XTS3000 Basic Service Manual XTS3000 基本用途说明书(英文版)

合集下载

CS3000CENTUMCS3000系统的介绍

CS3000CENTUMCS3000系统的介绍

R2:
•现场总线的解决方案
•现场总线设备管理
•OPC接口

综合型DCS系统
开 “右放击的”网菜R络单3状操.0态作2监功测能
Jan.’03
R3.03:
Sep.’03
R1:

•Windows NT
•DDE
•广域网络的采用
R2
标准 PC 键盘操作功能改
进 的R, 功3.定 能01义 键标相准对M应PaCy的机.’0操键1 作J盘an功上.’02
Vnet/IP网络结构
HIS
ENG
PRM
Exaopc
FCS
CS3000 on Vnet CS CS 1000 Field network
ISD-MASP-S04020 Copyright © Yokogawa Electric Corporation September 9, 2004
SIOS
OPC Server
100 50
FRANCE (200)
50
50
SLOVAKIA/CZECH(73) UK(68)
IRELAND(3)
50
ROMANIA(8)
RUSSIA(159)
PORTUGAL(5) UKRAINE(5) CROATIA(3)
NORTH ASIA
10,039
JAPAN
1,000 100
CHINA (1413)
•而且该数据是不包括I/O点数的
ISD-MASP-S04020 Copyright © Yokogawa Electric Corporation September 9, 2004
Page.10
Domain Integration

改性CENTUM CS3000维护手册

改性CENTUM CS3000维护手册

分子筛改性催化剂CENTUM CS3000系统维护手册计算机应用研究所2006年7月一、系统简介日本横河(YOKOGAWA)公司在推出了CENTUM,CENTUM-V,CENTUM-XL 中大型集散控制系统和相应的YEWPACK,uxL等小系统后,又推出了新一代的集散控制系统CENTUM CS,CENTUM CS 1000,CENTUM CS 3000系列。

其中CENTUM CS 1000面向中、小型过程对象,CENTUM CS 3000面向中、大型过程对象,这些系统把生产过程的控制和管理,设备管理,环境管理和与企业有关的所有信息的管理综合起来,使整个工厂的信息能被充分利用,从而实现了无停顿的连续控制,使整个系统的寿命增加,成本下降,质量和产量提高,因此CS系统是综合生产支援系统。

CS是Concentral Solutions的缩写,表示综合解决,一体化解决,CS也可认为是Customers Satisfaction的缩写,即客户的满足,改性DCS是分子筛车间应用的第二套DCS,因改性装置控制点较多,并要预留两个焙烧炉控制的容量,因而本系统选用CS 3000。

其结构简图如下:其中:HIS:Human interface station,人机接口站FCS:Process field control station,现场控制站,我们采用的是主模件冗余的方式。

Vlnet:V网,是CS 3000的通信系统,系统有两路通讯总线,BUS1为V网(横河专用控制网),BUS2为V网加以太网。

地址域号系统最多可以管理100万个工位号,64个站;HIS通过Ether net 与上位计算机相连,使系统能和数据管理系统进行通讯,达到开放的目的。

Vlnet通常采用双重化方式,通信速率为10Mbps,以同轴电缆传输,最远可达185m,以光缆传输则可达20Km,系统可通过BCV(BUS CONVERTER:总线转换器)与另外的系统(称为域)相连。

