CT-6P205中文资料

合集下载

IEC61215标准(中文版)[1]

3. 系列号
4. 终端或导线的正负极（可用颜色区别）
5. 每块组件所适合的系统电压生产日期和地点应标注在组件上或可从系列号追溯
主要目测缺陷
1。外表面破损，裂纹，或磨损，包括上表面，背面，边框和接线盒。
2。外表面弯曲（包括上表面，背面，边框和接线盒）到组件的安装或运行将被损坏的程度。
3。在一个电池片上的裂纹扩展超过其面积的 10%。 4。气泡和分层在电路的任何部位和组件的边缘之
2 。电路 (no sample has exhibited any open-circuit during the
tests)
3 。目测迹象 (There is no visual evidence of a major defect)
4 。绝缘性 (The insulation test requirements are met after the
取样
根据 IEC 60410 标准， 8 块用于质量测试的组件
应从一批或几批产品中任意抽取。
通过的标准：
1 。最大输出 (The degradation of Max. output power does not
exceed the prescribed limit after each test nor 8% after each test sequence)
度系数
.
过程省略。
5 。电池额定工作温度的测量
额定工作温度是指在标准参考环境 (SRE),敞开式支架安装下，太阳电池的平均平衡结温。在系统设计中
,比较
情况
不同组件设计的性能时该参数是一个很有价值的参数。环境 (SRE): ? 倾角 :与水平面成 45°的倾斜 .

ZR36060PQC中文资料(List Unclassifed)中文数据手册「EasyDatasheet - 矽搜」

s 支持8位和16位YUV视频接口 s 支持视频同步主从模式
应用
s 桌面视频编辑子系统 s PCMCIA视频采集卡 s 数码相机
Байду номын сангаас
ZR36060
综合JPEG编解码器
s 接口各种主机控制器,范围从专用高性能ZR36057 PCI控制器
以通用低成本微控制器
s 灵活压缩数据接口： - 8位主模式下,支持高达30兆字节传输/ sec - 16位从模式,支持高达16.7转移兆字节/秒 - 8位从模式,支持高达8.3兆字节传输/ sec
芯片中文手册,看全文,戳
集成JPEG编解码器
特征 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
应用. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
引脚说明. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
视频接口. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
视频可同步 - 主从模式. . . . . . . . . . . . . . . . . . . . . . 8 主模式. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8 从模式. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9

HY57V561620CT-6中文资料

4 Banks x 4M x 16Bit Synchronous DRAMThis document is a general product description and is subject to change without notice. Hynix Semiconductor Inc. does not assume any responsibility forDESCRIPTIONThe HY57V561620C is a 268,435,456bit CMOS Synchronous DRAM, ideally suited for the main memory applications which require large memory density and high bandwidth. HY57V561620C is organized as 4banks of 4,194,304x16.HY57V561620C is offering fully synchronous operation referenced to a positive edge of the clock. All inputs and outputs are synchro-nized with the rising edge of the clock input. The data paths are internally pipelined to achieve very high bandwidth. All input and output voltage levels are compatible with LVTTL.Programmable options include the length of pipeline (Read latency of 2 or 3), the number of consecutive read or write cycles initiated by a single control command (Burst length of 1,2,4,8 or full page), and the burst count sequence(sequential or interleave). A burst of read or write cycles in progress can be terminated by a burst terminate command or can be interrupted and replaced by a new burst read or write command on any cycle. (This pipelined design is not restricted by a `2N` rule.)FEATURES•Single 3.3±0.3V power supply•All device pins are compatible with LVTTL interface •JEDEC standard 400mil 54pin TSOP-II with 0.8mm of pin pitch•All inputs and outputs referenced to positive edge of sys-tem clock•Data mask function by UDQM, LDQM •Internal four banks operation•Auto refresh and self refresh •8192 refresh cycles / 64ms•Programmable Burst Length and Burst Type - 1, 2, 4, 8 or Full page for Sequential Burst- 1, 2, 4 or 8 for Interleave Burst•Programmable CAS Latency ; 2, 3 ClocksORDERING INFORMATIONPart No.Clock FrequencyPower Organization Interface PackageHY57V561620CT-6166MHz Normal4Banks x 4Mbits x16LVTTL 400mil 54pin TSOP IIHY57V561620CT-K 133MHz HY57V561620CT-H 133MHz HY57V561620CT-8125MHz HY57V561620CT-P 100MHz HY57V561620CT-S 100MHz HY57V561620CLT-6166MHz Low powerHY57V561620CLT-K 133MHz HY57V561620CLT-H 133MHz HY57V561620CLT-8125MHz HY57V561620CLT-P 100MHz HY57V561620CLT-S100MHzPIN CONFIGURATIONPIN DESCRIPTIONPIN PIN NAME DESCRIPTIONCLK Clock The system clock input. All other inputs are registered to the SDRAM on the rising edge of CLKCKE Clock Enable Controls internal clock signal and when deactivated, the SDRAM will be one of the states among power down, suspend or self refreshCS Chip Select Enables or disables all inputs except CLK, CKE, UDQM and LDQMBA0, BA1Bank Address Selects bank to be activated during RAS activity Selects bank to be read/written during CAS activityA0 ~ A12Address Row Address : RA0 ~ RA12, Column Address : CA0 ~ CA8 Auto-precharge flag : A10RAS, CAS, WE Row Address Strobe,Column Address Strobe,Write EnableRAS, CAS and WE define the operationRefer function truth table for detailsUDQM, LDQM Data Input/Output Mask Controls output buffers in read mode and masks input data in write mode DQ0 ~ DQ15Data Input/Output Multiplexed data input / output pinV DD/V SS Power Supply/Ground Power supply for internal circuits and input buffersV DDQ/V SSQ Data Output Power/Ground Power supply for output buffersNC No Connection No connectionFUNCTIONAL BLOCK DIAGRAM4Mbit x 4banks x 16 I/O Synchronous DRAMABSOLUTE MAXIMUM RATINGSParameter Symbol Rating Unit Ambient Temperature T A0 ~ 70°CStorage Temperature T STG-55 ~ 125°CVoltage on Any Pin relative to V SS V IN, V OUT-1.0 ~ 4.6VVoltage on V DD relative to V SS V DD, V DDQ-1.0 ~ 4.6VShort Circuit Output Current I OS50mAPower Dissipation P D1WSoldering Temperature ⋅ Time T SOLDER260 ⋅ 10°C⋅ SecNote : Operation at above absolute maximum rating can adversely affect device reliabilityDC OPERATING CONDITION (TA=0 to 70°C)Parameter Symbol Min Typ.Max Unit Note Power Supply Voltage V DD, V DDQ 3.0 3.3 3.6V1 Input High Voltage V IH 2.0 3.0VDDQ + 0.3V1,2 Input Low Voltage V IL- 0.300.8V1,3 Note :1.All voltages are referenced to V SS = 0V2.V IH (max) is acceptable 5.6V AC pulse width with ≤3ns of duration3.V IL (min) is acceptable -2.0V AC pulse width with ≤3ns of durationAC OPERATING CONDITION (TA=0 to 70°C, V DD=3.3 ± 0.3V, V SS=0V)Parameter Symbol Value Unit Note AC Input High / Low Level Voltage V IH / V IL 2.4/0.4VInput Timing Measurement Reference Level Voltage Vtrip 1.4VInput Rise / Fall Time tR / tF1nsOutput Timing Measurement Reference Level Voutref 1.4VOutput Load Capacitance for Access Time Measurement CL50pF1 Note :1. Output load to measure access time is equivalent to two TTL gates and one capacitor (50pF)For details, refer to AC/DC output circuitCAPACITANCE (TA=25°C , f=1MHz)OUTPUT LOAD CIRCUITDC CHARACTERISTICS I (TA=0 to 70°C , V DD =3.3±0.3V)Note :1.V IN = 0 to 3.6V, All other pins are not tested under V IN =0V2.D OUT is disabled, V OUT =0 to3.6VParameterPinSymbol-6/K/H-8/P/SUnitMinMax Min Max Input capacitanceCLKC I1 2.5 3.5 2.5 4.0pF A0 ~ A12, BA0, BA1, CKE, CS, RAS, CAS, WE, UDQM, LDQMCI 2 2.5 3.8 2.5 5.0pF Data input / output capacitanceDQ0 ~ DQ15C I/O4.06.54.06.5pFParameterSymbolMin.Max Unit Note Input Leakage Current I LI -11uA 1Output Leakage Current I LO -11uA 2Output High Voltage V OH 2.4-V I OH = -4mA Output Low VoltageV OL-0.4VI OL = +4mADC CHARACTERISTICS II (TA=0 to 70°C , V DD =3.3±0.3V, V SS =0V)Note :1.I DD1 and I DD4 depend on output loading and cycle rates. Specified values are measured with the output open2.Min. of tRRC (Refresh RAS cycle time) is shown at AC CHARACTERISTICS II3.HY57V561620CT-6/K/H/8/P/S4.HY57V561620CLT-6/K/H/8/P/SParameterSymbolTest ConditionSpeedUnitNote-6-K -H -8-P -S Operating CurrentI DD1Burst length=1, One bank active t RC ≥ t RC (min), I OL =0mA 130110110100100100mA1Precharge Standby Current in Power Down ModeI DD2P CKE ≤ V IL (max), t CK = 15ns 2mAI DD2PSCKE ≤ V IL (max), t CK = ∞1Precharge Standby Current in Non Power Down ModeI DD2NCKE ≥ V IH (min), CS ≥ V IH (min), t CK = 15ns Input signals are changed one time during 30ns. All other pins ≥ V DD -0.2V or ≤ 0.2V 20mAI DD2NSCKE ≥ V IH (min), t CK = ∞Input signals are stable.10Active Standby Current in Power Down ModeI DD3P CKE ≤ V IL (max), t CK = 15ns 3mAI DD3PSCKE ≤ V IL (max), t CK = ∞3Active Standby Current in Non Power Down ModeI DD3NCKE ≥ V IH (min), CS ≥ V IH (min), t CK = 15ns Input signals are changed one time during 30ns. All other pins ≥ V DD -0.2V or ≤ 0.2V 30mAI DD3NSCKE ≥ V IH (min), t CK = ∞Input signals are stable.25Burst Mode Operating CurrentI DD4t CK ≥ t CK (min), I OL =0mA All banks active150130130130110110mA 1Auto Refresh Current I DD5t RRC ≥ t RRC (min), All banks active 220220220200200200mA 2Self Refresh CurrentI DD6CKE ≤ 0.2V3mA31.5mA4AC CHARACTERISTICS I (AC operating conditions unless otherwise noted)Note :1.Assume tR / tF (input rise and fall time ) is 1ns2.Access times to be measured with input signals of 1v/ns edge rateParameterSymbol-6-K-H-8-P-SUnitNoteMinMaxMin MaxMin MaxMin MaxMin MaxMin MaxSystem Clock Cycle TimeCAS Latency = 3tCK3610007.510007.5100081000101000101000nsCAS Latency = 2tCK27.57.510101012ns Clock High Pulse Width tCHW 2.5- 2.5- 2.5-3-3-3-ns 1Clock Low Pulse Width tCLW 2.5- 2.5- 2.5-3-3-3-ns 1Access TimeFrom ClockCAS Latency = 3tAC3- 5.4- 5.4- 5.4-6-6-6ns2CAS Latency = 2tAC2-6- 5.4-6-6-6-6ns Data-Out Hold Time tOH 2.7- 2.7- 2.7-3-3-3-ns Data-Input Setup Time tDS 1.5- 1.5- 1.5-2-2-2-ns 1Data-Input Hold Time tDH 0.8-0.8-0.8-1-1-1-ns 1Address Setup Time tAS 1.5- 1.5- 1.5-2-2-2-ns 1Address Hold Time tAH 0.8-0.8-0.8-1-1-1-ns 1CKE Setup Time tCKS 1.5- 1.5- 1.5-2-2-2-ns 1CKE Hold Time tCKH 0.8-0.8-0.8-1-1-1-ns 1Command Setup Time tCS 1.5- 1.5- 1.5-2-2-2-ns 1Command Hold TimetCH 0.8-0.8-0.8-1-1-1-ns 1CLK to Data Output in Low-Z Time tOLZ1-1-1-1-1-1-ns CLK to Data Output in High-Z TimeCASLatency =3tOHZ3 2.7 5.4 2.7 5.4 2.7 5.4363636ns CAS Latency =2tOHZ2 2.75.42.75.436363636nsAC CHARACTERISTICS IINote :1. A new command can be given tRRC after self refresh exitParameterSymbol-6-K-H-8-P-SUnitNoteMinMax Min Max Min Max Min Max Min Max Min Max RAS Cycle TimeOperationtRC60-60-65-68-70-70-nsAuto RefreshtRRC 60-60-65-68-70-70-ns RAS to CAS Delay tRCD 18-15-20-20-20-20-ns RAS Active Time tRAS 42100K 45100K 45100K 48100K 50100K 50100K ns RAS Precharge TimetRP 18-15-20-20-20-20-ns RAS to RAS Bank Active Delay tRRD 12-15-15-16-20-20-ns CAS to CAS DelaytCCD 1-1-1-1-1-1-CLK Write Command to Data-In Delay tWTL 0-0-0-0-0-0-CLK Write Recovery Time tWR 2-2-2-2-2-2-CLK Data-In to Active Command tDAL 5-5-5-5-5-5-CLK DQM to Data-Out Hi-Z tDQZ 2-2-2-2-2-2-CLK DQM to Data-In Mask tDQM 0-0-0-0-0-0-CLK MRS to New Command tMRD2-2-2-2-2-2-CLK Precharge to Data Output Hi-ZCAS Latency =3tPROZ33-3-3-3-3-3-CLK CAS Latency =2tPROZ22-2-2-2-2-2-CLK Power Down Exit Time tPDE 1-1-1-1-1-1-CLK Self Refresh Exit Time tSRE 1-1-1-1-1-1-CLK 1Refresh TimetREF-64-64-64-64-64-64msIBIS SPECIFICATIONI OH Characteristics (Pull-up)I OL Characteristics (Pull-down)Voltage 100MHz (Min)100MHz (Max)66MHz (Min)(V)I(mA)I(mA)I(mA)3.45-2.43.3-27.33.00-74.1-0.72.6-21.1-129.2-7.52.4-34.1-153.3-13.32.0-58.7-197-27.51.8-67.3-226.2-35.51.65-73-248-41.11.5-77.9-269.7-47.91.4-80.8-284.3-52.41.0-88.6-344.5-72.50-93-502.4-93Voltage 100MHz (Min)100MHz (Max)66MHz (Min)(V)I(mA)I(mA)I(mA)00000.427.570.217.70.6541.8107.526.90.8551.6133.833.31.058.0151.237.61.470.7187.746.61.572.9194.448.01.6575.4202.549.51.877.0208.650.71.9577.6212.051.53.080.3219.654.23.4581.4222.654.9DEVICE OPERATING OPTION TABLEHY57V561620C(L)T-6HY57V561620C(L)T-KHY57V561620C(L)T-HHY57V561620C(L)T-8HY57V561620C(L)T-PHY57V561620C(L)T-SCAS LatencytRCD tRAS tRC tRP tAC tOH 166MHz(6ns)3CLKs 3CLKs 7CLKs 10CLKs 3CLKs 5.4ns 2.7ns 143MHz(7ns)3CLKs 3CLKs 6CLKs 9CLKs 3CLKs 5.4ns 2.7ns 133MHz(7.5ns)2CLKs3CLKs6CLKs9CLKs3CLKs5.4ns2.7nsCAS LatencytRCD tRAS tRC tRP tAC tOH 133MHz(7.5ns)2CLKs 2CLKs 6CLKs 8CLKs 2CLKs 5.4ns 2.7ns 125MHz(8ns)3CLKs 3CLKs 6CLKs 9CLKs 3CLKs 6ns 3ns 100MHz(10ns)2CLKs2CLKs5CLKs7CLKs2CLKs6ns3nsCAS LatencytRCD tRAS tRC tRP tAC tOH 133MHz(7.5ns)3CLKs 3CLKs 6CLKs 9CLKs 3CLKs 5.4ns 2.7ns 125MHz(8ns)3CLKs 3CLKs 6CLKs 9CLKs 3CLKs 6ns 3ns 100MHz(10ns)2CLKs2CLKs5CLKs7CLKs2CLKs6ns3nsCAS LatencytRCD tRAS tRC tRP tAC tOH 125MHz(8ns)3CLKs 3CLKs 6CLKs 9CLKs 3CLKs 6ns 3ns 100MHz(10ns)2CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 83MHz(12ns)2CLKs2CLKs4CLKs6CLKs2CLKs6ns3nsCAS LatencytRCD tRAS tRC tRP tAC tOH 100MHz(10ns)2CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 83MHz(12ns)2CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 66MHz(15ns)2CLKs2CLKs4CLKs6CLKs2CLKs6ns3nsCAS LatencytRCD tRAS tRC tRP tAC tOH 100MHz(10ns)3CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 83MHz(12ns)2CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 66MHz(15ns)2CLKs2CLKs4CLKs6CLKs2CLKs6ns3nsCOMMAND TRUTH TABLENote :1. Exiting Self Refresh occurs by asynchronously bringing CKE from low to high2. X = Don ′t care, H = Logic High, L = Logic Low. BA =Bank Address, RA = Row Address, CA = Column Address, Opcode = Operand Code, NOP = No OperationCommandCKEn-1CKEn CS RAS CAS WE DQM ADDRA10/AP BA NoteMode Register Set H X L L L L XOP codeNo Operation H XHXXXXXLH H H Bank Active HXLLHHXRAVReadHXLHLHXCALV Read with Autoprecharge H WriteHXLHLLXCALVWrite with Autoprecharge H Precharge All BanksHXLLHLXXHXPrecharge selected Bank L VBurst Stop H XLH HLX X DQM H X V X Auto Refresh H H L L L H X XBurst-Read-Single-WRITEH X L L L H X A9 Pin High(Other Pins OP code)Self Refresh 1EntryH L L L L H XXExitLHHXXXXL H H H Precharge power downEntryHLHXXXXXL H H HExitLHHXXXXL H H H Clock SuspendEntry H LHXXXXXLVVVExitLHXXPACKAGE INFORMATION400mil 54pin Thin Small Outline Package。

