2.desktop_user's_guide_Chinese
甲骨文虚拟桌面客户端 2.0 用户指南说明书
2UDFOH 9LUWXDO 'HVNWRS &OLHQW 8VHU Guide6LPSOLILHG &KLQHVHFebruary 2011Oracle Virtual Desktop Client 2.0 User Guide - Simplified ChineseCopyright © 2011, Oracle and/or its affiliates. All rights reserved.This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.This software and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect tothird-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.Oracle Virtual Desktop Client 2.0 用户指南目录OVDC 简介关于 Oracle Virtual Desktop Client使用 OVDC连接到 Sun Ray 服务器与 Sun Ray 会话断开连接从命令行运行 OVDC命令行示例使用 Sun 快捷键OVDC 的限制常见问题解答我是否需要知道我的 Sun Ray 服务器的名称？是否可以通过虚拟专用网络连接？< /h2>如果无法连接到 Sun Ray 服务器，那会怎样？是否可以使用智能卡登录？< /h2>是否可以使用多个显示器？< /h2>如何在客户端计算机上播放和录制音频？< /h2>如何可以改善显示质量？< /h2>如何设置我的 Sun Ray 会话的显示大小？如何从全屏会话退出？< /h2>是否可以使用多个配置文件？< /h2>配置设置" 连接"选项卡" 网络"选项卡" 热键"选项卡" 记录"选项卡" 高级"选项卡" 关于"选项卡使用配置文件关于配置文件配置文件和日志文件创建新配置文件编辑配置文件覆盖配置文件设置从命令行创建新配置文件卸载 OVDC如何卸载 OVDCOVDC 简介关于 Oracle Virtual Desktop ClientOracle Virtual Desktop Client (OVDC) 是可安装在常见客户端操作系统上的应用程序。
投影仪快速设置指南说明书
Quick SetupBefore using the projector, make sure you read the safety instructions in the online User’s Guide .Note: Your product may differ from the illustrations on this sheet, but the instructions are the same.Connect the projectorChoose from the following connections. See the sections below or the online User’s Guide for details.Computer3.5 mm stereo mini cableComputer portConnect one end of a VGA cable to the projector’s Computer1 orport, and the other end to your laptop or connect an audio cable.HDMI portConnect one end of an HDMI cable to the projector’s HDMI1/MHL or HDMI2 ports and the other end to an HDMI port on your computer.USB portConnect the square end of a USB cable to the projector’s USB-B (square) port. Connect the flat end of the cable to any USB port on your computer.Windows Vista ® or later: After turning on the projector, follow the on-screen instructions to install the Epson ® USB Display software (EMP_UDSE.EXE ; only on first connection). If the software screen does not display automatically, open My Computer or Computer , then double-click EPSON_PJ_UD .OS X 10.7.x or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection).Video deviceConnect multiple video devices and use the Source Search button on theprojector or the remote control to switch between them.Mobile media deviceConnect tablets, smartphones, and other devices that support the MHL™ standard to the HDMI1/MHLport.Some devices may require an adapter or may not require an MHL cable. Not all features or functions may be supported. Check your device’s documentation for more information.HDBaseT ™ transmitter (PowerLite 2165W/2265U)Connect an HDBaseT transmitter to the HDBaseTport.Ethernet cableNote: Make sure the projector and HDBaseT transmitter are turned off when connecting or disconnecting the network cable between them.Camera, USB device, or document cameraConnect a digital camera, USB flash drive, USB storage device, or Epson DC-07 document camera to the projector’s USB-A(flat) port.If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector’s PC Free feature. You can also connect other Epson document cameras to the projector. See the online User’s Guide for details.External monitor and external speakersYou can also connect an external monitor and external speakers to your projector to enhance your presentations. See the online User’s Guide for details.Turn on your equipment1 Turn on your computer or video source.2Plug in the projector. The On/Standby light on the projector turns blue.3O pen the4 P ress the power button on the projector or remote control. Theprojector beeps, the Status light flashes blue, and then stays on.Note: To shut down the projector, press the power button twice.5 U se the arrow buttons on the remote control to highlight any of theoptions on the Home screen that appears, then press to select it.You can display a QR code, switch between projection sources, andquickly access various adjustment options from this screen.6 T he default language of the menu system is English. To select anotherlanguage, press the Menu button on the projector or remote control.Select Extended and press . Select Language and press . Selectyour language and press . Press the Menu button to exit the menusystem.Adjust the image1 I f you don’t see an image, press the Source Search button on theprojector or the remote control to select the image source.Note: If you still see a blank screen or have other display problems, seethe troubleshooting tips on the back of this sheet.2 TNote: You can also press the button on the projector tofine-tune your adjustments. See the online User’s Guide for details.5 Y our projector automatically adjusts images that are unevenly rectangular), but if necessary you can correctUser’s Guide for details.Using the remote controlInstall the batteries as shown (two AA batteries).Choose which sourceto displayTurn projectoron and offAccess projectormenusTurn off projectordisplayAccess the HomescreenNavigate projectormenusFor more information on using the remote control, see the online User’s Guide.Project wirelesslyFollow the steps here to install the included wireless LAN module and connectthe projector over a wireless network. With the PowerLite 2250U, you willneed the optional wireless LAN module (part number V12H731P02).If you’re projecting from a computer, it must have a wireless card or built-inwireless interface.1 Turn off the projector and unplug the power cord.2 Slide the air filter cover latch and open the air filter cover.3 R emove the screw securing the wireless LAN module stopper andremove the stopper.45Replace the wireless LAN module stopper and secure it using the screwyou removed.6 7 Plug in the power cord and turn on the projector.8 P ress the Menu button on the remote control, select the Networkmenu, and press.9 Choose Network Configuration and press .10Select the Wireless LAN menu and press .11 C hoose Connection Mode , press, select Quick (for a directconnection to a computer, tablet, or smartphone) or Advanced (for a connection to a router or access point), then press again. When you’re finished, press Esc to return to the Wireless LAN menu.12I f you chose the Advanced connection mode, select Search Access Point and press . Use the arrow buttons to highlight your networkname (SSID) in the list of available connections.13 I f your network has security enabled, enter your network password onthe screen that appears. Make sure to enter any uppercase or lowercase letters in the correct case.• To select a number or character, use the arrow buttons on the remote control to highlight it, then press . • To switch between uppercase and lowercase letters, select CAPS and press .• To change the displayed symbols, select SYM1 or SYM2 and press .When you’re finished entering the network password, select Finish and press .14 I f you chose the Advanced connection mode, select IP Settings andpress.If your network assigns addresses automatically, make sure DHCP is turned on. If not, turn off DHCP and enter the projector’s IP Address , Subnet Mask , and Gateway Address , as needed.15 T o prevent the SSID and IP address from appearing on the network standby screen, set the SSID Display and IP Address Display settings to Off .16 W hen you’re finished selecting settings in the Wireless LAN menu,press Esc .17 S elect Complete and press, then select Yes and press again tosave your settings.Install network softwareLinks to download the network software and to the manuals are availablefrom the projector CD. Downloads require an Internet connection. You can also download the software and manuals from the Epson website, as described in “Where to get help.”To monitor and control your projector over the network, install the EasyMP ® Monitor software (Windows ® only). To project from multiple PCs over the network, install the EasyMP Multi PC Projection software. To update your projector’s firmware over a wired LAN, install the EasyMP Network Updater software.Click the icons on your desktop to view the software manuals. See the manuals for instructions on installing and using the software.Project wirelessly from a mobile deviceYou can connect your mobile device and projector using Epson iProjection™ and a QR code. Make sure the latest version of Epson iProjection is installed on your device.Install the Epson iProjection appTo project from an iOS or Android™ device, download and install the Epson iProjection app. Visit /projectorapp (U.S.) orwww.epson.ca/projectorapp (Canada) for more information.Direct wireless connectionMake sure your device and Epson projector are not connected to a network and your Epson projector’s Connection Mode is set to Quick .1 P ress the Home button on the projector or remote control to bring up the Home screen.2 Select Display the QR Code and press.3TapiProjection on your device’s Home screen.4Tap Read QR code .5 Point your device’s camera at the QR code your projector displays; the QR code is read automatically.6If you are using an iOS device, follow the on-screen prompts to register your projector’s Wi-Fi profile.Your device and Epson projector are now connected.Wireless network connectionMake sure your projector and mobile device are connected to the same wireless network.1 Press the Home button on the projector or remote control to bring up the Home screen.2 S elect Display the QR Code and press .3TapiProjectionon your device’s Home screen.4 Tap Read QR code .5Point your device’s camera at the QR code your projector displays; the QR code is read automatically.Your device and Epson projector are now connected.TroubleshootingIf you see a blank screen or the No signal message after turning on your computer or video device, check the following:• M ake sure the Status light on the projector is blue and not flashing, andthe A/V Mute slide is open.• P ress the Source Search button on the projector or the remote controlto switch to the correct image source, if necessary.•Press the Home button on the projector or remote control to verify the source input and settings.• O n Windows 7 or later, hold down the Windows key and press P at thesame time, then click Duplicate .• If you’re using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.• I f you’re using a Mac laptop, open System Preferences and selectDisplays . Click the Arrangement tab and select the Mirror Displays checkbox.Where to get helpManualsFor more information about using the projector, click the icons on yourdesktop to access the online manuals (requires an Internet connection). If you don’t see icons to the manuals, you can install them from the projector CD or go to the Epson website, as described below.Telephone support servicesTo use the Epson PrivateLine ® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 AM to 8 PM , Pacific Time, Monday through Friday, and 7 AM to 4 PM , Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.Internet supportVisit /support (U.S.) or www.epson.ca/support(Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson.RegistrationRegister today to get product updates and exclusive offers. You can use the CD included with your projector or register online at /webreg.EPSON, EasyMP , and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.Android is a trademark of Google Inc.HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.This information is subject to change without notice.© 2016 Epson America, Inc., 10/16CPD-52404R1Optional accessoriesFor a list of optional accessories, see the online User’s Guide .You can purchase screens or other accessories from an Epson authorizedreseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at (U.S. sales) or www.epson.ca (Canadian sales).。
IBM SPSS Statistics Version 28 授权用户许可管理员指南说明书
To push to the local desktops running Windows
Because IBM SPSS Statistics installations are compatible with Microsoft Windows Installer (MSI), you can push an installation to the end-user desktop computers.
