UTC TL074C中文资料
CC4H-4S中文资料
Multiport Analog Modem CardBenefits• High-density , V .92 connections • V .34/33.6K Super G3 fax with Error Correction Mode • Supports leading remote access and fax software • Universal PCI and PCI ExpressThe MultiModem ® ISI server card is ideal for small- to mid-sized companies requiring analog dial-up remote access or a dedicated fax server solution. It provides up to eight built-in V .92/56K modems for cost-effective,high-density , server-based remote access. The MultiModem ISI server card also offers V .34/33.6K Super G3 fax and Error Correction Mode, that can reduce fax transmission time by more than half when compared to traditional fax modems.Features• Four or eight integrated V .92/56K modems• V .92/56K download speeds and 48K upload speeds when connecting with V .92 servers • Class 1.0 and Class 2.1 faxing at speeds to V .34/33.6K bps (Super G3)• Error Correction Mode (ECM) provides fast and reliable fax transmissions • V .44 compression improves data throughput rates • U.S. Caller ID reporting• Sustained data rates to 460.8K per port • Phone cables included• Compatible with Windows ® 2000/XP/2003/Vista/2008 (32-bit/64-bit) and Linux • Up to 4 cards per server• Remote configuration for centralized setup and mangement • 3.3V and 5V Universal PCI or PCI Express models • Compatible with PCI-X slot (Universal PCI models)• Flash memory for easy updates • T wo-year warrantyMultiModem ®ISIWorld Headquarters Tel: (763) 785-3500 (800) EMEA Headquarters Multi-Tech Systems (EMEA)United KingdomTel: +(44) 118-959 7774Multi-Tech Systems (EMEA) FranceTel: +(33) 1 49 19 22 06HighlightsCost-Effective & Scalable. The MultiModem ISI server card provides four or eight dial-up sessions using only one server slot. When demand exceeds one modem card, you can simply add up to three additional cards.V.92 Dial-out Connections. The MultiModem ISI server card supports V .92/56K dial-out and V .34/33.6K dial-inconnections. With V .92 dial-out, you can achieve an upload speed of 48K bps (30% increase over V .90 modems).Enhanced Fax Features. The MultiModem ISI server card supports V .34 fax and Error Correction Mode providingsignificant performance and reliability enhancements over previous fax standards. V .34 sends and receives faxes at speeds up to 33.6K, more than double the speed of the V .17/14.4K fax standard. Error Correction Mode adds reliablility while increasing performance of faxtransmissions. Together these enhancements increase the performance of the MultiModem ISI server card to levels previously only found in more expensive dedicated fax boards and machines.V.44 Compression. V .44 compression standard improves V .42bis data compression anywhere from 20 to 60%, up to as much as 200% for certain types of highly compressible data. This compression technique enables data throughput rates of higher than 300K bps.Simplify Remote Access. The fully-integrated MultiModem ISI server card is easy to set up and manage. You only have to connect the phone lines. There are no external modems and power cords to hassle with; plus it saves back office space since the modems are on the prehensive Service and Support. The Multi-Techcommitment to service means we provide a two-year product warranty and service that includes free telephone technical support, 24-hour web site and ftp support.Ordering InformationProductDescriptionRegion ISI5634UPCI/8 V .92, 8-Modem Card - Universal PCI Global ISI5634UPCI/4 V .92, 4-Modem Card - Universal PCI Global ISI9234PCIE/8 V .92, 8-Modem Card - PCI Express Global ISI9234PCIE/4V .92, 4-Modem Card - PCI ExpressGlobalSpecificationsModemData: V .92, V .90, enhanced V .34, V .32bis, V .22bis Error Correction: V .42, MNP Class 3 & 4Data Compression: V .44, V .42bis, MNP Class 5FaxStandards: V .34, V .17, V .29, V .27ter, V .21, T.30, T.30Annex A, T.30 Annex F , T.31, T.31 Annex B, T.32 Annex C, TR29.2 Class 2 RecommendationRates: 33.6K, 31.2K, 28.8K, 26.4K, 24K, 21.6K, 19.2K, 16.8K, 14.4K, 12K, 9600, 7200, 4800, 2400, 300 bps Error Correction: ECMCompression: MH (T.4), MR (T.4), & MMR (T.6)Conversion: Real time (on-the-fly) compression conversionCommands: Class 1, 2, 1.0, 2.0, 2.1Bus Type3.3V & 5V Universal PCI or PCI Express (x1)Operating System SupportWindows 2000/XP/2003/Vista/2008 (32-bit/64-bit) & LinuxCablingFan out cable with 1 or 2 RJ45 connectors & 4 or 8 RJ11 connectorsPhysical DescriptionUniversal PCI Models:13.87" L × 4.97" W; 8.7 oz (35.2 cm × 12.6 cm; 247 g)PCI Express Models:13.87" L × 4.97" W; 8.5 oz (35.2 cm × 12.6 cm; 241 g)Operating EnvironmentTemperature Range: +23° to +140° F (-5° to +60° C)ApprovalsCE MarkEMC: FCC Part 15 Class B, EN 55022, EN 55024Safety: UL/cUL 60950-1, EN 60950-1, AS/NZS 60950:2000, CCCTelecom: 47CFR Part 68, CS03, TBR21Other countries also includedCopyright © 2008 by Multi-Tech Systems, Inc. All rights reserved.6/08 86000323Made in Mounds View, MN, U.S.A.Features and specifications are subject to change without notice.Trademarks / Registered Trademarks: MultiModem, Multi-Tech, and theMulti-Tech logo: Multi-Tech Systems, Inc. / All other products and technologies are the trademarks or registered trademarks of their respective holders.。
74ACT04中文资料
74ACT04中文资料74ACT04HEX INVERTERApril 1997s HIGH SPEED:t PD =4.5ns (TYP.)at V CC =3.3V sLOW POWER DISSIPATION:I CC =4μA (MAX.)at T A =25o CsCOMPATIBLE WITH TTL OUTPUTS V IH =2V (MIN),V IL =0.8V (MAX)s50?TRANSMISSION LINE DRIVING CAPABILITYsSYMMETRICAL OUTPUT IMPEDANCE:|I OH |=I OL =24mA (MIN)sBALANCED PROPAGATION DELAYS:t PLH ?t PHLsOPERATING VOLTAGE RANGE:V CC (OPR)=4.5V to 5.5VsPIN AND FUNCTION COMPATIBLE WITH 74SERIES 04sIMPROVED LATCH-UP IMMUNITYDESCRIPTIONThe ACT04is an advanced high-speed CMOS HEX INVERTER fabricated with sub-micron silicon gate and double-layer metal wiring C 2MOS technology.It is ideal for low power applications mantaining high speed operation similar toequivalent Bipolar Schottky TTL.The internal circuit is composed of 3stages including buffer output,which enables high noise immunity and stabe output.The device is designed to interface directly High Speed CMOS systems with TTL,NMOS and CMOS output voltage levels.All inputs and outputs are equipped with protection circuits against static discharge,giving them 2KV ESD immunity and transient excess voltage.PIN CONNECTION AND IEC LOGIC SYMBOLSORDER CODES :74ACT04B 74ACT04M M(Micro Package)B (Plastic Package)1/7INPUT AND OUTPUT EQUIVALENT CIRCUITABSOLUTE MAXIMUM RATINGSSymbol ParameterValue Unit V CC Supply Voltage -0.5to +7V V I DC Input Voltage -0.5to V CC +0.5V V O DC Output Voltage -0.5to V CC +0.5V I IK DC Input Diode Curr ent ±20mA I OK DC Output Diode Current ±20mA I O DC Output Current ±50mA I CC or I GND DC V CC or Ground Current±300mAT stg Storage Temperature -65to +150o C T LLead Temperature (10sec)300oCAbsolute Maximum Ratings are those values beyond which damage to the device may occur.Functional operation under these condition is not implied.TRUTH TABLEA Y L H HLPIN DESCRIPTIONPIN No SYMBOL NAME AND FUNCTION 1,3,5,9,11,131A to 6A Data Inputs 2,4,6,8,10,121Y to 6Y Data Oututs 7GND Ground (0V)14V CCPositive Supply VoltageRECOMMENDED OPERATING CONDITIONSSymbol ParameterValue Unit V CC Supply Voltage 4.5to 5.5V V I Input Voltage 0to V CC V V O Output Voltage0to V CC VT op Operating Temperature:-40to +85oCdt/dvInput Rise and Fall Time V CC =4.5to 5.5V (note 1)8ns/V1)V IN from 0.8V to 2.0V74ACT042/7CAPACITIVE CHARACTERISTICSSymbolParameterTest ConditionsValueV CC (V)T A =25oC -40to 85oC Min.Typ.Max.Min.Max.C IN Input Capacitance 5.04pF C PDPower Dissipation Capacitance (note 1)5.037pF1)C PD isdefined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load.(Refer to Test Circuit).Ave rage operating current can be obtained by the following equation.I CC (opr)=C PD ?V CC ?f IN +I CC /n (per circuit)AC ELECTRICAL CHARACTERISTICS (C L =50pF,R L =500?,Input t r =t f =3ns)SymbolParameterTest ConditionValueUnitV CC (V)T A =25oC -40to 85o CMin.Typ.Max.Min.Max.t PLH t PHLPropagation Delay Time(*)1.5 4.57.5 1.08.5ns(*)Voltage range is 5V ±0.5VDC SPECIFICATIONSSymbolParameterTest ConditionsValueUnitV CC (V)T A =25oC -40to 85oC Min.Typ.Max.Min.Max.V IH High Level Input Voltage 4.5V O =0.1V or V CC -0.1V 2.0 1.5 2.0V 5.5 2.01.52.0V IL Low Level Input Voltage 4.5V O =0.1V or V CC -0.1V 1.50.80.8V 5.5 1.50.80.8V OHHigh Level Output Voltage4.5V I (*)=V IH or V ILI O =-50μA 4.4 4.49 4.4V5.5I O =-50μA 5.4 5.495.44.5I O =-24mA 3.86 3.765.5I O =-24mA 4.864.76V OLLow Level Output Voltage4.5V I (*)=V IH or V ILI O =50μA 0.0010.10.1V5.5I O =50mA 0.0010.10.14.5I O =24mA 0.360.445.5I O =24mA0.360.44I I Input Leakage Current 5.5V I =V CC or GND ±0.1±1μA I CCT Max I CC /Input 5.5V I =V CC -2.1V 0.61.5mA I CC Quiescent Supply Current5.5V I =V CC or GND 440mA I OLD Dynamic Output Current (note 1,2)5.5V OLD =1.65V max 75mA I OHDV OHD =3.85V min-75mA1)Maximum test duration 2ms,one output loaded at time2)Incident wave switch ing is guaranteed on transmission lines with impe dances as low as 50?.(*)All outputs loaded.74ACT043/774ACT04TEST CIRCUITC L=50pF or equivalent(includes jig and probe capacitance)R L=R1=500?or equiva lentR T=Z OUT of pulse generator(typically50?)WAVEFORM:PROPAGATION DELAYS(f=1MHz) 4/7DIM.mminch MIN.TYP.MAX.MIN.TYP.MAX.a10.510.020B 1.391.650.0550.065b 0.50.020b10.250.010D 200.787E 8.50.335e 2.540.100e315.240.600F 7.10.280I 5.10.201L 3.30.130Z1.272.540.0500.100P001APlastic DIP14MECHANICAL DATA 74ACT045/7DIM.mm inch MIN.TYP.MAX.MIN.TYP.MAX.A 1.750.068a10.10.20.0030.007a2 1.650.064b 0.350.460.0130.018b10.190.250.0070.010C 0.50.019c145(typ.)D 8.558.750.3360.344E 5.86.20.2280.244e 1.270.050e37.620.300F 3.8 4.00.1490.157G 4.6 5.30.1810.208L 0.5 1.270.0190.050M 0.680.026S8(max.)P013GSO14MECHANICAL DATA74ACT046/774ACT04 Information furnished is believed to be accurate and reliable.However,SGS-THOMSON Microelectronics assumesno responsabilit y for the consequences of use of such information nor for any infringemen t of patents or other rights of third parties which may results from its use.No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectr onics.Specifications mention ed in this publication are subject to change without notice.This publication supersede s and replaces all information previously supplied.SGS-THOMSON Microelectr onics products are not auth orized for use as critical compon ents in life support devices or systems without expre ss written approval of SGS-THOMSON Microelectonics.1997SGS-THOMSON Microelectronics-Printed in Italy-All Rights Reserve dSGS-THOMSON Microelectronics GROUP OF COMPANIESAustralia-Brazil-Canada-China-France-Germany-Hong Kong-Italy-Japan-Korea-Malaysia-Malta-Morocco-The Netherlands-Singapore-Spain-Sweden-Switzerland-Taiwan-Thailand-United Kingdom-U.S.A.7/7。
UTCTL431A中文资料