箱变点表

[PT]//英文名=中文名，组使能，接线方式，通道A相，通道B相，通道C相，通道单相，变比，毛刺刷新时间,高低压PT0=自闭高压母线,1,0,0,1,2,255,100/100,300,1PT1=贯通高压母线,1,0,18,19,20,255,100/100,300,1PT2=自闭低压母线,1,0,36,37,38,255,0/380,300,0PT3=贯通低压母线,1,0,54,55,56,255,0/380,300,0PT4=预留,0,0,72,73,74,255,0/380,300,0PT5=PT6,0,0,0,0,0,0,0/0,0,0PT6=PT7,0,0,0,0,0,0,0/0,0,0PT7=PT8,0,0,0,0,0,0,0/0,0,0[CT]//英文名=中文名，组使能，对应PT组，功率计算，通道A相，通道B相，通道C相，通道单相，变比，毛刺刷新时间,高低压CT0=自闭高压进线,1,0,0,3,4,5,255,30/5,300,1CT1=自闭低压进线,1,2,0,6,7,8,255,150/5,300,0CT2=通信信号电源主,1,2,0,9,10,11,255,100/5,300,0CT3=信号主电源主,1,2,0,12,13,14,255,75/5,300,0CT4=自闭高压出线,1,0,0,15,16,17,255,30/5,300,1CT5=贯通高压进线,1,1,0,21,22,23,255,30/5,300,1CT6=贯通低压进线,1,3,0,24,25,26,255,150/5,300,0CT7=通信信号电源备,1,3,0,27,28,29,255,100/5,300,0CT8=信号备电源主,1,3,0,30,31,32,255,75/5,300,0CT9=贯通高压出线,1,1,0,33,34,35,255,30/5,300,1CT10=信号主电源备,1,2,0,39,40,41,255,75/5,300,0CT11=空调备电源,1,2,0,42,43,44,255,100/5,300,0CT12=自闭备用开关,1,2,0,45,46,47,255,75/5,300,0CT13=通信主电源主,1,2,0,48,255,255,255,40/5,300,0CT14=通信主电源备,1,2,0,49,255,255,255,40/5,300,0CT15=信号备用电源备,1,3,0,57,58,59,255,75/5,300,0CT16=空调主电源,1,3,0,60,61,62,255,100/5,300,0CT17=贯通备用开关,1,3,0,63,64,65,255,75/5,300,0CT18=通信备用电源主,1,3,0,66,255,255,255,40/5,300,0CT19=通信备用电源备,1,3,0,67,255,255,255,40/5,300,0CT20=DMIS主电源,1,2,0,50,255,255,255,40/5,300,0CT21=TMIS主电源,1,2,0,51,255,255,255,40/5,300,0CT22=消防主电源,1,2,0,52,255,255,255,40/5,300,0CT23=DMIS备电源,1,3,0,68,255,255,255,40/5,300,0CT24=TMIS备电源,1,3,0,69,255,255,255,40/5,300,0CT25=消防备电源,1,3,0,70,255,255,255,40/5,300,0CT26=预留,1,4,0,255,85,255,255,40/5,300,0CT27=预留,1,4,0,255,86,255,255,40/5,300,0CT28=预留,1,4,0,255,87,255,255,40/5,300,0CT29=预留,1,4,0,255,88,255,255,40/5,300,0CT30=预留,1,4,0,255,89,255,255,40/5,300,0[YX]//英文名=中文名，开合定义，防抖动时间，遥信类型，辅助信号点，相关控制点，出口延时YX0=自闭高压进线合位,0,32,0,65535,0,2000YX1=自闭高压进线分位,0,32,0,65535,255,2000YX2=自闭高压进线远方,0,32,0,65535,255,2000YX3=自闭高压进线接地,0,32,0,65535,255,2000YX4=自闭变压器合位,0,32,0,65535,1,2000YX5=自闭变压器分位,0,32,0,65535,255,2000YX6=自闭变压器远方,0,32,0,65535,255,2000YX7=自闭变压器接地,0,32,0,65535,255,2000YX8=自闭变压器熔断,0,32,0,65535,255,2000YX9=自闭主进隔离合位,0,32,0,65535,255,2000YX10=自闭主进隔离分位,0,32,0,65535,255,2000YX11=自闭低压进线合位,0,32,0,65535,2,2000YX12=自闭低压进线分位,0,32,0,65535,255,2000YX13=自闭低压进线远方,0,32,0,65535,255,2000YX14=预留,0,32,0,65535,255,2000YX15=通信信号电源主合位,0,32,0,65535,3,2000YX16=通信信号电源主分位,0,32,0,65535,255,2000YX17=通信信号电源主远方,0,32,0,65535,255,2000YX18=通信信号电源主故障,0,32,0,65535,255,2000YX19=信号主电源主合位,0,32,0,65535,4,2000YX20=信号主电源主分位,0,32,0,65535,255,2000YX21=信号主电源主远方,0,32,0,65535,255,2000YX22=预留,0,32,0,65535,255,2000YX23=预留,0,32,0,65535,255,2000YX24=预留,0,32,0,65535,255,2000YX25=预留,0,32,0,65535,255,2000YX26=预留,0,32,0,65535,255,2000YX27=预留,0,32,0,65535,255,2000YX28=预留,0,32,0,65535,255,2000YX29=自闭气压报警信号,0,32,0,65535,255,2000YX30=贯通气压报警信号,0,32,0,65535,255,2000YX31=预留,0,32,0,65535,255,2000YX32=贯通高压进线合位,0,32,0,65535,6,2000YX33=贯通高压进线分位,0,32,0,65535,255,2000YX34=贯通高压进线远方,0,32,0,65535,255,2000YX35=贯通高压进线接地,0,32,0,65535,255,2000YX36=贯通变压器合位,0,32,0,65535,7,2000YX37=贯通变压器分位,0,32,0,65535,255,2000YX38=贯通变压器远方,0,32,0,65535,255,2000YX39=贯通变压器接地,0,32,0,65535,255,2000YX40=贯通变压器熔断,0,32,0,65535,255,2000YX41=贯通主进隔离合位,0,32,0,65535,255,2000YX42=贯通主进隔离分位,0,32,0,65535,255,2000 YX43=贯通低压进线合位,0,32,0,65535,8,2000YX44=贯通低压进线分位,0,32,0,65535,255,2000 YX45=贯通低压进线远方,0,32,0,65535,255,2000 YX46=预留,0,32,0,65535,255,2000YX47=通信信号电源备合位,0,32,0,65535,9,2000 YX48=通信信号电源备分位,0,32,0,65535,255,2000 YX49=通信信号电源备远方,0,32,0,65535,255,2000 YX50=通信信号电源备故障,0,32,0,65535,255,2000 YX51=信号备电源主合位,0,32,0,65535,10,2000 YX52=信号备电源主分位,0,32,0,65535,255,2000 YX53=信号备电源主远方,0,32,0,65535,255,2000 YX54=预留,0,32,0,65535,255,2000YX55=预留,0,32,0,65535,255,2000YX56=预留,0,32,0,65535,255,2000YX57=预留,0,32,0,65535,255,2000YX58=预留,0,32,0,65535,255,2000YX59=预留,0,32,0,65535,255,2000YX60=预留,0,32,0,65535,255,2000YX61=预留,0,32,0,65535,255,2000YX62=预留,0,32,0,65535,255,2000YX63=预留,0,32,0,65535,255,2000YX64=信号主电源备合位,0,32,0,65535,12,2000 YX65=信号主电源备分位,0,32,0,65535,255,2000 YX66=信号主电源备远方,0,32,0,65535,255,2000 YX67=预留,0,32,0,65535,255,2000YX68=通信主电源主合位,0,32,0,65535,13,2000 YX69=通信主电源主分位,0,32,0,65535,255,2000 YX70=通信主电源主远方,0,32,0,65535,255,2000 YX71=预留,0,32,0,65535,255,2000YX72=通信主电源备合位,0,32,0,65535,14,2000 YX73=通信主电源备分位,0,32,0,65535,255,2000 YX74=通信主电源备远方,0,32,0,65535,255,2000 YX75=预留,0,32,0,65535,255,2000YX76=预留,0,32,0,65535,255,2000YX77=预留,0,32,0,65535,255,2000YX78=预留,0,32,0,65535,255,2000YX79=预留,0,32,0,65535,255,2000YX80=预留,0,32,0,65535,255,2000YX81=预留,0,32,0,65535,255,2000YX82=预留,0,32,0,65535,255,2000YX83=预留,0,32,0,65535,255,2000YX84=预留,0,32,0,65535,255,2000YX85=预留,0,32,0,65535,255,2000YX86=预留,0,32,0,65535,255,2000YX87=预留,0,32,0,65535,255,2000YX88=预留,0,32,0,65535,255,2000YX89=预留,0,32,0,65535,255,2000YX90=预留,0,32,0,65535,255,2000YX91=预留,0,32,0,65535,255,2000YX92=双切主用电源合位,0,32,0,65535,255,2000 YX93=双切主用电源分位,0,32,0,65535,255,2000 YX94=双切备用电源合位,0,32,0,65535,255,2000 YX95=双切备用电源分位,0,32,0,65535,255,2000 YX96=信号备电源备合位,0,32,0,65535,18,2000 YX97=信号备电源备分位,0,32,0,65535,255,2000 YX98=信号备电源备远方,0,32,0,65535,255,2000 YX99=预留,0,32,0,65535,255,2000YX100=通信备电源主合位,0,32,0,65535,19,2000 YX101=通信备电源主分位,0,32,0,65535,255,2000 YX102=通信备电源主远方,0,32,0,65535,255,2000 YX103=预留,0,32,0,65535,255,2000YX104=通信备电源备合位,0,32,0,65535,20,2000 YX105=通信备电源备分位,0,32,0,65535,255,2000 YX106=通信备电源备远方,0,32,0,65535,255,2000 YX107=预留,0,32,0,65535,255,2000YX108=预留,0,32,0,65535,255,2000YX109=预留,0,32,0,65535,255,2000YX110=预留,0,32,0,65535,255,2000YX111=预留,0,32,0,65535,255,2000YX112=预留,0,32,0,65535,255,2000YX113=预留,0,32,0,65535,255,2000YX114=预留,0,32,0,65535,255,2000YX115=预留,0,32,0,65535,255,2000YX116=预留,0,32,0,65535,255,2000YX117=预留,0,32,0,65535,255,2000YX118=预留,0,32,0,65535,255,2000YX119=凝露报警,0,32,0,65535,255,2000YX120=超温报警,0,32,0,65535,255,2000YX121=开门报警,0,32,0,65535,255,2000YX122=低压室烟感,0,32,0,65535,255,2000YX123=贯通变压器室烟感,0,32,0,65535,255,2000 YX124=贯通高压室烟感,0,32,0,65535,255,2000 YX125=自闭高压室烟感,0,32,0,65535,255,2000 YX126=自闭变压器室烟感,0,32,0,65535,255,2000 YX127=风机启动,0,32,0,65535,255,2000[IL]//变比=毛刺区，YC死区10/5=100,2015/5=150,3020/5=200,4030/5=300,6040/5=400,8050/5=500,10060/5=600,12075/5=750,15080/5=800,16100/5=1000,20150/5=1500,30200/5=2000,40[IH]//变比=毛刺死区，YC死区10/5=100,2030/5=300,6040/5=400,8050/5=500,100[UL]//变比=毛刺死区，YC死区0/380=100,50[UH]//变比=毛刺死区，YC死区100/100=5,25[YC]YC90=通道1与0夹角YC91=通道2与0夹角YC92=通道3与0夹角YC93=通道4与0夹角YC94=通道5与0夹角YC95=通道6与0夹角YC96=通道7与0夹角YC97=通道8与0夹角YC98=通道9与0夹角YC99=通道10与0夹角YC100=通道11与0夹角YC101=通道12与0夹角YC102=通道13与0夹角YC103=通道14与0夹角YC104=通道15与0夹角YC105=通道16与0夹角YC106=通道17与0夹角YC107=通道18与0夹角YC108=通道19与0夹角YC109=通道20与0夹角YC110=通道21与0夹角YC111=通道22与0夹角YC113=通道24与0夹角YC114=通道25与0夹角YC115=通道26与0夹角YC116=通道27与0夹角YC117=通道28与0夹角YC118=通道29与0夹角YC119=通道30与0夹角YC120=通道31与0夹角YC121=通道32与0夹角YC122=通道33与0夹角YC123=通道34与0夹角YC124=通道35与0夹角YC125=通道36与0夹角YC126=通道37与0夹角YC127=通道38与0夹角YC128=通道39与0夹角YC129=通道40与0夹角YC130=通道41与0夹角YC131=通道42与0夹角YC132=通道43与0夹角YC133=通道44与0夹角YC134=通道45与0夹角YC135=通道46与0夹角YC136=通道47与0夹角YC137=通道48与0夹角YC138=通道49与0夹角YC139=通道50与0夹角YC140=通道51与0夹角YC141=通道52与0夹角YC142=通道53与0夹角YC143=通道54与0夹角YC144=通道55与0夹角YC145=通道56与0夹角YC146=通道57与0夹角YC147=通道58与0夹角YC148=通道59与0夹角YC149=通道60与0夹角YC150=通道61与0夹角YC151=通道62与0夹角YC152=通道63与0夹角YC153=通道64与0夹角YC154=通道65与0夹角YC155=通道66与0夹角YC157=通道68与0夹角YC158=通道69与0夹角YC159=通道70与0夹角YC160=通道71与0夹角YC161=通道72与0夹角YC162=通道73与0夹角YC163=通道74与0夹角YC164=通道75与0夹角YC165=通道76与0夹角YC166=通道77与0夹角YC167=通道78与0夹角YC168=通道79与0夹角YC169=通道80与0夹角YC170=通道81与0夹角YC171=通道82与0夹角YC172=通道83与0夹角YC173=通道84与0夹角YC174=通道85与0夹角YC175=通道86与0夹角YC176=通道87与0夹角YC177=通道88与0夹角YC178=通道89与0夹角YC179=通道90与0夹角YC180=一级负荷系统频率YC181=综合负荷系统频率YC182=VCCYC183=VDDYC184=TempYC185=电池电压YC186=备用YC187=备用YC188=备用YC189=备用YC190=PT0UabYC191=PT0UbcYC192=PT0UcaYC193=PT0U0YC194=PT0U2YC195=PT1UabYC196=PT1UbcYC197=PT1UcaYC198=PT1U0YC199=PT1U2YC201=PT2Ubc YC202=PT2Uca YC203=PT2U0 YC204=PT2U2 YC205=PT3Uab YC206=PT3Ubc YC207=PT3Uca YC208=PT3U0 YC209=PT3U2 YC210=PT4Uab YC211=PT4Ubc YC212=PT4Uca YC213=PT4U0 YC214=PT4U2 YC215=PT5Uab YC216=PT5Ubc YC217=PT5Uca YC218=PT5U0 YC219=PT5U2 YC220=PT6Uab YC221=PT6Ubc YC222=PT6Uca YC223=PT6U0 YC224=PT6U2 YC225=PT7Uab YC226=PT7Ubc YC227=PT7Uca YC228=PT7U0 YC229=PT7U2 YC230=CT0I0 YC231=CT0I2 YC232=CT0P YC233=CT0Q YC234=CT0cos YC235=CT1I0 YC236=CT1I2 YC237=CT1P YC238=CT1Q YC239=CT1cos YC240=CT2I0 YC241=CT2I2 YC242=CT2P YC243=CT2QYC245=CT3I0 YC246=CT3I2 YC247=CT3P YC248=CT3Q YC249=CT3cos YC250=CT4I0 YC251=CT4I2 YC252=CT4P YC253=CT4Q YC254=CT4cos YC255=CT5I0 YC256=CT5I2 YC257=CT5P YC258=CT5Q YC259=CT5cos YC260=CT6I0 YC261=CT6I2 YC262=CT6P YC263=CT6Q YC264=CT6cos YC265=CT7I0 YC266=CT7I2 YC267=CT7P YC268=CT7Q YC269=CT7cos YC270=CT8I0 YC271=CT8I2 YC272=CT8P YC273=CT8Q YC274=CT8cos YC275=CT9I0 YC276=CT9I2 YC277=CT9P YC278=CT9Q YC279=CT9cos YC280=CT10I0 YC281=CT10I2 YC282=CT10P YC283=CT10Q YC284=CT10cos YC285=CT11I0 YC286=CT11I2 YC287=CT11PYC289=CT11cos YC290=CT12I0 YC291=CT12I2 YC292=CT12P YC293=CT12Q YC294=CT12cos YC295=CT13I0 YC296=CT13I2 YC297=CT13P YC298=CT13Q YC299=CT13cos YC300=CT14I0 YC301=CT14I2 YC302=CT14P YC303=CT14Q YC304=CT14cos YC305=CT15I0 YC306=CT15I2 YC307=CT15P YC308=CT15Q YC309=CT15cos YC310=CT16I0 YC311=CT16I2 YC312=CT16P YC313=CT16Q YC314=CT16cos YC315=CT17I0 YC316=CT17I2 YC317=CT17P YC318=CT17Q YC319=CT17cos YC320=CT18I0 YC321=CT18I2 YC322=CT18P YC323=CT18Q YC324=CT18cos YC325=CT19I0 YC326=CT19I2 YC327=CT19P YC328=CT19Q YC329=CT19cos YC330=CT20I0 YC331=CT20I2YC332=CT20PYC333=CT20QYC334=CT20cos[INFOM]YC=16385YX=1YK=24577[PTDW]//英文名=单位PT0=KVPT1=KVPT2=VPT3=VPT4=VPT5=VPT6=VPT7=V[CTDW]//英文名=单位,数量CT0=A,31[ILDOT]//变比=小数点10/5=0.0115/5=0.0120/5=0.0130/5=0.0140/5=0.0150/5=0.0160/5=0.0175/5=0.0180/5=0.1100/5=0.1150/5=0.1200/5=0.1[IHDOT]//变比=小数点10/5=0.0130/5=0.0140/5=0.0150/5=0.01[ULDOT]//变比=小数点,额定值0/380=0.1,220[UHDOT]//变比=小数点100/100=0.01,5.8[YCDW]//英文名=单位,小数点YC90=度,0.1YC91=度,0.1YC92=度,0.1YC93=度,0.1YC94=度,0.1YC95=度,0.1YC96=度,0.1YC97=度,0.1YC98=度,0.1YC99=度,0.1YC100=度,0.1YC101=度,0.1YC102=度,0.1YC103=度,0.1YC104=度,0.1YC105=度,0.1YC106=度,0.1YC107=度,0.1YC108=度,0.1YC109=度,0.1YC110=度,0.1YC111=度,0.1YC112=度,0.1YC113=度,0.1YC114=度,0.1YC115=度,0.1YC116=度,0.1YC117=度,0.1YC118=度,0.1YC119=度,0.1YC120=度,0.1YC121=度,0.1YC122=度,0.1YC123=度,0.1YC124=度,0.1YC125=度,0.1YC126=度,0.1YC127=度,0.1YC128=度,0.1YC130=度,0.1 YC131=度,0.1 YC132=度,0.1 YC133=度,0.1 YC134=度,0.1 YC135=度,0.1 YC136=度,0.1 YC137=度,0.1 YC138=度,0.1 YC139=度,0.1 YC140=度,0.1 YC141=度,0.1 YC142=度,0.1 YC143=度,0.1 YC144=度,0.1 YC145=度,0.1 YC146=度,0.1 YC147=度,0.1 YC148=度,0.1 YC149=度,0.1 YC150=度,0.1 YC151=度,0.1 YC152=度,0.1 YC153=度,0.1 YC154=度,0.1 YC155=度,0.1 YC156=度,0.1 YC157=度,0.1 YC158=度,0.1 YC159=度,0.1 YC160=度,0.1 YC161=度,0.1 YC162=度,0.1 YC163=度,0.1 YC164=度,0.1 YC165=度,0.1 YC166=度,0.1 YC167=度,0.1 YC168=度,0.1 YC169=度,0.1 YC170=度,0.1 YC171=度,0.1 YC172=度,0.1YC174=度,0.1 YC175=度,0.1 YC176=度,0.1 YC177=度,0.1 YC178=度,0.1 YC179=度,0.1 YC180=HZ,0.01 YC181=HZ,0.01 YC182=V,0.01 YC183=V,0.01 YC184=度,0.1 YC185=V,0.01 YC186=#,255 YC187=#,255 YC188=#,255 YC189=#,255 YC190=KV,0.01 YC191=KV,0.01 YC192=KV,0.01 YC193=V,0.01 YC194=V,0.01 YC195=KV,0.01 YC196=KV,0.01 YC197=KV,0.01 YC198=V,0.01 YC199=V,0.01 YC200=V,0.1 YC201=V,0.1 YC202=V,0.1 YC203=V,0.1 YC204=V,0.1 YC205=V,0.1 YC206=V,0.1 YC207=V,0.1 YC208=V,0.1 YC209=V,0.1 YC210=KV,0.1 YC211=KV,0.1 YC212=KV,0.1 YC213=V,0.1 YC214=V,0.1 YC215=KV,0.1 YC216=KV,0.1YC218=V,0.1 YC219=V,0.1 YC220=KV,0.1 YC221=KV,0.1 YC222=KV,0.1 YC223=V,0.1 YC224=V,0.1 YC225=KV,0.1 YC226=KV,0.1 YC227=KV,0.1 YC228=V,0.1 YC229=V,0.1 YC230=A,0.01 YC231=A,0.01 YC232=KW,255 YC233=KW,255 YC234=#,0.001 YC235=A,0.01 YC236=A,0.01 YC237=KW,255 YC238=KW,255 YC239=#,0.001 YC240=A,0.01 YC241=A,0.01 YC242=KW,255 YC243=KW,255 YC244=#,0.001 YC245=A,0.01 YC246=A,0.01 YC247=KW,255 YC248=KW,255 YC249=#,0.001 YC250=A,0.01 YC251=A,0.01 YC252=KW,255 YC253=KW,255 YC254=#,0.001 YC255=A,0.01 YC256=A,0.01 YC257=KW,255 YC258=KW,255 YC259=#,0.001 YC260=A,0.01YC262=KW,255 YC263=KW,255 YC264=#,0.001 YC265=A,0.01 YC266=A,0.01 YC267=KW,255 YC268=KW,255 YC269=#,0.001 YC270=A,0.01 YC271=A,0.01 YC272=KW,255 YC273=KW,255 YC274=#,0.001 YC275=A,0.01 YC276=A,0.01 YC277=KW,255 YC278=KW,255 YC279=#,0.001 YC280=A,0.01 YC281=A,0.01 YC282=KW,255 YC283=KW,255 YC284=#,0.001 YC285=A,0.01 YC286=A,0.01 YC287=KW,255 YC288=KW,255 YC289=#,0.001 YC290=A,0.01 YC291=A,0.01 YC292=KW,255 YC293=KW,255 YC294=#,0.001 YC295=A,0.01 YC296=A,0.01 YC297=KW,255 YC298=KW,255 YC299=#,0.001 YC300=A,0.01 YC301=A,0.01 YC302=KW,255 YC303=KW,255 YC304=#,0.001YC306=A,0.01YC307=KW,255YC308=KW,255YC309=#,0.001YC310=A,0.01YC311=A,0.01YC312=KW,255YC313=KW,255YC314=#,0.001YC315=A,0.01YC316=A,0.01YC317=KW,255YC318=KW,255YC319=#,0.001YC320=A,0.01YC321=A,0.01YC322=KW,255YC323=KW,255YC324=#,0.001YC325=A,0.01YC326=A,0.01YC327=KW,255YC328=KW,255YC329=#,0.001YC330=A,0.01YC331=A,0.01YC332=KW,255YC333=KW,255YC334=#,0.001[XYX]//英文名=中文名,组数,0状态,1状态YX256=遥控返校点,0,复归,发信YX257~304=遥控0~47挂摘牌,1,摘牌,挂牌YX305=录波发信,1,复归,发信YX306=装置参数异常,1,复归,发信YX307=硬件配置异常,1,复归,发信YX308=继电器故障,1,复归,发信YX309=预留,1,复归,发信YX310=PT0过压报警,1,复归,发信YX311=PT0低压报警,1,复归,发信YX312=PT0失压报警,1,复归,发信YX313=PT0有压合闸,1,复归,发信YX314=PT0零序过压,1,复归,发信YX315=PT0缺相报警,1,复归,发信YX316=PT0相序异常报警,1,复归,发信YX317=PT0断线报警,1,复归,发信YX318=备用,1,复归,发信YX319=备用,1,复归,发信YX320=备用,1,复归,发信YX321=备用,1,复归,发信YX322~405=YX310~321,7,复归,发信YX406=CT0过流动作,1,复归,发信YX407=CT0重合闸,1,复归,发信YX408=CT0后加速动作,1,复归,发信YX409=CT0零序过流动作,1,复归,发信YX410=CT0断线报警,1,复归,发信YX411=CT0接地故障报警,1,复归,发信YX412=备用,1,复归,发信YX413=备用,1,复归,发信YX414~661=YX406~413,31,复归,发信[YXZT]//英文名=0状态,1状态YX0=分,合YX1=分,合YX2=就地,远方YX3=分,合YX4=分,合YX5=分,合YX6=就地,远方YX7=分,合YX8=熔断,正常YX9=分,合YX10=分,合YX11=分,合YX12=分,合YX13=就地,远方YX14=分,合YX15=分,合YX16=分,合YX17=就地,远方YX18=发信,复归YX19=分,合YX20=分,合YX21=就地,远方YX22=分,合YX23=分,合YX24=分,合YX25=就地,远方YX26=分,合YX27=分,合YX28=分,合YX29=发信,复归YX30=发信,复归YX31=分,合YX32=分,合YX33=分,合YX34=就地,远方YX35=分,合YX36=分,合YX37=分,合YX38=就地,远方YX39=分,合YX40=熔断,正常YX41=分,合YX42=分,合YX43=分,合YX44=分,合YX45=就地,远方YX46=分,合YX47=分,合YX48=分,合YX49=就地,远方YX50=发信,复归YX51=分,合YX52=分,合YX53=就地,远方YX54=分,合YX55=分,合YX56=分,合YX57=就地,远方YX58=分,合YX59=分,合YX60=分,合YX61=分,合YX62=分,合YX63=分,合YX64=分,合YX65=分,合YX66=就地,远方YX67=分,合YX68=分,合YX69=分,合YX70=就地,远方YX71=分,合YX72=分,合YX73=分,合YX74=就地,远方YX75=分,合YX76=分,合YX77=分,合YX78=分,合YX79=分,合YX80=分,合YX81=分,合YX82=分,合YX83=分,合YX84=分,合YX85=分,合YX86=分,合YX87=分,合YX88=分,合YX89=分,合YX90=分,合YX91=分,合YX92=分,合YX93=分,合YX94=分,合YX95=分,合YX96=分,合YX97=分,合YX98=就地,远方YX99=分,合YX100=分,合YX101=分,合YX102=就地,远方YX103=分,合YX104=分,合YX105=分,合YX106=就地,远方YX107=分,合YX108=分,合YX109=分,合YX110=分,合YX111=分,合YX112=分,合YX113=分,合YX114=分,合YX115=分,合YX116=分,合YX117=分,合YX118=分,合YX119=发信,复归YX120=发信,复归YX121=开门,关门YX122=发信,复归YX123=发信,复归YX124=发信,复归YX125=发信,复归YX126=发信,复归YX127=发信,复归。

