诺瓦科技LED显示屏接收卡MRV365规格书英文版
诺瓦科技透明LED显示屏接收卡MRV340规格书英文版
Product images provided in this file are for reference only , and the actual products shall prevail.Rev2.1.1 NS110100105SpecificationsReceiving Card MRV340OverviewNova M3 MRV340 is the advanced model of Nova receiving card. It iscompatible with all functions of MRV300, and with a maximum outputof 24-group data.Features1)Single card outputs 16-group of RGBR 'data;2)Single card outputs 20-group of RGB data; 3)Singlecard outputs 24-group of RGB data;4)Single card outputs 64-group of serial data;5)Single card supports resolution of 256x226;6)Configuration file readback;7)Temperature monitoring;8)Ethernet cable communication status detection;9)Power supply voltage detection;10)Pixel-by-pixel brightness and chromaticity calibration Brightnessand chromaticity calibration coefficients for each LED;11)Pre-store picture setting.Output Interface DefinitionUnder all the four different working modes of it, two 50P interfaces can output different data, and only one common program and software is required, no customized program is needed. Interfaces are defined as follows:Vir t u a l R s i1) 16- g roup data mode Support i ng 16-group of RGBR 'parallel data, defined as follows:in the last group of each 50pin hub is decoding signal E at 1/32 scan mode.2) 20- g roup parallel data modeSupport i ng 20 sets of parallel data, defined as follows:Supporting 24 sets of parallel data, defined as follows:In case of vertical LED bar, the default is that Data1 drives the first column of from the left and Data64 drives the 64th column. (front view).Under serial mode, there are 64 data cables totally Each cable can drive one LED bar independently.In case of horizontal LED bar, the default is that Data1 drives the first row from the top and Data64 drives the 64th row. (front view).DimensionsThickness of the board is about 1.6mm. The overall thickness (board thickness ＋ t hickness of the components on front and back side) is about 18.5 mm.Unit: mm.AppearanceNote: Product images provided in this file are for reference only, and the actual products shall prevail.J9 definition （ I ndicator Light Socket ）SpecificationsHUBSpecific Model ListTo meet the needs of different customers, Nova has provided morespecific models of the products, including standard products in stock.Oels need to be customized.AppendixSerial data decoding circuit：。
诺瓦科技LED接收卡MRV365规格书
产品规格书接收卡MRV365本文中的照片仅供参考，请以购买的实物为准Rev2.1.1NS110000110西安诺瓦电子科技有限公司概述MRV365是诺瓦M3系列的高级版本接收卡，其兼容MRV320所有功能，且增加了灯板Flash 管理接口和继电器模块。
功能特性1) 单卡输出RGBR ’数据16组； 2) 单卡输出RGB 数据20组； 3) 单卡输出串行数据64组； 4) 单卡带载像素为256×226； 5) 一路继电器控制；6) 支持灯板Flash 管理，可用来存储校正系数和灯板信息； 7) 支持配置文件回读； 8) 支持温度监控；9) 支持网线通讯状态检测； 10) 支持供电电压检测； 11) 支持逐点亮色度校正；12) 支持接收卡预存画面设置； 13) 支持连接监控卡。
西安诺瓦电子科技有限公司接口定义控制系统有3种工作模式,每种模式的2个50P 输出不同数据,只需要用一版通用程序和软件即可，无需定制程序；接口定义如下: 1) 16组数据模式支持RGBR ’并行数据16组, 定义如下：科技有限公司2) 20组并行数据模式支持20组并行数据，定义如下：有限公司3)64组串行数据模式支持64组串行数据，定义如下：科技有限公司尺寸板卡厚度约为1.7。
总厚度（板卡厚度＋正反器件厚度）约为30mm 。
RELAY(继电器模块)尺寸：单位：mm 。
西安诺瓦电子科技有限公司提示：本文中的照片仅供参考，请以购买的实物为准。
J4（灯板Flash 管理接口）定义：J10定义（指示灯座）：技有限附录串行译码电路：西安诺瓦电子科技有限公司。
诺瓦科技LED监控卡MON300规格书英文版
8) Cabinet door open/close status detection supported;
9) Monitoring card HUB is required for LED status inspection or flat
cable detection.
www.novastar.tech
1) 16-group data mode
西安诺瓦电子科技有限公司
www.novastar.tech
Page 4
西安诺瓦电子科技有限公司
2) 20-group data mode
www.novastar.tech
Page 5
西安诺瓦电子科技有限公司
www.novastar.tech
Page 6
Connection 西安诺瓦电子科技有限公司
0.12
0.15
0.20
Working environment temperature (℃)
-20℃~60℃
Working environment humidity (%)
0%~95%
Environment
Notice: When working
-20℃~60℃
temperature
temperature of the
西安S诺p瓦电e子c科i技f有ic限a公t司ions Monitoring Card MON300
Product images provided in this file are for reference only, and the actual products shall prevail.
