快速外文文献翻译

合集下载

外文文献及翻译

外文文献及翻译

外文文献原稿和译文原稿DATABASEA database may be defined as a collection interrelated data store together with as little redundancy as possible to serve one or more applications in an optimal fashion .the data are stored so that they are independent of programs which use the data .A common and controlled approach is used in adding new data and in modifying and retrieving existing data within the data base .One system is said to contain a collection of database if they are entirely separate in structure .A database may be designed for batch processing , real-time processing ,or in-line processing .A data base system involves application program, DBMS, and database.THE INTRODUCTION TO DATABASE MANAGEMENT SYSTEMSThe term database is often to describe a collection of related files that is organized into an integrated structure that provides different people varied access to the same data. In many cases this resource is located in different files in different departments throughout the organization, often known only to the individuals who work with their specific portion of the total information. In these cases, the potential value of the information goes unrealized because a person in other departments who may need it does not know it or it cannot be accessed efficiently. In an attempt to organize their information resources and provide for timely and efficient access, many companies have implemented databases.A database is a collection of related data. By data, we mean known facts that can be recorded and that have implicit meaning. For example, the names, telephone numbers, and addresses of all the people you know. You may have recorded this data in an indexed address book, or you may have stored it on a diskette using a personalcomputer and software such as DBASE Ⅲor Lotus 1-2-3. This is a collection of related data with an implicit meaning and hence is a database.The above definition of database is quite general. For example, we may consider the collection of words that made up this page of text to be usually more restricted. A database has the following implicit properties:● A database is a logically coherent collection of data with some inherent meaning. A random assortment of data cannot be referred to as a database.● A database is designed, built, and populated with data for a specific purpose. It has an intended group of user and some preconceived applications in which these users are interested.● A database represents some aspect of the real world, sometimes called the miniworld. Changes to the miniworld are reflected in the database.In other words, a database has some source from which data are derived, some degree of interaction with events in the real world, and an audience that is actively interested in the contents of the database.A database management system (DBMS) is composed of three major parts: (1) a storage subsystem that stores and retrieves data in files; (2)a modeling and manipulation subsystem that provides the means with which to organize the data and to add, delete, maintain, and update the data; and (3) an interface between the DBMS and its users. Several major trends are emerging that enhance the value and usefulness of database management systems.●Managers who require more up-to-date information to make effective decisions.●Customers who demand increasingly sophisticated information services and more current information about the status of their orders, invoices, and accounts.●Users who find that they can develop custom applications with database systems in a fraction of the time it takes to use traditional programming languages.●Organizations that discover information has a strategic value; they utilize their database systems to gain an edge over their competitors.A DBMS can organize, process, and present selected data elements from the database. This capability enables decision makers to search, probe, and query database contents in order to extract answers to nonrecurring and unplanned questions that aren’t available in regular reports. These questions might initially be vague and/or p oorly defined, but people can “browse” through the database until they have the needed information. In short, the DBMS will “mange” the stored data items and assemble the needed items from the common database in response to the queries of those who aren’t programmers. In a file-oriented system, user needing special information may communicate their needs to a programmer, who, when time permits, will write one or more programs to extract the data and prepare the information. The availability of a DBMS, however, offers users a much faster alternative communications path.DATABASE QUERYIf the DBMS provides a way to interactively enter and update the database ,as well as interrogate it ,this capability allows for managing personal database. However, it does not automatically leave an audit trail of actions and does not provide the kinds of controls necessary in a multi-user organization .There controls are only available when a set of application programs is customized for each data entry and updating function.Software for personal computers that perform some of the DBMS functions has been very popular .Individuals for personal information storage and processing intended personal computers for us .Small enterprises, professionals like doctors, architects, engineers, lawyers and so on have also used these machines extensively. By the nature of intended usage ,database system on there machines are except from several of the requirements of full-fledged database systems. Since data sharing is not intended, concurrent operations even less so ,the software can be less complex .Security and integrity maintenance are de-emphasized or absent .as data volumes will be small, performance efficiency is also less important .In fact, the only aspect of a database system that is important is data independence. Data independence ,as stated earlier ,means that application programs and user queries need not recognize physical organization of data on secondary storage. The importance of this aspect , particularly for the personal computer user ,is that this greatly simplifies database usage . The user can store ,access and manipulate data at ahigh level (close to the application)and be totally shielded from the low level (close to the machine )details of data organization.DBMS STRUCTURING TECHNIQUESSpatial data management has been an active area of research in the database field for two decades ,with much of the research being focused on developing data structures for storing and indexing spatial data .however, no commercial database system provides facilities for directly de fining and storing spatial data ,and formulating queries based on research conditions on spatial data.There are two components to data management: history data management and version management .Both have been the subjects of research for over a decade. The troublesome aspect of temporal data management is that the boundary between applications and database systems has not been clearly drawn. Specifically, it is not clear how much of the typical semantics and facilities of temporal data management can and should be directly incorporated in a database system, and how much should be left to applications and users. In this section, we will provide a list of short-term research issues that should be examined to shed light on this fundamental question.The focus of research into history data management has been on defining the semantics of time and time interval, and issues related to understanding the semantics of queries and updates against history data stored in an attribute of a record. Typically, in the context of relational databases ,a temporal attribute is defined to hold a sequence of history data for the attribute. A history data consists of a data item and a time interval for which the data item is valid. A query may then be issued to retrieve history data for a specified time interval for the temporal attribute. The mechanism for supporting temporal attributes is to that for supporting set-valued attributes in a database system, such as UniSQL.In the absence of a support for temporal attributes, application developers who need to model and history data have simply simulated temporal attributes by creating attribute for the time interval ,along with the “temporal” attribute. This of course may result in duplication of records in a table, and more complicated search predicates in queries. The one necessary topic of research in history data management is to quantitatively establish the performance (and even productivity) differences betweenusing a database system that directly supports attributes and using a conventional database system that does not support either the set-valued attributes or temporal attributes.Data security, integrity, and independenceData security prevents unauthorized users from viewing or updating the database. Using passwords, users are allowed access to the entire database of the database, called subschemas. For example, an employee database can contain all the data about an individual employee, but one group of users may be authorized to view only payroll data, while others are allowed access to only work history and medical data.Data integrity refers to the accuracy, correctness, or validity of the data in the database. In a database system, data integrity means safeguarding the data against invalid alteration or destruction. In large on-line database system, data integrity becomes a more severe problem and two additional complications arise. The first has to do with many users accessing the database concurrently. For example, if thousands of travel agents book the same seat on the same flight, the first agent’s booking will be lost. In such cases the technique of locking the record or field provides the means for preventing one user from accessing a record while another user is updating the same record.The second complication relates to hardware, software or human error during the course of processing and involves database transaction which is a group of database modifications treated as a single unit. For example, an agent booking an airline reservation involves several database updates (i.e., adding the passenger’s name and address and updating the seats-available field), which comprise a single transaction. The database transaction is not considered to be completed until all updates have been completed; otherwise, none of the updates will be allowed to take place.An important point about database systems is that the database should exist independently of any of the specific applications. Traditional data processing applications are data dependent.When a DMBS is used, the detailed knowledge of the physical organization of the data does not have to be built into every application program. The application program asks the DBMS for data by field name, for example, a coded representationof “give me customer name and balance due” would be sent to the DBMS. Without a DBMS the programmer must reserve space for the full structure of the record in the program. Any change in data structure requires changes in all the applications programs.Data Base Management System (DBMS)The system software package that handles the difficult tasks associated with creating ,accessing and maintaining data base records is called a data base management system (DBMS). A DBMS will usually be handing multiple data calls concurrently.It must organize its system buffers so that different data operations can be in process together .It provides a data definition language to specify the conceptual schema and most likely ,some of the details regarding the implementation of the conceptual schema by the physical schema.The data definition language is a high-level language, enabling one to describe the conceptual schema in terms of a “data model “.At the present time ,there are four underling structures for database management systems. They are :List structures.Relational structures.Hierarchical (tree) structures.Network structures.Management Information System(MIS)An MIS can be defined as a network of computer-based data processing procedures developed in an organization and integrated as necessary with manual and other procedures for the purpose of providing timely and effective information to support decision making and other necessary management functions.One of the most difficult tasks of the MIS designer is to develop the information flow needed to support decision making .Generally speaking ,much of the information needed by managers who occupy different levels and who have different levels and have different responsibilities is obtained from a collection of exiting information system (or subsystems)Structure Query Language (SQL)SQL is a data base processing language endorsed by the American NationalStandards Institute. It is rapidly becoming the standard query language for accessing data on relational databases .With its simple ,powerful syntax ,SQL represents a great progress in database access for all levels of management and computing professionals.SQL falls into two forms : interactive SQL and embedded SQL. Embedded SQL usage is near to traditional programming in third generation languages .It is the interactive use of SQL that makes it most applicable for the rapid answering of ad hoc queries .With an interactive SQL query you just type in a few lines of SQL and you get the database response immediately on the screen.译文数据库数据库可以被定义为一个相互联系的数据库存储的集合。

外文文献及翻译

外文文献及翻译

外文文献及翻译1. 文献:"The Effects of Exercise on Mental Health"翻译:运动对心理健康的影响Abstract: This article explores the effects of exercise on mental health. The author discusses various studies that have been conducted on this topic, and presents evidence to support the claim that exercise can have positive impacts on mental well-being. The article also examines the mechanisms through which exercise affects mental health, such as the release of endorphins and the reduction of stress hormones. Overall, the author concludes that exercise is an effective strategy for improving mental health and recommends incorporating physical activity into daily routines.摘要:本文探讨了运动对心理健康的影响。

作者讨论了在这个主题上进行的各种研究,并提出证据支持运动对心理健康有积极影响的观点。

该文章还探讨了运动如何影响心理健康的机制,如内啡肽的释放和压力激素的减少。

总的来说,作者得出结论,运动是改善心理健康的有效策略,并建议将体育活动纳入日常生活。

2. 文献: "The Benefits of Bilingualism"翻译:双语能力的好处Abstract: This paper examines the benefits of bilingualism. The author presents research findings that demonstrate the cognitiveadvantages of being bilingual, such as enhanced problem-solving skills and improved attention control. The article also explores the social and cultural benefits of bilingualism, such as increased cultural awareness and the ability to communicate with people from different backgrounds. Additionally, the author discusses the positive effects of bilingualism on mental health, highlighting its role in delaying the onset of cognitive decline and in providing a buffer against age-related memory loss. Overall, the author concludes that bilingualism offers a range of advantages and recommends promoting bilingual education and language learning. 摘要:本文研究了双语能力的好处。