elasticsearch-guide-chinese elasticsearch中文指南
Table of Contents1. 开发指南i. 开始i. 基本概念ii. 安装iii. 操作集群iv. 修改数据v. 操作数据ii. 文档APIi. 索引APIiii. 搜索APIi. 搜索ii. URI搜索iii. 请求体(request body)搜索iv. 搜索模板v. 搜索分片APIvi. 聚合(aggregations)vii. facetsviii. 启发者(suggesters)ix. 多搜索APIx. 计数APIxi. 搜索存在(search exist)APIxii. 验证APIxiii. 解释APIxiv. 过滤器(percolator)xv. more like this apiiv. java APIi. 客户端ii. 索引APIiii. 获取APIiv. 删除APIv. 更新APIvi. bulk APIvii. 查询APIviii. 计数APIix. 基于查询的删除APIx. facets2. 例子3. es vs solr4. elasticsearch river jdbcelasticsearch-guide开发指南开始基本概念安装操作集群修改数据操作数据文档API索引API搜索API搜索URI搜索请求体(request body)搜索搜索模板搜索分片API聚合(aggregations)facets启发者(suggesters)多搜索API计数API搜索存在(search exist)API验证API解释API过滤器(percolator)more like this apijava API客户端索引API获取API删除API更新APIbulk API查询API计数API基于查询的删除APIfacets例子es vs solrelasticsearch river jdbcElasticsearch是一个高可扩展的、开源的全文本搜索和分析工具。
它允许你以近实时的方式快速存储、搜索、分析大容量的数据。
如何将桌面路径中文改成英文(Desktop)
如何将桌面路径中文改成英文(Desktop
我们在使用电脑时一般都会把系统安装到C盘,而很多的桌面图标也随之产生在C盘,当桌面文件越来越多是,不仅影响开机速度,同时我们的电脑会很卡;当系统崩溃需要重装电脑时,我们总是要通过各种办法备份桌面。
如果我们把桌面路径改到其他盘符,这些烦恼就不复存在了,接下来,我们就一起看看如何设置吧。
第一步:首先我们通过快捷键“Win+R”来打开“运行”菜单。
如何更改桌面文件路径三联
打开开始运行命令框
第二步:在打开“运行”菜单后,我们输入“regedit”打开注册表。
如何更改桌面文件路径
输入regedit打开注册表编辑器
第三步:打开注册表后,依次找到展开HKEY_CURRENT_USER--〉Software--〉Microsoft--〉Windows--〉CurrentVersion--〉Explorer--〉user Shell Folders。
如何更改桌面文件路径
注册表中找到user Shell Folders设置
第四步:在窗口右边找到在窗口的右边找到字符串值名“Desktop”,将其值修改为预设好的路径。
(如:我想把桌面放在“D盘-桌面”的文件夹,将其值修改为:“D:桌面”即可。
如何更改桌面文件路径
设置Desktop桌面文件的路径
第五步:最后我们把电脑注销或重启即可完成设置。
COMSOL Nonlinear Structural Materials Module User’
Nonlinear Structural Materials ModuleUser’s GuideC o n t a c t I n f o r m a t i o nVisit the Contact COMSOL page at /contact to submit general inquiries or search for an address and phone number. You can also visit the Worldwide Sales Offices page at /contact/offices for address and contact information.If you need to contact Support, an online request form is located on the COMSOL Access page at /support/case . Other useful links include:•Support Center: /support•Product Download: /product-download•Product Updates: /support/updates•COMSOL Blog: /blogs•Discussion Forum: /forum•Events: /events•COMSOL Video Gallery: /videos•Support Knowledge Base: /support/knowledgebase Part number: CM022901N o n l i n e a r S t r u c t u r a l M a t e r i a l s M o d u l e U s e r ’s G u i d e © 1998–2022 COMSOLProtected by patents listed on /patents , or see Help>About COMSOL Multiphysics on the File menu in the COMSOL Desktop for a less detailed lists of U.S. Patents that may apply. Patents pending.This Documentation and the Programs described herein are furnished under the COMSOL Software License Agreement (/sla ) and may be used or copied only under the terms of the license agreement.COMSOL, the COMSOL logo, COMSOL Multiphysics, COMSOL Desktop, COMSOL Compiler, COMSOL Server, and LiveLink are either registered trademarks or trademarks of COMSOL AB. All other trademarks are the property of their respective owners, and COMSOL AB and its subsidiaries and products are not affiliated with, endorsed by, sponsored by, or supported by those trademark owners. For a list of such trademark owners, see /trademarks .Version: COMSOL 6.1The Nonlinear Structural Materials ModuleThe Nonlinear Structural Materials Module is an optional add-on package forCOMSOL Multiphysics® designed to assist you to model structural behavior thatincludes nonlinear materials. The module is an add-on to the Structural MechanicsModule or the MEMS Module and extends it with support for modeling nonlinearmaterials, including hyperelasticity, creep, plasticity, and viscoplasticity. The module isdesigned for researchers, engineers, developers, teachers, and students who want tosimulate nonlinear structural materials, including a full range of possible multiphysicscouplings.The module provides an extensive set of nonlinear structural material models,including:•Predefined and user-defined hyperelastic materials: neo-Hookean, Mooney–Rivlin,St.Venant–Kirchhoff, Arruda–Boyce, Ogden, and others.•Small-strain and large-strain plasticity models using different types of hardening.•User-defined plasticity, flow rule, and hardening models.•Porous plasticity models, used for example for powder compaction simulation.•Predefined and user-defined nonlinear elastic materials: Ramberg–Osgood, Powerlaw, and others.•Shape memory alloys.•Predefined and user-defined creep material models: Norton, Garofalo, Anand,potential, volumetric, deviatoric, and others.•Viscoplastic models: Anand, Chaboche, and Perzyna.•Models for damage in brittle materials.A C C E S S I N G T H E N O N L I N E A R S T R U C T U R A L M A T E R I A L S D O C U M E N T A T I O NThis is an add-on module requiring either the Structural Mechanics Module or theMEMS Module. The feature information, including theory and modeling details, isincluded in the Structural Mechanics Module User’s Guide.When you install COMSOL Multiphysics, the documentation sets are installed inseveral locations, both on your computer and most easily accessible while you areworking in COMSOL Multiphysics. The next section details where to access it.T H E N O N L I N E A R S T R U C T U R A L M A T E R I A L S M O D U L E|34 | T H E N O N L I N E A R S T R U C T U R A L M A T E R I A L S M O D U L EA C C E S S I N G C O M S O L D O C U M E N T A T I O N A N D A P P L I C A T I O N L IB R A R I E SA number of online resources have more information about COMSOL, including licensing and technical information. The electronic documentation, topic-based (or context-based) help, and the Application Libraries are all accessed through the COMSOL Desktop.T H E D O C U M E N T A T I O N A N D O N L I N E H E L PThe COMSOL Multiphysics Reference Manual describes the core physics interfaces and functionality included with the COMSOL Multiphysics license. This book also has instructions on how to use COMSOL Multiphysics and how to access the electronic Documentation and Help content.Opening Topic-Based HelpThe Help window is useful as it is connected to the features in the COMSOL Desktop. To learn more about a node in the Model Builder, or a window on the Desktop, click to highlight a node or window, then press F1 to open the Help window, which thendisplays information about that feature (or click a node in the Model Builder followedby the Help button (). This is called topic-based (or context) help .If you are reading the documentation as a PDF file on your computer,the blue links do not work to open an application or contentreferenced in a different guide. However, if you are using the Helpsystem in COMSOL Multiphysics, these links work to open othermodules, application examples, and documentation sets.().In the upper-right corner of the COMSOL Desktop, click the ()T H E N O N L I N E A R S T R U C T U R A L M A T E R I A L S M O D U L E | 5Opening the Documentation WindowT H E A P P L I C A T I O N L I B R A R I E S W I N D O W Each model or application includes documentation with the theoretical background and step-by-step instructions to create a model or application. The models andapplications are available in COMSOL Multiphysics as MPH-files that you can open for further investigation. You can use the step-by-step instructions and the actual models as templates for your own modeling. In most models, SI units are used to describe the relevant properties, parameters, and dimensions, but other unit systems are available.Once the Application Libraries window is opened, you can search by name or browse under a module folder name. Click to view a summary of the model or application and its properties, including options to open it or its associated PDF document. () button.Help>Help .(). () button.Help>Documentation.The Application Libraries Window in the COMSOL MultiphysicsReference Manual .6 | T H E N O N L I N E A R S T R U C T U R A L M A T E R I A L S M O D U L E Opening the Application Libraries WindowTo open the Application Libraries window ():C O N T A C T I N G C O M S O L B Y E M A I LForgeneralproductinformation,******************************.C O M S O L A C C E S S A ND TE C H N I C A L S U P P O R TTo receive technical support from COMSOL for the COMSOL products, please contact your local COMSOL representative or send your questions to******************.Anautomaticnotificationandacasenumberwillbesenttoyou by email. You can also access technical support, software updates, license information, and other resources by registering for a COMSOL Access account.menu, select () select ()C O M S O L O N L I N E R E S O U R C E SCOMSOL website Contact COMSOL /contactCOMSOL Access /accessSupport Center /supportProduct Download /product-downloadProduct Updates /support/updatesCOMSOL Blog /blogsDiscussion Forum /forumEvents /eventsCOMSOL Application Gallery /modelsCOMSOL Video Gallery /videoSupport Knowledge Base /support/knowledgebaseT H E N O N L I N E A R S T R U C T U R A L M A T E R I A L S M O D U L E|78|T H E N O N L I N E A R S T R U C T U R A L M A T E R I A L S M O D U L E。
五年级英语电器品牌练习题30题
五年级英语电器品牌练习题30题1<背景文章>Apple is a very famous brand in the world. It was founded by Steve Jobs, Steve Wozniak, and Ronald Wayne in 1976. Apple is known for its innovative products. One of its most popular products is the iPhone. The iPhone is a smartphone that has changed the way people communicate and access information. Another popular product is the iPad. The iPad is a tablet computer that is great for entertainment and productivity. Apple products are known for their sleek design, user-friendly interface, and high quality.1. Apple was founded in ______.A. 1975B. 1976C. 1977D. 1978答案：B。
解析：文章中明确提到Apple was founded by Steve Jobs, Steve Wozniak, and Ronald Wayne in 1976.2. One of Apple's most popular products is ______.A. the laptopB. the iPhoneC. the cameraD. the TV答案：B。
解析：文中提到One of its most popular products is the iPhone.3. The iPad is a ______.A. smartphoneB. laptopC. tablet computerD. desktop computer答案：C。
EFLOW用户指南 Release 12.3说明书
Path
:
Online
: True
RestartNeeded : False
2. Set execution policy and verify.
Set-ExecutionPolicy -ExecutionPolicy AllSigned -Force
Get-ExecutionPolicy AllSigned
5
EFLOW User's Guide, Release 12.3
3. Download and install EFLOW.
$msiPath = $([io.Path]::Combine($env:TEMP, 'AzureIoTEdge.msi')) $ProgressPreference = 'SilentlyContinue' Invoke-WebRequest "https:∕∕aka.ms∕AzEFLOWMSI_1_4_LTS_X64" -OutFile $msiPath
▶ The Windows host OS with virtualization enabled ▶ A Linux virtual machine ▶ IoT Edge Runtime ▶ IoT Edge Modules, or otherwise any docker-compatible containerized application (runs on
戴尔易安信系统管理工具和文档9.0.1版安装指南说明书
Dell EMC Systems Management Tools And Documentation Version 9.0.1Installation Guide1Notes, cautions, and warningsA NOTE indicates important information that helps you make better use of your product.A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid theA WARNING indicates a potential for property damage, personal injury, or death.Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.1 About (4)Managed system and management station (4)Systems Management Tools and Documentation software (4)DTK Deprecation Message (6)2 Installing management station software on Microsoft Windows (7)Installing management station software on Microsoft Windows Server and Hyper-V Server (7)Installing management station software using the CLI mode (7)Uninstalling management station software using the CLI mode (8)3 Installing management station software on supported Red Hat Enterprise Linux, Novell SUSELinux Enterprise Server, and VMware ESXi Server (9)Contents31About The Systems Management Tools and Documentation Installation Guide provides an overview of the management station software and installation instructions for the same. For information on installing Server Administrator, see the Dell EMC Server Administrator Installation Guide in the Dell EMC Systems Management Tools and Documentation software.Systems Management softwareThe systems management image comprises of the three software's mentioned below:•Systems Management Tools and Documentation•Server Updates•Management ConsoleYou can download the free ISO image of the software's from /support.Topics:•Managed system and management station•Systems Management Tools and Documentation softwareManaged system and management stationDepending on the way you use the systems management tools, you can classify the systems as:•Managed SystemA managed system is any system that is monitored and managed using Server Administrator or Management Console. A ServerAdministrator is one of the systems management tools on the Systems Management Tools and Documentation software. You can manage systems running Server Administrator locally or remotely through a supported web browser. For more information on Server Administrator, see the Server Administrator User's Guide on the Systems Management Tools and Documentation software.•Management StationA management station is a laptop, desktop, or server that you use to remotely manage one or more managed systems from a centrallocation. You can use tools such as:○Intelligent Platform Management Interface (IPMI) Utilities○Remote Access Controller (RAC) tools○Dell EMC OpenManage Essentials or Server Administrator Web ServerSystems Management Tools and Documentation softwareThe Systems Management Tools and Documentation comprises of the systems management software. The systems management software helps you to manage the systems by monitoring the system components, diagnosing issues, notifying through alerts, and troubleshooting remotely. Systems management software is classified into managed system software and management station software.Managed system softwareThe following applications include the managed system software:4About•Server AdministratorServer Administrator provides comprehensive one-to-one in-band server managements solutions to manage a server locally and remotely using a web browser-based Graphical User Interface (GUI) and Command Line Interface (CLI). Server Administrator installs server-specific Remote Access Card (RAC) and network interface management components.