HAT2029R-EL-E中文资料
HAT2029中文资料
ADE-208-525D (Z) 5th. Edition
February 1999
SOP–8
78 DD
8 7 65
1 234 56 DD
2
4
G
G
S1
MOS1
S3
MOS2
1, 3
Source
2, 4
Gate
5, 6, 7, 8 Drain
HAT2029R
Absolute Maximum Ratings (Ta = 25°C)
Switching Characteristics 500
200
t d(off)
100
tf
50
tr
t d(on) 20
10
5 0.1
VGS = 4 V, V DD = 10 V PW = 3 µs, duty < 1 %
0.2 0.5 1 2
5 10
Drain Current I D (A)
Drain to Source Voltage V DS (V)
Drain to Source Voltage V DS(on) (V)
Drain to Source Saturation Voltage vs. Gate to Source Voltage
0.5 Pulse Test
0.4
0.3
0.2
ID=5A 0.1
2A 1A
0
2
4
6
8
10
Gate to Source Voltage V GS (V)
7.5
A
Channel dissipation
Pch Note2
2
马格тро尔HD系列粒子动力学仪器说明书
Fig.1 : HD-700 Series Hysteresis DynamometerProvided by: (800)404-ATECAdvanced Test Equipment Corp .®Rentals • Sales • Calibration • ServicePage 2 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.ED DESCRIPTIONWith Magtrol’s Engine Dynamometers, high performance motor testing is available to manufacturers and users of small engines. Magtrol’s Engine Dynamometers have been designed to address the severe, high vibration conditions inherent in internal combustion engine testing.Magtrol’s Engine Dynamometers are highly accurate (± 0.25% of full scale) and can be controlled either manually or via a PC based Controller. For a small engine test stand, Magtrol offers a full line of controllers, readouts and software.As with all Magtrol Hysteresis Dynamometers, engine loading is provided by Magtrol’s Hysteresis Brake, which provides: torque independent of speed, including full load at 0 rpm; excellent repeatability; frictionless torque with no wearing parts (other than bearings); and long operating life with low maintenance.ED APPLICATIONSThe Engine Dynamometers are ideally suited for emissions testing as set forth in CARB and EPA Clean Air Regulations. The Dynamometers will offer superior performance on the production line, at incoming inspection or in the R&D lab.OPERATING PRINCIPLESAIR GAPFIELD COILBALL BEARINGSSHAFTPOLE STRUCTUREHUBROTOR (Drag Cup)Magtrol Hysteresis Dynamometers absorb power with a unique Hysteresis Braking System which provides frictionless torque loading independent of shaft speed. The Hysteresis Brake provides torque by the use of two basic components—a reticulated pole structure and a specialty steel rotor/shaft assembly—fitted together but not in physical contact. Until the pole structure is energized, the drag cup can spin freely on its shaft bearings. When a magnetizing force from the field coil is applied to the pole structure, the air gap becomes a flux field and the rotor is magnetically restrained, providing a braking action between the pole structure and rotor.DYNAMOMETER SELECTIONMagtrol’s Hysteresis Dynamometers cover a wide range of Torque, Speed and Mechanical Power ratings. To select the appropriate size Dynamometer for your motor testing needs, you will need to determine the Maximum Torque, Speed and Power applied to the Dynamometer.MAXIMUM TORQUEThe Magtrol Hysteresis Absorption Dynamometer will develop braking torque at any speed point, including low speed and stall conditions (“0” rpm). It is important to consider all torque points that are to be tested, not only rated torque, but also locked rotor and breakdown torque. Dynamometer selection should initially be based on the maximum torque requirement, subject to determining the maximum power requirements.MAXIMUM SPEEDThis rating is to be considered independent of torque and power requirements, and is the maximum speed at which the Dynamometer can be safely run under free-run or lightly loaded conditions. It is not to be considered as the maximum speed at which full braking torque can be applied.MAXIMUM POWER RATINGSThese ratings represent the maximum capability of the Dynamometer Braking System to absorb and dissipate heat generated when applying a braking load to the motor under test. The power absorbed and the heat generated by the Dynamometer is a function of the Torque (T) applied to the motor under test, and the resulting Speed (n) of the motor. This is expressed in these power (P) formulas:SI:P (watts) = T (N·m) × n (rpm) × (1.047 × 10-1)English: P (watts) = T (lb·in) × n (rpm) × (1.183 × 10-2)Metric: P (watts) = T (kg·cm) × n (rpm) × (1.027 × 10-2)All of Magtrol’s controllers, readouts and software calculate horsepower as defined by 1 hp = 550 lb·ft / s. Using this definition:hp = P (watts) / 745.7The Dynamometer’s ability to dissipate heat is a function of how long a load will be applied. For this reason, the maximum power ratings given are based on continuous operation under load, as well as a maximum of 5 minutes under load.To safely dissipate heat and avoid Dynamometer failure, the maximum power rating is the most important consideration in selecting a Dynamometer.DATASHEET Page 3 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without PLETE PC CONTROLMagtrol’s M-TEST 7 Software is a state-of-the-art motor testing program for Windows®-based data acquisition. Used with a Magtrol Programmable Dynamometer Controller, Magtrol M-TEST 7 Software provides the control of any Magtrol Dynamometer and runs test sequences in a manner best suited to the overall accuracy and efficiency of the Magtrol Motor T est System. The data that is generated by Magtrol’s Motor T esting Software can be stored, displayed and printed in tabular or graphic formats, and can be easily imported into a spreadsheet.Written in LabVIEW™, M-TEST 7 has the flexibility to test a majority of motor types in a variety of ways. Because of LabVIEW’s versatility, obtaining data from other sources (e.g. thermocouples), controlling motor power and providing audio/visual indicators is relatively easy.Magtrol’s M-TEST 7 Software is ideal for simulating loads, cycling the unit under test and motor ramping. Because it is easy to gather data and duplicate tests, the software is ideal for use in engineering labs. T ests can be programmed to run on their own and saved for future use allowing for valuable time savings in production testing and incoming/outgoing inspection.SPECIFICATIONSMODELTORQUE MEASURE UNIT CODE a)MAXIMUMTORQUERANGEDRAG TORQUEDE-ENERGIZED AT1,000 RPMNOMINAL INPUT INERTIA MAX. POWER RATINGS MAXIMUM SPEED c)BRAKE COOLING METHOD5 MINUTECONTINUOUS b)lb·ft·s 2kg·m 2WWRPMN·mED-7155N 6.200.035 N·m 1.27 × 10-3 1.72 × 10-3 3 400 3 00025 000Blower (included)ED-8155N28.00.14 N·m9.61 × 10-31.30 × 10-27 0006 00012 000Blower (included)a) All -5N(A) dynamometers are 5 Volt Output. Contact Magtrol for 6N (English), 7N (Metric) and 8N (SI) Specifications.b) Note: Operating at the continuous power rating for periods of up to 4 hours is acceptable. However, operating for extended periods at high temperatures willresult in premature component and bearing failure. Limiting the length of the cycle and the component temperatures will guard against premature failure. Where continuous duty is desired for longer time intervals, component temperatures should be maintained less than 100°C; monitoring the outside brake surface temperature is a sufficient reference.c) The maximum speed will depend on what type of keyway (if any) is used on the shaft. Unless specified, the dynamometer shaft will be made without a keyway.DATASHEET Page 4 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.a) All -5N(A) dynamometers are 5 Volt Output. Contact Magtrol for 6N (English), 7N (Metric) and 8N (SI) Specifications.b) Note: Operating at the continuous power rating for periods of up to 4 hours is acceptable. However, operating for extended periods at high temperatures willresult in premature component and bearing failure. Limiting the length of the cycle and the component temperatures will guard against premature failure. Where continuous duty is desired for longer time intervals, component temperatures should be maintained less than 100°C; monitoring the outside brake surface temperature is a sufficient reference.c) Requires air cooling provided by user. Regulator and filter package is provided as standard equipment on these units.MODELTORQUE MEASURE UNITCODE a)MAXIMUMTORQUERANGEDRAG TORQUEDE-ENERGIZEDAT 1,000 RPMNOMINAL INPUT INERTIAMAX. POWER RATINGS MAXIMUM SPEEDBRAKE COOLING METHOD5 MINUTE CONTINUOUS b)lb·ft·s 2kg·m 2WWRPMN·mSTANDARDHIGHSPEEDHD-1065N 0.0180.056 mN·m 7.04 × 10-79.54 × 10-735730 00050 000Convection HD-1005N 0.080.64 mN·m 3.40 × 10-6 4.61 × 10-6752025 00040 000Convection HD-4005N 0.28 2 mN·m 1.55 × 10-5 2.10 × 10-52005525 00040 000Convection HD-5005N 0.85 5 mN·m 8.05 × 10-5 1.09 × 10-44008025 00040 000Convection HD-5105N 0.85 5 mN·m 8.05 × 10-5 1.09 × 10-475037525 00040 000CompressedAir c) (7 CFM @ 1.75 PSI)HD-5055N 1.7010 mN·m 1.61 × 10-4 2.18 × 10-480016025 00040 000Convection HD-5155N1.7010 mN·m1.61 × 10-42.18 × 10-41 50090025 00040 000CompressedAir c)(10 CFM @ 4 PSI)HD-7005N 3.100.013 N·m 5.51 × 10-47.47 × 10-470015025 00035 000Convection HD-7105N 3.100.013 N·m 5.51 × 10-47.47 × 10-4 1 50093525 00035 000Blower (included)HD-7055N 6.200.023 N·m 1.10 × 10-3 1.49 × 10-3 1 40030025 00035 000Convection HD-7155N6.200.023 N·m 1.10 × 10-31.49 × 10-33 4003 00025 00035 000Blower (included)HD-8005N 14.000.10 N·m4.43 × 10-3 6.01 × 10-3 2 800 1 80012 000N/ACompressedAir c)(13 CFM @ 10 PSI)HD-8105N 14.000.10 N·m4.43 × 10-3 6.01 × 10-3 3 500 3 00012 00015 000Blower (included)HD-8055N 28.000.14 N·m8.81 × 10-3 1.19 × 10-2 5 300 3 00012 000N/ACompressedAir c)(15 CFM @ 14 PSI)HD-8155N 28.000.14 N·m 8.81 × 10-3 1.19 × 10-27 000 6 00012 00015 000Blower (included)HD-8255N56.500.40 N·m1.85 × 10-22.51 × 10-214 00012 0008 00010 000Blower (included)DATASHEET Page 5 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.MODELVOLTAGEVASTYLERATINGHD-1XX-XN 120 V 30UL/CSA 300 mA 250 V SB HD-1XX-XNA 240 V 30IEC 125 mA 250 V T HD-4XX-XN 120 V 30UL/CSA 300 mA 250 V SB HD-4XX-XNA 240 V 30IEC 125 mA 250 V T HD-5XX-XN 120 V 30UL/CSA 300 mA 250 V SB HD-5XX-XNA 240 V 30IEC 125 mA 250 V T HD-800-XN 120 V 65UL/CSA 800 mA 250 V SB HD-800-XNA 240 V 65IEC 315 mA 250 V T HD-810-XN 120 V 65UL/CSA 800 mA 250 V SB HD-810-XNA 240 V 65IEC 315 mA 250 V T HD-805-XN 120 V 130UL/CSA 1.25 A 250 V SB HD-805-XNA 240 V 130IEC 630 mA 250 V T HD/ED-815-XN 120 V 130UL/CSA 1.25 A250 V SB HD/ED-815-XNA 240 V 130IEC 630 mA 250 V THD-825-XN 120 V N/A N/A N/A HD-825-XNA240 VN/AN/AN/AAllow approximately 6 in to 8 in (152 mm to 203 mm) between rear of dynamometer base plate and blower for connection hardware. Required hardware is supplied with the dynamometer.BL-002 Blower has two filter elements.120 VAC 60 HzØ A ECB DFGAir FilterDyno. Brake Air OutletOn/Off SwitchBLOWER DIMENSIONSMODELBL-001BL-002inmmin mmØ A 71787178B 1127911279C 1025410254D 820315381E 41024102F 820312305G 125125Weight8.5 lb3.9 kg18 lb8.1 kg▪Models HD-710, HD-715, HD-810 and ED-715 include the BL-001 blower.