EE141_s09_hw4_solution
Leviton ATLAS-X1 Cat 6A Component-Rated UTP QUICKP
Page 1 of 2APPLICATIONThe ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack supports 10GBASE-T networks. The jack is part of a complete ATLAS-X1 Cat 6A UTP system, ideal for the most demanding mission-critical network applications. The connector supports emerging technologies and will easily adapt to network trends.SPECIFICATIONThe jack shall meet or exceed the requirements for channel and component-level electrical transmission performance as described in ANSI/TIA-568.2-D (Cat 6A), ISO/IEC11801-1 (Class E A ), and EN 50173-1 (Class E A ). The jack shall be compliant with ANSI/TIA-1096-A, c(UL)us Listed, and be independently verified for electrical transmission performance and power delivery. The jack body shall be made of die-cast zinc and all plastic components shall be made of high-impact, fire-retardant plastic rated UL 94V-0. The jack shall support tool-free termination and re-termination and shall not require a specialized termination tool. The jack wiring shall be universal to accommodate T568A and T568B wiring schemes. The jack shall be available in 13 colors; more than established by the ANSI/TIA-606-C standard. The jack shall be offered in standard and shuttered styles and select jacks shall be supplied with interchangeable icons. The jack shall be compliant with IEEE 802.3 PoE Type 1, 2, 3, 4 (100 watts max).DESIGN CONSIDERATIONS• Use in any QUICKPORT™ housing to support Cat 6A UTP connectivity in surface-mount, flush-mount, or modular furniture outlets and field-configurable panels• Can be used in conjunction with other QUICKPORT snap-in modules for voice/data/video applications over UTP , coax, and fiber• To identify ports, use different colored modules andicons for each application (full selection of ANSI/TIA-606 compatible colors, 13 available)• Robust housing and shutter protects the jack in harsh environmentsATLAS-X1™ Cat 6A Component-Rated UTP QUICKPORT™ Jack6AUJK-xx6, ICONS-ICxFEATURES• Independently tested and guaranteed to exceed all component, permanent link, and channel margins• Patented Retention Force Technology™ (RFT) protects against tine damage and increases system longevity • For Power over Ethernet, RFT maintains contact force between plug and jack, preventing arcing from intermittent disconnects• Unique design supports tool-free termination andre-termination and requires no specialized termination tool • Short jack design supports a wider range of applications (e.g. shallow boxes, enclosures, bend radius, etc.)• Terminates from 26 to 22 AWG solid or stranded conductors for use on various cable types• Robust IDCs can withstand 20 re-termination cycles and jack contacts are tested for 750 plug-mating cycles to ensure system longevity• Available in 13 ANSI/TIA-606-C compatible colors • Tested and approved for use in air-handling spaces (plenum rating) in accordance with UL Standard 2043• Select jacks available with interchangeable icons (voice, data, A/V, blank) for easy ID• Jack with internal shutter protects against dust and debris • Solid metal body dissipates 53% more heat than plastic, minimizing damage from excess heat in PoE applications • Tine geometry prevents arcing damage where plug and jack make contactSTANDARDS & REGULATIONS• ANSI/TIA-568.2-D (Cat 6A)• ISO/IEC 11801-1 (Cat 6A)• EN 50173-1 (Cat 6A)• ANSI/TIA-1096-A (formerly FCC Part 68)• IEC 60603-7 (includes IEC 60512-5-2)• IEC 60512-99-002• IEEE 802.3 PoE Type 1, 2, 3, 4 (100 watts max)• Cisco UPOE, UPOE+ (90 watts max)• Power over HDBaseT™ PoH (95 watts max)• c(UL)us Listed (UL 1863)• UL 2043 Plenum Certified • RoHS 3• ETL verified to meet the IEC 60512-99-002 standard for support of IEEE 802.3 Type 4 PoE (100 watt) applicationsCOUNTRY OF ORIGINUSA and Mexico (Contact Customer Service for details)6AUJK-xx6, ICONS-ICxUSANetwork Solutions Headquarters +1 (800) 722 2082 *******************Leviton Berk-Tek Cable : +1 (800) 237 5835 ************************Asia Pacific+852 3620 2602********************Canada+1 (800) 461 2002**********************Europe+44 (0) 1592 772124 **********************Latin AmericaMX: +52 (55) 2128 6286 LATAM: +52 (55) 2333 5963 *********************Middle East & Africa +971 (4) 247 9800 *******************NETWORK SOLUTIONS PRODUCTS ARE AVAILABLE WORLDWIDE IN OVER 100 COUNTRIES. VISIT US ONLINE AT /NS TO LEARN MORE.Page 2 of 2For further support information, visit /ns/support6AUJK-xx6, ICONS-ICx6AUJK-xx6, ICONS-ICxMECHANICAL SPECIFICATIONSDimensions:See belowMaterials: Jack Body: Die-cast zincSpring-Wire Contacts: High quality, copper-based alloy, plated with 50 microinches of gold for lowest contact resistance andmaximum life Temp. (Storage):Temp. (Installation): Temp. (Operating):Humidity (Max.):WARRANTY INFORMATIONFor Leviton product warranties, go to /ns/warrantyPART NUMBERDescriptionStandard Jack Jack with Shutter GREENPACK™12-Pack Standard Jack ATLAS-X1™ Cat 6A Component-Rated UTP QUICKPORT™ Jack, white 6AUJK-RW66AUJK-SW66AUJK-CW6ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, light almond 6AUJK-RT66AUJK-ST6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, ivory 6AUJK-RI66AUJK-SI6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, yellow 6AUJK-RY66AUJK-SY6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, orange 6AUJK-RO66AUJK-SO6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, crimson 6AUJK-RC66AUJK-SC6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, dark red 6AUJK-RR66AUJK-SR6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, purple 6AUJK-RP66AUJK-SP6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, blue 6AUJK-RL66AUJK-SL66AUJK-CL6ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, green 6AUJK-RV66AUJK-SV6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, gray 6AUJK-RG66AUJK-SG6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, black6AUJK-RE66AUJK-SE66AUJK-CE6ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, brown6AUJK-RB66AUJK-SB6—Green (V)Blue (L)Purple (P)Crimson (C)Dark Red (R)Orange (O)Yellow (Y)Black (E)Gray (G)Ivory (I)Light Almond (T)Brown (B)Color-matched icons (ICONS-ICx) can be ordered separately in 72-quantity packs.x = icon color。
Lenovo ThinkAgile HX7521 Certified Node for SAP HA
Lenovo ThinkAgile HX7521 Certified Node forSAP HANA (Xeon SP Gen 1)Product Guide (withdrawn product)Lenovo ThinkAgile HX Certified Nodes for SAP HANA are designed for deploying industry-leading hyperconvergence software from Nutanix on Lenovo enterprise platforms that feature the Intel Xeon Processor Scalable Family.The ThinkAgile HX Certified Nodes for SAP HANA deliver fully validated and integrated Lenovo hardware and firmware, certified and preloaded with Nutanix software. Nutanix brings the benefits of web-scale technologies to enterprise applications through enterprise storage, data protection, infrastructure resilience, management and analytics, and security.The ThinkAgile HX7521 Certified Node for SAP HANA is a 2U rack-mount system that supports two processors, up to 3 TB of 2666 MHz TruDDR4 memory, 24x SFF hot-swap drive bays with an extensive choice of SAS/SATA SSDs and HDDs, and flexible network connectivity options with 1/10 GbE RJ-45,10 GbE SFP+, and 10/25 GbE SFP28 ports.The ThinkAgile HX7521 Certified Node for SAP HANA is certified by SAP for deploying SAP HANA solutions on hyperconverged infrastructure (HCI) in production environments.The ThinkAgile HX7521 Certified Node for SAP HANA is shown in the following figure.Figure 1. Lenovo ThinkAgile HX7521 Certified Node for SAP HANADid you know?The ThinkAgile HX Certified Nodes for SAP HANA are built on industry-leading Lenovo ThinkSystem servers that feature enterprise-class reliability, management, and security.The ThinkAgile HX Certified Nodes for SAP HANA deliver fully validated and integrated hardware and firmware that is certified with Nutanix software.Click here to check for updatesFigure 2. ThinkAgile HX7521 Certified Node for SAP HANA front viewThe front of the ThinkAgile HX7521 Certified Node for SAP HANA includes the following components: 20x SAS/SATA and 4x AnyBay, or 12x SAS/SATA and 4x AnyBay 2.5-inch hot-swap drive bays One VGA portOne USB 2.0 port with XClarity Controller accessOne USB 3.0 portA Power buttonStatus LEDsFigure 3. ThinkAgile HX7521 Certified Node for SAP HANA rear viewThe rear of the ThinkAgile HX7521 Certified Node for SAP HANA includes the following components: Up to six PCIe expansion slots (2 reserved for SAS HBAs)One LOM card slotOne 1 GbE port for XClarity ControllerOne VGA portTwo USB 3.0 portsTwo hot-swap power suppliesMemoryThe ThinkAgile HX7521 Certified Node for SAP HANA for SAP HANA supports Lenovo TruDDR4 memory. TruDDR4 memory uses the highest-quality components sourced from Tier 1 DRAM suppliers and only memory that meets strict requirements is selected. It is compatibility tested and tuned to maximize performance and reliability.The ThinkAgile HX7521 Certified Node for SAP HANA supports 12 or 24 DIMMs. Each processor has six memory channels, and there are two DIMM slots per channel.1.25m Cat6 Green Cable 00WE131AVFY 1.5m Cat6 Green Cable 00WE135AVFZ 3m Cat6 Green Cable 00WE139AVG010m Cat6 Green Cable 90Y3718A1MT 25m Cat6 Green Cable90Y3727A1MWDescriptionPart number Feature codeThe following table lists transceivers and cables for the 10 GbE SFP+ ports.Table 11. Transceivers and cables for 10 GbE SFP+ portsDescriptionPart numberFeature code10 GbE SFP+ SR transceivers for 10 GbE SFP+ ports Lenovo 10GBASE-SR SFP+ Transceiver 46C34475053Lenovo 10GBASE-LR SFP+ Transceiver 00FE331B0RJOptical cables for 10 GbE SFP+ SR transceivers Lenovo 0.5m LC-LC OM3 MMF Cable 00MN499ASR5Lenovo 1m LC-LC OM3 MMF Cable 00MN502ASR6Lenovo 3m LC-LC OM3 MMF Cable 00MN505ASR7Lenovo 5m LC-LC OM3 MMF Cable 00MN508ASR8Lenovo 10m LC-LC OM3 MMF Cable 00MN511ASR9Lenovo 15m LC-LC OM3 MMF Cable 00MN514ASRA Lenovo 25m LC-LC OM3 MMF Cable00MN517ASRB Passive SFP+ DAC cables for 10 GbE SFP+ ports Lenovo 0.5m Passive SFP+ DAC Cable 00D6288A3RG Lenovo 1m Passive SFP+ DAC Cable 90Y9427A1PH Lenovo 1.5m Passive SFP+ DAC Cable 00AY764A51N Lenovo 2m Passive SFP+ DAC Cable 00AY765A51P Lenovo 3m Passive SFP+ DAC Cable 90Y9430A1PJ Lenovo 5m Passive SFP+ DAC Cable 90Y9433A1PK Lenovo 7m Passive SFP+ DAC Cable00D6151A3RHActive SFP+ DAC cables for 10 GbE SFP+ ports Lenovo 1m Active DAC SFP+ Cable 00VX111AT2R Lenovo 3m Active DAC SFP+ Cable 00VX114AT2S Lenovo 5m Active DAC SFP+ Cable00VX117AT2TSFP+ active optical cables for 10 GbE SFP+ ports Lenovo 1m SFP+ to SFP+ Active Optical Cable 00YL634ATYX Lenovo 3m SFP+ to SFP+ Active Optical Cable 00YL637ATYY Lenovo 5m SFP+ to SFP+ Active Optical Cable 00YL640ATYZ Lenovo 7m SFP+ to SFP+ Active Optical Cable 00YL643ATZ0Lenovo 15m SFP+ to SFP+ Active Optical Cable 00YL646ATZ1Lenovo 20m SFP+ to SFP+ Active Optical Cable00YL649ATZ2The following table lists transceivers and cables for the 25 GbE SFP28 ports. Table 12. Transceivers and cables for 25 GbE SFP28 portsDescription Part number Feature code25 GbE SFP28 SR transceivers for 25 GbE SFP28 portsLenovo 25GBASE-SR SFP28 Transceiver7G17A03537AV1B Optical cables for 25 GbE SFP28 SR transceiversLenovo 0.5m LC-LC OM3 MMF Cable00MN499ASR5 Lenovo 1m LC-LC OM3 MMF Cable00MN502ASR6 Lenovo 3m LC-LC OM3 MMF Cable00MN505ASR7 Lenovo 5m LC-LC OM3 MMF Cable00MN508ASR8 Lenovo 10m LC-LC OM3 MMF Cable00MN511ASR9 Lenovo 15m LC-LC OM3 MMF Cable00MN514ASRA Lenovo 25m LC-LC OM3 MMF Cable00MN517ASRB Passive copper cables for 25 GbE SFP28 portsLenovo 1m Passive 25G SFP28 DAC Cable7Z57A03557AV1W Lenovo 3m Passive 25G SFP28 DAC Cable7Z57A03558AV1X Lenovo 5m Passive 25G SFP28 DAC Cable7Z57A03559AV1Y Active optical cables for 25 GbE SFP28 portsLenovo 3m 25G SFP28 Active Optical Cable7Z57A03541AV1F Lenovo 5m 25G SFP28 Active Optical Cable7Z57A03542AV1G Lenovo 10m 25G SFP28 Active Optical Cable7Z57A03543AV1H Lenovo 15m 25G SFP28 Active Optical Cable7Z57A03544AV1J Lenovo 20m 25G SFP28 Active