•Local Remote Access ControllerLocal Remote Access Controller enables the system to receive email alerts for warnings or errors related to voltage, temperature, and fan speed. Remote Access Controller also logs event data and the most recent crash screen (available only on systems running Microsoft Windows operating system) to help you diagnose the probable cause of a system crash. Management station softwareThe following applications include the management station software that you can install using the Systems Management Tools and Documentation software:•Active Directory Snap-InThe Active Directory (AD) Snap-In utility provides an extension snap-in to the Microsoft Active Directory to manage AD objects specific to products in this software.•BMC/IPMI UtilitiesBMC Management Utility (BMU) is a utility that provides remote management and configuration of systems equipped with aBaseboard Management Controller (BMC) or iDRAC using the IPMI protocol. IPMI utilities are CLI-based management station software.For more information on BMU, see the Baseboard Management Controller Utilities User's Guide•RAC ToolsThe RAC console is a management station software designed to provide remote management capabilities for the systems. You can remotely connect to the RAC hardware and access the RAC features either by using a web browser or the RACADM Command Line Interface (CLI). RACADM CLI is the command-line user interface to the RAC.You can install RAC either on the managed system or on the management station.For information on installing RAC on the managed system, see the Server Administrator Installation Guide. For information on installing on the management station, see Installing Management Station Software on Windows. For more information on RAC, see the Remote Access Controller User's Guide.•Dell Lifecycle ControllerIt is recommended to use the Embedded Management, Integrated Dell Remote Access Controller 8 (iDRAC8) with Lifecycle Controller instead of the Systems Build and Update Utility (SBUU). SBUU is replaced with Lifecycle Controller on the 13th generation ofPowerEdge servers. iDRAC with Lifecycle Controller is an Embedded Systems Management application for operating systemdeployment and lifecycle management of PowerEdge servers. You can access Dell Lifecycle Controller by pressing <F10> during system boot up. The local GUI of iDRAC8 with Lifecycle Controller allows you to do the following in a pre-OS environment:○Hardware configuration○Operating system and hypervisor deployments○Hardware updates○Hardware diagnostics○Easy maintenance of PowerEdge serversThe Dell Lifecycle Controller is embedded on all the 11th generation and later PowerEdge servers. No tools or downloads are required to use the capabilities of Lifecycle Controller.For more information, see the following documents available at /support/manuals:○Dell Lifecycle Controller Version <Version Number> User's Guide○Dell Lifecycle Controller Remote Services Version <Version Number> Quick Start Guide○Dell Lifecycle Controller Web Services Interface Guide○Dell Lifecycle Controller Integration Best Practices•Dell EMC OpenManage EssentialsIt is recommended to use Dell EMC OpenManage Essentials as replacement for IT Assistant. Dell EMC OpenManage Essentials (OME) provide improved capabilities such as:○Discovering and inventorying the systems.○Monitoring systems’ health.○Viewing and managing system alerts.About5○Performing system updates.○Viewing hardware inventory and compliance reports.For more information regarding Dell EMC OpenManage Essentials, contact service provider.•iDRAC Service ModuleThe iDRAC Service Module is a lightweight optional software application that can be installed on all the 12th generation and later PowerEdge servers. Using the iDRAC Service Module you can configure the features on the supported operating system. The iDRAC Service Module provides additional Server Management data to iDRAC and presents one-to-many consoles with access to Systems Management data through OS interfaces.The iDRAC Service Module also complements the iDRAC interfaces such as the GUI, RACADM CLI, and WSMAN with additional monitoring features. For more information, see iDRAC Service Module <Version Number> Installation Guide available at / support/home.•Dell EMC OpenManage Deployment Toolkit (DTK)The Dell EMC OpenManage Deployment Toolkit (DTK) includes a set of utilities, sample scripts, and sample configuration files that you can use to deploy and configure the systems. You can use DTK to build script-based and RPM-based installation for deploying large number of systems on a pre-operating system environment in a reliable way, without changing their current deployment processes.Using DTK you can install the operating system in the BIOS or Unified Extensible Firmware Interface (UEFI) mode.In addition to the command-line utilities used to configure various system features, DTK also provides sample scripts and configuration files to perform common deployment tasks and documentation. These files and scripts describe the use of the DTK in Microsoft Windows Pre-installation Environment (Windows PE) and Linux environments. For more information, see the following documents available at /openmanagemanuals:○Dell EMC OpenManage Deployment Toolkit Version <Version Number> User's Guide○Dell EMC OpenManage Deployment Toolkit Version <Version Number> Command Line Interface Reference Guide○Dell EMC OpenManage Deployment Toolkit Version <Version Number> Installation GuideDTK Deprecation MessageThe OpenManage Deployment Toolkit (DTK) along with the associated tools and capabilities will be deprecated for version 6.0.1 and later:•Redundant Array of Independent Disks Configuration (RAIDCFG) Utility•System Configuration (SYSCFG) Utility•ELI tool•Utility Partition (UPINIT)It is recommended to use the RACADM Command Line (CLI) as a replacement for the RAIDCFG and SYSCFG utilities. For more information on downloading RACADM, see .DTK will continue to support any new hardware or operating system for the 14th generation of PowerEdge6AboutInstalling management station software onMicrosoft Windows1.Log on with administrator privileges to the system on which you want to install the management station applications.2.Insert the Systems Management Tools and Documentation DVD into the DVD drive or download the web installer.You can download the web installer from /support/home.3.Run autorun.exe .If you are using the DVD to install, select the management station application that you want to install, and 4.Follow the instructions in the Install Wizard.You cannot install remote RAC (RAC installed on the management station) and local RAC (RAC installed on Topics:•Installing management station software on Microsoft Windows Server and Hyper-V ServerInstalling management station software onMicrosoft Windows Server and Hyper-V ServerWindows Server or Hyper-V Server operating system does not support a graphical user interface (GUI) based installation of the software components. Install the software in CLI mode on Server Core. For more information on Server Core, see the Microsoft website.Log in as a built-in Administrator to install systems management software on Windows Server and Windows Installing management station software using the CLImodeRun the Command Prompt as an administrator to successfully perform tasks using the CLI mode.To install the RAC Tools, launch the MSI file using the command:•msiexec /i RACTools_x64.msiOn the Systems Management Tools and Documentation software:The RACTools_x64.msi file is located at SYSMGMT\ManagementStation\windows\DRACx64To install BMU, launch the MSI file using the command:msiexec /i BMC.msiThe BMC.msi file is located at SYSMGMT\ManagementStation\windows\BMC on the Systems Management software.To install Active Directory Snap-In, launch the MSI file using the command:•msiexec /i ADSnapIn_x64.msi2Installing management station software on Microsoft Windows 7On the Systems Management Tools and Documentation software:The ADSnapIn_x64.msi file is located at SYSMGMT\ManagementStation\windows\ADSnapInx64To install the localized version of the management station software, at the command prompt type the following: msiexec / I<management_station_software>.msi TRANSFORMS= <languauge_transform>.mstReplace <language_transform>.mst with the appropriate language file:1031.mst (German)1034.mst (Spanish)1036.mst (French)1041.mst (Japanese)2052.mst (Simplified Chinese)Uninstalling management station software using the CLI modeTo uninstall management station software, run the commands as listed in the table below.Table 1. Commands to uninstall management station softwareManagement Station Software CommandRAC Tools msiexec /x RACTools_x64.msi(or)msiexec /x {5BFAC585-F1C8-41AA-9416-0F86873B478C}BMC (32 bit)msiexec /x BMC.msi(or)msiexec /x {8FF0F765-4FB1-46DD-B978-C76165CFDCE0}Active Directory Snap-In msiexec /x ADSnapIn_x64.msi(or)msiexec /x {E3B775A8-118A-4786-9EB1-F3BBE09F8A37}Systems Management msiexec /x SysMgmt_.msi(or)msiexec /x {826996FB-E97F-44BE-BC09-7B2EAFDA739B}8Installing management station software on Microsoft Windows3 Installing management station software onsupported Red Hat Enterprise Linux, NovellSUSE Linux Enterprise Server, and VMwareESXi Server Only RAC tools and BMU are supported on the Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and VMware ESXi Serveroperating systems.On systems running Red Hat Enterprise Linux operating system, DVDs are auto-mounted with the -noexec mount option. This option does not allow you to run any executable from the DVD. You must mount the DVD-ROM manually and then run the executables.To install BMU, navigate to the SYSMGMT/ManagementStation/linux/bmc directory and install the BMU RPM specific to the operating system as follows:•For systems running Red Hat Enterprise Linux, type rpm -ivh osabmcutil*-RHEL-*.rpm•For systems running SUSE Linux Enterprise Server, type rpm -ivh osabmcutil*-SUSE-*.rpmTo install the latest version of RAC Tools:1.Uninstall the existing IPMI tool:a.Query the existing IPMI tool: rpm -qa | grep ipmitoolIf the IPMI tool is already installed, the query returns ipmitool-x.x.xx-x.x.xx.b.To uninstall the IPMI tool:•On systems running SUSE Linux Enterprise Server and VMware ESXi Server, type rpm -e ipmitool-x.x.xx-x.x.xx•On systems running Red Hat Enterprise Linux 6.x, type rpm –e ipmitool•On systems running Red Hat Enterprise Linux 7.x, type rpm –e OpenIPMI-tools2.SYSMGMT/ManagementStation/linux/rac/<OS> directory and then type rpm -ivh *.rpm9 Installing management station software on supported Red Hat Enterprise Linux, Novell SUSE Linux Enterprise Server, andVMware ESXi Server。
诺德智能平板电脑用户手册说明书
PhilipsLCD monitor17"SXGA170B7CSExtremely convenient displayfor business usersWith SmartManage LAN-based remote monitor management, Philips Perfect Panel™warranty and a full range of convenient features, the 170B7 delivers great and convenientdisplay at a very attractive total cost of ownership.Best total cost of ownership solution•Empowered for Windows Vista•SmartManage compatibility enables LAN-based asset management•Power consumption below the industry averageOutstanding front of screen performance•ISO 13406-2 Class I compliant dot-defect-free display•5ms fast response time•SXGA 1280 x 1024 resolution for sharper display•Dual input accepts both analogue VGA and digital DVI signalsMaximum comfort for maximum productivity•Tilt, swivel and height-adjust for an ideal viewing positionGreat convenience•USB port for convenient peripheral connections•Easy to adjust display settings with Philips SmartControl•Built-in speakers for audio without desktop clutterHighlightsWindows Vista readyPhilips Vista-ready monitors are empowered for vibrant, exciting display of this new, visually sophisticated and demanding Windows operating system, designed to enhance your entertainment experience, make you more productive and help you control your computing experience at home and in the office, making viewing, finding and organising information for work or play quick, efficient and easy.SmartManage enabledSmartManage is a system for monitoring, managing and checking status of display devices as well as delivering remote support to users who experience difficulties - all accomplished over a LAN.Lower power consumptionReduction of the electrical power required to operate a device.PerfectPanel™Bright dots and dark dots are defects in a LCD panel. While some manufacturers still consider bright and dark defects in a LCD panel an inevitable part of the manufacturing process, Philips doesn't. Philips monitors, compliant with ISO 13406-2 Class I standard, areproduced with zero tolerance for LCD paneldefects and backed by Philips PerfectPanel™globally valid warranty providing repair orreplacement of any LCD monitors that displayeven a single defective bright or dark dot.5ms on/off response timeOn-Off response time is the period requiredfor a liquid crystal cell to go from active (black)to inactive (white) and back to active (black)again. It is measured in milliseconds. Faster isbetter: Lower response time means fastertransitions and, therefore, results in fewervisible image artefacts in the display oftransition of texts and graphics. On-Offresponse time is a more important measure inthe display of business content like documents,graphs and photos.Dual inputDual input provides connectors toaccommodate input of both analogue VGA anddigital DVI signals.Compact Ergo BaseThe Compact Ergo Base is a 'people friendly'Philips monitor base that tilts, swivels andheight adjusts so each user can position themonitor for maximum viewing comfort andefficiency.USB 2.0 portThe universal serial bus or USB is a standardprotocol for linking PCs and peripherals.Because it delivers high speed at a low cost,USB has become the most popular method forconnecting peripheral devices to a computer.A port located on a monitor directly in theuser's line of sight provides easy, high-speedconnectivity for USB devices at a convenientlocation. (USB 2.0 support is dependent onyour PC's USB configuration; when connectedto a PC that supports USB 2.0, your monitor isUSB 2.0 compatible)SmartControlPC software for fine tuning displayperformance and settings. Philips offers userstwo choices for display setting adjustment.Either navigate the multilevel On ScreenDisplay menu through buttons on the displayitself or use the Philips SmartControl softwareto easily adjust the various display settings in afamiliar way.Built-in speakersAudio speakers