DS33X162DK中文资料
欧姆龙-3G3MX2变频器介绍
• •
1）V/f控制基本实现方法
PWM脉冲宽度调制方法（Pulse width Modulation） 利用参考电压U与载频三角波U互相比较，来决定主功率器件的导通时 间，实现调压。脉冲宽度调制是利用相当于基波分量的信号波对三角载 波进行调制，达到调节输出脉冲度的一种方法。
•
• • •
2) V/f控制方式的缺点
•STO2(GS2) •EDM
•安全端子 输入输出 •安全开关 •(紧急停止) •安全开关 •(紧急停止)
•・STO：Safe Torque Off •・EDM：External Device Monitor
欧姆龙武汉
•配备丰富的通信・外部端口！ •可以做设定数据的收发信、频率等监 控
•CX-DRIVE
欢迎参加 OMRON 交流会
MX2变频器介绍
免费技术咨询：4008204535
欧姆龙武汉
• 一、变频器基本原理
•
异步电动机的调速能力
•
交流电机弱磁调速概念
•
V/F矢量控制调速方式
欧姆龙武汉
1、异步电动机的调速原理
异步电机的轴转速为： • n=60×f1×(1- S)/p • f1 -----定子频率 • S -----异步电动机转差率 • p -----磁极对数 • 可见，改变电动机定子侧供电电源频率，即可改变其同步转速，实现分级 调速的目的。
欧姆龙武汉
• MX2-z 商品产品线
•MX2产品的输入电压有单相200V、三相200V和三相380V三种规格，具体 功率范围如下表。
•【补充说明】 MX2-Z为中国生产品，与全球品（日本产）是完全相同的规格。 全球品里，也有三相200V：0.1～15kW (11机种)的产品，OEZ也可以进行销售。（但是，是要 从日本进口）
dk32 遥控器用户手册说明书
DK32遥控器用户手册非常感谢您购买我司产品。
DK32是一款优秀的无线电遥控接收系统，采用先进的SHTT数字跳频技术，专业、智能、通用。
为了共同维护飞行安全，也为了您能更好地使用本系统，请务必仔细阅读本手册。
如果您在使用本系统过程中遇到任何问题，请查阅本手册相关条目或者访问思翼科技官方网站（）上与本系统相关的专题页面。
您也可以直接电话咨询思翼科技售后服务热线（400 838 2918）或邮件询问技术支持邮箱（****************）。
目录1 阅读提示.......................................................................................................................................................-5 -1.1 标识符号的含义.....................................................................................................................................-5 -1.2 飞行安全................................................................................................................................................-5 -1.3 DK32遥控器充电注意事项....................................................................................................................-7 -1.4 关于使用SD存储卡的注意事项...........................................................................................................-7 -1.5 携带、保管、废弃的注意事项..............................................................................................................-8 -2 产品介绍.......................................................................................................................................................-9 -2.1 产品特性................................................................................................................................................-9 -2.2 DK32遥控器部件介绍.........................................................................................................................-12 -2.2.1 示意图...........................................................................................................................................-12 -2.2.2 开关类型.......................................................................................................................................-15 -2.2.3 数字微调介绍................................................................................................................................-16 -2.3 技术参数..............................................................................................................................................-17 -2.4 LED指示灯定义...................................................................................................................................-18 -3 使用前.........................................................................................................................................................-19 -3.1 正确放置遥控器天线...........................................................................................................................-19 -3.1.1 遥控器天线角度示意图................................................................................................................-21 -3.1.2 天空端天线角度示意图................................................................................................................-22 -3.2 给DK32遥控器充电...........................................................................................................................-23 -3.3对频......................................................................................................................................................-24 -3.4 选择遥控器油门杆类型 (26)4 主菜单界面介绍.........................................................................................................................................-27 -5 模型设置.....................................................................................................................................................-29 -5.1 舵量显示..............................................................................................................................................-31 -5.2 模型选择..............................................................................................................................................-31 -5.2.1 选择模型及步骤............................................................................................................................-31 -5.2.2 重命名模型及步骤........................................................................................................................-32 -5.2.3 复制模型及步骤............................................................................................................................-34 -5.2.4 重置模型及步骤............................................................................................................................-35 -5.3.1 如何设置模型类型？....................................................................................................................-37 -5.3.2 一键配置植保机参数....................................................................................................................-38 -5.4 舵机行程量..........................................................................................................................................-39 -5.5 通道映射..............................................................................................................................................-40 -5.6 舵机反向..............................................................................................................................................-44 -5.7 中立微调..............................................................................................................................................-46 -5.8 微调设定..............................................................................................................................................-47 -5.9 教练模式..............................................................................................................................................-49 -5.10 失控保护............................................................................................................................................-51 -5.11 定时器................................................................................................................................................-53 -5.12 电压告警............................................................................................................................................-54 -5.13 植保语音............................................................................................................................................-54 -5.14 摇杆死区............................................................................................................................................-57 -5.15 一控多机............................................................................................................................................-58 -6 系统设置.....................................................................................................................................................-60 -6.1 通用设置..............................................................................................................................................-62 -6.2 锁屏与显示..........................................................................................................................................-63 -6.3 H/W设置..............................................................................................................................................-64 -6.4 端口设置..............................................................................................................................................-65 -6.5 摇杆校准..............................................................................................................................................-67 -6.6 拨轮校准..............................................................................................................................................-69 -6.7 配置导出..............................................................................................................................................-71 -6.8 通信设置..............................................................................................................................................-73 -6.8.1 发射功率.......................................................................................................................................-73 -6.8.2 遥控器/天空端天线.......................................................................................................................-74 -6.9 电调校准..............................................................................................................................................-75 -7 天空端设置.................................................................................................................................................-76 -7.1 通用设置..............................................................................................................................................-77 -7.1.1 信号模式.......................................................................................................................................-77 -7.1.2 开机对频.......................................................................................................................................-77 -7.1.4 遥控接力.......................................................................................................................................-78 -7.2电压校准...............................................................................................................................................-79 -7.3 PWM设置.............................................................................................................................................-80 -8 图传/数传设置............................................................................................................................................-81 -8.1基础设置...............................................................................................................................................-82 -8.2 高级设置..............................................................................................................................................-84 -8.3 蓝牙配置..............................................................................................................................................-85 -8.4 链路信息..............................................................................................................................................-86 -8.5 图传设置..............................................................................................................................................-86 -8.6 探照灯设置..........................................................................................................................................-87 -9 固件与语音升级.........................................................................................................................................-88 -10 关于保修...................................................................................................................................................-91 -10.1返修流程.............................................................................................................................................-91 -10.2保修政策.............................................................................................................................................-92 -10.2.1 7天包退货...................................................................................................................................-92 -10.2.2 15天免费换货..............................................................................................................................-93 -10.2.3 一年内免费保修..........................................................................................................................-94 -1 阅读提示1.1标识符号的含义本说明书中，如出现以下符号，表示这部分内容需要特别留意：危险若忽略此操作，会有很大概率对使用者或他人造成人身伤害警告若忽略此操作，有可能会对使用者或他人造成人身伤害注意若忽略此操作，有可能会对使用者或他人造成经济损失禁止事项必须执行注释1.2飞行安全DK32遥控接收系统为专业应用场景设计制造，需要操作人员具备一定的基本技能，请务必小心使用。
ReadyNAS 3312 4312X系列网络附加存储数据表说明书