UTC TL431ALINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.1QW-R103-007,DPROGRAMMABLE PRECISION REFERENCEDESCRIPTIONThe UTC TL431A is a three-terminal adjustable regulatorwith a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between Vref(approximately 2.5V) and 36V with two external resistors. It provides very wide applications, including shunt regulator, series regulator, switching regulator, voltage reference and others.FEATURES*Programmable output Voltage to 36V. *Low dynamic output impedance 0.2Ω.*Sink current capability of 1 to 100mA.*Equivalent full-range temperature coefficient of 50ppm/ °C typical for operation over full rated operating temperature range.SOP-8 1: Cathode 2,3,6,7: Anode 8: Ref.4,5: N.C.TO-92 1: Ref ; 2: Anode; 3: Cathode SOT-89 1: Ref ; 2: Anode; 3: Cathode SOT-23 1: Cathode; 2: Ref; 3: Anode*Pb-free plating product number: TL431AKBLOCK DIAGRAMCATHODE(K)(R)UTC TL431A LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.2QW-R103-007,DABSOLUTE MAXIMUM RATINGS (Operating temperature range applies unless otherwise specified))PARAMETER SYMBOL VALUE UNITCathode VoltageV KA 37 V Cathode Current Range(Continuous) I KA -100 ~ +150 mA Reference Input Current Range Iref -0.05 ~ +10 mA Operating Junction Temperature Tj 150 °C Operating Ambient Temperature Topr -40 ~ +85 °C Storage Temperature TemperatureTstg -65 ~ +150 °CRECOMMENDED OPERATING CONDITIONSPARAMETER SYMBOL MIN TYP MAX UNITCathode Voltage V KA V REF 36 V Cathode CurrentI KA 1 100 mAELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified)PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITReference Input VoltageVrefV KA =V REF ,I KA =10mA2.483 2.495 2.507 VDeviation of reference Input Voltage Over temperature(note 1) ∆Vref/∆T V KA =V REF ,I KA =10mA T MIN <=T A<=T MAX 4.5 17 mV Ratio of Change in Reference Input Voltage to the Change in Cathode Voltage∆Vref /∆V KA I KA =10mA ∆V KA =10V~V REF ∆V KA =36V~10V -1.0 -0.5 -2.7 -2.0 mV/V Reference Input Current Iref I KA =10mA,R1=10k Ω, R2=∞ 1.5 4 µA Deviation of Reference Input Current Over Full Temperature Range ∆Iref/∆T I KA =10mA,R1=10k Ω, R2=∞ T A =full Temperature 0.4 1.2 µA Minimum Cathode Current for Regulation I KA (min) V KA =V REF 0.45 1.0 mA Off-State Cathode Current I KA (OFF) V KA =36V,V REF =0 0.05 1.0 µA Dynamic Impedance Z KA V KA =V REF , I KA =1 to 100mA f ≤1.0kHz0.15 0.5 ΩNote:T MIN =0°C,T MAX =+70°CUTC TL431A LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.3QW-R103-007,DTYPICAL PERFORMANCE CHARACTERISTICS-2-11230255075Cathode Voltage (V)C a t h o d e C u r r e n t (m A )-1123-200400200-2Cathode Voltage (V)C a t h o d e C u r r e n t (m A )5101520253035400-5Cathode Voltage (V) C h a n g e I n R e f e r e n c e I N p u t V o l t a g e (m V )Fig 3 Change in Reference Input Voltage01234567Time (µs)I n p u t a n d O u t p u t V o l t a g e (V )Fig 4 Pulse Response10101010710610510104103I m p e d a n c e (Ω)?Frequency (Hz)Fig 5 Dynamic ImpedanceVs Frequency10203040506070710610510104103Fig 6 Small Signal Voltage Amplification Vs FrequencyV o l t a g e A m p l i f i c a t i o n (d B )Frequency (Hz)UTC TL431ALINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.4QW-R103-007,DTEST CIRCUITV KA=V REF*(1+R1/R2)+I REF*R1V KAV KAFig 7 Test Circuit For V KA =V REF Fig 8 Test Circuit for V KA >= V REF Fig 9 Test Circuit For I KA(OFF)APPLICATION CIRCUITVo=(1+R1/R2)*VREFVo=(1+R1/R2)*V REFFig 10 Shutdown Regulator Fig 11 Output Control of a Three Fig 12Higher-current Shunt Regulator -Terminal Fixed RegulatorUTC TL431AR S =V REF/RCLO =V REF /R SFig 13 Constant-current Sink Fig 14 Current Limiting or Current SourceUTC TL431A LINEAR INTEGRATED CIRCUITUNISONIC TECHNOLOGIES CO., LTD. 5QW-R103-007,D。
Kutai TCS4P125 Automatic Transfer Switch Control U
KUTAI ELECTRONICS INDUSTRY CO., LTD.TCS4P125Automatic Transfer SwitchControl Unit for 3 Phase 4 Wire SystemOperation ManualThree Phase Four Wire 4P 125 Amp Rated Voltage 250 VacPatent Number : U.S. Pat. No. 7,557,683TABLE OF CONTENTSSection PageSECTION 1 : INTRODUCTION1.1 Safety Precautions (3)1.2 Products Overview (3)SECTION 2 : HARDWARE DESCRIPTION2.1 Front Panel (4)2.2 TCS4P125 Dimensions (5)2.3 Panel Cut-Out For The TC-V2 (5)SECTION 3 : FUNCTION DESCRIPTION3.1 General (6)3.2 TDNE Setting (6)3.3 TDEN Setting (6)3.4 TDEC Setting (6)3.5 TDES Setting (6)3.6 TD-OFF Setting (6)3.7 Plant Exerciser (6)3.8 Over / Under Voltage Sensing (6)3.9 Transfer Failure (6)SECTION 4 : OPERATION4.1 General (7)4.2 AUTO Mode (7)4.3 TEST Mode (7)4.4 Programming Mode (7)4.5 AC Voltage Display Adjustment (7)4.6 Specification Summary (7)4.7 System Setting Reference Table (8)SECTION 5 : INSTALLATION INSTRUCTIONS5.1 General (9)5.2 Installation On The Plate (9)5.3 TC-V2 Installation On The Door Panel (10)SECTION 6 : TYPICAL WIRING6.1 TCS4P125 Standard Wiring Diagram (11)SECTION 1 : INTRODUCTION1.1 Safety Precautions (WARNINGS)This manual covers the installation, operation and maintenance of the TCS4P125 Automatic Transfer Switch. It is intended for qualified personal only.1.2 Products OverviewThe TCS4P125 automatic transfer switch consist of two parts the TS4P125 switch and the TC-V2 electronic control unit :1.2.1 TS125 FeaturesThe contacts on the Kutai TS4P125 transfer switch are class PC, this means that it is capable of making and withstanding short circuits but is not intended for breaking short circuit current.●Rated operating Voltage：250 Vac●Rated operating Current：125 Amps●Number of poles：4P●Coil operating voltage：110 / 220 Vac +/- 20%●Compact size, light weight and low powerconsumption.●Electrically operated and mechanically held.●Manufactured using UL 94V-0 plastics.●Adjustable time delay in OFF position whentransferring.●Designed for cell-phone repeaters, and manyindustrial and home ATS applications.1.2.2 TC-V2 Digital ControllerThe TC-V2 digital control unit offers programming flexibility to customize the ATS to different customer requirements.The Controller:●Monitor normal source for full phase over and undervoltages.●Monitor emergency source for single phase overand under voltages.●Normal & emergency source voltage and frequencyparameter display.●TDEN, TDNE, TDEC and TD-OFF real timecountdown display.●Permit testing the transfer switch from the controlpanel.●Permit system testing the transfer switch with orwithout load from the front panel.●Built-in 1 to 4 weeks exerciser timer.●Permit customer plant exerciser test with / withoutload on a preset period.●Safely store customer / factory settings inpermanent memory.●Shows status and failure alarm LED’s on the frontpanel.●No need for PC connection and programmingsoftware. All settings can be made on site.●Controller can be installed next to switch orseparately on an enclosure panel.SECTION 2 : HARDWARE DESCRIPTION 2.1 Front Panel2.2 TCS4P125 Dimensions (Unit : mm)2.3 Panel Cut-Out for the TC-V2 (Unit : mm)SECTION 3 : FUNCTION DESCRIPTION3.1 GeneralOperation of the TCS4P125 electronic control.3.2 TDNE SettingsTDNE provides a time delay when transferring from N ormal to E mergency. Timing begins when the Emergency Source (generator) becomes available. TDNE：Adjustable from 0 to 99 seconds.3.3 TDEN SettingsTDEN provides a time delay when transferring from Emergency to Normal. This permits stabilization of the Normal Power before transferring back to normal. Timing begins when the Normal Power returns and becomes available and steady.TDEN：Adjustable from 0 to 99 seconds.3.4 TDEC SettingsTDEC timer keeps the generator running without load (E ngine C ool-down) after the ATS transfer back to Normal Power. Timing begins when the transfer back to normal is completed.TDEC：Engine Cool-down - from 0 to 99 sec.3.5 TDES SettingTDES is the time delay for Engine Start when the Normal Source voltage is in over or under-voltage (OV or UV). If power return to normal while timing, the TDES timer resets and starts again.TDES：Adjustable from 0 to 30 seconds.3.6 TD-OFF SettingTime Delay on OFF this timer keeps the switch in the center neutral OFF position (completely disengaged) before transferring to the other side. You can preset the switch in Neutral or OFF from 0 to 18 seconds (Normally 2 to 3 sec).TD-OFF：Adjustable from 1 to 20 seconds.3.7 Plant ExerciserThis feature provides for automatic test operation of the generator. The interval is fixed at once per 1 to 4 weeks with a specific test day and time. The exerciser can be set for either testing with load or without load. When the exerciser is activated the exerciser LED (EX) on the right side of display flashes and turns on during the exercise period.3.8 Over / Under Voltage SensingThe TC-V2 constantly monitors normal & emergency power. When power falls outside the programmed voltages this LED turns RED from GREEN and flashing to show OV / UV problems.Adjustable over voltage range：110 - 280 VacOver voltage reset：When voltage falls below 10 Vac of the OV setting.Adjustable under voltage range：80 - 230 VacUnder voltage reset：When voltage exceeds 10 Vac of the UV setting.3.9 Transfer FailureWhen a transfer is made the TS125 communicates it’s position to the TC-V2 controller by using two small internal micro-switches, if this signal is not received, it will try switching 3 more times every 2 seconds or until the connection is made. A flashing light indicator and a “FAIL” signa l displayed an incomplete transfer and that the ATS mechanism or wiring is defective.If the ATS fails, the TC-V2 controller stops all ATS functions and starts’ flashing until the failure is corrected and the control is reset.To reset the transfer fail alarm：1. Manually move the ATS to the correct position.2. Press any button (Auto, Program or Test) on thefront panel to reset the alarm.SECTION 4 : OPERATION4.1 GeneralThis section specifically describes the operation and functional use of the TC-V2 controller.4.2 AUTO ModeIn AUTO the TC-V2 controller automatically transfer and retransfers from source to source as directed by the pre-programmed instructions.In AUTO the controller monitors the condition of both normal and standby power sources providing the logic for the transfer operation.4.3 TEST ModeThe TC-V2 is equipped with a test pushbutton that simulates the loss of normal source. Pushing the Test key the TC-V2 will execute a test on the ATS. The TDES and TDNE programmed time delays will be performed as part of the test. There are two test modes：●Testing with load .●Testing without load4.4 Programming ModeThe TC-V2 controller is fully programmable from the front panel when in the Program Mode. The build-in program buttons have multiple functions：●Real time clock displaying●Programming mode operatingTo enter programming mode, push and hold Program button for 10 seconds. In the first 10 seconds the screen showing internal real time clock and then the word “ Vr 1.0” will appears on the front display window for 2 seconds indicating the version of the software.At this time start a line by line programming sequence. To advance to the next line, push the Program button on the front panel. To change each line’s programming parameters, press the increase (∧) and decrease (∨) buttons. When pressing and releasing the (∧) or (∨) key the displayed parameter can be increased or decreased by one. The parameter will continue to scroll if the (∧) or (∨) button is pressed and not released. Always push the “ Program” button to advance to the next line or until the word “ End” appears on the screen. To immediately end the programming mode, you simply push the “ Program” button for 4 seconds. Then the word “ End” shows on the screen indicating the end of the programming mode.If you like to return to factory settings, stay in programming mode and simultaneously press all 3 buttons (∧), (∨) and Program buttons for 4 seconds. The TC-V2 will now automatically program itself to factory settings and the word “ Au.Po” will appear on the display window.4.5 AC Voltage Display AdjustmentThe TC-V2 controller continually monitors normal & emergency power displaying volts and frequency on the front panel. (The voltage value is calibrated and adjusted at the factory). But when the ATS works on high capacitive or inductive loads the waveform distortion may cause the displayed to have slight differences from the users measuring instrument.You can adjust the display value to equal to the users own instruments, by entering the setting mode to perform adjustment the parameter. Once the adjustment is completed, the voltage sensing value will increase or decrease according to the adjusted value and display it on the screen. The TC-V2 over and under voltage protection follow the adjusted value as the actual system voltage and perform the monitoring according to the new parameter.See Table lines 2, 3, 4, 5 for voltage display setting. 4.6 Specification Summary4.7 System Setting Reference TableSECTION 5 : INSTALLATION INSTRUCTIONS5.1 GeneralThe TC-V2 controller is modular and is designed for installation next to switch or on the front door panel. A longer harness is required for door installation.5.2 Installation On The Plate5.3 Installation On The Door PanelSECTION 6 : TYPICAL WIRING6.1 TCS4P125 Standard Wiring Diagram (110 or 220V)___________________________________________________________________________________________ TCS4P125(TC-V2)11。