Optical Cable7Z57A03545AV1KPower supplies and cablesThe ThinkAgile HX7521 Certified Nodes for SAP HANA ship with two 1100W (230V/115V) Platinum hot-swap power supplies listed in the following table.Table 13. Power suppliesDescription Featurecode QuantityThinkSystem 1100W (230V/115V) Platinum Hot-Swap Power Supply AVWF2The ThinkAgile HX7521 Certified Nodes for SAP HANA ship with or without power cords depending on the selected option. The following table lists the rack power cables and line cords that can be ordered for the ThinkAgile HX7521 Certified Nodes for SAP HANA.Table 14. Power cablesDescription PartnumberFeaturecodeRack power cables1.0m, 13A/100-250V, C13 to IEC 320-C14 Rack Power Cable4L67A08367B0N5 1.2m, 16A/100-250V, 2 Short C13s to Short C20 Rack Power Cable47C2491A3SW1.5m, 13A/100-250V, C13 to IEC 320-C14 Rack Power Cable4L67A08368B0N62.0m, 13A/125V-10A/250V, C13 to IEC 320-C14 Rack Power Cable4L67A083696570 2.5m, 16A/100-250V, 2 Long C13s to Short C20 Rack Power Cable47C2492A3SX 2.8m, 13A/125V-10A/250V, C13 to IEC 320-C14 Rack Power Cable4L67A083706400 2.8m, 16A/100-250V, 2 Short C13s to Long C20 Rack Power Cable47C2493A3SY 4.1m, 16A/100-250V, 2 Long C13s to Long C20 Rack Power Cable47C2494A3SZ 4.3m, 13A/125V-10A/250V, C13 to IEC 320-C14 Rack Power Cable4L67A083716583 Line cordsArgentina 2.8m, 10A/250V, C13 to IRAM 2073 Line Cord39Y79306222 Argentina 4.3m, 10A/250V, C13 to IRAM 2073 Line Cord81Y23846492 Australia/New Zealand 2.8m, 10A/250V, C13 to AS/NZS 3112 Line Cord39Y79246211 Australia/New Zealand 4.3m, 10A/250V, C13 to AS/NZS 3112 Line Cord81Y23836574 Brazil 2.8m, 10A/250V, C13 to NBR 14136 Line Cord69Y19886532 Brazil 4.3m, 10A/250V, C13 to NBR14136 Line Cord81Y23876404 China 2.8m, 10A/250V, C13 to GB 2099.1 Line Cord39Y79286210 China 4.3m, 10A/250V, C13 to GB 2099.1 Line Cord81Y23786580 Denmark 2.8m, 10A/250V, C13 to DK2-5a Line Cord39Y79186213 Denmark 4.3m, 10A/250V, C13 to DK2-5a Line Cord81Y23826575 Europe 2.8m, 10A/250V, C13 to CEE7-VII Line Cord39Y79176212 Europe 4.3m, 10A/250V, C13 to CEE7-VII Line Cord81Y23766572 India 2.8m, 10A/250V, C13 to IS 6538 Line Cord39Y79276269 India 4.3m, 10A/250V, C13 to IS 6538 Line Cord81Y23866567 Israel 2.8m, 10A/250V, C13 to SI 32 Line Cord39Y79206218 Israel 4.3m, 10A/250V, C13 to SI 32 Line Cord81Y23816579 Italy 2.8m, 10A/250V, C13 to CEI 23-16 Line Cord39Y79216217 Italy 4.3m, 10A/250V, C13 to CEI 23-16 Line Cord81Y23806493 Japan 2.8m, 12A/125V, C13 to JIS C-8303 Line cord46M2593A1RE Japan 2.8m, 12A/250V, C13 to JIS C-8303 Line Cord4L67A083576533 Japan 4.3m, 12A/125V, C13 to JIS C-8303 Line Cord39Y79266335 Japan 4.3m, 12A/250V, C13 to JIS C-8303 Line Cord4L67A083626495 Korea 2.8m, 12A/250V, C13 to KS C8305 Line Cord39Y79256219 Korea 4.3m, 12A/250V, C13 to KS C8305 Line Cord81Y23856494 South Africa 2.8m, 10A/250V, C13 to SABS 164 Line Cord39Y79226214 South Africa 4.3m, 10A/250V, C13 to SABS 164 Line Cord81Y23796576Switzerland 2.8m, 10A/250V, C13 to SEV 1011-S24507 Line Cord 39Y79196216Switzerland 4.3m, 10A/250V, C13 to SEV 1011-S24507 Line Cord 81Y23906578Taiwan 2.8m, 10A/250V, C13 to CNS 10917-3 Line Cord 81Y23756317Taiwan 2.8m, 15A/125V, C13 to CNS 10917-3 Line Cord 81Y23746402Taiwan 4.3m, 10A/250V, C13 to CNS 10917-3 Line Cord 81Y23896531Taiwan 4.3m, 15A/125V, C13 to CNS 10917-3 Line Cord 81Y23886530United Kingdom 2.8m, 10A/250V, C13 to BS 1363/A Line Cord 39Y79236215United Kingdom 4.3m, 10A/250V, C13 to BS 1363/A Line Cord 81Y23776577United States 2.8m, 10A/250V, C13 to NEMA 6-15P Line Cord 46M2592A1RF United States 2.8m, 13A/125V, C13 to NEMA 5-15P Line Cord 00WH5456401United States 4.3m, 10A/250V, C13 to NEMA 6-15P Line Cord 4L67A083616373United States 4.3m, 13A/125V, C13 to NEMA 5-15P Line Cord4L67A08360AX8ADescriptionPart number Feature code Rack installationThe ThinkAgile HX7521 Certified Nodes for SAP HANA ship with a rail kit. The following table lists the rail kit options that are available for selection.Table 15. Rack kit selection optionsDescription Feature codeQuantity (min / max)4-post rail kitsThinkSystem Tool-less Slide RailAXCA 0 / 1ThinkSystem Tool-less Slide Rail Kit with 2U CMA AXCH0 / 1Lockable front bezelThinkSystem 2U Security BezelAURX0 / 1Configuration note: One of the rail kits is required for selection.The following table summarizes the rail kit features and specifications.Table 16. Rail kit features and specifications summaryFeature Tool-less Slide RailWithout CMA With 2U CMA CMA Not included IncludedRail length 730 mm (28.74 in.)807 mm (31.8 in.)Rail typeFull-out slide (ball bearing)Tool-less installation Yes In-rack maintenance Yes 1U PDU support Yes 0U PDU support Limited*Rack type IBM and Lenovo 4-post, IEC standard-compliant Mounting holesSquare or roundTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®AnyBay®Lenovo ServicesThinkAgile®ThinkSystem®TruDDR4XClarity®The following terms are trademarks of other companies:Intel® and Xeon® are trademarks of Intel Corporation or its subsidiaries.Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Microsoft®, PowerShell, Windows PowerShell®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.。
AquaMaster 4 软件 FEW410 430 和 FET410 430 软件版本 3KXF2
—A B B M E A SU R EM ENT & A N A LY TI C S | R ELE A S E NOTE | R N/FE W410/FE W430/FE T410/FE T430/001-EN R E V BAquaMaster4 softwareFEW410/430 and FET410/4301 Software change detailsNew features:• Diagnosis for detecting default sensor setting due to NV memory issues.Bug fixes:• Totalizer reset option enabled with “Advance Access Level” for Non - Metrology approved devices.• Excessive power consumption in sensor.• Sensor firmware update.2 RecommendationsThis upgrade is advised for:• Devices with the above-mentioned issues • Devices that have software/firmware part code as mentioned in the release note.3 Product supportEmail: **********************.com—AquaMaster 4software FEW410/430 and FET410/430Software version:3KXF208402U0113/03.04.00 Release date: 15th June 2023Measurement made easyR N /F E W 410/F E W 430/F E T 410/F E T 430/001-E N R e v . B 06.2023—We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction,disclosure to third parties or utilization of its contents – in whole or in parts – isforbidden without prior written consent of ABB. ©ABB 2023—ABB LimitedMeasurement & Analytics Oldends Lane,Stonehouse, GL10 3TA United KingdomTel: +44 (0) 1453 826661 Fax: +44 (0) 1453 829671email: **********************.com/measurement。
Shimadzu GC-2014C184-E014F 产品说明书.pdf_1718759513.25
GC-2014Big Performance & Small Space GC-2014Improved design and innovative technology for all of our injectors, detectors and fl ow controllers equal or surpass our GC-2010 the high-end technology leader.High PerformanceSuperior PerformanceLarge LCD, all digital gases control and auto-diagnostics inherited from the GC-2010 – “The Most advanced, easy-to-use interface”Easy OperationExcellent User InterfaceUse any column types for any analysis. Packed or capillary columns give you the freedom to choose the best technique for your measurement. Fully integrated multiple valve systems are made simple for optimum performance for SystemGC custom GC products.FlexibilityExpandability for Every SituationSimple nozzle replacement supports both capillary and packed columns.Our New FPD is used for all columnsDetectorsHolophotal Flame Photometric DetectorPhotomultiplierFilter Lens Nozzle The detectors have been completely redesigned, incorporating the GC-2010 detector designs for capillary analyses and the GC-14 detector designs for packed columns. This TCD-2014 unit is ideal for packed column measurements employing the semi-diffusion cell designInjection unitswith unsurpassed accuracyThe design of the SPL-2014 capillary column sample injection unit is based on the GC-2010 technology.This accuracy was unattainable with previous models.The packed column sample injection unit employs the proven design of the GC-14 injection unit.Easier to understand, simpler operationLarge display, help functions and pop-up screens Loaded with productivity-enhancing functionsEasy OperationA large LCD displays chromatograms and method parameters.This is a great improvement for Chromatopacs systems that do not have these real time displays.Graphical user interface enables quick setting of all analytical conditions.The built-in Help function almost eliminates need for familiarization training.Large displayshows most analysis details at a glance,ideal for Chromatopac users.Graphical popup screen that clearly indicates thepolarity so manual injection errors are prevented when using the dual packed column system.Polarity display prevents injection errorsEasy-to-understand Pop-up ScreensChromatogram display Graphical U/IBuilt-in Help FunctionLarge Display6Self-diagnosticsUnit control check Hardware diagnosis Save and check diagnosis logGC-2014250mmGC-14230mmSolenoid valve unitManual fl ow controllersAFCSpeci fi cationsDetectorsTemperature range Temperature settingNo. of units installed simultaneously Detector type 400°C max. (FID, TCD, FTD) 350°C max. (ECD, FPD) 1°C stepsUp to 4 units (restricted depending on detector type) FID, TCD, ECD, FPD, FTD for capillary/packedDual fl ow rate differential system400°C max.3pgC/s (dodecane)107Quartz glass Standard: for packed, Option: for capillaryFlame Ionization Detector (FID) SystemTemperature rangeMinimum detected quantityDynamic rangeNozzleThermal Conductivity Detector (TCD)System Temperature range Dynamic range Sensitivity Dual fl ow rate differential system400°C max.10540,000mV · mL/mg (built-in pre-ampli fi er, with 10 × ampli fi cation)Electron Capture Detector (ECD)SystemTemperature range Minimum detected quantity Dynamic range Fixed current system using 63Ni370MBq radiation source 400°C max.0.1pg/s (γ-BHC)104Flame Photometric Detector (FPD)Temperature range Dynamic rangeMinimum detected quantity 350°C max.P: 104S: 103P: 0.5pgP/s (tributyl phosphate) S: 8pgS/s (dodecane thiol)Flame Thermionic Detector (FTD)Temperature range Dynamic rangeMinimum detected quantity (Two types, one for capillary and one for packed. The speci fi cation are the same.) 400°C max.N: 103P: 103N: 0.4pgN/s (azobenzene)P: 0.05pgP/s (malathion)Display240 × 320 dot graphics display (30 characters × 16 lines)Dimensions, Weight, Power Requirements (GC main unit)Dimensions WeightPower Requirements 400 (W) × 690 (H) × 607 (D) mm48kg (GC-2014AF model)AC100V/120V 230V1800VA (GC-2014AF model) or2600VA (GC-2014AF model), 50/60HzColumn OvenTemperature range DimensionsOven capacity Temperature accuracy Temperature deviation Temperature variation coef fi cient Temperature program steps Programmed rate setting range Total time for all steps Linear heating rangeCooling rateColumns accepted (Ambient + 10°C) ~ 400°C (using liquid CO2 gas*: -50°C ~400°C)250 (W) × 360 (H) × 175 (D) mm15.8LSet value (K) ± 1% (calibration at 0.01°C increments)2°C max. (on 200mm dia. circumference 30mm from rear)0.01°C/°CUp to 20 (cooling program possible)-250°C ~ 250°C/min9999.99 minutes max.30°C/min up to 150°C20°C/min up to 250°C10°C/min up to 380°C7°C/min up to 400°C (at 25°C ambient temperature)300°C ~ 50°C in 6 min max. (at 25°C ambient temperature)Capillary columns: 2Packed columns for GC14B: 4 (Glass columns: 2)Sample Injection UnitTemperature rangeHeating settingsNo. of units installed simultaneously Sample injection unit types Up to 400°C1°C stepsUp to 3 unitsDual packed, single packed, split/splitless, direct, direct (AMC)Carrier Gas Flow Controller For Packed / DualFlow rate setting range Programmable steps Programmed rate setting range Correction function 0 ~ 100mL/min7-400 ~ 400mL/minMaintains column fl ow rate during column oven heatingFor Capillary Split/Splitless, Direct (Split/splitless injection mode)Pressure setting range Programmable steps Programmed rate setting range Split ratio setting rangeTotal fl ow rate setting range Correction function 0 ~ 970kPa7 (pressure-decreasing program possible)-400 ~ 400kPa/min0 ~ 9999.90 ~ 1200mL/minMaintains column average linear velocity during column oven heating (for capillary only)(Pressure mode direct injection)Pressure setting range Programmable steps Programmed rate setting range Correction function 0 ~ 970kPa/min7-400 ~ 400kPa/minMaintains column average linear velocity during column oven heating (for capillary only)(Flow-rate mode direct injection)Flow rate setting range Programmable steps Programmed rate setting range 0 ~ 1200mL/min 7-400 ~ 400mL/minFor Single Packed, Direct (AMC)Flow rate setting range Correction function 0~100mL/minMaintenance column fl ow rate during column oven heating*Optional parts are required to use liquid CO2 gas.。
