: Avoid p ot e ntial injuri es or p ro pe rty damag e ! Pilothol es MUST b e drill e d to a d ep th of 63½ mm (2½ in .), u s ing a 3 mm (1⁄8 in .) diam e t e r drill bit .[02][01]A34.92 mm(13⁄8 in.)[01][02]BS e cur e th e TV to th e wall p lat e u s ing th e locking tab (T). NOTE: If you n ee d to r e mov e th e TV from th e wall p lat e, un se cur e th e locking tab (T).5 Adjust Up / Down Tilt TensionLoo se n th e tilt t e n s ion nut to adju s t th e tilt of your TV. Tight e nth e tilt t e n s ion nut wh e n your TV i s se t to th e d es ir e d tilt.Mil es ton e AV T e chnologi es and it s affi liat e d cor p oration s and s ub s idiari es (coll e ctiv e ly, “Mil es ton e”), int e nd to mak e thi s manual accurat e and com p l e t e. How e v e r, Mil es ton e mak es no claim that th e information contain e d h e r e in cov e r s all d e tail s, condition s, or variation s. Nor do es it p rovid e for e v e ry p o ss ibl e conting e ncy in conn e ction with th e in s tallation or u se of thi s p roduct. Th e information contain e d in thi s docum e nt i s s ubj e ct to chang e without notic e or obligation of any kind. Mil es ton e mak es no r ep r ese ntation of warranty, e x p r esse d or im p li e d, r e garding th e information contain e d h e r e in. Mil es ton e a ss um es no r esp on s ibility for accuracy, com p l e t e n ess or s uffi ci e ncy of th e information contain e d in thi s docum e nt.。
围棋俱乐部的英语作文
围棋俱乐部的英语作文The Go Club: A Hub for Strategic Minds.In the heart of the bustling city, nestled amidst the skyscrapers and bustling streets, lies a serene oasis where the sounds of the outside world fade away. This is the Go Club, a haven for those who seek the tranquility of strategic thinking and the joy of intellectual competition.The Go Club was established a decade ago by a group of passionate enthusiasts who shared a love for the ancient game of Go, also known as Weiqi or Baduk. Its humble beginnings in a small rented space have transformed into a vibrant community that attracts players of all ages andskill levels.The interior of the Go Club is a testament to its unique character. The walls are adorned with historical Go boards, each with its own story to tell. The air is filled with the scent of aged wood, reminding visitors of thegame's rich history and cultural significance. The atmosphere is one of quiet contemplation, punctuated by the occasional click of stones being placed on the board.At the center of the club is the main playing area, where members gather to engage in intense games. The soft lighting creates a cozy ambiance, perfect for hours.。
西方套餐菜单介绍英语作文
西方套餐菜单介绍英语作文Title: Exploring Western Cuisine: An Introduction to Western Set Menus。
In today's globalized world, culinary exploration knows no bounds. One such culinary adventure awaits in the realm of Western cuisine, where set menus offer a curated journey through flavors, textures, and culinary traditions. Let's delve into the intricacies of a typical Western set menu, unveiling the delights and nuances that await the discerning diner.Appetizers:The journey typically begins with an assortment of appetizers, tantalizing the taste buds and setting the stage for the gastronomic experience ahead. A classic option might include a refreshing Caesar salad, featuring crisp romaine lettuce, tangy Caesar dressing, Parmesan cheese shavings, and garlic croutons. Alternatively, acreamy butternut squash soup infused with hints of nutmeg and cinnamon offers a comforting start to the meal, warming the soul with every spoonful.Main Course:The main course serves as the focal point of the meal, showcasing the diversity and richness of Western culinary traditions. For those craving a taste of the sea, a succulent grilled salmon fillet might take center stage, accompanied by a medley of roasted vegetables and a zesty lemon-dill sauce. Alternatively, a hearty serving of beef tenderloin, cooked to perfection and served with a velvety red wine reduction, promises a symphony of flavors that dance on the palate with every bite.Side Dishes:No set menu is complete without an array of side dishes to complement the main course and elevate the dining experience. A medley of roasted potatoes, seasoned with fragrant herbs and garlic, adds a rustic charm to the meal,while sautéed green beans offer a vibrant burst of color and freshness. For those with a penchant for indulgence, a decadent serving of creamy mashed potatoes or buttery mashed sweet potatoes provides the perfect accompaniment to any main course.Desserts:As the meal draws to a close, dessert