JIS H 3300：2009铜及び铜合金の継目无管(日文)
銅及び銅合金の継目無管JIS H 3300：2009平成21年7月20日改正日本工業標準調査会審議（日本規格協会発行）H 3300：2009 _____________________________________________________主 務 大 臣：経済産業大臣 制定：昭和52.5.1 改正：平成21.7.20 官 報 公 示：平成21.7.21 原案作成協力者：日本伸銅協会（〒110-0005 東京都台東区上野1-10-10 うさぎやビル TEL 03-3836-8801）審 議 部 会：日本工業標準調査会 標準部会（部会長 二瓶 好正） 審議専門委員会：非鉄金属技術専門委員会（委員会長 神尾 彰彦）この規格についての意見又は質問は，上記原案作成協力者又は経済産業省産業技術環境局 基準認証ユニット産業基盤標準化推進室（〒100-8901 東京都千代田区霞が関1-3-1 E-mail:qqgcbd@meti.go.jp 又はFAX 03-3580-8625）にご連絡ください。
なお，日本工業規格は，工業標準化法第15条の規定によって，少なくとも5年を経過する日までに日本工業標準調査会の審議に付され，速やかに，確認，改正又は廃止されます。
日本工業標準調査会標準部会 非鉄金属技術専門委員会 構成表氏名所属（委員会長） 神 尾 彰 彦 東京工業大学名誉教授 （委員） 木股 三 株式会社ビスキャス小 出 正 登 日本伸銅協会（三菱マテリアル株式会社） 近 藤 良太郎 社団法人日本電機工業会齋 藤 鐵 哉 独立行政法人物質・材料研究機構 下 村 孝 社団法人日本鉄道車輌工業会 田 中 護 史 財団法人日本船舶技術研究協会 田 村 泰 夫 日本鉱業協会中 野 利 彦 株式会社神戸製鋼所中 村 守 独立行政法人産業技術総合研究所 西 村 尚 東京都立大学名誉教授 林 央 独立行政法人理化学研究所 町 田 克 己 住友金属鉱山株式会社吉 田 英 雄 社団法人軽金属学会（住友軽金属工業株式会社） （専門委員） 野 原 慈 久財団法人日本規格協会H 3300：2009目 次ページ序文 (1)1適用範囲 (1)2引用規格 (1)3用語及び定義 (2)4種類，等級及び記号 (2)5品質 (3)5.1外観 (3)5.2化学成分 (3)5.3機械的性質及び物理的性質の試験項目 (5)5.4機械的性質 (8)5.5結晶粒度 (14)5.6押広げ性 (14)5.7へん平性 (14)5.8非破壊検査特性 (14)5.9導電率 (14)5.10水素ぜい性 (15)5.11時期割れ性 (15)5.12浸出性能 (15)6寸法及びその許容差 (15)6.1寸法の指定 (15)6.2代表寸法 (15)6.3寸法の許容差 (16)6.4直管の曲がりの最大値 (19)7試験 (20)7.1サンプリング (20)7.2化学分析試験 (20)7.3引張試験 (20)7.4硬さ試験 (20)7.5結晶粒度試験 (20)7.6押広げ試験 (21)7.7へん平試験 (21)7.8渦流探傷試験 (21)7.9水圧試験 (22)7.10空圧試験 (22)7.11導電率試験 (22)H 3300：2009 目次ページ7.12水素ぜい化試験 (23)7.13時期割れ試験 (23)7.14浸出性能試験 (23)8検査 (23)9表示 (24)附属書A（参考）銅及び銅合金継目無管の代表寸法 (25)解 説 (28)H 3300：2009まえがきこの規格は，工業標準化法に基づき，日本工業標準調査会の審議を経て，経済産業大臣が改正した日本工業規格である。
TL074
+ 10 Non-inverting Input 3
-
9 Inverting Input 3
8 Output 3
1/11
TL074- TL074A - TL074B
SCHEMATIC DIAGRAM
VCC
N o n- i nve r t in g i np ut
I nver t ing input
1 0 0Ω
200Ω
10 0Ω 30k
Output
1/4 TL074
8.2k
1.3k
35k
1.3k
35k 1 0 0Ω
VC C
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
TL074M, AM, BM TL074I, AI, BI TL074C, AC, BC Unit
VCC Supply voltage - note 1)
± 18
V
Vi
Input Voltage - note 2)
± 15
V
Vid Differential Input Voltage - note 3)
± 30
V
Ptot Power Dissipation
680
mW
Output Short-circuit Duration - note 4)
Input Resistance
TL074 I,M,A C,AI,AM, BC,BI,BM
TL074C
Unit
Min. Typ. Max. Min. Typ. Max.
3 10
3
6
1
3
13
742C043中文资料
元器件交易网8/05/02RSeries 741, 742, 743, 744, 745, 746TechnicalTHICK FILM CHIP RESISTOR ARRAYS* Low cost * High density packaging * Leadless surface mount construction * Tape & reel packaging * Solder coated nickel barrier pads * Isolated and bussed circuits * Convex or Concave Termination OptionsChip Array Product Benefits* High Density Packaging Up to 30% less space per resistor than 0603 chip resistors Up to 75% less space per resistor than 0805 chip resistors * Placement Efficiency Networks require fewer placements than discrete components Larger overall size eases handling compared to discrete components * Low Profile Can be used in PCMCIA cards * Perfect solution for DRAM series termination or Pull up/down signal bias.Electrical and Mechanical SpecificationsSeries PCB Area (in²) Per Resistor Circuit Resistance 70°C Power Type Range Ohms Per Resistor * Maximum Operating Voltage741 742 743 744 745 746.0015 .0037 .0071 .0094 .0058 .0013Isolated Isolated Isolated Isolated Bussed Bussed10 - 1M 10 - 1M 10 - 1M 10 - 1M 33 - 470K 33 - 100K.063W .063W .100W .125W .063W .031W -55°C to +125°C25V 50V 100V 200V 50V 25VResistance ToleranceStandard: ±5% or 0.5 Ohms Whichever is greater Special: ±2% and ±1%Operating Temperature Range Temperature Coefficient (TCR)* Note: Total Rated Package Power equals total number of resistors times rated Power Per ResistorStandard ±200ppm/°CCTS CORPORATION / Around The World, Your Single Source For Excellence元器件交易网8/05/02Package OutlinesConcave Termination -Type CConvex Termination -Type XL P BLT C WBDPT CTermination Area (all places) WAPa rt Code741X043 741X083 741C083 741X163 742C043 742X083 742C083 742C163 743C043 743C083 744C043 744C083 745C101 745C102 745X101 745X102 746X101A# Pads4 8 8 16 4 8 16 4 8 4 8 10 10 10# Res.2 4 4 8 2 4 8 2 4 2 4 8 8 8C ircuitIsolated Isolated Isolated Isolated Isolated Isolated Isolated Isolated Isolated Isolated Isolated Bussed Bussed BussedL1.0 ±0.1 .039 ±.004 2.0 ±0.1 .079 ±.004 3.8 ±0.1 .150 ±.004 1.6 ±0.2 .063 ±.008 3.2 ±0.2 .126 ±.008 6.4 ±0.2 .252 ±.008 2.54 ±0.20 .100 ±.008 5.08 ±0.3 .200 ±.012 2.54 ±0.20 .100 ±.008 5.08 ±0.3 .200 ±.012 6.4 ±0.2 .252 ±.008 6.4 ±0.2 .252 ±.008 3.3 ±0.1 .130 ±.004WP0.65 ±0.10 .026 ±.004TA0.33 ±0.10 .013 ±.004BCDimensions: mm inchD1.0 ±0.1 .039 ±.004 0.50 ±0.1 .020 ±.004 1.6 ±0.1 .063 ±.0040.35 ±0.10 .014 ±.0040.20 ±0.15 .008 ±.006 0.28 ±0.1 .011 ±.0040.20 ±0.10 .008 ±.0040.38 Max. .015 Max.N /A0.45 ±0.10 .020 ±.0040.30 ±0.1 .012 ±.0040.30 ±0.1 .012 ±.0040.30 ±0.1 .012 ±.004 0.4 ±0.15 .016 ±.0061.6 ±0.2 .063 ±.0080.8 ±0.05 .032 ±.0020.6 +0.10 -.25 .024+.004 -.0100.5 ±0.15 .020 ±.0060.3 ±0.20 .012 ±.0080.3 ±0.15 .012 ±.006 0.4 ±0.15 .016 ±.006N /A2.0 ±0.2 .079 ±.0081.27 ±0.05 .050 ±.0020.6 ±0.1 .024 ±.0040.8 ±0.15 .031 ±.0060.4 ±0.2 .016 ±.0080.4 ±0.15 .016 ±.006N /A3.2 ±0.2 .126 ±.008 3.2 ±0.2 .126 ±.008 3.2 ±0.2 .126 ±.008 1.65 ±0.15 .065 ±.0061.27 ±0.05 .050 ±.002 1.27 ±0.05 .050 ±.002 1.27 ±0.05 .050 ±.002 .64 ±0.05 .025 ±.0020.6 ±0.1 .024 ±.004 0.6 ±0.1 .024 ±.004 0.6 ±0.1 .024 ±.004 0.6 ±0.1 .024 ±.0040.9 ±0.15 .035 ±.006 0.6 ±0.15 .024 ±.006 0.9 ±0.15 .035 ±.006 0.35 ±0.05 .014 ±.0020.5 ±0.2 .020 ±.008 0.35 ±0.15 .013 ±.006 0.5 ±0.2 .020 ±.008 0.4 ±0.10 .016 ±.0040.5 ±0.15 .020 ±.006 0.55 ±0.15 .022 ±.006 0.5 ±0.15 .020 ±.006 0.45 ±0.10 .018 ±.004N /AN /A 1.1 ±0.15 .043 ±.006 0.5 ±0.05 .020 ±.002Recommended Land Patternsmm/in.ABNote: Land Patterns for Concave and Convex termination can be the same.CD元器件交易网8/05/02Concave TerminationStandard Packages & Style Codes Convex TerminationTermination Area741X043 2 Resistors 4 Terminations 741X083 4 Resistors 8 TerminationsTermination Area741X163 8 Resistors 16 Terminations741C083 4 Resistors 8 Terminations742C043 2 Resistors 4 Terminations742C083 4 Resistors 8 Terminations 50 mil pitch (1.27mm)742C163 8 Resistors 16 Terminations Common Pad Designator742X083 4 Resistors 8 Terminations 50 mil pitch (1.27mm)743C043 2 Resistors 4 Terminations743C083 4 Resistors 8 Terminations50 mil pitch (1.27mm)8 Resistors 10 Terminations744C043 2 Resistors 4 Terminations 50 mil pitch (1.27mm)PAD 1 Mark (Dot) PAD 1 Mark (Triangle)745X1018 Resistors 10 Terminations745X102744C083 4 Resistors 8 TerminationsNote: The Marking Concept for Convex and Concave Series 745 is Different. 25 mil pitch (.64mm)Eight Bussed Resistors in nearly the same space as one 1206 size chip resistor!745C101 8 Resistors 10 Terminations745C102 8 Resistors 10 Terminations8 Resistors 10 Terminations746X101元器件交易网8/05/02Environmental Performance SpecificationsTest Max. Delta R 741 1.0% 2.5% 5.0% 1.0% 5.0% 2.0% 742-746 1.0% 1.0% 2.0% 1.0% 2.0% 1.0% 5 Cycles -55°C to +125°C 2½ X Rated Working Voltage for 5 Seconds 240 Hours 10% rated load, -10°C to +65°, 90% R.H. 1000 Hours, no load, +125°C 1000 Hours @ 70°C, rated load 10 Seconds @ 260°C solder Isopropyl alcohol, Freon TMC RMA Flux, 230°C, 5 Seconds dip, 95% coverage Test DescriptionThermal Cycle Short Time Overload Moisture Resistance High Temperature Exposure Load Life Resistance to Solder Heat Resistance to Solvents SolderabilityStandard Resistor Values & EIA CodeOhms Ohms 0 10 12 15 18 22 27 33 39 47 51 56 Code Code 000 100 120 150 180 220 270 330 390 470 510 560 Ohms Ohms 68 75 82 100 110 120 150 180 220 270 330 390 Code Code 680 750 820 101 111 121 151 181 221 271 331 391 Ohms Ohms 470 510 560 680 820 1K 1.2K 1.5K 1.8K 2.2K 2.7K 3.3K Code Code 471 511 561 681 821 102 122 152 182 222 272 332 Ohms Ohms 3.9K 4.7K 5.1K 5.6K 6.8K 8.2K 10K 12K 15K 18K 22K 27K Code Code 392 472 512 562 682 822 103 123 153 183 223 273 Ohms Ohms 33K 39K 47K 51K 56K 68K 82K 100K 120K 150K 180K 220K Code Code 333 393 473 513 563 683 823 104 124 154 184 224 Ohms Ohms 270K 330K 390K 470K 510K 560K 680K 820K 1M Code Code 274 334 394 474 514 564 684 824 105Series 745 33 to 470KOhm Series 746 33 to 100KOhmNote: 0 Ohm Jumper Resistance<.05 Ohms Part Code Tolerance = X Part Part Marking is “0"Number Code For Ordering 742X083101JResistor Code 3 digit EIA Shown Above Tolerance J = ±5% (Standard) G=±2% F=±1% X for zero ohm jumperSee Standard Package StylesStyle CodeTape & Reel InformationStyle 741X043 741C083 741X083 10,000 2mm 8mm paper 742C043 741X163 5000 4mm 8mm paper 742C083 742X083 5000 4mm 8mm paper 742C163Notes: No dashes or spaces in the part number. (Example) 742X083101J Marking on the Part Includes Resistor Code Only (741C,742, 743, 744, 745, 746). No Marking on the Part for 741X Series.743C043 743C083 744C043 744C083 745C101 745C102 4000 4mm 12mm plastic 745X101 745X102 4000 4mm 12mm plastic 746X101Parts/Reel Pitch Carrier Width Material4000 4mm 12mm plastic4000 4mm 8mm plastic4000 4mm 12mm plastic4000 4mm 8mm plastic2000 8mm 12mm plastic5000 4mm 8mm paperOrder From:Your local CTS REPRESENTATIVE or CTS Corporation, Resistor/Electrocomponents406 Parr Road, Berne, Indiana 46711 Tel:(260)-589-3111 Fax:(260)-589-3243。
TVR07471中文资料
产品类型 TVR 兴勤压敏电阻器 TVR 系列
本体尺寸 07 10 14 20 Φ 7mm Φ10mm Φ14mm Φ20mm
压敏电压 (V1mA ) 180 241 18x10 V=18V 24x10 V=240V
2 1 0
压敏电压公差 K ±10%
内部控制代码 01~ZZ D W K 包装
可选后辍
S
N
备注：包装及内部控制代码未使用时, 第 11 码为可选后辍。
54
2013.03
产品规格与数据若有变更，恕不另行通知
压敏电阻交易ｗｗｗ．ｕｎｉｔ－ｉｃ．ｃｏｍ
结构与尺寸
S 型 (直脚)
D T
A
Max. 3.0
P W
仰视图
P
d
L
W
(单位：mm) 系列 TVR07-D TVR10-D TVR14-D TVR20-D D 7.5~9.5 12.0~14.0 16.0~18.5 22~24.5 Lmin. 26.5 26.5 26.5 22.5 d 0.6±0.02 0.8±0.02 0.8±0.02 1.0±0.02 P 5±1 7.5±1 7.5±1 10±1 Amax. 12.5 17.5 21.5 28.5
请见电气特性表
Tmax.
