NE677M04-T2-A中文资料

合集下载

云浮检验检疫局视频会议系统设备清单

电池箱
C—20节
电池箱尺寸：450×950×1230（W×D×H）mm总重量：约100kg/2个
台
2
4
电池连接电缆
套
1
5
监控软件
winpower2003管理监控软件
套
1
二、视频会议系统
6
会议主机
DCN-CCUB
BOSCH
台
1
7
会议代表单元
DCN-CONFF
BOSCH
台
5
4个代表位
8
会议主席单元
DCN-CONCM
BOSCH
台
1
1个主席位
9
连接电缆
LBB 4116/25
BOSCH
卷
2
10
显示单元
飞利浦47PFL7422
台
1
液晶电视屏幕尺寸:47英寸屏幕比例:16:9幕亮度:500cd/m2
11
大屏幕管理软件
定做
Abebe
块
1
12
DVI线缆
国产
国产
套
1
13
主音音箱
JBL confrloc 28
JBL/美国
只
2
额定功率50S
BEHRINGER
台
1
带功放、均衡功能
15
手持无线麦
SHURE 24/58
美国SHURE
套
2
16
32U
标准专业机箱
金盾
套
1
17
其他辅助材料设备
吊架、电缆线、咪线
国产
批
1
三、网络设备需求清单
18
防火墙
NGFWARES-VPN(S)

AZM 161SK-12 12RKA-024 产品说明书

DataOrdering dataProduct type descriptionAZM 161SK-12/12RKA-024Article number (order number)101166285EAN (European Article Number)4030661213972eCl@ss number, Version 9.027-27-26-03CertificationsCertificates CEcULusCCC EACGeneral dataProduct nameAZM 161Standards EN 60947-5-1BG-GS-ET-19LowActive principleelectromechanical Enclosure materialPlastic, glass-fibre reinforced thermoplastic, self-extinguishing Material of the contacts, electricalSilver Gross weight 460 g General data - FeaturesPower to lock Yes AZM161SK-12/12RKA-M16-24VLong life6 ContactsManual releaseDouble-insulated130 mm x 90 mm x 30 mmThermoplastic enclosureLarge wiring compartment cable entries 4 M 16 x 1.5Interlock with protection against incorrect locking.Manual release YesNumber of actuating directions3Number of auxiliary contacts2Number of safety contacts4Safety appraisalStandards ISO 13849-1Mission Time20 Year(s)Safety appraisal - Safety outputsB10d Normally-closed contact (NC)2,000,000 Operations B10d Normally open contact (NO)1,000,000 OperationsMechanical dataMechanical life, minimum1,000,000 Operations Actuating play in direction of actuation 5.5 mmClamping force in accordance with ISO14119F zh2,000 NLatching force30 Npositive break travel10 mmPositive break force, minimum20 NActuating speed, maximum 2 m/sMechanical data - Connection techniqueTerminal Connector Screw terminals Cable section, minimum 1 x 0.25 mm²Cable section, maximum 1 x 1.5 mm²Note (Cable section)All indications about the cable section are including the conductor ferrules.Mechanical data - DimensionsHeight of sensor90 mmLength of sensor30 mmWidth of sensor130 mmAmbient conditionsProtection class IP 67 to IEC/EN 60529 Ambient temperature, minimum-25 °CAmbient temperature, maximum+60 °CAmbient conditions - Insulation valueRated impulse withstand voltage 4 kVElectrical dataThermal test current 6 A24 VAC/DCRequired rated short-circuit current to EN60947-5-11,000 AElectrical power consumption, maximum10 WSwitching element NO contact, NC contact Switching principle Creep circuit element Switching frequency1,000 /hOther dataNote (applications)sliding safety guard removable guard hinged safety guardScope of deliveryIncluded in delivery Actuators must be ordered separately. NotesNote (Manual release)For maintenance, installation, etc.For manual release using M5 triangular key, available as accessoryOrdering codeProduct type description:AZM 161 (1)-(2)(3)K(4)-(5)-(6)(7)(1)SK Screw connectionCC Cage clampsST Connector M12, 8 and 4 pole (only for Us: 24 VAC/DC)(2)12/12 2 NO contacts/4 NC contacts12/11 2 NO contacts / 3 NC contacts (conector version)11/12 2 NO contacts / 3 NC contacts (conector version)(3)without Latching force 5 NR Latching force 30 N(4)without Power to unlockA Power to lock(5)without Lateral manual releaseED Manual release on the cover sideEU Manual release on the rear sideT Lateral emergency exitTD Emergency exit on the cover sideTU Emergency exit on the rear sideN Emergency release(6)024Us: 24 VAC/DC110/230Us: 110/230 VAC(7)G with LED (only for Us: 24 VAC/DC)PicturesProduct picture (catalogue individual photo)ID: kazm1f03| 36,6 kB | .png | 74.083 x 55.739 mm - 210 x 158Pixel - 72 dpi| 60,1 kB | .jpg | 22.831 x 17.195 mm - 320 x 241 Pixel- 356 dpi| 698,5 kB | .jpg | 352.778 x 265.289 mm - 1000 x 752Pixel - 72 dpiDimensional drawing basic componentID: kazm1g09| 4,5 kB | .png | 74.083 x 62.442 mm - 210 x 177 Pixel- 72 dpi| 139,6 kB | .jpg | 352.778 x 298.097 mm - 1000 x 845Pixel - 72 dpi| 34,7 kB | .jpg | 112.889 x 95.25 mm - 320 x 270 Pixel- 72 dpi| 137,3 kB | .cdr |Switch travel diagramID: kazm1s07| 28,7 kB | .jpg | 112.889 x 97.367 mm - 320 x 276Pixel - 72 dpi| 17,7 kB | .cdr || 2,9 kB | .png | 74.083 x 63.853 mm - 210 x 181 Pixel- 72 dpiDiagramID: kazm1k30| 30,5 kB | .jpg | 112.889 x 72.672 mm - 320 x 206Pixel - 72 dpiOperating principleID: kazm1a41| 48,4 kB | .cdr |K.A. Schmersal GmbH & Co. KG, Möddinghofe 3, D-42279 WuppertalThe details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.Generated on 08.07.2020 18:52:51。

监护招标参数(进口)

监护招标参数（进口）一、原装进口多参数监护仪1.1 原装进口、模块化、插件式监护仪。

1.2 要求具备; 中文操作系统。

1.3 适用范围：成人、儿童、新生儿。

1.4屏幕≥12寸彩色，医用级触摸液晶显示器，具备高分辨率1.5 一键操作模式：触屏、旋钮及背光快捷键。

1.6 采用金属外壳、无风扇及低功耗设计。

1.7 内置模块插槽，所有监测参数模块可直接插入，且支持热插拔操作。

1.8内置锂电池，续航时间≥ 2小时。

1.9 递进式报警管理系统。

1.10四级文字和三级声、光报警，多种报警限设置方式，提供≥9分钟报警趋势显示，报警可自动触发记录。

1.11 具有高清分屏显示功能，并具有文字、光报警提示。

1.12 具有屏幕快照功能，可最多存储≥380张长达14秒波形数据。

1.13标配监测心电、心率、血氧饱和度、无创血压、呼吸、脉率、双体温、双有创二、监测功能：2.1心电监测：（要求提供技术说明）2.2 心电导联：支持3 / 5 / 6 / 10导联心电监测，支持6 / 10根导联线同步采集12导联心电波形。

2.3 支持同屏显示同步12导联心电图，并可自动生成12导心电报告。

2.4 要求具备自动实时的12导联ST段分析，按解剖部位分区显示ST段复合波和数值及其变化趋势图，可动态观察ST段变化趋势及心肌缺血定位。

2.5 ST段测量功能可用于新生儿、儿童及成人。

2.6 要求具备同步多导联心律失常分析，可同时对≥3道ECG心电导联进行分析。

2.7 可对房颤进行自动识别、分析及报警。

2.8 具有急性心肌缺血预测评分系统。

2.9 起搏器监测功能：单腔或双腔。

2.10 可支持通过6根导联线对重建12导联ECG波形进行QT/QTc 监测。

2.11 可支持通过监护仪直接察看并打印存储在监护仪中或存储在心电管理系统，数据库中的患者12导联ECG报告。

2.12 无创血压监测：要求采用双管路双脉冲步进式放气振荡法。

2.13 呼吸监测：可识别胸式呼吸和腹式呼吸。

E3643A中文资料(Agilent(Hewlett-Packard))中文数据手册「EasyDatasheet - 矽搜」

防护
一年E364xA系列电源
三个月标准运附件
产品监管
设计符合UL3111-1;认证,CSA 22.2 1010.1号; 符合IEC 1010-1;符合EMC指令89/336/EEC（第1组,A类）
订购信息
安捷伦E364xA系列电源 E3640A 30瓦单电源 E3641A 30瓦单电源 E3642A 50瓦单电源 E3643A 50瓦单电源 E3644A 80瓦单电源 E3645A 80瓦单电源 E3646A 60瓦双电源 E3647A 60瓦双电源 E3648A 100瓦双电源 E3649A 100瓦双电源
E3640A
E3641A
E3642A
E3643A
E3644A
E3645A
30 W
50 W
80 W
1
0至8 V / 3 A或 0 to 20 V/1.5 A
5.3千克
1
0〜35 V / 0.8 A或 0 to 60 V/0.5 A
5.2千克
1
0至8 V / 5 A或 0 to 20 V/2.5 A
6.3千克
*与1CM或锁定链接机架安装/ FL法兰套件需要
安捷伦或客户支持轨
安捷伦支持RailsE3663AC
5
（标准命令可编程仪器）允许快速和简单编程程
序. 此外,用户手册,为所有最终用户编程足够信息,从初学者到退伍军人 .
广泛支持
VXI 即插即用软件驱动程序适用于VEE,国家仪器公司LabVIEW and LabWin dows .有这些驱动程序, 整合E364xA到您系统不能有任何容易.该
驱动程序在微软支持
准确度编程电压
12个月
（@ 25ºC±5°C）,±（％输出+偏移）