外文文献怎么翻译

外文文献怎么翻译

外文文献的翻译方法和技巧在科学研究领域,阅读和理解外文文献是非常重要的,因为这些文献包含了世界各地研究者的最新成果和观点。

然而,由于语言障碍,许多人可能觉得翻译外文文献是一项困难的任务。

本文将介绍一些有效的翻译方法和技巧,帮助读者更好地理解和翻译外文文献。

选择合适的翻译工具在翻译外文文献时,选择合适的工具是非常重要的。

一些常见的翻译工具包括在线翻译网站和翻译App。

这些工具可以帮助读者快速翻译文献,但需要注意的是,这些工具可能存在一定的翻译误差,因此在使用时要注意核对翻译结果。

保持原文的风格和语气在翻译外文文献时,要尽可能保持原文的风格和语气。

这样可以更好地传达原作者的意图和思想。

在翻译过程中,读者可以使用词典等工具帮助理解原文中的专业术语和文化背景,以确保翻译的准确性和通顺性。

注意语法和语法结构另一个翻译外文文献的重要方面是注意语法和语法结构。

外文文献往往使用复杂的句子结构和语法规则,因此在翻译时要保持句子的逻辑和结构。

正确理解原文中的句子结构和语法规则,可以帮助读者更好地翻译文献并消除歧义。

查找背景知识和参考资料翻译外文文献时,有时可能会遇到一些专业术语和概念,读者不熟悉。

在这种情况下,建议读者查找相关背景知识和参考资料,帮助理解原文中的内容。

这样不仅可以提高翻译的准确性,还可以扩展读者的知识面。

结语总的来说,翻译外文文献是一项需要一定技巧和耐心的工作。

通过选择合适的翻译工具、保持原文的风格和语气、注意语法和语法结构、查找背景知识和参考资料,读者可以更好地理解和翻译外文文献。

希望本文介绍的方法和技巧对读者有所帮助。

机器人外文翻译文献翻译 中英文翻译

机器人外文翻译文献翻译 中英文翻译

外文翻译外文资料:RobotsFirst, I explain the background robots, robot technology development. It should be said it is a common scientific and technological development of a comprehensive results, for the socio-economic development of a significant impact on a science and technology. It attributed the development of all countries in the Second World War to strengthen the economic input on strengthening the country's economic development. But they also demand the development of the productive forces the inevitable result of human development itself is the inevitable result then with the development of humanity, people constantly discuss the natural process, in understanding and reconstructing the natural process, people need to be able to liberate a slave. So this is the slave people to be able to replace the complex and engaged in heavy manual labor, People do not realize right up to the world's understanding and transformation of this technology as well as people in the development process of an objective need. Robots are three stages of development, in other words, we are accustomed to regarding robots are divided into three categories. is a first-generation robots, also known as teach-type robot, it is through a computer, to control over one of a mechanical degrees of freedom Through teaching and information stored procedures, working hours to read out information, and then issued a directive so the robot can repeat according to the people at that time said the results show this kind of movement again, For example, the car spot welding robots, only to put this spot welding process, after teaching, and it is always a repeat of a work It has the external environment is no perception that the force manipulation of the size of the work piece there does not exist, welding 0S It does not know, then this fact from the first generation robot, it will exist this shortcoming, it in the 20th century, the late 1970s, people started to study the second-generation robot, called Robot with the feeling that This feeling with the robot is similar in function of a certain feeling, forinstance, force and touch, slipping, visual, hearing and who is analogous to that with all kinds of feelings, say in a robot grasping objects, In fact, it can be the size of feeling out, it can through visual, to be able to feel and identify its shape, size, color Grasping an egg, it adopted a acumen, aware of its power and the size of the slide. Third-generation robots, we were a robotics ideal pursued by the most advanced stage, called intelligent robots, So long as tell it what to do, not how to tell it to do, it will be able to complete the campaign, thinking and perception of this man-machine communication function and function Well, this current development or relative is in a smart part of the concept and meaning But the real significance of the integrity of this intelligent robot did not actually exist, but as we continued the development of science and technology, the concept of intelligent increasingly rich, it grows ever wider connotations.Now, I would like to briefly outline some of the industrial robot situation. So far, the industrial robot is the most mature and widely used category of a robot, now the world's total sales of 1.1 million Taiwan, which is the 1999 statistics, however, 1.1 million in Taiwan have been using the equipment is 75 million, this volume is not small. Overall, the Japanese industrial robots in this one, is the first of the robots to become the Kingdom, the United States have developed rapidly. Newly installed in several areas of Taiwan, which already exceeds Japan, China has only just begun to enter the stage of industrialization, has developed a variety of industrial robot prototype and small batch has been used in production.Spot welding robot is the auto production line, improve production efficiency and raise the quality of welding car, reduce the labor intensity of a robot. It is characterized by two pairs of robots for spot welding of steel plate, bearing a great need for the welding tongs, general in dozens of kilograms or more, then its speed in meters per second a 5-2 meter of such high-speed movement. So it is generally five to six degrees of freedom, load 30 to 120 kilograms, the great space, probably expected that the work of a spherical space, a high velocity, the concept of freedom, that is to say, Movement is relatively independent of the number of components, the equivalent of our body, waist is a rotary degree of freedom We have to be able to hold his arm, Arm can be bent, then this three degrees of freedom, Meanwhile there is a wristposture adjustment to the use of the three autonomy, the general robot has six degrees of freedom. We will be able to space the three locations, three postures, the robot fully achieved, and of course we have less than six degrees of freedom. Have more than six degrees of freedom robot, in different occasions the need to configure.The second category of service robots, with the development of industrialization, especially in the past decade, Robot development in the areas of application are continuously expanding, and now a very important characteristic, as we all know, Robot has gradually shifted from manufacturing to non-manufacturing and service industries, we are talking about the car manufacturer belonging to the manufacturing industry, However, the services sector including cleaning, refueling, rescue, rescue, relief, etc. These belong to the non-manufacturing industries and service industries, so here is compared with the industrial robot, it is a very important difference. It is primarily a mobile platform, it can move to sports, there are some arms operate, also installed some as a force sensor and visual sensors, ultrasonic ranging sensors, etc. It’s surrounding environment for the conduct of identification, to determine its campaign to complete some work, this is service robot’s one of the basic characteristics.For example, domestic robot is mainly embodied in the example of some of the carpets and flooring it to the regular cleaning and vacuuming. The robot it is very meaningful, it has sensors, it can furniture and people can identify, It automatically according to a law put to the ground under the road all cleaned up. This is also the home of some robot performance.The medical robots, nearly five years of relatively rapid development of new application areas. If people in the course of an operation, doctors surgery, is a fatigue, and the other manually operated accuracy is limited. Some universities in Germany, which, facing the spine, lumbar disc disease, the identification, can automatically use the robot-aided positioning, operation and surgery Like the United States have been more than 1,000 cases of human eyeball robot surgery, the robot, also including remote-controlled approach, the right of such gastrointestinal surgery, we see on the television inside. a manipulator, about the thickness fingers such a manipulator, inserted through the abdominal viscera, people on the screen operating the machines hand, it also used the method of laser lesion laser treatment, this is the case, peoplewould not have a very big damage to the human body.In reality, this right as a human liberation is a very good robots, medical robots it is very complex, while it is fully automated to complete all the work, there are difficulties, and generally are people to participate. This is America, the development of such a surgery Lin Bai an example, through the screen, through a remote control operator to control another manipulator, through the realization of the right abdominal surgery A few years ago our country the exhibition, the United States has been successful in achieving the right to the heart valve surgery and bypass surgery. This robot has in the area, caused a great sensation, but also, AESOP's surgical robot, In fact, it through some equipment to some of the lesions inspections, through a manipulator can be achieved on some parts of the operation Also including remotely operated manipulator, and many doctors are able to participate in the robot under surgery Robot doctor to include doctors with pliers, tweezers or a knife to replace the nurses, while lighting automatically to the doctor's movements linked, the doctor hands off, lighting went off, This is very good, a doctor's assistant.Robot is mankind's right-hand man; friendly coexistence can be a reliable friend. In future, we will see and there will be a robot space inside, as a mutual aide and friend. Robots will create the jobs issue. We believe that there would not be a "robot appointment of workers being laid off" situation, because people with the development of society, In fact the people from the heavy physical and dangerous environment liberated, so that people have a better position to work, to create a better spiritual wealth and cultural wealth.译文资料:机器人首先我介绍一下机器人产生的背景,机器人技术的发展,它应该说是一个科学技术发展共同的一个综合性的结果,同时,为社会经济发展产生了一个重大影响的一门科学技术,它的发展归功于在第二次世界大战中各国加强了经济的投入,就加强了本国的经济的发展。

市场调研方法外文文献及翻译

市场调研方法外文文献及翻译

市场调研方法外文文献及翻译1. Market Research Methods: Incorporating Social Media into Traditional Approaches文章介绍了如何在市场调研中运用社交媒体,以帮助企业更好地了解消费者。

研究人员将社交媒体与传统的定量调研和定性调研相结合,以获得更全面的信息。

通过采集社交媒体的数据分析消费者的行为和偏好,以及对产品或服务的反馈意见。

2. Using Eye Tracking in Market Research: A Guide to Best Practices该文献介绍了视觉追踪技术在市场调研中的应用。

作者指出,视觉追踪技术可以帮助研究人员理解消费者在浏览产品或服务时的注意力分配和行为模式。

文章介绍了适用于市场调研的视觉追踪应用程序的最佳实践和测试方法。

3. Conjoint Analysis in Marketing: New Developments with Implications for Research and Practice这篇文章介绍了一种被称为 "共轭分析" 的调研方法,该方法可以帮助研究人员了解消费者在购买某种产品或服务时的偏好和决策过程。

文献称,共轭分析已经成为市场营销领域最为普遍的工具之一。

文章还介绍了最新的研究和在实践中的应用,并探讨了一些特定情况下共轭分析的限制。

4. Qualitative Market Research: An International Journal这个杂志专注于定性市场调研方法。

它包括与确定消费者需求、分析竞争对手、建立品牌等相关的研究。

文章强调定性市场调研可以提供深入的见解和对产品或服务的更清晰的理解,帮助企业做出更明智的营销和业务决策。

每一期都包括来自该领域的专家的文章,并提供案例研究和最佳实践。

5. Use of Artificial Intelligence Techniques in Market Research: A Review该文献介绍了如何使用人工智能技术进行市场调研。

外文文献查找方法及翻译要求

外文文献查找方法及翻译要求

文献查找:根据自己课题到知网或类似的数据库网站查找,有相关英文文章可以进行下载之后翻译。

如果不能下载,网站的中英文摘要一般都可以看到,根据英文关键词到谷歌搜索里面搜相关的英文文章。

要求的翻译原文不一定是专业的科技文章,只要内容相关,难度跟篇幅合适都可以拿来用。

如果想翻译专业的英文文献,可以通过谷歌的学术搜索网站/schhp?hl=zh-CN,给出的链接比较多,多数是链接到数据库上,没有账号不能下载,但是有些时候搜索出来的条目会有PDF链接,直接点击就能下载下来。

还可以通过维基百科查找相关词条的英文解释,/wiki/Main_Page,但无论英文还是中文都要符合模板中的格式要求,如果英文原文不能编辑,可以不作处理。

英译中:翻译一段检查一段,中文语言一定要通顺,不要有漏译。

不知道的单词一定要查,不要猜。

另一个是,同一个单词在文章里多次出现,每次翻译的时候都要用同样的单词翻译,不能原文同一个单词,在译文里出现的时候是不同的单词。

格式和原文要完全一样,原文有表格,就在译文里也画表格,原文是图片,译文也是图片,原文图片里文字的位置和译文图片里文字的位置要一致。

还有,整个文章统一字体。

查词顺序:先查英语国语字典或者用GOOGLE英文网页,理解英文单词的意思,然后用翻译软件英译中翻译,用翻译软件翻译出来的中文单词,用百度查中文单词的意思,如果查到的中文单词的意思和英语国语字典或者用GOOGLE英文网页的英文单词的解释是一致,翻译软件翻译的是正确的,如果不一致,翻译软件翻译的是错的!翻译工具:1) 在线词典有道词典:/爱词霸:/responsibly/用爱词霸的词典选项。

注:以上两个在线词典的准确率相对较高,可用于查词组译法,灵格斯字典,360上下载,到软件管家里找就可以,这里技术类名词多一些。

爱词霸英中互译翻译软件:/尽量不使用GOOGLE翻译软件。

可参考:GOOGLE翻译软件: /#ja|zh-CN|%0D%0A GOOGLE翻译软件总有翻译错的时候,所以,用GOOGLE翻译软件要注意!牛津字典,或者英语国语词典,灵格斯字典下载一个,自己下载一个吧!注意!!必须有英语国语词典,网上的!。

外文文献及翻译

外文文献及翻译

Yunnan Ethnic pattern in Packaging DesignAbstract: Art is a folk Mother of the arts,is the source of the new art, From which to draw a strong tradition of high—grade Nutrition。

The persons belonging to national folk arts Ethnic patterns,are folk arts Intraoperative a gem, its development Research,and with the means of modern art,art wind Grid,professional skills combine to form a unique Style and features a modern design There are important applications,this paper focuses on Minority Folk pattern in modern packaging design Meter applications are discussed.Keywords: Yunnan Ethnic. Pattern。

Packaging Design.IntroductionYunnan is a multi-ethnic province, Here multiply survive the Han, Yi, Bai More than twenty families, Zhuang, Miao, Dai, etc。

Nation. Long history of various ethnic groups in Yunnan Province, the source is far Long, creating a rich and colorful Folk art。

怎么翻译外文文献

怎么翻译外文文献

怎么翻译外文文献
翻译外文文献的方法和步骤可以总结为以下七个步骤:
1. 阅读全文:在开始翻译之前,先通读一遍外文文献,了解主要内容和结构。

2. 理解上下文:将外文文献的上下文理解清楚,包括作者所表达的意思、目的和主题。

3. 提取关键信息:根据主题和目的,提取出自己需要的关键信息,例如数据、结论或主要观点。

4. 查找术语和专业词汇:在翻译过程中,遇到不熟悉的术语和专业词汇时,可以借助词典、学术论坛或专业资源进行查找。

5. 构建句子结构:根据源文档的语法和结构,构建出准确和流畅的句子,确保翻译的准确性和可理解性。

6. 避免直译:尽量避免直译源文档,而是根据目标语言和文化背景,进行合适的转换和调整。

7. 校对和编辑:完成翻译后,进行校对和编辑,确保翻译的准确性和流畅性,并与原文对照,检查漏译或错误。

在翻译外文文献时,为了保证翻译的准确性和专业性,最好选择具备相关背景知识的翻译者或专业翻译团队。

另外,翻译过程中可以借助一些翻译工具和资源,例如在线翻译软件、术语
词典或翻译论坛,提高翻译效率和准确度。

同时,保持对源文档的敬意和尊重,尽量保持原文的风格和质感。

论文外文文献翻译

论文外文文献翻译

论文外文文献翻译以下是一篇700字左右的论文外文文献翻译:原文题目:The Role of Artificial Intelligence in Medical Diagnostics: A Review原文摘要:In recent years, there has been a growing interest in the use of artificial intelligence (AI) in the field of medical diagnostics. AI has the potential to improve the accuracy and efficiency of medical diagnoses, and can assist clinicians in making treatment decisions. This review aims to examine the current state of AI in medical diagnostics, and discuss its advantages and limitations. Several AI techniques, including machine learning, deep learning, and natural language processing, are discussed. The review also examines the ethical and legal considerations associated with the use of AI in medical diagnostics. Overall, AI has shown great promise in improving medical diagnostics, but further research is needed to fully understand its potential benefits and limitations.AI在医学诊断中发挥的作用:一项综述近年来,人工智能(AI)在医学诊断领域的应用引起了越来越多的关注。