beckons with promises of sweet indulgence and culinary bliss. A classic choice might include a rich and velvety chocolate mousse, adorned with fresh berries and a dollop of whipped cream, creating a harmonious balance of flavors and textures. Alternatively, a slice of New York-style cheesecake, with its creamy filling and buttery graham cracker crust, offers a timeless finale to the dining experience, leaving diners craving just one more bite.Beverages:To complement the culinary journey, a carefully curated selection of beverages awaits, ranging from crisp whitewines and full-bodied reds to refreshing cocktails and mocktails. For those seeking a taste of tradition, a glass of fine Bordeaux or Chardonnay pairs beautifully with the rich flavors of the main course, while a refreshing mojito or virgin strawberry daiquiri offers a palate-cleansing interlude between courses.In conclusion, a Western set menu promises a culinary voyage like no other, inviting diners to savor the rich tapestry of flavors, textures, and traditions that define Western cuisine. From tantalizing appetizers to decadent desserts, each course tells a story of culinary craftsmanship and cultural heritage, leaving diners with memories to savor long after the last bite has been taken. So, embark on this gastronomic journey and let your taste buds be your guide to the rich and diverse world of Western cuisine.。
五子棋特长班设想英语作文
五子棋特长班设想英语作文英文回答：In recent years, Go and chess have become increasingly popular, and the number of people learning thesetraditional board games has soared. As a result, various training institutions and special classes have emerged to meet the growing demand for professional instruction and skill development in these games. To capitalize on this trend and cater to the ever-growing interest in Go and chess, I propose the establishment of a specialized Go and chess academy that offers a comprehensive curriculum for students of all ages and skill levels.The proposed academy will provide a holistic approach to Go and chess education, encompassing both theoretical knowledge and practical application. The curriculum will be designed to cater to the diverse needs of students, from beginners who are eager to grasp the basics of the game to advanced players seeking to enhance their strategicthinking and tactical prowess.One of the key features of the academy will be its focus on individualized instruction. Each student will receive personalized guidance from experienced andqualified instructors who will tailor their teaching methods to the student's unique learning style and pace. This approach will ensure that all students, regardless of their prior experience or skill level, can maximize their potential and achieve their learning goals.In addition to individualized instruction, the academy will offer a variety of group classes and workshops that provide opportunities for students to interact with peers, engage in friendly competition, and hone their skills in a collaborative environment. These group sessions will foster a sense of community among students and create a supportive and stimulating learning atmosphere.The academy will also place great emphasis on tournament participation as a means of practicalapplication and skill development. Students will have theopportunity to participate in local, regional, and national tournaments, where they can test their abilities against other players and gain valuable experience. Participationin tournaments will not only enhance students' competitive spirit but also provide them with the opportunity to learn from experienced players and refine their strategies based on real-world scenarios.To ensure that students receive the highest quality of instruction, the academy will recruit a team of highly skilled and experienced Go and chess instructors. These instructors will not only possess a deep understanding of the game but also have a proven track record of effectively teaching students of all ages and skill levels. The instructors will be committed to creating a positive and engaging learning environment that fosters students' love for the game and inspires them to achieve their full potential.The proposed Go and chess academy will be located in a convenient and accessible location, making it easily accessible to students from all parts of the city. Theacademy will be equipped with state-of-the-art facilities, including dedicated Go and chess classrooms, a library with a comprehensive collection of Go and chess books and resources, and a tournament hall that can accommodate both