Agilent E4406A 矢量信号分析仪商品说明书

1981Agilent E4406AVector Signal AnalyzerAccuracyS p e e d2Fast and accurate measurements To stay competitive, wireless equipment manufacturers need flexible test equipment capable of testing different formats with little change in set-up. The Agilent E4406A vector signal analyzer (VSA) is the perfect fit, offering the best combination of speed and accuracy for making one-button,standards-based measurements.2.5G and 3G formatsFor engineers developing next-generation wireless components and systems, the E4406A provides W-CDMA, cdma2000,1xEV-DO and EDGE/GSM formats. Using one-button measurements, engineers can quickly verify conformance to these new formats. As the standards have evolved, we have continued to enhance existing measurement personalities, and add new ones. The modular architecture of the E4406A makes it simple for you to upgrade and be ready for the latest standards.You develop the wireless future…Easy to useMulti-format3…we provide the signal analysis.An investment for your future The number of wireless technologies deployed around the world is growing and the demand for any particular format can change quickly. The E4406A offers format and frequency flexibility.Comprehensive signal analysis Speeding up production means being ready to manufacture anything and lose no time doing it. The E4406A easily adapts to virtually any popular format:•W-CDMA •cdma2000•1xEV-DO •cdmaOne •EDGE •GSM •NADC •PDC •iDEN •Spectrum •Waveform“We have decreased the (transmitter power calibration)test time by 25%.”–T est Systems Designer4Built for speed…Fast standards-based measurements As a wireless system or componentmanufacturer, you are under pressure to increase throughput while minimizing capital investments. Long test times can severely limit your manufacturing throughput, so we designed the E4406A.Since its introduction, progressive enhancements to the E4406A ensure its performance keeps pace with the ever-increasing need for speed.Today's E4406A is faster than ever. For example, the W-CDMA adjacent channel power ratio (ACPR) measurement is now nearly eight times faster than it used to be.Output radio frequency spectrum (ORFS) is two times faster, W-CDMA code domain power (CDP) is five times faster, and other measurements have improved as well.The E4406A transmitter power calibration uses time record data and built-in algorithms to provide complete transmitter level calibration with incredible speed – with all the accuracy you expect from the affordably-priced E4406A.In addition to high-speed throughput and accuracy in the manufacturing environment,the E4406A is designed to allow research and development engineers to quickly obtain results with minimal keystrokes.The E4406A delivers a logical user interface and a wealth of quick “one button” measurments, enabling designers to quickly try multiple test without getting bogged down in crypitic menus. The E4406A interface provides the edge needed to expediently evaluate new designs and successfully meet the demands of today's competitive environment.Base station transceiver suite of testsTypical spectrum analyzerNow even faster…without giving up accuracy.Fast spectrum measurementsThe E4406A features pre-configured, one-button measurements for many cellular standards and can also be used for narrowband spectrum measurements. Manufacturers can expect to make inter-modulation distortion and other amplitude measurements up to three times faster using the E4406A. AccuracyYou don’t need to reduce measurementspeed to get accurate results. Superiorabsolute level accuracy of ±0.6 dB(±0.4 dB typical) provides unmatchedperformance and minimizes test uncertainty.Combined with a linearity of ±0.25 dBover a 76 dB range, the E4406A is astate-of-the-art measurement tool.Absolute level accuracyNarrow span spectrum measurement over GPIB E4406A VSA spectrum analyzer25 updates/second Typicalspectrumanalyzer56The E4406A VSA…Focused applications including EDGE, GSM,W-CDMA, cdma2000, 1xEV-DO, cdmaOne,and NADC as well as narrow-span spectrum and waveform analysisBaseband measurements with balanced/unbalanced multiple impedance inputsLarge,high-resolution, color display makes viewing multiple traces easyZoomfeature allows users to display selected measurement windowsAutomatic alignment ensures accurate measurement resultsOne-button,standards-based measurements7…comprehensive signal analysis.High-speed LAN, parallel, and GPIB ports provide speed and flexibility whenIntuitive key strokesBuilt-in floppy disk drive provides PC compatibility and data archivingManufacturing8Standards complianceIn manufacturing, you need straightforward pass/fail verification of critical specifications.With built-in test limits you don ’t have to keep track of every standard. The E4406A performs tests to the requirements of current industry standards with free, easy-to-install, firmware updates.Speed and throughputIn the world of high-speed manufacturing every millisecond counts. Identify your throughput restrictions and if measurement speed is creating a bottleneck, consider the significant speed advantage of the E4406A.Transmitter and receiver testingIn combination with the Agilent E4438C ESG vector signal generator, the E4406A offers base station receiver and transmitter testing for major 2G, 2.5G, and 3G wireless formats.The E4406A combined with an E4438C is a test solution that provides the required flexibility, without compromising accuracy, for maximum throughput in base station production with the ability to migrate to new formats.Designed for manufacturing…Development9Verify next-generation designs For R&D engineers developing next-generation wireless components and systems, the E4406A is a low-cost tool that quickly verifies conformance. Your investment is secure because the E4406A has a modular architecture – making it easy to upgrade to the latest standards.Characterize using leading test methodsDigital modulation presents new challenges to amplifier manufacturers.Designers need effective methods to quickly characterize digital signals. The E4406A ’s complementary cumulative-distribution function (CCDF) is useful for determining a signal ’s power statistics,revealing the power peaks relative to the average power for assessing linearity requirements.Flexible power measurements Multicarrier power amplifier (MCPA)designers are faced with new measurement challenges. Designers must characterize intermodulation distortion at many frequency offsets and evaluate the effects of different modulation formats over a wide dynamic range. The E4406A features a fully-configurable ACP measurement that can test up to five frequency offsets and be optimized for dynamic range or speed.…and product development.10GSM with EDGE (Option 202)The EDGE measurement personality performs the latest standards-based measurements, including:•Error vector magnitude (EVM)•Multi-slot power versus time (PvT)•ORFS •IQ offset•Channel plans for 400, 800, 900, 1800, 1900 MHz•GSM measurements from Option BAH The EVM measurement features a unique algorithm to simultaneously display the EVM numerical results and the EDGE constellation diagram using the industry-specified measurement filter.GSM (Option BAH)The GSM measurement personality lets you quickly perform measurements to the latest ETSI standards:•Mean transmitter carrier power •Multi-slot PvT •ORFS•Phase and frequency error (PFER)•IQ offset•Transmitter band spurious•Channel plans for 400, 700, 800, 900, 1800, 1900 MHzThe personality features easy channel and timeslot selections, configurable PvT masks,and a typical ORFS dynamic range of 90 dB.NADC and PDC (Option BAE)Both the North American Digital Cellular (NADC) and Personal Digital Cellular (PDC)measurement personalities are included in this option. The NADC measurements are structured according to the IS-136 TDMA standard. Measurements included in this option are:•ACP •EVM•Occupied bandwidth (for PDC)The personalities feature base station and mobile radio mode set-ups, as well as sync word search capability.iDEN (Option HN1)The iDEN measurement personality performs measurements to the Motorola iDEN specialized mobile radio format. •Occupied bandwidth (OBW)•ACPR•Transmitter bit error rate (BER)TDMA measurement personalities…11W-CDMA (Option BAF)The complexity of W-CDMA demands the flexibility and depth of demodulation capability provided by this personality.Perform the following measurements on the HPSK uplink or downlink QPSK signals:•Code domain •QPSK EVM•Modulation accuracy (composite rho and EVM)•Channel power•Adjacent channel power leakage ratio (ACLR)•Power control •PvT•Intermodulation distortion •Multicarrier power•Spectrum emission mask •OBW •CCDFThis personality has the ability toautomatically determine active channels,to synchronize with any W-CDMA channel,to display code domain power in a multi-rate view, and to demodulate down to the symbol level. Variable capture intervals and pre-defined test models enable the user to perform fast, accurate measurements for manufacturing or in-depth analysis for R&D.cdma2000 (Option B78)The cdma2000 measurement personality offers the logical upgrade path from IS-95 to IS-2000 testing. Measurements support the forward and reverse links.•Code domain •QPSK EVM•Modulation accuracy (composite rho and EVM)•Channel power •ACPR•Intermodulation distortion •Spectrum emission mask •OBW •CCDFAdvanced code domain analysis algorithms display Walch codes for either Hadamard or OVSF coding schemes in a multi-rate view. Other capability includes code domain power error, symbol EVM,symbol power versus time, active channel identification, variable PN offset, quasi-orthogonal functions and demodulated symbol bit displays after de-spreading.… and CDMA measurement personalities.12Expanding measurement potential…cdmaOne (Option BAC)Built on Agilent ’s pioneering efforts in CDMA measurement techniques,this personality provides quick and easy measurement set-ups for the TIA/EIA-95, J-STD-008,IS-97D, and IS-98D band classes:•Modulation accuracy (rho)•Code domain •Channel power •ACPR•Close-in spuriousAlong with the world ’s fastest ACPR measurements, this personality features PN (pseudo-noise sequence) search, time offset, and carrier feed-through analysis.1xEV-DO (Option 204)With digital demodulation analysis, the 1xEV-DO measurement personality provides the most comprehensive, easy-to-use,1xEV-DO measurement solution available in an analyzer. This personality, which performs measurements for both forward link and reverse link signals, provides key transmitter measurements for analyzing systems based on the 3GPP2 and TIA/EIA/IS-856 standards.Forward link•Channel power•Power versus time mask •Spurious emissions and ACP •Intermodulation distortion •OBW•Code domain•Modulation accuracy (composite rho)•QPSK EVM•Power statistics (CCDF)Reverse link •Code domain•Modulation accuracy (composite rho)For forward link, the PvT mask and spurious emissions/ACP measurements support both the idle slot (burst signal) and active slot (full power signal). With the auto-burst search function, you can see the standard-based time mask for the 1xEV-DO idle slot in PvT. Code domain, modulation accuracy (composite rho), and QPSK EVM can also measure for each channel ’s Pilot, MAC, and Data in QPSK/8PSK/16QAM. Designed with flexibility in mind, this personality supports the unique 1xEV-DO forward link signals ’feature of time divisions multiplex (TDM). For reverse link, code domain, and modulation accuracy provide powerful modulation analysis functions for transmitter tests.13IQ inputs (Option B7C)Capitalize on the E4406A ’s demodulation capabilities by extending the measurement range to baseband. The baseband IQ input option enables engineers to measure the complete signal path of a receiver or transmitter and directly compare signals both before and after frequency conversion and IQ (de)modulation.Ideally suited for R&D engineers and manufacturing environments, this option allows measurement of baseband I and Q signals in either balanced or unbalanced systems. Input configurations include 50-ohm unbalanced, 600-ohm balanced, and 1-Mohm balanced or unbalanced –enabling a variety of systems to be directly tested without cumbersome and error-inducing conversion networks.Applicable in-band 3GPP W-CDMA,cdma2000, EDGE/GSM, and Basic mode measurements are supported via RF and IQ inputs, enabling engineers to track down signal degradation both before and after RF/IF conversion.Additional features include auto calibration of input signals, variable dc offsets and a dc to 5-MHz input frequency range (10 MHz in I + jQ mode)....tailored to user requirements.14E4406A VSA/89601Asoftware combinationThe standards-based, one-button test capabilities of the E4406A can be expanded with the flexible digital demodulation and analysis capabilities of the Agilent 89601A PC software. This teaming provides fast and accurate data acquisition with powerful,flexible modulation analysis tools for, both common and evolving communications standards.The 89601A vector signal analysis software is the heart of the Agilent 89600 series of vector signal analyzers. This software provides flexible tools for demodulating and analyzing even the most advanced digital modulations, whether or not they are contained in an established standard. Features include variable block size signal acquisition with user-selectable pulse search and synch words, and a user-con-trollable adaptive equalizer. Filter types include cosine (raised and square-root raised), Gaussian, and low-pass – all with configurable alpha/BT. Supported modula-tion formats for both continuous and burst carriers include FSK (2, 4, 8, and 16 level),BPSK, QPSK, OQPSK, DQPSK, p/4DQPSK,8PSK, QAM (16 to 256 level), VSB (8 and 16 level), EDGE, and MSK.The software also provides signal capture and analysis features, such as the capability to download signal capture files for playback through signal generators,and display high-speed spectrograms.The 89601A software runs on a PC connected to the E4406A, via LAN or GPIB,and provides hardware control and results displays along with modulation analysis.Coupling speed and power…15/find/vsa…with Agilent’s tradition of excellence.Service and supportThe speed and accuracy of the E4406A VSA is only a small part of what you get from Agilent. We strive to provide complete solutions that go beyond our customers ’expectations. Only Agilent offers the depth and breadth of enhancements, software, services, connectivity, accessibility, and support to help you reach your measurement objectives. For more information on the E4406A VSA, including product and application literature, visit our Web site at /find/vsaPre-sales service• rentals, leasing, and financing • application engineering services Post-sales service• standard 3-year global warranty • Worldwide Call Center and Service Center support network • one-year calibration intervals • firmware upgrades downloadable from the Web PC connectivity • 10 baseT LAN port • floppy disk drive • GPIB interface• VXI Plug and Play driversPeripheral and product interfaces • parallel printer port • printer support • VGA monitor output• Agilent E4438C ESG vector signal generator•Agilent 89601A vector signal analysis softwareTraining and access to information • on-site user training • factory service training• Web-based support of frequently asked questions• manuals on CD-ROM and on the Web Software• programming examples on CD-ROM • SCPI (Standard Commands for Programmable Instruments)• PC-based performance verification and adjustment softwareOrdering Array informationE4406A vector signal analyzerModel DescriptionE4406A7 MHz to 4 GHzOption DescriptionDigital Demodulation MeasurementsE4406A-202EDGE with GSM measurementpersonalityE4406A-2041xEV-DO measurementpersonalityE4406A-B78cdma2000 measurementpersonalityE4406A-BAC cdmaOne measurementpersonalityE4406A-BAE NADC, PDC measurementpersonalityE4406A-BAF W-CDMA measurementpersonalityE4406A-BAH GSM measurement personality E4406A-HN1IDEN measurementpersonalityInputs and outputsE4406A-300321.4 MHz IF outputBBIQE4406A-B7C I/Q inputsCalibration documentationE4406A-UK6Commercial calibrationcertificate with test data AccessoriesE4406A-1CM Rack mount kitE4406A-1CN Handle kitE4406A-1CP Rack mount and handle kitE4406A-1CR Rack slide kit* Includes English manual set.。

安捷伦7000系列示波器中文技术资料

23···分段存储器DSO/MSO 离线分析电源管理硬件加速的串行解码I 2C 、SPI CAN/LIN ··矢量信号分析内核辅助FPGA 调试安全环境RS-232/UARTFlexRay ·····4您的设计中有模拟、数字和串行信号…示波器是否也应该能够处理这些信号呢？MegaZoom III 技术。

MegaZoom III 深存储器可捕获长时间内不重复的信号，并保持高采样率，可快速放大您关注的区域。

采样率和存储器深度联系紧密。

示波器的深存储器可在长时间内保持高采样率。

快速发现偶发错误。

硬件加速解码增加了捕获到疑难事件的概率。

在间歇性故障遭到客户抱怨或关系到产品质量之前，安捷伦示波器可帮助您捕获到这些问题。

混合信号触发器。

可同时触发任意组合的模拟和数字信号。

一台仪器中包含精确的模拟测量和准确的数字内容，且它们之间有时间关联。

数字通道的应用。

使用Altera 或XilinxFPGA 进行设计？使用FPGA 动态探头进行快速的内部FPGA 测量。

使用I2C 、SPI 或RS-232？使用4通道型号的模拟或数字信号来采集和解码这些串行总线。

InfiniiVision 7000系列示波器通道可更快地确定疑难问题。

创新的高分辨率显示。

InfiniiVision 7000系列示波器具有XGA显示和256级的亮度，可精确表述您正在测试的信号的模拟特征。

配备有业内最快速的更新速率，可达100000波形/秒，您可捕获关键的信号细节，察看偶发事件，而这些在传统的示波器上可能被漏掉。

模拟信号：高达1 GHz 带宽和4 GSa/s采样率数字信号：具有混合信号触发的16位定时通道捕获模拟或数字的混合信号。

比较数字信号的多个周期和较慢的模拟信号。

具有高达2 GSa/s 深存储器的16位高速定时通道。

使用定时通道来评测控制信号关系。

易安电子产品说明书

Eaton 189884Eaton Moeller® series PKZM01 Motor-protective circuit-breaker, 660 V 690 V: 0.55 kW, Ir= 0.63 - 1 A, IP20General specificationsEaton Moeller® series PKZM01 Motor-protective circuit-breaker189884PKZM01-1-EA401508187880293 mm 90 mm 45 mm 0.261 kgCE Marked RoHS conformProduct NameCatalog Number Model Code EANProduct Length/Depth Product Height Product Width Product Weight Compliances0.25 kW0.63 AThermomagnetic15.5 A0.12 kWBuilt-in device fixed built-in technique Phase failure sensitiveScrew connectionThree-pole690 V50 kA1 A5.33 W15.5 A1 A690 VPush button Motor Starters in System xStart - brochureSave time and space thanks to the new link module PKZM0-XDM32MESwitching and protecting motors - catalogProduct Range Catalog Switching and protecting motorseaton-manual-motor-starters-characteristic-characteristic-curve-008.eps eaton-manual-motor-starters-characteristic-characteristic-curve-009.eps eaton-manual-motor-starters-characteristic-characteristic-curve-005.epsDA-DC-00004883.pdfeaton-manual-motor-starters-circuit-breaker-pkzm01-dimensions.eps eaton-manual-motor-starters-circuit-breaker-pkzm01-3d-drawing-002.epseaton-general-ie-ready-dilm-contactor-standards.epseaton-manual-motor-starters-mounting-3d-drawing-002.epsDA-CE-ETN.PKZM01-1-EAIL034045ZUWIN-WIN with push-in technologyDA-CD-pkzm01DA-CS-pkzm01Rated operational power at AC-3, 380/400 V, 50 Hz Overload release current setting - minSwitch off techniqueAdjustment range undelayed short-circuit release - min Rated operational power at AC-3, 220/230 V, 50 Hz Device constructionFunctionsElectrical connection type of main circuitNumber of polesRated operational voltage (Ue) - minRated short-circuit breaking capacity Icu at 400 V AC Rated uninterrupted current (Iu)Power lossAdjustment range undelayed short-circuit release - max Overload release current setting - maxRated operational voltage (Ue) - maxActuator typeDegree of protection BrochuresCatalogsCharacteristic curveDeclarations of conformity DrawingseCAD modelInstallation instructions Installation videosmCAD modelEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaIP20。

Herter 2012-2014 仪器设备目录说明书

Detalle de planta y de sus departamentos realizado con SIRIUS STORAGE
MPIII-7150 MPIII-7300
MPIII-3000
MPIII-7500T1 MPIII-3080
MPIII-6700
MPRF-PR
MPRF-RH
MPRF-RPTR
LCA501
LCA301
ip 67
DHD2303.0
ip 67
DAP472S2 DAP472S4
DAP471S5
DAP471S3DAP471S2
DAP471S1
CAPTURE HOOD PANDA
GEOS11
990
8908AZ
TUBOS PITOT
XGRID
PVM610
DHD2114.0
DHD2114.2 ip 67
S T E D
283 / 284
270
282E 406 / 407
404
410 / 413250262
472490
288E
30.1039417
451
14.4006 - 710
1096 / 1116487
14.4000 - 409
1090 / 11101032 / 1062
La referencia
ip 67
ip 65
31.1020 - 5726
5987
5989
5989M / 5989M-300
5981
O
N F O R M ip 64
RAYDUAL RAYFLASH
RAYFLASH III
RAY8875HACCP

