PACDN044Y4中文资料
XARP-04V中文资料
Header wafer is made of glass-filled PA66 nylon thus effective against the solder crack problem.
• Low insertion force
Headers with polarizing bosses are also available.
Specifications –––––––––––––––––––
• Current rating: 3A AC DC (AWG#20) • Voltage rating: 250V AC DC • Temperature range: -25˚C to +85˚C
XAP-08V-1 XARP-08V
XAP-09V-1 XARP-09V
XAP-10V-1 XARP-10V
XAP-11V-1 XARP-11V
XAP-12V-1 XARP-12V
XAP-13V-1 XARP-13V
XAP-14V-1 XARP-14V
XAP-15V-1 XARP-15V
–
XARP-18V
Crimp
2.5mm
(.098") pitch
XA CONNECTOR Disconnectable Crimp style connectors
Emboss Tape Radial Tape
Features ––––––––––––––––––––––––
• Locking device
The housing has a locking device to securely hold the header, preventing accidental disconnection because of external forces that might result from the routing of wires during assembly process or of vibration.
PACDN046MR中文资料
11/26/03
元器件交易网
PACDN042/43/44/45/46
Ordering Information
PART NUMBERING INFORMATION
Standard Finish
Bumps
Package
Ordering Part Number1
Part Marking
PACDN042
GND 3
PACDN043
4
3
PACDN044T
GND
GND
8
7
6
5
1
2
SOT23-3 SC70-3
PACDN044Y
5
4
1
2
GND
SOT-143
PACDN045
6
5
4
1
2
3
4
GND
GND
TSSOP-8
PACDN046
GND
8
7
6
5
1
2
3
GND
SOT23-5 SC70-5
1
2
3
GND
• Compact SMT package saves board space and facilitates layout in space-critical applications
• In-system ESD protection to 20kV contact discharge, per the IEC 61000-4-2 international standard
• Protection of interface ports or IC pins which are exposed to high ESD levels
CC4H-4S中文资料
Multiport Analog Modem CardBenefits• High-density , V .92 connections • V .34/33.6K Super G3 fax with Error Correction Mode • Supports leading remote access and fax software • Universal PCI and PCI ExpressThe MultiModem ® ISI server card is ideal for small- to mid-sized companies requiring analog dial-up remote access or a dedicated fax server solution. It provides up to eight built-in V .92/56K modems for cost-effective,high-density , server-based remote access. The MultiModem ISI server card also offers V .34/33.6K Super G3 fax and Error Correction Mode, that can reduce fax transmission time by more than half when compared to traditional fax modems.Features• Four or eight integrated V .92/56K modems• V .92/56K download speeds and 48K upload speeds when connecting with V .92 servers • Class 1.0 and Class 2.1 faxing at speeds to V .34/33.6K bps (Super G3)• Error Correction Mode (ECM) provides fast and reliable fax transmissions • V .44 compression improves data throughput rates • U.S. Caller ID reporting• Sustained data rates to 460.8K per port • Phone cables included• Compatible with Windows ® 2000/XP/2003/Vista/2008 (32-bit/64-bit) and Linux • Up to 4 cards per server• Remote configuration for centralized setup and mangement • 3.3V and 5V Universal PCI or PCI Express models • Compatible with PCI-X slot (Universal PCI models)• Flash memory for easy updates • T wo-year warrantyMultiModem ®ISIWorld Headquarters Tel: (763) 785-3500 (800) EMEA Headquarters Multi-Tech Systems (EMEA)United KingdomTel: +(44) 118-959 7774Multi-Tech Systems (EMEA) FranceTel: +(33) 1 49 19 22 06HighlightsCost-Effective & Scalable. The MultiModem ISI server card provides four or eight dial-up sessions using only one server slot. When demand exceeds one modem card, you can simply add up to three additional cards.V.92 Dial-out Connections. The MultiModem ISI server card supports V .92/56K dial-out and V .34/33.6K dial-inconnections. With V .92 dial-out, you can achieve an upload speed of 48K bps (30% increase over V .90 modems).Enhanced Fax Features. The MultiModem ISI server card supports V .34 fax and Error Correction Mode providingsignificant performance and reliability enhancements over previous fax standards. V .34 sends and receives faxes at speeds up to 33.6K, more than double the speed of the V .17/14.4K fax standard. Error Correction Mode adds reliablility while increasing performance of faxtransmissions. Together these enhancements increase the performance of the MultiModem ISI server card to levels previously only found in more expensive dedicated fax boards and machines.V.44 Compression. V .44 compression standard improves V .42bis data compression anywhere from 20 to 60%, up to as much as 200% for certain types of highly compressible data. This compression technique enables data throughput rates of higher than 300K bps.Simplify Remote Access. The fully-integrated MultiModem ISI server card is easy to set up and manage. You only have to connect the phone lines. There are no external modems and power cords to hassle with; plus it saves back office space since the modems are on the prehensive Service and Support. The Multi-Techcommitment to service means we provide a two-year product warranty and service that includes free telephone technical support, 24-hour web site and ftp support.Ordering InformationProductDescriptionRegion ISI5634UPCI/8 V .92, 8-Modem Card - Universal PCI Global ISI5634UPCI/4 V .92, 4-Modem Card - Universal PCI Global ISI9234PCIE/8 V .92, 8-Modem Card - PCI Express Global ISI9234PCIE/4V .92, 4-Modem Card - PCI ExpressGlobalSpecificationsModemData: V .92, V .90, enhanced V .34, V .32bis, V .22bis Error Correction: V .42, MNP Class 3 & 4Data Compression: V .44, V .42bis, MNP Class 5FaxStandards: V .34, V .17, V .29, V .27ter, V .21, T.30, T.30Annex A, T.30 Annex F , T.31, T.31 Annex B, T.32 Annex C, TR29.2 Class 2 RecommendationRates: 33.6K, 31.2K, 28.8K, 26.4K, 24K, 21.6K, 19.2K, 16.8K, 14.4K, 12K, 9600, 7200, 4800, 2400, 300 bps Error Correction: ECMCompression: MH (T.4), MR (T.4), & MMR (T.6)Conversion: Real time (on-the-fly) compression conversionCommands: Class 1, 2, 1.0, 2.0, 2.1Bus Type3.3V & 5V Universal PCI or PCI Express (x1)Operating System SupportWindows 2000/XP/2003/Vista/2008 (32-bit/64-bit) & LinuxCablingFan out cable with 1 or 2 RJ45 connectors & 4 or 8 RJ11 connectorsPhysical DescriptionUniversal PCI Models:13.87" L × 4.97" W; 8.7 oz (35.2 cm × 12.6 cm; 247 g)PCI Express Models:13.87" L × 4.97" W; 8.5 oz (35.2 cm × 12.6 cm; 241 g)Operating EnvironmentTemperature Range: +23° to +140° F (-5° to +60° C)ApprovalsCE MarkEMC: FCC Part 15 Class B, EN 55022, EN 55024Safety: UL/cUL 60950-1, EN 60950-1, AS/NZS 60950:2000, CCCTelecom: 47CFR Part 68, CS03, TBR21Other countries also includedCopyright © 2008 by Multi-Tech Systems, Inc. All rights reserved.6/08 86000323Made in Mounds View, MN, U.S.A.Features and specifications are subject to change without notice.Trademarks / Registered Trademarks: MultiModem, Multi-Tech, and theMulti-Tech logo: Multi-Tech Systems, Inc. / All other products and technologies are the trademarks or registered trademarks of their respective holders.。
Parker Hannifin 紧固体管道产品分类及说明说明书
Equipment EQUIPMENTVisit Crimpsource at/crimpsource, your onlineresource for hose crimp specifications.MinikrimpKarrykrimpPumps C-18332T -115V C-20Hose Cut-Off Machine Hose Cut-Off Machine239 and 339 C-20DE100 C-11TH8-D206 C-12432-115V C-22881540 C-21316 C-21TH11-1 C-21TH9-1 C-2280C-0DR and 83C-0DR C-22Hose Oil C-23Lubricant C-23601069 C-23Handycut - Hose Cut-Off Machine Push-Lok Cut-Off & Assembly Tool Hose Cut-Off ToolHose Cut-Off T oolHose Insertion Depth BlocksFittings Push-On StandDie Storage RacksSwivel Die RackHose OilHose PerforatorTH2-7M25-6, TH2-7M25-8 C-24Karrykut - Hose Cut-Off Machine Hose Cut-Off MachineHose Assemblies Are Easy With the Parkrimp System.ease of use and rugged durability.provide a smooth, even, 360-degree crimp.Bottom-loading operation makes it easy to handle long hose assemblies.Parker’s exclusive Parkalign™ feature positions the fitting in the dies perfectly every time.together. No loose parts to mismatch or misplace.Dies are color-coded by size for easy identification and reduced set-up time.With Parkrimp, you benefit from a full length crimp.No-Skive hoses and fittings combine with the Parkrimp system to create high quality, reliable hydraulic hose assemblies every time.Our low profile design makes routing hose assemblies easy.tool kits.N/AExample:Hose 451TC-4 Fitting43 Series Die Body Color Silver Die Cavity Color (-4)REDSelecting the right die.Once the proper Parker Hose and Fitting is selected that meets your application requirements, you will need to select the proper die to assemble them together. Based on the hose size and approved fitting, select the proper color coded die, as called out in the chart below.Reference pages C-6 through C-12 for specific tool information regarding hose, fitting, and crimper combinations.• Portable, compact rugged design• Numerous power unit options available• Pivoting pusher design for easy die change out • For use with 25, 26, 43, 81, and HY Series fittingsSpecificationsKarrykrimp Features• Compact bench mount design • Engineered for optimal durability• All in one crimper and power unit design• For use with 25, 26, 43, 81, and HY Series fittingsSpecifications• Dimensions: 26” wide, 20” deep, 25” high • Weight: 275 lbs (with power unit)• Rating: 30 ton force @ 3,000 psi maximum • Full Cycle Time: 20 seconds • Hydraulic Fluid: AW32 oilNote: Includes a 115/230 volt, 1 phase, 60 hertz power unitwired for 115V. This unit comes with a 20 AMP male plug and must be run on a dedicated 20 AMP circuit.SilverBlackSilver BlackSilverSilverBlackFor a new decal, contact Parker at: 1-800-C-PARKER.Parkrimp 1/Karrykrimp Hose Die Selection ChartEquipment Catalog 4410 USNote:• For crimp instructions, see pages C-14 and C-15.• Hose assemblies must be inspected for cleanliness and free of all foreign particles.