State-of-the-art Performance and Data ProtectionReadyNAS 3312 and 4312X are best-in-class high performance network attached storage systems. The RR4312X has two built-in 10 Gigabit Ethernet interfacesto further meet the storage demandsof next generation business networks. Featuring an architecture powered by blazing fast quad-core 5th generation Intel Xeon processors along with DDR4 ECC memory that is expandable up to 64GB, the RR3312 and RR4312 are the no compromise, high performing data storage systems of choice for businesses that need the very best in capacity, performance and security.ReadyNAS brings state-of-the-art datastorage and protection technologies inan affordable and easy-to-use system tothe SMB. All ReadyNAS are built on therevolutionary ReadyNAS OS 6 operatingsystem and next-gen BTRFS file system.A best-in-class 5 levels of data protection- X-RAID, Unlimited Snapshots, Bit rotprotection, real-time anti-virus and easyoffsite replication work in concert to securelyprotect your data from common risks.All ReadyNAS systems utilize proprietaryReadyCLOUD technology. WithReadyCLOUD, remotely accessing andsharing files in your own secure privatecloud has never been easier. No VPNsetup, no port forwarding, no dynamicDNS required. Designed specificallyfor the unique needs of business users,RR3312 and RR4312X are virtualization-ready with iSCSI support, thin provisioningcapability and VMware certified.To maximize storage capacity, an SASexpansion card (RRSASEXP-10000S) canbe purchased separately for expansionsupport. Expansion chassis fromNETGEAR, EDA2000 and EDA4000, offer12 and 24 bay expansion, respectively.Key Business Features and Solutions• Automatic Backup & Sync: Using the ReadyCLOUD app for PC, scheduled protection is easier than ever before• Bit Rot Protection: A proprietary technology protecting your files from unplanned degradation• Unlimited Snapshots: Unlimited data snapshot capability for on-box protection and flexible data recovery • X-RAID & Instant Provisioning: Easily expand capacity and feel confident knowing that data is always protected • Cloud-managed Replication: Maintaindata sets in multiple locations or ensureprotection of data from remoteor branch office locations• iSCSI and Thin Provisioning: Powerfultools for a businesses taking advantageof virtual infrastructures• Anti-virus & Encryption: Keep dataprotected from outside threats and safefrom prying eyes• Modern GUI and ReadyCLOUDManagement: Sleek, modern interfacethat puts the tools you need, where andwhen you need them• File Server: Unified storage platform forsharing files between Windows, Macand Linux-based computers• Backup: RAID redundancy withautomatic expansion and unlimited datasnapshots for point-in-time restore• Disaster Recovery: Cloud-managedreplication for maintaining multiple setsof data and performing easy restores incase of disaster• Virtualization: Thin provisioning, iSCSIsupport and certified with VMwareHardware ReadyNAS 3312ReadyNAS 4312S ReadyNAS 4312XCPU-10000S Intel Xeon E3-1225v63.3GHzQuad Core Processor,Max Turbo Speed3.7GHzIntel® Xeon E3-1245v6 3.5GHzQuad Core, HyperThreaded Processor,Max Turbo Speed3.9GHzIntel® Xeon E3-1245v6 3.5GHzQuad Core, HyperThreaded Processor,Max Turbo Speed3.9GHzCPU-20000S Intel Xeon E3-1225v63.3GHz, Max TurboSpeed 3.7GHzIntel Xeon E3-1245v63.5GHz, Max TurboSpeed 3.9GHzIntel Xeon E3-1245v63.5GHz, Max TurboSpeed 3.9GHzMemory8GB DDR4 ECC16GB DDR4 ECC16GB DDR4 ECC Memory Expansion64GB DDR464GB DDR464GB DDR4 Drive Bays121212Drive T ypes Supported SATA/SSD 2.5” or 3.5”SATA/SSD 2.5” or 3.5”SATA/SSD 2.5” or 3.5”Hot Swappable Drives Yes Yes Yes eSATA Ports222SAS Ports for Expansion Chassis (sold separately)222 Gigabit LAN Ports44410Gbps LAN Optical SFP+02010Gbps LAN Copper 10GBase-T002USB Ports2x USB3.02x USB3.02x USB3.0Power SupplyDual RedundantInternal 550 W; input100-240V AC,50-60HzDual RedundantInternal 550 W; input100-240V AC,50-60HzDual RedundantInternal 550 W; input100-240V AC,50-60HzChassis Warranty5 years including5 years NextBusiness Day hard-ware replacement5 years including5 years NextBusiness Day hard-ware replacement5 years including5 years NextBusiness Day hard-ware replacementFan (mm) 3 x 80 3 x 80 3 x 80 Dimensions DxWxH (mm)707 x 445 x 88 707 x 445 x 88 707 x 445 x 88 Weight (diskless) (kg)11.96 11.96 11.96 Software and Functionality ReadyNAS 3312ReadyNAS 4312S ReadyNAS 4312XCertification and Compatibility VMware vSphereESXi 6.0 VMware vSphereESXi 6.0VMware vSphereESXi 6.0Cloud-discovery, Setup and Management Yes Yes Yes Data Protection with Unlimited Snapshots Yes Yes Yes Web-managed Replication for Disaster Recovery Yes Yes Yes Real-time Antivirus Yes Yes Yes iSCSI and Thin Provisioning Yes Yes Yes ReadyNAS Rackmount ComparisonTechnical SpecificationsData Protection (Backup & Replication)• Unlimited block-based snapshots for continuous data protection• Restore Snapshots to any point in time• Restore Snapshot data from local admin GUI, ReadyCLOUD, or native Windows File Explorer• Scheduled and manual snapshots• File Synchronization (rsync)• Encrypted Remote Replication• Data compression• Cloud managed Remote Replication (ReadyNAS to ReadyNAS). No licenses required for ReadyNAS OS 6 devices.• AES 256-bit volume based encryption• X-RAID (automatic single volume online expansion)• Single Disk, JBOD• RAID Levels: 0, 1, 5, 6, 10, 50, 60• RAID Global Hot Spare• Backup to external storage (USB/eSATA)• Apple Time Machine support• Amazon Cloud Drive synchronization (requires Amazon account)• ReadyNAS Vault™ Cloud backup (optional service)• Dropbox™ file synchronization (requires Dropbox account)• Real-time Anti-Virus scanning using signature and heuristic algorithms. (No end-user licenses required)Protection for viruses, malware, worms, and Trojans.• Bitrot automatic detection & correction for degraded mediaStorage Area Networks (SAN), Virtualization• Unlimited iSCSI LUN Snapshot• Thin or thick provision LUNs• Multi-LUN per target• LUN mapping and masking• SPC-3 Persistent Reservation (iSCSI)• MPIO and MC/S (iSCSI)• Max # iSCSI Target: 256• Max # iSCSI LUN: 256• VMware vSphere 6• Citrix XenServer 6• Windows Server 2008 Hyper-V• Windows Server 2008 Failover Clustering• Windows Server 2012 R2ReadyCLOUD (cloud access to ReadyNAS• ReadyCLOUD portal based data access and management• Upgrade firmware remotely• VPN quality remote data transfer and management• Share data with friends & co-workers directly from portal• Share file via email linkReadyCLOUD Client Applications• ReadyCLOUD client applications for Apple OS X, Microsoft Windows, Android, and Apple iOS• VPN quality remote data transfer and management• Simple remote access through ReadyCLOUD client (no firewall or router configuration needed)• Sync files/folders between PC (Mac/Windows) & ReadyNAS• Sync files/folders between multiple PCs and ReadyNAS• Sync files/folders between multiple users and ReadyNAS• Backup files/folders from PC to ReadyNASFile System & Transfer Protocols• ReadyNAS OS 6.5 or later• Linux 4.x• Internal File System: BTRFS• External File System: EXT3, EXT4, NTFS, FAT32, HFS+• Copy-on-write file system• Microsoft Network (CIFS/SMB 3)• Apple OS X (AFP 3.3)• Linux/Unix (NFS v4)• Internet (HTTP)• Secure Internet (HTTPS)• File Transfer Protocol (FTP)• FTP over SSL / TLS (explicit)• FTP Passive mode with port range setup• FTP Bandwidth control• FTP Anonymous• FTP Transfer Log• Secure Shell (SSH)• Web Authoring (WebDAV)• Storage Array Network (iSCSI)• File Synchronization (rsync)• Local web file managerUsers/Groups• Max # Users: 8192• Max # User Groups: 8192• Max # Share Folder: 1024• Max # Concurrent Connections: 1024• Share Folder Level ACL Support• Advanced Folder Permissions with Subfolder ACL support for CIFS/SMB, AFP, FTP• Microsoft Active Directory (AD) Domain Controller Authentication• Local access list• ReadyCLOUD based ACL• Domain user login via CIFS/SMB, AFP, FTPManagement• ReadyCLOUD cloud based discovery and management• RAIDar local discovery agent (Windows/Mac)• Save and restore system configuration (clone devices)• Local event log• Local Graphical User Interface (GUI) Languages: English, German, French, Japanese, Chinese (Traditional &Simplified), Russian, Swedish, Portuguese, Italian, Spanish, Polish, Czech, Dutch, Korean• Unicode support• Volume Management• Thin provision Shares and LUNs• Instant Provisioning/Expansion with data protection• Restore to factory default• Operating Systems supported: Microsoft Windows 7, 8/8.1, 10, Microsoft Windows Server 2008 R2/2012, AppleOS X, Linux/Unix, Solaris, Apple iOS, Google Android• Supported Web Browsers (Microsoft Internet Explorer 9+, Microsoft Edge, Mozilla Firefox 14+, Google Chrome50+, Apple Safari 5+)System Monitoring• Device capacity, performance, resource and health monitoring• Bad block scan• Hard Drive S.M.A.R.T.• File System Check• Disk Scrubbing• Disk Defragment• Volume balance• Alerts (SMTP email, SNMP, local log)• Auto-shutdown (hard drive, fan, UPS)• Auto-restart on power recoveryNetworking Protocols• TCP/IP• IPv4• IPv6• Static IP Address• Dynamic IP Address• Multiple IP Settings• DHCP Client• UPnP Discovery• Bonjour Discovery• Link Aggregation IEEE 802.3ad• Port Trunking (balanced round robin, active backup, balance xor, broadcast, 802.3ad link aggregation LACP,transmit load balancing, adaptive load balancing)• Hash Types IEEE 802.3ad LACP or XOR (Layer 2, Layer3, Layer 4)• Jumbo Frames• Static routes• Secure Shell (SSH)• Simple Network Management Protocol v2, v3• Network Time Protocol (NTPMedia• ReadyDLNA (UPnP DLNA Media Server)• ReadyDLNA streams to any compliant device including Playstation and Xbox• ReadyDLNA mobile clients for remote media streaming (iOS, Android)• ReadyDLNA supported music formats (wav, wma, pcm, ogg, mp3, m4a, flac, aac)• ReadyDLNA supported photo formats (jpg, jpeg)• ReadyDLNA supported video formats (3gp, mp4, wmv, xvid, vob, ts, tivo, mts, mpeg, mpg, mp4, mov, mkv, m4v,m4p, m2t, m2ts, flv, flc, fla, divx, avi, asf)• ReadyDLNA supported playlist formats (pls, m3u)• ReadyNAS Surveillance (free trial, license required) supports over 70 brands and 1600 models of IP cameras• iTunes Server• iTunes supported audio formats (mp3, m4a, m4p, wav, aif)• iTunes supported video formats (m4v, mov, mp4)• iTunes supported playlist formats (m3u, wpl)• TiVo Archiving• Plex Media Server streams to DLNA and Plex clients (mobile, desktop, Android TV, Roku, Samsung & LG TVs)HardwareCPU• ReadyNAS 3312: Intel® Xeon E3-1225v5 3.3GHz Quad Core Processor, Max Turbo Speed 3.7GHz• ReadyNAS 4312S: Intel® Xeon E3-1245v5 3.5GHz Quad Core, Hyper Threaded Processor, Max Turbo Speed 3.9GHz• ReadyNAS 4312X: Intel® Xeon E3-1245v5 3.5GHz Quad Core, Hyper Threaded Processor, Max Turbo Speed 3.9GHzMemory• ReadyNAS 3312: 8GB DDR4 ECC• ReadyNAS 4312S:16GB DDR4 ECC• ReadyNAS 4312X:16GB DDR4 ECC• Memory Expansion: 64GB DDR4• Flash: 256MB for OS• 12 Hot Swappable Drive Bays• Drive Types Supported: SATA/SSD 2.5” or 3.5”• Two eSATA ports• Two USB3.0 ports• Total solution capacity: 120TB w/o expansion 600TB w/ 2 x EDA4000• RR4312X: dual 10GbE copper ports• RR4312S: dual 10GbE SFP+ ports• Quad Gigabit Ethernet ports with link aggregation and failover• LEDs: Power, System, 4 x LAN• Three 80mm fans• Dimensions (DxWxH):707mm x 445mm x 88mm• Weight (diskless): 11.96 kg• Dual 550 watt redundant power supplies• Power cord localized to country of sale• Rackmount sliding rail includedCompliance• ENGR 10049 EST Environmental Stress Test Guideline• ENGR 10045 EVT Engineering Validation Test Guideline• ENGR 10048 CVT Compliance Validation Test Guideline• ENGR 10046 System Validation Test Guideline• ENGR 10023 HALT Accelerated Life Test Guideline• ENGR 10036 CDG Component Derating GuidelineEnvironment• Noise levels: <49dBA @ 25C• Operating Temperature: 0-45C• Operating Humidity: 20-80% relative humidity, non-condensing• Smart Fan• Scheduled Power on/off• UPS Support• Network UPS with SNMP Management• Wake on LANEnvironment• Hard drive disk spin down• Auto-power on (after shutdown)• AC Input Power Voltage 100V to 240V• Power Frequency: 50Hz to 60Hz, Single Phase• Power Consumption (Max/Wake on LAN) RR3312: 210/9.2 watts• Power Consumption (Max/Wake on LAN) RR4312S: 210/9.2 watts• Power Consumption (Max/Wake on LAN) RR4312X: 210/9.2 watts• Certification: FCC Class A, CE Class A, RoHS, VCCI Class A• MTBF: 70,723 hoursAccessories• RTRAY04-10000S: Replacement/additional 3.5” or 2.5” hard drive tray• RFAN04-10000S: Replacement 80mm fan• RRAIL03-10000S: Replacement/additional sliding rack mount rail• RPSU03-10000S: Replacement/additional 550W power supply unit• RMEM04-10000S: Replacement 8GB memory module for RR3312 and RR4312X• RMEM05-10000S:16GByte DDR4 ECC U-DIMM 2Rx8 Memory Expansion, applicable to RR3312, RR4312X andRR4312S• RRSASEXP-10000S: SAS Expansion cardAdd-on Applications• One click installation of add-on applications directly through local GUI• Application available for productivity, media, backup, surveillance, and many others• NETGEAR applications include Surveillance, Photo Sharing, Advanced configuration tools• Partner applications include BitTorrent Sync, Plex, Memeo, DVBlink• Community applications include Transmission, ownCloud, qBittorent, MySQL, VPN server, Syslog, Wordpress,joomla, Media Wiki, and others• Application availability subject to change• Applications may impact overall performance• Software Development Kit (SDK) available for 3rd party developersWarranty and SupportHardware Limited Warranty 5 years*Next-Business-Day (NBD) Replacement YesT echnical Support 90 days free from date of purchase** This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller, and covers unmodified hardware, fans and internal power supplies – not software or external power supplies, and requires product registration at https:// or using the Insight App within 90 days of purchase; see https:///about/warranty for details. Intended for indoor use only.NETGEAR, the NETGEAR Logo, ReadyNAS, ReadyCLOUD, ReadyNAS Vault, and X-RAID are trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). Information is subject to change without notice.© 2022 NETGEAR, Inc. All rights reserved.NETGEAR,Inc.350E.PlumeriaDrive,SanJose,CA95134-1911USA,1-888-NETGEAR(638-4327),E-mail:****************,DS-3312/4312S/4312X -25May22。
丹福斯高标准钢管适配器产品简介说明书