W
F 型 (Y型引脚)
D T
Max.3.0
A
MAX 30
0
P
C d
(单位：mm) 系列 TVR07-D TVR10-D TVR14-D TVR20-D D 7.5~9.5 12.0~14.0 16.0~18.5 22~24.5 Cmin. 20 20 20 20 d 0.6±0.02 0.8±0.02 0.8±0.02 1.0±0.02 P 5±1 7.5±1 7.5±1 10±1 Amax. 12.5 18.0 22.0 29.0
TL074IDT,TL074IDT,TL074IDT,TL074ACDT,TL074ACDT,TL074ACDT,TL074IYDT,TL074IYDT, 规格书,Datasheet 资料
This is information on a product in full production.July 2012Doc ID 2297 Rev 41/16TL074Low noise JFET quad operational amplifierDatasheet — production dataFeatures■Wide common-mode (up to V CC +) and differential voltage range ■Low input bias and offset current ■Low noise e n = 15nV/ √Hz (typ)■Output short-circuit protection■High input impedance JFET input stage ■Low harmonic distortion : 0.01% (typical)■Internal frequency compensation ■Latch up free operation ■High slew rate: 16V/µs (typical)DescriptionThe TL074, TL074A and TL074B are high-speed JFET input single operational amplifiers. Each of these JFET input operational amplifiersincorporates well matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit.The devices feature high slew rates, low input bias and offset currents, and low offset voltage temperature coefficient.Schematic diagram TL0742/16Doc ID 2297 Rev 41 Schematic diagramTL074Absolute maximum ratings and operating conditionsDoc ID 2297 Rev 43/162Absolute maximum ratings and operating conditionsTable 1.Absolute maximum ratingsSymbol ParameterValueUnitTL074I, AI, BITL074C, AC, BC V CC Supply voltage (1)±18V V i Input voltage (2) ±15V V id Differential input voltage (3)±30V P tot Power dissipation680mW R thjaThermal resistance junction to ambient (4)(5)DIP14SO-1480105°C/W R thjcThermal resistance junction to case (4)(5)DIP14SO-143331°C/WOutput short-circuit duration (6)InfiniteT oper Operating free-air temperature range -40 to +1050 to +70°C T stgStorage temperature range -65 to +150°C ESDHBM: human body model (7)1kV MM: machine model (8)200V CDM: charged device model (9)1.5kV1.All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltageswhere the zero reference level is the midpoint between V CC + and V CC -.2.The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less.3.Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.4.Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuits on allamplifiers.5.Rth are typical values.6.The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensurethat the dissipation rating is not exceeded.7.Human body model: 100pF discharged through a 1.5k Ω resistor between two pins of the device, done for all couples of pincombinations with other pins floating.8.Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two pins of the devicewith no external series resistor (internal resistor < 5Ω), done for all couples of pin combinations with other pins floating.9.Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly tothe ground.Table 2.Operating conditionsSymbol ParameterTL074I, AI, BITL074C, AC, BCUnit V CC Supply voltage6 to 36VT operOperating free-air temperature range-40 to +1050 to +70°C3 ElectricalcharacteristicsTable 3.V CC = ±15V, T amb = +25°C (unless otherwise specified)Symbol Parameter TL074I,AC,AI, BC,BI TL074CUnit Min.Typ.Max.Min.Typ.Max.V io Input offset voltage (R s= 50Ω)T amb = +25°C TL074TL074ATL074BT min≤T amb≤T max TL074TL074ATL074B3311063137531013mVDV io Input offset voltage drift1010µV/°CI io Input offset currentT amb = +25°CT min≤T amb≤T max51004510010pAnAI ib Input bias current -note (1)T amb = +25°CT min≤T amb≤T max20200203020020pAnAA vd Large signal voltage gain R L= 2kΩ, V o=±10VT amb = +25°CT min≤T amb≤T max50252002515200V/mVSVR Supply voltage rejection ratio (R S= 50Ω)T amb = +25°CT min≤T amb≤T max808086707086dBI CC Supply current, no loadT amb = +25°CT min≤T amb≤T max1.42.52.51.42.52.5mAV icm Input common mode voltage range ±11+15-12±11+15-12VCMR Common mode rejection ratio (R S= 50Ω)T amb = +25°CT min≤T amb≤T max808086707086dBI os Output short-circuit currentT amb = +25°CT min≤T amb≤T max10104060601010406060mA±V opp Output voltage swingT amb = +25°C RL = 2kΩRL = 10kΩT min≤ T amb≤T max RL = 2kΩRL = 10kΩ101210121213.5101210121213.5VSR Slew rateV in = 10V, R L = 2kΩ, C L = 100pF, unity gain813813V/µs4/16Doc ID 2297 Rev 4Doc ID 2297 Rev 45/16t rRise timeV in = 20mV , R L = 2k Ω, C L = 100pF , unity gain0.10.1µsK ovOvershootV in = 20mV , R L = 2k Ω, C L = 100pF , unity gain1010%GBP Gain bandwidth product V in = 10mV , R L = 2k Ω, C L = 100pF , = 100kHz 2323MHz R i Input resistance10121012ΩTHDTotal harmonic distortionf= 1kHz, R L = 2k Ω,C L = 100pF , A v = 20dB, V o = 2V pp )0.010.01%e n Equivalent input noise voltage R S = 100Ω,f = 1kHz 1515∅m Phase margin 4545degreesV o1/V o2Channel separation A v = 100120120dB1.The input bias currents are junction leakage currents which approximately double for every 10°C increase in the junctiontemperature.Table 3.V CC = ±15V, T amb = +25°C (unless otherwise specified) (continued)SymbolParameterTL074I,AC,AI, BC,BITL074CUnitMin.Typ.Max.Min.Typ.Max.nV Hz -----------Figure 2.Maximum peak-to-peak outputFigure 3.Maximum peak-to-peak outputFigure 4.Maximum peak-to-peak output Figure 5.Maximum peak-to-peak outputFigure 6.Maximum peak-to-peak output Figure 7.Maximum peak-to-peak output6/16Doc ID 2297 Rev 4Doc ID 2297 Rev 47/16Figure 8.Input bias current versus free air temperatureFigure 9.Large signal differential voltage amplification versus free airFigure rge signal differential voltageamplification and phase shift Figure 11.Total power dissipation versus freeair temperatureFigure 12.Supply current per amplifier versus Figure mon mode rejection ratioFigure 14.Voltage follower large signal pulseFigure 15.Output voltage versus elapsed timeFigure 16.Equivalent input noise voltage8/16Doc ID 2297 Rev 4TL074Parameter measurement information 4 Parameter measurement informationDoc ID 2297 Rev 49/16Typical applications TL07410/16Doc ID 2297 Rev 45 Typical applicationsTL074Typical applicationsDoc ID 2297 Rev 411/16Figure 22.Output AFigure 23.Output BSECOND ORDER BANDPASS FILTER fo = 100kHz; Q = 30; Gain = 16CASCADED BANDPASS FILTER fo = 100kHz; Q = 69; Gain = 16Package information TL07412/16Doc ID 2297 Rev 46 Package informationIn order to meet environmental requirements, ST offers these devices in different grades ofECOP ACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: . ECOPACK is an ST trademark.6.1 DIP14 package informationTable 4.DIP14 package mechanical dataRef.MillimetersInches Min.Typ.Max.Min.Typ.Max.a10.510.020B 1.391.650.0550.065b 0.50.020b10.250.010D 200.787E 8.50.335e 2.540.100e315.240.600F 7.10.280I 5.10.201L 3.30.130Z1.272.540.0500.100TL074Package informationDoc ID 2297 Rev 413/166.2 SO-14 package informationPackage information TL074Table 5.SO-14 mechanical datammDim.Min.Typ.Max.A 1.35 1.75A1 0.100.25A2 1.10 1.65B 0.330.51C 0.190.25D 8.558.75E 3.80 4.00e 1.27H 5.80 6.20h0.250.50L 0.40 1.27K 08e0.40ddd0.1014/16Doc ID 2297 Rev 4TL074Ordering informationDoc ID 2297 Rev 415/167 Ordering information8 Revision historyTable 6.Order codesOrder code TemperaturerangePackagePackingMarking TL074IN TL074AIN TL074BIN -40°C, +105°C DIP14TubeTL074IN TL074AIN TL074BIN TL074ID/IDT TL074AID/AIDT TL074BID/BIDT SO-14Tube or tape & reel 074I 074AI 074BI TL074IYDT (1)TL074AIYDT (1)TL074BIYDT (1)1.Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screeningaccording to AEC Q001 & Q 002 or equivalent are on-going.SO-14Tube or tape & reel074IY 074AIY 074BIY TL074CN TL074ACN TL074BCN 0°C, +70°CDIP14TubeTL074CN TL074ACN TL074BCN TL074CD/CDT TL074ACD/ACDT TL074BCD/BCDTSO-14Tube or tape & reel074C 074AC 074BCTable 7.Document revision historyDate RevisionChanges28-Mar-20011Initial release.30-Jul-20072Added values for R thja , R thjc and ESD in T able 1: Absolute maximumratings .Added Table 2: Operating conditions .Expanded T able 6: Order codes .Format update.07-Jul-20083Removed information concerning military temperature ranges (TL074Mx, TL074AMx, TL074BMx).Added automotive grade order codes in Table 6: Order codes .04-Jul-20124Removed commercial types TL074IYD, TL074AIYD, TL074BIYD.Updated Table 6: Order codes .TL074Please Read Carefully:Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.All ST products are sold pursuant to ST’s terms and conditions of sale.Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.© 2012 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America16/16Doc ID 2297 Rev 4。
TL074CPWRG4中文资料
PACKAGING INFORMATIONOrderableDevice Status (1)Package TypePackage DrawingPins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)8102304HA OBSOLETE 10TBD Call TI Call TI81023052A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type8102305HA ACTIVE CFP U 101TBD A42SNPB N /A for Pkg Type 8102305PA ACTIVE CDIP JG 81TBD A42SNPB N /A for Pkg Type 81023062A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type8102306CA ACTIVE CDIP J 141TBD A42SNPB N /A for Pkg Type 8102306DA ACTIVE CFP W 141TBD A42SNPB N /A for Pkg Type JM38510/11905BPA ACTIVE CDIP JG 81TBD A42SNPB N /A for Pkg Type JM38510/11906BCAOBSOLETE CDIP J 14TBD Call TI Call TITL071ACD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071ACDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071ACDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071ACDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071ACDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071ACDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071ACP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL071ACPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL071BCD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071BCDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071BCDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071BCDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071BCDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071BCDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071BCP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL071BCPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL071CD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071CDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071CDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071CDRACTIVESOICD82500Green (RoHS &CU NIPDAULevel-1-260C-UNLIM12-Oct-2007Orderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)no Sb/Br)TL071CDRE4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL071CDRG4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL071CP ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL071CPE4ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL071CPSR ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL071CPSRE4ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL071CPSRG4ACTIVE SO PS82000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071CPWLE OBSOLETE TSSOP PW8TBD Call TI Call TI TL071ID ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL071IDE4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL071IDG4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL071IDR ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL071IDRE4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL071IDRG4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL071IJG OBSOLETE CDIP JG8TBD Call TI Call TITL071IP ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL071IPE4ACTIVE PDIP P850Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL071MFKB OBSOLETE LCCC FK20TBD Call TI Call TITL071MJG OBSOLETE CDIP JG8TBD Call TI Call TITL071MJGB OBSOLETE CDIP JG8TBD Call TI Call TITL072ACD ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL072ACDE4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL072ACDG4ACTIVE SOIC D875Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL072ACDR ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL072ACDRE4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL072ACDRG4ACTIVE SOIC D82500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072ACJG OBSOLETE CDIP JG8TBD Call TI Call TITL072ACP ACTIVE PDIP P850Pb-Free CU NIPDAU N/A for Pkg Type 12-Oct-2007OrderableDeviceStatus (1)Package Type Package DrawingPins Package QtyEco Plan (2)Lead/Ball FinishMSL Peak Temp (3)(RoHS)TL072ACPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL072ACPSR ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072ACPSRE4ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072ACPSRG4ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072BCD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072BCDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072BCDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072BCDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072BCDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072BCDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072BCP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL072BCPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL072CD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL072CPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL072CPSLE OBSOLETE SO PS 8TBDCall TI Call TITL072CPSR ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CPSRE4ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CPSRG4ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CPWR ACTIVE TSSOP PW 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072CPWRE4ACTIVETSSOPPW82000Green (RoHS &CU NIPDAULevel-1-260C-UNLIM12-Oct-2007OrderableDeviceStatus (1)Package Type Package Drawing Pins Package QtyEco Plan (2)Lead/Ball FinishMSL Peak Temp (3)no Sb/Br)TL072CPWRG4ACTIVE TSSOP PW 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072ID ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072IDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072IDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072IDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072IDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072IDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL072IP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL072IPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAUN /A for Pkg TypeTL072MFKB ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type TL072MJG ACTIVE CDIP JG 81TBD A42SNPB N /A for Pkg Type TL072MJGB ACTIVE CDIP JG 81TBD A42SNPB N /A for Pkg Type TL072MUB ACTIVE CFP U 101TBD A42SNPB N /A for Pkg Type TL074ACD ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074ACDE4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074ACDG4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074ACDR ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074ACDRE4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074ACDRG4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074ACJ OBSOLETE CDIP J 14TBD Call TI Call TITL074ACN ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL074ACNE4ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL074ACNSR ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074ACNSRE4ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074ACNSRG4ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074BCD ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074BCDE4ACTIVESOICD1450Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIM12-Oct-2007OrderableDevice Status (1)Package Type Package DrawingPins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)TL074BCDG4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074BCDR ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074BCDRE4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074BCDRG4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074BCN ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL074BCNE4ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL074BCNSR ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074BCNSRE4ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074BCNSRG4ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CD ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CDE4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CDG4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CDR ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CDRE4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CDRG4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CN ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL074CNE4ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL074CNSR ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CNSRE4ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CNSRG4ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CPW ACTIVE TSSOP PW 1490Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CPWE4ACTIVE TSSOP PW 1490Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CPWG4ACTIVE TSSOP PW 1490Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CPWLE OBSOLETE TSSOP PW 14TBDCall TI Call TITL074CPWR ACTIVE TSSOP PW 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074CPWRE4ACTIVETSSOPPW142000Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIM12-Oct-2007Orderable Device Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)TL074CPWRG4ACTIVE TSSOP PW 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074ID ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074IDE4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074IDG4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074IDR ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074IDRE4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074IDRG4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL074IJ OBSOLETE CDIP J 14TBD Call TI Call TITL074IN ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL074INE4ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAUN /A for Pkg TypeTL074MFK ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type TL074MFKB ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type TL074MJ ACTIVE CDIP J 141TBD A42SNPB N /A for Pkg Type TL074MJB ACTIVE CDIP J 141TBD A42SNPB N /A for Pkg Type TL074MWBACTIVECFPW141TBDA42SNPBN /A for Pkg Type(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device willbe discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.12-Oct-2007In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annualbasis.12-Oct-2007TAPE AND REEL BOXINFORMATIONDevicePackage Pins SiteReel Diameter (mm)Reel Width (mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant TL071ACDR D 8SITE 2733012 6.4 5.2 2.1812Q1TL071BCDR D 8SITE 2733012 6.4 5.2 2.1812Q1TL071CDR D 8SITE 2733012 6.4 5.2 2.1812Q1TL071CDR D 8SITE 4133012 6.4 5.2 2.1812Q1TL071CPSR PS 8SITE 41330168.2 6.6 2.51216Q1TL071IDR D 8SITE 2733012 6.4 5.2 2.1812Q1TL072ACDR D 8SITE 2733012 6.4 5.2 2.1812Q1TL072ACPSR PS 8SITE 41330168.2 6.6 2.51216Q1TL072BCDR D 8SITE 2733012 6.4 5.2 2.1812Q1TL072CDR D 8SITE 2733012 6.4 5.2 2.1812Q1TL072CDR D 8SITE 4133012 6.4 5.2 2.1812Q1TL072CPSR PS 8SITE 41330168.2 6.6 2.51216Q1TL072CPWR PW 8SITE 41330127.0 3.6 1.6812Q1TL072IDR D 8SITE 2733012 6.4 5.2 2.1812Q1TL072IDR D 8SITE 4133012 6.4 5.2 2.1812Q1TL074ACDR D 14SITE 2733016 6.59.0 2.1816Q1TL074ACNSR NS 14SITE 41330168.210.5 2.51216Q1TL074BCDR D 14SITE 2733016 6.59.0 2.1816Q1TL074BCNSRNS14SITE 41330168.210.52.51216Q14-Oct-2007DevicePackage Pins SiteReel Diameter (mm)Reel Width (mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant TL074CDR D 14SITE 2733016 6.59.0 2.1816Q1TL074CNSR NS 14SITE 41330168.210.5 2.51216Q1TL074CPWR PW 14SITE 41330127.0 5.6 1.6812Q1TL074IDRD14SITE 27330166.59.02.1816Q1DevicePackagePins Site Length (mm)Width (mm)Height (mm)TL071ACDR D 8SITE 27342.9336.620.64TL071BCDR D 8SITE 27342.9336.620.64TL071CDR D 8SITE 27342.9336.620.64TL071CDR D 8SITE 41346.0346.029.0TL071CPSR PS 8SITE 41346.0346.033.0TL071IDR D 8SITE 27342.9336.620.64TL072ACDR D 8SITE 27342.9336.620.64TL072ACPSR PS 8SITE 41346.0346.033.0TL072BCDR D 8SITE 27342.9336.620.64TL072CDR D 8SITE 27342.9336.620.64TL072CDR D 8SITE 41346.0346.029.0TL072CPSR PS 8SITE 41346.0346.033.0TL072CPWRPW8SITE 41346.0346.029.04-Oct-2007DevicePackagePins Site Length (mm)Width (mm)Height (mm)TL072IDR D 8SITE 27342.9336.620.64TL072IDR D 8SITE 41346.0346.029.0TL074ACDR D 14SITE 27342.9336.628.58TL074ACNSR NS 14SITE 41346.0346.033.0TL074BCDR D 14SITE 27342.9336.628.58TL074BCNSR NS 14SITE 41346.0346.033.0TL074CDR D 14SITE 27342.9336.628.58TL074CNSR NS 14SITE 41346.0346.033.0TL074CPWR PW 14SITE 41346.0346.029.0TL074IDRD14SITE 27342.9336.628.584-Oct-2007元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements,and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current andcomplete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’sstandard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support thiswarranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarilyperformed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products andapplications using TI components.To minimize the risks associated with customer products and applications,customers shouldprovide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,maskwork right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or servicesare rmation published by TI regarding third-party products or services does not constitute a license from TI to use suchproducts or services or a warranty or endorsement e of such information may require a license from a third party underthe patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and isaccompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is anunfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third partiesmay be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or servicevoids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive businesspractice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product wouldreasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreementspecifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramificationsof their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-relatedrequirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding anyapplications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and itsrepresentatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products arespecifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet militaryspecifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade issolely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements inconnection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI productsare designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityRFID Telephony /telephonyLow Power /lpw Video&Imaging /videoWirelessWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。
UTC TL072AC中文资料
UTC TL072LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.1QW-R105-004,BLOW NOISE DUAL J-FET OPERATIONAL AMPLIFIERDESCRIPTIONThe UTC TL072 is a high speed J-FET input dual operational amplifier. It incorporates well matched, high voltage J-FET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.FEATURES*Low power consumption*Wide common-mode (up to v cc + ) and differential voltage range*Low input bias and offset current *Low noise e n = 15nV / Hz (typ) *Output short-circuit protection*High input impedance J-FET input stage *Low harmonic distortion:0.01%(typ) *Internal frequency compensation *Latch up free operation *High slewrate:16V/µs(typ)PIN CONFIGURATIONSOUTPUT 1INVERTING INPUT 1NON-INVERTING INPUT 1Vcc-Vcc+OUTPUT 2INVERTING INPUT 2NON-INVERTING INPUT 2UTC TL072LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.2QW-R105-004,BBLOCK DIAGRAMABSOLUTE MAXIMUM RATINGS (Ta=25°C )PARAMETER SYMBOLVALUEUNITSupply Voltage (note 1)Vcc +-18 V Input Voltage (note 2)Vi +-15 V Differential Input Voltage (note 3) Vid +-30 V Power DissipationPtot 680 mW Output Short-Circuit Duration (Note 4) Infinite Operating Free Air Temperature Range Toper 0 to 70 °C Storage Temperature Range Tstg-65 to 150°CNOTES: 1. All voltage values, except differential voltage, are with respect to the zero reference level(ground) of the supply voltages where the zero reference level is the midpoint between Vcc- and Vcc+.2. The magnitude of the input voltage must never exceed the magnitude of the supply voltageor 15 volts, whichever is less.3. Differential voltages are at the non-inverting input terminal with respect to the inverting inputterminal.4. The output may be shorted to ground or to either supply. Temperature and/or supplyvoltages must be limited to ensure that the dissipation rating is not exceeded.UTC TL072LINEAR INTEGRATED CIRCUIT UTC TL072 C ELECTRICAL CHARACTERISTICS( Vcc=+-15V, Ta=25°C,in the junction temperature.UTC UNISONIC TECHNOLOGIES CO., LTD. 3QW-R105-004,BUTC TL072LINEAR INTEGRATED CIRCUIT UTC TL072 AC ELECTRICAL CHARACTERISTICS( Vcc=+-15V, Ta=25°C,in the junction temperature.UTC UNISONIC TECHNOLOGIES CO., LTD. 4QW-R105-004,BUTC TL072LINEAR INTEGRATED CIRCUIT UTC TL072 BC ELECTRICAL CHARACTERISTICS( Vcc=+- 15V, Ta=25°C,in the junction temperature.UTC UNISONIC TECHNOLOGIES CO., LTD. 5QW-R105-004,BUTC TL072LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD. 6QW-R105-004,BUTC TL072LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD. 7QW-R105-004,BUTC TL072LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD. 8QW-R105-004,BUTC TL072LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.9QW-R105-004,BPARAMETER MEASUREMENT INFORMATION。
si4754c 参数手册
SI4754C 参数手册一、概述SI4754C 是一款高性能的无线电接收器模块，广泛应用于广播接收、无线通信等领域。
该模块具有优良的信号接收能力、低功耗等特点，能够提供高质量的音频输出。
本手册将详细介绍SI4754C 的各项参数和特性，帮助您更好地理解和使用该模块。
二、物理尺寸与重量SI4754C 的物理尺寸为12mm x 12mm x 2mm，重量约为1.5 克。
三、工作电压SI4754C 的工作电压范围为2.7V 至5.5V。
建议使用3.3V 或5V 电源为模块供电。
四、工作温度范围SI4754C 的工作温度范围为-40°C 至+85°C，能够适应大多数应用场景的需求。
五、频率范围SI4754C 的频率范围覆盖了FM 和AM 广播频段，具体取决于不同的国家和地区。
具体频率范围请参考相关数据表或与供应商联系。
六、灵敏度SI4754C 的灵敏度在-106dBm 以上，能够接收微弱的信号，提高接收质量。
七、音频性能参数SI4754C 的音频输出采样率为22.05kHz 或44.1kHz，音频信噪比（SNR）大于等于80dB，失真度小于等于0.2%。
八、电源管理SI4754C 支持低功耗模式，当没有信号输入时，自动进入睡眠模式，降低功耗。
此外，SI4754C 还支持I2C 总线控制，可以通过软件进行配置和控制。
九、数字音频接口参数SI4754C 支持I2S 数字音频接口，采样率为22.05kHz 或44.1kHz，位宽为16 位或24 位。
同时，还支持左右声道独立控制和音频混合输出。
十、特殊功能说明SI4754C 支持自动搜台和手动调谐功能，可以快速找到需要的广播频道。
此外，还支持多种音频输出模式和音量控制，方便用户根据需要进行调整。
十一、引脚配置与功能描述SI4754C 模块共有24 个引脚，以下是各引脚的功能描述：1.VCC：电源正极，为模块提供工作电压。
2.GND：电源负极，接地。
Jofra RTC-700高温参考温度校准器商品说明书