五分钟搞定5000字-外文文献翻译

五分钟搞定5000字-外文文献翻译

五分钟搞定5000字-外文文献翻译在科研过程中阅读翻译外文文献是一个非常重要的环节,许多领域高水平的文献都是外文文献,借鉴一些外文文献翻译的经验是非常必要的。

由于特殊原因我翻译外文文献的机会比较多,慢慢地就发现了外文文献翻译过程中的三大利器:Google“翻译”频道、金山词霸(完整版本)和CNKI“翻译助手"。

具体操作过程如下:1.先打开金山词霸自动取词功能,然后阅读文献;2.遇到无法理解的长句时,可以交给Google处理,处理后的结果猛一看,不堪入目,可是经过大脑的再处理后句子的意思基本就明了了;3.如果通过Google仍然无法理解,感觉就是不同,那肯定是对其中某个“常用单词”理解有误,因为某些单词看似很简单,但是在文献中有特殊的意思,这时就可以通过CNKI的“翻译助手”来查询相关单词的意思,由于CNKI的单词意思都是来源与大量的文献,所以它的吻合率很高。

另外,在翻译过程中最好以“段落”或者“长句”作为翻译的基本单位,这样才不会造成“只见树木,不见森林”的误导。

注:1、Google翻译:/language_tools google,众所周知,谷歌里面的英文文献和资料还算是比较详实的。

我利用它是这样的。

一方面可以用它查询英文论文,当然这方面的帖子很多,大家可以搜索,在此不赘述。

回到我自己说的翻译上来。

下面给大家举个例子来说明如何用吧比如说“电磁感应透明效应”这个词汇你不知道他怎么翻译,首先你可以在CNKI里查中文的,根据它们的关键词中英文对照来做,一般比较准确。

在此主要是说在google里怎么知道这个翻译意思。

大家应该都有词典吧,按中国人的办法,把一个一个词分着查出来,敲到google里,你的这种翻译一般不太准,当然你需要验证是否准确了,这下看着吧,把你的那支离破碎的翻译在google里搜索,你能看到许多相关的文献或资料,大家都不是笨蛋,看看,也就能找到最精确的翻译了,纯西式的!我就是这么用的。