Rev2.1.0 NS110100129
supply output
诺瓦科技LED显示屏接收卡XC100规格书英文版
SpecificationsReceiving Card XC100Rev1.2.1NS110100191XI 'AN NOVA S T AR T E C H CO .,LT D.OverviewXC100 is super-small full function high-end mini receiving card rolled out lately by NovaStar. Compared with traditional receiving card, XC100 is more flexible in usage and DDR3 SODIMM port adopted renders it to adapt to various electrical structures easily; as a result, one module card is suitable for all applications, greatly reducing the types of module cards to be purchased.XC100 single card can load pixel of 256*256, supporting such utility functions as intelligent module management, LED display human-computer interaction and built-in voltage temperature detection. Specific circuit and program design of XC100 can effectively reduce electromagnetic radiation of the system, helping users to make their products pass EMC certification easily.Such a powerful XC100 is bound to usher in a new age of receiving card! Features 1) Single card supports pixel points of 256*256.2) Single card supports parallel output of 24-module RGB signal, extending to parallel data of 48-module RGB at maximum.3) Any scanning types within 1-1/32 scan and 595 serial decoding scanning aresupported.4) All mainstream LED driving chip like regular chip and PWM chip are supported. 5) High gray scale and high refresh rate is supported. 6) Pixel-by-pixel calibration of brightness degree is supported.7) Perfect special shape support; Random alignment, random test pixel, special-shapedmodule, special-shaped cabinet and special-shaped LED display make load more easily.8) Seamless switching of various hot backups including loop backup, dual card backup,dual power supply backup, etc. are supported.9) Human-computer interaction of cabinet and LED display is supported. 10) One-way voltage and temperature detection is available.11) Intelligent module is supported, with the functions of storing and managing calibrationcoefficient, module information and moudle parameters, as well as row line detection and LED pixel-by-pixel error detection without the need of monitoring card. 12) Special EMC design effectively reduces electromagnetic radiation.XI 'A N N O VA S T A R T E C H C O .,LT D.AppearanceNotes1: Positioning hole is connected to GND.DimensionsUnit: mmXI 'AN NOVA S T AR T E C H CO .,LT D.Output Interface DefinitionIntelligentmodule portX I'A NN OV AS TA RT EC HC O.,L TD.Gigabit network portX I N OV AS TA RT EC HC O.,L TD.X IX ISpecifications X I T E C。
诺瓦科技透明LED屏接收卡TBR200详细参数说明书英语版
TBR200Receiving CardDocument V ersion:V1. 1 .0SpecificationsDocument Number: NS110100467Change HistoryChange HistoryContentsii1 SafetyContentsChange History (i)1 Safety ............................................................................................................................................... 12 Overview ......................................................................................................................................... 23 F eatures ........................................................................................................................................... 3 Hardware Structure.......................................................................................................................4 44.1 Appearance .................................................................................................................................................. 4 4.2 Dimensions .................................................................................................................................................. 5 4.3 Definition of Data Interface .. (6)5 Specifications (9)1 SafetyThis chapter illustrates safety of the TBR200 receiving card to ensure the product’sstorage, transport, installation and use safety. Safety instructions are applicable to allpersonnel who contact or use the product. First of all, pay attention to the followingpoints.●Read through the instructions.●Retain all instructions.●Comply with all instructions.Storage and Transport Safety●Pay attention to dust and water prevention.●Avoid long-term direct sunlight.●Do not place the product at a position near fire and heat.●Do not place the product in an area containing explosive materials.●Do not place the product in a strong electromagnetic environment.●Place the product at a stable position to prevent damage or personal injurycaused by dropping.●Save the packing box and materials which will come in handy if you ever have tostore and ship the product. For maximum protection during storage and shipping,repack the product as it was originally packed at the factory.Installation and Use Safety●Only trained professionals may install the product.●Plugging and unplugging operations are prohibited when the power is on.●Ensure safe grounding of the product.●Always wear a wrist band and insulating gloves.●Do not place the product in an area having frequent or strong shake.●Perform dust removing regularly.●Contact us for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization.●Replace faulty parts only with the spare parts supplied by us.2 Overview2Overview The TBR200 is an M3 series high-density receiving card developed by NovaStar. Compared with traditional receiving cards, the TBR100 is more flexible in usage. The TBR200 has a loading capacity of 512 ×384 pixels. It supports multiple functions, such as module flash or smart module management, LCD for man- machine interaction, and voltage and temperature detection. Its specific circuit and program design can effectively improve the system ’s electromagnetic compatibility, making it easier for users to acquire the EMC certification.3 Features3Features●Outputs RGB data up to 32 groups per receiving card.●Loads 512 ×384 pixels per receiving card.●Supports any scan type within 1 –1/32 scan, and multiple serial decoding scanapproaches like 595.●Supports mainstream LED driver chips such as regular chips or PWM chips.●Supports high grayscale and high refresh rate.●Supports pixel level brightness and chroma calibration.●Supports free wiring and pixel testing of irregular screens, loading irregularmodules, irregular cabinets or irregular screens in a prefect manner.●Supports multiple hot backup approaches featuring seamless switching, such asloop backup, dual card backup, dual power backup.●Supports LCD screen for man-machine interaction.●Supports built-in voltage and temperature detection.●Supports smart module, which features information storage and managementlike calibration coefficients, module data and parameters, and performs ribbon cable detection and LED pixel level errors detection, making monitor cardsunnecessary.●Features special EMC design, which reduces electromagnetic radiationeffectively.Receiving Card TBR200Specifications4 Hardware StructureThe unit of dimension chart is “mm”. The location holes are connected to signalgrounds (GND).4Hardware Structure4.1 AppearancePictures shown in this document are for illustration purpose only. Actual product maydiffer.4.3 Definition of Data InterfaceSpecifications 4 Hardware StructureSpecifications5Specifications。
诺瓦科技LED接收卡XC200规格书英文版