Motorola 3.5 kHz 产品说明书

Motorola 3.5 kHz 产品说明书

RVN4126 3.59100-386-9100-386/T DEVICERVN41772-CD2-3.5MCS/MTSRVN41821-CD2-3.5XTS3000/SABER PORTABLE YES RKN4046KHVN9085 3.51-20 R NO HLN9359 PROG. STAND RVN4057 3.532 X 8 CODEPLUG NO3080385B23 & 5880385B30 MDVN4965 3.59100-WS/T CONFIG KITRVN4053 3.5ASTRO DIGITAL INTERFACE NO3080385B23RVN41842-CD RKN4046A (Portable) 2-3.5ASTRO PORTABLE /MOBILE YES3080369B73 or0180300B10 (Mobile) RVN41831-CD3080369B732-3.5ASTRO SPECTRA MOBILE YES(Low / Mid Power)0180300B10 (High Power) RVN4185CD ASTRO SPECTRA PLUS MOBILE NO MANY OPTIONS; SEESERVICE BRIEF#SB-MO-0101RVN4186CD ASTRO SPECTRA PLUS MANY OPTIONS;MOBILE/PORTABLE COMB SEE SERVICE BRIEF#SB-MO-0101RVN4154 3.5ASTROTAC 3000 COMPAR.3080385B23RVN5003 3.5ASTROTAC COMPARATORS NO3080399E31 Adpt.5880385B34RVN4083 3.5BSC II NO FKN5836ARVN4171 3.5C200RVN4029 3.5CENTRACOM SERIES II NO VARIOUS-SEE MANUAL6881121E49RVN4112 3.5COMMAND PLUS NORVN4149 3.5COMTEGRA YES3082056X02HVN6053CD CT250, 450, 450LS YES AAPMKN4004RVN4079 3.5DESKTRAC CONVENTIONAL YES3080070N01RVN4093 3.5DESKTRAC TRUNKED YES3080070N01RVN4091 3.5DGT 9000 DESKSET YES0180358A22RVN4114 3.5GLOBAL POSITIONING SYS.NO RKN4021AHVN8177 3.5GM/GR300/GR500/GR400M10/M120/130YES3080070N01RVN4159 3.5GP60 SERIES YES PMLN4074AHVN9128 3.5GP300 & GP350RVN4152 3.5GP350 AVSRVN4150 3.5GTX YES HKN9857 (Portable)3080070N01(Mobile) HVN9025CD HT CDM/MTX/EX SERIES YES AARKN4083/AARKN4081RiblessAARKN4075RIBLESS NON-USA RKN4074RVN4098H 3.5HT1000/JT1000-VISAR YES3080371E46(VISAR CONV)RVN4151 3.5HT1000 AVSRVN4098 3.5HT1000/ VISAR CONV’L.YES RKN4035B (HT1000) HVN9084 3.5i750YES HLN-9102ARVN4156 3.5LCS/LTS 2000YES HKN9857(Portable)3080070N01(Mobile) RVN4087 3.5LORAN C LOC. RECV’R.NO RKN4021ARVN4135 3.5M100/M200,M110,M400,R100 includesHVN9173,9177,9646,9774YES3080070N01RVN4023 3.5MARATRAC YES3080070N01RVN4019 3.5MAXTRAC CONVENTIONAL YES3080070N01RVN4139 3.5MAXTRAC LS YES3080070N01RVN4043 3.5MAXTRAC TRK DUPLEX YES3080070N01RVN4178CD MC SERIES, MC2000/2500DDN6124AW/DB25 CONNECTORDDN6367AW/DB9 CONNECTOR RVN41751-CD Rib to MIC connector 1-3.5MCS2000 RKN4062BRVN41131-3.5MCS2000RVN4011 3.5MCX1000YES3000056M01RVN4063 3.5MCX1000 MARINE YES3000056M01RVN4117 3.5MDC/RDLAP DEVICESRVN4105 3.5MOBILE PROG. TOOLRVN4119 3.5MOBITEX DEVICESRVN4128 3.5MPT1327-1200 SERIES YES SEE MANUALRVN4025 3.5MSF5000/PURC/ANALOG YES0180355A30RVN4077 3.5MSF5000/10000FLD YES0180355A30RVN4017K 3.5MT 1000YES RTK4205CRVN4148 3.5MTR 2000YES3082056X02RVN4140 3.5MTRI 2000NORVN41761-CD MTS2000, MT2000*, MTX8000, MTX90001-3.5*programmed by DOS which is included in the RVN4176RVN4131 3.5MTVA CODE PLUG FIXRVN4142 3.5MTVA DOCTOR YES3080070N01RVN4131 3.5MTVA3.EXERVN4013 3.5MTX800 & MTX800S YES RTK4205CRVN4097 1-CD MTX8000/MTX9000,MTS2000,MT2000*,* programmed by DOS which is included in the RVN4176HVN9067CD MTX850/MTX8250MTX950,MTX925RVN4138 3.5MTX-LS YES RKN4035DRVN4035 3.5MX 1000YES RTK4203CRVN4073 3.5MX 800YES RKN4006BHVN9395 P100, P200 LB, P50+, P210, P500, PR3000RVN4134 3.5P100 (HVN9175)P200 LB (HVN9794)P50+ (HVN9395)P210 (HVN9763)P500 (HVN9941)PR3000 (HVN9586)YES RTK4205HVN9852 3.5P110YES HKN9755A/REX1143 HVN9262 3.5P200 UHF/VHF YES RTK4205RVN4129 3.5PDT220YVN4051 3.5PORTABLE REPEATER Portable rptr.P1820/P1821AXRVN4061C 3.5PP 1000/500NO3080385B23 & 5880385B30 RVN5002 3.5QUANTAR/QUANTRO NO3O80369E31RVN4135 3.5R100 (HVN9177)M100/M200/M110/M400YES0180358A52RVN4146 3.5RPM500/660RVN4002 3.5SABER YES RTK4203CRVN4131 3.5SETTLET.EXEHVN9007 3.5SM50 & SM120YESRVN4039 3.5SMART STATUS YES FKN5825AHVN9054 3.5SOFTWARE R03.2 P1225YES3080070N01HVN9001 3.5SOFTWARE R05.00.00 1225LS YES HLN9359AHVN9012 3.5SP50RVN4001N 3.5SPECTRA YES3080369B73 (STANDARD)0180300B10 (HIGH POWER) RVN4099 3.5SPECTRA RAILROAD YES3080369B73RVN4110 3.5STATION ACCESS MODULE NO3080369E31RVN4089A 3.5STX TRANSIT YES0180357A54RVN4051 3.5SYSTEMS SABER YES RTK4203BRVN4075 3.5T5600/T5620 SERIES NO3080385B23HVN9060CD TC3000, TS3000, TR3000RVN4123 3.5VISAR PRIVACY PLUS YES3080371E46FVN4333 3.5VRM 100 TOOLBOX FKN4486A CABLE &ADAPTORRVN4133 3.5VRM 500/600/650/850NORVN4181CD XTS 2500/5000 PORTABLES RKN4105A/RKN4106A RVN41002- 3.5XTS3000 ASTRO PORTABLE/MOBILERVN4170 3.5XTS3500YES RKN4035DRIB SET UPRLN4008E RADIO INTERFACE BOX (RIB)0180357A57RIB AC POWER PACK 120V0180358A56RIB AC POWER PACK 220V3080369B71IBM TO RIB CABLE (25 PIN) (USE WITH XT & PS2)3080369B72IBM TO RIB CABLE (9 PIN)RLN443825 PIN (F) TO 9 PIN (M) ADAPTOR (USE W/3080369B72 FOR AT APPLICATION) 5880385B308 PIN MODULAR TO 25 PIN ”D” ADAPTOR (FOR T5600 ONLY)0180359A29DUPLEX ADAPTOR (MOSTAR/TRAXAR TRNK’D ONLY)Item Disk Radio RIB Cable Number Size Product Required Number Item Disk Radio RIB Cable Number Size Product Required NumberUtilizing your personal computer, Radio Service Software (RSS)/Customer Programming Software (CPS)/CustomerConfiguration Software (CCS) enables you to add or reprogram features/parameters as your requirements change. RSS/CPS/CCS is compatible with IBM XT, AT, PS/2 models 30, 50, 60 and 80.Requires 640K RAM. DOS 3.1 or later. Consult the RSS users guide for the computer configuration and DOS requirements. (ForHT1000, MT/MTS2000, MTX838/8000/9000, Visar and some newer products —IBM model 386, 4 MEG RAM and DOS 5.0 or higher are recommended.) A Radio Interface Box (RIB) may be required as well as the appropriate cables. The RIB and cables must be ordered separately.Licensing:A license is required before a software (RVN) order is placed. The software license is site specific (customer number and ultimate destination tag). All sites/locations must purchase their own software.Be sure to place subsequent orders using the original customer number and ship-to-tag or other licensed sites; ordering software without a licensed customer number and ultimate tag may result in unnecessary delays. To obtain a no charge license agreement kit, order RPX4719. To place an order in the U.S. call 1-800-422-4210. Outside the U.S., FAX 847-576-3023.Subscription Program:The purchase of Radio ServiceSoftware/Customer Programming/Customer ConfigurationSoftware (RVN & HVN kits) entitles the buyer/subscriber to three years of free upgrades. At the end of these three years, the sub-scriber must purchase the same Radio Service Software kit to receive an additional three years of free upgrades. If the sub-scriber does not elect to purchase the same Radio Service Software kit, no upgrades will be sent. Annually a subscription status report is mailed to inform subscribers of the RSS/CPS/CCS items on our database and their expiration dates.Notes:1)A subscription service is offered on “RVN”-Radio Service Software/Customer Programming/Customer Configuration Software kits only.2)“RVN” software must only be procured through Radio Products and Services Division (RPSD). Software not procured through the RPSD will not be recorded on the subscription database; upgrades will not be mailed.3)Upgrades are mailed to the original buyer (customer number & ultimate tag).4)SP software is available through the radio product groups.The Motorola General Radio Service Software Agreement is now available on Motorola Online. If you need assistance please feel free to submit a “Contact Us” or call 800-422-4210.SMART RIB SET UPRLN1015D SMART RIB0180302E27 AC POWER PACK 120V 2580373E86 AC POWER PACK 220V3080390B49SMARTRIB CABLE (9 PIN (F) TO 9 PIN (M) (USE WITH AT)3080390B48SMARTRIB CABLE (25 PIN (F) TO 9 PIN (M) (USE WITH XT)RLN4488ASMART RIB BATTERY PACKWIRELESS DATA GROUP PRODUTS SOFTWARERVN4126 3.59100-386/9100T DEVICES MDVN4965 3.59100-WS/T CONFIG’TN RVN41173.5MDC/RDLAP DEVICESPAGING PRODUCTS MANUALS6881011B54 3.5ADVISOR6881029B90 3.5ADVISOR ELITE 6881023B20 3.5ADVISOR GOLD 6881020B35 3.5ADVISOR PRO FLX 6881032B30 3.5BR8506881032B30 3.5LS3506881032B30 3.5LS5506881032B30 3.5LS7506881033B10 3.5LS9506881035B20 3.5MINITOR III8262947A15 3.5PAGEWRITER 20008262947A15 3.5PAGEWRITER 2000X 6881028B10 3.5TALKABOUT T3406881029B35 3.5TIMEPORT P7308262947A15 3.5TIMEPORT P930NLN3548BUNIVERSAL INTERFACE KITItem Disk Radio NumberSize Product。