毕设外文文献+翻译1

毕设外文文献+翻译1

外文翻译外文原文CHANGING ROLES OF THE CLIENTS、ARCHITECTSAND CONTRACTORS THROUGH BIMAbstract:Purpose –This paper aims to present a general review of the practical implications of building information modelling (BIM) based on literature and case studies. It seeks to address the necessity for applying BIM and re-organising the processes and roles in hospital building projects. This type of project is complex due to complicated functional and technical requirements, decision making involving a large number of stakeholders, and long-term development processes.Design/methodology/approach–Through desk research and referring to the ongoing European research project InPro, the framework for integrated collaboration and the use of BIM are analysed.Findings –One of the main findings is the identification of the main factors for a successful collaboration using BIM, which can be recognised as “POWER”: product information sharing (P),organisational roles synergy (O), work processes coordination (W), environment for teamwork (E), and reference data consolidation (R).Originality/value –This paper contributes to the actual discussion in science and practice on the changing roles and processes that are required to develop and operate sustainable buildings with the support of integrated ICT frameworks and tools. It presents the state-of-the-art of European research projects and some of the first real cases of BIM application in hospital building projects.Keywords:Europe, Hospitals, The Netherlands, Construction works, Response flexibility, Project planningPaper type :General review1. IntroductionHospital building projects, are of key importance, and involve significant investment, and usually take a long-term development period. Hospital building projects are also very complex due to the complicated requirements regarding hygiene, safety, special equipments, and handling of a large amount of data. The building process is very dynamic and comprises iterative phases and intermediate changes. Many actors with shifting agendas, roles and responsibilities are actively involved, such as: the healthcare institutions, national and local governments, project developers, financial institutions, architects, contractors, advisors, facility managers, and equipment manufacturers and suppliers. Such building projects are very much influenced, by the healthcare policy, which changes rapidly in response to the medical, societal and technological developments, and varies greatly between countries (World Health Organization, 2000). In The Netherlands, for example, the way a building project in the healthcare sector is organised is undergoing a major reform due to a fundamental change in the Dutch health policy that was introduced in 2008.The rapidly changing context posts a need for a building with flexibility over its lifecycle. In order to incorporate life-cycle considerations in the building design, construction technique, and facility management strategy, a multidisciplinary collaboration is required. Despite the attempt for establishing integrated collaboration, healthcare building projects still faces serious problems in practice, such as: budget overrun, delay, and sub-optimal quality in terms of flexibility, end-user’s dissatisfaction, and energy inefficiency. It is evident that the lack of communication and coordination between the actors involved in the different phases of a building project is among the most important reasons behind these problems. The communication between different stakeholders becomes critical, as each stakeholder possesses different setof skills. As a result, the processes for extraction, interpretation, and communication of complex design information from drawings and documents are often time-consuming and difficult. Advanced visualisation technologies, like 4D planning have tremendous potential to increase the communication efficiency and interpretation ability of the project team members. However, their use as an effective communication tool is still limited and not fully explored. There are also other barriers in the information transfer and integration, for instance: many existing ICT systems do not support the openness of the data and structure that is prerequisite for an effective collaboration between different building actors or disciplines.Building information modelling (BIM) offers an integrated solution to the previously mentioned problems. Therefore, BIM is increasingly used as an ICT support in complex building projects. An effective multidisciplinary collaboration supported by an optimal use of BIM require changing roles of the clients, architects, and contractors; new contractual relationships; and re-organised collaborative processes. Unfortunately, there are still gaps in the practical knowledge on how to manage the building actors to collaborate effectively in their changing roles, and to develop and utilise BIM as an optimal ICT support of the collaboration.This paper presents a general review of the practical implications of building information modelling (BIM) based on literature review and case studies. In the next sections, based on literature and recent findings from European research project InPro, the framework for integrated collaboration and the use of BIM are analysed. Subsequently, through the observation of two ongoing pilot projects in The Netherlands, the changing roles of clients, architects, and contractors through BIM application are investigated. In conclusion, the critical success factors as well as the main barriers of a successful integrated collaboration using BIM are identified.2. Changing roles through integrated collaboration and life-cycle design approachesA hospital building project involves various actors, roles, and knowledge domains. In The Netherlands, the changing roles of clients, architects, and contractors in hospital building projects are inevitable due the new healthcare policy. Previously under the Healthcare Institutions Act (WTZi), healthcare institutions were required to obtain both a license and a building permit for new construction projects and major renovations. The permit was issued by the Dutch Ministry of Health. The healthcare institutions were then eligible to receive financial support from the government. Since 2008, new legislation on the management of hospital building projects and real estate has come into force. In this new legislation, a permit for hospital building project under the WTZi is no longer obligatory, nor obtainable (Dutch Ministry of Health, Welfare and Sport, 2008). This change allows more freedom from the state-directed policy, and respectively, allocates more responsibilities to the healthcare organisations to deal with the financing and management of their real estate. The new policy implies that the healthcare institutions are fully responsible to man age and finance their building projects and real estate. The government’s support for the costs of healthcare facilities will no longer be given separately, but will be included in the fee for healthcare services. This means that healthcare institutions must earn back their investment on real estate through their services. This new policy intends to stimulate sustainable innovations in the design, procurement and management of healthcare buildings, which will contribute to effective and efficient primary healthcare services.The new strategy for building projects and real estate management endorses an integrated collaboration approach. In order to assure the sustainability during construction, use, and maintenance, the end-users, facility managers, contractors and specialist contractors need to be involved in the planning and design processes. The implications of the new strategy are reflected in the changing roles of the building actors and in the new procurement method.In the traditional procurement method, the design, and its details, are developed by the architect, and design engineers. Then, the client (the healthcare institution) sends an application to the Ministry of Healthto obtain an approval on the building permit and the financial support from the government. Following this, a contractor is selected through a tender process that emphasises the search for the lowest-price bidder. During the construction period, changes often take place due to constructability problems of the design and new requirements from the client. Because of the high level of technical complexity, and moreover, decision-making complexities, the whole process from initiation until delivery of a hospital building project can take up to ten years time. After the delivery, the healthcare institution is fully in charge of the operation of the facilities. Redesigns and changes also take place in the use phase to cope with new functions and developments in the medical world.The integrated procurement pictures a new contractual relationship between the parties involved in a building project. Instead of a relationship between the client and architect for design, and the client and contractor for construction, in an integrated procurement the client only holds a contractual relationship with the main party that is responsible for both design and construction. The traditional borders between tasks and occupational groups become blurred since architects, consulting firms, contractors, subcontractors, and suppliers all stand on the supply side in the building process while the client on the demand side. Such configuration puts the architect, engineer and contractor in a very different position that influences not only their roles, but also their responsibilities, tasks and communication with the client, the users, the team and other stakeholders.The transition from traditional to integrated procurement method requires a shift of mindset of the parties on both the demand and supply sides. It is essential for the client and contractor to have a fair and open collaboration in which both can optimally use their competencies. The effectiveness of integrated collaboration is also determined by the client’s capacity and strategy to organize innovative tendering procedures.A new challenge emerges in case of positioning an architect in a partnership with the contractor instead of with the client. In case of the architect enters a partnership with the contractor, an important issues is how to ensure the realisation of the architectural values as well as innovative engineering through an efficient construction process. In another case, the architect can stand at the client’s side in a strategic advisory role instead of being the designer. In this case, the architect’s responsibility is translating client’s requirements and wishes into the architectural values to be included in the design specification, and evaluating the contractor’s proposal against this. In any of this new role, the architect holds the responsibilities as stakeholder interest facilitator, custodian of customer value and custodian of design models.The transition from traditional to integrated procurement method also brings consequences in the payment schemes. In the traditional building process, the honorarium for the architect is usually based on a percentage of the project costs; this may simply mean that the more expensive the building is, the higher the honorarium will be. The engineer receives the honorarium based on the complexity of the design and the intensity of the assignment. A highly complex building, which takes a number of redesigns, is usually favourable for the engineers in terms of honorarium. A traditional contractor usually receives the commission based on the tender to construct the building at the lowest price by meeting the minimum specifications given by the client. Extra work due to modifications is charged separately to the client. After the delivery, the contractor is no longer responsible for the long-term use of the building. In the traditional procurement method, all risks are placed with the client.In integrated procurement method, the payment is based on the achieved building performance; thus, the payment is non-adversarial. Since the architect, engineer and contractor have a wider responsibility on the quality of the design and the building, the payment is linked to a measurement system of the functional and technical performance of the building over a certain period of time. The honorarium becomes an incentive to achieve the optimal quality. If the building actors succeed to deliver a higher added-value thatexceed the minimum client’s requirements, they will receive a bonus in accordance to the client’s extra gain. The level of transparency is also improved. Open book accounting is an excellent instrument provided that the stakeholders agree on the information to be shared and to its level of detail (InPro, 2009).Next to the adoption of integrated procurement method, the new real estate strategy for hospital building projects addresses an innovative product development and life-cycle design approaches. A sustainable business case for the investment and exploitation of hospital buildings relies on dynamic life-cycle management that includes considerations and analysis of the market development over time next to the building life-cycle costs (investment/initial cost, operational cost, and logistic cost). Compared to the conventional life-cycle costing method, the dynamic life-cycle management encompasses a shift from focusing only on minimizing the costs to focusing on maximizing the total benefit that can be gained. One of the determining factors for a successful implementation of dynamic life-cycle management is the sustainable design of the building and building components, which means that the design carries sufficient flexibility to accommodate possible changes in the long term (Prins, 1992).Designing based on the principles of life-cycle management affects the role of the architect, as he needs to be well informed about the usage scenarios and related financial arrangements, the changing social and physical environments, and new technologies. Design needs to integrate people activities and business strategies over time. In this context, the architect is required to align the design strategies with the organisational, local and global policies on finance, business operations, health and safety, environment, etc.The combination of process and product innovation, and the changing roles of the building actors can be accommodated by integrated project delivery or IPD (AIA California Council, 2007). IPD is an approach that integrates people, systems, business structures and practices into a process that collaboratively harnesses the talents and insights of all participants to reduce waste and optimize efficiency through all phases of design, fabrication and construction. IPD principles can be applied to a variety of contractual arrangements. IPD teams will usually include members well beyond the basic triad of client, architect, and contractor. At a minimum, though, an Integrated Project should include a tight collaboration between the client, the architect, and the main contractor ultimately responsible for construction of the project, from the early design until the project handover. The key to a successful IPD is assembling a team that is committed to collaborative processes and is capable of working together effectively. IPD is built on collaboration. As a result, it can only be successful if the participants share and apply common values and goals.3. Changing roles through BIM applicationBuilding information model (BIM) comprises ICT frameworks and tools that can support the integrated collaboration based on life-cycle design approach. BIM is a digital representation of physical and functional characteristics of a facility. As such it serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its lifecycle from inception onward (National Institute of Building Sciences NIBS, 2007). BIM facilitates time and place independent collaborative working. A basic premise of BIM is collaboration by different stakeholders at different phases of the life cycle of a facility to insert, extract, update or modify information in the BIM to support and reflect the roles of that stakeholder. BIM in its ultimate form, as a shared digital representation founded on open standards for interoperability, can become a virtual information model to be handed from the design team to the contractor and subcontractors and then to the client.BIM is not the same as the earlier known computer aided design (CAD). BIM goes further than an application to generate digital (2D or 3D) drawings. BIM is an integrated model in which all process and product information is combined, stored, elaborated, and interactively distributed to all relevant building actors. As a central model for all involved actors throughout the project lifecycle, BIM develops andevolves as the project progresses. Using BIM, the proposed design and engineering solutions can be measured against the client’s requirements and expected building performance. The functionalities of BIM to support the design process extend to multidimensional (nD), including: three-dimensional visualisation and detailing, clash detection, material schedule, planning, cost estimate, production and logistic information, and as-built documents. During the construction process, BIM can support the communication between the building site, the factory and the design office– which is crucial for an effective and efficient prefabrication and assembly processes as well as to prevent or solve problems related to unforeseen errors or modifications. When the building is in use, BIM can be used in combination with the intelligent building systems to provide and maintain up-to-date information of the building performance, including the life-cycle cost.To unleash the full potential of more efficient information exchange in the AEC/FM industry in collaborative working using BIM, both high quality open international standards and high quality implementations of these standards must be in place. The IFC open standard is generally agreed to be of high quality and is widely implemented in software. Unfortunately, the certification process allows poor quality implementations to be certified and essentially renders the certified software useless for any practical usage with IFC. IFC compliant BIM is actually used less than manual drafting for architects and contractors, and show about the same usage for engineers. A recent survey shows that CAD (as a closed-system) is still the major form of technique used in design work (over 60 per cent) while BIM is used in around 20 percent of projects for architects and in around 10 per cent of projects for engineers and contractors.The application of BIM to support an optimal cross-disciplinary and cross-phase collaboration opens a new dimension in the roles and relationships between the building actors. Several most relevant issues are: the new role of a model manager; the agreement on the access right and Intellectual Property Right (IPR); the liability and payment arrangement according to the type of contract and in relation to the integrated procurement; and the use of open international standards.Collaborative working using BIM demands a new expert role of a model manager who possesses ICT as well as construction process know-how (InPro, 2009). The model manager deals with the system as well as with the actors. He provides and maintains technological solutions required for BIM functionalities, manages the information flow, and improves the ICT skills of the stakeholders. The model manager does not take decisions on design and engineering solutions, nor the organisational processes, but his roles in the chain of decision making are focused on:the development of BIM, the definition of the structure and detail level of the model, and the deployment of relevant BIM tools, such as for models checking, merging, and clash detections;the contribution to collaboration methods, especially decision making and communication protocols, task planning, and risk management;and the management of information, in terms of data flow and storage, identification of communication errors, and decision or process (re-)tracking.Regarding the legal and organisational issues, one of the actual questions is: “In what way does the intellectual property right (IPR) in collaborative working using BIM differ from the IPR in a traditional teamwork?”. In terms of combined work, the IPR of each element is at tached to its creator. Although it seems to be a fully integrated design, BIM actually resulted from a combination of works/elements; for instance: the outline of the building design, is created by the architect, the design for the electrical system, is created by the electrical contractor, etc. Thus, in case of BIM as a combined work, the IPR is similar to traditional teamwork. Working with BIM with authorship registration functionalities may actually make it easier to keep track of the IPR.How does collaborative working, using BIM, effect the contractual relationship? On the one hand,collaborative working using BIM does not necessarily change the liability position in the contract nor does it obligate an alliance contract. The General Principles of BIM A ddendum confirms: ‘This does not effectuate or require a restructuring of contractual relationships or shifting of risks between or among the Project Participants other than as specifically required per the Protocol Addendum and its Attachments’ (ConsensusDOCS, 2008). On the other hand, changes in terms of payment schemes can be anticipated. Collaborative processes using BIM will lead to the shifting of activities from to the early design phase. Much, if not all, activities in the detailed engineering and specification phase will be done in the earlier phases. It means that significant payment for the engineering phase, which may count up to 40 per cent of the design cost, can no longer be expected. As engineering work is done concurrently with the design, a new proportion of the payment in the early design phase is necessary.4. Review of ongoing hospital building projects using BIMIn The Netherlands, the changing roles in hospital building projects are part of the strategy, which aims at achieving a sustainable real estate in response to the changing healthcare policy. Referring to literature and previous research, the main factors that influence the success of the changing roles can be concluded as: the implementation of an integrated procurement method and a life-cycle design approach for a sustainable collaborative process; the agreement on the BIM structure and the intellectual rights; and the integration of the role of a model manager. The preceding sections have discussed the conceptual thinking on how to deal with these factors effectively. This current section observes two actual projects and compares the actual practice with the conceptual view respectively.The main issues, which are observed in the case studies, are:the selected procurement method and the roles of the involved parties within this method;the implementation of the life-cycle design approach;the type, structure, and functionalities of BIM used in the project;the openness in data sharing and transfer of the model, and the intended use of BIM in the future; and the roles and tasks of the model manager.The pilot experience of hospital building projects using BIM in the Netherlands can be observed at University Medical Centre St Radboud (further referred as UMC) and Maxima Medical Centre (further referred as MMC). At UMC, the new building project for the Faculty of Dentistry in the city of Nijmegen has been dedicated as a BIM pilot project. At MMC, BIM is used in designing new buildings for Medical Simulation and Mother-and-Child Centre in the city of Veldhoven.The first case is a project at the University Medical Centre (UMC) St Radboud. UMC is more than just a hospital. UMC combines medical services, education and research. More than 8500 staff and 3000 students work at UMC. As a part of the innovative real estate strategy, UMC has considered to use BIM for its building projects. The new development of the Faculty of Dentistry and the surrounding buildings on the Kapittelweg in Nijmegen has been chosen as a pilot project to gather practical knowledge and experience on collaborative processes with BIM support.The main ambition to be achieved through the use of BIM in the building projects at UMC can be summarised as follows:using 3D visualisation to enhance the coordination and communication among the building actors, and the user participation in design;integrating the architectural design with structural analysis, energy analysis, cost estimation, and planning;interactively evaluating the design solutions against the programme of requirements and specifications;reducing redesign/remake costs through clash detection during the design process; andoptimising the management of the facility through the registration of medical installations andequipments, fixed and flexible furniture, product and output specifications, and operational data.The second case is a project at the Maxima Medical Centre (MMC). MMC is a large hospital resulted from a merger between the Diaconessenhuis in Eindhoven and St Joseph Hospital in Veldhoven. Annually the 3,400 staff of MMC provides medical services to more than 450,000 visitors and patients. A large-scaled extension project of the hospital in Veldhoven is a part of its real estate strategy. A medical simulation centre and a women-and-children medical centre are among the most important new facilities within this extension project. The design has been developed using 3D modelling with several functionalities of BIM.The findings from both cases and the analysis are as follows. Both UMC and MMC opted for a traditional procurement method in which the client directly contracted an architect, a structural engineer, and a mechanical, electrical and plumbing (MEP) consultant in the design team. Once the design and detailed specifications are finished, a tender procedure will follow to select a contractor. Despite the choice for this traditional method, many attempts have been made for a closer and more effective multidisciplinary collaboration. UMC dedicated a relatively long preparation phase with the architect, structural engineer and MEP consultant before the design commenced. This preparation phase was aimed at creating a common vision on the optimal way for collaboration using BIM as an ICT support. Some results of this preparation phase are: a document that defines the common ambition for the project and the collaborative working process and a semi-formal agreement that states the commitment of the building actors for collaboration. Other than UMC, MMC selected an architecture firm with an in-house engineering department. Thus, the collaboration between the architect and structural engineer can take place within the same firm using the same software application.Regarding the life-cycle design approach, the main attention is given on life-cycle costs, maintenance needs, and facility management. Using BIM, both hospitals intend to get a much better insight in these aspects over the life-cycle period. The life-cycle sustainability criteria are included in the assignments for the design teams. Multidisciplinary designers and engineers are asked to collaborate more closely and to interact with the end-users to address life-cycle requirements. However, ensuring the building actors to engage in an integrated collaboration to generate sustainable design solutions that meet the life-cycle performance expectations is still difficult. These actors are contracted through a traditional procurement method. Their tasks are specific, their involvement is rather short-term in a certain project phase, their responsibilities and liabilities are limited, and there is no tangible incentive for integrated collaboration.From the current progress of both projects, it can be observed that the type and structure of BIM relies heavily on the choice for BIM software applications. Revit Architecture and Revit Structure by Autodesk are selected based on the argument that it has been widely used internationally and it is compatible with AutoCAD, a widely known product of the same software manufacturer. The compatibility with AutoCAD is a key consideration at MMC since the drawings of the existing buildings were created with this application. These 2D drawings were then used as the basis to generate a 3D model with the BIM software application. The architectural model generated with Revit Architecture and the structural model generated by Revit Structure can be linked directly. In case of a change in the architectural model, a message will be sent to the structural engineer. He can then adjust the structural model, or propose a change in return to the architect, so that the structural model is always consistent with the architectural one.Despite the attempt of the design team to agree on using the same software application, the MEP consultant is still not capable to use Revit; and therefore, a conversion of the model from and to Revit is still required. Another weakness of this “closed approach”, which is dependent to the use of the same software applications, may appear in the near future when the project further progresses into the construction phase. If the contractor uses another software application, considerable extra work will be needed to make the model creted during the design phase to be compatible for use in the construction phase.。

