HAT2169H中文资料

合集下载

海德拉伊克组合产品信息表说明书

<BR>HYDRAULICS GROUP PRODUCTINFORMATION FORM<BR>Subject : Replacement and Mounting Kits Frame Size 3-Series PVplus-UKIssue Number Owner Created By Date of Issue DocumentNumberStefan Schindler/COR/PARKER Stefan Schindler/COR/PARKER11/07/2002SSCR-5FNHYN 1.0Main BodyThis document contains the following information:Exploded view Frame Size 3zSeal Kits "SK"zReplacement Kits "RK"zMounting Kits "MK"zall design changeszPVI-BG3-GB-42-sw.pdf PVI-BG3-GB-41-sw.pdfPVI-BG3-DE-42-sw.pdf PVI-BG3-DE-41-sw.pdfexploded view, PV series, frame size 3, PV063 - PV092correlation between position numbers and replacement kitspos. No.description page replacement kit 1, 2pump body, end cover--3swash plate, finished6swashplate kit4body seal4seal kit5cradle--6trunnion bearing, HX6trunnion bearing kit7spring washer, servo spring8servo spring kit8servo spring8servo spring kit9connector servo spring6swashplate kit10servo spring plug8servo spring kit11swash plate connector6swashplate kit13tapered / contour sleeve8tapered / contour sleeve 14shaft7shaft unit15piston and slipper, crimped6rotating group, set of pistons 16cylinder block6rotating group17retainer spring, cylinder block6rotating group18pilot cover--20distance washer6rotating group21slipper retainer6rotating group22retainer segment6rotating group23valve plate6valve plate26servo piston sleeve7servo piston sleeve27servo piston7servo piston kit28servo piston cover8displacement adjuster kit 29set screw8displacement limiter kit 30thru drive adaptor10mounting kit, thru drive 31thru drive cover--32air bleed valve8air bleed valve35, 36rotation indicator, name plate--37key7shaft unit38snap ring for shaft7shaft unit39snap ring for bore6rotating group41hexagon socket head cap screw, retainer6rotating group42hexagon socket head cap screw, body6connecting bolt kit43hexagon socket head cap screw, pilot6connecting bolt kit44rivet--45guide pin, servo spring8servo spring kit46locator pin cradle--47locator pin, valve plate6valve plate48locator pin, body6connecting bolt kit50washer, servo piston7servo piston kit51washer, cylinder block6rotating group52washer, shaft7shaft unit53, 54magnet cover for ports, thru drive--55protection plug, drain port--57roller bearing, rear7shaft unit58plug, compensator interface4seal kit59plug, feedback4seal kit60chain link6swashplate kit62roller bearing, front7shaft unit63 - 71o-ring4seal kit72shaft seal4seal kit73self sealing lock nut4, 8seal kit, displacement limiter 75 - 77, 78backup rings, retainer for shaft seal4seal kit79 - 81pipe plug4seal kit82hexagon socket countersunk head cap screw6trunnion bearing kit83hexagon socket head cap screw, cradle--84o-ring4seal kit85hexagon socket head cap screw, thru drive10mounting kit, thru drive 87locator pin, thru drive adaptor10mounting kit, thru drive 90o-ring4seal kit91coupling9mounting kit, couplingSK-seal kitPVBG3PV series, frame size 3, PV063 - PV092N seal option NBRV seal option FPME seal option EPRW seal option NBR with PTFE shaft seal (for water glycole)W seal option NBR with PTFE shaft seal (for water glycole)1threads: metric, port option: BSPP3threads: UNC, port option: UNF7threads: metric, port option: ISO 61498threads: UNC, port option: ISO 614942design series 42includes:41body seal, frame size 3581port plug VSTI-10x1-OR-A3C ISO 6149 NBR seal option NBR 58(1)port plug VSTI-10x1-OR-A3C ISO 6149 FPM seal option FPM 58(1)port plug VSTI-10x1-OR-A3C, ISO 6149 EPR seal option EPR 591port plug M 27 x 2 ISO 6149, NBR seal option NBR 59(1)port plug M 27 x 2 ISO 6149, FPM seal option FPM 59(1)port plug M 27 x 2 ISO 6149, EPR seal option EPR 632o-ring 2-010-N552-90; 6,07 x 1,78seal option NBR 63(2)o-ring 2-010-V747-75; 6,07 x 1,78seal option FPM 63(2)o-ring 2-010-E540-80; 6,07 x 1,78seal option EPR 651o-ring 2-129-N552-90; 39,34 x 2,62seal option NBR 65(1)o-ring 2-129-V747-75; 39,34 x 2,62seal option FPM 65(1)o-ring 2-129-E540-80; 39,34 x 2,62seal option EPR 661o-ring 2-032-N552-90; 47,35 x 1,78seal option NBR 66(1)o-ring 2-032-V747-75; 47,35 x 1,78seal option FPM 66(1)o-ring 2-032-E540-80; 47,35 x 1,78seal option EPR 671o-ring 2-042-N552-90; 82,72 x 1,78seal option NBR 67(1)o-ring 2-042-V747-75; 82,72 x 1,78seal option FPM 67(1)o-ring 2-042-E540-80; 82,72 x 1,78seal option EPR 681o-ring 2-224-N552-90; 44,04 x 3,53seal option NBR 68(1)o-ring 2-224-V747-75; 44,04 x 3,53seal option FPM 68(1)o-ring 2-224-E540-80; 44,04 x 3,53seal option EPR 691o-ring 2-032-N552-90; 47,35 x 1,78seal option NBR 69(1)o-ring 2-032-V747-75; 47,35 x 1,78seal option FPM 69(1)o-ring 2-032-E540-80; 47,35 x 1,78seal option EPR 69(1)o-ring 2-146-N552-90; 66,34 x 2,62seal option NBR 69(1)o-ring 2-146-V747-75; 66,34 x 2,62seal option FPM 69(1)o-ring 2-146-E540-80; 66,34 x 2,62seal option EPR 701o-ring 2-137-N552-90; 52,07 x 2,62seal option NBR 70(1)o-ring 2-137-V747-75; 52,07 x 2,62seal option FPM 70(1)o-ring 2-137-E540-80; 52,07 x 2,62seal option EPR 711o-ring 2-031-N552-90; 44,17 x 1,78seal option NBR 71(1)o-ring 2-031-V747-75; 44,17 x 1,78seal option FPM 71(1)o-ring 2-031-E540-80; 44,17 x 1,78seal option EPR 721shaft seal BABSL 0,5 45 x 62 x 7-NBR seal option NBR 72(1)shaft seal BABSL 0,5 45 x 62 x 7-FPM seal option FPM 72(1)shaft seal PTFE, frame size 3 with EPR o-ring seal option EPR, S 72(1)shaft seal PTFE, frame size 3seal option P, W 731self sealing lock nut M 12 x 1,5; SEAL LOCK751backup ring 8-129-N300-90; 40,16 x 2,18seal option NBR 75(1)backup ring 8-129-V709-90; 40,16 x 2,18seal option FPM 75(1)backup ring 8-129-E652-90; 40,16 x 2,18seal option EPR761backup ring 8-031-N300-90; 44,91 x 1,35seal option NBR 76(1)backup ring 8-031-V709-90; 44,91 x 1,35seal option FPM 76(1)backup ring 8-031-E652-90; 44,91 x 1,35seal option EPR 771backup ring 8-031-N300-90; 44,91 x 1,35seal option NBR 77(1)backup ring 8-031-V709-90; 44,91 x 1,35seal option FPM 77(1)backup ring 8-031-E652-90; 44,91 x 1,35seal option EPR 781J64 x 2 DIN 472, retainer for shaft seal791port plug VSTI R1/2" ED NBR NBR, threads: 1 79(1)port plug VSTI R1/2" ED FPM FPM, threads: 1 79(1)port plug VSTI R1/2" ED EPR EPR, threads: 1 79(1)port plug 10HP50NS-NBR, 7/8-14 UNF NBR, threads: 3 79(1)port plug 10HP50NS-FPM, 7/8-14 UNF FPM, threads: 3 79(1)port plug 10HP50NS-EPR, 7/8-14 UNF EPR, threads: 3 79(1)port plug VSTI-22 x 1,5-OR-A3C ISO 6149 NBR NBR, threads: 7, 8 79(1)port plug VSTI-22 x 1,5-OR-A3C ISO 6149 FPM FPM, threads: 7, 8 79(1)port plug VSTI-22 x 1,5-OR-A3C ISO 6149 EPR EPR, threads: 7, 8 801port plug VSTI R1/4" ED NBR NBR, threads: 1 80(1)port plug VSTI R1/4" ED FPM FPM, threads: 1 80(1)port plug VSTI R1/4" ED EPR EPR, threads: 1 80(1)port plug 4HP50NS-NBR, 7/16-20 UNF NBR, threads: 3 80(1)port plug 4HP50NS-FPM, 7/16-20 UNF FPM, threads: 3 80(1)port plug 4HP50NS-EPR, 7/16-20 UNF EPR, threads: 3 80(1)port plug VSTI-12 x 1,5-OR-A3C ISO 6149 NBR NBR, threads: 7, 8 80(1)port plug VSTI-12 x 1,5-OR-A3C ISO 6149 FPM FPM, threads: 7, 8 80(1)port plug VSTI-12 x 1,5-OR-A3C ISO 6149 EPR EPR, threads: 7, 8 811port plug VSTI R3/4" ED NBR NBR, threads: 1 81(1)port plug VSTI R3/4" ED FPM FPM, threads: 1 81(1)port plug VSTI R3/4" ED EPR EPR, threads: 1 81(1)port plug 12HP50NS-NBR, 1 1/16-12 UNF NBR, threads: 3 81(1)port plug 12HP50NS-FPM, 1 1/16-12 UNF FPM, threads: 3 81(1)port plug 12HP50NS-EPR, 1 1/16-12 UNF EPR, threads: 3 81(1)port plug VSTI-27 x 2-OR-A3C ISO 6149 NBR NBR, threads: 7, 8 81(1)port plug VSTI-27 x 2-OR-A3C ISO 6149 FPM FPM, threads: 7, 8 81(1)port plug VSTI-27 x 2-OR-A3C ISO 6149 EPR EPR, threads: 7, 8 841o-ring 2-036-N552-90; 60,05 x 1,78seal option NBR 84(1)o-ring 2-036-V747-75; 60,05 x 1,78seal option FPM 84(1)o-ring 2-036-E540-80; 60,05 x 1,78seal option EPR 841o-ring 2-041-N552-90; 75,92 x 1,78seal option NBR 84(1)o-ring 2-041-V747-75; 75,92 x 1,78seal option FPM 84(1)o-ring 2-041-E540-80; 75,92 x 1,78seal option EPR 841o-ring 2-042-N552-90; 82,27 x 1,78seal option NBR 84(1)o-ring 2-042-V747-75; 82,27 x 1,78seal option FPM 84(1)o-ring 2-042-E540-80; 82,27 x 1,78seal option EPR 841o-ring 2-044-N552-90; 94,97 x 1,78seal option NBR 84(1)o-ring 2-044-V747-75; 94,97 x 1,78seal option FPM 84(1)o-ring 2-044-E540-80; 94,97 x 1,78seal option EPR 841o-ring 2-048-N552-90; 120,37 x 1,78seal option NBR 84(1)o-ring 2-048-V747-75; 120,37 x 1,78seal option FPM 84(1)o-ring 2-048-E540-80; 120,37 x 1,78seal option EPR 841o-ring 2-163-N552-90; 152,07 x 2,62seal option NBR 84(1)o-ring 2-163-V747-75; 152,07 x 2,62seal option FPM 84(1)o-ring 2-163-E540-80; 152,07 x 2,62seal option EPR 841o-ring 2-164-N552-90; 158,42 x 2,62seal option NBR 84(1)o-ring 2-164-V747-75; 158,42 x 2,62seal option FPM 84(1)o-ring 2-164-E540-80; 158,42 x 2,62seal option EPR 901o-ring 2-012-N552-90; 9,25 x 1,78seal option NBR 90(1)o-ring 2-012-V747-75; 9,25 x 1,78seal option FPM 90(1)o-ring 2-012-E540-80; 9,25 x 1,78seal option EPR 2611o-ring 6-346-N552-90; 9,4 x 2,1seal option NBR 261(1)o-ring 6-346-V747-75; 9,4 x 2,1seal option FPM 261(1)o-ring 6-346-E540-80; 9,4 x 2,1seal option EPRPVBG3PV series, frame size 3, PV063 - PV092VT Verbindungsteile-SatzM metric versionS SAE/UNC version41design series 41 - 42includes:424hexagon socket head cap screw M 16 x 75 DIN 912 12.9threads: M 42(4)hexagon socket head cap screw 5/8" - 11 UNC x 3"threads: S 434hexagon socket head cap screw M 5 x 12 DIN 912 12.9threads: M 43(4)hexagon socket head cap screw Nr. 10 - 24 UNC x 1/2"threads: S 482locating pin 8 M6 x 16 DIN 7 StRK-spare parts kitPVBG3PV series, frame size 3, PV063 - PV092GLE trunnion bearing unit41design series 41 - 42includes:62trunnion bearing HX, frame size 3822hexagon socket countersunk head cap screw M 5 x 10 DIN 7991, c RK-spare parts kitPVBG3PV series, frame size 3, PV063 - PV092ROG rotating group41design series 41 - 42includes:159piston and slipper, crimped161cylinder block with bronce sleeves171retainer spring, cylinder block204distance washer211slipper retainer plate222retainer segment391snap ring for bores, 56 x 2 DIN 472414hexagon socket head cap screw M 6 x 25 DIN 912 12.9 TUF511washer SS 40 x 50 x 2,5 DIN 988521washer SS 45 x 56 x 2 DIN 988RK-spare parts kitPVBG3PV series, frame size 3, PV063 - PV092KOS piston set41design series 41 - 42includes:159piston and slipper, crimpedRK-spare parts kitPVBG3PV series, frame size 3, PV063 - PV092SS valve plateR rotation clockwiseL rotation counter-clockwise41design series 41 - 42includes:231valve plate clockwise rotation, frame size 3rotation R 23(1)valve plate counter-clockwise rotation, frame size 3rotation L 471locating pin 6 M6 x 14 DIN 7 StRK-spare parts kitPVBG3PV series, frame size 3, PV063 - PV092SRS swash plate kit41design series 41 - 42includes:31swash plate, finished, frame size 391connector servo spring, frame size 3111connector swash plate, frame size 3, Keilstop601chain link 548 - 11 DIN 8187PVBG3PV series, frame size 3, PV063 - PV092WP shaft unit, keyedWZ shaft unit, splinedM metric versionS SAE/UNC version41design series 41 - 42includes:141shaft, keyed, metric, frame size 3keyed, metric14(1)shaft, keyed, SAE, frame size 3keyed, SAE14(1)shaft, splined, metric, frame size 3splined, metric 14(1)shaft, splined, SAE, frame size 3splined, SAE371key A12 x 8 x 80 DIN 6885 St keyed, metric37(1)key 11,11 x 11,11 x 80keyed, SAE381snap ring for shaft, 45 x 1,75 DIN 471522washer PS 45 x 56 x 2 DIN 988571roller bearing, RNU - 2206 - ECP,621roller bearing NUP - 2209 - ECP,RK-spare parts kitPV063PV series, frame size 3, PV063PV080PV series, frame size 3, PV080PV092PV series, frame size 3, PV092HE displacement limiter, adjustableN seal option NBRV seal option FPME seal option EPR41design series 41 - 42includes:281port plug M 55 x 2291set screw M 12 x 1,5; displacement 63 cm³/U displacement 063 29(1)set screw M 12 x 1,5; displacement 80 cm³/U displacement 080 29(1)set screw M 12 x 1,5; displacement 92 cm³/U displacement 092 701o-ring 2-137-N552-90; 52,07 x 2,62seal option NBR 70(1)o-ring 2-137-V747-75; 52,07 x 2,62seal option FPM 70(1)o-ring 2-137-E540-80; 52,07 x 2,62seal option EPR 731self sealing lock nut M 12 x 1,5; SEAL LOCKRK-spare parts kitPVBG3PV series, frame size 3, PV063 - PV092SB servo piston sleeveN seal option NBRV seal option FPME seal option EPR42design series 41 - 42includes:261servo piston sleeve, frame size 3661o-ring 2-032-N552-90; 47,35 x 1,78seal option NBR 66(1)o-ring 2-032-V747-75; 47,35 x 1,78seal option FPM 66(1)o-ring 2-032-E540-80; 47,35 x 1,78seal option EPR 711o-ring 2-031-N552-90; 44,17 x 1,78seal option NBR 71(1)o-ring 2-031-V747-75; 44,17 x 1,78seal option FPM 71(1)o-ring 2-031-E540-80; 44,17 x 1,78seal option EPR 761backup ring 8-031-N300-90; 44,91 x 1,35seal option NBR 76(1)backup ring 8-031-V709-90; 44,91 x 1,35seal option FPM 76(1)backup ring 8-031-E652-90; 44,91 x 1,35seal option EPR 771backup ring 8-031-N300-90; 44,91 x 1,35seal option NBR 77(1)backup ring 8-031-V709-90; 44,91 x 1,35seal option FPM 77(1)backup ring 8-031-E652-90; 44,91 x 1,35seal option EPRPVBG3PV series, frame size 3, PV063SKS servo piston kit42design series 42includes:271servo piston frame size 3501washer SS 17 x 24 x 1,5 DIN 988RK-spare parts kitPVBG3PV series, frame size 3, PV063 - PV092RFS servo spring kit41design series 41 - 42includes:71spring washer servo spring frame size 381servo spring frame size 3101servo spring cover frame size 3451roll pin Connex LG 18 x 10032RK-spare parts kitPV000PV series, alle frame sizenEV air bleed valveN seal option NBRV seal option FPME seal option EPR40design series 41 - 42includes:2601body, air bleed valvegehäuse2611o-ring 6-346-N552-90; 9,4 x 2,1seal option NBR 261(1)o-ring 6-346-V747-75; 9,4 x 2,1seal option FPM 261(1)o-ring 6-346-E540-80; 9,4 x 2,1seal option EPR 2621spring, air bleed valve2631ball Ø 6,35, tungston carbide, class G202641roll pin, 2 x 10 DIN 148113RK-spare parts kitPVBG3PV series, frame size 3, PV063 - PV092KH tapered / contour sleeve0tapered sleeve for standard pumpsG contour sleeve for horse power comp. pumps, 11 kWH contour sleeve for horse power comp. pumps, 15 kWK contour sleeve for horse power comp. pumps, 18,5 kWM contour sleeve for horse power comp. pumps, 22 kWS contour sleeve for horse power comp. pumps, 27 kWT contour sleeve for horse power comp. pumps, 37 kWU contour sleeve for horse power comp. pumps, 45 kW41design series 41 - 42includes:131tapered sleeve frame size 313(1)contour sleeve frame size 3, 11 kW horse power code G 13(1)contour sleeve frame size 3, 15 kW horse power code H 13(1)contour sleeve frame size 3, 18,5 kW horse power code K 13(1)contour sleeve frame size 3, 22 kW horse power code M 13(1)contour sleeve frame size 3, 30 kW horse power code S 13(1)contour sleeve frame size 3, 37 kW horse power code Tpos.qty ordering code description remark MK-mounting kit: coupling for thru drive pumpPVBG3PV series, frame size 3, PV063 - PV092K01second pump: metric splined shaft N25 x 1,5 x 15 DIN 5480K02second pump: metric splined shaft N32 x 1,5 x 20 DIN 5480K03second pump: metric splined shaft N40 x 1,5 x 25 DIN 5480K11second pump: SAE splined shaft 9T16/32DP, flat root, side fitK12second pump: SAE splined shaft 11T16/32DP, flat root, side fitK13second pump: SAE splined shaft 13T16/32DP, flat root, side fitK14second pump: SAE splined shaft 15T16/32DP, flat root, side fitK15second pump: SAE splined shaft 14T12/24DP, flat root, side fitK16second pump: SAE splined shaft 17T12/24DP, flat root, side fitK17second pump: SAE splined shaft 13T8/16DP, flat root, side fitK20second pump: metric keyed shaft Ø 12 mmK21second pump: metric keyed shaft Ø 16 mmK22second pump: metric keyed shaft Ø 18 mm41design series 41 - 42includes:911coupling, metric, N40 x 1,5 x 25 DIN 5480shaft K0391(1)coupling, metric, N32 x 1,5 x 20 DIN 5480shaft K02, K20, K21, K2291(1)coupling, metric, N25 x 1,5 x 15 DIN 5480shaft K01 91(1)coupling, SAE, 13T8/16DP, flat root, side fit shaft K17 91(1)coupling, SAE, 17T12/24DP, flat root, side fit shaft K16 91(1)coupling, SAE, 14T12/24DP, flat root, side fit shaft K15 91(1)coupling, SAE, 15T16/32DP, flat root, side fit shaft K14 91(1)coupling, SAE, 13T16/32DP, flat root, side fit shaft K13 91(1)coupling, SAE, 11T16/32DP, flat root, side fit shaft K12 91(1)coupling, SAE, 9T16/32DP, flat root, side fit shaft K11 92(1)adaptor for keyed shaft Ø 18 (also needed: pos 91, shaft K02)shaft K22 92(1)adaptor for keyed shaft Ø 16 (also needed: pos 91, shaft K02)shaft K21 92(1)adaptor for keyed shaft Ø 12 (also needed: pos 91, shaft K02)shaft K20pos.qty ordering codedescriptionremarkMK-mounting kit, adaptor for second pump PVBG3PV series, frame size 3, PV063 - PV092 A second pump: SAE A, Ø 82,55 B second pump: SAE B, Ø 101,6 C second pump: SAE C, Ø 127 D second pump: SAE D, Ø 152,4 G second pump: metric Ø 63 H second pump: metric Ø 80 J second pump: metric Ø 100 K second pump: metric Ø 125 L second pump: metric Ø 160T for pump prepared for thru drive (with cover plate) M metric screws S UNC screws N seal option NBR V seal option FPM E seal option EPR41design series 41 - 42includes:301thru drive adaptor SAE A, Ø 82,55, metric screws pilot: A, screws: M 30(1)thru drive adaptor SAE A, Ø 82,55, UNC screws pilot: A, screws: S 30(1)thru drive adaptor SAE B, Ø 101,6, metric screws pilot: B, screws: M 30(1)thru drive adaptor SAE B, Ø 101,6, UNC screws pilot: B, screws: S 30(1)thru drive adaptor SAE C, Ø 127, metric screws pilot: C, screws: M 30(1)thru drive adaptor SAE C, Ø 127, UNC screws pilot: C, screws: S 30(1)thru drive adaptor SAE D, Ø 152,4, metric screws pilot: D, screws: M 30(1)thru drive adaptor SAE D, Ø 152,4, UNC screws pilot: D, screws: S 30(1)thru drive adaptor: metric Ø 63, metric srews pilot: G, screws: M 30(1)thru drive adaptor: metric Ø 63, UNC srews pilot: G, screws: S 30(1)thru drive adaptor: metric Ø 80, metric srews pilot: H, screws: M 30(1)thru drive adaptor: metric Ø 80, UNC srews pilot: H, screws: S 30(1)thru drive adaptor: metric Ø 100, metric srews pilot: J, screws: M 30(1)thru drive adaptor: metric Ø 100, UNC srews pilot: J, screws: S 30(1)thru drive adaptor: metric Ø 125, metric srews pilot: K, screws: M 30(1)thru drive adaptor: metric Ø 125, UNC srews pilot: K, screws: S 30(1)thru drive adaptor: metric Ø 160, metric srews pilot: L, screws: M 30(1)thru drive adaptor: metric Ø 160, UNC srews pilot: L, screws: S 311cover plate for thru driveoption T691o-ring 2-146-N552-90; 66,34 x 2,62seal option NBR 69(1)o-ring 2-146-V747-75; 66,34 x 2,62seal option FPM 69(1)o-ring 2-146-E540-80; 66,34 x 2,62seal option EPRscrews, washers etc. to fix the second pump are not included in kitsReplacement and mounting kits, PV series, frame size 3, PV063 - PV092file: PVI302-GB-42.xls design series 42pos.qty ordering code description remark 841o-ring 2-036-N552-90; 60,05 x 1,78pilot: G, NBR 84(1)o-ring 2-036-V747-75; 60,05 x 1,78pilot: G, FPM 84(1)o-ring 2-036-E540-80; 60,05 x 1,78pilot: G, EPR 84(1)o-ring 2-041-N552-90; 75,92 x 1,78pilot: H, NBR 84(1)o-ring 2-041-V747-75; 75,92 x 1,78pilot: H, FPM 84(1)o-ring 2-041-E540-80; 75,92 x 1,78pilot: H, EPR841o-ring 2-042-N552-90; 82,27 x 1,78pilot: A, NBR 84(1)o-ring 2-042-V747-75; 82,27 x 1,78pilot: A, FPM 84(1)o-ring 2-042-E540-80; 82,27 x 1,78pilot: A, EPR84(1)o-ring 2-044-N552-90; 94,97 x 1,78pilot: B, J, NBR 84(1)o-ring 2-044-V747-75; 94,97 x 1,78pilot: B, J, FPM 84(1)o-ring 2-044-E540-80; 94,97 x 1,78pilot: B, J, EPR 84(1)o-ring 2-048-N552-90; 120,37 x 1,78pilot: C, K, NBR 84(1)o-ring 2-048-V747-75; 120,37 x 1,78pilot: C, K, FPM 84(1)o-ring 2-048-E540-80; 120,37 x 1,78pilot: C, K, EPR 84(1)o-ring 2-163-N552-90; 152,07 x 2,62pilot: D, NBR84(1)o-ring 2-163-V747-75; 152,07 x 2,62pilot: D, FPM84(1)o-ring 2-163-E540-80; 152,07 x 2,62pilot: D, EPR84(1)o-ring 2-164-N552-90; 158,42 x 2,62pilot: L, NBR84(1)o-ring 2-164-V747-75; 158,42 x 2,62pilot: L, FPM84(1)o-ring 2-164-E540-80; 158,42 x 2,62pilot: L, EPR854hexagon socket head cap screw M 12 x 35 DIN 912 12.9screws: M85(4)hexagon socket head cap screw 1/2" - 13 UNC x 1 1/4" 12.9screws: S872locating pin 8 M6 x 16 DIN 7not for option T 972hexagon socket head cap screw M 10 x 20 DIN 912 12.9option T, screws: M 97(2)hexagon socket head cap screw 3/8" - 16 UNC x 3/4" 12.9option T, screws: Spage 11 of 1123.06.2003。