Welcome to the higher standard for steel adapters BrochureWelcome to the higher standard for steel adaptersHigher pressure.Higher performance.Beyond SAE certified.Danfoss expands your possibilities.With more than 3000 steel adapter part numbers globally, Danfoss has a wide variation of configurations with large portfolio of ORFS, JIC, BSPP , NPTF, and manyother terminal ends.Expand the equation.Same exceptional Danfoss adapters —now with outstanding corrosion resistance.Achieve operating pressures up to 125% more than SAE.Dura-Kote plating technology.Danfoss Competitor B Competitor Pan assembly that can perform up to 125% greater operating pressureCarbon steel corrosion protection This is a comparison of current carbon steel adaptersafter 650-hours of exposure to salt spray testing which far exceeds the SAE standard of 72-hours. Carbon steelfluid conveyance products protected with Danfoss’Dura-Kote plating technology resist rust longer than other carbon steel products available today.Discover the additional value of using a Danfoss system of products designed to work together to achieve even higher operating pressures. When Danfoss hoses are combined with Danfoss 1A or 4S/6S fittings and Danfoss adapters, assemblies can perform up to 125% higher pressures than the SAE rating.Danfoss adapters now come with Dura-Kote ® plating, which gives you up to 1,000 hours of corrosion resistance. Dura-Kote is an innovative plating technology for steel adapters, offering more corrosive protection for longer life, lower replacement costs, and improved appearance. This corrosion protection decreases the likelihood of leaking, meaning less equipment downtime and greater productivity. Plus, there are no compatibility issues with Dura-Kote plating. The Danfoss adapters you rely on today will look, feel, and perform exactly the same.Many companies offer extra plating services and special requests to enhance corrosion resistance. Requesting extra services can delay your order, complicate delivery, and add significantly to your costs. That is why Danfoss has responded to the needs of the market and simplified the entire process. With Dura-Kote plating now standard on Danfoss adapters, you’ll get products that look better, last longer, and cost less to maintain, which gives you and your customers one less thing to worry about. ++=Same form and functional capabilities Same torque values and pressure ratings Same silver appearance Same procedures for assemblyFor over 90 years, Danfoss has continued to manufacture and supply the highest performing quick disconnect couplings for customers globally. Danfoss’ quality and performance are never compromised when it comes to engineering and manufacturing its full line of quick disconnect couplings. From traditional industry standards to custom couplings for the next generation of emerging markets and new advanced technologies, Danfoss continues to provide quick disconnect coupling solutions to meet your demands. Quick Disconnect Coupling applications:• Hydraulic applications in construction, agriculture, etc. • Fluid transfer • Liquid cooling • Pneumatic • Chemical • Oil and Gas • Aerospace • Medical • Food and Beverage • Law enforcement/rescueCheck out our complete portfolio of Quick Disconnect Couplings found in our catalog at .Literature number: AF435258198969en-000101Patented STC Snap-To-Connect products are threadless connectors that keep equipment up and running longer with simple, leak-free connections.Danfoss has the broadest range of threadless connectors in the industry. Our patented STC technology excels in rigorous mobile application in agriculture, construction, forestry, transportation, utility, and lawn and turf. Because of their easy installation — even in confined spaces — and virtually zero-leak performance (per SAE J1176), more than 25 million STC connections are currently in use worldwide.STC benefits:• Fast reliable one-hand connections requiring no assembly tools • Eliminates cross-threading, over or undertorquing, and hose twisting • Virtually zero leak performance • Direct porting eliminates adapters to maximize cost savings • Resists external contamination • Allows easy disconnection with release toolA full list of available STC products can be found in our catalog at .Literature number: AF444058468933en-000101Making the right connections is easy with Danfoss’ Waltech metric tube fittings. A variety of available sizes and configurations make Danfoss’ metric tube fittings a simple, flexible and cost-effective solution for many applications. With three unique systems — including Walpro ®, WalringPlus ®, and Walform ® — each tube fitting is manufacturered to meet DIN 2353 and ISO 8434-1 standards and withstand pressure and corrosion with best-in-class performance. Metric tube fitting applications:• Harvester/balers • Machine tool • Hydraulic presses • Excavators • Loaders • Mining equipment • Mining equipment • Concrete pumpers • Off-shore equipmentLearn more about Danfoss’ entire line of metric tube fittings by reviewing our Waltech Metric Tube Fittings catalog at .Literature number: AF403661682130en-000201Regardless of the job, Danfoss has the right products to meet the challenge every time.Additional products available from Danfoss.Danfoss Quick Disconnect CouplingsWaltech Metric Tube FittingsDanfoss STC Snap-To-ConnectWalpro WalformWalringPlusAD440177948096en-000101© Danfoss | Power Solutions | April 2023Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.Danfoss Power Solutions, Nordborgvej 81, 6430 Nordborg, Denmark, Tel. +45 74 88 22 22, Fax +45 74 65 25 80,E-mail:****************。
纽威数控车床电气操作
3
操作.............................................................................................................................................. 10
3.1
3.3.3 空运行..........................................................................................................................................18
NL634SC NL635SC
电气操作手册 文件号：NL11-9375-1K(M)
NL201HS NL251SA NL253SA NL322HA
NL201HA NL201SA NL201HAC NL251T NL251HAC
NL402HA
NL502T
NL504T
NL634SCZ NL635SCZ
NL635HA
1.3
与机床操作相关的警告和注意 .................................................................................................... 2
1.4
与日常维护相关的警告 ................................................................................................................ 6
3.2.3 面板开关控制说明......................................................................................................................12
HSAD系列电气火灾监控系统选型设计手册
电气火灾监控系统
1、系统图设计
1、确定电气火灾监控设备和探测器并注明安装建筑位置。 标明低压配电室建筑位置，再标明低压配电箱柜编号和探测器地址码范围及数量。
2、标明每个配电箱的建筑位置，标出配电箱编号和探测器地址编码范围和数量。 3、在配电柜配电系统图上标明探测器的设置位置，说明探测器的型号、地址码、剩余电流报警设定值或 温度报警值，（如需要时，断路器分励脱扣器设置、标明型号及分励电压值）。
3.1.1 主要技术指标
项目类别 产品型号 产品货号 设备容量（地址数） 显示模式 总线类型 输入电源 备用电源 CAN 总线回路数 总线电压 配接监控探测器型号 安装方式 外形尺寸 工作环境
参数 HSAD-S1 HS-S001 ～ 3 32、64、128 个地址 单色 240×128 液晶显示屏，全中文显示 CAN 总线，有效通讯距离≤ 3000 米 AC220V，50Hz DC12V（可连续工作 4 小时）
公司拥有一支专业化的技术研发、管理团队，是由业内参与行业标准编制的安全电 气专家、十五年研发经验高级工程技术人员及优秀消防企业管理人员组建的团队。公司 主要产品有：电气火灾监控系统、智能消防应急照明和疏散指示系统、消防电气控制装 置等消防安全电子类产品。现形成了以北京区域为中心，覆盖华北、东北、西北、西南、 华中、华东、华南的全国营销服务网络。产品广泛应用于学校、医院、住宅、商场、酒店、 写字楼、交通枢纽等场所。
3.2.3 主要技术指标
项目类别 产品型号 产品货号 设备容量（地址数） 显示模式 总线类型 输入电源 备用电源 CAN 总线回路数 网络通讯接口 配接监控探测器型号 安装方式 外形尺寸 工作环境
参数 HSAD-S2 HS-S004 ～ 7 128、256、384、512 个地址 10.4 寸工业彩色液晶显示带触摸屏 CAN 总线，有效通讯距离≤ 3000 米 AC220V，50Hz DC24V( 可连续工作 4 小时 ) 1 ～ 4 条总线 ( 可选 ) 1000Mbit/s 以太网接口 HSAD-R、HSAD-R1、HSAD-R4、HSAD-RT、HSAD-RC 系列
上海丹那赫电d32变频器说明书
上海丹那赫电d32变频器说明书篇一：上海丹那赫电 D32 变频器说明书本说明书介绍了上海丹那赫电 D32 变频器的基本信息、使用步骤、常见问题和解决方案。
1. 介绍上海丹那赫电 D32 变频器是一款高性能、高精度的变频器,适用于各种工业自动化设备、机械设备和自动化生产线。
它可以控制电机的转速和转矩,提高设备的效率和稳定性。
2. 使用步骤在使用上海丹那赫电 D32 变频器之前,需要按照以下步骤进行操作:a. 安装变频器:将变频器安装在需要控制电机的机械设备或自动化生产线上。
安装时需要注意变频器的朝向和位置,确保变频器与电机之间的空间足够大,避免变频器受到损坏。
b. 连接电源:将变频器的电源适配器连接到电源插座或电源线路上。
确保电源电压和频率符合变频器的要求。
c. 设置参数:根据设备的需要和实际情况,设置变频器的参数,例如频率、转矩、电压等。
可以通过变频器的操作手册或在线帮助文档查找相关参数。
d. 测试运行:启动变频器,观察电机的转速和转矩是否正常。
可以通过变频器的操作手册或在线帮助文档了解变频器的性能参数和测试方法。
3. 常见问题以下是一些使用上海丹那赫电 D32 变频器常见的问题和解决方案:a. 变频器故障:变频器出现故障时,可以通过检查变频器的操作手册或在线帮助文档来查找故障排除方法。
b. 安装和连接问题:安装和连接变频器时需要注意避免损坏变频器和电源线路。
c. 调试和测试问题:调试和测试变频器时需要注意参数设置和测试方法,以确保变频器的性能参数正常。
4. 解决方案a. 更换电源适配器:如果电源适配器损坏,需要更换新的电源适配器。
b. 调整参数:如果变频器参数设置不正确,需要调整变频器参数以获得最佳的性能。
c. 检查安装和连接:如果安装和连接出现问题,需要检查安装和连接方式,确保没有损坏变频器和电源线路。
d. 联系技术支持:如果遇到其他问题,可以联系变频器的技术支持,获得帮助和解决方案。
5. 总结本说明书介绍了上海丹那赫电 D32 变频器的基本信息、使用步骤、常见问题和解决方案。
西门子CC工控
通讯产品 ................................................................................................................................. 3/229
AS-interface ................................................................................................................................. 3/229 ET200 电机起动器 ........................................................................................................................ 3/235 SIMOCODE.................................................................................................................................. 3/237
SIRIUS 继电器产品.......................................................................................................... 3/223
热敏电阻电机保护继电器 3RN ....................................................................... 3/223
浩瀚电器重型电锅替换零部件手册说明书
VTMB22VB2S VB21VTMB2VB SERIES1 THRU45 - 678 - 9101112 - 13 - 14ELECTRICAL COMPONENTSVB SERIESELECTRICAL COMPONENTSILLUS.PART OF PART AMT.1417934-G1Block Assy. - Porcelain (208-240 V. Machine)(Incls.items 2, 3 & 4)..........................................AR 2SC-117-3Mach. Screw 10-24 x 11⁄4 Rd. Hd................................................................................................AR 3WS-23-20Washer.......................................................................................................................................AR 4NS-44-9Nut Assy 10-24 Hex “KEPS”......................................................................................................AR 5411497-B1Contactor (208-240 V. Machines)..............................................................................................AR 6417856-1Ground Lug (VB21, VB221) (1)7406708-G1Door - Breaker Panel (1)8412578-1Closure - Breaker (208-240 V.)(Shown) (1)9412578-2Closure - Breaker (480 V.) (1)10411501-14Circuit Breaker (50 Amp.)(208-240 V. Machines)......................................................................AR 11412577-1Box - Breaker. (1)12410472-9Block - Terminal (208/240 V.) (1)13410472-11Terminal Block (208-240 V.) (1)14410472-8Terminal Block (480 V.) (1)VB SERIESVB SERIES 5VB SERIESDOOR MECHANISM — OVENPL-40408-11011 THRU141516171821 - 2219 - 20VB SERIESDOOR MECHANISM - OVENILLUS.PART OF PART AMT.1410110-1Anchor - Spring (1)2417865-1Turnbuckle (36") (1)3405618-1Hook - Oven Door (1)4SC-90-1Bolt - Shoulder 1⁄2-13 x 2 Hex Hd (1)5408895-G1Crank Support Assy (1)6409240-2Spacer - 3⁄4 Pipe x 7⁄16 Lg (1)7404629-1Bearing - Hinge Pin (1)8408896-1Support - Crank (2)9410111-1Crank - Bell (1)10406363-1Spring - Door (Long) (1)11408895-G1Crank Support Assy (1)12409240-1Spacer - 3⁄4 x 5⁄16 Lg (1)13404629-1Bearing - Hinge Pin (1)14408896-1Support - Crank (1)15410090-G1Radius Bar Assy (1)16410089-1Arm - Door Control (1)17SC-90-1Bolt - Shoulder 1⁄2-13 x 2 Hex Hd (1)18PC-3-36Cotter Pin 3⁄32 x 1 Lg (1)19417860-1Bolt - Shoulder 3⁄8-16 x 3⁄4 Hex Hd (1)20417862-1Pin - Door Hinge (1)21410114-1Cover - Bottom Terminal (1)22410113-1Cover - Terminals (Top Oven Heat Elements) (1)412887-G1Door Frame Assy (1)VB SERIESBROILER GRID & DRIP SHIELDNAME OF PARTGrid Assy (1)Handle (1)Retainer - Drip Shield (1)Mach. Screw 10-24 x 1 Truss Hd (2)Spacer (2)Lock Nut 10-24 Light Flexloc (2)Post - Door (R.H.) (1)Post - Door (L.H.) (1)Drip Shield (1)Ball Bearing (Grid Carriage).........................................................................................................VB SERIESPL-40410-1915 - 16 CARRIAGE & LIFT UNIT (BROILER)PART OF PART406966-G1Carriage & Lift Mechanism (Incls.items 2 thru 7)......................................................................... 417866Spring - Carriage.. (1)405655-1Ball Bearing (Grid Carriage)......................................................................................................... 407488-1Pin - Bearing (2)417869-1Spacer (2)WS-3-3Washer (4)PC-3-36Cotter Pin 3⁄32 x 1 Lg (2)407619-1Ratchet Stop (1)406046-1Sleeve - Handle (1)414819-1Red Plastic Ball Handle................................................................................................................ 406056-2Adapter - Ball Handle. (1)407636-G1Push Rod Assy (1)417810-2Spring - Compression (1)NS-13-22Full Nut 3⁄8-16 Hex (2)406990-G1Grease Collector (1)407006-1Handle - Grease Collector (1)VB SERIESPL-40411-1ELECTRIC HEAT ELEMENTS(BROILER)PARTNAME OF PART407012-4Electric Heat Element 208 V........................................................................................................407012-5Electric Heat Element 240 V........................................................................................................407012-6Electric Heat Element 480 V........................................................................................................410465-1Retainer - Heating Element (3)407930-G1Heat Shield Assy (1)VB SERIES9 THRU141715 - 16PL-40412-1ELECTRIC HEAT ELEMENTS (OVEN)NAME OF PARTFrame Assy. - Top Elements (1)Frame Assy. - Bottom Elements................................................................................................... Element Assy. - Outer Top (208 V.)............................................................................................. Element Assy. - Outer Top (240 V.)............................................................................................. Element Assy. - Outer Top (480 V.)............................................................................................. Element - Outer Bottom (208 V.).. (1)Element - Outer Bottom (240 V.) (1)Element - Outer Bottom (480 V.) (1)VB SERIES2PL-40413-1MISCELLANEOUSNAME OF PARTFlue Riser (1)Strap - Back Attaching................................................................................................................Leg (SST) (4)Caster W/O Brake (2)Caster W/Brake (2)。
DS-III型旋转探测仪工作原理_旋转探测仪_探测仪
使用前请仔细阅读说明书DS-III型旋转探测仪产品介绍DS-III型速度开关结合了西门子传感器的先进技术和国内速度传感器的实际应用开发而成(又名速度传感器、低速开关、速度开关、打滑开关)。
本产品主要用于皮带输送机、提升机、螺旋输送机、给料机、卸料阀、研磨机、破碎机、泵、离心干火机、搅拌机和除尘器等转动设备，对皮带打滑、皮带断裂、卡转、慢转、转动轴剪切和过载、传动链(带)脱落等机械故障能及时处理，起到保护设备减少损失的作用。
工作原理DS-III型速度开关安装在被传动轴旁，被传动轴装有检测片(参见安装示意图)。
当电动机运转时，通过传动装置驱使被传动轴转动，被传动轴上的检测片也随之转动。
速度开关接收到检测片的均匀间隔脉冲信号，此时速度开关为闭合状态，通过串接中间继电器的自保触头使交流接触器吸合(参见电气接线图)交流接触器主触头闭合使电机转动。
当设备发生卡转，堵转、皮带打滑、传动带脱落故障时，被传动轴将慢转或停转，此时检测片也随之慢转或停转，DS-III型速度开关将接收不到检测片的均匀间隔脉冲信号。
在工艺指定时间内(3~17秒)未接收到转动信号，速度开关将由闭合状态转为断开，中间继电器也断开，交流接触器断开，在3~17秒内及时停机，可靠的保护设备(此产品接收检测片转动信号与电机大小无关)。
DS-III型速度开关不同于接近开关主要区别在于内部装有延时电路，他可根据被动轴不同的转速调整内部延时来达到保护设备的卡转、堵转、超载慢转、打滑、转动链（带）脱落，转动轴断裂等故障的目的。
速度开关安装在被动轴上，它是通过装在被传动轴上的检测片，利用电磁感应的原理给速度开关均匀的脉冲信号，设备被动轴转动一圈要给速度开关两个脉冲信号，速度开关在单位时间里接收不到检测片发出的脉冲信号，速度开关则判定设备已出现卡转、堵转、超载慢转、打滑、转动链（带）脱落，转动轴断裂等故障，此时速度开关由闭合状态变为断开状态，而串接的中间继电器线圈也同时失电，继电器的触点出由常闭变为常开，从而发出报警信号或与电机联锁直接停机，达到保护设备的目的。
3G3MX2选型样本
ƽ㋻ޥᅝ㺙 ƽᆚⷕ䅸䆕 ƽヺড়5R+6ᷛޚ ƽ䭓ᇓੑ䆒䅵 ƽ䖛⬉⌕ᡥࠊǃ䖛⬉य़ᡥࠊ ƽ㞾ࡼ㡖㛑䖤㸠ㄝ
ƽঠ䞡乱ᅮ㾘Ḑ ৃ䗝ᢽ䞡䕑&7䕏䕑97 ƽݙ㕂ࠊࡼ⬉䏃 ƽ᮴Ӵᛳ఼ⶶ䞣ࠊǂ+]ˁ䕀ⶽᅲ⦄ᔎ䖤䕀 ƽ䕀ⶽࠊ ƽ3,'ࠊࡳ㛑
䆶⬉䆱800-820-4535
5
ᏺড作ⱘ9I ࠊ
ࡳ㛑ǃ㑻䕧 ܹߛᤶⳂᷛԡ㕂 ᳔㑻
ヺড়,62 3/G
㺙㕂ⱘᅝܼ䆒䅵DŽ ᮴䳔Փ⬉ᴎذℶ䖤㸠ⱘ㾺఼ˈᑊϨ䖬㛑ᬒᖗഄ Ϣྚ啭ᅝܼࠊ఼㒘ড়DŽ
Ć*0;ƶ=Ёᴀഄѻક᳝䆹ࡳ㛑ˈ⬇䇋䅸䆕DŽ *0;ƶܼ⧗ѻક᳝䆹ࡳ㛑ˈϨᏆ⬇䇋䅸䆕ˈ䳔㽕䆕к䇋Ϣᔧഄࡲџ໘㘨㋏DŽ
䗮ֵ
0RGEXV䗮ֵࡳ㛑ᔎ࣪ ᷛޚ䜡
ᅝܼ
ヺড়,62˖ 3/G ,(&6WRS&DWHJRU\ᅝܼᷛޚ ᷛޚ䜡
ࠊ
ㅔᯧԡ㕂ࠊࡳ㛑 ᷛޚ䜡
䆶⬉䆱800-820-4535
3
多功能型小型变频器 3G3MX2
ᇣᎻⱘᴎ䑿Ϟޱ䲚ⴔ᳔ᮄᡔᴃDŽ ᑨ⫼㣗ೈᐙᠽሩDŽ
Ꮰᳯ䗮䖛І㸠 䗮ֵৠᯊৄব乥఼ থ䗕䖤㸠ᣛҸDŽ
⒵䎇䍞ᴹ䍞催ⱘ㽕∖DŽ
0;ⱘᆍ䞣ǃᗻ㛑དDŽ
ࡳ㛑
Ꮰᳯ䗮䖛І㸠 䗮ֵৄব乥఼ 䯈䗮ֵDŽ
5; 0;
催 ࡳ 㛑
-=0=
ᆍ䞣 N:
ᆍ䞣㋏߫唤ܼ
2
᳔ᮄѻક䌘᭭䇋ⱏᔩ
多功能型小型变频器 3G3MX2
108×128 170.5
140×260 155
● 三相400V级
项目 机型名称(3G3MX2-□-Z) kW 适用电机容量 HP CT VT CT VT CT VT CT VT A4004 0.4 0.75 1/2 1 1.1 1.3 1.4 1.7 A4007 0.75 1.5 1 2 2.2 2.6 2.8 3.4 A4015 1.5 2.2 2 3 3.1 3.5 3.9 4.4 A4022 2.2 3.0 3 4 3.6 4.5 4.5 5.7 三相400V A4030 *2 3.0 4.0 4 5 4.7 5.7 5.9 7.3 A4040 4.0 5.5 5 7 1/2 6.0 7.3 7.6 9.2 A4055 5.5 7.5 7 1/2 10 9.7 11.5 12.3 14.5 A4075 7.5 11 10 15 11.8 15.1 14.9 19.1 A4110 11 15 15 20 15.7 20.4 19.9 25.7 A4150 15 18.5 20 25 20.4 25.0 25.7 31.5
德力西 CDPV3熔断器 规格书 说明书
DC1500V选型规格书德力西集团有限公司公司地址：浙江省温州市柳市工业园电话：*************DC1500V目录适用范围 (1)命名 (1)技术参数 (1)外形安装尺寸 (1)特性曲线 (2)工作条件 (3)周围空气 (3)海拔 (4)大气条件 (4)熔断器安装、使用及维护 (4)熔断器的运输和贮存 (5)熔断器的开箱及检查 (5)订货须知 (5)DC1500V适用范围CDPV3-450G半导体设备保护用熔断体适用于额定电压不超过DC1500V，额定电流不超过450A，额定短路能力不超过250kA的配电线路中作为整流二极管、晶闸管及其半导体器件组成的成套装置的短路和某些不允许过电流的过载保护。
本产品为部分范围保护用熔断体，具有强限流、高分断能力等特点,适用于储能、风电等行业应用。
可以作为储能系统、动力系统及其他器件和设备的短路保护。