外文文献

外文文献

英文文献资料外文文献一:Food safety: the shocking truth about the food industrySource: Author: Marion Nestle、Refrigeration technology, pasteurization, pesticides, disease control, these technologies so that safe food into the 20th century, public health's greatest achievements. This book view is that food safety problems also depend on politics. September 2001 events to dispel this view of the doubts about aviation aircraft used by terrorists as a destruction of weapons to civilians and public figures have anthrax spores sent folder of letters, the consequences of these events shows, food, water can easily become a a tool for terrorists, it has also become the federal government for food safety control problem.This chapter will sum up this book referred to in the various food safety problems. Some of them threatened to keep animals healthy, very few will lead to a number of human diseases. Even so, these issues impact on human well-being is deep; large-scale destruction of breeding animals, affecting the livelihood of many people, limiting personal freedom. The 20th century, 90's and early 21st century, an outbreak of mad cow disease and foot and mouth disease Although this is only because of errors caused by the production process, but still brings a lot of destructive. In contrast, bio-terrorism is the deliberate use of biological and chemical substances to achieve their political objectives. For food safety issues,Bio-terrorism extends food safety issues and political outreach; deliberate destruction, excluding any consequences of innocent injury.In this chapter, we will discuss how the rise of bio-terrorism, food safety issues and extend the extension of food safety issues. In the United States, food safety, usually refers to the family food supply reliability. E-mail from the anthrax incident, the food safety issues, also includes safety from biological terrorism. Our discussion will be the beginning of some zoonotic diseases: such as mad cow disease, foot and mouth disease, anthrax. In recent years, these zoonotic diseases harmful to humans is relatively small. Today, for these zoonotic diseases, we are concerned that they may give rise to disease, destruction of food supply system,To become a tool for bio-terrorism aspect. This chapter summarizes the discussion of this book, fromsociety and from a personal point of view what action should be taken to face these issues, as well as food safety issues present and future.The political animal diseasesOne of the consequences of globalization is that of food cross-border long-distance rapid transit, affecting food supply all kinds of disease can easily spread from one country to another country. Animal diseases have a commercial impact, if a country has come to infectious diseases of animals, other countries will refuse to import the kinds of animal meat. The impact of business at the same time there are political consequences.Britain's mad cow disease and foot and mouth disease occurred as a result of beef in the production process caused by mismanagement, compared to the U.S. anthrax letters is a result of vandalism. However, this three kinds of threatening to cause great panic, they are difficult to detect control, can cause severe disease. Moreover, these three kinds of threats against people for the food supply, as well as confidence in the Government.Mad cow is the mid-20th century, 90 of the most popular of a food security crisis, the epidemic is mainly limited to the United Kingdom. With regard to BSE-related issues and our discussion, mainly because of political issues and scientific issues intertwined Among them, public confidence had a great impact. For example, the British Government in the BSE crisis in the practice is also considered to result in distrust of genetically modified food one of the reasons. The beginning of the 20th century, 80 years, no one had heard of the disease, but in 1999, this disease affects at least 175,000 British cattle. The consequences are very serious: 400 million head of livestock were slaughtered, the loss of 70 billion U.S. dollars,Spread to 18 countries worldwide national boycott of British beef. By 2001 only, although "only" 120 people died of the human variant of mad cow disease, it is estimated the death toll will reach 10 million people. Because mad cow disease revealed the modern politics of food safety issues, it is worth detailing.英文文献中文翻译06013618 胡冬敏外文翻译一:作者:玛丽恩·内斯特尔出版时间:2004年11月食品安全:令人震惊的食品行业真相(美)玛丽恩·内斯特尔冷藏技术,巴氏消毒,杀虫剂,疾病控制,这些技术使安全食品成为20世纪公众健康最伟大的成就之一。

如何翻译外文文献

如何翻译外文文献

如何翻译外文文献翻译外文文献实际上是一项很复杂的任务,需要一定的语言能力和专业知识。

以下是一种可以参考的翻译方法,按照步骤进行翻译文献。

步骤一:了解文献内容在开始翻译之前,首先要全面了解外文文献的内容,包括标题、摘要、关键词以及正文部分。

这可以帮助我们对文献有一个整体的认识,也有助于选择适当的翻译方法和策略。

步骤二:提取关键信息将文献中的关键信息提取出来,这包括理论、观点、实验方法和结果等。

对于较长的文献,可以使用标记或者摘录的方式来提取关键信息。

这一步骤可以帮助我们更好地理解和记忆文献内容,为后续翻译提供准确的依据。

步骤三:理解原文语境在进行翻译之前,需要对原文的语境进行充分理解。

这包括句子结构、段落逻辑、上下文关系等。

可以通过阅读原文多次,或者使用翻译工具辅助理解,确保对原文语境有一个准确的把握。

步骤四:逐句翻译根据原文的语境和关键信息,逐句进行翻译。

在翻译时要注意保持句子的结构和逻辑,尽量使用与原文相近的词汇和表达方式。

可以使用在线翻译工具辅助翻译句子,但要注意工具的准确性和可靠性。

步骤五:整合翻译在完成对文献的逐句翻译之后,要对翻译的句子进行整合,使之成为通顺和连贯的文章。

这包括对句子的连接词、过渡词和段落开头结尾的处理等。

可以对文献内容进行适当的删减和调整,以使之符合目标语言的表达习惯和规范。

步骤六:校对与修改在完成翻译之后,要对翻译的文献进行校对与修改。

这包括检查翻译的语法、用词、句式以及专业术语等的准确性和一致性。

也可以请专业人士或者同行进行审校,以确保翻译的质量和准确性。

总之,翻译外文文献是一项需要细心和耐心的任务,需要具备一定的语言和专业知识。

以上是一种可以参考的翻译方法和步骤,希望对你有所帮助。

外文文献翻译方法与技巧

外文文献翻译方法与技巧

外文文献翻译方法与技巧
翻译外文文献可以为学术研究提供重要的支持,以下是一些翻译方法和技巧:
精读原文
在翻译外文文献之前,先要精读原文并理解文本内容和结构,这可以帮助翻译者确定文本的主题和重点。

同时,熟悉文本的语言风格和词汇也非常重要,可以帮助翻译者更好地理解并翻译文本。

注重语言风格
不同的外文文献可能有着不同的语言风格和表达方式,翻译者应该注重语言风格的翻译,尽可能地保持原文的表达方式和文化背景,同时也要注意译文的可读性。

注意文化差异
在翻译外文文献时,注意文化差异也是非常重要的。

不同的国家和地区有着不同的文化背景和惯,翻译者应该根据文本的背景和主题灵活运用词汇、表达方式和文化隐喻等,让译文更符合文化差异和读者的惯。

使用辅助工具
在翻译外文文献时,辅助工具可以帮助翻译者提高翻译效率和准确率。

例如,使用翻译软件可以帮助翻译者快速翻译大量文本,但需要注意软件翻译的准确性和语言风格是否符合需求。

查看参考文献
在翻译外文文献时,参考文献可以为翻译者提供重要的帮助。

翻译者可以查看相关的研究文献和资料,了解行业和学术领域的相关术语和表达方式,提高翻译的准确性和专业性。

总之,翻译外文文献需要翻译者具有良好的语言能力和专业知识,同时秉承着精读原文、注重语言风格、注意文化差异、使用辅
助工具和查看参考文献的翻译方法和技巧,才能提高翻译质量和效率。

建筑类外文文献及中文翻译

建筑类外文文献及中文翻译

forced concrete structure reinforced with anoverviewReinSince the reform and opening up, with the national economy's rapid and sustained development of a reinforced concrete structure built, reinforced with the development of technology has been great. Therefore, to promote the use of advanced technology reinforced connecting to improve project quality and speed up the pace of construction, improve labor productivity, reduce costs, and is of great significance.Reinforced steel bars connecting technologies can be divided into two broad categories linking welding machinery and steel. There are six types of welding steel welding methods, and some apply to the prefabricated plant, and some apply to the construction site, some of both apply. There are three types of machinery commonly used reinforcement linking method primarily applicable to the construction site. Ways has its own characteristics and different application, and in the continuous development and improvement. In actual production, should be based on specific conditions of work, working environment and technical requirements, the choice of suitable methods to achieve the best overall efficiency.1、steel mechanical link1.1 radial squeeze linkWill be a steel sleeve in two sets to the highly-reinforced Department with superhigh pressure hydraulic equipment (squeeze tongs) along steel sleeve radial squeeze steel casing, in squeezing out tongs squeeze pressure role of a steel sleeve plasticity deformation closely integrated with reinforced through reinforced steel sleeve and Wang Liang's Position will be two solid steel bars linkedCharacteristic: Connect intensity to be high, performance reliable, can bear high stress draw and pigeonhole the load and tired load repeatedly.Easy and simple to handle, construction fast, save energy and material, comprehensive economy profitable, this method has been already a large amount of application in the project.Applicable scope : Suitable for Ⅱ, Ⅲ, Ⅳgrade reinforcing bar (including welding bad reinfor cing bar ) with ribbing of Ф 18- 50mm, connection between the same diameter or different diameters reinforcing bar .1.2must squeeze linkExtruders used in the covers, reinforced axis along the cold metal sleeve squeeze dedicated to insert sleeve Lane two hot rolling steel drums into a highly integrated mechanical linking methods.Characteristic: Easy to operate and joining fast and not having flame homework , can construct for 24 hours , save a large number of reinforcing bars and energy. Applicable scope : Suitable for , set up according to first and second class antidetonation requirement -proof armored concrete structure ФⅡ, Ⅲgrade reinforcing bar with ribbing of hot rolling of 20- 32mm join and construct live.1.3 cone thread connectingUsing cone thread to bear pulled, pressed both effort and self-locking nature, undergo good principles will be reinforced by linking into cone-processing thread at the moment the value of integration into the joints connecting steel bars.Characteristic: Simple , all right preparatory cut of the craft , connecting fast, concentricity is good, have pattern person who restrain from advantage reinforcing bar carbon content.Applicable scope : Suitable for the concrete structure of the industry , civil buil ding and general structures, reinforcing bar diameter is for Фfor the the 16- 40mm one Ⅱ, Ⅲgrade verticality, it is the oblique to or reinforcing bars horizontal join construct live.conclusionsThese are now commonly used to connect steel synthesis methods, which links technology in the United States, Britain, Japan and other countries are widely used. There are different ways to connect their different characteristics and scope of the actual construction of production depending on the specific project choose a suitable method of connecting to achieve both energy conservation and saving time limit for a project ends.钢筋混凝土构造中钢筋连接综述改革开放以来,伴随国民经济旳迅速、持久发展,多种钢筋混凝土建筑构造大量建造,钢筋连接技术得到很大旳发展。

(完整word版)外文文献及翻译doc

(完整word版)外文文献及翻译doc

Criminal Law1.General IntroductionCriminal law is the body of the law that defines criminal offenses, regulates the apprehension, charging, and trial of suspected offenders,and fixes punishment for convicted persons. Substantive criminal law defines particular crimes, and procedural law establishes rules for the prosecution of crime. In a democratic society, it is the function of the legislative bodies to decide what behavior will be made criminal and what penalties will be attached to violations of the law.Capital punishment may be imposed in some jurisdictions for the most serious crimes. And physical or corporal punishment may still be imposed such as whipping or caning, although these punishments are prohibited in much of the world. A convict may be incarcerated in prison or jail and the length of incarceration may vary from a day to life.Criminal law is a reflection of the society that produce it. In an Islamic theocracy, such as Iran, criminal law will reflect the religious teachings of the Koran; in an Catholic country, it will reflect the tenets of Catholicism. In addition, criminal law will change to reflect changes in society, especially attitude changes. For instance, use of marijuana was once considered a serious crime with harsh penalties, whereas today the penalties in most states are relatively light. As severity of the penaltieswas reduced. As a society advances, its judgments about crime and punishment change.2.Elements of a CrimeObviously, different crimes require different behaviors, but there are common elements necessary for proving all crimes. First, the prohibited behavior designated as a crime must be clearly defined so that a reasonable person can be forewarned that engaging in that behavior is illegal. Second, the accused must be shown to have possessed the requisite intent to commit the crime. Third, the state must prove causation. Finally, the state must prove beyond a reasonable doubt that the defendant committed the crime.(1) actus reusThe first element of crime is the actus reus.Actus is an act or action and reus is a person judicially accused of a crime. Therefore, actus reus is literally the action of a person accused of a crime. A criminal statute must clearly define exactly what act is deemed “guilty”---that is, the exact behavior that is being prohibited. That is done so that all persons are put on notice that if they perform the guilty act, they will be liable for criminal punishment. Unless the actus reus is clearly defined, one might not know whether or not on e’s behavior is illegal.Actus reus may be accomplished by an action, by threat of action,or exceptionally, by an omission to act, which is a legal duty to act. For example, the act of Cain striking Abel might suffice, or a parent’s failure to give to a young child also may provide the actus reus for a crime.Where the actus reus is a failure to act, there must be a duty of care. A duty can arise through contract, a voluntary undertaking, a blood relation, and occasionally through one’s official position. Duty also can arise from one’s own creation of a dangerous situation.(2)mens reaA second element of a crime is mens rea. Mens rea refers to an individual’s state of mind when a crime is committed. While actus reus is proven by physical or eyewitness evidence, mens rea is more difficult to ascertain. The jury must determine for itself whether the accused had the necessary intent to commit the act.A lower threshold of mens rea is satisfied when a defendant recognizes an act is dangerous but decides to commit it anyway. This is recklessness. For instance, if Cain tears a gas meter from a wall, and knows this will let flammable gas escape into a neighbor’s house, he could be liable for poisoning. Courts often consider whether the actor did recognise the danger, or alternatively ought to have recognized a danger (though he did not) is tantamount to erasing intent as a requirement. In this way, the importance of mens rea hasbeen reduced in some areas of the criminal law.Wrongfulness of intent also may vary the seriousness of an offense. A killing committed with specific intent to kill or with conscious recognition that death or serious bodily harm will result, would be murder, whereas a killing affected by reckless acts lacking such a consciousness could be manslaughter.(3)CausationThe next element is causation. Often the phrase “but for”is used to determine whether causation has occurred. For example, we might say “Cain caused Abel”, by which we really mean “Cain caused Abel’s death. ”In other words, ‘but for Cain’s act, Abel would still be alive.” Causation, then, means “but for” the actions of A, B would not have been harmed. In criminal law, causation is an element that must be proven beyond a reasonable doubt.(4) Proof beyond a Reasonable DoubtIn view of the fact that in criminal cases we are dealing with the life and liberty of the accused person, as well as the stigma accompanying conviction, the legal system places strong limits on the power of the state to convict a person of a crime. Criminal defendants are presumed innocent. The state must overcome this presumption of innocence by proving every element of the offense charged against the defendant beyond a reasonable doubt to thesatisfaction of all the jurors. This requirement is the primary way our system minimizes the risk of convicting an innocent person.The state must prove its case within a framework of procedural safeguards that are designed to protect the accused. The state’s failure to prove any material element of its case results in the accused being acquitted or found not guilty, even though he or she may actually have committed the crime charged.3. Strict LiabilityIn modern society, some crimes require no more mens rea, and they are known as strict liability offenses. For in stance, under the Road Traffic Act 1988 it is a strict liability offence to drive a vehicle with an alcohol concentration above the prescribed limit.Strict liability can be described as criminal or civil liability notwithstanding the lack mens rea or intent by the defendant. Not all crimes require specific intent, and the threshold of culpability required may be reduced. For example, it might be sufficient to show that a defendant acted negligently, rather than intentionally or recklessly.1. 概述刑法是规定什么试犯罪,有关犯罪嫌疑人之逮捕、起诉及审判,及对已决犯处以何种刑罚的部门法。

