FB180SA10

合集下载

FutabaS3010参数说明

FutabaS3010参数说明

Futaba S3010参数说明Futaba S3010参数说明2011-04-13 21:22黑线( 接地) , 红线( 电源线) 和白色(控制线)。

以下为Futaba S3010的参数说明:S表示舵机,3表示它用的是三级马达,0表示是泛用型,10是指此舵机为模拟电路控制舵机。

舵机S3010 技术规格规格, 舵机, 技术整体介绍: 主用途通用伺服器特征低成本,高扭矩基板 S256马达 Tricore GM1510VR TR133-15其他 MATAL 轴承,引线长 300mm,HORND 寸法(L×W×H) 40.0×20×38.1 [mm]重量 41 [g]消费电流: 停止时 MAX 15 [mA](无负荷)(4.8V 时) 动作时 130 + 25 [mA](无负荷)消费电流: 停止时 MAX 15 [mA](无负荷)(参考值:6.0V 时) 动作时 145 + 30 [mA](无负荷)输出扭矩: 6.0V 时 6.5 + 1.3 [ Kg.cm]动作速度 6.0V 时 0.16 + 0.02 [Sec/60 度](以下数据说明了当S3010:高电平为1520us时:一定为中间位置;高电平为920us时:一定为最左边位置;高电平为2120us时:一定为最右边位置;这些数据说明了该舵机的转角只与高电平脉宽有关,与占空比无关。

)动作方向: CW pulse 窄(1520 → 920 [us]) CCW pulse 宽(1520 → 2120 [us])动作角度: CW 60 + 10 [度]CCW 60 + 10 [度]左右差 MAX 10 [度]dead Band: 6 + 3 us( 除去自动检查夹具) 静电耐量: 接触 8KV 以上Backlash: MAX 0.7 [度]晃动量: MAX 0.3 [mm]摆动: MAX 1 [回]/600 [us]微动,不灵敏带: 动作速度 100ms/度,不在动作范围使用电压范围: 4.0 ~ 6.0 [V]使用温度范围: -10 ~ + 45[℃]保存温度范围: -20 ~ + 60[℃]其他: 非指定时之测量电压 = 4.8 [V]幅率 = 14.25[mS]数字舵机与模拟舵机数字舵机与模拟舵机数字舵机与模拟舵机_控制方法与性能比较之二(我觉得你应该看看)数码舵机常见问题原理分析及解决:一、数码舵机与模拟舵机的区别传统模拟舵机和数字比例舵机(或称之为标准舵机)的电子电路中无MCU微控制器,一般都称之为模拟舵机。

菲尼克斯PLC继电器-

菲尼克斯PLC继电器-
模块 化的含 义是,可 以根 据需求 精确 地 确定 所需的 通道数。换 言之,不为 无用的 通 道耗费 资金和 空间。而如 固定位数 的多通 道 PLC 插件板或外形较厚的模块则做不 到这一 点。
灵活 性意味 着根据 应用场 合既 可以为 每 个通道 自由选 择输入电 压,也可以 装入不 同 的机电式继 电器或者半导 体继电器 (光电 耦 合器) 。固 定的可编程控制 器插件板在这 方 面也是 望尘莫 及。灵活性 也意味着 系统可 以 随时 扩展,并且 可以随 时方便、便 宜地更 换 可插拔式继电器和光电耦合器。
PLC 接口 带回拉式弹簧连接 由 底座接线端子 PLC-BSP…/21 和 可插拔微型继电器组成, 用于安装在 3 上
输入电压 UN
12VDC 24VDC 24VAC/DC 48VDC 60VDC 120VAC/110VDC 230VAC/220VDC2)
12VDC 24VDC 24VAC/DC 48VDC 60VDC 120VAC/110VDC 230VAC/220VDC2)
VARIOFACE 系统接头
(164,)2 mm
可插拔继电器 和光电耦合器,
6.2/14mm
插拔式桥接系统
两个转换 触点 传感器型 执行器型 通用型
按实际应用优化的 系列产品
I
250VAC/6A(10A)
可选用螺钉连接或者回拉式 弹簧连接两种形式
U 通断容量高
一体化集成输入电路 和保护电路
DINVDE0106-101
执行 器 (例如 电磁阀、接 触器等)的 所 有连接线 (包括回线) 都被直接连接在 PLC 执行器接口上。
传感 器 (例 如接 近开 关、限位 开关 等) 的所有连 接线 (包括开 关的供电)都直 接在 PLC 接口上有相应的连接位置。与传统的耦 合元 件相比,可以 节省两 个输出 接线端子 或 者馈 入连接端 子,同时节 省了中 间接线工 作 和宝贵的开关柜空间。

180种CPU引脚功能与机型对照表

180种CPU引脚功能与机型对照表

33 15 29 33 33 24 55 6 17 9 9 9 33 27 33 33 33 33
6
Байду номын сангаас
CKP1301S 康佳F2109E2 20 CH4001-5B41 长虹C2155 8 CH04001-5553 长虹C2151C 8 CH04001-5C25 长虹C1951K 8 CH0403-5H61 长虹A2928B 7 CH04801-5F43 长虹P2119A 7 CH05001 长虹C2995 41 CTV222S.PRC1 康佳T2516 41 CTV591S.GW3 海尔692-733AM-02 41 CXP80424-146 东芝3429KTP 37 CXP85332-108 东芝 F3SS 机芯 37 LA86C3348A 创维 Y 机芯 7 LC863320A 康佳F2979A 7 LC863324 TCL王牌-2116E 7 LC863328A-5T45 康佳T2188A 7 LC863348A 康佳F2109A 7 LC864012L-5711环宇新宇宙王C5420BZ 8 LC864512V-5D18 海尔HS-2588D 7 MN181768 创维 5N10 机芯 21 MN1874876TSH 松下TC-33GF85 33 TMS73C167 海尔H-2916 10 TMP47C834N-R122 东芝2128KTV 8 TMP87CH36N 厦华XT3868T 34 TMP87CM36N-3649 厦华XT29F8THD 34 TMP87CK36N 康佳T2988P 34 TMP87CX38N 康佳T2166E 20 TMP87CP38N 长虹G2967A 7 TMP87CH38N 厦华XT-3465 7 TMP87PS38N 海信TC2902GD 7 TMP87CK38N TCL王牌2901A 18 TMP87CS38N 飞利蒲29H8 8 ST6368B4/FHO 康佳T2979D1 37 ST6388 创维 5S01 机芯 37 P87C770 飞利蒲29G8 19 P83C266BDR 海信TC2532F 3、41 ONWA KWEC 康佳T2510 8 WH2000C 海尔HP-3408 41 KONKA266 康佳P3486C 14 KS88C8324 长虹G2573 42 Z8933212PSC 北京2163 18 Z90231 康佳F2109C 35 CCU-2070-LDTV-06A 福日HFC2553 28 CH05002 长虹D2963A 41 CHT0406 长虹R2118K 7 CHT0803 长虹43PT18 41 CHT0807 长虹2131FB 7 CHT0808 长虹29SD83 41

ftdx10 参数

ftdx10 参数

ftdx10 参数
详细参数如下:
- 频率范围:100kHz-30MHz。

- 频道数:100个存储信道。

- 接收方式:SSB、CW、RTTY、AM。

- 发射功率:10/50/100W 三种型号。

- 天调类型:自动天调。

- 接收电路:第一中频为9MHz 的下变频接收器。

- 接收滤波器:具有15个独立的带通滤波器,中频DSP 数字信号处理(IF SHIFT/WIDTH, IF NOTCH DNF, DNR, COUNTOUR)有效消除人为干扰。

- 发射滤波器:具有三级参数均衡器的麦克风放大器(SSB/AM 模式)。

- 尺寸:266W×91H×263Dmm。

- 重量:约5.9kg。

- 其他功能:VFO 各频段多模式存储功能、射频/音频发射监听、快速存储库、选购件扬声器-SP-30、选购件修平滤波器(300Hz)、选购件XF-130CN。

此外,FTDX10 还可选购LAN 单元(SCU-LAN10),配合网络远程控制软件,实现电台的远程操作,同时可在大屏幕上监视频段的状态。

IBAS180设备介绍

IBAS180设备介绍

设备主要功能
设备可以采用32路2M接口盘,最多能接入159个2Mbit/s; 支 持 8 路 DCC , 可 提 供 2 个 2.5Gbit/s 的 光 口 , 6 个 622Mbit/s 光 口 , 8 个
155Mbit/s光口或电口,20个10Mbit/s以太网口和10路PDH的光分支; IBAS180设备:低阶交叉能力为756×756 VC-12,即12×12VC4,高阶到低
光口成环原则 第一光口对偶成环 两个光口单独成环
光口对偶成环 第二光口对偶成环 第一光口E3/E4
06
07
风 扇
08 及

09 口
0A
子框上支路盘的分配
EMU+EOW
01 W.1-8
LT.1.1-32
02 E.1-8
LT.1.33-63
03 XCU-3
LT.2.1-63
04 XCU-3
LT.3.1-63/HT.11-14 05 LT.4.1-63/HT.1-4
当主用盘出现严重故障并且备份盘无严重故障时,会自动切 换。 UA为急告指示灯,灯为红色,灯亮是表示有急告。 NUA为非急告指示灯,灯为黄色,灯亮是表示有非急告。 LOCK为时钟模块的工作模式指示灯, 灯为绿色,灯亮表示时 钟模块处于锁定状态。 HOLD为时钟模块的工作模式指示灯, 灯为绿色,灯亮表示时 钟模块处于保持状态。 FREEE为时钟模块的工作模式指示灯, 灯为绿色,灯亮表示 时钟模块处于自由运行状态。
XCU-3盘(WKE2.154.035R3P)
槽位 05 06
子框中机盘上的时钟分配表
时钟分配
槽位
HT11
07
W1
0A
时钟分配 E1 HT1

微软软件保障(SA)优势与益处说明书

微软软件保障(SA)优势与益处说明书

Spotlight On…Software AssuranceVicky LeaMaximising SA Benefits1.2.3.4.5.6.❝❝❝❝❝❝❝❝❝❝❝❝❝❝❝❝Support and T raining Application Server Deployment Desktop Deployment VirtualisationSupport and T raining Application Server Deployment Desktop Deployment VirtualisationWindows 8.1 EnterpriseExtra functionality includes:❝DirectAccess❝BranchCache❝AppLockerPerpetually licensed customers retain rights toWindows 8.1 Enterprise Edition after SA expiration aslong as it is already deployed❝❝❝❝❝Microsoft User Experience Virtualization (UE-V)Microsoft Application Virtualization (App-V)Microsoft Enterprise Desktop Virtualization (MED-V)Microsoft Diagnostics and Recovery Toolset (DaRT)Microsoft Advanced Group Policy Management (AGPM)Microsoft BitLocker Administration and Monitoring (MBAM)Windows T o Go Office Home Friend’s HouseStart Start Start Primary Primary StartStart SASA Start SA Primary ✓Windows To Go Use Rights✓Roaming Use RightsCompanion Device LicensingOfficePrimarySAWindows RTCompanionx86Non-x86x86Windows RT Non-x86CSL❝Active Software Assurance coverage for qualifying desktop applications products❝HUP licences which can be purchased are limited to number of qualifying products covered by SA❝Microsoft provides setup and installation support❝Organisations are not responsible for their individual employee’s compliance with the Home Use Program end user license terms❝Usage must end if SA is not maintained Home Use Program RequirementsQualifying Product HUP Licence•Office Standard 2010/2013•Office Professional Plus 2010/2013•Office for Mac 2008•Office for Mac Standard 2011•Office Professional Plus 2013 HUPor•Office for Mac Home & Business 2011 HUP•Office 2010/2013 components •Office Professional Plus 2013 HUPor•Office for Mac Home & Business 2011 HUP•Visio Standard 2010/2013•Visio Professional 2010/2013•Visio Professional 2013 HUP•Project Standard 2010/2013•Project Professional 2010/2013•Project Standard 2013 HUPWindows 8.1 Virtualisation RightsFlexibility for Developers and T esters•Rights to run Windows 8.1 Enterprise in up to four virtual machinesSoftware Assurance Support and T raining Application Server Deployment Desktop Deployment VirtualisationProcess1.Activate the benefit in VLSC 2.Create a Training Voucher by supplying trainee name and selecting number of days 3.Attendee receives an email with a link to a list of CPLS locations 4.Vouchers remain valid for 180 days after creation, if reserved with a CPLS, regardless of the expiration of SAT raining Vouchers T echnical training from Microsoft Certified Partners for Learning SolutionsE-Learning❝Available training courses correspond to the licences forwhich SA has been purchased❝Number of allowable users corresponds to the numberof SA covered licences❝Applications and Systems contentis available for importing into acustomer’s Learning ManagementSystemLearning Central Portal24x7 Problem Resolution SupportPhone Support Incidents❝Complimentary incident for server coverage❝Additional incidents awarded for:•Server/CAL SA spend•Applications/Systems SA spendWeb-based Incidents❝Incidents may be submitted for server software coveredwith SA on an as needed basis❝SA is required for both server software and related CALsSoftware Assurance Support and T raining Application Server Deployment Desktop Deployment VirtualisationPlanning ServicesAvailable offerings:❝Desktop Deployment Planning Services (DDPS)❝SharePoint Deployment Planning Services (SDPS)❝Lync and Exchange Deployment Planning Services (L&EDPS)❝Private Cloud, Management, and Virtualisation DeploymentPlanning Services (PVDPS)❝SQL Server Deployment Planning Services (SSDPS)❝Developer T ools Deployment Planning Services (DTDPS)❝Public Cloud, Azure Deployment Planning Services (AZDPS)❝1, 3, 5, 10 or 15 day engagements available❝Services result in a deployment planBased on spend for Office Applications andServer Licences:❝For example•200 Office Applications = 1 day•8 SQL or Windows Server Standard Edition licences = 1 dayPlanning Services engagement days may be increased byconverting unused T raining Vouchers on a 3-to-1 basisBackup for Disaster RecoveryRequirements•Server licence covered with SA•All related CALs covered with SABenefits•A second server licence under which the same product may bedeployed on a back-up server solely for DR purposes during the term ofits Software Assurance coverageStep-up Licences❝Customers may migrate from a lower level edition to a higherlevel edition of a product❝The customer’s right to the use of software under a Step-Uplicence is conditioned on their having and retaining a Licencefor the qualifying product❝SA may be renewed for the higher level editionSoftware AssuranceSupport and T rainingApplication Server DeploymentDesktop Deployment VirtualisationInternet CaféVirtual Desktop InfrastructureOfficeHomeStartStartStartPrimaryPrimarySA SAStartSAPrimaryWindows RTx86x86x86✓VDA Rights✓Windows RT Companion VDA Rights✓Roaming Use RightsStartStartStartStartCompanionStartWindows Thin PC❝Repurpose existing PCs as thin clients byproviding a smaller footprint Windows-based OS solution❝Benefits:✓Reduced end point costs for VDI✓Rich remote desktop experienceAllows organisations to evaluate thin client computingwithout investing in dedicated hardwareLicence Mobility Within Server FarmsApplication Server Licencewith SASASASALicence Mobility through Software AssuranceSASAUnlimited Virtualization for SQL 2012License all the physical cores with SQL Server 2012 Enterprise Edition Core licenses with SASA SA SA SA SASASASA2. Check Y our BenefitsSoftware Assurance benefits are determinedby the volume licence agreement and thenumber of qualifying licences with SoftwareAssurance3. Build an SA Usage T eamActivity SA Benefit Benefit ManagerDeployment∙Packaged Services for DeploymentPlanning∙Home Use Program ∙IT Project Manager ∙HR ManagerTraining∙Training Vouchers∙E-Learning ∙IT or HR Manager∙IT End-user Support, HR, or Line-of-business ManagerSupport∙24x7 Problem Resolution Support∙Backup for Disaster Recovery ∙IT Support Manager ∙IT Managers4. Priorities and Usage GoalsSA Usage Goals❝Use no-cost training available through E-Learning and T raining Voucher benefits❝Extend IT resources by utilising24x7 Problem Resolution Support incidents, or scheduling deployment planning engagements through Packaged Services❝Offer employee “extras” like the latest Office products for use at home, or the opportunity to build technical skills through online and classroom training available through E-Learningand T raining Voucher benefits without impacting staff budgets❝T ake advantage of the Spread Payment option, when renewing your Volume Licensing agreement5. Build an SA Usage PlanAlign your SA usage plan with a business objectivePlan❝Get the latest version of Microsoft Exchange Server software through the New Product Versions benefit❝Arrange an Lync and Exchange Deployment Planning Services (L&EDPS) engagement to help extend your IT resources, and get expert planning guidance and deployment recommendations❝Ready IT and support staff with classroom training using T raining VouchersDeploy❝Use the deployment recommendations stemming from your Lync and Exchange Deployment Planning Services engagement❝Use E-Learning for end-user training❝Promote the Home Use Program across your organisation to accelerate end-user familiarity with Outlook/ExchangeUse❝Use 24x7 Problem Resolution Support to resolve issues quickly, and help minimise downtime❝Utilise Backup for Disaster Recovery to help users regain access to critical data and applications following disaster6. Follow Through❝Revisit SoftwareAssurance usageperiodically❝Document progress❝Develop a planningchecklist❝❝••••❝Download from /licensing❝•••••❝/licensing/software-assuranceSA Quick Start Guide❝Use for…•Instructions on activating and managing benefits•Useful links•Recommendations on best practices❝Download from Customer SA SiteVLSC❝Use for…•Activating and managing SA benefits•Downloading software•Finding product keys•Tracking licensing information❝/licensing/servicecenterVolume Licensing Service Center(VLSC)❝Y our Call to Action:。

