UXB02070H4TCu00中文资料

USB2.0 HUB 控制器集成电路 USB 2.0 HIGH SPEED 4-PORT HUB C

USB2.0 HUB控制器集成电路USB 2.0 HIGH SPEED 4-PORT HUB CONTROLLERSL2.1S数据手册Data SheetCoreChips ShenZhen CO.,Ltd内容目录第一章管脚分配 (3)1.1 SL2.1S管脚图 (3)1.2 SL2.1S管脚定义 (4)第二章功能叙述 (5)2.1综述 (5)2.2充电支持 (5)第三章电气特性 (5)3.1极限工作条件 (5)3.2工作范围 (6)3.3直流电特性 (6)3.4HS/FS/LS电气特性 (6)3.5ESD特性 (6)附录一封装 (7)表格目录表格1: 最大额定值 (5)表格2: 工作范围 (6)表格3: 直流电特性 (7)插图目录图1：SL2.1S 管脚图 (3)图 2：附录封装图 ................................................................................... .7SL2.1S 管脚图第一章管脚分配图 1：SL2.1S 管脚图SL2.1S管脚定义管脚名称16Die IO类型定义Pin#DM2 1 B 下行口2的USB DM信号DP2 2 B 下行口2的USB DP信号DM1 3 B 下行口1的USB DM信号DP1 4 B 下行口1的USB DP信号UDM 5 B 上行口的USB DM信号UDP 6 B 上行口的USB DP信号VDD5 7 P 5v输入VSS 8 P 芯片地VDD33 9 P 内部3.3vVDD18 10 P 内部1.8vXOUT 11 O 晶振输出XIN 12 I 晶振输入DM4 13 P 下行口4的USB DM信号DP4 14 P 下行口4的USB DM信号DM3 15 B 下行口3的USB DM信号DP3 16 B 下行口3的USB DP信号注释：O，输出；I 输入；B 双向；P 电源/接地；第二章功能叙述2.1综述SL2.1S 是一颗高集成度,高性能,低功耗的USB2.0集线器主控芯片；该芯片采用STT 技术,单电源供电方式，芯片供电电压为5v , 内部集成5V 转3.3V,只需在外部电源添加滤波电容；芯片自带复位电路，低功耗技术让他更加出众。

柔性检查作用域套件-USB 产品说明书

lInstructions for Use: Flexible Inspection Scope Kit-USB Brand Name of ProductFlexible Inspection Scope Kit - USB Generic Name of ProductFlexible Inspection Scope Kit - USB Product Code Number(s)FIS-007U, FIS-007USK, FIS-007UB, CT-101, CT-102Intended UseFor visually inspecting items.Range of Applications for ProductEnhance visual inspection by providing lighted magnification, image capture and the option for documentation in hard-to-see crevices, channels, and lumens in areas of instruments that are not visible to the unaided eye.Key Specifications of Product Flexible Inspection Scope- FIS-007U∙CT-101 1.90 mm OD and 110 cm length∙CT-102 1.06 mm OD and 110 cm length∙Opticalo Resolution format:o CT-102 1.06 mm: 40,000 pixels (or 200- x 200 pixels)o CT-101 1.90 mm: 160,000 pixels (or 400- x 400 pixels)o Field of View: 120° in airo Angle of view: 0°USB Control Module: Control Module housing Camera processor and LEDillumination:∙Dimensions: 5.25- x 3.90- x 1.85 inches∙Weight: 1.20 pounds ∙Digital Inspection Scope Connection∙Illumination Control- LED in the Control Module∙Power Cycle∙USB Camera Cable∙Easily change from small and large diameter scopes.Light Settings:There are four light settings operated by one button.Blinking Light (Indicates transmitting video data):∙Splash proof (IPX5 Rating)∙No external power needed.Flexible Inspection Scope Software Requirements:∙Compatible with Windows 10 Operating systems.∙USB flash drive includes software.Unpacking Flexible Inspection Scope:Carefully inspect for shipping damage. If there is any damage contact the shipping carrier and Heatlhmarkcustomer service 800-521-6224 immediately.USB Control Module: (Fig. 1).1.Digital Inspection Scope Connection 2.Illumination Control 3.Power Cycle B (Type C) on the right side of the boxFigure 1Flexible Inspection Scope™: (Fig. 2).∙CT-101 1.90 mm O.D. and 110 cm length ∙CT-102 1.06 mm O.D. and 110 cm lengthLarge1.90 mmSmall 1.06 mmFigure 2Flexible Inspection Scope™ Features3214Light/Illumination Settings: (Fig. 3).∙Five (5) light settingso Light on control indicats setting levelo Fifth setting is OFF∙Press light button to advance to next setting.∙Fifth setting turns the light OFF.Figure 3Power Cycle ButtonPress button to RESET camera (Fig. 4).Figure 41.Flexible Inspection Scope™ Plug (Fig. 5).Contains camera video connection as well as LED Light for illumination.1Figure 52.Flexible Working Length (Fig. 6).The portion of the Flexible Inspection Scope™ that is inserted into an item during visual inspection.The measuring scale markings on the Flexible Working Length are in centimeters (accuracy = ± 0.5 cm)2Figure 63.Distal Camera (Fig. 7).Distal portion of Flexible Inspection Scope™ that contains the camera lens3Figure 7SOFTWARE INSTALLATION:Note: This section is done only once when connecting the scope to the computer for the first time.∙System Requirements: MS Windows 10∙Install the Flexible Inspection Scope™ Software from the USB flash drive on a computer.Note: If you have any IT policies that may block this installation, please contact your IT team to give access to Healthmark scope viewer to install.1. Insert the USB Flash drive into your computer, and double click on the Healthmark Scope Viewer installer package to begin installation.2. The “Welcome to the Healthmark Scope Viewer Setup Wizard” screen pops up. Click on Next.3. Select the first tab Typical or setup type of your choice, click Next.4. Click Install and wait for installation to complete.5. Click Finish.STARTING SOFTWARE & CONNECTING SCOPE TO PC:(Fig 8).1.Open the Windows PC viewer software.2.Connect the Control Module to PC using USB Cable.3.Plug the Flexible Inspection Scope into the Control Module.4.In the viewer software, click Settings and Select USB Video Device, click on the desiredresolution, select the preferred Video Output Format, and then Click OK.5.Press the Power Cycle Button.Figure 86.Now you can start using the scope.Verifing OperationFollowing the steps listed below will ensure the proper use and performance of the Flexible Inspection Scope™. The Flexile Inspection Scope™ can be checked for normal operation by connecting it as described in the Startup section of this IFU.Normal operation includes:∙An image appearing on your computer monitor or HDMI Monitor.∙ A blinking light on Control Module near the Power Cycle button that indicates the image feed is transmitting.∙White light emitting from the distal end of the Digital Inspection Scope.∙An LED light on the control module top panel that indicates the light intensity of the device. Using SoftwareHealthmark Scope Viewer Software (Fig. 9).1.Capture button: Captures a Reference Image and saves it to the Reference Image folder.2.Main Image Window: Displays the image from the camera.3.Reference Image Window: Displays a reference image.4.Clear Button: Removes the image from the Reference image window.5.Open Reference Image button: Allows selection of a reference image from the Reference Imagefolder.6.Settings Button: Click to select the video camera and resolution settings.7.File Location Button: Click to change location where captured images are being saved.8.File Location Window: Shows the file path where captured images are being saved currently.9.Capture Image Button: Captures images and adds them to the File Location selected by the user(as shown in the File Location Window).10.Capture Video button: Click to record video. Click again to stop recording video.11.File Prefix: Type in text that you would like included in the file name of Captured Images.Figure 9Selecting Video Device or CameraFollow the directions below to select the video device or camera used to capture images using the Flexible Inspection Scope™ Viewer Software. (Fig. 10).1.Click Settings button in the lower left of the Scope Viewer software to display a list of videodevices or cameras being detected by your computer2.Select a device for capturing images using the Scope Viewera.The example below shows a webcam and USB Video Device in the Settings box. Select theUSB Video Device for the Flexible Inspection Scope™.b.You can also select your preferred Video Output Format from the dropdown box3.Click OK to view the selected Video Device.231Figure 10Capturing Still PicturesFollow the instructions for capturing still pictures from the Main Image Window.Select the Capture Image button. (Fig. 11).Figure 11Note: When an image is captured, “Image Captured” in red text will flash on the lower portion of the screen and a new file will appear in the Files Location.Capturing Video ImagesFollow the instructions below for capturing video from the Main Image Window.1.Select the Capture Video Button (Fig. 12).Figure 122.When the video is recording “Recording…” in red text will appear toward the bottom of thesoftware window.3.To stop recording, click Stop Capture. (Fig. 13).Figure 13Setting File PrefixFollowing the steps below allows you to create a file prefix that will appear after the underscore of image file names save to the File Location specified by the user.1.Click in the field next to File Prefix.2.Enter the characters that you would like to be included in the file name. (Fig 14).Figure 14Setting Location for Saved FilesFollowing the steps below allows you to set the file location of saved images using the Scope Viewer software.1.Click the File Location button.2.Select the file location you want to save captured images. (Fig 15).Figure 15Displaying Reference ImageThere are two ways to display a still image in the Reference Image Window on the Scope Viewer software.1.To display an image currently being displayed in the Main Image Window, click the Capture button. Note: The images will be saved in a file folder titled Reference Images in the designated File Location that the user specified in the File Location field. (Fig. 16).Figure 162.To display a saved image in the Reference Image Window from your File Location:a.Click the Open Reference Image button (Fig. 16 above).b.Select the file you want to display (Fig. 17 below).c.Click the OK Button, to display the image in the Reference Image Window. (Fig. 17).Figure 17Switching to a Different Flexible Inspection Scope™ on the Control Module:1.Press the Power button on the Control Module once.2.Disconnect the current Flexible Inspection Scope from the Control Module.3.Repeat the steps in the “STARTING SOFTWARE & CONNECTING SCOPE TO PC” procedure.Inserting Scope in ItemFigure 1Rotating Device to Avoid ObstacleFigure 2 Performing InspectionWipe down the Flexible Inspection Scope™ with a compatible wipe. Follow the manufacturer’s (Mfr.’s)Instructions for Use (IFU) for appropriate wipe usage. Click here to see the Chemical Compatibility Chart(PDF) for approved cleaning.The Flexible Inspection Scope™ is made of the same material as other common endoscopes. Any wipe,solution, or low temperature (≤ 60 °C [140 °F]) method intended for the reprocessing of endoscopes is likelycompatible with the Generation II Flexible Inspection Scope™ Catheters if used according to the productlabeling.Solutions Containing (Flexible Inspection Scope Only)Alcohol Ethoxylates Neutral or Near-Neutral pH DetergentsEnzymatic Cleaning Solutions Enzymatic DetergentsSodium Borated, Decahydrate Tetrapotassium PyrophosphateFlexible Inspection Scope™ has a fluid ingress protection rating of IPX7 (Waterproof) and can withstandimmersion in fluid up to one (1)-meter in depth for up to 30 minutes.Control Module USB has a fluid ingress protection rating of IPX5 (Water resistant) and can withstand asustained, low pressure water jet spray for up to three minutes.For Thorough Cleaning: CablesFollow the cleaning agent Mfr.’s IFU.1.Unplug and disconnect all components from the Control box prior to cleaning.2.Do not submerge or soak the cable for disinfection (cable is not waterproof).3.Wipe thoroughly with non-linting wipe moistened with facility approved neutral detergent. Use theappropriate brushes with detergent solution to remove any residues from areas that cannot bereached with the wipes.For Thorough Cleaning: Control Module1.Unplug and disconnect all components from the Control box prior to cleaning.2.Do not submerge or soak the cable for disinfection (Control Box is not waterproof).3.Wipe thoroughly with non-linting wipe moistened with facility approved neutral detergent. Use theappropriate brushes with detergent solution to remove any residues from areas that cannot bereached with the wipes.Note: Do NOT soak. Control Module and cables are not waterproof and should not be immersed.N/ACleaning –AutomatedDisinfection Control Module and CablesThese may be cleaned with alcohol based disinfectant wipes.Compatible agents (wipes and solutions) for disinfecting Flexible Inspection Scope™ and ControlModule:∙Hydrogen peroxide∙Isopropyl alcohol (IPA)∙Sodium hypochlorite (Bleach)∙Ortho-phenylphenol∙Quaternary ammonium.High-Level Disinfection (Flexible Inspection Scope™ Only)∙Select only disinfecting solutions listed in the compatible disinfecting methods.∙Follow all recommendations regarding health-hazards, dispensing, measuring, and storage from the Mfr. of cleaning and disinfecting agents.∙Soak the Flexible Inspection Scope™ in selected disinfecting solution per Mfr.’s IFU.∙Rinse the Flexible Inspection Scope™ with critical (sterile) water, again, following the disinfecting solutions Mfr.’s instructions.Reprocessing Chemical Compatibility Chart (PDF): Click here.。

29400资料

PRELIMINARY
(February, 2001, Version 0.1)
1
AMIC Technology, Inc.
元器件交易Hale Waihona Puke
A29400 Series
The host system can detect whether a program or erase operation is complete by reading the I/O7 ( Data Polling) and I/O6 (toggle) status bits. After a program or erase cycle has been completed, the device is ready to read array data or accept another command. The sector erase architecture allows memory sectors to be erased and reprogrammed without affecting the data contents of other sectors. The A29400 is fully erased when shipped from the factory. The hardware sector protection feature disables operations for both program and erase in any combination of the sectors of memory. This can be achieved via programming equipment. The Erase Suspend feature enables the user to put erase on hold for any period of time to read data from, or program data to, any other sector that is not selected for erasure. True background erase can thus be achieved. Power consumption is greatly reduced when the device is placed in the standby mode. The hardware RESET pin terminates any operation in progress and resets the internal state machine to reading array data.