外文文献及翻译

外文文献及翻译

((英文参考文献及译文)二〇一六年六月本科毕业论文 题 目:STATISTICAL SAMPLING METHOD, USED INTHE AUDIT学生姓名:王雪琴学 院:管理学院系 别:会计系专 业:财务管理班 级:财管12-2班 学校代码: 10128 学 号: 201210707016Statistics and AuditRomanian Statistical Review nr. 5 / 2010STATISTICAL SAMPLING METHOD, USED IN THE AUDIT - views, recommendations, fi ndingsPhD Candidate Gabriela-Felicia UNGUREANUAbstractThe rapid increase in the size of U.S. companies from the earlytwentieth century created the need for audit procedures based on the selectionof a part of the total population audited to obtain reliable audit evidence, tocharacterize the entire population consists of account balances or classes oftransactions. Sampling is not used only in audit – is used in sampling surveys,market analysis and medical research in which someone wants to reach aconclusion about a large number of data by examining only a part of thesedata. The difference is the “population” from which the sample is selected, iethat set of data which is intended to draw a conclusion. Audit sampling appliesonly to certain types of audit procedures.Key words: sampling, sample risk, population, sampling unit, tests ofcontrols, substantive procedures.Statistical samplingCommittee statistical sampling of American Institute of CertifiedPublic Accountants of (AICPA) issued in 1962 a special report, titled“Statistical sampling and independent auditors’ which allowed the use ofstatistical sampling method, in accordance with Generally Accepted AuditingStandards (GAAS). During 1962-1974, the AICPA published a series of paperson statistical sampling, “Auditor’s Approach to Statistical Sampling”, foruse in continuing professional education of accountants. During 1962-1974,the AICPA published a series of papers on statistical sampling, “Auditor’sApproach to Statistical Sampling”, for use in continuing professional educationof accountants. In 1981, AICPA issued the professional standard, “AuditSampling”, which provides general guidelines for both sampling methods,statistical and non-statistical.Earlier audits included checks of all transactions in the period coveredby the audited financial statements. At that time, the literature has not givenparticular attention to this subject. Only in 1971, an audit procedures programprinted in the “Federal Reserve Bulletin (Federal Bulletin Stocks)” includedseveral references to sampling such as selecting the “few items” of inventory.Statistics and Audit The program was developed by a special committee, which later became the AICPA, that of Certified Public Accountants American Institute.In the first decades of last century, the auditors often applied sampling, but sample size was not in related to the efficiency of internal control of the entity. In 1955, American Institute of Accountants has published a study case of extending the audit sampling, summarizing audit program developed by certified public accountants, to show why sampling is necessary to extend the audit. The study was important because is one of the leading journal on sampling which recognize a relationship of dependency between detail and reliability testing of internal control.In 1964, the AICPA’s Auditing Standards Board has issued a report entitled “The relationship between statistical sampling and Generally Accepted Auditing Standards (GAAS)” which illustrated the relationship between the accuracy and reliability in sampling and provisions of GAAS.In 1978, the AICPA published the work of Donald M. Roberts,“Statistical Auditing”which explains the underlying theory of statistical sampling in auditing.In 1981, AICPA issued the professional standard, named “Audit Sampling”, which provides guidelines for both sampling methods, statistical and non-statistical.An auditor does not rely solely on the results of a single procedure to reach a conclusion on an account balance, class of transactions or operational effectiveness of the controls. Rather, the audit findings are based on combined evidence from several sources, as a consequence of a number of different audit procedures. When an auditor selects a sample of a population, his objective is to obtain a representative sample, ie sample whose characteristics are identical with the population’s characteristics. This means that selected items are identical with those remaining outside the sample.In practice, auditors do not know for sure if a sample is representative, even after completion the test, but they “may increase the probability that a sample is representative by accuracy of activities made related to design, sample selection and evaluation” [1]. Lack of specificity of the sample results may be given by observation errors and sampling errors. Risks to produce these errors can be controlled.Observation error (risk of observation) appears when the audit test did not identify existing deviations in the sample or using an inadequate audit technique or by negligence of the auditor.Sampling error (sampling risk) is an inherent characteristic of the survey, which results from the fact that they tested only a fraction of the total population. Sampling error occurs due to the fact that it is possible for Revista Română de Statistică nr. 5 / 2010Statistics and Auditthe auditor to reach a conclusion, based on a sample that is different from the conclusion which would be reached if the entire population would have been subject to audit procedures identical. Sampling risk can be reduced by adjusting the sample size, depending on the size and population characteristics and using an appropriate method of selection. Increasing sample size will reduce the risk of sampling; a sample of the all population will present a null risk of sampling.Audit Sampling is a method of testing for gather sufficient and appropriate audit evidence, for the purposes of audit. The auditor may decide to apply audit sampling on an account balance or class of transactions. Sampling audit includes audit procedures to less than 100% of the items within an account balance or class of transactions, so all the sample able to be selected. Auditor is required to determine appropriate ways of selecting items for testing. Audit sampling can be used as a statistical approach and a non- statistical.Statistical sampling is a method by which the sample is made so that each unit consists of the total population has an equal probability of being included in the sample, method of sample selection is random, allowed to assess the results based on probability theory and risk quantification of sampling. Choosing the appropriate population make that auditor’ findings can be extended to the entire population.Non-statistical sampling is a method of sampling, when the auditor uses professional judgment to select elements of a sample. Since the purpose of sampling is to draw conclusions about the entire population, the auditor should select a representative sample by choosing sample units which have characteristics typical of that population. Results will not extrapolate the entire population as the sample selected is representative.Audit tests can be applied on the all elements of the population, where is a small population or on an unrepresentative sample, where the auditor knows the particularities of the population to be tested and is able to identify a small number of items of interest to audit. If the sample has not similar characteristics for the elements of the entire population, the errors found in the tested sample can not extrapolate.Decision of statistical or non-statistical approach depends on the auditor’s professional judgment which seeking sufficient appropriate audits evidence on which to completion its findings about the audit opinion.As a statistical sampling method refer to the random selection that any possible combination of elements of the community is equally likely to enter the sample. Simple random sampling is used when stratification was not to audit. Using random selection involves using random numbers generated byRomanian Statistical Review nr. 5 / 2010Statistics and Audit a computer. After selecting a random starting point, the auditor found the first random number that falls within the test document numbers. Only when the approach has the characteristics of statistical sampling, statistical assessments of risk are valid sampling.In another variant of the sampling probability, namely the systematic selection (also called random mechanical) elements naturally succeed in office space or time; the auditor has a preliminary listing of the population and made the decision on sample size. “The auditor calculated a counting step, and selects the sample element method based on step size. Step counting is determined by dividing the volume of the community to sample the number of units desired. Advantages of systematic screening are its usability. In most cases, a systematic sample can be extracted quickly and method automatically arranges numbers in successive series.”[2].Selection by probability proportional to size - is a method which emphasizes those population units’recorded higher values. The sample is constituted so that the probability of selecting any given element of the population is equal to the recorded value of the item;Stratifi ed selection - is a method of emphasis of units with higher values and is registered in the stratification of the population in subpopulations. Stratification provides a complete picture of the auditor, when population (data table to be analyzed) is not homogeneous. In this case, the auditor stratifies a population by dividing them into distinct subpopulations, which have common characteristics, pre-defined. “The objective of stratification is to reduce the variability of elements in each layer and therefore allow a reduction in sample size without a proportionate increase in the risk of sampling.” [3] If population stratification is done properly, the amount of sample size to come layers will be less than the sample size that would be obtained at the same level of risk given sample with a sample extracted from the entire population. Audit results applied to a layer can be designed only on items that are part of that layer.I appreciated as useful some views on non-statistical sampling methods, which implies that guided the selection of the sample selecting each element according to certain criteria determined by the auditor. The method is subjective; because the auditor selects intentionally items containing set features him.The selection of the series is done by selecting multiple elements series (successive). Using sampling the series is recommended only if a reasonable number of sets used. Using just a few series there is a risk that the sample is not representative. This type of sampling can be used in addition to other samples, where there is a high probability of occurrence of errors. At the arbitrary selection, no items are selected preferably from the auditor, Revista Română de Statistică nr. 5 / 2010Statistics and Auditthat regardless of size or source or characteristics. Is not the recommended method, because is not objective.That sampling is based on the auditor’s professional judgment, which may decide which items can be part or not sampled. Because is not a statistical method, it can not calculate the standard error. Although the sample structure can be constructed to reproduce the population, there is no guarantee that the sample is representative. If omitted a feature that would be relevant in a particular situation, the sample is not representative.Sampling applies when the auditor plans to make conclusions about population, based on a selection. The auditor considers the audit program and determines audit procedures which may apply random research. Sampling is used by auditors an internal control systems testing, and substantive testing of operations. The general objectives of tests of control system and operations substantive tests are to verify the application of pre-defined control procedures, and to determine whether operations contain material errors.Control tests are intended to provide evidence of operational efficiency and controls design or operation of a control system to prevent or detect material misstatements in financial statements. Control tests are necessary if the auditor plans to assess control risk for assertions of management.Controls are generally expected to be similarly applied to all transactions covered by the records, regardless of transaction value. Therefore, if the auditor uses sampling, it is not advisable to select only high value transactions. Samples must be chosen so as to be representative population sample.An auditor must be aware that an entity may change a special control during the course of the audit. If the control is replaced by another, which is designed to achieve the same specific objective, the auditor must decide whether to design a sample of all transactions made during or just a sample of transactions controlled again. Appropriate decision depends on the overall objective of the audit test.Verification of internal control system of an entity is intended to provide guidance on the identification of relevant controls and design evaluation tests of controls.Other tests:In testing internal control system and testing operations, audit sample is used to estimate the proportion of elements of a population containing a characteristic or attribute analysis. This proportion is called the frequency of occurrence or percentage of deviation and is equal to the ratio of elements containing attribute specific and total number of population elements. WeightRomanian Statistical Review nr. 5 / 2010Statistics and Audit deviations in a sample are determined to calculate an estimate of the proportion of the total population deviations.Risk associated with sampling - refers to a sample selection which can not be representative of the population tested. In other words, the sample itself may contain material errors or deviations from the line. However, issuing a conclusion based on a sample may be different from the conclusion which would be reached if the entire population would be subject to audit.Types of risk associated with sampling:Controls are more effective than they actually are or that there are not significant errors when they exist - which means an inappropriate audit opinion. Controls are less effective than they actually are that there are significant errors when in fact they are not - this calls for additional activities to establish that initial conclusions were incorrect.Attributes testing - the auditor should be defining the characteristics to test and conditions for misconduct. Attributes testing will make when required objective statistical projections on various characteristics of the population. The auditor may decide to select items from a population based on its knowledge about the entity and its environment control based on risk analysis and the specific characteristics of the population to be tested.Population is the mass of data on which the auditor wishes to generalize the findings obtained on a sample. Population will be defined compliance audit objectives and will be complete and consistent, because results of the sample can be designed only for the population from which the sample was selected.Sampling unit - a unit of sampling may be, for example, an invoice, an entry or a line item. Each sample unit is an element of the population. The auditor will define the sampling unit based on its compliance with the objectives of audit tests.Sample size - to determine the sample size should be considered whether sampling risk is reduced to an acceptable minimum level. Sample size is affected by the risk associated with sampling that the auditor is willing to accept it. The risk that the auditor is willing to accept lower, the sample will be higher.Error - for detailed testing, the auditor should project monetary errors found in the sample population and should take into account the projected error on the specific objective of the audit and other audit areas. The auditor projects the total error on the population to get a broad perspective on the size of the error and comparing it with tolerable error.For detailed testing, tolerable error is tolerable and misrepresentations Revista Română de Statistică nr. 5 / 2010Statistics and Auditwill be a value less than or equal to materiality used by the auditor for the individual classes of transactions or balances audited. If a class of transactions or account balances has been divided into layers error is designed separately for each layer. Design errors and inconsistent errors for each stratum are then combined when considering the possible effect on the total classes of transactions and account balances.Evaluation of sample results - the auditor should evaluate the sample results to determine whether assessing relevant characteristics of the population is confirmed or needs to be revised.When testing controls, an unexpectedly high rate of sample error may lead to an increase in the risk assessment of significant misrepresentation unless it obtained additional audit evidence to support the initial assessment. For control tests, an error is a deviation from the performance of control procedures prescribed. The auditor should obtain evidence about the nature and extent of any significant changes in internal control system, including the staff establishment.If significant changes occur, the auditor should review the understanding of internal control environment and consider testing the controls changed. Alternatively, the auditor may consider performing substantive analytical procedures or tests of details covering the audit period.In some cases, the auditor might not need to wait until the end audit to form a conclusion about the effectiveness of operational control, to support the control risk assessment. In this case, the auditor might decide to modify the planned substantive tests accordingly.If testing details, an unexpectedly large amount of error in a sample may cause the auditor to believe that a class of transactions or account balances is given significantly wrong in the absence of additional audit evidence to show that there are not material misrepresentations.When the best estimate of error is very close to the tolerable error, the auditor recognizes the risk that another sample have different best estimate that could exceed the tolerable error.ConclusionsFollowing analysis of sampling methods conclude that all methods have advantages and disadvantages. But the auditor is important in choosing the sampling method is based on professional judgment and take into account the cost / benefit ratio. Thus, if a sampling method proves to be costly auditor should seek the most efficient method in view of the main and specific objectives of the audit.Romanian Statistical Review nr. 5 / 2010Statistics and Audit The auditor should evaluate the sample results to determine whether the preliminary assessment of relevant characteristics of the population must be confirmed or revised. If the evaluation sample results indicate that the relevant characteristics of the population needs assessment review, the auditor may: require management to investigate identified errors and likelihood of future errors and make necessary adjustments to change the nature, timing and extent of further procedures to take into account the effect on the audit report.Selective bibliography:[1] Law no. 672/2002 updated, on public internal audit[2] Arens, A şi Loebbecke J - Controve …Audit– An integrate approach”, 8th edition, Arc Publishing House[3] ISA 530 - Financial Audit 2008 - International Standards on Auditing, IRECSON Publishing House, 2009- Dictionary of macroeconomics, Ed C.H. Beck, Bucharest, 2008Revista Română de Statistică nr. 5 / 2010Statistics and Audit摘要美国公司的规模迅速增加,从第二十世纪初创造了必要的审计程序,根据选定的部分总人口的审计,以获得可靠的审计证据,以描述整个人口组成的帐户余额或类别的交易。

