HDMIEncoder-final

HDMIEncoder-final
HOW TO SETUP 1. If your network access gateway is 192.168.1.*, you can the HDMI Encoder control panel by input 192.168.1.168 to Internet Explorer.
Default Reset & Initial: When power on, keep pressing the RST for
around 10 seconds till the status led off, then will reset, and the parameters be initialized, then the IP of the device will be as
192.168.1.168.
enter
username & password: admin
Main features:
· Support H.264 Baseline Profile / H.264 Main Profile / H.264 High Profile.
· Support MJPEG / JPEG Baseline.
· Audio coding support MPEG1 Audio Layer2.
· CBR/VBR/ABR code rate controlling , · Support Network interface full-duplex mode 1000M.
· Max Supports 1080P @ 60Hz and below HDMI video input.· Support image parameter settings.
· Support HDCP protocol and HD blue-ray.
· Support HTTP, RTSP ，RTMP ，ONVIF protocol.· Support WEB Remote Control.· Support the double stream output.
· The main stream and the second stream can be transferred by different networking protocol.
· Support different output stream resolutions.· Supports MP3 and AAC audio format selection.
· Support switching mono and stereo for audio output stream.· Support GOP frame rate settings.
· Support a click to restore the default configuration.· Support the set-top box.
· Low-power consumption design.
·Stable 3U Hi-quality chassis, if main power supply stop work will automatic switch to standby power supply.
16kbit/s ~ 40Mbit/s.Product Introduction
HDMI Video Encoder - which is a professional HDMI audio & video encoding device with powerful functions. It adopts H.264 encoding, dual-streaming data. With 1 HDMI input supporting MPEG-4 AVC/H.264 High Profile & main Profile code format. Its
high integration and cost-effective designs make this device widely used in variety of digital distribution systems such as CATV digital head-end. Satellite and terrestrial digital TV etc., also it supports VLC decode.Application 1.IPTV
2.NVR(Net Video Recorder)
3.Digital Signage HD stream server
4.Video Conference system video server
5.internet conference system video capture
6.replace HD video capture card
7.Hotel cable TV system
2. If your network access gateway is not 192.168.1.*, you can connect this device directly with your
computer, and set your computer IP as 192.168.1. * , then enter the
control panel of the device, and set the HDMI Encoder IP address according with your router gateway, such as 192.168.0.* .
Product Photos Single Chassis - (1- Channel HDMI Encoder)
(16-Channel HDMI Encoder in 1 Box)
1-Channel HDMI Encoder
User Manu 1920x1080P/1080i/720P@50/60Hz and below
VIDEO
AUDIO
SYSTEM
OTHERS
Input Supports HDMI Resolution Data Rate 0.8Mbps~12Mbps Encoding H.264/AVC High Profile Level 4.0Rate Control CBR/VBR GOP Structure
IBBP
Advanced Pretreatment
De-interlacing, Noise Reduction, Sharpening
Encoding AAC Sampling rate Auto
Bit-rate
32K/48K/64K/96K/128K/160K/192K Sampling precision 24 bit
Data Rate
64Kb/s~384Kb/s
Ethernet 1000 Base-T Ethernet interface Protocol
HTTP unicast/multicast;RTSP;RTMP Control Interface WEB-http://192.168.1.168/indexE.html Firmware
Dimension (W× L× H)170*130*30mm or 3U Standard (16-CH)Weight 0.5kg or 3U 6.5Kg
Temperature 0-45(work),-20-80(storage)
Power 12V/DC or 3U AC 90v ~ 260V 50/60Hz Consumption
5W or 3U 80W
1 * HDMI( 1.3a)
Can be update
---- M a i n S t r e a m A d d r e s s (c a n i n p u t
the address into VLC Player and watch the stream)
---- Input HDMI Resolution & FPS ---- Input HDMI Audio Information ---- continue increasing Number means the
input HDMI is ok, if is ‘0', make ensure the HDMI connects is well.
Access address:
http://192.168.1.168:80/hdmi Video parameters:
Video size ：1920*1080p Input frequency: 60
Encoding frame rate: 30
Audio parameters:
Channel: 2
Input frequency: 48000Encoded size:16181248Hardware status:
Interrupt number: 8847Missing interrupt number: 2Web Control Panel Status Network
HDMI status
Note :
This device default IP address is 192.168.1.1.68, if you changed the IP address & forgot it, you can reset it.
1234
5678
l
a 3U Rackmount Chassis
To set up single port forwarding for multiple ports, do the following: ? Log in to Linksys Smart Wi-Fi.
Set up DHCP reservation for the IP address of the HDMI Encoder. Under Router Settings, click Security. Click the Apps and Gaming tab.
Click Single Port Forwarding. The Single Port Forwarding screen opens. Click Add a new Single Port Forwarding.
In the Application name field, enter a descriptive name.
Enter in the same port number for the External Port and the Internal Port. In the Protocol drop-down list, select TCP, UDP, or Both (default).
In the Device IP# field, enter the last three digits of the IP address you have reserved for the computer you want to forward Internet traffic to. The rest of the IP address has already been completed for you.
Select Enabled, then click Save.
Main Stream Media Server - Setup & Test
Instal software: Flash+Media+Sever3.5 there's no need for serial number when install, both username and code are “1”.start background software:
System Settings Change Password
About VLC
Play by VLC
Other fucntions such as re-stream, save stream files.
Notes:
You can set all the parameters as your needs.
RTMP Setting
Set H.264 level : baseline profile Set RTMP protocol : Enable Set RTMP sever IP Set RTMP sever port Set RTMP stream name HDMI OSD
Device id Settings
Upgrade settings
To set up DDNS: (Linksys - WRT1900AC as example)Sign up for DDNS service at either
/doc/0502945a8762caaedc33d463.html or
/doc/0502945a8762caaedc33d463.html . Note all of the information provided to you by the DDNS provider.
Log in to Linksys Smart Wi-Fi.
Under Router Settings, click Security, then click the Apps and
Gaming tab. The DDNS screen opens.
In the DDNS Service drop-down list (the list that has Disabled
selected by default), select your DDNS service provider.
Complete the fields with information provided by your DDNS provider, then click OK.
To access our HDMI Device on the Internet, do the following: ? Configure the router to use port forwarding for the device. Note the port number used for the device.
Enter the domain name for your network followed by a colon and the port number. For example, if the domain name
registered with your DDNS provider is , and your Internet camera has been configured to use port8080, you would enter:
:8080
Open up the file of FlashPlayer : VideoPlayer.htmlType in : rtmp://ip address /rtmp/hdmi ,choose live, then can see the image or type in ：rtmp://192.168.1.100:1935/live/hdmi choose ：LIVE click ：Play stream
11121314
14151718
Clieck Media, choose the Open Network Stream...
Then input the stream address in the new open window.
Note: Please reboot the device after setting changed.
/doc/0502945a8762caaedc33d463.html /doc/0502945a8762caaedc33d463.html。