ant801s技术参数

ant801s技术参数

ant801s技术参数英文回答:The Ant801S is a powerful and versatile eight-port PoE switch that is ideal for a variety of applications, including powering IP cameras, VoIP phones, and other PoE-powered devices. It features a compact and rugged design, making it easy to install and use in any environment.Technical Specifications:Number of Ports: 8。

PoE Ports: 8。

PoE Standard: IEEE 802.3af/at.PoE Power Budget: 65W.Max Power per Port: 30W.Data Rate: 10/100/1000 Mbps.Switching Capacity: 16 Gbps.Dimensions: 11.8 x 7.9 x 2.6 inches.Weight: 2.6 pounds.Additional Features:IEEE 802.3az Energy-Efficient Ethernet (EEE) support. Web-based management interface.SNMP support.Auto-negotiation and auto-MDIX.Overload protection.中文回答:型号,Ant801S.技术参数:端口数量,8个。

PoE端口,8个。

PoE标准,IEEE 802.3af/at.PoE功率预算,65W.每个端口的最大功率,30W.数据速率,10/100/1000 Mbps.交换容量,16 Gbps.尺寸,11.8 x 7.9 x 2.6 英寸。

VFS6045型产品特性说明书

VFS6045型产品特性说明书

VFS6045SA102VFS6045SA151VFS6045SA451VFS6045VA031VFS6045VA102 VFS6045VA121VFS6045VA201VFS6045VA301E M C C o m p o n e n t sNoise suppression filterFor home appliances (conductive noise countermeasure) VFS seriesVFS6045 typeFEATURESAPPLICATIONPART NUMBER CONSTRUCTIONCHARACTERISTICS SPECIFICATION TABLEMeasurement equipmentEquivalent measurement equipment may be used.VFS6045V A031Series nameL×W×H dimensions V: at 10MHzS: at 1MHzInternal codeImpedance6.0×6.0×4.5 mm(Ω)Type Impedance DC resistance Rated current Part No.(Ω)Typ.(Ω)Min.(Ω)typ.(Ω)max.(A)max.6045VA[at 10MHz]57300.0120.0156 6.0VFS6045VA0311451200.0190.0247 5.1VFS6045VA1212422000.0230.0299 4.95VFS6045VA2014683000.0360.0468 3.6VFS6045VA301127510000.0750.0975 2.5VFS6045VA102 6045SA[at 1MHz]1881500.1750.2275 1.5VFS6045SA1515524500.470.6110.9VFS6045SA45112321000 1.15 1.4950.5VFS6045SA102Measurement item Product No.ManufacturerImpedance4294A Keysight T echnologiesDC resistance34420A Hewlett-PackardE M C C o m p o n e n t sVFS6045 typeZ FREQUENCY CHARACTERISTICSINSERTION LOSS VS. FREQUENCY CHARACTERISTICSE M C C o m p o n e n t s VFS6045 typeSHAPE & DIMENSIONSRECOMMENDED LAND PATTERNRECOMMENDED REFLOW PROFILEPACKAGING STYLETEMPERATURE RANGE, INDIVIDUAL WEIGHT *Operating temperature range includes self-temperature rise.**The storage temperature range is for after the assembly.Dimensions in mmDimensions in mmT ype A B KVFS6045 6.3 6.3 4.7Package quantity1500 pcs/reelOperating temperature range*Storagetemperature range**Individualweight–40 to +105 °C–40 to +105 °C0.6 gE M C C o m p o n e n t sREMINDERS FOR USING THESE PRODUCTSBefore using these products, be sure to request the delivery specifications.SAFETY REMINDERSPlease pay sufficient attention to the warnings for safe designing when using this products.The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 30°C, humidity: 10 to 75% RH or less).If the storage period elapses, the soldering of the terminal electrodes may deteriorate.Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).Before soldering, be sure to preheat components.The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C.Soldering corrections after mounting should be within the range of the conditions determined in the specifications.If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design.Carefully lay out the coil for the circuit board design of the non-magnetic shield type.A malfunction may occur due to magnetic interference.Use a wrist band to discharge static electricity in your body through the grounding wire.Do not expose the products to magnets or magnetic fields.Do not use for a purpose outside of the contents regulated in the delivery specifications.The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-ment, industrial robots) under a normal operation and use condition.The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,person or property.If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us.(1) Aerospace/aviation equipment(2) T ransportation equipment (cars, electric trains, ships, etc.)(3) Medical equipment(4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment(7) T ransportation control equipment(8) Public information-processing equipment (9) Military equipment(10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment(12) Safety equipment(13) Other applications that are not considered general-purposeapplicationsWhen designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-tection circuit/device or providing backup circuits in your equipment.REMINDERSVFS6045SA102VFS6045SA151VFS6045SA451VFS6045VA031VFS6045VA102 VFS6045VA121VFS6045VA201VFS6045VA301。

某低压电器控制原理图(共10张)

某低压电器控制原理图(共10张)
日 期签 字底图总号旧底图总号描 图描 校批 准校 对标 审年 月 日数量设 计制 图标记签 字更改文件号工 艺审 核日期图样标记共 页1比 例第 页1重 量润滑油加热器控制原理图元 件 表序号符 号名 称型 号 规 格数量备 注安 装 在 电 控 柜 上 的 元 件断路器交流接触器热继电器断路器按钮按钮信号灯安 装 在 机 旁 柱 上 的 元 件信号灯信号灯按钮按钮~380VQF51KM51K51E1123456781234QF51KM51K51SA51SB51SB53HL51 HL53HL54SB52SB54AD16-22B/g31LA39-11/gSk5SX2 206-7CC3UA60 40-2W 63-90A3TF50 44-0XM03VL27 10-2DK33-0AB1111112815.577H564815.577H564说明: 1. E1为3台并联的油加热器组; 单台型号规格为: BGY/20-380/17.5 17.5kw ~380V;In=110A 线圈电压~220VSIEMENS1 整定值 80ASIEMENSSIEMENSHL521111815.583H564815.583H56411~380V/220VVQS1KM11电 压 表42L6-V0~450V交 流 接 触 器3TF3UA回 路 名 称二 次 图 号电控柜电控柜一次线路图QF21KM21润滑油加热器2号润滑油泵815.574H564815.577H564隔 离 开 关3VL27 161号润滑油泵断 路 器3VL27 10380V 脱扣器电流100A热 继 电 器绿色绿色绿色红色11电控柜端子排图816.688H564816.688H564X1123456789101112131415161718192021222324252627282930313233343536373839404142434445B411T

SINAMICS S200 和 S210 第三代 SINAMICS-drev 产品介绍说明书

SINAMICS S200 和 S210 第三代 SINAMICS-drev 产品介绍说明书

IntroduktionStiller du spørgsmål undervejs, såfår du svar–enten i Teams umiddelbart efter webinaret eller pr. e-mail i løbet af næste uge.Når webinaret slutter får du påskærmen link med adgang til Teams, link til kontaktformular samt link til dagens præsentation og relevante links.I bunden kan du forstørre visning til fuld skærm og justere pålydstyrken.New member -SINAMICS S200 converterNews -SINAMICS S210 converter3. Generation DrivesServo drive systemHigh-End Servo Drive System SINAMICS S120Modular DC/AC multi axis system with highest performance, flexibility and most advanced drive based technology •Seamless functionality from 1kW to 11 MWStandard Servo Drive System SINAMICS S200Single axis AC/AC servo drive system with high dynamic and highest compactness •S200 / S200 Basic with PTI or PN •1FL2 motors •MC 350 / 380 cables Midrange Servo Drive System SINAMICS S210Single axis AC/AC servo drive system with highest dynamic •1FK2, 1FT2, 1FS2 motors •OCC –One cable connection •Perfect match with SIMATIC controllers Basic Servo Drive SystemSINAMICS V90Single axis AC/AC servo drivesystem with basic functionality andperformance•PTI or PN•1FL6 motors•MC 300 cablesThe new servo drive system for standard servo marketSINAMICS S200 converterS200 / S200 BasicPulse train / PROFINETPower range: 1/3 AC 200V…240V: 0.1 –1kW;3AC 380…480V*: 0.2 -7kWSIMOTICS S-1FL2 motorLow / Medium / High inertiaAbsolute encoder single turn 17 / 21-bit single turn and multiturn 21 + 12-bitIP 54/ IP65MOTION-CONNECT 350 / 380Standard / Flexible bending cableUp to 30m lengthDual cable(SH20/30/40) /2 cables(SH48/52) / 3 cables(SH45/65/90)Drive end direction / Non drive end direction*Not available for S200 BasicS200 BasicPulse train (PTI)PROFINET (PN) 1/3AC 200V: 0.1 –1kWS200Pulse train (PTI)PROFINET (PN)1/3AC 200V: 0.1 –1kW3AC 400V: 0.2 –7kWSINAMICS S200A variety of functions for general applicationSINAMICS S200 Basic Focus on entry level basic applicationLine supply& power range 1/3AC 200V ~ 240V (-15%/+10%); 0.1~1.0kW3AC 380V ~ 480V (-15% / +10%); 0.2~7.0kW1/3AC 200V ~ 240V (-15%/+10%);0.1~1.0kWSafety STO, SS1-t* via terminal (SIL 3 / PL e)n.a.Brake resistor Integrated brake resistor (>0.1kW)Integrated brake resistor (>0.4kW)Control interface PTI: 10 DI / 6 DO / 2 AI / 2AOPN: 4 DI (2 high speed) / 2 DO / PTO6 DI / 4 DO / PTI / PTO4 DI (2 high speed) / 1 DO AC input detection(For power failure protection e.g. vertical axes)n.a.Holding brakecontrolDirect control of motor holding brake Ext’ relay required for holding brake control*SS1-t in preparationS200S200 Basic(PN/PTI 1) ): 200V 0.1-1,0kW S200(PN/PTI 1) ): 200V 0.1-1,0kW; 400V 0.2~7.0kW 200V FSA FSB FSC 400V FSAFSB FSC FSA FSB FSC FSD 1FL2SH20SH30SH40SH48SH52SH45SH65SH90200V LI 2)0.053)0.10.20.40.75 1.0MI 0.20.40.75 1.0400V LI 0.050.10.20.40.75 1.0 1.5 2.0MI 0.20.40.75 1.0 1.0 1.5HI 0.40.750.75 1.0 1.5 1.75 2.0 2.5 3.5 5.07.0hybrid connector metal angular connector Remark:1) PTI is in preparation 2) Motor inertia: LI/MI/HI →Low Inertia/Medium Inertia/High Inertia 3) Motor power rating, unit kW Absolute encoder single turn 17-bit / 21-bit; Absolute encoder multi-turn 21 + 12-bitEncoderConnectionmotor side(Power, Brake,Encoder)2 cable solution3 cable solutionmetal angular connector Dual cableIndustry Online Support •Guide how to commission via Web server Entry-ID: 109821000Industry Online Support •Guide how to commission in Tia portal viaStartdrive Entry-ID: 109821001SinamicsS200•Product site Website : Sinamics S200platformS210 2S210S210Startdrive V19):SS2,SOS,SLA,SBTSP,SLP,SCA, SLT (forventet)Old Version New VersionSupply Power [kW]S210 Converter Frame size S210 Converter 3rd Gen.1AC 230V0,16SL3210-5HB10-1UF0FSA6SL5310-1BB10-1CF01AC 230V0,26SL3210-5HB10-2UF0FSA6SL5310-1BB10-2CF01AC 230V0,46SL3210-5HB10-4UF0FSB6SL5310-1BB10-4CF01AC 230V0,756SL3210-5HB10-8UF0FSC6SL5310-1BB10-8CF03AC 400V0,46SL3210-5HE10-4UF0FSA6SL5310-1BE10-4DF03AC 400V0,756SL3210-5HE10-8UF0FSA6SL5310-1BE10-8DF03AC 400V16SL3210-5HE11-0UF0FSA6SL5310-1BE11-0DF03AC 400V1,56SL3210-5HE11-5UF0FSB6SL5310-1BE11-5DF03AC 400V26SL3210-5HE12-0UF0FSB6SL5310-1BE12-0DF03AC 400V3,56SL3210-5HE13-5UF0FSC6SL5310-1BE13-5DF03AC 400V56SL3210-5HE15-0UF0FSC6SL5310-1BE15-0DF03AC 400V76SL3210-5HE17-0UF0FSC6SL5310-1BE17-0DF06SL5970-0AA00-0AA0Empty SD card6SL5370-0GB00-0AA0S210 V6.1 SD cardFind Openness applikation og filmen påSiemens Industry Online Support SIOS23. generations SINAMICS-drev✓User Management & Access Control(UMAC)✓Secure communication between TIAPortal/Web client and drive… secure the accessto your automationprocesses!Plant security Network security ✓integrity and authenticity check to protectthe use of manipulated Firmware ✓Secure default factory settings onlynecessary functions enabled andpreconfigured with secure settingsDefense in DepthPlant securityNetwork security System integrityCybersecurity for Industry with SINAMICS part 1 -Intro –YouTubeCybersecurity for Industry with SINAMICS part 2 -User Management Access Control –YouTube Cybersecurity for Industry with SINAMICS part 3 -Creating a customised user –YouTubeCybersecurity for Industry with SINAMICS part 4 -Username and Password lost –YouTubehttps:///cs/ww/en/view/109820695SINAMICS DriveSim Basic SINAMICS DriveSim Advanced Main One model (FMU) for ALL SINAMICS drivesOne software for NEW generation of SINAMICSdrives (e.g., S210 new, G220…)Functional andlogical partSub-selection of the drive’s parameters (focus on corefeatures of drive functionality)Real firmware with target specific modifications and allparameters and configurationsSpecificationsAs least parameters as possible, with the samemeaning as in the real driveAll parameters and configurations as in the real drive ToolsTool independent, can be used in any time-basedsimulation tools (e.g., SIMIT)Available directly in TIA Portal (with Startdrive) as anadd onFocus onValidation the PLC code and drive parameters &Sizing in the design phaseVirtual drive commissioning(Virtual engineering tooldirectly in TIA Portal)Communicationwith the PLCConnection to PLCSIM Advanced with originaltelegram content interfaceConnection to PLCSIM Advanced with originaltelegram content interface (coming soon, DSA v2.0) Price and supportmaterialsFree of charge; validated and verified against realdrive; support materialsWith a price tag; validated and verified against realdrive; support materials*****************************************************Find os påLinkedInVi er klartil spørgsmåli Teams om lidt…。

