CADe_S5
KSZ8795 Evaluation Board 用户指南说明书
KSZ8795-POE-EVAL Board(KSZ8795CLX+KSZ9031RNX)Demo Evaluation Board User’s GuideKSZ8795 Family Integrated 5-port Managed Switch with 4 10/100 Copper Ports and Port 5 Gigabit port Rev 1.0 January 2015Table of contents1.0 Introduction (4)2.0 Features (4)3.0 Evaluation Kit Contents (4)4.0 Hardware Description (5)4.1 Strap in Mode (6)4.2 Feature Setting Jumpers (7)4.3 SPI Mode (8)4.4 10/100 Ethernet Ports (8)4.4 10/100/1000 Gigabit Ports (8)4.5 LED indicators (9)5.0 Software Tools Description (10)5.1 Introducing Application Software Tools (10)5.2 Window Driver Installation First (10)5.3 Installation Application Software Tools (13)5.4 DOS SPI Tool (15)5.5 Window SPI Software Tool (16)5.6 LinkMD Software Tool (17)6.0 Reference Documents (19)7.0 Bill of Material (19)8.0 Schematics (19)List of Figures and TablesFigure 1 KSZ8795-POE-EVAL Board (5)Figure 2 KSZ8795-POE-EVAL Board Block Diagram (6)Table 1 General Setting Jumpers (7)Table 2 Power Setting Jumpers (7)Table 3 LED Modes (9)Revision History1.0 IntroductionThe KSZ8795 family is Micrel Operations new generation integrated 5-port switch with Gigabit up-link. The KSZ8795CLX is one of KSZ8795 family. KSZ8795CLX contains four MAC/PHYs for four copper ports and one GMAC5 interface with configurable GMII/RGMII/MII/RMII interfaces. The device had been designed with cost sensitive systems in mind but still offers a multitude of new features such as port based security ACL filtering, 802.1az EEE, LinkMD and so on. Also support port and tag based VLAN; QoS priority; SPI and MDC/MDIO interfaces for the registers access. The KSZ8795 family is an excellent choice in broadband gateway applications, integrated broadband router applications, industrial automatic, automotive, etc. fields and as a standalone switch. The KSZ8795-POE-EVAL board is designed to allow the user to experience Gigabit up-link with KSZ9031 Gigabit PHY to Gigabit port of any processor board directly, and can provide PoE PSE power to other four ports. Other rich feature set can be evaluated on this board. The evaluation board is highly configurable and easy to use.2.0 Features∙Micrel KSZ8795 Integrated 5-port 10/100 Managed Ethernet Switch∙ 4 RJ-45 Jacks for 10/100Base-T/TX Ethernet LAN with Corresponding Isolation Magnetics. ∙Auto MDI/MDIX on All Ports.∙Port 5 SW5-RGMII hook-up with a KSZ9031RNX GPHY and provide a Gigabit port.∙Easily set to different VDDIO of 3.3V, 2.5V and 1.8V by jumpers.∙ 1 USB Port Interface Configurable to Emulate an SPI Interface for all registers access by using Window GUI and DOS based software tools.∙ 2 LEDs per Port with 5 LED sets to indicate the Status and Activity for 4 fast Ethernet ports and1 Gigabit port.∙The board powered can be used by a 12V DC power supply.3.0 Evaluation Kit ContentsThe KSZ8795-POE-EVAL Evaluation kit includes the following:∙KSZ8795-POE-EVAL Evaluation Board Rev. 1.x∙KSZ8795-POE-EVAL Ev aluation Board User’s Guide Rev 1.x∙Micrel SPI Configuration Software tools∙KSZ8795-POE-EVAL Evaluation Board Schematics and BOM∙KSZ8795-POE-EVAL PCB file, Gerber file and IBIS model∙The software, reference schematics and other design information will be found in the Design Kit (Design Package) of the KSZ8795 Ethernet switch products on Micrel website.(Contact your Micrel FAE for the latest schematic).∙One 12V DC power supply.∙The USB cable is not included.4.0 Hardware DescriptionThe KSZ8795-POE-EVAL evaluation board is in a compact form factor and can sit on a bench near a computer with USB connector. There are two options for configuration: strap in mode; SPI mode and Strap-in mode that is easily done with on board jumper options. SPI mode is accomplished through a built in USB port interface. You can configure the KSZ8795 device on board by the USB port. Using Micrel SPI software and your PC, you can access the KSZ8795’s full feature set registers by the USB to SPI interface. The board also features RGMII to hook up a KSZ9031RNX as a Gigabit uplink for Gigabit port 5.The KSZ8795-POE-EVAL evaluation board is easy to use. There are programmable LED indicators for link and activity on all ports and a power LED. A manual reset button allows the user to reset the board without removing the power plug. A standard 12VDC power supply can be used by the power jack so that the user can supply power from any 110-240 Volt AC wall or bench socket.Figure 1 KSZ8795-POE-EVAL BoardFigure 2 KSZ8795-POE-EVAL Board Block Diagram4.1 Strap in ModeStrap in configuration mode is the quickest and easiest way to get started. In the default mode, the KSZ8795 acts as a stand-alone 4 port switch and one RGMII up-link. The user has to simply set the board’s configuration jumpers to the desired settings and apply power to the board. The user can also change jumper settings while power is applied to the board and press the convenient manual reset button for the new settings to take effect. Note that even if there is no external strap in values are set, internal pull up and pull down resistors will set the KSZ8795 default configuration. Section 4.1.1 covers each jumper on the board and describes its function.The KSZ8795 will start automatically after power up or reset.4.2 Feature Setting JumpersThe evaluation board provides jumpers to allow the user to easily set strap in configurations for the KSZ8795. Tables below describe the jumpers and their functions in the open or closed state.Table 1 General Setting JumpersTable 2 Power Setting Jumpers4.3 SPI ModeFrom SPI interface to the KSZ8795, use a USB to SPI converter that allows accessing all of the KSZ8795 features and registers. The user can easily access the SPI interface using a computer connected to the evaluation board’s USB port interface. Micrel provides a Windows GUI based program for the user to evaluate the KSZ8795’s full feature set. KSZ8795’s SP I interface will be able to access all static MAC table, the VLAN table, dynamic MAC address table, the MIB counters and all enhanced features.To prepare the KSZ8795CLXD-EVAL board for SPI mode configuration follow these steps:1. Copy the Micrel provided SPI interface software on your computer.2. KSZ8795-POE-EVAL board is fixed at SPI slave mode.3.Connect the computer’s USB port to the KSZ8795CLXD-EVAL board with a USB port cable.4.Connect the 12V DC power supply to J7 of the KSZ8795-POE-EVAL board.5.Open the Windows and navigate to the directory where the Window SPI file is stored. Click itsicon to invoke the software.6.Program the desired settings using the Micrel SPI interface software. See the softwareoperation description section for details.4.4 10/100 Ethernet PortsThere are five 10/100 Ethernet ports on the KSZ8795-POE-EVAL board. The ports J1, J2, J3 and J4 are the standard RJ45 connectors and using CAT-5 cables. Each port can be used as either an uplink or downlink. All ports support Auto-MDI/MDIX, so there is no need for cross over cables. J1 = RJ45 connector for port 1J2 = RJ45 connector for port 2J3 = RJ45 connector for port 3J4 = RJ45 connector for port 4JM1, JM2, JM3, JM4 and JS1, JS2, JS3, JS4 special connectors for Automotive used only.4.4 10/100/1000 Gigabit PortsThere is one KSZ9031RNX with 10/100/1000 Ethernet ports on the KSZ8795-POE-EVAL board. The ports RJ1 is the standard RJ45 connectors for port 5 and can connect to one Gigabit port of a processor platform by using CAT-5 cables. The port supports Auto-MDI/MDIX, so there is no need for the cross over cables.RJ1 = RJ45 connector for port 54.5 LED indicatorsEthernet Port LEDsThere are four columns of LED indicators on the board, one column for each of the four ports. The LED indicators are programmable to two different modes. You can program the LED mode through Register 11 bits [5:4]. The mode definitions are shown in Table below. There are two LEDs per port. The naming convention is “LEDx_y”, where “x” is the port number, and “y” is the number of the LED for that port.Table 3 LED ModesLED1_y are assigned to port 1LED2_y are assigned to port 2LED3_y are assigned to port 3LED4_y are assigned to port 4Gigabit Port LEDThe board also has a Gigabit port LED D3 to indicate the link-up speed for port 5.Green Color: 1G LinkRed Color: 100M LinkOrange Color: 10M LinkPower LEDThe board also has a power LED D7 for the 3.3V power supply. D7 LED indicates Power on and off.5.0 Software Tools Description5.1 Introducing Application Software ToolsThe Design Kit provides some software tools to support SPI access for all registers andMDC/MDIO access for MIIM registers. The installation file is located folders in the software tool directory within subdirectory of Window SPI_MDIO_Tools, this file name is MicrelSwitchPhyTool_x.xx.msi.5.2 Window Driver Installation FirstBefore use the Window based application software tool, the support drivers need to be installed to PC/Laptop first and this installation is just one times only. When connect one standard USB cable with type A and type B connectors between the evaluation board and PC computer first time, the Found New Hardware Wizard window will pop-up and then follow the instructions step by step as below.. Choose ‘No, not this time’ radio button and click the ‘Next’ button.Choose the ‘Install from a list or specific location (Advanced)’ radio button and click the ‘Next’ button.Click the ‘Include this location in the search’ check box, and use ‘Browse’ button to select the‘C:\MicrelEthernetChipConfig\D2XXDriver\CDM 2.02.04 WHQL Certified’ directory and click the ‘Next’ button. The window will install the drivers from this location.Click ‘Finish’ button. The Window will install another driver called ‘USB Serial Converter B’. After the drivers installed, Window Device Manager will show ‘USB Serial Converter A’ and ‘USB Serial Converter B’ as below figure. That means the installation successful.5.3 Installation Application Software ToolsIn the Design Kit, the installation file is located folders in the software tool directory within subdirectory of Window SPI_MDIO_Tools, this file name is MicrelSwitchPhyTool_x.xx.msi. Double click this file name, an installation Window will pop-up and then follow the instructions step by step as below.In this pop-up Window, this application software tools can be assigned to default Micrel directory in above window shown or is assigned to a specified folder what you want. Click ‘Next’ button, next Window will pop-up as below.Click ‘Next’ button to start the installation.Click ‘Close’ button to finish the installation. All application software tools are installed into the default Micrel directory or assigned directory in installation as below.5.4 DOS SPI ToolThis is a simple and powerful tool to access all register. The tool located in the default or assigned folder in the installation. There is an USBSPI.exe file which can be executed directly by clicking its icon. Before run the software tool, the SPI jumper setting should follows Table 5 in 4.3 SPI mode section and USB cable is plugged in both KSZ8795-POE-EVAL board and PC/Laptop. After click its icon, a DOS Window will pop up as follow:T ype a ‘help’ and press Enter, all commands will display as follows,For Read or Write registers, reg is the offset address of the register, value is Hex number.The ‘run file’ command can execute multiple commands by a script file, the script file is a .txt file which can be created by any edit tools.run xxxx.txt //will run the .txt script file.5.5 Window SPI Software ToolThis is a powerful tool to access all register. The tool located in the default or assigned folder in the installation. There is a MicrelSwitchConfigApp.exe file which can be executed directly by clicking its icon.Before run the software tool, the SPI jumper setting should follows Table 5 in 4.3 SPI mode section and USB cable should be plugged in both KSZ8795CLXD-EVAL board and PC/Laptop. After click its icon, a GUI Window will pop up as follow:The default is SPI interface to do switch configuration. From the device selection window to select any devices then press ‘Continue’ button or click ‘Continue’ button directly, the software tool can detect devices automatically. A control Window will be pop up as follow.All register can be read/ written in the window.The control Window includes all application registers, static MAC table, VLAN table, dynamic table and MIB counters that are supported by SPI. The software can save and open the configuration file as a back-up.5.6 LinkMD Software ToolThis is a simple and powerful tool to test Micrel LinkMD feature. The tool is in the installation folder. There is a LinkMDUSB.exe file which can be executed directly by clicking its icon.After click the icon of this executed file, a GUI Window will pop up as follow:Select one part and clik ‘Next’ button, using SPI interface and clik ‘Next’ button again, pop up a test windown as below:An example for CAT-5 cable diagnostic with open on port 1, just clic k ‘TEST’ button, a test result shows as below.The test result shows both MDIX mode for pair 3-6 and MDI mode for 1-2 pair. The detail LinkMD diagnostic testing configuration is described in the datasheet.6.0 Reference DocumentsKSZ8795CLX Data Sheets (Contact Micrel for Latest Datasheet), KSZ8795 Design Package includes all design information as a Design kit. The Design Kit will be found on Micrel website (Contact Micrel for the updates).7.0 Bill of MaterialPlease see the detail BOMs in the BOM folder of the hardware design package for theKSZ8795-POE-EVAL Boards.8.0 SchematicsPlease see the schematics of the evaluation board and reference design in the schematicsfolder of the hardware design package (Design kit) for the KSZ8795-POE-EVAL Board. Magnetics Vendors:See the datasheets for the recommendation.MICREL, INC. 1849 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http:/ The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to thecustomer.Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a signi ficant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damagesresulting from such use or sale.© 2015 Micrel, Incorporated.。
borcade交换机配置管理
与交换机交互，可以使用三种方式：串口以太网口光纤口缺省的串口参数是：9600，N，8，1缺省IP访问方式是：IP地址：10.77.77.77用户名：admin 密码：password时区：Pacific time 交换机名称：switch可使用ipAddrSet命令来重新设置交换机的IP地址。
在2000和3000系列交换机之中，只能同时支持一个Telnet进程。
Brocade的交换机可以使用命令行和图形界面方式进行管理。
代表性的CLI方法代表性的如：Telnet,HyperTerm 和tip。
对于Fabric OS v4.1，SSH v2可以被使用。
如果Brocade Secure Fabric OS被设置有效，CLI 接口必须是Brocade Secure Telnet.Brocade API v2.1提供给用户扩展访问到交换机的方法；可以轻松的整合Brocade SAN Fabric 的智能到已经存在的管理应用中，或者快速的开发用户SAN的特殊功能。
该工具包可以通过Brocade Connect 站点获得。
Brocade Fabric Manager v4.0 是一个实时管理多台Brocade 光纤交换机的很好的一个工具，它提供了有效的配置、监控、动态资源分配管理。
Brocade Web Tool是一个直观简单的管理小型SAN网络的管理工具。
运行支持JRE的Web Browser上。
Brocade 提供基于SNMP的MIBs用来在交换机上读和配置公共设置。
串口管理: n 一条串口连接电缆DB9 (female-to-female) n 使用超级终端或UNIX终端n Windows: Hyper Terminal n UNIX: tip u Microsoft Windows® 环境之中–传输速率:9600bit/sec –数据位: 8–校验位: None –停止位: 1 –流控制: None u UNIX® 环境下, 输入以下命令# tip /dev/ttyb–9600 u 安装步骤 1. 通过串口线将两者进行连接2. 确保交换机已经加电 3. 通过ipAddrSet命令设置IP地址(注意: 命令是大小写敏感，但是全大写或全小写也可。
中考数学二轮专题复习-矩形、菱形及正方形及答案详解
中考数学二轮专题复习-矩形、菱形及正方形一、单选题1．下列四边形中，对角线互相垂直平分的是（）A．平行四边形、菱形B．矩形、菱形C．矩形、正方形D．菱形、正方形2．下列测量方案中，能确定四边形门框为矩形的是（）A．测量对角线是否互相平分B．测量两组对边是否分别相等C．测量对角线是否相等D．测量对角线交点到四个顶点的距离是否都相等3．如图，菱形的对角线、相交于点，过点作于点，连接，若，，则菱形的面积为（）A．B．C．D．4．如图，有甲、乙、丙三个矩形，其中相似的是（）A．甲与丙B．甲与乙C．乙与丙D．三个矩形都不相似5．如图，在菱形ABCD中，DE⊥AB，cosA＝，AE＝3，则tan∠DBE的值是（）A．B．2C．D．6．如图，在菱形ABCD中，对角线AC与BD交于点O，E是边AB的中点，连结OE.若菱形ABCD的面积为24，AC＝8，则OE的长为（）A．B．3C．D．57．如图，在正方形ABCD中，E是边BC上一点，且BE：CE＝1：3，DE交AC于点F，若DE＝10，则CF等于()A．B．C．D．8．如图，矩形中，对角线交于点O，，则矩形的面积是（）A．2B．C．D．89．如图，将长、宽分别为6cm，cm的长方形纸片分别沿AB，AC折叠，点M，N恰好重合于点P．若∠α＝60°，则折叠后的图案（阴影部分）面积为（）A．cm2 B．（36）cm2C．cm2D．cm210．如图所示，反比例函数的图象经过矩形OABC的边AB的中点，则矩形OABC的面积为（）A．2B．4C．5D．811．如图，在菱形ABCD中，AB=4，∠B=60°，AE⊥BC，AF⊥CD ，垂足分别为点E，F，连结EF，则△AEF 的面积是（）A．B．C．D．12．如图，四边形ABCD是正方形，BE⊥EF，DF⊥EF，BE=2.5dm，DF=4dm，那么EF的长为（）A．6.5dm B．6dm C．5.5dm D．4dm13．将一矩形纸片ABCD沿CE折叠，B点恰好落在AD边上的F处，若，则的值为（）A．B．C．D．14．正方形ABCD的边长为8，M在DC上，且DM＝2，N是AC上的一动点，DN＋MN的最小值为（）A．6B．8C．10D．915．如图，在矩形ABCD中，对角线、BD交于C，，垂足为E，，那么的面积是（）A．B．C．D．16．如图，在Rt△ABC中，∠ACB＝90°，以其三边为边向外作正方形，过点C作CI⊥HJ于点I，交AB于K，在图形的外部作矩形MNPQ，使点D，E，G和H，J都落在矩形的边上.已知矩形BJIK的面积为1，正方形ACDE的面积为4，则为（）A．B．C．D．17．如图，正方形的边长为a，点E在边上运动（不与点A，B重合），，点F在射线上，且与相交于点G，连接．则下列结论：①，② 的周长为 ，③；④当 时，G 是线段 的中点，其中正确的结论是（ ）A ．①②③B ．①④C ．①③④D ．①②③④ 18．如图，菱形ABCD 的边长为4，E 、F 分别是AB 、AD 上的点，AC 与EF 相交于点G ，若， ，则FG 的长为（ ）A ．B ．2C ．3D ．419．如图，在△ABC 中，∠ACB ＝90°，以△ABC 的各边为边分别作正方形BAHI ，正方形BCFG 与正方形CADE ，延长BG ，FG 分别交AD ，DE 于点K ，J ，连结DH ，IJ.图中两块阴影部分面积分别记为S 1，S 2.若S 1：S 2＝1：4，S 四边形边BAHE ＝18，则四边形MBNJ 的面积为（ ）A．5B．6C．8D．920．如图，在Rt△ABC中，∠CBA＝60°，斜边AB＝10，分别以△ABC的三边长为边在AB上方作正方形，S1，S2，S3，S4，S5分别表示对应阴影部分的面积，则S1+S2+S3+S4+S5＝（）A．50B．50C．100D．100二、填空题21．在四边形ABCD中，对角线AC，BD交于点O，OA=OC=OB=OD，添加一个条件使四边形ABCD是正方形，那么所添加的条件可以是(写出一个即可)22．如图，分别以Rt△ABC三边构造三个正方形，面积分别为S1，S2，S3，若S1=15，S3=39，则S2=.23．如图，在平面直角坐标系中，点A1（1，0）、A2（3，0）、A3（6，0）、A4（10，0）、……，以A1A2为对角线作第一个正方形A1C1A2B1，以A2A3为对角线作第二个正方形A2C2A3B2，以A3A4，为对角线作第三个正方形A3C3A4B3，……，顶点B1，B2，B3……都在第一象限，按照此规律依次下去，则点Bn的坐标为.24．如图，菱形ABCD的对角线，BD相交于点，，，以AB为直径作一个半圆，则图中阴影部分的面积为.25．如图，在矩形ABCD中，AB＝8，AD＝10，AD，AB，BC分别与⊙O相切于E，F，G三点，过D作⊙O的切线交BC于点M，切点为N，则DM的长为.26．建党100周年主题活动中，702班浔浔设计了如图1的“红色徽章”其设计原理是：如图2，在边长为的正方形四周分别放置四个边长为的小正方形，构造了一个大正方形，并画出阴影部分图形，形成了“红色徽章”的图标.现将阴影部分图形面积记作，每一个边长为的小正方形面积记作，若，则的值是.27．如图，正方形ABCD的边长为4，P是边CD上的一动点，EF⊥BP交BP于G，且EF平分正方形ABCD的面积，则线段GC的最小值是.28．正方形ABCD的边长为4，点E是BC边上的一动点，连结AE，过点B作BF⊥AE于点F，以BF为边作正方形FBHG，当点E从B运动到C时，求CF的最短距离为；线段HG扫过的面积为29．如图，在矩形ABCD中，AB＝4，BC＝3，将△BCD沿射线BD平移长度a（a＞0）得到△B'C'D'，连接AB'，AD'，则当△AB'D'是直角三角形时，a的长为.30．如图，矩形ABCD中，AB＝20，AD＝15，P，Q分别是AB，AD边上的动点，PQ＝16，以PQ 为直径的⊙O与BD交于点M，N，则MN的最大值为．三、计算题31．如图，在中，，D为的中点，，，连接交于点O.（1）证明：四边形为菱形；（2）若，，求菱形的高.32．如图，已知在矩形ABCD中，AB=6，BC=2，点E，F分别在边CD，AB上，且DE=BF.（1）求证:四边形AFCE是平行四边形；（2）若□AFCE是菱形，求菱形AFCE的边长.四、解答题33．如图，在四边形ABCD中，E，F，G，H分别是AB，BD，CD，AC的中点，AD＝BC，求证：四边形EFGH是菱形．34．如图，矩形ABCD中，BC=4，将矩形ABCD绕点C顺时针旋转得到矩形A′B′C′D′，此时点B′恰好落在边AD上．连接B′B，若∠AB′B=75°，求旋转角及AB长．35．如图，△ABC中，点D是边AC的中点，过D作直线PQ∥BC，∠BCA的平分线交直线PQ于点E，点G是△ABC的边BC延长线上的点，∠ACG的平分线交直线PQ于点F．求证：四边形AECF是矩形．36．在几何探究问题中，经常需要通过作辅助线（如，连接两点，过某点作垂线，作延长线，作平行线等等）把分散的条件相对集中，以达到解决问题的目的.（1）（探究发现）如图1，点E，F分别在正方形ABCD的边BC，CD上，，连接EF.通过探究，可发现BE，EF，DF之间的数量关系为（直接写出结果）.（2）（验证猜想）同学们讨论得出下列三种证明思路（如图1）：思路一：过点A作，交CD的延长线于点G.思路二：过点A作，并截取，连接DG.思路三：延长CD至点G，使，连接AG.请选择你喜欢的一种思路证明（探究发现）中的结论.（3）（迁移应用）如图2，点E，F分别在正方形ABCD的边BC，CD上，且，，设，试用含的代数式表示DF的长.37．在平面直角坐标系中，O为原点，点A（6，0），点B在y轴的正半轴上，∠ABO＝30°．矩形CODE的顶点D，E，C分别在OA，AB，OB上，OD＝2．（Ⅰ）如图①，求点E的坐标；（Ⅱ）将矩形CODE沿x轴向右平移，得到矩形C′O′D′E′，点C，O，D，E的对应点分别为C′，O′，D′，E′．设OO′＝t，矩形C′O′D′E′与△ABO重叠部分的面积为S．①如图②，当矩形C′O′D′E′与△ABO重叠部分为五边形时，C′E′，E′D′分别与AB相交于点M，F，试用含有t的式子表示S，并直接写出t的取值范围；②当≤S≤5 时，求t的取值范围（直接写出结果即可）．38．阅读下面的例题及点拨，并解决问题：例题：如图①，在等边中，是边上一点(不含端点)，是的外角的平分线上一点，且.求证：.点拨：如图②，作，与的延长线相交于点，得等边，连接.易证：，可得；又，则，可得；由，进一步可得又因为，所以，即：.问题：如图③，在正方形中，是边上一点(不含端点)，是正方形的外角的平分线上一点，且.求证：.五、综合题39．将绕点A按逆时针方向旋转度，并使各边长变为原来的n倍，得，如图①，我们将这种变换记为.（1）如图①，对作变换得，则；直线与直线所夹的锐角为度；（2）如图②，中，，对作变换得，使点B、C、在同一直线上，且四边形为矩形，求和n的值；（3）如图③，中，，对作变换得，使点B、C、在同一直线上，且四边形为平行四边形，求和n的值. 40．如图（1）如图1，正方形ABCD与调研直角△AEF有公共顶点A，∠EAF＝90°，连接BE、DF，将△AEF绕点A旋转，在旋转过程中，直线BE、DF相交所成的角为β，则＝；β＝；（2）如图2，矩形ABCD与Rt△AEF有公共顶点A，∠EAF＝90°，且AD＝2AB，AF＝2AE，连接BE、DF，将Rt△AEF绕点A旋转，在旋转过程中，直线BE、DF相交所成的角为β，请求出的值及β的度数，并结合图2进行说明；（3）若平行四边形ABCD与△AEF有公共项点A，且∠BAD＝∠EAF＝α(0°＜α＜180°)，AD＝kAB，AF＝kAE(k≠0)，将△AEF绕点A旋转，在旋转过程中，直线BE、DF相交所成的锐角的度数为β，则：①＝；②请直接写出α和β之间的关系式．答案解析部分【解析】【解答】解：∵平行四边形对角线互相平分，菱形对角线互相垂直平分，矩形对角线互相平分且相等，正方形对角线互相垂直平分且相等，∴A、B、C不符合题意，D符合题意.故答案为：D.【分析】根据平行四边形对角线互相平分，菱形对角线互相垂直平分，矩形对角线互相平分且相等，正方形对角线互相垂直平分且相等，即可得出答案.【解析】【解答】解：A、∵对角线互相平分的四边形是平行四边形，而对角线互相平分且相等的四边形才是矩形，∴选项A不符合题意；B、∵两组对边分别相等是平行四边形，∴选项B不符合题意；C、∵对角线互相平分且相等的四边形才是矩形，∴对角线相等的四边形不是矩形，∴选项C不符合题意；D、∵对角线交点到四个顶点的距离都相等，∴对角线互相平分且相等，∵对角线互相平分且相等的四边形是矩形，∴选项D符合题意.故答案为：D.【分析】利用对角线互相平分且相等的四边形是矩形，可作出判断.【解析】【解答】解：∵四边形ABCD是菱形，∴OA=OC，OB=OD，AC⊥BD，∵DH⊥AB，∴∠BHD=90°，∴BD=2OH，∵OH=2，∴BD=4，∵OA=3，∴AC=6，∴菱形ABCD的面积．故答案为：A．【分析】根据菱形的性质和直角三角形斜边上的中线定理求出对角线的长即可求出菱形的面积。
斐雪派克 嵌入式烤箱 OB60SC5CEX型 OB60SC7CEX型 用户指南说明书
嵌入式烤箱OB60SC5CEX型OB60SC7CEX 型用户指南CN目录安全警告2简介 11首次使用12控制面板13设置时钟14使用定时器16烹饪指南18烤箱功能20烹饪数据表24自动烹饪30保养和清洁34故障排除48保修和维修50重要！妥善保存本说明书本用户指南所述的型号并非在所有市场上销售，随时会有变动。
如要详细了解本国/本地区销售的型号和规格，请访问我们的网站，或者联系当地的斐雪派克经销商。
1烤箱经过精心设计，在正常烹饪过程中可安全运行。
在使用烤箱时，请牢记下列安全原则：2345重要安全须知为了降低火灾、触电、人身伤害或财物损失风险，请在使用烤箱之前仔细阅读下列重要安全须知：• 在使用烤箱之前通读说明书。
烤箱仅用于本说明书所述的指定用途。
• 正确安装：确保让资深技术员正确安装烤箱并接地。
• 隔离开关：确保烤箱连接装有隔离开关的供电线路，隔离开关在必要时把电源隔离开。
• 如果电源线破损，为了避免危险，必须请制造商、服务代理商或其他资深电工更换电源线。
• 不得让儿童玩弄家用电器。
6• 必须看护好儿童。
不应让儿童单独留在烤箱安装区域无人看护。
切勿让他们坐在或站在烤箱上。
• 必须让8岁以下儿童远离烤箱，除非始终有人看护他们。
8岁以上儿童和有肢体、感官或精神障碍或缺乏经验知识的人士不应使用烤箱，除非有成人监督他们，或者向他们解释清楚使用说明，且他们了解了可能会发生的危险情况。
除非有成人监督，否则不得让儿童清洁和维护烤箱。
• 切勿把重物放在烤箱门上。
• 穿着合适的服装。
在使用烤箱时，切勿穿戴松垂饰物或宽松衣服。
如果松垂饰物或宽松衣服接触加热管或热表面，可能会起火燃烧或熔化，你可能会被烧伤。
7• 用户维修：除非本手册有建议，否则切勿修理或更换烤箱的任何部件。
应该请资深技术员进行其他所有维修。
• 油脂起火燃烧时切勿用水浇。
盖住明火或火焰即可灭火，或者用干粉灭火器或泡沫灭火器灭火。
• 只使用干隔热手套或隔热垫。
LucidShape CAA V5 基于 CATIA V5 环境的自动车灯设计解决方案说明书
PRODUCT FEATURES LucidShape CAA V5 Based offers the industry’s only complete design andvisualization workflow solution for automotive lighting design within theCATIA V5 environment. The product's fast, accurate modeling and analysis ofpart-level models and product-level assemblies have been enhanced with thefollowing major new features.Powerful Design ToolsGeometry creation tools that give users the freedom to focus on overall designobjectives rather than the implementation details of complex optics havealways made LucidShape unique. These tools are now available to CATIA usersin the new LucidShape CAA Design Module. Tools like MacroFocal designfeatures help designers rapidly conceptualize and design freeform reflectorsand lenses that meet photometric and aesthetic requirements for cutting-edgeautomotive lighting products.Stunning Photorealistic RenderingsPhotorealistic visualization is used in the creative process to evaluate theaesthetics of a lighting design, and in the engineering process to evaluateoptical feasibility based on uniformity, brightness, and manufacturability. Thenew LucidShape CAA Visualize Module generates stunning, physics-basedphotorealistic images. Features like the Environment Light Source and theHuman Eye Vision Image tool augment the realism in a scene and enabledesigners to virtually evaluate how the human eye will perceive a headlight, taillight, or signal light.Ease of Use ImprovementsEase-of-use improvements in the LucidShape CAA Base Module include theCATIA Design Table feature that allows users to construct and simulate designvariations quickly. It also streamlines the creation of multiple design forms fora product line.Improved Design-for-Manufacturability for Light GuidesThe Light Guide Design Module provides designers with the capability toefficiently create light guides with fillets that conform to manufacturingconstraints. Designers can create light guide designs faster, optimize lightdistributions and uniformity, and achieve better as-built performance.©2020 Synopsys, Inc. All rights reserved. Synopsys is a trademark of Synopsys, Inc. in the United States and other countries. A list of Synopsys trademarks isavailable at /copyright.html . All other names mentioned herein are trademarks or registered trademarks of their respective owners.06/03/20.CS275679033_LS CAA V5 Based V2019.06 Final.For more information, please contact Synopsys’ Optical Solutions Group at (626) 795-9101, visit /optical-solutions/lucidshape/caa-v5-based.html , or send an e-mail to *******************.。
Q-SYS NC Series Cameras 2 Hardware User Manual