PD57060中文资料

PD57060中⽂资料1/12March, 21 2003PD57060PD57060SRF POWER TRANSISTORS The LdmoST Plastic FAMILYN-CHANNEL ENHANCEMENT-MODE LATERAL MOSFETsEXCELLENT THERMAL STABILITY COMMON SOURCE CONFIGURATION P OUT = 60 W with 14.3 dB gain @ 945 MHz / 28V ?NEW RF PLASTIC PACKAGEDESCRIPTIONThe PD57060S is a common source N-Channel,enhancement-mode lateral Field-Effect RF power transistor. It is designed for high gain, broad band commercial and industrial applications. It operates at 28 V in common source mode at frequencies of up to 1 GHz. PD57060S boasts the excellent gain,linearity and reliability of ST’s latest LDMOS technology mounted in the first true SMD plastic RF power package, PowerSO-10RF. PD57060S’s superior linearity performance makes it an ideal solution for base station applications.The PowerSO-10 plastic package, designed to offer high reliability, is the first ST JEDEC approved, high power SMD package. It has been specially optmized for RF needs and offers excellent RF performances and ease of assembly.ABSOLUTE MAXIMUM RATINGS (T CASE = 25 °C)Symbol ParameterValue Unit V (BR)DSS Drain-Source Voltage 65V V GS Gate-Source Voltage ± 20V I D Drain Current7A P DISS Power Dissipation (@ Tc = 70°C)79W Tj Max. Operating Junction Temperature 165°C T STGStorage Temperature-65 to +150°CTHERMAL DATA (T CASE = 70 °C)R th(j-c)Junction -Case Thermal Resistance1.0°C/WMounting recommendations are available in /doc/8816150416.html/rf/ (look for application note AN1294)PD57060 - PD57060S2/12ELECTRICAL SPECIFICATION (T CASE = 25 °C)STATICDYNAMICSymbol Test Conditions Min.Typ.Max.Unit V (BR)DSS V GS = 0 V I DS = 1 mA 65V I DSS V GS = 0 V VDS = 28 V 1µA I GSS V GS = 20 V V DS = 0 V1µA V GS(Q)V DS = 28 V I D = 100 mA2.05.0V V DS(ON)V GS = 10 V I D = 3 A 0.70.8V G FS V DS = 10 V I D = 3 A 2.5mho C ISS V GS = 0 V V DS = 28 V f = 1 MHz 83pF C OSS V GS = 0 V V DS = 28 V f = 1 MHz 58pF C RSSV GS = 0 VV DS = 28 Vf = 1 MHz3pFSymbol Test ConditionsMin.Typ.Max.Unit P OUT V DD = 28 VI DQ = 100 mAf = 945 MHz 60W G P V DD = 28 V I DQ = 100 mA P OUT = 60 W f = 945 MHz 14.3dB ηD V DD = 28 V I DQ = 100 mA P OUT = 60 W f = 945 MHz 54%Load mismatchV DD = 28 V I DQ = 100 mA P OUT = 60 Wf = 945 MHzALL PHASE ANGLES5:1VSWRFREQ.Z IN (?)Z DL (?)890 MHz 0.646 + j 0.694 1.577 - j 0.997925 MHz 0.568 + j 0.372 1.427 - j 1.459945 MHz 0.705 + j 0.692 1.278 - j 1.935960 MHz0.591 + j 1.0391.173 - j2.464Ref. 7143417BPD57060SPD57060 - PD57060S TYPICAL PERFORMANCE (PD57060S)3/12PD57060 - PD57060S4/12TYPICAL PERFORMANCE (PD57060S)PD57060 - PD57060STEST CIRCUIT COMPONENT PART LISTCOMPONENT DESCRIPTIONL1,L2INDUCTOR, 5 TURNS AIR WOUND #22AWG, ID 0.059{1.49}, NYLON COATED MAGNET WIREFB1,FB2SHIELD BEAD SURFACE MOUNT EMIR118 k?, 1 W SURFACE MOUNT CHIP RESISTORR2 4.7 M?, 1 W SURFACE MOUNT CHIP RESISTORR3120 ?, 2 W SURFACE MOUNT CHIP RESISTORC1,C2 3 pF ATC 100B SURFACE MOUNT CERAMIC CHIP CAPACITORC3,C10,C11,C1547 pF ATC 100B SURFACE MOUNT CERAMIC CHIP CAPACITORC4,C90.8-8.0 pF GIGA TRIM VARIABLE CAPACITORC5,C6,C7,C87.5 pF ATC 100B SURFACE MOUNT CERAMIC CHIP CAPACITORC121000 pF ATC 700B SURFACE MOUNT CERAMIC CHIP CAPACITORC13,C170.1 µF, 500 V SURFACE MOUNT CERAMIC CHIP CAPACITORC1410 µF, 50 V ALUMINUM ELECTROLYTIC RADIAL LEAD CAPACITORC16100 pF ATC 100B SURFACE MOUNT CERAMIC CHIP CAPACITORC18220 µF, 63 V ALUMINUM ELECTROLYTIC RADIAL LEAD CAPACITOR BOARD ROGER, ULTRA LAM 2000, THK 0.030”, εr = 2.55 2oz. ED Cu 2 SIDES.5/12PD57060 - PD57060S6/12PD57060 - PD57060S COMMON SOURCE S-PARAMETER(PD57060S)= 28 V I = 1.5 A)(V7/12PD57060 - PD57060SCOMMON SOURCE S-PARAMETER(PD57060S) (V DS = 28 V I D = 2 A)8/12PD57060 - PD57060S COMMON SOURCE S-PARAMETER(PD57060S)(V DS = 13.8 V I D = 2 A)9/12PD57060 - PD57060S10/12PowerSO-10RF Formed Lead (Gull Wing) MECHANICAL DATAmmInch MIN.TYP .MAX MIN.TYP.MAX A100.050.10.0.00190.0038A2 3.4 3.5 3.60.1340.1370.142A3 1.2 1.3 1.40.0460.050.054A40.150.20.250.0050.0070.009a 0.20.007b 5.4 5.53 5.650.2120.2170.221c 0.230.270.320.0080.010.012D 9.49.59.60.3700.3740.377D17.47.57.60.2900.2950.298E13.8514.114.350.5440.5550.565E19.39.49.50.3650.370.375E27.37.47.50.2860.2920.294E3 5.96.1 6.30.2310.240.247F 0.50.019G 1.20.047L 0.81 1.10.0300.0390.042R10.250.01R20.80.031T2 deg 5 deg8 deg2 deg5 deg 8 deg T16 deg 6 deg T210 deg10 degDIM.Note (1): Resin protrusions not included (max value: 0.15 mm per side)11/12PD57060 - PD57060SPowerSO-10RF Straight Lead MECHANICAL DATANote (1): Resin protrusions not included (max value: 0.15 mm per side)mmInch MIN.TYP .MAX MIN.TYP.MAX A1 1.62 1.67 1.720.0640.0650.068A2 3.4 3.5 3.60.1340.1370.142A3 1.2 1.31.40.0460.050.054A40.150.20.250.0050.0070.009a 0.20.007b 5.4 5.53 5.650.2120.2170.221c 0.230.270.320.0080.010.012D 9.49.59.60.3700.3740.377D17.47.57.60.2900.2950.298E15.1515.415.650.5950.6060.615E19.39.49.50.3650.370.375E27.37.47.50.2860.2920.294E3 5.96.1 6.30.2310.240.247F 0.50.019G 1.20.047R10.250.01R20.80.031T1 6 deg 6 deg T210 deg10 degDIM.PD57060 - PD57060SInformation furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.The ST logo is registered trademark of STMicroelectronics2003 STMicroelectronics - All Rights ReservedAll other names are the property of their respective owners.STMicroelectronics GROUP OF COMPANIESAustralia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A./doc/8816150416.html12/12。

CT综合测试仪-带伏安特性说明及型号

CT综合测试仪-带伏安特性说明书青岛华顺电气设备厂概述青岛华顺电气有限公司成立于1998年，专业从事电力仪器仪表开发生产和销售，公司自主开发的系列便携式CT、PT伏安特性.变比.极性综合测试仪。

