5KP24A
5KP28A,TVS瞬变抑制二极管中文资料
VOLTAGE RANGE: 5.0 - 19 0 V5KP5.0A(CA) - 5KP190A(CA)POWER: 5000Wa tAXIAL LEADED TRANSIENT VOLTAGE SUPPRESSORS DIODECase: JEDEC R-6 Molded Plastic Uni- and Bi-Directional Versions Available Excellent ClampingCapability Fast Response Time Plastic Case Material has UL FlammabilityClassification Rating 94V-OMechanical DataTerminals: Axial Leads, Solderable per MIL-STD-750, Method 2026Polarity: Cathode Band or Cathode Notch FeaturesMaximum Ratings and Electrical Characteristics@T A =25°C unless otherwise specifiedCharacteristicSymbol Value Unit Peak Pulse Power Dissipation at T A = 25°C (Note 1, 2, 5) Figure 3P PPM 5000 MinimumW Peak Forward Surge Current (Note 3)I FSM 400A Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 1I PPM See Table 1A Steady State Power Dissipation (Note 2, 4)P M(AV)8.0W Operating and Storage Temperature RangeT j , T STG-55 to +175°CNote: 1. Non-repetitive current pulse, per Figure 1 and derated above T A = 25°C per Figure 4.2. Mounted on 20mm 2 copper pad.3. 8.3ms single half sine-wave duty cycle = 4 pulses per minutes maximum,4. Lead temperature at 75°C = T L .5. Peak pulse power waveform is 10/1000µS.!!!!!!Weight: 2.10 grams (approx.)!5KP28A14.413.612.912.094.086.083.071.112.2 10.0 9.448.898.337.226.676.40(uA)R RMW RMW@V leakage Reverse CurrentPulse Peak (A)Vc(V)(mA)BR MAX CurrentMax.BR MIN @IMin.Volgtage Breakdown (V)(BI)(Uni)Voltage Stand-Off Reverse Maximum Clamping V TPP(V)V @I Volgtage Breakdown Test (V)V T Volgtage @I PP 5KP5.0A 5KP5.0CA 5.0 7.25 10 9.2 543.5 1000.0 5KP6.0A 5KP6.0CA 6.0 7.67 10 10.3 485.4 1000.05KP6.5A 5KP6.5CA 6.58.30 10 11.2 446.4 500.05KP7.0A 5KP7.0CA 7.0 7.78 8.95 10 416.7 200.0 5KP7.5A 5KP7.5CA 7.5 9.58 1.0 387.6 50.0 5KP8.0A 5KP8.0CA 8.0 10.23 1.0 367.6 10.0 5KP8.5A 5KP8.5CA 8.5 10.82 1.0 347.2 5.05KP9.0A 5KP9.0CA 9.0 11.5 1.0 15.4 324.7 5.05KP10A 5KP10CA 10 11.112.8 1.0 17.0 294.1 5.0 5KP11A 5KP11CA 11 14.0 1.0 18.2 274.7 5.0 5KP12A 5KP12CA 12 13.3 15.3 1.0 19.9 251.3 5.0 5KP13A 5KP13CA 13 14.4 16.5 1.0 21.5 232.6 5.0 5KP14A 5KP14CA 14 15.6 17.9 1.0 23.2 215.5 5.0 5KP15A 5KP15CA 15 16.7 19.2 1.0 24.4204.95.0 5KP16A 5KP16CA 16 17.8 20.5 1.0 26.0 192.3 5.0 5KP17A 5KP17CA 17 18.9 21.7 1.0 27.6 181.2 5.0 5KP18A 5KP18CA 18 20.0 23.3 1.0 29.2 171.2 5.0 5KP20A 5KP20CA 20 22.2 25.5 1.0 32.4 154.3 5.0 5KP22A 5KP22CA 22 24.4 28.0 1.0 35.5 140.8 5.0 5KP24A 5KP24CA 24 26.7 30.7 1.0 38.9 128.5 5.0 5KP26A 5KP26CA 26 28.9 33.2 1.0 42.1 118.8 5.0 5KP28A 5KP28CA 28 31.1 35.8 1.0 45.4 110.1 5.0 5KP30A 5KP30CA 30 33.3 38.3 1.0 48.4 103.3 5.0 5KP33A 5KP33CA33 36.7 42.2 1.0 53.3 93.8 5.0 5KP36A5KP36CA 36 40.0 46.0 1.0 58.1 86.1 5.0 5KP40A 5KP40CA 40 44.4 51.1 1.0 64.5 77.5 5.0 5KP43A 5KP43CA 4347.8 54.9 1.0 69.4 72.0 5.0 5KP45A 5KP45CA 45 50.0 57.5 1.0 72.7 68.85.0 5KP48A 5KP48CA 48 53.3 61.3 1.0 77.4 64.6 5.0 5KP51A 5KP51CA 51 56.7 65.2 1.0 82.4 60.7 5.0 5KP54A 5KP54CA 54 60.0 69.0 1.0 87.1 57.4 5.0 5KP58A 5KP58CA 58 64.4 74.1 1.0 93.6 53.4 5.05KP60A 5KP60CA 60 66.7 76.7 1.0 96.8 51.7 5.05KP64A 5KP64CA 64 81.8 1.0 103 48.5 5.0 5KP70A 5KP70CA 70 77.8 89.5 1.0 113 44.2 5.0 5KP75A 5KP75CA 75 95.8 1.0 121 41.3 5.0 5KP78A 5KP78CA 78 99.7 1.0 12639.75.05KP85A 5KP85CA 85 108.2 1.0 137 36.5 5.0 5KP90A 5KP90CA 90100 115.5 1.0 146 34.2 5.05KP100A 5KP100CA 100 111 128.0 1.0 162 30.9 5.0 5KP110A 5KP110CA 110 122 140.51.0 177 28.2 5.0 5KP120A 5KP120CA120133 153.0 1.0 193 25.9 5.0 5KP130A 5KP130CA 130144 165.5 1.0 209 23.9 5.0 5KP150A 5KP150CA 150 167 192.5 1.0 243 20.6 5.0 5KP160A 5KP160CA 160 178 205.0 1.0 259 19.3 5.0 5KP170A 5KP170CA 170 189 217.5 1.0 275 18.2 5.0 5KP180A 5KP180CA 180 200 230.4 1.0 290 17.2 5.0 5KP190A 5KP190CA 190211243.21.030616.35.0TYPE5KP28A110100200100100010,000100,000V ,REVERSE STANDOFF VOLTAGE (V)Fig.2Typical Junction CapacitanceRWM C ,C A P A C I T A N C E (p F )j0.11.010100100010,0001.0101001000T PULSE WIDTH (s)Fig.3Pulse Derating CurveP ,µP ,P E A K P U L S E P O W E R (k W )P25507510012515017520002.04.06.08.0T ,LEAD TEMPERATURE (C)Fig.5Steady State Power DeratingL °P ,S T E A D Y S T A T E P O W E R D I S S I P A T I O N (W )D 02550751001251501752001007550250T ,AMBIENT TEMPERATURE (C)Fig.4Pulse Derating CurveA °P E A K P U L S E D E R A T I N G I N %O F P E A K P O W E R O R C U R R E N T123I ,PE A K P U L S E C U R R E N T (%I )P p p t,TIME (ms)Fig.1Pulse Waveform5KP28A。
5KP36CA,TVS瞬变抑制二极管中文资料
VOLTAGE RANGE: 5.0 - 19 0 V5KP5.0A(CA) - 5KP190A(CA)POWER: 5000Wa tAXIAL LEADED TRANSIENT VOLTAGE SUPPRESSORS DIODECase: JEDEC R-6 Molded Plastic Uni- and Bi-Directional Versions Available Excellent ClampingCapability Fast Response Time Plastic Case Material has UL FlammabilityClassification Rating 94V-OMechanical DataTerminals: Axial Leads, Solderable per MIL-STD-750, Method 2026Polarity: Cathode Band or Cathode Notch FeaturesMaximum Ratings and Electrical Characteristics@T A =25°C unless otherwise specifiedCharacteristicSymbol Value Unit Peak Pulse Power Dissipation at T A = 25°C (Note 1, 2, 5) Figure 3P PPM 5000 MinimumW Peak Forward Surge Current (Note 3)I FSM 400A Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 1I PPM See Table 1A Steady State Power Dissipation (Note 2, 4)P M(AV)8.0W Operating and Storage Temperature RangeT j , T STG-55 to +175°CNote: 1. Non-repetitive current pulse, per Figure 1 and derated above T A = 25°C per Figure 4.2. Mounted on 20mm 2 copper pad.3. 8.3ms single half sine-wave duty cycle = 4 pulses per minutes maximum,4. Lead temperature at 75°C = T L .5. Peak pulse power waveform is 10/1000µS.!!!!!!Weight: 2.10 grams (approx.)!5KP36CA14.413.612.912.094.086.083.071.112.2 10.0 9.448.898.337.226.676.40(uA)R RMW RMW@V leakage Reverse CurrentPulse Peak (A)Vc(V)(mA)BR MAX CurrentMax.BR MIN @IMin.Volgtage Breakdown (V)(BI)(Uni)Voltage Stand-Off Reverse Maximum Clamping V TPP(V)V @I Volgtage Breakdown Test (V)V T Volgtage @I PP 5KP5.0A 5KP5.0CA 5.0 7.25 10 9.2 543.5 1000.0 5KP6.0A 5KP6.0CA 6.0 7.67 10 10.3 485.4 1000.05KP6.5A 5KP6.5CA 6.58.30 10 11.2 446.4 500.05KP7.0A 5KP7.0CA 7.0 7.78 8.95 10 416.7 200.0 5KP7.5A 5KP7.5CA 7.5 9.58 1.0 387.6 50.0 5KP8.0A 5KP8.0CA 8.0 10.23 1.0 367.6 10.0 5KP8.5A 5KP8.5CA 8.5 10.82 1.0 347.2 5.05KP9.0A 5KP9.0CA 9.0 11.5 1.0 15.4 324.7 5.05KP10A 5KP10CA 10 11.112.8 1.0 17.0 294.1 5.0 5KP11A 5KP11CA 11 14.0 1.0 18.2 274.7 5.0 5KP12A 5KP12CA 12 13.3 15.3 1.0 19.9 251.3 5.0 5KP13A 5KP13CA 13 14.4 16.5 1.0 21.5 232.6 5.0 5KP14A 5KP14CA 14 15.6 17.9 1.0 23.2 215.5 5.0 5KP15A 5KP15CA 15 16.7 19.2 1.0 24.4204.95.0 5KP16A 5KP16CA 16 17.8 20.5 1.0 26.0 192.3 5.0 5KP17A 5KP17CA 17 18.9 21.7 1.0 27.6 181.2 5.0 5KP18A 5KP18CA 18 20.0 23.3 1.0 29.2 171.2 5.0 5KP20A 5KP20CA 20 22.2 25.5 1.0 32.4 154.3 5.0 5KP22A 5KP22CA 22 24.4 28.0 1.0 35.5 140.8 5.0 5KP24A 5KP24CA 24 26.7 30.7 1.0 38.9 128.5 5.0 5KP26A 5KP26CA 26 28.9 33.2 1.0 42.1 118.8 5.0 5KP28A 5KP28CA 28 31.1 35.8 1.0 45.4 110.1 5.0 5KP30A 5KP30CA 30 33.3 38.3 1.0 48.4 103.3 5.0 5KP33A 5KP33CA33 36.7 42.2 1.0 53.3 93.8 5.0 5KP36A5KP36CA 36 40.0 46.0 1.0 58.1 86.1 5.0 5KP40A 5KP40CA 40 44.4 51.1 1.0 64.5 77.5 5.0 5KP43A 5KP43CA 4347.8 54.9 1.0 69.4 72.0 5.0 5KP45A 5KP45CA 45 50.0 57.5 1.0 72.7 68.85.0 5KP48A 5KP48CA 48 53.3 61.3 1.0 77.4 64.6 5.0 5KP51A 5KP51CA 51 56.7 65.2 1.0 82.4 60.7 5.0 5KP54A 5KP54CA 54 60.0 69.0 1.0 87.1 57.4 5.0 5KP58A 5KP58CA 58 64.4 74.1 1.0 93.6 53.4 5.05KP60A 5KP60CA 60 66.7 76.7 1.0 96.8 51.7 5.05KP64A 5KP64CA 64 81.8 1.0 103 48.5 5.0 5KP70A 5KP70CA 70 77.8 89.5 1.0 113 44.2 5.0 5KP75A 5KP75CA 75 95.8 1.0 121 41.3 5.0 5KP78A 5KP78CA 78 99.7 1.0 12639.75.05KP85A 5KP85CA 85 108.2 1.0 137 36.5 5.0 5KP90A 5KP90CA 90100 115.5 1.0 146 34.2 5.05KP100A 5KP100CA 100 111 128.0 1.0 162 30.9 5.0 5KP110A 5KP110CA 110 122 140.51.0 177 28.2 5.0 5KP120A 5KP120CA120133 153.0 1.0 193 25.9 5.0 5KP130A 5KP130CA 130144 165.5 1.0 209 23.9 5.0 5KP150A 5KP150CA 150 167 192.5 1.0 243 20.6 5.0 5KP160A 5KP160CA 160 178 205.0 1.0 259 19.3 5.0 5KP170A 5KP170CA 170 189 217.5 1.0 275 18.2 5.0 5KP180A 5KP180CA 180 200 230.4 1.0 290 17.2 5.0 5KP190A 5KP190CA 190211243.21.030616.35.0TYPE5KP36CA110100200100100010,000100,000V ,REVERSE STANDOFF VOLTAGE (V)Fig.2Typical Junction CapacitanceRWM C ,C A P A C I T A N C E (p F )j0.11.010100100010,0001.0101001000T PULSE WIDTH (s)Fig.3Pulse Derating CurveP ,µP ,P E A K P U L S E P O W E R (k W )P25507510012515017520002.04.06.08.0T ,LEAD TEMPERATURE (C)Fig.5Steady State Power DeratingL °P ,S T E A D Y S T A T E P O W E R D I S S I P A T I O N (W )D 02550751001251501752001007550250T ,AMBIENT TEMPERATURE (C)Fig.4Pulse Derating CurveA °P E A K P U L S E D E R A T I N G I N %O F P E A K P O W E R O R C U R R E N T123I ,PE A K P U L S E C U R R E N T (%I )P p p t,TIME (ms)Fig.1Pulse Waveform5KP36CA。
TVS二极管5KP 规格书
PPPM IPPM PM(AV)
IFSM TJ , TSTG
Minimum 5000 See Table 8
400 -55 to +175
Watts Amps Watts
Amps ć
Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25ć per Fig. 2. 2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
(9.5mm) lead length, 5lbs., (2.3kg) tension.