TD-001654-01-A*TD-001654-01*ePTZ NC-110PTZ NC-12x80PTZNC-20x60 Hardware User ManualQ-SYS NC Series CamerasEXPLANATION OF TERMS AND SYMBOLSThe term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed, the result may be bodily injury or death.The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in damage to the equipment that may not be covered under the warranty.The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.The term "NOTE" is used to indicate additional useful information.The intent of the lightning flash with an arrowhead symbol within an equilateral triangle is to alert the user to the presence of un-insulated "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety,operating, and maintenance instructions in this manual.IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Install in accordance with the manufacturer's instructions.6. Refer all servicing to qualified service personnel.7. Adhere to all applicable local codes.Maintenance and RepairsWARNING!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid the danger of subsequent damage to the apparatus, injuries to persons, and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm, or related damages arising from any failure of the customer, owner, or user of the apparatus to facilitate those repairs. FCC StatementNote: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.Expected Product Life Cycle: 10 years, Storage Temperature range: –-20°C to +60°C, Relative Humidity: range of 5 —85% RH non-condensing.WarrantyFor a copy of the QSC Limited Warranty, visit the QSC, LLC., website at .RoHS StatementThe QSC Q-SYS NC Series: NC-110, NC-12x80, and NC-20x60 are in compliance with European Directive 2015/863/EU – Restriction of Hazardous Substances (RoHS2).What's in the BoxNC-12x80, NC-20x60 PTZ CamerasNC-110 ePTZ CameraIntroductionThe QSC Q-SYS™ NC Series comprises three camera models: NC-12x80, NC-20x60, and NC-110. These cameras send IP streams across a Q-LAN network to certain Q-SYS Core processors and peripherals, which bridge this IP signal to a USB signal for host computers to use in software applications.Connections and Controls (NC-12x80 and NC-20x60 PTZ) Front Panel1. Status LED (Green)• Off indicates the camera is in standby mode; network streams are off.• On indicates the camera is streaming video over the network.• Blinking indicates the ID mode is on.2. Power LED (Blue)• On indicates the camera has power applied.• Off indicates the camera has no power applied.Connections and Controls (NC-12x80 and NC-20x60 PTZ) (continued)Rear Panel56781. Product Label• Identifies product model: NC-12x80 or NC-20x60• Identifies the product serial number • Identifies the product MAC address2. ID Button: Press to identify this product in Q-SYS Designer Software and Q-SYS Configurator. The green STATUS LED on the frontpanel blinks when in ID mode. Press again to turn off.3. Factory Reset pin-hole: Use a paperclip or similarly sized object to insert. Press and hold the reset button for 5 seconds. This resetsall parameters to the factory defaults.4. Kensington™ Lock Slot: for use with a security cable (not supplied).5. DC 12 V: Connect an external power supply (not included). Supply must be rated at 12VDC 1A, EIAJ-04, center pin positive,outside barrel negative. Use only a class 2/LPS power supply.6. LAN/PoE: RJ-45 connector for Q-SYS Gigabit Ethernet and Power over Ethernet. Cat5e cabling or better required.7. 3G-SDI: 3G-SDI output via various video formats. Video formats can be changed via Q-SYS Designer Software or a Q-SYS UserControl Interface (UCI). Maximum video format is 1080p60.8. HDMI: HDMI® 1.4b output via various video formats. Video formats can be changed via Q-SYS Designer Software or a Q-SYSUCI. Maximum video format is 4K30. Note: NC Series PTZ Cameras support the usage of either HDMI or SDI, but not both simultaneously.Installation — NC-12x80 & NC-20x60 PTZInstall the Wall Mount Bracket1. Select a location on the wall or other vertical surface where the camera is tobe mounted. Make sure the surface is strong enough to hold the weight of the camera and bracket.2. Use the short side (1) of the bracket as a template to mark the location of thefour mounting holes (2) onto the wall.3. If the camera cables are installed inside the wall, run the cables through thelarge hole (3) in the short side of the bracket.4. Using appropriate screws (4), as necessary, attach the bracket to the wall.Tighten the attaching hardware. (Screws not supplied.)Bottom plate of Camera Mount the Camera on the Wall Bracket1. Align hole A on the bottom of the camera with the alignment pin A on thewall bracket. Place the camera onto the bracket so the alignment pin isinserted into the alignment hole on the camera and the rubber feet (C) on the bottom of the camera are inserted into the two slots (C).2. Install the larger screw (B) up through the wall bracket into the threaded holeon the bottom of the camera. Use a Phillips screwdriver to loosely tighten the screw.3. Install three smaller screws D, E, and F up through the wall bracket into thebottom of the camera. Tighten the screws using a Phillips screwdriver. 4. Tighten the larger screw installed earlier.5. If the camera cables are not installed in the wall, run the cables up throughthe oval hole (5) in the longer part of the bracket.6. Attach the cables to the appropriate connectors on the back of the cameraper installation requirements.7. Secure the cables to the bracket so that there is no strain placed on theconnectors.Connections and Controls (NC-110 ePTZ)Front Panel1. LED• Blinking Green: ID Mode• Solid Blue: Power On; Not Streaming• Solid Green: Streaming• Off: Camera is in Privacy Mode2. Included Camera Mount: This product can be configured for monitor-mounting or surface-mounting.3. Surface Mounting Screw Holes4. Universal Mounting Adapter: This can be used when connecting the NC-110 to a different mount.Rear Panel1. Factory Reset Pinhole: Use a paperclip or similarly sized object to insert. Press and hold the reset button for 5 seconds. This resetsall parameters to the factory defaults.2. ID Button: Press to identify this product in Q-SYS Designer and Configurator. The STATUS LED on the front panel blinks green whenin ID mode. Press again to turn off.3. LAN/PoE: RJ-45 connector for Q-SYS Gigabit Ethernet and Power over Ethernet. Cat5e cabling or better required.Installation (NC-110 ePTZ)Mounting Above a MonitorBend the bracket at the indicated pivot points shown to allow the optimal fit to the selected monitor. Mounting to a WallUsing the Existing Bracket for a Third-Party Mount1/4-20 UNC ThreadAttach the third-party mount to one of the 1 /4 -20 mounting holes on the included bracket. Removing the Existing Bracket for a Third-Party Mount1. On the bottom side of the camera, remove the two screws on the bracket.Remove 2 x Screws2.Slide the bracket off the camera.3. Mount the camera to the third-party mount.// DO NOT REMOVE \\Screws in block or camera1/4-20 UNC ThreadUse on various camera mounting bracketsInstalling Privacy Cover1. Peel adhesive.2. Center and attach to top of camera.3. Press firmly to affix adhesive.Dimension Drawings NC-12x80 & NC-20x60 PTZPTZ With Lens CapNC-110 ePTZQSC Self Help PortalRead knowledge base articles and discussions, download software and firmware, view product documents and training videos, and create support cases.https:///selfhelpportal/s/Customer SupportRefer to the Contact Us page on the QSC website for Technical Support and Customer Care, including their phone numbers and hours of operation.https:///contact-us/© 2021 QSC, LLC. All rights reserved. QSC, the QSC logo, Q-SYS, and the Q-SYS logo are registered trademarks of QSC, LLC, in the U.S. Patent and Trademark office and other countries. Q-LAN and Q-SYS Designer are trademarks of QSC, LLC. Patents may apply or be pending.All other trademarks are the property of their respective owners.。
W5500中文版数据手册V1.3
2 主机接口.....................................................................8 2.1 SPI 工作模式 .............................................................9 2.2 SPI 数据帧 ...............................................................2 2.2.1 地址段 ............................................................2 2.2.2 控制段 ............................................................3 2.2.3 数据段 ............................................................5 2.3 可变数据长度模式（VDM）Variable Length Data Mode (VDM).....................2 2.3.1 写访问—VDM 模式 ...................................................2 2.3.2 读访问—VDM 模式 ...................................................2 2.4 固定数据长度模式（FDM）Fixed Length Data Mode (FDM) .......................2 2.4.1 写访问—FDM 模式 Write Access in FDM ................................2 2.4.2 读访问—FDM 模式 Read Access in FDM .................................2
华为云引擎S5336-S系列交换机产品概述说明书
BrochureProduct OverviewCloudEngine S5336-S series switches are developed based on next-generation high-performing hardware and the Huawei Versatile Routing Platform (VRP). CloudEngine S5336-S switches support simplified operations and maintenance (O&M), and flexible Ethernet networking. It also provides enhanced Layer 3 features and mature IPv6 features. CloudEngine S5336-S switches can be used in various scenarios. For example, it can be used as an access or aggregation switch on a campus network or as an access switch for Metropolitan Area Network.Models and AppearancesThe following models are available in the CloudEngine S5336-S series.Models and appearances of the CloudEngine S5336-S seriesModels and Appearances DescriptionCloudEngine S5336-S48S4X-A ⚫48 x GE SFP ports(optional RTU upgrade to 10G), 4 x 10 GE SFP+ ports ⚫Built-in AC power⚫Forwarding performance: 480 Mpps⚫Switching capacity: 2.72 Tbps⚫220mm deep chassis, front accessCloudEngine S5336-S48S4X-D ⚫48 x GE SFP ports(optional RTU upgrade to 10G), 4 x 10 GE SFP+ ports ⚫Built-in DC power⚫Forwarding performance: 480 Mpps⚫Switching capacity: 2.72 Tbps⚫220mm deep chassis, front accessCloudEngine S5336-S24S4X-A ⚫24 x GE SFP ports(optional RTU upgrade to 10G, optional RTU upgrade to 48 ports), 4 x 10 GE SFP+ ports⚫Built-in AC power⚫Forwarding performance: 480 Mpps⚫Switching capacity: 2.72 Tbps⚫220mm deep chassis, front accessModels and Appearances DescriptionCloudEngine S5336-S24S4X-D ⚫24 x GE SFP ports(optional RTU upgrade to 10G, optional RTU upgrade to 48 ports), 4 x 10 GE SFP+ ports⚫Built-in DC power⚫Forwarding performance: 480 Mpps⚫Switching capacity: 2.72 Tbps⚫220mm deep chassis, front accessFeatures and HighlightsPowerful Service Processing Capability⚫CloudEngine S5336-S supports a broad set of Layer 2/Layer 3 multicast protocols, such as PIM SM, PIM DM, PIM SSM, MLD, and IGMP snooping. This capability is ideal for high-definition video surveillance and video conferencing access.⚫CloudEngine S5336-S provides multiple Layer 3 features including OSPF, IS-IS, BGP, and VRRP, meeting enterprises' access and aggregation service needs and enabling a variety of voice, video, and data applications.Multiple Security Control Mechanisms⚫CloudEngine S5336-S supports MAC address authentication, 802.1X authentication, and Portal authentication, and implements dynamic delivery of policies (VLAN, QoS, and ACL) to users.⚫CloudEngine S5336-S provides a series of mechanisms to defend against DoS attacks and user-targeted attacks. DoS attacks are targeted at switches and include SYN flood, Land, Smurf, and ICMP flood attacks. User-targeted attacks include bogus DHCP server attacks, IP/MAC address spoofing, DHCP request flood, and changing of the DHCP CHADDR value.⚫CloudEngine S5336-S sets up and maintains a DHCP snooping binding table, and discards the packets that do not match the table entries. The DHCP snooping trusted port feature ensures that users connect only to the authorized DHCP server.⚫CloudEngine S5336-S supports strict ARP learning, which protects a network against ARP spoofing attacks to ensure that users can connect to the Internet normally.Multiple Reliability Mechanisms⚫In addition to supporting traditional Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), and Multiple Spanning Tree Protocol (MSTP), CloudEngine S5336-S is also designed with Huawei-developed Smart Ethernet Protection (SEP) technology and the industry's latest Ethernet Ring Protection Switching (ERPS) technology. SEP is a ring protection protocol specific to the Ethernet link layer, and applies to various ring network topologies, such as open ring topology, closed ring topology, and cascading ring topology. This protocol is reliable, easy to maintain, and implements fast protection switching within 50 ms. ERPS is defined in ITU-T G.8032, and it implements millisecond-level protection switching based on traditional Ethernet MAC and bridging functions.⚫CloudEngine S5336-S supports Smart Link, which implements backup of uplinks. One CloudEngine S5336-S switch can connect to multiple aggregation switches through multiple links, significantly improving reliability of access devices.