AVH316K中文资料

A PLUS MAKE YOUR PRODUCTION A-PLUSAVxx16K SeriesDATA SHEETA PLUS INTEGRATED CIRCUITS INC.Address:3 F-10, No. 32, Sec. 1, Chenggung Rd., Taipei, Taiwan 115, R.O.C.(115)台北市南港區成功路㆒段32號3樓之10. TEL: 886-2-2782-9266FAX: 886-2-2782-9255WEBSITE : http: // Sales E-mail:sales@Technology E-mail: service@1. GENERAL DESCRIPTION:The AVH316K , AV0716K , AV1416K , AV2116K , AV2816K and AV4216K are single-chip voice synthesizing CMOS IC. They are low cost with proper functions and can synthesize voice up to 3.5, 7, 14, 21, 28 and 42 seconds, using Aplus 5-bit LOGPCM algorithm. Cus tom er speech data can be programmed into ROM by changing one mask during the device fabrication. Besides, not only the very flexible and functional PowerIO pins (IO1/IO2) are available for user to apply in various applications, but also an interactive development tool “EzSpeech” is ready for user-friendly programming.2. FEATURES:(1). Single power supply can operate from 2.4V to 6.4V (in this range, user can set Rosc as a fixed value).(2). The total voice duration is about 3.5, 7, 14, 21, 28 and 42 seconds those can be partitioned up to 32voice_sections. Each voice_section length is flexible. Besides, there are additional 32 mute_sections.(3). Voice length can be individually up to 3.5, 7, 14, 21, 21 and 21 seconds and voice+mute length can beindividually up to 21 seconds at 6kHz sample rate for each voice_section.(4). Total 96 voice_steps are available for 16 sub_tables. The number of voice_step for each sub_table isflexible, but maximum is 96. For each voice_step, it can specify one voice_section, playback speed and IO1/IO2 output enable options if IO1/IO2 are set as output.(5). Built-in variable oscillator, 16 kinds of playback speed option : ( 3.9k ~ 14.0kHz)A B C D E F G H14.0kHz 12.0kHz 10.5kHz 9.3kHz 8.3kHz 7.5kHz 7.0kHz 6.4kHzI J K L M N O P6.0kHz 5.5kHz 5.2kHz 4.9kHz 4.6kHz 4.4kHz 4.1kHz 3.9kHz(6). IO1 or IO2 can be either input or output pin (Mask option).(7). Optional “Three Triggers Input” (all OKY, IO1 and IO1 are input), “Two Triggers Input” (OKY and IO1 areinput, IO2 is output), or “One Trigger Input” (OKY is input, IO1 and IO2 are output).(A). Each input pin has mask options for Edge/Level, Hold/Unhold and Retrigger/Irritrigger trigger modes.(B). OKY input can choose One-Key Sequential or Random for maximum 16 sub_tables. At One-KeySequential, the Reset function of sub_table sequence can be chosen when other keys are triggered.(C). OKY and IO1 input can choose Toggle On/Off function or not.(D). OKY input can choose CDS+1M、CDS、1M pull-low、10M pull low or floating input type.IO1 and IO2 input can choose CDS+1M、CDS、1M pull-low or floating input type.(E). Each input can choose debounce time: Long debounce for push buttons. Short debounce for fastswitches.(F). Input pin priority：OKY > IO1 > IO2.(8). IO1/IO2 have 7 kinds of output option :(A). Stop_High pulse : high active stop pulse output whenever device stop playing.(B). Busy_High active : high active signal output during playing.(C). Busy_Low active : low active signal output during playing.(D). LED 3Hz flash : 3Hz sink signal output for driving LED during playing at 6kHz sample rate.(E). LED 6Hz flash : 6Hz sink signal output for driving LED during playing at 6kHz sample rate.(F). LED dynamic 2/4 : dynamic sink signal output for driving LED during playing.(G). Synchronous output : arbitrary output with voice, user can edit the Sync signal by PowerIO editor.※Where (D) and (E) is the LED flash rate at 6kHz sample rate. For different sample rate, the LED flash rate is different from original 3Hz or 6Hz.(9). PWM1 and PWM2 can directly drive buzzer or 8, 16, 32 or 64 ohms speaker.(10). The voice length in voice_section must be the multiple of 200Hex, and the mute length in voice_sectionmust be the multiple of 80Hex. But when the voice length in voice_section of “voice + mute” don’t fully use the last 200Hex, the unused voice length is set as mute and combined with the followed mute time. (11). In pure mute voice_section of M00~M31, the mute length must be the multiple of 80Hex. The maximummute length is up to 21 seconds at 6kHz sample rate for each mute voice_section.(12). Oscillator selection:(A). External oscillator: Connect OSC pin to Vdd with a resistor, Rosc.(B). Internal oscillator: Connect OSC pin to GND. (Not suggested because of frequency shift and systemstability)※Input Type Description:Option DescriptionCDS + 1M Normal selection for button trigger.Only 1M pull-low resistance when key-pressed, and 1M+300K(parallel) pull-low resistance when key-released.CDS Internal 300K ohms pull-low resistance, usually for photo-resistor trigger.1M pull-low Internal 1M ohms pull-low resistance, reserve for some special applications. 10M pull-low Internal 10M ohms weak pull-low, usually for touching trigger.Floating No internal resistor connection, usually connected to other output pin or connected to GND by an external resistor.* 10M pull-low option is not available for IO1/IO2 input.1. ㆒般規格:AVH316K、AV0716K、AV1416K、AV2116K、AV2816K、AV4216K ，皆為單晶片晶非低具定另頻放合成 IC，他們都是非常低成本，同時具有相當實用功能的語音 IC 產品。

HAT2279H中文资料

HAT2279HSilicon N Channel Power MOS FETPower SwitchingREJ03G1464-0200Rev.2.00Jul 05, 2006Features• High speed switching• Capable of 4.5 V gate drive• Low drive current• High density mounting• Low on-resistanceR DS(on) = 9.5 mΩ typ. (at V GS = 10 V)• Lead FreeOutlineAbsolute Maximum Ratings(Ta = 25°C)UnitRatingsItem SymbolDrain to source voltage V DSS 80 VGate to source voltage V GSS±20 VDrain current I D 30 A Drain peak current I D(pulse)Note1 120 ABody-drain diode reverse drain current I DR 30 A Avalanche current I AP Note 2 25 A Avalanche energy E AR Note 2 83 mJ Channel dissipation Pch Note3 25 W Channel to Case Thermal Resistance θch-C 5 °C/WChannel temperature Tch 150 °CStorage temperature Tstg –55 to +150 °CNotes: 1. PW ≤ 10 µs, duty cycle ≤ 1%2. Value at Tch = 25°C, Rg ≥ 50 Ω3. Tc = 25°CElectrical Characteristics(Ta = 25°C)Item Symbol Min Typ Max Unit Test ConditionsDrain to source breakdown voltage V (BR)DSS 80 — — V I D = 10 mA, V GS = 0 Gate to source leak current I GSS — — ±0.5 µA V GS = ±20 V, V DS = 0 Zero gate voltage drain current I DSS — — 1 µA V DS = 80 V, V GS = 0 Gate to source cutoff voltage V GS(off) 0.8 — 2.3 V V DS = 10 V, I D = 1 mAR DS(on) — 9.5 12 m Ω I D = 15 A, V GS = 10 V Note4 Static drain to source on stateresistance R DS(on) — 11 15 m Ω I D = 15 A, V GS = 4.5 V Note4Forward transfer admittance |y fs | 42 70 — S I D = 15 A, V DS = 10 V Note4 Input capacitance Ciss — 3520 — pF Output capacitance Coss — 410 — pF Reverse transfer capacitance Crss — 160 — pF V DS = 10 V, V GS = 0, f = 1 MHz Gate Resistance Rg — 0.5 — Ω Total gate charge Qg — 60 — nC Gate to source charge Qgs — 9.5 — nC Gate to drain charge Qgd — 9.0 — nC V DD = 25 V, V GS = 10 V, I D = 30 A Turn-on delay time t d(on) — 9.5 — ns Rise time t r — 14.5 — nsTurn-off delay time t d(off) — 56 — ns Fall timet f — 9.5 — ns V GS = 10 V, I D = 15 A,V DD ≅ 30 V, R L = 2 Ω, Rg = 4.7 Ω Body–drain diode forward voltage V DF — 0.83 1.08 V IF = 30 A, V GS = 0 Note4Body–drain diode reverse recovery timet rr — 50 — ns IF = 30 A, V GS = 0di F / dt = 100 A/ µsNotes: 4. Pulse testMain CharacteristicsPackage DimensionsOrdering InformationPart Name Quantity Shipping ContainerHAT2279H-EL-E 2500pcs TapingNote: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product. RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology (Shanghai) Co., Ltd.Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001Renesas Technology Korea Co., Ltd.Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, KoreaTel: <82> (2) 796-3115, Fax: <82> (2) 796-2145Renesas Technology Malaysia Sdn. BhdUnit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, MalaysiaTel: <603> 7955-9390, Fax: <603> 7955-9510© 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.。

HAT2029中文资料

Outline
ADE-208-525D (Z) 5th. Edition
February 1999
SOP–8
78 DD
8 7 65
1 234 56 DD
2
4
G
G
S1
MOS1
S3
MOS2
1, 3
Source
2, 4
Gate
5, 6, 7, 8 Drain
HAT2029R
Absolute Maximum Ratings (Ta = 25°C)
Switching Characteristics 500
200
t d(off)
100
tf
50
tr
t d(on) 20
10
5 0.1
VGS = 4 V, V DD = 10 V PW = 3 µs, duty < 1 %
0.2 0.5 1 2
5 10
Drain Current I D (A)
Drain to Source Voltage V DS (V)
Drain to Source Voltage V DS(on) (V)
Drain to Source Saturation Voltage vs. Gate to Source Voltage
0.5 Pulse Test
0.4
0.3
0.2
ID=5A 0.1
2A 1A
0
2
4
6
8
10
Gate to Source Voltage V GS (V)
7.5
A
Channel dissipation
Pch Note2
2

Dell E1916HV E1916HL E1916HM E2016HV E2016HL E2016

用户指南Dell E1916HVDell E1916HLDell E1916HMDell E2016HVDell E2016HLDell E2016HMDell E2216HVDell E2216HVM认证型号：E1916HV / E1916HL / E1916HM / E2016HV / E2016HL / E2016HM / E2216HV© 2015~2020 Dell Inc. 2020 – 12 Rev. A10目录关于您的显示器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5物品清单. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5产品特性. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6识别部件和控制 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7显示器规格 (9)即插即用功能 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11液晶显示器质量和像素政策 . . . . . . . . . . . . . . . . . . . . . . . . . . 18维护指南 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18设置显示器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19安装底座 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19连接显示器 (20)管理电线. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20卸下显示器底座 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21壁挂（可选） . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22操作显示器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23打开显示器电源 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23使用前面板控制 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23使用屏幕显示(OSD)菜单 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25设置最大分辨率 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49使用倾斜 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513故障排除 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52自检 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52内置诊断 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53常见问题 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54产品特定问题 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Dell Soundbar问题 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56附录 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58安全说明 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 FCC声明（仅限美国）和其他管制信息 (58)中国能源效率标识 (58)联系Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58能源标签和产品参数信息表适用的欧盟产品数据库. . . . . . . . . . . . .594关于您的显示器物晶清单此显示器在出厂时包括如下所示的全部组件。

HAT2164H中文资料

HAT2164HSilicon N Channel Power MOS FET Power SwitchingREJ03G0003-0400ZRev.4.00Apr.09.2003 Features•Capable of 4.5 V gate drive•Low drive current•High density mounting•Low on-resistanceR DS(on) = 2.5 mΩ typ. (at V GS = 10 V)OutlineAbsolute Maximum Ratings(Ta = 25°C)Item Symbol Ratings Unit Drain to source voltage V DSS30V Gate to source voltage V GSS±20V Drain current I D60A Drain peak current I D(pulse)240A Body-drain diode reverse drain current I DR60A Avalanche current I AP30A Avalanche energy E AR Note 290mJ Channel dissipation Pch30W Channel to Case Thermal Resistanceθch-C 4.17°C/W Channel temperature Tch150°C Storage temperature Tstg–55 to +150°C Notes: 1.PW ≤ 10 µs, duty cycle ≤ 1%2.Value at Tch = 25°C, Rg ≥ 50 Ω3.Tc = 25°CElectrical Characteristics(Ta = 25°C)Item Symbol Min Typ Max Unit Test ConditionsDrain to source breakdown voltage V(BR)DSS30——V I D = 10 mA, V GS = 0Gate to source breakdown voltage V(BR)GSS± 20——V I G = ±100 µA, V DS = 0 Gate to source leak current I GSS——±10µA V GS = ±16 V, V DS = 0 Zero gate voltage drain current I DSS——1µA V DS = 30 V, V GS = 0Gate to source cutoff voltage V GS(off)0.8— 2.3V V DS = 10 V, I D = 1 mA Static drain to source on state R DS(on)— 2.5 3.1mΩI D = 30 A, V GS = 10 V resistance R DS(on)— 3.0 4.4mΩI D = 30 A, V GS = 4.5 V Note4 Forward transfer admittance|y fs|78130—S I D = 30 A, V DS = 10 V Input capacitance Ciss—7600—pF V DS = 10 VOutput capacitance Coss—1050—pF V GS = 0Reverse transfer capacitance Crss—470—pF f = 1 MHzGate Resistance Rg—0.5—ΩTotal gate charge Qg—50—nc V DD = 10 VGate to source charge Qgs—22—nc V GS = 4.5 VGate to drain charge Qgd—10—nc I D = 60 ATurn-on delay time t d(on)—18—ns V GS = 10 V, I D = 30 A Rise time t r—60—ns V DD≅ 10 VTurn-off delay time t d(off)—65—ns R L = 0.33 ΩFall time t f—15—ns Rg = 4.7 ΩBody–drain diode forward voltage V DF—0.82 1.07V IF = 60 A, V GS = 0Body–drain diode reverse recovery time t rr—40—ns IF = 60 A, V GS = 0diF/ dt = 100 A/ µsNotes: 4.Pulse testMain CharacteristicsPackage DimensionsColophon 0.0。