P600
MECHANICAL DATE
Case: Molded plastic over glass passivated junction. Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes positive end (cathode) except Bipolar. Mounting Position: Any. Weight: 0.07 ounce, 2.1grams.
VBR MAX.(V) 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 222.00 233.00 247.00 263.00 272.00 306.00
5kp30a二极管参数
5kp30a二极管参数摘要：一、引言二、5kp30a 二极管的参数介绍1.结构与分类2.主要参数3.特性与性能三、5kp30a 二极管的应用领域1.电源电路2.信号放大与处理3.光电子器件四、5kp30a 二极管的市场前景与挑战1.市场规模与增长2.技术发展趋势3.国内外竞争格局五、结论正文：一、引言5kp30a 二极管作为一种常见的电子元件，广泛应用于各种电子设备中。
本文将介绍5kp30a 二极管的参数、特性、应用领域及市场前景与挑战，以帮助读者更好地了解这一产品。
二、5kp30a 二极管的参数介绍1.结构与分类5kp30a 二极管采用P 型半导体和N 型半导体制作，具有单向导通特性。
根据封装形式和用途，5kp30a 二极管可分为多种类型。
2.主要参数5kp30a 二极管的主要参数包括正向电压、正向电流、反向电压、反向电流等。
这些参数反映了二极管的导通特性和承受能力。
3.特性与性能5kp30a 二极管具有较高的正向电压和电流，以及较低的反向电压和电流。
在一定范围内，其特性与性能表现稳定。
三、5kp30a 二极管的应用领域1.电源电路5kp30a 二极管在电源电路中主要起到整流、稳压等作用，保证电源输出的稳定性。
2.信号放大与处理5kp30a 二极管可用于放大、开关等电路，实现信号的传输与处理。
3.光电子器件5kp30a 二极管在光电子器件中，如光电传感器、光电二极管等，具有重要作用。
四、5kp30a 二极管的市场前景与挑战1.市场规模与增长随着电子产业的迅速发展，5kp30a 二极管的市场需求持续增长。
未来，随着新兴领域的拓展，市场规模有望进一步扩大。
2.技术发展趋势随着科技的进步，5kp30a 二极管在材料、工艺等方面不断优化，以满足更高性能的需求。
3.国内外竞争格局5kp30a 二极管市场竞争激烈，国内外企业竞相研发新型产品，以提升竞争力。
五、结论5kp30a 二极管作为一种重要的电子元件，具有广泛的应用领域和市场前景。
15000Watts TVS 17到280伏特电阻说明书
NOTE
Rev.3-3-12012020
4
0&&6(0,&20
15KP17(C)A THRU 15KP280(C)A
Electrical Characteristics @ 25°C Unless Otherwise Specified
MCC PART NUMBER
UNI-POLAR 15KP17A 15KP18A 15KP20A 15KP22A 15KP24A 15KP26A 15KP28A 15KP30A 15KP33A 15KP36A 15KP40A 15KP43A 15KP45A 15KP48A 15KP51A 15KP54A 15KP58A 15KP60A 15KP64A 15KP70A 15KP75A 15KP78A 15KP85A 15KP90A 15KP100A 15KP110A 15KP120A 15KP130A 15KP150A 15KP160A 15KP170A 15KP180A 15KP200A 15KP220A 15KP240A 15KP260A 15KP280A
• Polarity :Color Band Denotes Cathodes Except Bipolar • Weight: 0.07 ounce, 2.5 grams • Terminals: Plated Axial leads, Solderable Per MIL-STD-750,
Methode 2026
5
33.3
36.69
5
36.7
40.4
5
40.0
44
5
44.4
48.9
5
47.8
52.6
5
50.0
55
硬件模块单元测试报告-模板
硬件模块单元测试报告编制: 日期:审核: 日期: 批准: 日期:目录目录 (1)第一章概述 (3)1.1目的和范围 (3)1.2测试概述 (3)第二章测试资源及环境 (4)2.1 硬件配置 (4)2.2 测试设备清单 (4)2.3 测试环境 (4)2.4 测试方式 (4)第三章测试数据 (6)3.1 主控板测试 (6)3.1.1短路测试 (6)3.1.2直流电压、纹波测试 (6)3.1.3接口通讯信号测试 (8)3.1.3.1主控板与按键板打印部分 (8)3.1.3.2主控板与核心板 (8)3.1.3.3主控板与液晶屏 (8)3.1.3.4主控板与触摸屏 (9)3.1.3.5主控板与感光板 (10)3.1.3.6主控板对按键板指示灯部分检测信号 (10)3.1.3.8主控板与WIFI板 (10)3.1.4充电测试 (11)3.1.5电源转换效率测试 (11)3.1.5.1 5V电源转换效率测试 (11)2.1.5.2 +8V电源转换效率测试 (13)3.1.6 DC_DC带负载测试 (14)3.2 按键板测试 (15)3.2.1短路测试 (15)3.2.2直流电压、纹波测试 (15)3.2.3接口通讯信号测试 (15)3.2.3.1 按键板与打印机 (15)第一章概述1.1目的和范围本文描述H3硬件模块的测试方法和步骤, 本方案的来源是《H3硬件总体需求》和《H3硬件总体方案》适用范围是:1.2测试概述在硬件模块测试阶段, 测试人员根据细化后的方案进行集成测试, 测试的重点是接口, 主要包括以下几个方面:1.各个板卡接口和测试点电压纹波测试2.控制/检测信号逻辑状态分析第二章测试资源及环境2.1 硬件配置2.3 测试环境环境温度: 0-55℃；大气压力: 700hPa～1060hPa；相对湿度：15% ~ 95%, 非凝2.4 测试方式内部测试第三章测试数据3.1 主控板测试3.1.1短路测试3.1.3接口通讯信号测试3.1.3.1主控板与按键板打印部分3.1.3.2主控板与核心板3.1.3.3主控板与液晶屏3.1.3.4主控板与触摸屏3.1.3.5主控板与感光板3.1.3.8主控板与WIFI板3.1.4充电测试使用电源交流100～240Vac 50Hz/60Hz 使用内置锂电池 12.6V/2600mA3.1.6 DC_DC带负载测试3.2 按键板测试3.2.1短路测试3.2.3接口通讯信号测试3.2.3.1 按键板与打印机。
瞬态电压抑制_TVS_二极管及其应用
1、TV S 二极管简介本文以P RO T E K 公司提供的5KW 系列硅瞬态电压抑制(TV S )二极管为例,介绍这类器件的主要特性。
利用这种器件可以避免过高的瞬态电压对电压敏感元件造成损坏。
TV S 二极管是一种硅PN 结器件,它能够吸收很高的瞬态电压。
该系列器件适用电压范围为5～110V ,公差为5～10%。
TV S 二极管能够承受很高的浪涌电压,响应时间非常短,内阻非常小。
由于瞬态电压是不可预测的,并且阻抗随瞬态电压而变化,没有确定的数值。
同时在器件承变很大的脉冲电流时,温度变化可造成最高钳位电压(V C )50～70%的测量误差。
因此规定最高阻抗无实际意义。
但是低电流状态下的最低电压(V B R )和在最高脉冲峰值电流状态下的最高钳位电压是可以确定的。
5KW TV S 系列二极管的峰值脉冲额定功率为5000W/ms ,因此可用于长距离的传输电路中,以避免雷电对电路系统造成危害。
TV S 二极管钳位作用的响应时间为1×10-12s 。
因此,它可用来保护集成电路、M O S 器件、混合电路以及其它对电压敏感的半导体元器件。
TV S 二极管可以串联或并联,以提高峰值功率。
主要特性:●5000W 峰值功耗;●电压范围5～110V ;●主要用于直流电源。
极限参数:●峰值脉冲功耗(25℃)5000W ;●工作和贮存温度为-55～175℃;●正向浪涌电流额定值为100A (1/120秒,25℃);●稳态功耗为5W (T L =75℃);●占空比为0.05%;●钳位响应时间,小于1×10-12秒。
主要性能:5k W TV S 系列二极管的电气参数如表1所列。
峰值脉冲功率与脉冲宽度的关系如图1所示。
2、TV S 二极管的应用由于TV S 二极管能够吸收很高的瞬态●新特器件应用图1峰值脉冲功率与脉冲宽度的关系瞬态电压抑制(TV S )二极管及其应用段景汉表1 5k W系列TV S二极管电气特性 (25℃)型 号额定电压(V)击穿电压V BR(V) I T(mA)最大工作电流I D(μA)钳位电压V C(V)最大脉冲电流I PP(A)最高温度系数%燉℃5KP5.0 5KP5.0A 5KP6.0 5KP6.0A 5.05.06.06.06.406.406.676.675050505020002000500050009.69.211.410.35205434394854.04.04.04.05KP6.5 5KP6.5A 5KP8.0 5KP8.0A 6.56.57.07.07.227.227.787.7850505050200020001000100012.311.213.312.04074473784174.04.05.05.05KP7.5 5KP7.5A 5KP8.0 5KP8.0A 7.57.58.08.08.338.338.898.89555525025015015014.312.915.013.63503883333676.06.06.06.05KP8.5 5KP8.5A 5KP9.0 5KP9.0A 8.58.59.09.09.449.4410.010.055555050202015.914.416.915.43143472953257.07.08.08.05KP10 5KP10A 5KP11 5KP11A 1010111111.111.112.212.255551515101018.817.020.118.22662942492749.09.010105KP12 5KP12A 5KP13 5KP13A 1212131313.313.314.414.455551010101022.019.923.821.5227251210232111112125KP14 5KP14A 5KP15 5KP15A 1414151515.615.616.716.755551010101025.823.226.924.4194215188206131315155KP16 5KP16A 5KP17 5KP17A 1616171717.817.818.918.955551010101028.826.030.527.6176192164181181619185KP18 5KP18A 5KP20 5KP20A 1818202020.020.022.222.255551010101032.229.235.832.4155172139154201924225KP22 5KP22A 5KP24 5KP24A 2222242424.424.426.726.755551010101039.435.543.038.9127141116128272430275KP26 5KP26A 5KP28 5KP28A 2626282828.928.931.131.155551010101046.642.150.145.510711999110332934305KP30 5KP30A 5KP33 5KP33A 3030333333.333.336.736.755551010101053.548.459.053.3931038594383541385KP36 5KP36A 5KP40 5KP40A 3636404040.040.044.444.455551010101064.358.171.464.578867078454050455KP43 5KP43A 5KP45 5KP45A 4343454547.847.850.050.055551010101076.769.480.372.765726269544957515KP48 5KP48A 5KP51 5KP51A 4848515153.353.356.756.755551010101085.577.491.182.45865556162556560续表1型 号额定电压(V)击穿电压V BR(V) I T(mA)最大工作电流I D(μA)钳位电压V C(V)最大脉冲电流I PP(A)最高温度系数%燉℃5KP54 5KP54A 5KP58 5KP58A 5454585860.060.064.464.455551010101096.387.1103.093.652574953706477695KP60 5KP60A 5KP64 5KP64A 6060646466.766.771.171.1555510101010107.096.8114.0103.047524449797085755KP70 5KP70A 5KP75 5KP75A 7070757577.877.883.383.3555510101010125113134121404437419384100905KP78 5KP78A 5KP85 5KP85A 7878858586.786.794.494.455551010101013912615113736403336104941131025KP905KP90A 5KP100 5KP100A 9090100100100100111111555510101010160146179162313428311201091341225KP11011012251019626147电压,并可在承受很大的脉冲电流时钳位浪涌电压,因此,TV S二极管有着非常广泛的应用范围,在各种电路、传输线路及电器设备中,都可提供浪涌电压保护。
TVS常用哪些型号呢？
TVS常⽤哪些型号呢？ ⼤家应该都知道，TVS⼆极管的型号繁多，如果选⽤错误，很容易给电⼦产品带来损伤，那么TVS⼆极管常⽤型号⼤全你了解多少呢，今天东沃电⼦就带领⼤家⼀起来了解⼀下，⼀起来看看详细介绍吧： 1)TVS⼆极管SMAJ系列常⽤型号有： SMAJ5.0CA、SMAJ15CA、SMAJ36CA、SMAJ440A、SMAJ440CA; 2)TVS⼆极管SMF系列常⽤型号有： SMF33CA、SMF36CA、SMF36A、SMF5.0CA、SMF10CA; 3)TVS⼆极管SMBJ系列常⽤型号有： SMBJ5.0CA、SMBJ6.5CA、SMBJ8.0CA、SMBJ15CA、SMBJ22CA、SMBJ24CA、SMBJ26CA、SMBJ30CA、SMBJ36CA、SMBJ440CA; 4)TVS⼆极管SMCJ系列常⽤型号有： SMCJ18A、SMCJ24A、SMCJ24CA、SMCJ30CA、SMCJ33CA、SMCJ33A、SMCJ36A、 SMCJ36CA、SMCJ48A、SMCJ48CA、SMCJ58A、SMCJ64CA; 5)TVS⼆极管P6KE系列TVS管常⽤型号有： P6KE6.8CA、P6KE12CA、P6KE15CA、P6KE22CA、P6KE30CA、P6KE33CA、P6KE36CA、 P6KE150A、P6KE150CA、P6KE350CA、P6KE400A、P6KE400CA、P6KE440A、P6KE440CA、P6KE500A、P6KE500CA、P6KE550A、P6KE550CA、P6KE600A、P6KE600CA; 6)TVS⼆极管1.5KE系列常⽤型号有： 1.5KE6.8A、1.5KE6.8CA、1.5KE18A、1.5KE18CA、1.5KE27A、1.5KE27CA、1.5KE33A、1.5KE33CA、1.5KE440CA; 7)TVS⼆极管3KP系列常⽤型号有： 3KP33CA; 8)TVS⼆极管5KP系列常⽤型号有： 5KP6.5A、5KP6.5CA; 9)TVS⼆极管15KP系列常⽤型号有： 15KP18A、15KP24A、15KP26A、15KP33A; 10)TVS⼆极管SMDJ系列常⽤型号有： SMDJ24A、SMDJ24CA、SMDJ33CA; 11)TVS⼆极管5.0SMDJ系列常⽤型号有 5.0SMDJ24A、5.0SMDJ24CA、5.0SMDJ36A、5.0SMDJ36CA、5.0SMDJ64A、5.0SMDJ68A、5.0SMDJ70A; 12)TVS⼆极管SM8S系列常⽤型号有： SM8S18A、SM8S24A 、SM8S26CA、SM8S30A、SM8S33A 以上TVS管的型号就是在电⼦产品中⽐较常⽤的了，选型⽅⾯如果不太懂也可以关注⼩编咨询，TVS选型还需要在专业技术指导下进⾏选择。
CM300DY-24A中文资料