⚫CloudEngine S5336-S supports Ethernet OAM (IEEE 802.3ah/802.1ag) to fast-detect link faults.Easy Network deployment⚫CloudEngine S5336-S supports Super Virtual Fabric (SVF), which innovatively virtualizes the "core/aggregation switch + access switch" into one logical device. This simplifies device management and achieves plug-and-play for access switches. In addition, CloudEngine S5336-S supports service configuration templates. The templates are configured on core devices and automatically delivered to access devices, enabling centralized control, simplified service configuration, and flexible configuration adjustment. CloudEngine S5336-S functions as a client in an SVF system.⚫CloudEngine S5336-S supports Huawei Easy Operation, a solution that provides zero-touch deployment, replacement of faulty devices without additional configuration, USB-based deployment, batch device configuration, and batch remote upgrade. The capabilities facilitate device deployment, upgrade, service provisioning, and other management and maintenance operations, and also greatly reduce O&M costs. CloudEngine S5336-S can be managed using SNMP v1/v2c/v3, CLI, web-based network management system, or SSH v2.0. Additionally, it supports RMON, multiple log hosts, port traffic statistics collection, and network quality analysis, which facilitate network optimization and reconstruction.Mature IPv6 Technologies⚫CloudEngine S5336-S uses the mature, stable VRP platform and supports IPv4/IPv6 dual stack, IPv6 RIPng, and IPv6 over IPv4 tunnels (including manual, 6-to-4, and ISATAP tunnels).⚫CloudEngine S5336-S can be deployed on a pure IPv4 network, a pure IPv6 network, or a shared IPv4/IPv6 network, helping achieve IPv4-to-IPv6 transition.Intelligent Stack (iStack)⚫CloudEngine S5336-S supports intelligent stack (iStack). This technology combines multiple switches into a logical switch. Member switches in a stack implement redundancy backup to improve device reliability and use inter-device link aggregation to improve link reliability.⚫iStack provides high network scalability. Y ou can increase ports, bandwidth, and processing capacity of a stack by simply adding member switches to the stack.⚫iStack also simplifies device configuration and management. After a stack is set up, multiple physical switches are virtualized into one logical device. Y ou can log in to any member switch in the stack to manage all the member switches in the stack.⚫CloudEngine S5336-S support stacking through fixed downlink/uplink ports.Intelligent O&M⚫CloudEngine S5336-S supports the Sampled Flow (sFlow) function. It uses a method defined in the sFlow standard to sample traffic passing through it and sends sampled traffic to the collector in real time. The collected traffic statistics are used to generate statistical reports, helping enterprises maintain their networks.⚫CloudEngine S5336-S provides telemetry technology to collect device data in real time and send the data to Huawei campus network analyzer CampusInsight. The CampusInsight analyzes network data based on the intelligent fault identification algorithm, accurately displays the real-time network status, effectively demarcates and locates faults in a timely manner, and identifies network problems that affect user experience, accurately guaranteeing user experience.⚫CloudEngine S5336-S supports a variety of intelligent O&M features for audio and video services, including the enhanced Media Delivery Index (eMDI). With this eDMI function, the switch can function as a monitored node to periodically conduct statistics and report audio and video service indicators to the iMaster NCE-CampusInsight platform. In this way, the CampusInsight platform can quickly demarcate audio and video service quality faults based on the results of multiple monitored nodes.Intelligent Upgrade⚫CloudEngine S5336-S supports the intelligent upgrade feature. Specifically, CloudEngine S5336-S obtains the version upgrade path and downloads the newest version for upgrade from the Huawei Online Upgrade Platform (HOUP). The entire upgrade process is highly automated and achieves one-click upgrade. In addition, preloading the version is supported, which greatly shortens the upgrade time and service interruption time.⚫The intelligent upgrade feature greatly simplifies device upgrade operations and makes it possible for the customer to upgrade the version independently. This greatly reduces the customer's maintenance costs. In addition, the upgrade policies on the HOUP platform standardize the upgrade operations, which greatly reduces the risk of upgrade failures.Cloud Management⚫The Huawei cloud management platform allows users to configure, monitor, and inspect switches on the cloud, reducing on-site deployment and O&M manpower costs and decreasing network OPEX. Huawei switches support both cloud management and on-premise management modes. These two management modes can be flexibly switched as required to achieve smooth evolution while maximizing return on investment (ROI).OPS(Open Programmability System)⚫CloudEngine S5336-S supports Open Programmability System (OPS), an open programmable system based on the Python language. IT administrators can program the O&M functions of a CloudEngine S5336-S switch through Python scripts to quickly innovate functions and implement intelligent O&M.Product SpecificationsItem CloudEngine S5336-S48S4X-A CloudEngine S5336-S48S4X-DCloudEngine S5336-S24S4X-ACloudEngine S5336-S24S4X-DFixed port 48 x GE SFPports(optional RTUupgrade to 10G), 4 x 10GE SFP+ ports 48 x GE SFPports(optional RTUupgrade to 10G), 4 x 10GE SFP+ ports48 x GE SFPports(optional RTUupgrade to 10G, optionalRTU upgrade to 48ports), 4 x 10 GE SFP+ports48 x GE SFPports(optional RTUupgrade to 10G, optionalRTU upgrade to 48ports), 4 x 10 GE SFP+portsDimensions (H x W x D) 43.6 mm x 442 mm x220 mm43.6 mm x 442 mm x220 mm43.6 mm x 442 mm x220 mm43.6 mm x 442 mm x220 mmChassis height 1 U 1 U 1 U 1 UChassis weight(includingpackaging)4.7kg 4.3kg 4.7kg 4.3kgPower supplytypeBuild-in AC power Build-in DC power Build-in AC power Build-in DC powerRated voltage range ⚫AC input : 100VAC～130V AC，200V AC～240VAC；50/60Hz⚫High-Voltage DCinput: -240V DC⚫DC input : -48 V DCto -60 V DC⚫AC input : 100VAC～130V AC，200V AC～240VAC；50/60Hz⚫High-Voltage DCinput: -240V DC⚫DC input : -48 V DCto -60 V DCMaximum voltage range ⚫AC input : 90 V ACto 290 V AC, 45 Hzto 65 Hz⚫High-Voltage DCinput: 190V DC～290V DC⚫DC input : -36 V DCto -72V DC⚫AC input : 90 V ACto 290 V AC, 45 Hzto 65 Hz⚫High-Voltage DCinput: 190V DC～290V DC⚫DC input : -36 V DCto -72V DCMaximum powerconsumption111W 108W 111W 108WNoise ⚫Under normaltemperature (soundpower): 56.8dB (A)⚫Under hightemperature (soundpower): 73.9dB (A)⚫Under normaltemperature (soundpressure): 44.8dB(A) ⚫Under normaltemperature (soundpower): 56.8dB (A)⚫Under hightemperature (soundpower): 73.9dB (A)⚫Under normaltemperature (soundpressure): 44.8dB(A)⚫Under normaltemperature (soundpower): 56.8dB (A)⚫Under hightemperature (soundpower): 73.9dB (A)⚫Under normaltemperature (soundpressure): 44.8dB(A)⚫Under normaltemperature (soundpower): 56.8dB (A)⚫Under hightemperature (soundpower): 73.9dB (A)⚫Under normaltemperature (soundpressure): 44.8dB(A)Long-term operating temperature ⚫0-1800 m altitude: -5°C to +45°C⚫1800-5000 maltitude: Theoperatingtemperature reducesby 1ºC every timethe altitude increasesby 220 m.⚫0-1800 m altitude: -5°C to +45°C⚫1800-5000 maltitude: Theoperatingtemperature reducesby 1ºC every timethe altitude increasesby 220 m.⚫0-1800 m altitude: -5°C to +45°C⚫1800-5000 maltitude: Theoperatingtemperature reducesby 1ºC every timethe altitudeincreases by 220 m.⚫0-1800 m altitude: -5°C to +45°C⚫1800-5000 maltitude: Theoperatingtemperature reducesby 1ºC every timethe altitudeincreases by 220 m.Item CloudEngine S5336-S48S4X-A CloudEngine S5336-S48S4X-DCloudEngine S5336-S24S4X-ACloudEngine S5336-S24S4X-DShort-termoperatingtemperature-5℃～50℃-5℃～50℃-5℃～50℃-5℃～50℃Storagetemperature-40°C to +70°C -40°C to +70°C -40°C to +70°C -40°C to +70°CRelative humidity 5% to 95% (non-condensing) 5% to 95% (non-condensing)5% to 95% (non-condensing)5% to 95% (non-condensing)Surge protection specification (power port) ⚫AC power port: ±6kV in differentialmode, ±6 kV incommon mode⚫DC power port: ±2kV in differentialmode, ±4 kV incommon mode⚫AC power port: ±6kV in differentialmode, ±6 kV incommon mode⚫DC power port: ±2kV in differentialmode, ±4 kV incommon modeHeat dissipation Air-cooled heatdissipation andintelligent speedadjustment Air-cooled heatdissipation andintelligent speedadjustmentAir-cooled heatdissipation andintelligent speedadjustmentAir-cooled heatdissipation andintelligent speedadjustmentService Features Item DescriptionMAC address table IEEE 802.1d complianceMAC address learning and agingStatic, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addressesVLAN 4K VLANsGuest VLAN and voice VLANGVRPMUX VLANVLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports1: 1 and N: 1 VLAN mappingReliability RRPP ring topology and RRPP multi-instanceSmart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchoverSEPSTP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)ERPS (G.8032)BPDU protection, root protection, and loop protectionIP routing Static route, RIPv1/v2, RIPng, OSPF, OSPFv3, ECMP, IS-IS, IS-ISv6, BGP, BGP4+, VRRP, and VRRP6 IPv6 features NDPath MTU (PMTU)IPv6 ping, IPv6 tracert, and IPv6 Telnet6to4 tunnel, ISATAP tunnel, and manually configured tunnelMulticast PIM DM, PIM SM, PIM SSMIGMP v1/v2/v3, IGMP v1/v2/v3 snooping and IGMP fast leaveMLD v1/v2 and MLD v1/v2 snoopingMulticast forwarding in a VLAN and multicast replication between VLANsMulticast load balancing among member ports of a trunkControllable multicastPort-based multicast traffic statisticsQoS/ACL Rate limiting on packets sent and received by a portPacket redirectionPort-based traffic policing and two-rate three-color CAREight queues on each portWRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithmsRe-marking of the 802.1p priority and DSCP priorityPacket filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address,destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocoltype, and VLAN IDRate limiting in each queue and traffic shaping on portsSecurity Hierarchical user management and password protectionDoS attack defense, ARP attack defense, and ICMP attack defenseBinding of the IP address, MAC address, port number, and VLAN IDPort isolation, port security, and sticky MACMFFBlackhole MAC address entriesLimit on the number of learned MAC addressesIEEE 802.1x authentication and limit on the number of users on a portAAA authentication, RADIUS authentication, HWTACACS authentication, and NACSSH v2.0HTTPSCPU defenseBlacklist and whitelistIEEE 802.1x authentication, MAC address authentication, and Portal authenticationDHCPv4/v6 client/relay/server/snoopingAttack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packetsSupports separation between user authentication and policy enforcement pointsIPSecVxLAN* VXLAN L2 and L3 gatewaysCentralized and distributed gatewayBGP-EVPNConfigured through the NETCONF protocolSVF Plug-and-play SVF clientAutomatically loading the system software packages and patches of SVF clientsAutomatically delivering service configurations in a one-click mannerIndependent running of SVF clientsOAM Software OAMEFM OAMCFM OAMY.1731 performance testManagement and maintenance iStackCloud management based on Netconf/Yang Virtual cable testSNMP v1/v2c/v3RMONWeb-based NMSSystem logs and alarms of different levels 802.3az EEEsFlowInteroperability Supports VBST (Compatible with PVST/PVST+/RPVST)Supports LNP (Similar to DTP)Supports VCMP (Similar to VTP)*Hardware readyNetworking and ApplicationsLarge-Scale Enterprise Campus NetworkCloudEngine S5336-S series switches can be deployed at the access layer of a campus network to build a high-performance and highly reliable enterprise network.Small- or Medium-scale