built into a display device.Issue date 2011-11-26 Version: 8.0.1412 NC: 8639 000 16888 EAN: 87 10895 95626 0© 2011 Koninklijke Philips Electronics N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. SpecificationsPicture/Display•LCD panel type: 1280 x 1024 pixels, Anti-glare polarizer, RGB vertical stripe•Panel Size: 17"/ 43 cm•Effective viewing area: 337.9 x 270.3 mm •Pixel pitch: 0.264 x 0.264 mm •Brightness: 300 cd/m²•Contrast ratio (typical): 800:1•Display colours: 16.7 M•Viewing angle: 176º (H) / 170º (V), @ C/R > 5•Response time (typical): 5 ms•White Chromaticity, 6500K: x = 0.313 / y = 0.329•White Chromaticity, 9300K: x = 0.283 / y = 0.297•Maximum Resolution: 1280 x 1024 @ 75 Hz (digital input)•Recommended Resolution: 1280 x 1024 @ 60 Hz (digital input)•Video Dot Rate: 140 MHz•Horizontal Scanning Frequency: 30 - 83 kHz •Vertical Scanning Frequency: 56 - 76 Hz •sRGBConnectivity•Signal Input: Analogue (VGA), DVI-D, PC Audio in •Audio output: Stereo Audio (3.5 mm jack) 1x •USB: 1 x USB 2.0•Video Sync Input Signal: Composite Sync, Separate Sync, Sync on Green•Video input impedance: 75 ohm•Sync input impedance: 2.2k ohm•Video input signal levels: 0.7 Vpp Convenience•Built-in Audio: 2 W RMS x 2 Stereo Speakers •Convenience Enhancements: On-screen Display, SmartManage enabled•Monitor Controls: Auto, Brightness Control (Up/ Down), Left/Right, Menu (OK), Power On/Off, Volume control•OSD Languages: English, French, German, Italian, Russian, Spanish•Other convenience: Kensington lock compatible, FlexiHolder•Plug & Play Compatibility: DDC/CI, sRGB, Windows 98/ME/2000/XP/Vista •Regulatory Approvals: CE Mark, EMC, Energy Star, FCC-B, UL, CSA, SEMKO, TCO '03, TÜV/GS,TÜV Ergo•Swivel:+/-60°•Tilt: -5° to 25°•VESA Mount: 100 x 100 mmAccessories•Included Accessories: AC Power Cord, Audio Cable, USB cable, VGA cable•Optional accessories: Super Ergo Base•User ManualDimensions•Box dimensions(W x H x D):449 x 182 x 452 mm•Box dimensions in inch (W x H x D):17.7 x 7.2 x 17.8 inch•Set dimensions(W x H x D):382.5 x 342.8 x 61.5 mm•Set dimensions in inch (W x H x D):15.1 x 13.5 x 2.4 inch•Set dimensions with stand (W x H x D):382.5 x 387.2 x 198.7 mm•Set dimensions with stand in inch (W x H x D): 15.1 x 15.2 x 7.8 inch•Height adjustment range: 60 mm•Height adjustment range (inch): 2.4 inch •MTBF: 50,000 hrs•Relative Humidity: 20% - 80%•Temperature range (operation): 5°C to 40°C •Temperature range (storage): -20°C to 60°C •Product weight (+stand): 5.2 kg•Product weight (+stand) (lb): 11.5 lb•Weight incl. Packaging: 6.5 kg•Weight incl. Packaging (lb): 14.3 lbPower•Complies with: Energy Star •Consumption: 33W (Typical)•Off Mode: < 1 W•Power LED indicator: Operation - green, Stand by/ sleep - Amber•Power supply: Built-in, 100-240VAC, 50/60Hz。
JT2Go Desktop 用户常见问题解答说明书
JT2Go Desktop - Frequently Asked QuestionsContentsJT2Go Desktop - Frequently Asked Questions (1)What is JT2Go Desktop? (2)What is JT? (2)What features are included in JT2Go Desktop? (2)How can I get help with questions on JT2Go Desktop, is there GTAC support? (2)How can I create JT files of my own? (2)I like working with JT. How can I get more functionality? (2)My JT file is supposed to have PMI in it. How do I display it? (3)How are JT2Go and JT Open related? (3)Can I have JT2Go Desktop and Teamcenter/Teamcenter Visualization installed on the same computer? (3)Can JT2Go Desktop access data managed by Teamcenter? (3)Can I send JT2Go Desktop to someone else? (3)Do I need to upgrade my graphics card to use JT2Go Desktop? (3)Do I need to have Administrator rights to install JT2Go Desktop? (4)Does JT2Go Desktop support "Silent Installs" or installs from a command line? (4)What is PLM XML? How is it used by JT2Go Desktop? (4)Can JT2Go Desktop read session files with markups created in Teamcenter Visualization products? (4)Can JT2Go Desktop read Parasoild files? (4)Can I control the initial display of JT content in JT2Go Desktop? (5)How can I get updates for JT2Go? (5)When the auto update occurs, how can I tell what has changed in the new release? (5)Can JT2Go be embedded in a web page? (5)Can I insert JT files into Microsoft Office documents using JT2Go? (5)What is JT plus PDF? (5)What is JT2Go Desktop?JT2Go Desktop is a viewing application for 3D JT files. Siemens Digital Industries Software provides JT2Go to the global community at no charge. JT2Go Desktop is available on Microsoft Windows Desktop and can be downloaded from or the Windows 10 store. JT2Go Mobile is available for the iOS and Android platforms. JT2Go Mobile has a subset of features available in JT2Go Desktop. For a description of features included with JT2Go Desktop see What Features are Included .Return to table of contentsWhat is JT?JT is an industry focused, high-performance, lightweight, flexible file format for capturing and repurposing 3D data that enables collaboration, validation and visualization throughout a Model Based Enterprise. JT has been accepted by ISO as IS 14306 and is the international standard file format for 3D visualization and collaboration.Return to table of contentsWhat features are included in JT2Go Desktop?A list of available features is provided on the JT2Go website in this document: What Features are IncludedReturn to table of contentsHow can I get help with questions on JT2Go Desktop, is there GTAC support?JT2Go is a no cost product and is not supported by Siemens Digital Industries Software’s Global Technical Access Center (GTAC). Users can access the JT2go Forum to share issues and request input on functionality. JT2Go is not a meant to be a replacement for Teamcenter Visualization, users should refer to What Features are Included for a list of supported capabilities.There is a way to obtain GTAC support for JT2Go. As part of their JT Open Program membership, JT Open Program members are able to log calls with GTAC on JT2Go. To join the JT Open Program contact your Siemens Digital Industries Software Sales Executive or visit our website to request assistance.Return to table of contentsHow can I create JT files of my own?Nearly all major CAD systems offer the option to create 3D JT data either directly or through 3rd party translation software integrations. For a list of vendors that support JT in their products visit the JT Open Program website.Return to table of contentsI like working with JT. How can I get more functionality?Siemens Digital Industries Software offers a comprehensive suite of Visualization, Digital Mockup and Virtual Reality products. Teamcenter Visualization capabilities enable everyone in the product lifecycle to access and collaborate on rich 3D design data.Return to table of contentsMy JT file is supposed to have PMI in it. How do I display it?Product Manufacturing Information in JT files is organized by Model Views.To access Model Views with JT2Go select the “Model Views” icon in the Project Workspace window. When the Model View gallery is visible in Project Workspace, select the “Find” icon. This will search the JT file for existing Model Views and display them in a pallet. See the JT2Go documentation for settings that control how Model Views are searched for and displayed.The Model View Gallery was added to JT2Go with the 11.2 release.Return to table of contentsHow are JT2Go and JT Open related?JT Open is a reference to The JT Open Program. The JT Open Program is made up of likeminded corporations and software vendors who have adopted 3D JT data in their workflows and products. The JT Open Program’s charter is to drive JT adoption globally and ensure JT continues to be successful and relevant for industry.JT2Go was developed by Siemens Digital Industries Software at the request of JT Open Program members. For more information on the JT Open Program visit their website at .Return to table of contentsCan I have JT2Go Desktop and Teamcenter/Teamcenter Visualization installed on the same computer?Yes, JT2Go was designed to work in harmony with Teamcenter and Teamcenter Visualization products.Return to table of contentsCan JT2Go Desktop access data managed by Teamcenter?No, JT2Go Desktop is not designed to access data managed by Teamcenter.Return to table of contentsCan I send JT2Go Desktop to someone else?The JT2Go Desktop license agreement prohibits redistribution of the JT2Go installation (.exe) download file. However, JT2Go does provide an option to “Tell a Friend” about JT2Go. “Tell a Friend” makes it easy to send your friend or colleague a link to the JT2Go download site. To access this feature select Help/Support/Email a Friend from JT2Go RibbonReturn to table of contentsDo I need to upgrade my graphics card to use JT2Go Desktop?It may be necessary to upgrade your graphics card driver, new drivers can be obtained from the graphics card vendor. Upgrading the graphic card itself will depend upon user performance requirements.Information on JT2Go Desktop system requirements can be found here System RequirementsReturn to table of contentsDo I need to have Administrator rights to install JT2Go Desktop?Installing JT2Go requires the same level of user account access as is required to install any application to a given device.Return to table of contentsDoes JT2Go Desktop support "Silent Installs" or installs from a command line?Yes, silent installs are supported by JT2Go Desktop. A script is provided on that describes the silent install options. To use this script, simply uncomment the options that meet your install requirements. The JT2Go Silent install script can be found here Silent Install Script.Return to table of contentsWhat is PLM XML? How is it used by JT2Go Desktop?PLM XML is a W3C compliant XML schema created by Siemens Digital Industries Software to facilitate product lifecycle interoperability by sharing high-content product data between PLM applications. PLM XML schemas are available at no charge from the PLM XML website.JT2Go Desktop can open and display PLM XML files create with Siemens Digital Industries Software’d Teamcenter Visualization products. A PLM XML file saved from Teamcenter Visualization preserves all supported content from the active 3D Viewing window. JT2Go also supports merging a saved PLM XML product structure into a JT2Go session.Return to table of contentsCan JT2Go Desktop read session files with markups created in Teamcenter Visualization products?Yes. Teamcenter Visualization products, like Vis Mockup, save markups to a session file. JT2Go can read Vis session data when saved as .vf or .vfz (compressed session files) files.Return to table of contentsCan JT2Go Desktop read Parasoild files?Yes. Read support for Parasolid .xt, .xb, .xmt_bin, and .xmt_txt files is added with the JT2Go 13.3 release.Return to table of contentsCan I control the initial display of JT content in JT2Go Desktop?Yes. When a JT file is loaded into JT2Go all parts are displayed by default. Users who load large models may wish to have just the product structure loaded to decrease load time. To change this setting, from the Ribbon select JT2Go/Loaded Parts on. The button is a toggle, a white background means the toggle is off. JT2Go must be restarted to activate the setting. Once set it will stay active with the last choice made.Return to table of contentsHow can I get updates for JT2Go?JT2Go has an auto update feature. Once installed JT2Go will automatically update when a new release is available from . Auto update is turned on by default. Users can turn auto update off by deselecting “Auto Update” in the Help/Support dialog on the Ribbon.Return to table of contentsWhen the auto update occurs, how can I tell what has changed in the new release?As JT2Go loads, users will be notified through a pop up window when a new release is available. After the option to update is accepted a new dialog will appear to initiate the download of the updated version. This dialog also displays what is new in the version being installed.Return to table of contentsCan JT2Go be embedded in a web page?No, embedding JT2Go into a web page is not supported.Return to table of contentsCan I insert JT files into Microsoft Office documents using JT2Go?No, early versions of JT2Go had an Office integration that allowed this but Microsoft removed support for this type of integration with Office 365.Return to table of contentsWhat is JT plus PDF?JT plus PDF is an innovative way to work with JT and PDF together. A JT plus PDF file is a PDF file that has an attached JT file with links in the PDF text to; model views, PMI and product structure entries. Users can open the PDF directly into JT2Go Desktop and navigate through the 3D JT content using the PDF links. For more functionality, users can install the JT plus PDF Acrobat reader plugin which automatically loads JT2Go Desktop when a PDF with an attached JT files is opened.JT plus PDF Technical Data Packages can be authored using NX’s Technical Data Package solutions. The NX Technical Data Package offering supports generation of JT plus PDF packages utilizing a template driven workflow.Users can also create JT plus PDF documents manually working with JT2Go and Word to build documents that have URI links to PMI, Model Views and Geometry. To complete the workflow export the Word content as.pdf and attach the JT file to the .pdf using JT2Go’s Attach JT feature. To attach JT to PDF documents, from the JT2Go Ribbon select JT2Go/Attach JT. Loading this PDF into JT2Go will open both the PDF file and the JT file in the same session. Users can then navigate the JT content through the URI links in the PDF file.Return to table of contents。
Media Base 安裝指南
Observe the following safe-handling guidelines to ensure personal safety:
• When setting up the device for work, place it on a level surface.
About Your Media Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Left View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Right View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Back View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Abbreviations and Acronyms
For a complete list of abbreviations and acronyms, see the Dell™ Latitude™ D420 User’s Guide (depending on your operating system, double-click the User’s Guide icon on your desktop, or click the Start button, → Help and Support, → User and system guides, → User’s guides, and then click Dell Latitude User’s Guide).