V CE = V CES , V GE = 0V V GE = V GES , V CE = 0V T j = 25°CT j = 125°C V CC = 600V, I C = 300A, V GE = 15VV CC = 600V, I C = 300A V GE1 = V GE2 = 15VR G = 1.0Ω, Inductive load switching operation I E = 300AI E = 300A, V GE = 0V IGBT part (1/2 module)*1FWDi part (1/2 module)*1Case to fin, Thermal compound Applied (1/2 module)*1,*2I C = 30mA, V CE = 10VI C = 300A, V GE = 15VV CE = 10V V GE = 0V1200±203006003006001890–40 ~ +150–40 ~ +12525003.5 ~ 4.53.5 ~ 4.5400HIGH POWER SWITCHING USEV V A A W °C °C V N • m g10.53.0—4740.9—550180600350250—3.80.0660.12—16mA µA nF nC ns µC V °C/W Ω——2.12.4———1350—————9.0———0.02———————————————————1.07V V 68ns I CES I GES C ies C oes C res Q G t d(on)t rt d(off)t ft rr (Note 1)Q rr (Note 1)V EC(Note 1)R th(j-c)Q R th(j-c)R R th(c-f)R GSymbol ParameterV GE(th)V CE(sat)*1 : Tc, Tf measured point is just under the chips.*2 : Typical value is measured by using Shin-etsu Silicone “G-746”.Note 1. I E , V EC , t rr & Q rr represent characteristics of the anti-parallel, emitter to collector free-wheel diode (FWDi).2. Pulse width and repetition rate should be such that the device junction temp. (T j ) does not exceed T jmax rating.3. Junction temperature (T j ) should not increase beyond 150°C.Collector-emitter voltage Gate-emitter voltage Maximum collector dissipation Junction temperature Storage temperature Isolation voltage WeightG-E Short C-E ShortDC, T C = 80°C *1Pulse (Note 2)Pulse(Note 2)T C = 25°C *1Main terminal to base plate, AC 1 min.Main terminal M6Mounting holes M6Typical valueSymbol ParameterCollector current Emitter currentTorque strength ConditionsUnit Ratings V CES V GES I C I CMI E (Note 1)I EM (Note 1)P C (Note 3)T j T stg V iso———Unit Typ.Limits Min.Max.Test conditionsELECTRICAL CHARACTERISTICS (Tj = 25°C)ABSOLUTE MAXIMUM RATINGS (Tj = 25°C)Collector cutoff current Gate-emitter threshold voltageGate leakage currentCollector-emitter saturation voltageInput capacitance Output capacitanceReverse transfer capacitance Total gate charge Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall timeReverse recovery time Reverse recovery charge Emitter-collector voltage Contact thermal resistance External gate resistanceThermal resistanceHIGH POWER SWITCHING USEHIGH POWER SWITCHING USEHIGH POWER SWITCHING USE。
稳压UPC24A05
Data Sheet G14632EJ3V0DS002BLOCK DIAGRAMABSOLUTE MAXIMUM RATINGS (T A = 25°C, Unless Otherwise Specified)ParameterSymbol Rating Unit Input voltageV IN −0.3 to +36V T otal power consumption P T 20NoteW Operating ambient temperature T A −20 to +85°C Storage temperatureT stg −55 to +150°C Operating junction temperature T J −20 to +150°C Thermal resistance (junction to case)R th (J −C)5°C/W Thermal resistance (junction to ambient)R th (J −A)65°C/WNote Internally limited. When operating junction temperature rise up to 150°C, the internal circuit shutdown outputvoltage.Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for anyparameter. That is, the absolute maximum ratings are rated values at which the product is on the verge of suffering physical damage, and therefore the product must be used under conditions that ensure that the absolute maximum ratings are not exceeded.OUTPUTGNDINPUTData Sheet G14632EJ3V0DS003TYPICAL CONNECTIONC IN :0.1 to 0.47 µF. Be sure to connect to prevent abnormal oscillation. When using capacitors, film capacitors with excellent voltage and temperature characteristics are recommended. Be aware that some monolithic ceramic capacitors have inferior temperature and voltage characteristics. When using a monolithic ceramic capacitor,C IN requires a capacitor that can secure this capacity within the voltage and temperature range used.C OUT :10 µF or higher. Be sure to connect to prevent oscillation and to improve transient load stabilization.Remark Connect C IN and C OUT as close as possible to the IC pins (within 2 cm).D 1:V O > V IN requiredD 2:Shottky barrier diode required for when V O < GND.RECOMMENDED OPERATING CONDITIONSParameterSymbol ConditionMIN.TYP .MAX.Unit Input voltageV INµPC24A05HF 6915V µPC24A12HF 131822V µPC24A15HF162225V Output currentI O All 02A Operating junction temperatureT JAll−20+125°CCaution The recommended operating range may be exceeded without causing any problems provided thatthe absolute maximum ratings are not exceeded. However, if the device is operated in a way that exceeds the recommended operating conditions, the margin between the actual conditions of use and the absolute maximum ratings is small, and therefore thorough evaluation is necessary. The recommended operating conditions do not imply that the device can be used with all values at their maximum values.1ELECTRICAL CHARACTERISTICSµPC24A05 (T J = 25°C, V IN = 9 V, I O = 1 A, Unless Otherwise Specified)Parameter Symbol Condition MIN.TYP.MAX.Unit Output voltage V O4.95.0 5.1V0°C ≤ T J≤ 125°C,4.855.15V6 V ≤ V IN≤ 15 V, 5 mA ≤ I O≤ 2 ALine regulation REG IN 6 V ≤V IN≤ 15 V650mV Load regulation REG L 5 mA ≤I O≤ 2 A350mV Quiescent current I BIASI O= 0 A3 5.0mAI O= 2 A1530mA Quiescent current change∆I BIAS 6 V ≤ V IN≤ 15 V, I O= 2 A20mA Output noise voltage V n10 Hz ≤ f ≤ 100 kHz150µV r.m.s. Ripple rejection R⋅R f = 120 Hz, 6.5 V ≤V IN≤ 16.5 V5060dB Dropout voltage V DIF0°C ≤ T J≤ 125°C, I O= 2 A 1.0V Short circuit current I O short V IN= 15V 1.3A Peak output current I O peak V IN= 9 V 2.8 3.5 4.2A∆V O/∆T0°C ≤ T J ≤ 125°C, I O= 5 mA0.5mV/°C Temperature coefficient ofoutput voltageµPC24A12 (T J= 25°C, V IN = 18 V, I O = 1 A, Unless Otherwise Specified)Parameter Symbol Condition MIN.TYP.MAX.Unit Output voltage V O11.7512.012.25V0°C ≤ T J≤ 125°C,11.6512.35V13 V ≤ V IN≤ 22 V, 5 mA ≤ I O≤ 2 ALine regulation REG IN13 V ≤ V IN≤ 22 V12100mV Load regulation REG L 5 mA ≤ I O≤ 2 A6100mV Quiescent current I BIASI O = 0 A3 5.0mAI O = 2 A1530mA Quiescent current change∆I BIAS13 V ≤ V IN≤ 22 V, I O = 2 A20mA Output noise voltage V n10 Hz ≤ f ≤ 100 kHz220µV r.m.s. Ripple rejection R⋅R f = 120 Hz, 13.5 V ≤ V IN≤ 23.5 V4350dB Dropout voltage V DIF0°C ≤ T J≤ 125°C, I O = 2 A 1.0V Short circuit current I O short V IN = 15 V 1.4A Peak output current I O peak V IN = 18 V 2.8 3.5 4.2A∆V O/∆T0°C ≤ T J≤ 125°C, I O = 5 mA 1.0mV/°C Temperature coefficient ofoutput voltage4Data Sheet G14632EJ3V0DS00µPC24A15 (T J = 25°C, V IN = 22 V, I O = 1 A, Unless Otherwise Specified)Parameter Symbol Condition MIN.TYP.MAX.Unit Output voltage V O14.715.015.3V14.5515.45V0°C ≤ T J≤ 125°C,16 V ≤ V IN≤ 25 V, 5 mA ≤ I O≤ 2 ALine regulation REG IN17 V ≤ V IN≤ 25 V18150mV Load regulation REG L 5 mA ≤ I O≤ 2 A10150mV Quiescent current I BIASI O = 0 A3 5.0mAI O = 2 A1530mA Quiescent current change∆I BIAS17 V ≤ V IN≤ 25 V, I O = 2 A20mA Output noise voltage V n10 Hz ≤ f ≤ 100 kHz260µV r.m.s. Ripple rejection R⋅R f = 120 Hz, 17 V ≤ V IN≤ 27 V4048dB Dropout voltage V DIF0°C ≤ T J≤ 125°C, I O = 2 A 1.0V Short circuit current I O short V IN = 16 V 1.4A Peak output current I O peak V IN = 22 V 2.8 3.5 4.2A∆V O/∆T0°C ≤ T J≤ 125°C, I O = 5 mA 1.6mV/°C Temperature coefficient ofoutput voltageData Sheet G14632EJ3V0DS005Data Sheet G14632EJ3V0DS006TYPICAL CHARACTERISTICS (REFERENCE VALUES)51015205101520201510506543210250200150100500P T vs T A∆V O vs T JP T -T o t a l p o w e r d i s s i p a t i o n -WV O -O u t p u t v o l t a g e -VI B I A S -Q u i e s c e n t c u r r e n t -m AV IN -Input voltage-V(V IN −V O )-Input/output voltage differential-V1.92Data Sheet G14632EJ3V0DS00700.51.0 1.52.01.21.00.80.60.40.2V DIF vs I OV D I F -D r o p o u t v o l t a g e -VI O -Output current-A10100 1 k 10 k 100 kR ⋅R vs ff-Frequency-HzData Sheet G14632EJ3V0DS008PACKAGE DRAWINGSD 17.0±0.33PIN PLASTIC SIP (MP-45G)NOTEEach lead centerline is located within 0.25 mm ofits true position (T.P.) at maximum material condition.ITEM MILLIMETERS P3HF-254B-4G 0.25H 2.54 (T.P.)A 10.0±0.2I 5.0±0.3U 2.4±0.5V Y 8.9±0.7Z1.30±0.2J K L 8.5±0.2B 7.0±0.2C 1.50±0.2E F 0.75±0.10M 8.5±0.2N P2.8±0.23.3±0.2f 2.46±0.25.0±0.24.5±0.20.65±0.10RECOMMENDED SOLDERING CONDITIONSThe µPC2400 Series should be soldered and mounted under the following recommended conditions.For the details of the recommended soldering conditions, refer to the document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).For soldering methods and conditions other than those recommended below, contact your NEC sales representative.Through-Hole DeviceµPC24A05HF, 24A12HF, 24A15HF: 3-Pin Plastic SIP (MP-45G) (Isolated TO-220)Process ConditionsSolder temperature: 260°C or below, Flow time: 10 seconds or less.Wave soldering(only to leads)Caution Apply wave soldering only to the pins and be careful not to bring solder into direct contact with the package.CAUTION ON USE•In the µPC24A00 Series, if the output is short-circuited at V IN≥ 20 V, the output may not be restored after the short-circuit is cancelled. In this case, restore the output by lowering and then reapplying V IN.