• Parker Hannifin will not accept responsibility for the operation of, or provide warranty coverage for, a crimper that is operated by a power unit other than equipment supplied by Parker Hannifin for the express purpose of operating the crimper.Karrykrimp 2Features• Portable, compact rugged design• Numerous power unit options available• Crimps both steel and stainless steel fittings • For use with 25,26, 43, 70, 71, 73, 78, 81, and HY Series fittngsSpecifications• Dimensions: 14” wide, 15” deep, 30” high • Weight: 100 lbs (without power unit)• Rating: 60 ton force @ 10,000 psi maximum • Full Cycle Time: 20 seconds with electric pump • Reference page C-18 for information on available power unitsKarrykrimp 2Optional Tooling• Die Kit (85C-KDA)Includes 43 Series dies in sizes 1/4”, 3/8”, 1/2”, 3/4”, 1” and 1-1/4” and 70/71 Series dies in sizes 3/8”, 1/2”, 3/4”, 1”, 1-1/4” ONLY.Standard EquipmentCatalog 4410 US EquipmentKarrykrimp 2 Crimp InformationSilverBlackBlackSilverSilverSilverSilver BlackSilverSilverBlack For a new decal, contact Parker at: 1-800-C-PARKER.PHastkrimp/Karrykrimp 2 Hose Die Selection ChartCapabilityFeaturesCRIMPSOURCEDescriptionThe industry's most complete resource for crimper techni -cal information. It contains all of the crimp specifications approved for Parker's rubber, industrial and thermoplastic hose:• Crimp specs • P DFs of technical manuals for easy downloading • P arts lists • T roubleshooting advice • P DFs of crimper decalsCrimpsource provides easy access to all the specifications necessary to correctly fabricate a factory quality hose assembly.A series of dropdown menus enables users to find what they need quickly and easily.Choose your crimper, and then select the hose, fittings and current specifications needed to make hose assemblies.You can also print a simple-to-follow data specification sheet or crimper decal.Crimpsource Home PageCrimpsource Spec PageColor-CodedTurn on the pump by pressing the “ON” switch. Pull the valve handle forward to bring the pusher down for crimping. When the split die ring con tacts the base plate, the crimp is complete. Push the valve handle back to lift the pusher, open the dies, and release the finished assembly.Note: You do not have to remove any tooling to insert or remove straight fittings. The front half of the split die ring and the front die train must be removed to insert and remove bent tube fittings.Slide PinIf required, place spac -Lower the back half of the split die ring onto the dies by pulling the slide pin forward.Slide PinFor 81 Series Shells with 88 Series FittingsColor-Coded 6 Crimp hose4Set-up: Position the bonded rubber hose so that it lies flat on a work surface without tendency to twist or turn.Measure hose tear back length: Measure and mark the length that the hoses are to be separated.A minimum of 12 inches is required for crimping the hose ends. A 24 inch tear back is recommended for use with hydraulic tools.A.) Using a sharp blade, pierce the center of the valley (web) formed by the hoses.B.) To start the cut, place the blade in the center of that valley (web) drawing the knife with constantpressure.Stopping Separation: Parker recommendsinstalling a heat shrink sleeve of at least 2 inches in length with the appropriate I.D. (Table 1) at the termination of the separated hose to provide pro-tection against tearing of the valley (web) or hose covers. This heat shrink sleeve should be placed on the hose assembly prior to the crimping of the hose fittings. Once you have your heat shrink sleeve in place, use a heat gun to shrink the sleeve in place.Measure Separation: It is suggested that theseparation length be at least 12 inches, so the crimping operation can be accomplished without risk of kinking the hoses.Crimping Fittings: All of your crimping information can be found on Crimpsource(/crimpsource).(for use with the Minikrimp, Karrykrimp and Karrykrimp 2)Ease of operation hand pump delivers 10,000 psi (for use with the Minikrimp, Karrykrimp and Karrykrimp 2)Heavy duty electric pump delivers 10,000 psi at a faster 115 volt, 1 phase, 50/60 Hz, 20 amp(for use with the Minikrimp, Karrykrimp and Karrykrimp 2)Ideal unit for Parker Mobile Hose Preplacement Service, Air/Hydraulic Pump(for use with the Minikrimp, Karrykrimp and Karrykrimp 2)Lightweight pump operates with 80-150 psi shop air (for use with the Minikrimp, Karrykrimp and Karrykrimp 2)Ease of operation hand pump delivers 10,000 psi (for use with the Minikrimp, Karrykrimp and Karrykrimp 2)Ease of operation hand pump delivers 10,000 psi• For additional information and operating instructions, visit the Parker Hose Products Division website at .• For crimping instructions, see pages C-14 and C-15.• Hose assemblies must be inspected for cleanliness and free of all foreign particles.Hose Cut-Off Machine• Cuts multi-braided wire reinforced hose including 6 spiral • Dimensions: 22” wide x 42” long x 24” high Hose Cut-Off Machine• For quick, easy cutting of spiral reinforced hose up to 1-1/4” I.D.• Moving parts shielded by guards• Dimensions: 13” wide x 26” long x 22” high Hose Cut-Off Machine -• Unique clamp system spreads hose as itconstruction up to 1-1/4” I.D.• Dimensions: 16” wide x 12” long x 19” high Individual Part Number Hose Cut-Off MachinePart No. TH3-50Features• Standard 14” scalloped blade • F ront plate with useable pins easily holds in place for a straight cut • Clear face shieldSpecifications• 4.2 HP/115 volts 20 amp 1PH 50/60 cycle motor (a 20 amp dedicated circuit is recommended)• Dimensions - 22-1/2” wide x 18-1/4” long x 23-1/2” high • Shipping weight - 65 lbs.• Blade size - 14” x 0.125” x 1”Saw Part Number: TH3-50• • •Features• Small in size and easy to use• Quick cutting of textile reinforced hose• Ruggedly built for years of trouble-free service• Shipping Weight: 6 lbs.• Combined hose cutter and toggle action press that cuts and assembles Parker Push-Lok in sizes 1/4” through 3/4” I.D.Specifications• Dimensions: 16” long • Shipping Weight: 4 lbs.Features• Portable tool for efficient cutting of hose• Can be positioned onto a flat surface by clamps or bySpecificationsocking it in a vise, properly align the hose in a radius and cut it with a hacksawHose Insertion Depth Blocks • For quick easy marking of hose insertion depth• Ensures accuracy and increased productivityDescription26 Series -4 through -1026 Series -12 through -32 Fitting Push-On Stand• Quickly and easily pushes fittings onto hose• Eliminates the need of rubber mallets and oils to get fittings • Standard with straight tooling required for sizes 1/4” through for all crimped fittings, 82 Series Push-Lok and 88 Series HozemblerPart No. 432-115VFeatures• Power machine to facilitate the attachment of field• Handles all hose and fittings up to 4 spiral wire, in sizes3/16” through 2” I.D., including bent tube elbows• Comes with vise, all adapters, foot switch and safety guard with 115V, 30 amp, universal AC motorPart No. 80C-0DR and 83C-0DR• Modular die rack designed to hold small and large Parkrimp • Can be bolted together to a work bench horizontally orDA c c e s • High efficiency lubricant used for stainless steel field • Contains Teflon to reduce the wear between metal surfaces, protects against corrosion and ultimately eliminates gallingPart No. Hose Oil• Reduces torque and eliminates waste lubrication • Use hose oil with the recommended hose assembly • Holds up to 30 Parkrimp dies of any size• Powder-coated, heavy-duty steel construction• Consists of a base unit and up to five circular holders • Floor or bench mountedStandard EquipmentDescriptionSwivel Die Rack and Small Die Holder Swivel Die Rack and Large Die HolderEquipment Catalog 4410 USMandrel KitsMandrels - 25 Series(For 271 Transportation Hose)Part No. TH2-7M25-6 and TH2-7M25-8。
PACDN004中文资料
215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 When placing an order please specify desired shipping: Tubes or Tape & Reel.Application Information See also California Micro Devices Application note AP209, Design Considerations for ESD protection.In order to realize the maximum protection against ESD pulses, care must be taken in the PCB layout to minimize parasitic series inductances to the Supply and Ground rails. Refer to Figure 1, which illustrates the case of a positive ESD pulse applied between an input channel and Chassis Ground. The parasitic series inductance back to the power supply is represented by L 1. The voltage V Z on the line being protected is:V Z = Forward voltage drop of D 1 + L 1 x d(I esd )/dt + V Supplywhere I esd is the ESD current pulse, and V Supply is the positive supply voltage.An ESD current pulse can rise from zero to its peak value in a very short time. As an example, a level 4 contact discharge per the IEC 61000-4-2 standard results in a current pulse that rises from zero to 30 Amps in 1nS. Here d(I esd )/dt can be approximated by ∆I esd /∆t, or 30/(1x10-9). So just 10nH of series inductance (L 1) will lead to a 300V increment in V Z !Figure 1©1999 California Micro Devices Corp. All rights reserved.215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 。
PA4系列空气 液压泵产品说明书
MODEL FAIR/HYDRAULIC PUMPLitho in USANUMBERS ON INTAKE BLOCK.ASSEMBLY TO CORRESPONDING CONNECT REMOTE CONTROL HOSE REMOTE CONTROL CONNECTIONS This view is used for these following models:- More models are listed further in this parts list.-Note:The view below may not be an exact representation of your pump due to the variationof pumps listed, but all parts have been accounted for and are in this parts list.PA4-PPC PA4RPA4R-LGC PA4R-PFPA4RM-STACO PA4RN PA4RV PA4R2EPA4R2N PA4R2VY13-REM-PF 52431PA4R-STAND PA4RE PA4RMPA4RM-DE-STA-CO1101644Screw (10-24 X 3/8)241605BK21Shroud32110606Screw (9-15 X 1; For plastic reservoir; Torque to 25/35 in. lbs.) 2159526Screw (10-24 X 5/8; For metal reservoir)53054961T rade Name Decal (For PA4RM-DE-STA-CO, PA4R-STAND &PA4RM-STACO)305496CE1T rade Name Decal (For PA4R, PA4R-LGC, PA4RM, & 52431)6*3054941Instruction Decal (For PA4-PPC, PA4R-PF, PA4R2E, PA4R2N,PA4R2V & Y13-REM-PF)7612431Reservoir (plastic)41300WH21Reservoir (metal)8*338531Reservoir Gasket (For all except PA4R2E, PA4R2N &PA4R2V) *474091Reservoir Gasket (For PA4R2E, PA4R2N &PA4R2V) 9440251Remote Hand Switch Assembly(For PA4R, PA4RM & PA4RM-DE-STA-CO; See form #100426)102082186Straight Fitting (1/8 NPTF; For PA4R, PA4RM,PA4RM-DE-STA-CO & PA4R-STAND)114505212'Three-Strand Hose (For PA4R, PA4RM, PA4RM-DE-STA-CO& PA4R-STAND; Note: Connect hose ass'y to hand control andpump as shown. Color coded or numbered ends must correspondto numbers on the hand control and pump unit.)122517621Warning Decal(For PA4R, PA4R-LGC, PA4RM,PA4RM-DE-STA-CO, PA4R2E, PA4R2N, PA4R2V,52431& PA4R-STAND)251762-CE1Warning Decal (For PA4RM-STACO)PARTS INCLUDED BUT NOT SHOWN2110604Screw (For PA4-PPC, PA4R, PA4R-LGC, 52431 & PA4R-STAND; For Arraypump mounting purposes only.)110841Plug Fitting (1/16 NPTF; For PA4R-PF)Part numbers marked with an asterisk (*) are contained in a repair kit.See back sheet 9 of 10 for individual repair kit information.Parts List Form No. 1017321TOP & END VIEWSThese views are used for these following models:PA4-PPC PA4RPA4R-LGC PA4R-PFPA4R-STAND PA4RE PA4RMPA4RM-DE-STA-COPA4RM-STACO PA4RN PA4RV PA4R2EPA4R2N PA4R2VY13-REM-PF 52431- More models are listed further in this parts list.