GRAPHISOFT BIMx Desktop Viewer User Guide
GRAPHISOFT BIMx Desktop Viewer User GuideGRAPHISOFT®Visit the GRAPHISOFT website at for local distributor and product availabilityinformation.GRAPHISOFT BIMx Desktop Viewer User GuideCopyright © 2019 by GRAPHISOFT, all rights reserved. Reproduction, paraphrasing or translation without express prior written permission is strictly prohibited.TrademarksARCHICAD® is a registered trademark of GRAPHISOFT.All other trademarks are the property of their respective holders.ContentsIntroduction ________________________________________________________4 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Start BIMx Desktop Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 BIMx Desktop Viewer Menu Commands __________________________________5 FILE Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SETTINGS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Render Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Stereo View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 View Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Mouse Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Mouse Invert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Additional Settings commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 LAYERS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 GALLERY Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 CONTROLS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 INFO Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Components of Video RAM Usage on Mobile Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 BIMx Navigation Tools and Shortcuts ___________________________________13 Fly Mode vs. Walk Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Info Tool (Legacy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Map Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Measure Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Screenshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Parallel View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Quit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14IntroductionUsing GRAPHISOFT BIMx Desktop Viewer (BIMx), you can explore the 3D building models created with GRAPHISOFT ARCHICAD in an interactive way.BIMx Desktop Viewer is available free from here:/products/bim-explorer/downloads.htmlBIMx provides real-time 3D navigation in an architectural design – enhanced with gravity, layer control, fly-mode, egress recognition and pre-saved walk-throughs - for the ultimate design exploration of 3D model content.Element information, such as surface finishes, volumes, sizes and quantities, can also be displayed with a click of the mouse. Exact measurements can be taken during the real-time walkthrough to help design decisions and forecast cost-related design issues.ARCHICAD projects can be published as BIMx models (*.bimx) using either a wizard or the Publisher function.See the ARCHICAD Reference Guide for more information.Free BIMx models are available on the GRAPHISOFT BIMx Site: The BIMx Quick Reference Card gives you a quick overview of the application’s keyboard shortcuts. You can download this PDF file from this web page:/products/bim-explorer/downloads.htmlSystem RequirementsFor system requirements, see /support/bimx/system_requirements/. Start BIMx Desktop ViewerDouble-click the BIMx Desktop Viewer icon to start the application.If you have a BIMx model file, double-click it to open it in BIMx Desktop Viewer.See the following sections for information on using BIMx Desktop Viewer:BIMx Desktop Viewer Menu CommandsBIMx Navigation Tools and ShortcutsBIMx Desktop Viewer Menu Commands•Double-click the BIMx model to open it in the viewer, or use the File > Open command from the BIMx menu.•To access the BIMx menu, press the ESC key.•To return to the navigation window, press ESC again.•To switch full-screen mode on and off on Windows, use F11.Choosing among Menu Options1.Click and hold on the option you want to change.2.The available choices will then pop up.3.Move your cursor over the options.4.When the cursor is on the desired option, let go of the cursor to enable that option. Editing Numerical SettingsIf the setting you are editing is a numerical value (such as navigation speed), you can change the value only by dragging the mouse left (to decrease the value) or right (to increase it.) You cannot enter the values directly.FILE MenuClick Open to browse for a BIMx model (*.bimx).Project displays the path and name of the opened model.After you open a BIMx model, click Browse Hyper-model to choose from multiple 3D views and camera positions, if the model contains them.Choose one, then click Open 3D Model to open it in BIMx Desktop Viewer. SETTINGS MenuThe Settings dialog stores all the parameters that are related to the BIMx model display and navigation control.Render ModeChoose a Render Mode to display the BIMx model.•Headlight: View the scene as if there were a lamp on your head•Global Illumination: Available for models that were calculated using Global Illumination. •Black and White: Available for models that were calculated using Global Illumination, but only GI lightmaps will be visible, for a grayscale image.•Simple Shading: Basic lighting with materials and contours.•Unlit: Shows materials with ambient lighting only. You can add detail by turning on SSAO.•Gouraud: Shows materials with simple lighting•Metal: Similar to Headlight, but omits materials•Hidden Line: No shading. Displays the contours of scene geometry.Some of these methods may not be available, depending on the graphics card you are using. Tips for Choosing a Render Mode•The Global Illumination method gives you the most realistic view of the model. To access it, Global Illumination must have been calculated for the model.Note: The Black and White (Global Illumination) render option is also available for models calculated with Global Illumination.•Headlight mode is a simpler rendering method compared to Global Illumination , but it is available on all devices (with the possible exception of extremely old computers).•On very old-model computers (provided they meet the minimum system requirements), the Gouraud,Unlit and Global Illumination (provided that it was calculated) render modes are guaranteed to be available.BackgroundBIMx offers the following background options for the screen:•SKYBOX (default BIMx Sky image)•WHITE•GREY•BLACK•GRADIENTTo use custom skybox images, you have to replace the six .tga files included in the BIMx Desktop Viewer/Data/Textures/Skybox folder.Stereo ViewBIMx can display the model in stereo view modes. The following methods are available:•Left/Right•RED/ CYANNote: You need special stereo view glasses to enjoy this BIMx feature.•Quad Buffer: available only with NVIDIA drivers.•OFFNote: Stereo View options are not available if you are in Parallel view. (Click F8 to toggle Parallel view.)SSAOTurn on the SSAO effect (Screen Space Ambient Occlusion) on to give greater depth to the scene. Effective when used in conjunction with the Unlit Render mode. While not as sophisticated as Global Illumination, the effect is similar, without needing the precalculation process.Notes:–SSAO is only available if your graphics card supports the OpenGL 2.0 standard. Typically, older-model laptops cannot benefit from this feature.–SSAO is not yet available on mobile devices due to hardware limitations.View ConeValue range: 10-120SpeedValue range: 10-1000This parameter defines the default speed of navigation. Higher numbers result in faster movement.Note that you can temporary increase the navigation speed by holding down the SHIFT key. Mouse SensitivityValue range: 10-50Mouse InvertThis option inverts the mouse navigation directions.UnitsThe measured distances can be displayed in Metric or Imperial units.By default, the model is displayed according to the default unit settings of your computer. Additional Settings commandsThe following parameters are available if you have turned on Shadows (click F3). The parameter value limits are shown in parentheses.Sun Altitude (10-80)Sun Azimuth (0-360)Sun Brightness (-100 - +100)Sun Filtering: Turn on to improve quality of sun shadows.Camera Height (600-2000)Camera Radius (150-400)Help PopupsIf this option is activated, a help popup window will appear over some of the Settings menu’s commands. Also, an introductory help popup is shown on screen when you open a BIMx model.LAYERS MenuThe BIMx project preserves the layers of the original ARCHICAD model. Use the BIMx Layers menu to control the visibility of the model layers, by checking the desired layer name boxes. GALLERY MenuThe Gallery menu includes the commands with which you can view pre-recorded walk-through clips.•PLAY ON IDLE will make playback start or continue “screensaver-style” - that is, after a certain amount of idle time.•Clips will playback in sequence if SEQUENCER is enabled (click “Sequencer” to enable it), otherwise only the current clip will be played.Gallery Shortcuts•Click the image to jump into that position or to play that clip.•Press P to playback the current clip.•Press Shift+P to playback the sequence of clips from the top.CONTROLS MenuThe CONTROLS menu displays the list of the basic navigation commands and their shortcuts for the international keyboard. Most of these functions are self-explanatory and commonly used in first-person shooter computer games (FPS).For additional navigation shortcuts, see BIMx Navigation Tools and Shortcuts.INFO MenuThe Info Menu shows basic information about the active project and your BIMx license:•Version: The version and build number of your BIMx application.•License Type: Type of your BIMx license (full, educational). It also displays whether you are using the global illumination version of BIMx.FunctionsKeyboard ShortcutMenuESCAPEMovement W, S, A, D and the Arrow keys Move Fast SHIFT Move Slow CMD or CTRL Crouch C Jump SPACE BAR Lift PAGE UP Lower PAGE DOWN Fly Mode F Info Tool I Measure Tool M Outlines O Sun Shadows F3Screenshot F5Parallel View F8Map ModeBACKSPACE•Source Model: The name of the ARCHICAD file saved to BIMx.•Number of Triangles: The models in BIMx are made of 3D triangles. The speed of the 3D navigation and the memory usage by the BIMx application are strongly affected by the number of triangles in the 3D model. Please note that this value is approximately two or three times that of the polygon count displayed in PolyCount add-on in ARCHICAD, due to the different geometry calculation algorithms used.•RAM Usage: Displays the size of the RAM, in bytes, used by the project•Video RAM Usage: Displays the size of the Video RAM, in bytes, used by the project•Check for Updates: Click this command to see whether an updated version of GRAPHISOFT BIMx Desktop Viewer is available.•BIMx Online Help: Takes you to a Help file.Components of Video RAM Usage on Mobile Devices This data refers to the Video RAM memory required to view the model on the supported iOS mobile devices.•Geometry: Based on the triangle count.•Textures: The BIMx application for mobile devices automatically optimizes your textures to a certain degree, but if your BIMx model is too large to be run on your mobile device, you can try to reduce their size and complexity.If the BIMx model was saved using Global Illumination, additional video RAM memory is required to handle the following two texture components:•Global Illumination of Flat Surfaces: the illumination texture applied to flat surfaces; and •Global Illumination of Curved Surfaces: the illumination texture applied to curved surfaces You will notice that curved surfaces are less memory-intensive than the flat surfaces.BIMx Navigation Tools and Shortcuts Note: The BIMx Quick Reference Card gives you a quick overview of the application’s keyboard shortcuts. Please download the desired language version of the PDF file from this web page: /products/bim-explorer/downloads.htmlFly Mode vs. Walk ModeThe F key toggles between Fly Mode and Walk Mode. The Walk Mode provides you with a more realistic viewing experience including the following features:•Opening recognition to distinguish the solid building structures such as walls, columns and roofs from doors and windows during navigation.•Gravity to keep the camera height stable over slabs, ramps or stairs.•Holding down SHIFT and CONTROL at the same time will activate the light speed navigation, which is ten times faster than running.•Holding down the right mouse button while flying will make you stay on a fixed altitude. This is useful when recording a fly-over above a building, for example.•Holding down the right mouse button while walking will lock the view horizontally for a perfectly straight perspective.Info Tool (Legacy)Note: Info Tool is available for BIMx Desktop Viewer only if you are exploring a BIMx model published from ARCHICAD versions 16-21, using the “Legacy” Info Set option at Publishing Properties. This option is not available with ARCHICAD 22 and later.Pressing I during navigation activates the Info Tool. In this mode, the cursor’s shape changes to a cross and the bounding box of the currently selected model element is highlighted. One click with the mouse opens the Info palette, which shows basic information about the selected model element. The following information is displayed in the Info Tool:•Type – Element Type (e.g. Wall, Slab)•ID•Layer – Layer of the element in the ARCHICAD model•Element parameters, as applicable – e.g. height, width, thickness, volume, structure (if composite), slant, area, pitch. These values are taken from the ARCHICAD model element parameters.•Library Part Name (as applicable)•Tags (inasmuch as the element has values filled out for these tags) - e.g. Position, Structural FunctionNote: These Info Tool data are only available if you are exploring a BIMx model saved from ARCHICAD 16 or later. (BIMx models saved from earlier ARCHICAD versions show only a limited set of these data.)Map ModeThis useful feature helps you to find your current position in the building during navigation. Press BACKSPACE during navigation to project the corresponding section of the floor plan over the current 3D view. Your current position and viewing direction is marked with an arrow. Use the mouse wheel to zoom the map.Measure ToolPress M to enable the measure tool. The three-dimensional distance from the camera to the world point at the center is computed and displayed as View Distance. To measure the distance between two three-dimensional points, click the left mouse button and pick two points. The resulting distance is computed and displayed as Measured Distance.ScreenshotPress F5 to print the current view to a .png file. The image will have the same resolution as your current BIMx screenshot. The .png file will be saved with a unique name into theBIMx\Screenshots\ folder, located in your Users\User Name\ Documents folder. Parallel ViewPress F8 to enable the parallel view. Use the mouse to rotate the model and the mouse wheel to zoom in/out. Hold down the right mouse button and move the mouse to pan over the model.Note: Stereo View options (Settings menu) are not supported in Parallel view.QuitHold down Z, then press ESC to quit.。
戴尔显示器管理器用户指南.pdf_1700852576.4495707说明书