Product Specifications Receiving Card XC200Rev1.1.2NS110100195XI 'AN N OVA S T AR T E C H CO .,LT D.GeneralXC200 is a high density receiving card in Nova M3 series. Compared with traditional receiving card, XC200 is more flexible in usage.A single XC200 card can load pixel of 512*384, supporting such utility functions as memory on module, intelligent module management, LED display human-computer interaction and built-in voltage temperature detection. Specific circuit and program design of XC200 can effectivelyreduce electromagnetic radiation of the system, helping users to make their products pass EMC certification easily.Features 1) Single card supports the maximum output of 32-group RGB data. 2) Single card supports resolution of 512*384.3) Supporting any scan types with Supporting any scan types within1-1/32 scan; supporting 595 and other serial decoding scan. 4) Supporting all mainstream LED driving chips, such as regular chipand PWM chip.5) Supporting high gray scale and high refresh rate.6) Supporting pixel-by pixel calibration of brightness and chroma. 7) Supporting the special shape: loading much easier with randomalignment,randompixeltest,special-shapedmodule,special-shaped cabinet and special-shaped LED display.8) Supporting seamless switch of various hot backups, including loopXI 'A N N O VA S T A R T E C H CO .,LT D.backup, dual card backup, dual power supply backup, etc.9) Supporting the connection of LCD module to realize thehuman-computer interaction.10) Supporting one channel of voltage and temperature detection. 11) Supporting intelligent module, with the functions of storing andmanaging calibration coefficient, module information and module parameters, as well as the row line detection and LED pixel-by-pixel error detection without the need of monitoring card.12) The special EMC design effectively reduces the electromagneticradiation.Output interface definition 1) 32-group parallel data modeSupporting 32-group of RGB parallel data, defined as follows:Note:RFUxx refers to reserved signal; The blue part in JH2 refers to the MOM interface (left idle if not used).XI 'A N N O VA S T A R T E C H CO .,LT D.JH1JH21 GND 5V2 1 GND 5V 23 GND 5V4 3 GND 5V 45 TEST_KEY STA_LED6 5 R17 G17 6 7 FPGA_InOut3 FPGA_InOut2 8 7 B17 R18 8 9 FPGA_InOut1 Com_In2 10 9 G18 B18 10 11 Com_In1 Com_Out2 12 11 R19 G19 12 13 Com_Out1 GND 14 13 B19 R20 14 15 OE_BLUE OE_GREEN 16 15 G20 B20 16 17 OE_RED CTRL 18 17 R21 G21 18 19 E D 20 19 B21 R22 20 21 C B 22 21 G22 B22 22 23 A LAT 24 23 R23 G23 24 25 DCLK GND 26 25 B23 R24 26 27 B16 G16 28 27 G24 B24 28 29 R16 B15 30 29 GND GND 30 31 G15 R15 32 31 R25 G25 32 33 B14 G14 34 33 B25 R26 34 35 R14 B13 36 35 G26 B26 36 37 G13 R13 38 37 R27 G27 38 39 B12 G12 40 39 B27 R28 40 41 R12 B11 42 41 G28 B28 42 43 G11 R11 44 43 R29 G29 44 45 B10 G10 46 45 B29 R30 46 47 R10 B9 48 47 G30 B30 48 49 G9 R9 50 49 R31 G31 50 51 GND GND 52 51 B31 R32 52 53 B8 G8 54 53 G32 B32 54 55 R8 B7 56 55 GND SPI_CLK 56 57 G7 R7 58 57 SPI_CS SPI_MOSI 58 59 B6 G6 60 59 SPI_MISO CODE0 60 61 R6 B5 62 61 CODE1 CODE2 62 63 G5R564 63 CODE3CODE4 64 65 B4 G4 66 65 H164_CLK H164_CSD 66 67 R4B3 68 67 GND RFU1 68 69 G3 R3 70 69 RFU2 RFU3 70 71 B2 G2 72 71 RFU4 RFU5 72 73 R2 B1 74 73 RFU6 RFU7 74 75 G1 R1 76 75 RFU8 RFU9 76 77 5V GND 78 77 5V GND 78 795VGND80795VGND80XI 'AN NOVA S T AR T E C H CO .,LT D.2) 64-group serial data modeSupport 64 sets of serial data, defined as follows:Signals in blue are MOM control interface and green is LCD control interface.JH1JH21 GND 5V2 1 GND 5V 23 GND 5V4 3 GND5V 4 5 EXT_KEYSTA_LED- 6 5 DATA32 DATA33 6 7 RFU7RFU6 8 7 DATA34 DATA35 8 9RFU5 TEST_INPUT_KEY 10 9 DATA36 DATA37 10 11RFU3 RFU2 12 11 DATA38 DATA39 12 13 RFU1GND 14 13 DATA40 DATA41 14 15 OE_BLUE OE_GREEN16 15 DATA42 DATA43 16 17 OE_REDCTRL 18 17 DATA44 DATA45 18 19 E D 20 19 DATA46 DATA47 20 21 C B 22 21 DATA48 DATA49 22 23 ALAT 24 23 DATA50 DATA51 24 25 DCLK GND 26 25 DATA52 DATA53 26 27 NC NC 28 27 DATA54 DATA55 28 29 NC NC 30 29 GND GND 30 31 NC NC 32 31 DATA56 DATA57 32 33 NC NC 34 33 DATA58 DATA59 34 35 NC NC 36 35 DATA60 DATA61 36 37 NC NC 38 37 DATA62 DATA63 38 39 NC NC 40 39 NC NC 40 41NCNC4241NCNC42XI 'AN NOVA S T AR T E C H CO .,LT D.43 DATA31 DATA30 44 43 NC NC 44 45 DATA29 DATA28 46 45 NC NC 46 47 DATA27 DATA26 48 47 NC NC 48 49 DATA25 DATA24 50 49 NC NC 50 51 GND GND 52 51 NC NC 52 53 DATA23 DATA22 54 53 NC NC 54 55 DATA21 DATA20 56 55 NC SPI_CLK 56 57 DATA19 DATA18 58 57 SPI_CS SPI_MOSI 58 59 DATA17 DATA16 60 59 SPI_MISO CODE0 60 61 DATA15 DATA14 62 61 CODE1 CODE2 62 63 DATA13 DATA12 64 63 CODE3 CODE464 65 DATA11 DATA10 66 65 H164_CLK H164_CSD66 67 DATA9 DATA8 68 67 GND EXT_LCD_BL68 69 DATA7 DATA6 70 69 EXT_LCD_BL1EXT_LCD_SC L/DB0 70 71 DATA5 DATA4 72 71 EXT_LCD_SCL/DB1 EXT_LCD_CD/RS 72 73 DATA3 DATA2 74 73 EXT_LCD_CS#/RW RFU8 74 75 DATA1 DATA0 76 75 RFU9RFU10 76 77 5V GND 78 77 5V GND 78 795VGND80795VGND 80DimensionsUnit: mmXI 'A N N O V A S T AR T E C H CO .,LT D.AppearanceNote1: Positioning hole is connected to GND.Note2: Pictures used in this manual are B version of the board card. The functionsof different versions are basically the same. There are only a few small differencesin their appearance.J1（Network Port）definition:X I'A NN OV AS TA RT EC HC O.,L TD.Port1_TRD0- 1 2 Port1_TRD0+Port1_TRD1- 3 4 Port1_TRD1+Port1_TRD2- 5 6 Port1_TRD2+Port1_TRD3- 7 8 Port1_TRD3+GND 9 10 GNDGND 11 12 GNDPort2_TRD0- 13 14 Port2_TRD0+Port2_TRD1- 15 16 Port2_TRD1+Port2_TRD2- 17 18 Port2_TRD2+Port2_TRD3- 19 20 Port2_TRD3+Working conditionsStorage and transport temperature-40℃~100℃Temperature of working environment-25℃~85℃Input voltage DC 3.3V~6VRated current0.5ARated dissipation 2.5WNet weight 42.2gX I'A NN OV AS TA RT EC HC O.,L TD.。
诺瓦科技LED显示屏接收卡MRV330规格书英文版
SpecificationsReceiving Card MRV330Product images provided in this file are for reference only , and the actual products shall prevail.Rev2.2.0NS110100210XI 'AN NOVA S TAR T E C H C O .,L T D.OverviewMRV330 is the 24-group data receiving Card of Nova M3 series which is without HUB.Features1)Integrated 12 standard HUB75 connectors and without the HUB structure ；2) Single card outputs 24-group of RGB data;3) Single card supports resolution of 256x226; 4) Configuration file readback; 5) Temperature monitoring; 6) Ethernet cable communication status detection;7) Power supply voltage detection; 8)Pixel-by-pixel brightness and chromaticity calibration. Brightness and chromaticity calibration coefficients for each LED; 9)Pre-store picture setting;10) Comply with EU RoHs standard;11) Comply with EU CE-EMC Class A standard.XI 'A N NOV A S T A R T E C H C O .,L T D.Output Interface DefinitionThis receiving card has 12 16-Pin standards HUB75 outputs, and the definition is as follows:CO .,L T D.DimensionsBoard thickness is not greater than 1.6mm, and the total thickness(board thickness + thickness of both front panel and back panel) is not greater than 18.5mm.Unit: mm.XI 'A N N O V A S T A R T E C HCO .,LAppearanceNote : Product images provided in this file are for reference only, and the actualproducts shall prevail. J9 definition （Indicator Light Socket ） Specifications XI 'A T A R T E C HCO .,L T D.Specific Model ListTo meet the needs of different customers, Nova has provided morespecific models of the products, including standard products in stock.Other models need to be customized.X I'A NN OV AS TA RTAppendixSerial data decoding circuit：X I'A NN OV AS TA RT EC HC O.,L TD.。