-Note:The view below may not be an exact representation of your pump due to the variationof pumps listed, but all parts have been accounted for and are in this parts list.1420965BK21Cover Plate (For all except PA4R2E, PA4R2N & PA4R2V) 58706BK21Cover Plate (For PA4R2E, PA4R2N & PA4R2V)2154991Plug Fitting (1/8 PTF; For all except PA4R-PF & 58540) 3144232Screw (10-24 X 2)4*299921Foam Tube514281.3 ft Nylon Tubing (For all except PA4R-PF)6347591Piston Relief Valve Body72516891Filler/Breather Cap8*102731O-ring (.81 X .62; For all except PA4RE, PA4RV, PA4R2E & PA4R2V) 189991O-ring (.81 X .62; For PA4RV & PA4R2V)2501571O-ring (.81 X .62; For PA4RE &PA4R2E)9111271Plug Fitting(3/8 NPTF)132721Plug Fitting(1/4 NPTF; For all except PA4R-PF)10586821Release Valve Body (For all except PA4R-STAND)590151Release Valve Body (For PA4R-STAND)11111516Screw(10-24 X 1-1/4"; Torque to 50/60 in. lbs.)122507252Straight Fitting(1/16 NPTF; For all except PA4R-PF) 13647671Pump Body14174284Screw(1/4-20 X 3-1/2"; Torque to 85/95 in. lbs. oiled;Note:Cross torque in increments of 30 in. lbs.)152057241Attention Decal(For PA4RV & PA4R2V)2503281Attention Decal(For PA4RE & PA4R2E)PARTS INCLUDED BUT NOT SHOWN114342Screw(10-24 X 1/2; For PA4R-PF)2517591Pump Instruction Decal(For PA4R, PA4RM,PA4RM-DE-STA-CO & PA4R-STAND) Array2517601Release Instruction Decal(For PA4R, PA4RM,PA4RM-DE-STA-CO & PA4R-STANDPart numbers marked with an asterisk (*) are contained in a repair kit.See back sheet 9 of 10 for individual repair kit information.Parts List Form No. 101732SIDE AND END VIEWSThese views are model FT20A only:1612431Reservoir2*338531Reservoir Gasket314726-Nylon Tubing (Approx. 11 in.)497961Half Coupler w/Dust Cap5209034 1.5 ft Foam Tape(Note: Apply foam tape between shroud and coverplate.)653092GY81Shroud7144234Screw (10-24 X 2)8106114Roll Pin (.38 X 1.50; Note: Orient slot of spring pin toward inside asshown.)92516891Filler/Breather Cap10*102731O-ring (.81 X .62)112110606Screw (9-15 X 1; Torque to 25/35 in. lbs.)13647671Pump Body14174284Screw (1/4-20 X 3-1/2")15*3054941Instruction Decal (Oil lub.)162147631Power Pak Decal173084231T rade Name Decal183084211T rade Name Decal193084221Instruction DecalPart numbers marked with an asterisk (*) are contained in a repair kit.See back sheet 9 of 10 for individual repair kit information.Parts List Form No. 1017321615TOP VIEWSThese views are for model FT20A only:12133431Coupler Plug22500241Female Quick Half Coupler3154261Straight Fitting (1/4 NPTF)42086991T ee Fitting (1/4 NPTF)52500261Straight Fitting (1/4 NPTF)62500251Coupler Plug7351096BK21Valve Mounting Plate8108073Screw (1/4-20 X 1/2)914726-Nylon Tubing (Approx. 7 in.)1015457290° Elbow Fitting113510861Pressure Actuated Valve1214680290° Elbow Fitting (1/8 NPTF)132082182Straight Fitting (1/8 NPTF)14194631T ee Fitting (1/8 NPTF)152133461Speed Control Muffler16420965BK21Cover Plate17250463290° Elbow Fitting (1/8 NPTF)18154993Plug Fitting (1/8 PTF)19144232Screw (10-24 x 2)20*299921Foam Tube214202931Piston Release Valve Body22586821Release Valve Body23111516Screw (10-24 X 1-1/4")Part numbers marked with an asterisk (*) are contained in a repair kit.See back sheet 9 of 10 for individual repair kit information.Parts List Form No. 10173213END, SIDE & TOP VIEWS For PA4-WHEE only:162007BK21Reservoir22159528Screw (10-24 X 5/8)32516891Filler/Breather Cap4*102731O-ring (.81 X .62)5647671Pump Body6174284Screw (1/4-20 X 3-1/2"; Torque to 85/95 in. lbs. oiled. Note: Crosstorque in increments of 30 in. lbs.)7*476751Reservoir Gasket82516511Cap Fitting (3/8 tube)9116281Straight Fitting (3/8 NPTF)10586851Release Valve Body11154591Exhaust Muffler12*3054941Instruction Decal (Oil lub.)13110481Plug Fitting (1/8 NPTF)14421199BK21Cover Plate15111516Screw (10-24 X 1-1/4"; Torque to 50/60 in. lbs.)164202931Piston Release Valve Body1715457190° Elbow Fitting (1/4 NPTF)18114342Screw (10-24 X 1/2)19110893Washer (.51 X .22)20250463190° Elbow Fitting (1/8 NPTF; Assemble with thread sealant.) 21194631T ee Fitting (1/8 NPTF)222510541Straight Fitting (1/4 NPT)23158832.36 ft Polyethylene Tubing2435019523-Way Control Valve252504643Straight Fitting (1/8 NPTF)262061052Push Button w/Wrench27251652190° Elbow Fitting (1/8 NPTF)282532932Raise & Lower DecalPARTS INCLUDED BUT NOT SHOWN2159512Screws (1/4-20 X 3/4; For pump mounting purposes only.)Part numbers marked with an asterisk (*) are contained in a repair kit.See back sheet 9 of 10 for individual repair kit information.END, SIDE &TOP VIEWS18gasketand coverplate.1118562Screw (10-24 X 1)214726.8 ft Nylon Tubing3*3054941Instruction Decal (Oil lub.)4612431Reservoir (Plastic)5*338531Reservoir Gasket615457190° Elbow Fitting (1/4 NPTF)7101972Hex Nut (10-24)8111082External Tooth Washer (.40 X .20)93503291Air Operated 4-Way Valve102504643Straight Fitting (1/8 NPTF)11420384BK21Shroud12101644Screw (10-24 X 3/8)13106761Straight Fitting (3/8 NPTF)14132721Plug Fitting (1/4 NPTF)152110606Screw (9-15 X 1; Torque to 25/35 in. lbs.)17114342Screw (10-24 X 1/2)18110892Flat Washer (.51 X .22)19420965BK21Cover Plate20111516Screw (10-24 X 1-1/4"; Torque to 50/60 in. lbs.)214202931Piston Release Valve Body22586851Release Valve Body232516891Filler Breather Cap24*102731O-Ring (.81 X .62)25647671Pump Body26174284Screw (1/4-20 X 3-1/2; Torque to 85/95 in. lbs. oiled; Note: Crosstorque in increments of 30 in. lbs.)PARTS INCLUDED BUT NOT SHOWN Array2110604Screw (9-15 X 1; Torque to 25/30 in. lbs.; For pump mountingpurposes only.)Part numbers marked with an asterisk (*) are contained in a repair kit.See back sheet 9 of 10 for individual repair kit information.END, SIDE & TOP VIEWS For PA4RM-CODHE only:# 3# 2# 1ADVANCE #3RETRACT #1REMOTE CONTROL AIR SUPPLYMAIN AIR INTAKE12345678910111213141215161718192021232224252627Part numbers marked with an asterisk (*) are contained in a repair kit.See back sheet 9 of 10 for individual repair kit information.BASIC PUMP ASSEMBLYThis view is for all models in this parts list.Note:The view below may not be an exact representation of your pump due to the variation of pumps listed, but all parts have been accounted for and are in this parts list.1*2517171O-ring (1.0 X .62; For all exceptPA4-WHEE, PA4RE, PA4RV ,PA4R2E, PA4R2V & 58540) 2517181O-ring (1.0 X .62; For PA4RV &PA4R2V)2517191O-ring (1.0 X .62; For PA4RE &PA4R2E)2283871Muffler (For all except PA4-WHEE &58540)3*282391Gasket4523901Piston Body 5*142652Piston Ring6*2518352O-ring (2-1/2" X 2-5/16" X 3/32 Nitrile;For all except PA4RE, PA4RV ,PA4R2E & PA4R2V)2518652O-ring (2.31 X 2.12; For PA4RV &PA4R2V)2518662O-ring (2.31 X 2.12; For PA4RE &PA4R2E)7*102761O-ring (1.0 X .75; For all exceptPA4RE, PA4RV , PA4R2E & PA4R2V)190261O-ring (1.0 X .75; For PA4RV &PA4R2V)2501881O-ring (1.0 X .75; For PA4RE &PA4R2E)8347571Piston Release9*2081441O-ring (1.12 X .87; For all exceptPA4RE, PA4RV , PA4R2E & PA4R2V;Apply lubricant)190281O-ring (1.12 X .87; For PA4RV &PA4R2V; Apply lubricant)193861O-ring (1.12 X .87; For PA4RE &PA4R2E; Apply lubricant)10*102721O-ring (.75 X .56; For all exceptPA4RV , PA4RE, PA4R2E & PA4R2V)189981O-ring (.75 X .56; For PA4RV &PA4R2V)2501941O-ring (.75 X .56; For PA4RE &PA4R2E)11343781Check Valve Body 12*2506381Oil Filter Disc13*110882Internal Retaining Ring (.31 X.010)142110532O-ring (.37 X .25; For all exceptPA4RV , PA4RE, PA4R2V , PA4R2E &58540)114382O-ring (.37 X .25; For PA4RV &PA4R2V)177152O-ring (.37 X .25; For PA4RE &PA4R2E)*125222O-ring (.37 X .25; For 58540)15*118411O-ring (1.62 X 1.37; For all exceptPA4RV , PA4RE, PA4R2V & PA4R2E)190351O-ring (1.62 X 1.37; For PA4RV &PA4R2V)2516951O-ring (1.63 X 1.38; For PA4RE &PA4R2E)16*3510211Cover Plate Gasket17*104421Copper Washer (.37 X .25)18100021Screw (1/4-20 X 3/8; Torque to 90/110in. lbs.)19*104451Spring (.16 O.D. X .72)20*104231Ball (9/32" dia.)21-------Relief Valve (When ordering a replacement relief valve refer to stamped number on the outside of the relief valve. See note below.Apply loctite 592 [Power Team #905516] or equiv. & torque to 150/170 in. lbs.)22452781Piston Cylinder (Torque to 90/100 ft.lbs. oiled)23*103751Ball (1/4"; For all except PA4R2E,PA4R2N, PA4R2V &PA4RM-CODHE)*104231Ball (9/32" dia. For PA4R2E, PA4R2N,PA4R2V & PA4RM-CODHE)24*102611Washer (.75 X .60)253088931Filter Adapter (For all except PA4-WHEE, PA4R2E, PA4R2N,PA4R2V & PA4RM-CODHE; See back sheet 9 of 10 for pumps with 2gal. reservoirs; Torque to 40/50 ft.lbs. oiled)3083661Filter Adapter (For PA4-WHEE;T orque 40/50 ft. lbs. oiled)262145781Filter (For all reservoir sizes except 2gal. reservoirs built after June 1, 1998)272145861Internal Retaining Ring (For all reservoir sizes except 2 gal. reservoirs built after June 1, 1998; .63 X .015)28*102631Special Washer 29*139341U-Cup & Backup30*3042951Retainer (Note: See “INSTRUCTIONSFOR RET AINER REPLACEMENT”on sheet 10 of 10.)31*174292Backup Washer (2.94 X 2.75)32*139381Spring (1.45 O.D. X 4.4)33282261Piston (1/4")342031431Bumper352109941Spring GuideNOTE:Standard relief valves are set at 10,100/10,700 PSI.Relief valves pre-set at special settings are available.Refer to your pump model number or contact Power Team Technical Services.Part numbers marked with an asterisk (*) are contained in a repair kit.See back sheet 9 of 10 for individual repair kit information.-CONTINUED-38*2110521O-ring (.90 X .70; For all exceptPA4RE, PA4RV , PA4R2E & PA4R2V)2501921O-ring (.90 X .70; For PA4RV &PA4R2V)2501931O-ring (.90 X .70; For PA4RE &PA4R2E)393054751Exhaust Valve Stem 40*102413Lockwasher (.33 X .20)412110543Screw (10-24 X 1/2; Torque to 50/55in. lbs.)42338221Piston End Plate Casting 43*281831Piston Poppet PA4-WHEE & 58540)374681Rear Head (For PA4-WHEE &58540)47*2162961Filter (For all except PA4R-PF)48132721Plug Fitting (1/4NPT; For all except FT20A, PA4R-PF & PA4-WHEE &58540)149721Plug Fitting (1/4 PTF; For FT20A)49416011Manifold (For all except PA4-WHEE,PA4R-PF & 58540)PARTS INCLUDED BUT NOT SHOWN 2504611Air Pump Muffler (For 58540)ASS’Y.SEAT AT 123456789101282271Release Valve Button2*102661O-ring (.37 X .25; For all except PA4RE,PA4RV , PA4R2E, PA4R2V & 58540)114381O-ring (.37 X .25; For PA4RV & PA4R2V)177151O-ring (.37 X .25; For PA4RE & PA4R2E )125221O-ring (.37 X .25; For 58540)3*139441Spring (.36 O.D. X .50)4343771Poppet Retainer5*152791O-ring (.50 X .37; For all exceptPA4-WHEE, PA4RE, PA4RV , PA4R2E,PA4R2V & 58540)197751O-ring (.50 X .37; For PA4RV & PA4R2V)177161O-ring (.50 X .37; For PA4RE & PA4R2E)*139431O-ring (.50 X .37; For PA4-WHEE &58540)6290371Release Valve Poppet 7*144431Ball (3/32")82097361Ball Retainer9*139591Spring (.12 O.D. X .50)10139371Dowel Pin (.06 X .63; Note: Placetapered end toward ball.)DETAIL "A"This view is for all models in this parts list.Part numbers marked with an asterisk (*) are contained in a repair kit.See back sheet 9 of 10 for individual repair kit information.REPAIR KITSNo.300843PA4-WHEENo.30085558540No.300854FT20A PA4-PPC PA4R-PF Y13-REM-PF1*104231Ball (9/32 Dia.)2*102611Special Washer (3/4 x 19/32 x 1/32)3480071Filter Adapter (Torque to 40/50 ft.lbs. oiled.; For PA4R2E, PA4R2N &PA4R2V)42145781Filter52145861Retaining Ring (.63 x .015)1For 2 Gallon Reservoirs OnlyPart numbers marked with an asterisk (*) are contained in a Repair Kit. See below forindividual repair kit information.14220161Filter Adapter 2296821Filter2FILTER ADAPTER ASSEMBLY AFTER 6/1/98For 2 Gallon Reservoirs Only (Reference Part Number 48007)Retainer。