Futaba SBS-01S 电机传感器说明书

Futaba SBS-01S 电机传感器说明书
$POOFDUUIFDPOOFDUPSQPMBSJUZ QSPQFSMZ Ŷ ,I FRQQHFWHG LQ UHYHUVH H[SORVLRQV RU ILUH could occur.
*O T F S U U I F D P O O F D U P S T F D V S F M Z Ŷ,IWKHFRQQHFWRUZRUNVORRVHGXULQJPRGHO operation, control will be lost and cause er.
(The “Servo connection alarm” function of the transmitter must be enabled.)
˔ 4FSWPBMBSNɿ If you forget to turn off the receiver
power, you are informed by the sounding of an alarm from the servo. This servo alarm sound is also useful when searching for lost aircraft.
2015, 5 (1)
˔"QQMJDBCMFTZTUFNT
'VUBCB5.;7ʙ
'VUBCB54;7ʙ
5IFUJNFPGNBZ
0,
*ODPNQBUJCMFXJUI TFSWPTPUIFSUIBOUIF 4#64
5IF4#44DBOOPUCF VTFEXJUI4#64T OFVUSBMTFSWPT
(SFFO3FE
8IFOTFUUJOHVQUIF TMPU
(SFFO3FE "MUFSOBUFCMJOL
6OSFDPWFSBCMFFSSPS

180个CPU引脚功能表

180个CPU引脚功能表

:微处理器型号应用彩电型号待机控制电源电压时钟振荡复位端音量控制M491 熊猫3608A 26 9 7、8 9 15M494B1 飞跃54C2Y-2 38 39 25、26 34M37100M8-581 东芝329P8M 25 1 28、29 27 2M37102M8 牡丹64C2 58 64 30、31 29 55M50124SA M50162SA 三洋CTP-6925-00 10 21 2、3 23 41M50161-554SP 日立CTP-2005D 23 24、25 26 19M50163-150SP 日立CTP-2008SP 31 21 2、3 23 41M50430-581SP 东芝182E5C 1 9、10 6 27M50431-101SP 长城JTC-512 27 42 1、2 36 28M50431-513SP 索尼KV-2182CH 27 42 1、2 36 28M50432-551SP 日立CPT-2157SF 30 42 33 34 16 14M50433-531SP 双喜C541PD-1 16 1 33 34 11 27M50435-893FP JVC-210C 14 1 33 34 11 27M50453-101SP 佳丽彩EC-2063R 27 42 1、2 36 28M50436-560SP 熊猫3631 9 52 28 29 27 2M50436-582SP 东芝288D6C 6 52 28 29 27M50436-683SP 东芝2500XH 6 52 28 29 27 3M50436-585SP M50436-589SP 东芝289X6M2 6 52 28 29 27 4M50436-688SP 东芝248X9M 6 52 28 29 27 3M50436-602SP 牡丹51C5 10 52 28 29 27 2M34300N4-011SP 快乐HC2808R 30 42 34 35 7 10M34300N4-012SP 夏华XT-7698T 30 42 34 35 7 10M34300N4-551SP 日立G7-X 1 42 34 35 7 10M34300N4-657SP 日立CMT-2518 1 42 34 35 7 10M37103M4-655SP 日立C21D8A 42 1 28 29 27 2M34300N4-555SP 日立CMT-2518 30 42 34 35 7 10M34300N4-584SP 华日C54J-1 33 42 34 35 7 13M34300N4-585SP 东芝206Q9M 33 42 34 35 7 13M34300N4-587SP 东芝219R9C 33 42 34 35 7 13M34300N4-624SP 北京2132MA 17 42 34 35 7 10M34300N4-628SP 长虹C2151A 17 42 34 35 7 10M34300N4-721SP 海信TC2520 17 42 34 35 7 10M37210M3-508SP 熊猫2128 21 27 24 25 30 3M37210M3-800SP 康佳T2588B 21 27 24 25 30 3M37210M3-902SP 康佳T3877N 21 27 24 25 30 3M37210M4-650SP 日立CMT2579-041 27 24 25 30 8M37210M4-688SP熊猫2518 31 27 24 25 30M37210M4-786SPM37210M4-705SP 康佳T3477N 21 27 24 25 30 3M37211M2-609SP 康佳T2989H 22 27 24 25 30 3M37222M6-B80SP 东芝2150XH 7 42 31 32 33M34302MB-612SP 索尼KV-2189TC 6 52 28 29 27 2M37210M3-010SP 康力CE-6448-1 21 27 24 25 30 3M37204MB-852SP 日立CMT2598 58 64 30 31 29M37103M4-750SP 福日HFC-2168 42 1 28 29 27 2M37102M8-503SP 福日HFC-2587 58 64 30 31 29 7M37102M8-509SP 乐华MC-15A 44 64 30 31 29M37220M3 康佳T2136F 26 22 19 20 25 34 MN15151TWE MN15151TWP 松下C-150 29 1 44 45 7 16 MN1871611TKA 松下TC-V292H 6 22 62 63 54 45 MN1872432TWI 松下TC-29V30R 33 22 61 62 63 54 45 MN1874033TNW 松下三超画王33 22 61 62 63 54 24 MN152810TTC3 松下TC-21L3RQ 29 1 44 45 7 16 MN152811TZX 松下TC-2150R 24 1 35 36 7 16 MN1871675T6S 松下TC-29GF70R 35 22 62 63 54MN1871274 长虹R2519N 39 40 41 34MN15245KWC MN15245SAY 华强69510-00 21 42 40 41 8 34 MN14821JTB MN14821TKG 龙江7755JM 7 1 18 19 2 22 MN15142TEAI 松下TC-2185 6 39 37 38 8 32 MN15282 MN15287 康佳2916A 8 52 2、3 4 44 TMP47C433AN 牡丹54C10 8 42 31 32 33 2 TMP47C430N 熊猫C44P3 27 28 22 23 21 2 TMP47C434N 康佳T914H 22 42 31 32 33 2 TMP47C837N 熊猫2158 22 42 31 32 33 4 TMP43238135A 黄河HC47-3 14 42 24 25 23 20 TMP47C1638AU353 长虹C2919P 31 54 42 43 44 2 TMP47C634AN 快乐HC2983N 22 42 31 32 33 2 TMP47C1238ANU068 长虹C2588P 10 54 42 43 44TMP87PM36N 康佳T3888 34 42 31 32 33 2 TMP73C47 长城G8135BF 15 1 33 34 32 39 TMP87CM38N 长虹T2981 7 42 31 32 33TMP87CH33N 19 42 31 32 33 1 TMP47C834N-R122 东芝2125XH 8 42 31 32 33 5 TC9150P 康佳KTN-5145 10 24 22 23 5、6 TC9002AP 东芝C-2021Z 10 3、4TD6368B4/FHO 康佳T2979D1 37 42 31 32 33 5 HD44840A65 汤姆逊TFE5114DK 7 21 17 18 15 13 GS8234-01F 牡丹64C1 44 64 30 31 29LK5103 长城JTC-531 8 42 31 32 33 2 LK5140 22 42 31 32 33 2 KD9218B 北京8356C 7 23 31 32 24 1 KY88C94 厦华XT7688T 61 15 49 50 55 51 KAIDA8803A 北京8306-3Y 40 1 2、3 6 34UPD1514C-036 日立N982 1 28 15 16 17 22 UPD1937C 51CD5 1 12 10、11 7 Z86227 牡丹CW25638 4 14 7 、8 9 37 Z86227-SR1285 金星C5416 32 14 7、8 9 40 Z90103-JX-2 金星C5417 32 14 7、8 9 40 Z90361 康佳T3289W 38 34 31 32 33BM5069 松下TC-M25C 32 52 28 29 27 1 CKP1003S 康佳P2993N 24 42 31 32 33 2 CKP1008S 康佳2592N 20 42 31 32 33CKP1009S 康佳A2109E 20 42 31 32 33CKP1105S 康佳F2109C 35 34 31 32 33 6 CKP1301S 康佳F2109E2 20 42 31 32 33CH4001-5B41 长虹C2155 8 13 40 11、12 16 36 CH04001-5553 长虹C2151C 8 13 40 11、12 16 36 CH04001-5C25 长虹C1951K 8 13 40 11、12 16 36 CH0403-5H61 长虹A2928B 7 12、21 10、11 17 39 CH04801-5F43 长虹P2119A 7 12、21 10、11 17 39 CH05001 长虹C2995 41 42 31 32 33 2 CTV222S.PRC1 康佳T2516 41 42 31 32 33 2 CTV591S.GW3 海尔692-733AM-02 41 42 31 32 33CXP80424-146 东芝3429KTP 37 64 34 35 36CXP85332-108 东芝F3SS 机芯37 63 64 34 35 36LA86C3348A 创维Y 机芯7 12 10、11 17LC863320A 康佳F2979A 7 12 10、11 17 5 LC863324 TCL王牌-2116E 7 12 10、11 17 8 LC863328A-5T45 康佳T2188A 7 12 10、11 17 5 LC863348A 康佳F2109A 7 12 10、11 17 5LC864012L-5711 环宇新宇宙王C5420BZ8 13 11、12 16 36LC864512V-5D18 海尔HS-2588D 7 12、21 10、11 17MN181768 创维5N10 机芯21 29 40 41 34 14 MN1874876TSH 松下TC-33GF85 33 22 62 63 54 16 TMS73C167 海尔H-2916 10 54 43 44 45 4 TMP47C834N-R122 东芝2128KTV 8 42 31 32 33TMP87CH36N 厦华XT3868T 34 42 31 32 33 2 TMP87CM36N-3649 厦华XT29F8THD 34 42 31 32 33 2 TMP87CK36N 康佳T2988P 34 42 31 32 33 2 TMP87CX38N 康佳T2166E 20 42 31 32 33TMP87CP38N 长虹G2967A 7 42 31 32 33TMP87CH38N 厦华XT-3465 7 42 31 32 33TMP87PS38N 海信TC2902GD 7 42 31 32 33TMP87CK38N TCL王牌2901A 18 42 31 32 33 4 TMP87CS38N 飞利蒲29H8 8 42 31 32 33 6 ST6368B4/FHO 康佳T2979D1 37 42 31 32 33 5ST6388 创维5S01 机芯37 5 31 32 33P87C770 飞利蒲29G8 19 38 39 41 42 43P83C266BDR 海信TC2532F 3、41 28 30 31 32 33 12 ONWA KWEC 康佳T2510 8 52 2、3 4 44 WH2000C 海尔HP-3408 41 34 31 32 33KONKA266 康佳P3486C 14 28 31 32 33 2KS88C8324 长虹G2573 42 34 31 32 33Z8933212PSC 北京2163 18 34 31 32 33Z90231 康佳F2109C 35 34 31 32 33 6 CCU-2070-LDTV-06A 福日HFC2553 28 27 1 4CH05002 长虹D2963A 41 42 31 32 33 2 CHT0406 长虹R2118K 7 12 10、11 17CHT0803 长虹43PT18 41 42 31 32 33CHT0807 长虹2131FB 7 42 31 32 33CHT0808 长虹29SD83 41 42 31 32 33CKP1001S 康佳T2133G 17 34 31 32 33 2 CKP1004S 康佳T2139N 20 42 31 32 33 2 CKP1101S 康佳T2990N 38 34 31 32 33CKP1103S 康佳T2992N 38 34 28 29 33CTV222S.PRC1 康佳T2516 41 42 31 32 33 2CX519004P 索尼KV-2062CH 10 21 2、3 23 41 CX85116B-621S 索尼KV-2168MT 64 34 35 36CX513-512P 索尼KV-2090CH 1 9、10 6CX522-054 索尼KV-1882CH 2 41 22 23 24CX523-110P 索尼KV-2062CH 17 21 2、3 36 41 CXP80420-134S 金星C7428 37 64 34 35 36CXP80420-139S 北京3931H 37 64 34 35 36 5、6 CXP80424-165S 东芝2929KTP-Ⅱ37 64 34 35 36 9、10 CXP85332-512 东芝F3SS机芯37 34 35 36PCA84C440/401 TCL-9329SP 41 42 31 32 33 2 PCA84C640/019 金星C498 41 42 31 32 33 2 PCA84C841/177 长虹D2965 41 42 31 32 33 2PCF84C644 飞利蒲21GX3566193S19 42 31 32 33 2P87C766 康佳T3498 41 42 31 32 33IX0237CE 夏普C-1885DK 20 14 12、13 4 17 IX0411CEN 夏普DV-5406 15 21 2、3 23 41 IX0442CE 夏普C-5405DK 14 30 24 25 26 19 IX0605CE 夏普C-1805DK 1 9、10 6IX0933CE 夏普CV-2121DK 16 1 33 34 11 27 IX0981CE 夏普29S21-A1 7 42 40 41 1 36 IX1194CE 夏普8P-MW2 7 42 40 41 1 36 IX1830CE 夏普CV-2189 58 64 30 31 29 7 IX2321CE 夏普21D-CM 32 27 24 25 30 8IX2372CE 夏普W328 46 64 30 31 29IX2504CE 夏普21FN1 22 27 24 25 30LC863316A 康佳F2109A 7 12 10、11 17 5 LC864512A-5C77 海信TC2139 7 12 10、11 17 39 LC864516AN 海信TC2146 7 12 10、11 17 39 LC864525A 长虹A2928B 7 12 10、11 17 39 LC864916A 康佳F2589D 7 12 10、11 16 26 SAA1293 上海Z247-8A 5 2 1、6 4 34 SC430402CFC 长虹43PT18 14 57 59 71ST63156 福日2108H 2 40 25 26 24 39 ST6367B1/FEJ 康佳T5432E 37 42 31 32 33 5 ST6378B4/FR1 康佳F2977D2 37 42 31 32 33 5。