RTC SeriesReference Temperature CalibratorRTC-700Product DescriptionA METEK continues to develop new techniques to improve the performance, accuracy, convenience,and functionality of the popular Jofra calibration products. By doing so, we maintain our position as the leading worldwide manufacturers of temperature dry-block calibrators.We are proud to introduce our new high temperature model RTC (Reference Temperature Calibrator), which is no exception to the above and even more sophisticated than any existing calibrators. Features & ModelsThe RTC offers many new fantastic features such as:⏹ Patented DLC (Dynamic Load Compensation) system for perfect temperature uniformity in the insert.⏹ Unique, intelligent sensors for plug n’ play connection.⏹ USB connector for communication.⏹ Easy-to-read color VGA display with a perfect overview of the actual status.⏹ Intuitive, fast, and user-friendly navigation.⏹ Lightweight and easy to carry around.⏹ New functional carrying case design.⏹ New multi-hole insert kits covering all of the most used sensor sizes.⏹ High profile design and well-known, long lasting Jofra quality.The new RTC calibrator comes in three different models—A, B, and C.⏹ RTC-A reference temperature calibrator.⏹ RTC-B reference temperature calibrator with input for reference sensor, DLC sensor, and sensors-under-test.⏹ RTC-C reference temperature calibrator with input for reference sensor and DLC sensor.Key Features◆High AccuracyDown to ± 0.11°C using the external reference sensor. 4-wire True-Ohm Measurement technology is used.◆Excellent Stability, 0.008°C◆Wide Temperature RangeFrom 33 to 700°C (91 to 1292°F).◆Improved Temperature HomogeneityUnique, active triple-zone block ensures good temperature homogeneity in thecalibration zone.◆DLC (Dynamic Load Compensation)Perfect temperature uniformity in the insert, even when calibrating large sensors or many sensors at a time. (B and C models only.)◆Display Indicator for Temperature UniformityShows the degree of temperature uniformity in the insert when using the new DLCtechnology. (B and C models only.)◆Intelligent Reference SensorsJofra reference sensors are supplied with intelligent plugs, holding the calibration data (coefficients) of the reference sensor. This is a truly plug n’play calibration system.◆USB CommunicationAll RTC calibrators communicate via an easy-to-use USB port.◆Time SavingSuper high-speed cooling.◆EURAMETBest performing dry-block with regard to the EURAMET/cg-13v.01 guideline for thetesting of dry-blocks.DLC –Dynamic Load CompensationTo bring our well documented active dual-zone technology to an even higher level, we have developed the patented DLC system, making it possible to perform top calibration specifications without being affected by the actual load, e.g. many sensors or very big sensors.The RTC-700 adds active triple-zone temperature control.The DLC sensor improves the homogeneity even more, by controlling it not only the well, but inside the insert where the sensors-under-test are placed during calibration. The DLC sensor measures the temperature homogeneity in the insert and provides feedback to the active triple-zone sys-tem, which compensates the temperature difference to a minimum inside the insert. In this way, the DLC function makes the homogeneity indepen-dent of the different loads of the insert, making the RTC the best performing dry-block calibrator on the market when calibrated and tested according to the globally accepted EURAMET/cg-13v.01 guideline for calibration and testing of dryblocks.The DLC system is comprised of a special differential temperature sensor designed especially for the RTC. The sensor is placed in the insert and con-nected to the calibrator. When the DLC function is enabled, the calibrator will automatically equalize the temperature homogeneity inside the insert, along with the normal temperature control and stabilization.SlaveDLCMaster1000.050.100.15Axial Temperature Homogeneity in °CD i s t a n c e t o B o t t o m o f I n s e r t i n m m0.200.25DLC Function On DLC Function O Thermo Sensitive LengthDLC SensorDLC –User AdvantagesCalibrating with the DLC sensor offers the following advantages:1 Calibration of several sensors simultaneously.2 Calibration of thick sensors.3 Gives TSL (Thermo Sensitive Length) independency. It is no longer necessary to know the TLS of the sensor.4 Compensates for sensor production tolerances like the PT100 element being mounted in vari-ous positions in the sensor.5 Trouble free calibration of sensors with PT100 elements up to 60 mm length.6 The DLC indicator proves that the dual-zone is active and functioning well.7 Proves that the calibrator is working perfectly. The DLC value should be very close to 0.00 when the calibrator is loaded with DLC sensor and an external reference sensor.8 Together with the stability indication, the DLC indicates when the calibration values can be read.Axial temperature curves for an RTC calibrator with and without the DLC functionality activated.Unique Triple Zone Temperature PerformanceThe RTC series of calibrators provide precision temperature calibration of sensors, what-ever the type or format. This is accomplished through an innovative active triple-zone heat-ing technology.With the RTC-700’s active triple-zone heating technology, each heating zone is indepen-dently controlled for precision temperature calibration. The homogeneity in the lower part is close to that of a laboratory liquid bath. The lower zone ensures optimum heat dissipa-tion throughout the entire calibration zone. The upper zone compensates for heat loss from the sensor-under-test, and from the open top. This design also eliminates the need for extra insulation of sensors-under-test and makes it possible to calibrate liquid-filled and other mechanical sensors.USB and LAN/Ethernet ConnectionA USB connection facilitates easy communication with JofraCal. The USB connection also sup-ports easy download of future firmware upgrades. The USB connection provides fast and easy access to all laptops without the need of RS-232 to USB converters.Future-proof through e.g. a flash capability for easy firmware upgrades as well as already integrat-ed LAN communication, SD-card slot, and USB host connectors for future use.Intelligent Reference SensorsThe JOFRA STS-200 intelligent reference sen-sors and the DLC sensor contain individual cali-bration data regarding the sensor. Firstly, this means that the time-consuming coefficientdownloading sequence with risk of errors is no longer necessary. Secondly, the user can change the reference sensor and be up and running immediately.With the intelligent sensors, AMETEK has eliminated a source of error, and the system is now giv-ing a fail-safe plug’n’play calibration system.Unique Reference SensorsThe STS-200 reference sensors and the DLC sensors have been specially designed. They are both angled 90˚ and have been customized to fit the calibrator so that they are only slightly higher than the top of the RTC calibrator.The unique design makes it possible to calibrate threaded sensors and sensors with connection heads without any problems.Easy to Carry Only 24.9 lbs/11.3 kgA calibrator is carried from one job to another. Therefore, it is essential that the weight of the calibrator is as low as possible.We have thoroughly included the weight issue in our design and have developed design tech-niques that have made the RTC calibrator lightweight and easy to carry around without compro-mising its quality, durability, and functionality. The purpose of minimizing the weight of the RTC calibrator is to protect, especially frequent users from overload.Long Inserts for Accurate CalibrationThe new extended insert length increases the maximum possible diameter of the sensor under test to 16 mm. Switch tests of long bulb sensors can be carried out with very high accuracy.SetTemperatureInternal ReferenceTemperature Di erenceSensor-Under-TestU p p e r Z o n eM a i n Z o n eWide Temperature Range 700°CThe RTC-700 can perform calibration over a very wide temperature range starting from 33°C and up to 700°C (91 to 1292°F). This makes it possible to perform calibration jobs over a range of 667° C (1232° F) with only one calibrator.Easy to Read Color Display and User-Friendly NavigationThe 5.7" full color VGA display is very easy to read. The main temperatures, like SET, READ, TRUE and SUT (Sensor under test), are always displayed at all stages of the programming or calibration procedure.The navigation is menu-driven and very logical to use, and the display shows any important information needed for the current function in use. The communication windows pop up andare followed by discrete sound messages. The display is very bright, and the main information can easily be read from a distance. The advanced simplicity RTC user interface is available in English, German, Chinese, and Japanese.The large display contains more detailed information at a glance, such as:Up to five temperature readings simultaneously. Stability status.Load compensation status. Real time clock.Serial number of reference sensor. Sensor-under-test status.Fast Temperature CalibrationTime is money! This is why all the RTC calibrators have an increased heating and cooling speed compared to all other calibrators. With its newly developed heating block, the RTC-700 is able to perform a unique combination of high speed and high accuracy, resulting in savings in both production downtime and general calibration costs.Multi-Hole Insert KitsTwo special multi-hole insert kits have been developed to comply with the calibration of almost any sensor diameter without having to buy numerous inserts.The first kit is a metric insert kit consisting of only four inserts covering all diameters from 3 to 13mm. The other is an imperial insert kit consisting of only three inserts covering six different sizes from 1/8" to ½".All inserts have holes for both STS reference sensors and DLC sensors.With this insert kit in the carrying case, the user is now able to calibrate all commonly known sensor sizes. These insert kits are part of the JOFRA lightweight strategy.Special Designed Carrying CaseAMETEK has designed an all-in-one-handle carrying case that makes it possible to store both the STS reference sensors and DLC sensors in the carrying case with optimum physical protection. There is room for inserts and insulation plugs to cover all dimensions and compartments for the integrated support rod set, wires, manuals, certificates, plugs, insert tools etc.All compartments are specially designed to hold one of the above mentioned items. This makes it very easy to keep track of any accessories.For optimum protection of the calibrator and the accessories, the compartments are designed to hold the accessories fixed during transportation.Integrated Support RodThe integrated support rod is part of the reduced weightphilosophy. It is lightweight and very easy to mount onthe RTC. Two fixing holes are integrated in the calibratorwhere the support rods can be mounted. And even thoughits weight has been reduced by 50%, the support rod willremain very firmly positioned.MVI–Secure Temperature StabilityMVI stands for ’’Mains power Variance Im-munity’’. Unstable mains power is a majorcontributor to on-site calibration inaccura-cies. Traditional temperature calibrators oftenbecome unstable in production environ-ments where large electrical motors, heatingelements, and other devices are periodicallycycled on or off. The cycling of supply powercan cause the temperature regulator to per-form inconsistently, leading to both inaccurate readings and unstable temperatures.The JOFRA RTC calibrators all employ the MVI functionality, thus avoiding such stability problems. The MVI functionality is obtained by running the calibrator on stabilized DC voltage.Highest Accuracy (models B & C only)The RTC series calibrators may be supplied with a built-in reference thermometer to be used with an external reference sensor. This feature allows the instrument to perform calibrations on-site, while maintaining high accuracy.A special 90° angled external reference sensor has been designed to accommodate the calibration of sensors with a transmitter head, top connector, or similar arrangement. The user can decide whether to read the built-in reference sensor or the more accurate angled reference sensor from the large, easy-to-read LCD display of the calibrator. The external sensor and the internal sensor readings are independent of one another.SET-Follows-TRUE (models B & C only)Available on B and C models only, the “SET-Follows-TRUE” makes the instrument tune in until the temperature reading of the external reference “TRUE” meets the desired “SET” temperature. This feature is important when it is critical that the temperature of the calibration zone matches the desired temperature when measured with accurate external reference sensors.Reading of Sensor-Under-Test (model B only)Model B of the RTC is equipped with a built-inaccurate measuring circuit for sensor-under-test(input), which enables measurement of virtu-ally any type of temperature sensors including:Resistance thermometers (RTD), thermocouples(TC), transmitters, milliamps (mA), voltage (V) andthermostats.The RTC calibrators can be user-programmed fromthe keyboard for fully automatic sensor calibra-tions. Once the unit is programmed, the instrument is self-operating and performs the configured calibration routine. All calibration data is stored and can be read on the display.Switch Test (model B only)Users may perform a thermoswitch test and find “Open”, “Closed” and the hysteresis (deadband) automatically. The instrument retains the last twenty test results.MVI NORMAL MAINSAuto-SteppingUp to 20 different temperature steps may be pro-grammed including the hold time for each step.Upon completion of an auto-step routine, the usercan easily read the results for the sensor-under-test on the RTC display. Results from twenty auto-step calibrations are stored.The “Set temperature” feature allows the user toset the exact desired temperature with a resolu-tion of 0.001°.Enhanced StabilityA stability indicator shows when the RTC calibrator has reached the desired temperature and is stable. The user may change the stability criteria for the external reference and the sensor-under-test quickly and simply. The stability criterion is the user’s security of a correct calibration. A count-down timer is displayed next to the temperature read-out.Instrument SetupsThe RTC series allows the user to store up to ten (10) complete instrument setups. You may store all sorts of information including temperature units, stability criteria, use of external reference sensors, resolutions, sensors-under-test (SUT), conversions to temperature, display contrasts, etc. The setup may be recalled at any time.Maximum and Minimum TemperatureFrom the setup menu, the user can select the maximum and minimum temperature limit for the calibrator. This function prevents damage to the sensor-under-test caused by excessive tempera-tures, and it helps reducing sensor drift from exposures of too high temperatures. This feature can be locked with an access code.Silent OperationThe RTC calibrator can be programmed to run in silent operation. This function is an advantage if calibrating in a laboratory or in an office. If used in silent operation, the calibrator is not using its full speed potential.As Found/As Left (model B only)When running a calibration initiated from a work order, the user can select the calibration as an As Found or an As Left calibration.Sync OutputA synchronization output signals when the instrument is stable and may be used with ancillary devices such as video recorders, digital cameras or as an input to a data logging device. The SYNC output may be useful for automating and documenting your calibrations when calibrating exter-nal reading devices.Calibration of Indication DevicesWhen calibrating an indicating device in the work order mode, users may key in the results during or after the test. Using the “Calibration info” function, the user may view the complete calibration task, including the “Scenario” before the calibration takes place.JofraCal Hardware RequirementsINTEL™ PENTIUM™ 1.4 GHz processor. 