▪Models HD-815 and ED-815 include the BL-002 blower. ▪Model HD-825 uses two BL-002 blowers for cooling its two brake sets.BLOWER POWER AND FUSESMODELVOLTAGEVASTYLERATINGBL-001120 V 600UL/CSA 6.3 A 250 V SB BL-001A 240 V 500IEC 3.15 A 250 V T BL-002120 V 1,000UL/CSA 15 A 250 V SB BL-002A240 V1,000IEC6.3A250 VTDATASHEET Page 6 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.NOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.HD-100/400/500 SERIES WITH LONG BASE PLATEEAHJØNM FCGL DQP ØBSHAFT END DET AIL (2:1)(FLAT)MODEL UNITS AØ BC D E F G H JL a)M a)Ø NP Q WEIGHTHD-106in 0.500.1245/0.1247 3.5179.38100.5 6.38.515.58.50.370.0150.37512.0 lb mm 12.7 3.162/3.16788.9432238.325412.71592163942169.40.389.53 5.4 kg HD-100in 0.750.1870/0.1872 3.5179.13100.5 6.38.515.58.50.370.0250.37512.5 lb mm 19.1 4.750/4.75588.9432231.925412.71592163942169.40.649.53 5.7 kg HD-400in 0.670.2495/0.2497 3.5179.13100.5 6.38.515.58.50.370.030.43815.0 lb mm 17.0 6.337/6.34288.9432231.925412.71592163942169.40.7611.13 6.8 kg HD-500in 0.880.3745/0.3750 4.0179.13100.5 6.38.515.58.50.370.0470.37516.0 lb mm 22.29.512/9.525101.6432231.925412.71592163942169.4 1.199.537.3 kg HD-510in 0.880.3745/0.3750 4.0179.13100.5 6.38.515.58.50.37N/A16.0 lb mm 22.29.512/9.525101.6432231.925412.71592163942169.47.3 kg HD-505in 0.880.3745/0.3750 4.0209.64100.5 6.38.518.58.50.370.050.37518.0 lb mm 22.29.512/9.525101.6508244.925412.71592164702169.4 1.279.538.1 kg HD-515in 0.880.3745/0.37504.0209.64100.56.38.518.58.50.37N/A18.0 lb mm22.29.512/9.525101.6508244.925412.71592164702169.48.1 kga) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.* Shaft Flats are not available on high speed models.DATASHEET Page 7 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.AHJM FCGL DØNEQP ØBSHAFT END DET AIL (2:1)(FLAT)MODELUNITSAØ BCDEFGHJL a)M a)Ø NPQWEIGHTHD-106in 0.500.1245/0.1247 3.57.00.33110.5 6.38.5 6.09.840.350.0150.3757.5 lb mm 12.7 3.162/3.16788.9177.88.4279.412.7159216152.425090.389.53 3.4 kg HD-100in 0.750.1870/0.1872 3.57.00.08110.5 6.38.5 6.09.840.350.0250.3758.0 lb mm 19.1 4.750/4.75588.9177.8 2.1279.412.7159216152.425090.649.53 3.6 kg HD-400in 0.670.2495/0.2497 3.57.00.08110.5 6.38.5 6.09.840.350.030.43811.0 lb mm 17.0 6.337/6.34288.9177.8 2.1279.412.7159216152.425090.7611.13 5.0 kg HD-500in 0.880.3745/0.3750 4.07.00.08110.5 6.38.5 6.09.840.350.0470.37512.0 lb mm 22.29.512/9.525101.6177.8 2.1279.412.7159216152.42509 1.199.535.4 kg HD-510in 0.880.3745/0.3750 4.08.00.13110.56.38.57.09.840.35N/A12.5 lb mm 22.29.512/9.525101.6203.2 3.2279.412.7159216177.82509 5.7 kg HD-505in 0.880.3745/0.3750 4.09.50.10110.5 6.38.58.59.840.350.050.37513.0 lb mm 22.29.512/9.525101.6241.3 2.6279.412.7159216215.92509 1.279.535.9 kg HD-515in 0.880.3745/0.37504.010.250.10110.56.38.59.259.840.35N/A13.0 lb mm22.29.512/9.525101.6260.42.6279.412.7159216234.925095.9 kgNOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.HD-100/400/500 SERIES WITH SHORT BASE PLATEa) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.* Shaft Flats are not available on high speed models.DATASHEET Page 8 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.NOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.HD-700 SERIES WITH LONG BASE PLATEEAHJM FCØNGL DQP ØBSHAFT END DET AIL (2:1)(FLAT)MODEL UNITS AØ BC D E F G H JL a)M a)Ø NP Q WEIGHTHD-700in 1.250.4995/0.4999 5.8752412.75110.6259.51022.5723.90.3750.060.6339 lb mm 31.812.687/12.692149.2609.6323.9279.415.9241.3254571.5241.39.5 1.615.917.63 kg HD-710in 1.250.4995/0.4999 5.8752613.59110.6259.51024.59.50.375N/A 45 lb mm 31.812.687/12.692149.2660.4345.2279.415.9241.3254622.3241.39.520.30 kg HD-705in 1.250.4995/0.4999 5.8752813.62110.6259.51026.59.50.3750.060.6352 lb mm 31.812.687/12.692149.2711.2346.0279.415.9241.3254673.1241.39.5 1.615.923.50 kg HD-715in 1.250.4995/0.4999 5.8753014.29110.6259.51028.59.50.375N/A59 lb mm31.812.687/12.692149.2762.0363.0279.415.9241.3254723.9241.39.526.60 kgHD-700 SERIES WITH SHORT BASE PLATEEAHJM FCØNGLDQP ØBSHAFT END DET AIL (2:1)(FLA T)a) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.* Shaft Flats are not available on high speed models.a) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.* Shaft Flats are not available on high speed models.MODEL UNITS AØ BC D E F G H JL a)M a)Ø NP Q WEIGHTHD-700in 1.250.4995/0.4999 5.87511.340.09110.6259.5109.849.840.3750.060.6330 lb mm 31.812.687/12.692149.2288.0 2.2279.415.9241.3254250.02509.5 1.615.913.6 kg HD-710in 1.250.4995/0.4999 5.87512.500.09110.6259.51011.009.840.375N/A 36 lb mm 31.812.687/12.692149.2317.5 2.2279.415.9241.3254279.52509.516.3 kg HD-705in 1.250.4995/0.4999 5.87514.450.09110.6259.51012.959.840.3750.060.6343 lb mm 31.812.687/12.692149.2367.0 2.2279.415.9241.3254329.02509.5 1.615.919.5 kg HD-715in 1.250.4995/0.4999 5.87515.750.09110.6259.51014.259.840.375N/A50 lb mm31.812.687/12.692149.2400.02.2279.415.9241.3254362.02509.522.7 kgDATASHEET Page 9 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.NOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.ED-SERIES ENGINE DYNAMOMETERSMODEL UNITS AØ BC D E F G HL a)M a)Ø NP Q R WEIGHTED-715in 1.720.7490/0.7495 6.8716.0018.1311.00 1.0010.5014.509.500.370.64 1.000.18775 lb mm 43.719.025/19.037174.5406.4460.5279.425.4266.7368.3241.39.416.3525.4 4.8334 kg ED-815in 3.02 1.4995/1.500011.0023.0023.2717.00 2.0016.6320.8015.005/8-11 1.287 2.000.375285 lb mm76.738.087/38.100279.4584.2591.1431.850.8422.4528.3381.0THD32.750.89.53129.3 kga) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.CBAH M FØNGL D EQP ØBRSHAFT END DET AIL (2:1)(SQUARE KEY)HD-800 SERIES WITH LONG BASE PLATEEAHJØNM FCGLDKØBNOTE: For detailed dimension drawings of dynamometers with the T-slot base plate option, visit Magtrol’s Web site.MODEL UNITS AØ BC D E F G H JL a)M a)Ø NWEIGHTHD-800in 2.130.9995/1.0000938.523.8117214.61436.5150.53237.0 lb mm 5425.387/25.400228.697860543250.837135692738113.5107.2 kg HD-810in 2.050.9995/1.0000938.523.0917214.61436.5150.53233.0 lb mm 5225.387/25.400228.697858743250.837135692738113.5105.3 kg HD-805in 2.130.9995/1.0000938.520.5717214.61436.5150.54287.0 lb mm 5425.387/25.400228.697852243250.837135692738113.7129.7 kg HD-815in 2.120.9995/1.0000938.518.1917214.61436.5150.54288.0 lb mm5425.387/25.400228.697846243250.837135692738113.7130.1 kga) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.DATASHEET Page 10 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.NOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.HD-800 SERIES WITH SHORT BASE PLATESE AHJØNM FCGL DKØBa) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.An HD-825 Dynamometer with long base plate is available if ordered with the accompanying dynamometer table (TAB 0825L). Contact Magtrol for details.MODEL UNITSAØ BCDEFGHJL a)M a)Ø NPQRSTWEIGHTHD-825in 2.83 1.4995/1.50001138.538.9317216.61436.5150.54 1.28720.37621400.0 lb mm7238.087/38.100279.497898943250.842235692738113.732.6950.89.5350.825.4181.4 kga) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.MODEL UNITS AØ BC D E F G H JL a)M a)Ø NWEIGHTHD-800in 2.130.9995/1.0000917.25 2.5617214.61413.7815.750.35168.0 lb mm 5425.387/25.400228.64386543250.8371356350400976.2 kg HD-810in 2.050.9995/1.0000918.00 2.5917214.61414.0615.750.35164.0 lb mm 5225.387/25.400228.64576643250.8371356357400974.4 kg HD-805in 2.130.9995/1.0000920.50 2.5717214.61415.7515.750.35228.0 lb mm 5425.387/25.400228.65206543250.83713564004009103.4 kg HD-815in 2.120.9995/1.0000923.00 2.5917214.61419.0915.750.35236.0 lb mm5425.387/25.400228.65846643250.83713564854009107.0 kgQP ØBRNSHAFT END DET AIL (2:1)(SQUARE KEY)LDEAC STMFH GJØNMaximum Rated Speed for DynamometerMaximum KineticPower Rating Curve for Continuous Duty: Area under curve equals the maximum speed and torque combinations for a continuous duty motor test.10,00020,00030,00040,0000.0000.0020.0040.0060.0080.0100.0120.0140.0160.018S P E E D (r p m )TORQUE (Nm)HD-106, Power Absorbtion CurveMaximum Kinetic Power Rating Curve for Less Than Five Minutes: Area under curve equals themaximum speed and torque combinations for a motor test of less than five minutes.Maximum Torquefor DynamometerHD-106HD-106 HIGH SPEED HD-100HD-100 HIGH SPEEDHD-400HD-400 HIGH SPEED10,00020,00030,00040,00050,00060,0000.0000.0020.0040.0060.0080.0100.0120.0140.0160.018S P E E D (r p m )TORQUE (Nm)HD-106-HS, Power Absorbtion CurveThe power absorption curves represent the maximum power (heat) that the dynamometer can dissipate over time.5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.0100.0200.0300.0400.0500.0600.0700.080S P E E D (r p m )TORQUE (Nm)HD-100-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.0500.1000.1500.2000.250S P E E D (r p m )TORQUE (Nm)HD-400-HS, Power Absorbtion Curve10,00020,00030,00040,0000.0000.0020.0040.0060.0080.0100.0120.0140.0160.018S P E E D (r p m )TORQUE (Nm)HD-106, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.0100.0200.0300.0400.0500.0600.0700.080S P E E D (r p m )TORQUE (Nm)HD-100, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.0500.1000.1500.2000.250S P E E D (r p m )TORQUE (Nm)HD-400, Power Absorbtion CurveHD-500HD-500 HIGH SPEED HD-510HD-510 HIGH SPEEDHD-505HD-505 HIGH SPEEDHD-515HD-515 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.1000.2000.3000.4000.5000.6000.7000.800S P E E D (r p m )TORQUE (Nm)HD-500-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.1000.2000.3000.4000.5000.6000.7000.800S P E E D (r p m )TORQUE (Nm)HD-510-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.2500.5000.750 1.000 1.250 1.500S P E E D (r p m )TORQUE (Nm)HD-505-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.2500.5000.750 1.000 1.250 1.500S P E E D (r p m )TORQUE (Nm)HD-515-HS, Power Absorbtion CurveThe power absorption curves represent the maximum power (heat) that the dynamometer can dissipate over time.5,00010,00015,00020,00025,00030,0000.0000.1000.2000.3000.4000.5000.6000.7000.800S P E E D (r p m )TORQUE (Nm)HD-500, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.1000.2000.3000.4000.5000.6000.7000.800S P E E D (r p m )TORQUE (Nm)HD-510, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.2500.5000.7501.0001.2501.500S P E E D (r p m )TORQUE (Nm)HD-505, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.2500.5000.7501.0001.2501.500S P E E D (r p m )TORQUE (Nm)HD-515, Power Absorbtion CurveThe power absorption curves represent the maximum power (heat) that the dynamometer can dissipate over time.HD-700HD-700 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,0000.0000.5001.0001.5002.0002.5003.000S P E E D (r p m )TORQUE (Nm)HD-700-HS, Power Absorbtion CurveHD-710HD-710 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,0000.0000.5001.0001.5002.0002.5003.000S P E E D (r p m )TORQUE (Nm)HD-710-HS, Power Absorbtion CurveHD-705HD-705 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,0000.0001.0002.0003.0004.0005.0006.000S P E E D (r p m )TORQUE (Nm)HD-705-HS, Power Absorbtion CurveHD-715 AND ED-715HD-715 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,0000.0001.0002.0003.0004.0005.0006.000S P E E D (r p m )TORQUE (Nm)HD-715-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.5001.0001.5002.0002.5003.000S P E E D (r p m )TORQUE (Nm)HD-700, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.5001.0001.5002.0002.5003.000S P E E D (r p m )TORQUE (Nm)HD-710, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0001.0002.0003.0004.0005.0006.000S P E E D (r p m )TORQUE (Nm) HD-705, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0001.0002.0003.0004.0005.0006.000S P E E D (r p m )TORQUE (Nm) HD-715, Power Absorbtion CurveThe power absorption curves represent the maximum power (heat) that the dynamometer can dissipate over time.HD-800HD-8052,000 4,000 6,000 8,00010,00012,00014,00016,00018,0000.0002.0004.0006.0008.00010.00012.00014.000S P E E D (r p m )TORQUE (Nm)HD-810-HS, Power Absorbtion CurveHD-810HD-810 HIGH SPEEDHD-815 AND ED-815HD-815 HIGH SPEED2,000 4,000 6,000 8,00010,00012,00014,00016,00018,0000.0005.00010.00015.00020.00025.000S P E E D (r p m )TORQUE (Nm)HD-815-HS, Power Absorbtion CurveHD-825HD-825 HIGH SPEED2,000 4,000 6,000 8,00010,00012,0000.00010.00020.00030.00040.00050.000S P E E D (r p m )TORQUE (Nm)HD-825-HS, Power Absorbtion Curve2,000 4,000 6,000 8,00010,00012,00014,0000.0002.0004.0006.0008.00010.00012.00014.000S P E E D (r p m )TORQUE (Nm)HD-800, Power Absorbtion Curve2,000 4,000 6,000 8,00010,00012,00014,0000.0005.00010.00015.00020.00025.000S P E E D (r p m )TORQUE (Nm)HD-805, Power Absorbtion Curve2,000 4,000 6,000 8,00010,00012,00014,0000.0002.0004.0006.0008.00010.00012.00014.000S P E E D (r p m )TORQUE (Nm)HD-810, Power Absorbtion Curve2,000 4,000 6,000 8,00010,00012,00014,0000.0005.00010.00015.00020.00025.000S P E E D (r p m )TORQUE (Nm)HD-815, Power Absorbtion Curve1,000 2,000 3,000 4,000 5,000 6,000 7,0008,0009,0000.00010.00020.00030.00040.00050.000S P E E D (r p m )TORQUE (Nm) HD-825, Power Absorbtion Curve。
成都亨特尔科技实业有限公司清洁制革专用材料介绍
特点 ： 用 的复 合生 物 制剂 。 公 害 ， 污 染 ， 毛速 度快 。 专 无 无 脱 用途 ：
用于猪 、 、 的无公 害， 牛 羊 无污染的专用脱毛材料 。 取代传统的硫 化碱石灰脱毛 ， 减少对环境 的污染 。质量标准 ： 浅棕黄色粉末 ，
ｐ ０ １ ， Ｈ １～ １ 固含量 （ ）７ ％ ９ ±２
第 ９期
梁浩， 磺化油Ｓ 的表面活性 等： Ｓ
材 料 ・ 应舞 ｉ 用
都 亨特 尔科技实业有 限公 司清 洁 制革专 用材料介
◆ ＨＴＲ－ ５０ｌ ２
预处理。质量标准： 外观米白色粉末 ｐ ７同含量（ ９ ± Ｉ Ｈ６ ， ～ ％）１ ２
◆ ＨＴ ２ ０ Ｒ－ ５ ５ ｌ
◆ ＨＴＲ－ ０ ２５ ２
特点 ： 消除猪皮反绒服装革露底现象， 提高猪皮绒面质量和。用
途： 用于猪皮膨胀工序。质量标准： 外观白色标末； ９固含 ｌ ｐ８ ， Ｈ ￣
量（ ９ ２ ％）７±
◆ ＨＴＲ－ ５０ ２ ８
Ｉ
Ｉ
特点 ： 散纤 维 ， 散 毛根 ， 代 石 灰 ， 化 碱 用 于 生皮 膨 胀 。 消 松 松 取 硫 除制 革 污泥 的 产生 ， 革水 场 污 泥量 可减 少 ９ ％以上 ， 水量 减 制 ０ 用 少 ４ ％～ ０ ０ ５ ％。用途 ： 代 传 统 的石 灰 ， 化 碱用 于生 皮 的膨 胀 。 取 硫 质量 标 准 ： 观 白色稠 状液 ｐ ２ １ ， 外 Ｈ １～ ３ 固含量 （ ）７ ％ ４ ±２
进 展 ，０ ５ １（ ）２ ３ ２ １ ２ ０ ，７ ２ ：３ — ４ ．
比例 ，得 到 了在 保证 乳 液 ２ ４ｈ稳
定 的条件 下 ，所加 入 的油 脂最 大
Unit7知识点2023-2024学年人教版七年级英语上册
Unit7 How much are these socks?1.询问物品价格。
（1）How much is the/this/that +单数名词？It’s+价格。
（2）How much are the/these/those +可数名词复数？They’re +价格。
（3）What’s the price of ...?It’s+价格。
例：（1）How much is this Tshirt?It’s seven dollars.（2）How much are these socks?They’re two dollars.（3）What’s the price of these socks?It’s two dollars.2.询问物品的量，how many和how much意为“多少...”How many +可数名词复数How much +不可数名词3.socks(袜子), shorts(短裤), trousers(裤子), shoes(鞋子)常用复数。
4.big(大的), small(小的), short(短的), long(长的) 修饰名词时，放在颜色前。
big orange hat 大的橘色的帽子small yellow hat 小的黄色的帽子short brown Tshirt 短的棕色的T恤long green Tshirt 长的绿色的T恤5.man 复数men 男人woman women 女人woman teacher 复数women teachers 女老师6.Can I help you? 我能帮你吗？回答：Yes,please./No,thanks.=May I help you?=What can I do for you?7.I need a sweater for school. 我需要一件上学穿的毛衣。
（1）need sth. 需要某物（2）need to do sth. 需要做某事8.How about this one?这件怎么样？it和one辨析：it 同类同物，指上文出现过的同一事物。
上海尼赛拉傳感器有限公司 SHANGHAI NICERA 高输出型霍尔素子 交货说明书
１、绝对最大定额4．微型模制插件的安装保证条件（１）、至基板焊接安装推荐条件１）请避开至主体急加热·急冷的情况。
２）预热温度为３）焊接（例：回流法）温度为（２）、焊接方法及温度保证５、出口状态 （１）、包装卷带构造 装入5卷 装只小箱 注： 5盘卷带竖着 小箱内装有 大箱内装有放入小箱内 5盘卷带 6只小箱敏科技有i n t e c h .c６、素子外形图深圳市钧敏科技有限公司w w w .j u n m i n t e c h .c o m8、载带外形图9、卷带外形图 [单位：ｍｍ] 深圳市钧敏科技有限公司w w w .j u n m i n t e c h .c o mSHANGHAI NICERA交货说明书10、共 ７ 页 第 ７ 页ＮＨＥ５２８Ｆ－ＨＦ重要注意事项１０－１．关于绝对最大使用规格的注意事项如果超过了规格极限值进行使用，产品会发生故障，请注意。
１０－２．保管上的注意事项请确认储存环境。
尤其是下列或类似情况可能导致外观损坏、特征缺陷和／或装配相关的劣化。
１０－２－１．长时间暴露在阳光直射、高温和高温的环境。
作为保管条件，在温度４０℃以下，湿度８０％以下的环境下，１０－２－２．使用。
长期的保管，存在质量劣化的风险，如可焊性等。
腐蚀性气体、有机性气体、以及酸性、碱性气体的环境１０－２－３．请在交货后１年以内１０－２－４．灰尘多的环境。
１０－３．使用上的注意事项请注意以下事项１０－３－１．请勿焚烧、销毁、压碎或化学分解本产品。
※特别是焚烧、酸、碱等反应，可能产生有毒气体，会对人体造成危险，所以请绝对禁止。
１０－３－２．本产品请不要入口。
１０－３－３．请根据相关法律和用户内部废物处置条例进行处理。
１０－４．静电注意事项处理本产品时，应确保人体使用静电手环等接地良好，设备、工具请正确地连接，避免发生静电积聚。
１０－５．关于保证范围的注意事项下述情况为保证范围外１０－５－１．当用户处理不当或使用不当时１０－５－２．交纳人以外被追加处理的场合１０－５－３．其他，天灾·灾害等，不符上海尼赛拉责任的场合此外，此处的保修范围是指更换产品本身。
HAT2080R中文资料
HAT2080RSilicon N Channel MOS FETHigh Speed Power SwitchingREJ03G1180-0200(Previous: ADE-208-1229)Rev.2.00Sep 07, 2005 Features• Low on-resistance• Low drive current• High density mountingOutlineAbsolute Maximum Ratings(Ta = 25°C)Item Symbol Value UnitDrain to source voltage V DSS 250 V Gate to source voltage V GSS ±30 V Drain currentI D 1.7 A Drain peak currentI D (pulse) Note 113.6 ABody to drain diode reverse drain current I DR 1.7 A Channel dissipation Pch Note 2 2.5 WChannel temperatureTch 150°C Storage temperature Tstg –55 to +150 °CNotes: 1. PW ≤ 10 µs, duty cycle ≤ 1% 2. When using the glass epoxy board (FR4 40 × 40 × 1.6 mm), PW ≤ 10 sElectrical Characteristics(Ta = 25°C)Item Symbol Min Typ Max Unit Test ConditionsDrain to source breakdown voltage V (BR) DSS 250 — — V I D = 10 mA, V GS = 0 Gate to source leak current I GSS — — ±0.1 µA V GS = ±30 V, V DS = 0 Zero gate voltage drain currentI DSS — — 1 µA V DS = 250 V, V GS = 0 Gate to source cutoff voltageV GS (off) 3.0 — 4.0 V I D = 1 mA, V DS = 10 VStatic drain to source on state resistance R DS (on) — 0.65 0.85 Ω I D = 0.85 A, V GS = 10 V Note 3Forward transfer admittance |y fs | 1.2 2.0 — S I D = 0.85 A, V DS = 10 V Note 3Input capacitanceCiss — 300 — pF Output capacitanceCoss — 42 — pFReverse transfer capacitance Crss — 11 — pFV DS = 25 VV GS = 0 f = 1 MHz Turn-on delay time t d (on) — 18 — ns Rise timet r — 10 — nsTurn-off delay time t d (off) — 47 — nsFall timet f — 15 — ns V DD = 125 V, I D = 0.85 A V GS = 10 V R L = 147 Ω Rg = 10 Ω Total gate chargeQg— 11 — nC Gate to source chargeQgs—1.5—nCGate to drain chargeQgd — 5 — nCV DD = 200 V V GS = 10 V I D = 1.7 ABody to drain diode forward voltage V DF — 0.8 1.2 V I F = 1.7 A, V GS = 0 Note 3Body to drain diode reverse recovery time t rr— 80 — ns I F = 1.7 A, V GS = 0di F /dt = 100 A/µsNote: 3. Pulse testPackage DimensionsOrdering InformationPart Name Quantity Shipping ContainerHAT2080R-EL-E 2500pcs TapingNote: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product. RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001Renesas Technology Korea Co., Ltd.Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, KoreaTel: <82> 2-796-3115, Fax: <82> 2-796-2145Renesas Technology Malaysia Sdn. Bhd.Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, MalaysiaTel: <603> 7955-9390, Fax: <603> 7955-9510。
S油参数知识
13
微量水份含量、PPM
≤100
14
析气性（析气速度）A法μl/min
≤-100
＜0.015
6
闪点、（闭口杯）℃
≥135
7
凝固点℃
Hale Waihona Puke ≤-608运动粘度（cst),mm2/s,40℃
≤4.0
9
介电强度，50Hz,kv/2.5mm
≥60
10
介质损耗因数tgδ、90℃Hz
≤0.0010
11
体积电阻率PV，Ω·m，90℃
≥1×1012
12
相对介电常数ε，50Hz，25℃
2.45～2.6
13
5
酸值mgKOH/g
＜0.015
6
闪点、（闭口杯）℃
≥140
7
凝固点℃
≤-40
8
运动粘度（cst),mm2/s,40℃
≤7.0
9
介电强度，50Hz,kv/2.5mm
≥55
10
介质损耗因数tgδ、90℃Hz
≤0.001
11
体积电阻率PV，Ω·m，90℃
≥1×1012
12
相对介电常数ε，50Hz，25℃
苯基乙苯基乙烷（PEPE）和二芳基乙烷绝缘油（PXE）参数
产品名称
苯基乙苯基乙烷（PEPE）
序 号
指标名称、单位：
指标值
1
外观
无色或微黄色透明液体无悬浮物、无沉淀物无机械杂质
2
密度、20℃g/cm3
0.960-0.999
3
折射率n25D
1.5500～1.5700
4
比色散25℃
＞185
艾尔顿199129产品说明书