TA102系列双USB充电端口商品说明书

Installation Manual and Operating InstructionsTA102 SeriesDual USB Charging PortTrue Blue Power® a division ofMid-Continent Instrument Co., Inc.Mid-Continent Instrument Co., Inc.dba Mid-Continent Instruments and Avionics9400 E. 34th Street N.Wichita, KS 67226 Manual number 9017942FOREWORDThis manual provides information intended for use by persons who, in accordance with current regulatory requirements, are qualified to install this equipment. If further information is required, please contact:True Blue Powerc/o Mid-Continent Instrument Co., Inc.Attn: Customer Service Dept.9400 E. 34th Street N.Wichita, KS 67226 USAPH (316) 630-0101FX (316) 630-0723We welcome your comments concerning this manual. Although every effort has been made to keep it free of errors, some may occur. When reporting a specific problem, please describe it briefly and include the manual part number, the paragraph/figure/table reference and the page number. Send your comments to:True Blue Powerc/o Mid-Continent Instrument Co., Inc.Attn: Technical Publications9400 E. 34th Street N.Wichita, KS 67226 USAPH (316) 630-0101FX (316) 630-0723All products produced by Mid-Continent Instrument, Co., Inc., including those identified as Mid-Continent Instruments and Avionics or True Blue Power, are designed and manufactured in Wichita, KS, USA.©Copyright 2017Mid-Continent Instrument Co., Inc.REVISION HISTORYRev. Date Approved Detailrelease.A 04/19/13 BAW InitialB 05/30/13 BMC Updates driven by internal review.C 08/22/13 TKV Added Circular Rear Mount option and kit details, addedconfigurations -2, -3, and -4.D 11/1/13 TKV Added two additional pins to installation kit and informationregarding a recommended crimp tool.E 11/14/13 TKV Added information about adhesive for Front Mount Kit.Added information about ETSO certification.F 06/10/14 TKV Changed information about mounting screws. (PT+0.285”was PT+0.312”)G 02/26/15 TKV Added Modification Information, Added Mod 1H 09/12/16 CAS Changed the weight in ‘1.2.2 Physical Attributes’ to 0.13pounds.J 01/04/17 BAW Updated to include new mounting option. Added 1.2.4.TABLE OF CONTENTS SECTION 1 GENERAL DESCRIPTION1.1 INTRODUCTIONSPECIFICATIONS1.2 TECHNICAL1.2.1 ELECTRICAL ATTRIBUTES1.2.2 PHYSICAL ATTRIBUTES1.2.3 QUALIFICATIONS1.2.4 CONFIGURATIONSSECTION 2 PRE-INSTALLATION CONSIDERATIONS2.1 COOLINGLOCATION2.2 EQUIPMENTCABLES2.3 ROUTINGOF2.4 LIMITATIONS2.5 MODIFICATIONSSECTION 3 INSTALLATION PROCEDURESINFORMATION3.1 GENERAL3.2 UNPACKING AND INSPECTINGHARNESS3.3 CABLE3.3.1 WIRE GAUGE SELECTION3.3.2 PIN ASSIGNMENT INFORMATION3.3.3 HARNESS VERIFICATION3.4 MOUNTINGCOMPLETION3.5 INSTALLATIONSECTION 4 OPERATION4.1 ELECTRICALPERFORMANCEFEATURES4.2 PROTECTIVE4.2.1 SHORT CIRCUIT PROTECTION4.2.2 OVER-CURRENT PROTECTION4.2.3 LOW INPUT VOLTAGE SHUTDOWN4.2.4 OVER-TEMPERATURESECTION 5 CONFORMANCE5.1 CONTINUED AIRWORTHINESS STATEMENT5.2 ENVIRONMENTAL QUALIFICATION STATEMENTSECTION 1 GENERAL DESCRIPTION1.1 INTRODUCTIONThe TA102 Series Dual USB Charging Port is a certified accessory that converts 10 to 32 volts of DC electrical input from the aircraft to standard 5V power for any electronic product that charges using a USB connector. The TA102 provides two Universal Serial Bus-A (USB-A) ports and can be rear mounted or front mounted in a variety of locations throughout the aircraft. The unit is certified to FAA TSO C71 and qualified to multiple RTCA DO-160 requirements, providing confidence and convenience to be mounted in either the cabin or cockpit.This Dual USB Charging Port is designed as a DCP (Dedicated Charging Port) to industry-standard protocol per the USB Battery Charging 1.2 Compliance Plan. Early-generation or smaller consumer electronics typically accept one (1.0) amp of power during charging. However, newer electronics, such as the Apple iPad®, other tablets and larger devices can accept and, in some cases, require up to 2.1 amps of power to charge and operate. As a high power DCP, the TA102 can provide up to 2.1 amps of power to charge any USB device, including the higher demand products. Unlike most dual USB chargers which provide one (1.0) amp on one port and 2.1 amps on the second port, the TA102 can provide 2.1 amps of power to both ports simultaneously. With features like short circuit protection, over-current protection, low voltage shut-down and temperature monitoring, it can handle unforeseen conditions safely.Small, compact and powerful, with plenty of installation flexibility, the TA102 is an ideal choice when selecting a highly useful and effective addition for any aircraft.1.2 TECHNICALSPECIFICATIONS1.2.1 Electrical AttributesInput Voltage: 10-32 VDCInput Power: 24 watts max; 1.7 amps @ 14 VDC / 0.85 amps @ 28 VDC Output Voltage: 5 VDC ±0.25 per portOutput Power: 2.1 amps max per portEfficiency: ~85%nominalTable 1.11.2.2 Physical AttributesWeight: 0.13poundsDimensions: (not including connector) 1.50 inches wide X 1.50 inches high X 0.96 inches deep Charging Ports Type: USB Standard-AMounting: Panel mount; rear or frontTable 1.21.2.3 QualificationsCertification: FAATSO-C71EASA ETSO-C71Environmental Qualification: (see section 5.2) RTCA DO-160G Environmental CategoryF1S2BB[(RCC1)(UG)]XXXXXXY[B(XX)]BRXXMXXXAX Table 1.31.2.4 ConfigurationsPart Number Power Input USB Connector6430102-1 Rear Sealed6430102-2 Bottom Sealed6430102-3 Rear Lighted6430102-4 Bottom LightedTable 1.4SECTION 2 PRE-INSTALLATION CONSIDERATIONS2.1 COOLINGNo external cooling is required. The unit will become warm when in use. This is normal and within operational parameters. No special mounting considerations are required; however, mounting to a metal surface can help dissipate any heat generated and extend the life of the product.LOCATION2.2 EQUIPMENTThe TA102 Dual USB Charging Port is designed for mounting flexibility, allowing for installation in the cockpit or in the cabin. It is designed for panel mounting and can be installed in a rectangular or circular rear mount configuration or, with an available installation kit, can be front mounted with a cosmetic cover plate. An instrument mounting adapter bracket is also available to easily mount the unit in a standard 2-inch round instrument opening that may already exist in the cockpit panel. There are two versions to choose from which allow the input connector to be located either on the rear of the unit or from the bottom.The unit can be mounted in any orientation. Clearance should be provided for the mating connector which may require an additional inch beyond the rear of the unit.OFCABLES2.3 ROUTINGAvoid sharp bends in cabling and routing near aircraft control cables. Avoid close proximity and contact with aircraft structures, avionics equipment or other obstructions that could chafe wires during flight and cause undesirable effects.2.4 LIMITATIONSEnvironmental qualifications were verified per RTCA DO-160, Revision G in lieu of those identified within the minimum performance standards (MPS) of the TSO.The conditions and tests for TSO approval of this article are minimum performance standards. Those installing this article, on or in a specific type or class of aircraft, must determine that the aircraft installation conditions are within the TSO standards, specification of the article and deviations as listed above. TSO articles must have separate approval for installation in an aircraft. The article may be installed only according to 14 CFR part 43 or the applicable airworthiness requirements.2.5 MODIFICATIONSEach model TA102 (part number 6430102-( )) has a nameplate that identifies the manufacturer, part number, description, certifications and technical specifications of the unit. It also includes the “MOD” or modification number representing notable changes in the hardware design of the unit. The following are descriptions of the current modification releases of the TA102 Dual USB Charging Port.MOD 0Modification (MOD) 0 is identified on the nameplate by the lack of marking on the MOD numbers 1 through 9 (i.e. 1-9 are visible).Mod 0 is the initial release of the TA102 Dual USB Charging Port.MOD 1Modification (MOD) 1 is identified on the nameplate by the marking/blacking out of MOD number 1 (i.e. 1 is not visible and 2-9 are visible see Figure 2.2 below for example).Mod 1 of the TA102 Dual USB Charging Port contains the following changes from MOD 0: -Main PC Board Thickness Changed to 0.062” (was 0.031”)MOD 0 MOD 1FIGURE 2.2Modification Nameplate ExamplesSECTION 3 INSTALLATION PROCEDURESINFORMATION3.1 GENERALThis section contains interconnect diagrams, mounting dimensions and other information pertaining to the installation of the TA102 Dual USB Charging Port. After installation of cabling and before installation of the equipment, ensure that power and ground are applied to the proper pins specified in Section 3.3.2, Pin Assignment Information.3.2 UNPACKING AND INSPECTING EQUIPMENTWhen unpacking this equipment, make a visual inspection for evidence of any damage that may have occurred during shipment. The following parts should be included:a. Dual USB Charging Port MCIA P/N 6430102-( )b. Installation Manual MCIA P/N 9017942c. Connector Kit MCIA P/N 9017960i. Mating Connector, 2-pinii. Pins (4) (2 required, 2 spares)iii. Screws, #4-40 x 1/4 flat-head (2)iv. Screws, #4-40 x 5/16 flat-head (2)Optional Equipment Available:a. Circular Rear Mount Installation Kit MCIA P/N 9017945b. Front Mount Installation Kit MCIA P/N 9017946c. Instrument Mount Adapter Kit MCIA P/N 9017947d. Rear Mount Installation Kit MCIA P/N 9017957Equipment Not Provided:a. Cable Harness Wire See Section 3.3.1 for specificationsb. Circuit Breaker Recommendation 2 amp (1 amp may be sufficient for 28V aircraft)(as needed per system requirements)HARNESS3.3 CABLEConstruct the cable harness following the instructions outlined below and per Figure 3.1.Refer to Section 2: Pre-Installation Considerations, for routing precautions.3.3.1 Wire Gauge SelectionUse of PTFE, ETFE, TFE, Teflon or Tefzel insulated wire is recommended for aircraft use.The wire harness should utilize 20-24 AWG stranded wire. Refer to table 3.1 below.Wire Gauge Wire Length20 AWG stranded wire 35 ft22 AWG stranded wire 22 ft24 AWG stranded wire 14 ftTable 3.1Wire Gauge and LengthNote: Pins should be crimped using Molex Hand Crimp Tool 63819-0000 (Preferred), 63811-2800 (obsolete) or 11-01-0200 (obsolete). See the Molex Hand Crimp Tool User Manual for crimpprocedures.3.3.2 Pin Assignment InformationINPUT POWER:Pin A (keyed) – Positive DC input +10 to 32 VDC powerPin B – Negative DC input / ground3.3.3 Harness VerificationWARNING:Failure to install aircraft power and ground wires in the propermating connector locations will permanently damage the unit.Once the cable harness is prepared, prior to connecting the TA102, activate the aircraft power bus and use a multimeter to verify that aircraft power and ground is supplied with appropriate voltage on the proper pins within the mating harness.3.4 MOUNTINGThe TA102 can be installed in one of four ways:∙ rear mount, rectangular ∙ rear mount, circular * ∙ instrument mount *∙ front mount, decorative bezel * ∙ rear mount, decorative bezel ** installation kit required. See Section 3.2, Optional Equipment Available for part number referencePrepare the panel cutout as shown in Figures 3.3, 3.4, 3.5 or 3.6 per the selected mounting option.∙ For Rectangular Rear Mount, Circular Rear Mount and Instrument Mount Installations countersinksin the panel for flat head screws are optional. However, flat head screws are provided for flush appearance. For Front and Rear Decorative Bezel Installations, countersinks in the panel are required.∙ For Rear Mount Installations:Mounting screws length MUST be between (PT + 0.150”) and (PT +0.260”). [PT = panel thickness] Mounting screws provided with the unit are 0.24” and 0.31” (accommodates 0.020” to 0.160” PT). For PT greater than 0.125, the USB connector will be below the surface of the panel (below flush). ∙ For Circular Rear Mount Installations:Mounting screws length MUST be between (PT + 0.200”) and (PT + 0.375”). [PT = panel thickness] Mounting screws provided with the Circular Rear Mount Install Kit are 0.438”. ∙ For Front Mount Installation: Maximum panel thickness is 0.25”.∙ For Rear Mount Installation with Decorative Bezel: Panel thickness greater than 0.065 will cause theUSB connector to be below the surface of the bezel (below flush).Figure 3.1Power InputPin A(6430102-2, -4)Pin BPin B Pin A(6430102-1, -3)2 plcs3.5 INSTALLATION COMPLETIONPrior to operating the unit in the aircraft, it is recommended to verify the output and functionality of the unit. In order to prevent accidental damage to other systems, it is not recommended to attach the output to other equipment prior to verification. Verify the output of the unit at the terminating end of the cable with a multimeter to ensure proper voltage and polarity. Once verified, installation can be completed and functionality should be checked.Figure 3.3Rear Mount InstallationPanel Cutout DetailFigure 3.5Instrument Mount InstallationStep 1: attach adapterplate to unitStep 2: attach adapter plate topanelFigure 3.4Circular Rear Mount InstallationFigure 3.6Front Mount InstallationStep 4: place unit throughpanel cutout. Tightenpawl screws (x2)Step 5: Peel adhesive backing, align pins onrear of cover plate into holes onmounting plate and press firmlyStep 1: installgrommetsStep 2: place screw throughmounting plate and into pawl latch (x2)Step 3: attach mountingplate to unitStep 2: attach unit to panelwith screws (x2)Step 1: installgrommetsStep 3: place adhesive (x2) on panel inlocations shown, and peel backingoff adhesiveStep 4: align pins on rear of cover plate intoholes in panel and press firmly.Figure 3.7Rear Mount Installation with CoverSECTION 4 OPERATIONPERFORMANCE4.1 ELECTRICALThe TA102 Series Dual USB Charging Port converts an aircraft (DC) input voltage within the range specified to a 5V (DC) output. This output power is applied to a dual USB-A connector in accordance with the USB Implementers Forum.The USB D+ and D- data lines communicate with the USB portable device to tell the device it is a dedicated charging port (DCP), capable of a higher current than a standard USB port. This allows the USB portable device to draw up to 2.1 Amps.The unit is designed as a DC-to-DC converter with a series switch on each output to regulate current applied to that output. Each series switch independently reduces the output current to a safe level if the USB portable device draws excess current, is shorted or has a fault.If the temperature of the TA102 becomes elevated due to a fault or excessive load, the device will seamlessly communicate with the USB portable device to lower the charge current. This allows the device to continue charging while the unit returns to a temperature within designed limits. When the temperature returns to a safe level the TA102 will automatically reestablish the higher charge current level with the device and continue charging.FEATURES4.2 PROTECTIVE4.2.1 Short Circuit ProtectionThe TA102 is capable of surviving a short circuit event without permanent damage. The unitgoes into an over-current condition so that the average current is significantly reduced andthe device is protected.4.2.2 Over-Current ProtectionThe TA102 monitors the current draw individually on each port. During an over-currentcondition the voltage is reduced. If the voltage falls below 3.8 VDC the output is turned off fora period of 12 seconds. The output is then checked for continued over-current conditionsevery 16 milliseconds. This condition is referred to as a hiccup mode. The device stays in thismode until the over-current condition is removed, then returns to normal operation.4.2.3 Low Input Voltage ShutdownIf the input voltage applied to the TA102 drops below 10 VDC the unit will shut down until theapplied voltage returns to a level within range.4.2.4 Over-TemperatureWhen the temperature of the TA102 becomes elevated, the unit communicates with the USBportable device to reduce the charge current output (1 amp limit). When the temperaturereturns to an acceptable level the unit automatically returns to a higher charge current asrequired (up to 2.1 amps).SECTION 5 CONFORMANCE5.1 CONTINUED AIRWORTHINESS STATEMENTNo periodic scheduled maintenance or calibration is necessary for continued airworthiness of the TA102 series Dual USB Charging Port. If the unit fails to perform to specifications, the unit must be removed and serviced by Mid-Continent Instruments and Avionics or their authorized designee.5.2 ENVIRONMENTALQUALIFICATIONSTATEMENTMODEL NUMBER: TA102 Series PART NUMBER: 6430102-( ) NOMENCLATURE: Dual USB Charging PortCERTIFICATION: FAA TSO-C71MANUFACTURER:True Blue Power, a division of Mid-Continent Instrument Co., Inc.ADDRESS:9400 E. 34th St. North, Wichita, KS 67226, USA.MANUFACTURERS SPECIFICATIONS:Minimum Performance Specifications: TS102 (03/2013), TDS102 (03/2013)___________________ Qualification Test Reports: QTR1401-1402, QTR1404-1408, QTR1415-1416_______________________ RTCA DO-160: Rev G, dtd 12/08/10 DATES TESTED: 03/2013-04/2013CONDITIONS SECTIONDESCRIPTION OF TESTTemperature and Altitude Low TemperatureHigh Temperature High Temperature Altitude44.5.14.5.34.5.44.6.1Category F1Operating Low Temp = -40°CShort Time Operating High Temp = +70°CNormal Operating High Temp = +55°CAltitude = 55K feetTemperature Variation 5 Category S2Humidity 6CategoryB Operational Shock and Crash Safety 7 Category BVibration 8FixedWing:Category R, Curves C, C1Helicopter: Category U, Curve G[(RCC1)(UG)]Explosion 9CategoryX Waterproofness 10CategoryXFluids 11CategoryX Sand and Dust 12 Category XFungus 13CategoryX Salt Spray 14 Category XMagnetic Effect 15 Category YPower Input 16 Category B(XX)Voltage Spike 17 Category BAudio Freq Conducted Susceptibility 18 CategoryRInduced Signal Susceptibility 19 Category XRadio Frequency Susceptibility 20 CategoryXEmission of Radio Frequency Energy 21 Category MLightning Induced Transient Susceptibility 22 Category XLightning Direct Effects 23 Category XIcing 24CategoryX ESD 25CategoryA Fire, Flammability 26 Category CREMARKS:Sections 4: Category F1 Continuous Operating Low Temperature (-20°C) performed at Short-time Low temperature (-40°C).。