机械类外文文献翻译(中英文翻译)

机械类外文文献翻译(中英文翻译)

机械类外文文献翻译(中英文翻译)英文原文Mechanical Design and Manufacturing ProcessesMechanical design is the application of science and technology to devise new or improved products for the purpose of satisfying human needs. It is a vast field of engineering technology which not only concerns itself with the original conception of the product in terms of its size, shape and construction details, but also considers the various factors involved in the manufacture, marketing and use of the product.People who perform the various functions of mechanical design are typically called designers, or design engineers. Mechanical design is basically a creative activity. However, in addition to being innovative, a design engineer must also have a solid background in the areas of mechanical drawing, kinematics, dynamics, materials engineering, strength of materials and manufacturing processes.As stated previously, the purpose of mechanical design is to produce a product which will serve a need for man. Inventions, discoveries and scientific knowledge by themselves do not necessarily benefit people; only if they are incorporated into a designed product will a benefit be derived. It should be recognized, therefore, that a human need must be identified before a particular product is designed.Mechanical design should be considered to be an opportunity to use innovative talents to envision a design of a product, to analyze the systemand then make sound judgments on how the product is to be manufactured. It is important to understand the fundamentals of engineering rather than memorize mere facts and equations. There are no facts or equations which alone can be used to provide all the correct decisions required to produce a good design.On the other hand, any calculations made must be done with the utmost care and precision. For example, if a decimal point is misplaced, an otherwise acceptable design may not function.Good designs require trying new ideas and being willing to take a certain amount of risk, knowing that if the new idea does not work the existing method can be reinstated. Thus a designer must have patience, since there is no assurance of success for the time and effort expended. Creating a completely new design generally requires that many old and well-established methods be thrust aside. This is not easy since many people cling to familiar ideas, techniques and attitudes. A design engineer should constantly search for ways to improve an existing product and must decide what old, proven concepts should be used and what new, untried ideas should be incorporated.New designs generally have "bugs" or unforeseen problems which must be worked out before the superior characteristics of the new designs can be enjoyed. Thus there is a chance for a superior product, but only at higher risk. It should be emphasized that, if a design does not warrant radical new methods, such methods should not be applied merely for the sake of change.During the beginning stages of design, creativity should be allowedto flourish without a great number of constraints. Even though many impractical ideas may arise, it is usually easy to eliminate them in the early stages of design before firm details are required by manufacturing. In this way, innovative ideas are not inhibited. Quite often, more than one design is developed, up to the point where they can be compared against each other. It is entirely possible that the design which is ultimately accepted will use ideas existing in one of the rejected designs that did not show as much overall promise.Psychologists frequently talk about trying to fit people to the machines they operate. It is essentially the responsibility of the design engineer to strive to fit machines to people. This is not an easy task, since there is really no average person for which certain operating dimensions and procedures are optimum.Another important point which should be recognized is that a design engineer must be able to communicate ideas to other people if they are to be incorporated. Communicating the design to others is the final, vital step in the design process. Undoubtedly many great designs, inventions, and creative works have been lost to mankind simply because the originators were unable or unwilling to explain their accomplishments to others. Presentation is a selling job. The engineer, when presenting a new solution to administrative, management, or supervisory persons, is attempting to sell or to prove to them that this solution is a better one. Unless this can be done successfully, the time and effort spent on obtaining the solution have been largely wasted.Basically, there are only three means of communication available tous. These are the written, the oral, and the graphical forms. Therefore the successful engineer will be technically competent and versatile in all three forms of communication. A technically competent person who lacks ability in any one of these forms is severely handicapped. If ability in all three forms is lacking, no one will ever know how competent that person is!The competent engineer should not be afraid of the possibility of not succeeding in a presentation. In fact, occasional failure should be expected because failure or criticism seems to accompany every really creative idea. There is a great deal to be learned from a failure, and the greatest gains are obtained by those willing to risk defeat. In the final analysis, the real failure would lie in deciding not to make the presentation at all. To communicate effectively, the following questions must be answered:(1) Does the design really serve a human need?(2) Will it be competitive with existing products of rival companies?(3) Is it economical to produce?(4) Can it be readily maintained?(5) Will it sell and make a profit?Only time will provide the true answers to the preceding questions, but the product should be designed, manufactured and marketed only with initial affirmative answers. The design engineer also must communicate the finalized design to manufacturing through the use of detail and assembly drawings.Quite often, a problem will occur during the manufacturing cycle [3].It may be that a change is required in the dimensioning or tolerancing of a part so that it can be more readily produced. This fails in the category of engineering changes which must be approved by the design engineer so that the product function will not be adversely affected. In other cases, a deficiency in the design may appear during assembly or testing just prior to shipping. These realities simply bear out the fact that design is a living process. There is always a better way to do it and the designer should constantly strive towards finding that better way.Designing starts with a need, real or imagined. Existing apparatus may need improvements in durability, efficiently, weight, speed, or cost. New apparatus may be needed to perform a function previously done by men, such as computation, assembly, or servicing. With the objective wholly or partly defined, the next step in design is the conception of mechanisms and their arrangements that will perform the needed functions.For this, freehand sketching is of great value, not only as a record of one's thoughts and as an aid in discussion with others, but particularly for communication with one's own mind, as a stimulant for creative ideas.When the general shape and a few dimensions of the several components become apparent, analysis can begin in earnest. The analysis will have as its objective satisfactory or superior performance, plus safety and durability with minimum weight, and a competitive east. Optimum proportions and dimensions will be sought for each critically loaded section, together with a balance between the strength of the several components. Materials and their treatment will be chosen. These important objectives can be attained only by analysis based upon the principles ofmechanics, such as those of statics for reaction forces and for the optimumutilization of friction; of dynamics for inertia, acceleration, and energy; of elasticity and strength of materials for stress。