Dell S2422HZ/S2722DZ Video Conferencing Monitor Dell Display Manager User’s GuideMonitor Model: S2422HZ/S2722DZRegulatory Model: S2422HZt/S2722DZtNOTE: A NOTE indicates important information that helps you makebetter use of your computer.Copyright © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.2021 – 08Rev. A00ContentsOverview (4)Using the Quick Settings dialog box (5)Setting basic display functions (6)Assigning Preset Modes to applications (7)Organizing Windows with Easy Arrange (8)Managing multiple video inputs (10)Restoring application positions (11)Applying energy conservation features (12)Defining shortcut keys (13)Attaching DDM to active window (Windows 10 only) (14)Troubleshooting (15)Contents | 34 | Overview OverviewDell Display Manager is a Microsoft Windows application used to manage a monitor or a group of monitors. enables you to manually adjust the displayed image, assign automatic settings, energy management, window organization, image rotation, and other features on selected Dell monitors. After installation, Dell Display Manager runs each time when the computer starts and places its icon in the notification tray. For more information about monitors connected to the computer, move the pointer over the notification-tray icon.Dell S2422HZ/S2722DZ - StandardNOTE: Dell Display Manager uses DDC/CI channel to communicate with your monitor. Ensure DDC/CI is enabled in the menu as shown in thefollowing image.Using the Quick Settings dialog boxClick the Dell Display Manager’s notification tray icon. The Quick Settings dialog box is displayed. When more than one supported Dell monitor is connected to the computer, a specific target monitor can be selected using the menu. The Quick Settings dialog box enables you to easily adjust the brightness, contrast, resolution, window layout, and so on. It also enables you to switch between preset modes automatically or to select a preset mode manually.Dell S2422HZ/S2722DZ1920x1080/2560x1440The Quick Settings dialog box also provides access to Dell Display Manager’s advanced user interface (UI) that is used to adjust basic functions, configure auto mode, and access other features.Feature Function DescriptionQuick DDM access Shortcut key toopen DDM UICtrl+Shift+DControlindividualdisplay inmultipledisplay setup• Select the monitor from the drop-down list. Ifmore than one monitor is connected to yourcomputer, an icon appears on the selected moni-tor for a second to indicate which monitor youhave selected.• Perform monitor self-test feature check.• Move DDM UI to the monitor to be controlled.• Press Ctrl+Shift+D to open the miniUI under themouse pointer.Using the Quick Settings dialog box |5Setting basic display functionsYou can select Manual Mode that enables you to manually select a preset mode or select Auto Mode that applies a preset mode based on the active application. An on-screen message displays the current preset mode whenever it changes. The selected display’s Brightness and Contrast can also be directly adjusted from the Basic tab.Dell S2422HZ/S2722DZ1920x1080/2560x1440NOTE: When multiple Dell monitors are connected, select Enable display matrix control to apply brightness, contrast, and color presets controls to all monitors.Dell S2422HZ/S2722DZ1920x1080/2560x14406| Setting basic display functionsAssigning Preset Modes to applicationsThe Auto Mode tab enables you to select a specific Preset Mode with a specific application, and apply it automatically. When Auto Mode is enabled, Dell Display Manager automatically switches to the corresponding Preset Mode whenever the selected application is activated. The Preset Mode assigned to a particular application may be the same on each connected monitor, or it can vary from one monitor to another.Dell Display Manager is pre-configured for many popular applications. T o add a new application to the Application list, drag the application from the desktop, Windows Start Menu, or elsewhere, and drop it onto the current list.NOTE: Preset Mode assignments for batch files, scripts, loaders, and non-executable files such as zip archives or packed files, are not supported. You can also configure the game preset mode to be used whenever a Direct3D application runs in full-screen mode. To prevent an application from using mode, assign a different preset mode to it.Dell S2422HZ/S2722DZAssigning Preset Modes to applications |7Organizing Windows with Easy ArrangeEasy Arrange helps you to effectively organize your application windows on the desktop. Choose a pre-defined layout pattern, which suits your work, then drag the application windows into the defined zones. Press > or use Page Up or Page Down key to find more layouts. To create a custom layout, arrange the open windows, and then click Save .Dell S2422HZ/S2722DZFor Windows 10, you can apply different window layouts for each of the virtual desktops.If you often use Windows snap feature, select Hold down the SHIFT key to enable zone positioning. This feature gives Windows snap priority over Easy Arrange. You can hold down the Shift key to use Easy Arrange positioning.Dell S2422HZ/S2722DZ8| Organizing Windows with Easy ArrangeIf you are using multiple similar monitors in an array or matrix, Easy Arrange layout can be applied across to all the monitors as one desktop. Select Span multiple monitors to enable this feature. You must align your monitors properly to make it effective.Dell S2422HZ/S2722DZThe following table describes the addtional features of Easy Arrange.Feature Function DescriptionEnhanced Easy Arrange Custom layouts• Save and name five customized Easy Arrangepatterns.• Configure x*y patterns.Six MostRecently Used(MRU) layoutsPress Ctrl+Shift+Home to toggle between the lastsix MRU layouts.On the fly parti-tion resizing• Press the Ctrl key while resizing the current EasyArrange layout to adjust the size and number ofcells in a layout.• Newly formed Easy Arrange pattern is saved intothe Easy Arrange icon position.• Press the Ctrl key while clicking on a modified lay-out icon to restore it to the default layout.Easy Arrangelayouts forportrait modePortrait mode Easy Arrange icons are displayed-when monitor is rotated.NOTE: An application may require a minimum effective resolution for its application window. Such application may not fit in an Easy Arrange zone if the zone is smaller than the required window size.Organizing Windows with Easy Arrange |9Managing multiple video inputsThe Input Manager tab provides convenient ways to manage multiple video inputs connected to your Dell monitor. It enables you to easily switch between inputs while you are working with multiple computers.All video input ports available on your monitor are listed. Name each input as per your requirement and save changes after editing.You can define a shortcut key to quickly switch to your favorite input and another shortcut key to quickly switch between two inputs if you often work between them.Dell S2422HZ/S2722DZUSB-CHDMIUSB-CUSB-CYou can use the drop-down list to switch to any input source.Dell S2422HZ/S2722DZUSB-CHDMIUSB-CNOTE: Dell Display Manager communicates with your monitor even when the monitor is displaying video from another computer. You can installDDM on the computer you frequently use and control input switching from it. You can also install DDM on other computers connected to the monitor. 10| Managing multiple video inputsRestoring application positions | 11Restoring application positionsDDM can help you restore application windows into their positions when you reconnect your computer to the monitor(s). Right-click the DDM icon on the notification tray toquickly access this feature.If you select Auto-restore window layout , your application windows’ positions are tracked and remembered by DDM. DDM automatically puts the application windows into their original positions when you reconnect your computer to your monitor(s).T o go back to a favorite layout, select Save current window layout , and then Restore saved window layout .You can use monitors with different models or resolutions in your daily routine, and you can apply different window layouts on them. DDM recognizes the monitor you have reconnected and restores the application positions accordingly.If you want to replace a monitor in a monitor matrix configuration, you can save the window layout before replacement and restore the layout after a new display is installed.NOTE: You must keep your applications running to use this feature. DDM does not launch applications.Applying energy conservation featuresThe Options tab on supported Dell models provide PowerNap energy conservation options. You can set the brightness to the minimum level, or put the display to sleep when the screensaver is activated.Dell S2422HZ/S2722DZ12| Applying energy conservation featuresDefining shortcut keysYou can define the shortcut keys for quick access to the following DDM functions:• Program shortcut key: To quickly open the Quick Settings dialog box.• Easy Arrange MRU shortcut key: To quickly apply six recently used window layouts.• Application window shortcut key: To launch a quick menu for options under Auto Mode and Easy Arrange .Dell S2422HZ/S2722DZDefining shortcut keys |13Attaching DDM to active window (Windows 10 only)DDM icon can be attached to an active window you are working on. Click the icon for easy access to the following features.Feature Function DescriptionAttach DDM to active window (Windows 10 only)Change preset orsnap to differentpartitionsDDM icon can be attached to an active window and youcan easily switch the window position, change color presetmode, and assign auto preset mode.Shortcut keytriggerOn a running application window, press Ctrl+Shift+Insert totrigger the attached DDM menu.Move app windowamong Easy Ar-range cellsSend the app window to previous/next Easy Arrange cell.Move application-window amongmonitorsSend the application window to previous or next monitor.14| Attaching DDM to active window (Windows 10 only)Troubleshooting | 15TroubleshootingIf DDM does not work with your monitor, the following icon is displayed in thenotification tray.Click the icon; DDM shows a more detailed error message.NOTE: DDM works only with Dell-branded monitors. Dell Display Manager does not support monitors from any other manufacturer.If DDM is unable to detect and/or communicate with a supported Dell monitor, perform the following:1. Ensure that the video cable is properly connected to your monitor and your computer. The connectors must be firmly inserted into position.2. Check the monitor OSD to ensure DDC/CI is enabled.3. Ensure that you have the correct and latest Graphics driver from the graphics vendor (Intel, AMD, NVidia, and so on). Graphics driver is often the cause of DDM failure.4. Remove any docking stations, cable extenders, or converters between the monitor and the graphics port. Some low-cost extenders, hubs, or converters may not support DDC/CI properly and can fail DDM. Update the driver to the latest version available.5. Restart your computer.DDM might not work with the following monitors:• Dell monitor models earlier than year 2013 and D-series of Dell monitors. For more information, see https:///support/monitors.• Gaming monitors using Nvidia-based G-sync technology.• Virtual and wireless monitors do not support DDC/CI.• Some early models of DP 1.2 monitors. It may be necessary to disable MST/DP1.2 using the display OSD.If your computer is connected to the Internet, you are prompted to upgrade to a newer version of DDM when it is available. It is recommended to download and install the latest DDM application.Right-click the DDM icon to check the latest DDM version.16| Troubleshooting。
Dell Display Manager User's Guide
Model: S2421HN/S2421NX/S2721HN/S2721NXRegulatory model: S2421Ht/S2721HtDell S2421HN/S2421NX/S2721HN/S2721NXDell Display ManagerUser’s GuideNOTE: A NOTE indicates important information that helps you make better use ofyour computer.Copyright © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. 2020 – 07Rev. X00ContentsOverview (4)Using the Quick Settings Dialog (5)Setting Basic Display Functions (7)Assigning Preset Modes to Applications (9)Organizing Windows with Easy Arrange (11)Managing Multiple Video Inputs (15)Restoring Application Positions (17)Applying Energy Conservation Features (18)Other Shortcut Keys (19)Attach DDM To Active Window (Only Windows 10) (20)Troubleshooting (21)|3Contents |OverviewDell Display Manager is a Microsoft Windows application used to manage a display or a group of displays. It enables manual adjustment of the displayed image, assignment of automatic settings, energy management, window organization, image rotation, and other features on selected Dell displays. After installed, Dell Display Manager runs each time the system starts and places its icon in the notification tray. Information about displays connected to the system is available when hovering over the notification-tray icon.Dell S2421HN/S2421NX - StandardS2421HN/S2421NXDell S2721HN/S2721NX - StandardS2721HN/S2721NXNOTE: Dell Display Manager uses DDC/CI channel to communicate with yourdisplay. Ensure that DDC/CI is enabled in the menu as below.4| OverviewUsing the Quick Settings DialogClicking Dell Display Manager’s notification tray icon to open the Quick Settings dialog box. When more than one supported Dell displays are connected to the computer, a specific target display can be selected using the menu. The Quick Settings dialog box enables convenient adjustment of the display’s brightness, contrast, resolution, window layout, and so on. You can select Manual Mode or Auto Mode , and the screen resolution can be changed.Dell S2421HN/S2421NXS2421HN/S2421NXUsing the Quick Settings Dialog |5Dell S2721HN/S2721NXS2721HN/S2721NXThe Quick Settings dialog box also provides access to Dell Display Manager’s advanced user interface that is used to adjust basic functions, configure auto mode and access other features.NOTE:Feature Function DescriptionQuick DDM Access Quick key tocall up DDM UI• Ctrl+Shift+D• Use Page Up/Page Down key or click on “>” to flipthrough all Easy Arrange layouts.Controlindividualdisplay inmultipledisplay setup• From dropdown box to select display, selected displayhas Dell logo shown.• Perform display self-test feature check.• Move DDM UI to the display to be controlled.• Press Ctrl+Shift+D to bring up the miniUI under themouse pointer.6| Using the Quick Settings DialogSetting Basic Display FunctionsYou can select Manual Mode that enables you to manually select a preset mode or select Auto Mode that applies a preset mode based on the active application. An on-screen message displays the current preset mode whenever it changes. The selected display’s Brightness and Contrast can also be directly adjusted from the Basic tab.Dell S2421HN/S2421NXS2421HN/S2421NXDell S2721HN/S2721NXS2721HN/S2721NXNOTE: When multiple Dell displays are connected, select “Enable display matrix control” to apply brightness, contrast and color presets controls to all displays.Setting Basic Display Functions |7Dell S2421HN/S2421NXS2421HN/S2421NXDell S2721HN/S2721NXS2721HN/S2721NX8| Setting Basic Display FunctionsAssigning Preset Modes to ApplicationsThe Auto Mode tab allows you to associate a specific Preset Mode with a specific application, and apply it automatically. When Auto Mode is enabled, Dell Display Manager automatically switches to the corresponding Preset Mode whenever the associated application is activated. The Preset Mode assigned to a particular application may be the same on each connected display, or it can vary from one display to another.Dell Display Manager is pre-configured for many popular applications. T o add a new application to the assignment list, simply drag the application from the desktop, Windows Start Menu, or elsewhere, and drop it onto the current list.NOTE: Preset Mode assignments for batch files, scripts, loaders, and non-executable files such as zip archives or packed files, are not supported.You can also configure the Game preset mode to be used whenever a Direct3D application runs in full-screen mode. T o prevent an application from using mode, assign a different preset mode to it.Dell S2421HN/S2421NXS2421HN/S2421NXAssigning Preset Modes to Applications |9Dell S2721HN/S2721NXS2721HN/S2721NX10| Assigning Preset Modes to ApplicationsOrganizing Windows with Easy ArrangeEasy Arrange helps you to effectively organize your application windows on the desktop. You first choose a pre-defined layout pattern which suits your work, then you just need to drag the application windows into the defined zones. Press “>” or use Page Up/Page Down key to find more layouts. T o create a custom layout, arrange the open windows and then click Save .Dell S2421HN/S2421NXS2421HN/S2421NXDell S2721HN/S2721NXS2721HN/S2721NXOrganizing Windows with Easy Arrange |11For Windows 10, you can apply different window layouts for each of the virtual desktops.If you often use Windows snap feature, you can select “Hold down the SHIFT key to enable zone positioning”. This gives Windows snap priority over Easy Arrange. You will then need to press the Shift key to use Easy Arrange positioning.Dell S2421HN/S2421NXS2421HN/S2421NXDell S2721HN/S2721NXS2721HN/S2721NX12| Organizing Windows with Easy ArrangeIf you are using multiple displays in an array or matrix, Easy Arrange layout can be applied across to all the displays as one desktop. Select “Span multiple monitors” to enable this feature. You need to align your displays properly to make it effective.Dell S2421HN/S2421NXS2421HN/S2421NXDell S2721HN/S2721NXS2721HN/S2721NXOrganizing Windows with Easy Arrange |13There are other advanced ways for the usage of Easy Arrange. Refer to table below. Feature Function DescriptionEnhanced Easy Arrange Custom layouts• Save and name 5 customized Easy Arrange patterns.• Configure x*y patterns.5 MRU (most-recently-used)layouts• Press Ctrl+Shift+Home to cycle among the last 5 MRUlayouts.On the fly parti-tion resizing• Hold down Ctrl while resizing current Easy Arrangelayout to adjust the size and numbers of cells in alayout.• Newly formed Easy Arrange pattern is saved into theEasy Arrange icon position.