KUTAI ADVR-08 Universal Hybrid Analog-Digital Volt

KUTAI ELECTRONICS INDUSTRY CO., LTD.TEL : +886-7-8121771FAX : +886-7-8121775Website : Headquarters : No.3, Lane 201, Chien Fu St., Chyan Jenn Dist., Kaohsiung 80664, TAIWANADVR-08Universal Hybrid Analog-Digital Voltage Regulator Operation ManualAn Universal Hybrid Analog/Digital 2 lines sensing 8 Amp AVR with multiple power input capability such as Full Harmonic (Compound Windings), Harmonic + Auxiliary Winding, PMG and SHUNT.Compatible with Leroy Somer* R438, R448, R449 and more.Use with KUTAI IVT-1260 / IVT-2460 add-on module can boost generator motor starting capacity.SECTION 1 : SPECIFICATIONSensing Input (E1, E2) Static Power DissipationVoltage 110 - 480 Vac, 1 phase Max.6 watts90 - 130 Vac @ 110 Vac180 - 260 Vac @ 220 Vac Burden in SHUNT & PMG Wiring340 - 520 Vac @ 380 Vac 880 VA @ power input 110 Vac Frequency 50/60 Hz, DIP switch setting 1760 VA @ power input 220 VacPower Input (X1, X2, Aux1)Quadrature Droop Input (S1, S2, S3)Voltage 40 - 300 Vac, 1 phase / 3 phase CT 5A (S1-S2) or 1A (S2-S3) greater than 5VA Frequency 50 - 500 Hz Max. +/- 5% @ P.F +/- 0.71 phase (X1、X2) / 3 phase (X1、X2、Aux1)Analogue Voltage Input (A1, A2)Auxiliary Input (Aux1, Aux2)Input resistance greater than 2K ohmsVoltage 40 - 300 Vac, 1 phase Max. Input +/- 5 VdcFrequency 50 - 500 Hz Sensitivity +/- 25% Generator Volts (adjustable)Excitation Output (F+, F-)Under Frequency Protection (Factory Presets) Voltage Max. 63 Vdc @ power input 110 Vac 50 Hz system presets knee point at 45 HzMax. 125 Vdc @ power input 220 Vac 60 Hz system presets knee point at 55 Hz Current Continuous 8AIntermittent 12A for 10 secs. Over Excitation ProtectionResistance ≧8 ohms @ power input 110 Vac Set point 170 Vdc +/- 5 % @ power input 220 Vac ≧16 ohms @ power input 220 VacFuse Spec. Slow blow 5 x 20mm S505-10A Voltage Thermal DriftLess than 3% at temperature range -40 to +70 ˚C External Voltage Adjustment (VR1, VR2)Max. +/- 4% @ 500 ohms 1 watt potentiometer Under-Frequency Knee Point Thermal DriftMax. +/- 8% @ 1K ohm 1 watt potentiometer Less than +/- 0.1 Hz at -40 to +70 ˚CVoltage Regulation EnvironmentLess than +/- 0.5% ( with 4% engine governing ) Operating T emperature -40 to +70 ˚CStorage T emperature -40 to +85 ˚CBuild Up Voltage Relative Humidity Max. 95%6 Vac 25 Hz residual volts at power input terminal Vibration 3 Gs @ 100 - 2K HzSoft Start Ramp Time Dimensions4 seconds +/- 10% 171.0 (L) x 120.0 (W) x 50.0 (H) mmTypical System Response WeightLess than 20 milliseconds 820 g +/- 2%EMI SuppressionInternal electromagnetic interference filtering___________________________________________________________________________________________ 2ADVR-08SECTION 2 : OUTLINE / SIZE / INSTALLATION REFERENCEFlag Terminal (“Fast-On” terminal)Figure 1Outline Drawing___________________________________________________________________________________________ ADVR-08 3___________________________________________________________________________________________ 4ADVR-08SECTION 3 : DIP SWITCH PROGRAMMING & VR ADJUSTMENTSU/F LEDO/E LEDSet fully50 Hz System : 40 to 51 Hz (Lowest position)60 Hz System : 50 to 61 Hz (Lowest position)(See TRIM)This adjustment allows some control over the generator voltage dip when applying load.It is typically used to compensate for turbo lag, leaving the generator to operate below the UFRO knee point setting. The voltage droop ratio can be set using the DIP adjustment. The range is 10 to 3 V/Hz.HZ HZ___________________________________________________________________________________________ ADVR-085SECTION 4 : WIRING CONNECTIONSExciter fieldPMGS2-S3 N:1AS 2-S 3 N :1AS 1-S 2 N :5A C.T Stator windingsS2-S3 N:1AS1-S2 N:5A Exciter fieldS2-S3 N:1AS1-S2 N:5A C.TFigure 2 Single & Three Phase PMGFigure 3 Three Phase AuxiliaryWinding (Full Harmonic)Figure 4 Auxiliary & HarmonicFigure 5 Self-Excited (SHUNT)Exciter fieldFigure 6ADVR-08 & IVT-1260 / IVT-2460 Wiring Connection※Use only the replacement fuses specified in this user manual.※Appearance and specifications of products are subject to change for improvement without prior notice.___________________________________________________________________________________________ 6ADVR-08。

HAT2169H-EL-E中文资料

HAT2169H-EL-E中文资料HAT2169HSilicon N Channel Power MOS FETPower SwitchingREJ03G0119-0400Rev.4.00Sep 20, 2005FeaturesHigh speed switchingCapable of 4.5 V gate driveLow drive currentHigh density mountingLow on-resistanceR DS(on) = 2.8 m? typ. (at V GS = 10 V)OutlineAbsolute Maximum Ratings(Ta = 25°C)UnitRatingsItem SymbolDrain to source voltage V DSS 40 VGate to source voltage V GSS ±20 VDrain current I D 50 A Drain peak current I D(pulse)Note1 200 ABody-drain diode reverse drain current I DR 50 A Avalanche current I AP Note 2 30 A Avalanche energy E AR Note 2 72 mJ Channel dissipation Pch Note3 30 W Channel to Case Thermal Resistance θch-C 4.17 °C/WChannel te mperature Tch 150 °CStorage temperature Tstg –55 to +150 °CNotes: 1. PW ≤ 10 μs, duty cycle ≤ 1%2. Value at Tch = 25°C, Rg ≥ 50 ?3. Tc = 25°CElectrical Characteristics(Ta = 25°C)Item Symbol Min Typ Max Unit Test ConditionsDrain to source breakdown voltage V (BR)DSS 40 —— V I D = 10 mA, V GS = 0 Gate to source breakdown voltage V (BR)GSS ±20 ——V I G = ±100 μA, V DS = 0 Gate to source leak current I GSS ——±10 μA V GS = ±16 V, V DS = 0 Zero gate voltage drain current I DSS ——1 μA V DS = 40 V, V GS = 0 Gate to source cutoff voltage V GS(off) 1.0 — 2.5 V V DS = 10 V, I D = 1 mAR DS(on) — 2.8 3.5 m ? I D = 25 A, V GS = 10 V Note4 Static drain to source on stateresistance R DS(on) — 4.0 6.0 m ? I D = 25 A, V GS = 4.5 V Note4Forward transfer admittance |y fs | 39 65 — S I D = 25 A, V DS = 10 V Note4 Input capacitance Ciss — 6650 — pF Output capacitance Coss — 890 — pF Reverse transfer capacitance Crss — 360 — pF V DS = 10 V, V GS = 0, f = 1 MHz Gate Resistance Rg — 0.5 — ? Total gate charge Qg — 45 — nC Gate to source charge Qgs — 21 — nC Gate to drain charge Qgd — 10 — nC V DD = 10 V, V GS = 4.5 V, I D = 50 A Turn-on delay time t d(on) —15 — ns Rise time t r — 64 — nsTurn-off delay time t d(off) — 55 — ns Fall timet f — 9.5 — ns V GS = 10 V, I D = 25 A,V DD ? 10 V, R L = 0.4 ?, Rg = 4.7 ? Body–drain diode forward voltage V DF — 0.83 1.08 V IF = 50 A, V GS = 0 Note4 Body–drain diode reverse recovery timet rr — 40 — ns IF = 50 A, V GS = 0di F / dt = 100 A/ μsNotes: 4. Pulse testMain CharacteristicsPackage DimensionsOrdering InformationPart Name Quantity Shipping ContainerHAT2169H-EL-E 2500pcs TapingNote: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product. RENESAS SALES OFFICESRefer to "/en/network" for the latestand detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology Hong Kong Ltd.7th Floor, North T ower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001Renesas Technology Korea Co., Ltd.Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, KoreaTel: <82> 2-796-3115, Fax: <82> 2-796-2145Renesas Technology Malaysia Sdn. Bhd.Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor DarulEhsan, MalaysiaTel: <603> 7955-9390, Fax: <603> 7955-9510。

HAT2016R中文资料

Forward Transfer Admittance vs. Drain Current
20
10 Tc = –25 °C
5
75 °C
2
25 °C
1
0.5
0.2 0.2
V DS = 10 V Pulse Test
0.5 1 2
5 10 20
Drain Current I D (A)
Static Drain to Source on State Resistance R DS(on) (Ω)
Drain to Source Voltage V DS (V)
Dynamic Input Characteristics
50
20
I D = 6.5 A
40 V DD = 5 V
16
10 V
25 V
30 VDS
12 VGS
20
8
10
V DD = 25 V
4
10 V
5V
0
0
8
16 24 32 40
Gate Charge Qg (nc)
3.0
Channel Dissipation Pch (W)
2 Drive Operation
2.0
1.0
1 Drive Operation
0
50
100
150
200
Ambient Temperature Ta (°C)
Drain Current I D (A)
Maximum Safe Operation Area 100
HAT2016R
Silicon N Channel Power MOS FET High Speed Power Switching

Alpha Wire 产品说明书：1 X 1 HOOKUP 16 AWG TC 0.060 厚度 P

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207Tel: 1-800-52 ALPHA (25742), Web: Customer Specification PART NO. 3254ConstructionDiameters (In)1) Component 1 1 X 1 HOOKUP a) Conductor 16 (7/24) AWG TC0.060 b) Insulation0.010" Wall, Nom. PVC, Semi Rigid0.080+/- 0.002(1) PrintALPHA WIRE E163869-* RU AWM STYLE 1061 80C 300V VW-1 16 AWG --- LLXXXX CSA AWM I A/B 80C 300 VOLTS FT1 ROHS{0} * = Factory Code[Note: Product may have c(UL) or CSA markings depending upon plant of manufacture.] (2) Color(s)WHITE, BLACK, RED, GREEN, YELLOW, BLUE, BROWN ORANGE, SLATE, VIOLETApplicable Specifications1) ULAWM/STYLE 1061 80°C / 300 V RMSVW-12) CSA InternationalAWM I A/B 80°C / 300 V RMS FT1Environmental1) EU Directive 2011/65/EU(RoHS2):All materials used in the manufacture of this part are in compliance with European Directive 2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Consult Alpha Wire's web site for RoHS C of C.2) REACH Regulation (EC 1907/2006):This product does not contain Substances of Very High Concern (SVHC) listed on the European Union's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information,please see Alpha's REACH SVHC Declaration.3) California Proposition 65:The outer surface materials used in the manufacture of this part meet the requirements of California Proposition 65.PropertiesPhysical & Mechanical Properties1) Temperature Range-10 to 80°C2) Bend Radius 10X Cable Diameter3) Pull Tension 22.2 Lbs, MaximumElectrical Properties(For Engineering purposes only)1) Voltage Rating 300 V RMS2) Inductance0.03 µH/ft, Nominal3) Conductor DCR 3.9 Ω/1000ft @20°C, NominalOtherPackaging Flange x Traverse x Barrel (inches)a) 1000 FT 6.5 x 4 x 2.5 Continuous lengthb) 100 FT 3.5 x 3 x 1.125 Continuous length[Spool dimensions may vary slightly]Notes:a) Certain colors and put-up combinations may only be available by special order, minimums may apply.Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207Tel: 1-800-52 ALPHA (25742)Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not ensure product availability.Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever, even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.ALPHA WIRE - CONFIDENTIAL AND PROPRIETARYNotice to persons receiving this document and/or technical information. This document is confidential and is the exclusive property of ALPHA WIRE, and is merely on loan and subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges and agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no portion of this document may be copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In the case of conflicting contractual provisions, this notice shall govern the status of this document. ©2013 ALPHA WIRE - all rights reserved.EU/China ROHS CERTIFICATE OF COMPLIANCETo Whom It May Concern:Alpha Wire Part Number: 32543254 , RoHS-Compliant Commencing With 1/1/2005 ProductionNote: all colors and put-upsThis document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use of certain hazardous substances used in the manufacture of electrical and electronic equipment. This certification extends to amending Directive 2015/863/EU which expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The reader is referred to these Directives for the specific definitions and extents of the Directives. No Exemptions are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS “Marking for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2014. Substance Maximum Control ValueLead0.1% by weight (1000 ppm)Mercury0.1% by weight (1000 ppm)Cadmium0.01% by weight (100 ppm)Hexavalent Chromium0.1% by weight (1000 ppm )Polybrominated Biphenyls (PBB)0.1% by weight (1000 ppm)Polybrominated Diphenyl Ethers (PBDE) ,Including Deca-BDE0.1% by weight (1000 ppm)Bis(2-ethylhexyl) phthalate (DEHP)0.1% by weight (1000 ppm)Butyl benzyl phthalate (BBP)0.1% by weight (1000 ppm)Dibutyl phthalate (DBP) 0.1% by weight (1000 ppm)Diisobutyl phthalate (DIBP)0.1% by weight (1000 ppm)The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.Authorized Signatory for the Alpha Wire:Dave Watson, Director of Engineering & QA12/28/2017Alpha Wire711 Lidgerwood Ave.Elizabeth, NJ 07207Tel: 1-908-925-8000。