128 MB RAM (256 MB recommended).80 MB free disk space on hard disk (120 MB recommended) prior to installation. USB input device for installation of program. 1 free USB and 1 free RS-232 serial port.Microsoft Windows® XP or Microsoft Windows® Vista. MS San Serif and Arial system fonts.Calibration of Up To 24 Sensors with the Jofra ASM ScannerUsing the JOFRA RTC series together with the ASM, Advanced Signal Multi-scanner, offers a great time-saving automatic solution to calibrate multiple temperature sen-sors at the same time. The ASM series is an eight channel scanner controlled by the JOFRACAL software on a PC. Up to 3 ASM units can be stacked to calibrate up to 24 sen-sors at a time. It can handle signals from 2-, 3- and 4 wire RTD’s, thermocouples, transmitters, temperature switches, and voltage.JofraCal Calibration SoftwareJofraCal is a highly versatile calibration soft-ware that is supplied together with the RTC calibrators. The software ensures easy calibra-tion of all kinds of temperature sensors, such as RTD´s, thermocouples, transmitters, and thermoswithes. Furthermore, it can be used for pressure calibration i.e. pressure gauges and pressure switches. JofraCal integrates with Jofra calibration instruments. As for temperature calibrators, it is the whole rangeof temperature calibrators. Regarding pressure calibrators, it integrates with the Crystal XP2i and nVision. JofraCal also has full integration with the series of signal calibrators.JofraCal may also be used for manual calibrations, as it can be set up to accept manual entry of calibration data together with other liquid baths, ice points, or dry-block heat sources.The calibration data collected can be stored on a PC for later recall or analysis. The RTC calibra-tor stores the calibration procedure and may be taken out to the process site without bringing a personal computer.This allows the RTC calibrator to:Operate as a stand-alone instrument, using advanced calibration routines without the assis-tance of a personal computer on site. The work order functionalityPrevent unauthorized changes to a calibration routine. Personnel who are not authorized toalter a calibration routine cannot do soOnce all calibrations are completed, the data may be uploaded to JOFRACAL for the printing of certificates. The data collected may be stored on the personal computer for later recall or analysis.JOFRACAL offers extended output formats of the captured calibration data such as PDF file format and ASCII/ semicolon separated text format for further processing and calculation of data in spreadsheets and word processors.Multi-Hole Inserts—Metric (mm)All inserts are supplied with an insulation plug drilled with the necessary holes.InstrumentInsert Type Insert Code*RTC-700 (A/B/C)Multi-hole Type 1M01127200Multi-hole Type 2M02127201Multi-hole Type 3M03127202Multi-hole Type 4M04127203Multi-hole Type 7M07127244Multi-hole Type 8M08127245Multi-hole Type 9M09127246Set of 4 Metric Multi Inserts, 3 to 13 mm. (Includes 127203, 127244, 127245, and 127246)SM127252* Use the insert code, when ordering a JOFRA standard multi-hole insert together with the RTC calibrator.1/4"4 mm4 mm 7 mm13 mm1/4" 4 mm4 mm5 mm6 mm3 mm4 mm9 mmInsert Code SMFunctional ComparisonNo part of this document may be reproduced or modified in any form or by any means, electronic or mechanical, without express written permission from Crystal Engineering Corporation.©2021 AMETEK IncorporatedUSA , FloridaTel +1 (800) 527 9999*******************USA , California *Tel +1 (800) 444 1850******************IndiaTel +91 22 2836 4750****************SingaporeTel +65 6484 2388****************China , Shanghai Tel +86 21 5868 5111**********************.cn China , BeijingTel +86 10 8526 2111**********************.cn United KingdomTel +44 (0) 1243 833 302**********************FranceTel +33 (0) 30 68 89 40***********************************GermanyTel +49 (0) 2159 9136 510*********************Denmark *Tel +45 4816 8000*****************ISO 17025 accredited calibration lab.。
3544中文资料
Devices that use the headphone output from CD-ROMs, CDs, MDs, personal computers, notebook computers, camcorders, etc.
SOP-8 *Pb-free plating product number: 3544L
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
PARAMETER
SYMBOL
Applied voltage
Vmax
Power dissipation
PD
Operating temperature
Topr
Storage temperature
Tstg
*Reduced by 4.5mW for each increase in Ta of 1℃ over 25℃
2
2
1
Po2
2
2
2
2
VNO
1
1
1
1
CS
1 1
1 2
2 1
1 1
1
RR
1
1
1
1
SW8A SW8B
2
OFF
2
ON
2
ON
2
ON
2
ON
2
ON
2
ON
2
ON
2
ON
1
ON
MONITOR IQ
CONDITIONS
V1AC,V2AC
V1AC,V2AC V1AC,V2AC V1AC,V2AC V1AC,V2AC V1AC,V2AC V1AC,V2AC
VICTOR 7244指针式万用表使用说明书.pdf
VICTOR7244指针式万用表使用说明书一.简介VICTOR7244是一台高精度的指针万用表。
它外形采用了数字万用表结构，吸取了数字万用表的特点。
特别在安全性能上采取了多种措施，因此安全性能大大提高，它可以达到CATⅢ600V标准。
它有21个量程，能测量直流电压、直流电流、交流电压、电通断判别等功能。
1.警告安全须知为避免受到电击、人身伤害或损坏仪表的可能性。
使用仪表以前请阅读“安全须知”和“警告”等相关信息。
2.安全须知EN61010标准，CATⅢ600V超电压标准，请遵循本手册的说明使用本仪表，否则仪表所提供的保护可能会受到损坏。
注意：警告、安全说明。
在使用本仪表时必须详细阅读说明书。
存在电击危险、警告使用者必须注意正确使用，防止电击构成危险。
二.安全准则○使用前先检查仪表的外壳，如果断裂或缺少塑胶件，仪表就不能正常工作，请勿再使用本仪表。
○检查表笔的绝缘是否损坏或有暴露的金属导线，检查表笔是否导通，如表笔已损坏，请更换再使用仪表。
○检测仪表是否工作正常，先通过测量已知电压的方式确认仪表工作正常，如果仪表工作不正常，切勿使用，应把仪表送专业维修人员进行维修。
○切勿在输入端施加超过仪表上所标示的额定电压。
○当仪表在60V直流直压或30V交流有效值电压下工作时，应小心操作，此时会有电击的危险存在。
○测量时必须使用正确的输入端及量程档位。
○不要测量高于允许输入值的电压或电流。
在不能确定测量值范围时，须将功能量程开关置于最大量程位置。
○进行在线电阻或电路通断测量之前，必须先将被测电路中所有电源切断，并将所有电容放电。
○使用表笔时，请使用软布及中性清洁剂清洁仪表外壳，切勿使用研磨剂及溶剂，以防外壳被腐蚀、损坏仪表危及安全。
三．电气符号说明双重绝缘警告接地存在电击危险~AC(交流)DC （直流）二极管保险丝电池四．仪表外表结构（见下图）1、外壳2、指针3、机械调零器4、功能按钮5、输入插孔6、电阻调零器7、功能面板五．刻度盘（见下图）1．电阻刻度线 2.镜槽 3.直流V/A刻度线4.交流电压刻度线5.音频电平刻度线6.二极管正向电流和正向电压刻度线六．测量操作说明警告输入端可能有危险电压，在测量前操作者必须仔细阅读说明书。
Mitutoyo 085-162-70 高精度高度尺 QM-Height 系列 小型工具仪器和数据管
S m a l l T o o l I n s t r u m e n t s a n d D a t a M a n a g e m e n tIntuitive buttons and layoutInside/outside diameters, maximum/minimum heights and displacement can be measured using a standard probeID measurement OD measurementPower supply• Four alkaline AA/LR6 batteries (standard accessories)• Also operates on four NiMH AA rechargeable batteriesand improves data reliability and operational efficiency.• Pressing a button on the grip activates the internal air pump.The base rises on a cushion of air and is able to be moved smoothly over the surface plate.Note: Measurements should not be madewhile this function is in use as it will cause measurement error.QM-Height measures height, height difference (step), inside/outside widths, inside/outside diameters, circle pitch, free-form surface maximum/minimum heights and height difference by scanning measurement Two subdisplay modes display the value from the previous measurements or the value from the zero/origin point. Origin points can also be set from hole centers.*Scanning measurement stroke is approx. 1 mm above and below from the start point of measurement.measurementMin. valueMax. valueUpper row: Meas. value (Height or Dia.) Lower row: Height difference CHeight A Height BHeight A and height B from the surface plate will be displayed.6Centralized Data Management600 mm stroke typeWithout air-suspension: 518-242, 518-243With air-suspension: 518-246, 518-247Wi re le ssTransmitterU-WAVE-TIP67 type: 02AZD730G Buzzer type: 02AZD880GMisinput due to manual input can be eliminated and dramatically improve operational efficiency.PCNote: Use a commercially available USB micro-cable (for communication use only).• The USB communication driver can be downloaded from the Mitutoyo website. https://www.mitutoyo.co.jp/eng/USB outputReceiver02AZD810DU-WAVE-RUSB-ITN-DUSB Input Tool Direct06AFM380DMeasurement Data Network SystemMeasurLink ® is an IoT platform for quality management that realizes “Visualization of Quality” by enabling real-time data collection from the networked Digimatic gages and global control and analysis.MeasurLink ® is a registered trademark of Mitutoyo Corporation in Japan and Mitutoyo America Corporation in the United States.06AFZ050 USB cable (A-microB)Digimatic output7Order No. Item nameSmall printer equipped with Data Logger 264-505A DP-1VA LOGGER 936937Digimatic connecting cable (1 m) 965014Digimatic connecting cable (2 m) 06AFZ050USB cable (A-microB) Measurement Data Input Unit 06AFM380D USB Input Tool Direct USB-ITN-D Measurement data wireless communication system 02AZD730G U-WAVE-T (Transmission unit) (IP67 type)02AZD880G U-WAVE-T (Transmission unit) (Buzzer type)02AZD790D U-WAVE-T dedicated cable (Standard use)02AZE140D U-WAVE-T dedicated cable (For foot switch)02AZD810D U-WAVE-R receiver 02AZE990U-WAVE mounting plateMeasurement data collection software for Excel USB-IT PAK V2.1Measurement data network system MeasurLinkOptional parts that enable centralized data managementContact points for a wide range of measurements (Refer to page 8.)No.Order No. Item descriptionDepth probe (1)12AAC072Depth probeInterchangeable contact points for ø5 stepped probe (2)957261ø2 mm ball (coaxial type)(3)957262ø3 mm ball (coaxial type)(4)957263ø4 mm ball (coaxial type)(5)957264ø14 mm disk (6)957265ø20 mm disk (7)12AAA788ø4 mm ball (eccentric type)(8)12AAA789ø6 mm ball (eccentric type)Special holder (9)12AAA792Holder for dial indicator (10)12AAA793Holder (Long)AC Adapter06AFZ950JAAD620JA for Japan/U.S.06AFZ950DAD620D for the EU 06AFZ950EAD620E for the UK 06AFZ950KAD620K for Korea 06AEG180DC AD620DC for China Others 05HZA1439x9 mm adapter (clamp underneath is required)05GZA033Clamp (for 9x9 mm adapter)05HZA144 6.35x12.7 mm adapter (clamp underneath is required) 901385Clamp (for 6.35x12.7 mm adapter) 05HZA173Scriber*Note: A gage block may be required for the zero-setting depending on theprobe or contact point to be used.* Used for measurements, cannot be used for scribing.WiredcommunicationWiredcommunicationDigimatic output936937 Digimatic connecting cable (1 m) 965014 Digimatic connecting cable (2 m)Data logger function gives ability to store up to 1000 records of measurement data.Digimatic Mini-Processor 264-505ADP-1VA LOGGERDigimatic output350 mm stroke typeWithout air-suspension: 518-240, 518-241With air-suspension: 518-244, 518-2451)2)3)4)5)6)7)8) 9)10)（94.6）ø7147ø14ø1947901) 12AAC072Depth probe8) 12AAA789ø6 mm ball (eccentric type)3) 957262ø3 mm ball (coaxial type)4) 957263ø4 mm ball (coaxial type)5) 957264ø14 mm disk6) 957265ø20 mm disk9) 12AAA792Holder for dial indicatorHolder (Long) Contact points for a wide range ofmeasurements7) 12AAA788ø4 mm ball (eccentric type)2) 957261ø2 mm ball (coaxial type)518-247518-245Standard accessoriesOrder No.Item12AAA715Probe diameter calibration block 05HZA148ø5 mm stepped probe—Alkaline batteries x 4 (AA/LR6)64PKA130B 64PKA129BSensor Systems Test Equipmentand Seismometers Digital Scale and DRO SystemsSmall Tool Instrumentsand Date ManagementMin-house on a sub-contract basis.Mitutoyo America CorporationOne Number to Serve You Better1-888-MITUTOYO (1-888-648-8869)M3 Solution Centers:Aurora, Illinois (Headquarters)Boston, MassachusettsCharlotte, North CarolinaCincinnati, OhioDetroit, MichiganLos Angeles, CaliforniaBirmingham, AlabamaSeattle, WashingtonHouston, Texas3M 0719-00 • Printed in USA • Aug. 2019©219MitutoyoAmericaCorporationFind additional product literatureand our product catalogNote: All inform ation regarding our products, and in particular the illustrations, drawings, dim ensional and perform ancedata contained in this printed matter as well as other technical data are to be regarded as approximate average values. Wetherefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations,descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of ourGeneral Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. Specificationsare subject to change without notice.Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products mayrequire prior approval by an appropriate governing authority.Trademarks and RegistrationsDesignations used by companies to distinguish their products are often claimed as trademarks. In all instances where MitutoyoAm erica Corporation is aware of a claim, the product nam es appear in initial capital or all capital letters. The appropriatecompanies should be contacted for more complete trademark and registration information.。
Mitutoyo J-16 Formtracer SV-C3100 SV-C4100 SERIE
(SV-C3100S4, H4, W4)
accuracy (at 20°C) ±(32+10L)µin (±0.8+0.01L)µm
(SV-C4100S4, H4, W4)
±(40+20L)µin (±1+0.02L)µm
(SV-C3100S8, H8, W8)
±(32+20L)µin (±0.8+0.02L)µm
X1-axis
Measuring range: 4" (100mm) or 8" (200mm)
Resolution:
1.97µin (0.05µm)
Measurement method: Linear encoder
Drive speed:
3.1"/s (80mm/s)
Traversing direction: Backward
Automatic Measurement
• A wide range of optional peripherals are available to support quick and easy CNC operation.