（现有产品：单功能伏安特性测试仪；手动伏安特性、变比、极性测试仪；全自动伏安特性、变比、极性测试仪）。

全自动互感器综合测试仪，是专门为试验互感器伏安特性﹑5% 和10%的误差曲线、二次侧回路检查、变比和极性判别而设计，仅需设定最高测试电压、电流和步长，装置将自动升压，自动将伏安特性曲线描绘出来，省去手动调压、人工记录、描曲线等繁琐劳动。

快捷、简单、方便。

若单机不能满足测试要求，可外接升压器进行试验。

是一台性能价格比较高的多功能试验仪器。

其性能独特，该仪器目前在国内处于领先水平。

注意事项1. 为了保护人身及设备安全，使用前请详细阅读使用说明书，并严格按说明书要求规范操作。

2. 为保证仪器工作的可靠性，请勿将仪器左右侧的散热孔堵塞。

3. 不要让任何异物掉入机箱内，以免发生短路。

4. 试验之前请将仪器可靠接地。

5. 做CT变比试验时，请将CT二次绕组的接地线断开。

6. 做PT伏安特性时，请将被测PT的一次绕组的零位端接地。

7. 如主机不能与电脑进行通讯时，请检查你的电脑串口是否设置为COM1口。

8. 主机最多可保存45组数据，掉电后数据不丢失。

本公司保留对此说明书修改的权利。

产品与说明书不符之处，以实际产品为准。

若在使用中存在技术问题，请与公司联系。

目录第一章产品主要特点 (3)第二章主要技术参数 (3)1 装置面板结构说明 (4)第三章单机运行软件操作方法 (4)1 旋转鼠标使用方法 (4)2 主菜单 (4)3 CT伏安特性试验 (5)3.1 CT伏安特性试验的软件界面 (5)3.2 CT伏安特性试验方法…………………………………………5….3.3 使用主机单机试验 (6)3.4 使用外部升压器试验 (6)3.5 测试结果操作说明 (7)3.6 误差曲线 (8)3.7 查阅以前所保存的测试数据 (8)4.0 CT 变比极性试验 (8)4.1 CT 变比极性试验的软件界面…………………………………8…4.2 CT 变比试验接线 (8)4.3 CT变比试验方法 (9)4.4 CT二次侧回路检查 (9)4.5 PT伏安特性试验方法 (9)4.6 PT变比极性试验方法 (10)4.7 交流耐压测试方法 (10)5 PC 机操作软件使用说明………………………………………11…..附录1 故障维护 (12)附录2 如何更换打印纸 (13)附录3 售后服务承诺 (13)第一章：HS-8A+ 全自动互感器特性综合测试仪主要特点1.仅需设定测试电压、电流和步长，装置将自动升压并能自动将伏安特性测试曲线描绘出来，省去手动调压、人工记录、描曲线等烦琐劳动。

HY57V56820CLT-6中文资料

4 Banks x 8M x 8Bit Synchronous DRAMThis document is a general product description and is subject to change without notice. Hyundai Electronics does not assume any responsibility for use of DESCRIPTIONThe HY57V56820C is a 268,435,456bit CMOS Synchronous DRAM, ideally suited for the main memory applications which require large memory density and high bandwidth. The HY57V56820C is organized as 4banks of 8,388,608x8.The HY57V56820C is offering fully synchronous operation referenced to a positive edge of the clock. All inputs and outputs are synchro-nized with the rising edge of the clock input. The data paths are internally pipelined to achieve very high bandwidth. All input and output voltage levels are compatible with LVTTL.Programmable options include the length of pipeline (Read latency of 2 or 3), the number of consecutive read or write cycles initiated by a single control command (Burst length of 1,2,4,8 or full page), and the burst count sequence(sequential or interleave). A burst of read or write cycles in progress can be terminated by a burst terminate command or can be interrupted and replaced by a new burst read or write command on any cycle. (This pipelined design is not restricted by a `2N` rule.)FEATURES•Single 3.3±0.3V power supply•All device pins are compatible with LVTTL interface •JEDEC standard 400mil 54pin TSOP-II with 0.8mm of pin pitch•All inputs and outputs referenced to positive edge of system clock•Data mask function by DQM •Internal four banks operation•Auto refresh and self refresh •8192 refresh cycles / 64ms•Programmable Burst Length and Burst Type - 1, 2, 4, 8 or Full page for Sequential Burst- 1, 2, 4 or 8 for Interleave Burst•Programmable CAS Latency ; 2, 3 ClocksORDERING INFORMATIONPart No.Clock FrequencyPower Organization Interface PackageHY57V56820CT-6166MHz Normal4Banks x 8Mbits x8LVTTL 400mil 54pin TSOP IIHY57V56820CT-K 133MHz HY57V56820CT-H 133MHz HY57V56820CT-8125MHz HY57V56820CT-P 100MHz HY57V56820CT-S 100MHz HY57V56820CLT-6166MHz Low powerHY57V56820CLT-K 133MHz HY57V56820CLT-H 133MHz HY57V56820CLT-8125MHz HY57V56820CLT-P 100MHz HY57V56820CLT-S100MHzPIN DESCRIPTIONPIN PIN NAME DESCRIPTIONCLK Clock The system clock input. All other inputs are registered to the SDRAM on the rising edge of CLKCKE Clock Enable Controls internal clock signal and when deactivated, the SDRAM will be one of the states among power down, suspend or self refreshCS Chip Select Enables or disables all inputs except CLK, CKE and DQMBA0, BA1Bank Address Selects bank to be activated during RAS activity Selects bank to be read/written during CAS activityA0 ~ A12Address Row Address : RA0 ~ RA12, Column Address : CA0 ~ CA9 Auto-precharge flag : A10RAS, CAS, WE Row Address Strobe,Column Address Strobe,Write EnableRAS, CAS and WE define the operationRefer function truth table for detailsDQM Data Input/Output Mask Controls output buffers in read mode and masks input data in write mode DQ0 ~ DQ7Data Input/Output Multiplexed data input / output pinV DD/V SS Power Supply/Ground Power supply for internal circuits and input buffersV DDQ/V SSQ Data Output Power/Ground Power supply for output buffersNC No Connection No connectionFUNCTIONAL BLOCK DIAGRAM 8Mbit x 4banks x 8 I/O Synchronous DRAMABSOLUTE MAXIMUM RATINGSNote : Operation at above absolute maximum rating can adversely affect device reliabilityDC OPERATING CONDITION (TA=0 to 70°C )Note :1.All voltages are referenced to V SS = 0V2.V IH (max) is acceptable 5.6V AC pulse width with ≤3ns of duration3.V IL (min) is acceptable -2.0V AC pulse width with ≤3ns of durationAC OPERATING CONDITION (TA=0 to 70°C , V DD =3.3 ± 0.3V, V SS =0V)Note :1. Output load to measure access time is equivalent to two TTL gates and one capacitor (50pF) For details, refer to AC/DC output circuitParameterSymbolRatingUnitAmbient Temperature T A 0 ~ 70°C Storage TemperatureT STG -55 ~ 125°CVoltage on Any Pin relative to V SS V IN , V OUT -1.0 ~ 4.6V Voltage on V DD relative to V SS V DD, V DDQ -1.0 ~ 4.6V Short Circuit Output Current I OS 50mA Power DissipationP D 1WSoldering Temperature ⋅ TimeT SOLDER260 ⋅ 10°C ⋅ SecParameterSymbolMinTyp.MaxUnitNotePower Supply Voltage V DD , V DDQ 3.0 3.3 3.6V 1Input High Voltage V IH 2.0 3.0V DD + 0.3V 1,2Input Low VoltageV IL- 0.30.8V1,3ParameterSymbolValueUnitNoteAC Input High / Low Level VoltageV IH / V IL 2.4/0.4V Input Timing Measurement Reference Level Voltage Vtrip 1.4V Input Rise / Fall TimetR / tF 1ns Output Timing Measurement Reference LevelVoutref 1.4V Output Load Capacitance for Access Time MeasurementCL50pF1CAPACITANCE (TA=25°C , f=1MHz)OUTPUT LOAD CIRCUITDC CHARACTERISTICS I (TA=0 to 70°C , V DD =3.3±0.3V)Note :1.V IN = 0 to 3.6V, All other pins are not tested under V IN =0V2.D OUT is disabled, V OUT =0 to3.6VParameterPinSymbol-6/K/H-8/P/SUnitMinMaxMinMax Input capacitance CLKC I1 2.5 3.5 2.5 4.0pF A0 ~ A12, BA0, BA1, CKE, CS, RAS, CAS, WE, UDQM, LDQMCI 2 2.5 3.8 2.5 5.0pF Data input / output capacitance DQ0 ~ DQ15CI/O4.06.54.06.5pFParameterSymbolMin.MaxUnitNoteInput Leakage Current I LI -11uA 1Output Leakage Current I LO -11uA 2Output High Voltage V OH 2.4-V I OH = -4mA Output Low VoltageV OL-0.4VI OL = +4mADC CHARACTERISTICS II (TA=0 to 70°C , V DD =3.3±0.3V, V SS =0V)Note :1.I DD1 and I DD4 depend on output loading and cycle rates. Specified values are measured with the output open2.Min. of tRRC (Refresh RAS cycle time) is shown at AC CHARACTERISTICS II3.HY57V56820CT-6/K/H/8/P/S4.HY57V56820CLT-6/K/H/8/P/SParameterSymbolTest ConditionSpeedUnitNote-6-K -H -8-P -S Operating CurrentI DD1Burst length=1, One bank active t RC ≥ t RC (min), I OL =0mA 130120120120110100mA1Precharge Standby Current in Power Down ModeI DD2P CKE ≤ V IL (max), t CK = 15ns 2.5mAI DD2PS CKE ≤ V IL (max), t CK = ∞2.0Precharge Standby Current in Non Power Down ModeI DD2NCKE ≥ V IH (min), CS ≥ V IH (min), t CK = 15ns Input signals are changed one time during 30ns. All other pins ≥ V DD -0.2V or ≤ 0.2V 35mAI DD2NSCKE ≥ V IH (min), t CK = ∞Input signals are stable.20Active Standby Current in Power Down ModeI DD3P CKE ≤ V IL (max), t CK = 15ns 5.0mAI DD3PS CKE ≤ V IL (max), t CK = ∞5.0Active Standby Current in Non Power Down ModeI DD3NCKE ≥ V IH (min), CS ≥ V IH (min), t CK = 15ns Input signals are changed one time during 30ns. All other pins ≥ V DD -0.2V or ≤ 0.2V 45.0mAI DD3NSCKE ≥ V IH (min), t CK = ∞Input signals are stable.30.0Burst Mode Operating Current I DD4t CK ≥ t CK (min), I OL =0mA All banks activeCL=3150130130130120110mA 1Auto Refresh Current I DD5t RRC ≥ t RRC (min), All banks active 220220220200200200mA 2Self Refresh CurrentI DD6CKE ≤ 0.2V3mA 31.5mA4AC CHARACTERISTICS I (AC operating conditions unless otherwise noted)Note :1.Assume tR / tF (input rise and fall time ) is 1ns2.Access times to be measured with input signals of 1v/ns edge rateParameterSymbol-6-K-H-8-P-SUnitNoteMinMaxMin MaxMin MaxMin MaxMin MaxMin MaxSystem Clock Cycle TimeCAS Latency = 3tCK3610007.510007.5100081000101000101000nsCAS Latency = 2tCK27.57.510101012ns Clock High Pulse Width tCHW 2.5- 2.5- 2.5-3-3-3-ns 1Clock Low Pulse Width tCLW 2.5- 2.5- 2.5-3-3-3-ns 1Access Time FromClockCAS Latency = 3tAC3- 5.4- 5.4- 5.4-6-6-6ns2CAS Latency = 2tAC2-6- 5.4-6-6-6-6ns Data-Out Hold Time tOH 2.7- 2.7- 2.7-3-3-3-ns Data-Input Setup Time tDS 1.5- 1.5- 1.5-2-2-2-ns 1Data-Input Hold Time tDH 0.8-0.8-0.8-1-1-1-ns 1Address Setup Time tAS 1.5- 1.5- 1.5-2-2-2-ns 1Address Hold Time tAH 0.8-0.8-0.8-1-1-1-ns 1CKE Setup Time tCKS 1.5- 1.5- 1.5-2-2-2-ns 1CKE Hold Time tCKH 0.8-0.8-0.8-1-1-1-ns 1Command Setup Time tCS 1.5- 1.5- 1.5-2-2-2-ns 1Command Hold TimetCH 0.8-0.8-0.8-1-1-1-ns 1CLK to Data Output in Low-Z Time tOLZ 1-1-1-1-1-1-ns CLK to Data Output in High-Z TimeCAS Latency =3tOHZ3 2.7 5.4 2.7 5.4 2.7 5.4363636ns CAS Latency = 2tOHZ22.75.42.75.436363636nsAC CHARACTERISTICS IINote :1. A new command can be given tRRC after self refresh exitParameterSymbol-6-K-H-8-P-SUnitNoteMinMax Min Max Min Max Min Max Min Max Min Max RAS Cycle TimeOperationtRC60-60-65-68-70-70-nsAutoRefreshtRRC 60-60-65-68-70-70-ns RAS to CAS Delay tRCD 18-15-20-20-20-20-ns RAS Active Time tRAS 42100K 45100K 45100K 48100K 50100K 50100K ns RAS Precharge TimetRP 18-15-20-20-20-20-ns RAS to RAS Bank Active Delay tRRD 12-15-15-16-20-20-ns CAS to CAS Delay tCCD 1-1-1-1-1-1-CLK Write Command to Data-In Delay tWTL 0-0-0-0-0-0-CLK Write Recovery Time tWR 2-2-2-2-2-2-CLK Data-In to Active Command tDAL 5-5-5-5-5-5-CLK DQM to Data-Out Hi-Z tDQZ 2-2-2-2-2-2-CLK DQM to Data-In Mask tDQM 0-0-0-0-0-0-CLK MRS to New CommandtMRD 2-2-2-2-2-2-CLK Precharge to Data Output Hi-ZCAS Latency =3tPROZ33-3-3-3-3-3-CLK CAS Latency = 2tPROZ22-2-2-2-2-2-CLK Power Down Exit TimetPDE 1-1-1-1-1-1-CLK Self Refresh Exit Time tSRE 1-1-1-1-1-1-CLK 1Refresh TimetREF-64-64-64-64-64-64msIBIS SPECIFICATIONI OH Characteristics (Pull-up)I OL Characteristics (Pull-down)Voltage 100MHz (Min)100MHz (Max)66MHz (Min)(V)I(mA)I(mA)I(mA)3.45-2.43.3-27.33.00-74.1-0.72.6-21.1-129.2-7.52.4-34.1-153.3-13.32.0-58.7-197-27.51.8-67.3-226.2-35.51.65-73-248-41.11.5-77.9-269.7-47.91.4-80.8-284.3-52.41.0-88.6-344.5-72.50-93-502.4-93Voltage 100MHz (Min)100MHz (Max)66MHz (Min)(V)I(mA)I(mA)I(mA)00000.427.570.217.70.6541.8107.526.90.8551.6133.833.31.058.0151.237.61.470.7187.746.61.572.9194.448.01.6575.4202.549.51.877.0208.650.71.9577.6212.051.53.080.3219.654.23.4581.4222.654.9DEVICE OPERATING OPTION TABLEHY57V56820C(L)T-6HY57V56820C(L)T-KHY57V56820C(L)T-HHY57V56820C(L)T-8HY57V56820C(L)T-PHY57V56820C(L)T-SCAS LatencytRCDtRAStRCtRPtACtOH166MHz(6ns)3CLKs 3CLKs 7CLKs 10CLKs 3CLKs 5.4ns 2.7ns 143MHz(7ns)3CLKs 3CLKs 6CLKs 9CLKs 3CLKs 5.4ns 2.7ns 133MHz(7.5ns)2CLKs 3CLKs 6CLKs 9CLKs 3CLKs 5.4ns 2.7nsCAS LatencytRCDtRAStRCtRPtACtOH133MHz(7.5ns)3CLKs 3CLKs 7CLKs 10CLKs 3CLKs 5.4ns 2.7ns 125MHz(8ns)3CLKs 3CLKs 6CLKs 9CLKs 3CLKs 6ns 3ns 100MHz(10ns)2CLKs 2CLKs 6CLKs 9CLKs 3CLKs 6ns 3nsCAS LatencytRCDtRAStRCtRPtACtOH133MHz(7.5ns)2CLKs 2CLKs 6CLKs 8CLKs 2CLKs 5.4ns 2.7ns 125MHz(8ns)3CLKs 3CLKs 6CLKs 9CLKs 3CLKs 6ns 3ns 100MHz(10ns)2CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3nsCAS LatencytRCDtRAStRCtRPtACtOH125MHz(8ns)3CLKs 3CLKs 6CLKs 9CLKs 3CLKs 6ns 3ns 100MHz(10ns)2CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 83MHz(12ns)2CLKs 2CLKs 4CLKs 6CLKs 2CLKs 6ns 3nsCAS LatencytRCDtRAStRCtRPtACtOH100MHz(10ns)2CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 83MHz(12ns)2CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 66MHz(15ns)2CLKs 2CLKs 4CLKs 6CLKs 2CLKs 6ns 3nsCAS LatencytRCDtRAStRCtRPtACtOH100MHz(10ns)3CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 83MHz(12ns)2CLKs 2CLKs 5CLKs 7CLKs 2CLKs 6ns 3ns 66MHz(15ns)2CLKs 2CLKs 4CLKs 6CLKs 2CLKs 6ns 3nsCOMMAND TRUTH TABLENote :1. Exiting Self Refresh occurs by asynchronously bringing CKE from low to high2. X = Don ′t care, H = Logic High, L = Logic Low. BA =Bank Address, RA = Row Address, CA = Column Address, Opcode = Operand Code, NOP = No OperationCommandCKEn-1CKEnCSRASCASWEDQMADDRA10/APBA NoteMode Register Set H X L L L L X OP codeNo Operation H XH X X XXX LH H H Bank Active H X L L H H X RAV ReadHXLHLHXCALVRead with Autoprecharge H WriteHXLHLLXCALVWrite with Autoprecharge H Precharge All BanksHXLLHLXXH X Precharge selected Bank L VBurst Stop H XLH HLX X DQM H X V X Auto RefreshH H L L L H X XBurst-Read-Single-WRITEH X L L L H X A9 Pin High(Other Pins OP code)Self Refresh 1EntryH L L L L H XXExitLHHXXXXL H H H Precharge power downEntryHLHXXXXXL H H H ExitLHHXXXXL H H H Clock SuspendEntry H LHXXXXXLVVVExitLHXXPACKAGE INFORMATION400mil 54pin Thin Small Outline Package。