Datasheet MLX90614 中文 数据手册 rev008
10-位 PWM 输出模式是连续输出所测物体温度的标准配置，测量物体的温度范围为-20…120 °C，分辨 率为 0.14 °C。PWM 通过修改 EEPROM 内 2 个单元的值，实际上可以根据需求调整至任何温度范围，而这对 出厂校准结果并无影响。
传感器的测量结果均出厂校准化，数据接口为数字式的 PWM 和 SMBus(System Management Bus) 输出。
作为标准，PWM 为 10 位，且配置为-20˚C 至 120 ˚C 内，分辨率为 0.14 ˚C 的连续输出。
传感器出厂默认，上电复位时为 SMBus 通信。
3901090614 Rev 008
PWM 引脚也可配置为热继电器(输入是 To)，这样可以实现简单且性价比高的恒温控制器或温度报警(冰 点/沸点)应用，其中的温度临界值是用户可编程的。在 SMBus 系统里，这个功能可以作为处理器的中断信号， 以此触发读取主线上从动器的值，并确定精度条件。
传感器有两种供电电压选择：5V 或 3V(电池供电)。其中，5V 也可简便的从更高供电电压(例如 8 至 16V)上通过外接元件调制。(具体请参考“应用信息”)
MLX90614 connection to SMBus
图 1: 典型应用电路
2 概述
MLX90614 是一款用于非接触式的红外温度传感器，集成 了红外探测热电堆芯片与信号处理专用集成芯片，全部封装 在 TO-39。
低噪声放大器、17 位 ADC 和强大的 DSP 处理单元的全 集成，使传感器实现了高精度，高分辨率的测量。
E+H溶解氧分析仪 中文
０ ｍｉｎ
０．．．２０００（ｍｉｎ）Ｓ
ห้องสมุดไป่ตู้
0 min P2
Err.Delay
备注 对于传感器及过程监测 的设置
根据Ｆ２中的单位选择 以Ｓ或 ｍｉｎ来输入报警延时 如Ｐ５＝ＡＣ 或ＡＣ＋ＣＣ，报警延时为有效
6
Ｐ３
低 报 的 阈 值 ０．００ｍｇ／ｌ
０．００．．．２０．００ｍｇ／ｌ
０．００％ ＳＡＴ ０．０．．．２００．０％ ＳＡＴ
Altitude
Ａ４
输入测量值的
阻尼系数
1 １．．．６０
1 A4
Damping
测量值阻尼是取一定数 量的测量值作平均值 它被用于稳定波动非常 厉害的测量值 如果输 入１ 则没有阻尼
2
５．２．２．ＳＥＴＵＰ ２
代码
含义
Ｂ
功能组
ＳＥＴＵＰ ２
Ｂ１
盐度
选择或范围 的出厂设定
０．０％ ０．０．．．４．０％
lin O2
Sel.Type
该特性的斜体可以是正 或负 模拟或表格特性参阅 ０２（２） ０２（３）
０２１１
选择电流范围
４－２０ ０－２０
０２１２
０／４mA对 应 的 值 输入相应的氧
量值或温度值
０．００ ｍｇ／ｌ ０．００．．．２０．００ ｍｇ／ｌ ０．０％ＳＡＴ ０．０．．．２００．０％ ＳＡＴ ０．０ -１０．０．．．６０．０
数值可以增加或改变 输入的数值会自动地 以电充上升顺序排列．
read O231
Sel.Table
1 O232
No.Elem.
输出Ｘ和Ｙ数据组的数量 （Ｘ指测量值和Ｙ指相应的 电流值）
1 O233
Ezi-SERVOII-EC operating manual for TRIO 'MC4N'说明书
24VDC connection port Input power & connect to Motion Perfect v4 program
▣ Program Operation
Connect to Program
Activating program window
not operating jog motion and the other axis to specified to +1 operating jog motion as set to jog speed
2. If all axis to change to – value , Jog motion will stop.
FASTECH’s ESI (XML) file has been sent to TRIO already, and TRIO has registered all related information on common firmware of TRIO MC4N EtherCAT master .
▣ Program installation
/ site access -> user registration To download program , User registration is required.
▣ Program installation
▣ Program Operation
After clicking the controller menu from the toolbar , click to Load firmware menu to down load F/W (TRIO master F / W Lim _ Our Drive F / W containing information)
罗氏免疫发光E411参数
可提供在线维修服务功能
可外接鼠标
水质要求：< 10 μS/cm 或者> 0.1 mega ohm,无菌
水耗（近似）：3 L供250测试，12 mL/循环
系统储水容器：3 L
废液储存容量：4 L
可存放3个TIP/CUP架（每架可置放120个TIP头和60个反应杯）
固体废物容量：1100 TIP头和反应杯
双份缓冲液， Procell/CleanCell (PC/CC)；每瓶380 mL容量
缓冲液近似等于2 mL/循环
试剂仓温度：20℃±3℃
检测区温度: 28℃±0.3℃
缓冲液温度：28℃±2℃
孵育区温度：37℃±0.3℃
孵育区域容量：32个反应杯
反应杯容量：200 μL
（学习的目的是增长知识，提高能力，相信一分耕耘一分收获，Байду номын сангаас力就一定可以获得应有的回报）
E411技术参数
全自动、连续、随机的免疫分析系统
电化学发光、异相免疫分析、竞争法，夹心法和桥接法
控制单元：包括Window XP embedded操作系统，触摸屏
处理单元：包括样本试剂区、反应测量区、供应区
86测试/小时
18个，可放置不同18种试剂，试剂仓温度20℃±3℃
血清、血浆、尿液、其它
30个样本/盘，样本盘为连续加样模式
可储存160种不同校准品条码信息
每个测试可储存25条定标曲线信息
可储存300个试剂信息
试剂上机稳定可达8周
试剂液面水平自动检测功能
最大稀释比例达1:100
试剂盒附有二维条码，储存试剂、定标等信息
可存储100种不同质控品条码信息
JST 电子连接器产品参考手册说明书
---PLATING OPTION-ROW OPTION-STACKER HEIGHT-SM-OTHER OPTION01 thru 50(Through-hole)02 thru 36(Surface mount)Specify LEAD STYLE from chart–F= Gold flash on contact,Matte Tin on tail –L= 10 µ" (0.25 µm) Gold on contact area of longer tail, Matte Tin on tail –G= 10 µ" (0.25 µm) Gold on contact area of longer tail, Gold flash on balance –T= Matte Tin–S = Single Row –D = Double Row –T= Triple Row (Through-hole only)–Q= Double Row .200" (5.08 mm) row space (Through-hole only)–“XXX”= Stacker Height (in inches)Through-hole =(5.08 mm) .200" Min.Surface mount =(6.35 mm) .250"Min.Leave blank for Through-hole–“XXX”= HW-TH Tail Length (in inches) (1.40 mm) .055"min.Example: –250= (6.35 mm) .250"–LL= Locking Lead (Through-hole only) (Shortest dimension between the tail and the post is the end that will be crimped. Available on tails from (2.29 mm) .090" to (7.87 mm).310" only.)Single row, 01 & 02 positions & –Q row not available –“XXX”= Polarized (Specify omitted pin position)–A= Alignment Pin (Metal or plastic at Samtec discretion)(Surface mount only)–TR= Tape & Reel (4–27 pins per row only)(Not Available on Lead Styles 10, 11, 12 & 20)(Surface mount only)–FR= Full Reel Tape & Reel (must order max. quantity per reel; contact Samtec for quantity breaks) (4–27 pins per row only)(Not Available on Lead Styles 10, 11, 12 & 20)(Surface mount only)Insulator Material:HW-SM Top = Natural LCP HW-SM Bottom = Black LCP HW-TH = Natural LCP Terminal Material: Phosphor Bronze Plating:Au or Sn over50 µ" (1.27 µm) NiOperating Temp Range:-55 °C to +125 °C with Gold -55 °C to +105 °C with TinLead–Free Solderable: YesSMT Lead Coplanarity:(0.15 mm) .006" max**(.004" stencil solution may be available; contact **************)Notes:For added mechanicalstability, Samtec recommends mechanical board spacers be used in applications with gold or selective gold plated connectors. ************************more information.This Series is non-standard,non-returnable.HWBoard Mates:SSW, SSQ, ESW, ESQ, CES, SLW, BSW, BCS, SSM, HLE, PHF Cable Mates:IDSS, IDSDHW-THHW—SM–Q* same as –T except middlerow pins are removedOther platingsLocking Clip available with double row HW-SM(Manual placement required)FLEXIBLE .025" SQ BOARD STACKERSUnless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice.F-224。
维亚维诺 SmartClass 4800 网络测试仪产品说明书
With the ability to test electrical and optical Ethernet links as well T1and E1 interfaces, the SmartClass 4800 allows technicians to test all common business class interfaces. T echnicians can test the quality of voice services regardless of whether they are delivered via VoIP or PRI. The industry’s smallest handheld instrument can test throughout the service life cycle, including service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed VNF per RFC 6349 and, J-Profiler help field technicians test their networks faster and more accurately than ever before.Key Benefitsy Optimized for field use witha multitouch screen, scripted workflows, and clear resultsy Supports efficient best practices with repeatable methods and proceduresKey Featuresy Electrical (10/100/1000) and optical (100M, 1GE, 10GE) Ethernet interfacesy Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564y Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed VNF™ TCP throughput testingy Compatible with VIAVI fiber microscopes, and optical power metersy Supports the Datacom Expansion Module (DEM), which expands the testing of legacy technologies, specifically Datacom serial interfacesApplicationsy Business services installations, service activation and troubleshootingy Mobile and backhaul characterization, validation, and troubleshootingBrochureVIAVISmartClass 4800Tool of choice for all-in-one service testingOptimized for business services installation teams, the SmartClass 4800 is the modern tool for ensuring data and voice services achieve expected key performance indicators (KPI).Best Practice Workflow (Single and Multiple Services):1. J-QuickCheck: Basic Connectivity and Throughput Test2. Single-Service: Enhanced RFC 25443. Multi-Service: Y.1564 SAMComplete For Ethernet KPI Verification4. J-Proof Layer 2 Control Plane Transparency Test5. RFC 6349 TrueSpeed VNF:Layer 4 TCP ThroughputThis test workflow is applicable to Ethernet Business Services and Wireless Backhaul network topologies.TrueSAM Saves Valuable Service Activation TimeT est better and quicker with automated tests combined into one ultimate installation tool:y J-QuickCheck — a fast, automated test (RFC 2544, Y .1564) for validating end-to-end and auto-negotiation configurationy Enhanced RFC 2544 — an automated turn-up test for validating key performance indicators (KPIs)/concurrently measuring SLAs such as throughput, frame delay , delay variation, frame loss, and committed burst size (CBS) — optionaly Y .1564 SAMComplete — an automated service verification test that speeds the installation of multiple classes of services (COS)y TrueSpeed VNF per RFC 6349 — an automated, standards-based test that can save up to 25% of operating expenses (OpEx) and reveals the reason for slow file downloads, eliminating finger-pointingy Interoperable with VIAVI Fusion for throughput testing, including TrueSpeed VNF and Fusion QT-600Optimized for Field TechniciansThe SmartClass 4800 makes testing Ethernet and voice services easy: y All test interfaces are readily availabley Compact form factor for easy portability: 7 x 9.5 x 3 in (17.8 x 24.1 x 7.62 cm) y Large 7 in multi-touch displayy T ablet-like interface for easy navigation through test information and advanced workflows y Integrated WiFi and Bluetooth lets you easily connect test sets and offload resultsCompatible with VIAVI Solutions Fiber Test ToolsThe SmartClass 4800 is compatible with :y The P5000i and FiberChek fiber microscope for connector end-face inspection and analysis y MP-Series optical power meters for optical power and loss measurementsOptimized for Easy Field Usey Fixed test interfaces eliminate loose pluggable modules y LEDs indicate plug-ins for testsy A streamlined user interface provides simple pass/fail, green/red results y Extended battery life enables longer test times y Boots up rapidly from power-on to test startSmartClass 4800SmartClass 4800PEthernetEthernetEthernetEthernet LAN/WANPart of the Leading T-BERD/MTS Test PortfolioStrataSyncEmpower Y our AssetsStrataSync is a hosted, cloud-enabled solution for managing assets, configurations, and test data on VIAVI instruments. It ensures that all instrument software is current and the latest options are installed. StrataSync lets you manage inventory , test results, andperformance data anywhere with browser-based ease while it also improves technician and instrument efficiency. StrataSync manages and tracks test instruments, collects and analyzes results from the entire network, and it informs and trains the workforce.VIAVI StrataSync enabledCommon Application BaseSame user interface + same results + same methods and proceduresActivate services more quickly andaccuratelyReduce mean time to repair (MTTR) on network problemsT est the widest range of traditional and emerging telecom interfacesEnables Network Evolution — Today and TomorrowThe SmartClass 4800 meets leading-edge, carrier-grade Ethernet requirements: y Ensures reliability with link and service OAM (IEEE 802.3ah, 802.1ag, and ITU-T Y .1731)y Validates network scalability with VLAN, Q-in-Q, MAC-in-MAC, MPLS, and VPLS tunnelling technologiesy Full-featured VoIP and IP video turn-up and troubleshooting tests y Supports packet transport network (PTN) evolution with MPLS-TPtechnologyEnhanced RFC 2544 with J-QuickCheck SAMComplete per ITU-T Y .1564Fusion TrueSpeed VNF per RFC 6349© 2021 VIAVI Solutions Inc.Product specifications and descriptions in this document are subject to change without notice.Patented as described at /patentsSmartClass4800-br-tfs-tm-ae 30168388 911 0821C ontact Us+1 844 GO VIAVI(+1 844 468 4284)To reach the VIAVI office nearest you, visit /contact。
Cisco Secure ACS 购买指南说明书