X02xxxN中文资料

Tj= 25°C MAX Tj= 25°C MAX Tj= 25°C MAX Tj= 25°C MAX Tj= 110°C MAX Tj= 110°C TYP Tj= 110°C MAX
Sensitivity
02
03
05
20
20
200
200
50
0.8
0.1
8 0.5
5
6
1.5
5
200
15
20
15
100
Fig.8 : On-state characteristics (maximum values).
I TSM (A). I2 t (A2 s) 100
ITSM 10
I2 t
1 1
Tj initial = 25oC
tp(ms) 10
I TM (A) 100
Tj initial 25oC
10
Tj max
The ST logo is a trademark of STMicroelectronics
VD=67%VDRM RGK = 1 KΩ
ITM= 3 x IT(AV) VR=35V dI/dt=10A/µs tp=100µs dV/dt=2V/µs VD= 67%VDRM RGK = 1 KΩ
Tj= 25°C MIN MAX
Tj= 25°C MAX Tj= 125°C MIN
Tj= 25°C MIN Tj= 25°C TYP
0.8
= 180o
0.6
0.4
0.2 0.0
0
Ttab (oC) 10 20 30 40 50 60 70 80 90 100 110 120 130
Fig.4 : Relative variation of thermal impedance junction to ambient versus pulse duration.

PLM20K44产品说明书

PWM Peak Controler 7500W type D rev01c Final Assembly 01
2012-12-21
U516
x
U510
x
U512, , U514, U505
x
U506
x
U508, U509
x
U507
x
U900
x
U902
x
D3, D304, D307, D504
x
D303, D305
27V.25W5%SOT-23 COAEXPFC52-A01 COAEXPFC70-A01 COAEXPFC70-A03
COCIPI4X2-A01
COSP05FB 6R8.33W5%1206 2R7.33W5%1206 10K.125W1%0805
22n630VMKP7.5 T50WFETD29 T16A400-5x20AL T3A15400-5x20
Q3, Q7, Q307, Q308, Q508 Q4, Q5, Q8, Q9, Q400, Q401, Q403, Q507, Q404, Q12
Q408
Q11 Q10, Q500 Q509
Q505 U300, U401
U407, U408, U504
Ic Operational Amplifier Lm833 SOIC Narrow body Ic dual gate driver FAN3224CMX SOIC-8 Pulse Width Modulator PFC type 1 rev.03a Final Assembly 01
Ic Comparator Lm339D
Ic Digital Isolator SI8441-C Ic Inverting Scmitt trigger 74AHC1G14 SOT353-1 Diode Signal Bas21 SOT-23 Diode Power 1n4006 Diode Zener 6V2 .225W 2% SOT-23

Moxa UPort 404 407 4和7口工业级USB端口扩展器说明说明书

UPort404/407Series4and7-port industrial-grade USB hubsFeatures and Benefits•Hi-Speed USB2.0for up to480Mbps USB data transmission rates•USB-IF certification•Dual power inputs(power jack and terminal block)•15kV ESD Level4protection for all USB ports•Rugged metal housing•DIN-rail and wall-mountable•Comprehensive diagnostic LEDs•Chooses bus power or external power(UPort404)CertificationsIntroductionThe UPort®404and UPort®407are industrial-grade USB2.0hubs that expand1USB port into4and7USB ports,respectively.The hubs are designed to provide true USB2.0Hi-Speed480Mbps data transmission rates through each port,even for heavy-load applications.The UPort®404/407have received USB-IF Hi-Speed certification,which is an indication that both products are reliable,high-quality USB2.0hubs.In addition,the hubs are fully compliant with the USB plug-and-play spec and provide a full500mA of power per port,ensuring that your USB devices function properly.The UPort®404and UPort®407hubs’support12-40VDC power,which makes them ideal for mobile applications. Externally powered USB hubs are the only way to guarantee the broadest compatibility with USB devices.USB-IF CertificationThe UPort®404and UPort®407USB2.0industrial-grade USB hubs have received the USB-IF(USB Implementers Forum)B-IF verifies a number of strict electrical requirements for the high-speed USB operation of USB hubs designed to the USB2.0specification.This means that the UPort®404/407support Hi-Speed USB2.0for up to480Mbps USB transmission,which is fully compliant with interoperability requirements,has enough power for devices to function,and facilitates a smooth transition back to high-speed operation from the suspended state.ESD Level4ProtectionElectrostatic discharge(ESD)could be as severe as having more than1,000volts of ESD with a high rise-time(dv/dt)breaking through the junction layer of protective devices.In order to avoid serious damage,Moxa’s UPort®404/407USB hubs provide ESD Level4(contact8kV,air15kV) protection,which increases the quality and value of the user’s end product.SpecificationsUSB InterfaceSpeed12Mbps,480MbpsUSB Connector USB Type BUSB Standards USB1.1/2.0compliantNo.of USB Ports UPort404Series:4UPort407Series:7Power ParametersInput Current UPort404Series:1.3A@12VDCUPort407Series:2.3A@12VDCInput Voltage12to40VDCPhysical CharacteristicsHousing AluminumDimensions UPort404Series:80x35x130mm(3.15x1.38x5.12in)UPort407Series:100x35x192mm(3.94x1.38x7.56in) Weight Packaged:UPort404Series:855g(1.88lb)UPort407Series:965g(2.13lb)Product Only:UPort404Series:850g(1.87lb)UPort407Series:950g(2.1lb)Installation Wall mounting,DIN-rail mounting(optional) Environmental LimitsOperating Temperature Standard Models:0to60°C(32to140°F)Wide Temp.Models:-40to85°C(-40to185°F)Storage Temperature(package included)Standard Models:-20to75°C(-4to167°F)Wide Temp.Models:-40to85°C(-40to185°F)Standards and CertificationsEMC EN55032/24EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:8kV;Air:15kVIEC61000-4-3RS:80MHz to1GHz:10V/mIEC61000-4-4EFT:Power:2kVIEC61000-4-5Surge:Power:1kVIEC61000-4-6CS:150kHz to80MHz:10V/m;Signal:0V/mIEC61000-4-8PFMFEnvironmental Testing IEC60068-2-1Safety UL508Freefall IEC60068-2-34DeclarationGreen Product RoHS,CRoHS,WEEEMTBFTime UPort404Series:1,490,340hrsUPort407Series:1,111,361hrsStandards Telcordia(Bellcore),GBWarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x UPort404/407Series USB hubInstallation Kit1x wall-mounting kitCable1x USB type A male to USB type B malePower Supply1x power adapter,universal Documentation1x quick installation guide1x substance disclosure table1x warranty cardDimensionsUPort404UPort407Ordering InformationModel Name USB Interface No.of USB Ports Housing Material Operating Temp.Power Adapter IncludedUPort404USB2.04Aluminum0to60°C✓UPort407USB2.07Aluminum0to60°C✓UPort404-T USB2.04Aluminum-40to85°C✓UPort407-T USB2.07Aluminum-40to85°C✓Accessories(sold separately)CablesCBL-USBA/B-100USB Type A to USB Type B cable,1mPower AdaptersPWR-12300-WPEU-S1Locking barrel plug,12VDC,3A,100to240VAC,Continental Europe(EU)plug,0to40°C operatingtemperaturePWR-12300-WPUK-S1Locking barrel plug,12VDC,3A,100to240VAC,United Kingdom(UK)plug,0to40°C operatingtemperaturePWR-12300-WPUSJP-S1Locking barrel plug,12VDC,3A,100to240VAC,United States/Japan(US/JP)plug,0to40°Coperating temperaturePWR-12300-WPCN-S1Locking barrel plug,12VDC,3A,100to240VAC,China(CN)plug,0to40°C operating temperature PWR-12300-WPAU-S1Locking barrel plug,12VDC,3A,100to240VAC,Australia(AU)plug,0to40°C operating temperature DIN-Rail Mounting KitsDK-25-01DIN-rail mounting kit,2screws©Moxa Inc.All rights reserved.Updated Oct24,2019.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。

松下投影机产品说明

G-LCD
Dichroic Mirror
Lens Array
Lamp
PBS Array
褪色
变形
灼伤
※长期使用画质(偏光板)老化
■网状结构防止偏光板老化
蓝色偏光板老化，画面偏黄
上图原本是纯白画面，蓝色偏光板相对更容易老化，老化后光通过率降低，导致蓝色光减弱，画面呈黄色。
緑
白
青
赤
Wire grid
无机偏光板：微米级金属网间距 17
2倍变焦镜头 & 水平/垂直光轴平移功能 (BX200NT)
■使用各种安装方式和位置
※仅BX200NT
7.2m
3.6m
120英寸屏幕
■简单对应更换投影机的情况
4.6 5.8
S社
3.6
5.8
E社
3.6
4.0
5.2
3.7
5.0
3.7 4.4
7.2
S社 N社 H社
BX200NT
即使吊装也可以轻松更换灯泡
X200
幕布与投影机之间的有效距离
最小（米）
最大（米）
2.4
4.8
3.0
6.0
3.6
7.2
4.5
9.0
32
幕布尺寸
80〝 100〝 120〝 150〝
X500
幕布与投影机之间的有效距离
最小（米）
最大（米）
2.3
PT-BX200NT
XGA (1024 x 768) 4000 lm / 600 :1
第五代强光感应自动清洁过滤器（ACF）
YES DVI接口、使用与BX100NT同样灯泡 (寿命5000小时）