Parker Hannifin 公司 C Series 两阶段四路喷嘴式服务阀说明书
General DescriptionSeries SE05, SE10 and SE15 are two stage, 4-way, flapper and nozzle style servovalves. These valves have high performance spool and sleeve designs. A special jewel feedback design enhances durability and prevents ball glitch problems, which can occur in other types of servovalves. These valves are rated for 315 Bar (4500 PSI) service.FeaturesSpecifications30101515Flow vs. Pressure Dropat 100% commandFlow Path: P →C1→C2→Rgo to .• Lapped spool and sleeve • Jewel feedback ball fordurability • Aluminum body• Medium and Highperformance• SE05 15.88 mm(0.625 in.) port circle • SE10 19.81 mm(0.780 in.) port circle • SE15 23.80 mm (0.937 in.) port circleSeries Wiring Seal SpecialOptionsFactory Code forSpecial OptionsFlowsWeight: 1.0 kg (2.2 lbs.)Cable with mating connector: EHC154SMating connector: MS3106E-14S-2SElectronics: BD101, 23-5030, 23-7030, PMC10, BD90, or BD95SE05Bolt kit: 4 of M5 x 60 mm, or 4 of #10-32x2.25"Flushing valve: 11-0500Metric Subplate: DS02SPS8M (M18x1.5 ISO 6149 side ports)SAE Subplate: DS02SPS8S (#8 SAE side ports)SE10Bolt kit: 4 of M5 x 60 mm, or 4 of #10-32x2.25"Flushing valve: 11-0500Metric Subplate: DS71SPS8M (M18x1.5 ISO 6149 side ports)SAE Subplate: DS71SPS8S (#8 SAE side ports)SE15Bolt kit: 4 of M6 x 60 mm, or 4 of 1/4-20x2.25"Flushing valve: 11-0500Metric Subplate: DS72SPS8M (M18x1.5 ISO 6149 side ports)SAE Subplate: DS72SPS8S (#8 SAE side ports)PilotSourceInternalMaterialAluminumCoils OperatingPressure209 Bar(3032 PSI)VersionAA ACode Connector over Flow P to C2 with:B Port C2 (+) signal to A, CA Port C1 (+) signal to A, C1)Only available up to40 LPM (10 GPM)Code DescriptionH High Performance 1)S StandardCode DescriptionSE05 15.8 mm (0.625 in.)SE10 19.8 mm (0.780 in.)SE15 23.8 mm (0.937 in.)Code Description Parallel SeriesA 40 ohms 60 mA 30 mAB 300 ohms 30 mA 15 mAC 800 ohms 30 mA 15 mAD 22 ohms 80 mA 40 mAF 80 ohms 40 mA 20 mAG 22 ohms 200 mA 100 mAH 200 ohms 15 mA 7.5 mAL 1200 ohms 20 mA 10 mAM 27 ohms 100 mA 50 mAT 1000 ohms 10 mA 5 mA2)Consult factory forprice and availabilityof special options.Code Description1 4 LPM (1.0 GPM) SE05 Only2.5 10 LPM (2.5 GPM) SE05 Only5 20 LPM (5.0 GPM) SE10 Only10 40 LPM (10.0 GPM) SE10 Only15 60 LPM (15.0 GPM) SE15 OnlyCode DescriptionOmit StandardS (Specify) 2)Code DescriptionV Fluorocarbon (std.)N NitrileSeries SE05, SE10 and SE15Performance CurvesFrequency Response at 210 Bar (3000 PSI)High ResponseSE05: 4 – 20 LPM (1 – 5 GPM)Standard ResponseSE05: 4 – 20 LPM (1 – 5 GPM)102040601002004005P h a s e l a g (d e g r e e s )A m p l i t u d e r a t i o (dB )P ha s e l a g (d e g r e e s )A m p l i t u d e r a t i o (dB )1020406010020040050Frequency (Hz)102040601002004005P h a s e l a g (d e g r e e s )A m p l i t u d e r a t i o (dB )Frequency (Hz)10-42040601002004005-6-80-2P h a s e l a g (d e g r e e s )A m p l i t u d e r a t i o (dB )Frequency (Hz)1020406010020040050P h a s e l a g (d e g r e e s )A m p l i t u d e r a t i o (dB )High ResponseSE10: 40 LPM (10 GPM)Standard Response SE10: 40 LPM (10 GPM)Standard ResponseSeries SE05, SE10 and SE15Technical InformationInstallation Wiring OptionsThis servovalve has two coils. When connecting the valve to a drive amplifier, the user’s external wiring may put the coils either in parallel or in series as needed. Refer to the illustrations below and to the mounting pattern for this valve to insure proper control phasing.Polarity shown connects flow from P to C2 port.+-+-Performance CurvesStep Response at 210 Bar (3000 PSI)Standard ResponseSE05, SE10 & SE15: 4 – 40 LPM (1 – 10 GPM)100755025Inputsignal[%]time [ms]02468High ResponseSE05, SE10 & SE15: 4 – 40 LPM (1 – 10 GPM) 100755025time [ms]Inputsignal[%]05101520SE05,SE10SE15SE05 use Parker 2011V-9 (7.66 mm I/D x 1.78 section)SE10 use Parker 2012V-9 (9.25 mm I/D x 1.78 section)SE15 use Parker 2013V-9 (10.82 mm I/D x 1.78 section)4. Null adjust requires 10 A/F ring spanner (10 mm boxend wrench) and 2.5 hexagon key. Flow out of C1 willincrease with clockwise rotation of key.5. See mounting dimensions for port size and locations. SE05SE10SE15Inch equivalents for millimeter dimensions are shown in (**)SE05 Mounting Surface1. The recommended full-thread depth is 16 mm (0.630 in.).2. The minimum depth of hole G is 4 mm (0.157 in.).3. Surface roughness Ra < 0.8 µm [N6], as specified inISO 468 and ISO 1302.4. Surface flatness: 0.025 mm (0.001) as specified inISO 1101.SE10 Mounting Surface1. The recommended full-thread depth is 16 mm (0.630 in.).2. The minimum depth of hole G is 4 mm (0.157 in.).3. Surface roughness Ra < 0.8 µm [N6], as specifiedin ISO 468 and ISO 1302.4. Surface flatness: 0.025 mm (0.001) as specified inISO 1101.SE15 Mounting Surface1. The recommended full-thread depth is 18 mm (0.709 in.).2. The minimum depth of hole G is 4 mm (0.157 in.).3. Surface roughness Ra < 0.8 µm [N6], as specified inISO 468 and ISO 1302.4. Surface flatness: 0.025 mm (0.001 in.) as specified inISO 1101.15.88 (0.625) port circle19.81 (0.780) port circle23.80 (0.937) port circleMetric Dimensions (mm) (± 0.1 mm)P C1 R C2 G F1 F2 F3 F4Axis Ø 8 max Ø 8 max Ø 8 max Ø 8 max Ø 3.5 M6 M6 M6 M6 x 21.4 9.5 21.4 33.3 11.5 0 42.8 42.8 0y5.117.129.017.14.434.234.2Metric Dimensions (mm) (± 0.1 mm)P C1 R C2 G F1 F2 F3 F4Axis Ø 5 max Ø 5 max Ø 5 max Ø 5 maxØ 3.5 M5 M5 M5 M5 x 21.4 13.5 21.4 29.3 11.5 0 42.8 42.8 0y9.217.125.017.14.40 034.234.2Metric Dimensions (mm)(± 0.1 mm)P C1 R C2 G F1 F2 F3 F4Axis Ø 7.5 max Ø 7.5 max Ø 7.5 max Ø 7.5 max Ø 3.5 M5 M5 M5 M5 x 21.4 11.5 21.4 31.3 11.5 0 42.8 42.8 0 y7.217.127.017.14.434.234.2U.S. Dimensions (inches)(± 0.004 in.)P C1 R C2 G F1 F2 F3 F4Axis Ø 0.195 max Ø 0.195 max Ø 0.195 max Ø 0.195 max Ø 0.136 # 10 -32 # 10 -32 # 10 -32 # 10 -32 x 0.843 0.531 0.843 1.153 0.453 0 1.685 1.685 0 y0.362 0.673 0.984 0.673 0.1730 1.347 1.347U.S. Dimensions (inches) (± 0.004 in.)P C1 R C2 G F1 F2 F3 F4Axis Ø 0.312 max Ø 0.312 max Ø 0.312 max Ø 0.312 max Ø 0.14 1/4 - 20 1/4 - 20 1/4 - 20 1/4 - 20 x 0.843 0.374 0.843 1.311 0.453 0 1.685 1.685 0 y0.201 0.673 1.142 0.673 0.1730 1.347 1.347U.S. Dimensions (inches) (± 0.004 in.)P C1 R C2 G F1 F2 F3 F4Axis Ø 0.290 max Ø 0.290 max Ø 0.290 max Ø 0.195 max Ø 0.14 # 10 - 32 # 10 - 32 # 10 - 32 # 10 - 32 x 0.843 0.453 0.843 1.232 0.453 0 1.685 1.685 0 y0.283 0.673 1.063 0.673 0.1730 1.347 1.347SE05SE10SE15。
Shimadzu GC-2014C184-E014F 产品说明书.pdf_1718759513.25
GC-2014Big Performance & Small Space GC-2014Improved design and innovative technology for all of our injectors, detectors and fl ow controllers equal or surpass our GC-2010 the high-end technology leader.High PerformanceSuperior PerformanceLarge LCD, all digital gases control and auto-diagnostics inherited from the GC-2010 – “The Most advanced, easy-to-use interface”Easy OperationExcellent User InterfaceUse any column types for any analysis. Packed or capillary columns give you the freedom to choose the best technique for your measurement. Fully integrated multiple valve systems are made simple for optimum performance for SystemGC custom GC products.FlexibilityExpandability for Every SituationSimple nozzle replacement supports both capillary and packed columns.Our New FPD is used for all columnsDetectorsHolophotal Flame Photometric DetectorPhotomultiplierFilter Lens Nozzle The detectors have been completely redesigned, incorporating the GC-2010 detector designs for capillary analyses and the GC-14 detector designs for packed columns. This TCD-2014 unit is ideal for packed column measurements employing the semi-diffusion cell designInjection unitswith unsurpassed accuracyThe design of the SPL-2014 capillary column sample injection unit is based on the GC-2010 technology.This accuracy was unattainable with previous models.The packed column sample injection unit employs the proven design of the GC-14 injection unit.Easier to understand, simpler operationLarge display, help functions and pop-up screens Loaded with productivity-enhancing functionsEasy OperationA large LCD displays chromatograms and method parameters.This is a great improvement for Chromatopacs systems that do not have these real time displays.Graphical user interface enables quick setting of all analytical conditions.The built-in Help function almost eliminates need for familiarization training.Large displayshows most analysis details at a glance,ideal for Chromatopac users.Graphical popup screen that clearly indicates thepolarity so manual injection errors are prevented when using the dual packed column system.Polarity display prevents injection errorsEasy-to-understand Pop-up ScreensChromatogram display Graphical U/IBuilt-in Help FunctionLarge Display6Self-diagnosticsUnit control check Hardware diagnosis Save and check diagnosis logGC-2014250mmGC-14230mmSolenoid valve unitManual fl ow controllersAFCSpeci fi cationsDetectorsTemperature range Temperature settingNo. of units installed simultaneously Detector type 400°C max. (FID, TCD, FTD) 350°C max. (ECD, FPD) 1°C stepsUp to 4 units (restricted depending on detector type) FID, TCD, ECD, FPD, FTD for capillary/packedDual fl ow rate differential system400°C max.3pgC/s (dodecane)107Quartz glass Standard: for packed, Option: for capillaryFlame Ionization Detector (FID) SystemTemperature rangeMinimum detected quantityDynamic rangeNozzleThermal Conductivity Detector (TCD)System Temperature range Dynamic range Sensitivity Dual fl ow rate differential system400°C max.10540,000mV · mL/mg (built-in pre-ampli fi er, with 10 × ampli fi cation)Electron Capture Detector (ECD)SystemTemperature range Minimum detected quantity Dynamic range Fixed current system using 63Ni370MBq radiation source 400°C max.0.1pg/s (γ-BHC)104Flame Photometric Detector (FPD)Temperature range Dynamic rangeMinimum detected quantity 350°C max.P: 104S: 103P: 0.5pgP/s (tributyl phosphate) S: 8pgS/s (dodecane thiol)Flame Thermionic Detector (FTD)Temperature range Dynamic rangeMinimum detected quantity (Two types, one for capillary and one for packed. The speci fi cation are the same.) 400°C max.N: 103P: 103N: 0.4pgN/s (azobenzene)P: 0.05pgP/s (malathion)Display240 × 320 dot graphics display (30 characters × 16 lines)Dimensions, Weight, Power Requirements (GC main