诺瓦科技LED显示屏接收卡MRV210规格书英文版
SpecificationsReceiving Card MRV210Product images provided in this file are for reference only , and the actual products shall prevail.Rev2.1.3NS110100245XI 'AN NOVA S TAR T E C H C O .,L T D.FeaturesMRV210 is the receiving card with 24-group data mode of Nova. It has the following features:1) Single card outputs 16-group of RGBR 'data; 2) Single card outputs 24-group of RGB data; 3) Single card outputs 20-group of RGB data; 4) Single card outputs 64-group of serial data; 5) Single card supported resolution 256x226; 6) Configuration file read back; 7) Temperature monitoring;8) Ethernet cable communication status detection;9) Power supply voltage detection; 10) Pixel-by-pixel brightness and chromaticity calibration andbrightness and chromaticity calibration coefficients for each LED; 11) Comply with EU RoHs standard;12) Comply with EU CE-EMC standard.XI 'A N N O VA S T A R T E C HCO .,L T D.Output Interface DefinitionUnder all the four different working modes of it, four 26P interfaces can output different data. Interfaces are defined as follows: 1) 16-group data mode （With virtual output ）Supporting 16-group of RGBR 'parallel data, defined as follows:It support 1/32 scan mode in 16-group data mode, and R4B ，R8B ，R12B ，R16B are decoding signal E. Pin 9 is decoding signal Ctrl below 1/16 scan mode(contain 1/16 scan). Pin 8 is decoding Ctrl signal in 1/8 scan and below.XI 'AN NOVA S TAR T E C HCO .,L T D.2) 20-group data mode Supporting 20 sets of parallel data, defined as follows:Pin9 is Ctrl signal in 1/16 scan and below, and Pin 8 is decoding Ctrl signal in 1/8 scan and below.XI 'A N N O VA S T A R T E3)24-group data modeSupporting 24 sets of parallel data, Serial data decoding is required for scan mode above 1/4 scan (Serial data decoding circuit in the appendix), defined as follows:D. L T4) 64-group serial data modeSupporting 64 sets of serial data, defined as follows:Under serial mode, there are 64 data cables totally. Each cable can drive one LED bar independently.In case of horizontal LED bar, the default is, Data1 drives the first row from the top, and Data64 drives the 64th row.In case of vertical LED bar, the default is, Data1 drives the first column of from the left, and Data64 drives the 64th column.XI 'AN NOVA S TAR T E C HCO .,L T D.X I'A NN OVBoard thickness is not greater than 2mm, and the total thickness (board thickness + thickness of both front panel and back panel) is not greater than 18mm.Unit: mm. AppearanceNote: Product images provided in this file are for reference only, and the actual products shall prevail.J9 definition （Indicator light Socket ）XI 'A N N O VA S T A R T E C HCO .,L T D.Specific Model ListTo meet the needs of different customers, Nova has provided more specific models of the products, including standard products in stock. Other models need to be customized.XO .,L T D.AppendixSerial data decoding circuit：X I'A NN OV AS TA RT EC HC O.,L TD.www.novastar.tech Page 10。
诺瓦科技LED全彩屏接收卡MRV220规格书英文版
Product images provided in this file are for reference only , and the actual products shall prevail.Rev2.1.4 NS110100247SpecificationsReceiving Card MRV220FeaturesMRV220 is the receiving card of Nova with 28-group data mode. It has thefollowing features:1)Single card outputs 24-group of RGB data;2)Single card outputs 28-group of RGB data;3) Single card support resolution 256x226;4) Configuration file read back;5) Temperature monitoring;6) Ethernet cable communication status detection;7) Power supply voltage detection;8) Pixel-by-pixel brightness and chromaticity calibration, Brightnessand chromaticity calibration coefficients for each LED;9) Comply with RoHS standard ;10) C omply with EU CE-EMC Class A standard.Output Interface DefinitionUnder all the two different working modes of it, two 60P interfaces canoutput different data. Each 60p contains two 30P with the samedefinition. Interfaces are defined as follows:1)24-group data modeSupport ing 24 sets of parallel data ,defined as follows:2)28-g roup data modeSupporting 28 sets of parallel data. Serial data decoding is required for scan mode above 1/8 scan (Serial data decoding circuit in the appendix), defined as follows:Supporting 64 sets of serial data, defined as follows:DimensionsThickness of the board is about 2mm. The overall thickness ( b oard thickness ＋ t hickness of the components on front and back side) is about 18 m m .Unit: mm.AppearanceSpecific Model ListTo meet the needs of different customers, Nova has provided more specificmodels of the products, including standard products in stock. Page 10 Page 11 Other models need to be customized.AppendixSerial data decoding circuit ：。
LED全彩接收卡诺瓦科技MRV316规格文档说明书英语版
MRV316Receiving CardProduct Description Document Version:V1.0.0Receiving Card MRV316Copyright © 2017 Xi ’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi ’an NovaStar Tech Co., Ltd.Product Description Change HistoryProduct Description ContentsContentsChange History (ii)1 Safety ............................................................................................................................................... 1 2 Overview ......................................................................................................................................... 2 3 F eatures ........................................................................................................................................... 3 Hardware . (44)4.1 Appearance .................................................................................................................................................. 4 4.2 Dimensions .................................................................................................................................................. 5 4.3 Indicators ..................................................................................................................................................... 5 4.4 Definition of Data Interface .. (6)5 Software Structure ........................................................................................................................ 8 6 9 Typical Networking ...................................................................................................................... 7 Specifications . (11)Change HistoryTrademark is a registered trademark of Xi ’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi ’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar ) . This document is intended to help you understand and use the product. For accuracy and reliability,NovaStar may make improvements and/or changes to this document at any time and without notice. Anyproblem in use or any good suggestion, please contact u s through ways provided in the document. We willdo our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.1 Safety1 SafetyThis chapter illustrates safety of the MRV316 receiving card to ensure the product’sstorage, transport, installation and use safety. Safety instructions are applicable to allpersonnel who contact or use the product. First of all, pay attention to following points.●Read through the instructions.●Retain all instructions.●Comply with all instructions.Storage and Transport Safety●Pay attention to dust and water prevention.●Avoid long-term direct sunlight.