HP-UX 10.20 用户指南说明书

Support Plus User’s Guide HP-UX Version 10.20Part No. B3782-90840NOTICESThe information in this document is subject to change without notice.Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and ﬁtness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.Warranty.A copy of the speciﬁc warranty terms applicable to your Hewlett-Packard product and replacement parts can be obtained from your local Sales and Service Ofﬁce.Restricted Rights Legend. Use, duplication, or disclosure by the U.S. Government Department is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 for DOD agencies, and subparagraphs (c) (1) and (c) (2) of the Commercial Computer Software Restricted Rights clause at FAR 52.227-19 for other agencies.HEWLETT-PACKARD COMPANY 3000 Hanover Street Palo Alto, California 94304 U.S.A. Copyright Notices.© 2000 Hewlett-Packard Company, all rights reserved.Reproduction, adaptation, or translation of this document without prior written permission is prohibited, except as allowed under the copyright laws.Trademark Notices.UNIX® is a registered trademark of The Open Group.HP-UX Release 10.20 and later and HP-UX Release 11.00 and later (in both 32 and 64-bitconﬁgurations) on all HP 9000 computers are Open Group UNIX 95 branded products.Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.1Table of ContentsIntroduction......................................................................2Getting Started ...............................................................4Deciding Which Bundle You Want .................................5Mounting the CD .............................................................9Checking for Last-Minute Information ........................11Setting Up Access to Support Plus.. (13)Sharing Support Plus with Remote Systems ........14Setting Up Hard Disk Access..................................15Installing the Selected Bundles ...................................17Bootable Ofﬂine Diagnostics and Utilities ...................20Getting Year 2000 Support ...........................................22Getting Help...................................................................23Getting More Information.............................................24IntroductionHP-UX 10.20 Support Plus delivers diagnostics andHP-UX system patches. These patches enable new hard-ware and ﬁx known defects. In some cases, a patch may deliver new software functionality.This booklet accompanies the CD labeled HP-UX 10.20 Support Plus, which includes the following software:•Diagnostics, including Support Tool Manager (STM) for online diagnostics,ODE(off-line diagnostics),EMS hardware monitors, Predictive Support (S800 only),and EMS Kernel Resource Monitor.•General release patches, including Year 2000 (Y2K) changes and current patches for all Core OperatingSystem (OS) software.•Hardware/critical patches,including hardware enable-ment, critical patches, and current Core OS Y2Kchanges.2•Quality Pack software for workstations, including all recommended stable, Y2K, critical, and third partypatches with full OS release testing for selected Core OS productsThis booklet describes recommended patch bundles, gives instructions for getting started, and provides pointers for more information.Note The Support Plus CD supplies patches to the Core OS and diagnostic products. It does notcreate a new HP-UX release, and you cannotuse it to install a new OS.3Getting StartedUse this general installation procedure. Each step is described in the following sections of this booklet:1.Decide which bundle you want (page5).2.Mount the CD (page9).3.Read the documentation for last-minute information(page11).4.Make the data accessible from the target system(page13).5.Install the selected bundle (page17).4Deciding Which Bundle You WantUse the table in this section to determine which bundle you need to install.Note For all bundles listed in the following table, the supported systems are HP-UX workstations orservers running HP-UX 10.20.Note Unless otherwise indicated, all bundles will be located directly under your CD mount-pointdirectory,for example:/cdrom/XSW800GR1020.See “Mounting the CD” on page9 for moreinformation.5If yourplatformis:And you want to:You should install:Updated:HP-UX work-station or server Install all of thelatest diagnostictoolsDiagnostic bundle:OnlineDiagQuarterlyHP-UX work-station or server Install speciﬁcdiagnostic toolsEMS-Config,EMS-Core,Predictive,Sup-Tool-Mgr-700,Sup-Tool-Mgr-800,or other products fromthe OnlineDiagbundleQuarterlyHP-UX work-station Enable newadd-on hardware(as directed bydocumentationwith new hardwarepurchases)Hardware (HW)enablement bundle forHP-UX workstations:XSW700HW1020Quarterly6HP-UX work-station Install stable,Y2K, critical, &third partyrecommendedpatches with fullOS release testingfor selected CoreOS productsQuality Pack (QPK)bundle:700QPK1020Semi-annuallyHP-UX work-station Get additionalCore OS and Y2Kpatches from thefull set of generalrelease patchesGeneral Release (GR)bundle for HP-UXworkstations:XSW700GR1020QuarterlyIf yourplatformis:And you want to:You should install:Updated:7HP-UX server Enable new add-on hardware (asdirected bydocumentationwith new hardwarepurchases)andinstall critical orY2K patchesHardware/Critical(HWCR)bundle:XSW800HWCR1020QuarterlyHP-UX server Bring all Core OSsoftware to currentpatch level withoutcustom patchselectionGeneral Release (GR)bundle for HP-UX servers:XSW800GR1020QuarterlyIf yourplatformis:And you want to:You should install:Updated:8Mounting the CD1.Open a terminal window and become root on yoursystem.2.If the CD drive is external, switch it on.3.Put the Support Plus CD into the drive. Wait for thebusy light to stop blinking.4.If necessary,deﬁne a new directory as the mount pointfor the CD drive.For example,to deﬁne/cdrom as the mount point, enter:mkdir /cdrom5.If necessary, identify the drive device ﬁle:ioscan -fnC diskThis lists all recognized CD drives and their associated deviceﬁles.Theﬁle name will be something similar to /dev/dsk/c1t2d0.6.Mount the CD drive to the mount-point directory:mount -r /dev/dsk/c1t2d0 /cdromIf the CD drive’s device-ﬁle name is not clt2d0, use the name you found using ioscan in Step 5 above.7.You can now access the CD via the mount-pointdirectory. For example:ls/cdromChecking for Last-Minute Information Support Plus often contains last-minute information. Before proceeding,HP strongly recommends that you read the documentation for each bundle or patch you wish to load. There are several important sources of information:•The Read Before Installing document shipped with each Support Plus CD. This short document contains the latest information about the release.•Each patch bundle has its own bundle readme ﬁle.This ﬁle contains additional installation instructions, notes about problems in previous releases, a list ofpatches (and their dependencies) in the bundle,changes since the last release, and a listing of diskspace usage. You can print or view these ﬁles directly from the CD-ROM. For example:more /cdrom/XSW800GR1020.readme•Each patch on the CD has its own patch textﬁle in the /cdrom/TEXT_FILES directory. This ﬁle containscomplete details about the patch. (Patch text ﬁles are also included with individual patches that you retrievefrom HP.)You can print or view these directly from the CD-ROM. For example:more /cdrom/TEXT_FILES/PHCO_12140.txt •Each bundle readmeﬁle is also available in HTML for-mat. These ﬁles contain hyperlinks to the patch textﬁles. You can enter a URL into a web browser to view these ﬁles directly from the CD-ROM. For example:file:/cdrom/XSW800GR1020.readme.html •Diagnostic products have readme ﬁles and additional information in the/cdrom/DIAGNOSTICS directory.This information is in Adobe®Portable Document For-mat (PDF) ﬁles. A free version of the Adobe Acrobat®Reader is available at:To simplify sharing of patch information, you may wish to copy the documentation ﬁles onto your own system. The hyperlinks from the HTML bundle readme ﬁles to the patch text ﬁles will work as long as the HTML ﬁles reside in the same directory as the TEXT_FILES subdirectory.Setting Up Access to Support Plus•If you mounted the CD on the system that is the target for the patch or diagnostic installation, no furtherdepot preparation is required. Proceed to the section,“Installing the Selected Bundles” on page17.•If you want direct access to the CD from one or two other systems,see“Sharing Support Plus with Remote Systems” on page14.•If you want to access Support Plus depots from more than two other systems, see “Setting Up Hard DiskAccess” on page15.Sharing Support Plus with Remote SystemsTo enable direct access from one or two other systems,you must register a Support Plus bundle with the swreg(1M) command. For example, to register the XSW800GR1020 bundle if the Support Plus CD is mounted to/cdrom:1.Register the depot:swreg -l depot /cdrom/XSW800GR10202.Install the bundles (see “Installing the Selected Bun-dles” on page17).3.Disable remote access by unregistering the depotbefore unmounting the CD, using the swreg -uoption:swreg -u -l depot /cdrom/XSW800GR1020Setting Up Hard Disk AccessIf more than two systems must access the depot, or if you cannot dedicate the CD drive to the Support Plus media, HP recommends that you copy the patch depots to a hard disk using the swcopy(1M) command. For example, with the CD mounted at/cdrom, use:swcopy -s /cdrom/XSW800GR1020 /\* @ /var/tmp/MyDepotThis copies the contents of the XSW800GR1020bundle and depot to the local system under the/var/tmp/MyDepot directory. The new depot is automatically registered for use by remote systems.Note If the swcopy interactive user interfaceappears, an unexpected condition wasencountered and you may need to enteradditional information or take other action.Note HP recommends that you do not merge depots created on different versions of HP-UX. Also,HP recommends that both the host system anddepot should have the same major HP-UXversion (for example, 10.x).Installing the Selected BundlesThe bundles contained within the Support Plus CD are built,tested,and intended for use as a unit.Although you can select individual patches from the bundles, this requires additional analysis of the readme ﬁles to ensure you do not overlook software dependencies.To ensure greatest reliability, HP recommends the following tasks for all systems:1. Plan for system down timeEven though the swinstall(1M) command used for installing the bundles requires that the system has networking enabled, it is prudent to limit system activity during any installation. Also, Support Plus bundles commonly include patches that require a system reboot. Therefore, you should plan the installation for an appropriate time and announce a system outage to the users ahead of time.2. Create a system backupSome amount of risk is involved in any systemmodiﬁcation. You should implement a recovery plan as an insurance policy against a system failure. One recovery technique is to use HP’s Ignite-UX tools (available from /products/IUX/) to create recovery images.3. Review the documentationThe bundle readme ﬁles may contain additional installa-tion instructions and other important information. Although you should already have reviewed the patch doc-umentation, it is wise to recheck the readme ﬁles before installing.See“Checking for Last-Minute Information”on page11.4. Install the patch bundlesHP recommends that after you have selected a bundle for installation (see “Deciding Which Bundle You Want” on page5), you install the bundle using the matching operations of the swinstall command.For example,to install from a CD mounted and registered on the system grendel:swinstall -s grendel:/cdrom/XSW800GR1020 \ -x match_target=true -x autoreboot=true Note The Support Plus CD contains multiple depots.The swinstall command recognizes them aslocal directories, not as individual CDs.Note If the swinstall interactive user interfaceappears, an unexpected condition wasencountered and you may need to enteradditional information or take other action.You can use the swinstall command’s preview mode (-p option) to get an idea of what to expect for the bundle you want to install. For example:swinstall -p -s grendel:/cdrom/XSW800GR1020 \ -x match_target=true-x autoreboot=trueBootable Ofﬂine Diagnostics and Utilities Experienced administrators can use the Support Plus CD-ROM as a bootable media from which to run ofﬂine diagnostics and utilities.1.Boot the computer system to the PDC (BOOTADMIN)prompt:Main Menu: Enter command or menu > 2.List the bootable devices by typing:search3.Select the CD-device that contains the Support PlusCD-ROM.4.Boot from that device. For example:boot SCSI.3.35.Wait for the ISL prompt:ISL >6.Start the Ofﬂine Diagnostic Environment (ODE) bytyping:ODEAfter the ODE starts, you can type the following com-mands at the ODE prompt:help To display a list and description ofthe available commands.help <command>To display additional information. help <var>To display additional information. ls To list the ODE modules that willrun on your computer.<module name>To run an ODE moduleinteractively.help To display a list of commands oncean ODE module loads.run <module_name>To run an ODE modulenon-interactively.For complete information, see the Support Plus: Diagnos-tic User’s Guide, available on the Support Plus CD-ROM (/cdrom/DIAGNOSTICS/DIAG_USR.PDF) or from the Diagnostics web site:/hpux/systems/index.htmlGetting Year 2000 SupportIf you have an Instantly Ignited system, all Y2K patches for the Core OS that were available at the time it was ignited have been loaded onto your system. The Support Plus CD lets you load more recent Y2K patches without web access. However, the most recent patches are avail-able on the web:/products/Y2K/For general information about the Y2K transition and how it affects your computers and applications, refer to the fol-lowing web site:/year2000/Getting HelpFor technical support, software management and elec-tronic patch management services, contact HP’s IT Resource Center (formerly known as the HP Electronic Support Center):For Americas, Asia, Paciﬁc:For Europe:Use the HP IT Resource Center to:•Quickly access customized support tools.•Make informed decisions with proactive information.•Access critical support information.•Check status of standard patch bundles.Getting More InformationIncluded with the Support Plus CD kit:•Read Before Installing document,containing the latest critical information about the Support Plus release. Included on the Support Plus CD-ROM:•Bundle readme ﬁles, located at the same directory level as each bundle.•Patch text ﬁles (for all patches on the CD-ROM), located in the/cdrom/TEXT_FILES directory.•Bundle readmeﬁles in HTML format(with hyperlinks to the patch text ﬁles), located at the same directorylevel as each bundle.•Diagnostics readme ﬁles and other information, con-tained in PDF ﬁles in the/cdrom/DIAGNOSTICSdirectory.•A PDF copy of this document:/cdrom/USRGUIDE.PDF • A detailed technical reference for patch operations: /cdrom/PATCH_TUTORIAL.PDFAvailable in the HP-UX Operating System section of HP’s documentation web site (), or on HP’s Instant Information CD:•Managing HP-UX Software With SD-UX, for informa-tion on using swinstall(1M),swcopy(1M),swreg(1M), and other Software Distributor (SD-UX) commands.•Installing and Updating HP-UX 10.x for detailed instructions about system installation and usingthe Ignite-UX product.•Other HP-UX manuals and documentation.For the latest information on hardware support tools,such as STM and EMS Hardware Monitors, refer to the “Systems Hardware, Diagnostics and Monitoring” section of Hewlett-Packard’s on-line documentation site at:/hpux/systems/。

UJA1023T中文资料

−27 −40 −8
-
+40 +150 +8
V °C kV
electrostatic discharge voltage human body model; on pins LIN, BAT, C1, C2 and C3 C = 100 pF; R = 1.5 kΩ
All outputs turned off, LIN recessive, Vth1 selected. Junction temperature in accordance with IEC60747-1. An alternative deﬁnition of Tvj = Tamb + P × Rth(j-a), where Rth(j-a) is a ﬁxed value to be used for calculating Tvj. The rating for Tvj limits the allowable combinations of power dissipation (P) and ambient temperature (Tamb).
UJA1023_4
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 04 — 5 July 2006
2 of 48
Philips Semiconductors
UJA1023
4. Ordering information
Table 2. Ordering information Package Name UJA1023T SO16 Description plastic small outline package; 16 leads; body width 3.9 mm Version SOT109-1 Type number