命名熔断体的命名技术参数表1熔断体的主要术参数外形安装尺寸（1）产品型号额定电压（V）熔断体额定电流（A）额定分断能力I1(kA)熔断体的额定耗散功率(W)分断范围和使用类别CDPV3-450G DC150040,50,63,80,100,125,160,200,250,300,315,350,400,450250≤109aRDC1500V特性曲线（2）DC1500V工作条件正常工作条件及修正参数熔断器在下述的正常使用条件下工作，不需要额外的修正。
超过正常使用条件时，如果在允许使用条件范围内，可能需要修正一些参数或咨询。
如果超过允许使用条件的范围，应咨询我公司，并进行条件的工作适应性评估和测试。
推荐长期通流的电流值不大于额定电流80%。
周围空气温度正常使用条件-5℃～40℃。
允许使用条件-40℃～85℃。
周围空气温度变化的参数修正：在低于-5℃下工作，熔断器的低倍过载过电流的弧前时间略有延长，额定电流略有增大。
但是除非-5℃以上不是工作范围，一般不考虑增加熔断器额定电流。
DS21354DK;中文规格书,Datasheet资料
GENERAL DESCRIPTIONThe DS21354 design kit is an easy-to-use evaluation board for the DS21354 E1 single-chip transceiver (SCT). The DS21354DK is intended to be used as a daughter card with either the DK2000 or the DK101 motherboards. The DS21354DK comes complete with a DS21354 SCT, transformers, termination resistors, configuration switches, line-protection circuitry, network connectors, and motherboard connectors. The DK101/DK2000 motherboard and Dallas’ ChipView software give point-and-click access to configuration and status registers from a Windows®-based PC. On-board LEDs indicate receive loss-of-signal and interrupt status, as well as multiple clock and signal routing configurations.Each DS21354DK is shipped with a free DK101 motherboard. For complex applications, the DK2000 high-performance demo kit motherboard can be purchased separately.Windows is a registered trademark of Microsoft Corp.DESIGN KIT CONTENTSDS21354DK Design Kit Daughter CardDK101 Low-Cost MotherboardCD ROMChipViewSoftwareDS21354DK Data SheetDK101 Data SheetDS21354 Data SheetDS21354 Errata Sheet FEATURESDemonstrates Key Functions of the DS21354 E1 SCT TransceiverIncludes DS21354 SCT, Transformers,Bantum, BNC and RJ48 Network Connectors,and Termination PassivesBNC Connections for 75Ω E1Bantam and RJ48 Connectors for 120Ω E1Multitap Transformer to Facilitate TrueImpedance Matching for 75Ω and 120Ω/100ΩPathsCompatible with DK101 and DK2000 Demo Kit MotherboardsDK101/DK2000 and ChipView SoftwareProvide Point-and-Click Access to theDS21354 Register SetSoftware-Controlled (Register Mapped)Configuration Switches to Facilitate Clock andSignal RoutingAll Equipment-Side Framer Pins are Easily Accessible for External Data Source/SinkLEDs for Loss-Of-Signal and Interrupt Status as well as Indications for Multiple Clock andSignal Routing ConfigurationsEasy-to-Read Silk Screen Labels Identify the Signals Associated with all Connectors,Jumper, and LEDsNetwork Interface Protection for Overvoltage and Overcurrent Events Area Available forFurther CustomizationORDERING INFORMATIONPART DESCRIPTION DS21354DKDS21354 Design Kit Daughter Card(with include DK101 motherboard)DS21354DKE1 Single-Chip Transceiver Design Kit Daughter CardTABLE OF CONTENTSCOMPONENT LIST (3)BASIC OPERATION (4)H ARDWARE C ONFIGURATION (4)Q UICK S ETUP (D EMO M ODE) (4)Q UICK S ETUP (R EGISTER V IEW) (4)REGISTER MAP (5)CPLD R EGISTER M AP (5)DS21354 INFORMATION (8)DS21354DK INFORMATION (8)TECHNICAL SUPPORT (8)SCHEMATICS (8)DOCUMENT REVISION HISTORY (8)LIST OF TABLESTable 1. Daughter Card Address Map (5)Table 2. CPLD Register Map (5)COMPONENT LISTDESIGNATION QTY DESCRIPTION SUPPLIER PARTC1–C5, C8–C12,C15–C19, C21,C22, C29–C3423 0.1μF 10%, 16V ceramic capacitors (0603) Digi-Key 311-1088-1-NDC7, C36 2 1μF 10%, 16V ceramic capacitors (1206) Digi-Key PCC1882CT-NDC13, C14 2 0.1μF 10%, 16V ceramic capacitors (0805) Digi-Key 311-1142-1-ND C23 10.1μF 10%, 25V ceramic capacitor (1206) Digi-Key PCC1883CT-NDC24–C27 40.22μF, 50V ceramic capacitors Digi-Key UNKC35 110μF 20%, 16V tantalum capacitor (B case) Digi-Key PCS3106CT-ND DS1, DS4–DS18 16 LED, green, SMD Digi-Key P501CT-NDDS2, DS3 2 LED, red, SMD Digi-KeyP500CT-ND F1–F6 6 250V, 1.25A fuse, SMT Teccor Electronics F1250TJ1, J2 2 Male 0.1, SMD, 50-pin, dual-row vertical Samtec TSM-125-01-T-DVJ3, J4 2 Bantam connectors SWK RTT34B02J5, J6 2 Connector BNC RA 5-pin Kruvand UCBJR220J7–J9 3 Socket, SMD, 50-pin, dual-row vertical Samtec TFM-125-02-S-D-LCJT10 1 Connector, 10-pin, dual-row vertical Digi-Key S2012-05-NDL1 1Choke, dual 4-line 24μH, 8-pin SO Pulse Engineering PE-65857 R1, R14, R21 3 51.1Ω 1%, 1/8W resistors (1206) Digi-Key P51.1FCT-ND R2, R3, R58, R59 4 0Ω 5%, 1/8W resistors (1206) Digi-Key P0.0ETR-ND R4, R5, R60 3 51.1Ω 1%, 1/10W resistors (0805) Digi-Key P51.1CCT-ND R6, R9, R10, R13,R15–R19, R22,R23, R25–R29,R32, R37, R38,R44, R47–R49, R6124 10kΩ 1%, 1/10W resistors (0805) Digi-Key P10.0KCCT-NDR7, R8, R11, R12,R30, R31, R35,R36, R39–R43,R45, R50–R5318 330Ω 0.1%, 1/10W MF resistors (0805) Digi-Key P330ZCT-NDR24 11.0kΩ 1%, 1/10W resistor (0805) Digi-Key P1.00KCCT-NDR33, R34 2 Not populate — Not populatedR46 14.7kΩ 1%, 1/8W resistor (0805) Digi-Key 9C08052A4701FK HFTR54, R55 2 61.9Ω 1%, 1/8W resistors (1206) Digi-Key P61.9FCT-ND R56, R57 2 49.9Ω 1%, 1/8W resistors (1206) Digi-Key P49.9FCT-ND RJ1 1RJ48connector Molex 43223 SW1 1 Switch DPDT slide 6-pin TH Avnet SSA22T1 1 XFMR 16-pin SMT Pulse Engineering TX1099U1–U4, U6 5 BBUS switch 10-bit CMOS, 150-mil, 24-pin SO IDT IDTQS3R861QU5 1 144-pin macrocell CPLD Avnet XC95144XL-10TQ100CU7–U10 4 Quad bus switch, 150-mil, 16-pin SO IDT IDTQS3125Q U11 1 T1/E1/J1 XCVR 100-pin QFP, 0°C to +70°C Dallas Semiconductor DS2156LZ1, Z6–Z8 4 160V, 500A Sidactor Teccor Electronics P1800SCMC Z2, Z3 2 58V, 500A Sidactor Teccor Electronics P0640SCMC Z4, Z5 2 6V, 50A Sidactor Teccor Electronics P0080SAMC Z9, Z10 2 25V, 500A Sidactor Teccor Electronics P0300SCMCBASIC OPERATIONThis design kit relies upon several supporting files, which can be downloaded from our website at /DS21354DK. See the DS21354DK QuickView data sheet for these files.Hardware ConfigurationUsing the DK101 processor board:• Connect the daughter card to the DK101 processor board.• Supply 3.3V to the banana-plug receptacles marked GND and VCC_3.3V. (The external 5V connector and the TIM 5V supply headers are unused.)• All processor board DIP switch settings should be in the ON position with exception for the flash programming switch, which should be OFF.• From the Programs menu, launch the host application named ChipView.EXE. Run the ChipView application. If the default installation options were used, click the Start button on the Windows toolbar and selectPrograms→ChipView→ChipView.Using the DK2000 processor board:• Connect the daughter card to the DK2000 processor board.• Connect J1 to the power supply that is delivered with the kit. Alternately, a PC power supply can be connected to connector J2.• From the Programs menu, launch the host application named ChipView.EXE. Run the ChipView application. If the default installation options were used, click the Start button on the Windows toolbar and selectPrograms→ChipView→ChipView.General:• Upon power-up the RLOS LED is lit, as well as the MCLK-2.048MHz and TCLK-2.048MHz LEDs.• Due to the dual winding transformer, only the 120Ω line build-out configuration setting is needed to cover 75ΩE1 and 120Ω E1.Quick Setup (Demo Mode)• The PC loads the program, offering a choice among Demo Mode, Register View, and Terminal Mode. Select Demo Mode.• The program requests a configuration file, then select DS21354_E1_DSNCOM_DRVR.cfg.• The Demo Mode screen appears. Upon external loopback, the LOS and OOF indicators extinguish.Quick Setup (Register View)• The PC loads the program, offering a choice among Demo Mode, Register View, and Terminal Mode. Select Register View.• The program requests a definition file, then select DS21354.def.• The Register View screen appears, showing the register names, acronyms, and values. Note: During the definition file load process, all registers are initialized according to the init value filed in the definition file(because the SETUP field in the .def file is turned on).• Predefined register settings for several functions are available as initialization files.⎯ INI files are loaded by selecting the menu File→Reg Ini File→Load Ini File.⎯ Load the INI file DS21354e1_fas_crc4_cas.ini.⎯ After loading the INI file the following may be observed:The RLOS LED extinguishes upon external loopback.The device is now configured for E1 FAS with CRC4 and CAS.Miscellaneous:• Clock frequencies and certain pin bias levels are provided by a register-mapped CPLD, which is on the DS21354 daughter card.• The definition file for this CPLD is named DS215x_35x_CPLD_V2.def. See the CPLD Register Map section for definitions.• All files referenced above are available for download in the section marked “File Locations.”REGISTER MAPThe DK101 daughter card address space begins at 0x81000000. The DK2000 daughter card address space begins at:0x30000000 for slot 0 0x40000000 for slot 1 0x50000000 for slot 2 0x60000000 for slot 3All offsets given in Table 1 are relative to the beginning of the daughter card address space.Table 1. Daughter Card Address MapOFFSET DEVICE DESCRIPTION 0X0000 to 0X0015CPLD Board identification and clock/signal routing 0X1000 to 0X10ff Single-ChipTransceiverBoard is populated with one of the following:DS2155, DS2156, DS21352, or DS21354.Please see the data sheet(s) for details.Registers in the CPLD can be easily modified using ChipView.exe, a host-based user-interface software, along with the definition file named DS215x_35x_CPLD_V2.def . Definition files for the SCT are named DS2155.def , DS21352.def , or DS21354.def , depending on the board population option.CPLD Register MapTable 2. CPLD Register MapOFFSET NAME TYPE DESCRIPTION 0X0000 BID Read-Only Board ID 0X0002 XBIDH Read-Only High-Nibble Extended Board ID 0X0003 XBIDM Read-Only Middle-Nibble Extended Board ID 0X0004 XBIDL Read-Only Low-Nibble Extended Board ID 0X0005 BREV Read-Only Board FAB Revision 0X0006 AREV Read-Only Board Assembly Revision 0X0007 PREV Read-Only PLD Revision 0X0011 SWITCH1 Read-Write Pin to 1.544MHz 0X0012 SWITCH2 Read-Write Pin to 2.048MHz 0X0013 SWITCH3 Read-Write Pin-to-Pin Connect 0X0014 SWITCH4 Read-Write Pin-to-Pin Connect 0X0015LEVELSRead-WriteSet Level on Pin 1 = 3.3VID RegistersOFFSET NAME TYPE VALUEDESCRIPTION0X0000 BID Read-Only 0xD Board ID0X0002 XBIDH Read-Only 0x0High-Nibble Extended Board ID 0X0003 XBIDM Read-Only 0x0Middle-Nibble Extended Board ID 0X0004 XBIDL Read-Only0x5Low-Nibble Extended Board ID 0X0005 BREV Read-Only Displays currentFAB revision Board FAB Revision0X0006 AREV Read-Only Displays currentassembly revision Board Assembly Revision0X0007 PREV Read-Only Displays currentPLD firmwarePLD RevisionrevisionControl RegistersThe control registers are used primarily to control several banks of FET switches that route clocks and backplane signals. Please note that certain register settings cause line contention, e.g., setting SWITCH1.4 and SWITCH2.4 both to 0 would drive MCLK with both 1.544MHz and 2.048MHz.SWITCH1: PIN TO 1.544MHz (OFFSET = 0x0011) INITIAL VALUE = 0xF(MSB)(LSB) — — — — MCLK TCLK RSYSCLK TSYSCLKNAME POSITION FUNCTIONMCLK SWITCH1.30 = Connect MCLK to the 1.544MHz clock1 = Open Switch 1.4TCLK SWITCH1.20 = Connect TCLK to the 1.544MHz clock1 = Open Switch 1.3RSYSCLK SWITCH1.10 = Connect RSYSCLK to the 1.544MHz clock1 = Open Switch 1.2TSYSCLK SWITCH1.00 = Connect TSYSCLK to the 1.544MHz clock1 = Open Switch 1.1SWITCH2: PIN TO 2.048MHz (Offset = 0X0012) INITIAL VALUE = 0x3(MSB)(LSB) — — — — MCLK TCLK RSYSCLK TSYSCLKNAME POSITION FUNCTIONMCLK SWITCH2.30 = Connect MCLK to the 2.048MHz clock1 = Open Switch 2.4TCLK SWITCH2.20 = Connect TCLK to the 2.048MHz clock1 = Open Switch 2.3RSYSCLK SWITCH2.10 = Connect RSYSCLK to the 2.048MHz clock1 = Open Switch 2.2TSYSCLK SWITCH2.00 = Connect TSYSCLK to the 2.048MHz clock1 = Open Switch 2.1SWITCH3: PIN-TO-PIN CONNECT (Offset = 0X0013) INITIAL VALUE = 0xF(MSB)(LSB) — — — — TSS_RS TCL_RC RSY_RC TSY_RCNAME POSITION FUNCTIONTSS_RS SWITCH3.30 = Connect TSSYNC to RSYNC1 = Open Switch 3.4TCL_RC SWITCH3.20 = Connect TCLK to RCLK1 = Open Switch 3.3RSY_RC SWITCH3.10 = Connect RSYSCLK to RCLK1 = Open Switch 3.2TSY_RC SWITCH3.00 = Connect TSYSCLK to RCLK1 = Open Switch 3.1SWITCH4: PIN-TO-PIN CONNECT (Offset = 0X0014) INITIAL VALUE = 0x3(MSB)(LSB) — — — —URCLK_2048UTCLK_2048 RSER_TSER RSYNC_TSYNCNAME POSITION FUNCTIONURCLK_2048 SWITCH4.30 = Connect UR_CLK (TSSYNC) to 2.048MHz1 = Open Switch 4.4UTCLK_2048 SWITCH4.20 = Connect UT_CLK (TCHCLK) to 2.048MHz1 = Open Switch 4.3RSER_TSER SWITCH4.10 = Connect RER to TSER1 = Open Switch 4.2RSYNC_TSYNC SWITCH4.00 = Connect RSYNC to TSYNC1 = Open Switch 4.1LEVELS: SET LEVEL ON PIN (Offset = 0X0015) INITIAL VALUE = 0x6(MSB)(LSB) — — — — — BP_EN PPCTDM_EN TUSELNAME POSITION FUNCTION— LEVELS1.3 —BP_EN LEVELS1.20 = Enable IDT switches that connect the UTOPIA bus to daughter card header PPCTDM_EN LEVELS1.10 = Enable IDT switches that connect the TDM bus to thedaughter card header TUSEL LEVELS1.00 = Set DS2156.TUSEL to enable TDM backplane1 = Set DS2156.TUSEL to enable UTOPIA backplaneNote (DS2156 only): When the UTOPIA backplane is enabled (LEVELS.TUSEL = 1) there is a possibility for contention between the UTOPIA bus master and TSYSCLK, TSER, and RSER. To avoid this, the following switches should be opened when the UTOPIA backplane is enabled: SWITCH1.0, SWITCH2.0, SWITCH3.0, and SWITCH4.18 of 21Maxim/Dallas Semiconductor cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim/Dallas Semiconductor product. No circuit patent licenses are implied. Maxim/Dallas Semiconductor reserves the right to change the circuitry and specifications without notice at any time.DS21354 INFORMATIONFor more information about the DS21354, please consult the DS21354 data sheet available on our website at /DS21354. Software downloads are also available for this design kit.DS21354DK INFORMATIONFor more information about the DS21354DK, including software downloads, please consult the DS21354DK data sheet available on our website at /DS21354DK .TECHNICAL SUPPORTFor additional technical support, please e-mail your questions to telecom.support@ .SCHEMATICSThe DS21354DK schematics are featured in the following 13 pages.DOCUMENT REVISION HISTORYREVISION DATE DESCRIPTION060303Initial DS21354DK data sheet release.011904Updated the General Description and Features sections; added the Demo KitContents section.012705Updated schematics (removed component values for Fuse and Sidactor; seeComponent List ).110106 Updated schematics.21562155213521552156213522135445678分销商库存信息: MAXIMDS21354DK。
DKS 产品说明书
Member:
VEHICULAR AC & DC
SLIDE GATE OPERATORS
Residential • Apartment/College Residence Halls • Gated Communities Mixed Use Buildings • Commercial/Industrial • Parking • Self Storage
protection devices.