•If a lower than recommended input voltage is used in the µPC24A00 Series, a large circuit current will flow due to the saturation of the output stage transistor (refer to the reference characteristic curve of the I BIAS−V IN characteristics). The capacitance for the input side power supply therefore needs to be only enough to enable the current to flow in this circuit at startup. Note also that a resistor cannot be inserted at the GND pin to adjust the output voltage.REFERENCE DOCUMENTSQUALITY GRADES ON NEC SEMICONDUCTOR DEVICES C11531ESEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL C10535E SEMICONDUCTORS SELECTION GUIDE X10679E SEMICONDUCTORS SELECTION GUIDE -Product and Packages- (CD-ROM)X13769XData Sheet G14632EJ3V0DS009[MEMO]10Data Sheet G14632EJ3V0DS00[MEMO]Data Sheet G14632EJ3V0DS0011• The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.• No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.• NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual propertyrights of third parties by or arising from use of a device described herein or any other liability arising from useof such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or otherintellectual property rights of NEC Corporation or others.• Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits,software, and information in the design of the customer's equipment shall be done under the full responsibilityof the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information.• While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons orproperty arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.• NEC devices are classified into the following three quality grades:"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications ofa device depend on its quality grade, as indicated below. Customers must check the quality grade of each devicebefore using it in a particular application.Standard: Computers, office equipment, communications equipment, test and measurement equipment,audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robotsSpecial: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disastersystems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support)Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, lifesupport systems or medical equipment for life support, etc.The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance.M7 98. 8。
科尼起重机详细技术参数及图纸
2. 技术参数2.1 Item 1 z 5t x 19.5 m CXTD 双梁葫芦起重机数量 (1)工作载荷......................................................................5 000 kg跨度............................................................................19.5 m起升高度 ...................................................................7.72 m (Max. 9m)钢丝绳葫芦型号............................................................ CXT40410050P4工作级别.................整机.............................................FEM A5起升.............................................FEM M5 (2m)小车运行......................................FEM M5 (2m)大车运行......................................FEM M5 (2m)速度........................起升速度......................................8/1.3m/min 2 - speed小车运行......................................20m/min stepless大车运行......................................40m/min steplessED 电机........................起升电机 .....................................7.5/1.2 kW 60%ED小车运行......................................1 x 0.45 kW 40%ED大车运行......................................2 x 1.1 kW 40%电源........................装机功率......................................10.2 kW主电源电压...................................3Ph / 380 V / 50 Hz控制电压......................................48 V启动电流......................................77.4 A工作电流......................................23.1 A防护等级.................电控箱..........................................IP54电机.............................................IP55整车自重......................................................................8 930 kg最大静轮压...................................................................50.4 kN轨道型号......................................................................P30轨道长度......................................................................?米或与其它车共轨控制方式.................手电门操作，可沿主梁方向自由移动2.2 Item 2 z 5t x 19.5 m CXTD 双梁葫芦起重机数量 (1)工作载荷......................................................................5 000 kg跨度............................................................................19.5 m起升高度 ...................................................................8.62 m (Max. 9m)钢丝绳葫芦型号............................................................ CXT40410050P4工作级别.................整机.............................................FEM A5起升.............................................FEM M5 (2m)小车运行......................................FEM M5 (2m)大车运行......................................FEM M5 (2m)速度........................起升速度......................................8/1.3m/min 2 - speed小车运行......................................20m/min stepless大车运行......................................40m/min steplessED 电机........................起升电机 .....................................7.5/1.2 kW 60%ED小车运行......................................1 x 0.45 kW 40%ED大车运行......................................2 x 1.1 kW 40%电源........................装机功率......................................10.2 kW主电源电压...................................3Ph / 380 V / 50 Hz控制电压......................................48 V启动电流......................................77.4 A工作电流......................................23.1 A防护等级.................电控箱..........................................IP54电机.............................................IP55整车自重......................................................................8 930 kg最大静轮压...................................................................50.4 kN轨道型号......................................................................P30轨道长度......................................................................?米或与其它车共轨控制方式.................手电门操作，可沿主梁方向自由移动2.3 Item 3 z 10t x 19.5 m CXTD 双梁葫芦起重机数量 (1)工作载荷......................................................................10 000 kg跨度............................................................................19.5 m起升高度 ...................................................................8.56 m (Max. 9m)钢丝绳葫芦型号............................................................ CXT50410100P6工作级别.................整机.............................................FEM A5起升.............................................FEM M5 (2m)小车运行......................................FEM M5 (2m)大车运行......................................FEM M5 (2m)速度........................起升速度......................................8/1.3m/min 2 - speed小车运行......................................20m/min stepless大车运行......................................40m/min steplessED 电机........................