SBR20U100CT中文资料

20A SBR®Super Barrier RectifierFeatures MechanicalData• Case Material: Molded Plastic, UL FlammabilityClassification Rating 94V-0• Moisture Sensitivity: Level 1 per J-STD-020C• Terminals: Matte Tin Finish annealed overCopper leadframe. Solderable per MIL-STD-202,Method 208• Marking: See Page 4• Ordering Information: See Page 4• Low Forward Voltage Drop• Excellent High Temperature Stability• Super Barrier Design• Soft, Fast Switching Capability• Molded Plastic TO-220AB,and ITO-220AB packages• Lead Free Finish, RoHS Compliant (Note 2)Maximum Ratings @ T A = 25ºC unless otherwise specifiedSingle phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20%.Characteristic SymbolValueUnit Peak Repetitive Reverse VoltageWorking Peak Reverse VoltageDC Blocking VoltageV RRMV RWMV RM100 VRMS Reverse Voltage V R(RMS)71 VAverage Rectified Output Current @ T C = 140ºC I O20 ANon-Repetitive Peak Forward Surge Current 8.3msSingle Half Sine-Wave Superimposed on Rated LoadI FSM200 APeak Repetitive Reverse Surge Current (2uS-1Khz) I RRM 3 ANon-Repetitive Avalanche Energy(T J = 25ºC, I AS = 5A, L = 8.5 mHE AS140 mJRepetitive Peak Avalanche Power(1µs, 25ºC)P ARM13,200 WMaximum Thermal Resistance (per leg)Package = TO-220ABPackage = ITO-220ABRӨJC 24°C/WOperating and Storage Temperature Range T J, T STG-65 to +175 ºCElectrical Characteristics@ T A = 25ºC unless otherwise specifiedCharacteristic SymbolMin Typ Max Unit Test ConditionReverse Breakdown Voltage (Note 1) V(BR)R100 - - V I R = 0.5 mAForward Voltage Drop V F--0.57-0.700.630.82VI F = 10A, T J = 25ºCI F = 10A,T J = 125ºCI F = 20A, T J = 25ºCLeakage Current (Note 1) I R- -0.525mAV R = 100V, T J= 25 ºCV R = 100V, T J = 125 ºCNotes:1. Short duration pulse test used to minimize self-heating effect.2. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7.__________SBR is a registered trademark of Diodes Incorporated.Package Outline DrawingsTO-220ABTO-220ABDIM. MIN. MAX.A 4.47 4.67b 0.71 0.91b1 1.17 1.37c 0.31 0.53D 14.65 15.35D1 8.50 8.90E 10.01 10.31e 2.54type1 4.98 5.18F 1.17 1.37J1 2.52 2.82L 13.40 13.80L1 3.56 3.96ØP 3.735 3.935Q 2.59 2.89All Dimensions in MillimetersITO-220ABITO-220ABDIM. MIN. MAX.A 4.30 4.70b 0.50 0.75b1 1.10 1.35b2 1.50 1.75c 0.50 0.75D 14.80 15.20E 9.96 10.36e 2.54typF 2.80 3.20J1 2.50 2.90L 12.80 13.60L1 1.70 1.90ØP 3.50typQ 2.70typAll Dimensions in MillimetersMarking, Polarity, Weight & Ordering InformationSBR20U100CT SBR20U100CTFP Case StyleTO-220AB ITO-220ABtAnodeCommonCathode AnodePolarityCasetAnodeCommonCathode AnodeMarking2.1g 1.9gWeightOrderingInformationSBR20U100CT SBR20U100CTFP50 pieces/tube50 pieces/tubeYY = Last two digits of year, ex = 06 = 2006Date CodeWW = Week (01-52)Other MarkingInformationA = Foundry CodeB = Assembly CodeIMPORTANT NOTICEDiodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changeswithout further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any productdescribed herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shallassume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,harmless against all damages.LIFE SUPPORTDiodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed writtenapproval of the President of Diodes Incorporated.。

USB 2.0 薄型扩展板说明书

USB 2.0 Slim HUBVersion 1.1Contents1.0I n t r o d u c t i o n………..…………………………….P.22.0F e a t u r e s……………….………………………….P.23.0 Specification ………………………………………..P.34.0 Installation …………...…………….………….…….P.3USB 2.0 Slim HUB User's Manual1.0 IntroductionThis is designed in accordance to USB specification Rev 1.1/2.0 which act as a bridge between the main computer host and the down stream USB devices. It is able to complement PC serial interface by connecting a full range of peripherals, which is very simple and flexible for the users.There is one upstream port that connects to the PC host and there are four down steam ports connecting up to 127 USB devices in a tiered-star configuration. It supports both full speed (480M bps) and low speed (1.5M bps) devices which include keyboards, mice, scanner.It is also protected by automatic per-port over-current detection and recovery and the LED indicating the connection status and power source.2.0 Featuresz Full compliance with USB specification Rev. 1.1. z With one up-stream port and four down-stream ports. z Connects up to 127 devices in a tiered star configuration.z Supports both full-speed (12M bps) and low-speed (1.5M bps) devices. z Select between self-powered mode and bus-powered mode automatically. z Per port over current detection/protection and power switch control . z LED for bus-power, self-power and four down-stream connection status.LED light DC JackUSB port3.0 Specificationsport 1-Upstreamport4-Downstream-LED: 4 for BUS Power status when device connect.The “GREEN” light is power .The “RED” light is for USB 2.0 high speed.-Enclosure: Plastic-Per port Output current: 500mA-Operating temperature: 0 degrees to 40 degrees-Storage temperature: -20 degrees to 60 degreesRH-Humidity: 0%80%~-Power Adapter 1.5 A , 6 V , 2.0 mm , out “ – “ , inside “ + “4.0 Installation1.Plug the DC plug into the DC jack and plug the AC adaptor into an electrical outlet.Please check the electrical out let has the same voltage as the hub adaptor.2.Plug Connector A into the USB port of host computer.3.Plug Connector B into the upstream port of the hub.4.Plug all the devices into downstream port of the hub.5.When the hub is connected to the computer, the LED lights will sparkle.。