small-scale and large-scale events.The academy will be open to students of all ages and skill levels, from young children who are just starting to learn the basics of the game to adults who are looking to improve their skills and pursue competitive play. The academy will offer a variety of class schedules and pricing options to accommodate the diverse needs of students and ensure that everyone has the opportunity to benefit from the exceptional instruction and training provided by the academy.The establishment of a specialized Go and chess academy will not only provide a valuable resource for aspiring Go and chess players but also contribute to the preservation and promotion of these ancient and revered games. By nurturing young talent and providing opportunities for individuals to develop their skills and pursue theirpassion for Go and chess, the academy will play a vitalrole in ensuring the continued growth and popularity of these games for generations to come.中文回答：针对近年来围棋和象棋运动的日益盛行，以及学习围棋和象棋传统棋艺的人数激增的情况，我提议成立专门的围棋和象棋培训学校，为各个年龄段和技能水平的学生提供全面的课程。
围棋俱乐部英文作文带翻译
围棋俱乐部英文作文带翻译英文：As a member of a Go club, I have had the opportunity to experience the benefits of being part of a community of players. The club provides a space for players of alllevels to come together and improve their skills through practice and friendly competition. 。
One of the biggest advantages of being part of a Go club is the opportunity to learn from more experienced players. In our club, we have several members who are high-level players and they are always willing to share their knowledge and experience with others. This has been invaluable for me as I have been able to improve my game significantly by learning from these players.Another benefit of being part of a Go club is thesocial aspect. I have made many friends through the club and we often socialize outside of our regular meetings.It's great to have a group of people who share the same passion and interests as me.In addition, being part of a Go club has helped me to develop important skills such as patience, concentration, and strategic thinking. These skills are not only useful in the game of Go, but also in other areas of my life.Overall, being part of a Go club has been a verypositive experience for me. It has allowed me to improve my skills, make new friends, and develop important life skills.中文：作为围棋俱乐部的一员，我有机会体验到成为一个玩家社区的好处。
我想发明时光门作文300字
我想发明时光门作文300字英文回答：As I embark on this extraordinary journey to create a time portal, I am guided by an unyielding conviction that the boundaries of time and space are not insurmountable. Through meticulous research and collaboration withbrilliant minds, I envision a device that will transcend the limitations of our current understanding and usher in an unprecedented era of human exploration and discovery.The time portal will be a marvel of engineering, incorporating cutting-edge theories in quantum physics, astrophysics, and temporal mechanics. Its design will draw inspiration from visionary concepts such as wormholes, time dilation, and the intricacies of black holes. By harnessing the power of advanced materials and groundbreaking technologies, we will create a gateway that allows for seamless travel through the annals of history and the vast expanse of the future.The implications of this invention are profound. Scientists will be able to study the past firsthand, unlocking the secrets of ancient civilizations and gaining invaluable insights into the origins and evolution of our species. Historians will have the opportunity to witness pivotal events, separating fact from fiction and shedding new light on the tapestry of human experience.Moreover, the time portal will open up endless possibilities for exploration and adventure. Imagine venturing into the era of dinosaurs, witnessing the grandeur of the Roman Empire, or experiencing the wonders of a technologically advanced future firsthand. The boundless depths of time and space will become our playground, empowering us to learn, grow, and shape the destiny of our world.However, with great power comes great responsibility. As we venture into the unknown, we must proceed with wisdom and foresight. We must ensure that the use of the time portal is governed by ethical principles, preventing anymisuse or disruption to the fabric of time.中文回答：我满怀坚定地踏上了创造时光门的非凡旅程，坚信时间和空间的界限并非不可逾越。
Microsemi推出嵌入式应用模块 采用带有ARM Cortex
Microsemi推出嵌入式应用模块采用带有ARM Cortex关键词： Cortex-M3 , uClinux , SmartFusion , cSoC美高森美公司(Microsemi)宣布与基于微控制器的硬件和软件解决方案供应商Emcraft Systems公司合作，为嵌入式应用提供小型化系统级模块(system-on-module，SOM)。