unit)Dimensions WeightPower Requirements 400 (W) × 690 (H) × 607 (D) mm48kg (GC-2014AF model)AC100V/120V 230V1800VA (GC-2014AF model) or2600VA (GC-2014AF model), 50/60HzColumn OvenTemperature range DimensionsOven capacity Temperature accuracy Temperature deviation Temperature variation coef fi cient Temperature program steps Programmed rate setting range Total time for all steps Linear heating rangeCooling rateColumns accepted (Ambient + 10°C) ~ 400°C (using liquid CO2 gas*: -50°C ~400°C)250 (W) × 360 (H) × 175 (D) mm15.8LSet value (K) ± 1% (calibration at 0.01°C increments)2°C max. (on 200mm dia. circumference 30mm from rear)0.01°C/°CUp to 20 (cooling program possible)-250°C ~ 250°C/min9999.99 minutes max.30°C/min up to 150°C20°C/min up to 250°C10°C/min up to 380°C7°C/min up to 400°C (at 25°C ambient temperature)300°C ~ 50°C in 6 min max. (at 25°C ambient temperature)Capillary columns: 2Packed columns for GC14B: 4 (Glass columns: 2)Sample Injection UnitTemperature rangeHeating settingsNo. of units installed simultaneously Sample injection unit types Up to 400°C1°C stepsUp to 3 unitsDual packed, single packed, split/splitless, direct, direct (AMC)Carrier Gas Flow Controller For Packed / DualFlow rate setting range Programmable steps Programmed rate setting range Correction function 0 ~ 100mL/min7-400 ~ 400mL/minMaintains column fl ow rate during column oven heatingFor Capillary Split/Splitless, Direct (Split/splitless injection mode)Pressure setting range Programmable steps Programmed rate setting range Split ratio setting rangeTotal fl ow rate setting range Correction function 0 ~ 970kPa7 (pressure-decreasing program possible)-400 ~ 400kPa/min0 ~ 9999.90 ~ 1200mL/minMaintains column average linear velocity during column oven heating (for capillary only)(Pressure mode direct injection)Pressure setting range Programmable steps Programmed rate setting range Correction function 0 ~ 970kPa/min7-400 ~ 400kPa/minMaintains column average linear velocity during column oven heating (for capillary only)(Flow-rate mode direct injection)Flow rate setting range Programmable steps Programmed rate setting range 0 ~ 1200mL/min 7-400 ~ 400mL/minFor Single Packed, Direct (AMC)Flow rate setting range Correction function 0~100mL/minMaintenance column fl ow rate during column oven heating*Optional parts are required to use liquid CO2 gas.。
船舶设备名称和缩写
Name Plate and AbbreviationsITEM NO. 编号 STANDARD NO. OR DRAWING NO.标准号或图号 NAME 名称 DN 通径PN 压力 MATERIAL 材料NAME PLATE STD. NO. 铭牌标准 WORDS ON NAME PLATE 铭牌刻字内容 REMARKS 备注 BLIND FLANGE 盲板法兰LEVEL INDICATOR (PLANK TYPE)板式液位计 BELL MOUTH 吸口（喇叭口/钟形口） STOP VALVE 截止阀 SELFCLOSING VALVE, SPRING LOADED自闭式放泄阀 SAFETY VALVE 安全阀 STOP CHECK VALVE 截止止回阀QUICK CLOSING VALVE,PNEUMATICALLY OPERATED 气动快关阀 DIAGRAM OF FO TRANSFER SYSTEM 燃油输送系统DIAGRAM OF FO PURIFYING SYSTEM 燃油净化系统DIAGRAM OF FO DRAIN SYSTEM 燃油泄放系统SANDWICH NONRETURN FLAP 板式止回阀DIAGRAM OF LO TRANSFER SYSTEM 滑油输送系统DIAGRAM OF L.O.PURIFYING SYSTEM 滑油净化系统NO. 序号 NOM.DIA. 通径 mmO.D.& THK. 外径 x 壁厚㎜ x ㎜ ABOUT LENGTH 近似长度WEIGHT 重量 CLASSⅡ Ⅱ级管SEAMLESS STEEL 无缝钢管 SEAMLESS COPPER 无缝铜管SLUDGE PIPE OF PURIFYING 分油机排渣管 DRAIN PIPE OF PURIFYING 分油机排水管LO DIRTY PIPE 滑油污油管 LO CLEAN PIPE 滑油净油管PRESS. G.CONN.PIPE 压力表接管 LO SERVICE SYSTEM 滑油日用系统QTY. 数量 WT. 重量NAME PLATE STD.NO. 铭牌标准MANOVACUUMMETER AND VALVE 压力真空表和阀L.O.DRAIN SYSTEM 滑油泄放系统 FRESH WATER COOLING SYSTEM 淡水冷却系统 BALL COCK 浮球阀 BUTTERFLY VALVE 手动蝶阀 COMPRESSED AIR SYSTEM 压缩空气系统HOSE VALVE 软管接头阀E/R OIL TANK QUICKCLOSING VALVE CONTROL SYSTEM 机舱油舱柜快关阀控制系统 APPLICATION OF PIPES 管子用途NOM.DIA. 通径 TYPE 牌号QUICKCLOSING VALVE CONTROL PIPES 快关阀控制管DRAIN PIPE 泄放管 E/R STEAM SYSTEM DIAGRAM 蒸汽系统0.68Mpa STEAM PIPE0.68Mpa 蒸汽管 BOILER FEED WATER PIPE 锅炉给水管 BOILER BLOWDOWN PIPE 锅炉排污管/放水管 0.68Mpa CONDENSATE PIPE 0.68Mpa 凝水管 OVERFLOW PIPE 溢流管 AIR PIPE 透气管DRAIN PIPE 放泄管 REMOTE THERMOMETER温度计DIAGRAM OF TANKS STEAM HEATING SYSTEM 舱柜加热系统原理图BLANK FLANGE 盲板法兰 BILGE WATER PIPE 舱底水管BALLAST WATER PIPE 压载水管 FIRE WATER PIPE 消防水管DIAGRAM OF WHOLE SHIP BILGE & BALLAST SYSTEM 全船舱底、压载管系原理图BUTTERFLY VALVE HYDRAULIC ACTUATOR 液压遥控蝶阀DISCHARGECHECK VALVE 吸入止回阀DISCHARGE VALVE OF SELF CLOSED 自闭式放泄阀CAST IRON 铸铁 CAST STEEL 铸钢OILY WATER SEPARATOR SYSTEM 舱底水油水分离器系统BILGEWATER CLARIFIER 舱底水油水分离器S.W.PIPE 海水管 BILGE PIPE 舱底水管DRAIN PIPE 处理水排出管 WASTE OIL PIPE 废油管F.W.PIPE 淡水管 STEAM/CONDEN.PIPE 蒸汽/凝水管 DIAGRAM OF E/R AIR, SOUNDING& TRANSFUSE SYSTEM 机舱空气、测深、注入管系图AIR PIPE (WEATHER DECK) 空气管(露天甲板)SOUNDING PIPE 测深管 DRAIN PIPE 泄放管SHIP’S AIR SOUNDING AND FILLING 全船空气、测深、注入管系图VENT.HEAD 空气管头 INJECT HEAD 注入接头 SOUNDING HEAD 测深头ONE SIDE WELDED BED PLATE FOR FLANGES 法兰焊接单面座板THE HEAD LOSS IN PIPE FROM PUMP TO THE HYDRANT OF THE HIGHEST POSITION至最高位置处消火栓，管路水力损失SEGMENT OF PIPE 管路编号 LENGTH OF PIPE 直管段长 L(m)I.DIA. 管子内径 di (m) FLOWRATE 管中水流量 Q (m3/h) MODULUS 局部阻力系数 NAME OF RESISTANCE 局部阻力名称NU. 个数 n SING. 单个ξFLOW VEL. 管中水流速 v (m/s) RENAULT 雷诺数 Re RESISTANCE TRAIT VALUE 阻力特性值 N COEFFICENT OF FRICTION 流体摩擦系数λ(Re>N) EQUIVALENT PIPE 管子当量长度 ld (m) CALCULATING LENGTH 管子折算长度 lc (m) HEAD LOSS IN PIPE 管段压力损失 h (MPa)THE HEAD LOSS IN PIPE FROM PUMP TO THE HYDRANT ON THE UPPER DECK FORSIDE 至上 甲板首部消火栓处，管路水力损失 H3DIAGRAM OF FIRE FIGHTING SYSTEM 全船消防水管系图ASSEMBLY 组合件ISOLATING VALVE BETWEEN FIRE MAIN AND E/RHAWSEHOLE(P) FLUSHHAWSEHOLE(S) FLUSHFROM EMERGENCY FIRE PUMPTO CARGO HOLD EJECTORVENT BRONZE 青铜DIAGRAM OF E/R WATER SUPPLY SYSTEM 机舱供水管系原理图SCREW DOWN VALVE 截止阀 SCREW DOWN STOP AND CHECK VALVE 截止止回阀 ARRANGEMENT OF WHOLE SHIP WATER SUPPLY SYSTEM 全船供水管系布置图 FLUSH VALVE 冲洗阀 STRAIGHT CONNECT VALVE 直通阀BASIN MIX VALVE 面盆混合放水阀DIAGRAM OF SEWAGE WATER TREATMENT SYSTEM 生活污水处理装置管系原理图GATE VALVE 闸阀 STOP& CHECK VALVE 截止止回阀STOP VALVE 截止阀 CHECK VALVE 止回阀STORM VALVE 可闭立式防浪阀 TO SEWAGE DISCH.MP.(P)SOIL TO SEWAGE TR.UNITCLINIC SOIL TO SEWAGE TR.UNITSANI.TO SEWAGE TR.UNITF.W.FLUSHING TO SEWAGE TR. UNITSEWAGE TO SEWAGE STORAGE TK. 生活污水至生活污水存放舱SEWAGE DISCH.OVERSIDECUTTING PUMP INCUTTING PUMP OUTSEWAGE TR. UNIT OUTDRAINAGE DISCH.TO SEWAGE STORAGE TK.DRAINAGE DISCH.TO MPDRAINAGE DISCH.OVERSIDEDISCH.OVERSIDEDIAGRAM OF DECK SCUPPERS 甲板疏排水管系图DECK SCUPPER PIPE 甲板疏排水管GALV. 镀锌ARRANGEMENT OF SEWAGE WATER SYSTEM (GREY WATER) 卫生水疏排水管系布置图（灰水） ARRANGEMENT OF SEWAGE WATER SYSTEM (BLACK)粪便污水管系布置图（黑水）MARINE AIR PIPE HEAD 船用空气管头 WITH FIREPROOF NET 带防火网 MECHNICAL VENTILATION LAYOUT 舱室机械通风布置图EXHAUST NOZZLE 圆形抽风头 FIRE DAMPER 船用防火风闸 VENTILATOR COAMINGWC EXHAUST FAN 裕厕所抽风机 MUSHROOM VENTILATORS 菌形风帽 HOSPITAL EXHAUST FAN 医务室抽风机VENT LOUVER WITH WEATHERTIGH COVER 风雨密钢质百叶EXHAUST NOZZLE 圆形抽风头 GOOSENECK VENTILATORS 鹅颈式通风筒 MESS & MEETING EXHAUST FAN 餐厅兼会议室抽风机LAUNDRY AND CHANGING EXHAUST FAN 西意见、更衣室抽风机GELLY SUPPLY FAN 厨房送风风机 GELLY EXHAUST FAN 厨房抽风风机WIRE GRILLING 通风栅 VENTILATOR COAMING 甲板接管GALLEY PROVISION AND PROVISION STORE EXHAUST FAN 粮库，厨房，储物间抽风机FIRE DAMPER 船用防火风闸 MUSHROOM VENTILATORS 菌形风帽LAYOUT OF REF.MACHINE RM.VENTILATION 制冷机室通风管系布置图REF.MACHINE EXHAUST FAN 制冷机室抽风机VENTILATOR COAMING 甲板接管 WIRE GRILLING 通风栅 GOOSENECK VENTILATORS 鹅颈式通风筒 STAINLESS STEEL 不锈钢TOTAL 总重 REF.PROV.PLANT SYSTEM 伙食冷库管系原理图 PRESSURE GAUGE VALVE 压力表阀 METALSHELL THERMOMETER金属壳水银温度计 NO.1 CONDENSER C.S.W.INLET NO.2 CONDENSER C.S.W.OUTLETLAYOUT OF DECK COMPRESSED AIR PIPING 甲板压缩空气管系布置图HOSE JOINT VALVE 软管接头阀 REDUCING VALVE 减压阀SCREW DOWN VALVE 截止阀 SCREW DOWN VALVE 旋压阀/螺旋阀MALE SCREW 外螺纹 EMER.GEN.ROOM 应急发电机室A/C ROOM POOP DECK (P) 尾楼甲板（左） POOP DECK (S) 尾楼甲板（右） CREW DECK (P) 船员甲板（左） BOAT DECK (S) 救生艇甲板（右） CAPTAIN DECK 船长甲板 NAVIGATION DECK 驾驶甲板 UPPER DECK（P） 上甲板(左) FORECASTLE DECK(P)首楼甲板（左） STORE 储物间 EMER.FIRE PUMP ROOM 应急消防泵室 INLET OF REDUCING VALVE 减压阀入口 TO AIR HORN 至汽笛 DRAINBYPASS VALVE 旁通阀 OUTLET OF RECUDING VALVE 减压阀出口 FLANGE ACCORDING TO ISO 法兰按照 ISOSETTING 0.22MPa 设定值 0.22MPaOXYGEN&ACETYLENE PIPING DIAGRAM 氧气/乙炔管系图OXYGEN BOTTEN 氧气瓶组 ACETYLENE CYLINDER 乙炔瓶组 OXYGEN REDUCING VALVE 氧气减压阀ACETYLENE BACKFIRE VALVE 乙炔回火阀ACETYLENE REDUCING VALVE 乙炔减压阀2 – LEFT OPENED 2 – 左开 5 – RIGHT OPENED 5 – 右开1 – DOWN OPENED 1 – 下开NATURAL VENTILATION LAYOUT 全船自然通风布置图STRAINER 粗滤器，滤网,过滤器EXPANSION BELLOW 膨胀伸缩式波纹管SLEEVE 套管 伸缩的 TELESCOPIC/RETRACTILE EXTENSION LADDER 伸缩梯Buffer 缓冲器Adjust valve 调节阀OIL AND AIR SEPARATOR OF BOILERFO PUMP OF BOILERFO PUMP OF BOILERFO BOOSTER MODULESTEAM TRACE INLET DN10PIPING SYMBOL: 管子符号MGO PIPE: 燃料油管 轻柴油管：STEAM TRACE PIPE: 蒸汽伴行管：MGO SERVICE TK 轻柴油日用舱HFO SERVICE TK 燃料油日用舱NO.2AUX.ENGINE GEN.SETNO.2 柴油发电机组FR.RETURN OIL OF SPRAY喷油回油NO.1AUX.ENGINE GEN.SETNO.1 柴油发电机组HFO OF BOILER 锅炉燃料油日用柜MDO TK OF BOILER 锅炉点火轻柴油柜FO BOOSTER MODULE 燃油供油单元粗滤器 FILTER燃油供给泵 FO SUPPLY PUMP调压阀 REGULATING PRESS.VALVE手动逆洗滤器 HAND BACK FLUSH FILTER精滤器 FINE FILTER流量计 FO FLOW METER空气分离器 AIR SEPARATOR燃油循环泵 FO CIRCULATING PUMP燃油加热器 FO HEATER自动排气浮阀 AUTO.DEGAS VALVE控制屏 CONTROL PANEL均质机 OMEGAFIRE三通切换阀 THREE WAY VALVE粘度传感器 VSICOSITY SENSOR蒸汽控制阀 STEAM CONTROL VALVEHAND QUICKCLOSING VALVE 手动快关阀FO AND EXCUSED BOILER 燃油废气组合锅炉DIAGRAM OF FO SERVICE SYSTEM 燃油日用系统供油单元柴油进口 FO INLET OF FO BOOSTER MODULE供油单元燃料油进口 HFO INLET OF FO BOOSTER MODULE供油单元加热蒸汽进口 STEAM INLET OF FO BOOSTER MODULE供油单元加热蒸汽冷凝水出口 COAGULATE WATER OUTLET OF FO BOOSTER MODULE供油单元精滤器残油泄放口LEAKAGE OIL OUTLET OF THIN STRAINER OF FO BOOSTER MODULE供油单元燃油出口 FO OUTLET OF FO BOOSTER MODULE供油单元燃油回油接口 RETURN OIL OUTLET OF FO BOOSTER MODULE供油单元泄放口 1 No.1 LEAKGE OIL OUTLET OF FO BOOSTER MODULE供油单元泄放口 2 No.2 LEAKGE OIL OUTLET OF FO BOOSTER MODULE供油单元回油筒放气口 AIR OUTLET OF MIXING TANK OF FO BOOSTER MODULE TECHNICAL REQUIREMENTS1.ANNOTATED SIZES OF PIPE IN THE DRAWING ARE OUT DIA.xTHICK(mm).2. HERE PIPES PENETRATE THROUGH WATER TIGHT BULKHEADS OR DECK TO BE FITTED WITH PENETRATION PIECE ACCORDING TO CB/T348092.3.ALL PIPING TO BE SECURELY SUPPORTED AND BRACED IN ACCORDING WITH CB/T3780 1997 OR SHIPYARD STANDARD.4.THE ITEMS WITH `` * '' OR `` ''TO BE SUPPLIED WITH EQUIPMENT.5.HYDROSTATIC TEST:DESIGN PRESS. MPaBEFORE INSTALLATION MPaAFTER INSTALLATION MPaHFO PIPE 燃料油管MGO PIPE 轻柴油管6. THE MARK Item mark/Item No. REFER TO LIST OF AUTOMATIC CONTROL、MONITORING &ALARM POINTS FOR E/R(44001MX).7.THE H.F.O.PIPING MUST BE PROVIDED WITH DN10(∅ 15X1.5)STEAM TRACINGPIPE AND TO BE COVERED WITH GLASS WOOL OR OTHER EQUIVALENT.技术要求1. 图中管子所注尺寸均为外径 x 壁厚(mm)。
Parker SAE J2044 快连接泵机引擎油气焊接系统说明书