UXB02070H3CC100中文资料

For technical questions, contact: ff3cresistors@Document Number: 28726UXA 0204, UXB 0207, UXE 0414Vishay BeyschlagHigh Precision Leaded ResistorsDESCRIPTIONUXA 0204, UXB 0207 and UXE 0414 high precision leaded thin film resistors combine the proven reliability of the professional products with an exceptional level of precision and stability. Therefore they are perfectly suited for applications in the fields of precision test and measuring equipment and particularly for the design of calibration references and standards.FEATURES•Superior thin film technology•Exceptional low TCR: ± 02 ppm/K to ± 10 ppm/K •Super tight tolerance: ± 0.01 % to ± 0.25 %•Exceptional overall stability: class 0.02•Wide resistance range: 22 Ω to 1 M Ω•Lead (Pb)-free solder contacts•Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes•Compatible with “Restriction of the use of Hazardous Substances” (RoHS) directive 2002/95/EC (issue 2004)APPLICATIONS•Precision test and measuring equipment•Design of calibration references and standardsMETRIC SIZEDIN:020*********CECC:ABDTECHNICAL SPECIFICATIONSDESCRIPTION UXA 0204UXB 0207UXE 0414CECC size AB DResistance range 22 Ω to 221 k Ω10 Ω to 1 M Ω22 Ω to 511 k ΩResistance tolerance ± 0.25 %; ± 0.1 %; ± 0.05 %; ± 0.01 %± 0.1 %; ± 0.05 %Temperature coefficient ± 10ppm/K; ± 05ppm/K; ± 02ppm/K ± 10ppm/K; ± 05ppm/KOperation modeprecision precision precision Climatic category (LCT/UCT/days)20/125/5620/125/5620/125/56Rated dissipation:P 850.05W 0.125 W 0.25 W P 700.1 W 0.25W 0.5W Operating voltage, U max AC/DC 200 V 250 V 300 V Film temperature125°C 125°C 125°C Max. resistance change at P 70for resistance range, ΔR /R max., after:100 Ωto 100 k Ω100 Ωto 250 k Ω100 Ωto 100 k Ω2000h≤ 0.05 %≤ 0.05 %≤ 0.05 %Max. resistance change at P 85for resistance range, ΔR /R max., after:100 Ωto 100 k Ω100 Ωto 250 k Ω100 Ωto 100 k Ω1000h ≤ 0.02 %≤ 0.02 %≤ 0.02 %8000h ≤ 0.04 %≤ 0.04 %≤ 0.04 %225000h≤ 0.12 %≤ 0.12 %≤ 0.12 %Specified lifetime225 000h225 000h225 000hPermissible voltage against ambient :1 minute 300V 500V 800V continuous75V 75V 75V Failure rate≤ 0.7 x 10-9/h≤ 0.3 x 10-9/h≤ 0.1 x 10-9/hDocument Number: 28726For technical questions, contact: ff3cresistors@UXA 0204, UXB 0207, UXE 0414High Precision Leaded ResistorsVishay Beyschlag12NC INFORMATIONComponents may be ordered by using either a simple clear text ordering code, see “Type Description and Ordering Code” or Vishay BCcomponents’ unique 12NC.Numeric Ordering Code (12NC)•The resistors have a 12-digit Part Number starting with 2312.•The subsequent 4digits indicate the resistor type,specification and packaging; see the 12NC Part Number table.•The remaining 4digits indicate the resistance value:–The first 3digits indicate the resistance value.–The last digit indicates the resistance decade in accordance with the 12NC Indicating Resistance Decade table.Last Digit of 12NC Indicating Resistance Decade12NC ExampleThe Part Number of a UXA 0204 resistor, value 47 k Ω and TCR 10 with ± 0.1 % tolerance, supplied on bandolier in a box of 1000 units is: 2312 662 34703.Note:(1) Readable 12NC coding of resistance values is restricted to values with three significant digits. For resistance values with more than three significant digits, a non readable sequential number will be issued by the factory for each requested combination of resistance value and tolerance.RESISTANCE DECADELAST DIGIT10 Ωto 99.9 Ω9100 Ωto 999 Ω11 k Ω to 9.99 k Ω210 k Ωto 99.9 k Ω3100k Ω to 999 k Ω412NC PART NUMBER - resistor type and packagingDESCRIPTIONORDERING CODE 2312........BANDOLIER IN BOX BANDOLIER IN BOX BANDOLIER ON REEL BANDOLIER ON REEL BANDOLIER ON REEL TYPETCRTOL.CU 100 units C1 1000 units R1 1000 units R2 2500 units RP 5000 units UXA 0204± 10 ppm/K± 0.25 %562 2....662 2....462 2....--± 0.1 %562 3....662 3....462 3....--± 0.05 %562 4....662 4....462 4....--± 0.01 %562 7....662 7....462 7....--(1)562 91...662 91...462 91...--± 05 ppm/K± 0.25 %563 2....663 2....463 2....--± 0.1 %563 3....663 3....463 3....--± 0.05 %563 4....663 4....463 4....--± 0.01 %563 7....663 7....463 7....--(1)563 91...663 91...463 91...--± 02 ppm/K± 0.25 %564 2....664 2....464 2....--± 0.1 %564 3....664 3....464 3....--± 0.05 %564 4....664 4....464 4....--± 0.01 %564 7....664 7....464 7....--(1)564 91...664 91...464 91...--UXB 0207± 10 ppm/K± 0.25 %572 2....672 2....472 2....-577 2....± 0.1 %572 3....672 3....472 3....-577 3....± 0.05 %572 4....672 4....472 4....-577 4....± 0.01 %572 7....672 7....472 7....-577 7. (1)572 91...672 91...472 91...-577 91...± 05 ppm/K± 0.25 %573 2....673 2....473 2....-578 2....± 0.1 %573 3....673 3....473 3....-578 3....± 0.05 %573 4....673 4....473 4....-578 4....± 0.01 %573 7....673 7....473 7....-578 7. (1)573 91...673 91....473 91...-578 91...± 02 ppm/K± 0.25 %574 2....674 2....474 2....-579 2....± 0.1 %574 3....674 3....474 3....-579 3....± 0.05 %574 4....674 4....474 4....-579 4....± 0.01 %574 7....674 7....474 7....-579 7. (1)574 91...674 91...474 91...-579 91...UXE 0414± 10 ppm/K± 0.1 %592 3....692 3....-597 3....-± 0.05 %592 4....692 4....-597 4....-(1)592 91...692 91...-597 91...-± 05 ppm/K± 0.1 %593 3....693 3....-598 3....-± 0.05 %593 4....693 4....-598 4....-(1)593 91...693 91...-598 91...- For technical questions, contact: ff3cresistors@Document Number: 28726UXA 0204, UXB 0207, UXE 0414Vishay BeyschlagHigh Precision Leaded ResistorsNotes:(1) Please refer to table PACKAGING, see next page.Products can be ordered using either the Product Description or the 12NC. The PART NUMBER is shown to facilitate the introduction of a unified part numbering system.DIMENSIONSPART NUMBER AND PRODUCT DESCRIPTION UX SERIESPart Numbering: UXB02070F1001AC100MODEL/SIZE SPECIAL CHARACTERTCRVALUETOLERANCE PACKAGINGSPECIALUXA0204UXB0207UXE04140 = neutralH = ± 2 ppm/K G = ± 5 ppm/K F = ± 10 ppm/K3 digit value 1 digit multiplier MULTIPLIER 9 = *10-1 2 = *1020 = *100 3 = *1031 = *1014 = *104T = ± 0.01 %A = ± 0.05 %B = ± 0.1 %C = ± 0.25 %C1CU R1R2RPup to 2 digits 00 = standardProduct Description: UXB 0207-10 0.05 % C1 1K0UXB 0207100.05 %C11K0MODEL SIZE TCR TOLERANCE PACKAGING (1)RESIST ANCE VALUEUXA UXB UXE020*********± 2 ppm/K ± 5 ppm/K ± 10 ppm/K± 0.01 %± 0.05 %± 0.1 %± 0.25 %C1CU R1R2RP1K0 = 1.0 k Ω47K = 47 k Ω50R5 = 50.5 ΩDIMENSIONS - leaded resistor types, mass and relevant physical dimensionsTYPE D max (mm)L max (mm)d nom (mm)I min (mm)M min (mm)MASS (mg)UXA 0204 1.6 3.60.529.0 5.0125UXB 0207 2.5 6.30.628.07.5220UXE 04144.011.90.831.015.0750SCRIPT MARKING - printed resistance value and letter coding for TCR and toleranceRESISTANCE VALUETOL.(%)LETTER CODETCR (ppm/K)LETTER CODEClear text code for value± 0.25C ± 10B ± 0.1B ± 05A ± 0.05A ± 02T ± 0.01T−−B 0200F 17UX 00A C 110Document Number: 28726For technical questions, contact: ff3cresistors@UXA 0204, UXB 0207, UXE 0414High Precision Leaded ResistorsVishay BeyschlagNotes:(1) Resistance values to be selected from the E192 series, for other values please contact the factory.(2) TCR 10 and TCR 05 are specified over the temperature range from - 20°C to + 85°C.(3) TCR 02 is specified over the temperature range from 0°C to + 60°C.DESCRIPTIONProduction is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body (85 % Al 2O 3) and conditioned to achieve the desired temperature coefficient. Nickel plated steel termination caps are firmly pressed on the metallized rods.Special laser devices are used repeatedly to achieve the target value by slowly and smoothly cutting a helical groove in the resistive layer without damaging the ceramics. A further conditioning is applied in order to stabilise the trimming result. Connecting wires of electrolytic copper plated with pure tin are welded to the termination caps. The resistors are covered by protective coating designed for electrical, mechanical and climatic protection.The terminations receive a final pure tin on nickel plating. Script marking designates the resistance value plus coded TCR and tolerance.The result of the determined production is verified by an accelerated ageing (burn-in) and extensive testing procedure performed on 100 % of the individual resistors.Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1.ASSEMBLYThe resistors are suitable for processing on automatic insertion equipment and cutting and bending machines.E xcellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry,including alcohols, esters and aqueous solutions. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system.APPROVALSWhere applicable, the resistors are tested in accordance with CECC 40101-806 which refers to EN 60115-1 and EN 140100.Vishay B EYSCHLAG has achieved "Approval of Manufacturer" in accordance with EN 100114-1PACKAGINGMODEL REELBOXBANDOLIER ON REELCODE PIECES/BOXCODE UXA 1000R11001000CU C1UXB 10005000R1RP 1001000CU C1UXE2500R21001000CU C1TEMPERATURE COEFFICIENT AND RESISTANCE RANGEDESCRIPTIONRESISTANCE VALUE (1)TCRTOLERANCE UXA 0204UXB 0207UXE 0414± 10 ppm/K (2)± 0.25 %22 Ω to 221 k Ω10 Ω to 1 M Ω-± 0.1 %43 Ω to 221 k Ω10 Ω to 1 M Ω22 Ω to 511k Ω± 0.05 %100 Ω to 180 k Ω24 Ω to 301 k Ω100 Ω to 301k Ω± 0.01 %200 Ω to 150 k Ω24 Ω to 301 k Ω-± 05 ppm/K (2)± 0.25 %47 Ω to 150 k Ω10 Ω to 1 M Ω-± 0.1 %47 Ω to 150 k Ω10 Ω to 1 M Ω47 Ω to 301k Ω± 0.05 %100 Ω to 150 k Ω24Ω to 221 k Ω100 Ω to 301k Ω± 0.01 %200 Ω to 150 k Ω24 Ω to 221 k Ω-± 02 ppm/K (3)± 0.25 %100 Ω to 100 k Ω100 Ω to 150 k Ω-± 0.1 %100 Ω to 100 k Ω100 Ω to 150 k Ω-± 0.05 %150 Ω to 100 k Ω150 Ω to 150 k Ω-± 0.01 %200 Ω to 100 k Ω200 Ω to 150 k Ω- For technical questions, contact: ff3cresistors@Document Number: 28726UXA 0204, UXB 0207, UXE 0414Vishay BeyschlagHigh Precision Leaded ResistorsFUNCTIONAL DESCRIPTIONDerating - Precision OperationTemperature RiseDocument Number: 28726For technical questions, contact: ff3cresistors@UXA 0204, UXB 0207, UXE 0414High Precision Leaded ResistorsVishay BeyschlagTESTS AND REQUIREMENTSE ssentially all tests are carried out in accordance with the following specifications:E N 140000/IE C 60115-1, Generic specification (includes tests)E N 140100/IE C 60115-2, Sectional specification (includes schedule for qualification approval)CECC 40101-806, Detail specification (includes schedule for conformance inspection)Most of the components are approved in accordance with the uropean CE CC-system, where applicable. The Test Procedures and Requirements table contains only the most important tests. For the full test schedule refer to the documents listed above. The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5202.The tests are carried out in accordance with IEC 60 068 and under standard atmospheric conditions in accordance withIE C 60068-1, 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower Category Temperature, Upper Category Temperature; damp heat, long term, 56 days) is valid.Unless otherwise specified the following values apply:Temperature: 15 °C to 35 °C Relative humidity: 45 % to 75 %Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).For testing the components are mounted on a test board in accordance with IE C 60115-1, 4.31 unless otherwise specified.In the Test Procedures and Requirements table only the tests and requirements are listed with reference to the relevant clauses of IEC 60115-1 and IEC 60068-2; a short description of the test procedure is also given.TEST PROCEDURES AND REQUIREMENTSIEC 60115-1CLAUSEIEC 60068-2TEST METHODTESTPROCEDUREREQUIREMENTSPERMISSIBLE CHANGE (ΔR )Stability for product types:UXA 0204100 Ω to 100 k Ω22Ω to < 100Ω;> 100 k Ω to 221 k Ω -UXB 0207100 Ω to 250 k Ω40.2Ω to < 100 Ω;> 250k Ω to 301 k Ω10Ω to < 40.2 Ω;> 301 k Ω to 1 M ΩUXE 0414100 Ω to 100 k Ω22Ω to < 100 Ω;> 100k Ω to 511 k Ω-4.5-resistance (ΔR /R )± 0.25 %; ± 0.1 %; ± 0.05 %; ± 0.01 %4.8.4.2-temperature coefficientat 20/LCT/20 °C and 20/UCT/20 °C± 10 ppm/K; ± 05 ppm/K; ± 02 ppm/K4.25.1-enduranceroom temperature;U = orU = U max ;1.5 h on; 0.5 h off 70°C; 2000 h ± (0.05 %R +0.01Ω)± (0.05 %R +0.01Ω)± (0.05 %R +0.01Ω)85°C; 1000 h ± (0.02 %R +0.01Ω)± (0.03 %R +0.01Ω)±(0.04 %R +0.01Ω)85°C; 8000 h± (0.04 %R +0.01Ω)± (0.06 %R +0.01Ω)± (0.08 %R +0.01Ω)P 70 x R For technical questions, contact: ff3cresistors@Document Number: 28726UXA 0204, UXB 0207, UXE 0414Vishay BeyschlagHigh Precision Leaded Resistors4.25.3-endurance atupper category temperature 125°C; 1000 h ± (0.04 % R +0.01Ω)± (0.06 %R +0.01Ω)± (0.08 %R +0.01Ω)4.24 3 (Ca)damp heat,steady state (40± 2)°C; 56days; (93 ± 3) %RH± (0.04 %R +0.01Ω)± (0.05 %R +0.01Ω)± (0.06 %R +0.01Ω)4.23climatic sequence:4.23.22 (Ba)dry heat 125°C; 16h 4.23.330 (Db)damp heat, cyclic55°C; 24h;90% to 100%RH;1 cycle4.23.4 1 (Aa)cold - 55 °C; 2h 4.23.513 (M)low air pressure 8.5kPa;2h;15 °C to 35°C 4.23.630 (Db)damp heat, cyclic55°C; 5days;95% to 100%RH;5 cycles ± (0.04 %R +0.01 Ω)no visible damage± (0.05 %R +0.01Ω)no visible damage± (0.06 %R +0.01Ω)no visible damage4.13-short time overload room temperature;U = 2.5 x or U = 2x U max ; 5 s ± (0.01 %R +0.01Ω)no visible damage ± (0.01 %R +0.01Ω)no visible damage ± (0.02 %R +0.01Ω)no visible damage4.1914 (Na)rapid change of temperature 30minutes at LCT and 30minutes at UCT;5cycles ± (0.01 %R +0.01Ω)no visible damage ± (0.01 %R +0.01Ω)no visible damage ± (0.02 % R +0.01Ω)no visible damage4.2945 (XA)component solvent resistanceisopropyl alcohol + 23 °C; toothbrushmethod marking legible;no visible damage4.18.220 (Tb)resistance to soldering heat unmounted components; (260± 5)°C; (10± 1)s ± (0.01 % R +0.01Ω)no visible damage ± (0.01 %R +0.01Ω)no visible damage ± (0.02 %R +0.01Ω)no visible damage4.1720 (T a)solderability + 235°C; 2 s solderbath methodgood tinning (Š 95 % coverage, no visible damage)TEST PROCEDURES AND REQUIREMENTSIEC 60115-1CLAUSEIEC 60068-2TEST METHODTESTPROCEDUREREQUIREMENTSPERMISSIBLE CHANGE (ΔR )Stability for producttypes:UXA 0204100 Ω to 100 k Ω22Ω to < 100Ω;> 100 k Ω to 221 k Ω -UXB 0207100 Ω to 250 k Ω40.2Ω to < 100 Ω;> 250k Ω to 301 k Ω10Ω to < 40.2 Ω;> 301 k Ω to 1 M ΩUXE 0414100 Ω to 100 k Ω22Ω to < 100 Ω;> 100k Ω to 511 k Ω-P 70 x RDocument Number: 28726For technical questions, contact: ff3cresistors@UXA 0204, UXB 0207, UXE 0414High Precision Leaded ResistorsVishay Beyschlag4.226 (B4)vibration6 h; 10 Hz to 2000 Hz 1.5 mm or 196 m/s 2± (0.01 %R +0.01Ω)± (0.01 %R +0.01Ω)± (0.02 %R +0.01Ω)4.1621 (Ua 1)21 (Ub)21 (Uc)robustness ofterminations tensile, bending andtorsion ± (0.01 %R +0.01Ω)± (0.01 %R +0.01Ω)±(0.02%R +0.01Ω)4.7-voltage proofU RMS = 100 V; 60 sno flashover or breakdownTEST PROCEDURES AND REQUIREMENTSIEC 60115-1CLAUSEIEC 60068-2TEST METHODTESTPROCEDUREREQUIREMENTSPERMISSIBLE CHANGE (ΔR )Stability for product types:UXA 0204100 Ω to 100 k Ω22Ω to < 100Ω;> 100 k Ω to 221 k Ω -UXB 0207100 Ω to 250 k Ω40.2Ω to < 100 Ω;> 250k Ω to 301 k Ω10Ω to < 40.2 Ω;> 301 k Ω to 1 M ΩUXE 0414100 Ω to 100 k Ω22Ω to < 100 Ω;> 100k Ω to 511 k Ω-Legal Disclaimer NoticeVishay Document Number: NoticeSpecifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.。