新时达变频器

新时达变频器
根据电机铭牌参数设定
P31.01
输出K2功能
25
3
3:变频器运行
P32.00
A0输入类型
1
0
0:0-10VDC
P40.02
加速时间
5
参见下文
P40.03
减速时间
5
同上
P70.0测延时
800
0
设置为零时,变频器不接电机运行时不报故障
1、此表只适用于新时达AS180标准变频启停柜,只列出需要修改的最少参数,其它情形需修改参数请参其考操作手册。
2、变频器恢复出厂设置:参数设置首页4:参数处理Init=7
3、电机加减速时间设定:
电机功率≤7.5KW,设置为10s;
11KW≤电机功率≤15KW,设置为15s;
18.5KW≤电机功率≤22KW,设置为20s;
30KW≤电机功率≤45KW,设置为25s;
55KW≤电机功率≤90KW,设置为30s;
新时达
功能码
功能码名称
出厂值
设定值
说明
P00.00
登录密码
0
0
设置为0,按下Enter键,显示登陆成功,即可设置参数,不需要退出
P10.02
命令通道选择
0
1
1:端子运行命令给定
P10.03
速度通道选择1
0
3
3:模拟量给定目标速度
P20.01
电机1额定功率
根据电机铭牌参数设定
P20.02
电机1额定电流

常用近500个三极管(MOSFET)中文资料

常用近500个三极管(MOSFET)中文资料

9011,9012,9013,9014,8050,8550三极管的区别9011 NPN 30V 30mA 400mW 150MHz 放大倍数20-809012 PNP 50V 500mA 600mW 低频管放大倍数30-909013 NPN 20V 625mA 500mW 低频管放大倍数40-1109014 NPN 45V 100mA 450mW 150MHz 放大倍数20-908050 NPN 25V 700mA 200mW 150MHz 放大倍数30-1008550 PNP 40V 1500mA 1000mW 200MHz 放大倍数40-140详情如下:90系列三极管参数90系列三极管大多是以90字为开头的,但也有以ST90、C或A90、S90、SS90、UTC90开头的,它们的特性及管脚排列都是一样的。

9011 结构:NPN集电极-发射极电压30V集电极-基电压50V射极-基极电压5V集电极电流0.03A耗散功率0.4W结温150℃特怔频率平均370MHZ放大倍数:D28-45 E39-60 F54-80 G72-108 H97-146 I132-1989012 结构:PNP集电极-发射极电压-30V集电极-基电压-40V射极-基极电压-5V集电极电流0.5A耗散功率0.625W结温150℃特怔频率最小150MHZ放大倍数:D64-91 E78-112 F96-135 G122-166 H144-220 I190-3009013 结构:NPN集电极-发射极电压25V集电极-基电压45V射极-基极电压5V集电极电流0.5A耗散功率0.625W结温150℃特怔频率最小150MHZ放大倍数:D64-91 E78-112 F96-135 G122-166 H144-220 I190-3009014 结构:NPN集电极-发射极电压45V集电极-基电压50V射极-基极电压5V集电极电流0.1A耗散功率0.4W结温150℃特怔频率最小150MHZ放大倍数:A60-150 B100-300 C200-600 D400-10009015 结构:PNP集电极-发射极电压-45V集电极-基电压-50V射极-基极电压-5V集电极电流0.1A耗散功率0.45W结温150℃特怔频率平均300MHZ放大倍数:A60-150 B100-300 C200-600 D400-10009016 结构:NPN集电极-发射极电压20V集电极-基电压30V射极-基极电压5V集电极电流0.025A耗散功率0.4W结温150℃特怔频率平均620MHZ放大倍数:D28-45 E39-60 F54-80 G72-108 H97-146 I132-1989018 结构:NPN集电极-发射极电压15V集电极-基电压30V射极-基极电压5V集电极电流0.05A耗散功率0.4W结温150℃特怔频率平均620MHZ放大倍数:D28-45 E39-60 F54-80 G72-108 H97-146 I132-198三极管85508550是一种常用的普通三极管。