新的SOM产品在小型30mm x 57mm封装内配置了Microsemi SmartFusion可定制系统级芯片(customizable system-on-chip，cSoC)解决方案，以及预载的免权益金uClinux。
双方共同开发的SOM可让产品开发人员减低设计和制造复杂性。
SOM和入门工具套件均正在供货。
美高森美公司市场营销副总裁Paul Ekas称：“采用SmartFusion的Emcraft系统级模块将加速我们客户的产品开发周期，并让客户通过最低功耗解决方案和极小外形尺寸来实现设备差异化。
”Microsemi SmartFusion cSoC在单一芯片上集成了现场可编程逻辑阵列(field programmable logic array，FPGA)、ARM® Cortex™-M3处理器和可编程模拟。
uClinux内核和应用程序在100MHz 32位ARM内核上运行，而集成在SmartFusion的外设、FPGA模块和可编程模拟资源均可用于实施各种通信接口和协议。
Emcraft Systems总经理Kent Meyer表示：“我们合作开发的SOM使得我们能够应对客户不断增长的对于高集成度系统解决方案的需求，这些方案结合了功能丰富的uClinux与Microsemi SmartFusion cSoC提供的设计灵活性和低功耗特性。
客户对小型化SmartFusion SOM具有浓厚的兴趣，我们已经开始向客户付运这款新型解决方案和基板(baseboard)设计文件，以用于下一代嵌入式产品。
我想加入棋社英语作文
我想加入棋社英语作文下载温馨提示:该文档是我店铺精心编制而成，希望大家下载以后，能够帮助大家解决实际的问题。
文档下载后可定制随意修改，请根据实际需要进行相应的调整和使用，谢谢!并且，本店铺为大家提供各种各样类型的实用资料，如教育随笔、日记赏析、句子摘抄、古诗大全、经典美文、话题作文、工作总结、词语解析、文案摘录、其他资料等等，如想了解不同资料格式和写法，敬请关注!Download tips: This document is carefully compiled by theeditor. I hope that after you download them,they can help yousolve practical problems. The document can be customized andmodified after downloading,please adjust and use it according toactual needs, thank you!In addition, our shop provides you with various types ofpractical materials,such as educational essays, diaryappreciation,sentence excerpts,ancient poems,classic articles,topic composition,work summary,word parsing,copyexcerpts,other materials and so on,want to know different data formats andwriting methods,please pay attention!I want to join the chess club。
I have always been fascinated by the game of chess. It is a game that requires strategy, patience, and concentration. I have been playing chess with my friends and family for a while now, but I want to take my skills to the next level. That is why I am interested in joining the chess club at my school.I believe that being a part of the chess club will not only help me improve my skills, but it will also allow me to meet other students who share my passion for the game. I am excited to learn from more experienced players and to challenge myself by playing against them.Furthermore, I think that being a part of the chess club will help me develop important life skills such as critical thinking, decision-making, and problem-solving. These skills will not only benefit me in the game of chessbut also in my academic and personal life.I am looking forward to being a part of a community where I can share my love for the game and learn from others. I am eager to participate in tournaments and events organized by the club and to represent my school in competitions.Overall, I believe that joining the chess club will be a valuable experience for me, both in terms of personal growth and skill development. I am excited to see wherethis journey takes me and to become a better chess player.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Barsoux and Schneider (2003)
Use of Silence
‘He who speaks first at a meeting is a dumb ass’
Issue of Interrupting – Asia and Scandanavia Increased Use of Technology
Miscommunication Attribution User:
Failure of Rhetorical Skills Face PowerPower-Authority Distortion
Relationship
Psychic Distance Parallel Information Networks Group Interactions
NonNon-Verbal Communication
Hall’s ‘Silent Language’ 75% Non-Verbal NonStance: positioning/proxemics Gestures:
Head,Hand,Shoulders Incongruence Greeting - abrazzo Namaste/Wai Handshakes/Feet/ Hand Gestures Kerdon(1984) : Italians remember verbal descriptions if accompanies by gestures – not in UK
The Language Factor (Feeley 2003)
Use of Language by Addressor/Addressee Barneviks view Use of Second Languages Language Barriers First Language User:
CrossCross-Cultural Communication
Basic Models of Communication
Shannon and Weaver (1949) OneOne-Way Communication Model Mead and Jones (2000) TwoTwo-Way Communication Model Links to HPD/LPD Links to Collectivism/Individualism Other contributary factors: nature of task,routine, need for instant action
Corporate Language: Machine Translation
Global Sourcing (Pelesar and Frayer 2000) Need for Expat managers Export development Knowledge Management Post –Merger Integration
Teleconferencing and E-Mails E-
Mead (1998)
HighHigh-Context and LowLow-context cultures ‘Eii Doryuku Shiamasu’ Appropriateness Status of Addressor/Addressee High Context prefer personal meeting Increased Use of Face-toFace-to-Face meetings HighHigh-Context – observation, intuition of needs Value of Effective Listening
Language and Business
Possible Solutions: Expat Managers Selective Recruitment Language Training
Volkswagen 6 x 90
Interpreters:
Costs, Briefings,Loses Rhetorical Power