华硕主板

数字家庭主板M2NDH-支持AMD®SocketAM2Athlon64FX/Athlo64X2/Athlon64/Sempron -AMDLive!™Ready-强大扩充能力：1xPCI-Ex16、2xPCI-E、3xPCI-华硕WiFi-APSolo-华硕DHRemote™-华硕MP3-In™-华硕Q-Connector-高保真音频中央处理器支持AMD®SocketAM2Athlon64FX/Athlo64X2/Athlon64/Sempron 支持AMDCool'n'Quiet™技术AMD64架构，同时兼容32位和64位计算AMDLive!™Ready芯片组NVIDIAnForce®430MCP前端总线2000/1600MT/s内存双通道内存架构4x240-pinDIMM内存插槽，支持最大容量高达8GB的DDR2800/667/533ECC和non-ECC、un-buffered内存扩充插槽1xPCI-Expressx16插槽2xPCI-Expressx1插槽3xPCI2.2插槽存储装置/RAID-1xUltraDMA133/100/66/33-4xSerialATA3.0Gb/s-NVIDIAMediaShield™RAID通过SerialA TA设备支持RAID0、1、0+1、5和JBOD网络功能NVIDIAnForce®430内建GigabitMAC，支持externalAttansicPHY无线局域网：54MbpsIEEE802.11b/g（华硕WiFi-APSolo）音频功能ADI6声道高保真音频CODEC背板S/PDIF数字音频输出USB高达8个USB2.0/1.1接口M2N-VMDH-AMDSocketAM2-NVIDIAGeForce6100/nForce430-双通道DDR2800/667/533-1xPCIExpressx16+1xPCIExpressx1+2xPCI-双VGA：DVI-D和D-Sub-8声道高保真音频-2x1394a接口中央处理器支持AMD®SocketAM2Athlon64X2/Athlon64FX/Athlon64/Sempro nAMDCool'n'Quiet™技术AMD64架构，兼容32位和64位计算AMDLive!™Ready芯片组NVIDIAGeForce6100/nForce430前端总线2000/1600MT/s 内存双通道内存架构4x240-pinDIMM插槽，支持最大容量为8GB的DDR2800/667/533non-ECC，un-buffered内存显卡集成GeForce6100GPU高清晰视频处理，最高分辨率可达1920x1440（@75Hz）支持RGB显示；UXGA1600x1200（@60Hz）支持DVI-D显示支持双VGA输出：DVI-D和RGB注意：DVI-D不能用来输出RGB信号至CRT。

思默康产品选型说明书

温度湿度气体2015价格表德国标准东方精神壓力照度及位移思默康自动化设备(上海)有限公司价格生效期始于2014年10月15日1.0版TRW1-Series (T)TRW2-Series (T)0…10V / 4…20mANTC / PT / NiTPS1-Series (T)0…10V / 4…20mANTC / PT / NiTOW1-Series (T)TOW2-Series (T)TDE1-Series (T_av)TDE2-Series (T_av)风管温度防凍开关TDE2-Series (T_fp)通用温度有源传感器TUU1-Series (T)0…10V / 4…20mA通用温度无源传感器TUU2-Series (T)HPS2-Series (H_cs) HPS2-Series (H_lg)GDI1-Series (VOC)0…10V湿度:0..10V温度:0..10V可选 NTC ; PT ; NiPDE1- Series (dP_r) PDI1- Series (V&T) PDE2- Series (dP) PPE1- Series ( PPE2- Series (LRC1-Series(L)10V / 4…20mA CRC8-series (L&M)照度:0...10V人体活动:ON/OFF MRW2-Series(M)asia pacific照度及位移传感器温度湿度气体壓力照度及位移价格生效期始于2014年10月15日价格表其他配件德国标准东方精神asia pacific配件asia pacific安装套件思默康自動化設備(上海)有限公司上海市閔行區莘庄工業區春東路479號C-1廠房2樓電話: (+8621) 5176 0211傳真: (+8621) 5176 0213泰慕康传感器科技有限公司香港新界荃灣168德士古道德豐工業中心2座13/樓10-11室電話: (+852) 3468 8636傳真: (+852) 3621 0002网站: / 邮箱: info@ asia pacific声明该价格表中,对技术信息都进行了简化,并保持随时更新。

安全性能综合测试仪使用手册

安全性能综合测试仪（42系列）使用手册检定规程：JJG984—2004 国家接地电阻测试仪计量检定规程JJG795—2004 国家耐电压测试仪计量检定规程JJG1005-2005 国家电子式绝缘电阻表计量检定规程JJG 843-2007《泄漏电流测试仪计量检定规程》执行标准：Q/0205OSD001—2009 96系列安全性能测试仪企业标准目录第一章安全规则 (1)1.1一般规定 (1)1.2维护和保养 (1)1.2.1使用者的维护 (1)1.2.2定期维护 (2)1.2.3使用者的修改 (2)1.3测试工作站 (2)1.3.1位置选择 (2)1.3.2输入电源 (3)1.3.3工作场所 (3)1.4操作人员规定 (3)1.4.1人员资格 (3)1.4.2安全守则 (3)1.4.3衣着规定 (3)1.4.4医学规定 (3)1.5测试安全程序规定 (4)1.6安全要点 (4)第二章概述 (4)2.1产品简介 (5)2.2产品特点 (5)2．2．1 测试迅速 (5)2．2．2 输出方式先进 (5)2．2．3 运行可靠 (5)2．2．4 操作简单 (6)2．2．5 联机方便 (6)2.3前面板说明 (6)2.4后面板简介 (7)2.4.1柜式综合测试仪后面板 (7)2.4.2台式综合测试仪后面板 (8)2.5 隔离电源输入板（只适用于柜式综测）： (9)第三章安装要点 (9)3.1拆封和检查 (10)3.2使用前的准备 (10)3.2.1工作电压的要求和选择 (10)3.2.2输入电压的要求和选择 (10)3.3储存和运输 (10)3.3.1周围环境 (10)3.3.2包装方式 (11)第四章技术指标 (11)4.1整机规格 (12)4．2技术参数 (12)4．2．1接地电阻 (12)4．2．2绝缘电阻 (12)4．2．3耐压测试 (13)4．2．4泄漏电流 (13)4．2．5功率测试 (13)4．2．6启动测试 (14)第五章综合测试仪使用方法 (15)5.1外部接线 (16)5.2测试仪开机 (17)5.3自检 (17)5.4主菜单界面 (18)5.5功能设置 (18)5.5.1设置密码： (19)5.5.2单步测试： (19)5.5.3模拟阻抗（需定制）： (19)5.5.4 波特率 (19)5.5.5系统设置保存 (20)5.6密码输入 (20)5.7选择测试组 (20)5.8设置测试项 (21)5.8.1测试方式选择 (22)5.8.2测试频率选择 (22)5.8.3保存设置 (22)5.8.4不保存退出设置 (22)5.9接地测试 (22)5.9.1设置接地测试项 (22)5.9.2开始接地测试 (23)5.10绝缘测试 (24)5.10.1设置绝缘测试项 (24)5.10.2开始绝缘测试 (25)5.11耐压测试 (25)5.11.1设置耐压测试项 (25)5.11.2开始耐压测试 (26)5.12泄漏测试 (27)5.12.1设置泄漏测试项 (27)5.12.2 开始泄漏测试 (28)5.13 功率测试 (28)5.13.1 设置功率测试项 (28)5.13.2 开始功率测试 (30)5.14 启动测试 (30)5.14.1 设置启动测试项 (30)5.14.2开始启动测试 (31)5.15 测试 (32)5.16串行通信 (32)5.17 遥控接口： (34)5.18 关机 (34)第六章维护指南 (35)6.1 首次使用前检查 (35)6.2 日常维护 (35)6.3 简单故障处理 (36)6.4 注意事项 (36)附录1：综合测试仪校准方法 (37)1、引言 (37)2、检定方法 (37)2．1耐电压测试的检定 (37)2．2绝缘电阻测试的检定： (38)2．3接地电阻测试的检定： (39)2．4泄漏电流测试的检定： (40)第一章安全规则本章概要：1.一般规定2.维护和保养3.测试工作站4.操作人员规定5.测试安全程序规定6.安全要点1.1一般规定∙手册内容若有改变，恕不另行通知。

赛默飞离子6000色谱仪的参数

赛默飞离子6000色谱仪的参数一、概述赛默飞离子6000色谱仪（Mass Spectrometer 6000）是一款高性能的质谱仪，适用于各种复杂样品的分析。

该色谱仪具有多项优秀的参数和性能，在实验室分析领域得到了广泛的应用。

本文将从色谱仪的质谱分析、分辨能力、灵敏度和速度等方面，对赛默飞离子6000色谱仪的参数进行详细介绍。

二、质谱分析参数1. 质谱范围：赛默飞离子6000色谱仪的质谱范围广，能够覆盖从小分子到大分子的离子。

在常见的质谱扫描模式下，质谱范围可达100-2000 m/z。

2. 分辨率：该色谱仪具有出色的质谱分辨能力，分辨率可达到100,000以上，能够有效区分样品中的同位素峰和杂质信号。

3. 碎裂模式：赛默飞离子6000色谱仪支持多种碎裂模式，包括电子轰击解离（EI）、化学电离解离（CI）、碰撞诱导解离（CID）等，可根据实际分析需求选择适合的碎裂模式。