电磁阀系列

电磁阀系列

电磁阀系列4V110-06,4V210-06,4V210-08,4V310-10,4V410-15,4V120-06,4V220-06,4V220-08,4V320-10,4V420-15,4V130-06,4V230-08,4V330-08,4V430-10,3V210-06,3V210-08,3V1-06,3V1-08,BM520,BM520D,2V025-06 ,2V025-08,4M210-08,4M210-06,4V230C-08,4V230-08E,4V230P-08,4M310-10,4M310-08,4M410-15,4V320-08,4V330C-10,4V330E-10,4V330P-10,3V110-06,3V310-10,V220-08,3V320-10,3V410-15,3V420-15,Q25DC-L8,Q25DC-l15-L10,Q25DC-L15,K25DH-6,K25DH-8,K25DH-10,K25DH-15,K25DH-20,K25DH-25,K25DH-32,K25DH-40,K25D2H-6,K25D2H-8,K25D2H-10,K25D2H-15,K25D2H-20,K25D2H-25,K25D2H-32,K25D2H-40,K35D2H-6,K35D2H-8,K35D2H-10,K35D2H-15,K35D2H-20,K35D2H-25,K35D2H-32,K35D2H-40,K24JD-10,K24JD-10a,K24JD-15,K24JD-15a,PU520-02S,PU520-03S,PU520-04S,PS140S,PS380S,PS340S,Q24DH-6,Q24DH-8,Q24DH-10,Q24DH-15,Q24DH-20,Q24DH-25,Q24DH-32,Q24DH-40,Q24D2H-6,Q24D2H-8,Q2D2H-10,Q24D2H-15,Q24D2H-20,Q24D2H-25,Q24D2H-32,Q24D2H-40,Q23XD-2,Q23XD-3,Q23XDL-1.6,Q23XDZ-1.6,Q23XDB-1.6,K23JD-6,K23JD-8,K23JD-10,K23JD-25,K23JD-20,K25JD-6,K25JD-8,K25JD-10,K25JD-15,8020750,8022750,8020850,8022850,8021750,8021850,2630600,2630700,2636000,2637050,2636 200,2637250,2637250,K23JD-8W,K23JD-10W,K23JD-15W,K23JD-20W,K23JD-25W,K23JD-32W,K23JD-40W,K23JD-50W,K25JD-8W,K25JD-10W,K25JD-15W,K25JD-20W,K25JD-25W,K25JD-32W,K25JD-40W,K23JD-8WT,K23JD-10WT,K22JD-8W,K22JD-10W,K22JD-15W,K22JD-20W,K22JD-25W,K22JD-32W,K22JD-40W,K22JK-8W,K22JK-10W,K22JK-15W,K22JK-20W,K22JK-25W,K22JK-32W,K22JK-40W,K23JD-15WT,K23JD-20WT,K23JD-25WT,K25JK-8W,K25JK-10W ,K25JK-15W,K25JK-20W,K25JK-25W,K25JK-32W,K25JK-40W,K25JD2-8BW,K25JD2-10BW,K25JD2-15BW,K25JD2-20BW,K25JD2-25BW,K25JD2-32BW,K25JD2-40BW,K25JD2-50BW,K23JSD-L15,K23JSD-L20,K23JSD-L25,MVSD220-4E1,,MVSD220-4E2,MVSD300-4E1,MVSD300-4E2,MVSD260-4E1,MVSD260-4E2,MVSD260-4E2C,MVSD180-4E1,MVSD180-4E2,VF3130,VF3230,VF3330,VF5120,VF5220,VF5430,VF5520,VF320,VF5420,VF1120,VF1220,VF3530,VF3430,VF5120,VF5220,VF6120,VF6220,VF6320,VF6420,VF6520,VZ5120,VZ5220,VZ5320,VZ5420,VZ5520,SY3120,SY5120,SY7120,SY3220,SY5220,SY7220,2V025-06,2V025-08,2V040-10,2V160-10,2W160-15,2W200-20,2W250-25,2W350-35,2W400-40,2W500-50,US-10,US-15,US-20,US-25,US-35,US-40,US-50,ZCT-6,ZCT-8,ZCT-10-15,ZCT-20-25,NV160-15K,NV200-20K,NV250-25K,2W160-15K,2W200-20K,2W250-25K,2W400-40K,Q22DH-15,Q22DH-20,Q22DH-25,Q22DH-40,Q22DH-50,927000,927100,927200,927300,927400,927500,927600,927700,VX2120-02,Q22XD-2L,K23D-2,K23D-3,K23D-1.2T,K23D-2T,K23D-3T,ZBSF-15F,ZBSF-20F,ZBSF-25F,ZBSF-32F,ZBSF-40F,ZBSF-50F,ZBSF-65F,ZBSF-80F,ZBSF-100F,ZQDF-15,ZQDF-20,ZQDF-25,ZQDF-32,ZQDF-40,ZQDF-50,DQK-1322,DQK-1422,DQK-2422,DQK-2442,XQ230640,XQ250640,XQ230641,XQ250641,XQ2636789,XQ2536678,CES-15,CES-20,CES-25,DF-15,DF-20,DF-25,US-170-15,US-170-20,US-170-25,US-170-35,US-170-40,US-170-50,FB2E’C,Q25DC-L6,Q25DC-L8,Q25DC-L10,Q25DC-L10,Q25DC-L15,Q25DC-L20,Q25DC-L25,Q25D2C-L8,Q35D2C-L10,Q35D2C-L15,Q35D2C-L20,K35D2C-L25,Q24JD-6,Q24JD-8,Q24JD-10,Q24JD-15,Q24JD-20,Q24JD-25,Q24JD2-6,Q24JD2-8,Q24JD2-10,Q24JD2-15,Q24JD2-20,Q24JD2-25,VT301,VT315,VT315,VT317,VS4130,VS3135 ,LT23JD-8,LT23JD-15,Q22HD-15,Q22HD-20,Q22HD-25,Q22HD-40,Q22HD-50,Q23D-1.5,Q25D-6,Q25D-8,Q25D2-6,Q25D2-8,Q25D-20,Q25D2-25,Q25D-32,Q25D-40,Q25D2-40,ZFF-02,ZFF-03,ZFF-04,FDF-3,FDF-5,FDF-6,FDF-8,FDF-10,FDF-13,FDF-16,FDF-19,FDF-25,FDF-32, JZQ-J40N(W),JZQ-J50N(W),0927100,0927000,0927100,0927200,0927300,0927400,0927500,0927600,0927700,0955105,0955205,0955305,0955405,0955505,0955605,0955805,TK23D-15,QY23D-5,QY23D-6,DC231-Y,FB2E-V,ZCZP-25F,ZCZP-32F,ZCZP-40F,ZCZP-50F,ZCZP-65F,ZCZP-80F,ZCZP-100F,J011SA-8,J011SA-10,J011SA-15,J011SA-20,J011SA-25,DF(ZCS)-15,DF(ZCS)-20,DF(ZCS)-25,DF(ZCS)-32,DF(ZCS)-40,DF(ZCS)-50,DF(ZCS)-50F,DF(ZCS)-65F,DF(ZCS)-75F,DF(ZCS)-80F,DF(ZCS)-100F,DF(ZCS)-150F,DF(ZCS)-200F,SR351-RN2*R,SR351-RN2*D,SR351-RN2*DK,SR351-RN2*DL,SR351-RN2*DW,SR351-RN2*R-T,SR351-RN2*D-T,SR351-RN2*DK-T,SR351-RN2*DL-T,SR351-RN2*DW-T,SR351-DN2*R,SR351-DN2*D,SR351-DN2*DK,SR351-DN2*DL,SR351-DN2*DW,SR551-RN25D,SR551-RN28D,SR551-RN2*R,SR551-RN2*D,SR551-RN2*DK,SR551-RN2*DL,SR551-RN2*D-W,SR551-DN2*R,SR551-DN2*D,SR551-DN2*DK,SR551-DN2*DL,4V110-M5,4V120-M5,4V130-M5,3V110-M5,3V120-M5,4A110-M5,4A120-M5,4A130-M5,K23JD-4W,K25D-6,K25D-8,K25D-10,K25D-15,K25D-20,K25D-25,K25D-32,K25D-40,K25D2-6,K25D2-8,K25D2-10,K25D2-15,K25D2-20,K25D2-25,K25D2-32,K25D2-40,22E-B4B,23E-B4B,24E-B4B,34E-B4B,22E2-B4B,23E2-B4B,24E2-B4B,34E2-B4B,XQ230440,XQ230640,XQ230840,XQ231040,XQ231540,XQ240440,XQ250440,XQ250640,XQ250840,XQ251040,XQ251540,XQ230441,XQ230641,XQ231041,XQ231541,XQ250441,XQ250641,XQ250841,XQ251041,XQ251541,XQ350441,XQ350641,XQ351041,XQ351541,XQ350441.1,XQ350641.1,XQ351041.1,XQ351541.1,XQ230280,XQ230281,XQ230282,XQ230290,XQ230291,XQ230292,UZ-A-06,UZ-A-08,UZ-B-08,UZ-B-10,UZ-C-06,UZ-C-08,UZ-C-08,UW-C-06,UW-C-08,UW-C-10,UD-6,UD-6H,UD-8,UD-8H,UD-10,UD-10H,UX23-2L,UX22-2L,UX22-1L,UF-06,UF-06H,UF-08,UF-10,UF-10H,UW-10,UW-15,UW-20,UW-25,UW-35,UW-40,UW-50,UW-15T,UW-20T,UW-25T,UW-15R,UW-20R,UW-25R,UWS-10,UWS-15,UWS-20,UWS-25,UWS-35,UWS-40,UWS-50,JZQ-J32N(W),JZQ-J25N(W),JZQ-J20N(W),JZQ-J15N(W),Q23DB-6,Q23DB-8,Q23DB-10,Q23DB-12,Q23DB-15,Q23D2B-6,Q23D2B-8,Q23D2B-10,Q23D2B-15,Q24DB-6,Q24DB-8,Q24DB-10,Q24DB-10,Q24D2B-6,Q24D2B-8,Q24D2B-10,Q24D2B-15,22173629,39136932,39184841,39312905,39418926,36479811,42535922,42863100,4 2865386,39312905,39418926,39479811,42535922,42848291,42855205,42855213,42855536,42855544,42855551,42855569,42855577,42855585,42858126,42858803,42866608,42 866616,99260424,99260432,99260838,99261109,99263055,99267288,99268799,ATB00020,ATB00021,ATC05026,ATC05027,ATC05028,ATC05044,9313915-252104,9313715-164101, 34GDB*-H10B-T,24GDB*-H10B-T,24GDB*-H6B-T,34GDB*-H6B-T,34DGY*-H20B-T,DI23D-63B,DMFB1-25YJ,DMB1-53YJ,DMFZ1-25YZ,DMFZ1-53YZ,BDY4-55,23QDF6B,23QDF6K,QY23D-2K,QY23D-2,JZQ-J10N(W),DQK-2642B,DQK-2642,DQK-1432,DQK-2632,DQK-2622,DQK-2622C,DQK-2432,DQK-2632B,DQK-2442,MVSC180-4E1,MVSC180-4E2,MVSC220-4E1,MVSC220-4E2,MVSC260-4E1,MVSC260-4E2,MVSC300-4E1,MVSC220-4E1,MVSC300-4E2,MVSC220-4E2C,MVSC260-4E2C,MVSC300-4E2C,MVSC460-4E1,MVSC460-4E2,MVSC600-4E1,MVSC600-4E2,PU520-02S,PU520-03S,PU520-04S,PS140S,PS380S,PS340S,LT23JD-8,LT23JD-15,34E1-25B(Y),34E-10B(Y),34E-63B(Y),34E-10B,34E-25B,34E-63B,DTBF-25Z (B),DTBF-53Z(B),34E2-10B,34D2-10B,34E2-25B,34D2-25B,34E2-63B,34D2-63B,35E2-10B,35D2-10B,35E2-25B,35D2-25B,35E2-63B,35D2-63B,22E2-10B,22D2-10B,22E2-25B,22D2-25B,22E2-63B,22D2-63B,23E2-10B,23D2-10B,23E2-25B,23D2-25B,23E2-63B,23D2-63B,24E2-10B,24D2-10B,24E2-25B,24D2-25B,24E2-63B,24D2-63B,22E-10(B),22E1-25(B),22E-63(B),23E-10(B),23E1-25(B),23E-63(B),24E-10(B),24E1-25(B),24E-63(B),25E-10(B),25E1-25(B),25 E1-63(B),CD-III-20,CD-III-40,CD-III-50,CD-III-62,CD-III-76,CD-III-80,MCF-25DD,MCF-45DD,AMF-20A,AMF-20,AMF-25,AMF-40,AMF-65,AYMF-76,DYM-89,换向阀22E*B6H-T,22B*-B6H-T,22E*-H6B-T,22B*-H6B-T,24D*-B10H-T,24E*-B10H-T,24B*-B10H-T,24E*-H6B-T,24B*-H6B-T,34E*-H6B-T,34E*-H6B-T,24D*-H10B-T,24E-H10B-T,34D*-B10H-T,34E*-B10H-T,34B*-B10H-T,34D*-H10B-T,34E*-H10B-T,34B*-H10B-T,24EY*-H20B-T,24BY*-H20B-T,34DY*-B20H-T,34EY*-H20B-T,24EY*-H32B-T,24BY*-H32B-T,34DY*-B32H-T,34EY*-H32B-T,34BY*-H32B-T,34EY*-L20H-T,34BY*-L20H-T,34EY*-L32B-T,34BY*-L32B-T,24SO-L10H-T,34SO-L10H-T,24SO-L10H-W,34SO-L10H-W,24SO-B10H-T,34SO-B10H-T,24SO-B10H-W,34SO-B10H-W,34SO-L20H-T,34SO-L20H-W,34SO-B20H-T,34SO-B20H-W,34SO-L32H-T,34SO-L32H-W,34SO-B32H-T,34SO-B32H-W,34SO-H10B-T,34SO-H10B-W,ZS1-L10EAO,ZS1-L20EO,4WE6A,4WE6B,4WE6C,4WE6D,4WE6Y,4WE6E,4WE6J,4WE6G,4WE6M,4WE6T,4WE6H,4WE6Q,4WE6U,4WE6L,4WE6Y,4WE6A*/OF,4WE10A , 4WE10B,4WE10C,4WE10D,4WE10Y,4WE10E,4WE10J,4WE10G,4WE10M,4WE10T,4WE10H,4WE10Q,4WE10U,4WE10L,4WE10Y,4WE10A*/OF,4WEH10,4WEH16J,4WE16G,4WE16M,4WE16T,4WE16H,4WE16Q,4WE16U,4WE16L,4WE16Y,4WEH25,4WEH32J,4WEH32E,4WEH32V,4WEH32Q,4WEH32W,DSG-02-2B,DSG-02-3C,DSG-03-2B,DSG-03-3C,DSG-03-2B,DSG-03-3C,DG4V-3-*A,DG4V-3-*B,DG4V-3-*C,DG4V-5-*A,DG4V-5-*B,DG4V-5-*C,22D-10(B),22D-25(B),22D-63(B),23D-10(B),23D-25(B),23D-63(B),24D-10(B),24D-25(B),24D-63(B),25D-10(B),25D-25(B),25D-63(B),34D-10(B),34D-25(B),34D-63(B),35D-10(B),35D-25(B),35D-63(B),22E-10(B),22E-25(B),22E-63(B),23E-10(B),23E-25(B),23E-63(B),24E-10(B),24E-25(B),24E-63(B),25E-10(B),25E-25(B),25E-63(B),34E-10(B),34E-25(B),34E-63(B),35E-10(B),35E-25(B),35E-63(B),22D2-10(B),22D2-25(B),22D2-63(B),23D2-10(B),23D2-25(B),23D2-63(B),24D2-10(B),24D2-25(B),24D2-63(B),25D2-10(B),25D2-25(B),25D2-63(B),34D2-10(B),34D2-25(B),34D2-63(B),35D2-10(B),35D2-25(B),35D2-63(B),34BYM-H16B-T,34EYM-H20B-T,34BYO-B20H-T,34EYY-H20B-T,24EYM-H20B-T,24EYY-H20B-T 34EYM-L20H-T,24EYM-B32H-T,24E*-F6B,24E*-F6B-R,24E*-F6B-W,34E*-F6B,24E*-F10B,24E*-F10B-Z,24E*-F10B-R,24E*-F10B-R-Z,24EO-F10B-W,24EO-F10B-W-Z,34E*-F10B,34E*-F10B-Z溢流阀5370,QZ-01,YF-B8H*-S,YF-B10H*-S,YF-B20H*-S,YF-B32H*-S,YF-L8H*-S,YF-L10H*-S,YF-L20H*-S,YF-L32H*-S,YF-F32H*-S,YF-F50H*-S,YFDO-B20H*-S,YFEH-B20H*-S,YFDO-B32H*-S,YFEH-B32H*-S,YFDO-L32H*-S,YFDO-L20H*-S ,YFEH-L20H*-S,YFEH-L32H*-S,Y2D-H10,Y2E-H10,Y2D-H20,Y2E-H20,Y2E-H32,Y2-H6,Y2-H10,Y2-H32,Y2-H32,FL-B10,FL-B15,FL-B20,FJL-B10,FJL-B15,FJL –B20,HY-H10,HY-H20,HY-H32,DBDH.S6K,DBDH.S10K,DBDH.S20K,DBDH.S30K,DBDH.S6P,DBDH.S10P,DBDH.S20P,DBDH.S30P,DBD10G,DBD15G,DBD20G,DBD30G,DB10…,DB20…,DB30…,DB10G,DB20G,DB30G,DBW10B,DBW10A,DBW10G,DBW20B,DBW20A,DBW20G,P-B10(B),P-B25(B),P-B63(B),Y-10(B),Y-25(B),Y-63(B),Y-100(B),Y-160(B),DBDS6P/31.5,DBDS10P/31.5,DBDS20P/31.5,DBDS30P/31.5,DSHG-04-2B2,DSHG-04-3C2,DSHG-06-2B2,DSHG-06-3C2,Y2-Hb10B,Y2-Hb20B,YF-B10H4-S,YF-B20H4-S,YF-B32H4-S,YF-L20H4-S,YF-L32H4-S,Y1-10B ,Y1-25B,Y1-63B,YF-B8H,YF-L8H,S-BSG-03-2B3B,S-BSG-05-2B3B,DBD6K,DBD10K,DBD20K,DBD30K,EDG-01-1-50,EBG-03-50,EBG-06-50,DBG10-30*,34D-10(B)Y,34D-25(B)Y,34D-63(B)Y,35D-10(B),34D-25(B)Y,34D-63(B)Y,Y-F*6D-P/D,Y-F*6D-A/D,Y-F*6D-B/D,Y1-F*10D-P/O-1,Y1-F*10D-P1/O-1,Y1-F*10D-A/O,Y1-F*10D-B/O,2Y1-F*10D-AB/O-1,Y1-F*16D-P/O-1,Y1-F*16D-A/O-1,Y1-F*16D-B/O-1,2Y1-F*16D-AB/O-1,Y-D6B,Y1-D6B,Y1-D10B延时阀XQ230450,XQ230650,XQ231050,XQ231550,XQ250450,XQ250650,XQ251050,XQ251550 机控阀JM-05,JM-06,JM-06A,JM-07,MSV-86522TB,MSV-86522EB,MSV-86522PP,MSV-86522PPT,MSV-86522LB,MSV-86522R,JMJ-01,JMJ-02,JMJ-03,JMJ-04,K23JC3-6,K23JC3-8,XQ230413,XQ230613,XQ250413,XQ250613,脉冲阀MCF-20,MCF-25,MCF-40,MCF-40,MCF-50,MCF-65,YMF-50,YMF-62,TMF-76,DMF-Z-20,DMF-Z-20A,DMF-Z-25,DMF-Z-25P,DMF-Z-40S,DMF-Z-50S,DMF-Z-62S,DMF-Z-76S,DMF-Y-50S,DMF-Y-63S,DMF-Y-76S调速阀RE-01,RE-02,RE-03,RE-04,KA-08,KA-10,KA-15,KA-20,KA-25,35355106,35359090,ZFRM5,ZFRM6,ZFRM10,ZFRM16,Q-B10(B),Q-B25(B),Q-B63(B),Q-B100(B),Q1-B10(B),Q1-B25(B),Q1-B63(B),Q1-B100(B),QT-10B,QIT-10B,QCT1-25B,QC1-25B,Q-10B,Q-25B,Q-63B,QI-10B,QI-25B,QI-63B,QI-100B,E22XQ-10,E22XQ-18,E22XQ-25,E22XQ-63,Q-F6D-O,Q-F6D-P,Q-F10D-O,Q-F16D-O,QA-F6D-A,QA-F6D-AU,QA-F6D-B,QA-F6D-BU,2QA-F10D-AB,2QA-F10D-ABU,QA-F6/10D-A,QA-F6/10D-AU,QA-F6/10D-B,QA-F6/10D-BU,QA-F6/16D-A-1,QA-F6/16D-AU-1,QA-F6/16D-B,QA-F6/16D-BU气动角座阀QJZ-15,QJZ-20,QJZ-25,QJZ-32,QJZ-40,QJZ-50,QJZ-15B,QJZ-20B,QJZ-25B,QJZ-32B,QJZ-40B,QJZ-50B开关阀MOV-1,MOV-2,MOV-3,MOV-3A滑动开关HSV-06,HSV-08,HSV-10,HSV-15,HSV-20,HSV-25急停阀XQ230420.1,XQ250420.1,XQ230620.1,XQ250620.1气控阀系列4A110-06, 4A210-06,4A210-08,4A310-10,4A410-15,4A120-06,4A220-06 ,4A220-08,4A230-06,4A230-08,4A310-06,4A320-10,4A410-15,4A420-15,4A130-06,4A230-08,4A330-08,4A330-10,4A430-15,3A210-06,3A210-08,3A220-06,3A220-08,XQ230430,XQ250430,XQ230631,XQ250631,XQ230630,XQ250630,XQ230631,XQ250631,3A110-M5,3A120-M5,3A110-06,3A120-06,3A210-06,3A220-06,3A210-08,3A220-08,3A310-08,3A320-08,3A310-10,3A320-10,3A410-15,3A420-15,XQ230630,XQ230830,XQ231030,XQ231530,XQ250430,XQ250630,XQ250830,XQ251030,XQ251530,XQ230431,XQ230631,XQ230831,XQ231031,XQ231531,XQ250431,XQ250631,XQ250831,XQ251031,XQ251531,XQ350431,XQ350631,XQ351031,XQ351531,XQ350431.1,XQ350631.1,XQ351031.1,XQ351531.1手动阀手拉阀4R110-06,4R210-06,4R210-08,4R310-08,4R410-15,3R110-06,3R210-06,3R210-08,3R310-08,3R310-10,3R410-15,4H210-08,4H310-10,4H410-15,TSV-68522M,TSV-98322M,4H210-06,4H210-08,4H310-08,4H310-10,4H410-15,3H210-06,3H210-08,3H310-08,3H310-10,SH402,SH402A,SH403,SH403A,HV-02,HV-03,HV-04,HV200,HV400,HV200D,HV200S,K34R6(D),XQ230622,XQ250622,XQ230422,XQ250422,XQ230420,XQ230620,XQ250420,XQ250620,XQ230420.01,XQ230620.01,XQ250420.01,XQ250620.01,XQ230421,XQ230621,XQ250421,XQ250621,XQ230422,XQ230622,XQ250422,XQ250622,XQ230460,XQ230660,XQ231060,XQ231560,XQ250460,XQ250660,XQ251060,XQ251560,XQ350460,XQ350660,XQ351060,XQ351560,XQ350460.1,XQ350660.1,XQ351060.1,XQ351560.1,XQ240461,XQ240661,XQ241061,XQ241560,XQ340461,XQ340661,XQ341061,XQ341561,XQ340461.1,XQ340661.1,XQ341061.1,XQ341561.1,99260416,ATC05031,ATC21170,4WMM6,4WMM10,4WMM16,K34R8-20(G3/4″),K34R8-25(G1″)脚踏阀FV-02,FV-320,FV-420,4F210-08,4F210-08L,4F210-08G,K23R7-8,K25R7-8,ST402,ST403,ST402A,ST403A,XQ230423,XQ230623,XQ250423,XQ250623排气阀QE-01,QE-02,QE-03,QE-04,KKP-6,KKP-8,KKP-10,KKP-15,KKP-20,KKP-25,KPF-8,KPF-15,KPF-25拔气阀XQ230421,XQ250421,XQ230621,XQ250621顶杆阀XQ230410,XQ250410,XQ230610,XQ250610,XQ230411,XQ230611,XQ250411,XQ250611行程阀XQ230412,XQ250412,XQ230612,XQ250612,XQ230270 M5,XQ230271 M5,XQ230272 M5,XQ230273 M5,XQ230274 M5,22C-10B(H),22C-25B(H),23C-10B,24C-10B单向阀节流阀ASC-6,ASC-8,ASC-10,ASC-15,KLA-L6,KLA-L8,KLA-L10,KLA-L15,KLA-L20,KLA-L25,KLA-L40,KLA-L50,KLJA-8,KLJA-10,KLJA-15,KLJA-20,KLJA-25,KLJA-32,KLJA-40,DIF-L10H,DIF-L20H2,DIF-L32H1,DF-B10H1,DF-B20H1,DF-B32H1,DF-F32H1,LDF-L10H-S,LDF-L20H-S,LDF-L32H-S,LF-B10H-S,LF-B20H-S,LF-B32H-S,L-H10,L-H20,L-H32,S6A,S8A,S10A,S15A,S20A,S25A,S30A,S10P1,S20P1,S30P1,RVP6,RVP8,RVP10,RVP15,RVP20,RVP25,RVP30,MK/MG8…,MK/MG6…,MK/MG10…,MK/MG15…,MK/MG20…,MK/MG25…,MK/MG30…,DV6/2,DRV6,DV8/2,DRV8,DV10/2,DRV10,DV12/2,DRV12,DV16/2,DRV16,DV20,DRV20,DV30,DRV30,DVP6/DRVP,DVP8/DRVP,DVP10/DRVP,DVP12/DRVP,DVP16/DRVP,DVP20/DRVP,DVP25/DRVP,DVP30/DRVP,L-10(B),L-25(B),L-63(B),L-100(B),L1-10(B),L1-25(B),L1-63(B),L1-100(B),1-10,1-25,1-63,1-100,1-160,AJ-Ha10B,AJ-Hb20B,AJ-Hb32B,DF-B10H,DF-B20H,DF-B32H,B-10(B),B-25(B),B-63(B),I-10B,I-25B,I-400B,I-65B,I-100,LA-H8L,LA-H10L,LA-H16L,LA-H20L,LA-H25L,LA-H32L,Z1S6P,Z1S10P,P-B10(B),P-B25(B),P-B63(B),IY-25B,IY-63B,IY-100B,L-F6D-O,L-F6D-P,L-F10D-P-1,L-F10D-O-1,L-F6/10D-P1/P-1,L-F16D-P,L-F16D-O,L-F6/16D-P1-P,LA-F6D-P,LA-F6D-A,LA-F6D-AU,LA-F6D-B,LA-F6D-B,LA-F6D-BU,LA-F6D-AB,LA-F6D-ABU,LA-F10D-P-1,LA-F10D-A-1,LA-F10D-AU-1,LA-F10D-B-1,LA-F10D-BU-1,2LA-F10D-AB-1,2LA-F10D-ABU-1,LA-F16D-P,LA-F16D-A-1,LA-F16D-AU-1,LA-F16D-B-1,LA-F16D-BU-1,2LA-F16D-AB,2LA-F16D-ABU-1,2A-F6D-O/AB,2A-F10D-O/AB,A-F6D-P,A-F6D-O-1,A-F10D-P,A-F10D-P/PP1,A-F10D-O,A-F10D-B/P,A-F16D-P,A-F16D-P-PP1-1,A-F16D-O,A-F16D-B/P-1 叠加阀Z2FS6…,Z2FS10…,Z2FS16…,Z2FS22…,Z1S6,Z1S10,Z2S6,Z2S10,Z2S16,Z2S22,ZDR6D,ZDR10D,ZDB6VA,ZDB6VB,ZDB6VP,ZDB10VC,ZDB10VD,Z2DB6VA,Z2DB6VB,Z2DB6VP,Z2DB10VC,Z2DB10VD,MTCV-02WA,MTCV-02WB,MTCV-03WA,MTCV-03WB,MPCV-02WA,MPCV-02WB,MPCV-03WA,MPCV-03WB,MBRV-02P,MBRV-02A,MBRV-02B,MBRV-03P,MBRV-03A,MBRV-03B,MCV-02P,MCV-02A,MCV-02B,MCV-03P,MCV-03A,MCV-03B,MTV-02P,MTV-02A,MTV-02B,MTV-03P,MTV-03A,MTV-03B,MRV-02P,MRV-02A,MRV-02B,MRV-02W,MRV-03P,MRV-03A,MRV-03B,MRV-03W,MSCV-02A,MSCV-02B,MSCV-03A,MSCV-03B,DGMC-5,DGMDC-5,DGMFB-5,DGMR1-5,DGMX-5,DGMR-5,DGMPC-5,DGMC-3,DGMR-3,DGMR1-3,DGMX-3,DGMDC-3,DGMPC-3,DGMFN-3液控单向阀A-Ha10L,A-Ha20L,A-Ha32L,AL-Ha10B,AL-Ha20B,AL-Ha32B,AJ-Ha32B,AJ-Hb32B,AJ-Hb32F,A1Y-Ha10B,A1Y-Hb10B,A1Y-Hb10BL,A1Y-Hb20B,A1Y-Hb20L,A1Y-Ha20B,A1Y-Ha32B,A1Y-Ha32F,A1Y-Hb32B,A1Y-Hb32L,A1Y-Hb32F,DFY-B10H1,DFY-B32H1,DFY-B10H1,DFY-F32H1,DBW30B,DBW30A,DBW30G,BDT10,BDT20,BDT30,DBC,SV10,SV20,SV30,SL10,SL20,SL30,AJ-Ha10B,DSHG-03-3C,DSHG-04-3C,DSHG-06-3C,DG5V-5,DG5V-7,DG5V-8,DG4SG-012C,DG5S4-02C,DG5S4-04-M,DG5S4-H8M-C,DG5S4-10-53-80,DFY-B10H4,DFY-B20H1,DFY-B32H2,34B*-H6/8(18),34B*-H6/8/(16),34BY-*10G,24BY-*10G,AY-F6D-A (B)-1,AY-F6D-B(A)-1,2AY-F6D-b-AB(BA),AY-F10D-A(B),AY-F10D-B(A),2AY-F10D-AB (BA),AY-F16D-A(B),AY-F16D-B(A),2AY-F16D-AB(BA)梭阀KS-06,KS-08,KS-10,KS-15真空发生器CV-10LS,CV-15LS,CV-20HS止逆阀22211882,22247308,39113311,39477674,39479852,39481155,39580055,39477674,39479852,39 481155,39580055,42855478空压机配件39120563,39155478,39155577,39155759,39156385,39156393,39156435,39156468,39181342,39 303276,42836445,42836452,42836460,42859710,42844613,42854307,42859170,42855494,42857748,42859413,42859462,42859900,42865584,42865600,42865618,42888107,42888115,42 889188,42889427,54600366,92101054,92169630,92549211,92699214,92699222,92700319, 92716554,92716760,92794270,92866904,99246191,99260630,99250037,99250631,99252280,99 253183,99254299,99257008,99261000,99262149,99262818,99263162,99271819,99272510,9927 2528,99272536,99272551,99272569,99272577,99272585,99272585,99272593,99304065,ATC05029,ATC05030,AT,62007,ATC62008,ATC62009,ATC62010,ATC62013卸荷阀DA10…/…,DA20…/…,DA30…/…,DAW10…/…,DAW20…/…,DAW30…/…减压阀/先导型减压阀DR10…/…YM,DR20…/…YM,DR30…/…YM,DR10…/…Y,DR20…/…Y,DR30…/…Y,DRC,J-10(B),J-25(B),J-63(B),J-100(B),J1-10(B),J1-25(B),J1-63(B),3DREP6C,EFBG-03-125,3DREP6A(B),DRE(M)10-30/*Y,DRZ(M)20-30/*Y,BJY-16A,BJY-32A,J-F*6D-P-1,J-F*6D-P (A)-1,J-F*10D-P-2,J-F*10D-P(A)-2,J-F*10D-P(B)-2,J-F*16D-P-1,J-F*16D-P(A)-1,J-F*16D-P(B)-1,EFZ10-25顺序阀DZ10…/…YM,DZ20…/…YM,DZ30…/…YM,DZ10…/…Y,DZ20…/…Y,DZ30…/…Y,DZC,X-B10(B),X-B25(B),X-B63(B),X-F*6D-P-1,X-F*10D-P-1,X1-F*6/10D-P1/P-1,X1-F*6/16D-P1/P-1,2X-F*6D-AB/BA-1,2X-F*10D-AB/BA-2,2X-F*16D-AB/BA,ECZ25-25,ECZ63-63,XA-Ff6D-B,XA-Ff6/10D-B-1,XA-Ff10D-B ,XA-Ff6/16D-B-1,XA-F*16D-B截止阀JZF-L10H,JZF-L15H,JZF-L20H,JZF-L25H,JZF-L32H,JZF-L40H,JZF-F10H,JZF-F15H,JZF-F20H,JZF-F25H,JZF-F32H,JZF-F40H,JZF-F50F,JZFS-B8,JZFS-B10,JZFS-B20,JZFS-B25,JZFS-B32,CJZQ-H10L,CJZQ-H15L,CJZQ-H20L,CJZQ-H25L,CJZQ-H32L,CJZQ-H40L,CJZQ-F10L,CJZQ-F15L,CJZQ-F20L,CJZQ-F25L,CJZQ-F32L,CJZQ-F40L,CJZQ-F50L,CJZQ-F65L,QJH-10,QJH-15,QJH-20,QJH-25,QJH-32,QJH-40,QJH-50,QJH-65希玛红外测温仪:AR280,AR-280,AR300,AR-300,AR350,AR-350,AR842A,AR-842A,AR852B,AR-852B,AR862A,AR-862A,AR872D,AR-872D,AR872,AR-872,AR882,AR-882,AR882A,AR-882A,AR892,AR-892,AR922,AR-922,AR872A,AR-872A;希玛噪音计:AR814,AR-814,AR824,AR-824,AR834,AR-834,AR854,AR-854;希玛风速仪:AR816,AR-816,AR826,AR-826,AR836,AR-836,AR846,AR-846,;希玛测试表:AR8800A+,AR-8800A+;希玛卤素气体测试表:AR5750A,AR-5750A;希玛照度计:AR813,AR-813,AR823,AR-823;希玛测距仪:AR821,AR-821,AR831,AR-831,AR841,AR-841,AR851,AR-851;希玛温湿度计:AR827,AR-827,AR837,AR-837,AR847,AR-847;希玛超声波测厚仪:AR850,AR-850,AR860,AR-860;希玛涂层测厚仪:AR930,AR-930,AR931,AR-931;希玛测振仪:AR63A,AR-63A,AR63-A,AR63B,AR-63B,AR63-B希玛兆欧表:AR3126,AR-3126,AR917,AR-917;希玛线缆测高仪:AR600E,希玛(家居用品):AR810,AR-810,AR140,AR-140,AR141,AR-141,AR142,AR-142,AR146,AR-146,AR110,AR-110,AR111,AR-111,AR114,AR-114,AR115,AR-115,AR116,AR-116,AR123,AR-123,AR120,AR-120,AR166,AR-166,AR131,AR-131,AR130,AR-130,AR134,AR-134,AR135,AR-135,AR136,AR-136,AR137,AR-137,AR160,AR-160,AR170,AR-170,AR162,AR-162AR171,AR-171,AR180,AR-180,AR181,AR-181,AR105,AR-105,AR106,AR-106,AR100,AR-100,AR190,AR-190,AR151,AR-151,AR805,AR-805,AR133,AR-133;深圳美瑞克耐压仪:RK2670,RK-2671,RK2670A,RK-2670A,RK2671A,RK-2671A,RK2671B,RK-2671B,RK2671C,RK-2671C,RK2672A,RK-26 72A,RK2672B,RK2672B,RK2672C,RK-2672C,RK2672D,RK-2672D,RK2674A,RK-2674A,RK-30KVAC/DC,RK-50KVAC/DC,美瑞克泄露电流测试仪:RK2675A,RK-2675A,RK2675B,RK-2675B,RK2675C,RK-2675C,RK2675W,RK2675W,RK2676A,RK-26 