起升电机 .....................................15/2.5 kW 60%ED小车运行......................................2 x 0.25 kW 40%ED大车运行......................................2 x 1.1 kW 40%电源........................装机功率......................................17.7 kW主电源电压...................................3Ph / 380 V / 50 Hz控制电压......................................48 V启动电流......................................159.2 A工作电流......................................39.2 A防护等级.................电控箱..........................................IP54电机.............................................IP55整车自重......................................................................9 710 kg最大静轮压...................................................................78.2 kN轨道型号......................................................................P30轨道长度......................................................................?米或与其它车共轨控制方式.................手电门操作，可沿主梁方向自由移动2.4 Item 4 z 16/3.2t x 19.5 m CXTD 双梁葫芦起重机数量 (1)工作载荷......................................................................16 000 kg / 3 200 kg跨度............................................................................19.5 m起升高度：主钩 /付钩...................................................8.1 m (Max. 10.5m) / Max 12 m钢丝绳葫芦型号：主钩 /付钩......................................... CXT60410160P6 / CXT40210032P3工作级别.................整机.............................................FEM A5起升：主钩 /付钩..........................FEM M5 (2m) / FEM M4 (1Am)小车运行......................................FEM M5 (2m)大车运行......................................FEM M5 (2m)速度........................起升速度：主钩 /付钩...................4/0.67m/min, 8/1.3m/min 2 - speed小车运行......................................20m/min stepless大车运行......................................40m/min steplessED 电机........................起升电机：主钩 /付钩...................15/2.5 kW, 4.5/0.7 kW 60%ED小车运行......................................2 x 0.30 kW 40%ED大车运行......................................2 x 1.1 kW 40%电源........................装机功率......................................17.8 kW主电源电压...................................3Ph / 380 V / 50 Hz控制电压......................................48 V启动电流......................................159.9 A工作电流......................................39.9 A防护等级.................电控箱..........................................IP54电机.............................................IP55整车自重......................................................................12 400 kg最大静轮压...................................................................117.1 kN轨道型号......................................................................P30轨道长度......................................................................?米或与其它车共轨控制方式.................手电门操作，可沿主梁方向自由移动2.5 Item 5 z 2t x 8 m CXTS 单梁葫芦数量 (1)工作载荷......................................................................2 000 kg跨度............................................................................8 m起升高度 ...................................................................4.82 m (Max. 6m)钢丝绳葫芦型号............................................................ CXT20410020P1工作级别.................整机.............................................FEM A5起升.............................................FEM M5 (2m)小车运行......................................FEM M5 (2m)速度........................起升速度......................................5/0.83m/min 2 - speed小车运行......................................20m/min stepless 电机........................起升电机 .....................................1.8/0.25 kW 60%EDED小车运行......................................1 x 0.30 kW 40%电源........................装机功率......................................2.7 kW主电源电压...................................3Ph / 380 V / 50 Hz控制电压......................................48 V启动电流......................................24.1 A工作电流......................................8.2 A防护等级.................电控箱..........................................IP54电机.............................................IP552.6 Item 6 z 1t x 8 m CXTS 单梁葫芦数量 (1)工作载荷......................................................................1 000 kg跨度............................................................................8 m起升高度 ...................................................................4.28 m (Max. 6m)钢丝绳葫芦型号............................................................ CXT10210010PX工作级别.................整机.............................................FEM A5起升.............................................FEM M5 (2m)小车运行......................................FEM M5 (2m)速度........................起升速度......................................8/1.3m/min 2 - speed小车运行......................................20/5m/min 2 - speed 电机........................起升电机 .....................................1.5/0.25 kW 60%ED小车运行......................................1 x 0.30/0.1 kW 40% ED电源........................装机功率......................................2.4 kW主电源电压...................................3Ph / 380 V / 50 Hz控制电压......................................48 V启动电流......................................18.9 A工作电流......................................7 A防护等级.................电控箱..........................................IP54电机.............................................IP552.7 Item 7 z 0.5t x 4 m XN 环链葫芦数量 (1)工作载荷...................................................................... 500 kg起升高度 ...................................................................3 m环链葫芦型号............................................................... XN 05 504 b2工作级别.................整机.............................................FEM A5起升.............................................FEM M5 (2m) 速度........................起升速度......................................4.0/1.0m/min 2 - speed 电源........................主电源电压...................................3Ph / 380 V / 50 Hz控制电压......................................48 V3. 供货范围KCI 科尼起重机报价供货范围如下:1. 整套CXT小车(葫芦)包括 :- 双速变极起升电机 (6:1)带热敏电阻- 自动调节的起升盘式制动器带摩擦片磨损传感器- 起升上下限位- 小车电气部分- 钢制罩壳, 环氧面漆- 重级制导绳器- 电机IP55/控制柜保护等级 IP54- 变频小车行走电机，带盘式制动器2. 端梁部分包括 :- 端梁钢结构及与主梁连接板- 球墨铸铁制成的行走车轮- 变频行走电机，带盘式制动器- 缓冲器3. 起重机的整套电气部分 :- 主电源开关带电源指示灯- 起升,横移,行走电控开关- 小车拖缆- 起重机上的所有固定电缆- 小车行走限位开关(停止限位)，大车行走限位开关(减速+停止限位)- 所有电机的绝缘等级 F, 保护等级 IP55- 手电门操作4. 提供文本含用户手册, 维修手册和图纸5. 提供客户有关人员的现场培训P3:589M2103P4:+101R 6300 KGD6*******H2H3250M3427212Note:Min R with service platform and second brake Standard rail gauges:1200,1400,1700 and 2000Load ClassHoisting speed (m/min) (kg)Fem/ISO Gear+Motor code:E+P3 F+P3 H+P4 40003m/M6 4/0,7 5/0,8 8/1,3 5000 2m/M5 4/0,7 5/0,8 8/1,3 6300 1Am/M4 4/0,7 - - + weight (kg): - - 20HOL Length M2 M3 H2 H3 min R Weight(m) code (mm)(mm)(mm)(mm) (mm) (kg) 6 B 467 280 565 49 1200 315 9 C 567 280 565 74 1200 325 12 D 667 352 637 99 1400340 15 E787 352 637 129 1400 360CXT4041...D0Hoist type:65R 6D 90D 12083117658858845045030135090138900138366SI-50HzTROLLEY; DOUBLE GIRDER, MEDIUM, 4 ROPE FALLSR722M350-75H2H3M2R 6D 110D 140470900382400982551296648648500500D 63100420421477881481000148Note:Min R with service platform and second brake Standard rail gauges:1400,1700 and 2000HOL Length M2 M3 H2 H3 min R Weight (m) code (mm)(mm)(mm)(mm) (mm) (kg) 9 D 697 259 640 88 1400 670 12 E 817 259 640 118 1400 700 16 F 967 372 753 156 1700745 20 G1157 522 903 204 2000 785Load Class Hoisting speed (m/min) (kg) Fem/ISOGear+Motor code:E+P5 F+P5 H+P6 J+P7 6300 3m/M64/0,7 5/0,8 8/1,310/1,7 80003m/M6 4/0,7 5/0,8 8/1,310/1,7 100002m/M5 4/0,7 5/0,8 8/1,310/1,7 125001Am/M4 4/0,7 - - - + weight (kg):- - 304012500 KGCXT5041...D0Hoist type:P7:+40SI-50HzTROLLEY; DOUBLE GIRDER, MEDIUM, 4 ROPE