Enterprise Campus NetworkCloudEngine S5336-S series switches can be deployed at the aggregation layer of a campus network to build a high-performance, multi-service, and highly reliable enterprise network.Small-scale Enterprise Campus NetworkWith powerful aggregation and routing capabilities of CloudEngine S5336-S series switches make them suitable for use as core switches in a small-scale enterprise network. Two or more S5336-S switches use iStack technology to ensure high reliability. They provide a variety of access control policies to achieve centralized management and simplify configuration.Application on a MANCloudEngine S5336-S series switches can be deployed at the access layer of a MAN(Metropolitan Area Network) to build a high-performance, multi-service, and highly reliable ISP MAN network.Application in Public CloudCloudCampus Solution is a network solution suite based on Huawei public cloud. CloudEngine S5336-S series switches can be located at the access layer.The switches are plug-and-play. They go online automatically after being powered on and connected with network cables, without the need for complex configurations. The switches can connect to the management and control system (iMaster NCE-Campus for switches running V200R020C00 and later versions), and use bidirectional certificate authentication to ensuremanagement channel security. The switches provide the NETCONF and Y ANG interfaces, through which the management and control system delivers configurations to them. In addition, remote maintenance and fault diagnosis can be performed on the management and control system.Ordering InformationThe following table lists ordering information of the CloudEngine S5336-S series switches.Model Product DescriptionCloudEngineS5336-S48S4X-A CloudEngine S5336-S48S4X-A base (48*GE SFP ports, optional RTU upgrade to 10G, 4*10GE SFP+ ports, AC power supply, front access)CloudEngineS5336-S48S4X-D CloudEngine S5336-S48S4X-D base (48*GE SFP ports, optional RTU upgrade to 10G, 4*10GE SFP+ ports, DC power supply, front access)CloudEngineS5336-S24S4X-A CloudEngine S5336-S24S4X-A base (24*GE SFP ports, optional RTU upgrade to 10G, optional RTU upgrade to 48 ports, 4*10GE SFP+ ports, AC power supply, front access)CloudEngineS5336-S24S4X-D CloudEngine S5336-S24S4X-D base (24*GE SFP ports, optional RTU upgrade to 10G, optional RTU upgrade to 48 ports, 4*10GE SFP+ ports, DC power supply, front access)S53S-M-Lic S53XX-S Series Basic SW,Per DeviceMore InformationFor more information about Huawei Campus Switches, visit or contact us in the following ways:Copyright © Huawei Technologies Co., Ltd. 2021. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Huawei Technologies Co., Ltd.Trademarks and Permissionsand other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders.NoticeThe purchased products, services and features are stipulated by the contract made between Huawei and thecustomer. All or part of the products, services and features described in this document may not be within thepurchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd.Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of ChinaWebsite:CloudEngine S5736-S Series Switches。
Creo 3.0 ECAD-MCAD协同操作指南20190319
CREO3.0 ECAD-MCAD 协同操作指南
帮助文档
2019-3-19
0
Creo 3.0 ECAD-MCAD 协同操作指南
目录
1 ECAD 概述....................................................................................................................... 1
2.2.1 关于所有 ECAD 设计的设置 ................................................................ 1
2.2.2 关于设置快速导入的默认值 ................................................................... 3
3.1
关于设计过程中的 Creo Parametric ECAD ................................................. 16
3.2
建议的设计顺序 ............................................................................................. 17
2.4
ECAD 装配的设置 ........................................................................................ 11
2.4.1 关于 ECAD 装配的设置 ...................................................................... 11
杰拉克 Yealink SIP-T33G 入门级IP电话说明书
SIP-T33GEntry-level IP Phone with 4 Lines & Color LCDAn entry-level color screen IP phone with high performance, Y ealink SIP-T33G offers support for 4 lines and includes local 5-way conferencing. For its fashionable appearance as well as an extra-large 320x240-pixel color display with backlight, it brings comfortable operation experience and clear visual experience for users. Designed with a new powerful chip, it helps greatly improved work efficiency. Additional features include a dual-port Gigabit Ethernet with integrated PoE, EHS35 support for Y ealink wireless headset, and adjustable multi-angle stand support. These features allow the SIP-T33G to be a high-quality but cost-effective classic IP phone that maximizes productivity in both small and large office environments.Key Features and BenefitsStronger Performance, More PossibilitiesEquipped with powerful chip, the T3 series owns a stronger computing ability and more upgraded functions, which ensures a higher productivity and smoother office experience. Due to great performance, T3 series is capable to extend more services for different business demands.Superior HD Audio, Better CommunicationThe Y ealink T3 series provides distraction-free communications with industry leading Smart Noise Filtering Technology, which delivers excellent sound quality without extraneous noises and allows fluent conversations.Classic Design, Practical DetailsDesigned by Y ealink original team, T3 series inherits the design concept of Y ealink IP phone family. The advanced design including modern appearances and ergonomic details enables easier and friendly operation experience to users.All in One Platform, Convenient ManagementProven reliability and integrations for Y ealink Device Management Platform, installed the unified firmware, T3 series is simple to deploy and manage, which allows a significant reduction in the operation and maintenance cost.• Y ealink HD Voice• 2.4” 320 x 240-pixel color display with back-light• Dual-port Gigabit Ethernet• PoE support • Opus codec support • Up to 4 SIP accounts • Local 5-way conferencing• Support EHS Wireless Headset • Unified Firmware • Support YDMP/YMCS • Stand with 2 adjustable angles •Wall mountableUnified FirmwareColor ScreenElegantIndustrial DesignEHSDevice ManagementHDOpus5-wayConferencingYEALINK NETWORK TECHNOLOGY CO., LTD.Email:********************:SpecificationsPC Connection Power Adapter (DC 5V)Learn MoreT o find out how Y ealinksolutionscanhelpyourorganization,*************************************************.Email:********************:About YealinkY ealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to worldwide enterprises. Focusing on research and development, Y ealink also insists on innovation and creation. With the outstanding technical patents of cloud computing, audio, video and image processing technology, Y ealink has built up a panoramic collaboration solution of audio and video conferencing by merging its cloud services with a series of endpoints products. As one of the best providers in more than 140 countries and regions including the US, the UK and Australia, Y ealink ranks No.1 in the global market share of SIP phone shipments.CopyrightCopyright © 2020 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD.Copyright © 2020 Y ealink(Xiamen) Network T echnology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, photocopying, recording, or otherwise, for any purpose, without the express written permission of Y ealink(Xiamen) Network T echnology CO., LTD.Technical SupportVisit Y ealink WIKI (/) for firmware downloads, product documents, FAQ, and more. For better service, we sincerely recommend you to use Y ealink Ticketing system (https://) to submit all your technical issues.YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.Web: Addr: No.1 Ling-Xia North Road, High Tech Park,Huli District, Xiamen, Fujian, P .R.CCopyright©2020 Y ealink Inc. All right reserved.。
SINUMERIK SINUMERIK 840D sl 前置操作面板：OP 015A 设备手册 06
1.4 1.4.1 1.4.1.1 1.4.1.2 1.4.1.3 1.4.1.4 1.4.2 1.4.2.1 1.4.2.2 1.4.2.3 1.4.2.4 1.4.2.5 1.4.2.6 1.4.2.7 1.4.2.8 1.4.2.9 1.4.2.10
联网................................................................................................................................40 系统设置.........................................................................................................................40 采用 SINUMERIK solution line 时的设置........................................................................40 设备网络中的系统启动....................................................................................................42 精简型客户端单元（TCU）............................................................................................43 出厂预设置......................................................................................................................44 调试 TCU........................................................................................................................46 操作 TCU 主菜单............................................................................................................46 操作其他 TCU 菜单.........................................................................................................49 在设备网络中注册 TCU..................................................................................................61 校准触摸面板..................................................................................................................64 连接 SIMATIC Thin Client 触摸面板...............................................................................66 配置 SIMATIC Thin Client 触摸面板...............................................................................67 文件“config.ini”中的设置...............................................................................................69 文件“tcu.ini”中的设置....................................................................................................72 采用 TCU 时的置换机制.................................................................................................79 通过 PLC 禁止 TCU 之间的切换.....................................................................................81
海视达DS-2SE7C144IW-AE(32x 4)(S5) 4 MP 32 × IR网络速度球机说
DS-2SE7C144IW-AE(32x/4)(S5)4 MP 32× IR Network Speed DomeHikvision DS-2SE7C144IW-AE(32x/4)(S5) 4 MP 32 × IR Network Speed Dome adopts 1/2.8" progressive scan CMOS chip. With the 32 × optical zoom lens, the camera offers more details over expansive areas. This series of cameras can be widely used for wide ranges of high-definition, such as rivers, roads, railways, airports, squares, parks, scenic spots, and venues, etc.Empowered by deep learning algorithms, Hikvision AcuSense technology brings human and vehicle targets classification alarms to front- and back-end devices. The system focuses on human and vehicle targets, vastly improving alarm efficiency and effectiveness. ⏹1/2.8" progressive scan CMOS⏹High quality imaging with 4 MP resolution⏹Excellent low-light performance withpowered-by-DarkFighter technology⏹Secures an expansive area with 32× optical zoom and 16× digital zoom⏹Supports WDR, HLC, BLC, 3D DNR, defog, regional exposure, regional focus, rapid focus⏹Expansive night view with up to 200 m IR distance⏹Supports 24 VAC & Hi-PoE⏹Supports audio visual alarm. The white flashing light and audible warning can be triggered by certain events, and the warning content is selectable⏹DORIThe DORI (detect, observe, recognize, identify) distance gives the general idea of the camera ability to distinguish persons or objects within its field of view. It is calculated based on the camera sensor specification and the criteria given by EN 62676-4: 2015.DORI Detect Observe Recognize IdentifyDefinition25 px/m63 px/m125 px/m250 px/m Distance (Tele)3060.0 m (10039.4 ft)1214.3 m (3983.9 ft)612.0 m (2007.9 ft)306.0 m (1004.0 ft)⏹SpecificationCamera ModuleImage Sensor [Panoramic channel]: 1/2.8" progressive scan CMOS; [PTZ channel]: 1/2.8" progressive scan CMOSMin. Illumination [Panoramic channel]: 0.005 Lux @ (F1.6, AGC ON), 0 Lux with IR;[PTZ channel]: Color: 0.005 Lux @ (F1.5, AGC ON), B/W: 0.001 Lux @ (F1.5, AGC ON), 0 Lux with IRShutter Speed 1 s to 1/30,000 sSlow Shutter yesFocus semi-auto, manual, autoDay & Night ICRDay/Night Switch day, night, auto, scheduled-switchBLC yesWDR 120 dB WDRHLC yes3D DNR yesDefog yesEIS yesRegional Exposure yesRegional Focus yesImage Settings saturation, brightness, contrast, sharpnessImage Parameters Switch [Panoramic channel]: yes; [PTZ channel]: yesWhite Balance auto, ATW, sodium lamp, fluorescent lamp, indoor, outdoor, MWB, locked WB Digital Zoom 16×Optical Zoom 32×Privacy Mask polygon region, mosaic mask, mask color configurable, [Panoramic channel] 8 masks, [PTZ channel] 24 masksSNR >52dBGeneral Function mirror, password protection, watermark, IP address filterLensFocal Length [Panoramic channel]: 4 mm; [PTZ channel]: 5.9 to 188.8 mm, 32 × optical Zoom Speed [PTZ channel]: approx. 