2016年吉普运ститу国际AE部件清单说明书

PARTS LIST WRANGLER 2016 AE, AB, DBITEM PART NO.DESCRIPTION QTY. 1012397081MOTOR HOUSING1 102912079010 X 5/8 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 10]4 1032397181WATER SOLENOID 24 VOLT1 2397721WATER SOLENOID 120 VOLT (USE ON AE MODELS)1 10491209101/4-20 HEX NUT WITH STAR LOCK WASHER [PACK OF 10]2 1052393001GEAR MOTOR, 3/4 HP, 24 VOLT DC1 2393011GEAR MOTOR, 3/4 HP, 120 VOLT AC (USE ON AE MODELS)1 10626905811/4 SPADE MALE TERMINAL 12-10 GAGE YELLOW2 10791225801/2-13 X 2 HEX BOLT [PACK OF 1]2 108912245017/32 I.D. X 1 1/6 O.D. X .074/.121 THICK SAE FLAT WASHER (1/2) [PK 5]2 1092397213DECK SKIRT1 1102391941BALL JOINT2 11191224201/2 SPLIT LOCK WASHER [PACK OF 5]2 11291227001/2-20 X 1 HEX BOLT [PACK OF 2]2 1132391702SKIRT BAND1 114912045010-24 X 1 ROUND HEAD PHILLIPS MACHINE SCREW [PACK OF 10]1 115912035010-24 HEX NUT WITH NY-LOK INSERT [PACK OF 10]1 1162391121BUMPER GUARD1 1172393052CLUTCH CASTING1 118912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PK 10]1 11991215205/16 SPLIT LOCK WASHER [PACK OF 10]1 12091216405/16-18 X 3/4 HEX BOLT [PACK OF 5]1 121-----------SEE ACCESSORIES PAGE FOR PADS AND BRUSHES122289260120” STRUCTURAL FOAM PAD DRIVER - INCLUDES:1 122A5990731SPRING CLIP PAD HOLDER SET (WHITE) - INCLUDES:1 122B9120506#8 X 5/8 PAN HEAD PHILLIPS SHEET METAL SCREW3 122A5297691PAD HOLDER BASE (YELLOW)1 4495481LOCK RING DEEP (YELLOW)1 1232393061SPACER1 12491222203/8-16 X 3/4 HEX BOLT [PACK OF 5]4 12591221003/8 SPLIT LOCK WASHER [PACK OF 10]4 126912198013/32 I.D. X 1 O.D. X .12 THICK FLAT WASHER (11 GAUGE ) [PACK OF 2]2 12791215605/16-18 X 1/2 HEX BOLT [PACK OF 5]1 12891214105/16 EXTERNAL STAR LOCK WASHER [PACK OF 10]1 1292392276AXLE, BUMPER WHEEL1 130********" BUMPER WHEEL1 131912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PK 10]1 132********/16 EXTERNAL STAR LOCK WASHER [PACK OF 10]1 133********/16-18 X 1/2 HEX BOLT [PACK OF 5]1 134********/4-20 X 3/4 HEX HEAD MACHINE SCREW [PACK OF 10]2 1352397741BRACKET, DRAIN HOSE CATCH1 136********/32 I.D. X 5/8 O.D. FLATWASHER - PACK OF 102BRUSH HEAD ASSEMBLYAE, AB FRAME ASSEMBLYITEM PART NO.DESCRIPTION QTY. 2017690551DRIVE CASTING SPACER1 20291222203/8-16 X 3/4 HEX BOLT [PACK OF 5]4 20391221003/8 SPLIT LOCK WASHER [PACK OF 10]4 20491220003/8-16 HEX NUT [PACK OF 10]4 2052397311AXLE1 2062398011FRAME1 2072391931WHEEL, 8" WITH GROOVES2 20891222203/8-16 X 3/4 HEX BOLT [PACK OF 5]2 20991221003/8 SPLIT LOCK WASHER [PACK OF 10]2 21091219807/16 I.D. X 1 O.D. X .075/.080 THICK SAE FLAT WASHER (3/8) [PACK OF 2]2 2116491871END COUPLING ROUND BEAD CHAIN1 212912051010-24 X 1/2 TRUSS HEAD PHILLIPS SCREW [PACK OF 10]1 2136491860ROUND BEAD CHAIN (CUT TO 6”) .5’214912036010-24 HEX NUT WITH STAR LOCK WASHER [PACK OF 10]1 2152398021CASTER MOUNT PLATE1 216912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK FLAT WASHER (5/16) [PACK OF 10]8 21791215205/16 SPLIT LOCK WASHER [PACK OF 10]8 21891216805/16-18 X 1 HEX BOLT [PACK OF 5]2 2192398031CASTER 3 1/2 WHEEL SWIVEL TOP - INCLUDES:2 2398211WHEEL, 3 1/2 PERFORMA RUBBER1 22091216405/16-18 X 3/4 HEX BOLT [PACK OF 5]6ITEM PART NO.DESCRIPTION QTY. 3012397111TRANSAXLE BRACKET2 30291222203/8-16 X 3/4 HEX BOLT [PACK OF 5]4 30391221003/8 SPLIT LOCK WASHER [PACK OF 10]4 30491220003/8-16 HEX NUT [PACK OF 10]4 3052398011FRAME1 306912051010-24 X 1/2 TRUSS HEAD PHILLIPS SCREW [PACK OF 10]1 307912036010-24 HEX NUT WITH STAR LOCK WASHER [PACK OF 10]1 3086491871END COUPLING ROUND BEAD CHAIN1 3096491860ROUND BEAD CHAIN (CUT TO 6”) .5’3102395501WHEEL - DRIVE, 8 X 22 31191219807/16 I.D. X 1 O.D. X .075/.080 THICK SAE FLAT WASHER (3/8) [PACK OF 2]2 31291221003/8 SPLIT LOCK WASHER [PACK OF 10]2 31391222203/8-16 X 3/4 HEX BOLT [PACK OF 5]2 3142397011TRANSAXLE1 315912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK FLAT WASHER (5/16) [PACK OF 10]8 31691215205/16 SPLIT LOCK WASHER [PACK OF 10]8 31791216805/16-18 X 1 HEX BOLT [PACK OF 5]2 3182398031CASTER 3 1/2 WHEEL SWIVEL TOP - INCLUDES2 2398211WHEEL, 3 1/2 PERFORMA RUBBER1 31991216405/16-18 X 3/4 HEX BOLT [PACK OF 5]6 3202398021CASTER MOUNT PLATE1ITEM PART NO.DESCRIPTION QTY. 4017691891CLOUD BURST DECAL - 3.5 X 202 4022690251FILTER FITTING HOSE BARB AND COLLAR1 40391225071/2-13 HEX NUT WITH NY-LOK INSERT [PACK OF 1]2 4042397303DECK LIFT1 4052398011FRAME1 4068791180VINYL HOSE 1/2 I.D. X 3/4 O.D. (3 1/25" LENGTH) .96’4072495161FITTING 1/4 NPT X 1/2 BARB STRAIGHT1 408912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PK 10]2 40991215205/16 SPLIT LOCK WASHER [PACK OF 10]4 41091215805/16-18 X 3/4 BUTTON HEAD CAP SCREW [PACK OF 5]4 4112397981VALVE LEVER LARGE PIVOT HOLE1 4122791281BUSHING SPACER1 41391209001/4-20 HEX NUT WITH NY-LOK INSERT [PACK OF 10]2 414239328190° ELBOW, 1/4 NPT X 1/4 NPT1 4153393551INLINE CANISTER STRAINER1 4162495151FITTING, ELL 1/2 BARB X 1/4 NPT - NYLON1 4178791180VINYL HOSE 1/2 I.D. X 3/4 O.D. (37” LENGTH) 2.75’4182397961MANUAL SOLUTION VALVE, STEEL STEM1 41923979712016 VALVE BRACKET1 4202391181GRIP, VALVE LEVER1 4212397191HANDLE SOLUTION VALVE1 42291225071/2-13 HEX NUT WITH NY-LOK INSERT [PACK OF 1]2 4232790751BUSHING SPACER2 424912245017/32 I.D. X 1 1/16 O.D. X .074/.121 THICK SAE FLAT WASHER (1/2) [PK 5]4 42591225501/2-13 X 2 HEX BOLT [PACK OF 1]2 4263390661TUBBING CONTROL VALVE1 4278791070VINYL HOSE, 3/8 I.D. X 1/2 O.D. (30” LENGTH) 2.5’4282397551FITTING 1/4 NPT X 3/8 BARB1 429239177190° HOSE BARB 3/4 I.D. X 1/2 NPT NYLON1 43091212101/4-20 X 5/8 HEX BOLT [PACK OF 10]4 43191208801/4 SPLIT LOCK WASHER [PACK OF 10]4 43291209309/32 I.D. X 5/8 O.D. X .051/.080 THICK WASHER (1/4) [PACK OF 10]4 4332397611HINGE BRACKET2 4342398191DECAL - MULTI COLOR KIT1 4352397541BAG RING1 4362397531SOLUTION INLET FILTER1 43791202058 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 3]2 4382397071SOLUTION TANK1 4393393991OBC WARNING DECAL1SOLUTION TANK TO FRAME ASSEMBLYITEM PART NO.DESCRIPTION QTY. 50191219603/8 EXTERNAL STAR LOCK WASHER [PACK OF 10]1 50291220303/8-16 X 3/4 BUTTON HEAD SOCKET SCREW [PACK OF 2]1 5032694261CABLE1 504239177190° HOSE BARB 3/4 I.D. X 1/2 NPT NYLON1 5052397291BRACKET DECK LIFT HANDLE1 50691213835/16-18 X 1 1/4 SET SCREW [PACK OF 1]1 50791214105/16 EXTERNAL STAR LOCK WASHER [PACK OF 10]3 5082397331DECK LIFT HANDLE GRIP1 5092397281HANDLE DECK LIFT1 51091216405/16-18 X 3/4 HEX BOLT [PACK OF 5]2 5112397303DECK LIFT1 51291222603/8-16 X 1 HEX BOLT [PACK OF 2]1 5138791030VINYL HOSE, 3/4" I.D. X 1" O.D. 1/8 THICK (38” LENGTH) 3.2’514912054010-24 X 1/2 FLAT HEAD PHILLIPS MACHINE SCREW [PACK OF 10]1 515912033010 EXTERNAL STAR LOCK WASHER [PACK OF 10]1 5162397271UNIVERSAL MOUNTING STRAP1 5172397421SOLUTION GAUGE1 51891221003/8 SPLIT LOCK WASHER [PACK OF 10]1 51991220303/8-16 X 3/4 BUTTON HEAD SOCKET SCREW [PACK OF 2]1 52091211601/4-20 X 3/8 HEX BOLT [PACK OF 10]1 52191208801/4 SPLIT LOCK WASHER [PACK OF 10]1 52291209309/32 I.D. X 5/8 O.D. X .051/.080 THICK SAE FLAT WASHER (1/4) [PK OF 10]1 52391214405/16-18 WING NUT [PACK OF 2]1 52491220103/8-24 HEX NUT [PACK OF 5]1 5252691811SHORT LIFT ROD, BRUSH1 5262691831HOUSING - SPRING, RETAINER1 5272691841SPRING, BRUSH PRESSURE1 52891221403/8-16 HEX NUT WITH NY-LOK INSERT [PACK OF 5]1 5292691821HOUSING - SPRING, BRUSH LIFT1 53091220003/8-16 HEX NUT [PACK OF 10]1 5312397581LIFT ROD 13”1 53291220103/8-24 HEX NUT [PACK OF 5]1 53344905313/8” ROD END2 5342397061RECOVERY TANK1 5352391963CAST IRON WEIGHT (USE ON AE MODELS)1 5369997550VELCRO HOOK (USE ON AE MODELS)1’5379997560VELCRO LOOP (USE ON AE MODELS)1’5382392761WARNING TAG - BATTERY TERMINAL1 5393390361BATTERY, WET, 6 VOLT, 225 AMP/HOUR.4 6393651BATTERY WET, 12 VOLT, 145 AMP/HOUR22392731BATTERY, GEL 12 VOLT 100 AMP/HOUR2 5406496031BATTERY BLOCK2 5412397071SOLUTION TANK1BRUSH LIFT ASSEMBLYITEM PART NO.DESCRIPTION QTY. 6012397671CLIP, TIE STRAP1 602912033010 EXTERNAL STAR LOCK WASHER [PACK OF 10]1 603912051010-24 X 1/2 TRUSS HEAD PHILLIPS MACHINE SCREW [PACK OF 10]1 604912300011" LONG WIRE TIE [PACK OF 5]1 6057691261EXHAUST MUFFLER TUBE1 606912300011" LONG WIRE TIE [PACK OF 5]1 6072397691VAC MOTOR HOSE EXHAUST - 18” LONG1 6084495441HOSE CLAMP - 1 9/16 TO 2 1/21 6094495441HOSE CLAMP - 1 9/16 TO 2 1/21 6102391671DRAIN HOSE - CRUSH PROOF1 6112791881PLUG STRAP1 6122391661HOSE TUBE PLATED1 6132393451HOSE CLAMP - 1 13/16 - STAINLESS2 6142795621DRAIN PLUG1 6152397031LOWER HINGE BRACKET2 6162397041HINGE PIN2 61791215705/16-18 X 1/2 BUTTON SOCKET HEAD CAP SCREW [PACK OF 5]5 61891214105/16 EXTERNAL STAR LOCK WASHER [PACK OF 10]5 6192397021UPPER HINGE BRACKET2 6205490161FULLY INSULATED FEMALE TERMINAL 14-16 GAGE2 6212395571MOTOR, VAC 24 VOLT - 3 STAGE1 2397571CARBON BRUSH REPLACEMENT - 24 VOLT22391071MOTOR, VAC 120 VOLT - 2 STAGE (USE ON AE MODELS)12392581CARBON BRUSH REPLACEMENT - 120 VOLT2 62291209001/4-20 HEX NUT WITH NY-LOK INSERT [PACK OF 10]3 62391209309/32 I.D. X 5/8 O.D. X .051/.080 THICK SAE FLAT WASHER (1/4) [PK 10]3 6244690101VAC MOTOR / FLOAT GASKET1 62591213631/4-20 X 4 1/2 FULL THREADED STUD [PACK OF 2]3 6262690591SQUEEGEE VAC HOSE WITH CUFFS1 6274892671HOSE CLAMP - 1 1/16 TO 21 6282391541FLOAT SCREEN ASSEMBLY1 6298891100GASKET MATERIAL 1/2" X 1" (26” LENGTH) 2.2’6304894461RUBBER STOP (USED ON AB, DB MODELS)1 63191210101/4-20 X 3/4 TRUSS HEAD PHILLIPS MACHINE SCREW [PACK OF 5]1 6322397591VAC FILTER1 6332397441VAC PLATE GASKET1 6342393511IDENTIFIER DECAL - WRANGLER 2016 DB1 2393521IDENTIFIER DECAL - WRANGLER 2016 AB12393531IDENTIFIER DECAL - WRANGLER 2016 AE1 6352397411VAC PLATE1 6365392401WARNING - FIRE DECAL1 637912033010 EXTERNAL STAR LOCK WASHER [PACK OF 10]7 638912051010-24 X 1/2 TRUSS HEAD PHILLIPS MACHINE SCREW [PACK OF 10]7 6392690889RECOVERY TANK LID AND GASKET ASSEMBLY - INCLUDES:1 639A2690881RECOVERY TANK LID ASSEMBLY - INCLUDES:1 639A12690921BLACK RING, RECOVERY TANK1 639A291202058 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 3]1 639A32690931LID CHAIN1 639A42690911LID - CLEAR1 639B2690891RECOVER TANK LID GASKET1 64091202058 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 3]5 641912045010-24 X 1 ROUND HEAD PHILLIPS MACHINE SCREW [PACK OF 10]1 642912036010-24 HEX NUT WITH STAR LOCK WASHER [PACK OF 10]1 6432397061RECOVERY TANK1RECOVERY TANK ASSEMBLY11ITEM PART NO.DESCRIPTION QTY. 7012397771PLUG, 2” HOLE1 70291202058 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 3]8 7032397321DASH PLATE - LEFT1 70491214305/16-18 HEX NUT WITH NY-LOK INSERT [PACK OF 5]2 7052397731WIRE DIAGRAM DECAL - ELECTRIC 120 VOLT1 7062397783REAR PANEL1 70791214305/16-18 THIN HEX NUT WITH NY-LOK INSERT [PACK OF 5]1 708912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PACK OF 10]2 7092397141SQUEEGEE LIFT HANDLE BRACKET1 71091216405/16-18 X 3/4 HEX BOLT [PACK OF 5]1 71191219905/16-18 HEX JAM NUT [PACK OF 10]1 7122397131SQUEEGEE LIFT HANDLE1 7132397601GRIP, SQUEEGEE LIFT HANDLE1 71491212101/4-20 X 5/8 HEX BOLT [PACK OF 10]1 71591208801/4 SPLIT LOCK WASHER [PACK OF 10]1 7164490561INSULATED STANDOFF1 717912069010-32 HEX NUT WITH STAR LOCK WASHER [PACK OF 10]1 7185492741RECTIFIER1 71991214305/16-18 HEX NUT WITH NY-LOK INSERT [PACK OF 5]2 7202397611HINGE BRACKET2 72191216005/16-18 X 5/8 HEX BOLT [PACK OF 5]2 722499066175’ POWER CORD, 12-3 WITH TWIST LOCK1 5592081FEMALE TWIST LOCK [REPLACEMENT PART]1 72391209309/32 I.D. X 5/8 O.D. X .051/.080 THICK SAE FLAT WASHER (1/4) [PACK OF 10]1 72491209701/4 EXTERNAL STAR LOCK WASHER [PACK OF 10]1 725912043010-24 X 3/4 ROUND HEAD PHILLIPS MACHINE SCREW [PACK OF 10]1 72691211701/4-20 X 1/2 HEX BOLT [PACK OF 10]1 7272495301SQUEEGEE LIFT CABLE1 72891202058 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 3]4 72991203707/32 I.D. X 1/2 O.D. X .032/.065 THICK SAE FLAT WASHER (#10) [PACK OF 10]4 7302397381HANDLE NET1 73191209101/4-20 HEX NUT WITH STAR LOCK WASHER [PACK OF 10]2 73291209309/32 I.D. X 5/8 O.D. X .051/.080 THICK SAE FLAT WASHER (1/4) [PACK OF 10]2 7332398191DECAL - MULTI COLOR KIT1 734912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PACK OF 10]2 73591215205/16 SPLIT LOCK WASHER [PACK OF 10]2 73691217205/16-18 X 1 1/4 FULL THREADED HEX HEAD BOLT [PACK OF 2]2 7372391461PIVOT SPACER2 7382397651BRACKET, DECK HEIGHT1 73991214705/16-18 X 1 FLAT HEAD PHILLIPS MACHINE SCREW [PACK OF 5]2 74091213705/16-18 X 3 1/4 HEX BOLT [PACK OF 2]1 74191218855/16-18 X 1 SOCKET HEAD CAP SCREW [PACK OF 2]2 742912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PACK OF 10]3 7435091661CORD CLAMP1 7442397711STUB CORD WITH MALE TWIST LOCK - 120V1 7455091671STRAIN RELIEF - METAL1 7465390261STRAIN RELIEF NUT1 7472397091HANDLE, AB AND AE MODELS1 7483392901HANDLE GRIP2 7492397481DASH PLATE RIGHT AE MODELS1 7500693141RUBBER SWITCH BOOT2 75106918511/2 INTERNAL STAR LOCK WASHER2 7522792041SWITCH, TOGGLE [VAC & BRUSH]2 7532392201CIRCUIT BREAKER - 120 VOLT2 7542397371HANDLE SPACER1 7555092511BUTTON - PLUG1 7563393591STRAINER LOCATION LABEL112AE HANDLE ASSEMBLY13ITEM PART NO.DESCRIPTION QTY. 8012397371HANDLE SPACER1 8022397091HANDLE, AB AND AE1 2397171HANDLE, DB1 8032398131WIRE DECAL AB (12V 145AH BATTERIES)1 2398141WIRE DECAL AB (6V 225AH BATTERIES)12398151WIRE DECAL DB1 804912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PACK OF 10]2 80591215205/16 SPLIT LOCK WASHER [PACK OF 10]2 80691217205/16-18 X 1 1/4 FULL THREADED HEX HEAD BOLT [PACK OF 2]2 80791209309/32 I.D. X 5/8 O.D. X .051/.080 THICK SAE FLAT WASHER (1/4) [PACK OF 10]2 80891209101/4-20 HEX NUT WITH STAR LOCK WASHER [PACK OF 10]2 8094894071CORD CLAMP (USED HERE ON AB MODELS WITH 1392191 CHARGER ONLY)1 810912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PACK OF 10]1 81191214305/16-18 THIN HEX NUT WITH NY-LOK INSERT [PACK OF 5]1 8122694031STAND OFF, SPEED CONTROL COVER (USED ON DB ONLY)2 8132694021COVER, SPEED CONTROL (USED ON DB ONLY)1 81491200206-32 HEX NUT WITH STAR LOCK WASHER [PACK OF 10] (USED ON DB ONLY)2 8152490821SPEED CONTROL (USED ON DB ONLY)1 81691209101/4-20 HEX NUT WITH STAR LOCK WASHER [PACK OF 10]4 81791209309/32 I.D. X 5/8 O.D. X .051/.080 THICK SAE FLAT WASHER (1/4) [PACK OF 10]4 8182792241SILICON RECTIFIER (USED ON DB