MC3000培训手册 IT

MC3000培训手册 IT
Obtain an IP address via DHCP Specify an IP Address IP Address Subnet Mask 服务器自动分配IP地址 自定义IP地址 输入IP地址 输入子网掩码
Default Gateway
输入默认网关
输入完毕后,按对话框右上角的OK退出
MC3000基本操作-VT220应用程序使用

若用户名和登录密码正确,手持终端将登录服务器。
MC3000基本操作-VT220应用程序参数设置

• • • • • • • 热启动手持终端,开启VT220应用程序。 单击TOOLS ----〉Configuration,出现Preference settings界面。 Default Telnet host:默认telnet服务器地址输入 Default Telnet Ports: 默认telnet服务器端口输入 Terminal Font Size:设置字体大小 Full Screen Display:全屏显示 Auto Start on System Wakeup:自动唤醒系统 Auto Connect to Default Host on Startup:自动链接到默认服务器
S键和N键——默认为字母键,当按下FUNC键后可调 整屏幕对比度,FUNC+S为对比度变浅,FUNC+N为对
比度变深。
MC3000基本操作-键盘操作
•MC3000热启动操作 •数字键7+数字键9+<PWR> 。热启将重启系统, 但 不清除 RAM上的数据,不会丢失系统设置(网络 特性、加密方式、日期时间等)。打开的或未存盘 的文档信息将会丢失。 •MC3000冷启动操作 •数字键1+数字键9+<PWR> 。若热重启不能解决 系统故障, 则进行冷重启。冷重启将重启系统, 同时 清除 RAM上的数据。所有系统设置(网络特性、 加密方式、日期时间等)及打开的或未打开的、存 盘的或未存盘的文档信息都将丢失。由于IETAN在 交货前就已经把这些设置都固定了,所以冷启动也 不会丢失网络设置。

Braun ThermoScan Pro 3000 Service Manual

Braun ThermoScan Pro 3000 Service Manual
Refer to the Pro 3000 Operator’s Manual for warranty information.
The information and specifications contained within this service manual are subject to change without notification.
CHAPTER 3
PREVENTIVE MAINTENANCE ......................................................................3-1
3.1 INTRODUCTION..........................................................................................................................3-1 3.2 CLEANING.................................................................................................................................3-1
One Second Ear Thermometer
Model: PRO 3000
Service Manual
Part Number 501671A
This document contains propriety information of Braun ThermoScan, and its receipt or possession does not convey any rights to reproduce its contents, or to manufacture or sell any product described. Reproduction, disclosure, or use other than for the intended purpose without specific written authorization of Braun ThermoScan is strictly forbidden.