Eaton 199129Eaton Moeller® series Rapid Link - DOL starter, 6.6 A, Sensorinput 4, Actuator output 2, PROFINET, HAN Q4/2, with manualoverride switchGeneral specificationsEaton Moeller® series Rapid Link DOLstarter1991294015081971879120 mm270 mm220 mm 1.83 kgCCCIEC/EN 60947-4-2 UL approval RoHSCEUL 60947-4-2Assigned motor rating: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm at 50 Hz or 1800 min at 60 HzRAMO5-D420PNT-412RS1Product Name Catalog NumberEANProduct Length/Depth Product Height Product Width Product Weight Certifications Catalog NotesModel CodeParameterization: FieldbusParameterization: KeypadParameterization: drivesConnect mobile (App) Parameterization: drivesConnectKey switch position OFF/RESETKey switch position HAND2 Actuator outputsThermistor monitoring PTCTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operationElectronic motor protectionKey switch position AUTOManual override switchThermo-clickShort-circuit releaseExternal reset possibleTemperature compensated overload protection CLASS 10 AIP65NEMA 12Class A10,000,000 Operations (at AC-3)10,000,000 Operations (at AC-3)Direct starter0.3 A6.6 AIIIMotor starterPROFINET IO4000 VAC voltageCenter-point earthed star network (TN-S network) Phase-earthed AC supply systems are not permitted.DOL starterDCFeatures Fitted with:Functions ClassDegree of protectionElectromagnetic compatibility Lifespan, electricalLifespan, mechanicalModelOverload release current setting - min Overload release current setting - max Overvoltage categoryProduct categoryProtocolRated impulse withstand voltage (Uimp) System configuration typeTypeVoltage typeVertical15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftResistance: 10 - 150 Hz, Oscillation frequencyResistance: 57 Hz, Amplitude transition frequency on accelerationResistance: 6 Hz, Amplitude 0.15 mmResistance: According to IEC/EN 60068-2-6Max. 1000 mMax. 2000 mAbove 1000 m with 1 % performance reduction per 100 m -10 °C55 °C-40 °C70 °CIn accordance with IEC/EN 50178< 95 %, no condensationAdjustable, motor, main circuit0.3 - 6.6 A, motor, main circuit6.6 A (at 150 % Overload)Maximum of one time every 60 seconds 380 - 480 V (-15 %/+10 %, at 50/60 Hz) 20 - 35 ms20 - 35 ms50/60 HzAC-53a47 Hz 3 HP10 kA0 AType 1 coordination via the power bus' feeder unit, Main circuit0 V0 V0 VMounting position Shock resistance Vibration AltitudeAmbient operating temperature - min Ambient operating temperature - max Ambient storage temperature - min Ambient storage temperature - max Climatic proofingCurrent limitationInput currentMains switch-on frequency Mains voltage tolerance Off-delayOn-delayOutput frequency Overload cycleRated frequency - min Rated frequency - max Assigned motor power at 460/480 V, 60 Hz, 3-phaseRated conditional short-circuit current (Iq)Rated conditional short-circuit current (Iq), type 2, 380 V, 400 V, 415 VShort-circuit protection (external output circuits)Rated control supply voltage (Us) at AC, 50 Hz - minRated control supply voltage (Us) at AC, 50 Hz - maxRated control supply voltage (Us) at AC, 60 Hz - min63 Hz6.6 A6.6 A0.09 kW3 kW0 kW3 kW480 V AC, 3-phase400 V AC, 3-phase50/60 Hz, fLN, Main circuitAC voltageCenter-point earthed star network (TN-S network) Phase-earthed AC supply systems are not permitted.0 V0 V0 V24 V DC (-15 %/+20 %, external via AS-Interface® plug) Connections pluggable in power section210 m, Radio interference level, maximum motor cable lengthMeets the product standard's requirements. Meets the product standard's requirements. Meets the product standard's requirements. Meets the product standard's requirements.Rapid Link 5 - brochureDA-SW-drivesConnectDA-SW-Driver DX-CBL-PC-3M0DA-SW-drivesConnect - installation helpDA-SW-USB Driver DX-COM-STICK3-KITDA-SW-drivesConnect - InstallationshilfeDA-SW-USB Driver PC Cable DX-CBL-PC-1M5Material handling applications - airports, warehouses and intra-logistics eaton-bus-adapter-rapidlink-reversing-starter-dimensions-003.epsRated operational current (Ie) at 150% overloadRated operational current (Ie) at AC-3, 380 V, 400 V, 415 V Rated operational power at 380/400 V, 50 Hz - minRated operational power at 380/400 V, 50 Hz - maxRated operational power at AC-3, 220/230 V, 50 HzRated operational power at AC-3, 380/400 V, 50 HzRated operational voltageSupply frequencySystem configuration type Rated control supply voltage (Us) at AC, 60 Hz - max Rated control supply voltage (Us) at DC - minRated control supply voltage (Us) at DC - maxRated control voltage (Uc)ConnectionNumber of auxiliary contacts (normally closed contacts) Number of auxiliary contacts (normally open contacts)Cable length10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation Brochure DisegniMeets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Is the panel builder's responsibility. The specifications for the eaton-bus-adapter-rapidlink-reversing-starter-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-003.epsETN.RAMO5-D420PNT-412RS1.edzIL034092ZUramo5_v13.stpramo5_v13.dwgGeneration change RAMO4 to RAMO5Generation change from RA-SP to RASP 4.0Generation Change RASP4 to RASP5Generation change from RA-MO to RAMO 4.0Generation Change RA-SP to RASP5Configuration to Rockwell PLC for Rapid LinkDA-DC-00003964.pdfDA-DC-00004184.pdfDA-DC-00004525.pdfDA-DC-00004523.pdf10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies10.4 Clearances and creepage distances10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections10.8 Connections for external conductors10.9.2 Power-frequency electric strength10.9.3 Impulse withstand voltage10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility eCAD modelIstruzioni di installazione mCAD modelNote per l'applicazione Report di certificazioneEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Tutti i diritti riservati. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaswitchgear must be observed.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.13 Mechanical function。
前沿报道：兔子是怎么跑到月亮上的
WIE DER HASE AUF DEN MOND KAM 兔子是怎么跑到月亮上的T ext / 文: Margrit Manz 曼玛琳Aus dem Deutschen / 中文翻译: Xiang Kai 向开10Essay 前沿报道I l l u s t r a t i o n : H a n n a J u n g Copyright ©博看网. All Rights Reserved.Copyright©博看网. All Rights Reserved.019年1月3日，中国的太空探测器嫦娥4号首次在月球背面着陆，引起巨大反响。
其上搭载的玉兔号月球车很快与母探测器嫦娥4号分离，开启了对月球环境、特别是月球南极附近艾特肯火山口地形的独立勘测。
这是一项尤为特殊的任务，因为从地球上无法与月球车建立直接通讯。
不过轰动性的发现接踵而至，比如最近玉兔号就发现了凝固的玻璃珠。
中山大学肖智勇领衔的研究小组认为，这些凝珠是月壳遭受猛烈撞击后形成的残留物，“天体物质”在撞击过程中熔融，而后留在了月球表面。
我们知道，月壳主要由长石矿物斜长岩组成，而这种含铁量很低的矿物必定是极快地熔融，方能形成大量被玉兔号发现的这类透明球形结构。
中国计划在未来数年内成为航天大国，2029年之前将在月球上建造一座永久性的载人科研基站。
新华社援引国家航ls am 3. Januar 2019 mit der Chang’e 4 erst-mals eine chinesische Raumsonde auf der abgewandten Seite des Mondes landete, war das eine Sensation. An Bord befand sich der Mond- Rover »Jadehase« (Yutu ), der schon bald seine Mutter-sonde Chang’e 4 verlassen sollte, um auf eigene Faust die Mondumgebung zu erkunden, insbesondere das Ge-lände am Aitken-Krater in der Nähe des Südpols des Mondes. Die Mission galt als besonders eigenwillig, denn von der Erde aus ist keine direkte Kommunika-tion mit dem Rover möglich. Dafür gibt es immer wie-der auf s ehenerregende Entdeckungen – wie kürzlich, als der »Jadehase« Tropfen aus erstarrtem Glas e ntdeckt hatte. Ein Forschungsteam unter der Leitung von Xiao Zhi y ong von der Sun-Yat-Sen-Universität interpretiert diese Tropfen als Überbleibsel eines heftigen E inschlags auf der Mondkruste, bei dem das »Objekt« wohl auf der Oberfläche geschmolzen sein muss. Man weiß bereits, dass die Mondkruste zu großen Teilen aus dem Feld-spat-Mineral Plagioklas besteht. Dieses eisenarme Mi-neral muss also extrem schnell geschmolzen sein, so-dass die durch den »Jadehasen« in großer Zahl auf-gespürten, transparenten Kugelstrukturen entstehenkonnten.2A12Essay 前沿报道Copyright ©博看网. All Rights Reserved.China plant, in den kommenden Jahren zur führenden Raumfahrtnation zu werden und im Zuge dessen bis 2029 eine permanente bemannte Station auf dem Mond zu errichten. Laut der staatlichen Nachrichten-agentur Xinhua, die den Chef der chinesischen Raum-fahrtbehörde, Zhang Kejian, zitiert, soll diese bereits in wenigen Jahren am Südpol des Mondes entstehen. Zur Vorbereitung darauf wurden bereits mehrere unbe-mannte, aber auch bemannte Missionen angekündigt. 2020 hatte die Nachfolge-Sonde Chang’e 5 bei ihrem Rückflug zur Erde wertvolles Mondgestein im Gepäck. Für 2024 ist Chang’e 6 geplant, für 2026 Chang’e 7.Der »Jadehase« von der 4. Mission dreht jedoch im-mer noch seine Runden auf dem Erdtrabanten und wird wohl nicht der letzte Hase auf dem Mond gewesen sein.Bei der Landung von Chang’e 5 war kurz vor dem Abhe-ben des Aufstiegsmoduls eine zwei Meter breite und 90 Zentimeter hohe Fahne gehisst worden. Erinnern wir uns: Die Fahnen der Apollo-Missionen Ende der 1960er und Anfang der 70er Jahre hatten die Astronauten noch in den Mondstaub gesteckt. Doch bei Chinas Mondmissionen steht der Flaggenmast auf einem aus-geklappten Arm der zurückgelassenen Landesonde. Eine Kamera machte eindrucksvolle Bilder von der ro-ten Fahne vor dem Mondhorizont. Bei den beiden vor-angegangenen chinesischen Mondlandungen 2013 und天局局长张克俭的介绍称，该站若干年后将在月球南极建成，作为前期准备，已公布了数项无人或载人登月计划。
RYII中文资料
1Datasheet Rev. HC1 Issued 2008/03 Dimensions are in mm unlessotherwise specified and areshown for reference purposesProduct specificationaccording to IEC61810-1.Product data, technical para-processing informationonly to be used togetherwith the'Definitions' at‘Schrack’ section.Specifications subject toEspecially suitable for resistive and inductive loads on NO and NC contactsRoHS compliant (Directive 2002/95/EC) as per product date code 0403Applications: heating control, interface technology, domestic appliances, timers,V REG.-Nr. 5358, Z E214025Contact dataContact configuration 1 CO or 1NO or 1NCContact set single contactType of interruption micro disconnectionRated current8ARated voltage/max. switching voltage AC250/400VACMaximum breaking capacity AC2000VAContact material AgNi0,15, AgSnO2, AgCdOMechanical endurance30x106cyclesRated frequency of operation with/without load 6 / 1200min-1Contact ratingsType Load CyclesRY**1***NO, 8 A, 250 VAC, resistive, 70°C1x105RY**1***NC, 8 A, 250 VAC, resistive, 70°C5x104RY**(0,1,2)***8 A, 30 VDC, UL 5083x104RY**(0,1,2)***0,28 A, 250 VDC, UL 5083x104RY**(0,1,2)***1/2 HP, 240 VDC, UL 508RY**(0,1,2)***1/4 HP, 120 VDC, UL 508RY**(0)***8 A, 415 VAC, resistive, UL 5086x103RY**(0,1,2)***Pilot duty - B300, UL 5086000RY*** ***CO, 8 A, 250 VAC, resistive, 70°C5x103RY**1 ***6(4)A, 250 VAC, 85°C, EN607301x105Coil dataRated coil voltage range DC coil 5...60VDCCoil power DC coil typ. 220mWOperative range2Coil versions,DC-coilCoil Rated Operate Release Coil Rated coilcode voltage voltage voltage resistance powerVDC VDC VDC Ohm mW00553,50,5112+10%22300664,20,6162+10%22200996,30,9320+10%253012128,41,2627+10%2300242416,82,42350+10%2450484833,64,89391+10%2450606042,06,014000+10%257All figures are given for coil without preenergization, at ambient temperature +23°COther coil voltages on requestF0142-FInsulation CO contact NO contact Dielectric strength coil-contact circuit5000V effopen contact circuit1000V effClearance/creepage coil-contact circuit W8 / 8mmMaterial group of insulation parts IIIaTracking index of relay base PTI250, PTI 175* Type of insulation coil-contact circuit reinforcedopen contact circuit functionalRated insulation voltage250V250VPollution degree 3 23Rated voltage system230V 400V230 / 400VOvervoltage category III IIIOther dataRoHS - Directive 2002/95/EC compliant as per product date code 0403 Flammability class according to UL94V-0GWT to IEC 60335-1> 750 °C**Ambient temperature range -40...+70°CAmbient temperature max.85°C at 6AOperate- / release time typ. 7 / 3msBounce time NO / NC contact typ. 2.5 / 4.5ms Vibration resistance (function) NO/NC contact20 / 5gShock resistance (function) NO/NC contact20 / 5gShock resistance (destruction) 100gCategory of protection RTII-flux proof, RTIII- wash tight** Mounting pcbMounting position anyMinimum mounting distance W 0mmSoldering heat resistance flux proof version270°C/10swash tight version260°C/5sRelay weight8gPackaging unit20 / 500pcs AccessoiresFor technical details see datasheet Accessoires RYII* reflow-solderable version** not as reflow-solderable version PCB layout / terminal assignment Bottom view on solder pins1 NO, 1 NC contact 5mmS0254-AAS0254-ABS0254-ACS0254-ADS0254-AFS0254-AEDimensionsPinning 3.2mmPinning 5mmSoldering profile for reflow-solderable version。