●Do not place the product at a position near fire and heat.●Do not place the product in an area containing explosive materials.●Do not place the product in a strong electromagnetic environment.●Place the product at a stable position to prevent damage or personal injurycaused by dropping.●Save the packing box and materials which will come in handy if you ever have tostore and ship the product. For maximum protection during storage and shipping,repack the product as it was originally packed at the factory.Installation and Use Safety●Only trained professionals may install the product.●Plugging and unplugging operations are prohibited when the power is on.●Ensure safe grounding of the product.●Always wear a wrist band and insulating gloves.●Do not place the product in an area having frequent or strong shake.●Perform dust removing regularly.●Contact NovaStar for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization.●Replace faulty parts only with the spare parts supplied by NovaStar.2 Overview2OverviewThe MRV316 is a new receiving card developed by NovaStar. A single MRV316 loads up to 512x256 pixels.The MRV316 supports pixel level brightness and chroma calibration, which effectively removes color difference, greatly improves display consistency of LED images, and presents finer displays to users.Software and hardware designs of the MRV316 have fully concerned users' deployment, operating and maintenance scenarios, enabling easier deployment, more stable operating and more efficient maintenance.3Features4Hardware4.1 AppearanceProduct images provided in this file are for reference only, and the actual productsshall prevail.44.2 DimensionsThe board thickness is not greater than 2.0 mm, and the total thickness (board thickness + thickness of components on front and rear panels) is not greater than 17.5 mm.4The u n it of dimension chart is “mm ”. The location holes are connected to signal grounds (GND).4.3 IndicatorsHC 11 12 HD HDCLK 13 14 HLAT HOE 15 16 GNDReceiving Card MRV316Product Description5 Software Structure6 Typical Networking6 Typical NetworkingFigure 6-2 No sending card mode7 Specifications6Typical NetworkingThe MRV316 is applied to the LED display synchronous system which is generally composed of the LED display, receiving card, LED display controller and controller peripherals. The receiving card is connected to the LED display over HUB connectors.The synchronous system requires connecting a computer to display the computer ’s images and texts on the LED display. The synchronous system's structure is shown in the following figure. Figure 6-1 Sending card mode5Software StructureFirmware in the delivery MRV316 includes MCU program and FPGA program. Program download method:Visit w ww.novastar-led.c n a nd change the user interface language to English at thetop right. Then, on the displayed P roducts&Downloads page, click the target receiving card in the R eceiving Card section to enter its detail introduction page. Atlast, click D ownloads to enter the download list and download the required program packages.Receiving Card MRV316Product Description 9。
诺瓦科技LED显示屏接收卡X3C规格书英文版
X3CReceiving CardSpecificationsProduct Version: V1.0.1 Document Number: NS110100349XI 'AN NOVA S T AR T E C H CO .,L T D.Copyright ©2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a registered trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.X I'A NN OV AS TA RT EC HC O.,L TD.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC OSpecifications ContentsContentsChange History .................................................................................................................. i i Contents ............................................................................................................................ i ii1 Overview (1)2 Features (2)3 Appearance (3)4 Dimensions (4)5 Definition of Pins (5)6 Specifications (7)X I'A NN OV AS TA RT EC HC O.,L TD.1 Overview The X3C is a small-size and full-function receiving card. It is designed with stamp hole-shaped connectors and can be welded to the adapter plate like an integrated chip. A single X3C card can load up to 256×226 pixels and supports multiple functions, such as brightness calibration, chroma calibration, voltage measurement and temperature measurement.X I'A NN OV AS TA RT EC HC O.,L TD.2 Features● A single card supports 256×226 pixels.● A single card supports parallel output of eight sets of RGB signals, and thesignals can be extended to 16 sets of parallel data through the D extensionsignal.●Supports any type of scanning modes from 1 scan to 1/32 scan, and supports theserial decoding and scanning mode that uses 74HC595 and so on.●Supports all mainstream LED driver ICs, such as general chips and PWM chips.●Supports high grayscale and high refresh rate.●Supports pixel level brightness and chroma calibration.●Supports configuration file readback.●Supports detection of Ethernet cable communication status.●Supports settings of displays stored in the sending card.●Supports voltage and temperature measurement.●Complies with the European Union’s CE-EMC standard.X I'A NN OV AS TA RT EC HC O.,L TD.3 Appearance Product images provided in this file are for reference only, and the actual products shall prevail.X I'A NN OV AS TA RT EC HC O.,L TD.Specifications4 Dimensions4DimensionsUnit: mmThe board thickness is not greater than 2.0 mm, and thickness of the highestcomponent on front side is not greater than 3.5 mm.XI 'AN NOVA S T AR T E C H CO .,LT D.5Definition of PinsXI 'T AR T E C H CO .,LT D.X I'Receiving Card X3C Specifications6 Specificationswww.novastar.tech 76SpecificationsXI 'AN NOVA S T AR。
诺瓦科技透明LED屏接收卡MRV360规格书
产品规格书
接收 卡 MRV360
本文中的照片仅供参考，请以购买的实物为准
Rev2.1.2 NS110000108
功能特性
MRV360是诺瓦M3系列的接收卡，具备灯板flash管理功能。
具有以下特性：
1)单卡输出RGBR’数据16组；
2)单卡输出RGB数据20组；
3)单卡输出串行数据64组；
4)单卡带载像素为256×226；
5)支持灯板Flash管理，可用来存储校正系数和灯板信息；
6)支持配置文件回读；
7)支持温度监控；
8)支持网线通讯状态检测；
9)支持供电电压检测；
10)支持逐点亮色度校正；
11)支持接收卡预存画面设置；
12)支持连接监控卡；
13)符合欧盟RoHs标准；
14)符合欧盟CE-EMC CLass A标准。
附录
串行译码电路：。
诺瓦科技LED全彩接收卡A4s参数设置说明书英文版
A4s Receiving CardDocument Version:V1.2.0Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi ’an NovaStar Tech Co., Ltd.TrademarkSpecifications Change Historyis a registered trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are wele to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability,NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or a n y good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.Change HistoryVersion Release Date DescriptionV1. 2 .0 201 8 - 0 8 - 10 O p timized the quick seam correction function. V1.1.02018 - 01 - 25Added the following functions:●LVDS transmission ( S upported by dedicatedfirmware program ) .●Image rotation in 90 ° increments .V1.0.1 2017 - 07 - 27 Optimized the data interface information. V1.0 .0201 6 - 10 - 25First release.Specifications ContentsContentsChangeHistory (ii)1 Safety ............................................................................................................................. .. 12 Overview ........................................................................................................................ .. 23Features ......................................................................................................................... .. 