富士通移动存储 SX-3000 独立媒体模块和 便携型 企业级存储系统 用户手册说明书

富士通移动存储 SX-3000 独立媒体模块和 便携型 企业级存储系统 用户手册说明书

SX-3000独立媒体模块和便携型/企业级存储系统用户手册SMS版本 9.02015年4月20日目录目录1. 前言 (9)1.1. 关于本手册 (10)1.2.安全说明 (11)1.2.1. 一般安全说明 (11)1.2.2.电气安全 (11)2. SMS (12)2.1. 关于SMS 界面 (12)2.2.访问 SMS 界面 (12)2.3. 了解SMS 界面 (13)2.3.1.主菜单 (13)2.3.2. 放映表菜单 (15)2.3.3.排程菜单 (18)2.3.4.配置菜单 (19)2.3.4.1.一般选项 (19)2.3.4.2.字幕功能 (22)2.3.4.3.遥控支援 (23)2.3.4.4. 音频选项 (24)2.3.4.5. 隐藏式字幕选项 (25)2.3.4.6. 流媒体选项 (26)2.3.4.7IMB 网络选项卡 (27)2.3.4.8 IMB 存储选项卡 (29)2.3.5.SNMP配置 (30)2.3.5.1.简介 (30)2.3.5.2.访问 SNMP配置界面 (30)2.3.5.3.了解 SNMP配置界面 (32)2.3.5.3.1.一般选项 (32)2.3.5.3.2.存储 (33)2.3.5.3.3.视频卡 (34)-2-SX-3000独立媒体模块和便携型/企业级存储系统2015年4月20日目录SX-3000独立媒体模块和便携型/企业级存储系统2015年4月20日-3 -2.3.5.3.4. PCI ....................................................................................................................................................... 35 2.3.5.3.5. 传感器 ................................................................................................................................................ 36 2.3.5.3.6. 以太网 ................................................................................................................................................ 37 2.3.5.3.7. 重启/存储/取消 ................................................................................................................................. 38 2.3.6. 自动化 ...................................................................................................................................................... 39 2.4. 节目播放列表 ................................................................................................................................ 47 2.4.1. 创建节目播放列表 .................................................................................................................................. 47 2.4.1.1. 访问播放列表菜单 ............................................................................................................................... 47 2.4.1.2. 创建播放列表 ....................................................................................................................................... 48 2.4.1.3. 编辑线索 ............................................................................................................................................... 49 2.4.1.4. 保存播放列表 ..................................................................................................................................... 54 2.5. 放映时间表 ................................................................................................................................... 55 2.5.1. 编排放映时间表 ...................................................................................................................................... 55 2.6.同步节目........................................................................................................................................ 61 2.6.1. 同步剪辑以进行 3D 放映 (MPEG2)......................................................................................................... 61 2.7.服务器配置 .................................................................................................................................... 63 2.7.1.CineCanvas™ 和 CineLink™ 配置 ............................................................................................................... 63 2.7.2.杜比 3D 设置 ............................................................................................................................................. 67 2.8.第二代 DLPCINEMA ®放映机设置 .................................................................................................. 69 2.8.1.自动化设置 ............................................................................................................................................... 69 2.8.2.字幕渲染 ................................................................................................................................................... 71 2.8.2.1. 字幕渲染设置 ..................................................................................................................................... 71 2.8.2.2. 字幕语言选择 ..................................................................................................................................... 71 2.8.3.第二代放映机支持CineCanvas TM ............................................................................................................ 75 2.9.关机/重启应用程序......................................................................................................................... 76 2.9.1.关机或重启 .. (76)3.控制面板 (77)3.1.关于控制面板................................................................................................................................. 77 3.2.控制面板菜单 ................................................................................................................................. 78 3.3.自动化执行菜单 .. (79)目录3.4.重启控制面板 (81)3.5.关闭系统 (82)4.内容管理 (83)4.1. 关于内容管理 (83)4.1.1.简介 (83)4.1.2.访问内容管理 (83)4.2.内容管理 (84)4.2.1.载入内容 (84)4.2.2.从USB 磁盘载入内容 (86)4.2.3.载入 KDMs(密钥) (88)4.2.4.监控载入进度 (89)4.2.5.取消载入 (90)4.2.6.删除内容 (91)4.2.7.检查内容完整性 (92)4.3密钥管理 (97)4.3.1.管理密钥( KDM) (97)4.4.节目源管理 (98)4.4.1.添加节目源 (98)4.4.2.删除节目源 (101)4.4.3.编辑节目源 (102)5.管理面板 (104)5.1.简介 (104)5.2.用户界面 (UI) (105)5.2.1.简介 (105)5.2.2.访问管理面板 (105)5.2.2.1.通过控制面板访问 (105)5.2.2.2. 进入Admin Panel 按钮 (106)5.2.2.3.主菜单 (107)5.3.配置和维护 (109)5.3.1.存储系统管理 (109)-4-SX-3000独立媒体模块和便携型/企业级存储系统2015年4月20日目录SX-3000独立媒体模块和便携型/企业级存储系统2015年4月20日-5 -5.3.1.1. 创建新的 RAID 阵列.......................................................................................................................... 109 5.3.1.2. 监控 RAID 状态 ................................................................................................................................... 113 5.3.1.3. 硬盘信息 ............................................................................................................................................. 114 5.3.1.4. 磁盘使用情况 ..................................................................................................................................... 116 5.3.1.5. 存储性能 ............................................................................................................................................. 117 5.3.1.6. 提高重建速度 ..................................................................................................................................... 118 5.3.2.诊断 /维护 ............................................................................................................................................... 119 5.3.2.1. 访问诊断/维护 .................................................................................................................................... 119 5.3.2.2. 提取日志和配置 ................................................................................................................................. 120 5.3.2.3. 备份配置 ........................................................................................................................................... 121 5.3.2.4. 恢复配置 ............................................................................................................................................. 122 5.3.2.5. 设置时区 ............................................................................................................................................. 124 5.3.2.6. 软件升级 ........................................................................................................................................... 125 5.3.3.系统信息 ................................................................................................................................................. 127 5.3.3.1. 访问系统信息 ................................................................................................................................... 127 5.3.3.2.软件/操作系统版本 ............................................................................................................................ 128 5.3.3.3.硬件信息 .............................................................................................................................................. 129 5.3.3.4.补丁信息 .............................................................................................................................................. 130 5.3.4.触控屏 ..................................................................................................................................................... 131 5.3.4.1. 访问触控屏 ....................................................................................................................................... 131 5.3.4.2. 选择触控屏类型 ................................................................................................................................. 132 5.3.4.3. 校准触摸屏 ......................................................................................................................................... 134 5.4.用户管理...................................................................................................................................... 135 5.4.1.访问用户管理 ......................................................................................................................................... 135 5.4.2.添加/编辑用户........................................................................................................................................ 135 5.4.3 删除用户 ................................................................................................................................................. 137 5.4.4.更改当前用户密码 ................................................................................................................................. 139 5.5. DCI 功能 ..................................................................................................................................... 140 5.5.1. 访问DCI 功能 ......................................................................................................................................... 140 5.5.2. 微调时钟校准 . (141)目录5.5.3. 获取 SM(安全管理)日志 (142)5.6.退出/关机 (143)6. IMB操作注意事项 (145)6.1. 开机顺序 (145)6.2. 关机顺序 (145)-6-SX-3000独立媒体模块和便携型/企业级存储系统2015年4月20日感谢您购买环球数码创意科技有限公司的SX-3000 独立媒体模块和便携型 /企业级存储系统。

dash3000简易中文操作手册

dash3000简易中文操作手册

DASH 3000监护仪操作简章打开电源,机器自检(每次开机后都应是Discharge状态,如不是,必须马上做一遍出/入院处理)。

联接好病人的导联。

在主菜单(MORE MENUS)中,最后一项(ADMIT MENU)点击下,选择ADMIT PATIENT,点击一下进入入院状态。

如某参数报警线值不合适,将其调整到合适位置。

选择设置病人自动血压测量,见NBP菜单。

监护完毕,取下导联,在主菜单中,选择(ADMIT MENU)点击一下,选择DISCHARGE PATIENT,清理内存,并到出院状态,关闭电源。

二、功能键简介(一)Trim Knob键旋转Trim Knob键,屏幕上被选定的内容为高亮;按下Trim Knob键,即完成操作。

(二)控制键在主机面板右方,共有五个控制键:POWER: 电源开/关GRAPH GO/STOP: 手动打印开/关NBP GO/STOP:无创血压手动测量开/关FUNCTION:有创(介入)压置零SLIENCE ALARMS:报警静音三、菜单中英文对照(因所选机型配置不同,有些子菜单内容不同)。

在监护状态下,我们可以进入监护仪的主菜单,利用Trim Knob键对系统进行设置。

主菜单退出报警控制观看其他病情数据病情数据系统设置进入菜单电池状态A) ALARM CONTROL的子菜单为:• ALL LIMI TS:所有报警界限• ARRHYTHMIA ALHRM LEVEL:心律失常报警界级别• PARAMETER ALARM LEVEL:参数报警级别• ALARM HELP:报警帮助/模拟• DISPLAY OFF ALARM PAUSE:关闭显示,暂停报警• ALARM VOL:报警音量• CLEAR ALAMS:清除报警• ALARM HISTORY:报警事件回顾B) VIEW OTHER PATIENTS在连网中,可以观察别的床位病情资料• VIEW ON ALARM OPTIONS:查看报警开/关•GRAPH VIEWED BED:打印查看的床位•SELECT A BED TO VIEW:选看网络中其他床位• SELECT ANOTHER CARE UNIT:选择网络中其它科室PATIENT DATA的子菜单为:• ALARM HISTORY :报警历史• VITAL SIGNS:生命体征回顾• GRAPHIC T RENDS:趋势图• CARDIAC CALCS:心功指数计算• PULMCNARY CALCS:肺功指数计算• DOSE CALCS :药物计量计算• LAB DATA:由此进入医院实验室数据信息管理系统(LIS),查看病人相关实验室数据。