Parker offers a system of quick connect couplings, hose and clamps for making durable, flexibleand lightweight hose assemblies to handle virtually every engine-related requirement, including fuel supply, vapor emission and cooling/heating. Using components from Parker Industrial Hose Products (IHP) and Fluid System Connectors (FSC) divisions, users can easily fabricate these assemblies in a variety of constructions and configurations. Simply cut the hose to length, push the specified fitting into the hose and apply the specified clamp. T o install the finished assembly, push the fitting onto the port and engage the lock with a distinctive “click” that secures the connection.A Hose Assembly System as Easy as Cut, Pinch, Push, ClickSafe Lock™ ConnectorsThe Safe Lock push-to-connect design reduces hose assembly fabrication time and the exclusive locking mechanismminimizes leaks and installation failures.Construction:L ightweight, durable, high temperaturecomposite body with additional retaining lock.Conductive (except 5/8" size)Seal Materials (one each): Fluorocarbon and FluorosiliconePressureR ange: -7.2 psi to +72 psi (-0.50 bar to +5.0 bar) Temperature Range:-40°F to +239°F (-40°C to +115°C) Media:Coolant, fuelIndustry Standard:SAE J2044* F SC is the Parker Fluid System Connectors Division. See back cover for contact information. ** Safe Lock Connector part numbers contain spaces. See Hose and Assembly Component Compatibilitytables on next pageHose and Assembly Component CompatibilitySeries 389 Super-Flex® FL-7 Barrier Fuel Line Hose† S afe Lock fittings in the 5/8" size are NOT conductive. The user must determine if the 5/8" fitting is suitable for fuel applications.†† Not available in Safe Lock design; available only in single lock.Series 395 Fuel Line/Vapor Emission Hose†† Not available in Safe Lock design; available only in single lock.Series 7181 Coolant/Heater Hose† S afe Lock fittings in the 5/8" size are NOT conductive.†† Not available in Safe Lock design; available only in single lock.* IHP is the Parker Industrial Hose Products Division. FSC is the Parker Fluid System Connectors Division. See back cover for contact information. ** Safe Lock Connector part numbers contain spaces.Fuel, Vapor and Coolant/Heater HoseSUPER-FLEX ® FL-7 Barrier Fuel Line HoseCARB/SORE; EPA; SAE J30R7/30R14T2Series 389Tube: Black nitrile and translucent THV barrier R einforcement: Multiple aramid pliesCover: Black CPE, smooth finish Temp. Range: -40°F to + 257 °F (-40°C to +125°C)Brand Method: White ink Brand Example: PARKER SERIES 389 SUPER-FLEX ® FL-7 (ID) SAE J30R7/R14T2 FUEL LINE (x )PKHPLINE389 EPA COMPLIANT 15 g/m 2/day CARB Q-08-013 MAX WP 50 PSI USA (DATE CODE)NOTE: (x ) changes every year Design Factor: 5:1Industry Standards: CARB 2006 SORE, EPA, SAE J30R7, SAE J30R14T2, Applications: • Low pressure fuel lines on blowers, grinders, mowers, off-road engines, pressurewashers, saws• B iodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol, gasoline • A gricultural equipment, autos, buses, construction equipment, off-road equipment Vacuum: 24" Hg (3/16" through 3/8" ID); 10" Hg (1/2" through 3/4" ID)Packaging:ReelsFuel Line/Vapor Emission HoseSAE J30R7Series 395Tube: Black nitrile R einforcement: Multiple textile pliesCover: Black chloroprene; smooth finish Temp. Range: -40°F to +257 °F (-40°C to +125°C)Brand Method: White ink Brand Example: (ID) FUEL/VAPOR LINE SAE J30R7 (DATE CODE)Design Factor: 5:1Industry Standards: SAE J30R7Applications: • Low pressure fuel lines, vapor emission service • B iodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol, gasoline • A gricultural equipment, autos, buses, construction equipment, off-road equipment Vacuum: 24" Hg (3/16" ID through 3/8" ID); 10" Hg (1/2" ID)Packaging:CoilsCoolant/Heater HoseSAE 20R3EC Class D-2Series 7181Tube: Black EPDM R einforcement: Multiple textile pliesCover: Black EPDM; smooth finish Temp. Range: -40°F to +257°F (-40°C to +125°C)Brand Method: White ink Brand Example: PARKER SERIES 7181 HEATER HOSE SAE 20R3EC D-2 (ID)XX PSI MAX WP ELECTROCHEMICALLY RESISTANT MADE IN USA (DATE CODE)Design Factor: 4:1Industry Standards: SAE 20R3EC Class D2Applications: • Coolant, hot water, mild chemicals • Industrial and vehicle coolant systems; low pressure drain lines • Agriculture, construction, general industrial, transportation Vacuum: Not recommended Packaging:Reels, cartonsBrass AdaptersConstruction: Corrosion resistant high temperature brass Configuration: Rigid male pipe Industry Standard: SAE J2044Stepless One-Ear Pinch ClampsPinch ear clamps are constructed of lightweight corrosion resistant stainless steel. The clamps provide uniform surface compression around the circumference of the hose, compensating for varying hosetolerances and thermal expansion. (For best results, install with Oetiker ®Manual Closing Tool #14100082.)* IHP is the Parker Industrial Hose Products Division. FSC is the Parker Fluid System Connectors Division. See back cover for contact information.Installation GuidelinesParker Hose, Safe Lock Fittings and Stepless One-Ear Pinch Clamps1. C ut hose squarely and to length; evacuate all debris from inside the hose.2. Slide clamp onto hose.3. Insert SAE J2044 end fitting.4. P osition clamp over barbs onto J2044 insert as in Figure 1 below.Fully insert fitting into hose until end of hose bottoms out against fitting shoulder. From this position, locate clamp so that 0.25" to 0.31" ofhose is exposed behind clamp (see image below).5. S ecure clamp using Oetiker manual closing tool #14100082 or equivalent(not offered by Parker).Complementary ProductsRefer to Industrial Hose Catalog 4800 for additional products and information.Series 7395 E-Z FORM ™ GS Coolant HoseSAE J20R2-D1 PerformanceTube:Black EPDMReinforcement: Multiple textile braids or plies with wire helix Cover:Black EPDM; Greek corrugated finish Size Range (ID): 1/2" to 4"Pressure Range: 75 psi maximum working pressure T emperature Range:-50°F to +257°F (-45°C to +125°C)Series 7219 E-Z FORM ™ MP Multipurpose Oil Resistant Suction and Return HoseTube:Black nitrileReinforcement: Multiple textile braids or plies with wire helix Cover:Black chloroprene; Greek corrugated finish Size Range (ID): 1/2" to 4"Pressure Range: 75 psi maximum working pressureT emperature Range: 1/2" to 1" ID: -30°F to +250°F (-34°C to +121°C)1-1/8" to 4" ID: -30°F to +200°F (-34°C to +93°C)Series 7399 E-Z FORM ™ HT High Temperature Oil Resistant Suction and Return HoseMay also be used in non-SAE power steering return line applicationsTube:Black CPEReinforcement: Multiple textile braids with wire helixCover:Black hydrogenated nitrile; Greek corrugated finish Size Range (ID): 1/2" to 1"Pressure Range: 150 psi maximum working pressure T emperature Range:-40°F to +302°F (-40°C to +150°C)Designed to handle extreme bends while allowing full-flow, kink-free performance, E-Z Form hose effectively replaces preformed hoses and hose/bent metal tube assemblies in many applications—eliminating special design, tooling and fabrication costs and associatedlong lead times. It also eliminates the need to order prototypes and excessive minimum production quantities. E-Z Form hose is available in three distinct versions, all of which incorporate a helical wire for full suction/vacuum service.E-Z Form hoses are not qualified with Safe Lock SAE J2044 fittings.Parker Hannifin CorporationFluid System Connectors Division (FSC) 300 Parker Dr.Otsego, MI 49078Phone: 269 692 6555Fax: 269 694 4614/fsc BUL SAE J2044 2014-09 2500© 2014 Parker Hannifin Corporation I nformation and specifications subject to change without notice and without liability therefor.Trademarks used herein are the property of their respective owners.Parker Hannifin CorporationIndustrial Hose Products Division (IHP)30242 Lakeland BoulevardWickliffe, OH 44092Customer Service:Toll Free 866 810 HOSE (4673)***********************。
PA04中文资料
Rf
ULTRASONIC DRIVE
CONTROL LOGIC
Ri 1
12
2 PA04
11 10
7 R CL
TUNED TRANSFORMER
Sonar Transducer Driver
EXTERNAL CONNECTIONS
-INPUT
+INPUT
1
12
COMP
2
11
CC R C
3 4
10 TOP
PA04 • PA04A
ABSOLUTE MAXIMUM RATINGS SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
SUPPLY VOLTAGE, +VS to –VS BOOST VOLTAGE
200V SUPPLY VOLTAGE +20V
OUTPUT CURRENT, within SOA
20A
POWER DISSIPATION, internal
200W
INPUT VOLTAGE, differential
±20V
INPUT VOLTAGE, common mode TEMPERATURE, pin solder - 10s
±VS 300°C
TEMPERATURE, junction2
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL prodlit@
Parker Hannifin 电子流量控制阀门DF083系列说明书
SpecificationsRated Flow Maximum Inlet PressureMaximum Internal Leakage Hysteresis Cracking (Deadband)Frequency Operating Temp.Range (Ambient)Cartridge Material Body Material Filtration Mounting (2)(3)Performance CurvesSolenoid Coil SpecificationsResponse Time Within Regulating Zone 50ms Wire Class “H ” for all voltagesVoltage 10VDC 12VDC 18VDC 24VDC 36VDC 48VDC Duty HD.HD.HD.HD.HD.HD.Watts (Nominal)303030303030Amps3.202.301.861.200.880.58Hydraulic Oil 135 SSU @ 100°F (28 cSt)F l o wInput Current12 VDC,30W Coil,200 Hz1.5.5 1.0A2.02.5Flow GainFlow (Q)7.623.81LPM GPM11.4315.14Hydraulic Oil 135 SSU @ 100°F (28 cSt)8.65.26.91.73.5P r e s s u r e D r o p (P )∆Pressure Drop vs.FlowSeries DF083DimensionsSeries DF083Ordering Information3Type08SizeDFProportional Flow Control Valve3/4-16UNF-2B Threaded CavitySealsCode Type Omit Nitrile VFluorocarbonOverride Option******calls out voltage. For example: 851024-012VDC is a 12 volt, 30 watt DC Double Wire coil.Coil Assemblies851018******30 Watt Conduit Coil 851020******30 Watt DIN(Hirschmann) Coil851022******30 Watt Double Spade CoilSERVICE PARTSNitrile Seal Kit: SK08-3Coil Nut: 118113-00Fluorocarbon Seal Kit: SK08-3V DIN Connector:Grey - 692914Black - 692915851024******30 Watt Double Wire Coil 851026******30 Watt Single Screw Coil 851028******30 Watt Single Wire CoilShipping Weight Cartridge Only .31 kg (.69 lbs.)Cartridge in Body .64 kg (1.4 lbs.)N3Flow OptionBody OptionCoil VoltageCoil WattageCoil TerminationMCode Wattage Omit Cartridge without Coil H30 WattTwo Position Three WayCode Port Size & MaterialOmit Cartridge Only 4P1/4″ NPTF (B08-3-4P)SteelA4P 1/4″ NPTF (B08-3-A4P)Aluminum 6P 3/8″ NPTF (B08-3-6P)SteelA6P 3/8″ NPTF (B08-3-A6P)Aluminum 4TSAE-4(B08-3-4T)SteelA4T SAE-4(B08-3-A4T)Aluminum 6T SAE-6(B08-3-6T)SteelA6T SAE-6(B08-3-A6T)Aluminum4B1/4″ BSPG (B08-3-4B)SteelA4B 1/4″ BSPG (B08-3-A4B)Aluminum 6B 3/8″ BSPG (B08-3-6B)SteelA6B3/8″ BSPG (B08-3-A6B)AluminumCode DescriptionOmit Cartridge Without Coil C1/2″ NPTF Conduit Connector with 24″ Class H Wire D DIN 43650(Hirschmann) Plug Face PSAE 1B-0.25 SAE Double Spade (DC Only)S1Single 8-32 screw & nut internally ground (DC Only)WDouble wire 24″ Class H (DC Only)W1Single wire, internally ground, 24″ Class H (DC Only)Code TypeOmit Cartridge Without Coil D01010 VDC D01212 VDC D01818 VDC D02424 VDC D03636 VDC D04848 VDCCode Type MPush TypeManual Override with Flush RodCode Description N311 LPM (3 GPM)@ 70 ∆P。
PF0414中文资料
1
G
(3.7)
4
G
G
3
(1.8)(1.3)(1.8)(1.6)(1.8)(1.3)(1.8) (2.225) (6.875) 13.75 ± 0.3 (Bottom side) (2.975) (6.875) Remark: Coplanarity of bottom side of terminals are less than 0 ± 0.1mm.