FALLS102128W2151P 1:498H3258S1D 80437535635D40M 2P 2:+6068H 280520B=80..410480250145S 2C 33293068190T 654300400130B/mm320325200300400500200100500600350365C/mm NOMINAL LOAD 90% NOMINAL LOAD240435600S 3HOL Length M2 H2 H3 S1(mm) S2(mm) S3 T6 W2 Weight (m) code (mm)(mm)(mm) P1 P2 P3 P1 P2 P3(mm)(mm)(mm) (kg) 6 A 431 220 45242300330 22 80110 170 454 332 1809,5 C 561 350 72303303330 83 83110 66 584 462 200Note:S1,S2 are the dimensions to the outermost part in each case, without option cubicleLoad Class Hoisting speed (m/min) (kg) Fem/ISO Gear+Motor code: F+P1 F+P2 G+P2 H+P3 1600 3m/M6 5/0,8 5/0,8 6,3/1,1 8/1,3 2000 2m/M5 5/0,8 5/0,8 6,3/1,1 8/1,3 2500 3m/M6 - 5/0,8 6,3/1,1 8/1,3 3200 2m/M5 - 5/0,8 6,3/1,1 8/1,3 + weight (kg): - 10 1013Hoist type:CXT2041..L0CXT3041..L0 P 3:+90Konecranes reserves the right to alter or amend the above information without noticeCXT Product FileQA-L-04D002080-A_4SI-50Hz2004-04-20TROLLEY; LOW HEADROOM, 4 ROPE FALLS D002080-A_4.vxp 2006-01-25 11:31M i n .230M A X .S T A T I C W H E E L L O A D 50.4k N M i n .2301974431003550870019500C L D B 01B 2L O W E S T P O I N T O F R O O F O R O T H E R E Q U I P M E N T (L I G H T S ...)E C 20-3175-L 40996C 0000-N R A I L P 30D R A W I N G N O T I N S C A L E B R I D G E P A I N T :A 120/R A L 1028T O L E R A N C E S A C C .T O C S T 00A 17099J Y 20100012007200M a x .3501130M i n .30M a x .150R A I L P 30M i n .554899150012005t A 66961403A35M i n .590T E C H N I C A L D A T A S P A N ...............................L I F T I N G H E I G H T ............H O I S T I N G S P E E D ..........T R A V E R S I N G S P E E D ....T R A V E L L I N G S P E E D .....W E I G H T O F T R O L L E Y ...W E I G H T O F B R I D G E .....P O W E R S U P P L Y ............C R A N E G R O U P ..............H O I S T M A C H I N E R Y G R B R I D G E T R A V E L G R O U S U P P L Y P O W E R ............L E N G T H O F R U N W A Y ...L O A D ...............................M i n .5907720680300631590150100=C X T 40410050P 4P o w e r s u p p l y l i n e C A B L E C H A N N E LM i n .230M A X .S T A T I C W H E E L L O A D 50.4k N M i n .2301974431003550960019500C L D B 01B 2L O W E S T P O I N T O F R O O F O R O T H E R E Q U I P M E N T (L I G H T S ...)E C 20-3175-L 40996C 0000-N R A I L P 30D R A W I N G N O T I N S C A L E B R I D G E P A I N T :A 120/R A L 1028T O L E R A N C E S A C C .T O C S T 00A 17999J Y 20100012008100M a x .3501130M i n .30M a x .150R A I L P 30M i n .554899150012005t A 75961403A35M i n .590T E C H N I C A L D A T A S P A N ...............................L I F T I N G H E I G H T ............H O I S T I N G S P E E D ..........T R A V E R S I N G S P E E D ....T R A V E L L I N G S P E E D .....W E I G H T O F T R O L L E Y ...W E I G H T O F B R I D G E .....P O W E R S U P P L Y ............C R A N E G R O U P ..............H O I S T M A C H I N E R Y G R B R I D G E T R A V E L G R O U S U P P L Y P O W E R ............L E N G T H O F R U N W A Y ...L O A D ...............................M i n .5908620680300711590150100=C X T 40410050P 4P o w e r s u p p l y l i n e C A B L E C H A N N E LM i n .230M A X .S T A T I C W H E E L L O A D 78.2k N M i n .2301974431003550970019500C L D B 01B 2L O W E S T P O I N T O F R O O F O R O T H E R E Q U I P M E N T (L I G H T S ...)E C 20-3175-L 51086C 0000-N R A I L P 30D R A W I N G N O T I N S C A L E B R I D G E P A I N T :A 120/R A L 1028T O L E R A N C E S A C C .T O C S T 00A 17980J Y U /K S C 2007-12-310t C X T D C r a F o x c o n n S h e n S h e n y a n g C X T D 10t x 100013008100M a x .3501130M i n .30M a x .150R A I L P 30M i n .4548801600140010t A 76961284A59M i n .650T E C H N I C A L D A T A S P A N ........................................L I F T I N G H E I G H T ......................H O I S T I N G S P E E D ...................T R A V E R S I N G S P E E D .............T R A V E L L I N G S P E E D ..............W E I G H T O F T R O L L E Y ............W E I G H T O F B R I D G E ..............P O W E R S U P P L Y .....................C R A N E G R O U P .......................H O I S T M A C H I N E R Y G R O U P ...B R I D G E T R A V E L G R O U P ........S U P P L Y P O W E R ......................L E N G T H O F R U N W A Y .............L O A D ........................................M i n .6508558842300841590150100==A -A C X T 50410100P 6P o w e r s u p p l y l i n e C A B L E C H A N N E LVIEW A-A ACCEPTED BY:COMPANY:DATE:DAS Ref drawing Vx proj Date 29.11.2007Amount SpecificationM-film Description Chd Dept Appd Design T w i n c o p y Issue JYU/KSCKonecranes (Shanghai(Company Ltd.)Dalian Branch 17:59CXTD 16/3.2t x 19.5m Hol:8.1m SPCXTD16/3.2tx19.5m-8.1m-O Foxconn Shenyang Shenyang,110168,15NanDong Road,HunNan new District,Pos 1:40: 16000 kg / 3200 kg : 19.5 m : 8.097 m : 4/0.67 m/min 2-speed : 8/1.3 m/min : 20 m/min stepless : 40 m/min stepless : 1970 kg : 10400 kg : 380/48 V ; 50 Hz : A5 : FEM M5 (2m) : FEM M4 (1Am) : FEM M5 (2m) : 17,8 kW : 50 m LOAD SPAN LIFTING HEIGHT HOISTING SPEED HOISTING SPEED AUX TRAVERSING SPEED TRAVELLING SPEEDWEIGHT OF TROLLEYWEIGHT OF BRIDGEPOWER SUPPLYCRANE GROUPHOIST GROUPHOIST GROUP AUXCRANE DRIVE GROUPSUPPLY POWERLENGTH OF RUNWAYTECHNICAL DATA : RAL1028: A/120RUNWAY TOLERANCES ACC.TO DIN4132CRANE TOLERANCES ACC.TO DRAWING CST00A1INDOOR USE CRANE SURFACE TREATMENT OF CRANE BRIDGE COLOR PAINT 3724310019771MAX.STATIC WHEEL LOAD 117.1 kN CXT60410160P6CXT40210032P318811843648941251501700985159616/3.2tKonecranes P30855752629170713819551000785180977726300150081009900MIN. 244SPAN 19500MIN. 244AA。
24VAC±20% 50 60Hz 9.5VA电源驱动型电机说明书
† Use flexible metal conduit. Push the listed conduit fitting device over the actuator’s cable to butt against the enclosure. Screw in conduit connector. Jacket the actuators input wiring with listed flexible conduit. Properly terminate the conduit in a suitable junction box. Rated impulse Voltage 800V. Type of action 1. Control pollution degree 3.AVKX24-3On/Off, Floating Point, Electronic Fail-Safe, Linear, 24 VD a t e c r e a t e d , 11/03/2016 - S u b j e c t t o c h a n g e . © B e l i m o A i r c o n t r o l s (U S A ), I n c .Meets cULus requirements without the need of an electrical groundconnection.Provide overload protection and disconnect as required.Actuators may be connected in parallel. Power consumption and inputimpedance must be observed.Control signal may be pulsed from either the Hot (Source) or Common(Sink) 24 VAC line.Actuators may be connected in parallel if not mechanically linked. Powerconsumption and input impedance must be observed.Actuators with plenum cable do not have numbers; use color codes instead.!WARNING! LIVE ELECTRICAL COMPONENTS!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.AVKX24-3On/Off, Floating Point, Electronic Fail-Safe, Linear, 24 VD a t e c r e a t e d , 11/03/2016 - S u b j e c t t o c h a n g e . © B e l i m o A i r c o n t r o l s (U S A ), I n c .。
三菱通用变频器控制器CM100DY-24A
三菱通用变频器控制器CM100DY-24A三菱通用变频器控制器CM100DY-24A，通用变频器，伺服驱动器，电源装置，电梯，电焊机，逆变焊机，感应加热器，轨道交通、显示装置，马达控制，焊接机器人，机车主变流器，辅助变流器以及新兴的风力发电、太阳能光伏发电、电动车等新能源行业等领域。