ONLY)2 8192391351CONTACTOR, 24 VOLT2 82091212101/4-20 X 5/8 HEX BOLT [PACK OF 10]1 82191208801/4 SPLIT LOCK WASHER [PACK OF 10]1 8224490561INSULATED STANDOFF1 82391214305/16-18 HEX NUT WITH NY-LOK INSERT [PACK OF 5]2 8242397611HINGE BRACKET2 82591216005/16-18 X 5/8 HEX BOLT [PACK OF 5]2 82691209701/4 EXTERNAL STAR LOCK WASHER [PACK OF 10]1 82791211701/4-20 X 1/2 HEX BOLT [PACK OF 10]1 82891212101/4-20 X 5/8 HEX BOLT [PACK OF 10]4 8292495301Y SQUEEGEE LIFT CABLE 25”/63.5 cm1 8302397601GRIP, SQUEEGEE LIFT HANDLE1 8312397131SQUEEGEE LIFT HANDLE1 83291219903/8-16 HEX JAM NUT [PACK OF 10]1 83391216405/16-18 X 3/4 HEX BOLT [PACK OF 5]1 8342397141SQUEEGEE LIFT HANDLE BRACKET1 835912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PACK OF 10]1 83691214305/16-18 HEX NUT WITH NY-LOK INSERT [PACK OF 5]2 8372397783REAR PANEL1 83891202058 X 1/2 PAN HEAD SHEET METAL SCREW - PACK OF 31 83991203707/32 I.D. X 1/2 O.D. X .032/.065 THICK FLAT WASHER1 840912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PACK OF 10]1 84191213705/16-18 X 3 1/4 HEX BOLT [PACK OF 2]1 84291218855/16-18 X 1 SOCKET HEAD CAP SCREW [PACK OF 2]2 843912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PACK OF 10]2 8442397651BRACKET, DECK HEIGHT1 84591214705/16-18 X 1 FLAT HEAD PHILLIPS MACHINE SCREW [PACK OF 5]2 8462391461BUSHING - LIFT LEVER214AB, DB REAR PANEL ASSEMBLY15ITEM PART NO.DESCRIPTION QTY. 9014890781PUSH BUTTON SWITCH BOOT1 9022690691MASTER SWITCH WITH RED CAP1 9030693141RUBBER SWITCH BOOT2 90406918511/2 INTERNAL STAR LOCK WASHER2 90591202058 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 3]8 9062391391BATTERY METER WITH HARDWARE1 9072391361CIRCUIT BREAKER 24 VOLT 30 AMP1 9082490891CIRCUIT BREAKER 15 AMP (USED ON DB ONLY)1 9092397521CIRCUIT BREAKER 25 AMP WITH SCREW TERMINALS1 9104491101TOGGLE S WITCH1 9112397321DASH PLATE - LEFT1 9122792041SWITCH, TOGGLE VAC1 9132397341DASH PLATE - RIGHT WITH MASTER SWITCH CUT OUT1 9143392901HANDLE GRIP2 91591219807/16 I.D. X 1 O.D. X .075/.080 THICK SAE FLAT WASHER (3/8)2 9162397091HANDLE, AB AND AE1 2397171HANDLE, DB1 9172398191DECAL KIT1 9184990321FUSE HOLDER WITH NUT AND WASHER1 91964957413AG FAST-ACTING FUSE 4 AMP1 92091209309/32 I.D. X 5/8 O.D. X .051/.080 THICK FLAT WASHER (1/4) [PACK OF 10]4 92191208801/4 SPLIT LOCK WASHER [PACK OF 10]4 92291212101/4-20 X 5/8 HEX BOLT4 9232398053OBC MOUNT1 9244890851CABLE CLAMP #COV-090 KMC1 9252491283CORD WRAP -OBC1 9269120085M3.5 X 19 PAN HEAD PHILLIPS SHEET METAL SCREW2 92791212101/4-20 X 5/8 HEX BOLT [PACK OF 10]2 92891208801/4 SPLIT LOCK WASHER [PACK OF 10]2 9293291111CORD CLAMP1 9302491271ONBOARD CHARGER 24 VOLT 25 AMP - INCLUDES:1 930A2491311REPLACEMENT AC CORD AND PANEL ASSEMBLY1 93123981715/16 RING 22-18 GAGE NYLON INSULATION1 93223981811/4 RING 16-14 GAGE NYLON INSULATION1 93391211701/4-20 X 1/2 HEX BOLT [PACK OF 10]2 93491208801/4 SPLIT LOCK WASHER [PACK OF 10]2 93591209309/32 I.D. X 5/8 O.D. X .051/.080 THICK FLAT WASHER (1/4) [PACK OF 10]2 9361390773DRAIN HOSE BRACKET2 93791208801/4 SPLIT LOCK WASHER [PACK OF 10]4 93891212101/4-20 X 5/8 HEX BOLT [PACK OF 10]4 9391392191120 VOLT ONBOARD CHARGER 24 VOLT 12 AMP - INCLUDES:1 94091208801/4 SPLIT LOCK WASHER [PACK OF 10]1 94191212101/4-20 X 5/8 HEX BOLT [PACK OF 10]1 9423291111CORD CLAMP1 943912032010 SPLIT LOCK WASHER [PACK OF 10]4 944912051010-24 X 1/2 TRUSS HEAD PHILLIPS MACHINE SCREW4 9456495701120 VOLT ONBOARD CHARGER CORD1 6495711240VOLT ONBOARD CHARGER CORD1 9462398259KEY SWITCH / HOUR METER KIT (OPTIONAL)1 946A2795711KEY SWITCH & KEY1 946A12796131REPLACEMENT KEY1 6495571WIRE ASSEMBLY - KEY SWITCH ADAPTOR (NOT SHOWN)1 946B2397351DASH PLATE - RIGHT, OPTIONAL KEY SWITCH AND HOUR METER1 946C2397361HOUR METER1 2398121HOUR METER LEADS 35” (NOT SHOWN)1 9473393591STRAINER LOCATION LABEL116AB, DB HANDLE ASSEMBLY1718DB TWIST GRIP ASSEMBLYITEM PART NO.DESCRIPTIONQTY.10012397171HANDLE, WHEEL DRIVE110022397453COVER - WHEEL DRIVE HANDLE1100391202058 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 3]210042691931DRIVE GEAR, HANDLE BAR - INCLUDES:11004A 91201708-32 X 3/16 SET SCREW - KNURL POINT STEEL [PACK OF 5]210059122496RETAINING RING310063393841WASHER, AN 1/2 X .053-.073110076496091SPRING TORSION .81 I.D. X .067 WIRE110086496081BEARING PLAIN SLEEVE .5 X .75 X .75 LONG 110092398061HANDLE BAR 2016110107690691NYLINER2101191219807/16 I.D. X 1 O.D. X .075/.080 THICK SAE FLAT WASHER (3/8) [PK 2]210123392901HANDLE GRIP210132397261HANDLE GRIP BASE210142398071TWIST GRIP BRACKET, LEFT SIDE1101591209101/4-20 HEX NUT WITH STAR LOCK WASHER [PACK OF 10]1101691211701/4-20 X 1/2 HEX BOLT [PACK OF 10]110172694131POTENTIOMETER110182397231TWIST GRIP BRACKET , RIGHT SIDE110192691941DRIVEN GEAR, POTENTIOMETER - INCLUDES:11019A 91201708-32 X 3/16 SET SCREW - KNURL POINT STEEL [PACK OF 5]210209123210.891 I.D. X 1.5 O.D. X .125 THICK FLAT WASHER [PACK OF 1]2102191208501/4-20 X 5/16 SET SCREW - KNURL POINT [PACK OF 2]210222397221RETAINING RING, 7/8" SHAFT219STRAIGHT SQUEEGEE ASSEMBLYITEM PART NO.DESCRIPTION QTY.11012398041SPACER 1/2 I.D. X 1.188111022391941BALL JOINT 111032391461BUSHING, LIFT LEVER 1110491226571/2-13 X 3 LOCKING HEX BOLT [PACK OF 1]1110513911713/8 FLANGE NYLINER 211063695581HEIGHT ADJUSTING SPRING 1110791223403/8-16 X 2 HEX BOLT [PACK OF 2]1110891210101/4-20 X 3/4 TRUSS HEAD PHILLIPS MACHINE SCREW [PACK OF 5]2110991209001/4-20 HEX NUT WITH NY-LOK INSERT [PACK OF 10]2111091215205/16 SPLIT LOCK WASHER [PACK OF 10]1111191218405/16-18 X 2 1/4 FULL THREADED HEX BOLT [PACK OF 1]111122692539STRAIGHT SQUEEGEE ASSEMBLY - INCLUDES:11112A 91217605/16-18 X 1 3/4 HEX BOLT [PACK OF 2]21112B 3096741WHEEL, BUMPER - SMALL GREY 21112C 279106132" REPLACEMENT SQUEEGEE BLADES 21112D 91218805/16-18 X 3/4 SOCKET HEAD CAP SCREW [PACK OF 2]21112E 91219205/16-18 X 1 1/2 SOCKET HEAD CAP SCREW [PACK OF 2]21112F 2692533INNER CHANNEL 11112G 91214505/16-18 HEX NUT WITH NY-LOK INSERT [PACK OF 5]21112H 2692523HOUSING - NARROW MOUNT SQUEEGEE 11112I 27902813" BUMPER WHEEL 21112J 912139011/32 I.D.X11/16 O.D.X.051/.080 THICK SAE FLAT WASHER (5/16) [PACK OF 10]21112K 91214105/16 EXTERNAL STAR LOCK WASHER [PACK OF 10]21112L 91215605/16-18 X 1/2 HEX BOLT [PACK OF 5]21112M 3392971T-KNOB - SQUEEGEE 211132397151SQUEEGEE MOUNT BRACKET 1111491221403/8-16 HEX NUT WITH NY-LOK INSERT [PACK OF 5]111152495301Y SQUEEGEE LIFT CABLE 25”/63.5 cm 1111691214455/16-18 WING NUT WITH NY-LOK [PACK OF 2]111172397161SQUEEGEE PIVOT ROD 1111891226701/2-20 HEX JAM NUT [PACK OF 5]1111991225071/2-13 HEX NUT WITH NY-LOK INSERT [PACK OF 1]120CURVED SQUEEGEE ASSEMBLYITEM PART NO.DESCRIPTIONQTY.2492499CURVED SQUEEGEE COMPLETE - INCLUDES:112012492551REAR SECURING STRAP1120291217205/16-18 X 1 1/4 FULL THREADED HEX HEAD BOLT [PACK OF 2]212032492561HOOKED END 212042492531REAR BLADE 112052492511CENTER WEDGE 212062492521FRONT BLADE1120791212101/4-20 X 5/8 HEX BOLT [PACK OF 10]4120891208801/4 SPLIT LOCK WASHER [PACK OF 10]4120991215605/16-18 X 1/2 HEX BOLT [PACK OF 5]2121091214105/16 EXTERNAL STAR LOCK WASHER [PACK OF 10]21211912139011/32 ID X 11/16 OD X .051/.080 THICK SAE FLAT WASHER (5/16) [PK 10]212122790281BUMPER WHEEL 212132492503MAIN HOUSING1121491215205/16 SPLIT LOCK WASHER [PACK OF 10]2121591217205/16-18 X 1 1/4 FULL THREADED HEX HEAD BOLT [PACK OF 2]2121691209309/32 I.D. X 5/8 O.D. X .051/.080 THICK SAE FLAT WASHER (1/4) [PACK OF 10]4121791200706-32 X 3/8 ROUND HEAD PHILLIPS MACHINE SCREW [PACK OF 10]212189120030 6 SPLIT LOCK WASHER [PACK OF 10]212192492581SQUEEGEE LEVEL 112203392971T-KNOB SQUEEGEE2122191214505/16-18 HEX NUT WITH NY-LOK INSERT [PACK OF 5]212222492571DOLLY WHEEL MOUNTING BRACKET21223912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PK 10]212243096741ROLLER WHEEL21225912139011/32 I.D. X 11/16 O.D. X .051/.080 THICK SAE FLAT WASHER (5/16) [PK 10]2122691217605/16-18 X 1 3/4 HEX BOLT [PACK OF 2]2122791212801/4-20 X 1 1/2 HEX BOLT [PACK OF 5]2122891208801/4 SPLIT LOCK WASHER [PACK OF 10]2122991209309/32 I.D. X 5/8 O.D. X .051/.080 THICK SAE FLAT WASHER (1/4) [PACK OF 10]212302492541CENTER HOLD DOWN112312492591CENTER HOLD DOWN SPACER221AE WIRING DIAGRAMITEM PART NO.DESCRIPTIONQTY.2397701WIRE HARNESS, ELECTRIC 112397711STUB CORD WIRE HARNESS 12792041TOGGLE S WITCH 22393011BRUSH MOTOR12397721SOLUTION SOLENOID VALVE 120 VOLT 14490561INSULATED STANDOFF 15492741RECTIFIER12392201CIRCUIT BREAKER 22391071VAC MOTOR15490161FULLY INSULATED FEMALE SPADE TERMINAL 14-16 GAGE2ITEM PART NO.DESCRIPTION QTY. 12398081MAIN WIRE HARNESS (OBC)1 42396141WIRE ASSEMBLY, TO POSITIVE/NEGATIVE BATTERY1 52398091DB WIRE HARNESS (OBC)1 62398161WIRE 18GA GREEN 20” 1/4F,#10R1 92391981BATTERY JUMPER 3/8 RING3 2391351CONTACTOR, 24 VOLT22391361CIRCUIT BREAKER, 24 VOLT, 30 AMP12391391BATTERY METER - WITH HARDWARE12392091CHARGER PLUG ONLY, RED 24 VOLT12393001GEAR MOTOR, IMPERIAL, 3/4 HP 24V DC12395571MOTOR, VAC 24 VOLT 3 STAGE12397181WATER SOLENOID 24 VOLT12397521CIRCUIT BREAKER, 25 AMP, SCREW TERMINALS12398259KEY SWITCH / HOUR METER KIT (OPTIONAL)12795711KEY SWITCH & KEY12796131REPLACEMENT KEY1 86495571WIRE ASSEMBLY - KEY SWITCH ADAPTOR1 2397351DASH PLATE - RIGHT, OPTIONAL KEY SWITCH AND HOUR METER12397361HOUR METER1 72398121HOUR METER LEADS 35”1 2490821SPEED CONTROL, CURTIS12490891CIRCUIT BREAKER, 15 AMP12397011TRANSAXLE 18”12491271ONBOARD CHARGER 24 VOLT 25 AMP12690691MASTER SWITCH WITH RED CAP126905811/4 SPADE MALE TERMINAL 10-12 YELLOW22694131POTENTIOMETER, CURTIS SPEED CONTROL12792041TOGGLE SWITCH, VAC12792241SILICON RECTIFIER24490561INSULATED STANDOFF14491101TOGGLE SWITCH, MOTOR14990321FUSE HOLDER WITH NUT AND WASHER15490161FULLY INSULATED FEMALE SPADE TERMINAL 14-16 GAGE26495701120 VOLT ONBOARD CHARGER CORD16495711240 VOLT ONBOARD CHARGER CORD164957413AG FAST-ACTING FUSE 4 AMP122DB WIRING DIAGRAM2324AB WIRING DIAGRAM 4 X 6VOLT 225AH BATTERIESITEM PART NO.DESCRIPTIONQTY.12398081MAIN WIRE HARNESS (OBC)122398111WIRE 18 GAGE, BLACK 30” 1/4 RING, 1/4 FEMALE SPADE 132398101WIRE 18 GAGE RED, 4.5”, 5/16 RING , #10 SNAP RING 142396141WIRE ASSEMBLY, TO POSITIVE/NEGATIVE BATTERY 162398161WIRE 18 GAGE, GREEN 20” 1/4 FLAG, #10 SNAP RING 192391981BATTERY JUMPER 3/8 RING 32391351CONTACTOR, 24 VOLT12391361CIRCUIT BREAKER, 24 VOLT, 30 AMP 12391391BATTERY METER - WITH HARDWARE 12392091CHARGER PLUG ONLY , RED 24 VOLT 12393001GEAR MOTOR, IMPERIAL, 3/4 HP 24V DC 12395571MOTOR, VAC 24 VOLT 3 STAGE 12397181WATER SOLENOID 24 VOLT12397521CIRCUIT BREAKER, 25 AMP , SCREW TERMINALS 12398259KEY SWITCH / HOUR METER KIT (OPTIONAL)12491271ONBOARD CHARGER 24 VOLT 25 AMP 12690691MASTER SWITCH12792041TOGGLE SWITCH, VAC 14490561INSULATED STANDOFF 14491101TOGGLE S WITCH, MOTOR14990321FUSE HOLDER WITH NUT AND WASHER 16495701120 VOLT ONBOARD CHARGER CORD 16495711240 VOLT ONBOARD CHARGER CORD 164957413AG FAST-ACTING FUSE 4 AMP125AB WIRING DIAGRAM 2 X 12VOLT 145AH BATTERIESITEM PART NO.DESCRIPTIONQTY.12398081MAIN WIRE HARNESS (OBC)122398111WIRE 18 GAGE, BLACK 30” 1/4 RING, 1/4 FEMALE SPADE 132398101WIRE 18 GAGE RED, 4.5”, 5/16 RING , #10 SNAP RING 142396141WIRE ASSEMBLY , TO POSITIVE/NEGATIVE BATTERY 192391981BATTERY JUMPER 3/8 RING31392191120 VOLT ONBOARD CHARGER 24 VOLT 12 AMP 12391351CONTACTOR, 24 VOLT12391361CIRCUIT BREAKER, 24 VOLT, 30 AMP 12391391BATTERY METER - WITH HARDWARE 12392091CHARGER PLUG ONLY , RED 24 VOLT 12393001GEAR MOTOR, IMPERIAL, 3/4 HP 24V DC 12395571MOTOR, VAC 24 VOLT 3 STAGE 12397181WATER SOLENOID 24 VOLT12397521CIRCUIT BREAKER, 25 AMP , SCREW TERMINALS 123981715/16 RING 22-18 GAGE NYLON INSULATION 123981811/4 RING 16-14 GAGE NYLON INSULATION 12398259KEY SWITCH / HOUR METER KIT (OPTIONAL)12690691MASTER SWITCH WITH RED CAP 12792041TOGGLE SWITCH, VAC 14490561INSULATED STANDOFF 14491101TOGGLE S WITCH, MOTOR14990321FUSE HOLDER WITH NUT AND WASHER 16495701120 VOLT ONBOARD CHARGER CORD 16495711240 VOLT ONBOARD CHARGER CORD 164957413AG FAST-ACTING FUSE 4 AMP1ITEM PART NO.DESCRIPTION QTY.2393001COMPLETE MOTOR ASSEMBLY1 130********NEGATIVE LEAD1 130233912011/4-20 X 7 3/4 THRU BOLT2 1303912060010-24 X 1/2 PAN HEAD THREAD CUTTING SCREW [PACK OF 10]2 130********ARMATURE ASSEMBLY - INCLUDES:1 1304A5092041TOP END BEARING1 1304B3391191ARMATURE VENT FAN1 1304C3391131BOTTOM END BEARING1 130********STATOR FRAME ASSEMBLY WITH MAGNETS1 130********GEAR BOX ASSEMBLY - INCLUDES:1 1306A3391101GEAR BOX - HOUSING ONLY1 1306B3391171SNAP RING1 1306C3391161OIL SEAL, SMALL1 1306D3391151END CAP1 1306E3391141“O” RING1 1306F3391131BOTTOM BEARING, LARGE1 1306G3391121GEAR SHAFT - INCLUDES:1 1306G12792681 1/4 X 1/4 X 1 MOTOR KEY1 1306H3391111TOP BEARING, SMALL1 130********OIL SEAL, LARGE1 130********HELICAL WASHER 1 13/32 X 1 7/8 - 2 WAVE SPRING WASHER1 1309————10-32 X 1/2 PAN HEAD SLOTTED SCREW, BRASS4 131********TOP END BRACKET ASSEMBLY - INCLUDES:1 1310A3391001TOP END BRACKET ONLY1 1310B3391021BRUSH BOARD ASSEMBLY - INCLUDES:1 1310B12797571 CARBON BRUSH SPRING4 1310B23391081 CARBON BRUSH4 131********STRAIN RELIEF2 131********POSITIVE LEAD1 2016 ELECTRIC 120V LISTED BELOW [2307100]2393011COMPLETE MOTOR ASSEMBLY 120 VOLT1 130********NEGATIVE LEAD1 130233912011/4-20 X 7 3/4 THRU BOLT2 1303912060010-24 X 1/2 PAN HEAD THREAD CUTTING SCREW [PACK OF 10]2 130********ARMATURE ASSEMBLY - INCLUDES:1 1304A5092041TOP END BEARING1 1304B3391191ARMATURE VENT FAN1 1304C3391131BOTTOM END BEARING1 130********STATOR FRAME ASSEMBLY WITH MAGNETS1 130********GEAR BOX ASSEMBLY - INCLUDES:1 1306A3391101GEAR BOX - HOUSING ONLY1 1306B3391171SNAP RING1 1306C3391161OIL SEAL, SMALL1 1306D3391151END CAP1 1306E3391141“O” RING1 1306F3391131BOTTOM BEARING, LARGE1 1306G3391121GEAR SHAFT - INCLUDES:1 1306G12792681 1/4 X 1/4 X 1 MOTOR KEY1 1306H3391111TOP BEARING, SMALL1 130********OIL SEAL, LARGE1 130********HELICAL WASHER 1 13/32 X 1 7/8 - 2 WAVE SPRING WASHER1 1309————10-32 X 1/2 PAN HEAD SLOTTED SCREW, BRASS4 131********TOP END BRACKET ASSEMBLY - INCLUDES:1 1310A3391001TOP END BRACKET ONLY1 1310B2393171BRUSH BOARD ASSEMBLY - INCLUDES:1 1310B12797571 CARBON BRUSH SPRING4 1310B22393241 CARBON BRUSH4 131********STRAIN RELIEF2 131********POSITIVE LEAD126。