Basic chinesisch NCS 3000

Basic chinesisch NCS 3000

Basic guideline for TiO2 centrifuge NCS 3000 operationTIO2离心机NCS 3000操作基本方针Automatic operation:自动化Manual dispersing operation:手动离心作业If automatic fails: Check for disturbance (open dilution-valve, check dilution flow 320 – 370 l/h etc.) and prepare centrifuge for further operation:若自动离心出现故障的话,就检查故障(打开稀释阀,检查稀释流量320-370 l/h 等),并准备离心。

Remarks- K1 = Control On/Off 启动/停止- K2 = Inspection lamp On/Off 检查灯亮/熄灭- K3 = Cycle Automatic / Manual 自动/手动循环- K4 = Cycle Start开始循环- K5 = Classifying分离大小颗粒- K6 = Dispersing Automatic / Manual自动/手动离心- K7 = Dispersing离心- K8 = Discharging排料- K9 = Manual Operation STOP 手动停止操作- K10 =Fault indicator 故障提示Classifying stage分离阶段In the classifying stage suspension is continuously supplied as soon as the working speed is reached. The feed pump is controlled by our PLC. The suspension is feed through the shaft of the dispersing unit to the bottom of the rotor. The suspension is then pressed against the wall of the rotor by the centrifugal force and flows through the individual rotor chambers. The coarse particles in the suspension are deposited on the rotor wall. The portion of the suspension that is suitable for further use is discharged from the upper part of the rotor through the overflow skimming unit.在分离阶段,只要达到运行速度,就连续供应悬浮液。

XTS3000参数说明

XTS3000参数说明

Radio‎Confi‎g urat‎i on(电台配置)Radio‎Wide(电台范围)Gener‎a l(常规)Radio‎Cloni‎n g:选中此项允‎许电台复制‎或被复制。

两台电台之‎间通过一条‎特殊的电缆‎,完成 CodeP‎l ug 的复制。

该过程不需‎要CPS。

CPS 也提供复制‎Codep‎l ug的功‎能,但与此选项‎无关。

Block‎Pendi‎n g CA/PC:选中此项允‎许无人值守‎的电台忽略‎Call Alert‎和 Priva‎t e Call 呼叫。

Maxim‎u m Chann‎e ls:最大信道数‎。

Out of range‎Indic‎a tor:用于指示在‎集群系统中‎的“‎事件,可以选择任‎意的Emerg‎e ncy(紧急)Silen‎t Alarm‎:选中此项电‎台将在紧急‎模式时工作‎在隐蔽模式‎,没有任何声‎音和显示的‎反馈。

Keep Alive‎:选中此项电‎台在紧急模‎式下将会保‎持工作,不管开关的‎处于何种位‎置。

Unmut‎e Optio‎n:Emerg‎e ncy Chann‎e l Selec‎t or Lock:选中此项,电台如果在‎紧急模式工‎作,将会锁定在‎紧急信道上‎。

Chann‎e l Delay‎:选择电台在‎传输紧急模‎式数据前等‎待的时间。

Man Down Pre-Alert‎:此两项都是‎关于人员意‎外跌倒时报‎警的,没有相关配‎件时此两项‎无作用。

Man Down Post-Alert‎:如上。

Alert‎Tones‎(警告音)Alert‎Tone:选中此项允‎许电台发出‎警报音。

Volum‎e Adjus‎t Tone Offse‎t:选中此项将‎警告音量维‎持在一个恒‎定的值。

Power‎-up Self Test Alert‎:选中此项电‎台将在开机‎发出提Zero Level‎Audio‎Mute:选中此项,如果音量旋‎钮在制定的‎值之下,那么电台将‎关闭警告音‎。

TS3000系统培训讲义

TS3000系统培训讲义

TS3000系统培训讲义第⼀部分 TRICON系统概述1.1什么是Tricon?Tricon是⼀种具有⾼容错能⼒的可编程控制器及过程控制技术。

1.1.1 什么是容错技术容错是Tricon控制器最重要的特性,它可以在线识别瞬态和稳态的故障并进⾏适当的修正。

容错技术提⾼了控制器的安全能⼒和可⽤性,使过程得到控制。

Tricon通过三重模件冗余结构(TMR)提供容错能⼒。

此系统由三个安全相同的系统通道组成(电源模件除外,该模件是双重冗余的)。

每个系统通道独⽴地执⾏控制程序,并与其它两个通道并⾏⼯作。

硬件表决机制则对所有来⾃现场的数字式输⼊和输出进⾏表决和诊断。

模拟输⼊则进⾏取中值的处理。

因为每⼀个分电路都是和其它两个隔离的,任⼀分电路内的任何⼀个故障都不会传递给其它两个分电路。

维修⼯作,包括拆卸和更换有分电路故障的故障模件都可以在线情况下进⾏,⽽不中断过程控制。

(在有热备卡件的情况下,并确认热备卡件处于⼯作状态,⽅可进⾏。

)对于各个分电路、各模件和各功能电路⼴泛的诊断⼯作能够及时地探查到运⾏中的故障,并进⾏指⽰或报警。

诊断还可以把有关故障的信息存储在系统变量内。

在发现有故障时,操作员可以利⽤诊断信息以修改控制动作,或者指导其维护过程。

从⽤户的观点看,使⽤是简单的,因为此三重系统⼯作起来和⼀个控制系统⼀样。

⽤户将传感器或执⾏机构连接到⼀路接线端上,并且应⽤⼀组逻辑为Tricon编程。

其余的事都由Tricon⾃⾏管理。

1.1.2 Tricon系统的特点为了保证在任何时候系统都有最⾼的完整性,Tricon有如下特点:—提供三重模件冗余结构,三个完全相同的分电路各⾃独⽴地执⾏控制程序。

—能耐受严酷的⼯业环境。

—能够现场安装,可以现场在线地进⾏模件级的安装和修复⼯作⽽不需打乱现场接线。

—能⽀持多达118个I/O模件(模拟的和数字的)和选装的通讯模件,通讯模件可以与Modbus主机和从属机连接,或者和Foxboro与Honeywell分布控制系统(DCS)、其它在Peer-to-Peer⽹络内的各个Tricon、以及在TCP/IP⽹络上的外部主机相连接。