1710 MHz 1785 MHz
Apc Voltage VAPC (V) ηT vs. VAPC 50 45 40 Efficiency ηT (%) 35 30 25 20 15 10 5 0 0 0.5 1.0 1.5 VAPC (V) 2.0 2.5 3.0 Vdd = 4.8 V Pin = 3 dBm Rg = R1 = 50 Ω Tc = 25°C
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX
Parker Hannifin 迷你气动阀值类型说明说明书
PneumaticCatalog 0637-4/USA“B” SeriesAir Control ValvesB2 -.16 Cv M5, 1/8" Port B3 -.75 Cv 1/8", 1/4" Port B4 - 1.22 Cv 1/4" PortB5 - 1.40 Cv 1/4", 3/8" Port B6 - 2.70 Cv 3/8" Port B7 - 5.90 Cv 1/2" Port B8 -7.00 Cv3/4" PortIndexWARNINGFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing,are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled “Offer of Sale”.© Copyright 2001, Parker Hannifin Corporation. All Rights Reserved!IndexTable of Contents Air Control ValvesBasic Valve Functions4-Way Valves (2)3-Way Valves (3)Common Part Numbers ......................................................................................... 4-5 Model Number IndexesB2 Series (6)B3 Series (7)B4 Series (8)B5 Series (9)B6 Series (10)B7 & B8 Series (11)IEM Stackable ManifoldsManifolds & Kits (12)Ordering Information (13)Bar ManifoldsIEM Bar Manifolds (14)Subbase Aluminum Bar Manifolds (15)Ordering Information (16)AccessoriesSubbase & Manifolds (17)Sandwich Regulators (18)Featured Valve Options ...................................................................................... 19-20 Electrical Connectors / Accessories .................................................................. 21-22 Technical InformationTechnical Data (23)Solenoid Data (24)Pilot Configuration (25)Repair InformationSolenoid Kits (26)Exploded Views ............................................................................................. 28-33 Dimensions ........................................................................................................ 34-52 Definitions & Weights .. (53)Offer of Sale (56)Operator / Function 7#14Operator / Function 0CE#14APBSingle Solenoid4-Way, 2-PositionDe-energized position – Solenoid operator #14 de-energized.Pressure at inlet port 1 connected to outlet port 2.Outlet port 4 connected to exhaust port 5.Energized position – Solenoid operator #14 energized.Pressure at inlet port 1 connected to outlet port 4.Outlet port 2 connected to exhaust port 3.Double Solenoid4-Way, 2-PositionSolenoid operator #14 energized last. Pressure at inlet port 1connected to outlet port 4. Outlet port 2 connected to exhaust port 3.Solenoid operator #12 energized last.Pressure at inlet port 1connected to outlet port 2. Outlet port 4 connected to exhaust port 5.Single Remote Pilot4-Way, 2-PositionNormal position – Pressure at inlet port 1 connected to outlet port 2. Outlet port 4 connected to exhaust port 5.Operated position – Maintained air signal at port 14.Pressure at inlet port 1 connected to outlet port 4.Outlet port 2 connected to exhaust port 3.Double Remote Pilot 4-Way, 2-PositionMomentary air signal at port 14 last. Pressure at inlet port 1connected to outlet port 4. Outlet port 2 connected toexhaust port 3.Momentary air signal at port 12 last. Pressure at inlet port 1connected to outlet port 2. Outlet port 4 connected to exhaust port 5.Double Solenoid4-Way, 3-PositionDouble Remote Pilot4-Way, 3-PositionDual Pressure:May be used for dual pressure service with pressure at ports 3 & 5. (Use either external pilot source option “K”, “W” or “X”, or dual pressure pilot source option “D” or “E”.) If pilot source “D” or “E” is selected, the high pressure must be at port #3. If pilot source “K”, “W” or “X” is selected, the external pilot must be plumbed to port #14 or “X” respectively. NOTE: The “B6” valve is also available with dual pressure using Port 5 for high pressure (Option “G” & “H”). This is only to be used if converting from a “42” (“CM”) Series traditional valve.In the 3-Position valve, the effect of dual pressure is extremely important when the valve is in the center position, as the CEand PC functions are reversed. Therefore, care should be used when selecting a 3-Position valve.4-Way Valve FunctionsBasic Valve Functions#14#12#12#14#12With #12 operator signaled – inlet port 1 connected tocylinder port 2, cylinder port 4 connected to exhaust port 5.With #14 operator signaled – inlet port 1 connected tocylinder port 4, cylinder port 2 connected to exhaust port 3.Function 8: All Ports BlockedAll ports blocked in the center position.Function 9: Center ExhaustCylinder ports 2 and 4 connected to exhaust ports 3 and 5 in center position. Port 1 is blocked.Function 0: Pressure CenterPressure port 1 connected to cylinder ports 2 and 4, and exhaust ports 3 and 5 blocked in center position.With #12 operator energized – inlet port 1 connected to cylinder port 2, cylinder port 4 connected to exhaust port 5.With #14 operator energized – inlet port 1 connected to cylinder port 4, cylinder port 2 connected to exhaust port 3.Function 5: All Ports BlockedAll ports blocked in the center position.Function 6: Center ExhaustCylinder ports 2 and 4 connected to exhaust ports 3 and 5 in center position. Port 1 is blocked.Function 7: Pressure CenterPressure port 1 connected to cylinder ports 2 and 4, and exhaust ports 3 and 5 blocked in center position.#12#10Single Solenoid3-Way, 2-Position NCNormally Closed:De-energized position – Solenoid #12 de-energized.Pressure at inlet port 1 blocked, outlet port 2 connected to exhaust port 3.Energized position – Solenoid #12 energized.Pressure at inlet port 1 connected to outlet port 2,exhaust port 3 is blocked.Single Solenoid3-Way, 2-Position NONormally Open:De-energized position – Solenoid #10 de-energized. Pressure at inlet port 1 connected to outlet port 2,exhaust port 3 is blocked.Energized position – Solenoid #10 energized.Pressure at inlet port 1 blocked, outlet port 2 connected to exhaust port 3.Double Solenoid3-Way, 2-PositionSolenoid operator #12 energized last.Pressure at inlet port 1connected to outlet port 2, exhaust port 3 is blocked.Solenoid operator #10 energized last. Pressure at inlet port 1blocked, outlet port 2 connected to exhaust port 3.Single Remote Pilot 3-Way, 2-Position NCNormally Closed:Normal position – Pressure at inlet port 1 blocked,outlet port 2 connected to exhaust port 3.Operated position – Maintained air signal at port 12.Pressure at inlet port 1 connected to outlet port 2,exhaust port 3 is blocked.Single Remote Pilot3-Way, 2-Position NONormally Open:Normal position – Pressure at inlet port 1 connected to outlet port 2, exhaust port 3 is blocked.Operated position – Maintained air signal at port 10.Pressure at inlet port 1 blocked, outlet port 2 connected to exhaust port 3.Double Remote Pilot3-Way, 2-PositionMomentary air signal at port 12 last. Pressure at inlet port 1connected to outlet port 2, exhaust port 3 is blocked.Momentary air signal at port 10 last. Pressure at inlet port 1blocked, outlet port 2 connected to exhaust port 3.3-Way Valve / Dual 3/2 Valve FunctionsBasic Valve FunctionsDual 3-WayCombines the functions of T wo 3-Way valves into One valve body . The valve can be configured as Two Normally Closed 3-Way FunctionsTwo Normally Open 3-Way FunctionsOne Normally ClosedANDOne Normally Open 3-Way Functions42531#14#1242531#14#1242531#14#12#12#10#12#10#12#10#12#10#12Solenoid, 3-Way & 4-WayCommon Part NumbersSingle Solenoid4-Way, 2-PositionDouble Solenoid4-Way, 2-PositionSingle Solenoid3-Way, 2-Position, NCDouble Solenoid4-Way, 3-Position,APB3-Pin DIN 43650C Electrical Connection,Non-Locking Flush Override.InlineInlineInlineInline#12B3 thru B8B2 OnlyInternal Air Return Spring / Air Return#14B3 thru B8B2 OnlyInternal Air Return Spring / Air Return#12#10#12APB#12Remote Pilot, 3-Way & 4-WayCommon Part NumbersSingle Remote Pilot4-Way, 2-PositionDouble Remote Pilot4-Way, 2-PositionSingle Remote Pilot3-Way, 2-Position, NCDouble Remote Pilot4-Way, 3-Position, APBInlineInlineInlineInlineB3 thru B8B2 OnlyB3 thru B8B2 OnlyInternal Air Return Spring/Air ReturnInternal Air ReturnSpring/Air Return#12#10Basic Operator/Port Size/Pilot Source/Enclosures/EngineeringBasic Operator/Port Size/Pilot Source/Enclosures/EngineeringBasic Operator/Port Size/Pilot Source/Enclosures/EngineeringBasic Operator/Port Size/Pilot Source/Enclosures/EngineeringBasic Operator/Port Size/Pilot Source/Enclosures/EngineeringBOLD OPTIONS ARE STANDARDBasic Operator/Port Size/Pilot Source/Enclosures/EngineeringB7 & B8 SeriesIEM Stackable ManifoldsEnd Plate KitsTransition Plate Kit•Combines B3 and B5 4-Way valves into a common inlet and exhaust manifold system. Looking at the #12 end, the B5 is on the right and the B3 is on the left.•Kit includes: B3 end plate, B3/B5 transition plate, B5 end Kit includes: Right and Left End Plate, o-rings, socket head cap screws, flat washers and lockwashers.* B4 & B5 4-Way use the same Kit.ManifoldsIEM Stackable Manifolds & KitsStation Station Station Station 1234Example:Application requires a 4-station manifoldwith flow controls and requires isolationbetween station 2 & 3 for all three main galleys.Qty.Part No.Comment1AAB3FC04041B32FBD553C ..............Station 11B31FBE553C ..............Station 21PS2919P .....................Galley 1, 3, 5Between Station 2 & 31B31FBB553C ..............Station 31B35FBB553C ..............Station 414 End12 EndLooking at 12 EndIEM Stackable Add-A-Fold AssembliesOrdering InformationXXT otal Number of StationsNumber of Flow Controlbases in assembly (Omit if none)3-Way Valve B34-Way Valve 3-Way Valve B44-Way Valve B54-Way ValveAAAdd-A-Fold AssemblyHow To Order IEM Stackable Add-A-Fold Assemblies1.List Add-A-Fold Assembly call out.This automatically includes the end plate kit,manifold bases and assembly.2.List complete inline valve model number,listing left to right LOOKING A T THE #12 END of the manifold. The left most station is station 1.(If a blank station is needed, list theBlank Plate part number at the desired station.)*Flow control bases must start at station 1 in Add-A-Folds.Example: AAB3FC0206. Station 1 & 2 have flow controls, station 3 – 6 do not.B3B4B5B5 SeriesIEM Bar Manifolds (Inlet / Exhaust Manifold)Bar Manifolds35mm DIN 4-Way3-Way4-Way3-Way4-Way3-Way4-Way3-WayCylinder Port # of Model NumberSubbase Aluminum Bar Manifolds (5-Ported)Bar Manifolds•Utilizes Subbase mount B2 valves.•3-Way & 4-Way valves interchangeable.•External Pilot Valves – “X” or “W”, must be used.•Common External Pilot galley is field convertible from Internal to External Pilot.(Shipped as Internal Pilot from factory.)35mm DIN Rail MountInternal ExternalKit includes:Subbase –(1) manifold (bolts & gasket comewith subbase valve).•Utilizes Subbase mount B3 valves.•Available for 4-Way valves. If 3-Way function is required,plug a cylinder port.•Common External Pilot galley is standard.•Standard Internal Pilot valves need not use this galley,and the galley does not need to be plugged.•External Pilot Valves – “X” or “W”, must have Common External Galley pressurized.35mm DINHow To Order Aluminum Bar Manifold Assemblies1.List Manifold Assembly call out. Use AA +the part number of the aluminum bar manifold.This automatically includes the aluminum bar manifold and assembly.2.List complete valve model number, listing left toright, LOOKING AT THE #12 END of the manifold.The left most station is station 1.(If a blank station is needed, list the blanking plate part number at the desired station.)#12 End#14 EndExample:Application requires a 3-station “B3”3-Way manifold with station #1 blankedoff with valves assembled.Qty.Part No.Comment1AAPSG3BXN03NP1PS2966P .....................Station 11B330000XXC...............Station 21B3J0BB553C...............Station 3Station Station Station 123Looking at 12 EndAluminum Bar Manifold AssembliesOrdering InformationUse Aluminum Bar Manifold Kit Numbers from previous pages.Manifold AssemblySubbase / ManifoldsAccessoriesSubbaseBlanking PlateKit includes: (2) Screws, (2) Nuts, (2) ClampsDIN Rail Hardware Kit。
APC_80_C_080507_仕様书
2 列引线型元件
SOP, 连接器 「在 2 方向有引线」
0.3 mm 间距 ～ 0.5 mm 间距
4 列引线型元件
QFP 「在 4 方向有引线」
0.3 mm 间距 ～ 0.5 mm 间距
焊锡球型元件
BGA, CSP, FC 「四方形内有圆形电极」 而且是「等间距排列」
0.3 mm 间距 ～ 0.5 mm 间距
封装芯片元件（等间距的引线排列例子） ② ③ ④ ⑤ ⑥ ⑦ ⑧ 基板定位标记 A 基板定位标记 B 通过定位标记识别结果的贴装元件的理论坐标 通过识别处理计算所得引线部焊膏重心坐标 根据 计算所得贴装元件的坐标 X 方向的印刷位置偏移量 dx Y 方向的印刷位置偏移量 dy 角度方向的印刷位置偏移量 dθ
-4-
APC-80
2008.0507
印刷位置偏移量 从基板定位标记的识别得到， 从贴装坐标原点到贴装元件的X Y坐标理论值和， 计测所得焊膏印刷位置的差dx dy dθ 就是印刷位置偏移量。 方形芯片元件 4 7 1 5 3 6 2 8 基板定位标记 A 基板定位标记 B 通过定位标记识别结果的贴装元件的理论坐标 贴装元件的 X 理论坐标 贴装元件的 Y 理论坐标 通过焊膏印刷位置计测结果的贴装元件坐标 X 方向的印刷位置偏移量 dx Y 方向的印刷位置偏移量 dy 角度方向的印刷位置偏移量 dθ
-2-
APC-80
2008.0507
APC-80对应生产线例（反馈）
焊膏印刷偏移 焊膏印刷面积的计测
焊膏
焊盘
印刷位置偏移
焊盘
焊膏
丝网印刷机 SP60
外观检查机 VC45C
贴装机 CM602
贴装机 CM602
回流焊炉
Parker domnick hunter气体生成器产品目录说明书
GAS CHROMATOGRAPHY PRODUCT CATALOGUEOffering a wide range of advantages over the traditional cylinder gas supply, gas generators are increasingly becoming the popular choicein many laboratories.Consistent, reliable purityThe purity of gas from different cylinders can vary, and impurities can be introduced via the pipeline when cylinders are changed. Parker domnick hunter gas generators, however, will prevent variations in quality and supply consistentlyhigh-purity gas to ensure extremely sensitive analysis, every time.Supported by the latest advanced technologies, you can trust Parker domnick hunter gas generators to deliver the reliability and consistency your work demands.Maximum uptime, minimal downtimeUnlike cylinders, which can run out mid-process and require re-calibration, generators can produce gas around the clock, 24/7. They also reducethe inconvenience caused by having to carry out inventories, re-order cylinders, arrange collection and delivery and carry out ‘leak checks’.Parker domnick hunter gas generators require quick and simple maintenance, with longer intervals between scheduled services. This means downtime is minimised, so you can enjoy significantly increased uptime and greater opportunity for the throughput of samples for analysis, which will have a positive effect on the profitability of your lab operations.Continuous supply, available on-demandA permanently installed solution at the point of use in your work environment, a generator will give you easy access to an unlimited supply of gas. This will always be at the correct pressure, flow and temperature, to improve the stability of your instruments and the accuracy of your results.Expert gas generation solutionsWith a history of expertise in gas generation, Parker are perfectly placed to support reliable and highly profitable operations in analytical science. Working with partners in laboratories across a range of sectors, our industry-leading solutions enable accuracy to be achieved through a constant, on-demand supply of nitrogen, hydrogen and zero air for carrier, make-up and fuel gas.A safer choiceHigh-pressure cylinders are inherently linked to safety issues – from the chance of injury frommanual handling to the risk of explosion and gas leaks, which can make the atmosphere potentially explosive or defi cient in oxygen. Gas generators from Parker domnick hunter are a safe alternative, thanks to leak detectiontechnology with ‘auto shut off’ and integral alarms.They also operate at a fraction of the pressure and have low volumes of stored gas, reducingthe potential for harm.Cost effi cient with the lowest lifetime costIn some cases, you can expect to have recouped the cost of your gas generator in less than oneyear. There are no hidden charges – such ason-going