UXB02070H0CRP00中文资料

For technical questions, contact: ff3cresistors@Document Number: 28726UXA 0204, UXB 0207, UXE 0414Vishay BeyschlagHigh Precision Leaded ResistorsDESCRIPTIONUXA 0204, UXB 0207 and UXE 0414 high precision leaded thin film resistors combine the proven reliability of the professional products with an exceptional level of precision and stability. Therefore they are perfectly suited for applications in the fields of precision test and measuring equipment and particularly for the design of calibration references and standards.FEATURES•Superior thin film technology•Exceptional low TCR: ± 02 ppm/K to ± 10 ppm/K •Super tight tolerance: ± 0.01 % to ± 0.25 %•Exceptional overall stability: class 0.02•Wide resistance range: 22 Ω to 1 M Ω•Lead (Pb)-free solder contacts•Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes•Compatible with “Restriction of the use of Hazardous Substances” (RoHS) directive 2002/95/EC (issue 2004)APPLICATIONS•Precision test and measuring equipment•Design of calibration references and standardsMETRIC SIZEDIN:020*********CECC:ABDTECHNICAL SPECIFICATIONSDESCRIPTION UXA 0204UXB 0207UXE 0414CECC size AB DResistance range 22 Ω to 221 k Ω10 Ω to 1 M Ω22 Ω to 511 k ΩResistance tolerance ± 0.25 %; ± 0.1 %; ± 0.05 %; ± 0.01 %± 0.1 %; ± 0.05 %Temperature coefficient ± 10ppm/K; ± 05ppm/K; ± 02ppm/K ± 10ppm/K; ± 05ppm/KOperation modeprecision precision precision Climatic category (LCT/UCT/days)20/125/5620/125/5620/125/56Rated dissipation:P 850.05W 0.125 W 0.25 W P 700.1 W 0.25W 0.5W Operating voltage, U max AC/DC 200 V 250 V 300 V Film temperature125°C 125°C 125°C Max. resistance change at P 70for resistance range, ΔR /R max., after:100 Ωto 100 k Ω100 Ωto 250 k Ω100 Ωto 100 k Ω2000h≤ 0.05 %≤ 0.05 %≤ 0.05 %Max. resistance change at P 85for resistance range, ΔR /R max., after:100 Ωto 100 k Ω100 Ωto 250 k Ω100 Ωto 100 k Ω1000h ≤ 0.02 %≤ 0.02 %≤ 0.02 %8000h ≤ 0.04 %≤ 0.04 %≤ 0.04 %225000h≤ 0.12 %≤ 0.12 %≤ 0.12 %Specified lifetime225 000h225 000h225 000hPermissible voltage against ambient :1 minute 300V 500V 800V continuous75V 75V 75V Failure rate≤ 0.7 x 10-9/h≤ 0.3 x 10-9/h≤ 0.1 x 10-9/hDocument Number: 28726For technical questions, contact: ff3cresistors@UXA 0204, UXB 0207, UXE 0414High Precision Leaded ResistorsVishay Beyschlag12NC INFORMATIONComponents may be ordered by using either a simple clear text ordering code, see “Type Description and Ordering Code” or Vishay BCcomponents’ unique 12NC.Numeric Ordering Code (12NC)•The resistors have a 12-digit Part Number starting with 2312.•The subsequent 4digits indicate the resistor type,specification and packaging; see the 12NC Part Number table.•The remaining 4digits indicate the resistance value:–The first 3digits indicate the resistance value.–The last digit indicates the resistance decade in accordance with the 12NC Indicating Resistance Decade table.Last Digit of 12NC Indicating Resistance Decade12NC ExampleThe Part Number of a UXA 0204 resistor, value 47 k Ω and TCR 10 with ± 0.1 % tolerance, supplied on bandolier in a box of 1000 units is: 2312 662 34703.Note:(1) Readable 12NC coding of resistance values is restricted to values with three significant digits. For resistance values with more than three significant digits, a non readable sequential number will be issued by the factory for each requested combination of resistance value and tolerance.RESISTANCE DECADELAST DIGIT10 Ωto 99.9 Ω9100 Ωto 999 Ω11 k Ω to 9.99 k Ω210 k Ωto 99.9 k Ω3100k Ω to 999 k Ω412NC PART NUMBER - resistor type and packagingDESCRIPTIONORDERING CODE 2312........BANDOLIER IN BOX BANDOLIER IN BOX BANDOLIER ON REEL BANDOLIER ON REEL BANDOLIER ON REEL TYPETCRTOL.CU 100 units C1 1000 units R1 1000 units R2 2500 units RP 5000 units UXA 0204± 10 ppm/K± 0.25 %562 2....662 2....462 2....--± 0.1 %562 3....662 3....462 3....--± 0.05 %562 4....662 4....462 4....--± 0.01 %562 7....662 7....462 7....--(1)562 91...662 91...462 91...--± 05 ppm/K± 0.25 %563 2....663 2....463 2....--± 0.1 %563 3....663 3....463 3....--± 0.05 %563 4....663 4....463 4....--± 0.01 %563 7....663 7....463 7....--(1)563 91...663 91...463 91...--± 02 ppm/K± 0.25 %564 2....664 2....464 2....--± 0.1 %564 3....664 3....464 3....--± 0.05 %564 4....664 4....464 4....--± 0.01 %564 7....664 7....464 7....--(1)564 91...664 91...464 91...--UXB 0207± 10 ppm/K± 0.25 %572 2....672 2....472 2....-577 2....± 0.1 %572 3....672 3....472 3....-577 3....± 0.05 %572 4....672 4....472 4....-577 4....± 0.01 %572 7....672 7....472 7....-577 7. (1)572 91...672 91...472 91...-577 91...± 05 ppm/K± 0.25 %573 2....673 2....473 2....-578 2....± 0.1 %573 3....673 3....473 3....-578 3....± 0.05 %573 4....673 4....473 4....-578 4....± 0.01 %573 7....673 7....473 7....-578 7. (1)573 91...673 91....473 91...-578 91...± 02 ppm/K± 0.25 %574 2....674 2....474 2....-579 2....± 0.1 %574 3....674 3....474 3....-579 3....± 0.05 %574 4....674 4....474 4....-579 4....± 0.01 %574 7....674 7....474 7....-579 7. (1)574 91...674 91...474 91...-579 91...UXE 0414± 10 ppm/K± 0.1 %592 3....692 3....-597 3....-± 0.05 %592 4....692 4....-597 4....-(1)592 91...692 91...-597 91...-± 05 ppm/K± 0.1 %593 3....693 3....-598 3....-± 0.05 %593 4....693 4....-598 4....-(1)593 91...693 91...-598 91...- For technical questions, contact: ff3cresistors@Document Number: 28726UXA 0204, UXB 0207, UXE 0414Vishay BeyschlagHigh Precision Leaded ResistorsNotes:(1) Please refer to table PACKAGING, see next page.Products can be ordered using either the Product Description or the 12NC. The PART NUMBER is shown to facilitate the introduction of a unified part numbering system.DIMENSIONSPART NUMBER AND PRODUCT DESCRIPTION UX SERIESPart Numbering: UXB02070F1001AC100MODEL/SIZE SPECIAL CHARACTERTCRVALUETOLERANCE PACKAGINGSPECIALUXA0204UXB0207UXE04140 = neutralH = ± 2 ppm/K G = ± 5 ppm/K F = ± 10 ppm/K3 digit value 1 digit multiplier MULTIPLIER 9 = *10-1 2 = *1020 = *100 3 = *1031 = *1014 = *104T = ± 0.01 %A = ± 0.05 %B = ± 0.1 %C = ± 0.25 %C1CU R1R2RPup to 2 digits 00 = standardProduct Description: UXB 0207-10 0.05 % C1 1K0UXB 0207100.05 %C11K0MODEL SIZE TCR TOLERANCE PACKAGING (1)RESIST ANCE VALUEUXA UXB UXE020*********± 2 ppm/K ± 5 ppm/K ± 10 ppm/K± 0.01 %± 0.05 %± 0.1 %± 0.25 %C1CU R1R2RP1K0 = 1.0 k Ω47K = 47 k Ω50R5 = 50.5 ΩDIMENSIONS - leaded resistor types, mass and relevant physical dimensionsTYPE D max (mm)L max (mm)d nom (mm)I min (mm)M min (mm)MASS (mg)UXA 0204 1.6 3.60.529.0 5.0125UXB 0207 2.5 6.30.628.07.5220UXE 04144.011.90.831.015.0750SCRIPT MARKING - printed resistance value and letter coding for TCR and toleranceRESISTANCE VALUETOL.(%)LETTER CODETCR (ppm/K)LETTER CODEClear text code for value± 0.25C ± 10B ± 0.1B ± 05A ± 0.05A ± 02T ± 0.01T−−B 0200F 17UX 00A C 110Document Number: 28726For technical questions, contact: ff3cresistors@UXA 0204, UXB 0207, UXE 0414High Precision Leaded ResistorsVishay BeyschlagNotes:(1) Resistance values to be selected from the E192 series, for other values please contact the factory.(2) TCR 10 and TCR 05 are specified over the temperature range from - 20°C to + 85°C.(3) TCR 02 is specified over the temperature range from 0°C to + 60°C.DESCRIPTIONProduction is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body (85 % Al 2O 3) and conditioned to achieve the desired temperature coefficient. Nickel plated steel termination caps are firmly pressed on the metallized rods.Special laser devices are used repeatedly to achieve the target value by slowly and smoothly cutting a helical groove in the resistive layer without damaging the ceramics. A further conditioning is applied in order to stabilise the trimming result. Connecting wires of electrolytic copper plated with pure tin are welded to the termination caps. The resistors are covered by protective coating designed for electrical, mechanical and climatic protection.The terminations receive a final pure tin on nickel plating. Script marking designates the resistance value plus coded TCR and tolerance.The result of the determined production is verified by an accelerated ageing (burn-in) and extensive testing procedure performed on 100 % of the individual resistors.Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1.ASSEMBLYThe resistors are suitable for processing on automatic insertion equipment and cutting and bending machines.E xcellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry,including alcohols, esters and aqueous solutions. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system.APPROVALSWhere applicable, the resistors are tested in accordance with CECC 40101-806 which refers to EN 60115-1 and EN 140100.Vishay B EYSCHLAG has achieved "Approval of Manufacturer" in accordance with EN 100114-1PACKAGINGMODEL REELBOXBANDOLIER ON REELCODE PIECES/BOXCODE UXA 1000R11001000CU C1UXB 10005000R1RP 1001000CU C1UXE2500R21001000CU C1TEMPERATURE COEFFICIENT AND RESISTANCE RANGEDESCRIPTIONRESISTANCE VALUE (1)TCRTOLERANCE UXA 0204UXB 0207UXE 0414± 10 ppm/K (2)± 0.25 %22 Ω to 221 k Ω10 Ω to 1 M Ω-± 0.1 %43 Ω to 221 k Ω10 Ω to 1 M Ω22 Ω to 511k Ω± 0.05 %100 Ω to 180 k Ω24 Ω to 301 k Ω100 Ω to 301k Ω± 0.01 %200 Ω to 150 k Ω24 Ω to 301 k Ω-± 05 ppm/K (2)± 0.25 %47 Ω to 150 k Ω10 Ω to 1 M Ω-± 0.1 %47 Ω to 150 k Ω10 Ω to 1 M Ω47 Ω to 301k Ω± 0.05 %100 Ω to 150 k Ω24Ω to 221 k Ω100 Ω to 301k Ω± 0.01 %200 Ω to 150 k Ω24 Ω to 221 k Ω-± 02 ppm/K (3)± 0.25 %100 Ω to 100 k Ω100 Ω to 150 k Ω-± 0.1 %100 Ω to 100 k Ω100 Ω to 150 k Ω-± 0.05 %150 Ω to 100 k Ω150 Ω to 150 k Ω-± 0.01 %200 Ω to 100 k Ω200 Ω to 150 k Ω- For technical questions, contact: ff3cresistors@Document Number: 28726UXA 0204, UXB 0207, UXE 0414Vishay BeyschlagHigh Precision Leaded ResistorsFUNCTIONAL DESCRIPTIONDerating - Precision OperationTemperature RiseDocument Number: 28726For technical questions, contact: ff3cresistors@UXA 0204, UXB 0207, UXE 0414High Precision Leaded ResistorsVishay BeyschlagTESTS AND REQUIREMENTSE ssentially all tests are carried out in accordance with the following specifications:E N 140000/IE C 60115-1, Generic specification (includes tests)E N 140100/IE C 60115-2, Sectional specification (includes schedule for qualification approval)CECC 40101-806, Detail specification (includes schedule for conformance inspection)Most of the components are approved in accordance with the uropean CE CC-system, where applicable. The Test Procedures and Requirements table contains only the most important tests. For the full test schedule refer to the documents listed above. The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5202.The tests are carried out in accordance with IEC 60 068 and under standard atmospheric conditions in accordance withIE C 60068-1, 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower Category Temperature, Upper Category Temperature; damp heat, long term, 56 days) is valid.Unless otherwise specified the following values apply:Temperature: 15 °C to 35 °C Relative humidity: 45 % to 75 %Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).For testing the components are mounted on a test board in accordance with IE C 60115-1, 4.31 unless otherwise specified.In the Test Procedures and Requirements table only the tests and requirements are listed with reference to the relevant clauses of IEC 60115-1 and IEC 60068-2; a short description of the test procedure is also given.TEST PROCEDURES AND REQUIREMENTSIEC 60115-1CLAUSEIEC 60068-2TEST METHODTESTPROCEDUREREQUIREMENTSPERMISSIBLE CHANGE (ΔR )Stability for product types:UXA 0204100 Ω to 100 k Ω22Ω to < 100Ω;> 100 k Ω to 221 k Ω -UXB 0207100 Ω to 250 k Ω40.2Ω to < 100 Ω;> 250k Ω to 301 k Ω10Ω to < 40.2 Ω;> 301 k Ω to 1 M ΩUXE 0414100 Ω to 100 k Ω22Ω to < 100 Ω;> 100k Ω to 511 k Ω-4.5-resistance (ΔR /R )± 0.25 %; ± 0.1 %; ± 0.05 %; ± 0.01 %4.8.4.2-temperature coefficientat 20/LCT/20 °C and 20/UCT/20 °C± 10 ppm/K; ± 05 ppm/K; ± 02 ppm/K4.25.1-enduranceroom temperature;U = orU = U max ;1.5 h on; 0.5 h off 70°C; 2000 h ± (0.05 %R +0.01Ω)± (0.05 %R +0.01Ω)± (0.05 %R +0.01Ω)85°C; 1000 h ± (0.02 %R +0.01Ω)± (0.03 %R +0.01Ω)±(0.04 %R +0.01Ω)85°C; 8000 h± (0.04 %R +0.01Ω)± (0.06 %R +0.01Ω)± (0.08 %R +0.01Ω)P 70 x R For technical questions, contact: ff3cresistors@Document Number: 28726UXA 0204, UXB 0207, UXE 0414Vishay BeyschlagHigh Precision Leaded Resistors4.25.3-endurance atupper category temperature 125°C; 1000 h ± (0.04 % R +0.01Ω)± (0.06 %R +0.01Ω)± (0.08 %R +0.01Ω)4.24 3 (Ca)damp heat,steady state (40± 2)°C; 56days; (93 ± 3) %RH± (0.04 %R +0.01Ω)± (0.05 %R +0.01Ω)± (0.06 %R +0.01Ω)4.23climatic sequence:4.23.22 (Ba)dry heat 125°C; 16h 4.23.330 (Db)damp heat, cyclic55°C; 24h;90% to 100%RH;1 cycle4.23.4 1 (Aa)cold - 55 °C; 2h 4.23.513 (M)low air pressure 8.5kPa;2h;15 °C to 35°C 4.23.630 (Db)damp heat, cyclic55°C; 5days;95% to 100%RH;5 cycles ± (0.04 %R +0.01 Ω)no visible damage± (0.05 %R +0.01Ω)no visible damage± (0.06 %R +0.01Ω)no visible damage4.13-short time overload room temperature;U = 2.5 x or U = 2x U max ; 5 s ± (0.01 %R +0.01Ω)no visible damage ± (0.01 %R +0.01Ω)no visible damage ± (0.02 %R +0.01Ω)no visible damage4.1914 (Na)rapid change of temperature 30minutes at LCT and 30minutes at UCT;5cycles ± (0.01 %R +0.01Ω)no visible damage ± (0.01 %R +0.01Ω)no visible damage ± (0.02 % R +0.01Ω)no visible damage4.2945 (XA)component solvent resistanceisopropyl alcohol + 23 °C; toothbrushmethod marking legible;no visible damage4.18.220 (Tb)resistance to soldering heat unmounted components; (260± 5)°C; (10± 1)s ± (0.01 % R +0.01Ω)no visible damage ± (0.01 %R +0.01Ω)no visible damage ± (0.02 %R +0.01Ω)no visible damage4.1720 (T a)solderability + 235°C; 2 s solderbath methodgood tinning (Š 95 % coverage, no visible damage)TEST PROCEDURES AND REQUIREMENTSIEC 60115-1CLAUSEIEC 60068-2TEST METHODTESTPROCEDUREREQUIREMENTSPERMISSIBLE CHANGE (ΔR )Stability for producttypes:UXA 0204100 Ω to 100 k Ω22Ω to < 100Ω;> 100 k Ω to 221 k Ω -UXB 0207100 Ω to 250 k Ω40.2Ω to < 100 Ω;> 250k Ω to 301 k Ω10Ω to < 40.2 Ω;> 301 k Ω to 1 M ΩUXE 0414100 Ω to 100 k Ω22Ω to < 100 Ω;> 100k Ω to 511 k Ω-P 70 x RDocument Number: 28726For technical questions, contact: ff3cresistors@UXA 0204, UXB 0207, UXE 0414High Precision Leaded ResistorsVishay Beyschlag4.226 (B4)vibration6 h; 10 Hz to 2000 Hz 1.5 mm or 196 m/s 2± (0.01 %R +0.01Ω)± (0.01 %R +0.01Ω)± (0.02 %R +0.01Ω)4.1621 (Ua 1)21 (Ub)21 (Uc)robustness ofterminations tensile, bending andtorsion ± (0.01 %R +0.01Ω)± (0.01 %R +0.01Ω)±(0.02%R +0.01Ω)4.7-voltage proofU RMS = 100 V; 60 sno flashover or breakdownTEST PROCEDURES AND REQUIREMENTSIEC 60115-1CLAUSEIEC 60068-2TEST METHODTESTPROCEDUREREQUIREMENTSPERMISSIBLE CHANGE (ΔR )Stability for product types:UXA 0204100 Ω to 100 k Ω22Ω to < 100Ω;> 100 k Ω to 221 k Ω -UXB 0207100 Ω to 250 k Ω40.2Ω to < 100 Ω;> 250k Ω to 301 k Ω10Ω to < 40.2 Ω;> 301 k Ω to 1 M ΩUXE 0414100 Ω to 100 k Ω22Ω to < 100 Ω;> 100k Ω to 511 k Ω-Legal Disclaimer NoticeVishay Document Number: NoticeSpecifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.。