Y-axis Table
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
UTC TL074LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.1QW-R105-005,ALOW NOISE QUAD J-FET OPERATIONAL AMPLIFIERDESCRIPTIONThe UTC TL074 is a high speed J-FET input quad operational amplifier. It incorporates well matched,high voltage J-FET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.FEATURES*Low power consumption*Wide common-mode (up to v cc + ) and differential voltage range*Low input bias and offset current *Low noise e n = 15nV / √ Hz(typ)*Output short-circuit protection*High input impedance J-FET input stage *Low harmonic distortion:0.01%(typ)*Internal frequency compensation *Latch up free operation *High slewrate:13V/µs(typ)PIN CONFIGURATIONSUTC TL074LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.2QW-R105-005,ASCHEMATIC DIAGRAMABSOLUTE MAXIMUM RATINGS (Ta=25°C )PARAMETERSYMBOLVALUEUNIT Supply Voltage (note 1)Vcc +-18V Input Voltage (note 2)Vi +-15V Differential Input Voltage (note 3)Vid +-30V Power DissipationPtot 680mW Output Short-Circuit Duration (Note 4)Infinite Operating Free Air Temperature Toper 0 to 70°C Storage TemperatureTstg5 to 150°CNOTES: 1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) ofthe supply voltages where the zero reference level is the midpoint between Vcc- and Vcc+.2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts,whichever is less.3. Differential voltages are at the non-inverting input terminal with respect to the inverting input terminal.4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded.UTC TL074LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.3QW-R105-005,AUTC TL074C ELECTRICAL CHARACTERISTICS ( Vcc=+-15V, Ta=25°C , unless otherwisespecified)PARAMETER SYMBOLMIN TYP MAX UNIT Input Offset Voltage(Rs=50Ω), Ta=25°C Tmin<=Ta<=TmaxVio31013mVTemperature Coefficient of Input Offset VoltageDvio 10¦ÌV /¡æInput Offset Current*Ta=25°CTmin<=Ta<=TmaxIio510010pA nA Input Bias Current*Ta=25°CTmin<=Ta<=TmaxIib3020020pA nA Input Common Mode Voltage Vicm +-11-12~+15VOutput Voltage Swing(R L =10k Ω)Ta=25°C, R L =2k Ω,Ta=25°C, R L =10k ΩTmin<=Ta<=Tmax, R L =2k ΩTmin<=Ta<=Tmax, R L =10k ΩVopp 101210121213.5V Large Signal Voltage Gain(R L =2k Ω, Vo=+-10V) Ta=25°CTmin<=Ta<=TmaxAvd 2515200V/mV Gain Bandwidth Product(Ta=25°C, R L =10k Ω,f=100kHz, Vin=10mV, C L =100pF)GBP 23MHz Input Resistance Ri 1012ΩCommon Mode Rejection Ratio(R S =50Ω)Ta=25°CTmin<=Ta<=TmaxCMR 707086dB Supply Voltage Rejection Ratio(R S =50Ω)Ta=25°CTmin<=Ta<=TmaxSVR 707086dB Supply Current( no load)Ta=25°CTmin<=Ta<=TmaxIcc 1. 4 2. 52.5mAChannel Separation(Av=100, Ta=25°C)V 01/V 02120dB Output Short-circuit Current Ta=25°CTmin<=Ta<=TmaxIos 1010406060mASlew Rate(Vi=10V, R L =2k Ω, C L =100pF,Ta=25°C, unity gain)SR 813V/µsRise Time(Vi=20mV, R L =2k Ω, C L =100pF,Ta=25°C, unity gain)t r 0.1µsOvershoot Factor(Vi=20mV, R L =2k Ω,C L =100pF, Ta=25°C, unity gain)Kov 10%Total Harmonic Distortion(Av=20dB, f=1kHz R L =2k Ω, C L =100pF, Ta=25Ω, Vo=2Vpp)THD 0.01%Phase Margin 45DegreesEquivalent Input Noise Voltage(R S =100Ω,f=1KHz)e n 15*The Input bias currents are junction leakage currents, which approximately double for every 10°C increase in the junction temperature.UTC TL074LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.4QW-R105-005,AUTC TL074AC ELECTRICAL CHARACTERISTICS ( Vcc=+-15V, Ta=25°C , unless otherwisespecified)PARAMETER SYMBOLMIN TYP MAX UNIT Input Offset Voltage(Rs=50Ω), Ta=25°C Tmin<=Ta<=TmaxVio367mVTemperature Coefficient of Input Offset Voltage(Rs=50Ω)Dvio 10µV/°C Input Offset Current*Ta=25°CTmin<=Ta<=TmaxIio51004pA nA Input Bias Current*Ta=25°CTmin<=Ta<=TmaxIib2020020pA nA Input Common Mode Voltage Vicm +-11-12~+15VOutput Voltage Swing(R L =10k Ω)Ta=25°C, R L =2k Ω,Ta=25°C, R L =10k ΩTmin<=Ta<=Tmax, R L =2k ΩTmin<=Ta<=Tmax, R L =10k ΩVopp 101210121213.5V Large Signal Voltage Gain(R L =10k Ω, Vo=+-10V) Ta=25°CTmin<=Ta<=TmaxAvd 5025200V/mV Gain Bandwidth Product(Ta=25°C, R L =10k Ω,C L =100pF)GBP 23MHz Input Resistance Ri 1012ΩCommon Mode Rejection Ratio(R S =50Ω)Ta=25°CTmin<=Ta<=TmaxCMR 808086dB Supply Voltage Rejection Ratio(R S =50Ω)Ta=25°CTmin<=Ta<=TmaxSVR 808086dB Supply Current( no load)Ta=25°CTmin<=Ta<=TmaxIcc 1. 4 2. 52.5mAChannel Separation(Av=100, Ta=25°C)V 01/V 02120dB Output Short-circuit Current Ta=25°CTmin<=Ta<=TmaxIos 1010406060mASlew Rate(Vi=10V, R L =2k Ω, C L =100pF,Ta=25°C, unity gain)SR 813V/µsRise Time(Vi=20mV, R L =2k Ω, C L =100pF,Ta=25°C, unity gain)t r 0.1µsOvershoot Factor(Vi=20mV, R L =2k Ω,C L =100pF, Ta=25°C, unity gain)Kov 10%Total Harmonic Distortion(Av=20dB, f=1kHz R L =2k Ω, C L =100pF, Ta=25°C, Vo=2Vpp)THD 0.01%Phase Margin 45DegreesEquivalent Input Noise Voltage(R S =100Ω,f=1KHz)e n 15*The Input bias currents are junction leakage currents, which approximately double for every 10°C increase in the junction temperature.UTC TL074LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.5QW-R105-005,AUTC TL074BC ELECTRICAL CHARACTERISTICS ( Vcc=+-15V, Ta=25°C , unless otherwisespecified)PARAMETER SYMBOLMIN TYP MAX UNIT Input Offset Voltage(Rs=50Ω), Ta=25°C Tmin<=Ta<=TmaxVio135mVTemperature Coefficient of Input Offset Voltage(Rs=50Ω)Dvio 10¦ÌV /¡æInput Offset Current*Ta=25°CTmin<=Ta<=TmaxIio51004pA nA Input Bias Current*Ta=25°CTmin<=Ta<=TmaxIib2020020pA nA Input Common Mode Voltage Vicm +-11-12~+15VOutput Voltage Swing(R L =10k Ω)Ta=25°C, R L =2k Ω,Ta=25°C, R L =10k ΩTmin<=Ta<=Tmax, R L =2k ΩTmin<=Ta<=Tmax, R L =10k ΩVopp 101210121213.5V Large Signal Voltage Gain(R L =10k Ω, Vo=+-10V) Ta=25°CTmin<=Ta<=TmaxAvd 5025200V/mV Gain Bandwidth Product(Ta=25°C, R L =10k Ω,C L =100pF)GBP 23MHz Input Resistance Ri 1012ΩCommon Mode Rejection Ratio(R S =50Ω)Ta=25°CTmin<=Ta<=TmaxCMR 808086dB Supply Voltage Rejection Ratio(R S =50Ω)Ta=25°CTmin<=Ta<=TmaxSVR 808086dB Supply Current( no load)Ta=25°CTmin<=Ta<=TmaxIcc 1. 4 2. 52.5mAChannel Separation(Av=100, Ta=25°C)V 01/V 02120dB Output Short-circuit Current Ta=25°CTmin<=Ta<=TmaxIos 1010406060mASlew Rate(Vi=10V, R L =2k Ω, C L =100pF,Ta=25°C, unity gain)SR 813V/µsRise Time(Vi=20mV, R L =2k Ω, C L =100pF,Ta=25°C, unity gain)t r 0.1µsOvershoot Factor(Vi=20mV, R L =2k Ω,C L =100pF, Ta=25°C, unity gain)Kov 10%Total Harmonic Distortion(Av=20dB, f=1kHz R L =2k Ω, C L =100pF, Ta=25°C, Vo=2Vpp)THD 0.01%Phase Margin 45DegreesEquivalent Input Noise Voltage(R S =100Ω,f=1KHz)e n 15*The Input bias currents are junction leakage currents, which approximately double for every 10°C increase in the junction temperature.UTC TL074LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.6QW-R105-005,AUTC TL074LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.7QW-R105-005,AUTC TL074LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.8QW-R105-005,AUTC TL074LINEAR INTEGRATED CIRCUITUTC UNISONIC TECHNOLOGIES CO., LTD.9QW-R105-005,APARAMETER MEASUREMENT INFORMATIONTYPICAL APPLICATIONS。