三、分辨能力参数1. 色谱分辨能力：赛默飞离子6000色谱仪的色谱分辨能力优秀，可将复杂样品中的不同成分准确分离并进行定量分析。

2. 基线分辨能力：色谱仪的基线分辨能力高，能够有效减少基线漂移和噪音干扰，保证分析结果的准确性和可靠性。

四、灵敏度参数1. 检测灵敏度：赛默飞离子6000色谱仪具有高灵敏度的检测能力，能够在样品中检测到微量的目标物质，极大地拓展了其适用范围。

2. 响应线性范围：色谱仪的响应线性范围宽，能够实现对不同浓度范围内的目标物质进行准确检测和定量分析。

五、速度参数1. 分析速度：赛默飞离子6000色谱仪具有较快的分析速度，能够在短时间内完成多个样品的分析，提高实验效率。

2. 数据处理速度：色谱仪配备了高性能的数据处理系统，能够实现快速数据采集、处理和分析，为用户提供及时准确的实验结果。

六、结论赛默飞离子6000色谱仪作为一款高性能的质谱仪，具有优秀的质谱分析、分辨能力、灵敏度和速度等参数。

该色谱仪在生物、药物、环境和食品等领域的分析应用中表现出色，为用户提供了强大的实验支持。

ni 6251 m系列数据采集器：16 个模拟输入、1.25 ms s、24 个数字输入输出、2

DEVICE SPECIFICATIONSNI 6251M Series Data Acquisition:16 AI, 1.25 MS/s, 24 DIO, 2 AOThe following specifications are typical at 25 °C, unless otherwise noted. For more information about the NI 6251, refer to the M Series User Manual available at / manuals.Analog InputNumber of channels8 differential or 16 single endedADC resolution16 bitsDNL No missing codes guaranteedINL Refer to the AI Absolute Accuracy section Sample rateSingle channel maximum 1.25 MS/sMultichannel maximum (aggregate) 1.00 MS/sMinimum No minimumTiming resolution50 nsTiming accuracy50 ppm of sample rateInput coupling DCInput range±0.1 V, ±0.2 V, ±0.5 V, ±1 V, ±2 V, ±5 V,±10 V±11 V of AI GNDMaximum working voltage for analoginputs (signal + common mode)CMRR (DC to 60 Hz)100 dBInput impedanceDevice onAI+ to AI GND>10 GΩ in parallel with 100 pFAI- to AI GND>10 GΩ in parallel with 100 pFDevice offAI+ to AI GND820 ΩAI- to AI GND820 ΩInput bias current±100 pACrosstalk (at 100 kHz)Adjacent channels-75 dBNon-adjacent channels-95 dBSmall signal bandwidth (-3 dB) 1.7 MHzInput FIFO size4,095 samplesScan list memory4,095 entriesData transfersPCI/PCI Express/PXI/PXI Express DMA (scatter-gather), interrupts,programmed I/OUSB USB Signal Stream, programmed I/O Overvoltage protection for all analog input and sense channelsDevice on±25 V for up to four AI pinsDevice off±15 V for up to four AI pinsInput current during overvoltage condition±20 mA maximum/AI pin Settling Time for Multichannel Measurements2| | NI 6251 Device SpecificationsTypical Performance GraphsFigure 1. Settling Error versus Time for Different Source ImpedancesTime (µs)E r r o r (p p m o f S t e p S i z e )Figure 2. AI Small Signal Bandwidth–8–7–6–5–4–3–2–1011 k10 k100 k1000 k10000 kFrequency (Hz)N o r m a l i z e d S i g n a l A m p l i t u d e (d B )NI 6251 Device Specifications | © National Instruments | 3Figure 3. AI CMRRFrequency (Hz)CMRR(dB)AI Absolute AccuracyNote Accuracies listed are valid for up to two years from the device externalcalibration.4| | NI 6251 Device SpecificationsNote Sensitivity is the smallest voltage change that can be detected. It is a functionof noise.Gain tempco13 ppm/°CReference tempco 1 ppm/°CINL error60 ppm of rangeAI Absolute Accuracy EquationAbsoluteAccuracy = Reading · (GainError) + Range · (OffsetError) + NoiseUncertainty GainError = ResidualAIGainError + GainTempco · (TempChangeFromLastInternalCal) + ReferenceTempco · (TempChangeFromLastExternalCal)OffsetError = ResidualAIOffsetError + OffsetTempco ·(TempChangeFromLastInternalCal) + INLErrorNoiseUncertainty100 points.AI Absolute Accuracy ExampleAbsolute accuracy at full scale on the analog input channels is determined using the following assumptions:•TempChangeFromLastExternalCal = 10 °C •TempChangeFromLastInternalCal = 1 °C•number_of_readings = 100•CoverageFactor = 3 σFor example, on the 10 V range, the absolute accuracy at full scale is as follows: GainError = 60 ppm + 13 ppm · 1 + 1 ppm · 10 = 83 ppmOffsetError = 20 ppm + 21 ppm · 1 + 60 ppm = 101 ppmAbsoluteAccuracy = 10 V · (GainError) + 10 V · (OffsetError) + NoiseUncertainty = 1,920 µVAnalog TriggersNumber of triggers1Source AI <0..15>, APFI 0Functions Start Trigger, Reference Trigger,Pause Trigger, Sample Clock, Convert Clock,Sample Clock TimebaseNI 6251 Device Specifications| © National Instruments| 5Source levelAI <0..15>±Full scaleAPFI 0±10 VResolution10 bits, 1 in 1,024Modes Analog edge triggering, analog edge triggeringwith hysteresis, and analog window triggering Bandwidth (-3 dB)AI <0..15> 3.4 MHzAPFI 0 3.9 MHzAccuracy±1%APFI 0 characteristicsInput impedance10 kΩCoupling DCProtection, power on±30 VProtection, power off±15 VAnalog OutputNumber of channels2DAC resolution16 bitsDNL±1 LSBMonotonicity16 bit guaranteedAccuracy Refer to the AO Absolute Accuracy section Maximum update rate1 channel 2.86 MS/s2 channels 2.00 MS/s per channelTiming accuracy50 ppm of sample rateTiming resolution50 nsOutput range±5 V, ±10 V, ±external reference on APFI 0 Output coupling DCOutput impedance0.2 ΩOutput current drive±5 mAOverdrive protection±25 VOverdrive current20 mA6| | NI 6251 Device SpecificationsPower-on state ±5 mV 1Power-on glitch 1.5 V peak for 1.5 sOutput FIFO size 8,191 samples shared among channels used Data transfersPCI/PCI Express/PXI/PXI Express DMA (scatter-gather), interrupts,programmed I/OUSBUSB Signal Stream, programmed I/O AO waveform modesNon-periodic waveform, periodic waveform regeneration mode from onboard FIFO,periodic waveform regeneration from host buffer including dynamic update Settling time, full-scale step,15 ppm (1 LSB) 2 µs Slew rate20 V/µs Glitch energy at midscale transition, ±10 V rangeMagnitude 10 mV Duration1 µsAO Absolute AccuracyAbsolute accuracy at full-scale numbers is valid immediately following internal calibrationand assumes the device is operating within 10 °C of the last external calibration.Note Accuracies listed are valid for up to two years from the device externalcalibration.Reference tempco 1 ppm/°C INL error64 ppm of range1When the USB Screw Terminal device is powered on, the analog output signal is not defined until after USB configuration is complete.NI 6251 Device Specifications | © National Instruments | 7AO Absolute Accuracy EquationAbsoluteAccuracy = OutputValue · (GainError) + Range · (OffsetError )GainError = ResidualGainError + GainTempco · (TempChangeFromLastInternalCal ) +ReferenceTempco · (TempChangeFromLastExternalCal )OffsetError = ResidualOffsetError + AOOffsetTempco ·(TempChangeFromLastInternalCal) + INLErrorExternal ReferenceAPFI 0 characteristicsInput impedance 10 kΩCouplingDC Protection, device on ±30 V Protection, device off ±15 V Range ±11 V Slew rate20 V/μsFigure 4. AO External Reference BandwidthFrequency (Hz)N o r m a l i z e d A O A m p l i t u d e A t t e n u a t i o n (d B )Digital I/O/PFIStatic CharacteristicsNumber of channels 24 total, 8 (P0.<0..7>),16 (PFI <0..7>/P1, PFI <8..15>/P2)Ground referenceD GND8 | | NI 6251 Device SpecificationsDirection control Each terminal individually programmable asinput or outputPull-down resistor50 kΩ typical, 20 kΩ minimumInput voltage protection±20 V on up to two pins2 Waveform Characteristics (Port 0 Only)Terminals used Port 0 (P0.<0..7>)Port/sample size Up to 8 bitsWaveform generation (DO) FIFO2,047 samplesWaveform acquisition (DI) FIFO2,047 samplesDI Sample Clock frequencyPCI/PCI Express/PXI/PXI Express0 MHz to 10 MHz, system and bus activitydependentUSB0 MHz to 1 MHz, system and bus activitydependentDO Sample Clock frequencyPCI/PCI Express/PXI/PXI ExpressRegenerate from FIFO0 MHz to 10 MHzStreaming from memory0 to 10 MHz, system and bus activitydependentUSBRegenerate from FIFO0 MHz to 10 MHzStreaming from memory0 MHz to 1 MHz, system and bus activitydependentData transfersPCI/PCI Express/PXI/PXI Express DMA (scatter-gather), interrupts,programmed I/OUSB USB Signal Stream, programmed I/ODI or DO Sample Clock source3Any PFI, RTSI, AI Sample or Convert Clock,AO Sample Clock, Ctr n Internal Output, andmany other signals2Stresses beyond those listed under Input voltage protection may cause permanent damage to the device.3The digital subsystem does not have its own dedicated internal timing engine. Therefore, a sample clock must be provided from another subsystem on the device or an external source.NI 6251 Device Specifications| © National Instruments| 9PFI/Port 1/Port 2 FunctionalityFunctionality Static digital input, static digital output,timing input, timing outputTiming output sources Many AI, AO, counter, DI, DO timing signals Debounce filter settings125 ns, 6.425 µs, 2.56 ms, disable; high andlow transitions; selectable per input Recommended Operating ConditionsElectrical Characteristics10| | NI 6251 Device SpecificationsDigital I/O CharacteristicsFigure 5. P0.<0..7>: I oh versus V ohV oh (V)I o h (m A )Figure 6. PFI <0..15>/P1/P2: I oh versus V oh–50–45–40–35–30–25–20–15–10–50V oh (V)I o h (m A )Figure 7. P0.<0..7>: I ol versus V olV ol (V)I o l (m A )Figure 8. PFI <0..15>/P1/P2: I ol versus V olV ol (V)I o l (m A )General-Purpose Counters/TimersNumber of counter/timers 2Resolution32 bitsCounter measurements Edge counting, pulse, semi-period, period,two-edge separationPosition measurements X1, X2, X4 quadrature encoding with Channel Z reloading; two-pulse encoding Output applicationsPulse, pulse train with dynamic updates,frequency division, equivalent time samplingInternal base clocks80 MHz, 20 MHz, 0.1 MHzExternal base clock frequency0 MHz to 20 MHzBase clock accuracy50 ppmInputs Gate, Source, HW_Arm, Aux, A, B, Z,Up_DownRouting options for inputs Any PFI, RTSI, PXI_TRIG, PXI_STAR,analog trigger, many internal signalsFIFO 2 samplesData transfersPCI/PCI Express/PXI/PXI Express Dedicated scatter-gather DMA controller foreach counter/timer; interrupts, programmed I/O USB USB Signal Stream, programmed I/OFrequency GeneratorNumber of channels1Base clocks10 MHz, 100 kHzDivisors 1 to 16Base clock accuracy50 ppmOutput can be available on any output PFI or RTSI terminal.Phase-Locked Loop (PLL)Note PCI/PCI Express/PXI/PXI Express devices only.Number of PLLs1Reference signal PXI_STAR, PXI_CLK10, RTSI <0..7> Output of PLL80 MHz Timebase; other signals derived from80 MHz Timebase including 20 MHz and100 kHz TimebasesExternal Digital TriggersSource Any PFI, RTSI, PXI_TRIG, PXI_STAR Polarity Software-selectable for most signalsAnalog input function Start Trigger, Reference Trigger,Pause Trigger, Sample Clock, Convert Clock,Sample Clock TimebaseAnalog output function Start Trigger, Pause Trigger, Sample Clock,Sample Clock TimebaseCounter/timer function Gate, Source, HW_Arm, Aux, A, B, Z,Up_DownSample ClockDigital waveform generation (DO)functionDigital waveform acquisition (DI)Sample ClockfunctionDevice-to-Device T rigger BusPCI/PCI Express RTSI <0..7>4PXI/PXI Express PXI_TRIG <0..7>, PXI_STARUSB source NoneOutput selections10 MHz Clock, frequency generator output,many internal signalsDebounce filter settings125 ns, 6.425 μs, 2.56 ms, disable; high andlow transitions; selectable per inputBus InterfacePCI/PXI 3.3 V or 5 V signal environmentPCI ExpressForm factor x1 PCI Express, specification v1.0a compliant Slot compatibility x1, x4, x8, and x16 PCI Express slots5PXI ExpressForm factor x1 PXI Express peripheral module,specification rev 1.0 compliant Slot compatibility x1 and x4 PXI Express or PXI Express hybridslots4In other sections of this document, RTSI refers to RTSI <0..7> for the PCI/PCI Express devices or PXI_TRIG <0..7> for PXI/PXI Express devices.5Some motherboards reserve the x16 for graphics use. For PCI Express guidelines, refer to / pciexpress.USB USB 2.0 Hi-Speed or full-speed6, 7DMA channels (PCI/PCI Express/ PXI/PXI Express)6, can be used for analog input, analog output, digital input, digital output, counter/timer 0, counter/timer 1USB Signal Stream4, can be used for analog input, analog output,digital input, digital output, counter/timer 0,counter/timer 1The PXI device supports one of the following features:•May be installed in PXI Express hybrid slots•Or, may be used to control SCXI in PXI/SCXI combo chassisThe PXI Express device can be installed in PXI Express slots or PXI Express hybrid slots.Power RequirementsCurrent draw from bus during no-load condition8PCI/PXI+5 V0.03 A+3.3 V0.725 A+12 V0.35 APCI Express+3.3 V0.925 A+12 V0.35 A6If you are using an USB M Series device in full-speed mode, device performance will be lower and you will not be able to achieve maximum sample/update rates.7Operating on a full-speed bus may result in lower performance.8Does not include P0/PFI/P1/P2 and +5 V terminals.PXI Express+3.3 V0.45 A+12 V0.5 ACurrent draw from bus during AI and AO overvoltage condition8PCI/PXI+5 V0.03 A+3.3 V 1.2 A+12 V0.38 APCI Express+3.3 V 1.4 A+12 V0.38 APXI Express+3.3 V0.48 A+12 V0.71 ACaution USB devices must be powered with an NI offered AC adapter or aNational Electric Code (NEC) Class 2 DC source that meets the power requirementsfor the device and has appropriate safety certification marks for country of use. USB power supply requirements11 to 30 VDC, 20 W, locking or non-lockingpower jack with 0.080 in. diameter center pin,5/16-32 thread for locking collarsCurrent LimitsCaution Exceeding the current limits may cause unpredictable behavior by thedevice and/or PC/chassis.PCI, +5 V terminal 1 A maximum9PCI ExpressWithout disk drive power connector installed+5 V terminals combined0.35 A maximum90.39 A maximumP0/PFI/P1/P2 and +5 Vterminals combined9Older revisions have a self-resetting fuse that opens when current exceeds this specification. Newer revisions have a traditional fuse that opens when current exceeds this specification. This fuse is not customer-replaceable; if the fuse permanently opens, return the device to NI for repair.With disk drive power connector installed+5 V terminal 1 A maximum9P0/PFI/P1/P2 combined0.39 A maximumPXI/PXI Express+5 V terminal 1 A maximum9P0/PFI/P1/P2 and +5 V terminalscombined2 A maximumUSB+5 V terminal 1 A maximum9P0/PFI/P1/P2 and +5 V terminalscombined2 A maximumPower supply fuse 2 A, 250 VPhysical CharacteristicsDimensionsPCI printed circuit board10.6 cm × 15.5 cm (4.2 in. × 6.1 in.) PCI Express printed circuit board9.9 cm × 16.8 cm (3.9 in. × 6.6 in.)(half-length)PXI/PXI Expressprinted circuit boardStandard 3U PXIUSB Screw Terminal enclosure (includes connectors)26.67 cm × 17.09 cm × 4.45 cm (10.5 in. × 6.73 in. × 1.75 in.)USB BNC enclosure (includes connectors)28.6 cm × 17 cm × 6.9 cm (11.25 in. × 6.7 in. × 2.7 in.)USB Mass Termination enclosure (includes connectors)18.8 cm × 17.09 cm × 4.45 cm (7.4 in. × 6.73 in. × 1.75 in.)USB OEM Refer to the NI USB-622x/625x/628x OEMUser GuideWeightPCI149 g (5.2 oz)PCI Express161 g (5.7 oz)PXI222 g (7.8 oz)PXI Express208 g (7.3 oz)USB Screw Terminal 1.2 kg (2 lb 10 oz)USB Mass Termination816 g (1 lb 12.8 oz)USB OEM140 g (4.9 oz)I/O connectorPCI/PCI Express/PXI/PXI Express 1 68-pin VHDCIUSB Screw Terminal64 screw terminalsUSB BNC21 BNCs and 30 screw terminalsMass Termination 1 68-pin SCSIPCI Express disk drive power Standard ATX peripheral connector(not serial ATA)16 to 28 AWGUSB Screw Terminal/BNC screw terminalwiringCalibrationRecommended warm-up timePCI/PXI/PCI Express/PXI Express15 minutesUSB30 minutesCalibration interval 2 yearsMaximum Working VoltageMaximum working voltage refers to the signal voltage plus the common-mode voltage. Channel-to-earth11 V, Measurement Category I Measurement Category I is for measurements performed on circuits not directly connected to the electrical distribution system referred to as MAINS voltage. MAINS is a hazardous live electrical supply system that powers equipment. This category is for measurements of voltages from specially protected secondary circuits. Such voltage measurements include signal levels, special equipment, limited-energy parts of equipment, circuits powered by regulated low-voltage sources, and electronics.Caution Do not use for measurements within Categories II, III, or IV.Note Measurement Categories CAT I and CAT O (Other) are equivalent. These testand measurement circuits are not intended for direct connection to the MAINSbuilding installations of Measurement Categories CAT II, CAT III, or CAT IV.EnvironmentalOperating temperaturePCI/PXI/PXI Express0 ºC to 55 ºCPCI Express0 ºC to 50 ºCUSB0 ºC to 45 ºCStorage temperature-20 ºC to 70 ºCHumidity10% RH to 90% RH, noncondensing Maximum altitude2,000 mPollution Degree (indoor use only)2Indoor use only.Shock and Vibration (PXI and PXI Express Only)Operational shock30 g peak, half-sine, 11 ms pulse (Tested inaccordance with IEC 60068-2-27. Test profiledeveloped in accordance withMIL-PRF-28800F.)Random vibrationOperating 5 Hz to 500 Hz, 0.3 g rmsNonoperating 5 Hz to 500 Hz, 2.4 g rms (Tested in accordancewith IEC 60068-2-64. Nonoperating testprofile exceeds the requirements ofMIL-PRF-28800F, Class 3.)SafetyThis product is designed to meet the requirements of the following electrical equipment safety standards for measurement, control, and laboratory use:•IEC 61010-1, EN 61010-1•UL 61010-1, CSA 61010-1Note For UL and other safety certifications, refer to the product label or the OnlineProduct Certification section.Electromagnetic CompatibilityThis product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use:•EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity•EN 55011 (CISPR 11): Group 1, Class A emissions•AS/NZS CISPR 11: Group 1, Class A emissions•FCC 47 CFR Part 15B: Class A emissions•ICES-001: Class A emissionsNote In the United States (per FCC 47 CFR), Class A equipment is intended foruse in commercial, light-industrial, and heavy-industrial locations. In Europe,Canada, Australia, and New Zealand (per CISPR 11) Class A equipment is intendedfor use only in heavy-industrial locations.Note Group 1 equipment (per CISPR 11) is any industrial, scientific, or medicalequipment that does not intentionally generate radio frequency energy for thetreatment of material or inspection/analysis purposes.Note For EMC declarations and certifications, refer to the Online ProductCertification section.CE ComplianceThis product meets the essential requirements of applicable European Directives, as follows:•2014/35/EU; Low-V oltage Directive (safety)•2014/30/EU; Electromagnetic Compatibility Directive (EMC)•2011/65/EU; Restriction of Hazardous Substances (RoHS)Online Product CertificationRefer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for this product, visit / certification, search by model number or product line, and click the appropriate link in the Certification column.Environmental ManagementNI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial to the environment and to NI customers.For additional environmental information, refer to the Minimize Our Environmental Impact web page at /environment. This page contains the environmental regulations and directives with which NI complies, as well as other environmental information not included in this document.Waste Electrical and Electronic Equipment (WEEE) EU Customers At the end of the product life cycle, all NI products must bedisposed of according to local laws and regulations. For more information abouthow to recycle NI products in your region, visit /environment/weee.电子信息产品污染控制管理办法（中国RoHS）中国客户National Instruments符合中国电子信息产品中限制使用某些有害物质指令(RoHS)。