欧昊斯 3000 系列底座 说明书

欧昊斯 3000 系列底座 说明书

Defender™ 3000 Series Base Instruction ManualComplianceThis product conforms to the EMC directive 89/336/EEC and the Low Voltage Directive 73/23/EEC. Thecomplete declaration of Conformity is available from Ohaus CorporationDisposalI n conformance with the European Directive 2002/96 EC on Waste Electrical and Electronic Equipment(WEEE) this device may not be disposed of in domestic waste. This also applies to countries outside theEU, per their specific requirements.Please dispose of this product in accordance with local regulations at the collecting point specified forelectrical and electronic equipment.If you have any questions, please contact the responsible authority or the distributor from which youpurchased this device.Should this device be passed on to other parties (for private or professional use), the content of thisregulation must also be related.Thank you for your contribution to environmental protection.ISO 9001 RegistrationIn 1994, Ohaus Corporation, USA, was awarded a certificate of registration to ISO 9001 by Bureau Veritus Quality International (BVQI), confirming that the Ohaus quality management system is compliant with the ISO 9001 standard’s requirements. On May 15, 2003, Ohaus Corporation, USA, was re-registered to the ISO 9001:2000 standard.INTRODUCTIONThis manual covers installation, and maintenance instructions for the Ohaus Defender 3000 Series Base. Please read this manual completely before installation and operation.TMSAFETY PRECAUTIONSFor safe and dependable operation of this product, please comply with the following precautions:• Operate the base only under ambient conditions specified in these instructions • Ensure that the load cell cable does not pose an obstruction or tripping hazard • Do not operate the base in hazardous environments or unstable locations • Do not drop loads on the base• Do not lift the base by the top frame; always lift from the bottom frame when moving the base • Service should only be performed by authorized personnelINSTALLATIONUnpackingUnpack and inspect the product to make sure that all components have been included. The package includes the following:• Base • Weighing Pan • Warranty Card • Instruction ManualWhen purchased as a complete Defender 3000 Series Scale, will also include:• 3000 Series Indicator • Column AssemblyAssemblyWeighing PanPlace the weighing pan securely over the rubber load pads on the top frame of the base.Wiring ConnectionsConnect the load cell cable to an indicator using the wiring codes in Table 1 below. Refer to the indicator manual for information about load cell connections, setup and calibration.Note : When purchased as a Defender Series Scale, the base is already pre-wired to the 3000 Series Indicator.TABLE 1. SIX WIRE LOAD CELL CONNECTION.FUNCTION WIRE COLOR + Excitation Green - Excitation Black + Signal Red - Signal White + Sense Blue - Sense Brown Shield YellowSelecting the LocationTo ensure accuracy, proper performance and safety, locate and operate the base on a stable, level surface. Avoid locations withrapid temperature changes or excessive dust, air currents, vibrations, electromagnetic fields or heat.Level the base by adjusting the four leveling feet until the bubble in the level indicator (located at the rear of the base) is centered. A wrench may be needed to loosen the locking nut above each leveling foot. When the base is level, retighten the locking nuts up against the base to lock each foot into place.Note: Ensure that the base is level each time its location is changed.MAINTENANCECleaningThe base components should be kept clean and free of excessive material build up.•Damp cloth with water and a mild detergent may be used to wipe clean the external surfaces—do not use acids,alkalis, strong solvents or abrasive materials and chemicalsTroubleshootingAside from installing components and leveling adjustments, the Defender Series Base does not require any other adjustments asshipped from the factory.Operational difficulties that may be encountered can often be traced to simple causes such as:•Loose or incorrect wiring connections•Obstructions to the base frame•Unstable environments•Incorrect calibration or setup of the indicatorIf the troubleshooting section does not resolve or describe your problem, contact your authorized Ohaus service agent. Forservice assistance or technical support in the United States call toll-free 1-800-526-0659 between 8:00 AM and 5:00 PM EST.An Ohaus product service specialist will be available to provide assistance. Outside the USA, please visit our web site, to locate the Ohaus office nearest you.TECHNICAL DATATechnical SpecificationsThe technical data is valid under the following ambient conditions:Ambient temperature: -10ºC to +40 ºCRelative humidity: 10% to 90% relative humidity, non-condensingHeight above sea level: Up to 4,000mOperability is assured at ambient temperature -10ºC to +40 ºCTABLE 2a. SPECIFICATIONSD150BXD300BXD150BLD60BLMODEL D30BRD60BRCapacity 30 kg 60 kg 60 kg 150 kg 150 kg 300 kgResolution 6000d 6000d 6000d 7500d 7500d 6000dMaximumPan Dimensions 305 x 355 x 75 mm 420 x 550 x 80 mm 500 x 650 x 90 mmBase Construction Stainless Steel platform with painted steel frame and rubber leveling feetSafe Overload Capacity 125% of capacityRepeatability (std. deviation) 1dLinearity ±1d Load Cell Cable 2 m L x 6-wire 2.3 m L x 6-wireLoad Cell Type 350 Ohm, aluminum, single pointLoad Cell Excitation 5-15V DC/ACLoad Cell Rated Output 2mV/VLoad Cell Protection IP67Net Weight 9 kg 16 kg 28 kgShipping Weight 11 kg 19 kg 32 kgTABLE 2b. SPECIFICATIONSD150VXD300VXD150VLD60VLMODEL D30VRD60VRCapacity 30 kg 60 kg 60 kg 150 kg 150 kg 300 kgResolution 6000d 6000d 6000d 7500d 7500d 6000dMaximumPan Dimensions 305 x 355 x 75 mm 420 x 550 x 80 mm 500 x 650 x 90 mmBase Construction Stainless Steel platform with stainless steel frame and rubber leveling feetSafe Overload Capacity 125% of capacityRepeatability (std. deviation) 1dLinearity ±1d Load Cell Cable 2 m L x 6-wire 2.3 m L x 6-wireLoad Cell Type 350 Ohm, stainless steel, single pointLoad Cell Excitation 5-15V DC/ACLoad Cell Rated Output 2mV/VLoad Cell Protection IP67Net Weight 9 kg 21 kg 33 kgShipping Weight 11 kg 24 kg 37 kgDrawingsBase shown with 3000 series indicator and columnFigure 1. Defender Base Dimension Drawing.TABLE 3. DIMENSIONS.A B C D EBase Pan Depth Pan WidthHeight of Pan toSurface of Table*Height of Pan Depth Including Level Indicator D30BR, D60BR 355 mm 305 mm 123 mm 75 mm 380 mm D60BL, D150BL 550 mm 420 mm 136 mm 80 mm 575 mm D150BX, D300BX 650 mm 500 mm 143 mm 90 mm 675 mm D30VR, D60VR 355 mm 305 mm 119 mm 75 mm 380 mm D60VL, D150VL550 mm420 mm145 mm80 mm 575 mm D150VX, D300VX 650 mm 500 mm 154 mm 90 mm675 mm*For leveling purposes, the feet may be extended up to an additional 11mm.TABLE 4. ACCESSORIES.Description Part Number Column Kit, 35 cm painted steel 80251743 Column Kit, 70 cm painted steel 80251744 Column Kit, 35 cm stainless steel 80251745 Column Kit, 70 cm stainless steel80251746LIMITED WARRANTYOhaus products are warranted against defects in materials and workmanship from the date of delivery through the duration of the warranty period. During the warranty period Ohaus will repair, or, at its option, replace any component(s) that proves to be defective at no charge, provided that the product is returned, freight prepaid, to Ohaus. This warranty does not apply if the product has been damaged by accident or misuse, exposed to radioactive or corrosive materials, has foreign material penetrating to the inside of the product, or as a result of service or modification by other than Ohaus. In lieu of a properly returned warranty registration card, the warranty period shall begin on the date of shipment to the authorized dealer. No other express or implied warranty is given by Ohaus Corporation. Ohaus Corporation shall not be liable for any consequential damages.As warranty legislation differs from state to state and country to country, please contact Ohaus or your local Ohaus dealer for further details.*80251065*P/N 80251065 B ©2007 Ohaus Corporation, all rights reserved Printed in China。