76A;美瑞克电子测试仪:RK2678,RK-2678,RK2678X,RK-2678X,RK2681,RK-2681,RK2681A,RK-2681A,RK2681C,RK2681C,RK2511,RK2511;美瑞克音频信号发生器:MP1212BL,MP-1212BL,MP1212BL+,MP1212BL+,MP1212D,MP-1212D,MP1212E,MP-1212E,MP1212G,MP-1212G, RAG-101,RGS-17;;美瑞克喇叭极性测试仪:MP5991,MP-5991;美瑞克高压数字电表:RK-1940-1,RK-1940-2,RK-1940-3,RK-1940-4;美瑞克功率计:RK-9901,RK9901,RK-9800,RK9800,TFC-1000L,TFC1000L,;美瑞克功率计TFC-2700L,TFC2700;美瑞克直流稳压器:PS-303D+,PS305D+,PS-303DM+,PS-305DM+,RK-3010D,RK-3020D,RK-3030D;显像管再生仪:REK-III,;美瑞克双针交流毫伏表:RVT-322,RVT322;美瑞克电池内阻仪RK-200A,RK200A;美瑞克示波器:MOS-800,MOS800,ST16A,ST-16A,CA8020/CA620,CA9040,CA-9040,CA9060,CA-9060,TH2513,TH-2513,TH2513A,TH-2513A,TH2512B,TH-2513B;美瑞克函数信号发生器:PF1634,PF-1634,PF1635,PF-1635,PF1602,PF-1602,PF1605,PF-1605,PF1610,PF-1610,PF1620,PF-1620;美瑞克跳线成型机:ME-900A,ME900A,ME-900B,ME900;美瑞克测振仪:ME-3000,ME3000;美瑞克高压测试棒RK-8,RK8,RK-8A,RK8A;ST 示波器探头;美国米尼帕数字万用表:ET-1700,ET-835B,ET-835D,ET-835EX,ET-870,ET-870C,ET-870E,ET-845,ET-880,ET-2081,ET-981,ET-983,ET-985,ET-986,ET-988, ET-3171,ET-3172,ET-3172C,ET-3142,ET-3187,;美国米尼帕钳形表:ET-6018A,ET-6015F,ET-6016A,ET-6052,ET-3120,ET-3122,ET-3123,ET-997,ET-997TR,ET-2230,ET-2500,ET-2501,ET-2600,ET-2601,ET-2600(带USB接口), ET-3500,ET-3500A,ET-3320,ET-3322,ET-3370,ET-3372,ET-3373,ET-3374,ET-3376,ET-3355,ET-3387,ET-6956C,ET-6056A,ET-6050,ET-6051;美国米尼帕指针万用表:ET-3010,ET-3021,美国米尼帕:MC-153,MA-120,MA149,RPM-120;深圳胜利高电容表:VC6013,VC-6013,VC6243A,VC-6243A,VC6243+,VC-6243+;深圳胜利高万用表:VC70A,VC-70A,VC70C,VC-70C,VC70D,VC-70D, VC7001,VC-7001,VC81B,VC-81B,VC86C,VC-86C,VC86D,VC-86D,VC86E,VC-86E,VC88A,VC-88A,VC88B,VC-88B,VC88 C,VC-88C,VC88D,VC-88D,VC88E,VC-88E,VC89A,VC-89A,VC89D,VC-89D,VC890C+,VC-890C+,VC89 0D,VC-890D,VC97,VC-97,VC921,VC-921,VC980+,VC980+,VC2020A,VC-2020A,VC2040A,VC-2040A,VC2100,VC-2100,VC220,VC-220,VC9801A+,VC-9801A+,VC9802A+VC-9802A+,VC9804A+,VC-9804A+,VC9805A+,VC-9805A+,VC 9806+,VC-9806+,VC9807A+,VC-9807A+,VC9808+,VC-9808+,VC9901,VC-9901,VC9902,VC-9902;深圳胜利高照度计:VC1010,VC-1010,VC1010A,VC-1010A;深圳胜利高木材水分仪:VC2GA,VC-2GA,VC2GB,VC-2GB,VC2GC,VC-2GC;深圳胜利高频率计:VC2000,VC-2000,VC2002,VC-2002,VC2003,VC-2003;深圳胜利高温湿度:VC230,VC-230,VC230A,VC-230A;深圳胜利高红外线测温仪:VC305,VC-305,VC306,VC-306,VC307,VC-307,VC308,VC-308,VC310,VC-310,VC310A,VC-310A,VC3123,VC3123,VC3125,VC-3125,VC303,T60;深圳胜利高温度表:VC203,VC-203,VC306A,VC-306A,DM6801A,DM-6801A,DM6902,DM-6902,VC305A,VC-305A;深圳胜利高频率表:VC3165,VC-3165,VC3218A,VC-3218A;深圳胜利高温湿度表:VC330,VC-330;深圳胜利高兆欧表:vc60D+,VC-60D+,VC60B+,VC60D,VC-60D;深圳胜利高电容表:VC60E,VC-60E,VC6013C,VC-6013C,VC6013B,VC-6013B,深圳胜利高钳形表:VC6016A,VC-6016A,VC6016C,VC-6016C,VC6056A,VC-6056A,VC6056B,VC-6056B,DM3218,VC6018A,VC-6018A,VC6056D,VC-6056D,VC6226,VC-6226;深圳胜利高万用表:VC6056C,VC-6056C,VC830L,VC-830L, VC3021,VC9205,VC-9205,VC9208,VC-9208,VC3010,VC70F,VC-70F;深圳胜利高台式万用表:VC8045-II,VC-8045-II,VC8045II,VC8145B,VC-8145B,VC8155,VC-8155,VC8145A,VC-8145;深圳胜利高相序表:VC850,VC-850,VC850A,VC-850A;深圳胜利高多用表:VC98A,VC-98A,VC98C,VC-98C;深圳胜利高接地电阻表:VC4105A,VC-4105A,VC4105B,VC-4105B;深圳胜利高钳形表:DM6015F,DM-6015F,DM6019,DM-6019,DM6050+,DM6050+,DM6050+,DM-6050+,DM6052+,DM-6052+;深圳胜利高转速表:DM6234P+,DM-6235P+,DM6235P,DM-6235P,DM6236P,DM6236P;深圳胜利高校验仪:VC01,VC-01,VC02,VC-02,VC03,VC-03,VC04,VC-04,VC05,VC-05,VC11,VC-11,VC14,VC-14,VC15,VC-15,VC15+,VC-15+,VC140,VC-140,VC1713B,VC-1713B,VC1715B,VC1715B,VC25,VC-25,深圳胜利高网络测试表:VC468,VC-468,深圳胜利高测振仪:VC63,VC-63,VC63A,VC-63A;深圳胜利高钳形接地表:VC6412,VC-6412;VC189,VC-189,VC-187,VC187,VC469,VC-469;深圳胜利高过程多用表:VC78,VC-78,VC79,VC-79;深圳胜利高风速仪:VC816,VC-816,深圳胜利高噪音计:VC824,VC-824,深圳胜利高测距仪:VC851,VC-851,VC851A,VC-851A,深圳胜利高涂层测厚仪:VC852A,广州依泰科技接地电阻仪:ETCR2000,ETCR-2000,ETCR2000B,ETCR2000B;广州依泰科技数字相位仪:ETCR4000,ETCR-4000;广州依泰科技钳形表:ETCR9000,ETCR-9000,ETCR5000,ETCR-5000,ETCR5000A,ETCR-5000A;上海新秸水份仪:HT903,HT90B,HT904,HT904B,HT50,LJS-1,LJS-2,MT-3,SL2882,MD-2G,MD-4G,DT90B,DT90C,DT90E,AD100,KT50,KT-50,KT50B,KT-50B,ST-85;深圳新宝瑞:DT2234A,DT2234C/B,DT2235A,DT2236B,DT6234B,DT6235B,DT6236B,SM8238,SM8237,DT2239B,DT2240B,DM6801A/B,DM6802B,TM6902B,TM6902D,LX1010B,LX1010BS,LX1020BS,LX1 330B,UV340,SM245,SM8124,SM852B,MD-2G+,MD-6G,MD-196,MD918,MD-918,MT300C,ST350,ST652,ST840,ST960,ST1450,SPD200A,SPD200B,SPD200/H2S,SPD200/H2,SPD201/O2,SPD202/EX,MD814/812,MD914/912,MD7820,MD7822;昆山科泰:KT7001,KT7002,KT7003,KT7004,KT7005,KT7006,KT7007,KT7040,KT7050,KT7001A,KT7110,KT7170 ,KT7120,KT7130,KT7160,KT7180,KT7070,KT7080,KT7030,KT7032,KT7244,KT7060,KT7090,KT7150, KT7260L,KT101,KT102,KT7201,KT7202,KT6201,KT7180,KT7190,KT7192,KT306,KT3091,KT201,KT30 2,KT303,KT304,KT8030;漳州科达:MT87,MT9030,DM6266,KT26B,VC3266L,DT303,KT202B,KT3288,MT486,266,266D266F,266C,KT55,KT317,KT902C,IAC-C,3211D,KT57A,KT57B,KT56,KT56,DT261,KT30B,KT33B,DT831B+,KT830L,KT9805,KT820B,KT820D,DY830B,DT9205A;优利德数字万用表:UT10A,UT12A,UT12B,UT15A,UT15C,UT30A,UT30B,UT30C,UT30D,UT30F,UT33A,UT33B,UT33C,UT 33D,UT39A,UT39B,UT39C,UT39E,UT51,UT52,UT53,UT54,UT55,UT56,UT57,UT50A,UT50B,UT50C,UT50D,UT50E,UT58A,UT58B,UT58C,UT58D,UT58E,UT60A,UT60B,UT60C,UT6 0D,UT60E,UT60F,UT60G,UT60H,UT61A,UT61B,UT61C,UT61D,UT61E,UT61UT70A,UT70B,UT70C,UT 70D,UT71A,UT71B,UT71C,UT71D,UT71E,UT81A,UT81B,UT90A,UT105,UT106,UT107,UT201,UT202,UT203,UT204,UT205,UT206,UT205A,UT206A,UT207,UT208,UT209.UT231,UT232,UT233,UT300A,UT300B,UT301A,UT301B,UT301C,UT302A,UT302C,UT303C,UT303B,UT303A,UT305A,UT3 05B,UT305C,UT321,UT325,UT331,UT351,UT361,UT371,UT501,UT502,UT512,UT511,UT513,UT521,UT522,UT531,UT532,UT601,UT602,UT603,UT713,UT803,UT804,UT2050B,UT2025C,UT2042B,UT2042C,UT2062B,UT2062C,UT2082B,UT2082C,UT2102B,UT2102C, UT3042B,UT3042C,UT3062B,UT3062C,UT3082B,UT3082C,UT3102B,UT3102C,UT1102C,UTD1102C ,UTD1102;珠海伊万:VC3266L+,VC3266A+,VC3266C+,VC3266B,VC3266D,VC3267,VC3267A,VC3267B,VC3267C,VC3210TM,TG3B,VC95;深圳华谊仪表:MS8900,MAS830L,MY60,MY62/63,MY64,MY65,MY68,MS8221,MS8221A,MS8221B,MS8221C,MS8230B,MS8215,MS8217,MS8261,MS8264,MS8265,MS8268,MS8269,MS8226,MS8226T,MS8216,MS8218,MS8050,MS9803R,MY6013A,MY6243,MS8229,MS8209,MS8211,MS8211D,MS2000,MS2000A,MS6450,MS5900,M266,M26C,MS2001,MS2001C,MS2002,MS2002A,M9805G,MS2101,MS2026,MS2026R,MS2138,MS2138R,MS2006B,MS2007B,MS2201,MS2203,MS6500,MS6501,MS6610,MS6100,MS6231,MS6250,MS6700,MS6503,MS6530,MS7212,MS5201,MS5202,MS5209,MS2301,MS6810,MS6811,MS6812,MS6820,MS7221,MS5300,MS3300;上海康海:ZC25B,ZC25A,ZC25H,ZC25-L,ZC11D10,ZC11D-10L,ZC7,ZC29B,ZC8,TG2,TG3B/ZX-1,MY4,3121,3122,3123,DST688,MF47,MF47A,MF47A,MF30,MF50,MF40,MF368,DE360,DE960,YX380TRN,YX360TRD,MF110,MF133,MF15,MF16,YX360TRES,MT88,DT860B,TC-90,TS352A,TS50,MF18,BM860D,DM506S,DM1006S,LG-1000,CL-2000D;杭州仪表厂:MF95,U201,MF141,VC3266C+,VC3266A+,XY-1,8801,XY-3210,上海永红:MG3-1,MG3-2,MG24,MG20,MG21,PG14,MG28,深圳鸿昌滨江电子:HC35B,HC37A,DT9205N,DT9208N,HC6101,HC6105,HC6108,HC710,BM801,BM802,BM803,BM805,BM821A,BM822A,BM823A,BM851,BM852,BM853,BM528,BM6266,DT9973,DT9978,9922B,9925B,9923B,9927B,9928B,BM8300L,DT9300F+,BM8320,BZ2611,CX相序笔,HC711,HC712;深圳山创仪器仪表:A830L,DT9205L,DT9208A+,DT9208L,DT9203L,A6013L,DT9802,DT9801,DT9806,DT9808,SC12B,A3380,DT97,A3383,A910,A901,A902,A903,A908,A3399,DT930F+,A3211D,UT1300B,A625,A963L,A3381,深圳先霸:XB2008A,XB2008C,DT830A,DT9205B,DT850,DT830L,DT830LN1,DT182,XB866,XB868,XB863,南京金川:DS3266L,DS3266A,MF47-6,MF47-8,MF500,MF14,MF10,MD288,杭州富阳新月:MG26,MG27,MG28B,MG27B,DT2700,MG36,BT54A,MG3-1,MG3-2,上海今迈:DDS-11A,DDS12A,DDS-307,DDS-303,DDSJ-308,PHS-25,PHS-2C,PHS-3C, PHS-3CT,PHS-3D,CM-230,RM220,E-20-1C,DJS-1C,DJS-0.1C,16X15,16X1.5,杭州大华:AD16,DH2172,DH9303,DH9330,PC9H,QJ19,QJ23A,QJ23,QJ24,QJ36,QJ42,QJ44,QJ47,QJ57,QS18A,UJ33A,UJ36A,ZX21,ZX25A,ZX32,ZX38,ZX54;上海精创温度表:ST-1,ST-2,ST-4,ST-6,DS-1,DS-2,AT-1,AT-2,MT-1,DT-1,BT-1,WT-1,WT-2,ST-3,MT-2,MT-3,DT-2,DT-3,BT-2,TPM-1,TPM-10,TPM-20,TPM-30,TPM-100,TPM-300,TPM-400,TPM-500,TPM-600,TPM-900,WJL-2000,WJL-6000,HLD-100,CPU-C,CPU-1F,CPU-1G,STC-100,STC-8000,STC-8010,STC-8080,STC-8080A,STC-9000,MTC-2000,MTC-2120,MTC-3000,ETC-100,ETC-200,ETC-300,ETC-400,ETC-500,ETC-600,MTC-800,LTC-200,ATC-800,ATC-1000,STC-200,STC-300,STC-500,ETC-3000,ETC-60,ATC-100,ATC-200,ATC-300,ATC-600,MCTC-100,TC-800,ECB-100,ECB-200,DST-10;上海国光:ZX54,ZX38A,ZX21A,ZX25A,DA16,QS18A,UJ33A,UT31,UJ31A,UJ36A,UJ24,UJ23A,QJ23,QJ44,QJ42,QJ32,QJ36,天水长城电工:SMG2000A,SMG2000B,SMG2000E,SY3000B,SY3000C,SY3001,SMG-2B,SMG-29BS,MG-29,MG-29B,PG-29,PG-29A,ML-12A,ML-160,ML-12B,MG3000B+,MG3000D,武汉康达:KD2675,BH1,KD2675CH1,KD2675DH1,KD2675T,KD2675T,KD2675P,KD2675J,KD2676B1,KD2676DH,KD2676E1,KD2676EH,KD2676F1,KD2676FH,KD2676G1,KD2676GH,DMG2671,DMG2671E,DMG2671G,DMG2671P1,DMG2671T,DER2571B,DER2571PI,DER2571P,KD4190,KD2531,DMG267111,DMG2290B,DMG2290C,KD2101;上海星钻秒表:M504,DM103,DM010,DM010,PC2000A;上海第四电表厂:SI14,SI138,SI47,MF500,MF47,MF50,MF825,MF10,MF14,MF30,MF35,MF368,MF64;上海转速表:LZ-30,LZ-45,LZ-60,LZ-806,LZ804,LZ807,SE1100,SZG-20B,SZG-441C,SZC-04,SZCB-01,北京远东仪表:ZC7,ZC-7,ZC18,ZC-18,ZC8,ZC-8,Q2-V,Q3-V;南京科华仪器仪表:MF47,MF47B,MF47C,MF47D,MF47E,MF47F,MF47T,FJ54B;电缆故障指示器:DS-1DX,DS-JDX,DS-JDG,DS-2DG,DS-JD;深圳华盛昌:DT880H,DT882HDT883H,DT8828H,DT826H,DT998L,DT362C,DT9932FC+,DT9915,DT8850,DT805,DT321S,DT615,DT618,DT3340,DT3341,DT3343,DT3345,DT3347,DT610B,DT612,CO180,DT1300;北京伊麦特:EMT-220AN,EMT-220AL,EMT-220ANL,EMT-220ALC,EMT-220BN,EMT-220BL,EMT-220BNC,EMT-260A,EMT-260B,EMT260C,EMT260D;上海远中:PC27-1,PC27-2H,PC27-3H,PC27-4,PC27-7H,PC27-5H,PC27-6G,ZC-90A,ZC-90B;广州兰泰:DT2350A,DT2350C,DT2350D,DT2350B,CED2600,TM8810,TM8811,CM8820,CM8821,CM8823,CM8822,CM8825F,CM8825FN,CM8828,VM6310,VM6320,VM6360,VM6330,HT6510A,HT6510C,HT6510D,LX9621,LX9626;澳洲新仪器集团/北京吉安诺:6000E/2000E,SIR600E,TM600,TM800,TM1000,TM1500,NM600,NM700,NM900,NM11200,NM150。