DC/Solar 9024
Operator is 24 Volt DC and includes built-in battery backup 115/230 VAC (switch selectable) or 24 VDC Solar Power 1/2 HP Quadra Drive Heavy-duty DC motor. Heavy-duty 30:1 ratio gearbox. Solar power ready, with 0.0 Amp SBPD Circuit.
Upon a power outage, these operators “fail” in a “safe” condition allowing the gate to be pushed open without any special keys, cranks or special knowledge. This is a requirement by many fire department authorities throughout the country.
DTSD103 DSSD103-TA4用户手册
DTSD103/DSSD103-BF型三相电子式多功能电能表用户手册(BF国标)哈尔滨电表仪器股份有限公司目录一、产品简介 (1)1.1概述 (1)1.2功能型号 (1)1.3技术指标 (2)1.4工作原理 (3)二、外形说明及安装 (4)2.1 外形图 (4)2.2 液晶显示屏内容 (5)2.3电表的安装及接线 (6)三、基本功能 (9)3.1电能计量功能 (9)3.2 最大需量记录功能 (10)3.3 复费率功能 (10)3.4 失压记录功能 (12)3.5 失流记录功能 (13)3.6 电压合格率记录功能 (14)3.7 电能冻结功能 (15)3.8 电表数据轮显功能 (15)3.9 按键显示功能 (18)3.10 停电、来电记录功能 (18)3.11 编程、需量清零、广播校时记录功能 (18)3.12 报警功能 (18)3.13 编程功能 (19)3.14其他功能 (21)四、扩展功能 (22)4.1 每月(结算)正向有功用电量记录功能 (22)4.2 时区结束正向有功电能冻结功能 (22)4.3负荷代表日整点有功电能记录 (22)4.4 负荷曲线记录功能（可选功能） (22)4.5 独立的双485通讯接口和红外通讯口 (22)4.6 停电唤醒功能 (22)4.7三相无电压时电流检测功能（可选功能） (23)4.8 多功能(时钟、需量周期更替、时段切换)检测输出口功能 (23)4.9 背光功能 (23)五、运输和贮存 (23)六、售后服务 (23)附录A 内部参数及状态(控制)字说明 (24)附录B 红外遥控器使用说明 (28)附录C 功能附录表 (29)附表D 负荷曲线数据冻结说明 (49)一、产品简介1.1概述DTSD103/DSSD103-BF型三相电子式多功能电能表是采用大规模集成电路，应用数字采样处理技术及SMT工艺，根据工业用户实际用电状况所设计、制造的具有现代先进水平的仪表。
丹弗斯变频器参数表.
0 2 0
正常转矩 模式选择参数 1-00 异步 根据电机铭牌 根据电机铭牌 根据电机铭牌 根据电机铭牌 根据电机铭牌 [0]关、[1]启动完整 AMA、[2]精简 AMA 工厂推荐值 工厂推荐值 工厂推荐值 工厂推荐值 工厂推荐值 工厂推荐值 工厂推荐值 按照电机数据
0
500 0 100 15 0-250HZ 4.0-50.0HZ 0 0 100 100 100 0．10S 100 5MS 100 0 0．0048 0．0048 0 2 1 0 0 工厂推荐值 工厂推荐值 0-最大电动机电压 0-最大电动机频率
预置参考值[2] 预置参考值[3] 预置参考值[4] 预置参考值[5] 预置参考值[6] 预置参考值[7] 点动速度 加速/减速值 参考值位置 预置相对参考值 参考值来源 1 参考值来源 2 参考值来源 3 相对标定参考值源 点动速度 加减速 1 加减速 1 的类型 斜坡 1 加速时间 斜坡 1 减速时间 加减速 1 S 加减速比率 (加速时)启动 加减速 1 S 加减速比率 (加速时)终止 加减速 1 S 加减速比率 (减速时)启动 加减速 1 S 加减速比率 (减速时)终止 加减速 2 加减速 2 的类型 斜坡 2 加速时间 斜坡 2 减速时间 加减速 2S 加减速比率 (加速时)启动 加减速 2 S 加减速比率 (加速时)终止 加减速 2 S 加减速比率 (减速时)启动 加减速 2 S 加减速比率 (减速时)终止 加减速 3 加减速 3 的类型 斜坡 3 加速时间 斜坡 3 减速时间 加减速 3S 加减速比率 (加速时)启动 加减速 3S 加减速比率 (加速时)终止 加减速 3S 加减速比率 (减速时)启动
0 3RPM 0．0HZ 0 100000 10MS 4 0 0 0 0 80 50 50 10．0S 0RPM 0HZ 0
MS31xxx中文资料
MS31xxx中⽂资料Shell Size/No. of Dimensions in InchesInsert Arrange-Contacts/Digi-Key Price EachL L1N Q U V Fitting XY Amphenol ment No.Size DescriptionPart No.11050Max.Max.Ref.Max.Ref.ThreadRef.Ref.Part No.Straight Plugs with Solid Shells10SL-33/16Straight Plug w/Socket 97-3106A-10SL-3S-ND 12.008.40 6.2497-3106A-10SL-3S 10SL-42/16Straight Plugw/Socket 97-3106A-10SL-4S-ND 11.357.95 5.911-3/8—3/47/8—5/8-24——97-3106A-10SL-4S 12S-32/16Straight Plugw/Pins 97-3106A-12S-3P-ND 10.407.28 5.411-7/16—25/321—5/8-24——97-3106A-12S-3P Straight Plug w/Socket 97-3106A-12S-3S-ND 11.137.79 5.7997-3106A-12S-3S 14S-13/16Straight Plug w/Pins 97-3106A-14S-1P-ND 10.437.30 5.4397-3106A-14S-1P Straight Plug w/Socket 97-3106A-14S-1S-ND 12.308.61 6.4097-3106A-14S-1S 14S-24/16Straight Plug w/Pins 97-3106A-14S-2P-ND 10.387.27 5.401-15/32—7/81-1/8—3/4-20——97-3106A-14S-2P Straight Plug w/Socket9.026.7097-3106A-14S-2S SS RRL MKMS3100A Wall Mount ReceptacleMounting Holes .147 Dia. sizes 24,28.120 Dia.all other sizesCInsert Patterns (Front face of pin insert shown.Drawings not to scale.)SERVICE RATING:INST A D EB C Limited Operating DC 2507001250175024504200Voltages at Sea Level AC(rms)200500900125017503000TEST CURRENT: Contact Size 16 = 13 amperes, Contact Size 12 = 23 amperes NOTE: Transients were not considered in calculating these values.NOTE: Limiting operating voltage at 50,000 feet altitude are approx. 25% of the sea level values.Insert Arrangement Service Rating10SL-3A18-10A 18-11A18-12A18-16C18-19A20-4D20-29A22-14A 22-19A24-7A28-11A28-16A28-21A22-2224-1114S-716-1016-1118-1124-28INST.20-15A20-16A20-27A 20-7A,B,H,G = D C,D,E,F = A10SL-4A 12S-3A 14S-1A14S-2INST.14S-5INST.14S-6INST.18-4D18-8A18-1B,C,F,G = A all others = INST.A C BA BB AA C BD A C BE B D CA E ADCBF A EF G DCBA E D CBCB AD EFG H I J CBA D CB A D EF GH D A C BD EA CBE DB A D E F GHK JBCA D ABCDEFGHBCAD EFGA BCD EF GH I AB C D E FGHIJ K L M N A BC D EHJLK M P N TSRAB C D E F GH JLK MN P A B CD EF G HJ L KMNPO I AB C DEFG HJ LK M N U TV PSR A B C D E F G H JT Y V Q P S X R W A B C DEF G H JL K M N U W XTV IP S R ABC DEF GHJ L K M N U T V Q PS R A B C Dn p r sE F G H Jgh i k m L K M N V U W X Z R P b a c d fe T S LNAVNL N Q V MS3106A Straight Plug (97 Series)MS3108B Angle Plug (97 Series) XL 1UVQSizes 10SL, 14SVL1Q YShell is split longi-tudinally for conve-nient solder or in-spection. Frontshell is keyed to allow the 90 degree angle housing to be rotated and locked at any 45 degree increment. Underwriters Laboratories approved recognition File E115497. Canadian Standard Association Certification File LR69183 L 1MK N 1ASS R RSS R R16128Panel OpeningOCoupling ring ma-chined from solid alu-minum bar stock forhigh tensile strength.Mates with all types of 97 series receptacles.Front shell includespolarization keyway.Solid shell. Threadedbackshell.Mounting Holes.147 Dia. sizes 24,28.120 Dia. all other sizes97 Series Plugs(Continued)LKN XLKNML KZL M NBAAB CD A C IG DFEHB CA BA BC A BA BCDES SShell Size/No. of Dimensions in InchesInsert Arrange-Contacts/Digi-KeyPrice EachLL1N Q U V Fitting XY Amphenol ment No.Size Description Part No.11050Max.Max.Ref.Max.Ref.ThreadPart No.14S-55/16Straight Plug w/Pins 97-3106A-14S-5P-ND 11.608.12 6.0497-3106A-14S-5P Straight Plug w/Socket 97-3106A-14S-5S-ND 13.839.687.1997-3106A-14S-5S 14S-66/16Straight Plug w/Pins 97-3106A-14S-6P-ND 12.038.42 6.261-15/32—7/81-1/8—3/4-20——97-3106A-14S-6P Straight Plug w/Socket 97-3106A-14S-6S-ND 13.959.777.2697-3106A-14S-6S 16S-17/16Straight Plug w/Pins 97-3106A-16S-1P-ND 12.038.42 6.2697-3106A-16S-1P Straight Plug w/Socket 97-3106A-16S-1S-ND 15.4010.788.0197-3106A-16S-1S 16S-85/16Straight Plug w/Pins 97-3106A-16S-8P-ND 13.439.40 6.991-15/32—11-1/4—7/8-20——97-3106A-16S-8P Straight Plug w/Socket 97-3106A-16S-8S-ND 13.939.757.2597-3106A-16S-8S 18-110/16Straight Plug w/Pins 97-3106A-18-1P-ND 15.7811.058.2197-3106A-18-1P Straight Plug w/Socket 97-3106A-18-1S-ND 17.4512.229.0897-3106A-18-1S 18-44/16Straight Plug w/Pins 97-3106A-18-4P-ND 14.6010.227.6097-3106A-18-4P Straight Plug w/Socket 97-3106A-18-4S-ND 15.7511.038.1997-3106A-18-4S 18-84/1#12,Straight Plug w/Pins 97-3106A-18-8P-ND 17.2411.269.4497-3106A-18-8P 4/7#16Straight Plug w/Socket 97-3106A-18-8S-ND 18.6212.1610.2097-3106A-18-8S 18-104/12Straight Plug w/Pins 97-3106A-18-10P-ND 17.4812.249.0997-3106A-18-10P Straight Plug w/Socket 97-3106A-18-10S-ND 18.6212.1610.2097-3106A-18-10S 18-115/12Straight Plug w/Pins 97-3106A-18-11P-ND 17.4812.249.091-31/32—1-1/81-20——97-3106A-18-11P Straight Plug w/Socket 97-3106A-18-11S-ND 17.2411.269.4497-3106A-18-11S 18-126/16Straight Plug w/Pins 97-3106A-18-12P-ND 14.3310.037.4597-3106A-18-12P Straight Plug w/Socket 97-3106A-18-12S-ND 17.4812.249.0997-3106A-18-12S 18-161/12Straight Plug w/Pins 97-3106A-18-16P-ND 17.4812.249.0997-3106A-18-16P Straight Plug w/Socket 97-3106A-18-16S-ND 19.6412.8210.7697-3106A-18-16S 18-1910/16Straight Plug w/Pins 97-3106A-18-19P-ND 22.5214.4212.7797-3106A-18-19P Straight Plug w/Socket 97-3106A-18-19S-ND 19.2112.5410.5297-3106A-18-19S 20-44/12Straight Plug w/Pins 97-3106A-20-4P-ND 20.1613.1611.0497-3106A-20-4P Straight Plug w/Socket 97-3106A-20-4S-ND 26.3516.8714.9497-3106A-20-4S 20-78/16Straight Plug w/Pins 97-3106A-20-7P-ND 20.1613.1611.0497-3106A-20-7P Straight Plug w/Socket 97-3106A-20-7S-ND 21.6614.1411.8697-3106A-20-7S 20-157/12Straight Plug w/Pins 97-3106A-20-15P-ND 22.0914.4212.0997-3106A-20-15P Straight Plug w/Socket 97-3106A-20-15S-ND 27.7017.7315.701-7/8—1-1/41-15/32—1-3/16-18——97-3106A-20-15S 20-169/2#12,Straight Plug w/Pins 97-3106A-20-16P-ND 22.1114.4412.1197-3106A-20-16P 9/7#16Straight Plug w/Socket 97-3106A-20-16S-ND 22.5014.4012.7597-3106A-20-16S 20-2714/16Straight Plug w/Pins 97-3106A-20-27P-ND 19.7812.9210.8397-3106A-20-27P Straight Plug w/Socket 97-3106A-20-27S-ND 23.1814.8413.1497-3106A-20-27S 20-2917/16Straight Plug w/Pins 97-3106A-20-29P-ND 21.0713.7511.5497-3106A-20-29P Straight Plug w/Socket 97-3106A-20-29S-ND 25.4516.2914.4397-3106A-20-29S 22-1419/16Straight Plug w/Pins 97-3106A-22-14P-ND 24.0515.4013.6397-3106A-22-14P Straight Plug w/Socket 97-3106A-22-14S-ND 27.3217.4915.4897-3106A-22-14S 22-1914/16Straight Plug w/Pins 97-3106A-22-19P-ND 23.5815.1013.371-31/32—1-3/81-19/32—1-3/16-18——97-3106A-22-19P Straight Plug w/Socket97-3106A-22-19S-ND 24.0515.4013.6397-3106A-22-19S 24-716/2 #12,Straight Plug w/Pins 97-3106A-24-7P-ND 28.4618.2216.1397-3106A-24-7P 16/14 #16Straight Plug w/Socket 97-3106A-24-7S-ND 30.8319.7317.4797-3106A-24-7S 24-2824/16Straight Plug w/Pins 97-3106A-24-28P-ND 29.7719.0616.872-1/4—1-1/21-23/32—1-7/16-18——97-3106A-24-28P Straight Plug w/Socket 97-3106A-24-28S-ND 33.7121.5819.1097-3106A-24-28S 28-1122/4#12,Straight Plug w/Pins97-3106A-28-11P-ND 32.2720.6518.2997-3106A-28-11P 22/18#16Straight Plug w/Socket 97-3106A-28-11S-ND 34.6624.2721.6797-3106A-28-11S 28-1620/16Straight Plug w/Pins 97-3106A-28-16P-ND 33.2321.2718.842-1/4—1-3/41-31/32—1-7/16-18——97-3106A-28-16P Straight Plug w/Socket 97-3106A-28-16S-ND 33.6621.5519.0897-3106A-28-16S 28-2137/16 Straight Plug w/Pins 97-3106A-28-21P-ND 34.5424.1821.5997-3106A-28-21P Straight Plug w/Socket97-3106A-28-21S-ND38.9427.2624.3497-3106A-28-21SAngle Plugs with Split Shell10SL-33/16Angle Plug w/Socket 97-3108B-10SL-3S-ND 16.0311.228.3497-3108B-10SL-3S 10SL-42/16Angle Plugw/Socket 97-3108B-10SL-4S-ND 15.3010.717.96—1-1/2—7/815/8-24——97-3108B-10SL-4S 14S-13/16Angle Plug w/Pins 97-3108B-14S-1P-ND 13.939.757.2597-3108B-14S-1P Angle Plug w/Socket 97-3108B-14S-1S-ND 14.2810.007.4397-3108B-14S-1S 14S-24/16Angle Plug w/Pins 97-3108B-14S-2P-ND 13.809.667.1897-3108B-14S-2P Angle Plug w/Socket 97-3108B-14S-2S-ND14.9010.437.75—1-23/32—1-1/81-1/163/4-2021/32—97-3108B-14S-2S 14S-55/16Angle Plug w/Pins 97-3108B-14S-5P-ND 15.1310.597.8797-3108B-14S-5P Angle Plug w/Socket 97-3108B-14S-5S-ND 15.5510.898.0997-3108B-14S-5S 14S-66/16Angle Plug w/Pins 97-3108B-14S-6P-ND 15.5510.898.0997-3108B-14S-6P Angle Plug w/Socket 97-3108B-14S-6S-ND 15.9811.198.3197-3108B-14S-6S 18-110/16Angle Plug w/Pins 97-3108B-18-1P-ND 22.0214.3712.0697-3108B-18-1P Angle Plug w/Socket 97-3108B-18-1S-ND 24.0815.4113.65—2-5/32—1-11/321-3/161-201-41/641-41/6497-3108B-18-1S 18-44/16Angle Plug w/Pins 97-3108B-18-4P-ND 18.5012.0810.1397-3108B-18-4P Angle Plug w/Socket97-3108B-18-4S-ND19.7412.8910.8197-3108B-18-4SA(Continued)Shell Size/Dimensions in InchesInsert No. ofB Min X Min Arrange-Contacts/Digi-KeyPrice EachFull N Cable Amphenol ment No.SizeDescription Part No.11050Thread K L M Dia.R S Dim.Z Part No.3/16Plug w/Socket MS3106E-10SL-3S-ND *14.7010.297.65—.531 2.129—.896—.946.281—MS3106E-10SL-30S 3/16 Plug w/Socket MS3106F-10SL-3S-ND?16.7011.698.69—.531 2.129—.896—.946.281—MS3106F-10SL-3S 10SL-33/16Plug w/Socket MS3106R-10SL-3S-ND?15.2510.687.93—.531 1.057 1.120.807—.946——MS3106R-10SL-3S3/16Recept. w/Pins MS3102E-10SL-3P-ND *7.24 4.11 3.03.391.672.297.562.625.719 1.000—.422MS3102E-10SL-3P 3/16Recept. w/Pins MS3102R-10SL-3P-ND? 6.47 3.67 2.71.391.672.297.562.625.719 1.000—.422MS3102R-10SL-3P 2/16Plug w/Socket MS3106A-10SL-4S-ND 15.0810.567.84—.531.937———.946——MS3106A-10SL-4S 2/16Plug w/Socket MS3106E-10SL-4S-ND *16.7811.758.73—.531 2.129—.896—.946.281—MS3106E-10SL-4S 10SL-42/16Plug w/Socket MS3106F-10SL-4S-ND?14.8810.427.74—.531 2.129—.896—.946.281—MS3106F-10SL-4S2/16Recept. w/Pins MS3102E-10SL-4P-ND * 6.60 3.75 2.76.391.672.297.562.625.719 1.000—.422MS3102E-10SL-4P 2/16Recept. w/Pins MS3102R-10SL-4P-ND? 5.86 3.33 2.45.391.672.297.562.625.719 1.000—.422MS3102R-10SL-4P 4/16Plug w/Pins MS3106F-14S-2P-ND?12.808.96 6.66—.531 2.201— 1.021— 1.123.406—MS3106F-14S-2P 4/16Plugw/Socket MS3106A-14S-2S-ND 11.708.19 6.09—.531.937——— 1.123——MS3106A-14S-2S 4/16Plug w/Socket MS3106F-14S-2S-ND?16.9111.049.26—.531 2.201— 1.021— 1.123.406—MS3106F-14S-2S 14S-24/16Recept. w/Pins MS3102E-14S-2P-ND *8.82 