Ordering GuideCisco Secure ACSThis document provides guidance on how to order Cisco Secure Access Control System (ACS) family products. It includes information on upgrade scenarios as well as information on software and hardware service offerings.OverviewCisco® ACS is designed to address both current and future corporate network access policy challenges. The world’s most trusted enterprise access and policy platform, it is used by more than 40,000 enterprises worldwide.The Cisco Secure ACS family includes:●Cisco Secure ACS: The Cisco flagship access and policy system, Cisco Secure ACSsupports up to hundreds of thousands of users and tens of thousands of network devices and is ideal for medium or large enterprises.●Cisco Secure ACS View: A dedicated reporting and monitoring device designed tocomplement Cisco Secure ACS, View helps ensure the highest level of network accesscontrol and compliance.●Cisco Secure ACS Express: Ideal for small and medium-sized businesses (SMBs) ormedium/small enterprises, ACS Express is an easy-to-deploy device with built-in reporting and monitoring. It supports up to 50 devices and 350 users.Cisco Secure ACSCisco Secure ACS is available as software for Windows servers (ACS for Windows) and as a dedicated appliance (ACS Solution Engine). Product part numbers are shown in Table 1. For guidelines on Cisco Secure ACS deployment, see the deployment guide at/en/US/products/sw/secursw/ps2086/prod_white_papers_list.html.Table 1. Cisco Secure ACS New Order Part NumbersPart Number DescriptionCSACS-4.2-WIN-K9 Cisco Secure ACS 4.2 for WindowsCSACSE-1113-K9 Cisco ACS Solution Engine – Cisco 1113 hardware with ACS version 4.2 preinstalledFor ACS for Windows, Software Application Support (SAS) is available. SAS entitles customers to maintenance and minor updates, plus access to online resources and support services.For ACS Solution Engine, SAS is required for software coverage and SMARTnet® is required for hardware coverage. SMARTnet has various service options to provide the hardware replacement coverage desired. For more information on SAS and SMARTnet, please visit/en/US/products/svcs/ps3034/ps2827/serv_category_home.html.Software upgrades are available for current ACS for Windows and ACS Solution Engine customers. Customers that have SAS contracts are entitled to minor upgrades. For example, a customer with SAS running ACS version 4.0 software would be entitled to ACS 4.1 and 4.2 upgrades. Customers that do not have SAS contracts can purchase minor upgrades. Part numbers for minor upgrades are identified by the “MR” designation.Customers that have SAS contracts can obtain upgrade kits using the Product Upgrade Tool (requires login) at /upgrade.SAS contracts do not cover major upgrades and these upgrades must always be purchased. For example, customers running ACS for Windows version 3.3 software that want to upgrade to ACS version 4.2 must purchase the upgrade part number CSACS-4.2-WINUP-K9.Upgrade part numbers are shown in Table 2. Note that there are different part numbers for ACS for Windows and ACS Solution Engine software upgrades.Table 2. Cisco Secure ACS Upgrade Part NumbersPart Number DescriptionCSACS4.2-WIN-MR-K9 ACS for Windows minor upgrade for customers with ACS for Windows versions 4.0 or 4.1 CSACS-4.2-WINUP-K9 ACS for Windows major upgrade for customers with ACS for Windows versions earlier than 4.0 CSACSE4.2-SW-MR-K9 ACS Solution Engine minor upgrade for customers with versions 4.0 or 4.1 (1112 or 1113hardware required)CSACSE-4.2-SWUP-K9 ACS Solution major upgrade for customers with versions earlier than 4.0 (1112 or 1113hardware required)CSACSE-1113-UP-K9 ACS Solution Engine hardware and software upgrade – for customers with 1111 or 1112hardware; includes Cisco 1113 hardware with ACS version 4.2 installedImportant: ACS Solution Engine version 4.2 is only supported on Cisco 1112 and 1113 hardware. Customers with Cisco 1111 hardware should consider upgrading to 1113 by purchasing CSACSE-1113-UP-K9. Trade-in credit may also be available through the Cisco Technology Migration Program (TMP).Cisco Secure ACS ViewCisco Secure ACS View collects and correlates data from multiple Cisco Secure ACS servers and logs to provide aggregate views of system activity as well as detailed information at the transaction level for both network access and device administration. Cisco Secure ACS View provides essential information for network monitoring and planning, access problem detection and troubleshooting, and entitlement and compliance reporting.Cisco Secure ACS View is recommended for all ACS 4.2 deployments. For guidelines on Cisco Secure ACS View deployment, see the deployment guide at/en/US/products/ps9302/prod_white_papers_list.html.Cisco Secure ACS View part numbers are shown in Table 3.Table 3. Cisco Secure ACS View Part NumbersPart Number DescriptionCSACS4.0-VIEW-K9 Cisco Secure ACS View appliance with ACS View 4.0 software and license for managing twoACS servers (version 4.1.4 or 4.2 required). ACS View does not support ACS Express.CSACS4.0-VIEWLIC License for managing an additional ACS server with Cisco Secure ACS View 4.0.For the ACS View appliance, an SAS contract is required for software coverage and SMARTnet isrequired for hardware coverage. SAS entitles customers to maintenance and minor updates, plusaccess to online resources and support services.Cisco Secure ACS ExpressCisco Secure ACS Express offers a comprehensive yet simplified feature set, a user-friendlygraphical user interface, and an attractive price point that allows placement of this product insituations where Cisco Secure ACS for Windows or Cisco Secure ACS Solution Engine may notbe suitable.Cisco Secure ACS Express part numbers are shown in Table 4.Table 4. Cisco Secure ACS Express Part NumbersPart Number DescriptionCSACS-5.0-EXP-K9 Cisco Secure ACS Express 5.0 applianceFor ACS Express, an SAS contract is required for software coverage and SMARTnet is requiredfor hardware coverage. SAS entitles customers to maintenance and minor updates, plus access toonline resources and support services.For More InformationPlease check the Cisco Secure ACS homepage at /go/acs for the latestinformation about Cisco Secure ACS.For more information contact the ACS marketing team at *****************, or contact youraccount representative.Printed in USA C07-500695-00 10/08。
ROHM Solution Simulator 用户指南.pdf_1705892277.949866
User’s Guide ROHM Solution SimulatorAutomotive High Precision & Input/Output Rail-to-Rail CMOS Operational Amplifiers (Quad Op-Amps) TLR4377YFV-C – Voltage Follower– DC Sweep simulationThis circuit simulates DC sweep response with Op-Amp as a voltage follower. You can observe the output voltage when the input voltage is changed. You can customize the parameters of the components shown in blue, such as VSOURCE, or peripheral components, and simulate the voltage follower with the desired operating condition.You can simulate the circuit in the published application note: Operational amplifier, Comparator (Tutorial). [JP] [EN] [CN] [KR] General CautionsCaution 1: The values from the simulation results are not guaranteed. Please use these results as a guide for your design.Caution 2: These model characteristics are specifically at Ta=25°C. Thus, the simulation result with temperature variances may significantly differ from the result with the one done at actual application board (actual measurement).Caution 3: Please refer to the Application note of Op-Amps for details of the technical information.Caution 4: The characteristics may change depending on the actual board design and ROHM strongly recommend to double check those characteristics with actual board where the chips will be mounted on.1 Simulation SchematicFigure 1. Simulation Schematic2 How to simulateThe simulation settings, such as parameter sweep or convergence options,are configurable from the ‘Simulation Settings’ shown in Figure 2, and Table1 shows the default setup of the simulation.In case of simulation convergence issue, you can change advancedoptions to solve. The temperature is set to 27 °C in the default statement in‘Manual Options’. You can modify it.Figure 2. Simulation Settings and execution Table 1.Simulation settings default setupParameters Default NoteSimulation Type DC Do not change Simulation TypeParameter Sweep VSOURCE VOLTAGE_LEVEL from 0 V to 5 V by 0.1 VAdvanced options Balanced - Convergence Assist -Manual Options .temp 27 - SimulationSettingsSimulate3 Simulation Conditions4 Op-Amp modelTable 3 shows the model pin function implemented. Note that the Op-Amp model is the behavior model for its input/output characteristics, and no protection circuits or the functions not related to the purpose are not implemented.5 Peripheral Components5.1 Bill of MaterialTable 4 shows the list of components used in the simulation schematic. Each of the capacitors has the parameters of equivalent circuit shown below. The default values of equivalent components are set to zero except for the ESR ofC. You can modify the values of each component.Table 4. List of capacitors used in the simulation circuitType Instance Name Default Value Variable RangeUnits Min MaxResistor R1_1 0 0 10 kΩRL1 10k 1k 1M, NC ΩCapacitor C1_1 0.1 0.1 22 pF CL1 10 free, NC pF5.2 Capacitor Equivalent Circuits(a) Property editor (b) Equivalent circuitFigure 3. Capacitor property editor and equivalent circuitThe default value of ESR is 0.01 Ω.(Note 2) These parameters can take any positive value or zero in simulation but it does not guarantee the operation of the IC in any condition. Refer to the datasheet to determine adequate value of parameters.6 Recommended Products6.1 Op-AmpTLR4377YFV-C : Automotive High Precision & Input/Output Rail-to-Rail CMOS Operational Amplifier (QuadOp-Amp). [JP] [EN] [CN] [KR] [TW] [DE]TLR2377YFVM-C : Automotive High Precision & Input/Output Rail-to-Rail CMOS Operational Amplifier (DualOp-Amp). [JP] [EN] [CN] [KR] [TW] [DE]TLR377YG-C : Automotive High Precision & Input/Output Rail-to-Rail CMOS Operational Amplifier. [JP] [EN] [CN] [KR] [TW] [DE]LMR1802G-LB : Low Noise, Low Input Offset Voltage CMOS Operational Amplifier. [JP] [EN] [CN] [KR] [TW] [DE] Technical Articles and Tools can be found in the Design Resources on the product web page.NoticeROHM Customer Support System/contact/Thank you for your accessing to ROHM product informations.More detail product informations and catalogs are available, please contact us.N o t e sThe information contained herein is subject to change without notice.Before you use our Products, please contact our sales representative and verify the latest specifica-tions :Although ROHM is continuously working to improve product reliability and quality, semicon-ductors can break down and malfunction due to various factors.Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM.Examples of application circuits, circuit constants and any other information contained herein areprovided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production.The technical information specified herein is intended only to show the typical functions of andexamples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information.The Products specified in this document are not designed to be radiation tolerant.For use of our Products in applications requiring a high degree of reliability (as exemplifiedbelow), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems.Do not use our Products in applications requiring extremely high reliability, such as aerospaceequipment, nuclear power control systems, and submarine repeaters.ROHM shall have no responsibility for any damages or injury arising from non-compliance withthe recommended usage conditions and specifications contained herein.ROHM has used reasonable care to ensur e the accuracy of the information contained in thisdocument. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information.Please use the Products in accordance with any applicable environmental laws and regulations,such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations.W hen providing our Products and technologies contained in this document to other countries,you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act.This document, in part or in whole, may not be reprinted or reproduced without prior consent ofROHM.1) 2)3)4)5)6)7)8)9)10)11)12)13)。
EFLOW用户指南 Release 12.3说明书
Path
:
Online
: True
RestartNeeded : False
2. Set execution policy and verify.
Set-ExecutionPolicy -ExecutionPolicy AllSigned -Force
Get-ExecutionPolicy AllSigned
5
EFLOW User's Guide, Release 12.3
3. Download and install EFLOW.
$msiPath = $([io.Path]::Combine($env:TEMP, 'AzureIoTEdge.msi')) $ProgressPreference = 'SilentlyContinue' Invoke-WebRequest "https:∕∕aka.ms∕AzEFLOWMSI_1_4_LTS_X64" -OutFile $msiPath
▶ The Windows host OS with virtualization enabled ▶ A Linux virtual machine ▶ IoT Edge Runtime ▶ IoT Edge Modules, or otherwise any docker-compatible containerized application (runs on
AES 1235 品牌 BNS 产品名称 磁性安全传感器 型号 101170049说明书
DATASHEETDataOrdering dataNote (Delivery capacity)Phased-out product Product type description AES 1235101170049Article number (ordernumber)EAN (European Article4030661297118 Number)27-37-18-19eCl@ss number, version12.027-37-18-19eCl@ss number, version11.027-37-18-19eCl@ss number, version9.0EC001449ETIM number, version7.0EC001449ETIM number, version6.0Available until31.12.2023Approvals - StandardsCertificates BGcULusGeneral dataStandards BG-GS-ET-14BG-GS-ET-20EN IEC 62061EN ISO 13849-1EN IEC 60947-5-1EN IEC 60947-5-3EN IEC 60947-5-5EN IEC 60204-1EN IEC 60947-1Climatic stress EN 60068-2-3BG-GS-ET-14Enclosure material Glass-fibre reinforced thermoplastic, ventilated Gross weight240 gGeneral data - FeaturesStop-Category0Wire breakageYesdetectionCross-circuit detection YesFeedback circuit YesYesAutomatic resetfunctionReset afterYesdisconnection of supplyvoltageEarth connectionYesdetectionYesIntegral systemdiagnostics, statusNumber of LEDs12Number of normallyclosed (NC)1Number of normallyopen (NO)Number of undelayed2semi-conductor outputswith signaling functionNumber of safety2contactsNumber of signalling2outputsSafety classificationStandards EN ISO 13849-1EN IEC 61508Safety classification - Relay outputsdPerformance Level, uptoCategory3PFH value 1.00 x 10⁻⁷ /hNotice for max. 50,000 switching cycles/year and max. 80% contact load2Safety Integrity Level(SIL), suitable forapplications inMission time20 Year(s)Mechanical data20,000,000 OperationsMechanical life,minimumMounting Snaps onto standard DIN rail to EN 60715Mechanical data - Connection techniqueTerminal designations IEC/EN 60947-1Termination rigid or flexibleScrew terminals M20 x 1.5Cable section, minimum0.25 mm²2.5 mm²Cable section,maximumTightening torque of0.6 NmClipsMechanical data - DimensionsWidth22.5 mmHeight100 mmDepth121 mmAmbient conditionsDegree of protection ofIP40the enclosureDegree of protection ofIP54the mounting spaceDegree of protection ofIP20clips or terminalsAmbient temperature+0 ... +55 °CStorage and transport-25 °Ctemperature, minimumStorage and transport+70 °Ctemperature, maximumResistance to vibrations10...55 Hz, Amplitude 0.35 mm, ± 15 % Restistance to shock30 g / 11 msAmbient conditions - Insulation valuesRated impulse4 kVwithstand voltage UimpOvervoltage category IIIDegree of pollution2Electrical dataFrequency range50 Hz60 HzOperating voltage24 VAC -15 % / +10 %24 VDC -10 % / +20 %Ripple voltage10 %Thermal test current 6 ARated operating voltage24 VACRated operating voltage24 VDC20.4 VACRated AC voltage forcontrols, 50 Hz,minimum26.4 VACRated control voltage atAC 50 Hz, maximum20.4 VACRated AC voltage forcontrols, 60 Hz,minimum26.4 VACRated control voltage atAC 60 Hz, maximum20.4 VDCRated AC voltage forcontrols at DC minimumRated control voltage at28.8 VDCDC, maximum5 WElectrical powerconsumption0.1 ΩContact resistance,maximumin new stateNote (Contactresistance)Drop-out delay in case80 msof power failure,typically20 msDrop-out delay in caseof emergency, typically100 msPull-in delay atautomatic start,maximum, typically20 msPull-in delay at RESET,typicallyMaterial of the contacts,Ag-Ni 10 and 0.2 µm gold-plated electricalElectrical data - Safe relay outputsVoltage, Utilisation230 VACcategory AC-156 ACurrent, Utilisationcategory AC-15Voltage, Utilisation24 VDCcategory DC-136 ACurrent, Utilisationcategory DC-13Switching capacity,10 VDCminimum10 mASwitching capacity,minimum250 VACSwitching capacity,maximum8 ASwitching capacity,maximumElectrical data - Digital inputs10 … 30 VDCInput signal, HIGHSignal "1"0 … 2 VDCInput signal, LOW Signal"0"40 ΩConduction resistance,maximumElectrical data - Digital OutputVoltage, Utilisation24 VDCcategory DC-120.1 ACurrent, Utilisationcategory DC-12Electrical data - Relay outputs (auxiliary contacts) Switching capacity,24 VDCmaximumSwitching capacity,2 AmaximumElectrical data - Electromagnetic compatibility (EMC)EMC rating EMC-DirectiveIntegral system diagnosis (ISD)Note (ISD -Faults)The following faults are registered by the safety monitoring modules and indicated by ISD.Faults Failure of the safety relay to pull-in or drop-outFailure of door contacts to open or closeCross-wire or short-circuit monitoring of the switch connectionsInterruption of the switch connectionsFault on the input circuits or the relay control circuits of the safety monitoring moduleOther dataNote (applications)Safety sensorGuard systemNoteNote (General)Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of asuitable circuit.Wiring exampleNote (Wiring diagram)The wiring diagram is shown with guard doors closed and in de-energised condition.To secure a guard door up to PL d and Category 3Monitoring 1 guard door(s), each with a magnetic safety sensor of the BNS rangeThe ISD tables (Intergral System Diagnostics) for analysis of the fault indications andtheir causes are shown in the appendix.Expansion of enable delay time: The enable delay time can be increased from 0.1 s to1 s by changing the position of a jumper link connection under the cover of the unit.The feedback circuit monitors the position of the contactors K3 and K4.Start push button: A start push button (NO) can optionally be connected into thefeedback circuit. With the guard door closed, the enabling paths are then not closeduntil the start push button has been operated.If only one external relay or contactor is used to switch the load, the system can beclassified in Control Category 3 to ISO 13849-1, if exclusion of the fault “Failure of theexternal contactor” can be substantiated and is documented, e.g. by using a reliabledown-rated contactor. A second contactor leads to an increase in the level of securityby redundant switching to switch the load off.If neither start button nor feedback circuit are connected, a jumper connection must bemounted between X1 and A1.Modification for 2 NC contacts: The safety monitoring module can be modified tomonitor two NC contacts by bridging the terminals A1 and X2. In this configuration, theshort-circuit detection becomes inoperative.Ordering codeProduct type description:AES 123(1)(1)56without start-up test6with start-up testDocumentsOperating instructions and Declaration of conformityAES 1235 / AES 1236(245.3 kB, 10.05.2019, Revision D)BG-test certificateAES and BNS - BG-GS-ET-14 - AES 1135 / AES 1136 / AES 1145 / AES 1146 / AES 1155 / AES 1156 / AES 1165 / AES 1166 / AES 1175 / AES 1176 / AES 1235 / AES 1236 / AES 1265 / AES 1266 / AES 1185(1.4 MB, 10.05.2019, Revision F)BG-test certificateAES - BG-GS-ET-20 - AES 1135 / AES 1136 / AES 1145 / AES 1146 / AES 1155 / AES 1156 / AES 1165 / AES 1166 / AES 1175 / AES 1176 / AES 1235 / AES 1236 / AES 1265 / AES 1266(738.9 kB, 10.05.2019, Revision D)UL CertificateAES / FWS / BNS / BN(415.3 kB, 01.08.2019)Wiring example (electr. wiring)AES 123x(19.6 kB, 10.05.2019)Wiring example (electr. wiring)AES 123x(19.7 kB, 10.05.2019)InfoAES 1135 / AES 1136 / AES 1165 / AES 1166 / AES 1185 / AES 1235 / AES 1236(34.3 kB, 30.06.2021)SISTEMA-VDMA library(659.5 kB, 23.03.2023)PicturesProduct picture (catalogue individual photo)ID: kaes1f09| 711.0 kB | .jpg | 265.642 x 529.167 mm - 753 x 1500 px - 72 dpi| 84.7 kB | .png | 74.083 x 147.461 mm - 210 x 418 px - 72 dpiWiring exampleID: maes1l11| 34.0 kB | .cdr || 143.8 kB | .jpg | 352.778 x 408.517 mm - 1000 x 1158 px - 72 dpiWiring exampleID: kaes1l41| 34.1 kB | .cdr || 139.5 kB | .jpg | 352.425 x 396.875 mm - 999 x 1125 px - 72 dpiK.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 WuppertalThe details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.Generated on: 27/07/2023, 01:44。
莫贾V2416A系列迷你型无风扇、振动防护计算机产品介绍说明书
V2416A SeriesCompact,fanless,vibration-proof computers for rolling stock applicationsFeatures and Benefits•Intel Celeron/Core i7processor•Two hot-swappable2.5-inch HDD or SSD storage expansion trays•Dual independent DVI-I displays•2Gigabit Ethernet ports with M12X-coded connectors•2CFast sockets for OS backup•M12A-coded power connector•Compliant with EN50121-4•Complies with all EN50155mandatory test items1•IEC61373certified for shock and vibration resistance•Ready-to-run Debian7,Windows Embedded Standard7,and Windows10Embedded IoT Enterprise2016LTSB platforms•-40to70°C wide-temperature models available•Supports SNMP-based system configuration,control,and monitoring(Windows only)CertificationsIntroductionThe V2416A Series embedded computers are based on the Intel3rd Gen processor and feature4RS-232/422/485serial ports,dual LAN ports,and 3USB2.0hosts.In addition,the V2416A computers provide dual DVI-I outputs and comply with the mandatory test items of the EN50155 standard,making them suitable for a variety of industrial applications.The CFast socket,SATA connectors,and USB sockets provide the V2416A computers with the reliability needed for industrial applications that require data buffering and storage expansion.Most importantly,the V2416A computers come with2hot-swappable storage trays for inserting additional storage media,such as hard disk or solid-state drives,and support hot swapping for convenient,fast,and easy storage replacement. Each storage tray has its own LED to indicate whether or not a storage module is plugged in.The V2416A Series computers come preinstalled with a choice of Linux Debian7or Windows Embedded Standard7to provide programmers with a familiar environment in which to develop sophisticated,bug-free application software at a low cost.1.This product is suitable for rolling stock railway applications,as defined by the EN50155standard.For a more detailed statement,click here:/doc/specs/EN_50155_Compliance.pdfAppearanceFront View Rear ViewSpecificationsComputerCPU V2416A-C2Series:Intel®Celeron®Processor1047UE(2M cache,1.40GHz)V2416A-C7Series:Intel®Core™i7-3517UE Processor(4M cache,up to2.80GHz) System Chipset Mobile Intel®HM65Express ChipsetGraphics Controller Intel®HD Graphics4000(integrated)System Memory Pre-installed4GB DDR3System Memory Slot SODIMM DDR3/DDR3L slot x1Supported OS Linux Debian7Windows Embedded Standard7(WS7E)32-bitWindows Embedded Standard7(WS7E)64-bitStorage Slot CFast slot x2Computer InterfaceEthernet Ports Auto-sensing10/100/1000Mbps ports(M12X-coded)x2Serial Ports RS-232/422/485ports x4,software selectable(DB9male)USB2.0USB2.0hosts x1,M12D-coded connectorUSB2.0hosts x2,type-A connectorsAudio Input/Output Line in x1,Line out x1,M12D-codedDigital Input DIs x6Digital Output DOs x2Video Input DVI-I x2,29-pin DVI-D connectors(female)Digital InputsIsolation3k VDCConnector Screw-fastened Euroblock terminalDry Contact On:short to GNDOff:openI/O Mode DISensor Type Dry contactWet Contact(NPN or PNP)Wet Contact(DI to COM)On:10to30VDCOff:0to3VDCDigital OutputsConnector Screw-fastened Euroblock terminalCurrent Rating200mA per channelI/O Type SinkVoltage24to40VDCLED IndicatorsSystem Power x1Storage x1Hot-swappable2LAN2per port(10/100/1000Mbps)Serial2per port(Tx,Rx)Serial InterfaceBaudrate50bps to921.6kbpsFlow Control RTS/CTS,XON/XOFF,ADDC®(automatic data direction control)for RS-485,RTSToggle(RS-232only)Isolation N/AParity None,Even,Odd,Space,MarkData Bits5,6,7,8Stop Bits1,1.5,2Serial SignalsRS-232TxD,RxD,RTS,CTS,DTR,DSR,DCD,GNDRS-422Tx+,Tx-,Rx+,Rx-,GNDRS-485-2w Data+,Data-,GNDRS-485-4w Tx+,Tx-,Rx+,Rx-,GNDPower ParametersInput Voltage12to48VDCPower Connector M12A-coded male connectorPower Consumption(Max.) 3.3A@12VDC0.82A@48VDCPower Consumption40W(max.)Physical CharacteristicsHousing AluminumIP Rating IP30Dimensions(with ears)250x86x154mm(9.84x3.38x6.06in)Dimensions(without ears)275x92x154mm(10.83x3.62x6.06in)Weight4,000g(8.98lb)Installation DIN-rail mounting(optional),Wall mounting(standard) Protection-CT models:PCB conformal coating Environmental LimitsOperating Temperature Standard Models:-25to55°C(-13to131°F)Wide Temp.Models:-40to70°C(-40to158°F) Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsEMC EN55032/24EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:6kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:20V/mIEC61000-4-4EFT:Power:2kV;Signal:2kVIEC61000-4-5Surge:Power:2kVIEC61000-4-6CS:10VIEC61000-4-8PFMFRailway EN50121-4,IEC60571Railway Fire Protection EN45545-2Safety EN60950-1,IEC60950-1Shock IEC60068-2-27,IEC61373,EN50155Vibration IEC60068-2-64,IEC61373,EN50155DeclarationGreen Product RoHS,CRoHS,WEEEMTBFTime332,173hrsStandards Telcordia(Bellcore),GBWarrantyWarranty Period3yearsDetails See /warrantyPackage ContentsDevice1x V2416A Series computerInstallation Kit8x screw,for storage installation2x storage key1x wall-mounting kit8x washer,for HDD/SSDDocumentation1x