AEMC 品牌的测试和检测设备产品介绍说明书

Our products are backed by over 130 years of experience in test and measurementequipment, and encompass the latest international standards for quality and safety.An array ofMegohmmetersto choose fromAEMC® offers a full line ofm egohmmeters with testv oltages from 10V to 15kV,(model dependent), capableof measuring i nsulationresistances from 1000Ωto 29TΩ . These rugged,weather r esistant meters area ccurate, r eliable and built toperform. Battery, AC poweredand hand-cranked modelsa re available. MEGOHMMETERSFor all of your Insulation Testing needs...Technical Hotline: (800) 343-1391(2 Technical Assistance (800) 343-1391APPLICATIONS◆ M otors (AC and DC), transformers, cables,switchgears and electrical wiring installations◆ T est industrial commercial wiring andmotor control centers◆ A cceptance testing and preventive maintenance ◆ D omestic and industrial contracting ◆ D ielectric Absorption Ratio (DAR) andPolarization Index (PI) measurements◆ S pot reading tests◆ H igh resistance or absorption tests ◆ T imed resistance measurements ◆ L ow insulation test range for testing oldor flooded installations◆ D rying out conductors ◆ C ontinuity checks◆ C able testing (including telecom)◆ T est transformers◆ H eaters, relays, circuit breakersUnderstanding Insulation Resistance TestingWhy have an insulation testing program?A regular program of testing i nsulation resistance is strongly r ecommended to prevent electrical shocks, assure personal safety and to reduce or e liminate down time. It helps to detect deterioration of i nsulation in order to schedule repair work such as: vacuum c leaning, steamc leaning, drying and rewinding or testing newly installed conductors. It is also h elpful whene valuating the quality of the repairs before the equipment is put back into operation.What causes insulation failure?Some of the more c ommon causes of i nsulation failure include: overloading conductors, excessive heat or cold, moisture, dirt, corrosive vapors, o il, v ibration, aging and nicked wiring.What tests are used to detect insulation d eterioration?There are numerous maintenance tests for assessing i nsulation q uality. The three tests primarily used to test motors, generator and transformer insulation are: polarization index, spot reading and step voltage.What equipment is n ecessary for conducting insulation r esistance tests?◆ M egohmmeter with a timed test function ◆ Temperature indicator◆ H umidity meter (not n ecessary if equipmenttemperature is above the dew point)Four questions for selectingthe proper megohmmeterWhat is the proper v oltage range?Typically 2x equipment operating voltage up to 1000V and equal to the operating voltages above 1000V What is the desired power source? Battery, AC p owered, hand-cranked What is the resistance range of interest? M Ω, G Ω, T ΩWhat type of display is preferred?Analog (best for trend analysis), or Digital (eliminate g uesswork), or gives exact reading and shows trendModel 6555 performing an i nsulation test.Technical Assistance (800) 343-1391 Data Analysis & Reporting Software for MegohmmetersClear and easy setup from one dialog box for Model 5060.Model 5070 includes Step Function which allows programming of three different test profiles, each containing up to five voltage steps between 40 and 5100V and time per step of up to 10 hours.Four tabbed dialog boxes allow for clear and easy setup of all functions of the Model 5070, including setup for variable voltage and alarm set points, as well as step voltage tests and temperature compensation.• Print reports of all test results• Select test voltage and run tests from your computer with a simple click and execute process • Capture and display data in real-time• Retrieve data from the instrument’s memory:• Over 1500 insulation resistance measurements (model dependent)• Over 4000 resistance measurements • Display DAR and PI ratios• Plot graphs of manual and timed tests• Include your analysis comments section with the report • Store a library of setups for different a pplications • Certification of results through report generation• Free updates are available on our website Configure All Functions of: Models 1060, 5060, 5070, 6526, 6534, 6550 & 6555Run test and display text and graphical results from one dialog box.Model 5070 also displays step voltage.Test result s tatus box d isplayscomplete test results in real-timeTest voltage s election Insulation resistanced uring the test run Step voltage duringthe test runInsulation resistancewith temperature compensationTwo easy clicks(Instrument > Run Test) start test and graphs results {▲10V & 100V MegohmmetersAEMC ® offers low voltage insulation testersdesigned for both field and shop use. They are well suited for measuring the qualities of phone cables data cables and ESD Floor Testing. Measurement of AC and DC voltage, resistance, continuity, cable capacitance, cable length and AC c urrent can also be performed.MEGOHMMETER SELECTION GUIDEExpert tools for testing10kV & 15kVDigital MegohmmetersHigh-end portable instruments for measuring avariety of electrical insulation resistance values.The right tools for testing insulation safely and accurately, and are ideal for use on rotating equipment and machinery operating at 10kV or higher. They are fully automated 10,000V and 15,000V graphical insulation testers. They provide insulation measurements up to 29,000G model dependent Test results include DAR, PI, DD, Capacitance,Leakage Current, as well as programmable temperature correction of resistance readings.The 6555ability to program up to three step voltage profiles (from 40 to 10,000 or 15,000V,model dependent), eachcontaining up to ten steps. They also include three ramp profiles and three programmable test voltages in addition tothe standard fixed voltages of 500, 1000, 2500, 5000, 10,000 and 15,000V. These units have a USB interface and a data storage function, which permits storage of test results in files specific to the device under test. The included DataView software configures and runs tests directly from a PC and creates data analysis reports.IP534 (800) 343-1391Note: 1000V, 5000V, 10kV & 15kV megohmmeters offer memory storage and PC connection for report generation (model dependent).500V MegohmmetersAEMC ® offers a complete line of i nsulationtesters designed to test the quality of insulation on equipment powered from sources up to 240V using test voltages up to 500V. Both analog and digital meters are available. AC powered, b attery powered and hand-cranked models are available. Measurements can be in the M Ω, G Ω and T Ω range. Most m odels offer multi-function c apability, measuring AC/DC volts, resistance and continuity, as well as i nsulation resistance.1000V MegohmmetersAEMC ® offers a complete line of i nsulation testers designed to test the quality of insulation using 1000V test voltage (required for testing equipment powered from sources up to 480V ac ). Both a nalog and digital meters are available. AC powered,b attery powered and hand-cranked models are available. Many m odels can measure into the G Ω and T Ω range. Most m odels offer multi-function capability, m easuring AC/DC volts, r esistance andc ontinuity, as well as i nsulation resistance. Both hand-held instruments and rugged instruments built into portable cases are available.5000V MegohmmetersAEMC ® offers a complete line of i nsulation testers designed to test the quality of insulation using 5000V test voltages required for testing large motors, generators, transformers, cables andlarge rotating machinery. AC powered and battery powered models are a vailable. All models can measure into the G Ω and T Ω ranges. All models offer multifunction c apability, measuring AC/DC volts, resistance and continuity, as well as insulation resistance.10kV & 15kV MegohmmetersAEMC ® offers a complete line of safe and accuratei nsulation testers that are ideal for use on rotating equipment and machinery operating at 10kV or higher. They are the only fully automated 10,000V and 15,000V graphical insulation testers. They provide insulation measurements up to 29,000G Ω (29T Ω). Test results include DAR, PI, DD, ∆R, Capacitance, Leakage Current, as wellas programmable temperature correction of resistance readings.Models 6550 & 6555Safely & AccuratelyMODEL 6550Test Voltage 500V, 1000V, 2500V, 5000V, 10,000VInsulation Range 10kΩ to 25,000GΩOther Measurements Auto DAR, PI, DD, ∆R (ppm/V) ratiosLeakage Current 0 to 8mAVoltage Test 40 to 10kVOther Ramp and Voltage Test, Capacitance Measurement,Programmable Current Tests, Ramp & Step Test and Burn TestPower Source NiMH rechargeable batteriesDisplay Digital / AnalogCommunication DataView software/USB optically-isolated portDimensions 13.39 x 11.81 x 7.87"Weight Approx. 13.7lb (6.2kg)Catalog No. 2130.31MODEL 6555Test Voltage 500V, 1000V, 2500V, 5000V, 10,000V, 15,000VInsulation Range 10kΩ to 29,000GΩ (29TΩ)Other Measurements Auto DAR, PI, DD, ∆R (ppm/V) ratiosVoltage Step Test ModeLeakage Current 0 to 8mAVoltage Test 40 to 15kVOther Ramp and Voltage Test, Capacitance Measurement,Programmable Current Tests, Ramp & Step Test and Burn TestPower Source NiMH rechargeable batteriesDisplay Digital / AnalogCommunication DataView software / USB optically-isolated portDimensions 13.39 x 11.81 x 7.87"◆Voltage Ramp Test Mode6 Technical Assistance(800) 343-1391For Electrostatic Discharge TestingModel 65361000V Digital Model 65271000V Model 1015For Testing Motors,Pumps & TransformersModels 6522, 6524 & 6526500V & 1000V Hand-CrankedModel 6503Test Voltage 500, 1000V Insulation Range 100kΩ to 1000MΩResistance Range 1000ΩContinuity Range ±10ΩVoltage Measurement 600V Power Source Eight 1.5V AA batteries Analog Rubber housing Dimensions 6.6 x 4.2 x 2.2"1.45 lbs Catalog No. 1403.01Insulation Measurements for Electrical ComponentsModel 6534M O HET ETechnical Assistance (800) 75000V Digital/AnalogModel 50501000V Digital/Analog Models 1050 & 10605000V Digital/AnalogModel 50605000V Digital/AnalogModel 65055000V GraphicalModel 5070O HM ET ESince its creation in 1893, Chauvin Arnoux customer needs and applications. Over the years, Chauvin Arnoux product lines, i ncluding: c urrent probes, multimeters (the first multimeter patented in 1937!), ground testers, insulation testers, environmental testers and many others in the portable test instrument realm.One product line that stands out is Insulation Testers/Megohmmeters.Our megohmmeter line finds its roots in the early 1900s. Limited technology was available, so agalvanometer and a decade resistance box combined with a DC power source was used to make one of the first megohmmeters. Years later, hand-cranked technology, first using a generator, provided the test voltage. Today, similar technology is used in Model 6503 hand-cranked magnetizer, but a regulated alternator p rovides rectified test voltage and a sealed case protects the meter from the environment. Electronics set in the 1950s and 60s gave birth to e lectronic megohmmeters withelectronic amplifiers. Eventually, digital displays came to the scene, though analog meters remained due to customer habits and preference.Today, megohmmeters are digital and incorporate many intelligent features. Timers, alarms and variable test v oltages are becoming common. AEMC ® introduced a unique line of professional megohmmeters (Models 1050, 1060, 5050, 5060, 5070, 6505, 6527, 6522, 6524, 6526, 6534, 6536, 6550 & 6555) with added features, such as: memory; automated tests and results (internal c alculations of DAR, PI and other measurements); graphical displays; PC control; and, report compliant s oftware. Market feedback has been verypositive and the megohmmeters are setting new industry standards. All AEMC ® manufactured megohmmeters are designed to the latest international safety and testing standards, and are CE marked.Model 6555 Introduced in 2012First Megohmmeter AEMC ® Instruments • 15 Faraday Dr. • Dover, NH 03820 USA • (800) 343-1391•Fax(603)742-2346•E-mail:**************Export Department: +1 (603) 749-6434 x520 • Fax +1(603)742-2346•E-mail:***************© Chauvin Arnoux ®, Inc. d.b.a. AEMC ®I nstruments Call the AEMC ® Instruments Technical Assistance Hotline for immediate consultation with an applications engineer: (800) 343-1391950.BR-MEGOHM_0523 • Printed in the USA M u lt i-p u r p o s e C la m p -O n M e t e r s o tl in 00) 3-1 M E G O H M ME T E R SFor a ll of y ou r I ns ul at io n Te st in g ne ed s...ch ni l H o tl in e: (800) 343-1391.a em c.co mP O W E R Q U A L I T Y Fo r A ll Y ou r Po w er Q ua li ty N ee ds ...Te ca 0043391w w w ( Fo r a ll of yo ur G ro un d In te gr ity T es tin g ne ed s...G R O U N D R E S IS TA N C E T E S TE R S Te ch ni l H ot lin e: (8) 343-139w w w .a em c.co mTEST & MEA SUREM ENTINSTR UMEN TSVOLUM E 23WWW.AEM TECHNICA L HOTLINE : (800) 343-1391Family of ProductsTo learn more, visit 。