delivery costs, cylinder rental and storage fees for spares and empty cylinders,maintenance costs are low and part replacement is minimal. Their super high energy effi ciencyalso makes them a cost effective choice.Global support for your peace of mindWe know that business continuity is vital toyour work. That’s why we offer a comprehensivepackage of expert service, care and maintenance across our complete analytical gas systems range, worldwide.From installation, scheduled maintenance and in very rare cases, emergency assistance, wherever you are, you can trust Parker to give you complete peace of mind.Carrier gasThe mobile phase of gas chromatography requiresa carrier gas. Parker understands that purity of a carrier gas is essential, as contaminants can cause column damage andinaccuracies in detection results.We provide gas generation for frequently used carrier gases, such as hydrogen and nitrogen, providing you with a dry, high-purity, oxygen-free and chemically inert gas, that is both consistently available and cost-efficient.H-MDUsing proven PEM cell technology, Parker domnick hunter H-MDrange generators produce a continuous supply of high-purity hydrogen, for use as carrier gas, on-demand from de-ionized water and electricity. This model works at low pressure and with minimal stored volume, offering you added safety. • Continuous supply of 99.99995% purity hydrogen • Precision engineered - simple installation and operation • Compact design - save space in your laboratory • Minimal maintenance - maximum uptime and low running costs• O ptimum safety and reliability - innovative intelligent control software and alarms • Easy to manage - control a number of generators from one central PCNote: Also suitable for use as fuel gasUHP-N2Featuring proven, advanced technology and engineered to the highest standard, Parker UHP-N2 generates a continuous stream of ultra high-purity nitrogen. Ideal for carrier gas applications, it is fully approved for use by major instrumentation manufacturers, giving you complete peace of mind. • Continuous supply of ultra high-purity nitrogen at 99.9999% purity• Engineered to ensure maximum reliability and minimal operator attention• Compact design – requires minimal space in your laboratory • Advanced noise reduction technology - a quieter working environment• Economy mode - signifi cantly reduced running costs and increased compressor life• Single plug & play unit – saves you valuable time • With or without an integral compressor Note: Also suitable for use as make-up gas*With respect to oxygenTechnical Data*With optional AWFWeights and DimensionsPreventative MaintenanceOptional Extras*Purity with respect to oxygenNote: Add suffix ‘E’ for 207-253V 50/60Hz ie. UHPN2 - 750 - E Add suffix ‘W’ for 103 - 126V 60Hz ie. UHPN2 - 750 - W1500 not available in WTechnical Data*Non compressor models onlyWeights and DimensionsPreventative MaintenanceOptional ExtrasFuel gasUsed to support combustion within the detector, the hydrogen-air gas creates an ideal fl ame for analysis.Parker provides gas generation solutions for fl ame support – a mix of hydrogen and zero air – to ensure accurate analyses, consistent results and detector sensitivity thanks to a high intensity flame.HUsing proven PEM cell technology, Parker domnick hunterH range generators produce a continuous supply of high purity hydrogen, for use as fuel gas, on-demand from de-ionized water and electricity. This model works at low pressure and with minimal stored volume, offering you added safety.• Continuous supply of 99.9995% purity hydrogen • Precision engineered - simple installation and operation • Compact design - save space in your laboratory• Minimal maintenance - maximum uptime and low running costs • Optimum safety and reliability - innovative intelligent control software and alarms• Easy to manage - control a number of generators from one central PCUHP-ZAParker UHP-ZA produces ultra high-purity zero grade air from an existing compressed air source. Ensuring a lower and more stable baseline signal, it allows for higher sensitivity or larger peak areas so you can enjoy superior limits of detection over and above traditional modes of supply.• E ngineered with state-of-the-art components - enhanced reliability and long term performance• Minimal operator attention and maintenance required • Silent operation - improved working environment • Compact design - save space in your laboratory• Low operating costs - economical alternative to cylinders • I nnovative, stackable system – facilitates the mountingof a Parker domnick hunter hydrogen generator*With respect to oxygenTechnical Data*With optional AWFWeights and Dimensions*With respect to oxygenNote: For auto water fill option add suffix AWF ie 20H-AWF Preventative Maintenance*20H Continuous operation aprox. 6 to 7 months*40H Continuous operation aprox. 4 to 5 months*60H Continuous operation aprox. 2 to 3 months Optional ExtrasAdd suffix ‘W’ for 103-126V 60Hz ie. UHP - 10ZA-S-W Technical DataWeights and DimentionsPreventative MaintenanceOptional ExtrasUHP-ZN2An industry leading dual gas generator, the UHP-ZN2 delivers nitrogen and zero air for make-up gas applications. Producing ultra high-purity nitrogen from standard compressed air, with <0.1 ppm hydrocarbon content, it will enable you to achieve the most accurate results.• Continuous supply of ultra high-purity, organic free nitrogen • E ngineered to ensure maximum reliability and minimal operator attention • Compact design – requires minimal space in your laboratory • Noise reduction technology - a quieter working environment • Integral heated catalyst – ensures carrier grade nitrogen • E conomy mode - signifi cantly reduced running costs and increased compressor life • Single plug & play unit – saves you valuable time • With or without an integral compressor Note: Also suitable for use as carrier gasG6010 & G7010The Parker domnick hunter nitrogen and dry air generators employ robust, fi eld proven technology to produce ultra high-purity nitrogen and dry air suitable for make-up gas applications. This model combines innovative technology, compact design and functionality to provide a continuous stream of nitrogen which guarantees to improve analysis and reproducibility.• Continuous supply of nitrogen at 99.999% purity and dry air • Proven analytical performance – peace of mind • Compact design – save space in your laboratory• M inimal operator attention and maintenance – maximised up-time and reduced running costs • Noise reduction technology – quieter working environment • Lowest lifetime cost – payback typically less than 24 months • With or without integral oil free compressor • Single plug & play unit – saves you valuable timeMake-up gasUsed to enhance the movement of carbon ions through the detector to improve the signal, make-up gases can also improve the sensitivity of detection in gas chromatography.At Parker, we know that a constant fl ow of an inert make-up gas is crucial to maintaining the best analytical conditions. Nitrogen makes an ideal make-up gas, thanks to its cost effectiveness at large volumes, and our generators can supply you with an unlimited source of high-purity nitrogen,on-demand.*Purity with respect to oxygenNote: Add suffix ‘E’ for 207-253V 50/60Hz ie. UHPZN2 - 1000 - E Add suffix ‘W’ for 103 - 126V 60Hz ie. UHPZN2 - 1000 - WTechnical Data*Non compressor models onlyWeights and DimensionsPreventative MaintenanceOptional Extras*Purity with respect to oxygenNote: Not available in 110V 60HZ Technical DataWeights and DimensionsPreventative MaintenanceOptional ExtrasWorking with partners in laboratories across theworld, in a variety of sectors, our gas solutionsfulfi l a complex need, yet are engineered for ease ofuse. They enable accuracy to be achieved through areliable, on-demand supply of high-purity hydrogen,nitrogen and zero air.Reliable, dependable and durableWith the largest installed base of gas generatorsworldwide – in excess of 50,000 – our technologyhas earned an enviable global reputation for qualityand reliability.Using our range of patented technologies, Parkerdomnick hunter generators offer a range of uniqueperformance benefi ts. These include near silentoperation, few moving parts and minimal operatorattention – with safety and cost effi ciencyas standard.Global supportThe leading provider of gas systems for the analytical instrument market, Parker domnick hunter provide gasgenerators that specifi cally meet the stringent requirementsfor all the leading analytical instrument manufacturers. for the analytical hunter provide gas e stringent requirements ent manufacturers.For more information or a detailed discussion about your specific requirements please contact Parkeror an authorised Parker distributor.Europe, Middle East, Africa AE – United Arab Emirates,DubaiTel: +971 4 8127100********************AT – Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0*************************AT – Eastern Europe, Wiener NeustadtTel: +43 (0)2622 23501 900**************************** AZ – Azerbaijan, BakuTel: +994 50 2233 458****************************BE/LU – Belgium, NivellesTel: +32 (0)67 280 900*************************BG – Bulgaria, SofiaTel: +359 2 980 1344**************************BY – Belarus, MinskTel: +48 (0)22 573 24 00************************CH – Switzerland, EtoyTel: +41 (0)21 821 87 00***************************** CZ – Czech Republic, Klecany Tel: +420 284 083 111******************************* DE – Germany, KaarstTel: +49 (0)2131 4016 0*************************DK – Denmark, BallerupTel: +45 43 56 04 00*************************ES – Spain, MadridTel: +34 902 330 001***********************FI – Finland, VantaaTel: +358 (0)20 753 2500*************************FR – France, Contamine s/Arve Tel: +33 (0)4 50 25 80 25************************GR – Greece, AthensTel: +30 210 933 6450************************HU – Hungary, BudaörsTel: +36 23 885 470*************************IE – Ireland, DublinTel: +353 (0)1 466 6370*************************IL – IsraelTel: +39 02 45 19 21************************IT – Italy, Corsico (MI)Tel: +39 02 45 19 21***********************KZ – Kazakhstan, AlmatyTel: +7 7273 561 000**************************** NL – The Netherlands, Oldenzaal Tel: +31 (0)541 585 000********************NO – Norway, AskerTel: +47 66 75 34 00************************PL – Poland, WarsawTel: +48 (0)22 573 24 00************************PT – PortugalTel: +351 22 999 7360**************************RO – Romania, BucharestTel: +40 21 252 1382*************************RU – Russia, MoscowTel: +7 495 645-2156************************SE – Sweden, SpångaTel: +46 (0)8 59 79 50 00************************SK – Slovakia, Banská Bystrica Tel: +421 484 162 252**************************SL – Slovenia, Novo MestoTel: +386 7 337 6650**************************TR – Turkey, IstanbulTel: +90 216 4997081************************UA – Ukraine, KievTel: +48 (0)22 573 24 00************************Parker WorldwideUK – United Kingdom, WarwickTel: +44 (0)1926 317 878********************ZA – South Africa, Kempton ParkTel: +27 (0)11 961 0700*****************************North AmericaCA – Canada, Milton, OntarioTel: +1 905 693 3000US – USA, ClevelandTel: +1 216 896 3000Asia PacificAU – Australia, Castle HillTel: +61 (0)2-9634 7777CN – China, ShanghaiTel: +86 21 2899 5000HK – Hong KongTel: +852 2428 8008IN – India, MumbaiTel: +91 22 6513 7081-85JP – Japan, TokyoTel: +81 (0)3 6408 3901KR – South Korea, SeoulTel: +82 2 559 0400MY – Malaysia, Shah AlamTel: +60 3 7849 0800NZ – New Zealand, Mt WellingtonTel: +64 9 574 1744SG – SingaporeTel: +65 6887 6300TH – Thailand, BangkokTel: +662 186 7000TW – Taiwan, TaipeiTel: +886 2 2298 8987South AmericaAR – Argentina, Buenos AiresTel: +54 3327 44 4129BR – Brazil, Sao Jose dos CamposTel: +55 800 727 5374CL – Chile, SantiagoTel: +56 2 623 1216MX – Mexico, TolucaTel: +52 72 2275 4200© 2019 Parker Hannifin Corporation. All rights reserved.EMEA Product Information CentreFree phone: 00 800 27 27 5374(from AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE, IL,IS, IT, LU, MT, NL, NO, PL, PT, RU, SE, SK, UK, ZA)US Product Information CentreToll-free number: 1-800-27 27 537/gsfeCATGASCHROMA-01-ENYour local authorized Parker distributor。
Parker Hannifin 流量分配 聚合器系列 L04A3 商品说明书
Flow Rating Seals
Body
Port
Flow Divider/
and Ratio
Material
Size
Combiner Valve
Code Total Flow Rating - Port 2 (Flow Ratio)
5-5 6-10 LPM (1.6-2.6 GPM) (50/50 Ratio)
13.2
15.9
Flow (Q)
Technical Data
FC45
Parker Hannifin Corporation Hydraulic Cartridge Systems
Catalog HY15-3502/US
Technical Information
Dimensions Millimeters (Inches)
Check Valves
Catalog HY15-3502/US
Technical Information
CV
General Description
Spool Type, Flow Divider/Combiner Valve. For additional information see Technical Tips on SH pages FC1-FC4.
Bodies & Cavities
Form Tool TD
Rougher NFT10-4R Finisher NFT10-4F
Performance Curve
Pressure Drop vs. Flow (Through cartridge only)
PSI Bar
Hydraulic Oil 150 SSU @ 100°F (32 cSt)
Parker Hannifin 4MA 气缸胶带套件说明书
1 3
RG04MA0131 RG04MA0171
RG04MA0135 RG04MA0175
RG04MAH131 RG04MAH171
RG04MAH135 RG04MAH175
RG04MAM131 RG04MAM171
RG04MAM135 75 - 80 102 - 108 RG04MAM175 90 - 95 122- 129
Temperatures:
B • Nitrile -10°F to +165°F (-23°C to +74°C) • Fluorocarbon -10°F to +250°F (-23°C to +121°C)
12
A
11 13
Magnetic Ring (Order seperately if required)
No. Nitrile Seals Fluorocarbon Seals Nitrile Seals Fluorocarbon Seals Nitrile & PUR Seals Fluorocarbon Seals
Kit Number
Kit Number
Kit Number
Kit Number
Kit Number
Air leakage around the piston rod at the gland area will normally indicate a need to replace the gland cartridge.
The Parker 4MA gland is a unique cartridge design. It is threaded into the cylinder head and all sizes are removable without disturbing the endcap fasteners.
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
© 2000 California Micro Devices Corp. All rights reserved.
TRANSIENT VOLTAGE SUPPRESSOR ARRAYS
Features
2, 3, 4, 5, or 6 transient voltage suppressors in a single surface-mount package.
Compact SMT packages save board space and ease layout in space critical applications compared to discrete solutions.
In-system ESD protection to 20kV contact discharge per IEC 61000-4-2 International Standard.Product Description
The PACDN042, PACDN043, PACDN044, PACDN045, and PACDN046 are transient voltage suppressor arrays that provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The devices are designed and characterized to safely dissipate ESD strikes at levels well beyond the maximum requirements set forth in the IEC 61000-4-2 International Standard (Level 4, 8kV contact discharge). All pins are rated at 20kV ESD using the IEC 61000-4-2 contact discharge method.
Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, all pins are protected for contact discharges to greater than 30kV .Applications
ESD protection of PC ports, e.g. USB port. Protection of interface ports or IC pins which are exposed to high levels of ESD.
C1470800
* ESD applied between channel pin and ground, one at a time. All other channels are open. All GND pins grounded. This parameter is guaranteed by design and characterization.. Note: GND in this document refers to the lower supply voltage.
Schematic Configurations
©2000 California Micro Devices Corp. All rights reserved.
When placing an order please specify desired shipping: Tubes or Tape & Reel.。