Staubli型号大全
史陶比尔集团（英文名：Staubli ）创立于1892年（总部位于瑞士），创立于1892年，史陶比尔集团有着100多年的发展历史，是一家在纺织机械，工业快速接头和工业机器人三大领域顶尖地位的世界知名企业。
联系人：王凯文手机：135*52*86*5878Q Q：2*8*5*0*5*9*0*5*8*6座机：010-5243*0161邮箱：2850590586@中国市场常用型号：STAUBLI SENSORDISTRIBUTOR|B27595534STAUBLI union|RCS06??N01143299Staubli 85559752/10 B-30/854502staubli RMP49.06.7102/JVstaubli RBE11.1102/IA/JV/W/ODStaubli 18.564Staubli 18.565Staubli PH08.5103/IA/MA/JVSTAUBLI SPH08.2103/IA/MA/JVSTAUBLI SPH06.2102/IA/MA/JVSTAUBLI SPH06.5102/IA/MA/JVstaubli RMI 209-12-6000-LStaubli RMI 209-12-1000-0-2-03staubli RMI 09 5102 0001 3/8"STAUBLI SBA08.1103STAUBLI SBA08.7103Staubli RBE03.7150.ODStaubli RBE03.1150.ODStaubli SPH06.1103/VB/JV/SPStaubli n00618597Staubli N00618697Staubli RPL08.1252/KRStaubli RPL08.6812/RE/KRStaubli PL08.6812/KRSTAUBLI RBE06.1151 ??IA/HPGSTAUBLI RBE06.1908 ??IA/HPGSTAUBLI RBE06.1101 ??IA/HPGStaubli RBE08.6151Staubli RCS08.1810Staubli RBE06Staubli RCS06Staubli RBE08.6151Staubli RCS08.1810Staubli RMI206.20/ASStaubli AF153.13/ICStaubli ABA15/24Staubli AIRFLEX-S13;125mStaubli ABA15/24Staubli AF153.13/ICStaubli ??AIRFLEX-S13??;75mStaubli ABA15/24Staubli RCS11.8813Staubli HJP09M006/RBE116/ERS081Staubli RBE 08.6151Staubli RBE 08.6251Staubli RBE 08.6252Staubli RBE 11.6813Staubli HJP09M006/RBE116/ERS081STAUBLI QUICKCONNECTOR|CBI09.1102/IA/JVStaubli G1/2" part no.:HPX08.1103/JV/BMB/SP X6CrNiMoTi17-12-2 Staubli G1" part no.:N01221100 type:HPX20.1105/JV/BMR/SPX6CrNiMoTi17-12-2Staubli G3/8 part no.:RBE08.1102/IA/JV/OD/3/FBX6CrNiMoTi17-12-2/Staubli G3/8 partno.:RBE08.1102/IA/JV/OD/3/FB ??X6CrNiMoTi17-12-2/staubli 13184G046Pstaubli 13149G014Pstaubli 13150G014SStaubli RBE11.1153/IC/JE/ODStaubli STA06.1101/SILStaubli SCB04.7201/IC/JK/SPStaubli SCB04.1201/IC/JK/SPSTAUBLI G1/4 RCS08.1101/VDSTAUBLI G1/4 RBE08.6151STAUBLI G1/4 RCS06.1101/VDSTAUBLI G1/4 RBE06.6101Staubli SPC12.2000/IASTAUBLI STAUBLI RMI 200.30Staubli spt 10.7657/L/CGStaubli NYLFLEX12Staubli 108099 SPT10.7103/L/CGStaubli 173150 SPT 10.1657/L/CGStaubli 173156 CGO 05.2416/L/MD/JEStaubli 173157 CGO 05.5416/L/JEStaubli 173245 CGD 05.2416/L/JEStaubli 173247 CGD 05.5416/L/JESTAUBLI CT-E1-15/B;33.4022STAUBLI CT-E1-1.5;33.4023STAUBLI CT-BP1ET;33.0541STAUBLI CT-BP1ET/0.25-0.75AU;33.0143STAUBLI 33.4005STAUBLI CT-BEG;33.4057STAUBLI CS-BT;33.5606-64STAUBLI L1-BL;33.5623STAUBLI CT-AG5;33.1065STAUBLI 33.1021staubli RBE 03.1151/OD/JVstaubli RBE 03.7151/IA/JVstaubli RBE 03.6904staubli RBE 06 1152/OD/JVstaubli RMI 16.7104/JVstaubli RMI 16.1104/JVstaubli RMI 09.7102/JVstaubli RMI 09.1102/JVSTAUBLI B27586150STAUBLI B27586148STAUBLI B27586152STAUBLI B27586151STAUBLI B27586154Staubli PML06.11001/COTStaubli RBE 03.6150staubli R600000005 G4staubli RBE11.7102/45/JEstaubli RBE11.7102/3./JEStaubli CBI06.1101/IAStaubli RMI212.20.1103/JV(with 20st G1/2 connect) Staubli RMI09.512/JVStaubli RMI20049727Staubli RMI20049700Staubli RMF 152.102Staubli RMI 200.30Staubli RMI 09.5102/JVSTAUBLI RBE11.1103/IA/JV/HPLStaubli ADS11.1105/IAStaubli HPX33.7107/JVStaubli SPX08.7103/JVStaubli SPX/PP06.7102/JVStaubli HQ-A2-316??Staubli G1-1/2 STAUBLI?? 87?? Staubli G1/2 STAUBLI?? 89?? Staubli G3/8 STAUBLI?? 90?? Staubli 30.0020 EG-TS-PG36/150 Staubli SPC08.5000/IA/JVStaubli SPC08.2000/IA/JVStaubli SPC08.2000.IA.CDJV Staubli HEL030300STAUBLI HPX 08.1103+HPX 08.7103 STAUBLI HPX 12.1104 +HPX 12.7104 STAUBLI HPX 20.1105 +HPX 20.7105 Staubli K4N002181Staubli K4N001722Staubli K4N001726Staubli K4N001724Staubli K4N00450Staubli RCS08.1816Staubli RBE11.2103Staubli RBE11.1153/IH/JNStaubli N00624312Staubli R60000226Staubli R60111313staubli NGV1 NO01021995Staubli 30.0020 EG-TS-PG36/150 Staubli RMI209.12.1104/JVStaubli RMI09.5102/JVStaubli SPC08.2000.IA.CDJV STAUBLI B27595114STAUBLI B14826136STAUBLI K81556267STAUBLI B23585429STAUBLI B23585432STAUBLI B23586459STAUBLI B23587018STAUBLI B23587078STAUBLI B24582511STAUBLI B27585266STAUBLI B27585714STAUBLI B27595113STAUBLI K81450234STAUBLI K81450235STAUBLI K81556268STAUBLI K81615043STAUBLI K85535599STAUBLI K85536099STAUBLI K86300098STAUBLI 6MTW03-001STAUBLI 6MRW03-001Staubli 103586282staubli 358 0202 ABSTAUBLI RSI 08-1152STAUBLI tuyau HEL 03.03.00 + 2 raccords HEL 03.1150 STAUBLI RBE06.1151/IC/3/FB/VD/JC/ODSTAUBLI RBE06.1151/IC/45/FB/VD/JC/ODSTAUBLI RBE06.1151/IC/6/FB/VD/JC/ODSTAUBLI RBE06.7151/IC/3/JCSTAUBLI RBE06.7151/IC/45/JCSTAUBLI RBE06.7151/IC/6/JCSTAUBLI RSI 08-1152STAUBLI REA081600001STAUBLI SBA 08.1103STAUBLI SBA 08.7103STAUBLI RBE11.6103/45STAUBLI RBE11.6103/6STAUBLI RBE11.1103/ia/6/WSTAUBLI RBE11.1103/ia/45/WSTAUBLI RBE11.7103/IASTAUBLI RBE08.7102/IA/WSTAUBLI RBE08.1102/IA/0D/WSTAUBLI RBE11.1103/IA/0DSTAUBLI RBE11.7103/IA/JESTAUBLI RBE11.1103/IA/JE/0DSTAUBLI RCS-08.1153(G1/2")STAUBLI RCS-08.8103(G1/2")STAUBLI RBE08.6153(G1/2")STAUBLI RBE08.6103(G1/2")staubli SPC05.2000/IA/JVstaubli SPC08.2000/IA/JVstaubli SPC05.5000/IA/JVStaubli B27583359,REA03.2302STAUBLI dashuai2204STAUBLI NO11.198.03Staubli RM1061JVSTAUBLI tuyau HEL 03.03.00 + 2 raccords HEL 03.1150 Staubli RMI 12.1103/JVSTAUBLI S0*******STAUBLI S0*******STAUBLI S0*******STAUBLI RBE03.1100/IA/VD/HPG/JE/OSStaubli KTDEK11 STABU-1008;connector RBE 0.6101/IC Staubli RBE03.7150/IC/JEStaubli RBE03.1904/IC/JEStaubli RBE 11.1103staubli N00628610STAUBLI RBE03.2100/IA/15/HPG/JV/ODSTAUBLI RBE03.2100/IA/75/HPG/JV/ODSTAUBLI RBE03.7100/IA/75/HPG/JVSTAUBLI RBE03.6150/HPGStaubli RBE 03Staubli CBX 09.1102/JV/BF with plugStaubli CBX 09.7102/JV/BF with plugStaubli RMI 09.1102/JV with plugStaubli RMI 09.7102/JV with plugStaubli RBE 03.1251/HPLStaubli RBE 03.6200/HPLSTAUBLI K4N000299STAUBLI K4N000301STAUBLI N00237511STAUBLI N00418810STAUBLI N00428711STAUBLI N00634412STAUBLI N00719710STAUBLI N00728607STAUBLI N00816710STAUBLI N00833607STAUBLI N00919410STAUBLI N00920509Staubli N00642408Staubli N00642308Staubli AIRFLEX08 200MStaubli REE03.1100??JV/0DStaubli REE03.7151Staubli 18.9004 plug-SP1.5/0.5-1.5AGStaubli 18.8004 socket-BP1.5/0.5-1.5Staubli 18.4604 pin carrier-E3-24PE/SStaubli 18.4704 SOCKET CARRIER-E3-24PE/BStaubli 18.0308 socket housing-MGK3VB10-14+MGK3R-M32 Staubli 18.0310 PIN HOUSING-MGK3VS10-14+MGK3R-M32Staubli 18.5618 DST-RG GR.3/14 BUstaubli N00512808staubli N00260306Staubli SPH G1/4 04.5101/MA/IA/JVSTAUBLI NO1210411STAUBLI NO0624312STAUBLI RBE-03-M10X1-S9*******Staubli HPX12.1104 G3/4Staubli HPX20.1105 G1Staubli HPX25.1106 G1 1/4Staubli RBE06.6151/IC/HPISTAUBLI RCS06.1163Staubli AIRFLEX 08 200MStaubli RBE 06.2102/0/ICJTVD SF;QUICK CHANGE BUSHING\G3/8"i DN6 STAUBLI RMI12.1153/JVSTAUBLI RMI12.7152/JVStaubli unvalved plugs rbe03 6904 (no color)Staubli unvalved plugs rbe03 6904 (blue)Staubli plug type:CBI06.7151/IA/JV/REStaubli socket type:CBI06.1810/IA/CNStaubli pipe type:CALOREL-EC10/KBStaubli MCS/MA N-FIXED PLATEStaubli MCS/MA N-MOBILE PLATE。
HAT2028R-EL-E中文资料
HAT2028R, HAT2028RJSilicon N Channel Power MOS FETHigh Speed Power SwitchingREJ03G1163-0500(Previous: ADE-208-524C)Rev.5.00Sep 07, 2005 Features• For Automotive Application (at Type Code “J”)• Low on-resistance• Capable of 4 V gate drive• High density mountingOutlineAbsolute Maximum Ratings(Ta = 25°C)Item Symbol Value UnitDrain to source voltage V DSS 60 V Gate to source voltage V GSS ±20 V Drain currentI D 4 A Drain peak currentI D (pulse) Note 132 ABody-drain diode reverse drain current I DR 4 AHAT2028R — — Avalanche current HAT2028RJ I AP Note 4 4 AHAT2028R — — Avalanche energy HAT2028RJ E AR Note 41.37 mJChannel dissipation Pch Note 22W Channel dissipation Pch Note 33 W Channel temperature Tch 150 °C Storage temperatureTstg–55 to +150°CNotes: 1. PW ≤ 10 µs, duty cycle ≤ 1% 2. 1 Drive operation: When using the glass epoxy board (FR4 40 × 40 × 1.6 mm), PW ≤ 10 s 3. 2 Drive operation: When using the glass epoxy board (FR4 40 × 40 × 1.6 mm), PW ≤ 10 s 4. Value at Tch = 25°C, Rg ≥ 50 ΩElectrical Characteristics(Ta = 25°C)Item Symbol Min Typ Max Unit Test ConditionsDrain to source breakdown voltage V (BR) DSS 60 — — V I D = 10 mA, V GS = 0 Gate to source breakdown voltage V (BR) GSS ±20 — — V I G = ±100 µA, V DS = 0 Gate to source leak current I GSS — — ±10 µA V GS = ±16 V, V DS = 0HAT2028R I DSS — — 1 µA Zero gate voltage drain currentHAT2028RJ I DSS — — 0.1 µA V DS = 60 V, V GS = 0 HAT2028R I DSS — — — µA Zero gate voltage drain currentHAT2028RJ I DSS — — 10 µAV DS = 48 V, V GS = 0Ta = 125°CGate to source cutoff voltageV GS (off) 1.3 — 2.3 V V DS = 10 V, I D = 1 mAR DS (on) — 0.08 0.1 Ω I D = 2 A, V GS = 10 V Note 5Static drain to source on state resistance R DS (on) —0.12 0.16 Ω I D = 2 A, V GS = 4 V Note 5Forward transfer admittance |y fs | 3.3 5 — S I D = 2 A, V DS = 10 V Note 5Input capacitance Ciss — 280 — pF Output capacitanceCoss—150—pFReverse transfer capacitance Crss — 55 — pFV DS = 10 V V GS = 0 f = 1 MHzTurn-on delay time t d (on) — 15 — nsRise timet r — 100 — ns Turn-off delay timet d (off) — 35 — nsFall timet f — 45 — nsV GS = 4 V, I D = 2 A, V DD ≅ 30 V Body-drain diode forward voltage V DF — 0.88 1.15 V I F = 4 A, V GS = 0 Note 5Body-drain diode reverse recovery time t rr— 40 — ns I F = 4 A, V GS = 0di F /dt = 50 A/µsNote: 5. Pulse testMain CharacteristicsPackage DimensionsOrdering InformationPart Name Quantity Shipping Containerpcs TapingHAT2028R-EL-E 2500HAT2028RJ-EL-E 2500pcs TapingNote: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product. RENESAS SALES OFFICESRefer to "/en/network" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong KongTel: <852> 2265-6688, Fax: <852> 2730-6071Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, TaiwanTel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999Renesas Technology (Shanghai) Co., Ltd.Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, ChinaTel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632Tel: <65> 6213-0200, Fax: <65> 6278-8001Renesas Technology Korea Co., Ltd.Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, KoreaTel: <82> 2-796-3115, Fax: <82> 2-796-2145Renesas Technology Malaysia Sdn. Bhd.Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, MalaysiaTel: <603> 7955-9390, Fax: <603> 7955-9510。