16215资料

PACIFIC DISPLAY DEVICESLCD Component Data SheetModel Number: 1621516 Character by 2 LineAlphanumeric LCD AssemblyWith COG ControllerNo internal backlight assemblyCONTENTSINFORMATION1. GENERALOverview 2 Product1.11.2 Part Numbering System 2Ratings 3 MaximumAbsolute1.31.4 Circuit Block Diagram 3Characteristics 3 Mechanical1.51.6 Input Signal Function 41.7 LCM Contrast Control and Bias 4Dimensions 5 LCD1.82. ELECTRICAL / OPTICAL CHARACTERISTICS2.1 DC Electrical Characteristics 62.2 AC Electrical Characteristics 6Characteristics 8 2.3Optical3. OPERATING PRINCIPALS AND METHODS3.1 LCD Controller Display and Control Functions 94. RELIABILITY 105. PRECAUTIONS FOR USING LCD MODULES 11139 Avenida Victoria – Suite 100 – San Clemente, CA – 92672Tel: 949-361-8957 – Fax: 949-361-9158 – Web: SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 16215 1. GENERAL INFORMATION1.1 Product Overview•16 Character x 2 line Alphanumeric Dot Matrix LCD Module•5V Operation•LCD Controller: Chip on Glass (COG) NT7603 or equivalent alpha-numeric controller• 4 Bit and 8 Bit parallel data interface options•Multiplexing driving: 1/16 duty, 1/4 bias•Operating Mode: TN (Twisted Nematic) or Super Twisted Nematic (STN) technology•LCD Module Service Life: 100,000 hours minimum1.2 Part Numbering System16215-SL-R-ST-12¾•¾••••¾•••¾••¾•(-6) 6 o’clock•(-12) 12 0’clockSPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 162151.3 Absolute Maximum RatingsSupply voltage for logic V DD Supply voltage for LCD V DD – V0 -- V DD +0.3V Input voltage VI -0.3 V DD +0.3 V Standard Operating temperature TOP (-ST) 0 50 ºC Standard Storage temperature TST (-ST) -10 60 ºC Extended Operating temperature TOP (-ET) -20 70 ºC Extended Storage temperature TST (-ET) -30 80 ºC Soldering Temp Tsolder 260 ºC1.4 Circuit Block Diagram ~1.5 Mechanical CharacteristicsItem Contents UnitModule size (W ×H ×T)65 x 27.70 x 2.85 Max mm Viewing area (W ×H) 61.0 × 15.7mm Character matrix (W ×H) 5 × 8dots Character size (W ×H) 2.95 × 5.15mm Dot size (W ×H) 0.55 × 0.60mm Dot pitch (W ×H) 0.60 × 0.65mmSPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 16215 1.6 Input Signal FunctionPin NO. Symbol Level Description1 VSS 0V Ground2 VO --- Bias voltage for LCD (Contrast)3 VDD 5.0V Supply voltage for logic4 RS H/L H : Data signal, L : Instruction signal5 R/W H/L H : Read mode, L : Write modeH,H6 E→ L Chip enable signal7 DB0 H/L Data bit 08 DB1 H/L Data bit 19 DB2 H/L Data bit 210 DB3 H/L Data bit 311 DB4 H/L Data bit 412 DB5 H/L Data bit 513 DB6 H/L Data bit 614 DB7 H/L Data bit 71.7 LCM Contrast Control and BiasSPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 16215 1.8 LCM Dimensions (with Cable)SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 16215 1.8 LCM Dimensions (without Cable – Reference Only)SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 162152. ELECTRICAL / OPTICAL CHARACTERISTICS2.1 DC Electrical Characteristics (V DD = +5V ±10% , V SS = 0V, Ta = 25°C )Parameter Symbol Condition Min Typ Max UnitSupply voltage for logicV DD --- 4.5 5.0 5.5 V Supply current for logic I DD --- --- 1.0 1.5 mA 0°C --- --- --- V 25°C 0 --- V DD V Operating voltage for LCD V DD -V O 50°C --- --- --- V Input voltage ' H ' level V IH --- VDD - 2.2 --- VDD V Input voltage ' L ' levelV IL--- 0 --- 0.8 V2.2 AC Electrical Characteristics• Write ModeCharacteristic Symbol Min. Typ. Max. Unit Test pinE cycle time t C 500 --- --- ns E E rise time t r --- --- 25 ns E E fall timet f --- --- 25 ns E E pulse width (High, Low)t W 300 --- --- ns E R/W and RS set-up time (8 Bit) t SU160 --- --- ns R/W, RS R/W and RS set-up time (4 Bit) t SU1100 --- --- ns R/W, RS R/W and RS hold time t h110 --- --- ns R/W, RS Data set-up time t SU2100 --- --- ns DB 0 ~ DB 7Data hold timet h210 --- --- ns DB 0 ~ DB 7SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 16215 •Read ModepinMin. Typ. Max. Unit Test Characteristic SymbolE cycle time t C500 --- --- ns EE rise time t r--- --- 25 ns EE fall time t f--- --- 25 ns EE pulse width t W300 --- --- ns ER/W and RS set-up time (8 Bit) t SU60 --- --- ns R/W,RSRS R/W and RS set-up time (4 Bit) t SU100 --- --- ns R/W,RS R/W and RS hold time t h10 --- --- ns R/W,Data output delay time t D--- --- 190 ns DB0 ~ DB7Data hold time t DH20 --- --- ns DB0 ~ DB7SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 162152.3 Optical Characteristics (V OP = 4.7V, Ta = 25°C )Item Symbol Condition Min Typ Max Unit Remarks NoteResponse time Tr --- --- 180 --- ms --- 1Tf --- --- 98 --- ms --- 1 Contrast ratio Cr --- --- 7.5 --- --- --- 239 --- --- deg ∅ = 90° 3 35 --- --- deg ∅ = 270°3 37 --- --- deg ∅ = 0° 3 Viewing angle range θCr ≥ 2 36 --- --- deg ∅ = 180° 3SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 16215 3. OPERATING PRINCIPALS AND METHODES3.1 LCD Controller Display and Control FunctionsPlease refer to NOVATEK NT7603 DATASHEET.Pacific Display website: /ics_app%20notes/novatek/NT7603.pdfSPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 16215 4. RELIABILITYLCD Panel Service LifeDefinition of panel service life•100,000 hours minimum at 25° C ±10%•Contrast becomes 30% of initial value•Current consumption becomes three times higher than initial value•Remarkable alignment deterioration occurs in LCD cell layer•Unusual operation occurs in display functionsSPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 16215 5. PRECAUTIONS FOR USING LCD MODULESInstalling LCD ModulesThe hole in the printed circuit board is used to fix LCM as shown in the picture below. Attend to the following items when installing the LCM.1)Cover the surface with a transparent protective plate to protect the polarizer and LC cell.2)When assembling the LCM into other equipment, the spacer to the bit between the LCM and the fitting plateshould have enough height to avoid causing stress to the module surface, refer to the individual specifications formeasurements. The measurement tolerance should be ±0.1mm.Precaution for Handing LCD ModulesSince LCM has been assembled and adjusted with a high degree of precision, avoid applying excessive shocks to the module or making any alterations or modifications to it.1)Cover the surface with a transparent protective plate to protect the polarizer and LC cell.2)Do not alter, modify or change the shape of the tab on the metal frame.3)Do not make extra holes on the printed circuit board, modify its shape or change the positions of components tobe attached.4)Do not damage or modify the pattern writing on the printed circuit board.5)Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal connector.6)Except for soldering the interface, do not make any alterations or modifications with a soldering iron.7)Do not drop, bend or twist LCM.Electro-Static Discharge ControlSince this module uses a CMOS LSI, the same careful attention should be paid to electrostatic discharge as for an ordinary CMOS IC.1)Make certain that you are grounded when handing LCM.2)Before remove LCM from its packing case or incorporating it into a set, be sure the module and your body havethe same electric potential.3)When soldering the terminal of LCM, make certain the AC power source for the soldering iron does not leak.4)When using an electric screwdriver to attach LCM, the screwdriver should be of ground potentiality to minimizeas much as possible any transmission of electromagnetic waves produced sparks coming from the commutator ofthe motor.5)As far as possible make the electric potential of your work clothes and that of the work bench the groundpotential.6)To reduce the generation of static electricity be careful that the air in the work is not too dried. A relativehumidity of 50%-60% is recommended.Precaution for soldering to the LCM1)Observe the following when soldering lead wire, connector cable and etc. to the LCM.a)Soldering iron temperature : 280°C ± 10°C.b)Soldering time : 3-4 sec.2)Solder : eutectic solder.SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 162153)If soldering flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This doesnot apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD surface with acover during soldering to prevent any damage due to flux spatters.4)When soldering the electroluminescent panel and PC board, the panel and board should not be detached morethan three times. This maximum number is determined by the temperature and time conditions mentioned above,though there may be some variance depending on the temperature of the soldering iron.5)When remove the electroluminescent panel from the PC board, be sure the solder has completely melted, thesoldered pad on the PC board could be damaged.Precautions for Operation1)Viewing angle varies with the change of liquid crystal driving voltage (VO). Adjust VO to show the best contrast.2)Driving the LCD in the voltage above the limit shortens its life.3)Response time is greatly delayed at temperature below the operating temperature range. However, this does notmean the LCD will be out of the order. It will recover when it returns to the specified temperature range.4)If the display area is pushed hard during operation, the display will become abnormal. However, it will return tonormal if it is turned off and then back on.5)Condensation on terminals can cause an electrochemical reaction disrupting the terminal circuit. Therefore, itmust be used under the relative condition of 40°C , 50% RH.6)When turning the power on, input each signal after the positive/negative voltage becomes stable.Safety•If the LCD panel breaks, be careful not to get the liquid crystal in your mouth. If the liquid crystal touches your skin or clothes, wash it off immediately using soap and plenty of water.Handling•The display panel is made of glass. Do not subject it to a mechanical shock by dropping it or impact.•If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap and water.•Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary.•The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully.•If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is heavily contaminated, moisten cloth with one of the following solvents :o Isopropyl alcoholo Ethyl alcohol•Solvents other than those above-mentioned may damage the polarizer. Especially, do not use the following.o Watero Ketoneo Aromatic solvents•Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets, moisture condensation or a current flow in a high-humidity environment.•Install the LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the backlight cable.•Do not attempt to disassemble or process the LCD module.•NC terminal should be open. Do not connect anything.•If the logic circuit power is off, do not apply the input signals.SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE MODEL NO: 16215 •To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment.o Be sure to ground the body when handling the LCD modules.o Tools required for assembling, such as soldering irons, must be properly grounded.o To reduce the amount of static electricity generated, do not conduct assembling and other work under dry conditions.o The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this protective film since static electricity may be generated.Storage•When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps•Store the module in a dark place where the temperature is 25 o C ±10 o C and the humidity below 65% RH.•Do not store the module near organic solvents or corrosive gases.•Do not crush, shake, or jolt the module (including accessories).Cleaning•Do not wipe the polarizing plate with a dry cloth, as it may scratch the surface.•Wipe the module gently with soft cloth soaked with a petroleum benzene.•Do not use ketonic solvents (ketone and acetone) or aromatic solvents (toluene and xylene), as they may damage the polarizing plate.Others:•Liquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subject to a low temperature.•If the LCD modules have been operating for a long time showing the same display patterns, the display patterns may remain on the screen as ghost images and a slight contrast irregularity may also appear. A normal operating status can be regained by suspending use for some time. It should be noted that this phenomenon does not adversely affect performance reliability.•To minimize the performance degradation of the LCD modules resulting from destruction caused by static electricity etc., exercise care to avoid holding the following sections when handling the modules.-Exposed area of the printed circuit board.-Terminal electrode sections.。

19665;中文规格书,Datasheet资料

Dual-Wire Dual-Operator Programmable Monitor DescriptionThe patented* Desco Dual-Wire Dual-OperatorProgrammable Monitor monitors two operators and two ESD work worksurfaces eliminating the need for periodic Figure 1. Desco 19665 Dual-Wire Dual-Operator Programmable MonitorFeatures and ComponentsTECHNICAL BULLETIN TB-3019Made in theUnited States of AmericaFigure 2. Dual-Wire Dual-Operator Programmable CBDE FG H I J K LFRONT VIEWBACK VIEWOperation1. Monitoring of the operators will remain in the STANDBY condition until a wrist cord is plugged into the operator remote. STANDBY mode is indicated by a blinking yellow operator LED.10mm snap needs to pierce and clinch bottom side of mat. Snap needs to be at least 12" apart or 72" max. 10mm snap needs to pierce and clinch bottom side of mat. Snap needs to be at least 12" apart or 72" max.OPERATOR 1WORKSURFACEOPERATOR 2WORKSURFACE10mm PUSH & CLINCH SNAP10mm PUSH & CLINCH SNAPBENCH GROUNDMAT 1 WIRING WHITE CABLEMAT 2 WIRING BLACK CABLEWRIST STRAP MONITORWRIST STRAP MONITORELECTRIC GROUNDOPERATOR 2REMOTE JACK BLACK CABLEOPERATOR 2REMOTE JACK WHITE CABLE Screw allows ground cord to be bolted to mat; keeps cord from disconnecting.Figure 3. Installing the Dual-Wire Dual-Operator Programmable MonitorororFigure 4. Connecting a dual-wire wrist strap to the operator remoteSETTING THE OPERATOR TEST VOLTAGE AND TEST LIMITThe Dual-Wire Dual-Operator Monitor’s operator test voltage and high test limit can be set to different values. The operator test voltage can be set to either +5V or +8V, and the operator high test limit can be set to either 10 megohms or 35 megohms. The default voltage is +8V, and the default operator high test limit is 10 megohms. These settings are controlled by a set of 3 switches located inside the monitor’s enclosure.NOTE: Desco recommends re-calibration of the monitor should either setting be changed. See the “Calibration” section for more information.To gain access to these switches, remove the monitor’s cover and position the monitor so the PCB matches the orientation shown in Figure 5. Switches SW1 and SW2 control the operator test voltage. Switch SW3 controls the operator high test limit.Operator Test Voltage+5VSW1 Position: RIGHTSW2 Position: LEFT+8VSW1 Position: LEFTSW2 Position: RIGHTOperator High Test Limit10 megohmsSW3 Position: RIGHT35 megohmsSW3 Position: LEFTCalibrationFrequency of recalibration should be based on the critical nature of those ESD sensitive items handled and the risk of failure for the ESD protective equipment and materials. In general, Desco recommends that calibration be performed annually.Use the EMIT 50524 Limit Comparator for Dual-Wire Monitors to perform periodic testing (once every 6-12 months) of the Dual-Wire Dual-Operator Programmable Monitor. The Limit Comparator can be used on the shop floor within a few minutes virtually eliminating downtime, verifying that the monitor is operating within tolerances. See TB-6542 for more information.Figure 5. Switches SW1, SW2 and SW3 inside the monitor’s enclosure Figure 6. EMIT 50524 Limit Comparator for Dual-Wire MonitorsNIST CalibrationDesco provides a basic, National Institute of Standardsand Technology (NIST) traceable calibration for theproducts that we manufacture. This is sometimesreferred to as a Level 1 calibration.For more on National Institute of Standards andTechnology see:/index.htmlFor more information on the calibration that Desco’sprovides for products that we manufacture see:/Calibration.aspxSpecificationsOperating Voltage 12 VDCOperating Temperature 32°F - 104°F (0 - 40°C)Monitor Dimensions 4.4" x 4.7" x 2.1"(11.2cm x 11.9cm x 5.3cm)Monitor Weight 1.1 lbs (0.5 kg)TEST VOLTAGESOperator +8 V** or +5 VWorksurface 200 mVTEST LIMITSOperator Low Fail: < 1.72 megohmsPass: 2 - 9 megohms**High Fail: > 11.5 megohms**orPass: 2 - 30 megohmsHigh Fail: > 40 megohmsWorksurface Pass: < 3.5 megohmsFail: > 3.8 megohms**DefaultFigure 7. Operator Remote dimensionsReplacement remotes are available as EMIT itemnumbers 50525 and 50526.分销商库存信息: DESCO19665。

各类软件注册码大全

各类软件注册码大全AAceHTML Pro 5.01.1－Name:Sponge Uk - TNT[CraCK!TEaM] Code:FVTW-5YAD-LAFT-HMMQAdobe PageMaker 7.0－S/N：1039-1121-2998-7586-7388-7545 Adobe Photoshop V6.01中文正式版安装序列号：PWC601R3382269-296或者PWC601R4999617-923acdsee32 2.0sender 27168acdsee32 3.0 full911913243408102441光盘版700076064285591441acdsee 3.1SN:881451784190102441132728175249781441ACDsee SR1 PowerPack Retail243478918944730541ACDSee 4.0 零售注册版SN:711-108-595-288-491-441ACDSee 4.0 Power Pack Suite708-801-298-633-437-541Acrobat 4.0AOW301R7136978-298Acrobat 5。

sn:AEB100R3498245-291 Acrobat 5 正式版注册码：KWW500R7150122-128Adobe LiveMotion v1.0.0.78正式版(34.8M) 安装序列号：GDW100R7100002-687 ArGoSoft 1.2.2.2Name:Free User Code:5DD12A4D69828673 ArGoSoft Mail Server Plus 1.6.1.8Name:Free User Code:D0CC1653E2F3251FASPEdit 2000 build 10。