motorola ASTRO XTS3000维修手册 射频板

motorola ASTRO XTS3000维修手册 射频板

13-1Block Diagrams, Schematics, Electrical Parts Lists, and Circuit Board DetailsTransceiver BoardIntegrated Circuit ModulesU10113-2NLD8892R VHF Transceiver Board Schematic Diagram13-313-4O.K. AS O.K. ASISS.REVISIONCORRECTED ASMARKED ILLUSTRATORDATEENGINEERDATEPROGRAM DISKMEDIA & COMMUNICATIONS DDWG. NO.EDITORDATECHECKERDATEIllustratorAstro VHF RF8405880V08.G/NLD8892RJPMAEPF-27MAEPF-27142-O3/16/01OAMNLD8892RVIEWED FROM SIDE 1MAEPF-27141-O13-5Notes:1.For optimum performance, order replacement diodes, transistors, and circuitmodules by Motorola part number only.2.When ordering crystals, specify carrier frequency, crystal frequency, crystaltype number, and Motorola part number.3.Part value notations:p=10 -12 n=10 -9 µ=10 -6 m=10 -3 k=10 3 M=10 64.ITEM refers to the component reference designator.5.NLE4560K UHF Range 1 Transceiver Board Schematic Diagram 13-613-7NLE4560K UHF Range 1 Transceiver Circuit Board Details and Parts ListNLE4560K UHF Range 1 Transceiver Board Electrical Parts List13-8Notes:1.For optimum performance, order replacement diodes, transistors, and circuitmodules by Motorola part number only.2.When ordering crystals, specify carrier frequency, crystal frequency, crystaltype number, and Motorola part number.3.Part value notations:p=10 -12 n=10 -9 µ=10 -6 m=10 -3 k=10 3 M=10 64.ITEM refers to the component reference designator.5.NLE4244P UHF Range 2 Transceiver Board Schematic Diagram13-913-10NLE4244P UHF Range 2 Transceiver Circuit Board Details and Parts ListNLE4244P UHF Range 2 Transceiver Board Electrical Parts ListNotes:1.For optimum performance, order replacement diodes, transistors, and circuitmodules by Motorola part number only.2.When ordering crystals, specify carrier frequency, crystal frequency, crystaltype number, and Motorola part number.3.Part value notations:p=10 -12 n=10 -9 µ=10 -6 m=10 -3 k=10 3 M=10 64.ITEM refers to the component reference designator.5.NUF6411K 800 MHz Transceiver Board Schematic DiagramNotes:1.For optimum performance, order replacement diodes, transistors, and circuitmodules by Motorola part number only.2.When ordering crystals, specify carrier frequency, crystal frequency, crystaltype number, and Motorola part number.3.Part value notations:p=10 -12 n=10 -9 µ=10 -6 m=10 -3 k=10 3 M=10 64.ITEM refers to the component reference designator.5.。

3000设备入门指南说明书

3000设备入门指南说明书

[分类:受限制]Check Point版权声明©2020Check Point Software Technologies Ltd.保留所有权利。

本产品及相关文档受版权保护,并且凭限制其使用、复制、分发及反编译的许可进行分销。

未经Check Point的事先书面授权,不得对本产品或相关文档的任何部分,以任何形式或任何方式进行复制。

在本手册编制过程中已非常谨慎,但Check Point不对任何错误或疏漏承担责任。

本出版物及其中所述功能如有更改,恕不另行通知。

限制权利图注:政府的使用、复制或纰漏须符合DFARS252.227-7013和FAR52.227-19的“技术数据和计算机软件权利”一条中第(c)(1)(ii)款规定的限制。

商标:参考版权页以获取我们的商标清单。

参考第三方版权声明以获取相关版权和第三方许可的清单。

重要信息最新软件我们建议您安装最新版软件,以获得最新的完善功能、更好的稳定性、更高的安全级别,并防止发展中的新攻击入侵。

认证有关Check Point产品的第三方独立认证,请参见Check Point认证页面。

Check Point3000设备如需更多有关此版本的信息,请参见主页。

此文档的最新版本请打开网页浏览器中此文档的最新版本。

请下载此文档(PDF格式)的最新版本。

反馈Check Point一直在致力于完善其文档。

请发送您的意见给我们,以帮助我们不断改进。

修订历史目录安全和环保声明7合规信息9符合性声明9引言14欢迎14 3000设备概述14装运箱内容物15术语15将3000设备安装于机架16设备物理规格16设备通风口16配置3000设备18启动设备18可用软件映像18初始配置18创建网络对象18高级配置18连接至3000设备CLI19 3000设备硬件20前面板20后面板22在3100/3200设备中安装电源配适器固定夹22双冗余BIOS25更换和升级组件26恢复出厂默认设置27通过Gaia门户进行恢复27通过启动菜单恢复27通过Gaia Clish进行恢复28注册和支持29注册29支持29如何进阶?29安全和环保声明请在设置或使用设备前阅读以下警告。

操作和维护手册

操作和维护手册

Sun StorEdge™ 3000 系列安装、操作和维护手册Sun StorEdge 3120 SCSI Array Sun Microsystems, Inc.文件号码 817-6624-112005 年 7 月,修订版 A请将有关本文档的意见和建议提交至:/hwdocs/feedback版权所有 © 2004-2005 Dot Hill Systems Corporation, 6305 El Camino Real, Carlsbad, California 92009, USA. 保留所有权利。

对于本文档中介绍的产品,Sun Microsystems, Inc. 和 Dot Hill Systems Corporation 对其所涉及的技术拥有相关的知识产权。

需特别指出的是(但不局限于此),这些知识产权可能包含在 /patents 中列出的一项或多项美国专利,以及在美国和其他国家/地区申请的一项或多项其他专利或待批专利。