5.30 4.12.450.672.297.562.750.906 1.188—.422MS3102E-14S-2P4/16Recept. w/Socket MS3102E-14S-2S-ND *8.74 4.96 3.66.450.672.297.562.750.906 1.188—.422MS3102E-14S-2S4/16Recept. w/Pins MS3102R-14S-2P-ND? 5.93 3.37 2.48.450.672.297.562.750.906 1.188—.422MS3102R-14S-2P4/16Recept. w/Socket MS3102R-14S-2S-ND?8.84 5.02 3.70.450.672.297.562.750.906 1.188—.422MS3102R-14S-2S5/16Plug w/Pins MS3106A-14S-5P-ND 11.588.11 6.02—.531.937——— 1.123——MS3106A-14S-5P 5/16Plug w/Socket MS3106A-14S-5S-ND 13.009.10 6.76—.531.937——— 1.123——MS3106A-14S-5S 14S-55/16Recept. w/Pins MS3102E-14S-5P-ND *7.67 4.36 3.21.450.672.297.562.750.906 1.188—.422MS3102E-14S-5P5/16Recept. w/Pins MS3102R-14S-5P-ND?9.08 5.15 3.80.450.672.297.562.750.906 1.188—.422MS3102R-14S-5P6/16Plug w/Socket MS3106A-14S-6S-ND 13.009.10 6.76—.531.937——— 1.123——MS3106A-14S-6S 6/16Plug w/Socket MS3106F-14S-6S-ND?16.8011.768.74—.531 2.201— 1.021— 1.123.406—MS3106F-14S-6S 6/16Recept. w/Pins MS3102E-14S-6P-ND *7.84 4.45 3.28.450.672.297.562.750.906 1.188—.422MS3102E-14S-6P 14S-66/16Recept. w/Socket MS3102E-14S-6S-ND *9.84 5.91 4.60.450.672.297.562.750.906 1.188—.422MS3102E-14S-6S6/16Recept. w/Pins MS3102R-14S-6P-ND? 5.49 3.12 2.30.450.672.297.562.750.906 1.188—.422MS3102R-14S-6P 6/16 Recept. w/Socket MS3102R-14S-6S-ND?9.01 5.12 3.77.450.672.297.562.750.906 1.188—.422MS3102R-14S-6S 14S-73/16Plug w/Socket MS3106F-14S-7S-ND?17.0511.139.34—.531 2.201— 1.021— 1.123.406—MS3106F-14S-7S 7/16Plug w/Socket MS3106A-16S-1S-ND 15.4810.848.05—.531.937——— 1.250——MS3106A-16S-1S 7/16Plug w/Socket MS3106F-16S-1S-ND?23.1815.1312.69—.531 2.201— 1.151— 1.250.500—MS3106F-16S-1S 16S-17/16Recept. w/Pins MS3102E-16S-1P-ND *8.49 5.10 3.97.450.672.297.562.875.969 1.281—.422MS3102E-16S-1P7/16Recept. w/Pins MS3102R-16S-1P-ND? 6.80 3.86 2.85.450.672.297.562.875.969 1.281—.422MS3102R-16S-1P 3/12 Plug w/Socket MS3106A-16-10S-ND 16.5311.578.60—.719 1.124——— 1.250——MS3106A-16-10S 16-103/12Plugw/Socket MS3106F-16-10S-ND?23.0014.7213.04—.719 2.524— 1.151— 1.250.500—MS3106F-16-10S 16-112/12Recept. w/Pins MS3102R-16-11P-ND? 6.83 3.88 2.86.625.860.484.750.875.969 1.281—.672MS3102R-16-11P10/16Recept. w/Pins MS3102E-18-1P-ND *10.20 6.12 4.76.625.891.453.750 1.000 1.062 1.375—.641§MS3102E-18-1P 18-110/16Recept. w/Pins MS3102R-18-1P-ND?10.14 6.09 4.74.625.891.453.750 1.000 1.062 1.375—.641§MS3102R-18-1P10/16Plug w/Socket MS3106A-18-1S-ND 18.1211.839.92—.719 1.219——— 1.333——MS3106A-18-1S18-115/12Recept. w/Pins MS3102E-18-11P-ND *8.68 4.93 3.63.625.891.453.750 1.000 1.062 1.375—.641§MS3102E-18-11P 20-2714/16Recept. w/Pins MS3102R-20-27P-ND?10.80 6.48 5.04.625.891.453.750 1.125 1.156 1.500—.641§MS3102R-20-27P 22-1419/16Recept. w/Pins MS3102E-22-14P-ND *11.43 6.86 5.34.625.891.453.750 1.250 1.250 1.625—.641§MS3102E-22-14P 22-1914/16Recept. w/Socket MS3102E-22-19S-ND *12.008.40 6.24.625.891.453.750 1.250 1.250 1.625—.641§MS3102E-22-19S 22-224/8Recept. w/Pins MS3102E-22-22P-ND *14.9010.437.75.625.891.453.750 1.250 1.250 1.625—.641§MS3102E-22-22P 3/#8 6/#12Recept. w/Pins MS3102R-24-11P-ND?11.658.166.06.625.953.453.812 1.375 1.375 1.750—.578§MS3102R-24-11P 24-113/#8 6/#12Plug w/SocketMS3106R-24-11S-ND?23.8315.2513.51—.7191.2911.9941.557—1.715——MS3106R-24-11SShell Size/No. of Dimensions in InchesInsert Arrange-Contacts/Digi-Key Price EachL L1N Q U V Fitting XY Amphenol ment No.Size DescriptionPart No.11050Max.Max.Ref.Max.Ref.ThreadRef.Ref.Part No.18-84/1#12,Angle Plug w/Pins 97-3108B-18-8P-ND 22.0214.3712.0697-3108B-18-8P 4/7#16Angle Plug w/Socket 97-3108B-18-8S-ND 23.3915.2712.8197-3108B-18-8S 18-104/12Angle Plug w/Pins 97-3108B-18-10P-ND 21.3813.9511.7097-3108B-18-10P Angle Plug w/Socket 97-3108B-18-10S-ND 23.3915.2712.8197-3108B-18-10S 18-115/12Angle Plug w/Pins 97-3108B-18-11P-ND 21.3813.9511.7097-3108B-18-11P Angle Plug w/Socket 97-3108B-18-11S-ND 22.0214.3712.06—2-5/32—1-11/321-3/161-201-41/641-41/6497-3108B-18-11S 18-126/16Angle Plug w/Pins 97-3108B-18-12P-ND 20.2613.2311.0997-3108B-18-12P Angle Plug w/Socket 97-3108B-18-12S-ND 21.3813.9511.7097-3108B-18-12S 18-161/12Angle Plug w/Pins 97-3108B-18-16P-ND 22.0414.3912.0797-3108B-18-16P Angle Plug w/Socket 97-3108B-18-16S-ND 24.1015.4313.6697-3108B-18-16S 18-1910/16Angle Plug w/Pins 97-3108B-18-19P-ND 27.1417.3715.3897-3108B-18-19P Angle Plug w/Socket97-3108B-18-19S-ND22.7014.5312.8797-3108B-18-19SMSwAShell Size No. of Dimensions in InchesInsert Con-AV Arrange-tacts/Digi-Key Price Each Coupling K L L1M N N1O R S Fitting Amphenol ment No.Size DescriptionPart No.11050Thread Ref.Max.Max.Ref.Ref.Ref.Ref.Ref.Ref.ThreadPart No.Receptacles With Solid Shells10SL-33/16Cable recept. w/pins97-3101A-10SL-3P-ND 14.089.867.3297-3101A-10SL-3P Box mount recept. w/pins 97-3102A-10SL-3P-ND 9.69 5.82 4.53 5/8-245/641-9/3261.649/163/411/16.81223/3215/8-2497-3102A-10SL-3P 10SL-42/16Cable recept. w/pins97-3101A-10SL-4P-ND 13.439.40 6.9997-3101A-10SL-4P Box mount recept. w/pins 97-3102A-10SL-4P-ND 8.91 5.35 4.1697-3102A-10SL-4P 12S-32/16Box mount recept. w/pins 97-3102A-12S-3P-ND 8.27 4.70 3.4697-3102A-12S-3P Box mount recept. w/socket 97-3102A-12S-3S-ND 8.88 5.04 3.713/4-205/641-15/3231/329/1625/3211/16.81213/161-3/325/8-2497-3102A-12S-3S Wall mount recept. w/pins 97-3100A-14S-1P-ND 12.008.40 6.2497-3100A-14S-1P Wall mount recept.w/socket 97-3100A-14S-1S-ND 12.308.61 6.4097-3100A-14S-1S 14S-13/16Cable recept. w/pins 97-3101A-14S-1P-ND 14.7810.357.6997-3101A-14S-1P Cable recept. w/socket 97-3101A-14S-1S-ND 15.0010.507.8097-3101A-14S-1S Wall mount recept. w/pins 97-3100A-14S-2P-ND 13.359.35 6.9597-3100A-14S-2P Wall mount recept. w/socket 97-3100A-14S-2S-ND 12.588.81 6.5497-3100A-14S-2S 14S-24/16Cable recept. w/pins 97-3101A-14S-2P-ND 14.7010.297.6597-3101A-14S-2P Cable recept. w/socket 97-3101A-14S-2S-ND 15.5510.898.0997-3101A-14S-2S Wall mount recept. w/pins 97-3100A-14S-5P-ND 13.359.35 6.957/8-205/641-15/3261/649/167/83/4.93829/321-3/163/4-2097-3100A-14S-5P Wall mount recept. w/socket 97-3100A-14S-5S-ND 12.038.42 6.2697-3100A-14S-5S 14S-55/16Cable recept. w/pins 97-3101A-14S-5P-ND 15.8511.108.2597-3101A-14S-5P Cable recept. w/socket 97-3101A-14S-5S-ND 16.5511.598.6197-3101A-14S-5S Wall mount recept. w/pins 97-3100A-14S-6P-ND 12.038.42 6.2697-3100A-14S-6P Wall mount recept. w/socket 97-3100A-14S-6S-ND 13.839.687.1997-3100A-14S-6S 14S-66/16Cable recept. w/pins 97-3101A-14S-6P-ND 16.5511.598.6197-3101A-14S-6P Cable recept. w/socket 97-3101A-14S-6S-ND 16.9311.858.8197-3101A-14S-6S Box mount recept. w/pins 97-3102A-16S-1P-ND 11.677.01 5.4597-3102A-16S-1P 16S-17/16Box mount recept. w/socket 97-3102A-16S-1S-ND 11.887.13 5.5597-3102A-16S-1S Box mount recept. w/pins 97-3102A-16S-8P-ND 11.52 6.92 5.381-205/641-15/3261/649/1617/8 1.06231/321-9/327/8-2097-3102A-16S-8P 16S-85/16Box mount recept. w/socket 97-3102A-16S-8S-ND 11.977.19 5.5997-3102A-16S-8S Box mount recept. w/pins 97-3102A-18-1P-ND 13.259.28 6.8997-3102A-18-1P 18-110/16Box mount recept. w/socket 97-3102A-18-1S-ND 12.788.95 6.6597-3102A-18-1S Box mount recept. w/pins 97-3102A-18-4P-ND 11.52 6.92 5.3897-3102A-18-4P 18-44/16Box mount recept. w/socket 97-3102A-18-4S-ND 10.407.28 5.4197-3102A-18-4S 4/1#12,Box mount recept. w/pins 97-3102A-18-8P-ND 13.259.28 6.8997-3102A-18-8P 18-84/7#16Box mount recept. w/socket 97-3102A-18-8S-ND14.4810.147.5397-3102A-18-8S Box mount recept. w/pins 97-3102A-18-10P-ND 12.308.61 6.4097-3102A-18-10P 18-104/12Box mount recept. w/socket 97-3102A-18-10S-ND 14.4810.147.531-1/8-181/81-63/641-3/83/41-1/81 1.1881-1/161-3/81-2097-3102A-18-10S Box mount recept. w/pins 97-3102A-18-11P-ND 12.308.61 6.4097-3102A-18-11P 18-115/12Box mount recept. w/socket 97-3102A-18-11S-ND 11.538.07 6.0097-3102A-18-11S Box mount recept. w/pins 97-3102A-18-12P-ND 11.207.84 5.8397-3102A-18-12P 18-126/16Box mount recept. w/socket 97-3102A-18-12S-ND 10.707.49 5.5797-3102A-18-12S Box mount recept. w/pins 97-3102A-18-16P-ND 11.738.21 6.1097-3102A-18-16P 18-161/12Box mount recept. w/socket 97-3102A-18-16S-ND 15.0010.507.8097-3102A-18-16S Box mount recept. w/pins 97-3102A-18-19P-ND19.0712.4510.4497-3102A-18-19P 18-1910/16Box mount recept. w/socket 97-3102A-18-19S-ND 13.059.14 6.7997-3102A-18-19S Box mount recept. w/pins 97-3102A-20-4P-ND 12.008.40 6.2497-3102A-20-4P 20-44/12Box mount recept. w/socket 97-3102A-20-4S-ND 14.7810.357.6997-3102A-20-4S Box mount recept. w/pins 97-3102A-20-7P-ND 12.008.40 6.2497-3102A-20-7P 20-78/16Box mount recept. w/socket 97-3102A-20-7S-ND 13.839.687.1997-3102A-20-7S Box mount recept. w/pins 97-3102A-20-15P-ND 16.0511.248.3597-3102A-20-15P 20-157/12Box mount recept. w/socket 97-3102A-20-15S-ND 20.6613.4911.3197-3102A-20-15S 9/2#12,Box mount recept. w/pins 97-3102A-20-16P-ND 14.4810.147.531-1/4-181/81-57/641-3/83/41-1/41-1/8 1.3121-5/321-1/21-3/16-1897-3102A-20-16P 20-169/7#16Box mount recept. w/socket 97-3102A-20-16S-ND 15.7511.038.1997-3102A-20-16S Box mount recept. w/pins 97-3102A-20-27P-ND 14.7810.357.6997-3102A-20-27P 20-2714/16Box mount recept. w/socket 97-3102A-20-27S-ND 14.7510.337.6797-3102A-20-27S Box mount recept. w/pins 97-3102A-20-29P-ND 16.6011.628.6497-3102A-20-29P 20-2917/16Box mount recept. w/socket 97-3102A-20-29S-ND 18.0511.789.8897-3102A-20-29S Box mount recept. w/pins 97-3102A-22-14P-ND 17.2411.269.4497-3102A-22-14P 22-1419/16Box mount recept. w/socket 97-3102A-22-14S-ND 21.0013.7111.5097-3102A-22-14S Box mount recept. w/pins 97-3102A-22-19P-ND 16.9111.049.261-3/8-181/81-63/641-3/83/41-3/81-1/4 1.4381-1/41-5/81-3/16-1897-3102A-22-19P 22-1914/16Box mount recept. w/socket 97-3102A-22-19S-ND 17.2411.269.4497-3102A-22-19S16/2#12,Box mount recept. w/pins 97-3102A-24-7P-ND 20.2813.2411.1197-3102A-24-7P 24-716/14#16Box mount recept. w/socket 97-3102A-24-7S-ND 22.7514.8512.461-1/2-181/82-1/41-3/813/161-1/21-3/8 1.5621-3/81-3/41-7/16-1897-3102A-24-7S Box mount recept. w/pins 97-3102A-24-28P-ND 22.0614.4012.0897-3102A-24-28P 24-2824/16Box mount recept. w/socket 97-3102A-24-28S-ND 24.5015.6913.8997-3102A-24-28S 22/4#12,Box mount recept. w/pins 97-3102A-28-11P-ND 22.9314.6813.0097-3102A-28-11P 28-1122/18#16Box mount recept. w/socket 97-3102A-28-11S-ND29.4818.8716.7197-3102A-28-11S Box mount recept. w/pins 97-3102A-28-16P-ND 24.0515.4013.6397-3102A-28-16P 28-1620/16Box mount recept. w/socket 97-3102A-28-16S-ND 24.2315.5113.741-3/4-181/82-1/41-3/813/161-3/41-5/8 1.8121-9/1621-7/16-1897-3102A-28-16S Box mount recept. w/pins 97-3102A-28-21P-ND 29.2718.7416.5997-3102A-28-21P 28-2137/16Box mount recept. w/socket97-3102A-28-21S-ND30.6821.4819.1897-3102A-28-21SMax.Dimensions in Inches Shell O.D.Digi-Key Price EachC D. Internal Amphenol Size Cable Description Part No.11050A B Dia.Thread E FG L Part No.Cable Clamp 97-3057-1004-ND 5.76 3.27 2.41.795.8425/165/8-24————97-3057-100410SL,Bushing 97-79-513-3-ND 1.12.67.44————.130.210.374 2.8759779-513-312S 5/16Bushing97-79-513-4-ND1.31.79.51————.220.302.500 2.7509779-513-4Cable Clamp w/Bushing97-3057-1004-1-ND*7.00 3.98 2.93.795.8425/165/8-24.220.302.500 2.75097-3057-1004-1*Cable Clamp 97-3057-1007-ND 5.58 3.34 2.18.850.9957/163/4-20————97-3057-100712SL,7/16Bushing97-79-513-6-ND 1.27.76.50————.312.427.614 2.6259779-513-614SCable Clamp w/Bushing97-3057-1007-1-ND 7.07 4.01 2.96.850.9957/163/4-20.312.427.614 2.62597-3057-1007-1Cable Clamp 97-3057-1008-ND 6.40 3.63 2.68.920 1.1209/167/8-20————97-3057-1008-116,16S 9/16Bushing97-79-513-8-ND 1.04.63.41————.437.552.739 2.5009779-513-8Cable Clamp w/Bushing97-3057-1008-1-ND 7.47 4.24 3.13.920 1.1209/167/8-20.437.552.739 2.50097-3057-1008-1Cable Clamp 97-3057-1010-ND 5.43 3.08 2.27.920 1.2165/81-20————97-3057-1010185/8Bushing97-79-513-10-ND 1.12.67.44————.562.615.889 2.3759779-513-10Cable Clamp w/Bushing97-3057-1010-1-ND 6.37 3.61 2.66.920 1.2165/81-20.562.615.889 2.37597-3057-1010-1Cable Clamp 97-3057-1012-ND 5.43 3.08 2.27.927 1.4033/41-3/16-18————97-3057-101220,223/4Bushing97-79-513-12-ND 1.23.74.48————.625.740 1.084 2.2509779-513-12Cable Clamp w/Bushing97-3057-1012-1-ND 6.50 3.69 2.72.927 1.4033/41-3/16-18.625.740 1.084 2.25097-3057-1012-1Cable Clamp 97-3057-1016-ND 5.90 3.35 2.47 1.015 1.68315/161-7/16-18————97-3057-1016**24,2815/16Bushing 97-79-513-12-ND 1.23.74.48————.625.740 1.084 2.2509779-513-12Bushing97-79-513-16-ND 1.66.99.65————.750.927 1.309 2.1259779-513-16Cable Clamp w/Bushing97-3057-1016-1-ND**8.384.753.50 1.015 1.68315/161-7/16-18————97-3057-1016-1**CBADInternal ThreadFor jacketed cable or wires protected by tubing.Both clamping halves float for maximum strain relief. For unjacketed cable or wires, use corresponding MS3420 bushing. Clamp and bushing can be ordered together. Two telescoping bushings are furnished with shell sizes 24 and larger.Accessories For 97 Series ConnectorsL.063.02G45°FERubber bushing specifically designed for MS3057A type cable clamp. Can also be used as a reducing bushing. Order separately or with cable clamp.97 Series Receptacles* When Clamp and bushing are ordered together for shell sizes 10SL and 12S, bushing 97-79-513-4 will be furnished.**Two telescoping bushings (97-79-513-12 and 97-79-513-16) are furnished with each cable clamp for shell sizes 24 and 28. BushingCable ClampMS3075A TypeMS3420 TypeA。