下载(5.43M) 注册码：Name:tiger Number:93867AutoCAD R14 : s/n: 110-99423726 Key: WYUR Code: B4D83673 or s/n: 117-99703105 Key: W36H Code: C3DF32EAA1MONITOR 2001 V5.6.2-Code:Y4176AbsoluteFTP 2.0.0 Beta 4-Name:CZY Company:CZYSerial:02-16-361500 Key:18292198071562904476 Date:NeverAbsoluteFTP 2.0.0 Beta 2-Name:CZY Company:CZYSerial:02-16-361500 Key:18292198071562904476 Date:NeverAbsoluteFTP 2.0.0 Beta 1-Name:CZY Company:CZYSerial:02-16-361500 Key:18292198071562904476 Date:NeverAbsolute Company:CZY Serial:02-16-361500Key:18292198071562904476 Date:NeverACDSee Power Pack Suite 4.0－Serial:708-801-298-633-437-541ACDSee 4.01.0598 零售注册版注册码：148-817-607-012-681-441 ACDSee 4.0 Retail 零售版－SN:711-108-595-288-491-441Ace2.05.0 User Code:A333U4-4XZ7PK-TTMDZC-WMBHAU Ace User Code:A333U4-4XZ7PK-TTMDZC-WMBHAUAce－Name:Free UserCode:A333U4-4XZ7PK-TTMDZC-WMBHAUAceHTML Pro V5.04－Name:Sponge Uk - TNT[CraCK!TEaM] Code:FVTW-5YAD-LAFT-HMMQAceHTML Pro V5.03.1－Name:Sponge Uk - TNT[CraCK!TEaM] Code:FVTW-5YAD-LAFT-HMMQAceHTML Pro 5.01.1－Name:Sponge Uk - TNT[CraCK!TEaM] Code:FVTW-5YAD-LAFT-HMMQAcqURL 6.1 Code:821452361253012614127138AcqURL 5.5 Code:821452361253012614127138Adobe Streamline 4.0注册码Adobe PageMaker 7.0－S/N：1039-1121-2998-7586-7388-7545 Adobe Photoshop V6.01中文正式版安装序列号：PWC601R3382269-296或者PWC601R4999617-923Adobe Photoshop V6.01中文正式版安装序列号：PWW550R7162534-100或者PWW600R7105467-948Adaptec Easy CD Creator V5.02PlatiniumSN:G-332NB-MGJNH-ZFVPB 或者sn:P-7TGQ4-G06CM-N5G1LAdaptec Easy CD Creator V5.0Platinium-sn:P-7TGQ4-G06CM-N5G1LAdvanced Direct Remailer 2.15-Code:ADR-99-PXHSY-749Advanced Direct Remailer 2.14-Code:ADR-99-PXHSY-749Advanced Disk Catalog1.47-Code:1303196920041974ny3hscMDeIhSe5sCAudioCD MP3 Studio 2000 V2.35－Code:CSN77B-0LasH0-0389Audio CD Maker 5.02 s/n: 11410355AMS 或者Code:ACDv50-765RRw978Audio CD Maker 5.01 s/n: 11410355AMS 或者Code:ACDv50-765RRw978AltoMP3 Maker 3.10－Name:Sponge Uk Code:2509556074ArGoSoft Mail Server Pro 1.8.0.7-Code:C8CCD24C4D1A9995Agent 1.91-s/n: HH2W7UP4-63W9NK4J-1ZR5831C-DVRCMYRG 安全之星XP正式版－－SN:CHR-SSV456-9985303DSK-3或者CHR-SSV234-9913220CHR-3Adobe After Effects V5.0－－sn:EWE780A7645038-389-588或者SN:EWW471R7080005-040-498Adobe After Effects V4.1--sn:EWW400R4000123-666-922Adobe Acrobat 5.0.1 简体中文版－－SN:KWC500R6538415-885Adobe Acrobat 5.0 正式完全版－－sn:AEB100R3498245-291或者sn:KWW500R7150122-128Adobe Acorobat full 4.0－－sn:AOW301R7136978-298Adobe Acorobat read 1.2－－sn:ARM100R3100034-100-397Adobe Acorobat distiller 2.1－－sn:DEE100R3001172-010-496Adobe Acorobat capture－－sn:WCW100R3101909-171Adobe Dimission 3.01－－sn:DJW301R2100011-348Adobe Genesis－－sn::44444 autoriznatincode:2077229778Adobe Illustrator 9.0繁体中文版－－sn:ABT800R7100102-625Adobe Illustrator 8.0中文版－－sn:ABW800X7102095-685或者sn:EXX500R5900103198-517Adobe PageMaker.v7.0－－S/N：1039-1121-2998-7586-7388-7545 Adobe Pagemaker 6.0－－sn:03W600R1124621-479Adobe Pagemaker NL v5.0－－sn: 03-5025-303224614简体中文正式版:SN:FM9FY-TMF7Q-KCKCT-V9T29-TBBBGAdobe Premiere 6.0 final－－sn:MBF500B7205104-998Adobe Premiere 5.1－－sn:MXX500R145503-500-448Adobe Premiere RT 5.1 for 9x/NT－－sn: MBF420U3000205-940 Adobe PhotoShop v6.01 中文版－－PWC601R3382269-296或者PWC601R4999617-923或者PWW600R7105467-948或者PWW550R7162534-100Adobe Photoshop 6.0－－sn:PWW600R7105467-948或者EXX600B6311279-428Adobe Photoshop 5.0－－sn:PWW400R7106337-339Adobe Photoshop 4.0－－sn:PWW250R3107069-312Adobe Photo deluxe－－sn:HTW200R7100048-493Adobe Streamline v4.0－－sn:SBW400U7102000-766或者SBW400U7100000-392Adobe Streamline v3.0－－sn:SBW300S1100640-184Adobe 无效manager－－sn:AWW400P0101591-292Adobe Wild 无效－－sn:FHW251R31003373AbsoluteFTP 2.0.0 Beta 4-Name:CZY Company:CZY Serial:02-16-361500 Key:18292198071562904476 Date:NeverAbsoluteFTP 2.0.0 Beta 2-Name:CZY Company:CZY Serial:02-16-361500 Key:18292198071562904476 Date:NeverAbsoluteFTP 2.0.0 Beta 1-Name:CZY Company:CZY Serial:02-16-361500 Key:18292198071562904476 Date:NeverAbsolute Company:CZY Serial:02-16-361500Key:18292198071562904476 Date:NeverAbsolute Name: RePulsive Company: Pirates Gone Crazy S/n:02-16-123456 Exp: Never Key: 01803292020690490481Absolute RC 11 Name: _RudeBoy_ Company: Phrozen Crew S/n: 02-01-900000 Exp: Never Key: 1237 9814 1293 3185 9734Absolute Final Name: CORE/JES Company: CORE S/n:00-00-000000 Exp: Never Key: 1074 2875 9697 3324 3564Absolute beta 6 Name: CORE/JES Company: CORE S/n:00-00-000000 Exp: never Key: 1074 2875 9697 3324 3564Absolute security pro 3.9--Name: CROSSFIRE ROCKER s/n: JDHULALBFRHMLQY or Name: FIREANGEL [EVD] s/n: NVMFTMKNPTUCHJAACDSee 4.01.0598 零售注册版注册码：148-817-607-012-681-441 AcdSee V4.0----sn：711-108-595-288-491-441AcdSee 3.1 build 921 Retail－－sn:243478918944730541ACDsee SR1 PowerPack Retail－－sn:243478918944730541ACDsee 3.1－－sn:132728175249781441Ace User Code:A333U4-4XZ7PK-TTMDZC-WMBHAUAce－Name:Free UserCode:A333U4-4XZ7PK-TTMDZC-WMBHAUAce－－Name: Free User s/n:A333U4-4XZ7PK-TTMDZC-WMBHAUAceHTML Pro 5.01.1－Name:Sponge Uk - TNT[CraCK!TEaM] Code:FVTW-5YAD-LAFT-HMMQAceHTML Pro 4.30.1－－Name:Free UserCode:Q4LB-KG9X-Q8PB-3TN6AceHTML Pro 4.22.2－－Name:Free UserCode:Q4LB-KG9X-Q8PB-3TN6AceHTML Pro 4.22.1－－Name:Free UserCode:Q4LB-KG9X-Q8PB-3TN6Advanced Gif Animator 2.2 中文注册版－－注册码:0qT+7ks91OS6TwwuLvuwXOgnH9C1VSEo9HIWngLCMBIuHEWyJzuGuNjjAVvsQIf8lo8MhU4c6QZfVgfvrKE7u6ZOsdsLI8UGMKEK3nDr1cRHcvufQ9LTGS3Bz16BSbF7c7cd7gkAFbooFcHO/P8lPf FRTTAg+2Mnrz28OeYhZSIk=Advanced Direct Remailer 2.14-Code:ADR-99-PXHSY-749Advanced PDF Password Recovery 1.33－－注册码：PDFP-99322-EYSVY-886Advanced Archive Password Recovery 1.01－－NAME:Juan Lozada SERIAL:ARCHPR-TBHW5SSMYGQS-CUQ9SNYDE59T4KMM Advanced ZIP Password RecoveryV3.52----000031121939200619419SjuvbcAezSK2Gg3Advanced ZIP Password Recovery v3.11－－sn: 00003112193920061941Nqu5h797f6cAjz4UAltoMP3 Maker 3.10－Name:Sponge Uk Code:2509556074AltoMP3 Maker 2.2--Name:Free User SN:1LfDE2UKh1F5i9fCAlgolab_photo_vector_v1.01－－Name:stcsr Companv:Email:stcsr@ Serial:ALPVHFCHINCTMGOPQRSAqua 3D Screen Saver 1.5 汉化破解版－－name:任意Code:1234-6789-1234-67C2(程序运行时按空格键即可输入注册码)AutoCAD 2002 最终零售版－－Serial:400-12345678CD-KEY:T4ED6P 找E8B2FEFFFF 85C0 744F 8D4DF0 改为E8B2FEFFFF 85C0 754F 8D4DF0Audio Converter 3.0(0402)专门版－－Serialkey:08199-04923680536126119550AudioCD MP3 Studio 2000 V2.3－－SN:CSN77B-174094802fa Accounting98 全中文智能型会计软件----S/N：ADMINAutoCAD 2002 最终零售版----Serial:400-12345678CD-KEY:T4ED6P 找E8B2FEFFFF 85C0 744F 8D4DF0 改为E8B2FEFFFF 85C0 754F 8D4DF0Access 数据库v1.1----用户名：TonyLiang 注册码：B0B4F55D BBanner Maker Pro 3.0.3.3-Serial：3122545210621BeFaster 2.72 注册码Name:eCool[BCG],SN:3918457233Becky! Internet Mail 2.00.11-Name:Free UserCode:5603-3437-X099Becky! Internet Mail 2.00.08-Name:Free UserCode:5603-3437-X099BackupXpress Pro 2.72.32.174-Name:Free UserCode:0804-67-3595-YF-125905-3938BackupXpress Pro 2.71.16.151注册名Gmwz.Freeuset 注册码6891-87-3002-QV-669307-4136Bookmark Converter 2.91－Name:CZY Code:oqjbr28407Bootmanager BOOTSTAR 7.35-Name:UNREGISTERED! Code:BM1-E3BDN-ED81U-BB7DBootmanager BOOTSTAR 7.33-Name:UNREGISTERED! Code:BM1-E3BDN-ED81U-BB7DBootmanager BOOTSTAR 7.31-Name:UNREGISTERED! Code:BM1-E3BDN-ED81U-BB7DBootmanager BOOTSTAR 7.30-Name:UNREGISTERED! Code:BM1-E3BDN-ED81U-BB7DBootmanager BOOTSTAR 7.29-Name:UNREGISTERED! Code:BM1-E3BDN-ED81U-BB7DBootmanager BootStar 7.25－Name: UNREGISTERED! Code: BM1-E3BDN-ED81U-BB7DBlindwrite 1.2.4.9 Beta 多语言版Code:YRB1F1J1YDYU7MEJ Blindwrite 1.1.0.7 多语言版-Code:YRB1F1J1YDYU7MEJ办公之星企业版v3.0－Name:唐朝在线CompanyName SerialNumber:OST86-JG8L4-P6R25CCamtasia 3.0.1-Code:FE2D88D8-D546708505CD Mate Deluxe(光碟工坊) 2.2.3.11-Code:CMSBDF04072AB CD Mate Deluxe(光碟工坊) 2.2.2.6-Code:CMSBDF04072ABCD Mate Deluxe(光碟工坊) 2.2.2.5-Code:CMSBDF04072ABCD Mate Deluxe(光碟工坊) 2.2.1.30-Code:CMSBDF04072AB CD Mate Deluxe(光碟工坊) 2.2.1.2－Code:CMSBDF04072AB CD Mate Deluxe(光碟工坊) 2.1.2.27－Code:CMSBDF04072AB CD Mate Deluxe(光碟工坊) 2.1.1.27－Code:CMSBDF04072AB CD Mate Deluxe(光碟工坊) 2.1.1.23－Code:CMSBDF04072AB CD Mate Deluxe(光碟工坊) 2.1.1.19－Code:CMSBDF04072ABCD Mate Deluxe(光碟工坊) 2.1.0 Build 30－Code:CMSBDF04072ABCDRWin 5.02.000 Final 正式版注册码CDRWin V5.0 正式版注册码CDRWin V4.0a Build 2002.01.26注册码CDRWin V4.0a Build 2002.01.09注册码CompuPic Pro 6.0 Build 1155－Name:TMD Photo:666888 Code:1BB3ASX2X4Q19Cookie Pal 1.7a Name:Free User Code:4064650CloneCD V4.0.0.0 Final－注册码CloneCD 3.3.4.1 多语言版－注册码CloneCD 3.3.3.1 多语言版－注册码CloneCD 3.3.2.1 多语言版－注册码CloneCD 3.3.1.1 多语言版－注册码CloneCD 3.2.2.1 多语言版－注册码CloneCD 3.2.2.1 多语言版－注册码CloneCD 3.1.1.0 多语言版－注册码CloneCD 3.1.0.0 多语言版－注册码CloneCD 3.0.9.1 多语言版－注册码Clean Disk Security 6.01-Code:deepgreenClean Disk Security 5.2-Code:deepgreenCuteFtp通用注册码Name:1key.126 custom:1keysn:AY6RP7E6V9DX37Cute V2.0注册序列号：A6B34224J2J423 姓名：Dr_NetCute Cleaner v2.0 Name:广明网站S/N:G90Q-U4WU-RQZR-A91V Customizer XP 1.7.8 正式版－Code:28031979-ph-17081945Customizer XP 1.7－Code:28031979-ph-17081945Customizer XP 1.6－Code:28031979-ph-17081945Customizer XP 1.5－Code:28031979-ph-17081945Customizer XP 1.4－Code:28031979-ph-17081945CPUCool 7.09完全版Code:7398356超级兔子魔法设置系列注册码超级兔子魔法设置(Magic Set)2002中文零售版本序列号SRMSS10987-RKMJQTMNOAC或者序列号SRMSS39797-LGABCSFNKHS超级兔子魔法设置4.17 注册：Name：好论坛Code：CXMSR-FOLEDUVWIUP或者Name:leeyamSN:CXMS-AFSTUABAPMA超级兔子魔法设置4.16 新注册：姓名:REGISTER 注册码:CXMS-HECGRSTHBJK超级兔子魔法设置4.16 注册：姓名:fpxfpx 注册码:CXMS－GIFDSFGHBVD超级兔子魔法设置V4.1(Magic Set) 简体中文版注册名：NAME:小鱼儿SN:CSMX-XUEIPQREQWE或者NAME:爱你一万年SN:CXMS-DAEIPQREBWE超级兔子魔法设置3.99简体中文版(Super Rabbit MagicSet)NAME:fish SN:CXMS-PMEIPQREAWE超级兔子魔法设置3.99简体中文版(Super Rabbit Magic Set)注册名：星梦之网注册码：CXMS-FCBJOPQWDHQ超级兔子魔法设置3.98简体中文版Name：好论坛Code：CXMSR-FOLEDUVWIUP超级兔子注册表优化V4.8－NAME:小鱼儿SN:CSMX-XUEIPQREQWE彩票点金术4.0版email:fish[BCG] sn:w>]_>DQI?otpMu超级兔子魔法设置4.15 简体中文版( 3950KB )注册名：爱你一万年注册码：CXMS-DAEIPQREBWE注册名：有钱真好注册码：CXMS-FXUEDUVWINP超级兔子魔法设置〔Magic Set〕4.16 简体中文版用户名：Register 密码：CXMS-HECGRSTHBJK超级兔子魔法设置2002 零售版序列号：SRMSS10987-RKMJQTMNOACCDRWinName: CoKeBoTtLe99Unlock Code: 60D015F4-600893EB-BEFF5755-53E4E943Check Code: 3334FCB7-00D8861F-DEF7C4BE-ED1BBE16CDRWin 3.8b注册码：Name:CHENZYKey Code:2415FEE6-3BFE6E6D-8E3A5B70-5FDCD80ACheck Code:7BC926EC-1FEB908B-B5C4351D-D1E6837ACDRWIN v4.0AName: CoKeBoTtLe99Unlock Code: 60D015F4-600893EB-BEFF5755-53E4E943Check Code: 3334FCB7-00D8861F-DEF7C4BE-ED1BBE16CloneCD v2.7.8.1 ，能够把PS碟做成*.image文件，Daemon Tools V2.23版支持！Name: Ron Erlandsons/n:1048CC2C56535F626771FEAC48458EA2E109DFE407215DD41E200D689AF86EBEB00FC5EF072323E7E44A04CA5F4BE2C07D347864517CB4C0F692501CD1001BBFclonecd2842Name:Karen Keheleys/n:10542B69A0FDB37CBDD65A6D826C7763C0E1ED5F5EFFCB6DCCA9CF844F2284BEB10F68BF6FFC23E6E44A04CA5F4B3CF57DCFB1DE01FFB4C0457E57BBD1001BBFCloneCD v3.0.0.11Name:microkeCode:10D3853C8C003B8ED5E83B851C9E8756B8D61AEC441BE7AB91F0253DADC257BEB10F23EC7F6F23E6E44A04CA5F4BCB577E578A67ABE9B4BF693ADAE2D1001BBFCorel Draw 10D10NR-3284253T76Delphi6(134M)另一下载注册码:z9j8-pum4n-c6gzq认证码:rw2-7jwDDelphi6.0 企业版Serial:z9j8-pum4n-c6gzq Key:rw2-7jwDelphi 6 Personal Edition-serial: n5qh-6rk23-zmr85 Key: d32-ru2 DHTML Menu注册信息Name:Ramon AlvarezCode:62F7BDA050509968E1CE12FCB2CB9A02Disk2Disk 1.3 Build 175 Name:CHZHY E-mial:CZY@USA Serial:lYQrfJHmxxzHsSqszWAz5-XJ3cZYkoPgDownload Mage V1.85a 注册信息用户：注册用户；注册码：AAA7F1062D544D47或者用户名:Ronnier，注册码:A7FCF3A4274A725BDownload Mage V1.85 注册信息用户：注册用户；注册码：AAA7F1062D544D47Download Mage V1.84c 注册信息用户：注册用户；注册码：AAA7F1062D544D47Dll Show 4.8－Name:[eGIS! '98] Company:UCF/PCE '98 Code:3743079544Dll Show 4.7－Name:[eGIS! '98] Company:UCF/PCE '98 Code:3743079544Drive Image 2002 6.0 正式零售版－SN:DM600EI1-110314DU METER 3.02 Build 54-Name:Shaligar^LashCode:D4123450E1B66A8944C2F4F8DynSite 1.11 Build 586.6－Name:Free User Code:40341-372DynSite 1.11 Beta Build 582.5-Name:Free User Code:40341-372 DynSite 1.11 Beta Build 525.3-Name:Free User Code:40341-372东方网页王II 正式版序列号任意输入(格式：000-000-000)Dr.eye 2001SN：DREYE2001-DJYGF-F8Y7L-HIGBBIE-5681EEasy CD Creator V5.02 PlatiniumSN:G-332NB-MGJNH-ZFVPB 或者sn:P-7TGQ4-G06CM-N5G1LEasy CD-DA Extractor v4.7.1注册码Easy CD-DA Extractor 4.6.9 XP Key:Double@RonCheckKey:MMPSNNCMDMEasy CD-DA Extractor 4.6.1 Build 100-Key:easy@easy CheckKey:7E29EE2YDM 或者Code:28031979-ph-17081945 Easy CD-DA Extractor 4.6.1 Build 69-Key:easy@easy CheckKey:7E29EE2YDM 或者Code:28031979-ph-17081945 Easy CD-DA Extractor 4.6.1 Build 3 注册：Code:28031979-ph-17081945Easy CD-DA Extractor 4.6.1 Build 3-Key:easy@easy CheckKey:7E29EE2YDMEasy CD-DA Extractor 4.6.1 Build 2-Key:free@soft CheckKey:W8JHJP4CDMEmEditor 任何版本通用注册码EmEditor V3.25注册码EmEditor V3.24注册码EmEditor V3.23注册码EmEditor 3.21 注册码EmEditor 3.19注册码Enter 500零售版SN:trackgroove27EditPlus V2.11－Name:Free User Code:CDC8D0784D8EditPlus 2.11.105 Beta－Name:Free User Code:CDC8D0784D8 EditPlus 2.11.102 Beta－Name:Free User Code:CDC8D0784D8 EditPlus 2.11.0086 Beta-Name:Free User Code:CDC8D0784D8 EzyMassMail 2.6.9-Name:EZY Code:554A49Easy CD Creator 4.03 Delux(84M)SN:110010629931◆Easy CD Creator 5.0 Platinium零售版(91M)sn:P-7TGQ4-G06CM-N5G1LY-73YHY-SENW9-Y9B4TEye Candy 4000 正式版sn: DIJOMMHCPEOMFFaxMail for Windows v9.37.01-Name:FAX Code:303 733 393 53C Fax Mail Network n9.37.01-Name:CZY Code:303 734 353 936 Fine Print V4.69 For Win9x/Me－Code:P4QX-XAGA-2U83Fine Print V4.69 For WinNT/2000/XP－Code:JFVT-SNGN-TLMJ Fine Print V4.69 Enterprise Edition－Code:CJVE-8MSM-HTM9 Fine Print V4.65 For Win9x/Me－Code:P4QX-XAGA-2U83Fine Print V4.65 For WinNT/2000/XP－Code:JFVT-SNGN-TLMJ Fine Print V4.65 Enterprise Edition－Code:CJVE-8MSM-HTM9Fine Print V4.64 For Win9x/Me－Code:P4QX-XAGA-2U83Fine Print V4.64 For WinNT/2000/XP－Code:JFVT-SNGN-TLMJ Fine Print V4.64 Enterprise Edition－Code:CJVE-8MSM-HTM9 Fine Print 2000 V4.63 For Win9x/Me－Code:P4QX-XAGA-2U83Fine Print 2000 V4.63 For WinNT/2000/XP－Code:JFVT-SNGN-TLMJFine Print 2000 V4.63 Enterprise Edition－Code:CJVE-8MSM-HTM9Fine Print 2000 V4.62 For Win9x/Me－Code:P4QX-XAGA-2U83Fine Print 2000 V4.62 For WinNT/2000/XP－Code:JFVT-SNGN-TLMJFine Print 2000 V4.62 Enterprise Edition－Code:CJVE-8MSM-HTM9FinePrint 2000 V4.61 For WinNT/2000/XP Name:archi[ga]medis Serial:JNUN-3LRV-XFYM 或者注册名：任意注册码：N3KH-22N2-6XZCFinePrint 2000 V4.61 For Win9x/Me Name:archi[ga]medis Serial:JNUN-3LRV-XFYM 或者注册名：任意注册码：N3KH-22N2-6XZC2000 V3.2－Name: Gmwz Organization: S/N: 2536147608Fast Browser Pro 4.3.0 注册：Name:Team TSZ Code:03429714Fast Browser Pro V4.02 Build 20011010(专业版) name:fish[BCG] sn:317614552Fast Browser V4.02 Build 20011010(一般版) name:fish[BCG] sn:255416713Free Mem Pro-Serial:880020461245FlashFXP 1.4.4 build 836注册码FlashFXP v1.4.3 Build 835注册码FlashFXP 1.4.2 build 831注册码FlashGet网际快车(JetCar) 1.3正式版注册码FlashGet网际快车(JetCar) 1.2正式版注册码FlashGet网际快车(JetCar) 1.2 beta 1姓名FLASHGET 注册码:22029EC2M7FlashGet网际快车(JetCar) 1.1姓名FLASHGET 注册码:22029EC2M7FlashGet网际快车(JetCar) 1.00姓名FLASHGET 注册码:22029EC2M7FlashGet网际快车(JetCar) 1.0 beta 1姓名FLASHGET 注册码:22029EC2M7FlashSoft V1.081 用户名：振宇软件注册码：1928257252 FlashGet V0.91 中文版，强烈举荐!用户名称：madiori 注册码：03001EA1L00.95中文版Name:Gordon Code:19226GC1L9网际快车(FlashGet) V1.1 国际版Name:Gordon Code:19226GC1L9FrontPage 984156-00771514.0.0.4-Code:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAagAAA4tw+jtCDgL/EEhUVFA6Ly9DSFpIWS5DT00USFRUU DovL0NIWkhZLjEyNi5DT003.1.0.1-Code:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAagAAA4tw+jtCDgL/EEhUVFA6Ly9DSFpIWS5DT00USFRUU DovL0NIWkhZLjEyNi5DT004.0.0.1 Beta-Code:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAagAAA4tw+jtCDgL/EEhUVFA6Ly9DSFpIWS5DT00USFRUU DovL0NIWkhZLjEyNi5DT004.0.0.2 Beta-Code:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAagAAA4tw+jtCDgL/EEhUVFA6Ly9DSFpIWS5DT00USFRUU DovL0NIWkhZLjEyNi5DT003.1.0.3-Code:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAagAAA4tw+jtCDgL/EEhUVFA6Ly9DSFpIWS5DT00USFRUU DovL0NIWkhZLjEyNi5DT00FinePrint 4.71 注册码：NT63-A8D8-6JNXFloppy Image 2.02 注册：Name:ttdown Code:262478647GGetRight 4.5d-Code:296820439022 或者Serial: 769465734529GetRight 4.5b-Code:296820439022 或者Serial: 769465734529光碟工坊(CD Mate Deluxe) 2.2.3.11简体中文版-Code:CMSBDF04072AB光碟工坊(CD Mate Deluxe) 2.2.1.30简体中文版-Code:CMSBDF04072AB光碟工坊(CD Mate Deluxe) 2.2.1.23简体中文版-Code:CMSBDF04072AB光碟工坊(CD Mate Deluxe) 2.1.1.27简体中文版-Code:CMSBDF04072AB光碟工坊(CD Mate Deluxe) 2.1.0 Build 30－Code:CMSBDF04072ABDreamweaver UltraDev 4.0 正式版UDW400-06066-07241-71420HHappyIcon 2.60 Name:Free First Name:Free Code:-926885702HappyIcon 2.56-Name:Free First Name:Free Code:-926885702Hare 1.4.1 Name: LAXiTY s/n: 8102939002146Harddisk Partitioner PartitionStar 1.44－Name:UNREGISTERED! Code:PS1-E389N-ED81U-BB7DHarddisk Partitioner PartitionStar 1.41－Name:UNREGISTERED! Code:PS1-E389N-ED81U-BB7DHyperSnap-DX 4.22 注册码HTMLock 1.62-Serial:8K5RE2707KAH6UTC022RK6R51HCEK860ARuHHTML治理专家1.3版注册名：zdh 注册码：TEP3VDOGY91J呼吸『OK了！』——主页秀V2.0注册方法Head Line Studio。