埃德尔空氣刀34 Torches PT-32EH PLASMARC TORCH说明书
34PT -32EH PLASMARC ™ TORCHPT-32 EH TorchDesigned for superior cutting performance and ease ofhandling, the PT -32EH patented torch produces clean, excep-tionally high quality cuts. The new ergonomic handle offers dual-switch capability, extra comfort and a non-slip grip.⏹ Most compact 90 amp torch on the market⏹ New, durable torch cable prevents snagging on fixtures and materials⏹ Excellent cutting capacity—cuts up to 1-1/2 in. (38 mm)⏹ Uses shop air, cylinder air or nitrogen for superior versatility⏹ Pilot arc starting—even starts through paint⏹ Choice of 25 ft. (7.6 m) or 50 ft. (15.2 m) line length ⏹ Excellent consumable life ⏹ Parts in place design⏹ Patented torch and safety circuit ⏹ Exclusive 40 amp Drag Nozzle ⏹ One-year warrantySpecificationsCuts up to 1-1/2 in. (38 mm)Current Capacity .......................................90 A @ 100% duty cycle Air Supply ..........Length of Service Lines ...................25 ft. (7.6 m) or 50 ft. (15.2 m)DimensionsOverall Length .................................................8.2 in. (208 mm) Length of Head ..................................................3.0 in. (76 mm)ConsolesPowerCut ® 875, PowerCut ® 1125, PowerCut ® 1250, and PowerCut ®1500Ordering InformationPT -32EH, 90°, 25 ft. (7.6 m) line ............................... 0558003548PT -32EH, 90°, 50 ft. (15.2 m) line ............................. 0558003549Torches and torch body assemblies are supplied without electrode, nozzle, heat shield and valve pin. Order individual components shown with PT-32EH parts breakdown following.Instruction Literature, PT -32 ..............................................F-15-440Instruction Literature, PT -32EH .........................................F-15-747Sales Literature, order number (PT -32EH) .....................PAC-21091PT -32EH CUTTING SPEEDSOUTPUT CURRENT 60, 70 & 90AMPS w/AIR @ 75psi (5.2bar)Optional Accessories50/70 amp Spare Parts Kit (PC-875 “CE”) ...............0558********/70 amp Spare Parts Kit (PC-875/1125) ..............0558******** amp Spare Parts Kit (PC-1250) ...........................0558******** amp Spare Parts Kit (PC-1250) “CE” ..................0558******** amp Spare Parts Kit (PC-1500) ......................0558******** amp Spare Parts Kit (PC-1500) “CE” ..................0558003557Plasma Flow Measuring KitThis valuable troubleshooting tool allows measurement ofthe actual plasma gas flow through the torch ....................19765Torch Guide KitThis complete kit, in a rugged plastic carrying case, includes attachments for circle and straight line cutting on ferrous and non-ferrous metals.Deluxe: 1-3/4 in. (44.5 mm) - 42 in. (106 cm) Radius 0558003258 Basic: 1-3/4 in. (44.5 mm) - 28 in. (71 cm) Radius ..0558002675Stand-off GuideFor proper stand-off distance when drag cutting .........0558******** amp Drag Nozzle ................................................ 0558002908Gouging Nozzle .......................................................0558003089Heat Shield Gouging .............................................. 0558003090Heat Shield Long “CE” ............................................0558003110Drag Heat ShieldMetal feet built into heat shield allows accurate standoffdistance for drag cutting ..........................................0558003374Heavy Duty Drag Heat ShieldSuitable for piercing and heavy industrial use (0558004206)35consumables and 75psi Ai Aluminum40 A 60 A 70 A90 AThickness Cut Cut CutCutSpeed (ipm)Speed (ipm)Speed (ipm)Speed (ipm)0.06252000.1251100.250481301481880.500144465760.7503339411.0001825301.250516211.5001015All cut data performed using standard production consumables and 75psi AirAll cut data performed using standard production consumables and 75 psi (5.2 bar) Air C u t S p e e d - I P M (m m / m i n )All cut data performed using standard production consumables and 75 psi (5.2 bar) AirC u t S p e e d - I P M (m m / m i n )1.000812141.250581.5005All cut data performed using standard production consumables and 75psi Air 1.0001014181.25057121.50058All cut data performed using standard production consumables and 75psi Air All cut data performed using standard production consumables and 75 psi (5.2 bar) Air C u t S p e e d - I P M (m m / m i n )PT -32EH PLASMARC ™ TORCH36PT -32EH PLASMARC ™ TORCHHeat Shield 0558001957Long Heat Shield “CE”0558003110Valve Pin0558001959O-Ring - 85W51(Supplied with head)Electrode 0558001969Nozzle40 AMP - 0558002908 (Drag Cutting)*50/70 AMP - 0558002618 (PC-875, PC-1125, & PC-1250)90 AMP - 0558002837 (PC-1500 Only)*PC-875, PC-1125, 1250, & PC-1500PT -32EH Torch Head - 0558003412Drag Heat Shield 0558003374(Optional)Heavy Duty Drag Heat Shield 0558004206(Optional)Heat Shield Long 0558003110 - 2 - 2 - 2 Heat Shield 0558001957 2 - 2 - 2 -50/70 amp Nozzle 0558002618 4 4 4 4 - -90 amp Nozzle 0558002837 - - - - 4 440 amp drag Nozzle 0558002908 1 1 1 1 1 1Electrode 0558001969 3 3 3 3 3 3Valve Pin 0558001959 1 1 1 1 1 1Fuse 2 amp, 600vdc 0558003075 - - 1 1 1 1Stand-off Guide 0558002393 1 1 1 1 1 1Wrench 19129 1 1 1 1 1 1Lubricant 17672111111Note: “CE” Items are used outside North AmericaSwitch 18224™™67Recommended Cutting GasesCompressed Air is the most commonly used gas for lower current plasma cutting and works well for most metals from gauge thickness to 1 in. (25.4 mm). It leaves an oxidized cut surface. Compressed air can also be used for plasma gouging on carbon steel.Nitrogen is often used for higher current plasma systems and for cutting materials up to 3 in. (76.2 mm) thick. It produces excellent quality cuts on most materials.Oxygen is used when the highest quality mechanized cuts are desired on carbon steel up to 1-1/4 in. (31.75 mm) thick. The cut face is smooth, and dross is easy to remove. Oxygen can also be used on stainless steel and aluminum, but it produces a rougher cut face.Argon-Hydrogen Mixtures are generally used for cutting stainless steel and aluminum. They produce a clean, high quality cut face. Argon-Hydrogen is required for mechanized cutting of any material more than 3 in. (76.2 mm) thick. This mixture also provides an excellent gas for plasma gouging on all materials.1300Plasmarc ™ Cutting Package CapabilitiesI n c h e s /m m C a r b o n S t e e l4(101.6 mm)3.5(88.9 mm)00.5(12.7 mm)1(25.4 mm)1.5(38.1 mm)2(50.8 mm)2.5(63.5 mm)3(76.2 mm)Plasma ®1256508751600PackPlasma ®380Plasma ®550Plasma ®25060PLASMARC™ ACCESSORIESPlasma FlowMeasuring KitPlasmitw/TorchTorch Guide Kits■Includes attachments for circle and straight linecutting on ferrous and non-ferrous metals■For additional information, order literature numberEMB-1074 (Deluxe Kit) and/or EMB-1075 (Basic Kit)Adaptor for PT-17AM andPT-20AMX Torches⏹Adapts PT-17AM torch to PCM-875 andPCM-1125 console for manual cutting⏹Adapts PT-17AM/PT-20AM torches to PCM-875and PCM-1125 consoles for mechanized cutting90°Head Angle Converter Kit forPT-27/23 Torch⏹Fits between handle and head of torch⏹Gives the effect of a 90° angle torch headPlasma Flow Measuring Kit⏹Valuable troubleshooting tool⏹Allows measurement of actual plasma gas flowthrough torchRemote Hand Switch⏹Allows the operator to start and stop the cuttingprocess with a remote switch.⏹Used primarily for mechanized cutting and isincluded in the mechanized Plasmarc packagesTorch Retrofit Kits⏹Allow select ESAB Plasmarc torches to beretrofitted to other brand plasma consoles⏹Do not include the torch, which must be purchasedseparatelyLeather Sheath⏹A 10 ft. (3 m) leather sheath to protect torch leadsfrom abrasion and molten metal⏹Particularly recommended for plasma gougingPlasmits⏹Special flexible shields attach around the head of aplasma cutting torch to provide added protectionagainst heat and molten metal⏹Recommended for heavy duty plasma gougingapplicationsTorch Wrap & Kit Holder⏹This enables operator to store spare parts kit, wraptorch and work cable for easy transport and storageWheel Kit⏹This enables easy transport of the PCM-500i,PCM-875 and PCM-1125 Series; and PowerCut®875/1125 and PowerCut® 1250/1500 Series MachinesDeluxeTorch GuideKitBasic TorchGuide KitTorch Wrap and Kit HolderPowerCut® MachinesWheel KitPowerCut® MachinesOrdering InformationT orch Wrap and Kit Holder, PCM Series.................................33952GYT orch Wrap and Kit Holder, PowerCut® 875/1125 (0558003013)Torch Wrap and Kit Holder, PowerCut® 1250/1500 (0558003059)Torch Wrap & Kit Holder PowerCut® 650 (0558003398)Wheel Kit PowerCut® 650 (0558003399)Wheel Kit, PCM Series (34324)Wheel Kit, PowerCut® 875/1125 (0558003014)Wheel Kit, PowerCut® 1250/1500 (0558003060)Torch Guide Kit for PT-17, 23/27, 25, 31/34 & PT-32EH Torches(Deluxe: 1-3/4 in. (44.45 mm) - 42 in. (106.7 cm) Radius) 0558003258PT-17 Bushing ...........................................................................TJ2226PT-23/27 Bushing ......................................................................TJ2225PT-25 Bushing ...........................................................................TJ2230PT-31XL Bushing .......................................................................TJ2228PT-32 Bushing (0558003257)Torch Guide Kit for PT-27/31XL/34/32 Torch(Basic: 1-3/4 in. (44.45 mm) - 28 in. (71 cm) Radius) (0558002675)90° Angle Converter Kit for PT-27 (000222)Plasma Flow Measuring Kit (19765)Remote Hand Switch PT-20AMX (680982)Remote Hand Switch ESP-150 and ESP-200 (2075600)Remote Hand Switch PT-21AMX (0558003612)Retrofit Kit to adapt PT-17A to PAK5XR/P AK10XR (31548)Retrofit Kit to adapt PT-31XL/ PT-27 to MAX-40 (18228)10 Ft. Leather Sheath with Snaps(For use with any ESAB Plasmarc torch) (20812)Plasmit for PT-17A Manual Torch (20803)Plasmit for PT-121, 75° T orch (20742)Plasmit for PT-121/PT-25, 90° T orch (20801)Plasmit for PT-121, Mechanical T orch (20802)Plasmit for PT-251, 75° Torch (20805)Plasmit for PT-26 70° Torch (0558006717)Plasmit for PT-26 90° Torch (0558006718)Plasmit for PT-251 Mechanical T orch (20807)Adaptor for PT-17A & PT-20AMX on PCM-875 & PCM-1125 (19500)。