技嘉MW702（简体中文）说明书

一.使用移动设备之前……………………………………………………………………………………………1-1 1.1 认识您的设备………………………………………………………………………………………………………1-1 1.2 特色…………………………………………………………………………………………………………………1-2 1.3 安装电池和SIM卡……………………………………………………………………………………………………1-3 1.4 SIM卡……………………………………………………………………………………………………………… 1-3 1.5 电池…………………………………………………………………………………………………………………1-3 1.6 锁定/解除锁定………………………………………………………………………………………………………1-4 1.7 电源…………………………………………………………………………………………………………………1-5
六. 进行连接……………………………………………………………………………………………………………6-1 6.1 和互联网连接………………………………………………………………………………………………………6-1 6.2 设置GPRS连接………………………………………………………………………………………………………6-1 6.3 启动GPRS连接………………………………………………………………………………………………………6-1 6.4 GPRS自动连接精灵…………………………………………………………………………………………………6-2 6.5 和您的个人计算机连接……………………………………………………………………………………………6-2 6.6 无线蓝牙传输………………………………………………………………………………………………………6-2 6.7 Internet共享…………………………………………………………………………………………………………6-3 6.8 USB……………………………………………………………………………………………………………………6-3

boisb020701说明书

boisb020701说明书
一、产品简介
二、产品特点
2.高性能处理器：产品搭载了高性能处理器，拥有强大的数据处理能力，保证了高质量的音视频播放和流畅的游戏体验。

4.高清屏幕：产品配备高清屏幕，展示出清晰逼真的画面效果。

用户可以在观看视频和玩游戏时享受震撼的视觉体验。

6.强大无线连接：产品支持无线连接功能，用户可以通过Wi-Fi连接互联网，随时获取最新的音乐、电影和游戏资源。

三、使用方法
2.系统操作：在开机后，用户将进入主界面。

通过触摸屏或物理按钮进行各项操作，如打开应用、切换应用、调整音量等。

3.多媒体播放：在主界面上选择“音乐”或“影视”等应用，然后选择想要播放的内容，即可享受音乐、视频等多媒体的快乐。

4.游戏娱乐：在主界面上选择“游戏”应用，然后根据游戏的提示进行操作，可以轻松畅玩各种游戏。

5.存储管理：用户可以在设备中管理存储内容，包括删除、移动和复制等操作，以满足个人需求。

四、维护与注意事项
1.防止撞击：使用过程中请注意避免严重撞击、摔落等操作，以免造成设备损坏。

2.防潮防尘：请避免在潮湿的环境中使用，且在闲置时请将设备放置在干燥、通风的地方。

3.温度适宜：请不要长时间使用设备，以免过热。

工作时的温度范围为5℃至35℃。

4.定期清理：请使用柔软的布擦拭屏幕，定期清理设备表面，确保设备处于最佳工作状态。

5.注意电量：使用时请留意电池电量，及时进行充电以免耗尽。

长时间停用请将设备充电至50%以上后存放。

技嘉x470aorusultragaming说明书

技嘉x470aorusultragaming说明书技嘉X470AORUSULTRAGAMING详细说明书技嘉X470AORUSULTRAGAMING是一款高性能的游戏主板，旨在为玩家提供出色的游戏体验和卓越的性能。

本说明书将详细介绍该主板的各项功能和操作方法，以帮助用户更好地了解和使用该产品。

首先，让我们来了解一下主板的主要特点和规格：1. AMD X470芯片组：该芯片组支持Socket AM4的AMD Ryzen处理器，提供更稳定和高效的性能。

2.支持DDR4内存：主板提供4个DDR4DIMM插槽，支持最高64GB的内存容量。

支持高频率的内存，使系统运行更流畅。

3.双M.2插槽：主板提供两个高速M.2插槽，支持NVMe协议的固态硬盘，大大提升系统的存储性能。

4. 多重显卡支持：主板具有支持AMD CrossFireX技术的多重显卡插槽，为玩家提供更好的图形性能。

5. USB 3.1 Gen 2接口：主板配备了多个USB 3.1 Gen 2接口，可以提供超高速的数据传输速率。

6. Realtek ALC1220音频芯片：主板具有高性能的音频接口，提供卓越的音效。

7. RGB Fusion：主板支持RGB Fusion技术，可以实现多种灯效模式和颜色设置，为玩家提供个性化的灯光效果。

接下来，我们将详细介绍主板的各项功能和操作方法：1.主板安装：首先，确保主板和其他硬件设备的连接正确。

根据说明书上的图示和标识，将处理器、内存、显卡等插入相应的插槽，然后将主板安装到电脑机箱中。

2. BIOS设置：在启动时，按下Del键或者F2键可以进入BIOS设置界面。

在BIOS界面中，可以进行各种参数的调整，如启动顺序、CPU频率、内存频率等。

3.内存安装：根据需求，选择合适的DDR4内存条，然后插入相应的插槽中。

注意正确安装内存条，确保插槽插入到位并固定好。

4.显卡安装：根据需求，选择合适的显卡，并插入相应的插槽中。

boisb020701说明书

boisb020701说明书本说明书，包含内容：【产品介绍】本产品采用双路智能控制器，可独立连接电脑或PC主机，可通过软件自定义配置所需的功能。

【产品性能】本产品采用高品质的RGBW (RS232)接口信号处理芯片，具有极强的抗干扰能力；采用高性能的电源管理芯片和独立的电池供电模块；采用数字/模拟双信号输出；拥有四路RGBW (RS232)信号线；可连接电脑和PC主机。

【产品特点】该智能控制器采用三颗ARM处理器和独立双通道RGB (RGB)设计；控制精度高。

具有高解析度(<1 kHz)。

【产品使用】本产品采用最新数字控制技术（USB2.0技术）。

1.本产品具有USB2.0接口，可将产品主机及RGBW (RGB)信号线连接至电脑主机（也可将主机与产品连接，软件自定义配置）。

计算机主机（软件为: Fidelity Internet)上配置RGBW (RS232)接口的控制中心和供电模块。

显示器上配置RGBW (RGB)接口的控制中心和供电模块。

如电脑主机支持双输入，双模双输出（可将两个输入分别输出至两个不同电脑）。

显示器的显示模式为：单声道。

（可配置屏幕自定义）双声道。

电脑主机最大支持4路RGBW (RGB)信号线；两个最大输入信号线径:1 mm (可选用）。

可提供最大4路RGBW (RGB)信号线长度;(请按系统自定义功能配置）最大RGBW (RGB)数据线长度;4路RGBW (RGB)数据线长度可供选择。

2.本产品具有USB2.0接口，可将电脑主机的RGBW (RGB)信号线连接至该产品主机上；该产品具有音频输出接口，可将音频信号通过音频线直接发送至PC上；本产品具有USB1.0接口，可将该产品主机的RGBW (RGB)信号线连接至该产品主机上；该产品具有电源输入接口，可将电源输入至主机上。

3.将本产品主机电脑上连接至主板的RGBW (RGB)信号线连接至该产品主机上后。

请检查一下本产品主机上的电源指示灯。

繁体中文使用手册SUMO 系列

目錄1. 機殼各部位介紹41-1 本體內部結構介紹41-2前後左側板結構介紹52. 特色介紹63. 規格介紹74. 安裝介紹84-1 電源供應器的安裝84-2 主機板安裝84-3 介面卡安裝84-4 前置面板I/O埠安裝94-5風扇電源安裝104-6 5.25吋前置設備安裝104-7 3.5吋前置設備安裝104-8 內置硬碟設備安裝104-9 DIY前置投射燈設備114-10 安全鎖使用114-11 腳座使用114-12 水冷系統支援114-13 建議散熱系統搭配113繁體中文1. 機殼各部位介紹1-1本體內部結構介紹1) 電源供應器安裝區2) PCI免工具安裝卡勾3) 主機板 / 板卡安裝區4) 5.25吋前置設備安裝區5) 3.5吋前置設備安裝區6) 內置3.5吋硬碟安裝區7) 腳座8) 工具盒a. SUMO 4192 / SUMO 4198 主機板固定銅柱 x 9 /SUMO 5115 主機板固定銅柱 x 12b. 電源延長線 x 2c. 固定硬碟滑軌 x 10d. 鑰匙 x 2e. 束線夾 x 2f. SUMO 4192 / SUMO 4198 主機板固定螺絲 x 9 /SUMO 5115 主機板固定螺絲 x 12g. 電源供應器固定螺絲 x 4h. DIY 投射空白透明擋板 x 1 ( 出貨已安裝 GIGABYTE 擋板 )9) 前置線材組a. USB 2.0b. AUDIOc. IEEE 1394d. 前/後風扇整合 3-Pin 電源e. 電源LED 4-Pin 電源f. 前投射燈 4-Pin 電源g. 基本開關燈訊控制線材4繁體中文1-2 前後左側板結構介紹a) 左側板a-1 左側板a-2 側板開關把手a-3 安全鎖a-4 透明 + 鐵網側板 (僅限於SUMO 4198 / SUMO 5115)SUMO 4192 透明側板 (GZ-FS1CCA-ATS/ATB)SUMO 4192 鐵網側板 (GZ-FS1CCAANS/ANB)b) 後面板b-1 後雙風扇b-2 水管出口c) 前面板c-1 前面板c-2 安全鎖c-3 電源 / 重開機開關, 前置 I/Oc-4 投影燈5繁體中文2. 特色介紹- 全新升級超大容量 ( 僅限於 SUMO 5115 )加大的機身，方便安裝與維修，支援SLI、Cross Fire Dual/Quad多顯示卡，並支援12” x 13”主機板。

朗科酷贝 P200 说明书

19
右边 1 9 、耳机插孔 20 、音频线插孔
4
正面
18 20
5 6 7 8 9 10
11
12 13 14 15 16
背面
22 21
4 、挂绳孔 8 、MIC 12、音量 + 键 16、音量 - 键
5、BACKUP 键 9、FM OUT 键 13 、OK 键
6、BACK 键 10、REPEAT 键 14、LED 指示灯
传输文件
将 P200 与电脑连接。连接成功后，P200 的显示屏上显示连机画面。 Window s 98/Me/2000/XP/Server 2003：在“我的电脑”里出现两个新的“可移动磁盘”图标（图 2.1），第一个图标代表 P200，第二个图标代表插在 P200 中的 SD/MMC 卡。若未插入 SD/MMC 卡，则第二个图标代表的磁盘不可用。
在电脑上的使用．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 5
Windows 98 驱动的安装．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 5 传输文件．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 6 安全拔出．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 7
l
本用户手册中提及的 Window s 98 系指 Window s 98 第一版和第二版。
酷贝 TM P2 00
目录
功能操作．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 13
电影播放．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 14

UXB02070H4TCu00中文资料

USB2.0 HUB 控制器集成电路 USB 2.0 HIGH SPEED 4-PORT HUB C

柔性检查作用域套件-USB 产品说明书

29400资料

TA102系列双USB充电端口商品说明书

X02xxxN中文资料

PLM20K44产品说明书

Moxa UPort 404 407 4和7口工业级USB端口扩展器说明说明书

松下投影机产品说明

HP-UX 10.20 用户指南说明书

UJA1023T中文资料

SBR20U100CT中文资料

USB 2.0 薄型扩展板说明书

UXB02070H3CC100中文资料

UXB02070H0CRP00中文资料

技嘉MW702（简体中文）说明书

boisb020701说明书

技嘉x470aorusultragaming说明书

boisb020701说明书

繁体中文使用手册SUMO 系列

朗科 酷贝 P200 说明书

朗科酷贝 P200 说明书