33.1 Improvement in Display Effect ..................................................................................................................... 33.2 Improvement in Maintainability .. (3)3.3 Improvement in HardwareReliability (4)3.4 Improvement in SoftwareReliability (5)4 Hardware ....................................................................................................................... .. 64.1 Appearance ..................................................................................................................................................64.2 Dimensions (6)4.3 Indicators (7)4.4 Definition of Data Interface( Top ) (8)4.1.1 24-Group ParallelData (8)4.1.2 64-Group SerialData (11)4.1.3 Extended FunctionsDesign (14)5 FirmwareUpdate (16)6 Applications (17)7 Specifications (18)A Abbreviation (19)B Terms (20)1 Safety1 Safety’s storage, transport, installation and use safety. Safety instructions areapplicable to all personnel who contact or use the product. First of all, payattention to following points.●Read through the instructions.●Retain all instructions.●ply with all instructions.Storage and Transport Safety●Pay attention to dust and water prevention.●Avoid long-term direct sunlight.●Do not place the product at a position near fire and heat.●Do not place the product in an area containing explosive materials.●Do not place the product in a strong electromagnetic environment.●Place the product at a stable position to prevent damage or personalinjury caused by dropping.●Save the packing box and materials which will e in handy if you ever haveto store and ship the product. For maximum protection during storageand shipping, repack the product as it was originally packed at the factory. Installation and Use Safety●Only trained professionals may install the product.●Plugging and unplugging operations are prohibited when the power is on.●Ensure safe grounding of the product.●Always wear a wrist band and insulating gloves.●Do not place the product in an area having frequent or strong shake.●Perform dust removing regularly.●Contact NovaStar for maintenance at any time, rather than have theproduct disassembled and maintained by non-professionals withoutauthorization.●Replace faulty parts only with the spare parts supplied by NovaStar.2 Overview2 OverviewA4s is a high-end receiving card developed by NovaStar, featuring small size and large loading capacity with a single card loading up to 256 x 256(PWM IC) pixels.A4s supports pixel level brightness and chroma calibration by working with NovaLCT and NovaCLB to realize calibration on each pixel. It can effectively remove color difference and greatly improve LED display image consistency, presenting smoother images to users. In addition, it also supports image rotation in 90° increments, creating richer images and improving visual experiences.Software and hardware designs of the A4s concern the user deployment aswell as operating and maintenance scenarios, enabling easier deployment, more stable operating and more efficient maintenance.Advanced hardware design:●The small-size hardware design is applicable to scenarios of small cabinetspace and small pixel pitch.●Use high-density connector which is resistant to dust and vibration andfeatures high stability and high reliability.●Assembly network transformer features simple design and improvedmagnetic patibility, helping user’s products to successfully pass the EMC authentication.Useful software design:●Support for LVDS transmission (Supported by dedicated firmwareprogram).●Support for smart module (Supported by dedicated firmware program).●Support for quick seam correction.●Support for 3D function.●Support for pre-stored image setting of the receiving card.Supporting quick seamcorrection●Support for module Flash management.●Supports monitoring voltage and temperature of itself without using otherperipherals.●Support for monitoring of Ethernet cable munication status (Supported bydedicated firmware program).●Support for 5-pin LCD module.●Support for image rotation in 90° increments.3.2Improvement in MaintainabilitySupporting the smart module(Supported by dedicated firmware program)The smart module is posed of Flash and MCU. Flash could store calibration coefficients and module information. MCU could municate withthe receiving card to realize monitoring over temperature, voltage and wiring munication status for the module. Working with the driver chip, A4s supports open circuit detection on LED.The smart module could make monitoring unit smaller, requiring no independent monitoring card3Features3.1 Improvement in Display EffectFeatures Descriptionand saving cabinet space.Supporting LVDS transmission (Supported by dedicated firmware program)The transmission mode of low-voltage differential signaling (LVDS) is used, which reduces the number of data cables that connect the receiving card's HUB board to the module, increases the transmission distance, improves the signal transmission quality, and better stabilizes the image output.Supporting setting of images pre-stored of the receiving card On NovaLCT, the specified images could be set as the screen startup image and images used when the Ethernet cable is disconnected or no video source signal is available.Supporting module Flash management On NovaLCT, lamp panel Flash could be managed.Supporting monitoring voltage and temperature of itself The voltage and temperature of the receiving card itself can be monitored without using other peripherals. The monitoring data can be checked on NovaLCT.Supporting LCD module Supports NovaStar's general 5-pin LCD module. The LCD module is connected to the HUB board to display temperature, voltage, single operating time and total operating time of the receiving card.Support one-click application of calibration coefficient in module Flash In the event of network outage, hold down the selftest button to read the calibration coefficient in module Flash back to the receiving card.3.4 Improvement in Software ReliabilityFeatures DescriptionSupp o rting readback of firmware version On NovaLCT, the firmware versions of the receiving card can be read back.Supporting readback of configuration file ●On NovaLCT, the receiving card configuration parameters can be backed up to the receiving card.●On Nova L CT, the receiving card configuration parameters can be read back.3.3Improvement in Hardware ReliabilityFeatures DescriptionSupporting d ual-p ower backup detection Two power supplies could be simultaneously connected, and operating status of the power supplies could be detected.Supporting loop backup HUB’s Ethernet port improves the reliability for the serial connection of the receiving c ard through main and standby redundant mechanism. Among the main and standby serial connection lines, if one fails, the other will begin to work to ensure the normal operation of the display.