三菱A系列： CM100DY-24A，CM200DY-24A，CM150DY-24A，CM300DY-24A，CM400DY-24A，CM600DY-24A，CM150DY-34A三菱NF系列：CM150DY-12NF，CM200DY-12NF，CM300DY-12NF，CM400DY-12NF，CM600DY-12NFCM100DY-24NF，CM150DY-24NF，CM200DY-24NF，CM300DY-24NF，CM400DY-24NF，CM150RL-24NF，CM100RL-24NF，CM50TL-24NF，CM600DY-12NF，CM900DU-24NF三菱H系列： CM100DY-12H，CM75DY-24H，CM100DY-24H，CM200DY-24H，CM300DY-24H，CM300DU-24H，CM150DU-24NFH三菱PS系列: PS21564-P，PS219A5-ASTX，PS219A4-ASTX，PS21865-AP，PS21867-AP，PS21869-AP，PS21765，PS21767，PS22A73，PS22A74，PS22053，PS22054，PS21267-AP，PS21563-P三菱IPM系列：PM300RL1A060，PM20CSJ060，PM30CSJ060，PM50RL1A120，PM75RL1A120，PM100RL1A120，PM150RL1A120，PM100CL1A120，PM150CL1A120，PM25RLA120，PM30CTJ060-3，PM50CLA060，PM100RLB060，PM300CLA120，PM200RL1A060，PM75CL1A120，PM25CL1A120，PM25RL1A120，PM150RL1A060电梯用IPM变频器模块：PM150RSE120,PM100RSE120,CM900DU-24NF三菱驱动电路：M57962L，M57962AL，M57959L，M57962L-01R，M57962AL-01R，M57959L-01R型号与规格参数封装整包装数CM100DY-24A 100A/1200V 两单元模组 9 PCSCM150DY-24A 150A/1200V 两单元模组 9 PCSCM200DY-24A 200A/1200V 两单元模组 9 PCSCM300DY-24A 300A/1200V 两单元模组 6 PCSCM400DY-24A 400A/1200V 两单元模组 6 PCSCM600DY-24A 600A/1200V 两单元模组 6 PCSCM50MX-24A 50A/1200V 模组CM300DX-12A 300A/600V 模组 3 PCSCM150DY-34A 150A/1700V 两单元模组 6 PCS型号与规格参数封装整包装数CM150DY-12NF 150A/600V 两单元模组 9 PCSCM200DY-12NF 200A/600V 两单元模组 9 PCSCM300DY-12NF 300A/600V 两单元模组 9 PCSCM400DY-12NF 400A/600V 两单元模组 6 PCSCM100DY-24NF 100A/1200V 两单元模组 9 PCSCM150DY-24NF 150A/1200V 两单元模组 9 PCSCM200DY-24NF 200A/1200V 两单元模组 9 PCSCM300DY-24NF 300A/1200V 两单元模组 6 PCSCM400DY-24NF 400A/1200V 两单元模组 6 PCSCM600DY-12NF 600A/1200V 两单元模组 6 PCSCM150RL-24NF 150A/1200V 七单元模组 7 PCSCM100RL-24NF 100A/1200V 七单元模组 7PCSCM50TL-24NF 50A/1200V 六单元模组 4 PCSCM600DY-12NF 600A/600V 2单元模组 6 PCSCM900DU-24NF 900A/1200V 模组 1 PCS型号与规格参数封装整包装数CM100DY-12H 100A/600V 两单元模组 10 PCS CM75DY-24H 75A/1200V 两单元模组 6 PCS CM100DY-24H 100A/1200V 两单元模组 6 PCS CM200DY-24H 200A/1200V 两单元模组 4 PCS CM300DY-24H 300A/1200V 两单元模组 4 PCS CM300DU-24H 300A/1200V 两单元模组 6 PCS CM150DU-24NFH 150A/1200V 模组 9 PCS型号与规格参数封装整包装数PS21564-P 15A/600V 模组 10/管PS219A5-ASTX 模组 10/管PS219A4-ASTX 15A/600V 模组 10/管PS21865-AP 20A/600V 模组 10/管PS21867-AP 30A/600V 模组 10/管PS21869-AP 50A/600V 模组 10/管PS21765 20A/600V 模组 10/管PS21767 30A/600V 模组 10/管PS21265-AP 20A/600 模组 6个/管PS22A73 10A/1200V 模组第四代PS22A74 15A/1200V 模组第四代PS22053 10A/1200V 模组PS22054 15A/1200V 模组PS21267-AP 30A/600V 模组第3.5代PS21563-P 10A/600V 模组型号与规格参数封装整包装数PM20CSJ060 20A/600V 模组 10 PCS PM30CSJ060 30A/600V 模组 10 PCS PM50RL1A120 50A/1200V 模组 4 PCSPM75RL1A120 75A/1200V 模组 4 PCSPM100RL1A120 100A/1200V 模组 5 PCSPM150RL1A120 150A/1200V 模组 5 PCSPM150RL1A060 150A/600V 模组 5 PCSPM100RLA120 100A/1200V 模组 5 PCSPM150RLA120 150A/1200V 模组 5 PCSPM100CL1A120 100A/1200V 模组 5 PCSPM150CL1A120 150A/1200V 模组 5 PCSPM25RLA120 25A/1200V 模组 4 PCSPM30CTJ060-3 30A/600V 模组 10 PCSPM50CLA060 50A/600V 模组 4 PCSPM100RLB060 100A/600V 模组 4 PCSPM300CLA120 300A/1200V 模组 4PCSPM200RL1A060 200A/600V 模组 4PCSPM75CL1A120 75A/1200V 模组 4PCSPM25CL1A120 25A/1200V 模组 6PCSPM25RL1A120 25A/1200V 模组 4PCS三菱驱动电路：M57962L，M57962AL，M57959L，M57962L-01R，M57962AL-01R，M57959L-01Rm57962l与m57962al 前者保护时间是固定的，后者的保护时间可以调整,引脚功能是一样的。
液晶电视LPL24A电源的培训资料
外接电阻到地，设定灯管频率
外接RC到地，设定burst-mode的频率和最小占空比这两个参数是要对应屏规格进行设定的，如屏T240XW01 V0对应要求分别是 140~240Hz, 和20%~100%
IC允许模拟电平和PWM调光皆可，LPL24A使用模拟电平调光该脚 0~1.2V 分别对应 最小调光占空比 和 最大调光占空比
MP1007
电流取样，调整占空比如此脚低于1.1V, 则认为灯管开路，经一定延迟后保护短路保护，反馈信号必缺正半周或负半周或完全没有，即低于1.1V
同1脚
外接电容到地，设定保护延迟时间，当FT脚上升到1.2V即保护一般保护时，FT脚对外接电容以1uA充电快速短路保护时(指15,16脚超过0.95V)， FT脚对外以100uA充电
调光(DIM)输入脚
灯管开路电压反馈脚2
灯管开路电压反馈脚1
下管(NMOS)驱动输出脚
上管驱动电压(VIN-9.3V)
VCC工作电压输入
地
LPL24A 高压INVERTER控制 IC介绍
MP1007规格书
反馈补偿脚
使能脚, OFF﹤1.2V, 2V﹤ON
上管(PMOS)驱动输出脚
下管驱动电压(GND+9.3V)
24V
2.5V
12V
13.5~14.5V
14~15V
1 LI12 LI23 COMP4 FT5 EN6 FSET7 BOSC8 DBRT
OV2 16OV1 15GND 14LG 13VN 12VP 11UG 10VIN 9
灯管电流反馈脚1
灯管电流反馈脚2
失效指示脚
开关(灯管)频率设定脚
调光频率设定脚
5kp30a二极管参数
5kp30a二极管参数摘要：1.二极管的基本概念与作用2.5kp30a二极管的参数解析3.5kp30a二极管的应用领域4.如何选择合适的5kp30a二极管5.总结正文：一、二极管的基本概念与作用二极管是一种半导体器件，具有单向导通的特性。
它主要由P型半导体、N型半导体以及它们之间的PN结构组成。
当正向电压加在二极管上时，P型半导体与N型半导体之间的PN结处于导通状态，二极管呈现低电阻；而当反向电压加在二极管上时，PN结处于截止状态，二极管呈现高电阻。
二极管在电子设备中有着广泛的应用，如整流、稳压、开关等。
二、5kp30a二极管的参数解析5kp30a二极管是一种快速恢复二极管，具有较高的正向电压和较低的反向漏电流。
以下是5kp30a二极管的主要参数：1.正向电压：V Forward ≈ 1.1V2.反向电压：V Reverse ≈ 5kV3.正向电流：I Forward ≈ 30A4.反向漏电流：I Reverse ≈ 100nA5.动态阻抗：Z Dynamic ≈ 1Ω三、5kp30a二极管的应用领域5kp30a二极管因其优异的性能，广泛应用于以下领域：1.电源设备：如整流器、稳压器等，用于将交流电转换为直流电或调整电压。
2.照明设备：如LED灯，用于照明、显示等场合。
3.通信设备：如光纤通信、无线通信等，用于实现信号传输。
4.电子仪器：如示波器、频谱分析仪等，用于测量和分析电信号。
四、如何选择合适的5kp30a二极管在选择5kp30a二极管时，需要考虑以下因素：1.工作电压：应根据电路需求选择合适的工作电压等级的二极管。
2.电流容量：根据电路中的电流需求选择合适的电流容量。
3.正向电压降：选择较低的正向电压降可以降低功耗。
4.反向漏电流：较低的反向漏电流可以提高设备的可靠性。
5.封装形式：根据应用场景和安装空间选择合适的封装形式。
五、总结5kp30a二极管作为一种快速恢复二极管，具有优异的性能和广泛的应用领域。
5kp30a二极管参数
5kp30a二极管参数【原创实用版】目录1.5kp30a 二极管概述2.5kp30a 二极管的主要参数3.5kp30a 二极管的应用领域正文【5kp30a 二极管概述】5kp30a 二极管是一种半导体器件，具有单向导通特性，广泛应用于电子设备中。
二极管通常有两个电极，分别是正极（称为阳极或“+”极）和负极（称为阴极或“-”极）。
当电流从正极流向负极时，二极管处于正向导通状态；当电流从负极流向正极时，二极管处于反向截止状态。
这种单向导通特性使得二极管在电路设计中有着很多实用功能，例如整流、限幅、开关等。
【5kp30a 二极管的主要参数】5kp30a 二极管的参数主要包括以下几个方面：1.正向电压（Vf）：正向电压是指二极管正向导通时的电压。
对于5kp30a 二极管，正向电压一般在 0.7V 左右。
2.反向电压（Vr）：反向电压是指二极管反向截止时的电压。
对于5kp30a 二极管，反向电压一般在 50V 左右。
3.正向电流（If）：正向电流是指二极管正向导通时的电流。
对于5kp30a 二极管，正向电流一般在 30A 左右。
4.反向漏电流（Ir）：反向漏电流是指二极管在反向电压作用下，流经二极管的电流。
对于 5kp30a 二极管，反向漏电流一般在 10nA 左右。
【5kp30a 二极管的应用领域】5kp30a 二极管广泛应用于各种电子设备和电路中，例如：1.电源整流：5kp30a 二极管可用于整流电路，将交流电转换为直流电，为电子设备提供稳定的电源。
2.电压限幅：在电压跟随器、比较器等电路中，5kp30a 二极管可起到限幅作用，保护电路免受过高电压的损害。
3.开关电路：5kp30a 二极管可用于开关电路，实现对电路通断的控制。
4.信号调制：在信号调制电路中，5kp30a 二极管可作为调制元件，实现信号的调制和解调。
5kp33a二极管参数
5kp33a二极管参数5KP33A二极管是一种具有特殊参数的二极管，本文将对其参数进行详细的介绍和解释。
我们来了解一下5KP33A二极管的主要参数。
该二极管的额定反向峰值电压为33伏特，正向电流为5安培，最大反向电流为150微安培，且具有快速响应的特性。
这些参数对于理解和应用该二极管非常关键。
5KP33A二极管的额定反向峰值电压为33伏特，这意味着当二极管反向电压小于或等于33伏特时，它将保持正常工作状态。
超过这个电压，二极管可能会发生击穿现象，导致其性能丧失或损坏。
因此，在实际应用中，我们需要根据具体情况来选择合适的二极管。
正向电流是指在正向工作状态下通过二极管的电流。
对于5KP33A二极管而言，正向电流为5安培，这意味着在正向电压下，当电流小于或等于5安培时，二极管将正常工作。
超过这个电流，二极管可能会受到过载而损坏。
因此，在设计电路时，我们需要根据电流需求来选择适当的二极管。
最大反向电流是指在反向工作状态下通过二极管的最大电流。
对于5KP33A二极管而言，最大反向电流为150微安培。
这意味着在反向电压下，当电流小于或等于150微安培时，二极管将正常工作。
超过这个电流，二极管可能会受到损坏。
因此，在应用中，我们需要根据电流需求和最大反向电流来确定是否选择5KP33A二极管。
5KP33A二极管还具有快速响应的特性。
这意味着当电压或电流发生变化时，该二极管能够迅速响应并调整其工作状态。
这使得它在需要快速切换或调整的电路中非常有用，例如在功率电子设备和通信设备中的应用。
5KP33A二极管具有额定反向峰值电压为33伏特，正向电流为5安培，最大反向电流为150微安培和快速响应的特性。
这些参数对于正确选择和应用该二极管非常重要。
在实际应用中，我们需要根据具体电路需求来选择合适的二极管，并确保其工作在安全范围内，以实现电路的稳定和可靠工作。
瑞凌气500保焊机电流也压参照表
瑞凌气500保焊机电流也压参照表摘要：一、瑞凌气500 保焊机电流电压参照表简介1.瑞凌气500 保焊机的特点2.电流电压参照表的作用二、瑞凌气500 保焊机电流电压参照表详细参数1.电流参数2.电压参数3.参数对应的应用场景三、瑞凌气500 保焊机电流电压参照表使用方法1.如何选择合适的电流电压参数2.如何根据实际情况进行调整3.注意事项四、瑞凌气500 保焊机电流电压参照表的应用领域1.常见行业应用2.适用范围正文：瑞凌气500 保焊机电流电压参照表是针对瑞凌气500 保焊机而设计的一种参数参考工具，旨在帮助用户更好地掌握电流和电压的调整技巧，从而提高焊接质量。
瑞凌气500 保焊机以其出色的性能和稳定的输出在焊接设备市场上广受好评。
在电流电压参照表中，我们可以看到详细的电流和电压参数。
这些参数是经过严格的实验和实际应用验证得出的，具有较高的参考价值。
用户可以根据这些参数，结合实际情况进行调整，从而达到最佳的焊接效果。
在使用电流电压参照表时，用户需要先了解焊接材料、焊接方法以及焊接要求，然后根据这些信息选择合适的电流电压参数。
在实际操作过程中，用户还需要根据焊接过程中的实际情况进行微调，以保证焊接质量。
同时，参照表也提供了一些注意事项，如避免过载使用、定期检查设备等，以确保设备的安全稳定运行。
瑞凌气500 保焊机电流电压参照表广泛应用于各种焊接领域，如汽车制造、船舶制造、钢铁建筑等。
在这些行业中，焊接质量直接影响到产品的质量和安全，因此，瑞凌气500 保焊机电流电压参照表的准确性和实用性显得尤为重要。
总之，瑞凌气500 保焊机电流电压参照表是一个实用的工具，可以帮助用户更好地掌握电流和电压的调整技巧，提高焊接质量。
5kp24a二极管参数
5kp24a二极管参数
5KP24A是一款常见的二极管，它具有许多独特的特性和功能。
这款二极管适用于各种电子设备和电路，如电源管理系统、逆变器和电流调节器等。
下面将介绍一些与5KP24A二极管相关的重要信息。
5KP24A二极管的最大功耗为5000瓦特，这意味着它可以处理相当大的功率。
这使得它成为许多高功率应用中的理想选择。
此外，5KP24A二极管具有快速的反应速度，可以快速地将电流引导到所需的方向。
这对于需要迅速响应的电路来说非常重要。
5KP24A二极管具有较高的击穿电压和击穿电流。
这使得它能够在电路中起到保护作用，防止过电压和过电流对其他元件造成损害。
因此，它经常被用作电源保护器件，特别是在需要处理大功率和高电压的情况下。
5KP24A二极管还具有低反向电流的特性。
这意味着当二极管处于反向偏置时，很少有电流流过它。
这在一些精密电子设备中非常重要，因为它可以有效地减少功耗和电路噪声。
5KP24A二极管还具有优良的温度特性。
它可以在较宽的温度范围内正常工作，从而使其适用于各种环境条件下的应用。
5KP24A二极管是一款功能强大且多用途的电子元件。
它的高功率处理能力、快速的反应速度、保护功能以及稳定的温度特性使得它在各种电子设备和电路中都有着广泛的应用。
无论是在家庭电子产
品还是工业应用中，5KP24A二极管都能发挥重要作用，为电子系统的正常运行提供保障。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