5.6 sFOV [Panoramic channel]: Horizontal field of view: 79°, Vertical field of view: 42.4°; [PTZ channel]: Horizontal field of view: 60.2° to 2.3° (wide-tele)Aperture [Panoramic channel]: F1.6; [PTZ channel]: F1.5PTZMovement Range (Pan) 360°Movement Range (Tilt) -15° to 90° (auto flip)Pan Speed pan speed: configurable from 0.1° to 160°/s; preset speed: 240°/s Tilt Speed tilt speed: configurable from 0.1° to 120°/s, preset speed 200°/s Proportional Zoom yesPresets 300Patrol Scan 8 patrols, up to 32 presets for each patrolPattern Scan 4 pattern scansPower-off Memory yesPark Action preset, pattern scan, patrol scan, auto scan, tilt scan, random scan, frame scan, panorama scan3D Positioning yes PTZ Status Display yes Preset Freezing yesScheduled Task preset, pattern scan, patrol scan, auto scan, tilt scan, random scan, frame scan, panorama scan, dome reboot, dome adjust, aux outputException Detection IP address conflict, HDD full, illegal login, HDD error, network disconnected VideoMax. Resolution [Panoramic channel]: 2560 × 1440; [PTZ channel]: 2560 × 1440Stream Type main stream, sub-stream, third streamMain Stream [Panoramic channel]:50 Hz: 25 fps (2560 × 1440, 1920 × 1080, 1280 × 960, 1280 × 720) 60 Hz: 30 fps (2560 × 1440, 1920 × 1080, 1280 × 960, 1280 × 720) [PTZ channel]:50 Hz: 25 fps (2560 × 1440, 1920 × 1080, 1280 × 960, 1280 × 720) 60 Hz: 30 fps (2560 × 1440, 1920 × 1080, 1280 × 960, 1280 × 720)Sub-Stream [Panoramic channel]:50 Hz: 25 fps (704 × 576, 640 × 480, 352 × 288) 60 Hz: 30 fps (704 × 480, 640 × 480, 352 × 240) [PTZ channel]:50 Hz: 25 fps (704 × 576, 640 × 480, 352 × 288) 60 Hz: 30 fps (704 × 480, 640 × 480, 352 × 240)Third Stream [Panoramic channel]:50 Hz: 25 fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 576, 640 × 480, 352 × 288) 60 Hz: 30 fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 480, 640 × 480, 352 × 240) [PTZ channel]:50 Hz: 25 fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 576, 640 × 480, 352 × 288) 60 Hz: 30 fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 480, 640 × 480, 352 × 240)Video Compression H.265, H.264, MJPEGVideo Bit Rate 32 kbps to 16384 kbpsH.264 Type baseline profile, main profile, high profile H.265 Type main profileH.264+ yesH.265+ yesSVC yesROI dynamic target tracking, main stream, sub-stream and third stream respectively support eight fixed areasAudioAudio Compression G.711alaw, G.711ulaw, G.722.1, G.726, MP2L2, PCM, AACAudio Bit rate MP2L2: 32 kbps, 40 kbps, 48 kbps, 56 kbps, 64 kbps, 80 kbps, 96 kbps, 112 kbps, 128 kbps, 144 kbps, 160 kbps, 192 kbpsAudio Sampling Rate MP2L2: 16 kHz, 32 kHz, 48 kHz, PCM: 8 kHz, 16 kHz, 32 kHz, 48 kHz Environment Noise Filtering yesSmart FeaturesFace Capture Support detecting up to 5 faces at the same time. Support detecting, tracking, capturing, grading, selecting of face in motion, and output the best face picture of the faceBasic Event motion detection,alarm input,alarm output,video tampering alarm,exceptionSmart Event intrusion detection, line crossing detection, region entrance detection, region exiting detection, audio exception detectionSmart Tracking manual tracking, panorama tracking, event tracking, auto-tracking, tracking takeover Smart Record ANR, Dual-VCAAlarm Linkage preset, patrol scan, pattern scan, memory card video recording, alarm output, sending email, notify surveillance center, upload to FTP, smart tracking, audible warning, white light flashingWarning and Alert white light and audible warningPerimeter Protection Line crossing, intrusion, region entrance, region exitingSupport alarm triggering by specified target types (human and vehicle)NetworkNetwork Storage NAS (NFS, SMB/ CIFS), ANRProtocols IPv4/IPv6, HTTP, HTTPS, 802.1x, QoS, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP/IP, UDP, IGMP, ICMP, DHCP, PPPoE, Bonjour, Websocket, WebsocketsAPI Open-ended API, Open Network Video Interface (Profile S, Profile G), ISAPI, Hikvision SDK, Third-party management platform, ISUPSimultaneous Live View 20 User/Host 32Security Measures Authenticated username and password, MAC address binding, HTTPS encryption, 802.1X authenticated access, IP address filterClient iVMS-4200, Hik-Connect, HikCentralWeb Browser IE 10+, Chrome 57+, Firefox 52+, Safari 12+InterfaceCommunication Interface RJ45, self-adaptive 10M/100M Ethernet portOn-board Storage Built-in memory card slot, support Micro SD/Micro SDHC/Micro SDXC, up to 256 GB Alarm Input 2 alarm inputsAlarm Output 1 alarm outputAudio Input 1 audio input, 2.0 to 2.4Vp-p, 1k Ohm±10%Audio Output 1 audio output, line level, impedance: 600 ΩSupplement LightIR Distance [PTZ channel]: up to 200 m; [Panoramic channel]: up to 30 mVisual Alarm 30 mGeneral Power24 VAC, Hi-PoEPower Consumption and Current Max. 42 W, including max. 2.6 W for heater and max. 11 W for supplement lightOperating Conditions -30°C to 65°C (-22°F to 149°F), humidity lower than 90%RH Reset yesDemist Demist by heating the glass Material ADC12Dimensions Ø220 mm × 382.1 mm (Ø 8.7" × 15.0") Weight Approx. 6 kg (13.23 lb.)Approval ProtectionIP66 Standard, IK10 (excluding glass window), 6000 V Lightning Protection, Surge Protection and Voltage Transient Protection⏹Typical ApplicationHikvision products are classified into three levels according to their anti-corrosion performance. Refer to the following description to choose for your using environment.This model has NO SPECIFIC PROTECTION.LevelDescriptionTop-level protectionHikvision products at this level are equipped for use in areas where professional anti-corrosion protection is a must. Typical application scenarios include coastlines, docks, chemical plants, and more.Moderate protectionHikvision products at this level are equipped for use in areas with moderate anti-corrosion demands. Typical application scenarios include coastal areas about 2 kilometers (1.24 miles) away from coastlines, as well as areas affected by acid rain.No specific protectionHikvision products at this level are equipped for use in areas where no specific anti-corrosion protection is needed.⏹Available ModelDS-2SE7C144IW-AE(32X/4) (S5)Dimension⏹Accessory ⏹OptionalDS-1602ZJ Wall mountDS-1661ZJPendant MountDS-1602ZJ-PoleVertical polemountDS-1602ZJ-CornerCorner mountDS-1681ZJ-2InstallationAdapterDS-2681ZJ Cardan Joint。
H3C、锐捷路由参数
6VPE（IPv6 MPLS L3VPN）
NATPT
静态路由
动态路由协议：RIPng，OSPFv3，IS-ISv6，BGP4+
IPv6组播协议：MLDv1/v2、PIM6-DM、PIM6-SM、PIM6-SSM
16端口10M/100M以太网二层交换FIC接口模块(POE)
RT-DFIC-24FSW
24端口10M/100M及2端口1000BASE-T/1000BASE-X(COMBO)以太网2层交换FIC接口模块
RT-DFIC-24FSW-POE
24端口10M/100M及2端口1000BASE-T/1000BASE-X(COMBO)以太网2层交换FIC接口模块(POE)
RT-FIC-4FXO
4端口FXO语音模块
RT-FIC-2EM
2路语音处理板E&M中继接口模块
RT-FIC-4EM
4路语音处理板E&M中继接口模块
RT-FIC-HNDE
高性能网络数据加密处理模块
RT-FIC-OAP(512M/256M/80G)
开方式业务平台模块（512M内存/256M CF卡/80G硬盘）
端口隔离
DLDP/LLDP
Layer2 protocol tunnel（BPDU tunnel）
GARP/GVRP
STP/RSTP/MSTP
IEEE802.3ad LACP二层聚合
广播风暴抑制
端口镜像
IP服务
TCP、UDP、IP Option、IP unnumber
策略路由
Siemens SIRIUS 软启动器3RW50产品说明书
3RW5076-6AB14
SIRIUS soft starter 200-480 V 470 A, 110-250 V AC Screw terminals Analog output
product brand name product category product designation product type designation manufacturer's article number
● of standard HMI module usable ● of high feature HMI module usable ● of communication module PROFINET standard usable ● of communication module PROFIBUS usable ● of communication module Modbus TCP usable ● of communication module Modbus RTU usable ● of communication module Ethernet/IP ● of circuit breaker usable at 400 V ● of circuit breaker usable at 500 V ● of the gG fuse usable up to 690 V ● of full range R fuse link for semiconductor protection usable up to 690 V ● of back-up R fuse link for semiconductor protection usable up to 690 V ● of line contactor usable up to 480 V ● of line contactor usable up to 690 V General technical data starting voltage [%] stopping voltage [%] start-up ramp time of soft starter ramp-down time of soft starter current limiting value [%] adjustable accuracy class acc. to IEC 61557-12 certificate of suitability ● CE marking ● UL approval ● CSA approval product component ● HMI-High Feature ● is supported HMI-Standard ● is supported HMI-High Feature product feature integrated bypass contact system number of controlled phases
LTE题库(含答案)全
LTE题库（含答案）全1、关于LTE需求下列说法中正确的是（D）A、下行峰值数据速率100Mbps（20MHz，2天线接收）B、U-plane时延为5msC、不支持离散的频谱分配D、支持不同大小的频段分配 2、下列哪个网元属于E-UTRAN（B） A、S-GWB、E-NodeBC、MMED、EPC 3、SC-FDMA与OFDM相比，（D ）A、能够提高频谱效率B、能够简化系统实现C、没区别D、能够降低峰均比4、LTE下行没有采用哪项多天线技术？（D）A、SFBCB、FSTDC、波束赋形D、TSTD5、下列选项中哪个不属于网络规划：(D)A、链路预算B、PCI规划C、容量估算D、选址6、容量估算与_____互相影响：（A）A.链路预算B.PCI规划C.建网成本D.网络优化7、LTE支持灵活的系统带宽配置，以下哪种带宽是LTE协议不支持的：（D）A.5MB.10MC.20MD.40M8、LTE为了解决深度覆盖的问题，以下哪些措施是不可取的：（A）A.增加LTE系统带宽；B.降低LTE工作频点，采用低频段组网；C.采用分层组网；D.采用家庭基站等新型设备；9、以下说法哪个是正确的：（D）A.LTE支持多种时隙配置，但目前只能采用2:2和3:1；B.LTE适合高速数据业务，不能支持VOIP业务；C.LTE在2.6GHz的路损与TD-SCDMA2GHz的路损相比要低，因此LTE更适合高频段组网；D.TD-LTE和TD-SCDMA共存不一定是共站址；10、LTE组网，可以采用同频也可以采用异频，以下哪项说法是错误的？（B）A.10M同频组网相对于3*10M异频组网可以更有效的利用资源，提升频谱效率；B.10M同频组网相对于3*10M异频组网可以提升边缘用户速率；C.10M同频组网相对于3*10M异频组网，小区间干扰更明显；D.10M同频组网相对于3*10M异频组网，算法复杂度要高；11、控制平面RRC协议数据的加解密和完整性保护功能，在LTE中交由（D）层完成。
X-DCS2000 EN文档说明书
X-DCS2000/ENDigital Integrated System ManagerŸEasy-access preset buttons ŸBuilt-in fault diagnosis ŸAutomatic volume control ŸPTT emergency microphoneŸExtendable zones connections via software ŸconfigurationHighly integratedFeaturesDCS has 8 dry-contact outputs that can be used to activate external devices. For example, DCS can connect with the volume controller via one of these outputs to conduct force cut-off function. It has 8 pairs of audio output where each one allows multiple 100V loudspeakers to be connected in parallel. A record output port is dedicated for external recording device.DCS also has 8 dry-contact inputs that can be linked with a fire alarm control center which supports broadcasting alarm tones and evacuation announcement when fire happens. On the rear panel, there are 1 network audio input and 4auxiliary inputs, which provide connections to external audio sources such as CD/DVD, cassette, FM tuner etc. In addition, there are 4 audio inputs that are capable to adjust volume automatically according to ambient noise (when HN-D32N Noise Detector is installed). Users can set the phantom INPUT/OUTPUTpower and input gain of each volume control input on the rear panel.DCS can connect with devices and the network to extend zone connections via 4 interchangeable 10M/100M adaptable Ethernet interfaces.DCS can detect errors on main power supply, backup power supply, amplifier circuit, amplifier protection, software, communications, and loudspeakers circuits in runtime. By locating the error's occurrence, DCS provides valuable information for repairing or replacing the malfunctioned devices.DCS supports power supply and amplifier redundancy. Built-in fuse provides over-current protection to the main power supply. When a short-circuit error is detected in DCS, the power supplied from main power will be cut off and switched to the backup one. Same technology is also used in amplifier switchover. User can configure the amplifier backup solution as 3 backup for 1 main, 2 backup for 1 main, 1 backup for 1 main or 2 backup for 2 main.CONNECTIONS EXPANSIONSAFETY AND