• Hold down Ctrl while clicking on a modified layout iconto restore it to default layout.Easy Arrangelayouts forportrait mode• Portrait mode Easy Arrange icons are presented whendisplay is rotated.NOTE: Some application requires a minimum effective resolution for its window.The application may not fit in an Easy Arrange zone if the zone is smaller than the required window size.14| Organizing Windows with Easy ArrangeManaging Multiple Video InputsThe Input Manager tab provides convenient ways for you to manage multiple video inputs connected to your Dell display. It makes it very easy to switch between inputs while you work with multiple computers.All video input ports available to your display are listed. You can give each input a name as you like. Please save your changes after editing.You can define a shortcut key to quickly switch to your favorite input and another shortcut key to quickly switch between two inputs if you often work between them.Dell S2421HN/S2421NXDPHDMI HDMIS2421HN/S2421NXDell S2721HN/S2721NXS2721HN/S2721NXManaging Multiple Video Inputs |15You can use the dropdown list to switch to any input source.Dell S2421HN/S2421NXS2421HN/S2421NXDell S2721HN/S2721NXS2721HN/S2721NXNOTE: DDM communicates with your display even when the display is displaying video from another computer. You can install DDM on the computer you frequently use and control input switching from it. You may also install DDM on othercomputers connected to the display.16| Managing Multiple Video InputsRestoring Application Positions | 17Restoring Application PositionsDDM can help you restore application windows into their positions when you reconnect your computer to the display(s). You can quickly access to this feature by right-clicking on DDM iconin the notification tray.If you choose “Auto-restore window layout ”, your application windows’ positions are tracked and remembered by DDM. DDM automatically puts the application windows into their originalpositions when you reconnect your computer to your display(s).If you want to go back to a favorite layout after you have moved the application windows around, you can first “Save current window layout ” and later “Restore saved window layout”.You may use displays with different models or resolutions in your daily routine, and you may apply different window layouts on them. DDM is able to know the display you have reconnected and restore application positions accordingly.In case you need to replace a display in a display matrix configuration, you can save the window layout before replacement and restore the layout after a new display is installed.NOTE: You should keep your applications running in order to benefit from this feature. DDM doesn’t launch applications.Applying Energy Conservation FeaturesOn supported Dell models, an Options tab is available that provides PowerNap energy conservation options. You can choose to set the display’s brightness to the minimum level, or to put the display to sleep when the screensaver is activated.Dell S2421HN/S2421NXS2421HN/S2421NXDell S2721HN/S2721NXS2721HN/S2721NX18| Applying Energy Conservation FeaturesOther Shortcut KeysShortcut keys can be defined for below operations, you can define the shortcut keys for quick access to perform these operations:• Program shortcut key: to quickly open the Quick Settings dialog box.• Easy Arrange MRU shortcut key: to quickly apply the 5 recently used window layouts.• Application window shortcut key: to launch a quick menu for options under Auto Mode and Easy Arrange .Dell S2421HN/S2421NXCtrl + Shift + Num 2Ctrl + Shift + Num 3Ctrl + Shift + Num 4S2421HN/S2421NXDell S2721HN/S2721NXCtrl + Shift + Num 2Ctrl + Shift + Num 3Ctrl + Shift + Num 4S2721HN/S2721NXOther Shortcut Keys |19Attach DDM To Active Window (Only Windows 10)DDM icon can be attached to the active window you are working on. Click on the icon for easy access to below features.Feature Function DescriptionAttach DDM to Active Window (only Windows 10)Change preset orsnap to differentpartitions• DDM icon attached to active window and user caneasily switch windowposition, change color presetmode, and associate auto preset mode.Shortcut key trigger• On a running app window, press Ctrl+Shift+Ins alsotriggers the attached DDM menu.Move app windowamong Easy Ar-range cells• Send the app window to previous/next Easy Ar-range cell.Move app windowamong displays•Send the app window to previous/next display.20| Attach DDM To Active Window (Only Windows 10)Troubleshooting | 21TroubleshootingIf DDM does not work with your display, DDM will show below icon in your notification tray.Click on the icon, DDM shows a more detailed error message.Please note that DDM only works with Dell branded displays. If you are using displays from other manufacturers, DDM doesn’t support them.If DDM is unable to detect and/or communicate with a supported Dell display, please take below actions to troubleshoot:1. Make sure the video cable is properly connected to your display and your computer.especially the connectors should be firmly inserted into position.2. Check the display OSD to ensure DDC/CI is enabled.3. Make sure you have the correct and latest display driver from the graphics vendor (Intel,AMD, NVidia, etc.). Display driver is often the cause of DDM failure.4. Remove any docking stations or cable extenders or converters between the display andthe graphics port. Some low-cost extenders, hubs or converters may not support DDC/CI properly and can fail DDM. Update the driver of such device if the latest version is available.5. Restart your computer.DDM may not work with below displays:• Dell display models earlier than year 2013 and D-series of Dell displays. For more information see /support/monitors.• Gaming displays using Nvidia-based G-sync technology• Virtual and wireless displays do not support DDC/CI• Some early models of DP 1.2 displays, it may be necessary to disable MST/DP 1.2 using the display OSDIf your PC is connected to the Internet, you will be prompted to upgrade to a newer version of DDM when it is available. It is recommended to download and install the latest DDM application. You may also check for new version by right clicking on DDM icon while pressing and holding ‘shift’ key.22| Troubleshooting。
QuickBooks Desktop Integration User Guide
2. QuickBooks Desktop Integration User GuideThank you for purchasing our extension. If you have any questions that are beyond the scope of this guide, please send us an email via the user page contact form here. Thank you.Created: 30/07/2017 | By: Magenest | Support portal: /servicedesk/customer/portal/33IntroductionMain FeaturesSystem RequirementsPrerequisitesHow to setup connectionStep 1: Create a user for QuickBooks Web ConnectorStep 2: Establish the connectionMapping TaxStep 1: Query Tax from QuickBooksStep 2: Mapping TaxesSynchronize Magento DataConfigurationSynchronize ProductAdd data to Queue tableSynchronize Data to QuickBooksStep 1: Download Synchronize Queue fileStep 2: Run the file in the Web connectorQueue table informationResultSync customers from Magento 2 to QuickBooksSync products from Magento 2 to QuickBooksSync Orders from Magento 2 store into QuickBooks Desktop Sales OrderSync Invoices Magento 2 store into QuickBooks Desktop Open Invoices and Receive Payment.Sync Credit Memos Magento 2 store into QuickBooks Desktop Credit MemosDebug SettingUpdateSupportIntroductionfor Magento 2Magento 2 Quickbooks Desktop Integration is a powerful extension that helps merchants synchronize error-free data from your Magento 2 store to QuickBooks Desktop automatically in real-time. Merchants can transfer unlimited online transaction data at a glance.Main FeaturesConnect to multiple QuickBooks company fileSynchronize customer data from Magento 2 to QuickBooks. Update Customer datawhen updating customer information from Magento 2.Synchronize Guest data depend on Magento Order information to QuickBooksSynchronize Payment method & Shipping method from Magento 2 to QuickBooksSynchronize Product data to QuickBooks. Update Product data include updating stockwhen there is modification action from Magento 2.Mapping Tax data between Magento 2 and QuickBooksSynchronize Order data from Magento to QuickBooks with full information such asShipping/Billing Address, order line items with tax/non-tax, Discount/Shipping amountSynchronize Partial/Full Invoice and corresponding Receive Payment from Magento 2Synchronize Partial/Full Credit memo data from Magento 2 with adjustment fee/adjustment refundSystem RequirementsYour store needs to be running on Magento version 2.2.1x, 2.3.x, 2.4.xPrerequisitesYou have to use SSL for your websiteWeb connector application is required on the computer that installs QuickBooks with version 2.1.0.30 and older versionsSupport QuickBooks version:QuickBooks Enterprise SolutionsQuickBooks Premier (2002 or later)QuickBooks Pro (2002 or later)QuickBooks Simple Start (2006 or later)Canadian editions of QuickBooks Pro, Premier, or Enterprise (2003 or later)UK editions of QuickBooks Pro or Accountant Edition (2003 or later)Please note: QuickBooks Web Connector 2.1.0.30 and older versions only support up to TLS 1.0How to setup connectionFirst of all, you have to set up the connection between the Magento website and QuickBooks software through the Web connector application. Please follow the below steps:Step 1: Create a user for QuickBooks Web ConnectorIn this step, you have to create a user account that will be used to establish a connection between Magento 2 and Web connector. You can create one by going to QuickBooks Desktop > Manage User, and click on Add New User.Fill all the fields then click Save Information to save the entered information. The username and password will be used with QuickBooks Web Connector later on.At the end of this step, you have to set up the account for the connection by going to QuickBooks Desktop > Configuration > Connection SettingsStep 2: Establish the connectionPlease click on the “Query company” button to download the connection file to add to the Web connector application:While adding the application file, there are some pop-ups to request permission for this file:QuickBooks will then ask you how and when you'd like for QuickBooks to allow Web connector to access your company file. There are 4 options in the above image:No: not allow read and modify, if you choose this option, it will not read or modify Quickbooks data, so cannot integrate data between 2 systems.Yes, prompt each time: every time that you run the application, it will ask againYes, whenever this QuickBooks company file is openYes, always; allow access even if QuickBooks is not runningAfter adding the connection file to the Web connector application, run the application that has been added:: the password is the password of the user which be created in Step 1 NoteOnce the connection setup is done, you should see the following image:Note: You only need to establish a connection once for one company.Mapping TaxIn this step, the module will map the existing taxes in both systems, therefore, you have to have the corresponding taxes in both Magento and QuickBooks. When all taxes have been prepared, please do the following step to mapping them:Step 1: Query Tax from QuickBooksFirst of all, get query-tax.qwc file to add to Web connector:Mapping Tax table.After Update Selected, you will see all of the taxes that exist in QuickBooks in theStep 2: Mapping TaxesQuickBooks Desktop -> Mapping -> Mapping Taxes, you will see a table which shows all of the taxes in both Magento and QuickBooks You should set the mapping for the QuickBooks tax that corresponds to the Magento tax.ApplyFinally, click the button to save the Mapping.Synchronize Magento DataMagento data will be synchronized into QuickBooks when all of them exist in the Queue table with Queue status.ConfigurationYou have to set up some configuration before synchronizing Magento data into QuickBooks. Go to QuickBooks Desktop -> Configuration -> Synchronize SettingsWhen you open each section, you may see the following settings:Synchronization date from: set update which use to filter when you add object data to Queue by click the button in the Header of the Queue table (second way to add data to Queue table)YesAuto insert id to customer name: Select in case you want to add an ID to the customer name. To avoid customers synchronization failure because customers have the same name.NoAllow Sync Order: Select if you don't want to sync orders.NoAllow Sync Invoice: Select if you don't want to sync invoices and receive payments.NoAllow Sync Credit Memo: Select if you don't want to sync credit memos.Max records per Request: When you click Update Selected or Autorun is triggered in the Web connector, there will be a lot of requests sent to Magento to get data and import to QuickBooks. This field will set the number of items that will be imported into Quickbooks in each of these requests. By default, if you don't set a value for this configuration, it will process all records of one type for each request.Please note that you shouldn’t set it up too large or leave it blank to avoid connection timeout errors.Synchronize ProductIncome Account: Enter Income account name which use to create Inventory Item in QuickBooks: Other charge item in QuickBooksOther Income Account Enter Income account name which use to createDiscount in QuickBooksDiscount Income Account Enter Income account name which use to create: itemNon-Inventory in QuickBooksAccount for Non-Inventory Item: Enter account name which use to create item: Inventory item in QuickBooksCost of Goods Sold Account Enter COGS account name which use to create: Inventory item in QuickBooksAsset Account Enter Asset account name which use to createYou can get these accounts by going to your company file. Then go to Lists > Chart of Accounts and you'll see a list of your existing accounts. If not,create new ones.Add data to Queue tableYou can add Magento data to the Queue table in the following way:Auto-add by trigger add/edit object. It means when you create a new customer or new Order or same that, it is automatically added into the Queue table.Add a set of object data with date filter by clicking the button in the header of the Queue tableAdd specific object data by using Mass action:Synchronize Data to QuickBooksStep 1: Download Synchronize Queue fileGo to QuickBooks Desktop -> Configuration -> Synchronize Settings, click the Synchronize from Magento button to download the sync-queue.qwc fileStep 2: Run the file in the Web connectorAdd the file that you downloaded in step 1 to the Web connector. Then you can update manually by Update Selected or use the Autorun function toget data from Magento to QuickBooks.Note:Simple, Virtual, Giftcard, Downloadable, and child item of configurable products in Magento will create an inventory item in Quickbooks.Other products such as Bundle products, Configurable products, Group products will create a non-inventory item without a list of child items.Only SKU, price, and description will be imported.Only Support Inventory item and Non-inventory item when synchronizing Sales Order.The order of the items that are processed while importing to Quickbooks are Shipping method, Payment method -> Customer/Guest -> Product -> Order -> Invoice -> Receive payment -> Credit memo.You have to make sure that all the information needed to create an order/invoice/receive payment/credit memo must be imported successfully before importing them into Quickbooks to avoid not-found error.Queue table informationIn default, the Queue table only shows the item that belongs to the current company. When you change to another company, you have to add data again. Explain the columns function:Entity ID: Magento entity idType: Magento entity typeIncrement ID: The ID of Order, Invoice, Receive payment (is Invoice ID) and Credit memoAction name: Add or ModStatus:- Queue: the records are ready to synchronize to Quickbooks.- Synchronizing: the records are being processed by Web connector.Note: Sometimes there are some errors while synchronizing, so the records are still in Synchronizing status although the Web connector already stopped. In this case, please submit ticket support for assistance.- Fail: this record cannot synchronize. You should take care of Message error and follow the documentation How to fix some common errors while importing data to Quickbooks.- Success: the records are imported to Quickbooks successfully.- Blocked: these records will not be imported to Quickbooks. You can change these records to Blocked if you don’t want to import one to Quickbooks.Enqueue DateTime: the date-time that this record was addedDequeue DateTime: the date-time that this record was processed by the Web connectorMessage error: when a record cannot be imported, Quickbooks will return an error message that shows why the error occurred. In this case, you should follow the document How to fix some common errors while importing data to Quickbooks. Then you have to correct the data of this record before synchronizing it again.Action: You can quickly go to the Magento entity by clicking the ViewResultSync customers from Magento 2 to QuickBooksSync products from Magento 2 to QuickBooksSync Orders from Magento 2 store into QuickBooks Desktop Sales OrderSync Invoices Magento 2 store into QuickBooks Desktop Open Invoices and Receive Payment.Sync Credit Memos Magento 2 store into QuickBooks Desktop Credit MemosNote:The QuickBooks Desktop Integration supports one-way synchronization only, so the admin should not edit the synced data in QuickBooks manually. This will affect the data update/synchronization.Debug SettingIf you enable Debug mode, the error will write to a file. You should attach the debug file when submitting a request to help us investigate the issue quickly.UpdateWhen a bug fix or new feature is released, we will provide you with the module's new package.All you need to do is repeating the above installing steps and uploading the package to your store. The code will automatically override.Flush the configure cache. Your store and newly installed module should be working as expected.Support2 business daysWe will reply to support requests within .We will offer . Support includes answering questions related to our lifetime free update and 6 months of free support for all of our paid productsproducts, bug/error fixing to make sure our products fit well on your site exactly like our demo.Support include other services such as customizing our products, installation, and uninstallation service.DOES NOT。