704A系列手持测试仪产品介绍说明书

Highlights●Rugged, Lightweight & Hand-Held●RJ-11 Modular JackDual Min-Phone Jacks (Bantam)tion for installation and maintenance of analog voice and data cir-cuits. Users for all models of the 704A-400 Series are DS0/DS1,Central Office (CO), Digital Operations Group (DOG), SpecialServices, and CO/OSP Construction Technicians.A pplicationsServices TestedAll Models perform the following tests:HDSL (E, F and G NoiseFilter, Impulse Noise) POTS, Analog Special Services, PBX Trunks(No CO/PBX Emulation for the 704A-410). The704A-430 and the704A-460 both include CO/PBX Emulation and can be substitutedfor a CO switch or PBX, while the 704A-460 includes CLASS CPEEmulation which can be substituted for CPE at MDF or NID.Facilities Tested/QualifiedAll models perform Facilities Testing/Qualified. These categories© 2005 CXR/Larus Corporation (P/N 96-50000-502, Rev. A)Other product and company names referenced herein may be trademarks or trade names of their respective owners. Features and specifications are subject to change without notice.Sp ecificationsINTERFACESAll Models: 2- or 4-Wire RJ-11, dual Bantam IMPEDANCESAll Models: 100, 135, 600, 900, 1200 Ohm & Bridged PHYSICAL ●Dimensions:9.5 in x 6.33 in x 3.5 in (L x W x H)(Equipped with all options - Less than 2.2 lbs.)9.5 in x 6.33 in x 2.63 in (L x W x H)(Basic 704A-400 Series – Weight approx. 3 lbs.)●Operating Environment: 32°to 122°F (0°to 50°C), 0 to 95% R.H.(Non-Condensing)●Power Requirements: 5 Watts at 115 VAC, 60Hz nominal for 9 VDC external DC power supply ●CLEI Codes:TETMAAE7AA, TETMAAF7AA●Battery: 4 Hours continuous operation from the internal 7.2 VDC NimH pack. Charge time: 14 hours ●2W/4W Interface:RJ-11 C or Dual Bantam (210) connector ●Impedance:100/135/600/900/1200 ohms in terminated mode; >30K Ohms in bridged mode.●Longitudinal Balance:Better than 60dB from 200Hz to 1.5MHz●Audio & Display:Built in speaker with volume control. Display is LCD, 4 line x 20 character●Line Hold:Electronic, internally current limited to 24mA on either the 2W or 4W-XMT port when Off-Hook ●Dial:16 Character DTMF generation, 12 character MF generation, 10 digit Dial Pulse generation●Measurements:Level (dBm), Frequency, Weighted Noise, Notch Noise, Signal to noise ratio, Impulse Noise, Return Loss, 23-Tone Sequence (RMS level/frequency, individual level/frequency, IMD, EDD, S/TD, SNR), Advanced Caller ID CND/CNAM (optional), Line voltage, current and ring voltage, Load Coil Detect, MF/DTMF/Dial Pulse analysisSIGNALING ●Signaling Interfaces:Emulate network and terminal end of Loop Start, Ground Start, Direct Inward Dial, E&M I-IV, Originate or terminate call, Analyze digits, perform transmission tests●Signaling Modes:MF/DTMF/Dial Pulse analysis ●CO Emulation:Wink start or immediate start●Measurements:Pre-wink, wink duration and answer delay for up to 999ms with 1ms resolution●Loop Current Detection:Loop current detector must exceed 20ms to detect a valid off-hook state●DTMF Generation:Transmit level of -7 ±0.2dBm, with 1.5dB twist ●MF Generation:Transmit level of -7 ±0.2dBm●Dial Pulse Generation:-10 Pulses per second with 60% break and 250mS inter-digit time●PBX Emulation Mode:Wink start or immediate start with pre-wink time of 1 sec and wink duration of 250mS ± 2mS ●Measurements:Up to 9999mS maximum post wink time with 1mS resolution and ± 1mS accuracy●Battery Feed:-48 VDC 400 ohm DC feed limited to 24mA ●MF Receiver:All 15 valid MF tones received at levels as low as -30dBm●DTMF Receiver:16 digit receiver (1-9, 0, A, B, C, D, *, #)●Dial Pulse Receiver:12 digit receiver (1-9, 0, *, 3) Range is from 3 to 29 pulses per second with a 10 to 90% break DTMF ANALYSIS ●Frequency Meas:A high/low group frequency accuracy of ±3Hz with 1Hz resolution●Level Meas:A high/low tone group range accuracy of +1.5 to -28dB with 0.1dB resolution and ±0.5dB accuracy●Timing Meas:1mS to 65.5 seconds with 1mS resolution and ±1mS accuracy●Tone Acceptance:Maximum twist of ±10 dB with 35 mS minimum tone duration. 18 dB maximum dial tone level toleranceCLASS SERVICES TESTING (OPTIONAL)●Enhanced Caller/Name ID:Test Functions ●Timing Measurements:1mS to 60 seconds with 1mS resolution and±1mS accuracyCLASS SERVICES TESTING (OPTIONAL - CONTINUED)●Receiver Sensitivity:Carrier must be received at -45dB minimumreceiver sensitivity●FSK Data Detection:Continuous phase coherent FSK detection(1200/2200Hz ±1%) @ 1200 BPS●Ring Voltage Measurements:40 to 140 VAC with 1 volt resolution and ±2 Vaccuracy GENERATOR ●Variable Tone:Frequency adjustable from 50Hz to 1.5MHz in1Hz steps: accurate to within ±0.5Hz●Fixed Tones:Program 50Hz, 100Hz, 1kHz, 5kHz, 8kHz, and 15kHz. (transmit level fixed at 0.0dBm)●ADSL Tones:28kHz, 40kHz, 48kHz, 82kHz, 196kHz, 392kHz (level adj. +13dBm to –40dBm)●Wideband Sweep:400Hz to 3200Hz in 200Hz steps, 4800Hz, 8000Hz, 28kHz, 32kHz, 36kHz, 48kHz, 80kHz, 82kHz. Level adjustable from +13dBm to –40dBm●3–Tone Slope:404Hz, 1004Hz, 2804Hz, each at ±0.5Hz. Level adjustable in 4 steps of 0, -10, -13 and –16dBm ±0.2dBm●2713Hz Loop Back Generated at at ±0.5Hz. Level adjustable as in 3-Tone Slope●Level Accuracy:600/900/1200 ohm mode ±0.1dB from 400 to 10,000Hz; ±0.5dB from 200 to 30,000Hz●100/135 Ohm 4W Mode:±0.2dB from 400 to 30,000. Optional wideband 135 ohm; ±0.5dB from 250 to 1.5MHzLevel adjustable from +13dBm to –40dBm in 0.1dB steps●23-Tone Test:Generate 23-Tone sequence per IEEE-1995 at –6dBm to –40dBm. Measures individualfrequencies and level, RMS composite tone, IMD,EDD, S/TD and S/NR●Return Loss:Continuous generation of band limited noise signal sent at –6 ±1.0dBm in each of three bands●DTMF Generation:XMT level of –7 ±0.2dBm, w/1.5dB twist: freq Accurate to –0.5Hz, 75mS on, 75mS offRECEIVER ●Level Accuracy:+13 to - 72 dBmFor 600, 900 and 1200 ohm impedance :±0.2dB from 200Hz to 20,000Hz For 135 and 100 ohm impedance:±0.5dB from 1,000Hz to 600,000Hz and ±1dB from 600,000Hz to 1,500,000Hz●Frequency:For 50 to 1,500,000 Hz, frequency measurement accuracy is ±1 Hz resolution with 0.005% accuracy with 1Hz resolution●Noise:15 to 95dBrn with 1dBrn resolution and ±1dBrn accuracy from 20 to 90dBrn●Noise Filters:C-MSG, 3KHz Flat (D), Program, 15KHz Flat and E, F and G●Notched Noise:1010Hz notch, with a minimum of 50dB attenuation in the band of 995 to 1025Hz●Signal to Noise Ratio:Holding tone (1004Hz) must be in the range of +6 to –45dB: Measured S/N ratio range from from 10 to 55dB with 1dB resolution and ±2dB accuracy●3-Level lmpulse Noise:Threshold can be set from 30 to 90dBrn: 3 level difference fixed at 4dBrn with a measurement accuracy of ±1dBrn. Blanking interval fixed at 125ms with 3 independent counters●23-Tone Test:Generate 23-Tone sequence per IEEE-743(1995 Edition) at -6dBm to -40dBm.Measures individual frequencies and level, RMS Composite Tone, IMD, EDD, S/TD and S/NR ●Return Loss:Three bands: ERL, SRL-HI, SRL-LO; Range of 0 to -30dB with 1dB resolution and ±1dB accuracy. Continuous generation of band limited noise signal sent at -6 ±1.0 dBm in each of 3 bands ●Line Voltage Measurement 2 to 85 VDC : 0.1 Volt resolution and ±1 Volt accuracy●Line Current Measurement10 to 80mA; 0.1mA resolution and ±1mA accuracyHalcyon 704A-400 SeriesPlease contact CXR for the Ordering Configurations,accessories and options associated with the 704A-400 Series.。

北京聚英翱翔电子有限公司气象百叶盒产品说明书V1.0

气象百叶盒采集器说明书V1.0北京聚英翱翔电子有限责任公司2021年5月目录一、产品介绍 (1)1、产品概述 (1)2、产品特点 (1)3、产品功能 (1)4、型号说明 (1)二、主要参数 (2)三、接口说明 (3)1、RS485接线 (3)2、4-20mA/0-10V接线 (3)四、通讯接线说明 (4)1、RS485级联接线方式 (4)2、模拟量接线方式 (4)五、开发资料说明 (5)1、通讯协议说明 (5)2、Modbus寄存器说明 (5)3、指令列表 (6)5、指令详解 (7)六、测试软件说明 (10)1、软件下载 (10)2、软件界面 (10)3、模拟量数据输入说明 (10)七、参数及工作模式配置 (12)1、设备地址 (12)2、波特率的读取与设置 (12)八、安装尺寸 (13)九、常见问题与解决方法 (13)十、技术支持联系方式 (14)一、产品介绍1、产品概述气象百页盒是针对气象站设计的一款环境数据信息采集设备，可以同时监测空气温湿度、光照度、二氧化碳基本参数，还可以扩展大气压、紫外线、PM2.5等参数采集，使用RS485回传到PLC或其他上位机，实现一体化采集。

本产品位百叶盒外壳形式，可防止户外防淋雨，多应用与农业监测，气象站等设施，用于数据分析。

2、产品特点●DC7-30V宽压供电；●RS485通讯光电隔离；●长寿命、高精度、高重复性、高稳定性；●可同时支持7种环境参数。

3、产品功能●温湿度采集；●光照度采集；●二氧化碳采集；●可拓展大气压、紫外线、PM2.5采集；●支持4-20mA或0-10V信号输出；●0-255设备地址可通过软件设置；●支持波特率：2400,4800,9600,19200,38400,115200(默认9600)。

4、型号说明JY-BYH-WS7-RSAO1:0-10VAO2:4-20mARS:485通讯环境参数７合一气象百叶盒产品厂商标志型号RS4854-20MA/0-10V描述JYBYH-WS2-RS●温湿度-RS485JYBYH-WS2-AO2●温湿度-4-20MAJYBYH-WS4-RS●温湿度、光照、二氧化碳-RS485 JYBYH-WS6-RS●温湿度、光照、二氧化碳、大气压、紫外线JYBYH-WS7-RS●温湿度、光照、二氧化碳、大气压、紫外线、PM2.5二、主要参数参数说明数据接口隔离RS485额定电压DC7-40V二氧化碳范围：0~5000ppm（默认）精度：±(50ppm+3%读数值)光照度范围：0~18.8万Lux 精度：1Lux（25℃）温度范围：-40℃到120℃精度：±0.3℃湿度范围：0-100%RH 精度：±2.0%RH大气压强范围：300-1100HPa 精度：±1HPa紫外线范围范围：0~300mW/cm2PM2.5范围范围：0-1000ug/m 3精度：±10%模拟量输出4-20mA对应-40-120℃0-100%（仅温湿度套餐）0-10V对应-40-120℃0-100%尺寸直径138*高78重量g默认通讯格式9600,n,8,1波特率2400,4800,9600,19200,38400软件支持配套配置软件、控制软件；支持各家组态软件、支持Labviewd等三、接口说明1、RS485接线供电正供电负485A+485B-红色黑色/黄色绿色蓝色2、4-20mA/0-10V接线供电正供电负信号输出信号负红色黑色/黄色绿色蓝色四、通讯接线说明1、RS485级联接线方式电脑自带的串口一般是RS232，需要配232-485转换器(工业环境建议使用有源带隔离的转换器)，转换后RS485为A、B两线，A接板上A端子，B接板上B端子，485屏蔽可以接隔离地。

aemc 2200+ 型 4 线电阻测试仪操作手册说明书

Modelo 6470-B ¡Mida la resistencia d e tierra, la resistividad del suelo y la resistencia de contacto con unsolo instrumento!Kit del Medidor de Resistencia de Puesta Tierra multifuncional modelo 6470-B (150 m [500 pies]): incluye medidor, baterías de NiMH, cable USB óptico, software DataView ®, cargador de batería externo, cable de alimentación 110/240 V(línea), un cable verde de 9 m (30 pies), uno rojo y uno azul de 150 m (500 pies) cada uno, un cable negro y uno verde de 30 m (100 pies), juego de cinco terminales tipo horquilla, cuatro jabalinas de tierra auxiliares, cinta de medición, un estucheportátil y manual del usuario. Nº de catálogo 2135.04E l modelo 6470-B incluye medidor, baterías de NiMH, cable USB óptico, software DataView ®, cargador de batería externo, cable de alimentación de 110/240 V (tensión de línea) ymanual del usuario.Medición de conexión de 4 puntosPrueba de frecuencia La prueba de conexión de 4 puntos muestra las conexiones de conductores, los resultados de la prueba de resistencia de conexión, tensión de prueba y corriente.Prueba de caída de potencial de 3 puntosAlmacenamiento de datos La prueba de caída de potencial de 3 puntos muestra la conexión del cable de prueba, la resistencia de la jabalina de tierra y las resistencias del electrodo de prueba.Muestra los resultados de prueba almacenados en una ubicación específica de la memoria al igual que la función de prueba.Prueba de SchlumbergerLa prueba de Schlumberger muestra la conexión del cable de prueba, los resultados de la prueba de resistividad del suelo (ρ) y la distancia entre los electrodos.Prueba de wennerLa prueba de Wenner muestra la conexión del cable deprueba, los resultados de la prueba de resistividad del suelo (ρ) y la distancia y resistencia entre los electrodos.La pantalla de selección de frecuencia muestra la tensión y frecuencia de prueba seleccionada para la prueba, como también la conexión del cable.¡Pantalla grande!ersonalice las vistas, plantillas e informes e encuentran disponibles actualizaciones los modelos 6470-B, 6471 y 6472%9080727062605250403020100usando el software DataView ®.controlar las mediciones de resistencia de tierra desde su computadora. Los cuadros de diálogos con fichas claras y fáciles de usar permiten configurar las funciones del medidor de resistencia de tierra y configurar y ejecutar las pruebas. Los resultados pueden mostrarse en tiempo real y almacenarse en su PC. Los informes se pueden imprimir junto con los comentarios del usuario.Software DataView ®Pantallas funcionales típicas de DataVie w®para medidores de resistencia de tierraConfiguración del método de doble pinza Caída de potencial, tensión de paso-contactoMedición de 3 puntos selectos con jabalinas múltiples Conexión de 4 puntos para muy bajas resistenciasConexión Resistividad del suelo。