长城9hat工作原理

长城9hat工作原理
长城9Hat是一款基于ARM Cortex-M3内核的嵌入式单片机，主要应用于物联网、智能家居、电子门锁等领域。

其工作原理是通过控制器中的CPU和外设来实现各种功能。

长城9Hat的CPU采用Cortex-M3内核，主频为72MHz，具有高效的运算能力。

它还配备了多种外设，如16位定时器、SPI、I2C、USART等，可用于数据采集、通信、控制等场景。

在长城9Hat的工作过程中，CPU扮演着重要的角色。

它通过读取存储器中的指令，控制外设的操作，实现各种功能。

CPU还能够进行中断处理，及时响应外部事件，提高系统的实时性。

除了CPU，长城9Hat还具有多种外设，它们的工作原理也各不相同。

比如16位定时器可以产生定时中断，用于计时、延时等场景；SPI接口可以实现与外部设备的通信，如传感器、存储器等；I2C接口也可以用于通信，但相比SPI更适合短距离、多设备的场景。

长城9Hat还支持多种编程方式，例如C语言、汇编语言等。

程序员可以根据具体需求和自己的编程习惯选择不同的编程方式，实现更加灵活多样的功能。

在实际应用中，长城9Hat可以用于物联网设备的开发，如智能家居、智能门锁、智能灯具等。

它也可用于嵌入式系统的开发，如电
子秤、电子血压计、工业控制等。

长城9Hat的高性能、低功耗、丰富的外设和编程灵活性，使其在嵌入式领域有着广泛的应用前景。

长城9Hat的工作原理是通过CPU和外设的协作来实现各种功能，它的灵活性和可扩展性使其在嵌入式领域有着广泛的应用前景。

2016 EATON Arrow Hart 产品指南说明书

SECTIONLS E C T I O NWeatherproof Covers and BoxesWaterproof product families L-2 NEC compliance L-3 Weatherproof receptacle covers L-4 Deluxe weatherproof covers for FS/FD boxes L-4 Standard weatherproof covers for FS/FD boxes L-4 Weatherproof covers for 30A, 50A & 60Astraight blade receptaclesL-5 Weatherproof covers for 50A locking devices in FS/FD boxes L-5 Weatherproof covers for power-lock devices in FS/FD boxes L-5 Weatherproof nylon covers for 15A, 20A & 30A devices L-6 Weatherproof while-in-use covers L-6 Metal weatherbox L-6 Original weatherbox 1-Gang L-7 Original weatherbox 2-Gang L-7Non-metallic weather protective covers L-8 Weatherproof receptacle covers L-8 Weatherproof switch covers L-8 Protective receptacle covers L-8Metal weatherproof covers L-9 Weatherproof covers with devices L-10 1-Gang weatherproof boxes L-11 Cast aluminum FS boxes L-11 Non-metallic FS box L-11Harsh environment receptacles L-12 Weather protective boots L-13 Plug and connector weather protective boots L-13 50A pro grip plug & connector weather protective boots L-13T able of contentsDeluxe weatherproof coversCorrosion resistant diecastaluminum, self-closing designprovides superior protection in wetand damp locations. Meets 2014NEC®406.9 (A) and 406.9 (B)(2).Watertight receptaclesRugged design for while-in-useapplications per 2014 NEC®406.9 (B). Must be used withwatertight plugs. Also meets“extra-duty” requirements.Non-metallic weatherproofcoversUL Listed for wet locations withcover closed these rugged coversresist high impact and sunlight.Meets 2014 NEC® 406.9 (A) and406.9 (B)(2).Weather protective bootsProvide protection from the elementsfor plugs & connector bodies rangingfrom 15 to 50A.Metal weatherboxwhile-in-use coversDiecast aluminum construction withNEMA Type 3R rating, meets 2014NEC® 406.9 (B)(1), and protectselectrical connections while-in-use.Weatherproof switch coverProvides protection for switchingin wet or damp locations. M eets2014 NEC®404.4.Weatherproof nylon coversUL Listed for wet and damp locations,these rugged glass reinforced nyloncovers provide protection for bothstraight blade and locking applications.Meets 2014 NEC® 406.9 (A) and406.9 (B)(2).Cast aluminum FS boxesPowder coated finish forexceptional durability.Weatherproof product familiesT ough environments require tough solutionsOur broad offering of weatherproof products are designed forimpact resistance, corrosion resistance, UV resistance andlongevity in virtually any outdoor or indoor, wet or damp locationCompliances, specifications and availability are subject to change without notice.Wet locations for 15A and 20A receptacles NEC ® 406.9The NEC defines wet locations as installations underground or in concrete slabs or masonry in direct contact with the earth; in locations subject to saturation with water or other liquids, such as vehicle washing areas; and in unprotected locations exposed to weather.NEC ® article 406.9 (B)(1) requires all 15- and 20-ampere, 125- and 250-volt receptacles installed in a wet location to have an enclosure that is weatherproof whether or not the plug is inserted. These receptacles must use a while-in-use cover.Applicable Arrow Hart products:WIU-1WIU-1DWIU-2WIUMV-1WIUMH-1Wet locations for other receptacles NEC ® 406.9 (B)(2)All other receptacles installed in a wet location shall comply with (B)(2)(a) or (B)(2)(b).(a) A receptacle installed in a wet location, where the product intended to be plugged into it is not attended while in use, shall have an enclosure that is weatherproof with the attachment plug inserted or removed.(b) A receptacle installed in a wet location where the product intended to be plugged into it will be attended while in use (e.g. portable tools) shall have an enclosure that is weatherproof when the attachment plug is removed.Applicable Arrow Hart products:WLRS17420CR 777020416D S1952S2966S989WLRS27420A 7788WP1S1954S3966S966AH78795741NS 20446N WP2S2962S992S196674207420C20416NS1951S3962S994S993Damp locations for receptacles NEC ® 406.9 (A)A damp location is defined as a location protected from weather and not subject to saturation with water or other liquids but subject to moderate degrees of moisture. Examples of such locationsinclude partially protected locations under canopies, marquees, roofed pen porches, and like locations, and interior locations subject to moderated degrees of moisture, such as basements, barns, and cold storage buildings.NEC ® article 406.9 (A) requires receptacles installed in damp locations to have an enclosure for the receptacle that is weatherproof when the receptacle is covered (attachment plug is not inserted and receptacle cover is closed).An installation suitable for wet locations shall also be considered suitable for damp locations.Therefore, all catalog numbers noted for compliance to 406.9 (B)(1) and 406.9 (B)(2) are also suitable for use in damp locations.Applicable Arrow Hart products:S1961S1962Wet or damp locations for switches NEC ® 404.4A surface-mounted switch or circuit breaker in a damp or wet location shall be enclosed in a weatherproof enclosure, and flush-mounted switches and circuit breakers in damp or wet locations shall be equipped with a weatherproof cover.Applicable Arrow Hart products:S983S984S2983S3999NEC® complianceCompliances, specifications and availability are subject to change without notice.Deluxe weatherproof covers for FS/FD boxesFeatures•UL Listed for wet locations (cover closed) and damp locations (cover open or closed)• Meets 2014 NEC ® 406.9 (A) and 406.9 (B)(2)•Diecast copper free aluminum with epoxy finish provides maximum corrosion resistance• Self-closing spring door assures full protection •EPDM gasketing material on WLRD1 andWLRS1 provide excellent resistance to ozone, weathering and temperatures from -46ºC to 127ºC (-50ºF to 260ºF)Standard weatherproof covers for FS/FD boxesFeatures•UL Listed for wet locations (cover closed) and damp locations (cover open or closed)• Meets 2014 NEC ® 406.9 (A) and 406.9 (B)(2)•Self-closing spring door assures full protection•Gasketing material provides excellent resistance to weather•Duplex covers can be used with any duplex receptacleDiecast aluminum receptacle coversDescriptionCatalog no.Duplex receptacle cover, horizontal mountingSingle receptacle cover, vertical mounting, 1.38" (34.9mm) face diameter, use with 15A, 20A straight blade and 15A receptaclesSingle receptacle cover, vertical mounting, 1.56" (39.7mm) face diameter, use with 20A and 30A receptaclesSingle receptacle cover, vertical mounting, 1.38-1.56" (34.9-39.7mm) face diameter, use with 15A and 20A single straight blade receptacles and 15A, 20A and 30A single receptacles•Single receptacle cover, vertical mounting, 1.38-1.56" (34.9-39.7mm) face diameter,yellow corrosion resistant finish, used with 15A and 20A single straight blade receptacles and 15A, 20A and 30A single receptacles•Single receptacle, vertical mounting for 2.12" (53.8mm) face diameter, use with 30A straight blade receptacles•* Not UL ListedNote: Cat. no. 7420, 7420CR have inserts for protecting toggle; can be used with most standard length toggle switches.Compliances, specifications and availability are subject to change without notice.Weatherproof receptacle coversIndustrial specification grade device coversProduct descriptionMetal covers for FS/FD boxes1.13" WLRD14.44"(112.8mm)1.13" 3.30"Dia. 1.20" 7420Weatherproof covers for 30A, 50A & 60A straight blade receptaclesFeatures•UL Listed for wet locations (cover closed) and damp locations (cover open or closed)•Meets 2014 NEC ® 406.9 (A) and 406.9 (B)(2)• Self-closing spring door assures full protection•Gasketing material provides excellent resistance to weatherWeatherproof covers for 50A locking devices in FS/FD boxesFeatures•UL Listed for wet locations (cover closed) and damp locations (cover open or closed)•Meets 2014 NEC ®406.9 (A) and 406.9 (B)(2)• Self-closing spring door assures full protection •Gasketing material provides excellent resistance to weatherWeatherproof covers for power-lock devices in FS/FD boxesFeatures•UL Listed for wet locations (cover closed) and damp locations (cover open or closed)•Meets 2014 NEC ®406.9 (A) and 406.9 (B)(2)• Self-closing spring door assures full protection •Gasketing material provides excellent resistance to weatherDiecast aluminum receptacle coversDescription Catalog no.Weatherproof lift lid cover for 4.69" (119.10mm) flush box, use box 2.125" (53.96mm) deep or larger5741NS*Weatherproof lift lid cover for FS/FD boxes, use box 2.125" (53.96mm) deep or larger * Not UL ListedGlass-filled nylon lift lid coverY•Glass-filled nylon lift lid cover BK•Glass-filled nylon lift lid coverGY•Glass-filled nylon lift lid cover for 4-wire 30A receptacles GY•Lift lid cover for 4-wire 30A receptacles Diecast aluminum•* Not CSA certifiedColor information:BK (Black), GY (Gray), RD (Red), Y (Yellow)(Black)(Gray)(Red)(Yellow)(Diecast Aluminum)Industrial specification grade device coversProduct descriptionMetal and nylon coversWeatherproof receptacle covers3.29"Dia.1.88" 1.19" Compliances, specifications and availability are subject to change without notice.Weatherproof nylon covers for 15A, 20A & 30A devicesFeatures•UL Listed for wet locations (cover closed) and damp locations (cover open or closed)• Meets 2014 NEC ® 406.9 (A) and 406.9 (B)(2)•Rugged, glass-filled nylon provides high strength and wide temperature range for long life in abusive environments•Easy mounting on FS/FD boxes or equipment panels•Self-closing lift lid cover with neoprene gasket and stainless steel spring provides weather-proof protection•Universal mounting holes to accept all Eaton’s 15 & 20A and 30A locking flanged inlets and outlets, receptacles as well as devices with similar dimensions from other manufacturersMetal while-in-use cover boxesFeatures•Meets 2014 NEC ® 406.9 (B)(1) for receptacles indamp or wet locations for one or two family dwellings • Diecast powder coated aluminum •NEMA Type 3R rating•Comes with gasket, mounting hardware, duplex receptacle insert and GFCI receptacle insert•Lockable to prevent accidental disconnectsFor 20 & 30A flanged inlets& outlets and 30 & 50A, 3-W straight blade receptacles Two sets of 3 equally spaced holes: 3 holes on 2.5" (63.5mm) bolt dia. circle and 3 holes on 2.69" (68.3mm) bolt dia. circleGY2.25" (57.15mm)WP2••* Not CSA certifiedMetal protective coversWIUMV-1Horizontal mount2GY3.25" deep (82.6mm)WIUMH-1••Extra duty metal while-in-use protective coversHorizontal mount2GY3.25" deep (82.6mm)WIUMH-1X•Compliances, specifications and availability are subject to change without notice.Color information:GY (Gray)Weatherproof receptacle coversWeatherproof covers for locking and straight blade receptaclesMetal weatherbox while-in-use weather protective coversProduct descriptionNylon covers for FS/FD boxesProduct descriptionMetal 1-Gang lockable cover boxes(115.8mm)(47.5mm)WP14.56"(115.8mm)WP23.50"WIUM insertsWIU-1HXHorizontal mount 1W WIU-1WHX •Vertical mount1GY WIU-1VX •Vertical mount 1W WIU-1WVX •Horizontal/vertical mount2GY WIU-2X •Horizontal/vertical mount2WWIU-2WX•Features•Meets 2014 NEC ® 406.9 (B)(1) extra duty requirements for any application• Rugged UV-resistant polycarbonate cover and back protects devices without cracking or breaking and is non-corrosive and non-conductive • Self-closing cover•Box inserts accommodate decorator devices, duplex receptacles and a variety of single receptacle sizes and toggle switches•1-Gang box includes 3 inserts for 16 different configurations•2-Gang box includes 4 inserts for over 60 different configurations• Cord cover opening fits #12 AWG or lighter cord •Includes pre-mounted gasketFeatures•Rugged UV-resistant polycarbonate cover and back protects devices without cracking or breaking and is non-corrosive and non-conductive•Moveable hinges reposition easily for vertical or horizontal mounting (1-Gang only)•Self-closing cover•1-Gang box includes 3 inserts for 16 different configurations•2-Gang box includes 4 inserts for over60 different configurations • Includes pre-mounted gasket•Meets Canadian electrical code rule 26-702WIU-1Horizontal/vertical mount 1W 3.25" deep (82.6mm) WIU-1W •Horizontal/vertical mount 1GY 4.75" deep (120.7mm) WIU-1D •Horizontal/vertical mount 2GY 3.25" deep (82.6mm) WIU-2•Horizontal/vertical mount2W3.25" deep (82.6mm)WIU-2W•Extra duty while-in-use weather protective coversProduct description1-Gang extra duty, self-closing 2-Gang extra duty, self-closingWeatherproof while-in-use coversWhile-in-use weather protective coversProduct description1-Gang self-closing1-Gang extra depth, self-closing 2-Gang, self-closing Single gang inserts5.75"2-Gang insertsColor information:GY (Gray), W (White)Compliances, specifications and availability are subject to change without notice.(Black)(Gray)(White)Non-metallic weatherproof covers1.44"(36.6mm)S1954S2966S2983(60.2mm)4.56" Non-metallic weather protective coversProduct description1-Gang self-closing, 1-Gang switch cover, 1-Gang stay openS2983Duplex receptacle/combination deviceHorizontalBK, GY, WS1962__•S1951__Duplex receptacle/combination device 2 self-closing lids Horizontal GY, W S1952__†•Oversize duplex receptacle/combination device Horizontal GY S1954*•Duplex receptacle Vertical GY, W S2962__**•Horizontal GY, W S3962__**•GFCI/decorator Vertical GY, W S2966__**•HorizontalBK, GY, WS3966__**•* UL Listed†UL Listed and CSA cert ** cULus ListedNon-metallic weatherproof receptacle coversFeatures•UL Listed for wet locations with cover closed • Meets 2014 NEC ® 406.9 (A) and 406.9 (B)(2)•Tough plastic construction resistant to high impact and sunlight• Non-corrosive and non-conductive•Gasket provided seals both device openings and edgesNon-metallic weatherproof switch coversFeatures• Switch lockable in “ON” or “OFF” position • Red switch handle for easy visual location •Meets 2014 NEC ® 404.4•Factory-attached gasket to cover minimizes labor for installerNon-metallic protective receptacle coversFeatures• Not for use in wet locations• Tough plastic construction resistant to high impact •Non-corrosive and non-conductive•Gasket provided seals both device and openings and edgesS992Duplex receptacleVertical GY S994••Duplex receptacle, 2 self-closing lids Horizontal BLK, GY S989__••GFCI/decorator receptacleVertical GY S966-SP ••Horizontal GY S1966-SP ••20A and 30Areceptacles 1.625" (41.27mm) dia. openingVerticalGYS993-SP••S1987Metal weatherproof covers - wet locationsFeatures• Meets 2014 NEC ® 406.9 (A) and 406.9 (B)(2)•Gasket provided seals both device openings and edges•Electrostatically painted with a baked, weather-resistant powder coat finish forexceptional durabilityCompliances, specifications and availability are subject to change without notice.Color ordering information:For ordering devices, include Catalog no. followed by the Color suffix: BLK (Black), GY (Gray).(Black)(Gray)Metal weatherproof coversProduct descriptionMetal 1- & 2-Gang self-closing covers 1-Gang blank wallplatesMetal weatherproof coversS992S1966Weatherproof covers - wet locationsFeatures•UL Listed for wet locations (with cover closed S3999)•Meets 2014 NEC ® 404.4• Ready for outdoor installation•Gasket seals both openings and edges1-Gang metal cover with switch5250S9833-Way toggle switch with metal switch coverVerticalGYS984••1-Gang plastic cover with motor base inletweatherproof cover #3963S39991113Non-metallic FS box 6080*•*UL Listed onlyCompliances, specifications and availability are subject to change without notice.11136080Color information:GY (Gray)Weatherproof covers with devicesWeatherproof covers & devicesProduct descriptionMetal & plastic 1-Gang covers2.83"2.95".75" S3999Cast aluminum weatherproof FS boxesFeatures•Electrostatically painted with a baked, weather-resistant powder finish for exceptional durability •Accept single gang weatherproof cover and standard FS covers•UL Listed for wet and damp locations with appropriate cover installed•Mounting lugs provide strength and durability on any mounting surface•Raised knockout studs on back of box provide alternative means for wall mounting. Strike desired studs with sharp hammer blow for clean mounting holes•Easy access ground screw hole locatedinside back wall of box• Threaded outlets for conduit and connectors •Two closure plugs and mounting lugs furnished11134 hole 0.50" (12.70mm) dia.2-11 1114••5 hole 0.50" (12.70mm) dia.2-21 1115••3 hole 0.75" (19.05mm) dia.1-11 1116••5 hole 0.75" (19.05mm) dia.2-211118••Non-metallic weatherproof 1-Gang FS boxesDescriptionColorCatalog no.FS Box with (2) 0.75" (19.05mm) IPS molded-in knockouts BK 6080Compliances, specifications and availability are subject to change without notice.Color information:BK (Black)(Black)1-Gang boxesProduct descriptionCast aluminum FS boxes Non-metallic FS boxes1-Gang weatherproof boxes2.00" 11136080Color ordering information:For ordering devices, include Catalog no. followed by the Color suffix: B (Brown), BK (Black), GY (Gray), LA (Light Almond), V (Ivory), W (White), Y (Yellow)Corrosion resistant straight blade & locking receptaclesAH5262CR__L5-15Locking duplex receptacle Y CR4700•201255-20Straight blade duplex receptacle GY, Y AH5362CR__•L5-20Locking single receptacle Y CRL520R •250L6-20Locking single receptacle Y CRL620R •125/250L14-20Locking single receptacle Y CRL1420R •3Ø 250L15-20Locking single receptacle Y CRL1520R •30125L5-30Locking single receptacle Y CRL530R •250L6-30Locking single receptacle Y CRL630R •CRL1430RWeather resistant commercial grade receptaclesWRBR15__WR receptacles comply with the requirements NEC 406.9(A) & (B)Additional WR products and information on (A-18)Specification grade GFCIsWRSGF15__TWR duplex GFCI, back & side wire B, GY, LA, V, W TWRSGF15__201255-20RWR duplex GFCI, back & side wire B, BK, GY, V, W WRSGF20__TWR duplex GFCI, back & side wireB, GY, LA, V, WTWRSGF20__Includes standard size unbreakable wallplate unless otherwise noted Additional GFCI products and information on (H-8)Harsh environment receptaclesHarsh environment receptaclesProduct descriptionCorrosion & weather resistant receptaclessuitable for use with weatherproof covers & boxesAH5362CRY1.62"(28.5mm)Features•Neoprene resists oil, grease, and acids plus has long life properties•Flexible and easy to apply to plug or connector•Cord hole opening can be cut away for large diameter cordsPlug and connector weather protective bootsBS215A industrial locking devices BS2•20A 2-wire industrial locking devicesBS2•20A and 30A 2-pole, 3-wire and 3-pole, 3-wire locking safety grip devices BM2•20A and 30A 4-wire and 5-wire industrial locking devicesBL2•Midget locking ML2 plugs and connectors when used with receptacle or inlet74CM40•7716EX Long boot, for 50A pro grip plug when used with receptacle or 50A pro grip connectorand 7716EX boot7717EX•Weather protective bootsProduct descriptionFor straight blade & locking devices Weather protective bootsBS1BM1BM27716EXCompliances, specifications and availability are subject to change without notice.。