HT162x系列LCD驱动器的应用指南说明书
HT162x Application GuidelinesD/N：AN0468EIntroductionHoltek’s HT162x series of devices are a range of LCD drivers which can drive multipledisplays and which can also directly map their internal RAM to the LCD correspondingLCD display. These devices also include serial communication, a WDT and Time Basefunctions. A tone function provides a fixed frequency output and an integrated powersaving mode greatly reduces power consumption, making the devices suitable for LCDdisplay driving product applications such as meters, home appliances, carinstrumentation and industrial instrumentation.This guideline will first introduce the HT162x series LCD driving MCUs principles ofoperation and then introduce some application methods and notes.Functional DescriptionAccording to LCD driving principles, an AC voltage needs to be applied to both COM andSEG pins to drive the LCD. If only a DC voltage is applied to an LCD segment then theliquid crystal may experience permanent damage over time. The LCD display contrast isdetermined by the RMS value of the voltage on the COM pin minus the voltage applied tothe SEG pin. This differential RMS voltage must be greater than the LCD saturationvoltage for the pixel to be on and less than the threshold voltage for the pixel to be off.The LCD driver will generate the simulation drive waveform required for LCD lighting byusing system control, and the corresponding pixel to achieve a display effect.The HT162x series will provide multiple COM and SEG output selections for different LCDdisplays. The specific differences are indicated in the following selection table.The HT162x series selection table ：HT1620 HT1621 HT1622 HT16220 HT1623 HT1625 HT1626 Operation Voltage 2.4~3.3V 2.4~5.2V 2.7~5.2V 2.7~5.2V 2.7~5.2V 2.7~5.2V 2.7~5.2V LCD Voltage3/2 V DD ≤ V DD ≤ V DD ≤ V DD ≤ V DD ≤ V DD ≤ V DD Display RAM32×4 bits 32×4 bits 64×4 bits 64×4 bits 96×4 bits 128×4 bits192×4 bits COM4 4 8 8 8 8 16 SEG32 32 32 32 48 64 48 Bias1/2 or 1/3 bias 1/2 or 1/3 bias 1/4 bias 1/4 bias 1/4 bias 1/4 bias 1/5 bias Duty1/2 or 1/3 or 1/4 duty 1/2 or 1/3 or 1/4 duty 1/8 duty 1/8 duty 1/8 duty 1/8 duty 1/16 duty Built-in Osc.― √ √ ― √ √ √ Crystal Osc. √ √ ― √ √√ √ Operating PrinciplesThe HT162x series LCD driving MCUs support serial communication. The master can carry out READ, WRITE, READ-MODIFY-WRITE operations by sending the corresponding configuration commands and also set the LCD screen display effects by setting the operating frequency, Time Base, WDT, LCD On/Off etc. The HT162x series communication modes and some functional operations will be described in the following section. HT162x Serial CommunicationThe HT162x series supports serial communication which contains three serial communication pins RD , WR , DATA, and a chip select signal CS pin. The pin functions are shown in the following table:Reading and writing data and writing command operations are carried out on the DATA pin. The RD pin is a READ clock input pin. The data is output on the DATA pin at the falling edge of the RD signal. The master can read data between the rising edge of the RD signal and the next falling edge when RD is high.The WR pin is a WRITE clock input pin. The Data, address, and command on the DATApin are written to the HT162x at the rising edge of the WR signal.When writing to the HT162x, the input clock for the write command or data is derived fromthe WR pin. The timing diagram for writing data is as follows:To read display the RAM data from the HT162x, the READ input clock is derived from theRD pin. The timing diagram for reading data is as follows:HT162x READ/WRITE OperationsBefore the HT162x operates, it needs to send an operation code to indicate what kind ofstatus is required for operation. The operation codes are defined in the following table.Operation Status Operation CodeREAD Data 110WRITE Data 101READ - MODIFY -WRITE Data 101Control Command 100The process to writing a single section of RAM data is shown as follows:DATA 1 0 1 A5 A4 A3 A2 A1 A0 D0 D1 D2 D3A write data operation should first place data on the DATA pin and then generate aWRITE clock signal on the WR pin. After this the data should be presented bit by bituntil all of them have been written. During the write process, first send an operation code101, indicating that a write operation is to be execute, after which the correspondingdisplay RAM address code A5~A0 should be sent. D0~D3 is the corresponding displaydata to write display data to LCD. If the bit is "1", it will illuminate the correspondingdisplay bit, while for a "0", the corresponding bit will not be displayed.The process for continuously writing RAM data is shown as follows:DATA 1 0 1 A5A4A3A2A1ADD1D2D3DD1D2D3 D0 … Memory Address (MA) Data(MA) Data(MA+1) …A continuous write operation requires only the start address, which will automatically be incremented by one after the operation has completed. During a read process, except for different operation codes, the READ clock input is the RD pin.HT162x Timer and WDT FunctionsTimer and WDT StructureThe Time base generator and WDT share the same divided counter. The Time base generator can be enabled by the TIMER EN or WDT EN command. When the IRQ EN and WDT EN commands are enabled, the system clock will pass through WDT module after passing through the Time base generator. Once a WDT time-out occurs, the IRQ pin will remain at a logic low level until the CLR WDT or the IRQ DIS command is issued. If the TIMER EN command is enabled, the system clock will be directly output on the IRQ pin after passing through Time base generator. The IRQ pin will be disabled and remain in a floating state following an IRQ DIS command.If an external clock is selected as the system clock source, the SYS DIS command is invalid and the power down mode will not be entered. In the Power down mode, the Time base and WDT functions are disabled.HT162x Tone OutputThe Tone output function provides a fixed frequency output driving signals on the BZ and BZ pins for driving piezoelectric buzzers or for applications that require a fixed frequency.A 4kHz or 2kHz output frequency can be selected by software using the TONE 4K or TONE 2K commands. Once the system clock is disabled or the Tone output function is switched off, the BZ and BZ output will remain at a low level. The following table lists the related control commands for Tone output functions. TONE ON is the specific TONE output command for the HT1621. Other HT162x series MCUs only need to turn on the Tone output function to output the corresponding frequency by directly software configuring the TONE 4K or TONE 2K commandsHT162x LCD Driving OperationThe HT162x series provide multiple SEG and COM selections for driving different LCD display screens. The following section will take the HT1621 as an example to show how the HT1621 drives an LCD.The HT1621 is a 128 pattern (32×4) LCD driver, which can be configured with 1/2 or 1/3 Bias and 1/2, 1/3 or 1/4 Duty by software to make it suitable for multiple LCD display types. T he LCD driving clock is derived from the system clock, which can be a selected external clock, a 32768 crystal oscillator or an internal RC oscillator.The master can send the BIAS and COM commands to the HT1621 and set the BIAS and Duty of the driving waveform. LCD ON/OFF commands are used to control the on/off switching of the LCD bias generator to control the LCD display. The related configuration commands for the HT1621 LCD driver are shown in the following table:Operation OperationCode CommandCode Status FunctionPower-onResetLCD OFF 100 0000-0010-X Command Turn off LCD output function Yes LCD ON 100 0000-0011-X Command Turn on LCD output functionBIAS &COM 100 0010-abXc-X Command c=0: 1/2 bias optionc=1: 1/3 bias optionab=00: 2 commons option ab=01: 3 commons option ab=10: 4 commons optionHardware DescriptionApplication CircuitsThe HT162x driving MCUs will be connected to the master interface with 4 or 5 wires,which can realise communication between the master and the driving MCUs to control theLCD display. Taking the HT1621 as an example, the application circuit is shown in thefollowing figure.Note: The connection of the IRQ and RD pins can be selected according to the specific MCU requirements.The voltage applied to the power pin VLCD must be equal or lower than V DD.Adjust VR to match the user LCD panel display voltage (VLCD)The power pins VDD and VLCD should be connected to a 1µF filter capacitor. Thecapacitor should be located as close the pins as possible.In order to obtain an accurate frequency, the C1 and C2 capacitors can be increased invalue. The capacitors value should be determined according to the crystal oscillator error.Refer to the values in the following table.Crystal oscillator error Capacitor value±10ppm 0~10p10~20ppm 10~20pSoftware DescriptionHT162x Operation flowInitialisationThe initialisation flow chart for HT162x is shown in the following figure. After the systemhas been powered on, first select the 32.768kHz crystal oscillator, the internal RCoscillator or the external clock as the system clock source. Then set the Timer and WDTfunctions according to the actual design requirements. The IRQ output function will bedisabled by default after power on. After setting the LCD Bias and Duty values, turn onthe system oscillator using the SYS EN command. Finally, clear the LCD display RAMand then turn on the LCD bias generator. If the LCD bias generator is switched on withoutfirst clearing the LCD display RAM, the value of the display RAM will be indeterminateand garbled characters will appear.Display RAM Read/Write OperationsFor display RAM read/write operations, it is only necessary to write the first address. Users can directly read/write to the corresponding address of the display RAM data, the address is automatically incremented by one after the operation has completed. Users can continue to read/write to the display RAM data of the next address. The read/write operation flow chart is shown in the following figure.Application NotesFirst clear RAM in the initialisation processDuring initialisation, the HT162x must first clear the LCD RAM and then turn on the LCDdisplay by sending out an LCD On command. This will avoid garbled charactersappearing on the LCD after power-on. The main reasons for this are as follows.After the HT162x is powered on, the internal LCD RAM data is indeterminate. The LCDRAM data is directly mapped to the LCD driver. If the LCD RAM content is not firstcleared to zero, the LCD On command will be directly sent to turn on the LCD Biastransmitter, which will cause LCD to display garbled characters.Therefore before sending LCD On command, turn off all the display points by writing zeroto all the LCD RAM values. After clearing RAM is complete, send an LCD On command toturn on the LCD bias generator to avoid garbled characters.Power Down OrderIn practical applications, if power is separately supplied on the VLCD and VDD pins, it isrecommended to turn off the LCD driving voltage V LCD before turning off the logic supplyvoltage V DD during power-down. This will prevent the LCD display from displaying garbledcharacters due to different power-down sequences when VDD pin is powered off for thefollowing reasons:First turn off the V DD and then turn off the V LCD. V DD is the IC internal logic power supply.After V DD has been turned off, the HT162x internal LCD bias generator will stop working.COM is the scan signal whose level will stay at a certain level and whose power comesfrom V LCD. If there is a voltage on the VLCD pin, the COM and SEG pins will have adropout voltage caused by the garbled characters.It is recommended to turn off the LCD display by sending an LCD Off command beforeVDD is powered down. Both the COM and SEG pins are set high and even if there isvoltage on the VLCD pin, it will not cause garbled characters to appear on the LCD. ConclusionThis guideline describes applications for the HT162x series LCD driving MCUs, users canuse the HT162x to drive the LCD display according to the specific designs.Version and Modification InformationDate Author Issue and Revision2017.10.26 Aidi Lan(蓝爱娣) First Version DisclaimerAll information, trademarks, logos, graphics, videos, audio clips, links and other itemsappearing on this website ('Information') are for reference only and is subject to change atany time without prior notice and at the discretion of Holtek Semiconductor Inc.