ROBUSTNESSAUDIO STORAGE DCS is built with a 1GB flash memory. Via X-618 Config software, users can upload audio files for later playback or audio synthesis. DCS can automatically write work log and fault log and store X-DCS2000/EN Digital Integrated SystemManager (abbr. DCS) is the central unit of X-618 Public Address and Voice Alarm System. DCS integrates plentiful functions such as zoneexpansion, multiple audio sources support, audio file storage, net audio, broadcasting, zone control, monitoring, fault diagnosis etc. The supplied X-618 system management software allows users to easily and efficiently manage and configure DCS’s control settings.up to 10,000 entries for each.DCS supports a variable range of audio sources, such as audio files from external devices (CD/DVD, cassette, FM tuner and etc.), remote paging announcement or broadcasting fromX-NPMI, announcements from the supplied PTT emergency microphone etc.DCS can broadcast 4 audio message or internet audio simultaneously. Timer broadcast setting can be configured via software to allow system to play specific programs at a specific time even when it is not supervised. With the software, user can also handle up to 255 priorities to meet complex public address er can select audio sources and zones to broadcast by clicking directly on the control buttons on the front panel.DCS supports audio matrix, allowing any audio sources to be played in any zones.DCS has a built-in loudspeaker and it can enable zone and audio source monitoring. When the system has been extended via Ethernet, network remote supervision can be performed.A highlight of DCS is the one-click emergency mode switchover feature. A red emergency mode button can be found on the front panel, which can activate the fire alarm broadcast mode in an emergency by a single click. In emergency mode, the recorded evacuation announcement will be broadcasted and the zone alarm indicator lights will be turned on.This function significantly improves the evacuation efficiency.Users can preset the functions for the otherbuttons or their combo usage. The label describing buttons' functions can be replaced easily.BROADCASTINGZONE CONTROLMONITORINGSHORTCUT CONTROLCOMPONENTSINDICATORS INTERFACES ŸButtons for special operations: select all, reset, error confirm and etc.ŸZone selection buttonsŸAudio source selection buttons ŸEmergency mode buttonŸDevice status indicator lights can showwhether the device is powered, malfunctioned, disabled, running or delayed ŸZone status indicator lightsŸAudio source status indicator lightsŸ8 dry-contact outputsŸ8 loudspeaker line outputs Ÿ8 dry-contact inputs Ÿ 5 auxiliary inputsŸ 4 audio inputs with AVC Ÿ 4 noise detector inputs Ÿ 4 amplifier interfaces ŸRS - 485 port ŸMain power portŸBackup power port (DC 24V)Ÿ4 10/100M adaptable Ethernet interfacesCertification and StandardSafety Europe CE C omplied Voice AlarmEuropeEN 54 (Part 16) CompliedTechnical SpecificationsPower SupplyMain power supply~100 - 240 V,50/60 Hz Backup power supply DC 21.5 V - 28.5 V Main power fuse T2 AL 250 VMax. input power120 WRated power50 WAudio InputAuxiliary input 0 dBInput impedance20 kΩFrequency response60 Hz - 16 kHzPTT microphone input-51 dBSNR> 85 dBAudio OutputAudio output channels 4Output signal0 dBuRecord output0 dBuAVC InputChannels 4Input signal 50 dB / 0 dB, configured by switchInput impedance20 kΩPhantom power DC 24V,configured by switchFrequency response60 Hz - 16 kHz SNR> 65 dB Loudspeaker CircuitOutput channels 8, with circuit fault detection functionMax. output load 250 WTrigger Input / OutputTrigger input ports8Trigger output ports8 (NO, NC and COM) Max. working voltage AC 250 V / DC 30 V Max. working current 2.5 AOthersMonitoring loudspeaker10 W / 8 W Ethernet speed10 M / 100 M Ethernet interface number4Storage space 1 GBWork ConditionHumidity< 95 %, noncondensing Operating temperature-10 °C ~ +55 °C Storage temperature-40 °C ~ +70 °C SpecificationDimension (W×H×D)482 × 88× 420 mm Mount dimension (W×H×D) 580 × 235 × 552 mm Net weight9.3 kgGross weight12.5 kgParts IncludedX-DCS2000/EN 1Panel paper 6Dry-contact input connector (8P)2Dry-contact output connector (6P)4 Loudspeaker connector (16P) 2 Amplifier connector (4P) 2AVC connector (8P)2 Backup power supply connector(4P)1 Chassis4Net cable (8P ×2m)1Audio cable1AC power cord1Power interface kit1Fuse(2A)1 Warranty card1X-618 Digital Public Address / Voice Alarm System |X-DCS2000/EN Digital Integrated System Manager -- Page 3 / 4Ordering InformationX-DCS2000/EN Digital Integrated System Manager With PTT emergency microphoneX-DCS2000/ENX-618 Digital Public Address / Voice Alarm System | X-DCS2000/EN Digital Integrated System Manager -- Page 4 / 4Honeywell AudiovisualsNo. 257, Junye RoadGuangzhou GETDD East 510530 ChinaTel: +86 20 2839 9600Fax: +86 20 2820 1013702005_EN2.0Aug 2013© 2013 Honeywell International Inc.Quality certificate 1Product manual1Configuration Software (CD) 1PTT microphone1。
Leuze ODS 96 光学距离传感器说明书
Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0*************•W e r e s e r v e t h e r i g h t t o m a k e c h a n g e s • D S _O D S 96B M C V 6600_e n _50107945.f m●Reflection-independent distance information●Highly insensitive to extraneous light ●Analogue current or voltage output ●PC/OLED display and key pad for configuration●Measurement value is indicated in mm on OLED display●Measurement range and mode adjustable ●Teachable switching output and analogue output100…600mm18 - 30 VDCAccessories:(available separately)●Mounting systems●Cable with M12 connector (K-D …)●Configuration softwareDimensioned drawingA Indicator diode greenB Indicator diode yellowC TransmitterD ReceiverE Optical axisF Device plug M12x1G Countersinking for SK nut M5, 4.2mm deep H OLED display and key padI Reference edge for the measurement (cover glass)Electrical connectionODS 96BOptical distance sensorsODS 96B M/C6-600-S12 - 04ODS 96B M/V6-600-S12 - 04e n 04-2012/1150107945ODS 96B M/C6-600-S12 - 042012/11ODS 96B M/V6-600-S12 - 04SpecificationsOptical dataMeasurement range 1)1)Luminosity coefficient 6%…90%, complete measurement range, at 20°C, medium range of U B , measurement object ≥50x50mm²100…600mm Resolution 2)2)Minimum and maximum value depend on measurement distance0.1…0.5mm Light source LEDWavelength 880nm (infrared light)Light spotapprox. 15 x 15mm 2 at 600mm Error limits (relative to measurement distance)Absolute measurement accuracy 1)±1.5%Repeatability 3)3)Same object, identical environmental conditions, measurement object ≥50x50mm²±0.5%b/w detect. thresholds (6…90% rem.)≤1%Temperature compensationyes 4)4)Typ. ± 0.02 %/KTimingMeasurement time 1…51)ms Response time 1)≤15ms Delay before start-up ≤300msElectrical dataOperating voltage U B 18…30VDC (incl. residual ripple)Residual ripple≤15% of U B Open-circuit current ≤150mASwitching output push-pull switching output 5),PNP light switching, NPN dark switching 5)The push-pull switching outputs must not be connected in parallelSignal voltage high/low ≥(U B -2V)/≤2VAnalogue outputvoltage 1…10V, R L ≥2k Ω current 4…20mA, R L ≤500ΩIndicatorsteach-in on GNDteach-in on +U BGreen LED continuous lightready flashing fault teaching procedure offno voltageYellow LED continuous lightobject inside teach-in measurement distanceflashing teaching procedureoffobject outside teach-in measurement distanceMechanical dataMetal housingHousing diecast zinc Optics cover glassWeight 380g Connection type M12 connector Environmental dataAmbient temp. (operation/storage)-20°C …+50°C / -30°C …+70°C Protective circuit 6)6)1=transient protection, 2=polarity reversal protection, 3=short circuit protection for all outputs 1,2,3VDE safety class 7)7)Rating voltage 250VAC, with cover closedII, all-insulated Protection class IP 67, IP 69K 8)8)IP 69K test acc. to DIN 40050 part 9 simulated, high pressure cleaning conditions without the use of additives.Acids and bases are not part of the test.LED class1 (acc. to EN 60825-1)Standards appliedIEC 60947-5-2A Area not definedB Linearity not definedC Measurement rangeD Object presentE No object detected FMeasurement distanceOrder guideDesignationPart No.With M12 connector Current output ODS 96B M/C6-600-S1250106720Voltage outputODS 96B M/V6-600-S1250106721TablesDiagramsODS 96BRemarks●Measurement timedepends on the reflectivity of the measurement object and on the mea-surement mode.●Approved purpose : The ODS 96B distance sensors are optical elec-tronic sensors for the opti-cal, contactless measure-ment of distance to objects.。
Parker Pneumatic B Guided Cylinders产品说明书
• Low profile guided assembly • Powered by the P1D cylinder• Bore sizes 32, 40, 50, 63, 80 and 100mm • Strokes to any practical length • Rod lock options available• Composite and ball bearing options availableOrdering informationFor sensors see page B294.Metric (inch)Boresize A1A2B1B2B3B4ØB5B6B7B8ØC1std.ØC1O.S.C2C3ØD1ØD2ØD3ØD4ØD5ØD63250(1.97)97(3.82)45(1.77)92(3.62)78(3.07)32.5(1.28)31.5(1.24)4(0.16)12.7(0.50)61(2.40)12(0.47)16(0.63)73.5(2.89)50(1.97)6.6(0.26)11(0.43)5.2(0.20)9(0.35)M6 x1.004(0.16)4058(2.28)115(4.53)50.8(2.00)110(4.33)84(3.31)38(1.50)31.5(1.24)11(0.43)12.7(0.50)69(2.72)16(0.63)20(0.79)86.5(3.41)58(2.28)6.6(0.26)11(0.43)5.2(0.20)9(0.35)M6 x1.004(0.16)5070(2.76)137(5.39)63(2.48)132(5.20)100(3.94)46.5(1.83)50(1.97)19(0.75)16(0.63)85(3.35)20(0.79)25(0.98)103.5(4.07)70(2.76)9(0.35)14(0.55)6.4(0.25)11(0.43)M8 x1.254(0.16)6385(3.35)152(5.98)82.5(3.25)145(5.71)105(4.13)56.5(2.24)50(1.97)15(0.59)16(0.63)100(3.94)20(0.79)25(0.98)118.5(4.67)85(3.35)9(0.35)14(0.55)6.4(0.25)11(0.43)M8 x1.254(0.16)80105(4.13)189(7.44)100(3.94)180(7.09)130(5.12)72(2.83)76(2.99)21(0.83)19(0.75)130(5.12)25(0.98)30(1.18)147(5.79)105(4.13)11(0.43)17(0.67)8.4(0.33)14(0.55)M10 x1.506(0.24)100130(5.12)213(8.39)120(4.72)200(7.87)150(5.91)89(3.50)76(2.99)24.5(0.97)19(0.75)150(5.91)25(0.98)30(1.18)171.5(6.75)130(5.12)11(0.43)17(0.67)8.4(0.33)14(0.55)M10 x1.506(0.24)Boresize E1E2E3ØF1G1H1H2L1L2L3L4L5N1P1P2P3PortsizePistonrodthread3212(0.47)7(0.28)4(0.16)30(1.18)17(0.67)81(3.19)16(0.63)153(6.02)120(4.72)17(0.67)71(2.80)64.7(2.55)17(0.67)36(1.42)31(1.22)40(1.57)1/8M10 x1.254012(0.47)7(0.28)4(0.16)35(1.38)24(0.94)99(3.90)19(0.75)166(6.54)130(5.12)20(0.79)71(2.80)74.7(2.94)17(0.67)36(1.42)36(1.42)44(1.73)1/4M12 x1.255016(0.63)9(0.35)9(0.35)40(1.57)27(1.06)119(4.69)23(0.91)194(7.64)150(5.90)25(0.98)79(3.11)90(3.54)24(0.94)42(1.65)44(1.73)50(1.97)1/4M16 x1.56316(0.63)9(0.35)9(0.35)45(1.77)27(1.06)132(5.20)28(1.10)224(8.82)180(7.09)25(0.98)109(4.29)90(3.54)24(0.94)58(2.28)44(1.73)60(2.36)3/8M16 x1.58020(0.79)11(0.43)5(0.19)45(1.77)32(1.26)166(6.54)36(1.42)252(9.92)200(7.87)30(1.18)113(4.45)109(4.29)30(1.18)50(1.97)52(2.05)70(2.76)3/8M20 x1.510020(0.79)11(0.43)5(0.20)55(2.17)32(1.26)190(7.48)45(1.77)272(10.71)220(8.66)30(1.18)128(5.04)114(4.49)30(1.18)49(1.93)51(2.01)70(2.76)1/2M20 x1.5The following curves are based on 10 million cycles at aspeed of 0.20 m/s (40 fpm). Higher dynamic loads will reduce cycle life. For static conditions, multiply the information in the graphs by 1.5.EXAMPLE: A P5E with 40mm bore, composite bushings and a “stroke+d” of 400mm will have a load capacity of 48N.L o a d ,N (l b )800(180)600(135)400(90)200(45)032mm Bore SizeL o a d ,N(l b )200(45)150(34)100(22)50(11)040mm Bore SizeL o a d ,N (l b )400(90)300(67)200(45)100(22)00100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)0100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)The following curves are based on 10 million cycles at a speed of 0.20 m/s (40 fpm). Higher dynamic loads will reduce cycle life. For static conditions, multiply the information in the graphs by 1.5.EXAMPLE: A P5E with 63mm bore, oversized support shafts and a “stroke+d” of 300mm would have a loadcapacity of 200N.L o a d ,N (l b )800(180)600(135)400(90)200(45)032mm Bore Size100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)L o a d ,N (l b )200(45)150(34)100(22)50(11)050mm Bore Size100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)L o a d ,N (l b )300(67)250(56)200(45)150(34)100(22)040mm Bore