外文文献及翻译

外文文献及翻译

英语原文Intelligent Building1、 GeneralAn Intelligent Building is one conceived and designed with an integrated flexible and modular communication cabling infrastructure capable of accommodating the needs of information intensive users for advanced information technology and services.Ever increasing occupation densities as well as the exponential development and quasi universal use of personal computers coupled to market globalization and communication capabilities, over the past 20 years, have rendered the Intelligent Building (IB) concept a priority consideration in the planning of new or upgradedOffice buildings. Evolution towards new social priorities, for the more educated office worker of today, has also led to substantial increases in environmental issue demands and standards. Social studies revealed a direct relationship between user satisfaction in the workplace and productivity. Individual control capability of ambient conditions, at each work station, was identified as a major element leading to user satisfaction.Technological developments and cost attenuations through technological development and product availability have now rendered the Intelligent Building a viable and a justifiable option from a strict cost to benefit aspect.2、OverviewDefinitions for the Intelligent Building concept still vary but the most accepted description is the one produced by the Barcelona-based Ins titut defons Cerdà:“A building which incorporates information systems that support the flow of information throughout the building, offering advanced services of business automation and telecommunications, allowing furthermore automatic control,monitoring management and maintenance of the different subsystems or services of the building in an optimum and integrated way, local and/or remote, and designed with sufficient flexibility to make possible in asimple and economical way the implementation of future systems.”To the uninitiated, the perception of a building’s degre e of intelligence is too often correlated with the sophistication level of its Energy Management and Control System (EMCS) and its Communications system. However, to be effective, it must also encompass its mechanical and electrical systems order to minimize costs and maximize efficiency. There would be little point in developing ideal EMCS and its Communication systems for the occupants if HV AC, Lighting and other systems annot meet and satisfy the needs of the occupants.In a new IB installation we should expect the following features:• High- speed fibre optic communication network trunk for data, video and BAS.• Flexible HV AC system with modular distribution and 100% outdoor aircapability to take advantage of free cooling as well as to allow flushing ofthe building to dilute volatile off-gassing contaminants; • Advanced integrated Energy Management & Control System (EMCS)utilizing direct digital control technology for HV AC, Lighting, Fire Alarm and other building support systems;• Dedicated circuit power distribution network complete wit h Uninterruptable Power Supply units; • Generous standby power generation;• High efficiency filtration, energy recuperation and/or thermal storage features to improve indoor air quality and energy consumption performance;• Networked multi-user access incorporating structured password protection;• Maximum transparency and communication capabilities between subsystems;• Electrical design features tailored to Intelligent Building;• Individually controlled HV AC terminal units allowing occupa nt control flexibility through Intelligent Terminals Controllers at each workstation.In retrofit buildings we would expect variations of the above features based on an owning and operating economical analysis taking into account the existing services and the benefits ensuing through their replacement and/or upgrade. Major retrofits,particularly those involving designs dating back 20 years or more, are generally dictated by a combination of the following:• New code requirements,• Updated indoor air quality standards,• Revised energy efficiency guidelines,• Increased internal electrical requirements associated to the generalized use of PCs.• Revised building use. The average life cycle of most M&E installations is 20 ye ars versus an average building life cycle of 50 years. These retrofits, therefore, often dictate a complete revamping of the existing M&E installations well before the building’s life cycle has expired. This frequently offers an opportunity to upgrade the bu ilding’s support systems to IB standards.3、HistoryThe IB concept surfaced in the early 80's and generally advocated extensive use of elaborate centralized electronic systems to facilitate control of building support and communication systems for voice and data. The initial concept promoted communication networks to allow centralized word processing services and limited interaction between individual occupants and the Building Automation Systems through touch tone phones to override local HV AC set points and lighting schedules.Builders and owners were pressured to develop intelligent buildings, in spite of the high premium costs, at that time, for prestige reasons and for enhanced rental potential.The Building Automation System and the Communication System industry as well as other specialized interest groups soon developed specific products and applications to meet and facilitate the implementation of the Intelligent Building concept. These developments coupled to the burgeoning Personal Computer market development have since reduced cost premiums drastically and greatly improved the ensuing benefits for Intelligent Buildings.The IB concept is now well accepted and applied in Europe, Asiaand North America.4、Future trendsThe former Intelligent Building Institute (IBI) foundation advocated, a few years ago, a need to recognize, in future building designs, the transition from national economies to a combination of local and global economies and therefore the need to facilitate each employee’s access to global communication networks. They predicted that information technology access will provide the biggest single impetus for change in the office environment. This prediction has now become a reality.IBI also predicted that environmental issues and particularly Indoor Air Quality (IAQ) were becoming a primary concern in the design of the new office buildings. Improved air filtration and increased air change were pinpointed as major concerns in addition to flexible ambient room condition control.Other studies performed recently reveal that the use of Personal Environment Controllers formerly called Intelligent Terminal Controllers or has measurably increased occupant satisfaction in the workplace on a number of pilot project installations. PECs are a combination of mechanical, electrical and control devices developed for the work station environment control and conceived to provide the occupant with the means to define and interact on temperature set points, air flow volume and diffusion patterns as well as lighting levels affecting productivity and user satisfaction. These studies have associated improved production to the use of Intelligent Terminals Controllers.5、Intelligent Building ModelThe IB model structure has been subdivided into seven systems which may be interfaced to varying degrees. These systems are...•Heating Ventilating and Air Conditioning (HV AC) system;•Lighting System;•Electrical Power Distribution system;•Vertical Transport System;•Security S ystem;•Life Safety System;•Communications System;The general objective of the Intelligent Building System is to regroup control of these subsystems and facilitate interchange between them to the maximum justifiable extent while maintaining maximal initial and future competitive bidding possibilities of each component as well as allowing dependent and timely upgrading of each system as new technologies evolve in its particular field.The IB concept also attempts to combine, wherever possible, the cabling networks for these subsystems in order to minimize costs and facilitate intercommunication or allow future upgrading.Efforts are being deployed between ASHRAE, IEEE, AEE and the computer industry to develop universal communication protocol standards. It is not expected, however, that universal standards will become a reality for another decade. The cabling structure must therefore be conceived to accommodate the foreseeable requirements with minimal disturbance and cost when and if universal standards materialize. The favoured backbone communication cabling technology at this time favors fibre optic technology, because of its high speed communication potential.6、Facilities Managementnumber of facility management programs are available on the market. They vary in complexity as well as in their ability to integrate complex systems such as:• CAD drawing records of floor and office layouts;•Furniture inventory;• Maintenance management programs for M&E equipment• Preventive maintenance of building structures;• Real time data acquisition on equipment run time;• Dynamic energy consumption totals per tenant;• Historical data storage;• Cost control and budgeting capabilities;• Analytical programs.The Intelligent Building’s role in this system is to allow communication between the overall facility management program and specialized management sub-programs such as the EMCS, the M & E Maintenance Management or the Preventive Maintenance to gather data or convey user complaints. his communication flexibility in IB installations allows the allocation of specific management systems on the basis of areas of specialization,competencies or individual buildings of a complex while maintaining capabilities for overall centralization of data and control.The IB communication capabilities can also facilitate interchange withaccounting or other Networks to import or export pertinent data whether inhouse or outsourced.7、ConclusionsThe Intelligent Building concept represents a new trend in office building planning and one more step towards the future through added flexibility and adaptation to market and communication globalization. This concept regroups worker and building management needs in a common and manageable communication infrastructure. The basic IB objective is improve worker satisfaction and productivity through enhanced work space environment and communication capabilities.Including the IB concept in the initial planning stages of the modern office building will provide substantial flexibility for the mid and long term life of the building particularly to communication intensive user clients. In most instances it will reduce tenant fit up costs down the road and provide enhanced flexibility and management capabilities while reducing energy consumption. Full implementation ofall IB systems may not be necessary in the initial fit-up of a building. It is, however, mandatory to recognize the basic overall concept and implement a full communication cabling back bone structure from the onset in order to accommodate future user needs. The communication back bone must be distributed to strategically located communication rooms (Telco rooms) on each floor as part of the initial design.Subsequent floor distribution associated to any new or upgraded IB system could be achieved, via the suspended ceiling space with minimal cutting and patching. Justification for the IB concept must be analyzed independently for each building or fit-up and must take into account all derived benefits including increased productivity, flexibility, improved comfort and worker satisfaction as well as potential future savings over the projected life cycle of the building. Application of the basic Intelligent Building co ncept in today’s modern office building should lead to positive Cost to Benefit evaluations when weighed in terms of increased user satisfaction and productivity and improved energy efficiency or flexibility.中文译文智能建筑1、简介智能建筑是要求有一个综合布线和灵活模块化的通信基础设施,通过先进的信息技术和密集的信息服务用户来实现。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

快速外文文献翻译
在科研过程中阅读翻译外文文献是一个非常重要的环节,许多领域高水平的文献都是外文文献,借鉴一些外文文献翻译的经验是非常必要的。

由于特殊原因我翻译外文文献的机会比较多,慢慢地就发现了外文文献翻译过程中的三大利器:Google“翻译”频道、金山词霸(完整版本)和CNKI“翻译助手"。

具体操作过程如下:
1.先打开金山词霸自动取词功能,然后阅读文献;
2.遇到无法理解的长句时,可以交给Google处理,处理后的结果猛一看,不堪入目,可是经过大脑的再处理后句子的意思基本就明了了;
3.如果通过Google仍然无法理解,感觉就是不同,那肯定是对其中某个“常用单词”理解有误,因为某些单词看似很简单,但是在文献中有特殊的意思,这时就可以通过CNKI的“翻译助手”来查询相关单词的意思,由于CNKI的单词意思都是来源与大量的文献,所以它的吻合率很高。

另外,在翻译过程中最好以“段落”或者“长句”作为翻译的基本单位,这样才不会造成“只见树木,不见森林”的误导。

注:
1、Google翻译:/language_tools
google,众所周知,谷歌里面的英文文献和资料还算是比较详实的。

我利用它是这样的。

一方面可以用它查询英文论文,当然这方面的帖子很多,大家可以搜索,在此不赘述。

回到我自己说的翻译上来。

下面给大家举个例子来说明如何用吧比如说“电磁感应透明效应”这个词汇你不知道他怎么翻译,
首先你可以在CNKI里查中文的,根据它们的关键词中英文对照来做,一般比较准确。

在此主要是说在google里怎么知道这个翻译意思。

大家应该都有词典吧,按中国人的办法,把一个一个词分着查出来,敲到google里,你的这种翻译一般不太准,当然你需要验证是否准确了,这下看着吧,把你的那支离破碎的翻译在google里搜索,你能看到许多相关的文献或资料,大家都不是笨蛋,看看,也就能找到最精确的翻译了,纯西式的!我就是这么用的。

2、CNKI翻译:
CNKI翻译助手,这个网站不需要介绍太多,可能有些人也知道的。

主要说说它的有点,你进去看看就能发现:搜索的肯定是专业词汇,而且它翻译结果下面有文章与之对应(因为它是CNKI检索提供的,它的翻译是从文献里抽出来的),很实用的一个网站。

估计别的写文章的人不是傻子吧,它们的东西我们可以直接拿来用,当然省事了。

网址告诉大家,有兴趣的进去看看,你们就会发现其乐无穷!还是很值得用的。

3、网路版金山词霸(不到1M):/6946901637944806
翻译时的速度:
这里我谈的是电子版和打印版的翻译速度,按个人翻译速度看,打印版的快些,因为看电子版本一是费眼睛,二是如果我们用电脑,可能还经常时不时玩点游戏,或者整点别的,导致最终SPPEED变慢,再之电脑上一些词典(金山词霸等)在专业翻译方面也不是特别好,所以翻译效果不佳。

在此本人建议大家购买清华大
学编写的好像是国防工业出版社的那本《英汉科学技术词典》,基本上挺好用。

再加上网站如:google CNKI翻译助手,这样我们的翻译速度会提高不少。

具体翻译时的一些技巧(主要是写论文和看论文方面)
大家大概都应预先清楚明白自己专业方向的国内牛人,在这里我强烈建议大家仔细看完这些头上长角的人物的中英文文章,这对你在专业方向的英文和中文互译水平提高有很大帮助。

我们大家最蹩脚的实质上是写英文论文,而非看英文论文,但话说回来我们最终提高还是要从下大工夫看英文论文开始。

提到会看,我想它是有窍门的,个人总结如下:
1、把不同方面的论文分夹存放,在看论文时,对论文必须做到看完后完全明白(你重视的论文);懂得其某部分讲了什么(你需要参考的部分论文),在看明白这些论文的情况下,我们大家还得紧接着做的工作就是把论文中你觉得非常巧妙的表达写下来,或者是你论文或许能用到的表达摘记成本。

这个本将是你以后的财富。

你写论文时再也不会为了一些表达不符合西方表达模式而烦恼。

你的论文也降低了被SCI或大牛刊物退稿的几率。

不信,你可以试一试
2、把摘记的内容自己编写成检索,这个过程是我们对文章再回顾,而且是对你摘抄的经典妙笔进行梳理的重要阶段。

你有了这个过程。

写英文论文时,将会有一种信手拈来的感觉。

许多文笔我们不需要自己再翻译了。

当然前提是你梳理的非常细,而且中英文对照写的比较详细。

3、最后一点就是我们往大成修炼的阶段了,万事不是说成的,它是做出来的。

写英文论文也就像我们小学时开始学写作文一样,你不练笔是肯定写不出好作品来的。

所以在此我鼓励大家有时尝试着把自己的论文强迫自己写成英文的,一遍不行,可以再修改。

最起码到最后你会很满意。

呵呵,我想我是这么觉得的。

以上三大利器的可替代物(本质上是完善)(为了满足一些特殊需要),如下:Google替代:/ss/fy.htm
金山词霸替代:巴比伦(Babylon)
/soft/3042.html#download
也可以在/sort/sort2031300_indate_DESC_1.html中找相关的辞典代替,最好是具有自动取词的工具;
CNKI:可以找一些专业辞典代替,比如医学电子辞典,电子电子辞典等,也可以是一些插件。

”Microsoft Word 2002 (Office XP) 以后的版本都有翻译功能. 化学化工专业翻译准确率令人刮目相看! Tools/Language ... 不要用什么网上的翻译工具, 都是"不堪入目." ”
Word XP已经成为我们日常办公的常用软件之一,不知道大家注意到没有,在Word XP中新增了一项“翻译”功能,利用它我们可以进行基本的英汉单词互译。

其实也不能说“翻译”是Word XP的新增功能,在Word2000中就已经有了,不过是隐藏的,功能也没有Word XP这么强大。

利用“翻译”功能,我们可以进行基本的英汉单词的互译,相当于一本电子英汉双解词典,如果你在写作过程中遇到想不起来的单词,就可以通过“翻译”把它找出来。

1、单词的翻译
单击“工具”菜单中的“语言”子菜单,选择“翻译”命令,打开“翻译”对话框,然后在“文字”框中输入你要查找的单词。

比如我们在这里输入“教育”,然后选择“中文到英语”,单击“浏览”按钮,在下面的文本框中就会看到翻译结果了。

Word XP不仅会把相应的英文单词给你列出来,而且还包括一些常用的短语以及该单词的同义词等等。

同样,如果我们要把英文单词翻译成汉语,只需在翻译方式中选择“英语到中文”即可。

另外,我们可以通过单击“替换”按钮,用选中的翻译结果替换掉原来的单词,非常方便。

2、整篇文章的翻译
如果要进行整篇文章的翻译,那么仅靠Word XP自带的翻译功能是很难实现的,这时候就必须通过因特网连接到微软公司的网络翻译服务器,由它来对文档进行全文翻译。

方法是打开需要进行全文翻译的WORD文档,在“翻译内容”项目下选择“整个文档”选项,然后在“词典”下拉列表中选择翻译方式,在“通过Web翻译”项目下,选择“(其他翻译服务…)”选项,再单击“浏览”。

这时WORD XP就会自动通过因特网将你要进行翻译的文档提交到微软公司的翻译服务器去进行翻译,稍等一会,就可以将翻译结果显示出来了。

在取词方面,我觉得新编全医药学大辞典非常好用,它可以在PDF中使用,而且针对性强(当然是指生物和医学方面)。

相关文档
最新文档