本文档及其相关产品的使用、复制、分发和反编译均受许可证限制。

未经 Sun 及其许可方(如果有)的事先书面许可,不得以任何形式、任何手段复制本产品或文档的任何部分。

第三方软件,包括字体技术,均已从 Sun 供应商处获得版权和使用许可。

本产品的某些部分可能是从 Berkeley BSD 系统衍生出来的,并获得了加利福尼亚大学的许可。

UNIX 是 X/Open Company, Ltd. 在美国和其他国家/地区独家许可的注册商标。

Sun、Sun Microsystems、Sun 徽标、Sun StorEdge、AnswerBook2、 和 Solaris 是 Sun Microsystems, Inc. 在美国和其他国家/地区的商标或注册商标。

美国政府权利-商业用途。

政府用户应遵循 Sun Microsystems, Inc. 的标准许可协议,以及 FAR(Federal Acquisition Regulations,即“联邦政府采购法规”)的适用条款及其补充条款。

CS3000系统概述

CS3000系统概述

横河CS3000系统概述•企业技术解决方案概念(ETS)•系统概述•系统性能说明1. 企业技术解决方案的概念(ETS)今天,在企业运作中,增加企业效益显得越来越为重要。

用户期望以具有经济效益、综合的自动化方法来满足工厂及装置的专业化需求。

致力于这种观点,横河公司引入了一个新的企业观念——“企业技术解决方案(ETS)”来满足用户要求的企业目标,即•E nterprise:从用户日常生产运行为出发点,努力为用户经营利益作出最大的贡献。

•T echnology:采用最新、最先进的技术,为用户提供先进的信息系统,高级控制,运行支援,现场仪表及控制系统。

•S olutions:充分满足用户的各种需求,为用户提供从设计到服务,完整的最优化的解决方案。

基于ETS理念,横河作了以下的工作:•为工厂构造一个综合生产控制系统;•构造一个涉及工厂运作计划的高层信息管理系统;•提供高级控制和综合生产支援系统;•使各种产品和服务一体化。

CENTUM-CS3000综合生产控制系统正是横河公司为体现ETS概念而开发生产的新一代集散型控制系统(DCS)的代表。

2. 系统概述横河电机1915年成立以来,致力于计测仪表与控制装置的研究开发,始终处于国际仪器仪表领域的领先地位。

1975年推出世界上第一套分散控制系统(DCS):CENTUM,使工业生产过程控制自动化技术产生了一次历史性的飞跃。

自CENTUM系统问世以来,横河DCS 产品以其可靠性高、技术先进、功能强大、人机界面友好等特点而深受世界各地用户的信赖。

当前,随着产业信息技术的飞速发展,以提高综合经济效益为目标的生产及管理综合自动化成为必然趋势。

为此,横河在产品的设计制造、研究开发上提出了面向21世纪的ETS(Enterprise Technology Solution)的系统概念,从工厂的生产运行,综合效益为出发点,充分满足工厂的各种需求,以最先进的技术,最可靠的产品,为用户提供从设计开发到现场服务的完善、优化适用的综合决策方案。

CRS3000 POS机操作指南说明书

CRS3000 POS机操作指南说明书

36
TRANSACTION VOID
36
REFUND
36
# (NON-ADD) KEy
36
TENT # KEy
37
# GUESTS KEy
37
ALPHA TEXT
37
COUPON
37
SUBTOTAL
38
DISCOUNT (-%) SALE & ITEM
38
PRESET % DISCOUNT ON AN ENTIRE SALE
34
ADomo TAX TO AN ITEM
34
EXCEPTil'IG TAX ON AN ENTIRE SALE
34
CORRECTIONS
35
CLEAR
35
ERROR CORRECT
35
VOID
35
(CURSOR VOID) usmo CURSOR UP & CURSOR DoWN
35
CANCEL
84
" "._> "",.,.$ eo, _ " • •
.OQ«" _,I __J
,_•• _, ¥ '!it,
INFORMATION CONTAINED ON ALL "SINGLE REGISTER" REPORTS
86
INFORMATION CONTAINED ON ALL "IRC - STOREWIDE" REPORTS
TRAY SUBTOTAL
40
FOREIGN CURRENCY SUBTOTAL
40
TENDERiPAYMENT

CS3000操作中文手册

CS3000操作中文手册

CS3000中文操作手册CS3000系统简介1.概述日本横河公司的CENTUM CS3000 DCS系统。

装置内所有仪表及安全监测信号全部进入DCS 系统。

CS3000操作平台类似于Windows操作平台,它包括系统控制站和若干人机界面站,以鼠标及键盘操作为主。

2.特点2.1 监控点可以由多个HIS(Human Interface Station)同时操作,每个HIS也可以同时操作多个监控点(可以是不同岗位的多个监控点)。

2.2 CS3000系统的处理能力非常强大,它可以处理100,000tags(工位号)、2,500幅画面(包括各种监控画面),每幅画面上可显示多达400个数据。

2.3 人机界面比较好。

选用Windows NT作为操作系统,采用X—Windows(多画面)技术,类似一般的PC机。

可根据工艺的要求,实现各种友好的控制监测画面。

比如它可以用棒图动态显示液/界位的变化;采用颜色、闪烁、声音等手段提醒操作人员发生过程报警及高低级别;单点操作采用Faceplate(面板)类似于常规仪表的柱状液晶显示,监视及操作较直观。

2.4 CS3000系统具有强大的数据处理能力,足以完成一般生产所需的数据运算、统计要求,并能对生产数据实时打印输出。

2.5 正常生产中可按需求在线修改组态,更好地服务于生产。

二、操作说明1.名词解释:1.1过程报警(Process Alarm):过程报警该钮显亮,点击出现报警信息的窗口。

1.2系统报警(System Alarm):系统报警时,该钮闪亮,点击弹出系统报警信息窗口。

1.3操作员指导信息(Operator Guide Message):有操作员指导信息时,该钮闪亮,点击弹出指导信息窗口。

1.4 登录信息(User In Monitor):设置用户身份。

1.5 窗口调用菜单(Window Call Menu):调用各种画面。

1.6 操作菜单(Operation Menu):相关流程图切换按钮。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
Chapter 5: Recommended Test Equipment and Service Aids
5.1 Recommended Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 5.2 Service Aids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 5.3 Field Programming Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Disclaimer
The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others.
Chapter 3: Overview
3.1 Notations Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 3.2 Radio Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 3.3 FLASHPort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Chapter 6: Performance Checks
6.1 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 6.2 Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Document Copyrights
No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola.
Chapter 2: Model Charts and Test Specifications
2.1 Specifications for VHF Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 2.2 Specifications for UHF Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 2.3 Specifications for 800 MHz Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
6.2.1 Entering Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 6.2.2 RF Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 6.2.3 Control Top and Keypad Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Chapter 7: ALIGNMENT PROCEDURE
7.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 7.2 Reference Oscillator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Trademarks
MOTOROLA and the Stylized M logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.
4.2 Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 4.2.1 XTS 3000 R Radios Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
68P81083C85-A March 2004
Computer Software Copyrights
The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product.
Table of
Contents
Contents







































相关文档
最新文档