BYL1520CT资料

Philips Semiconductors Product specificationRectifier diodes PBYL1525CT, PBYL1525CTB seriesSchottky barrierFEATURESSYMBOLQUICK REFERENCE DATA• Low forward volt drop • Fast switching• Reverse surge capability• High thermal cycling performance • Low thermal resistanceGENERAL DESCRIPTIONDual schottky rectifier diodes intended for use as output rectifiers in low voltage,high frequency switched mode power supplies.The PBYL1525CT series is supplied in the SOT78(TO220AB)conventional leaded package.The PBYL1525CTB series is supplied in the SOT404surface mounting package.PINNINGSOT78 (TO220AB)SOT404LIMITING VALUESLimiting values in accordance with the Absolute Maximum System (IEC 134)SYMBOL PARAMETER CONDITIONSMIN.MAX.UNIT PBYL1520CT 25CT PBYL1520CTB 25CTB V RRM Peak repetitive reverse -2025V voltageV RWM Working peak reverse -2025V voltageV R Continuous reverse voltage T mb ≤ 107 ˚C-2025V I O(AV)Average rectified output square wave; δ = 0.5; T mb ≤ 127 ˚C -15A current (both diodes conducting)I FRM Repetitive peak forward square wave; δ = 0.5; T mb ≤ 127 ˚C -15A current per diodeI FSMNon-repetitive peak forward t = 10 ms -90A current per diode t = 8.3 ms-100A sinusoidal; T j = 125 ˚C prior to surge; with reapplied V RRM(max)I RRM Peak repetitive reverse pulse width and repetition rate -1A surge current per diode limited by T j maxT j Operating junction -150˚C temperatureT stgStorage temperature- 65175˚C1. It is not possible to make connection to pin 2 of the SOT404 package.Philips Semiconductors Product specification Rectifier diodes PBYL1525CT, PBYL1525CTB series Schottky barrierTHERMAL RESISTANCESSYMBOL PARAMETER CONDITIONS MIN.TYP.MAX.UNITRth j-mb Thermal resistance junction per diode--3K/W to mounting base both diodes-- 2.5K/WRth j-a Thermal resistance junction SOT78 package, in free air-60-K/W to ambient SOT404 package, pcb mounted, minimum-50-K/Wfootprint, FR4 boardELECTRICAL CHARACTERISTICSAll characteristics are per diode at Tj= 25 ˚C unless otherwise specifiedSYMBOL PARAMETER CONDITIONS MIN.TYP.MAX.UNITVF Forward voltage IF= 7.5 A; Tj= 150˚C-0.370.42VIF= 7.5 A; Tj= 125˚C-0.390.45VIF= 15 A; Tj= 125˚C-0.570.61VIF= 15 A-0.590.64VI R Reverse current VR= VRWM-0.25mAVR= VRWM; Tj= 100˚C-1020mACd Junction capacitance VR= 5 V; f = 1 MHz, Tj= 25˚C to 125˚C-350-pFPhilips Semiconductors Product specificationRectifier diodes PBYL1525CT, PBYL1525CTB seriesSchottky barrierPhilips Semiconductors Product specificationRectifier diodes PBYL1525CT, PBYL1525CTB seriesSchottky barrierMECHANICAL DATA1. Refer to mounting instructions for SOT78 (TO220) envelopes.2. Epoxy meets UL94 V0 at 1/8".Philips Semiconductors Product specificationRectifier diodes PBYL1525CT, PBYL1525CTB seriesSchottky barrierMECHANICAL DATAMOUNTING INSTRUCTIONS1. Epoxy meets UL94 V0 at 1/8".Philips Semiconductors Product specification Rectifier diodes PBYL1525CT, PBYL1525CTB series Schottky barrierDEFINITIONSData sheet statusObjective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications.Limiting valuesLimiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections ofthis specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application informationWhere application information is given, it is advisory and does not form part of the specification.© Philips Electronics N.V. 1998All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.LIFE SUPPORT APPLICATIONSThese products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.。