UOB INFINITY User Guide
UOB INFINITY User GuideUOB Group l UOB Infinity User Manual User ID ActivationWhat Do You Need to LoginLogin Page (Default View)UOB Infinity Login1Before you login to UOB Infinity for the first time,please ensurethat you have received the two items listed below:1) User ID2)Digital/Physical Token*(required for login to UOB Infinity and toapprove transactions)You can activate your UOB Infinity access online via the login pageupon receipt of your User ID and Security Token.*The physical token will only be issued to users with Global View, Trade subscription and Token Sharing scenario. For other users, you will be able to use our digital token called Infinity Secure. Steps to register and activate Infinity Secure can be found in the “Infinity Secure User Guide”.Self Service Functionsvia Web Browser You can perform the following functions via the UOB Infinity loginpage (applies to both browser/desktop and mobile app):A.Activate your new user ID*B.Recover your password 243A. Activate your new User ID1.You may activate using Infinity mobile app (tap on “ActivateAccount”icon at the bottom right corner of the login screen)orusing desktop browser (click on “Want to activate your newaccount?”).If you do not have a physical token,it is recommended toactivate using Infinity mobile app because you will be ableto setup the digital token upon first time login via Infinitymobile app after the activation is completed.2.Input your Organisation ID and User ID.3.Tick the checkbox to accept Terms and conditions for youruser ID activation.4.Click on the “Next”button.1* Required if you are logging in to UOB Infinity for the first time . 1via Mobile AppActivate using Email and SMS 5.Choose“Use Email and SMS”.Click“Next”.6.Enter the6-digit code sent to the email address registered inyour Infinity user profile.Click“Next”.7.Enter the6-digit code sent to the mobile number registered inyour Infinity user profile.Click“Submit”.8.Set your new passwords and click“Next”to complete thesetup.9.Confirmation message will be displayed on the screen.5678Upon completion of the user activation,if you do not have a physical/digital token,you may log in onto UOB Infinity mobile app using your Organisation ID,User ID and the newly created password.Upon tapping on the“Log In”button,you will be prompted by a message to setup a digital token.Please refer to this user guide to setup your digital token: https:///secure/forms/business/pdfs /infinity-guide-infinity-secure.pdfActivate using Token or Infinity Secure5.Choose “Use Token or Infinity Secure”.Click “Next”.6.Follow the on-screen instructions to generate token responseand input the response to the screen.Click “Next”.7.Set your new passwords and click “Next”.8.Confirmation message will be displayed on the top banner andyou can login into UOB Infinity.5786Login Page (Default View)Account Activation screen (Default View)243B. Recover your password1.Please click on “Have trouble logging in?”2.Input your Organisation ID and user ID.3.Tick the checkbox to accept terms and conditions for your userID activation.4.Click on “Next”button.The subsequent steps will be similar tothe user activation step (refer to page 6and 7).1FeaturesLogin Page (Default View) Note:If you are logging in to UOB Infinity for the first time,youneed to activate your user ID.1.Enter Organisation ID and User ID(you will receive a letter toinform you about your user credentials).2.Input valid password.The“eye”icon enables you to see thepassword that you enter.3.Tick the“Remember Me”checkbox to save Organisation IDand User ID so that,in your subsequent login,you only needto key in your password.4.Upon clicking the“Log In”button:a)If you are logging in for the first time without physical ordigital token,you will be prompted by a message to setupa digital tokenb)If you are logging in using Infinity Secure(digital token),you will see a notice that a push notification is sent toyour mobile phone.c)If you are logging in using a physical token,you will seean on-screen instructions to generate the token response.5.This option will help you to recover your password if you haveforgotten it.nguages available are English,Simplified Chinese or yourlocal language.123456Quick Guide to Login Page。
OpenText Reflection Desktop用户指南说明书
Multi-National Financial Services OrganizationFlexible licensing secures new Reflection Desktop user base andintroduces new opportunitiesBusiness Restructuring Requires Licensing FlexibilityT o provide efficient access to its core applica-tions, often residing on legacy platforms, this organization has used OpenT ext™ Reflection Desktop for decades. Reflection Desktop for UNIX and OpenVMS connects users to text-based applications, supporting a mix of host technologies. This enables the team to connect to legacy applications, often busi-ness-critical. It also gives the opportunity to automate repetitive manual tasks which sup-ports productivity and reduces errors.As the organization’s IT infrastructure and processes evolved over the years, so did Reflection Desktop, now supporting the lat-est operating systems and platforms, as well as adhering to current security standards and protocols. This has enabled the organization toshare sessions in real-time so that colleagues around the world can collaborate effectively.The organization’s IT Manager explains fur-ther: “An upcoming business restructuring and a geographical expansion meant that we needed to add many hundreds of users to our Reflection Desktop base. Our Reflection agreement was on a per device basis, but we felt we needed more flexibility as our business demands a scalable approach. We were mov-ing towards a Citrix-based model, and it was hard to predict the number of users or devices we would require.”Strong Partnership and Future OpportunitiesOpenT ext operates a flexible license system that works particularly well in this scenario. An Enterprise License Agreement (ELA) provides full flexibility within a three-year contract term, without any usage review. At the end of the term an audit will determine the exact licensing re-quirements and the resulting usage data will guide the way forward from then.The IT Manager concludes: “The legal and technical flexibility shown by OpenT ext, cou-pled with the fact that we have been happy with Reflection Desktop for decades, made this an easy decision for us. We are also exploringAt a Glance■ Industry Financial ■ Location Global ■ ChallengeManage secure access to mainframe-based applications for new user community following business restructuring and expansion ■ Products and Services Reflection Desktop ■ Success Highlights+ Seamless access to business-critical applications for hundreds of users+ Automation provides enhanced user productivity + Legal and technical flexibility provides required scalability“The legal and technical flexibility shown by OpenT ext, coupled with the fact that we have been happy with Reflection Desktop for decades, made this an easy decision for us.”IT MANAGERMulti-national financial services organizationCase StudyHost Access for RPA to include our mainframe-based applications in our Robotic Process Automation (RPA) projects. We were delighted when Micro Focus joined the OpenT ext family, as we use solutions from both organizations and welcome the opportunity to consolidate our vendor partnerships.”Learn more at/opentext268-000155-001 | O | 06/23 | © 2023 Open T ext。
戴尔显示器管理器用户指南.pdf_1701139322.3359065说明书
Dell S2419H/S2419HN/S2419NX/ S2719H/S2719HN/S2719NXDell Display ManagerUser’s GuideModel : S2419H/S2419HN/S2419NX/S2719H/S2719HN/S2719NXRegulatory model : S2419Hc/S2419Nc/S2719Hc/S2719Nc2|NOTE : A NOTE indicates important information that helps you make better use of your computer.Copyright © 2018 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or otherjurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.2018 - 03 Rev. A00ContentsOverview (4)Using the quick settings dialog (5)Setting basic display functions (6)Assigning preset modes to applications (7)Organizing Windows with Easy Arrange (8)Managing Multiple Video Inputs (10)Applying Energy Conservation Features (11)Troubleshooting (12)Contents | 3OverviewDell Display Manager is a Windows application used to manage a monitoror a group of monitors. It allows manual adjustment of the displayed image, assignment of automatic settings, energy management, image rotation and other features on select Dell models. Once installed, Dell Display Manager will run each time the system starts and will place its icon in the notification tray. Information about monitors connected to the system is always available when hovering over the notification tray icon.Dell S2719H - Standard4 | OverviewUsing the quick settings dialogClicking Dell Display Manager’s notification tray icon opens the Quick Settings dialog box. When more than one supported Dell model is connected to thesystem, a specific target monitor can be selected using the menu provided.The Quick Settings dialog box allows convenient adjustment of the monitor’s Brightness and Contrast levels, Preset Modes can be manually selected or set to Auto Mode, and the screen resolution can be changed.Dell S2719HThe Quick Settings dialog box also provides access to Dell Display Manager’sadvanced user interface which is used to adjust Basic functions, configure Auto Mode and access other features.Using the quick settings dialog | 5Setting basic display functionsA Preset Mode for the selected monitor can be manually applied using the menuon the Basic tab. Alternatively, Auto Mode can be enabled. Auto Mode causes your preferred Preset Mode to be applied automatically when specific applications are active. An onscreen message momentarily displays the current Preset Mode whenever it changes.The selected monitor’s Brightness and Contrast can also be directly adjusted from the Basic tab.Dell S2719H6 | Setting basic display functionsAssigning preset modes to applications The Auto Mode tab allows you to associate a specific Preset Mode with a specific application, and apply it automatically. When Auto Mode is enabled, Dell Display Manager will automatically switch to the corresponding Preset Mode whenever the associated application is activated. The Preset Mode assigned to a particular application may be the same on each connected monitor, or it can vary from one monitor to the next.Dell Display Manager is pre-configured for many popular applications. To adda new application to the assignment list, simply drag the application from thedesktop, Windows Start Menu or elsewhere, and drop it onto the current list.as well as non-executable files such as zip archives or packed files, are notsupported and will be ineffective.Dell S2719HAssigning preset modes to applications | 78 | Organizing Windows with Easy ArrangeOrganizing Windows with Easy ArrangeSome Dell models feature Easy Arrange, which allows the selected monitor’s desktop to be organized into various predefined or custom window layouts. When Easy Arrange is enabled, windows can easily be repositioned and resized automatically to fill specific regions within a window layout.To get started with Easy Arrange , choose a target monitor and select one of the predefined layouts. The regions for that layout are displayed momentarily on the monitor. Next, drag an open window across the monitor. While the window is being dragged, the current window layout is displayed and an active region gets highlighted as the window passes over it. At any time, drop the window into the active region to place the window in that region.Dell S2719HTo create a custom window layout, size and position the windows (maximum 10) on the desktop and then click the Save link in Easy Arrange . The size and position of the windows is saved as a custom layout and the custom layout icon is created.NOTE : This option does not save or remember the applications that are open.Only the size and position of the windows is saved.To use the custom layout, select the custom layout icon. To delete the currently saved custom layout, close all windows on the desktop and then click the Save link in Easy Arrange .Dell S2719HOrganizing Windows with Easy Arrange | 910 | Managing Multiple Video Inputs Managing Multiple Video InputsThe Input Manager tab provides convenient ways for you to manage multiple video inputs connected to your Dell monitor. It makes it very easy to switch between inputs while you work with multiple computers.All video input ports available to your monitor are listed. You can give each input a name as you like. Please save your changes after editing.You can define a shortcut key to quickly switch to your favorite input and another shortcut key to quickly switch between two inputs if you often work betweenthem.NOTE : DDM communicates with your monitor even when the monitor is displaying video from another computer. You can install DDM on the PC you frequently use and control input switching from it. You may also install DDMon other PCs connected to the monitor.Applying Energy Conservation Features On supported Dell models, an Options tab is available to provide PowerNapenergy conservation options. When the screensaver activates, the monitor’sBrightness can automatically be set to minimum level or the monitor can be put to sleep in order to save additional power.Dell S2719HApplying Energy Conservation Features | 1112 | TroubleshootingTroubleshootingIf DDM cannot work with your monitor, DDM will show below icon in yournotification tray.Click on the icon, DDMshows a more detailed error message.Please note that DDM only works with Dell branded monitors. If you are using monitors from other manufacturers, DDM doesn’t support them.If DDM is unable to detect and/or communicate with a supported Dell monitor, please take below actions to troubleshoot:1. Make sure the video cable is properly connected to your monitor andyour PC, especially the connectors should be firmly inserted intoposition.2. Check the monitor OSD to ensure DDC/CI is enabled.3. Make sure you have the correct and latest display driver from thegraphicsvendor (Intel, AMD, NVidia, etc.). Display driver is often the cause of DDMfailure.4. Remove any docking stations or cable extenders or convertersbetween the monitor and the graphics port. Some low-cost extenders,hubs or converters may not support DDC/CI properly and can failDDM. Update the driver of such device if the latest version is available.5. Restart your system.DDM may not work with below monitors:∞Dell monitor models earlier than year 2013 and D-series of Dellmonitors.You can refer to Dell Product Support websites formore information∞Gaming monitors using Nvidia-based G-sync technology∞Virtual and wireless displays do not support DDC/CI∞Some early models of DP 1.2 monitors, it may be necessary todisable MST/ DP 1.2 using the monitor OSDIf your PC is connected to the Internet, you will be prompted with a message when a newer version of DDM application is available. It is recommended to download and install the latest DDM application.You may also check for new version by right clicking on DDM icon while pressing and holding ‘shift’ key.Troubleshooting | 13。