优选Board thickness is not greater than 2.0 mm, and the total thickness (board thickness + thickness of both front panel and back panel) is not greater than 7.5 mm.Unit of the dimension chart is “mm ”. Ground connection is enabled for location hole (GND).4Hardware4.1 AppearanceProduct images provided in this file are for reference only, and the actual productsshall prevail.Models of the high-density receptacle and plug used by A4s are shown in Table 4-1. Table 4-1 Model of high-density connectorType Brand Material Code Receptacle Amphenol FCI 10140609 - 121802 L F PLUGAmphenol FCI10140607 - LF 1218024.2 Dimensions4.3 Indicators4.4 Definition of Data Interface ( Top )Indicator StatusDescriptionStatusindicator (green)Flashing every other 1s.The receiving card works normally, Ethernet cable connection is normal, and video source input is available.Flashing every other 3s.The receiving card works normally, whilethe Ethernet cable connection is abnormal.The receiving card works normally, Ethernetcable connection is normal, while no video source input is available.Rapidly flashing every other 0.5s.Program loading fails in normal operating state, ing to the backup operating state.Rapidly flashing for 8 times every other 1s. The receiving card is in the Ethernet port backup status and the backup is effective.Powerindicator (red)Always on It is always on after the power is on.ash i ng f or 3 ery other 3s.4.4.1 24-Group Parallel DataNCNC68565557NC NC47 48 GNDOperating indicator DCLK4546 OE_BLUENC 113 114 NCNC 115 116 NCGND 117 118 GNDGND 119 120 GND 4.4.2 64-G roup Serial DataData61 Data6354565759NCNCNC bit netNC4041CExtended Functions DescriptionRemended Module Flash Reserved RFU5RFU7Remended SmartModule InterfaceRFU6select only one interface from either the Remended Smart Module Interface or the Remended Module Flash Interface at the same time.5 FirmwareUpdate5Firmware UpdateStep 1 Visit .novastar.tech to download the firmware update package and save it to PC. Step 2 Run NovaLCT and choose User > Advanced Synchronous System User Login to log in.Step 3 Type the secret code "admin " to enter the program loading page.Step 4 Click Browse to select the program (the firmware update package you saved on PC) path and then click U pdate.Step 5 Click Refresh to check current hardware version information.6 Applications优选6Applications A4s is applied to LED display synchronous system which is generally posed ofthe LED display, HUB board, receiving card, video controller and controller peripheral. The receiving card is connected to the display over a HUB board. Synchronous system requires connecting a puter to display the pute r’s images and texts on the LED screen. Structure of the synchronous system is as shown in the following figure.Input voltage DC 3.3 V–5.5 V优选7 Specificati ons A Abbre viatio nRated current0.5 ARated power consumption 2.5 W Operating temperature -20°C –70°C Storage temperatureOperating humidity 10%RH –90%RHDimensions 70.0 mm × 45.0 mm × 7.3 mm Net weight 17.3 g● RoHS● EMC Class BPackingAn antistatic bag and anti-collision foam are prepared for each receiving card.Dimensions of the packing box: 378 mm × 190 mm × 120 mm, each of 40 receiving cards.- 25 °C – 125 °CCertification s7SpecificationsA AbbreviationEEMC Electro m a gnetic patibilityFFPGA Field -P rogrammable Gate ArrayLLED Light Emitting DiodeMMCU Microcontroller UnitRRCFG Receiving Card ConfigurationB TermsB T ermsCalibration coefficientCalibration system generates a group of values for each LED lamp, including information about brightness and chroma. After display calibration, the calibration values of each lamp are just the calibration coefficient.Smart moduleThe smart module is posed of Flash and MCU.Flash could store calibration coefficients and lamp panel information. MCU could municate with the receiving card to realize monitoring over temperature, voltageand wiring munication status, Working with the driver chip, A4s supports opencircuit detection on LED.The smart module could make monitoring unit smaller, requiring no independent monitoring card and saving cabinet space.。
诺瓦科技HDMI接收卡SX100规格书英文版
Rev1.0.0 NS110100308S X100HDMI Receiving CardDeveloped by NovaStar, SX100 is a two-in-one control card combining sending and receiving capabilities, greatly simplifying the connection of LED display system and making user experience much better.A single card is capable of loading 512×384 pixels and supports one HDMI video input and one HDMI video output for cascading. SX100 allows module flash management, smart module management, built-in voltage and temperature detection, etc.X I'A NN OV AS TA RT EC HC O.,L TD.Features●The capacity of a single card is 512×384 pixels.●One HDMI 1.4 video input interface supporting up to 1080p.●One 1080p HDMI video output interface for cascading.● A single card is capable of outputting 32 groups of RGB data.●One 100M Ethernet control interface.●One USB serial control interface.●Test patterns are displayed while self-testing if there is no video input.●Supports module Flash management allowing to store calibration coefficients and moduleinformation.●Supports pixel level brightness and chroma calibration.●Supports temperature monitoring.●Supports supply voltage detection.●Supports configuration file readback.●EU RoHs compliant.●EU CE-EMC compliant.X I'A NN OV AS TA RT EC HC O.,L TD.Interface DefinitionR T E CHC O.,L TD.Note1: 5.0V is recommended as the input power VCC.Note2: RGB data group must be used in pairs.Note3: The signal of operating indicator is low active.Note4: OE_RED, OE_GREEN and OE_BLUE are display enabled pins. In case that OE_RGB are not controlled separately, OE_RED signal is applied. When PWM chip is used, GCLK signal is enabled.Note5: Interfaces for extended functions are reserved. See details in the reference designs of other extended functions.X I'A NN OV AS TA RT EC HC O.,L TD.Appearance FrontBackX I'A NN OV AS TA RT EC HC O.,L TD.ApplicationMultiple cards can be cascaded as below.Static IP address of Ethernet port: 192.168.0.40X I'A NN OV AS TA RT EC HC O.,L TD.DimensionsSX100 dimensions (mm)X I'A NN OV AS TA RT EC HC O.,L TD.Technical ParametersXI'AN NOVASTAR TECH CO., LTD.No. 68, 2nd Keji Road, High-tech Industrial Development Zone, Xi'an 710075, P .R. ChinaPhone: +86-29-68216000 Fax: +86-29-84507072www.novastar.techCopyright © 2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved. E&OEXI 'AN NOVA S T AR T E C H CO .,L。
诺瓦科技LED屏接收卡MRV220-4规格书英文版
SpecificationReceiving Card MRV220-4Product images provided in this file are for reference only , and the actual products shall prevail.Rev1.0.1NS110100268XI 'AN NOVA S TAR T E C H C O .,L T D.FeaturesMRV220 is the receiving card of Nova with 28-group data mode. It has the following features:1) Single card outputs 24-group of RGB data; 2) Single card outputs 28-group of RGB data; 3) Single card support resolution 256x226; 4) Support configuration file read back; 5) Support temperature monitoring;6) Support Ethernet cable communication status detection;7) Support power supply voltage detection; 8) Support high gray-scale high-refresh the high and low brightnessmode refresh. 