Avoy M7000 M8000型号复合数字模拟式多功能仪表设备说明书

MULTIMETERSDESCRIPTIONThe M7000/M8000 Series of advancedanalogue/digital multimeters fromAVO INTERNATIONAL use the latestmicroprocessor technology to providethe most comprehensive measuringranges and features in a hand heldinstrument.There are four instruments in the range,the two M7000 models are for moregeneral applications yet still incorporatemany advanced features, whereas theM8000 models have been designed toprovide greater accuracy with extensiveadditional measuring capabilities.The M7000 units offer ruggeddependability for use in ﬁeld conditions.Both the M7027 and M7029 are suppliedin rugged yellow cases with wrap aroundrubberised holsters for added protectionagainst mishandling. The main differencebetween the models is that the M7027 hasa basic accuracy of 0,3% and the M7029has a basic accuracy of 0,2%. Both modelshave dual displays and the choice ofoperation in the 4,000 count or the higherresolution 40,000 count mode.The M8000 models provide moreadvance features for applicationsrequiring more extensive measuringcapabilities. The M8037 is the top of therange instrument it measures true rms,a.c. + d.c. and a.c. voltage ranges, which more accurately measure voltage valuesregardless of the waveforms. Square,sawtooth, triangle, pulse trains, spikesas well as distorted waveforms with thepresence of harmonics can all bemeasured accurately.The M8037 also has a backlit display foreasier readings in poorly illuminatedareas. Both the M8035 and M8037 havebasic accuracies of 0.08%, dual displaysand the choice of operation in the manualor autoranging mode.Capacitance, frequency, conductance anddiode test facilities are included asstandard features plus, for moreadvanced measurement applications, theability to recor d, store, sort andcompare results is also provided.4,000/40,000 CountsTo ensure maximum speed, accuracy andresolution, the fast 334digit 4,000 countdisplay updates 5 times per second(nominally). The user-selected 10 x higherresolution mode 434digit count displayupdates approximately every 34s, and isavailable in most measurement functions.Analogue Bar GraphThe 43 segment analogue bar graphupdates 128 times/sec in d.c. voltage andresistance functions enabling the user toeasily detect faulty contacts, identifypotentiometer clicks and indicate signalspikes during adjustments. In othermodes and other functions the bar graphupdates 20 times/sec showing excellenttrending characteristics.Dual DisplayInnovative LCD and microprocessortechnology has been utilised to providedual displays in various modes. Using thisfeature one can simultaneously displaya.c. volts +frequency, a.c. amps +frequency, conductance +resistance,duty cycle +frequency, dbm +frequencyand values +events.Fast 150 µS Audible Continuity TestThe audible continuity test is a quickgo/no-go test that distinguishes betweenan open and a closed circuit. The meterwill give a continuous beep tone when theinput resistance drops below 10 Ω. This isuseful for checking wiring connectionsand operation of switches.Relative FunctionsThere are three different relative modesto choose from; Relative Zero, RelativePercentage and Relative per Unit. InRelative Zero mode the user is allowed tooffset the meter measurements with arelative reference value, thereforesubtracting this reference from anyfurther measurement. In RelativePercentage change mode the bar graphautomatically indicates ±200% or ±20% forfull scale changes with respect to theRelative Reference value which becomescentre zero point. This simpliﬁes zero,peaking, nulling measurements and isexcellent for ﬁne adjustments. The ﬁnalrelative range is Relative per Unit whichshows the ratio of measuring values tothe relative base value. For examplemeasuring the parallel capacitance of co-axial cable or parallel wire in conjunctionwith the Relative per Unit mode, helpsestimate the total cable length or pinpointcable breakdown locations.Record Max, Min, Max-Min andAverageUsing the Record you can easily trackintermittent signals, capture turn-on/turn-off surges and monitor line voltagechanges over a much wider dynamicrange with the highest resolution. Thefaster the sampling speed, the moreaccurate the measurement of surges,spikes and sags will be. The true averagecontinually calculates all readings takenover time.Data Store & Recall (MEM)This feature stores the whole display datain memory for later recall. The memorywill remain even in auto-power-off modeand can also be recalled at any time, evenwhile being operated in anothermeasuring function.APPLICATIONSThe M7000 and M8000 series multimetersare uniquely ﬂexible instruments, ideal foruse in the workshop and in the ﬁeld, butalso suitable for the laboratory. Theprecision of the digital reading, combinedwith the ability to follow trends on theanalogue scale, ensures that thetechnician or engineer is fully equippedfor all testing requirements with just oneinstrument.AVO®MEGGER®M7000/M8000SERIES•4,000 & 40,000 Count•Dual Display•Analogue BargraphUpdates 128 timesevery second•True r.m.s d.c. + a.c. andAverage Responding•Basic Accuracy from 0,3%to 0,08%Dual Display Digital MultimetersSPECIFICATION Display4,000 count (updated every 0,2s)40,000 count (updated every 0,8s)Bargraph (updated every 8 ms)Dual display: 10,000 counts Features Data Hold Data record:50 ms response, autorangemax, min, max-min span, averageStore and RecallRelative zeroing with centre-zero auto-zoom bargraphrelative unitsrelative % changerelative per unit changeQuick Continuity test:response <150 µs, turn on <10 Ω, turnoff >60 ΩLine Frequency ﬁlter:60/50 Hz switchableDiode Test:4,000 count V range, test current (typical) 0,8 mA open circuit <3,5 V d.Automatic PowerOff:5 minutes (default)/5 sec/offInput Warning:on incorrect connection (M8000s only)SafetyM7000 rated to IEC 1010 Cat III 600 V, Cat II 1000 V M8000 rated to IEC 1010 Cat III 1000 VEMCThe meters all comply with EN50081-1 and EN50082-1Model No.M8037M8035M7029M7027A.C. Conversion Type True RMSAverage responding Average responding Average responding Backlit LCD YesN/AN/A N/A Crest/Peak 0,8 ms response, Max, Min 0,8 ms response, Max, Min N/A N/A Max-MinMax-MinSortAuto-ranging, Max, Min, Auto-ranging, Max, Min,N/A N/A Input Warning Audible &Visible N/A N/A Total Functions 55 Ranges40 Ranges40 RangesDCV40 mV to 1 kV in 6 ranges 400 mV to 1 kV in 5 ranges 400 mV to 1 kV in 5 ranges Best Resolution 1 µV10 µV10 µVBasic Accuracy ±0,08% ±1 digit (0,5% ±6d on 40,00 mV)±0,2% ±1 digit ( ±2 digits 1 kV)±0,3% ±1 digit ( ±2 digits 1kV)NMRR @ 50/60 Hz > 60 dB> 60 dB> 60 dBCMRR @ DC >*********.&50/60Hz >*********.&50/60Hz >*********.&50/60Hz ACV400 mV to 750 V in 5 ranges 400 mV to 750 V in 5 ranges 400 mV to 750 V in 5 ranges Best Resolution 10 µV10 µV10 µVBasic Accuracy ±0,5% ±3 digits 50-60 Hz ±0,7% ±3 digits 50-60 Hz ±1% ±3 digits 50-60 Hz Basic Bandwidth 40 Hz - 20 kHz 40 Hz - 1 kHz, 1,5 dB @ 30 k 40 Hz - 1 kHz CMRR @ DC, 50/60 Hz > 60 dB> 60 dB> 60 dBDCA/ACA 400 µA to 10 A in 6 ranges 4000 µA to 10 A in 3 ranges 4000 µA to 10 A in 3 ranges Best Resolution 0,01 µA0,1 µA0,1 µABasic Accuracy from ±0,2% ±2 digits to 1% ±4 digits ±1%±3dig.@60Hz±0,4%±*********.±1,3% ±3 digits @ 60 Hz ±1% dig.@d.c.Resistance 40 to 40 M Ωin 7 ranges 400 to 40 M Ωin 6 ranges 400 to 40 M Ωin 6 ranges Best Resolution 0,001 Ω0,01 Ω0,01 ΩBasic Accuracy <400 k Ω±0,15% ±2 digits; 40 M Ω: 1,5% ±5 digits <400 k Ω±0,3% ±2 dig., 40 M Ω2% ±5 dig.<400 k Ω±0,4% ±2 dig. 40 M Ω±3% ±5 dig. Conductance 400 nS in 1 range 400 nS in 1 range 400 nS in 1 range Best Resolution 0,1 nS0,1 nS0,1 nS Basic Accuracy ±0,7% ±5 digits±0,7% ±5 digits±1% ±5 digitsCapacitance 4 nF to 40 mF in 8 ranges 4 nF to 40 mF in 8 ranges Best Resolution 1 pF1 pFBasic Accuracy 40 nF - 4 µF: 0,8% ±5 digits; <40 nF, >4 µF ±4%40 nF - 4 µF: 0,8% ±5 dig. <40 nF, >4 µF ±4%Frequency 100 Hz to 4 MHz in 6 ranges 100 Hz to 250 kHz in 5 ranges Best Resolution 0,001 Hz 0,001 Hz Basic Accuracy ±0,002% ±3 digits ±0,05% ±4 digitsDuty Cycle 100% in 1 range N/AN/AN/ABest Resolution 0,1%Basic Accuracy ±0,5 digits/kHz ±2 digits (AC + DC)V 4 V to 750 V in 4 ranges N/A N/A N/ABest Resolution 0,1 mVBasic Accuracy ±0,8% ±8 digits (40 Hz - 20 kHz)dBm-60,7 dBm to 81,4 dBm Auto with 20 reference ΩN/A N/A N/ABest Resolution 0,01 dBmBasic Accuracy±0,25 dBm ±2 digits @ 40 Hz to 20 kHzMULTIMETERS。

4EE-14资料

1• 15W Isolated Output • Remote ON/OFF Control • 4:1 Input Range • Efficiency to 82% • Six-Sided Shield • 200KHz Switching FrequencyNOTE: 1.Nominal Input Voltage 24 or 48 VDCMODEL INPUT OUTPUT OUTPUT INPUT CURRENT % EFF.CASENUMBER VOLTAGE VOLTAGE CURRENT NO LOAD FULL LOAD 4EE-014EE-024EE-034EE-044EE-054EE-064EE-074EE-084EE-114EE-124EE-134EE-144EE-154EE-164EE-174EE-189-36 VDC18-72 VDC5 VDC 12 VDC 15 VDC±12 VDC ±15 VDC 5/±12 VDC 5/±15 VDC +5/+12/-5 VDC5 VDC 12 VDC 15 VDC±12 VDC ±15 VDC 5/±12 VDC 5/±15 VDC +5/+12/-5 VDC3000 mA 1250 mA 1000 mA ±625 mA ±500 mA 1500/±310 mA 1500/±250 mA 1500/310/500 mA3000 mA 1250 mA 1000 mA ±625 mA ±500 mA 1500/±310 mA 1500/±250 mA 1500/310/500 mA15 mA 15 mA 15 mA 20 mA 20 mA 20 mA 20 mA 20 mA 10 mA 10 mA 10 mA 15 mA 15 mA 15 mA 15 mA 15 mA810 mA 780 mA 780 mA 780 mA 780 mA 780 mA 780 mA 715 mA 410 mA 390 mA 390 mA 380 mA 380 mA 380 mA 380 mA 350 mA77808080808080807780808282828282EEBEHLMAN2Specifications4E EAll Specifications Typical At Nominal Line,Full Load and 25˚C Unless Otherwise Noted.INPUT SPECIFICATIONS:Input Voltage Range.........................................................................................................................................................24V ....................................................9-36V48V ...................................................18-72VInput Filter....................................................................................................................................................................................................................................Pi TypeOUTPUT SPECIFICATIONS:Voltage AccuracySingle Output........................................................................................................................................................................................................................±1.0% max.Dual +Output........................................................................................................................................................................................................................±1.0% max.-Output........................................................................................................................................................................................................................±3.0% max.Triple,5V .................................................................................................................................................................................................................................±2.0% max.12V/15V .......................................................................................................................................................................................................................±3.0% max.Voltage Balance (Dual).......................................................................................................................................................................................................±1.0% max.Transient Response:Single,25% Step Load Change...........................................................................................................................................................................................<500µsec.Dual,FL-1/2L±1% Error Band.................................................................................................................................................................................................<500µsec.External Trim Adj.Range...............................................................................................................................................................................................................±10%.Ripple & Noise,20MHz BW.........................................................................................................................................................................................10mV RMS,max.75mV p-p max.Temperature Coefficient.....................................................................................................................................................................................................±0.02%/°C Short Circuit Protection......................................................................................................................................................................................................Continuous Line Regulation 1,Single/Dual.............................................................................................................................................................................................±0.2% max.Triple...................................................................................................................................................................................................±1.0% max.Load Regulation 2,Single/Dual...........................................................................................................................................................................................±1.0% max.Triple..................................................................................................................................................................................................±5.0% max.GENERAL SPECIFICATIONS:Efficiency .........................................................................................See Table Isolation Voltage.......................................................................500 VDC min Isolation Resistance.........................................................................109ohms Switching Frequency ..................................................................200KHz,min Operating Temperature Range.........................................-25°C to + 71°C Case Temperature.....................................................................100˚C max.Cooling..........................................................................Free-Air Convection Storage Temperature Range...........................................-55°C to + 105°C EMI/RFI..............................................................Six-Sided Continuous Shield Dimensions...............................................................2.56 x 3.0 x 0.83 inches(65 x 76.2 x 21.1 mm)Case Material................................................Black Coated Copper withNon-Conductive BaseCASE EAll Dimensions In Inches(mm)NOTE:1.Measured From High Line to Low Line2.Measured From Full Load to 1/4 LoadRemote On/Off ControlLogic Compatibility EC-On EC-OffShutdown Idle Current Input Resistance Control Common CMOS or Open Collector TTL >+5.5VDC or Open Circuit<1.8 VDC 10 mA100K ohms (Ein 0 VDC to 9 VDC)Referenced to Input MinusExternal Output TrimmingOutput may optionally be externally trimmed (±10%) with a fixed resistor or an external trimpot as shown.PIN 4PIN 6RT 1OR RT 210K ohms TRIMPOTTRIM DOWNPIN 7PIN 4TRIM UPPIN 6PIN 7PIN 4PIN CONNECTIONPin Single Output Daul Output Triple Output 1.2.3.4.5.6.7.8.+Input-InputNo PinOutput TrimNo Pin+Output-Output+Input -Input +Output Common -Output No Pin No Pin +Input -Input +Output Common -Output +5V Output No PinRemote On/Off ControlTRIPLE OUTPUT LOADING TABLE (1)AmperesMin.(2) Nom.Output Voltage( Pin No.)63 & 53 & 53 & 5+5+12 or -12+15 or -15+12 & -50.250.100.100.10/0.101.50.310.250.31/0.50NOTE:1.Maximum total power from all outputs is limited to 15 watts but no output should be allowed to exceed its maximum current.2.Minimum current on each output is required to maintain specified regulation.BEHLMAN4532 Telephone Road Suite 103 Ventura, CA 93003 80 Cabot Court Hauppauge, NY 11788(805 ) 642-0660 (800)456-2006 Fax (805) 642-0790 e-mail: sales@ (631)435-0410 (800)874-6727 Fax(631)951-4341Web-site: 。

BTS442E2中文资料

Semiconductor Group
3
元器件交易网
BTS 442 E2
Parameter and Conditions
at Tj = 25 °C, Vbb = 12 V unless otherwise specified
Vbb(over) Vbb(o rst) ∆Vbb(over) Vbb(AZ) Ibb(off) IL(off) IGND
5) 6) 7)
At supply voltage increase up to Vbb= 6.5 V typ without charge pump, VOUT ≈Vbb - 2 V see also VON(CL) in table of protection functions and circuit diagram page 7. Meassured without load. Add IST, if IST > 0, add IIN, if VIN>5.5 V
Semiconductor Group
2
元器件交易网
BTS 442 E2 Electrical Characteristics
Parameter and Conditions
at Tj = 25 °C, Vbb = 12 V unless otherwise specified
元器件交易网
PROFET® BTS 442 E2
Smart Highside Power Switch
Features
• Overload protection • Current limitation • Short-circuit protection • Thermal shutdown • Overvoltage protection (including load dump) • Fast demagnetization of inductive loads • Reverse battery protection1) • Undervoltage and overvoltage shutdown with auto-restart and hysteresis • Open drain diagnostic output • Open load detection in ON-state • CMOS compatible input • Loss of ground and loss of Vbb protection2) • Electrostatic discharge (ESD) protection