Elkay Lustertone Iconix 16 Gauge Stainless Steel 单

PRODUCT SPECIFICATIONSElkay Lustertone Iconix™ 16 Gauge Stainless Steel 23-5/8" x 21-1/4" x 9" Single Bowl Undermount Sink Kit with Perfect Drain. Sink ismanufactured from 16 gauge 304 Stainless Steel with a Luminous Satin finish, Rear Center drain placement, and Sides and Bottom pads.required to open the template.Special Note: Reserve Selection products are sold exclusively, in-store and online, through authorized wholesalers.Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap between a traditional drain and the sink for a sanitary and gap free installation. Select garbage disposers can be installed on either sink bowl for user convenience. Please see our Garbage Disposer Compatibility Guide.Hole Drilling Configurations:Included with Product:One LKWOBG2118SS bottom grid, one LKPD1 Perfect Drain and strainerA Century of Tradition and Quality. For more than 100 years, Elkay has been making innovative products and providing exceptional customer care. We take pride in offering plumbing products that make life easier, inspire change and leave the world a better place.Product Compliance:ASME A112.19.3/CSA B45.4 Buy American ActAccessory:ASME A112.18.2/CSA B125.2Sinks are listed by IAPMO ® as meeting the applicable requirements of the Uniform Plumbing Code ®, International Plumbing Code ®, and National Plumbing Code of Canada.Clean and Care Manual (PDF)Installation Instructions (PDF) - 1000002045Installation Instructions (PDF) - 74180289_Disposer Installation Instructions (PDF) - 74180340-USA_Drain Installation Instructions (PDF) -Garbage_Disposer_Compatibility_Guide Warranty (PDF)PART:________________________________QTY: _____________ PROJECT:______________________________________________ CONTACT:______________________________________________ DATE:__________________________________________________ NOTES:_________________________________________________ APPROVAL:_____________________________________________Installation Profile:。

HDMI KVM Extender Switch 用户手册说明书

H22079英文说明书AH1 V2.0 ： 0106010022091材质:157g铜版纸骑马钉尺寸：100x138mm· Important Safety Instructions1. To prevent electric shock, please ensure that all devices are properly grounded.2. Do not place this device near or over a radiator or heat register, or whereit is exposed to direct sunlight.3. Place the device in a well-ventilated area, do not block any ventilationopenings.4. Do not expose this device to rain or place it near water. Any liquid that goesinto the device may cause a failure, fire, or electric shock.5. Do not place the device on an uneven or unstable surface. The device mayfall resulting in a malfunction.6. Never insert anything metallic into the open parts of this device. This maycause a danger of electric shock.7. The device should be repaired only by a qualified technician.8. If a third-party power supply is used, please ensure that the power supplyspecifications meet the product requirements.· IntroductionThis is a 4-in-1-out ultra-high-definition KVM extender switch, comprises a transmitting end and a receiving end. It supports 4 HDMI signal inputs and 1 HDMI signal output, the 4K@60Hz HDMI signal can be extended to 70 meters through CAT6 or above network cable, the highest resolution is 4K@60Hz and is backward compatible, supports KVM control. A variety of control methods (IR remote control, button and RS-232) can easily switch the content of the 4 HDMI signal sources to the display. The product is widely used in securitymonitoring, education and training, exhibitions and broadcasting, command centers, etc.User manual x1Screw x10 Terminal Block x11-white and orange 2-orange 3-white and green 4-blue 5-white and blue 6-green 7-white and brown 8-brownQ: Picture quality is not fluent and stable?A: 1) Please check and make sure all HDMI cables are connected well. 2) Try to connect the source device to display device directly, or change to another source device for a try to see the picture quality.3) Please use high quality HDMI standard cable when HDMI 4K signal input.· SpecificationPower consumption TX<4W RX<4WVoltage/Current DC 5V/1A HDCP complianceHDMI 2.0 (HDR, YUV4:4:4)HDMI compliance HDCP 2.2, and HDCP1.4Transmission speed 18Gbps Video bandwidth600MHzHDMI input x4RJ45 port x13 pin（GND/RxD/TxD）, baud rate 9600HDMI port RJ45 port RS-232Transmission DistanceCAT6/6A/7LPCM7.1/DTS-HD/DTS-Audio/Dolby Digital plus/Dolby TrueHD 5.1/Dolby Digital/Dolby Atmos ≤70m≤40m: 4096x2160@24/25/30Hz, 3440x1440, 2560x1600, 2560x1440480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz,1080i@50/60Hz, 1080p@50/60Hz, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz, 1280x960, 1280x800, 1280x768, 1680x1050, 1360x768, 1366x768, 1600x900, 1024x768, 800x600, 3440x1440, 2560x1600, 2560x1440, 1920x1200HDMI resolutionSupports audio formatsPower supplyItemSpecification HDMIPerformance And InterfaceElectrostaticprotection of the whole machineElectrostatic protection1a Contact discharge level 21b Air discharge level 3 Implementation of the standard: IEC61000-4-2lightning protection, surge protection Storage temperature -20~60℃Working temperature -30~70℃Humidity(no condensation)0～90%RHProtection LeverOperating EnvironmentMaterial TX：250(L) x 80(W) x 25(H)mm RX：106(L) x103(W) x25(H)mm DimensionIron Color BlackWeightTX: 542g RX: 298gBodyproperties。

AZ 16ZI 商品说明书

DataOrdering data Product type description AZ 16-03ZI-B1-2177 MIT ZENTRIERHILFE Article number (order number)101150059EAN (European Article Number)4030661154534eCl@ss number, Version 9.027-27-26-02eCl@ss number, Version 11.027-27-26-02Approval - StandardsCertificatesTÜV EACGeneral data Product nameAZ 16ZI Coding level according to ISO 14119HighEnclosure material Plastic, glass-fibre reinforced thermoplastic, self-extinguishing Material of the actuatorStainless steelMaterial of the contacts, electrical Silver Gross weight150 gAZ 16-03ZIB1-M16-2177Long lifeDouble-insulated Individual coding52 mm x 90 mm x 30 mm Insensitive to soiling Thermoplastic enclosure Large wiring compartment3 cable entries M 16 x 1.5Coding level "High" according to ISO 14119For interlocking of light, unguided guardsSlotted holes for adjustment, circular holes for locationHigh level of contact reliability with lowvoltages and currentsGeneral data - FeaturesEjection force YesNumber of safety contacts3Safety appraisalStandards ISO 13849-1Mission Time20 Year(s)Safety appraisal - Safety outputsB10d Normally-closed contact (NC)2,000,000 Operations Mechanical dataActuating radius, minimum250 mmActuator straight rigidMechanical life, minimum1,000,000 OperationsLatching force30 Npositive break travel8 mmPositive break force, minimum30 NActuating speed, maximum 2 m/sMechanical data - Connection techniqueTerminal Connector Screw terminalsCable section, minimum0.75 mm²Cable section, maximum 2.5 mm²Note (Cable section)All indications about the cable section are including the conductor ferrules. Mechanical data - DimensionsLength of sensor30 mmWidth of sensor52 mmHeight of sensor90 mmAmbient conditionsDegree of protection IP 67 to IEC/EN 60529Ambient temperature, minimum-30 °CAmbient temperature, maximum+80 °CAmbient conditions - Insulation valueRated impulse withstand voltage Uimp6 kVElectrical dataThermal test current10 ASwitching element Opener (NC) Switching principle Creep circuit elementElectrical data - Safety contactsVoltage, Utilisation category AC15230 VACCurrent, Utilisation category AC-154 AVoltage, Utilisation category DC1324 VDCCurrent, Utilisation category DC13 4 AScope of deliveryIncluded in delivery Slot sealing plugs Delivery scope of MountingmaterialTamperproof screws NotesNote (General)The axis of the hinge must be 11 mm above and in a parallel plane to the top surface of the safety switch.Minimum actuating radius on hinged guards 250 mmThe actuator is not available separately.Ordering codeProduct type description:AZ 16-(1)ZI-(2)-(3)(1)033 NC contact121 NO contact/2 NC contacts(2)B1straight designB1-1747straight design with magnetic latch B1-2024straight design with slot-lip sealB1-2053straight design with ball latchB1-2177straight design with centering guide B6L angled, flexible to the leftB6R angled, flexible to the right(3)M16cable entry M16M20Cable entry M20PicturesProduct picture (catalogue individual photo)ID: kaz16f11| 64,3 kB | .png | 73.731 x 143.581 mm - 209 x 407Pixel - 72 dpi| 674,9 kB | .jpg | 352.778 x 685.094 mm - 1000 x1942 Pixel - 72 dpiDimensional drawing basic componentID: kaz16gi1| 49,5 kB | .cdr || 283,3 kB | .jpg | 352.778 x 548.569 mm - 1000 x1555 Pixel - 72 dpi| 8,1 kB | .png | 74.083 x 115.006 mm - 210 x 326Pixel - 72 dpiSwitch travel diagramID: kaz16si6| 19,9 kB | .cdr || 1,9 kB | .png | 74.083 x 31.75 mm - 210 x 90 Pixel -72 dpi| 62,1 kB | .jpg | 352.778 x 150.636 mm - 1000 x 427Pixel - 72 dpiDiagramID: k3o--k04| 88,2 kB | .jpg | 352.778 x 171.803 mm - 1000 x 487Pixel - 72 dpiDimensional drawing actuatorID: kaz16bi1| 143,2 kB | .jpg | 352.425 x 365.125 mm - 999 x 1035Pixel - 72 dpi| 4,5 kB | .png | 74.083 x 76.553 mm - 210 x 217 Pixel- 72 dpiDimensional drawing actuatorID: kaz15b04| 5,5 kB | .png | 74.083 x 73.378 mm - 210 x 208 Pixel- 72 dpi| 173,6 kB | .jpg | 352.778 x 348.897 mm - 1000 x 989Pixel - 72 dpiOperating principleID: kaz16ai3| 20,3 kB | .png | 74.083 x 53.269 mm - 210 x 151Pixel - 72 dpi| 216,0 kB | .jpg | 352.778 x 254.353 mm - 1000 x 721Pixel - 72 dpi| 65,5 kB | .cdr |Actuating radiusID: kaz16ri3| 22,7 kB | .cdr |Actuating radiusID: kaz16ri4| 22,6 kB | .cdr |K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 WuppertalThe details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.Generated on 20/05/2021 05:36:59。

立塔尔产品指南说明书

56For additional technical information visit Metric measurements for this product are exact, imperial measurements are rounded to the nearest whole numberHeight: 55 - 71” (1400 - 1800 mm), Depth: 16 - 20” (400 - 500 mm)Height (H) inches (mm)PU55 (1400)55 (1400)63 (1600)63 (1600)71 (1800)71 (1800)71 (1800)71 (1800)PageWidth (B) inches (mm)32 (800)39 (1000)32 (800)32 (800)32 (800)63 (1600)71 (1800)32 (800)Depth (T) inches (mm)20 (500)20 (500)20 (500)24 (600)16 (400)16 (400)16 (400)20 (500)Panel Height (G1) inches (mm)51 (1296)51 (1296)59 (1496)59 (1496)67 (1696)67 (1696)67 (1696)67 (1696)Panel Width (F1) inches (mm)28 (699)35 (899)28 (699)28 (699)28 (699)59 (1499)67 (1699)28 (699)Part No.18945.5808945.5008965.5008966.5008984.5008901.6008901.6208985.500Door(s)11111221Weight lb (kg)163 (74)203 (92)186 (84)223 (101)250 (114)335 (152)377 (171)255 (116)Walls Sidewalls 28145.2358165.2358166.2358184.2358185.235285Base/plinthComponents front and rear inches (mm)Height 4 (100) 1 set 8601.8008601.0008601.8008601.9208901.9208601.800276Height 8 (200) 1 set 8602.8008602.0008602.8008602.9208901.9308602.800276Side panels inches (mm)Height 4 (100) 1 set 8601.0508601.0608601.0408601.0408601.050276Height 8 (200)1 set8602.0508602.0608602.0408602.0408602.050276AccessoriesHandle interlocking kit (included with enclosure)1 kit 8611.310309Slave door interlocking kit 14911.000308Interlocking rods 24" (600 mm)104916.000308Interlocking rods 32" (800 mm)104918.000308Interlocking rods 47" (1200 mm)104920.000308Lock SystemsStandard double-bit lock insert may be exchanged for a comfort handle and other lock inserts, see pages 302-306.Material:Sheet steelEnclosure frame, roof, rear wall, and gland plates: 16 ga (1.5 mm)Door and trim panel: 14 ga (2.0 mm)Mounting panel: 11 ga (3.0 mm)Finish:Enclosure frame: Dipcoat-primedDoor, trim panel, roof, and rear wall: Dipcoat-primed, powder coated on the outside in textured RAL 7035 (light gray)Mounting panel and gland plates:Zinc-platedProtection Ratings:UL Type 12(IP 55 to EN 60 529/10.91)(with disconnect handle installed)UL ﬁle: E76083Configuration:Enclosure frame, door (lefthinged), trim panel (right hinged, with a swing lever at the top and bottom, with cut-out for disconnect handle), roof, rear wall, mounting panel, three-piece gland plates. Includes handle interlocking kit 8611.310.Note: See page 309 for FMD Operator Information.TBB 2HFGC o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a57For additional technical information visit Height: 71 - 79” (1800 - 2000 mm), Depth: 20 - 24” (500 - 600 mm)Height (H) inches (mm)PU71 (1800)71 (1800)71 (1800)71 (1800)79 (2000)79 (2000)79 (2000)79 (2000)PageWidth (B) inches (mm)39 (1000)63 (1600)71 (1800)71 (1800)32 (800)39 (1000)63 (1600)71 (1800)Depth (T) inches (mm)20 (500)20 (500)20 (500)24 (600)20 (500)20 (500)20 (500)20 (500)Panel Height (G1) inches (mm)67 (1696)67 (1696)67 (1696)67 (1696)75 (1896)75 (1896)75 (1896)75 (1896)Panel Width (F1) inches (mm)35 (899)59 (1499)67 (1699)67 (1699)28 (699)35 (899)59 (1499)67 (1699)Part No.18980.5008901.6108901.6308901.6408905.5008995.5008901.6508901.680Door(s)12221122Weight lb (kg)262 (119)418 (190)471 (214)565 (256)278 (126)291 (132)488 (221)523 (237)Walls Sidewalls 28185.2358186.2358105.235285Base/plinthComponents front and rear inches (mm)Height 4 (100) 1 set 8601.0008601.9208901.9208601.8008601.0008601.9208901.920276Height 8 (200) 1 set 8602.0008602.9208901.9308602.8008602.0008602.9208901.930276Side panels inches (mm)Height 4 (100) 1 set 8601.0508601.0608601.050276Height 8 (200)1 set8602.0508602.0608602.050276AccessoriesHandle interlocking kit (included with enclosure)1 kit 8611.310309Slave door interlocking kit 14911.000308Interlocking rods 24" (600 mm)104916.000308Interlocking rods 32" (800 mm)104918.000308Interlocking rods 47" (1200 mm)104920.000308Lock SystemsStandard double-bit lock insert may be exchanged for a comfort handle and other lock inserts, see pages 302-306.Height: 79 - 87” (2000 - 2200 mm), Depth: 20 - 32” (500 - 800 mm)Height (H) inches (mm)PU79 (2000)79 (2000)79 (2000)79 (2000)79 (2000)79 (2000)87 (2200)87 (2200)PageWidth (B) inches (mm)32 (800)39 (1000)63 (1600)71 (1800)32 (800)63 (1600)32 (800)39 (1000)Depth (T) inches (mm)24 (600)24 (600)24 (600)24 (600)32 (800)32 (800)24 (600)20 (500)Panel Height (G1) inches (mm)75 (1896)75 (1896)75 (1896)75 (1896)75 (1896)75 (1896)83 (2096)83 (2096)Panel Width (F1) inches (mm)28 (699)35 (899)59 (1489)67 (1699)28 (699)59 (1499)28 (699)35 (899)Part No.18906.5008996.5008901.6608901.6908908.5008901.6708926.5008958.500Door(s)11221211Weight lb (kg)288 (131)366 (166)586 (266)628 (285)372 (169)744 (337)307 (139)320 (145)Walls Sidewalls 28106.2358108.2358126.2358125.235285Base/plinthComponents front and rear inches (mm)Height 4 (100) 1 set 8601.8008601.0008601.9208901.9208601.8008601.9208601.8008601.000276Height 8 (200) 1 set 8602.8008602.0008602.9208901.9308602.8008602.9208602.8008602.000276Side panels inches (mm)Height 4 (100) 1 set 8601.0608601.0808601.0608601.050276Height 8 (200)1 set8602.0608602.0808602.0608602.050276AccessoriesHandle interlocking kit (included with enclosure)1 kit 8611.310309Slave door interlocking kit 14911.000308Interlocking rods 24" (600 mm)104916.000308Interlocking rods 32" (800 mm)104918.000308Interlocking rods 47" (1200 mm)104920.000308Lock SystemsStandard double-bit lock insert may be exchanged for a comfort handle and other lock inserts, see pages 302-306.C o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a。

Fast Fill CryoVac 16MM 1.5 Gallon Squeeze Bottle F

MODEL:FAST FILL,SQUEEZE BOTTLE FILLING STATION,CRYOVAC™ FITMENT 16MM 1.5 GALLONSeries 13E87690FSF01955-REVA�080414�ENGLISHSAFETY GUIDELINES WHEN USING THIS UNIT:According to food and safety regulations, most foods must be stored and/or served at certain temperatures or they could become hazardous. Check with local food and safety regulators for specific guidelines.Be aware of the product you are serving and the temperature the product is required to maintain. Server Products, Inc. can not be responsible for the serving of potentially hazardous product.Stainless steel is one of the best materials for foodserving and storage, but there are many products which can corrode it. If you notice corrosion beginning on any stainless steel surface, you may need to change the cleansing agent, sanitizing agent, or the cleaning procedures you are using.• Products containing: acids, alkalines, chlorine, or salt can corrode stainless steel.INSTALLATION OPTIONSThis unit can be set onto a countertop or mounted onto a wall. There are four mounting holes available on backside of unit.UNIT SET-UPALWAYS CLEAN UNIT THOROUGHLY BEFORE EACH USE AND AFTER USE DAILY .1 POSITION PLUNGER UP ONTO PLUNGER REST TOINSTALL PRODUCT POUCH.• Open unit door by lifting latch.• Lift up handle and plunger assembly by depressing handle lever release and lifting handle intohorizontal position to allow plunger rod to move up freely.• Tip plunger front up enough to position plunger back up onto plunger rest on back wall of unit.2 INSTALL VALVE BODY AND CONNECTOR ASSEMBLYONTO PRODUCT POUCH.• Ensure valve nut is installed onto valve body with threading facing out.• Install connector into valve body and secure with valve nut threading.• Place product pouch on a counter top with circular pouch fitment facing upward. • Position valve body and connector assembly directly over center of circular pouch fitment.• Press valve body and connector assembly down to pierce through film in circular pouch fitment. Valve body and connector assembly will “snap” securely onto fitment.• Valve body and connector assembly is fully engaged into pouch fitment when surface of circular pouch fitment is flush with connector .• Prime valve body by applying light pressure on end of product pouch while holding valve body like a cup, so that product does not spill out. Continue to press on product pouch until valve body is full of product.• Install silicone valve onto valve body. Push silicone valve down around edges of valve body untilsilicone valve “snaps” securely into groove on edge of valve body.3 INSTALL POUCH, WITH ATTACHED VALVE BODY ,INTO UNIT .• Align connector grooves onto unit valve body holder .• Connector groove which is closest to threaded cap on valve body is the groove which must align and slide into holder .4 RELEASE PLUNGER FROM PLUNGER REST ON BACKWALL OF UNIT .• Close unit door and secure latch.• Tip plunger front up enough to release plunger back up off of plunger rest on back wall of unit.• Set plunger into position resting on product pouch.UNIT OPERATIONPLACE BOTTLE TO FILL DIRECTLY UNDER VALVE BODY .PUSH PLUNGER LEVER DOWN TO DISPENSE PRODUCT FROM POUCH INTO BOTTLE.GENERAL SERVICE, REPAIR, OR RETURNSBefore sending any item to Server Products for service, repair , or return, contact Server Products customer service to request a Return Authorization Number. Merchandise must be sent to Server Products with this number .Merchandise being returned for credit must be in new and unused condition and not more than 90 days old and will be subject to a 20% (percent) restockingcharge. Electrical parts (thermostats, heating elements, etc.) are not returnable.Server Products maintains a fully staffed servicedepartment with highly skilled factory trained personnel. Service is extremely prompt. Under normalcircumstances, a repaired unit is shipped out the day after it is received. Labor charges are reasonable.SERVICEContact your dealer or Server Products Inc. customer service department for the following:ORDERING REPLACEMENT PARTSBe prepared to give this information:• Model Letters/Name/Numbers • Part Numbers- P/N • Series Numbers/Letters • Part DescriptionThis information and other important data is stamped on the lid or cylinder of pumps or on the bottom or back side of every unit.SERVER PRODUCTS LIMITED WARRANTYAll Server Products equipment is backed by atwo-year limited warranty against defects in materials and workmanship. For complete warranty information go to: UNIT TAKE-DOWN1 OPEN UNIT DOOR AND REMOVE PRODUCT POUCHWITH VALVE BODY ATTACHED.2 REMOVE VALVE BODY AND CONNECTOR ASSEMBLYFROM PRODUCT POUCH.• Do not discard valve body, connector, or valve nut.UNIT CLEANINGBEFORE FIRST USE AND AFTER USE DAILY OR REGULARLY , DISASSEMBLE AND CLEAN PARTS. FOR SAFE AND PROPER CARE, AND TO PREVENTCORROSION, OF PARTS, IT IS IMPORTANT TO CLEAN, RINSE, SANITIZE, AND DRY PARTS DAILY ORREGULARLY . FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS MAY VOID UNIT WARRANTY .1 SEE UNIT TAKE DOWN.2 WASH CLEAN ALL WASHABLE PARTS WITHDISHWASHING DETERGENT AND HOT WATER.• Clean all confined areas with any supplied brush(es).• IMPORTANT AREA TO CLEAN: Clean inside valve body thoroughly.• Do not use scrapers, steel pads, steel wool, or other cleaning tools that can scratch surfaces.• Mildly abrasive NYLON or brass brush may be used to remove any stubborn food or mineral deposits on interior surfaces of unit.• Do not use abrasive cleansers.• Do not use caustic cleansers.• Do not use cleansing agents with high concentrations of acid, alkaline or chlorine.• Do not use ammonia based cleansers.3 FULLY RINSE ALL WASHED PARTS THOROUGHLYWITH CLEAR WATER.• To prevent corrosion on parts, it is important to thoroughly and fully rinse washed parts.4 WIPE CLEAN EXTERNAL SURFACES OF UNIT WITHA CLEAN DAMP CLOTH.• Nontoxic glass cleaner may be used to clean stainless steel parts.5 DRY ALL PARTS WITH A CLEAN SOFT CLOTH.• Various elements and minerals, such as chlorides in tap water , can accumulate on stainless steel parts and create corrosion. • To prevent corrosion on stainless steel parts, it is important to thoroughly and fully dry with a clean soft cloth regularly.6 SANITIZE ALL PARTS FOLLOWING LOCALSANITIZATION REQUIREMENTS. ALL PARTS IN CONTACT WITH FOOD MUST BE SANITIZED.• Allow parts to fully air dry after sanitization.。