(hereinafter 'Holtek', 'the company', 'us', 'we' or 'our'). Whilst Holtek endeavors to ensurethe accuracy of the Information on this website, no express or implied warranty is givenby Holtek to the accuracy of the Information. Holtek shall bear no responsibility for anyincorrectness or leakage.Holtek shall not be liable for any damages (including but not limited to computer virus,system problems or data loss) whatsoever arising in using or in connection with the use ofthis website by any party. There may be links in this area, which allow you to visit thewebsites of other companies. These websites are not controlled by Holtek. Holtek willbear no responsibility and no guarantee to whatsoever Information displayed at such sites.Hyperlinks to other websites are at your own risk.Limitation of LiabilityIn any case, the Company has no need to take responsibility for any loss or damagecaused when anyone visits the website directly or indirectly and uses the contents,information or service on the website.Governing LawThis disclaimer is subjected to the laws of the Republic of China and under the jurisdictionof the Court of the Republic of China.Update of DisclaimerHoltek reserves the right to update the Disclaimer at any time with or without prior notice,all changes are effective immediately upon posting to the website.。
PHOENIX CONTACT MKDS 3 2-5,08 15-位版 PC 接线板商品说明书
Extract from the onlinecatalogMKDS 3/ 2-5,08Order No.: 1711725The illustration shows a combination as a 15-position versionhttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1711725PC terminal block, Nominal current: 24 A, Nom. voltage: 250 V,Pitch: 5.08 mm, Number of positions: 2, Type of connection: Screw connection, Assembly: Soldering, Conductor/PCB connection direction: 0 °, Color: green, The article can be aligned to createdifferent nos. of positions!http://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsLength11.2 mmHeight18 mmPitch 5.08 mmDimension a 5.08 mmNumber of positions2Pin dimensions0,9 x 0,9 mmPin spacing15.24 mmHole diameter 1.3 mmScrew thread M3Tightening torque, min0.5 NmTightening torque max0.6 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kVRated surge voltage (III/2) 4 kVRated surge voltage (II/2) 4 kVRated voltage (III/2)400 VRated voltage (II/2)630 VConnection in acc. with standard EN-VDENominal current I N24 ANominal voltage U N250 VNominal cross section 2.5 mm²Maximum load current28 A (with 4 mm² conductor cross section) Insulating material PAInflammability class acc. to UL 94V0Internal cylindrical gage A3Stripping length8 mmConnection dataConductor cross section solid min.0.2 mm²Conductor cross section solid max. 4 mm²Conductor cross section stranded min.0.2 mm²Conductor cross section stranded max. 2.5 mm²Conductor cross section stranded, with ferrule0.25 mm²without plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm²without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm²with plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm²with plastic sleeve max.Conductor cross section AWG/kcmil min.24Conductor cross section AWG/kcmil max122 conductors with same cross section, solid min.0.2 mm²2 conductors with same cross section, solid max. 1.5 mm²0.2 mm²2 conductors with same cross section, strandedmin.1.5 mm²2 conductors with same cross section, strandedmax.0.25 mm²2 conductors with same cross section, stranded,ferrules without plastic sleeve, min.0.75 mm²2 conductors with same cross section, stranded,ferrules without plastic sleeve, max.0.5 mm²2 conductors with same cross section, stranded,TWIN ferrules with plastic sleeve, min.1.5 mm²2 conductors with same cross section, stranded,TWIN ferrules with plastic sleeve, max.Certificates / ApprovalsCertification CCA, CSA, CUL, GL, GOST, SEV, UL CSANominal voltage U N300 VNominal current I N10 AAWG/kcmil28-12CULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-12ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-12AccessoriesItem Designation DescriptionAssembly1703047RZ 1,25-MKDS 3Pitch spacer, for adjusting the pitches between MKDS andGMKDS terminal blocks in mixed rows, 1.25 mm thickGeneral1733169EBP 2- 5Insertion bridge, fully insulated, for plug connectors with 5.0 or5.08 mm pitch, no. of positions: 2Marking1051993B-STIFT Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm0804293SK 5,08/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocks0805085SK 5,08/3,8:SO Marker card, special printing, self-adhesive, labeled acc. tocustomer requirements, 12 identical marker strips per card, max.25-position labeling per strip, color: white0805412SK 5,08/3,8:UNBEDRUCKT Marker cards, unprinted, with pitch divisions, self-adhesive, 10-section marker strips, 12 strips per card, can be labeled with theM-PENTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalDiagrams/DrawingsDrilling plan/solder pad geometryDimensioned drawingAddressPHOENIX CONTACT Deutschland GmbHFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 12000Fax +49 5235 3 41200http://www.phoenixcontact.de© 2010 Phoenix ContactTechnical modifications reserved;。
DS3网络适配器介绍
DS3网络适配器介绍广播电视领域的SDH网起着公共的物理传输平台的作用，在此平台上一部分带宽用来传输经数字终端设备（CODEC）编解码的广播电视节目，另一部分用来直接传输用户数据或是传输从ATM、IP交换机汇聚来的数据流等网络适配器，它的作用就是将SDH定义的数据的电气接口（E1、DS3、STM- 1）和DVB定义的数据电气接口（ASI、SPI）的相互转换，然后进行速率的匹配。
由于DVB定义的TS流的速率是可变的，而SDH/PDH定义的接口速率是固定的，实现两者之间的速率匹配方法一般是在TS流中添加空包来适应SDH的接口速率或者将SDH信号中的空包滤除来适应TS流。
数字电视系统与模拟电视系统不同，视频和音频信号经过编码后变为串行比特流形式，模拟电视中的行、场等信息在这里已不存在。
SDH技术传输广播电视信号时要求SDH网较好的时钟同步性能和低抖动性能，网络的同步性能差会引起指针调整，指针调整将导致彩色电视信号瞬时变色，而网络的低抖动性能将通过SDH网传递给解码器在解码器输出端产生抖动引起信号色彩的变化；目前主要采用比特泄漏技术来减少指针调整的问题，或者在SDH信号进入映射器前将时钟信号和数据信号分离使数据信号经过映射器后再和时钟信号合成，但这种方法需对SDH设备作较大的改动。
消除抖动的有效办法就是选用不引入抖动的SDH设备和能容忍抖动的图像编解码器等。
SDH技术主要是为传输话音和数据业务而制定的，对视频业务而言，SDH技术还存有许多不足之处，有待于今后在实践中不断完善，从而使其更加适合于广播电视信号的传输。
DS3/ASI网络适配器DS3/ASI网络适配器，是SDH 网和HFC 网络DVB 平台之间的配接设备。
适用于SDH网的DS3 端口信号和符合DVB 的ASI 信号之间进行转换。
双向适配。
功能描述●符合DVB-ASI、DS3 接口标准,●用于DVB 和SDH 前端的接口设备，在节目发送部分可用于DS3发送器，将MPEG-2 格式的TS 流转为DS3 数据流进行传输，●在节目接收部分可以作为DS3 接收器，把从传输设备上接收的DS3 数据流还原成MPEG-2 TS 流●输入信号接口自动识别, 带自动纠错功能.技术参数输入特性●ASI-TS 输入接口阻抗（BNC 75Ω）●DS3 输入接口阻抗（BNC 75Ω）●ASI-TS 接口输入速率270 Mbps●DS3 接口输入速率44.736Mbps●传输介质同轴电缆●RJ45,RS-232C 网管通讯接口输出特性●ASI-TS 环通输出接口阻抗（BNC 75Ω）●DS3 环通输出接口阻抗（BNC 75Ω）●DS3 环通输出接口输出速率44.736Mbps●ASI-TS 接口输出速率270 Mbps应用EVNA-D型网络接口适配器是专门为数字电视网络前端和通信网络分前端设计的高性价比产品，完成TS码流与SDH/PDH网络之间DS3接口适配与协议转换。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Maxim Integrated Products 1
For pricing, deliveryact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at .
♦ ♦ ♦
Ordering Information
PART DS33X162DK TYPE Demo card, T3/E3, T1/E1
♦ ♦ ♦
Demo Kit Board
Demo Kit Contents
DS33X162DK Main Board Dual-Port 10/100Mb Ethernet Card Single-Port 10/100/1000Mb Ethernet Card 5V 2.5A Power Supply USB Cable, RS232 Cable T3/E3 BNC-to-2-Pin Adapter CD-ROM ChipView Software and Manual DS33X162DK Data Sheet Configuration Files
Rev: 031008
2 of 78
元器件交易网
________________________________________________________________ DS33X162DK List of Figures
Figure 1-1. DS33X162 System Floorplan.................................................................................................................... 4 Figure 1-2. DS33X162DK Board Floorplan—Main Board ........................................................................................... 4
元器件交易网
Rev: 031008
DS33X162 Demo Kit
General Description
The DS33X162 demo kit (DK) is an easy-to-use evaluation board for the DS33X162 Ethernet-overPDH device. The demo kit contains an option for either T3/E3 or T1/E1 serial links. All serial links are complete with line interface, transformers, and network connections. Maxim’s ChipView software is provided with the demo kit, giving point-and-click access to configuration and status registers from a Windows®-based_PC. On-board LEDs indicate receive loss-of-signal, queue overflow, Ethernet link, Tx/Rx, and interrupt status.
8. 9.
COMPONENT LIST ..........................................................................................................16 SCHEMATICS ..................................................................................................................23
7.
7.1 7.2 7.3
ADDITIONAL INFORMATION/RESOURCES ..................................................................15
DS33X162 INFORMATION .............................................................................................................15 DS33X162DK INFORMATION ........................................................................................................15 TECHNICAL SUPPORT ....................................................................................................................15
Windows is a registered trademark of Microsoft Corp.
Features
♦ ♦ Demonstrates Key Functions of DS33X162 Ethernet Transport Chipset Includes DS26528 T1/E1 Transceiver, DS3174 T3/E3 Transceiver, Transformers, BNC, and RJ48 Network Connectors and Termination Includes Ethernet PHY Supporting 10/100 and Gigabit Modes Provides Support for Hardware and Software Modes On-Board MMC2107 Processor and ChipView Software Provide Point-and-Click Access to the DS33X162, DS26528, DS3174, and PHY Registers All DS33X162 Interface Pins are Easily Accessible for External Data Source/Sink LEDs for Loss-of-Signal, Ethernet Link, Tx/Rx, and Interrupt Status Easy-to-Read Silkscreen Labels Identify the Signals Associated with All Connectors, Jumpers, and LEDs
BASIC DS33X162 INITIALIZATION ....................................................................................................7 MONITOR AND CAPTURE ETHERNET TRAFFIC ...................................................................................8
POWERING UP THE DEMO KIT ..........................................................................................................7
General .................................................................................................................................................. 7 Additional Configuration for DS33X162 ................................................................................................. 8 4.1.1 4.2.1
5. 6.
6.1 6.2 6.3 6.4
LEDS, CONFIGURATION SWITCHES, JUMPERS, AND CONNECTORS .......................9 REGISTER ACCESS........................................................................................................14