BTB04-600TRG中文资料

September2001-Ed:1A SENSITIVE GATE TRIACSSymbol Parameter Value Unit I T(RMS)RMS on-state current(360°conduction angle)BTA Tc=90°C4ABTB Tc=95°CI TSM Non repetitive surge peak on-state current(Tj initial=25°C)tp=8.3ms42A tp=10ms40I2t I2t value tp=10ms8A2sdI/dt Critical rate of rise of on-state currentGate supply:I G=50mA dI G/dt=0.1A/µsRepetitiveF=50Hz10A/µs Non repetitive50Tstg Tj Storage and operating junction temperature range-40to+150-40to+110°CTl Maximum lead soldering temperature during10s at4.5mm from case260°C ABSOLUTE RATINGS(limiting values)Symbol ParameterBTA/BTB04-Unit 400T/D/S/A600T/D/S/A700T/D/S/AV DRMV RRMRepetitive peak off-state voltage Tj=110°C400600700V1/6BTA04 T/D/S/A BTB04 T/D/S/A2/6Symbol Parameter Value Unit Rth(j-a)Junction to ambient60°C/WRth(j-c)DC Junction to case for DC BTA 4.4°C/WBTB 3.2Rth(j-c)AC Junction to case for360°conduction angle(F=50Hz)BTA 3.3°C/WBTB 2.4GATE CHARACTERISTICS(maximum values)P G(AV)=1W P GM=40W(tp=20µs)I GM=4A(tp=20µs)V GM=16V(tp=20µs)THERMAL RESISTANCESymbol Test conditions QuadrantBTA/BTB04Unit T D S AI GT V D=12V(DC)R L=33ΩTj=25°C I-II-III MAX.551010mAIV MAX.5101025V GT V D=12V(DC)R L=33ΩTj=25°C I-II-III-IV MAX. 1.5V V GD V D=V DRM R L=3.3kΩTj=110°C I-II-III-IV MIN.0.2V tgt V D=V DRM I G=40mAdI G/dt=0.5A/µsTj=25°C I-II-III-IV TYP.2µs I L I G=1.2I GT Tj=25°C I-III-IV TYP.10102020mAII20204040I H*I T=100mA Gate open Tj=25°C MAX.15152525mA V TM*I TM=5.5A tp=380µs Tj=25°C MAX. 1.65VI DRM I RRM V DRM ratedV RRM ratedTj=25°C MAX.0.01mATj=110°C MAX.0.75dV/dt*Linear slope up toV D=67%V DRM gate openTj=110°C TYP.1010--V/µsMIN.--1010(dI/dt)c*(dI/dt)c=1.8A/ms Tj=110°C TYP.1155V/µs *For either polarity of electrode A2voltage with reference to electrode A1ELECTRICAL CHARACTERISTICSBTA04 T/D/S/A BTB04 T/D/S/A3/6Package I T(RMS)V DRM /V RRMSensitivity SpecificationA V T DSA BTA(Insulated)4400X X600X X700X XBTB(Uninsulated)400X X600XXPRODUCT INFORMATIONORDERING INFORMATIONBTA04 T/D/S/A BTB04 T/D/S/A4/6Fig.3:Correlation between maximum RMS power dissipation and maximum allowable temperature (Tamb and Tcase)for different thermal resistances heatsink +contact(BTB).Fig.4:RMS on-state current versus case temper-ature.1E-31E-21E-11E+01E+11E+25E+2Zth/Rth Fig.5:Relative variation of thermal impedance versus pulseduration.Fig.6:Relative variation of gate trigger current and holding current versus junctiontemperature.Fig.1:Maximum RMS power dissipation versus RMS on-state current (F =50Hz).(Curves are cut off by (dI/dt)climitation)Fig.2:Correlation between maximum RMS power dissipation and maximum allowable temperature (Tamb and Tcase)for different thermal resistances heatsink +contact (BTA).BTA04 T/D/S/A BTB04 T/D/S/A5/6Fig.9:On-state characteristics (maximumvalues).Fig.7:Non repetitive surge peak on-state current versus number ofcycles.Fig.8:Non repetitive surge peak on-state current for a sinusoidal pulse with width:t ≤10ms,and cor-responding value of I 2t.BTA04 T/D/S/A BTB04 T/D/S/A6/6Information furnished is believed to be accurate and reliable.However,STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use.No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics.Specifications mentioned in this publication are subject to change without notice.This publication supersedes and replaces all information previously supplied.STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written ap-proval of STMicroelectronics.The ST logo is a registered trademark of STMicroelectronics ©2001STMicroelectronics -Printed in Italy -All rights reserved.STMicroelectronics GROUP OF COMPANIESAustralia -Brazil -China -Finland -France -Germany -Hong Kong -India -Italy -Japan -MalaysiaMalta -Morocco -Singapore -Spain -Sweden -Switzerland -United Kingdom -U.S.A.Ordering type Marking Package Weight Base qty Delivery modeBTA/BTB04-xxxyBTA/BTB04-xxxyTO-220AB2.3g250Bulks Epoxy meets UL94,V0s Cooling method:Cs Recommended torque value:0.8m.N.sMaximum torque value:1m.N.OTHER INFORMATIONPACKAGE MECHANICAL DATAThis datasheet has been download from: Datasheets for electronics components.。