document and software CD1x quick installation guide1x warranty cardDimensionsOrdering InformationModel Name CPU Memory(Default)OS CFast(CTO)Backup CFast(CTO)Hot-SwappableSSD/HDD Tray(CTO)Operating Temp.ConformalCoatingV2416A-C2Celeron1047UE4GB or optional1(Optional)1(Optional)2(Optional)-25to55°C–V2416A-C2-T Celeron1047UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C–V2416A-C2-CT-T Celeron1047UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C✓V2416A-C7i7-3517UE4GB or optional1(Optional)1(Optional)2(Optional)-25to55°C–V2416A-C7-T i7-3517UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C–V2416A-C7-CT-T i7-3517UE4GB or optional1(Optional)1(Optional)2(Optional)-40to70°C✓V2416A-C2-W7E Celeron1047UE4GB8GB1(Optional)2(Optional)-25to55°C–V2416A-C2-T-W7E Celeron1047UE4GB8GB1(Optional)2(Optional)-40to70°C–V2416A-C7-T-W7E Core i7-3517UE4GB8GB1(Optional)2(Optional)-40to70°C–Accessories(sold separately)Battery KitsRTC Battery Kit Lithium battery with built-in connectorCablesCBL-M12XMM8PRJ45-BK-100-IP67M12-to-RJ45Cat-5E UTP gigabit Ethernet cable,8-pin X-coded male connector,IP67,1mCBL-M12(FF5P)/Open-100IP67A-coded M12-to-5-pin power cable,IP67-rated5-pin female M12connector,1mConnectorsM12A-5PMM-IP685-pin male circular threaded D-coded M12USB connector,IP68M12X-8PMM-IP678-pin male X-coded circular threaded gigabit Ethernet connector,IP67M12A-5P-IP68A-coded screw-in sensor connector,female,IP68,4.05cmM12A-8PMM-IP678-pin male circular threaded A-codes M12connector,IP67-rated(for field-installation)Power AdaptersPWR-24270-DT-S1Power adapter,input voltage90to264VAC,output voltage24V with2.5A DC loadPower CordsPWC-C7AU-2B-183Power cord with Australian(AU)plug,2.5A/250V,1.83mPWC-C7CN-2B-183Power cord with two-prong China(CN)plug,1.83mPWC-C7EU-2B-183Power cord with Continental Europe(EU)plug,2.5A/250V,1.83mPWC-C7UK-2B-183Power cord with United Kingdom(UK)plug,2.5A/250V,1.83mPWC-C7US-2B-183Power cord with United States(US)plug,10A/125V,1.83mAntennasANT-WDB-ANF-0407 2.4/5GHz,omni-directional antenna,4/7dBi,N-type(male)Wall-Mounting KitsV2400Isolated Wall Mount Kit Wall-mounting kit with isolation protection,2wall-mounting brackets,4screwsDIN-Rail Mounting KitsDK-DC50131DIN-rail mounting kit,6screws©Moxa Inc.All rights reserved.Updated Jun12,2019.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
SiAECOSYS V2 IV代 EM系列控制器程序手册说明书
VOTOL EM Controller Program ManualIt is forbidden to non-specialists use!This manual was explained in detail for the IV generation EM series controller,which update download illustrates and parameter adjustment.Before using the software,please read this manual.In order to facilitate the operation,please keep this manual.In order to make the software of maximum utility,please make sure the end user to use this manual.Please be sure to read the manual carefully before starting the operation.Disclaimer:For theⅣgeneration of EM series controller program updates and parameter adjustment can only bedone by professional and technical personnel.If without the written permission of our company for theⅣVOTOL generation EM series,theapplication update to download and parameter of the controller adjustment is not allowed.It is forbidden to non-professional personnel operate this software.In the above event,our company will no longer be responsible for accident happens by controller.1.Software installation(only support win7/10)1.1USB Driver Installation(1)Download the“USB-to-serial-win10-20150814”file,decompressing file.(2)choose the suitable driver with your computer for installation.win7,win8,win10are available.1.11.Decompress the operation first2.Unzip the YH-340USB package and select CH341SER.EXE to install it.Follow the steps above to install(3)After installation,pls.connect the USB cable with controller and computer.If it’s unable to connect,pls.Check below steps.Right click“my computer”in the desktopthen click“device manager”choose“port(COM&LPT)”choose the COM with“!”,click“serach automatically for updated driver software”Close the software when you finishAfter running,please run the software directly:EM_V3series debugging program;If the port has”自2012已停产，请联系供货商处理方法(Pls contact supplier if it is stop production since2012)”First step:Install driver PL2303_Prolific_DriverInstaller_v110Second:Right click to update the driver and select Browse Computer to find the driver software.Thrid:Click to select from the list of drivers for your computer;Select version3.3.10.140(2009-11-19),click Next,close the window when finished;2.Controller connection2.1Connect controllerController host computer simple wiring diagramDescription:controller B+connects battery B+controller B-connects battery B-,controller electric door locks connect battery or controller B+;The USB debug line is connected to the controller debug port;2.1.1According to the controller with CAN or without CAN to select the appropriate USB debug line;with CAN controller need to check the CAN enable,without CAN does not need to check;EM200controller needs to exchange the debug line CAN-H and CAN-L ,otherwise can’t connect the controller;2.1.2Host computer selectionEM50EM100EM150without CAN chooseEM50EM100EM150with CAN chooseEM200chooseSpecific host model needs to inquire the related sales;3Open the computer device manager before connecting to the computer to check whether the USB port is successfullyinstalled.Select the appropriate host computer to connect the host computer to the serial port when the controller is not powered.After selecting the corresponding serial port on the device port,click CreatFile.2.2Then power on(connect with e-lock),click connect(in setting1page),the nominal voltage should not be0.If it’s0,click connect again.3.The settingSetting page11.1：Voltage equipment1.1.1、Battery voltage setting:Corresponding to the ECU voltage,absolutely not allowe overpressure.1.1.2、Lead-acid battery overvoltage,undervoltage,soft undervoltage basic value default:due to software settings defects,the original voltage compensation+1V.1.1.3、The lithium battery is set according to the actual lithium battery parameter value.Due to software setting defects,the original voltage compensation+1V.The original lithium battery parameters are compensated for+1V,and the total compensation is+2V.1.1.4、Attention1.1.4.1、Overvoltage fault:After open the electric door lock,the vehicle doesn’t move.The Controller overvoltage protection function starts.1.1.4.2、ECU undervoltage fault:due to the lithium battery protection board overvoltage device is too high or the undervoltage setting is too low,resulting in lithium battery protection,burning MOS.Please adjust suitable battery voltage before running the motor and controller(for lithium battery).Overvoltage:real overvoltage+3VUndervoltage:real undervoltage+1VSoft undervoltage:undervoltage +3Vg.real overvoltage 84V,set 87V.real undervotlage 60V,set 61V.Soft undervotlage:64V.1.2：Current device1.2.2、Phase current setting:can only be adjusted downwards.1.2.3、Attention1.2.3.1、Setting the busbar current too high,causing the ECU burn MOS.1.2.3.2、As the phase current value decreases,the corresponding motor stall protection time is shortened.Setting page 21throttle voltage adjust(1)low protection value:The throttle error is shown(2)Starting voltage:when the value is reached,the motor starts running(3)End voltage:when the value is reached,the controller thinks the full voltage is reached (it is recommended to set the voltage lower 0.2v compared with thactual torque voltage).(4)High protection value:when the value is higher than that,the torque fault will be displayed2Start setting adjustment (for tricycle gear box only)(1)Starting torque:used for gear combination(2)Combined torque:a force of lifting after gear clearance is combined(3)Upward slope:upward slope of motor torque(4)Downward slope:downward slope of motor torque3Controller and motor temperature protection function adjustment(1)Start:Enter into the function of temperature protection,limit the motor torque.(2)Over temperature:Cut off the output of motor torque(3)Recover:When the motor temperature lower than the temperature protection value,you can re-twist the throttle, then the motor will restore motivation(4)Maximum:The motor maximum temperature is150Setting for page23.1：Parameters setting for sports mode(S gear)3.2.1、Busbar current setting:According to the controller type current corresponding to the selection,the vehicle speed is adjusted according to the motor parameters.BOOST weak magnetic value>high speed weak magnetic value3.2.3、Automatic logout enablers,confirm by select:Check the jog button /uncheck the long press button,choose one3.2.3.1、Check to make the jog effective.The weak magnetic time enters the exit and can be adjusted. 3.2：Downhill electric brake assist：start by select“HDC Enable”,downhill electric brake assist(slow down in steep slopes)function.Enable electric brake by enter minimum speed,if less than the speed,the function will be invalid.3.2.1Value400corresponding to speed around15kmh(it depends on motor feature,sometimes with a3.2.2、Note:The drum motor is not suitable for use,resulting in loose motor shaft.3.3、Flux weakening compensation:only valid when the inner rotor motor type is selected as V-shaped magnetic steelNote:The maximum value of255is generally filled in953.4、Three gear setting：Confirm the motor base speed value adjustment setting parameter value.The basic speed is filled in according to the<Appendix EM_V3Parameter Adjustment Calculation Formula>.3.4.1、The low,medium,high,and third speed values are valid within100%of the parameter value,and the medium,high,and high speed values are exceeded and the100%parameter value is filled.Exceeded by weak magnetic file(medium,high,BOST)3.4.2、In the flux weakening area,the actual parameters of the motor are adjusted,and the vehicle speed is based on the road test.3.4.3、Single voltage mode:The high voltage value is invalid.3.4.4、Attention3.4.4.1、Drum motor:60KM/H motor weak magnetic speed is less than<120%,80KM/H motor weak magnetic speed is less than<125%,110KM/H motor weak magnetic speed is less than<135%.2.4.4.3Inner rotor motor Hall:The built-in Hall weak magnetic speed is less than<135%,and the external Hall weak magnetic speed is less than170%.3.4.4.3、Internal rotor motor magnetic knitting:Built-in flux weakening speed<230%.3.4.4.4The motor base speed exceeds100%of the motor speed value and enters the weak value zone adjustment parameter.BOOST>High speed weak magnetic file.3.4.4.5Weak magnetic failure:The flux weakening value exceeds the motor and controller parameter values,causing the motor to demagnetize and the controller to burn MOS.3.5、Jog/push selection:choose one3.6、The three-speed default gear:the electric door lock opens the default several options.3.7、Soft start setting:The smaller the value,the softer the start.3.8、Speed limit setting:3.8.1、Function selection:speed limit,unlimited speed,two choices,default speed limit3.8.2、The speed limit speed is calculated based on vehicle parameter requirements.<Appendix EM_V3 parameter adjustment calculation formula>3.8.3、The upper limit speed and the solution speed limit are determined according to customer requirements.Setting page33.1、Motor Setting：3.1.1、Motor pole pairs：Fill in according to the motor manufacturer parameters.3.1.2、Hall phase shift angle：Fill in according to the motor manufacturer parameters.3.1.3、Motor type：Fill in according to the motor manufacturer parameters.Note:Wheel Hub motor is surface mount3.1.4、Hall,phase line exchange:exchange the motor forward and reverse.3.2、The controller to speedometer date output has2types:Single-line speedometer and hall speedometer, it needs to be decided by the vehicle’s speedometer.3.3、Moving assist and cruising function：Used in two-wheelersNote:Speed"3KM/H,torque9~19N.M3.4Cruise function:function selection,the default does not open.3.5Dual voltage setting:default single voltage。
Ventis MX4多气体检测器说明书