Alpha Wire Ecowire TM 6829 14AWG (2.00MM2) 110C 30
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207Tel: 1-800-52 ALPHA (25742), Web: Customer SpecificationPART NO. 6829ConstructionDiameters (In)1) Component 1 1 X 1 HOOKUPa) Conductor14 (19/27) AWG BC0.071b) Insulation 0.012" Wall, Nom. Modified PolyphenyleneEther0.095+/- 0.002(1) Print ALPHA WIRE ECOWIRE TM P/N 6829 14AWG (2.00MM2) 110C 300V ROHS CE(2) Color(s)WHITE, BLACK, RED, GREEN, YELLOW, BLUE, BROWN ORANGE, GREEN/YELLOWApplicable Specifications1) Other Halogen-FreeSuitable for ISO 672260 V RMS2) CE:LVD 73/23/EEC Amendment 93/68/EECEnvironmental1) EU Directive 2002/95/EC(RoHS):All materials used in the manufacture of this part are in compliance with EU Directive2002/95/EU regarding the restriction of use of certain hazardous substances in electrical andelectronic equipment. Consult Alpha Wire's web site for compliance Date of Manufacture.2) REACH Regulation (EC 1907/2006):This product does not contain Substances of Very High Concern (SVHC) listed on the EuropeanUnion's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information,please see Alpha's REACH SVHC Declaration.PropertiesPhysical & Mechanical Properties1) Temperature Range-40 to 110°C2) Bend Radius10X Cable Diameter3) Pull Tension30 Lbs, MaximumElectrical Properties(For Engineering purposes only)1) Voltage Rating300 V RMS2) Inductance0.03 µH/ft, Nominal3) Conductor DCR 2.8 /1000ft @20°C, NominalOtherPackaging Flange x Traverse x Barrel (inches)a) 1000 FT9 x 4.5 x 3.5 Continuous lengthb) 100 FT 3.75 x 2 x 1.75 Continuous lengthc) Bulk(Made-to-order)[Spool dimensions may vary slightly]Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207Tel: 1-800-52 ALPHA (25742)Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication, information and specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not ensure product availability.Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever, even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207Tel: 1-800-52 ALPHA (25742), Web: RoHS CERTIFICATE OF COMPLIANCETo Whom It May Concern:Alpha Wire Part Number:68296829, RoHS-Compliant Commencing With6/10/2011ProductionThis document certifies that the Alpha part numbers cited above are manufactured in accordancewith Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003,better known as the RoHS Directives, with regards to restrictions of the use of certain hazardoussubstances used in the manufacture of electrical and electronic equipment. The reader is referredto these Directives for the specific definitions and extents of these Directives. No Exemptions arerequired for RoHS Compliance on this item.Substance Maximum Control ValueLead0.1% by weight (1000 ppm)Mercury0.1% by weight (1000 ppm)Cadmium0.01% by weight (100 ppm)Hexavalent Chromium0.1% by weight (1000 ppm)Polybrominated Biphenyls (PBB)0.1% by weight (1000 ppm)Polybrominated Diphenyl Ethers (PBDE)Including Deca-BDE0.1% by weight (1000 ppm)The information provided in this document and disclosure is correct to the best of Alpha Wire'sknowledge, information and belief at the date of its release. The information provided is designedonly as a general guide for the safe handling, storage, and any other operation of the productitself or the one that it will become part of. The intent of this document is not to be considered awarranty or quality specification. Regulatory information is for guidance purposes only. Productusers are responsible for determining the applicability of legislation and regulations based ontheir individual usage of the product.Authorized Signatory for the Alpha Wire Company:Dave Watson, Director of Engineering & QA11/1/2012。
Whelen 14544 (111411) ligt 高压 燃烧防护 盒部件 中文名称说明书
©2011 Whelen Engineering Company Inc.Form No.14544 (111411)For warranty information regarding this product, visit /warranty•Proper installation of this product requires the installer to have a good understanding of automotive electronics, systems and procedures.•Whelen Engineering requires the use of waterproof butt splices and/or connectors if that connector could be exposed to moisture.•Any holes, either created or utilized by this product, should be made both air- and watertight using a sealant recommended by your vehicle manufacturer.•Failure to use specified installation parts and/or hardware will void the product warranty.•If mounting this product requires drilling holes, the installer MUST be sure that no vehicle components or other vital parts could be damaged by the drilling process. Check both sides of the mounting surface before drilling begins. Also de-burr the holes and remove any metal shards or remnants. Install grommets into all wire passage holes.•If this manual states that this product may be mounted with suction cups, magnets, tape or Velcro®, clean the mounting surface with a 50/50 mix of isopropyl alcohol and water and dry thoroughly.•Do not install this product or route any wires in the deployment area of your air bag. Equipment mounted or located in the air bag deployment area will damage or reduce the effectiveness of the air bag, or become a projectile that could cause serious personal injury or death. Refer to your vehicle owner’s manual for the air bag deployment area. The User/Installer assumes full responsibility to determine proper mounting location, based on providing ultimate safety to all passengers inside the vehicle.•For this product to operate at optimum efficiency, a good electrical connection to chassis ground must be made. The recommendedprocedure requires the product ground wire to be connected directly to the NEGATIVE (-) battery post (this does not include products that use cigar power cords).•If this product uses a remote device for activation or control, make sure that this device is located in an area that allows both the vehicle and the device to be operated safely in any driving condition.•Do not attempt to activate or control this device in a hazardous driving situation.•This product contains either strobe light(s), halogen light(s), high-intensity LEDs or a combination of these lights. Do not stare directly into these lights. Momentary blindness and/or eye damage could result.•Use only soap and water to clean the outer lens. Use of other chemicals could result in premature lens cracking (crazing) and discoloration. Lenses in this condition have significantly reduced effectiveness and should be replaced immediately. Inspect and operate this product regularly to confirm its proper operation and mounting condition. Do not use a pressure washer to clean this product.•It is recommended that these instructions be stored in a safe place and referred to when performing maintenance and/or reinstallation of this product.•FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT OR VEHICLE AND/OR SERIOUS INJURY TO YOU AND YOUR PASSENGERS!A u t o m o t i v e : Warnings to InstallersWhelen’s emergency vehicle warning devices must be properly mounted and wired in order to be effective and safe. Read and follow all of Whelen’s written instructions when installing or using this device. Emergency vehicles are often operated under high speed stressful conditions which must be accounted for when installing all emergency warning devices. Controls should be placed within convenient reach of the operator so that they can operate the system without taking their eyes off the roadway. Emergency warning devices can require high electrical voltages and/or currents. Properly protect and use caution around live electrical connections.Grounding or shorting of electrical connections can cause high current arcing, which can cause personal injury and/or vehicle damage, including fire. Many electronic devices used in emergency vehicles can create or be affected by electromagnetic interference. Therefore, after installation of any electronic device it is necessary to test all electronic equipment simultaneously to insure that they operate free of interference from other components within the vehicle. Never power emergency warning equipment from the same circuit or share the same grounding circuit with radio communication equipment. All devices should be mounted in accordance with the manufacturer’s instructions and securely fastened to vehicle elements of sufficient strength to withstand the forces applied to the device. Driver and/or passenger air bags (SRS) will affect the way equipment should be mounted. This device should be mounted by permanent installation and within the zones specified by the vehicle manufacturer, if any. Any device mounted in the deployment area of an air bag will damage or reduce the effectiveness of the air bag and may damage or dislodge the device. Installer must be sure that this device, its mounting hardware and electrical supply wiring does not interfere with the air bag or the SRS wiring or sensors. Mounting the unit inside the vehicle by a method other than permanent installation is not recommended as unit may become dislodged during swerving; sudden braking or collision. Failure to follow instructions can result in personal injury. Whelen assumes no liability for any loss resulting from the use of this warning device. PROPER INSTALLATION COMBINED WITH OPERATOR TRAINING IN THE PROPER USE OF EMERGENCY WARNING DEVICES IS ESSENTIAL TO INSURE THE SAFETY OF EMERGENCY PERSONNEL AND THE PUBLIC.Warnings to UsersWhelen’s emergency vehicle warning devices are intended to alert other operators and pedestrians to the presence and operation of emergency vehicles and personnel. However, the use of this or any other Whelen emergency warning device does not guarantee that you will have the right-of-way or that other drivers and pedestrians will properly heed an emergency warning signal. Never assume you have the right-of-way. It is your