5KP5.0 thru 5KP188AVishay General SemiconductorT RANS Z ORB ® Transient Voltage SuppressorsFEATURES•P600, glass passivated chip junction •Available in uni-directional polarity only •5000 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % •Excellent clamping capability •Very fast response time•Low incremental surge resistance •Solder dip 260 °C, 40 s•Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONSUse in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication.MECHANICAL DATACase: Molded epoxy body over passivated junction Molding compound meets UL 94 V-0 flammability ratingBase P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, high reliability/automotive grade (AEC Q101 qualified)Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102E3 suffix meets JESD 201 class 1A whisker test, HE3suffix meets JESD 201 class 2 whisker test Polarity:Color band denotes cathode endPRIMARY CHARACTERISTICSVWM 5.0 V to 188 V P PPM 5000 W P D 8.0 W I FSM 500 A T J max.175 °CCase Style P600Notes:(1) Non-repetitive current pulse, per Fig. 3 and derated above T A = 25 °C per Fig. 2(2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximumMAXIMUM RATINGS (T A = 25°C unless otherwise noted)PARAMETERSYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 µs waveform (1)P PPM 5000W Peak pulse current with a 10/1000 µs waveform (1)I PPM See next tableA Power dissipation on infinite heatsink at T L = 75 °C (Fig. 5)P D 8.0W Peak forward surge current 8.3 ms single half sine-wave (Fig. 5)I FSM 600A Instantaneous forward voltage at 100 A (2)V F 3.5V Operating junction and storage temperature range T J , T STG- 55 to + 175°C5KP5.0 thru 5KP188AVishay General SemiconductorELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)DEVICE TYPEBREAKDOWN VOLTAGE V BR(V) (1)TEST CURRENT AT I T (mA)STAND-OFF VOLTAGE V WM (V)MAXIMUM REVERSE LEAKAGE AT V WM I D (µA)MAXIMUM PEAK PULSE CURRENT I PPM (2) (A)MAXIMUM CLAMPING VOLTAGE AT I PPMV C (V)MAXIMUMTEMPERATURE COEFFICIENTOF V BR (%/°C)MIN.MAX.5KP5.0 6.40 7.30 50 5.0 2000 521 9.6 0.057 5KP5.0A 6.40 7.00 50 5.0 2000 543 9.2 0.057 5KP6.0 6.67 8.15 50 6.0 5000 439 11.4 0.061 5KP6.0A 6.67 7.37 50 6.0 5000 485 10.3 0.061 5KP6.5 7.22 8.82 50 6.5 2000 407 12.3 0.065 5KP6.5A 7.22 7.98 50 6.5 2000 446 11.2 0.065 5KP7.0 7.78 9.51 50 7.0 1000 376 13.3 0.068 5KP7.0A 7.78 8.60 50 7.0 1000 417 12.0 0.068 5KP7.5 8.33 10.2 5.0 7.5 250 350 14.3 0.073 5KP7.5A 8.33 9.21 5.0 7.5 250 388 12.9 0.073 5KP8.0 8.89 10.9 5.0 8.0 150 333 15.0 0.075 5KP8.0A 8.89 9.83 5.0 8.0 150 368 13.6 0.075 5KP8.5 9.44 11.5 5.0 8.5 50 314 15.9 0.078 5KP8.5A 9.44 10.4 5.0 8.5 50 347 14.4 0.078 5KP9.0 10.0 12.2 5.0 9.0 20 296 16.9 0.081 5KP9.0A 10.0 11.1 5.0 9.0 20 325 15.4 0.081 5KP10 11.1 13.6 5.0 10.0 15 266 18.8 0.084 5KP10A 11.1 12.3 5.0 10.0 15 294 17.0 0.084 5KP11 12.2 14.9 5.0 11.0 10 249 20.1 0.086 5KP11A 12.2 13.5 5.0 11.0 10 275 18.2 0.086 5KP12 13.3 16.3 5.0 12.0 5.0 227 22.0 0.088 5KP12A 13.3 14.7 5.0 12.0 5.0 251 19.9 0.088 5KP13 14.4 17.6 5.0 13.0 2.0 210 23.8 0.090 5KP13A 14.4 15.9 5.0 13.0 2.0 233 21.5 0.090 5KP14 15.6 19.1 5.0 14.0 2.0 194 25.8 0.092 5KP14A 15.6 17.2 5.0 14.0 2.0 216 23.2 0.092 5KP15 16.7 20.4 5.0 15.0 2.0 186 26.9 0.094 5KP15A 16.7 18.5 5.0 15.0 2.0 205 24.4 0.094 5KP16 17.8 21.8 5.0 16.0 2.0 174 28.8 0.096 5KP16A 17.8 19.7 5.0 16.0 2.0 192 26.0 0.096 5KP17 18.9 23.1 5.0 17.0 2.0 164 30.5 0.097 5KP17A 18.9 20.9 5.0 17.0 2.0 181 27.6 0.097 5KP18 20.0 24.4 5.0 18.0 2.0 155 32.2 0.098 5KP18A 20.0 22.1 5.0 18.0 2.0 171 29.2 0.098 5KP20 22.2 27.1 5.0 20.0 2.0 140 35.8 0.099 5KP20A 22.2 24.5 5.0 20.0 2.0 154 32.4 0.099 5KP22 24.4 29.8 5.0 22.0 2.0 127 39.4 0.100 5KP22A 24.4 26.9 5.0 22.0 2.0 141 35.5 0.100 5KP24 26.7 32.6 5.0 24.0 2.0 116 43.0 0.101 5KP24A 26.7 29.5 5.0 24.0 2.0 129 38.9 0.101 5KP26 28.9 35.3 5.0 26.0 2.0 107 46.6 0.101 5KP26A 28.9 31.9 5.0 26.0 2.0 119 42.1 0.101 5KP26A 28.9 31.9 5.0 26.0 2.0 119 42.1 0.101 5KP28 31.1 38.0 5.0 28.0 2.0 100 50.1 0.102 5KP28A 31.1 34.4 5.0 28.0 2.0 110 45.4 0.102 5KP30 33.3 40.7 5.0 30.0 2.0 93.5 53.5 0.103 5KP30A 33.3 36.8 5.0 30.0 2.0 103 48.4 0.103 5KP33 36.7 44.9 5.0 33.0 2.0 84.7 59.0 0.104 5KP33A 36.7 40.6 5.0 33.0 2.0 93.8 53.3 0.104 5KP36 40.0 48.9 5.0 36.0 2.0 77.8 64.3 0.104 5KP36A 40.0 44.2 5.0 36.0 2.0 86.1 58.1 0.1045KP5.0 thru 5KP188AVishay General SemiconductorNotes:(1) Pulse test: t p ≤ 50 ms(2) Surge current waveform per Fig. 3 and derate per Fig. 2(3) All items and symbols are consistent with ANSI/IEEE C62.355KP40 44.4 54.3 5.0 40.0 2.0 70.0 71.4 0.1055KP40A 44.4 49.1 5.0 40.0 2.0 77.5 64.5 0.105 5KP43 47.8 58.4 5.0 43.0 2.0 65.2 76.7 0.105 5KP43A 47.8 52.8 5.0 43.0 2.0 72.0 69.4 0.105 5KP45 50.0 61.1 5.0 45.0 2.0 62.3 80.3 0.106 5KP45A 50.0 55.3 5.0 45.0 2.0 68.8 72.7 0.106 5KP48 53.3 65.2 5.0 48.0 2.0 58.5 85.5 0.106 5KP48A 53.3 58.9 5.0 48.0 2.0 64.6 77.4 0.106 5KP51 56.1 69.3 5.0 51.0 2.0 54.9 91.1 0.107 5KP51A 56.7 62.7 5.0 51.0 2.0 60.7 82.4 0.107 5KP54 60.0 73.3 5.0 54.0 2.0 51.9 96.3 0.107 5KP54A 60.0 66.3 5.0 54.0 2.0 57.4 87.1 0.107 5KP58 64.4 78.7 5.0 58.0 2.0 48.5 103 0.107 5KP58A 64.4 71.2 5.0 58.0 2.0 53.4 94 0.107 5KP60 66.7 81.5 5.0 60.0 2.0 46.7 107 0.108 5KP60A 66.7 73.7 5.0 60.0 2.0 51.7 97 0.108 5KP64 71.1 96.9 5.0 64.0 2.0 43.9 114 0.108 5KP64A 71.1 78.6 5.0 64.0 2.0 48.5 103 0.108 5KP70 77.6 95.1 5.0 70.0 2.0 40.0 125 0.108 5KP70A 77.8 86.0 5.0 70.0 2.0 44.2 113 0.108 5KP75 83.3 102 5.0 75.0 2.0 37.3 134 0.108 5KP75A 83.3 92.1 5.0 75.0 2.0 41.3 121 0.108 5KP78 86.7 106.0 5.0 78.0 2.0 36.0 139 0.108 5KP78A 86.7 95.8 5.0 78.0 2.0 39.7 126 0.108 5KP85 94.4 115 5.0 85.0 2.0 33.1 151 0.108 5KP85A 94.4 104 5.0 85.0 2.0 36.5 137 0.110 5KP90 100 122 5.0 90.0 2.0 31.3 160 0.110 5KP90A 100 111 5.0 90.0 2.0 34.2 146 0.110 5KP100 111 136 5.0 100 2.0 27.9 179 0.110 5KP100A 111 123 5.0 100 2.0 30.9 162 0.110 5KP110 122 149 5.0 110 2.0 25.5 196 0.112 5KP110A 122 135 5.0 110 2.0 28.2 177 0.112 5KP120 133 163 5.0 120 2.0 23.4 214 0.112 5KP120A 133 147 5.0 120 2.0 25.9 193 0.112 5KP130 144 176 5.0 130 2.0 21.6 230 0.112 5KP130A 144 159 5.0 130 2.0 23.9 209 0.112 5KP150 167 204 5.0 150 2.0 18.7 268 0.112 5KP150A 167 185 5.0 150 2.0 20.6 243 0.112 5KP160 178 218 5.0 160 2.0 17.4 287 0.112 5KP160A 178 197 5.0 160 2.0 19.3 259 0.112 5KP170 189 231 5.0 170 2.0 16.4 304 0.112 5KP170A 189 209 5.0 170 2.0 18.2 275 0.112 5KP188 209 255 5.0 188 2.0 14.5 344 0.112 5KP188A 209 231 5.0 188 2.0 15.2 328 0.112 ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)DEVICE TYPEBREAKDOWN VOLTAGE V BR(V) (1)TEST CURRENT AT I T (mA)STAND-OFF VOLTAGE V WM (V)MAXIMUM REVERSE LEAKAGE AT V WM I D (µA)MAXIMUM PEAK PULSE CURRENT I PPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT I PPMV C (V)MAXIMUM TEMPERATURE COEFFICIENT OF V BR (%/°C)MIN.MAX.Note:(1) Automotive grade AEC Q101 qualifiedRATINGS AND CHARACTERISTICS CURVES (T A = 25 °C unless otherwise noted)ORDERING INFORMATION (Example)PREFERRED P/N UNIT WEIGHT (g)PREFERRED PACKAGE CODEBASE QUANTITYDELIVERY MODE5KP5.0A-E3/54 2.7765480013" diameter paper tape and reel 5KP5.0AHE3/54 (1) 2.7765480013" diameter paper tape and reelFigure 1. Peak Pulse Power Rating Curve Figure2. Pulse Power or Current vs. Initial Junction TemperatureFigure 3. Pulse WaveformFigure 4. Typical Junction CapacitancePACKAGE OUTLINE DIMENSIONS in inches (millimeters)APPLICATION NOTEThe 5KP series of high power transient voltage suppressors were designed to be used on the output of switching power supplies. These devices may be used to replace crowbar circuits. Both the 5 % and 10 % voltage tolerances are referenced to the power supply output voltage level.They are able to withstand high levels of peak current while allowing a circuit breaker to trip or a fuse blow before shorting. This will enable the user to reset the breaker or replace the fuse and continue operation.For this type operation, it is recommended that a sufficient mounting surface be used for dissipating the heat generated by the Transient Voltage Suppressor during the transient or over-voltage condition.Figure 5. Power Derating CurveFigure 6. Maximum Non-repetitive Forward Surge CurrentDisclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.。