POWERTEC 205C、255C、305C零件备件说明书

IM302112/2020REV05 POWERTEC® 205C, 255C, 305CSpare Parts – POWERTEC® 205C (1)Figure A: Machine Assembly - POWERTEC® 205C (2)Figure B: Machine Assembly - POWERTEC® 205C (4)Figure C: Wire Drive Assembly - POWERTEC® 205C (5)Miscellaneous Items (not shown in figure A, B, C) - POWERTEC® 205C (5)Spare Parts – POWERTEC® 255C & 305C (6)Figure D: Machine Assembly - POWERTEC® 255C & 305C (6)ӿ HYPERLINK \l "_Toc59182563" Figure E: Machine Assembly - POWERTEC® 255C & 305C (9)Figure F, G: Wire Drive Assembly – POWERTEC® 255C & 305C (11)Miscellaneous Items (not shown in figure D, E, F, G) (11)Electrical Schematic (12)CODE: 50234 (12)CODE: 50235 (13)CODE: 50236, 50238, 50240 (14)CODE: 50237, 50239, 50241 (15)WEEE (16)Lincoln Electric Bester Sp. z o.o.ul. Jana III Sobieskiego 19A, 58-260 Bielawa, Polandwww.lincolnelectric.euSpare Parts – POWERTEC® 205CSP50234/50235 REV02Figure A: Machine Assembly - POWERTEC® 205CItem Description Part Number QTY 1 2 3 4 5 6 7 1 BASE R-3019-121-2/08R 1 X XWHEELS 1029-660-201R 2 X X2 REARWHEELS 1029-660-101R 2 X X3 FRONTT1 R-4034-096-1R 1 X -4 TRANSFORMERT1 R-4034-080-1R 1 - X TRANSFORMERSUPPORT R-1019-204-1/08R 1 X X5 FAN6 FAN 0873-100-031R 1 X XL1 R-4034-089-1R 1 X X7 CHOKER1 R-0010-308-1R 1 X X8 RESISTOR9 RECTIFIERV1 R-0010-309-1R 1 X X THERMAL SENSOR 80°C1115-769-003R 1 X XTHERMAL SENSOR 115°C1115-769-012R 1 X X10 REARPANEL R-1012-202-4/08R 1 X XCONNECTION) 2719-107-733R 1 X X(GAS11 STICKERSOLENOID 0972-423-005R 1 X X12 GASPLUG 1361-599-058R 1 X X13 HOLEHEIGHT) R-7040-228-3R 1 X XCYLINDER14 STICKER(GASLEAD R-5041-164-1R 1 X X15 POWER16 SHELF R-3019-123-3/08R 1 X XBUSH 1373-111-331R 2 X XCABLE17 RUBBERBUSH 1373-182-002R 3 X X18 RUBBERCABLE19 DIVIDER R-3019-201-1/08R 1 X XSTANDARD 0744-000-192R 1 X X20 REELHUBNUT B11035-1 1 X X21 PLASIC22 STICKER R-0010-276-1R 1 X XSOCKET 1158-632-032R 2 X X23 FUSECAP 1158-632-033R 2 X X24 FUSEF1 1158-660-010R 1 X X25 FUSEF2 1158-660-008R 1 X X26 FUSE27 SHIELD R-1019-197-1/08R 1 X X28 SHIELD R-1019-186-1/08R 1 X X29 STICKER R-0010-280-1R 1 X X30 KNOBS 9ET13639-3R 2 X XFigure B: Machine Assembly - POWERTEC® 205CItem Description Part Number QTY 1 2 3 4 5 6 7 RC 0874-400-011R 1 X X31 FILTER32 CLAMP 1361-599-398R 1 X X33 CABLERELEIF 1361-599-399R 1 X XT2 C-4244-374-2R 1 X X34 TRANSFORMERBOARD Y024-4R 1 X X35 P.C.36 CONTACTORK1 1115-212-207R 1 X -K1 1115-212-220R 1 - X CONTACTORX13 1131-990-005R 6 X -37 TERMINALBLOCKX13 1131-990-005R 9 - XX12,BLOCKTERMINALX11 1361-599-255R 1 - X38 TERMINALBLOCK39 PLATE D-2731-731-1R 1 - X40 STICKER(230/400V) R-0010-221-1R 1 - XPANEL R-3019-120-4/08R 1 X X41 FRONT42 SHIELD R-1019-221-1/02R 1 X XPRODUCT) R-0010-266-1R 1 X X(NAME43 STICKERSLEEVE 1361-599-708R 1 X X44 EUROPANEL) R-0010-263-1R 1 X X(FRONT45 STICKERX2,X3 C-2986-001-2R 2 X X46 SOCKETS47 STICKER 2719-107-053R 1 X XS1 1115-260-168R 1 X X48 SWITCHS3 1115-270-005R 1 X X49 SWITCHSHIELD 1115-299-073R 1 X XFLAME50 BLACKH1 0917-421-024R 1 X X51 LAMP52 POTENTIOMETERR13 1158-113-304R 3 X XR11,R12,53 KNOB 9ET10491R 1 X XS11 1115-280-005R 1 X X54 SWITCH55 SWITCHS12 1115-280-004R 1 X XSIDEPANEL R-3019-122-1/02R 1 X X56 RIGHT57 HINGLES D-2541-004-2/02R 2 X XDOOR R-1019-190-1R 1 X X58 WIREDRIVE59 LOCKS 0654-610-004R 2 X X60 LEFTPANEL R-1019-189-1R 1 X XSIDEX -1(WIRINGDIAGRAM) R-0010-264-1R61 STICKER- X1DIAGRAM) R-0010-265-1RSTICKER(WIRING62 COVER R-1012-209-2/02R 1 X X(WARNING) 2719-107-728R 1 X X63 STICKERFigure C: Wire Drive Assembly - POWERTEC 205CItem Description Part Number QTY 1 2 3 4 5 6 7 ASSEMBLY 0744-000-160R 1 X X WIREDRIVEPLATE 0744-000-219R 1 X X64 FEEDGUIDE 0744-000-224R 1 X X65 INLET66 ADAPTER 0744-000-227R 1 X X67 FIXINGCAP 0744-000-216R 1 X XCOVER 0744-000-218R 1 X X68 METAL69 PRESSURECOMPL. 0744-000-221R 1 X XARMPRESSUREARM 0744-000-220R 1 X X70 SPRINGCOMPL. 0744-000-223R 1 X XARM71 FIXING72 MOTOR 0744-000-229R 1 X XKEY 0646-231-102R 1 X X73 WOODROF74 EUROCOMPLETE R-8040-042-2R 1 X XSOCKETGUIDE R-2010-006-1R 1 X X75 OUTLET76 SLEEVES 1361-599-564R 2 X X77 SLEEVES 1361-599-565R 2 X X78 SLEEVES 1361-599-720R 2 X X79 STICKER 2719-107-732R 1 X XMiscellaneous Items (not shown in figure A, B, C) - POWERTEC® 205CItem Description Part Number QTY 1 2 3 4 5 6 7 (PRIMARY) R-5041-165-1R 1 X -80 WIRINGHARNESS(PRIMARY) R-5041-165-2R 1 - XHARNESS81 WIRING(SECONDARY) R-5041-166-1R 1 X XHARNESS82 WIRINGHARNESS R-5041-175-1R 1 X X83 WIRINGLEAD R-5041-101-1R 1 X X84 PESpare Parts – POWERTEC ® 255C & 305CSP50236/50237/50238/50239/50240/50241 REV02Figure D: Machine Assembly - POWERTEC ® 255C & 305CItem Description Part NumberQTY12345671 BASE R-3019-179-1/08R 1 X X X X X X2 REAR WHEELS 1029-660-201R 2 X X X X X X3 FRONT WHEELS 1029-660-101R 2 X X X X X X4 TRANSFORMER T1 R-4034-082-1R 1 X X - - - -TRANSFORMER T1 R-4034-083-1R 1 - - X X X X5 FAN SUPPORT R-1019-201-1/08R 1 X X - - - -FAN SUPPORT R-3019-183-1/08R 1 - - X X X X6 FAN 0873-100-031R 1 X X - - - -FAN R-8040-255-1R 1 - - X X X X7 RECTIFIER V1 R-0010-294-1R 1X X - - - -RECTIFIER V1 R-0010-295-1R 1 - - X X X X THERMAL SENSOR 80°C 1115-769-003R 1 X X X X X X THERMAL SENSOR 115°C 1115-769-012R 1 X X X X X X 8 CHOKE L1 R-4034-089-1R 1 X X X X X X THERMAL SENSOR 65°C 1115-769-053R 1 X X X X X X THERMAL SENSOR 140°C 1115-769-013R 1 X X X X X X 9 RESISTOR R1 R-0010-116-3R 1 X X X X X X 10 STICKER 2719-107-769R 1 X X X X X X 11 SHIELD R-1019-220-1/08R 1 X X X X X X 12 SHELFR-3019-181-1/08R1X X X X X X 13 RUBBER CABLE BUSH 1373-111-331R 1 X X X X X X 14 RUBBER CABLE BUSH 1373-182-002R 1 X X X X X X 15 DIVIDER R-3019-182-1/08R 1 X X X X X X 16 SHIELD R-1019-202-1/08R 1 X X X X X X 17 REEL HUB STANDARD 0744-000-192R 1 X X X X X X 18 PLASIC NUT B11035-1 1X X X X X X 19 FUSE SOCKET 1158-632-032R 2 X X X X X X 20 FUSE CAP 1158-632-033R2 X X X X X X 21 FUSE F11158-660-010R 1 X X X X X X 22 FUSE F2 1158-660-008R 1 X X X X X X 23 STICKER F1 2719-107-193R 1 X X X X X X 24 STICKER F2 2719-107-111R 1 X X X X X X 25 SHIELD R-1019-186-1/08R 1 X X X X X X 26 STICKER R-0010-280-1R 1 X X X X X X 27 SHIELD R-1019-203-1/08R 1 X X X X X X 28 KNOBS 9ET13639-3R 2 X X X X X X 29 SWITCH S11 1115-280-005R 1 X X X X X X 30 SWITCH S12 1115-280-004R 1 X X X X X X 31 REAR PANEL R-1019-198-1/08R 1 X X X X X X 32 BRACKETS R-1019-153-1/08R 2 X X X X X X 33 COVER R-1019-199-1/02R 1 X X X X X X 34 STICKER (WARNING) 2719-107-728R 1 X X X X X X 35 STICKER (LIFTING) R-0010-279-1R 1 X X X X X X 36 EYE BOLTS 0653-313-011R 2 X X X X X X 37 LEFT SIDE PANEL R-1019-216-1R 1 X X X X X X 38 STICKER (WIRING DIAGRAM) R-0010-298-1R 1 X - X - X - STICKER (WIRING DIAGRAM) R-0010-299-1R 1 - X - X - X 39 RIGHT SIDE PANEL R-3019-184-1/02R 1 X X X X X X 40 HINGLES D-3574-007-1/33R 2 X X X X X X 41 WIRE DRIVE DOOR R-1019-217-1R 1 X X X X X X 42 LOCKS 0654-610-004R2 X X X X X XFigure E: Machine Assembly - POWERTEC ® 255C & 305CItem Description Part NumberQTY123456743 FRONT PANEL R-3019-180-1/08R 1 X X X X X X 44 STICKER (FRONT PANEL) R-0010-254-1R 1 X X X X X X 45 LAMP H1 0917-421-024R 1 X X X X X X 46 SWITCH S3 1115-270-019R 1 X X X X X X 47 BLACK FLAME SHIELD 1115-299-073R 1 X X X X X X 48 SWITCH S1 1115-260-167R 1 X X X X X X 49 SWITCH S2 1115-260-166R 1 X X X X X X 50 POTENTIOMETER R11,R12, R13 1158-113-304R 3 X X X X X X 51 KNOB 9ET10491R 1 X X X X X X 52 SHIELD R-1019-205-1/02R 1 X X X X X X53 STICKER (NAME PRODUCT) R-0010-255-1R 1 X X - - - -STICKER (NAME PRODUCT) R-0010-256-1R 1 - - X X X X 54 EURO SLEEVE 1361-599-708R 1 X X X X X X 55 SOCKETS X2, X3 C-2986-001-2R 2 X X X X X X 56 FILTER RC 0874-400-011R 1 X X X X X X 57 CABLE RELEIF R-0010-258-1R 1 X X X X X X 58 CLAMP 1361-599-633R 1 X X X X X X 59 HOLE PLUG 1361-599-058R 1 X X X X X X 60 GAS SOLENOID 0972-423-005R 1 X X X X X X 61 TRANSFORMER T2 C-4244-374-2R 1 X X X X X X 62 CONTACTOR K1 1115-212-220R 1 X - - - - - CONTACTOR K1 1115-212-219R 1 - X X - X - CONTACTOR K1 1115-212-210R 1 - - - X - X 63 P.C. BOARD Y024-4R 1 X X X X X X 64 TERMINAL BLOCK X13 1131-990-005R 6 X - X - X - TERMINAL BLOCK X12, X13 1131-990-005R 9 - X - X - X65 STICKER (230/400V) R-0010-221-1R 1 - X - X - X66 PLATE D-2731-731-1R 1 - X - X - X 67 TERMINAL BLOCK X11 1361-599-255R 1 - X - X - X 68 CAPACITOR C1 1158-121-045R 1 - - X X X X 69 POWER LEAD D-5578-171-1R 1 X - X - X - POWER LEAD D-5578-171-2R 2 - X - X - X70 WORK LEAD K14011-1 1 X X - - - -WORK LEAD K14012-1 1 - - X X X XFigure F, G: Wire Drive Assembly – POWERTEC ® 255C & 305CItem Description Part NumberQTY1234567 WIRE DRIVE ASSEMBLY 0744-000-160R1 X X X X - - 71 FEED PLATE 0744-000-219R 1 X X X X - - 72 INLET GUIDE 0744-000-224R 1 X X X X - - 73 ADAPTER 0744-000-227R 1 X X X X - - 74 FIXING CAP 0744-000-216R 1 X X X X - - 75 METAL COVER 0744-000-218R 1 X X X X - - 76 PRESSURE ARM COMPL. 0744-000-221R 1 X X X X - - 77 SPRING PRESSURE ARM 0744-000-220R 1 X X X X - - 78 FIXING ARM COMPL.0744-000-223R1X X X X --WIRE DRIVE ASSEMBLY 0744-000-241R 1 - - - - X X 79 FEED PLATE 0646-233-002R 1 - - - - X X 80 INTERMEDIATE GUIDE 0646-233-023R 1 - - - - X X 81 INLET GUIDE 0646-233-025R 1 - - - - X X 82 LEFT PRESSURE ARM COMPLETE 0646-233-007R 1 - - - - X X 83 RIGHT PRESSURE ARM COMPLETE 0646-233-005R 1 - - - - X X 84 FIXING ARM COMPL. 0646-233-015R 2 - - - - X X 85 SPRING PRESSURE ARM 0646-233-013R 2 - - - - X X 86 AXIS PRESSURE ARM 0646-233-003R 2 - - - - X X 87 AXES OF DRIVE ROLL 0646-233-020R 2 - - - - X X 88 GEAR WHEEL MOTOR 0646-233-028R 1 - - - - X X 89 GEAR WHEELS ROOL 0646-231-090R 2 - - - - X X 90 COVER 0646-233-027R 1 - - - - X X 91 FIXING CAPS 0744-000-190R 2 - - - - X X92 MOTOR 0744-000-229R 1 X X X X - - MOTOR 1111-722-046R 1 - - - - X X 93 WOODROF KEY 0646-231-102R 1 X X X X X X 94 EURO SOCKET COMPLETE C-2985-006-2R 1 X X X X X X 95 OUTLET GUIDE D-1829-066-4R 1 X X X X X X 96 SLEEVES 1361-599-720R4 X X X X X X 97 SLEEVES 1361-599-565R 2 X X X X - - SLEEVESD-1869-033-3R 2 - - - - X X 98 STICKER2719-107-732R1 X X X X X XMiscellaneous Items (not shown in figure D, E, F, G)Item DescriptionPart Number QTY123456799 WIRING HARNESS (PRIMARY) R-5041-176-1R 1 - X - X - X100 WIRING HARNESS (PRIMARY) R-5041-176-2R 1 X - X - X - 101 WIRING HARNESS (SECONDARY) R-5041-177-1R 1 X X X X X X 102 WIRING HARNESS R-5041-185-1R 1 - - X X X X 103 WIRING HARNESSR-5041-186-1R1 X X - - - -Electrical SchematicRecycleSTF eA lC uB r a s sB o a r d sP l a s t i c sL i q u i d C r i s t a lE x t e r n a l E l e c t r i c C a b l e sC a p a c i t o r sDescription Ref. BASE 1 X WHEELS 2, 3 X X TRANSFORMERS 4, 59 X X X SUPPORT 5 X FAN 6 X X RECTIFIER 7 X CHOKE 8 X X RESISTOR 9 XSHIELD 10, 15, 21,25, 47XSHELF 11 X RUBBER CABLE BUSH 12, 13 X DIVIDER 14 X REEL HUB 16 X FUSE SOCKET 17 X FUSE CAP 18 X FUSE 19, 20 X SIDE PANEL 26, 31, 33 XSWITCHES 22, 23, 41,42, 43X X XKNOBS 24, 46 X LOCKS 34 X HINGLES 32 X REAR PANEL 27 X BRACKETS 28 X COVER 29 X EYE BOLTS 30 X POTENCIOMETERS 39 X GAS SOLENOID 58 X X X FRONT PANEL 40 X BLACK FLAME SHIELD 44 X WIRE DRIVE ASSEMBLY 35 X X X EURO SOCKET 36 X SLEEVES 37, 38 X LAMP 45 X X EURO SLEEVE 48 X SOCKETS 49 X X X P.C. BOARD 61 X TERMINAL BLOCK 50, 52 X X PLATE 51 X CAPACITOR 53 X FILTER RC 54 X X XCABLE RELEIF55 X CLAMP56 X HOLE PLUG57 X CONTACTOR 60 X X X POWER LEAD 62 X WORK LEAD 63 X。

SW6201规格书SW6201中文资料

SW6201的端子定义
引脚定义
详细列出SW6201设备每个引脚的名称和功能，包括电源引脚、信号输入输出引脚、控制引脚等。
参数说明
为每个引脚提供详细的参数说明，包括电压等级、电流承受能力、最大工作频率等。
典型连接
提供SW6201的典型连接示意图，展示如何连接电源、输入信号、输出信号、控制信号等。
输入信号接收 1
SW6201接收来自外部的输入信号
内部处理 2
信号经过内部处理电路的转换和放大
输出信号生成 3
产生最终的输出信号，传递给其他设备
SW6201内部包含一系列复杂的电路，例如放大器、滤波器和逻辑门等，这些电路共同作用，实现信号的接收、处理和输出。
SW6201的主要应用领域
工业自动化
SW6201在工业自动化中扮演着重要角色，可用于控制和监测各种机器设备。
系统集成
将SW6201集成到项目系统中，进行系统联调，确保系统正常运行。

SW6201的性能测试方法
静态测试
SW6201的静态测试主要包括参数测量，如静态电流，静态电压，以及输入输出特性曲线等，可以通过示波器、万用表等仪器进行测量。
动态测试
动态测试主要是指测试SW6201在不同负载情况下，其输出信号的变化情况，包括频率响应、失真度等参数测试，需要使用专业的测试仪器进行测量。
SW6201的推荐开发步骤
项目需求分析
仔细分析项目需求，确定SW6201的应用场景和功能需求，确保选择合适的参数配置。
硬件电路设计
根据项目需求，设计合适的硬件电路，选择合适的元器件，确保电路稳定可靠。
软件开发
开发与SW6201接口的软件程序，并进行调试，确保程序运行稳定，功能完整。

夏普M160M205零件手册中文_部分2

O第二纸盒给纸组件 (AR-M205)O第二纸盒给纸组件AR-RP6 MODEL目录为确保安全性、可靠性，更换部品务必使用正规品。

指定的部品。

本手册仅供维修人员进行售后服务用，本手册内容如有更改，恕不通告。

SHARP CORPORATION部　品　手　册1234■外观给纸组件输送组件包装及附属品索引数码复合机选购件双面原稿输送器（RSPF）1外观1外观3输送组件3输送组件4包装及附属品4包装及附属品AR-D24单层纸盒AR-D25双层纸盒MODEL目录为确保安全性、可靠性，更换部品务必使用正规品。

指定的部品。

本手册仅供维修人员进行售后服务用，本手册内容如有更改，恕不通告。

SHARP CORPORATION部　品　手　册123456■单层纸盒外观　（ＡＲ－Ｄ２４）单层纸盒给纸组件　（ＡＲ－Ｄ２４）双层纸盒外观　（ＡＲ－Ｄ２５）双层纸盒给纸组件　（ＡＲ－Ｄ２５）２５０页纸盒组件包装材料及附属品索引数码复合机选购件进纸组件1单层纸盒外观 (AR-D24)1单层纸盒外观 (AR-D24)2单层纸盒给纸组件 (AR-D24)2单层纸盒给纸组件 (AR-D24)4双层纸盒给纸组件 (AR-D25)4双层纸盒给纸组件 (AR-D25)5250页纸盒组件5250页纸盒组件6包装材料及附属品6包装材料及附属品■索引– 12 –COPYRIGHT © 2003 BY SHARP CORPORATION版权所有　翻印必究夏普办公设备（常熟）有限公司上海经营部中国上海浦东新金桥路２８号新金桥大厦１６０１室２００３年１０月中国印刷。

UM-QLP-1.5-6资料

rmation in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at , or contact your Hirose sales representative.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at , or contact your Hirose sales representative.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at , or contact your Hirose sales representative.