responsibility to proceed safely before entering an intersection, driving against traffic, responding at a high rate of speed, or walking on or around traffic lanes. Emergency vehicle warning devices should be tested on a daily basis to ensure that they operate properly. When in actual use, the operator must ensure that both visual and audible warnings are not blocked by vehicle components (i.e.: open trunks or compartment doors), people, vehicles, or other obstructions. It is the user’s responsibility to understand and obey all laws regarding emergency warning devices. The user should be familiar with all applicable laws and regulations prior to the use of any emergency vehicle warning device. Whelen’s audible warning devices are designed to project sound in a forward direction away from the vehicle occupants. However, because sustained periodic exposure to loud sounds can cause hearing loss, all audible warning devices should be installed and operated in accordance with the standards established by the National Fire Protection Association.Safety FirstThis document provides all the necessary information to allow your Whelen product to be properly and safely installed. Before beginning the installation and/or operation of your new product, the installation technician and operator must read this manual completely. Important information is contained herein that could prevent serious injury or damage.WARNING: This product can expose you to chemicals including Methylene Chloride which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to .Installation Guide:Inner Edge® Traffic Advisor™ Series Lo-Profile Rear Deck Interior Lightbar2011 Dodge Charger51 Winthrop RoadChester, Connecticut 06412-0684Phone: (860) 526-9504Internet: Salese-mail:*******************CustomerServicee-mail:*******************®ENGINEERING COMPANY INC.IMPORTANT!Do not install this product or route any wires in the air bag deployment zone of your vehicle. Equipment mounted or located in air bag deployment zones will damage or reduce the effectiveness of the air bag, or become a projectile that could cause serious personal injury or death. Refer to your vehicle owners manual to learn the air bag deployment zones for the vehicle. The User/Installer assumes full responsibility to determine proper mounting location, based on providing ultimate safety to all passengers inside the vehicle.Installation:IMPORTANT! The lightbar should be located a minimum of 16" from any radio antennas!1.On the rear deck, locate the driver-side outboard cap covering the childrestraint strap holder. Remove this cover to access the tether strap holder.2.For the next step you must remove the plastic panel located inside thetrunk to access the bottom side of the child restraint brackets. This panel is held on with christmas tree plugs and magnets.3.Locate the driver-side lightbar mounting bracket included with themounting kit. Secure the mounting bracket onto the strap holder using the hardware shown (Fig. 1). Tighten the hardware firmly.4.Repeat steps 1 thru 3 for the Passenger-side mounting bracket thenreplace the plastic panel you removed in step 2.5.Position the lightbar onto the rear deck. Secure the lightbar to themounting brackets using the hardware shown. Do not tighten this hardware yet.Make sure that the rubber window seal on the lightbar housing fully engages the rear window. To ensure this, hold the lightbar housing firmly against the glass while tightening the hardware securing lightbar to mounting bracket.While still maintaining pressure on the lightbar, tighten the hardware used to secure lightbar mounting bracket to the child restraint holder.The lightbar should maintain the seal against the windshield when the pressure is released. If not, loosen the appropriate hardware and repeat this tightening procedure until properly mounted.6.Route the input cable to your control head (refer to the installation manualincluded with your control head for important mounting and wiring information).IMPORTANT!When routing the lightbar cable, it is left to the installation technician's discretion to select a path for these cables that will both protect the cables from possible damage and not interfere with the operation of any other vehicle components or equipment. Refer to the instructions included with your switches for switch wiring information.Wiring and Operation:WARNING!All customer supplied wires that connect to the positive terminal of the battery must be sized to supply at least 125% of the maximum operating current and FUSED at the battery to carry that load. DO NOT USE CIRCUIT BREAKERS WITH THIS PRODUCT!BLACK - GroundExtend and connect the BLK wire to the ground terminal of the vehicle battery. RED - Main PowerRoute the RED wire to an unused, ignition-controlled circuit fused @ 10 Amps. Do not connect to this circuit yet.NOTE: When this product is wired as outlined here, the lightbar will not function until the ignition switch is in the ON, RUN or ACC position.WHT-ORG - Scan-Lock™ Flash patternsWhen the TA feature is active, this wire will select TA patterns; when the end flasher feature is active, this wire will select the end flasher patterns. Do not use Scan-Lock while both features are simultaneously active.TO CYCLE THROUGH ALL PATTERNS: Apply +12 volts to the WHT/ ORG wire for less than 1 second and release to cycle forward. Apply +12 volts for more than 1 second and release to cycle backward.TO SET A PATTERN AS DEFAULT: When the desired pattern is displayed, allow it to run for more than 5 seconds. The TA will now displaythis pattern when active.TO RESET TO THE FACTORY DEFAULT PATTERN: Turn off power, apply +12 volts to the WHT/ORG wire, then turn power on.A Normally Open Momentary Switch is best for this circuit. Fuse @1A.Scan-Lock End Flasher Patterns:1. SignalAlert™ 4. SingleFlash 752. CometFlash® 5. ActionFlash™3. SingleFlash 375 6. A ctionScan™Traffic Advisor Patterns:1. Sequence to Solid 3. 1-Lamp TripleFlash™2. Seq. On/Seq. Off 4. 2-Lamp TripleFlashWHT/GRN - Low Power OperationFor low power operation apply +12VDC to the WHT/GRN wire. The unit will continue to operate in Low Power mode until this voltage is removed.A SP/ST switch is best suited for this circuit. Fuse this wire @1A. BROWN - End FlashersApplying +12VDC to this wire activates the end flashers. A SP/ST switch is best suited for this circuit. Fuse this wire @1A.BLUE - TA FlashWhen +12VDC is applied to this wire, the Traffic Advisor™ lightbar function becomes active. A SP/ST switch is best suited for this circuit. Fuse this wire @1A.ORANGE - LeftWhen +12VDC is applied to this wire, the lights sweep from right to left. A SP/ST switch is best suited for this circuit. Fuse this wire @1A.WHITE/BLACK - RightWhen +12VDC is applied to this wire, the lights sweep from left to right. A SP/ST switch is best suited for this circuit. Fuse this wire @1A.NOTE: If you apply power to both the WHT/BLK and ORG wires simultaneously, you will get a split pattern. Both sides will start at the center and sweep outward.。
方形亥姆霍兹线圈
方形亥姆霍兹线圈
方形亥姆霍兹线圈是一种常见的电子元件，它能用于调节电流、存储能量和控制各种电子设备，是电子产业中不可或缺的元器件，广泛用于汽车、家用电器、医疗器械、通讯设备等产品的研发、生产和应用。
一般来说，方形亥姆霍兹线圈由铁芯、铝带、塑料套和绝缘涂层组成，铁芯用于将电流导致磁场，铝带则用于携带电流，塑料套是保护线圈的外壳，绝缘涂层则可以抑制绝缘损耗和干扰电磁辐射。
方形亥姆霍兹线圈有很多种规格和参数，其中有芯子宽度、铝带宽度、铁芯厚度、芯子绕数、内径和外径。
芯子宽度决定了线圈层数，通常芯子宽度大于铝带宽度，铝带宽度和厚度决定了线圈的电阻，而芯子绕数，内径和外径则决定线圈的容积和形状。
根据不同的应用需求，方形亥姆霍兹线圈的参数可以调节，以满足电流、电流峰值和频率等特定要求；同时，可以根据结构参数来改变电感的值，以满足更复杂的电流要求。
此外，在设计时，还可以选择一些特殊材料，以提升线圈的可靠性和性能，比如使用低损耗、低热变形率、高电压等特殊材料，以及阻燃、耐化学溶剂等材料，以适应不同的工作环境。
另外，在线圈装配上也有不少需要注意的地方，比如线圈与线圈之间的接缝要平整、稳固，电气连接头要牢固等，这些都是线圈在高温、潮湿环境下正常工作的必要条件。
总的来说，方形亥姆霍兹线圈的设计工作相当复杂，需要综合考
虑材料、参数和装配工艺等，以满足不同应用环境下的需求。
如果能在材料、结构和工艺上多做研究，这种线圈的性能可以得到进一步提升，使其在更复杂的应用中起到更好的作用。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
HAT2029R
Silicon N Channel Power MOS FET
High Speed Power Switching
REJ03G1164-0600
(Previous: ADE-208-525D)
Rev.6.00
Sep 07, 2005 Features
• Low on-resistance
• Capable of 2.5 V gate drive
• Low drive current
• High density mounting
Outline
Absolute Maximum Ratings
(Ta = 25°C)
Item Symbol Value Unit
Drain to source voltage V DSS 28 V Gate to source voltage V GSS ±12 V Drain current
I D 7.5 A Drain peak current
I D (pulse) Note 1
60 A
Body-drain diode reverse drain current I DR 7.5 A Channel dissipation Pch Note 2 2
W Channel dissipation Pch Note 3
3 W Channel temperature Tch 150 °C Storage temperature
Tstg
–55 to +150
°C
Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1% 2. 1 Drive operation: When using the glass epoxy board (FR4 40 × 40 × 1.6 mm), PW ≤ 10 s 3. 2 Drive operation: When using the glass epoxy board (FR4 40 × 40 × 1.6 mm), PW ≤ 10 s
Electrical Characteristics
(Ta = 25°C)
Item Symbol Min Typ Max Unit Test Conditions
Drain to source breakdown voltage V (BR) DSS 28 — — V I D = 10 mA, V GS = 0 Gate to source breakdown voltage V (BR) GSS ±12 — — V I G = ±100 µA, V DS = 0 Gate to source leak current I GSS — — ±10 µA V GS = ±10 V, V DS = 0 Zero gate voltage drain current I DSS — — 1 µA V DS = 28 V, V GS = 0 Gate to source cutoff voltage
V GS (off) 0.4 — 1.4 V V DS = 10 V, I D = 1 mA R DS (on) — 0.025 0.033 Ω I D = 4 A, V GS = 4 V Note 4
Static drain to source on state resistance R DS (on) — 0.031 0.043 Ω
I D = 4 A, V GS = 2.5 V Note 4
Forward transfer admittance |y fs | 9.5 15 — S I D = 4 A, V DS = 10 V
Note 4
Input capacitance
Ciss — 780 — pF Output capacitance
Coss — 470 — pF
Reverse transfer capacitance Crss — 190 — pF V DS = 10 V
V GS = 0 f = 1 MHz Turn-on delay time t d (on) — 20 — ns Rise time
t r — 170 — ns Turn-off delay time t d (off) — 140 — ns
Fall time
t f — 170 — ns
V GS = 4 V, I D = 4 A, V DD ≅ 10 V Body-drain diode forward voltage
V DF — 0.88 1.15 V I F = 7.5 A, V GS = 0 Note 4
Body-drain diode reverse recovery time t rr — 65 — ns I F = 7.5 A, V GS = 0
di F /dt = 20 A/µs
Note: 4. Pulse test
Main Characteristics
Package Dimensions
Ordering Information
Part Name Quantity Shipping Container
HAT2029R-EL-E 2500
pcs Taping
Note: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product.
RENESAS SALES OFFICES
Refer to "/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> 2-796-3115, Fax: <82> 2-796-2145
Renesas Technology Malaysia Sdn. Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510。