几何模型(小学奥数必会6大模型)

几何模型(小学奥数必会6大模型)

模型一:等高模型定义:三角形面积的大小,三角形面积的大小,取决于三角形底和高的乘积。

取决于三角形底和高的乘积。

取决于三角形底和高的乘积。

如果固定三角形的如果固定三角形的底(或高)不变,另一者变大(小)n 倍,三角形的面积也就变大(小)n 倍。

六种基本类型:两个三角形高相等,两个三角形高相等,面积比等于底之比;面积比等于底之比;面积比等于底之比;两个三角形底相等,两个三角形底相等,两个三角形底相等,面积比等于高之比面积比等于高之比公式:DC BD S S ADC ABD ;FCED S S ABC ABD 其中,BC=EF 且两三角形的高相等公式:1 DEFABC S S 夹在一组平行线之间的等积变形公式:1 ABD ABC BCD ACDS S S S等底等高的两个平行四边形面积相等(长方形和正方形可看作特殊的平行四边形)公式:1 CDEFABCD S S三角形面积等于与它等底等高的平行四边形面积的一半公式:ABCDEDC S S 21两个平行四边形高相等,面积比等于他们底的比公式:EFAB S S DEFG ABCD 例题:长方形ABCD 的面积为36cm 2,E 、F 、G 为各边中点,H 为AD 边上任意一点,问阴影部分面积是多少?5.135.41818543681211836212136212121 BEF BEF BEF DGH BFH BEH CDH BCH ABH DGH BFH BEH CDH BCH ABH ABCD CDH DGH BCH BFH ABH BEH CGHDGH CFH BFH BEHAEH S S BF BE S S S S S S S S S S S S S S S S S S S S S S S S S S S S EBAE HCBH 阴影阴影,,,,同理,、如图,连接模型二:相似模型定义:形状相同,大小不相同的两个三角形,一切对应线段的长度成比例的模型。

复盛空压机SA机型参数表

复盛空压机SA机型参数表
380/50
满载电流(A)
139.7
电机重量(Kg)
560
驱动方式
联轴器传动
噪音
W75±3dB(A)
电机重量(Kg)
195
驱动方式
皮带传动
噪音
W70±3dB(A)
含油量(ppm)
W3
后冷却器出口温度(℃)
W环境温度+15
风扇
型号
FZL-500C625S4
风量(m3/min)
130
功率(kW)
0.55
电压(V)/频率(Hz)
380/50
排气量控制
方式
进气容调控制
安全阀设定压力(Mpa)
压缩机排气压力+0.1
380/50
排气量控制方式
进气容调控制
安全阀设定压力(Mpa)
压缩机排气压力+0.1
润滑油量(升)
10
润滑油牌号
复盛双螺杆空压机专用油
外型尺寸
长度(mm)
880
宽度(mm)
720
高度(mm)
1200
净重(Kg)
372
备注
空压机性能测试标准
ASME-PTC-9-1970
运转振动测试标准
VDI-2056
型号
SA-37A
冷却方式
风冷
吸气状态
温度(℃)
20
压力MPa(A)
0.1
相对湿度%
60
定压比热/定容比热
1.4
排气量/排气压力(m3/min/
MPa)
6.2/0.85
主马达
型号
Y225S-4
转速(rpm)
1480
额定功率(kW)

5G SA语音端到端信令面分析与优化方法

5G SA语音端到端信令面分析与优化方法

第54卷 第4期2021年4月通信技术Communications TechnologyVol.54 No.4Apr. 2021文献引用格式:黄智瀛,白锡添,杜安静.5G SA语音端到端信令面分析与优化方法[J].通信技术,2021, 54(4):878-884.HUANG Zhiying,BAI Xitian,DU Anjing.5G SA Voice EPS Fallback & Fast Return Signaling PlaneAnalysis and Optimization Methodology[J].Communications Technology,2021,54(4):878-884.doi:10.3969/j.issn.1002-0802.2021.04.0165G SA语音端到端信令面分析与优化方法*黄智瀛,白锡添,杜安静(中国移动通信集团广东有限公司深圳分公司,广东 深圳 518038)摘 要:在5G SA语音优化过程中,5G终端偶尔会出现打不通、接续时间长以及音质差等问题,严重影响5G用户的语音体验。

5G SA网络语音通话涉及的网元众多,场景复杂,语音问题定位困难。

针对5G SA端到端存在的语音感知问题,从SA语音业务相关的主要指标着手,有效发现和定位网络中存在的问题。

在5G SA路测中,语音业务相关的指标主要有EPS Fallback和快速回落 (Fast Return,FR)的成功率、时延等。

结合实际网络优化经验,详细剖析端到端的信令流程,提出了5G SA语音端到端信令问题分析与优化的方法。

关键词:5G SA语音;EPS FallBack;Fast Return;端到端中图分类号:TN929.5 文献标识码:A 文章编号:1002-0802(2021)-04-0878-075G SA Voice EPS Fallback & Fast Return Signaling Plane Analysis andOptimization MethodologyHUANG Zhiying, BAI Xitian, DU Anjing(Shenzhen Branch, China Mobile Communications Guangdong Co., Ltd., Shenzhen Guangdong 518038, China) Abstract: In the process of 5G SA voice optimization, 5G terminals occasionally encounter problems such as unreachable, long connection time, and poor sound quality, which seriously affect the voice experience of 5G users. 5G SA network voice calls involve many network elements, complex scenarios, and difficulty in locating voice problems. Aiming at the end-to-end voice perception problems of 5G SA, starting from the main indicators related to SA voice services, this paper effectively finds and locates the problems in the network. In 5G SA drive test, voice service-related indicators mainly include the success rate and delay of EPS FB (EPS FallBack) and FR (Fast Return). Combined with the actual network optimization experience, the end-to-end signaling process is analyzed in detail, and a method for the analysis and optimization of 5G SA voice end-to-end signaling problems is proposed.Keywords: 5G SA voice; EPS FallBack; Fast Return; end-to-end0 引 言5G有非独立组网(Non-Stand Alone,NSA)和独立组网(Stand Alone,SA)两种组网方式[1]。

最新带座外球面轴承专题PPT课件

最新带座外球面轴承专题PPT课件

2.10 铸造环形座 (C)
3 带座外球面轴承的特点 3.1 具有自动调心功能
轴承的外径与轴承座内径为 球面配合,两者之间具有自动调 心功能,可补偿因安装误差产生 的轴线不重合及安装底面的变形。
根据使用场合的不同,可采用的配合有H7、 J7及K7配合。正常情况下采用J7配合,高转速 场合建议使用H7配合,重载荷建议使用K7配合。
8)轴承和轴承座的配合性质; 9)周围环境温度的要求(耐高温、低温); 10)周围介质、防尘、防潮、防水等要求; 11)再润滑的重要性; 12)噪音、振动要求; 13)轴承座的强度要求。
6.1 外球面轴承的应用举例

使用要求

使用 范围
与轴固定方法
轴承 密封
紧定螺钉
简单

紧定套 可靠
密封 圈+ 挡圈
3.6 轴承能轻易的锁紧在轴上
轴承锁紧在轴上有四种方式,常用的方 法是锁紧内圈伸长端上等两个紧定螺钉, 也可使用紧定套、锁紧套或偏心套锁紧。 这四种方法都能将轴承轻易锁紧在轴上。
顶丝的结构有齿端型(ST)、W端型(SW)、 凹端型(S)及球端型(SQ)。有的顶丝螺纹 上涂有尼龙涂料以提高其防松性能。
7.4 外球面轴承径向游隙(圆锥孔)
μm
内径(d)
第2组
基本组
第3组
超过 到 上差 下差 上差 下差 上差 下差
10 18 10 25
18
33
25 45
18 24 12 28
20
36
28 48
24 30 12 28
23
41
30 53
30 40 13 33
28
46
40 64
40 50 14 36
相关主题
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
1 10 100
1 0.1
20µs PULSE WIDTH TJ = 150 °C
1 10 100
VDS , Drain-to-Source Voltage (V)
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
PD- 91651C
FB180SA10
HEXFET® Power MOSFET
l l l l l l l l
Fully Isolated Package Easy to Use and Parallel Very Low On-Resistance Dynamic dv/dt Rating Fully Avalanche Rated Simple Drive Requirements Low Drain to Case Capacitance Low Internal Inductance
Min. Typ. Max. Units
Conditions MOSFET symbol ––– ––– 180 showing the A integral reverse ––– ––– 720 p-n junction diode. ––– ––– 1.3 V TJ = 25°C, IS = 180A, VGS = 0V ––– 300 450 ns TJ = 25°C, IF = 180A ––– 2.6 3.9 µC di/dt = 100A/µs Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
2.0
100
1.5
TJ = 25 ° C
1.0
10
0.5
1 4 5 6 7
V DS = 25V 20µs PULSE WIDTH 8 9 10
0.0 -60 -40 -20
VGS = 10V
0 20 40 60 80 100 120 140 160
VGS , Gate-to-Source Voltage (V)
S O T -22 7
Absolute Maximum Ratings
Parameter
ID @ TC = 25°C ID @ TC = 100°C IDM PD @TC = 25°C VGS EAS IAR EAR dv/dt TJ TSTG VISO Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Insulation Withstand Voltage (AC-RMS) Mounting torque, M4 srew
TJ , Junction Temperature( ° C)
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature

3
FB180SA10
20000
C, Capacitance (pF)
15
Ciss
10000
ቤተ መጻሕፍቲ ባይዱ
10
Coss
5000
Crss
5
0 1 10 100
0 0 50 100 150 200
FOR TEST CIRCUIT SEE FIGURE 13
250 300 350 400
VDS , Drain-to-Source Voltage (V)
Q G , Total Gate Charge (nC)
Max.
180 120 720 480 2.7 ± 20 700 180 48 5.7 -55 to + 150 2.5 1.3
Units
A W W/°C V mJ A mJ V/ns °C kV N•m
Thermal Resistance
Parameter
RqJC RqCS Junction-to-Case Case-to-Sink, Flat, Greased Surface
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
1000
10000
ISD , Reverse Drain Current (A)
Typ.
––– 0.05
Max.
0.26 –––
Units
°C/W
1

2/1/99
FB180SA10
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter Drain-to-Source Breakdown Voltage DV(BR)DSS/DTJ Breakdown Voltage Temp. Coefficient RDS(on) Static Drain-to-Source On-Resistance VGS(th) Gate Threshold Voltage gfs Forward Transconductance V(BR)DSS IDSS IGSS Qg Qgs Qgd td(on) tr td(off) tf Ls Ciss Coss Crss Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Internal Source Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. 100 ––– ––– 2.0 93 ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– Typ. Max. Units Conditions ––– ––– V VGS = 0V, ID = 250µA 0.093 ––– V/°C Reference to 25°C, ID = 1mA ––– 0.0065 W VGS = 10V, ID = 108A ––– 4.0 V VDS = VGS, ID = 250µA ––– ––– S VDS = 25V, ID = 108A ––– 50 VDS = 100V, VGS = 0V µA ––– 500 VDS = 80V, VGS = 0V, TJ = 125°C ––– 200 VGS = 20V nA ––– -200 VGS = -20V 250 380 ID = 180A 40 60 nC VDS = 80V 110 165 VGS = 10.0V, See Fig. 6 and 13 45 ––– VDD = 50V 351 ––– ID = 180A ns 181 ––– RG = 2.0W (Internal) 335 ––– RD = 0.27W See Fig. 10 , 5.0 ––– nH Between lead, and center of die contact ––– 10700 ––– VGS = 0V ––– 2800 ––– pF VDS = 25V ––– 1300 ––– ƒ = 1.0MHz, See Fig. 5
Fig 2. Typical Output Characteristics
1000
2.5
TJ = 150 ° C
R DS(on) , Drain-to-Source On Resistance (Normalized)
ID = 180A
I D , Drain-to-Source Current (A)
15000
VGS , Gate-to-Source Voltage (V)
VGS = Ciss = Crss = Coss =
0V, f = 1MHz Cgs + Cgd , Cds SHORTED Cgd Cds + Cgd
20
ID = 180 A VDS = 80V VDS = 50V VDS = 20V
Source-Drain Ratings and Characteristics
IS
ISM
V SD t rr Qrr ton
Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time
D
VDSS = 100V RDS(on) = 0.0065W
相关文档
最新文档