PUMP UP YOURGAS DETECTION PROGRAMConfigured for your safety, theVentis™ MX4 multi-gas detector takesyour gas detection program to thenext level.■ Detect from one to four gases witha wide range of sensor options■ Draw samples from up to 100 feetwith an optional, integrated samplingpump■ Gain increasedinstrument visibilitywith a safety orangeovermold■Realize true portabilitywithmulti-gas protection insingle-gas size■ Use the extendedrange battery for up to20 hours (without pump)■ Discover a better way to do gasdetection with the Ventis on iNet®Build your Ventis today at/ventisbuilder5.When iNet detects a problem, Industrial Scientific rushes areplacement gas detector to you.4.iNet emails real-time alerts and status reports.3.iNet Control provides visibility into your gas detection programvia the Internet.1.Operators dock gas detectors owned by Industrial Scientific.2.Docking stations perform bump tests, calibrationsand record keeping.HOW GAS DETECTION AS A SERVICE WORKSIMAGINE YOUR PEACE OF MIND... IMAGINE iNETCONFIGURATION OPTIONSVENTIS MX4 INTEGRAL PUMP MA TRIX EXAMPLE : VTSP-0011 - Ventis MX4 Pump, No Bat-VTSP-011VTSP-0011 PUMPBuild and price your Ventis online with the Ventis MX4 instrument builder./ventisbuilderMOST COMMON INSTRUMENT CONFIGURA TIONS PART NO.DESCRIPTIONVTS-K1231100y0z Ventis - LEL, CO, H 2S, O 2, Li-ion, desktop charger, BlackVTS-K1231201y0z Ventis - LEL, CO, H 2S, O 2, Li-ion, desktop charger/datalink, Safety OrangeVTS-K5231300y1z Ventis - LEL, SO 2, H 2S, O 2, Li-ion, auto charger, soft case, Black VTS-K1031301y0z Ventis - LEL, CO, O 2, Li-ion, auto charger, Safety Orange VTS-K1431000y1z Ventis - LEL, CO, NO 2, O 2, Li-ion, no charger, soft case, Black VTS-K1232111y0z Ventis with pump - LEL, CO, H 2S, O 2, Extended Li-ion, desktop charger, Safety OrangeVTS-K1232110y1z Ventis with pump - LEL, CO, H 2S, O 2, Extended Li-ion, desktop charger, soft case, BlackVTS-L1232110y2z Ventis with pump - LEL (methane), CO, H 2S, O 2, Extended Li-ion, desktop charger, hard case with display window, BlackVTS-K5232111y0zVentis with Pump - LEL, SO 2, H 2S, O 2, Extended Li-ion, desktop charger, Safety OrangeVTSP-2011 PUMPORDERING INFORMATIONCONFINED SPACE KITS WITH INTEGRAL PUMP PART NO.VK-K123211xy1z Ventis Confined Space Kit - LEL, CO, H VK-K103211xy1z Ventis Confined Space Kit - LEL, CO, O VK-K023211xy1z Ventis Confined Space Kit - LEL, H2S, O VK-K003211xy1zVentis Confined Space Kit - LEL, O x = Instrument Color: 0 = Black, 1 = Safety Orangey = A gency Certification: 1 = UL/CSA, 2 = ATEX/IECEx, 3 = MSHA, 4 = ANZEx,5 = CHINA EX, 7 = GOST-R/GOST-K, 8 = KOSHA, 9 = INMETRO, A = MED, D = TIIS z = L anguage for included Reference Guide: 1 = EN, 2 = FR, 3 = ES, 4 = DE, 5 = ITA,6 = DUT,7 = PT, 9 = RUS, A = POL, B = CZE, C = CN, D = DAN, E = NOR, F = FIN, G = SWE, J = JPN Ventis Confined Space Kits with Integral Pump Include: Ventis with intergral pump, universal charger, soft carrying case, reference guide, calibration tubing, dustfilter/water stop, calibration fitting, sample tubing, calibration gas (appropriate mix) with regulator, rugged hard plastic case.CONFINED SPACE KITS WITH SLIDE-ON PUMP MA TRIX PART NO.DESCRIPTIONVKVSP4-ABCDEFVentis Confined Space Kit with Ventis Slide-on Pump (LEL, CO, H 2S, O 2)A = LEL Sensor Calibration: K = Pentane, L = MethaneB = Instrument Color: 0 = Black, 1 = Safety OrangeC = Monitor Battery: 1 = Lithium-ion, 2 = Extended Range Lithium-ion, 3 = AlkalineD = Pump Battery: 1 = Lithium-ion, 2 = Extended Range Lithium-ionE = Agency Certification: 1 = UL/CSA, 2 = ATEX/IECEx, 3 = MSHA, 9 = INMETROF = D ocumentation Language: 1 = EN, 2 = FR, 3 = ES, 4 = DE, 5 = ITA, 6 = DUT, 7 = PT, 9 = RUS, A = POL, B = CZE, C = CN, D = DAN, E = NOR, F = FIN,G = SWE Ventis Confined Space Kits with Slide-on Pump Include: Ventis with LEL, CO, H 2S, and O 2 sensors, Ventis Slide-on Pump, 110 VAC desktop charger for each rechargeable instrument ordered (max of 2), calibration cup and tubing with T-fitting, dust filter/water stop, 10 feet of sample tubing, 34 liter cylinder of calibration gas, manual regulator, rug-ged hard plastic carrying caseTHE VENTIS IS PARTICULARLY USEFUL IN THE FOLLOWING INDUSTRIES:■ Chemical ■ Construction■ Electrical / Gas Utilities ■ Fire Service■ Oil and Gas ■ Public Works ■ Steel Production ■ W ater / Waste Water T reatment18108631-00 V·CAL WITH VENTIS INSTRUMENT* (*monitor not included)18108191 VENTIS CHAR GER18108650-06-UNIT CHARGER18108209 CHARGER/DA T ALINK18107763 PRINTER18108652TRUCK-MOUNTCHAR GER , WITH PLUG18108651AUTOMOTIVE CHARGERACCESSORIESPART NO .DESCRIPTION18109327-ABC DSX ™ Docking Station for Ventis ™ MX4A – DSX Mode:0 = DSX Standalone171344871715556417134495171345031714359517148313-117148313-217148313-317148313-41715060818108653 TR UCK-MOUNT CHARGER, HAR D WIR ED18108631-10 V·CAL WITH VENTIS WITHPUMP INSTRUMENT* (*monitor not included)18109327 DSX DOCKING ST A TION WITH VENTIS MX4* (*monitor not included)REV 0715© 2015 Industrial Scientific CorporationINSTRUMENT WARRANTY:Two-year warranty, including sensors and battery CASE MATERIAL:Polycarbonate with protective rubber overmold DIMENSIONS:103 mm x 58 mm x 30 mm (4.1” X 2.3” X 1.2”) - Ventis, lithium-ion battery version172 mm x 67 mm x 66 mm (6.8” X 2.6” X 2.6”) - Ventis with pump, lithium-ion battery version WEIGHT:182 g (6.4 oz) - Ventis, lithium-ion battery version380 g (13.4 oz) - Ventis with pump, lithium-ion battery version OPERATING TEMPERATURE RANGE: -20°C- 50°C (-4°F-122°F)OPERATING HUMIDITY RANGE:15%-95% Non-condensing (continuous)DISPLAY/READOUT:Backlit liquid crystal display (LCD)POWER SOURCE/RUN TIME:Rechargeable lithium-ion battery pack (12 hours typical @ 20ºC) - VentisRechargeable extended-range lithium-ion battery pack (20 hours typical @ 20ºC) - Ventis(12 hours typical @ 20ºC) - Ventis with pump Replaceable AAA alkaline battery pack (8 hours typical @ 20ºC) - Ventis(4 hours typical @ 20ºC) - Ventis with pump ALARMS:Ultra-bright LEDs, loud audible alarm (95 dB at 30 cm) and vibrating alarm SENSORS:Combustible gases/methane - Catalytic diffusion O 2, CO, CO/H 2 low, H 2S, NO 2, SO 2 - Electrochemical MEASURING RANGES: Combustible gases: 0-100% LEL in 1% increments Methane (CH 4): 0-5% of vol. In 0.01% increments Oxygen (O 2): 0-30% of vol. In 0.1% increments Carbon monoxide (CO/H 2 low): 0-1,000 ppm in 1 ppm increments Carbon monoxide (CO): 0-1,000 ppm in 1 ppm increments Hydrogen sulfide (H 2S): 0-500 ppm in 0.1 ppm increments Nitrogen dioxide (NO 2): 0-150 ppm in 0.1 ppm increments Sulfur dioxide (SO 2): 0-150 ppm in 0.1 ppm incrementsCERTIFICATIONS:UL: Class I, Division 1, Groups A B C D, T4; Zone 0, AEx ia IIC T4 Class II, Groups F G (Carbonaceous & Grain dust); IP66; IP67ATEX: Ex ia IIC T4 Ga and Ex ia I Ma; Equipment Group and Category II 1G and I M1; IP66; IP67IECEx: Ex ia IIC T4 Ga; IP66; IP67CSA: Class I, Division 1, Groups A B C D, T4; Ex d ia IIC T4 C22.2 No. 152 for %LEL reading only ANZEx: Ex ia s Zone 0 I/IIC T4; IP66; IP67INMETRO: Ex ia IIC T4 Ga; IP66; IP67KOSHA: Ex d ia IIC T4MSHA: 30 CFR Part 22; Permissible for underground mines; Li-ion versions onlyPA-DEP: Permissible for PA Bituminous Underground Mines CHINA EX: Ex ia d IIC T4 Gb CHINA CMC: Metrology approvalCHINA MA: Approved for underground mines; Alkaline version onlyChina KA: Ex ia d I Mb, diffusion (without pump) Alkaline version only GOST- K: PBExdiaI X / 1ExdiaIICT4 X GOST-R: PBExdiaI X / 1ExdiaIICT4 XMED: Portable Multigas Detector; Category 2 (MED 2012/32/EU); Li-Ion only Charger/Docking Station accessories; category 1SANS-1515: SANS 1515-1; Type A; Ex ia I/IIC T4 IP66/67; Li-Ion only TIIS: Ex ia IIC T4 X SUPPLIED WITH MONITOR:Calibration Cup (Ventis), Sample Tubing (Ventis with pump), Ventis MX4 Reference GuideREFERENCE GUIDE LANGUAGE:English (1), French (2), Spanish (3), German (4), Italian (5), Dutch (6), Portuguese (7), Russian (9), Polish (A), Czech (B), Chinese (C), Danish (D), Norwegian (E), Finnish (F), Swedish (G), Japanese (J)* These specifications are based on performance averages and may vary by instrument.SPECIFICATIONS*ASIA PACIFICPhone: +65-6561-7377 Fax: +65-6561-7787**************.comAMERICASPhone: +1-412-788-4353 | Fax: +1-412-788-8353 1-800-DETECTS (338-3287) North America***************EMEAPhone:+33 (0)1 57 32 92 61Fax: +33 (0)1 57 32 92 67**************.com。
奥斯卡作用域OX 9000系列4合1仪器作用域多功能仪表分析仪记录器安全说明书
Our products are backed by over 125 years of experience in test and measurement equipment, and encompass the latest international standards for quality and safety.OscilloscopeOX 9000 SERIES4-in-1 InstrumentOscilloscope Multimeter AnalyzerLogger Safety•All channels isolated from one another and from the earth, 600V CAT IIIErgonomic•Modern, high tech design which is simple, compact and practicalOptimization•of all tools; communication, storage and operationisolated channelswith the recorded files directly viewable on screen2 Technical Assistance (800) 343-1391ERGONOMICSOriginalIn a housing tailor-made to be as compact as possible, the mechanical design makes it possible to integrate the hardware components in a small size with the keypad benefits from new technology developed inthe automotive industry.Scope in carrying case with shoulder strap, set of two 5 ft color-coded leads, alligator clips and test probes, 10 ft USB cable, µSD memory card, 1-PROBIX Banana Plug Adapter, 1 stylipen, LI-ION 5.8 Ah battery pack, PA40W-2 power adapter with 110V power cord. Additionalaccessories may be model dependent.Designed to simplify use with one button access to most functionsCHANNEL AND PARAMETER IDENTIFICATIONEach channel and related parameters are identified with identical color against a black background for simpler, quicker viewing.EASY ACCESS VIA TOUCH SCREENIntuitive icons are provided to facilitate their use, even with gloves on.ADJUSTABLE STRAPThis helps to optimize operation of the oscilloscope in your hand or on your shoulder when working in the field.A stand is also available to vary the orientation of the oscilloscope when it is placed on a bench. The oscilloscope can be safely left unattended using the Kensington locking system.NEW KEYPAD DESIGN FOR OPTIMUM USER COMFORTConfiguration and measurement displays are simple to access from the front panel in one of these 5 specific areas: Utilities (brightness, full screen, screenshot), Measurements, Vertical, Horizontal, Trigger.LINE POWER OR LI-ION BATTERYPort on left side.Technical Assistance (800) 343-1391 3APPLICATIONSElectronic maintenanceThe OX 9304 model is ideal for electronics with its300 MHz bandwidth, 4 x 600V CAT III isolated channels, advanced trigger functions, integrated FFT function,complex mathematical calculations on the curves, automatic measurements on 4 channels and the built-in WEB server.Industrial maintenanceThe OX 9304’s large 7-inch screen, 300 MHz bandwidth, 4 x 600V CAT III isolated channels and Harmonic Analyzer and Multimeter modes make it ideal for industrial maintenance applications.Ideal for electronic and industrial maintenanceIP54Housing protected against dust and water spray.DIRECT ACCESS ZOOM BUTTON7" WVGA WIDE COLOR TFT TOUCH SCREENMakes it easy to view and read the measurements clearly.It also provides a screen resolution of 800 x 480 dpi with manual or automatic brightness.TOUCH-SCREEN STYLUS STORAGEAmong the essential tools available, the sylus is equipped with a hook for the addition of a cord to make it captive, as required. One end is slightly flattened to prevent rolling when placed on a table or bench.COMMUNICATION INTERFACESThese are isolated from one another and from the measurement channels. A dedicated compartment on the right side protected by a flexible cover contains all the different communication interface ports:• USB host for communication with a PC• wired RJ45 or WiFi for communication with a PC or printing via a network printer• µSD card for data storage with quick transfer and forupgrading of the instrument's firmware AUTOSET BUTTONDIRECT SETTING AND SET-UP BUTTONS Quickly and effortlessly adjusts the horizontal and vertical; sensitivity and scales to provide the best resolution.Channels are isolated.4 Technical Assistance (800) 343-1391ACCESSORIESOSCILLOSCOPE OX 9000 SERIESThe plug and play accessories included areautomatically recognized when connected to the oscilloscope. They provide quick and easyimplementation with total user safety. Additionally, accessories equipped with BNC connectors orstandard banana plugs can also be connected when using the supplied adapter.Interchangeable ID Markers can be used on theaccessories plugged into a given channel to identify them with the trace color displayed on the screen.Additionally the 10:1 probe accessory is equipped with3 adjustable buttons to optimize its measurement capabilities.voltage measurements• by probe with different bandwidths and attenuation• by BNC or banana jack connection current measurements• by AC or AC/DC current clamp • directly through banana jack connections temperature measurements• using a K thermocouple sensor • using a PT100 RTD sensorAccessories & ReplacementsCat #2124.73 - PROBIX PRHX1 10:1 Probe, 250MHz 600V CAT III Cat #2124.77 - PROBIX Current Probe, 20mA-20A 1MHz-3dB Cat #5000.17 - Set of 5 styli pensOnce one of the provided standard accessories has been plugged in, it is automatically identified and itscharacteristics and calibration references are retrieved by the OX9000 Series Oscilloscope. All accessories are directly powered by the oscilloscope.Sensor coefficients scales and units of measure are managed automatically, as is channel configuration. Control buttons on the probes can be used to modify the settings of the channels to which they are connected. They also offer functions accessible on the oscilloscope's front panel.Accessories automatically recognized when connected to the oscilloscopeIdentification and Safety ManagementChannel Configuration and Sensor ManagementPROBE FUNCTIONSTechnical Assistance (800) 343-1391 5COMMUNICATIONChoice of communication interfaces―you can choose the type of communicaton to fit your requirements.Several communication choices are built into the OX9000 Series oscilloscope.