YTL 集团 H40-52XM-16CH 系列技术指南说明书

H40-52XM-16CH SERIESTECHNICAL GUIDE2h 13m 1h 1h 4h 36~10~m 2xch 6h 7y l 1l 2b 2b 3I.T.R.b 13W ab 11r 1r 2r 2a/2a/2a/2a/2b 10TRUCK DIMENSIONS - DEDICATED CARRIAGEr 1 = radius of swing of container rear corner r 2 = radius of swing of container front corner W a = outside turning radius of the truck a = total operating clearance: = 200 mm (100 mm each side acc. VDI)see VDI line 4-34-3 & 4-34-4V = (theoretical) 90 ~ stacking aisle width, no intrusive stacking V = r 2 + the larger of r 1 or W aAst = (practical) 90 ~ stacking aisle width, no intrusive stackingand with clearance Ast = V + a3h 6xh 13cy h 7h 1l 2m 110Ām 26~10~h 4h 3Powered Pile Slope97 (2,470)Mech. Pile Slope 86 (2,190)CENTRE OF GRAVITYl 1b 2b 3I.T.R.b 13W ab 11r 1r 2r 2a/2a/2a/2a/2b 10r 1 = radius of swing of container rear corner r 2 = radius of swing of container front corner W a = outside turning radius of the truck a = total operating clearance: = 200 mm (100 mm each side acc. VDI)see VDI line 4-34-3 & 4-34-4V = (theoretical) 90 ~ stacking aisle width, no intrusive stacking V = r 2 + the larger of r 1 or W aAst = (practical) 90 ~ stacking aisle width, no intrusive stacking andwith clearance Ast = V + aH40XM-16CH4, H44XM-16CH4, H48XM-16CH4 CONTAINER HANDLERS 1-11-2H52XM-16CH5, H52XM-16CH6, H52XM-16CH6 CONTAINER HANDLERS 1-11-2Engine power output - peak D R I V E 8-1Drive control / transmission Type / #Hydrodynamic Transmission Hydrodynamic Transmission 8-2Transmission manufacturer / type Type / #Spicer Off-Highway / TE-32Spicer Off-Highway / TE-328-4Transmission speeds forward / backward # 4 / 44 / 48-5CouplingType Torque Converter Torque Converter 8-6Wheel drive / drive axle manufacturer / type Type / #Kessler D102Kessler D1028-11Service brake Type Oil immersed discOil immersed disc8-12Parking brakeType Spring applied, dry disc on drive axleSpring applied, dry disc on drive axleS P R E A D E R 9-1Spreader manufacturer / type Type / #Elme / 813Elme / 8189-2DesignTop lift spreader Top lift spreader 9-3Size of containers feet (´)ISO 20' - 40'ISO 20' - 40'9-4Side shift b 8mm +/- 216+/- 4009-5Pile slope spreader ° / type +/- 2.5 / mechanical+/- 6.0 / powered9-6Rotation angle °+/- 4,5+/- 3.09-7Longitudinal adjustment °+/- 210+/- 2409-8Telescoping time, extend / retract °12 / 1212 / 12M I S C10-1Operating pressure for attachments bar 14014010-2Oil volume for attachments l/min 909010-3Hydraulic oil tank, capacity l 62572510-4Fuel tank capacity l 83083010-4-1DEF tank capacity l575710-5Steering designHydrostaticHydrostatic10-6Number of steering rotation6.0 6.010-7Sound pressure level at driver’s seat (7)Lpaz dB(A)747410-7-1Sound power level during the workcycleLwaz dB109109NOTES:Specifications are affected by the condition of the vehicle and how it is equipped, as well as the nature and condition of the operating area. Inform your dealer of the nature and condition of the intended operating area when purchasing your Hyster ® truck.(1) Centre of drive axle to front face of spreader(2) Weights are based on the following specifications: Complete truck with cab, pneumatic tyres, mast as specified, carriage as specified and 20’ – 40’ spreader.(3) Unladen with new tyres(4) Spreader, distance from ground to twistlocks.(5) Full suspension seat in depressed position (6) Capacity 40,000 at 5 high position.(7) Distance centre truck to centre of internal turning radius(8)Gradeability figures are provided for comparison of tractive performance, but are not intended to endorse the operation of vehicle on the stated inclines. Follow instructions in the operating manual regarding operation on inclines.(9) Measured according to the test cycles and based on the weighting values contained in EN12053.(Data available on request, as values are dependent on application.Safety: This truck conforms to the current EU requirements.NOTICE:Care must be exercised when handling elevated loads. Operators must be trained and must read, understand and follow the instructions contained in the Operating Manual.All values are nominal values and they are subject to tolerances. For further information, please contact the manufacturer.Hyster products are subject to change without notice.Lift trucks illustrated may feature optional equipment. Values may vary with alternative configurations.Specification data is based on VDI 2198.CERTIFICATION: Hyster lift trucks meet the design and construction requirements ofB56.1-1969, per OSHA Section 1910.178(a)(2), and also comply with the B56.1 revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.NOTE: Specifications, unless otherwise listed, are for a standard truck without optional equipment.8MAST AND CAPACITY INFORMATIONStacking height 8’6” - 9’6”Lift height h 3 + s (mm)Min.under twistlock h 3.1.1 (mm)Max.under twistlock h 3.1.2 (mm)Lowered height h 1(m) Extended height h 4 (mm)Side shift b 8 (mm)Mast tilt fwd/bwd (°)Truck width b 2 (mm)H40XM-16CH (Dedicated carriage)Capacity spreader retracted Capacity spreader extended c 1 @ 1.400 mm (kg)c 1” @ 1.610 mm (kg)2 S T A G E N F L3 high 7,0102,2809,2906,59410,576+/- 2166/104,20037,10033,4004 high 9,7542,28012,0347,96613,320+/- 2166/104,20035,30031,7505 high 12,6502,28014,9309,45117,392+/- 2166/104,200N / A N / A Stacking height 8’6” - 9’6”Lift height h 3 + s (mm)Min.under twistlock h 3.1.1 (mm)Max.under twistlock h 3.1.2 (mm)Lowered height h 1(m) Extended height h 4 (mm)Side shift b 8 (mm)Mast tilt fwd/bwd (°)Truck width b 2 (mm)H44XM-16CH (Dedicated carriage)Capacity spreader retracted Capacity spreader extended c 1 @ 1.400 mm (kg)c 1” @ 1.610 mm (kg)2 S T A G E N F L3 high 7,0102,2809,2906,59410,576+/- 2166/104,20039,90035,9504 high 9,7542,28012,0347,96613,320+/- 2166/104,20039,30035,4005 high 12,6502,28014,9309,45117,392+/- 2166/104,200N / A N / A Stacking height 8’6” - 9’6”Lift height h 3 + s (mm)Min.under twistlock h 3.1.1 (mm)Max.under twistlock h 3.1.2 (mm)Lowered height h 1(m) Extended height h 4 (mm)Side shift b 8 (mm)Mast tilt fwd/bwd (°)Truck width b 2 (mm)H48XM-16CH (Dedicated carriage)Capacity spreader retracted Capacity spreader extended c 1 @ 1.400 mm (kg)c 1” @ 1.610 mm (kg)2 S T A G E N F L3 high 7,0102,2809,2906,59410,576+/- 2166/104,20040,00040,0004 high 9,7542,28012,0347,96613,320+/- 2166/104,20040,00039,5905 high 12,6502,28014,9309,45117,392+/- 2166/104,200N / A N / A Stacking height 8’6” - 9’6”Lift height h 3 + s (mm)Min.under twistlock h 3.1.1 (mm)Max.under twistlock h 3.1.2 (mm)Lowered height h 1** (mm) Extendedheight h 4** (mm)Side shift b 8 (mm)Mast tilt fwd/bwd (°)Truck width b 2 (mm)H50XM-16CH (Gantry carriage)Capacity spreader retracted Capacity spreader extended c 1 @ 1.509 mm (kg)c 1” @ 1.749 mm (kg)2 S T A G E N F L3 high 7,0102,2809,2906,63111,752+/- 4006/104,20040,00040,0004 high 9,7542,28012,0348,00314,496+/- 4006/104,20040,00040,0005 high 12,6502,28014,9309,45117,392+/- 4006/104,20040,00036,700Stacking height 8’6” - 9’6”Lift height h 3 + s (mm)Min.under twistlock h 3.1.1 (mm)Max.under twistlock h 3.1.2 (mm)Lowered height h 1** (mm) Extended height h 4** (mm)Side shift b 8 (mm)Mast tilt fwd/bwd (°)Truck width b 2 (mm)H52XM-16CH (Gantry carriage)Capacity spreader retracted Capacity spreader extended c 1 @ 1.509 mm (kg)c 1” @ 1.749 mm (kg)2 S T A G E N F L3 high 7,0102,2809,2906,63111,752+/- 4006/104,20040,00040,0004 high 9,7542,28012,0348,00314,496+/- 4006/104,20040,00040,0005 high 12,6502,28014,9309,45117,392+/- 4006/104,20040,00040,0006 high15,5502,28017,83010,90120,292+/- 4006/84,90036,000***36,000***RATED CAPACITIES AND STACKING HEIGHTSDEDICATED CARRIAGEH40XM-16CH4 3 HIGHH44XM-16CH4 3 HIGHH48XM-16CH4 3 HIGHH40XM-16CH4 4 HIGHH44XM-16CH4 4 HIGHH48XM-16CH4 4 HIGH37.135.335.339.939.339.340404037.135.339.939.3404037.135.339.939.34040H52XM-16CH5/ H52XM-16CH6 3 HIGH H52XM-16CH5/ H52XM-16CH6 4 HIGH9FRONT END EQUIPMENTDEDICATED CONTAINER HANDLERDEDICATED CARRIAGEELME 812 TOP LIFT SPREADERDEDICATED CONTAINER HANDLERMPS GANTRY CARRIAGEPPS GANTRY CARRIAGEELME 818 TOP LIFT SPREADER*Standard or Optional in select markets or on select models.Other options available through Special Products Engineering Department (SPED). Contact Hyster for details.FEATURES AND OPTIONSAir conditioning XClimate control X Reading lightX Sun shades on top and rear X Trainer seatX Recirculation fan XRear locking consoleX Rear locking console in cab X Heated top windowX Radio preparation set-up (wiring, two speakers and antenna)X IT console X VISIBILITYSTD OPT External wide angle mirrors mounted on top of front fenders XRear view camera system X Halogen work lights XLED work lightsX High Performance LED work lights X LED twistlock indicator lights X LED stop/tail/brake lightsX LED turn signals, hazard & marker lights X OPERATIONSTD OPT Electric air horn 112 dBAX Visible alarm – Amber strobe light, switch and key switch activatedX Audible alarm – Reverse direction activated 82–102 dB(A), self-adjustingXForward motion alarmX Seatbelt interlock for engine start X Seatbelt indicator light on top of cab X Hydraulic load weighing system X Tire pressure monitoring system X Lockable battery disconnect switch XNATO plug start aidX “Empty seat” engine shutdown, adjustable automaticaly X Non-lockable fuel cap XLockable fuel capX Hyster Tracker wireless asset management system X Hyster Tracker wireless asset management - Access / VerificationXHyster Tracker wireless asset management - Monitoring X Auto greasing system for basic truck & outer boom X Auto greasing system for inner boom and spreader X Auto greasing system for spreader X 24 volt electrical system XEngine block heater 230 volt X Engine block heater 240 volt X Steer wheel lug nut protection XEngine compartment light X APPEARANCESTD OPT Hyster yellow paint base truck XSpecial paint base truckX Hazard warning striping on counterweight X SUPPLEMENTALSTD OPT Literature package X Operator’s manual X CE certification*X Warranty: 12 Months / 2,000 hours manufacturer’s warrantyXwww.hyster.eu*********************/HysterEurope@HysterEurope/HysterEuropeSTRONG PARTNERS. TOUGH TRUCKS.TMFOR DEMANDING OPERATIONS, EVERYWHERE.Hyster ® supplies a complete range of warehouse equipment, IC and electric counterbalanced trucks, container handlers and reach stackers. Hyster ® is committed to being much more than a lift truck supplier.Our aim is to offer a complete partnership capable ofresponding to the full spectrum of material handling issues: whether you need professional consultancy on your fleet management, fully qualified service support, or reliable parts supply, you can depend on Hyster ®.Our network of highly trained dealers provides expert,responsive local support. They can offer cost-effective finance packages and introduce effectively managed maintenance programmes to ensure that you get the best possible value. Our business is dealing with your material handling needs so you can focus on the success of your business today and in the future.HYSTER-YALE UK LIMITED trading as Hyster Europe. Registered Address: Centennial House, Building 4.5, Frimley Business Park, Frimley, Surrey GU16 7SG, United Kingdom.©2018 HYSTER-YALE UK LIMITED, all rights reserved. HYSTER, , STRONG PARTNERS. TOUGH TRUCKS., MONOTROL and are trademarks of HYSTER-YALE Group, Inc.Cummins is a trademark of Cummins Inc. Spicer Off-Highway is a trademark of Dana Inc. Kessler is a trademark of Kessler & Co. GmbH & Co. KG. Continental is a trademark of Continental AG. Goodyear is a trademark of The Goodyear Tire & Rubber Company. MRF is a trademark of Madras Rubber Factory Limited. Bridgestone is a trademark of Bridgestone Corporation.Hyster products are subject to change without notice. Forklift trucks illustrated may feature optional equipment.Printed in EU. Part number: 3990515 Rev.01-12/18-TLCHYSTER EUROPECentennial House, Frimley Business Park, Frimley, Surrey, GU16 7SG, England.T el: +44 (0) 1276 538500。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

HAT2169H
Silicon N Channel Power MOS FET
Power Switching
REJ03G0119-0400
Rev.4.00
Sep 20, 2005
Features
• High speed switching
• Capable of 4.5 V gate drive
• Low drive current
• High density mounting
• Low on-resistance
R DS(on) = 2.8 mΩ typ. (at V GS = 10 V)
Outline
Absolute Maximum Ratings
(Ta = 25°C)
Unit
Ratings
Item Symbol
Drain to source voltage V DSS 40 V
Gate to source voltage V GSS ±20 V
Drain current I D 50 A Drain peak current I D(pulse)Note1 200 A
Body-drain diode reverse drain current I DR 50 A Avalanche current I AP Note 2 30 A Avalanche energy E AR Note 2 72 mJ Channel dissipation Pch Note3 30 W Channel to Case Thermal Resistance θch-C 4.17 °C/W
Channel temperature Tch 150 °C
Storage temperature Tstg –55 to +150 °C
Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1%
2. Value at Tch = 25°C, Rg ≥ 50 Ω
3. Tc = 25°C
Electrical Characteristics
(Ta = 25°C)
Item Symbol Min Typ Max Unit Test Conditions
Drain to source breakdown voltage V (BR)DSS 40 — — V I D = 10 mA, V GS = 0 Gate to source breakdown voltage V (BR)GSS ±20 — — V I G = ±100 µA, V DS = 0 Gate to source leak current I GSS — — ±10 µA V GS = ±16 V, V DS = 0 Zero gate voltage drain current I DSS — — 1 µA V DS = 40 V, V GS = 0 Gate to source cutoff voltage V GS(off) 1.0 — 2.5 V V DS = 10 V, I D = 1 mA
R DS(on) — 2.8 3.5 m Ω I D = 25 A, V GS = 10 V Note4 Static drain to source on state
resistance R DS(on) — 4.0 6.0 m Ω I D = 25 A, V GS = 4.5 V Note4
Forward transfer admittance |y fs | 39 65 — S I D = 25 A, V DS = 10 V Note4 Input capacitance Ciss — 6650 — pF Output capacitance Coss — 890 — pF Reverse transfer capacitance Crss — 360 — pF V DS = 10 V, V GS = 0, f = 1 MHz Gate Resistance Rg — 0.5 — Ω Total gate charge Qg — 45 — nC Gate to source charge Qgs — 21 — nC Gate to drain charge Qgd — 10 — nC V DD = 10 V, V GS = 4.5 V, I D = 50 A Turn-on delay time t d(on) — 15 — ns Rise time t r — 64 — ns
Turn-off delay time t d(off) — 55 — ns Fall time
t f — 9.5 — ns V GS = 10 V, I D = 25 A,
V DD ≅ 10 V, R L = 0.4 Ω, Rg = 4.7 Ω Body–drain diode forward voltage V DF — 0.83 1.08 V IF = 50 A, V GS = 0 Note4
Body–drain diode reverse recovery time
t rr — 40 — ns IF = 50 A, V GS = 0
di F / dt = 100 A/ µs
Notes: 4. Pulse test
Main Characteristics
Package Dimensions
Ordering Information
Part Name Quantity Shipping Container
HAT2169H-EL-E 2500
pcs Taping
Note: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product.
RENESAS SALES OFFICES
Refer to "/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> 2-796-3115, Fax: <82> 2-796-2145
Renesas Technology Malaysia Sdn. Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510。