灯控台（Lightconsole）

灯控台（Light console）
DMX-512 programming instructions
Turn on the power
1, open the power supply, wait for about 5 seconds to show "101", press the "program" button for about 3 seconds into the programming state, corresponding to the digital screen "program" indicator light flashing;
2, press the "bank" button up and down to select the program number to edit;
3. Select the light number to control. Press the numeric key under "scammers";
4, set the lamp the function of the data (i.e., push "scenes" under the fader to the desired position);
5, press the "midi/add" button, and then press the "scenes" under the 1 key, the surface of the board all the flashing a few times, such a scene is set up;
6, choose to control the lights, press the "scammers" digital key below, the function setting lamp data (i.e., push "scenes" under the fader to the desired position), click "midi/add" button, click the "scenes" followed by 2... 8 keys, each program can be compiled 8 scenes, compiled by the "program" button, about 3 seconds to exit the programming state, the program will automatically store.
Function
1, open the power supply, wait for about 5 seconds, digital screen shows "101", press the "bank" button up and down to select the program number to run;
2, click "auto/del" button that will run the program, adjust the "SPEED" and "FADE TIME" fader can change the running speed and time, the program can be run in the press "bank" on the key to run the program, click "Blackout" button will enter the suspended state.
delete
1, open the power supply, wait for about 5 seconds, digital screen shows "101", press the "program" button for about 3 seconds into the programming state, corresponding to the digital screen "program" indicator light flashing;
2, press the "bank" button up and down to select the program number to be deleted;
3, according to the "1 key auto/del" and "scenes", all the lights flashing on a few, that has been deleted at the same time, according to the first view; "2 key auto/del" and "scenes", all the lights flashing on a few, that has been deleted second repeat the scene, so you can put 8 in a scene deleted.
Chases programming
CHASES programming is the combination of multiple programs as
a program, running CHASES will run inside the program
1, in the program well, according to the "program" button for about 3 seconds into the programming, the corresponding digital screen "program" light flashes, you should choose the programming of the CHASES press, digital tube displays 1101 or 2101 etc.;
2, press the "bank" button up and down, select the program number to be programmed into the CHASES;
3, press the "midi/add" button, and then press the "scenes" under the 1 key, the panel all the lights flashing a few times;
4, press the "midi/add" button, and then press the "scenes" under the "2 health", the panel all the lights flashing a few times, so repeat the procedures inside the edited scenes stored in the CHASES;
5, and then press the "bank" button up and down, select another to be programmed into the CHASES program number;
6, press the "midi/add" button, and then press the "scenes" under the 1 key, the panel all the lights flashing a few times;
7, press the "midi/add" key,
Just press the 2 button under "scenes", and all the lights on the panel will flicker a few times, so you can store the edited scenes in the program repeatedly to CHASES;
8, you want to weave into the CHASES program are compiled, press the "program" button for about 3 seconds to exit programming state, the program will automatically store.
Operation of Chases
Turn on the power and wait for about 5 seconds digital display "101", click the CHASES key you want to run, click "auto/del" button that will run the program, adjust the "SPEED" and "FADE TIME" fader can change the running speed and time, click "Blackout" button will enter a suspended state. Please note when the operation of the digital screen lights in what state.
DMX-512 panel function description
1, SCAMMERS
Press the SCAMMER button, the LED lamp next to the light, which is connected with the output of 8 channels can be regulated, while SCENES is running, if adjustable potentiometer control is OFF, it will not affect the potentiometer output channels, but if the adjustable potentiometer control for ON, the channel output with the corresponding adjustable potentiometer change;
2, SCENES according to Jian
Press a SCENE key to trigger SCENE or deposit a SCENE, and second digital tube heads display SCENES-1-8;
3 、 adjustable potentiometer;
Adjust the adjustable potentiometer to change the channel output size of DMX. The minimum is 0, the maximum is 255, or eight consecutive channels can be controlled from the 0%-100%, the adjustable potentiometer 1-8;
4, PAGE/SELECT key
Select PAGE A or PAGE B, PAGE A is the first eight channels of each SCANNER, and PAGE B is the last eight channels of each SCANNER;
5, SPEED SLIDER
Push the push rod to adjust the light speed;
6, FADE, TIME, SIDER
Push this push rod to adjust the FADE TIME;
7, LED DISPLAY
8, BANK key (up / down)
Third bit and fourth bit digital tube display BANKS (01-30), press the up / down arrow keys, the BANK increases or decreases, the SCENE display for the BANK in SCENE;
9, CHASE, 1-CHASE, 6 keys
Options for CHASES programming or CHASES operation;
10, PROGRAM key
The power on the machine in the running state, press the PROGRAM keyboard for 2 seconds, programming lights flashing, programmable SCENE and CHASE, and then press the PROGRAM button for 2 seconds, programming instructions lights out, back to the running state;
11, MIDI/ADD key
A, in the running state hold MIDI key for 2 seconds, flashing third and 4 digital tube, up or down by selecting the MIDI channel, MIDI channel selection settings then press the MIDI button 2 seconds from the end of the MIDI channel are stored, or in addition to any key up / down arrow keys outside the end of the MIDI channel is not set MIDI storage channel selection;
B, in programming state, used for editing;
12, AUTO/DEL key
A, in the running state, press the AUTO/DEL key, automatically trigger the indicator light, that means in the automatic trigger state, and then press the AUTO button to exit the automatic trigger state, automatically trigger the indicator light;
B, in programming state, for SCENE and CHASE programming;
13, MUSIC/BANK, COPY key
A, in operation, press the MUSIC key, the sound trigger light is on, the sound can trigger SCENES, and then press the MUSIC button, the sound trigger indicates the light out,
Exit sound triggered state;
B, in programming state, for SCENE and CHASE programming;
14, TAP, SYNC/DISPLAY key
A. (1) in the AUTO running state, the last two times press the TAP SYNC/DISPLAY key to determine the speed of SCENE operation, the maximum time is ten minutes;
(2) not in the AUTO state, converting 00-255 or 0%-100%;
B. in programming state
(1) when CHASE is programmed, there is a conversion between the step display and the BANK display;
(2) not converting 00-255 or 0%-100% when CHASE is programmed.。