• Wired Ethernet LAN network with integrated DHCP server for easy connection to your network• WiFi ® radio link to communicate with a PC, tablet or smartphone using the dedicated interfaces• USB for interfacing with the PC; record, recall or load configurations• µSD with >8 GB, default storage giving priority over the 1 GB internal memoryFile ManagementAny of the signal traces can be displayed instantaneously as the reference by pressing a single button which will obtain a comparison an immediate measurements of the deviation of ongoing measurements.Backups are available in various formats for direct export into a standard application such as Windows base spreadsheets or word processors.It is easy to take screenshots directly from the front panel and save them in a .PNG format, print documents on a network printer and transfer or delete files in the file manager.Data Processing• Use the oscilloscope screen to recall screenshots and stored traces for direct review on screen• On your PC, use the ScopeNet application in your web browser with either the USB or Ethernet connection for remote control and programming with SCPI commandsElectrical TroubleshootingEducationIn the laboratoryFor added equipment and operator safety all communication from theinstrument is totally isolated from the measurement process6 Technical Assistance (800) 343-1391Improved functions and performance levels of the OX9000 Series4 MODES: Oscilloscope, Multimeter, Analyzer, RecorderTrigger FunctionsAn oscilloscope with complex trigger functionsrecords what is necessary, while capturing all the faults The OX9000 models offer advanced triggers whichcomplement the main edge trigger options: pulse width, counting and delay.• The Delay mode enables you to observe any event with maximum resolution, even if it occurs a long time after effective triggering, or on two different channels.• The Counting mode enables you to count theevents before triggering, so that you can check the content of digital frames. For example, the trigger can be linked to a second “auxiliary” signal which is different from the “main” signal.Automatic MeasurementsComprehensive automatic measurements are displayed with cursors for precise analysis. The automaticmeasurements window displays all 20 parameters at the touch of a button for 4 channels. Two horizontal and vertical cursors can be used to view the section of the signal where the first automatic measurement was performed.A specific measurement area can then be selected by framing it with manual cursors for more accurate, reliable results.Direct comparison of two traces can be performed by checking the “reference memory deviation” box, so that these 20 signal parameters are displayed in terms of deviations.• wider bandwidth up to 300 MHz• new triggering and recording options • increased storage capacity, and more!• 12 bit resolution • 2.5 GS/secOSCILLOSCOPE:VIEW ALL 4 CHANNELS SIMULTANEOUSLY waveform + FFTwaveform + XY waveform + zoomThe Math FunctionsIn oscilloscope mode, the MATH functions (1, 2, 3 and 4) allow you to define a mathematical function for each of the traces, along with vertical scaling and labeling of the actual physical unit.The mathematical editor is capable of displaying 4 calculated traces on which all the automatic or cursor measurements remain available. This means it ispossible to examine the waveforms, such as the power (V x I), and perform all the associated measurements.A large number of operators are available, including +, -, x and / , as well as more complex operators such as sine, cosine, exponential, logarithm, square root, etc.opening the way for specific applications.Real-time Fast Fourier Transform (FFT) for frequency decomposition of your signals on 4 channelsThe FFT is used to calculate, from 2500 pointsupwards, the discrete representation of a signal in the frequency domain from its representation in the time domain. It is often particularly useful for arriving at an effective diagnosis during qualitative analysis of the signals:• measurement of the individual harmonics or distortion of a signal• analysis of a pulse response• search for the source of noise in the logic circuits Several weighting windows are available, as well as 2 representation modes: linear or logarithmic (scale in dB). The 2 cursors can then be used for precise measurements of the frequency lines, the levels and the attenuations, taking advantage of the 80 dB dynamic range allowed by the 12-bit / 2.5 GS/s conversion.The autoset button makes it easier to obtain anoptimum spectral representation to which a graphical zoom can be applied to analyze all the details of the spectrum.Technical Assistance (800) 343-1391 74 MODES: Oscilloscope, Multimeter, Analyzer, RecorderHarmonics4 Simultaneous ChannelsHarmonic AnalysisHarmonic analysis is performed on all 4 channels up to the 63rd order to comply with the requirements of the EN 50160 standard (THD on harmonics up to the 50th), with a fundamental frequency between 40 and 450 Hz.It is possible to preselect the frequency of the fundamental for the standards (50 Hz, 60 Hz and 400 Hz).This function helps to improve analytical performance and, above all, measurement when the level of a harmonic order is greater than the fundamental.It is possible to view the harmonic analyses of two or four channels simultaneously: RMS level, harmonic distortion, harmonic frequency, phase of the harmonic in relation to the fundamental.MultimeterBy simply selecting the dedicated icons, you can gain access to the multimeter mode without changing the measurement input channels. The OX9000 models offer an 8,000-count TRMS digital multimeter with two or four channels which can perform the following measurements:• amplitude (DC or AC voltage and current, power, temperature, etc.)• resistance, continuity, capacitance • component diode testsTemperature is measured using the Pt 100 and Pt 1000 sensors or K thermocouples via the dedicated PROBIXsensors. The power measurements are proposed as follows with choice of the configuration:• single-phase power• three-phase power on balanced network without neutral Measurement between H and V cursors:T1, T2, Dt, 1/Dt, V1, V2, dV, Ph• three-phase power on balanced network with neutral • 3-wire three-phase power (2-wattmeters method)Recorder/loggerThis is the mode for recording the trends in Multimeter mode. A genuine fast digital logger is provided inside the instrument to monitor the variations of physical or mechanical phenomena over time. It offers acquisition intervals as short as 40µs between 2 measurements and recording can cover any period from 2 seconds to one month.The four modes are directly accessed at the press of a button or touchscreen icon providing instant access the mode you needChauvin Arnoux ®, Inc. d.b.a AEMC ® Instruments • 15 Faraday Dr. • Dover, NH 03820 USA • (800) 343-1391 • (508) 698-2115 • Fax (508) 698-2118E-mail:**************| Export Department: +1 (603) 749-6434 x520 • Fax +1 (603) 740-7550 •E-mail:***************950.BR-OX9000Series_1021 • Printed in the USA© 2021 Chauvin Arnoux ®, Inc. d.b.a. AEMC® Instruments Call the AEMC ® Instruments Technical Assistance Hotline for immediate consultation with an applications engineer: (800) 343-1391 (Ext. 351)。
Gen-Z 内部I O连接器 Sliver 电子产品说明书
2344604-1TE Sliver, Internal I/O Connectors, Sliver for SFF-TA-1002, PCB Edge Card, Vertical, Cable-to-Board, Gen-Z, 2 Row, Through Hole - Solder04/28/2022 11:10PM | Page 1For support call+1 800 522 6752Connectors > PCB Connectors >Internal I/O ConnectorsIndustry Standard:Gen-ZConnector System:Cable-to-BoardPCB Mount Orientation:VerticalConnector Mates With:PCB Edge CardInternal I/O Connector Type:Sliver for SFF-TA-1002FeaturesProduct Type Features Internal I/O Connector Type Sliver for SFF-TA-1002Connector Mates With PCB Edge Card Connector System Cable-to-Board Shell Without SealableNoConnector & Contact Terminates To Printed Circuit BoardConfiguration Features Board-to-Board Configuration Co-Planar PCB Mount Orientation Vertical Number of Rows 2Contact FeaturesContact Mating Area Plating Material Gold Contact Underplating MaterialNickel PCB Contact Termination Area Plating MaterialTinContact Base Material Copper Alloy2344604-1 ACTIVESliver TE Internal #:2344604-1TE Sliver, Internal I/O Connectors, Sliver for SFF-TA-1002, PCBEdge Card, Vertical, Cable-to-Board, Gen-Z, 2 Row, Through Hole - SolderView on >TE Sliver|PCB Contact Termination Area Plating Material TinContact Base Material Copper AlloyContact Current Rating (Max)55 AContact Mating Area Plating Material Thickness.381 µm[15 µin]Termination FeaturesTermination Method to Printed Circuit Board Through Hole - SolderMechanical AttachmentConnector Mounting Type Board MountUsage ConditionsOperating Temperature Range-55 – 85 °C[-67 – 185 °F]Operation/ApplicationCircuit Application PowerIndustry StandardsIndustry Standard Gen-ZProduct ComplianceFor compliance documentation, visit the product page on >EU RoHS Directive 2011/65/EU CompliantEU ELV Directive 2000/53/EC CompliantChina RoHS 2 Directive MIIT Order No 32, 2016No Restricted Materials Above ThresholdEU REACH Regulation (EC) No. 1907/2006Current ECHA Candidate List: JAN 2022(223)Candidate List Declared Against: JAN 2022(223)Does not contain REACH SVHCHalogen Content Low Halogen - Br, Cl, F, I < 900 ppm perhomogenous material. Also BFR/CFR/PVCFreeSolder Process Capability Not reviewed for solder process capabilityProduct Compliance DisclaimerThis information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledgebased on the information they provided. This information is subject to change. The part numbers that TE has identified asEU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalentchromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to theselimits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment productswill be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the partnumbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenousmaterials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limitsas defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provideson SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on04/28/2022 11:10PM | Page 2 For support call+1 800 522 675204/28/2022 11:10PM | Page 3For support call+1 800 522 6752on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance onrequirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-on-reachTE Part #2-2199155-8DDR4 DIMM 288 Pin SMT typeTE Part #2-2199155-7DDR4 DIMM 288 Pin SMT typeTE Part #4-338088-38/8 INV.MOD.JACKTE Part #2-2330552-2ICX POINT PHM CARRIER ASSY, P4TE Part #2305234-1SOCKET P HARDWARE DUST COVERTE Part #2-2330553-1SOCKET P4/P5 DUST COVER, LGA4189TE Part #2-2330550-1SOCKET P4 BOLSTER PLATE ASSY, W /O COVERTE Part #5-146132-103 MODII HDR SR SFMNT B/A .100TE Part #2299806-1NRW NON-FABRIC CARRIER, SOCKET P0TE Part #2299804-3NRW NON-FABRIC BOLSTER,P0, W /O COVERInternal I/O Connectors(26)Internal I/O Cable Assemblies(53)Card Guide Hardware(1) Also in the Series TE SliverCustomers Also BoughtDocumentsCAD Files3D PDF3DCustomer View Model3DCustomer View ModelENG_CVM_CVM_2344604-1_1.2d_dxf.zipEnglishCustomer View ModelENG_CVM_CVM_2344604-1_1.3d_igs.zipEnglishCustomer View ModelENG_CVM_CVM_2344604-1_1.3d_stp.zipEnglishBy downloading the CAD file I accept and agree to the of use.Terms and ConditionsDatasheets & Catalog PagesInternal Cabled Interconnects Solutions GuideEnglishSliver Internal Cabled Interconnect Solutions Brochure (Chinese)Product SpecificationsApplication SpecificationEnglishProduct Environmental ComplianceProduct ComplianceEnglishProduct ComplianceEnglish04/28/2022 11:10PM | Page 4 For support call+1 800 522 6752。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
UNIVERSITY OF CALIFORNIA
College of Engineering
Department of Electrical Engineering and Computer Sciences
Jan M. Rabaey Homework #4 EECS 141
Due Monday, February 23, 5pm, box in 240 Cory
1.Given the RC network below:
Figure 1 RC network.
(1)Calculate the Elmore delay from In to Out1 and from In to Out2. Which one is critical
path? (10 pts)
(2)Assume R = 100Ω and C = 10fF. Calculate the Elmore delay of the critical path you find
in part (1) and verify the result using Spectre. (10 pts)
Solution:
(1)From In to Out1:
From In to Out2:
The path from In to Out2 is critical path
(2)From In to Out1:
From In to Out1:
From the simulation results,,
2.In the following problem, we will calculate the delay of a NAND2 gate by using two
approaches we have learned, logical effort and Elmore delay. The NMOS and PMOS can be modeled as a RC network shown below when the transistor is “ON”. When the transistor is “OFF”, we use the same model except now the transistor has an infinite off-resistance.
Assume .
Figure 2 A NAND2 gate and NMOS and PMOS transistor models.
(1)Calculate the T pLH and T pHL of a NAND2 gate shown above using logical effort. (5 pts)
(2)Calculate the T pLH and T pHL of a NAND2 gate shown above using Elmore delay. Do you
get different answers in delay between part (1) and (2)? Briefly explain why there is or
isn’t difference. (15 pts)
Solution:
(1)
(2)
We get different T pHL results between part (1) and (2) because the delay calculation using logical effort ignores the internal node capacitances.。