Size100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke+ d,mm (inch)L o a d ,N (l b )400(90)300(67)200(45)100(22)00100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)63mm Bore SizeL o a d ,N (l b )400(90)300(67)200(45)100(22)080mm Bore Size100mm Bore Size100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)0100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke+d,mm (inch)L o a d ,N (l b )1000(225)800(180)600(135)400(90)200(45)050(11)Asymmetrical loading occurs when an off-center load is applied to the unit. P5E Series units can resist torsional loads that are asymmetrical.EXAMPLE: A P5E with 63mm bore, ball bearings and a “stroke + d” of 300mm would have an asymmetrical torque capacity of 5 Nm.T o r q u e ,N m (l b -i n )60(531)45(398)30(266)15(133)032mm Bore Size100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)T o r q u e ,N m (l b -i n )8(71)6(53)4(35)2(18)050mm Bore Size100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)T o r q u e ,N m (l b -i n )12(106)10(89)8(71)6(53)4(35)040mm Bore Size100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)T o r q u e ,N m (l b -i n )20(177)15(133)10(89)5(44)00100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)63mm Bore SizeT o r q u e ,N m (l b -i n )25(221)20(177)15(133)10(89)080mm Bore Size100mm Bore Size100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)0100(3.9)200(7.9)300(11.8)400(15.7)500(19.7)Stroke + d,mm (inch)T o r q u e ,N m (l b -i n )80(708)60(531)40(354)20(177)02(18)5(44)LoadAsymmetrical Torque CapacityP5E Series units mounted vertically will have the sameeccentric load capacity regardless of orientation. The graphs provide maximum load capacity for an eccentric mounted load. The load is assumed to be mounted at the face of the tooling plate.These load curves illustrate load ratings based on the bearing system of the product. Load rating is a key selection criterion but is not the only one to consider in the selection of a product.Note: Charts are based on 100mm of stroke.EXAMPLE: A P5E with a 40mm bore carrying an eccentric load located 300mm from the centerline has a capacity of approximately 200N (45 lbs).L o a d ,N (l b )1000(225)800(180)600(135)400(90)200(45)032mm Bore SizeL o a d ,N (l b )250(56)200(45)150(34)100(22)50(11)040mm Bore SizeL o a d ,N (l b )400(90)300(67)200(45)100(22)00150(5.9)450(17.7)300(11.8)600(23.6)750(29.5)Eccentricity,mm (inch)0150(5.9)450(17.7)300(11.8)600(23.6)750(29.5)Eccentricity,mm (inch)Vertical Eccentric Load Capacity。
用友U8数据库表名参照表
用友U8数据库表名参照表1 Accessaries 成套件表2 AccInformation 帐套参数表3 AdjustPVouch4 AdjustPVouchs5 Ap_AlarmSet 单位报警分类设置表6 Ap_BillAge 帐龄区间表7 Ap_Cancel 核销情况表8 Ap_CancelNo 生成自动序号9 Ap_CloseBill 收付款结算表10 Ap_CtrlCode 控制科目设置表11 Ap_Detail 应收/付明细帐12 Ap_DigSet13 AP_DispSet 查询显示列设置表14 Ap_InputCode 入帐科目表15 Ap_InvCode 存货科目设置表16 Ap_Lock 操作互斥表17 Ap_MidExch18 Ap_MyTableSet 查询条件存储表19 Ap_Note 票据登记簿20 Ap_Note_Sub 票据登记簿结算表21 Ap_SstyleCode 结算方式科目表22 Ap_Sum 应收/付总帐表23 Ap_Vouch 应付/收单主表24 Ap_Vouchs 应付/收单主表的关联表25 Ap_VouchType 单据类型表26 Ar_BadAge 坏帐计提帐龄期间表27 Ar_BadPara 坏帐计提参数表28 ArrivalVouch 到货单、质检单主表***29 ArrivalVouchs 到货单、质检单子表***30 AssemVouch 组装、拆卸、形态转换单主表31 AssemVouchs 组装、拆卸、形态转换单子表32 Bank 本企业开户银行及帐号33 CA_ACR 按产品产量约当分配率表34 CA_AllMt 分配率分配方法表35 CA_AmoCt 各项费用成本表36 CA_AsDIF 辅助部门内部固定分配率表37 CA_AssCW 辅助费用耗用表38 CA_AssMP 辅助部门计划单价表39 CA_AWPC 各项费用耗用计划表40 CA_Batchmx_temp41 CA_Batchmxhy_tmp42 CA_Batchmxhy_tmp143 CA_bmmx_tmp44 CA_CBSys 系统设置表45 CA_ClassDef 产品类别定义46 CA_ComPD 完工产品处理表47 CA_ComPS 完工产品统计表48 CA_Control CA_Control49 CA_CostCD 费用明细定义表50 CA_DaCPS 完工产品产量日报表51 CA_DaMBW 材料及外购半成品耗用日报表52 CA_DayTiS 工时日报表53 CA_Depcf 部门预测录入表54 CA_DepCs 折旧费用表55 CA_DepDf 部门属性表56 CA_DepFR 部门预测结果表57 CA_DepHC 部门历史成本表58 CA_DepPMA 部门计划人工费用率表59 CA_DirMA 直接人工费用表60 CA_DistrInput61 CA_DistrItem62 CA_EnMMC 月末部门共用材料盘点表63 CA_EnMOM 月末在产品原材料盘点表64 CA_EnMOP 月末在产品盘点表65 CA_IDMAC 记入直接材料费用的出库类别表66 CA_MaBSW 材料及外购半成品耗用表67 CA_ManCt 制造费用表68 CA_MAPC 人工费用人员类别表69 CA_MatDf 材料定义表70 CA_MenuDef71 CA_OnlIA 其它费用表72 CA_OnpB 在产品年初数表73 CA_OnPCE 在产品每月变动约当系数表74 CA_OnPQu 在产品约当系数表75 CA_OnpQuo 在产品定额表76 CA_PlanC 计划成本表77 CA_PPUDR 工序产品领用日报表78 CA_PreDf 工序定义表79 CA_ProCF 产品成本预测表80 CA_ProNb 产品批号表81 CA_ProPMA 工序计划人工费用率表82 CA_ProPt 工序产品属性表83 CA_ProPU 工序产品领用表84 CA_Quo 定额表85 CA_RptAdd 成本报表自定义加项86 CA_RptFld 成本报表自定义栏目表87 CA_RptHZBTmp88 CA_RptSub 成本报表自定义减项89 CA_RptSum 成本汇总表90 CA_RptSys 成本汇总报表系统备份91 CA_SAmoCt 服务项目费用成本表92 CA_SerPri 服务价格表93 CA_SPDf 结转凭证定义表94 CA_TimSt 工时统计表95 CA_UserProperty 操作员权限表96 CA_WasPR 废品回收表97 CheckVouch 盘点单主表98 CheckVouchs 盘点单子表99 Code 科目表100 ColumnSet101 CostJustVouch 计划价/售价调整主表102 CostJustVouchs 计划价/售价调整子表103 CostObj 成本对象表104 CurrentStock 现存量表105 Customer 客户档案106 CustomerClass 客户分类体系107 CW_CodePlan 科目计划初始(code plan)108 CW_CodePlus 科目追加计划(code plus)109 CW_DeptPlan 部门计划初始(department plan)110 CW_DeptPlus 部门追加计划(department plus)111 CW_ProfPlan 利润计划初始(profit plan)112 CW_ProfPlus 利润追加计划(profit plus)113 CW_ProjPlan 项目计划初始(project plan)114 CW_ProjPlus 项目追加计划(project plus)115 CW_WideDeptCode 粗放部门计划控制科目(wide department code) 116 CW_WideProjCode 粗放项目计划控制科目(wide project code)117 Dep_Auth118 Department 部门档案119 DispatchList 发货单、委托代销结算单主表120 DispatchLists 发货单、委托代销结算单子表121 DistrictClass 地区分类体系122 Dsign 凭证类别表123 Dsigns 凭证类别子表124 dtproperties125 DynTemplet 打印版面临时表模版126 EnDispatch 委托代销发货单主表127 EnDispatchs 委托代销发货单子表128 Exch 汇率表129 ExpenseItem 销售费用项目130 ExpenseVouch 代垫费用主表131 ExpenseVouchs 代垫费用子表132 fa_AssetAttached 17_附属设备133 fa_AssetTypes 06_资产类别134 fa_Cards 16_卡片135 fa_CardsSheets 34_卡片Sheets表136 fa_Control 30_记录互斥137 fa_Departments 07_部门138 fa_Depreciations 11_折旧方法139 fa_DeprList 34_折旧日志140 fa_DeprTransactions 19_折旧141 fa_DeprVoucherMain 23_折旧分配凭证主表142 fa_DeprVouchers 24_折旧分配凭证143 fa_DeprVouchers_pre 24_折旧分配凭证_准备144 fa_Dictionary 12_常用参照字典145 fa_uateMain 21_评估单主表146 fa_uateVouchers 22_评估单147 fa_Items 12_项目148 fa_ItemsManual 32_自定义项目149 fa_ItemsOfModel 14_对应各样式的项目150 fa_ItemsOfQuery 35_查询项目151 fa_JKItemSet 数据接口设置表152 fa_JKSet 数据接口文件格式表153 fa_Log 33_日志154 fa_Models 13_样式155 fa_Msg 29_信息156 fa_Objects 03_对象表157 fa_Operators 02_操作员158 fa_Origins 09_增减方式159 fa_QueryFilters 05_查询条件160 fa_Querys 04_查询161 fa_ReportTemp162 fa_Status 10_使用状况163 fa_Total 31_汇总表164 fa_Vouchers 20_变动单165 fa_WorkLoad 18_工作量166 fa_ZWVouchers 外部凭证临时表167 FD_AccDef 帐户定义表168 FD_AccSet 帐户设置表169 FD_AccSum 累积类帐户总帐表170 FD_AccUnit 开户单位定义表171 FD_CadAcr 结息日结转利息单据表172 FD_CadSet 结息日设置表173 FD_CadSets 结息日设置子表174 FD_Class 单据类别表175 FD_CreAcrRcp 贷款利息还款单据表176 FD_Cred 贷款表177 FD_Dzd 对帐单178 FD_DzdUnit 对帐单单位179 FD_Fetch 取款表180 FD_Hasten 催款单181 FD_Intra 利率设置表182 FD_Intras 利率设置子表183 FD_Item 项目大类定义表184 FD_Items 项目定义表185 FD_Itemss 项目科目、项目帐户表186 FD_Option 选项187 FD_Return 还款表188 FD_Sav 存款表189 FD_SettAcc 结算表190 FD_UnwAcrRcp 拆借利息还款单据表191 FD_UnwDeb 内部拆借表192 FD_UnwRet 内部拆借还款表193 FD_Vouch 凭证借贷方科目定义表194 Fitem 项目大类195 fitemgrademode 项目分类定义模版196 fitemstructure 项目结构定义197 fitemstrumode 项目目录定义模版198 foreigncurrency 币种表199 GL_accass 辅助总帐200 GL_accsum 科目总帐201 GL_accvouch 凭证及明细帐202 GL_bage 往来帐龄区间定义203 GL_bautotran 自动转帐定义204 GL_bdigest 常用摘要表205 GL_bfreq 常用凭证206 GL_bmulti 多栏定义207 GL_bmultiGroup208 GL_btext 往来函证信息209 GL_CashTable210 GL_DigestDisp211 GL_mccontrol 科目并发控制表212 GL_mcodeauth 科目权限表213 GL_mcodeused 科目常用项214 GL_mend 帐套结帐状态表215 GL_merror 对帐出错信息216 GL_mitemused 项目常用项217 GL_mpostcond 最近一次记帐凭证218 GL_mpostcond1219 GL_msysname 系统名称对照表220 GL_mvcontrol 凭证并发控制表221 GL_mvocontrol 外部凭证并发控制表222 GL_myaccount 我的帐簿223 GL_mybooktype 帐簿套打格式224 GL_myoutput 输出栏目225 GL_ViewItem226 GL_VouchSync227 GL_XmZcDetail228 GradeDef 编码规则表229 IA_DifRateDef230 IA_HeadSet 存货科目设置表231 IA_Individual232 IA_InvTData 存货临时表233 IA_MoneyPlan 存货核算资金占用规划表234 IA_OppHead235 IA_QueCondition 查询条件236 IA_Subsidiary 存货核算存货明细帐237 IA_Summary 存货核算存货总帐238 IA_tblRCsetM239 IA_ValuationAss 存货核算计价辅助数据表240 Inventory 存货目录241 InventoryClass 存货分类体系242 InvoiceItem 单据项目定义243 InvoiceItem_ 单据项目定义244 InvoiceItem_Ap 单据项目定义245 InvoiceItem_PRN 单据项目定义246 InvoiceItem_sal 单据项目定义247 Invoiceitem_salPRN 单据项目定义248 InvoiceItema 单据项目定义249 InvoiceItemaPRN 单据项目定义250 InvPosition251 ItemDef 用户可选择项目表252 JustInVouch 出入库调整单主表253 JustInVouchs 出入库调整单子表254 KCHSItem 单据项目定义255 KCHSItemPRN 单据项目定义256 LockVouch 单据锁定表257 MainBatch 批次主文件258 MatchVouch259 MatchVouchs260 MaxVouch 最大单号表261 NowReceipt 现收款表262 OverStockVouch 呆滞积压处理单主表263 OverStockVouchs 呆滞积压处理单子表264 PayCondition 付款条件265 Person 职员档案266 Po 采购定单定义267 PO_Podetails 采购定单（明细）268 PO_Pomain 采购定单（主表）269 PO_Quodetails 询／报价单（明细）270 PO_Quomain 询／报价单（主表）271 PO_VendorProcucts 供应商产品272 Position273 PP_IMRPdetails 独立需求计划（明细）274 PP_IMRPmain 独立需求计划（主表）275 PP_Lock276 PP_MPSdetails 生产计划（明细）277 PP_MPSmain 生产计划（主表）278 PP_period 计划周期279 PP_PeriodTo280 PP_PPCDetails 采购计划（明细）281 PP_PPCmain 采购计划（主表）282 PP_PU 采购计划-采购入库对照表283 PP_RelateXS284 PP_RMRPdetails 相关需求计划（明细）285 PP_RMRPmain 相关需求计划（主表）286 PriceJustify 调价记录表287 PrintDef 表格头尾项目定义288 PrintEx289 ProductStructure 产品结构主表290 ProductStructures 产品结构子表291 PS 采购结算单显示定义292 PU_LeftSum 采购余额一览表293 PurBillVouch 采购发票主表294 PurBillVouchs 采购发票子表295 PurchaseType 采购类型296 PurSettleVouch 采购结算单主表297 PurSettleVouchs 采购结算单子表298 QuotedPriceVouch 报价单主表299 QuotedPriceVouchs 报价单子表300 Rd_Style 收发类别301 RdRecord 收发记录主表302 RdRecords 收发记录子表303 RP_bankrecp 银行对帐单(银行日记帐) 304 RP_cheque 支票登记簿305 Rpt_FldDEF 报表查询项目定义306 Rpt_FltDEF 筛选条件定义307 Rpt_Folder 帐夹管理308 Rpt_GlbDEF 报表查询定义309 RPT_GRPDEF 分组定义310 RPT_ItmDEF 报表单元选项311 Rpt_RelDEF 关系定义312 SA_Account 销售总帐313 SA_INIMain314 SA_INISub315 SA_SalePlan 销售计划表316 SA_WrapLease 包装物租借表317 SaleBillVouch 销售发票主表318 SaleBillVouchs 销售发票子表319 SalePayVouch 销售支出单主表320 SalePayVouchs 销售支出单子表321 SalePrice 销售价目表322 SaleRelation 销售关联表323 SaleRelation_Bak324 Sales_Control 销售菜单表325 SaleType 销售类型326 ScrapVouch 报废单主表327 ScrapVouchs 报废单子表328 SettleStyle 结算方式329 ShippingChoice 发运方式表330 Sindexs331 SO_SODetails 销售订单子表332 SO_SOMain 销售订单主表333 SO_SOText 销售订单合同文本334 Srelations335 ST_TotalAccount 库存总帐336 TableName337 TableRelation 表间关联描述338 TransVouch 转库单主表339 TransVouchs 转库单子表340 Ua_account341 Ua_account_sub342 Ua_auth343 Ua_control344 Ua_holdauth345 Ua_period346 Ua_subsys347 Ua_user348 UFFA_Model_AccInfomation_Init 349 UFFA_Model_fa_AssetAttached_Init 350 UFFA_Model_fa_AssetTypes_Init351 UFFA_Model_fa_Cards_Init352 UFFA_Model_fa_CardsSheets_Init353 UFFA_Model_fa_Control_Init354 UFFA_Model_fa_Departments_Init355 UFFA_Model_fa_Depreciations_Init356 UFFA_Model_fa_DeprList_Init357 UFFA_Model_fa_DeprTransactions_Init 358 UFFA_Model_fa_DeprVoucherMain_Init 359 UFFA_Model_fa_DeprVouchers_Init360 UFFA_Model_fa_DeprVouchers_per_Init 361 UFFA_Model_fa_Dictionary_Init362 UFFA_Model_fa_uateMain_Init363 UFFA_Model_fa_uateVouchers_Init364 UFFA_Model_fa_Items_Init365 UFFA_Model_fa_ItemsManual_Init366 UFFA_Model_fa_ItemsOfModel_Init367 UFFA_Model_fa_ItemsOfQuery_Init368 UFFA_Model_fa_Log_Init369 UFFA_Model_fa_Models_Init370 UFFA_Model_fa_Msg_Init371 UFFA_Model_fa_Objects_Init372 UFFA_Model_fa_Operators_Init373 UFFA_Model_fa_Origins_Init374 UFFA_Model_fa_QueryFilters_Init375 UFFA_Model_fa_Querys_Init376 UFFA_Model_fa_ReportTemp_Init377 UFFA_Model_fa_Status_Init378 UFFA_Model_fa_Total_Init379 UFFA_Model_fa_Vouchers_Init380 UFFA_Model_fa_WorkLoad_Init381 UFFA_Model_fa_ZWVouchers_Init382 UserDef 自定义项定义表383 UserDefine 自定义项数值表384 Vendor 供应商档案385 VendorClass 供应商分类体系386 Vouchers 单据定义387 VouchFormat 单据格式主表388 VouchFormats 单据格式子表389 VouchList 单据列表定义表390 VouchType 单据类型表391 WA_account 工资类别管理表392 WA_Auth393 WA_Authority394 WA_Bank 银行设置表395 WA_Bank_Set 银行格式设置表396 WA_BankName 银行名称设置表397 WA_BankPar 银行代发参数表398 WA_BankTop 银行代发首末行定义表399 WA_Currency 工资汇率表400 WA_dept 各工资类别的部门表401 WA_FilterExpList 过滤项目表402 WA_FilterName 过滤器名称表403 WA_formula 计算公式设置表404 WA_FT_KM 工资分摊科目比例表405 WA_FT_Sum 工资分摊总额参数表406 WA_FTDept 工资分摊部门表407 WA_FTInfo408 WA_FTName 分摊计提名称表409 WA_grade 人员类别表410 WA_GZBItemDept 表项目组成表（部门）411 WA_GZBItemGrd 表项目组成表（类别）412 WA_GZBItemTitle 表项目组成表（栏目）413 WA_GZBName 表名称表414 WA_GZData 工资数据表415 WA_GZFT 工资分摊表416 WA_GZHZB 工资汇总表417 WA_GZItem 各工资类别工资项目设置表418 WA_GZNameList 工资项目参照表419 WA_GzsumComCfg420 WA_Gztblset 工资项目设置表421 WA_JKItemSet 数据接口设置表422 WA_JKSet 数据接口文件格式表423 WA_psn 人员表424 WA_PsnMsg 人员附加信息表425 WA_SDS 所得税数据表426 WA_SDS_p 所得税设置表427 WA_SDS_SL 所得税税率表428 WA_SelectMoney 票面额设置表429 WA_State 数据处理状态表430 WA_tblRCsetM431 WA_tblRCsetP432 WarehAuth433 Warehouse 仓库档案434 Wastage。