换磁带

Tapes replacement in HP StorageWorks 1/8 G2 Autoloader
Tape replacement in G2 Autoloader is done by unlocking and removing magazines. After that tapes are replaced in magazines and magazines are put back into the autoloader.
Access to magazines is possible via menu of Autoloader. Access requires administrator password.
1. From the Home screen, press Previous or Next on the panel until the screen displays Operations.
2. Press Enter to select.
3. Press Previous or Next until the screen displays either Unlock Left Magazine or Unlock Right Magazine.
4. Press Enter to select the desired magazine to unlock.
5. The display reads Left Magazine Unlocked or Right Magazine Unlocked.
6. Pull the released magazine out of the device.
7. The screen now displays Insert Left Magazine or Insert Right Magazine. The device cannot perform any other operation until the magazine is back in Autoloader.
8. Replace tapes in a magazine. Tapes should be placed into magazine so that barcode label will be visible.
9. Slide the magazine completely into the device. The magazine locks into place once it is correctly inserted
and the Autoloader inventories the magazine.
在惠普磁带更换StorageWorks G2自动装卸机1/8
在G2磁带更换自动装卸机是通过解锁和删除杂志。

之后磁带取代在杂志和杂志放回自动装卸机。

通过自动装弹机菜单访问杂志是可能的。

访问需要管理员密码。

1。

从主屏幕,按Previous or Next面板,直到屏幕上显示Operations。

2。

按Enter键选择。

3按Previous or Next ,直到屏幕显示Unlock Left Magazine or Unlock Right。

4按回车键选择所需的杂志来解锁。

5。

显示读取左杂志解锁或右杂志解锁。

Left Magazine Unlocked or Right Magazine Unlocked 6。

把杂志发布的设备。

7.现在屏幕上显示插入左杂志或插入右杂志。

该设备无法执行
其他任何操作,直到该杂志在自动装卸机。

Insert Left Magazine or Insert Right Magazine
8。

在一本杂志取代磁带。

磁带应该放在杂志这条形码标签是可见的。

9。

该杂志完全陷入。

该杂志锁到位一旦正确插入
和自动装卸机库存的杂志。

精品文档资料，适用于企业管理从业者，供大家参考，提高大家的办公效率。

精品文档资料，适用于企业管理从业者，供大家参考，提高大家的办公效率。