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

NE677M04NEC's MEDIUM POWERNPN SILICON HIGH FREQUENCYTRANSISTOR2.0±0.1..+1. Emitter 2. Collector 3. Emitter 4. BaseNotes:1. Pulsed measurement, pulse width ≤ 350 µs, duty cycle ≤ 2 %.2. Collector to Base capacitance measured by capacitance meter(automatic balance bridge method) when emitter pin is connected to the guard pin of capacitance meter.3. Electronic Industrail Association of Japan4.DESCRIPTIONNEC's NE677M04 is fabricated using NEC's HFT3 wafer process. With a transition frequency of 15 GHz, the NE677M04is usable in applications from 100 MHz to 3 GHz. The NE677M04provides P1dB of 15 dBm, even with low voltage and low current, making this device an excellent choice for the driverstage for mobile or fixed wireless applications.NEC's NE677M04 is housed in NEC's new low profile/flat lead style "M04" package•HIGH GAIN BANDWIDTH:f T = 15 GHz•HIGH OUTPUT POWER:P -1dB = 15 dBm at 1.8 GHz •HIGH LINEAR GAIN:G L = 15.5 dB at 1.8 GHz•NEW LOW PROFILE M04 PACKAGE:SOT-343 footprint, with a height of only 0.59 mm Flat lead style for better RF performanceFEATURESPART NUMBER NE677M04PACKAGE OUTLINEM04EIAJ 3 REGISTRATION NUMBER2SC5751SYMBOLSPARAMETERS AND CONDITIONSUNITS MINTYPMAX I CBOCollector Cutoff Current at V CB = 5V, I E = 0nA 100I EBO Emitter Cutoff Current at V EB = 1 V, I C = 0nA100h FE DC Current 1 Gain at V CE = 3 V, I C = 20 mA75120150P 1dB Output Power at 1 dB compression point at V CE = 2.8 V, I CQ = 8 mA,dBm 15.0f = 1.8 GHz, P in = 1 dBmG LLinear Gain at V CE = 2.8 V, I CQ = 8 mA, f = 1.8 GHz, P in = -10 dBm dB 15.5MAG Maximum Available Gain 4 at V CE = 3 V, I C = 20 mA, f = 2 GHz dBm 16.0|S 21E |2Insertion Power Gain at V CE = 3 V, I C = 20 mA, f = 2 GHz dB 10.013.5ηc Collector Efficiency at V CE = 2.8 V, I CQ = 8 mA, f = 1.8 GHz,%50P in = 1 dBmNF Noise Figure at V CE = 3 V, I C = 5 mA, f = 2 GHz, Zs =Z OPT dB 1.7 2.5f T Gain Bandwidth at V CE = 3 V, I C = 20 mA, f = 2 GHzGHz 15CreReverse Transfer Capacitance 2 at V CB = 3 V, I C = 0, f = 1 MHzpF0.220.50ELECTRICAL CHARACTERISTICS (T A = 25°C)D CR FCalifornia Eastern LaboratoriesMAG =|S 21||S 12|K - 1).2(K ±Note:1.Operation in excess of any one of these parameters may result in permanent damage.2. Mounted on a 1.08cm 2 x 1.0 mm thick glass epoxy PCB.SYMBOLS PARAMETERS UNITS RATINGSV CBO Collector to Base Voltage V 9.0V CEO Collector to Emitter Voltage V 6.0V EBO Emitter to Base Voltage V 2.0I C Collector Current mA 50P T Total Power Dissipation 2mW 205T J Junction Temperature °C 150T STGStorage Temperature°C-65 to +150ABSOLUTE MAXIMUM RATINGS 1 (T A = 25°C)PART NUMBER QUANTITY NE677M04-T2-A3k pcs./reelORDERING INFORMATIONNE677M04SYMBOLS PARAMETERS UNITS RATINGS R th j-aThermal Resistance from °C/W600Junction to AmbientTHERMAL RESISTANCENote:1. Mounted on a 1.08cm 2 x 1.0 mm thick glass epoxy PCB.TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURECOLLECTOR CURRENT vs.COLLECTOR TO EMITTER VOLTAGEDC CURRENT GAINvs. COLLECTOR CURRENTREVERSE TRANSFER CAPACITANCE vs. COLLECTOR TO BASE VOLTAGETYPICAL PERFORMANCE CURVES (T A = 25 °C)T o t a l P o w e r D i s s i p a t i o n P o u t (m W )Ambient Temperature T A (ºC)R e v e r s e T r a n s f e r C a p a c i t a n c e C r e (p F )Collector to Base Voltage V CB (V)C o l l e c t o r C u r r e n t I C (m A )Collector to Emitter Voltage V CE (V)D C C u r r e n t G a i n (h F E )Collector Current I C (mA)300250200150100500255075100125150Mounted on Glass Epoxy PCB(1.08 cm 2x 1.0 mm (t) )0.5f = 1MH z0.40.30.20.10123456123456780001000100.1110100V CE = 3 VGAIN BANDWIDTH PRODUCT vs. COLLECTOR CURRENTINSERTION POWER GAIN,MAG, MSG vs. COLLECTOR CURRENT INSERTION POWER GAIN,MAG, MSG vs. COLLECTOR CURRENTINSERTION POWER GAIN,MAG, MSG vs. FREQUENCYTYPICAL PERFORMANCE CURVES (T A = 25 °C)NE677M04INSERTION POWER GAIN,MAG vs. COLLECTOR CURRENT NOISE FIGURE, ASSOCIATED GAINvs. COLLECTOR CURRENTG a i n B a n d w i d t h P r o d u c t f T (G H z )Collector Current I C (mA)I n s e r t i o n P o w e r G a i n |S 21e |2, (d B )M a x i m u m A v a i l a b l e P o w e r G a i n M A G (d B )M a x i m u m S t a b l e P o w e r G a i n M S G (d B )Frequency f (mA)I n s e r t i o n P o w e r G a i n |S 21e |2, (d B )M a x i m u m A v a i l a b l e P o w e r G a i n M A G (d B )M a x i m u m S t a b l e P o w e r G a i n M S G (d B )Collector Current I C (mA)I n s e r t i o n P o w e r G a i n |S 21e |2, (d B )M a x i m u m A v a i l a b l e P o w e r G a i n M A G (d B )M a x i m u m S t a b l e P o w e r G a i n M S G (d B )Collector Current I C (mA)I n s e r t i o n P o w e r G a i n |S 21e |2, (d B )M a x i m u m A v a i l a b l e P o w e r G a i n M A G (d B )Collector Current I C (mA)N o i s e F i g u r e N F (d B )Collector Current I C (mA)15105110100V CE = 3 V f = 2 GHz0.1110V CE = 3 V f = 2.5 GHz |S 21e |22520105015110100MAGV CE = 3 V f = 2 GHz881216644200110100G aNF110100A s s o c i a t e d G a i n G a (dB )OUTPUT POWER, POWER GAIN,COLLECTOR CURRENT, COLLECTOREFFICIENCY vs. INPUT POWERTYPICAL PERFORMANCE CURVES (T A = 25 °C)O u t p u t P o w e r P o u t (d b m ) P o w e r G a i n G p (d B )Input Power P in (dBm)NE677M04G PV CE = 3.2 V f = 0.9 GHzI cq = 8 mA (RF OFF)P outηcI c2520151050-20-15-10-5550100150200250C o l l e c t o r C u r r e n t I C (m A ),C o l l e c t o r E f f i c i e n c y ηc (%)OUTPUT POWER, POWER GAIN,COLLECTOR CURRENT, COLLECTOREFFICIENCY vs. INPUT POWERO u t p u t P o w e r P o u t (d b m ) P o w e r G a i n G p (d B )Input Power P in (dBm)0C o l l e c t o r C u r r e n t I C (m A ),C o l l e c t o r E f f i c i e n c y ηc (%)OUTPUT POWER, POWER GAIN,COLLECTOR CURRENT, COLLECTOREFFICIENCY vs. INPUT POWERO u t p u t P o w e r P o u t (d b m ) P o w e r G a i n G p (d B )Input Power P in (dBm)C o l l e c t o r C u r r e n t I C (m A ),C o l l e c t o r E f f i c i e n c y ηc (%)OUTPUT POWER, POWER GAIN,COLLECTOR CURRENT, COLLECTOREFFICIENCY vs. INPUT POWERO u t p u t P o w e r P o u t (d b m ) P o w e r G a i n G p (d B )Input Power P in (dBm)0C o l l e c t o r C u r r e n t I C (m A ),C o l l e c t o r E f f i c i e n c y ηc (%)NE677M04FREQUENCYS 11S 21S 12S 22KMAG 1GHz MAG ANG MAG ANG MAG ANG MAG ANG (dB)NE677M04V C = 2 V, I C = 10 mATYPICAL SCATTERING PARAMETERS (T A = 25°C)Note:1.Gain Calculations:MAG =|S 21||S 12|K - 1 ).2(K –∆ = S 11 S 22 - S 21 S 12When K ≥ 1, MAG is undefined and MSG values are used.MSG =|S 21||S 12|, K = 1 + | ∆ | - |S 11| - |S 22|2222 |S 12 S 21|,MAG = Maximum Available GainMSG = Maximum Stable Gain-j50º-90º+180 0.1000.72-28.0223.85159.390.0176.800.94-17.170.1132.34 0.2000.67-53.3221.19142.900.0261.760.85-30.900.2229.46 0.3000.62-74.4718.36129.520.0353.970.75-41.480.3027.710.4000.57-91.6915.78119.030.0447.840.66-49.210.3826.400.5000.54-105.4213.68110.660.0444.490.60-55.010.4625.440.6000.50-119.1311.77103.580.0441.610.51-57.120.6224.540.7000.48-128.6410.4297.780.0440.180.48-61.530.6923.810.8000.47-136.179.3392.960.0539.740.45-63.910.7523.130.9000.46-143.278.4388.430.0539.290.43-66.990.8222.511.0000.46-148.667.7084.440.0539.400.42-69.400.8721.951.5000.44-170.56 5.3067.310.0640.480.39-82.07 1.1017.661.8000.43179.75 4.4758.550.0641.760.39-89.26 1.1915.821.9000.43176.51 4.2455.720.0741.660.39-91.76 1.2015.332.0000.43173.63 4.0452.970.0742.000.40-94.18 1.2214.872.5000.42159.00 3.2639.730.0842.280.42-105.45 1.2613.003.0000.42144.48 2.7327.190.1040.730.46-115.95 1.2411.643.5000.43129.44 2.3415.060.1138.240.49-125.23 1.1810.674.0000.45115.14 2.04 3.420.1334.920.53-134.51 1.119.994.5000.48102.37 1.79-7.890.1430.390.56-144.23 1.049.715.0000.5091.32 1.59-18.830.1625.330.59-154.880.979.945.5000.5381.53 1.42-29.440.1819.490.62-165.890.909.006.0000.5572.281.27-39.610.2013.490.66-176.840.858.11NE677M04FREQUENCYS 11S 21S 12S 22KMAG 1GHz MAG ANG MAG ANG MAG ANG MAG ANG (dB)NE677M04V C = 3 V, I C = 20 mATYPICAL SCATTERING PARAMETERS (T A = 25°C)Note:1.Gain Calculations:MAG =|S 21||S 12|K - 1 ).2(K –∆ = S 11 S 22 - S 21 S 12When K ≥ 1, MAG is undefined and MSG values are used.MSG =|S 21||S 12|, K = 1 + | ∆ | - |S 11| - |S 22|2222 |S 12 S 21|,MAG = Maximum Available GainMSG = Maximum Stable Gain-j50+0º+0º-90º+1800.1000.58-36.9134.82154.300.0165.530.91-19.740.2835.640.2000.53-67.9729.03135.740.0259.980.78-33.770.3432.230.3000.49-91.4923.80122.190.0255.050.67-43.130.4530.350.4000.46-108.8819.70112.290.0351.060.58-49.180.5628.900.5000.44-121.8716.66104.710.0349.500.52-53.430.6527.72 0.6000.42-135.0014.1698.540.0348.740.45-53.840.8126.720.7000.42-143.2912.4193.350.0349.300.42-57.210.8925.86 0.8000.41-149.6811.0389.030.0350.120.40-58.720.9525.080.9000.41-155.849.9184.930.0450.690.39-61.160.9924.321.0000.41-160.239.0181.350.0451.410.38-63.04 1.0422.481.5000.40-178.96 6.1465.550.0553.280.37-74.89 1.1718.281.8000.39172.52 5.1657.300.0653.310.38-82.12 1.2016.701.9000.39169.64 4.9054.620.0653.310.38-84.61 1.2016.252.0000.39167.05 4.6652.020.0653.160.38-87.15 1.2115.822.5000.39153.59 3.7539.330.0851.370.42-98.84 1.1914.09 3.0000.39139.95 3.1427.210.1048.430.45-109.77 1.1512.83 3.5000.41125.64 2.6815.390.1144.680.49-119.46 1.0912.004.0000.43111.98 2.34 3.970.1340.020.53-129.07 1.0211.724.5000.4599.88 2.06-7.190.1534.900.56-139.110.9511.485.0000.4889.38 1.83-18.070.1629.260.60-150.000.8810.49 5.5000.5180.01 1.64-28.760.1822.900.63-161.270.829.556.0000.5371.101.47-39.120.2016.560.66-172.540.778.69EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS• Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279Internet: 11/22/2002NE677M04FREQUENCYS 11S 21S 12S 22K MAG 1GHz MAG ANG MAG ANG MAG ANG MAG ANG (dB)NE677M04V C = 5 V, I C = 30 mATYPICAL SCATTERING PARAMETERS (T A = 25°C)Note:1.Gain Calculations:MAG =|S 21||S 12|K - 1 ).2(K –∆ = S 11 S 22 - S 21 S 12When K ≥ 1, MAG is undefined and MSG values are used.MSG =|S 21||S 12|, K = 1 + | ∆ | - |S 11| - |S 22|2222 |S 12 S 21|,MAG = Maximum Available GainMSG = Maximum Stable GainLife Support ApplicationsThese NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.j50+0º+0º-90º+1800.1000.53-41.0340.66151.830.0179.560.89-20.300.2136.620.2000.48-73.6632.81132.700.0264.080.75-33.750.3933.320.3000.44-97.5026.31119.350.0256.290.63-42.070.5331.430.4000.42-114.5221.49109.810.0253.440.56-47.070.6630.030.5000.41-127.0018.03102.570.0253.310.50-50.520.7528.750.6000.39-139.8215.2896.730.0353.080.43-50.090.9027.650.7000.39-147.5713.3491.780.0354.050.41-52.990.9826.750.8000.38-153.4711.8387.640.0355.020.40-54.21 1.0224.980.9000.38-159.3110.6283.690.0355.650.39-56.48 1.0623.551.0000.38-163.269.6480.250.0456.160.38-58.27 1.0922.491.5000.37179.14 6.5564.910.0558.220.37-70.16 1.1818.691.8000.37171.01 5.5056.830.0657.930.38-77.47 1.1917.161.9000.37168.30 5.2254.200.0657.510.39-80.11 1.2016.712.0000.37165.83 4.9651.650.0657.410.39-82.71 1.2016.302.5000.37152.63 3.9939.130.0854.900.43-94.79 1.1714.623.0000.37139.29 3.3327.150.0951.630.46-106.02 1.1213.433.5000.38125.14 2.8515.430.1147.270.50-116.01 1.0512.754.0000.40111.70 2.49 4.050.1342.600.54-125.900.9912.914.5000.4399.67 2.19-7.080.1537.080.58-136.090.9111.795.0000.4689.42 1.95-17.990.1631.310.61-147.220.8410.785.5000.4980.22 1.74-28.730.1825.130.65-158.700.789.866.0000.5171.381.56-39.190.2018.620.68-170.080.738.984590 Patrick Henry DriveSanta Clara, CA95054-1817Telephone: (408)919-2500Facsimile:(408) 988-0279Subject:Compliance with EU DirectivesCEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE.CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive.This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.Restricted Substanceper RoHS Concentration Limit per RoHS(values are not yet fixed)Concentration containedin CEL devices-A-AZLead (Pb)< 1000 PPMNot Detected(*) Mercury< 1000 PPM Not DetectedCadmium< 100 PPM Not Detected Hexavalent Chromium< 1000 PPM Not DetectedPBB< 1000 PPM Not DetectedPBDE< 1000 PPM Not DetectedIf you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis.See CEL Terms and Conditions for additional clarification of warranties and liability.。