9) Support pixel by pixel brightness and chromaticity calibration. Brightness and chromaticity calibration coefficients for each LED;10) Comply with RoHS standard;11) Comply with EU CE-EMC Class A standard.X I 'A N N OVA S T A R T E C HCO .,L T D.Output interface definitionUnder all the two different working modes of it, two 60P interfaces can output different data; Each 60p contains two 30P with the same definition. interface is defined as follows: 1) 24-group data modeSupport 24 sets of parallel data ,defined as follows:JH1JH2I 'AN NOVA S TAR T E C HCO .,L T D.2) 28-group data modeSupport 28 sets of parallel data, Serial data decoding is required for scanmode above 1/8 scan (Serial data decoding circuit in the appendix) ,defined as follows:XI 'A N N O V A S T A R T E C HC3) 64-group serial data mode Support 64 sets of serial data, defined as follows:XID. .,L TDimensionsThickness of the board is about 2mm. The overall thickness (board thickness ＋thickness of the components on front and back side) is about 18mm.Unit: mm.XI 'AN NOVA S TAR T E C HCO .,L T D.AppearanceNote: Product images provided in this file are for reference only, and the actual products shall prevail.J2 definition （Connector interface of the network ports ）J9 definition （Indicator light Socket ）Power supply 2 Network PortsIndicator light Male connector Of the Network portsHUBHUBT E C HCO .,L T D.SpecificationsSpecific Model ListTo meet the needs of different customers, Nova has provided morespecific models of the products, including standard products in stock. Other models need to be customized.T A R T E C HC O .,L TAppendixSerial data decoding circuit：X I'A NN OV AS TA RT EC HC O.,L TD.。
诺瓦科技LED接收卡TBR200规格书英文版
TBR200Receiving CardDocument Version: V1.1.0 Document Number:NS110100467SpecificationsXI 'AN N OVA S T AR T EC HCO .,L T D.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC O.,Specifications ContentsContentsChange History (i)1 Safety (1)2 Overview (2)3 Features (3)4 Hardware Structure (4)4.1 Appearance (4)4.2 Dimensions (5)4.3 Definition of Data Interface (6)5 Specifications (9)X I'A NN OV AS TA RT EC HC O.,LT D.Specifications1 Safety1SafetyThis chapter illustrates safety of the TBR200 receiving card to ensure the product’s storage, transport, installation and use safety. Safety instructions are applicable to all personnel who contact or use the product. First of all, pay attention to the following points.● Read through the instructions. ● Retain all instructions. ●Comply with all instructions.Storage and Transport Safety● Pay attention to dust and water prevention. ● Avoid long-term direct sunlight.● Do not place the product at a position near fire and heat.● Do not place the product in an area containing explosive materials. ● Do not place the product in a strong electromagnetic environment. ● Place the product at a stable position to prevent damage or personal injury caused by dropping.●Save the packing box and materials which will come in handy if you ever have to store and ship the product. For maximum protection during storage and shipping, repack the product as it was originally packed at the factory.Installation and Use Safety● Only trained professionals may install the product.● Plugging and unplugging operations are prohibited when the power is on.● Ensure safe grounding of the product.● Always wear a wrist band and insulating gloves.● Do not place the product in an area having frequent or strong shake. ● Perform dust removing regularly.● Contact us for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization. ●Replace faulty parts only with the spare parts supplied by us.XI 'AN N OVA S T AR T EC HCO .,L T D.2 Overview The TBR200 is an M3 series high-density receiving card developed by NovaStar. Compared with traditional receiving cards, the TBR100 is more flexible in usage. The TBR200 has a loading capacity of 512×384 pixels. It supports multiple functions, such as module flash or smart module management, LCD for man-machine interaction, and voltage and temperature detection. Its specific circuit and program design can effectively improve the system’s electromagnetic compatibility, making it easier for users to acquire the EMC certification.X I'A NN OV AS TA RT EC HC O.,LT D.3 Features●Outputs RGB data up to 32 groups per receiving card.●Loads 512×384 pixels per receiving card.●Supports any scan type within 1–1/32 scan, and multiple serial decoding scanapproaches like 595.●Supports mainstream LED driver chips such as regular chips or PWM chips.●Supports high grayscale and high refresh rate.●Supports pixel level brightness and chroma calibration.●Supports free wiring and pixel testing of irregular screens, loading irregularmodules, irregular cabinets or irregular screens in a prefect manner.●Supports multiple hot backup approaches featuring seamless switching, such asloop backup, dual card backup, dual power backup.●Supports LCD screen for man-machine interaction.●Supports built-in voltage and temperature detection.●Supports smart module, which features information storage and managementlike calibration coefficients, module data and parameters, and performs ribbon cable detection and LED pixel level errors detection, making monitor cardsunnecessary.●Features special EMC design, which reduces electromagnetic radiationeffectively.X I'A NN OV AS TA RT EC HC O.,LT D.4Hardware Structure4.1 AppearancePictures shown in this document are for illustration purpose only. Actual product may differ.XI 'AOVA S T AR T EC HCO .,L T D.4.2 DimensionsThe unit of dimension chart is “mm”. The location holes are connected to signalgrounds (GND).X I'A NN OV AS TA RT EC HC O.,LT D.4.3 Definition of Data Interface32 Groups of RGB Parallel Data ModeAR T EC HCO .,L T D.Specifications 4 Hardware StructureX I'A NN OV AS TSpecifications 5 Specifications5 SpecificationsX I'A NN OV AS TA RT。
诺瓦科技LED透明屏接收卡MRV520详细参数说明书英语版
Product images provided in this file are for reference only , and the actual products shall prevail.Rev1.1.2 NS110100115SpecificationsReceiving Card MRV520OverviewNova M3 MRV520 is the EMC version of Nova receiving card MRV320,which is able to effectively reduce the electromagnetic radiation of thewhole system.Features1)Single card outputs 16-group of RGBR 'data;2)Single card outputs 20-group of RGB data;3)Single card outputs 64-group of serial data;4)Single card supports resolution of 256x226;5)Configuration file readback;6)Temperature monitoring;7)Ethernet cable communication status detection;8)Power supply voltage detection;9)Pixel-by-pixel brightness and chromaticity calibration;10)Pre-store picture setting;11)Comply with EU RoHs standard;12)Comply with EU CE-EMC Class B standard.Output Interface DefinitionUnder all the three different working modes of it, two 50P interfaces can o u t p u tdifferent data, and only one common program and software are required. No customized program is needed. Interfaces are defined as follows:Virtual R signal in the last data group of each 50pin hub is decoding signal E at 1/32 scan mode.1) 16- g roup data mode Support i ng 16-group of RGBR 'parallel data, defined as follows:2)20-g roup parallel data modeSupport i ng 20 sets of parallel data, defined as follows:Under serial mode, there are 64 data cables totally. Each cable can drive one LED bar independently.In case of horizontal LED bar, the default is that Data1 drives the first row from the top, and Data64 drives the 64th row. (front view).In case of vertical LED bar, the default is that Data1 drives the first column of from the left, and Data64 drives the 64th column. (front view).3)64- g roup serial data mode Supporting 64 sets of serial data, defined as follows:DimensionsThickness of the board is about 1.7mm. The overall thickness (boardthickness＋thickness of the components on front and back side) isabout 19 mm.Unit: mm.Appearanceproducts shall prevail.J9 definition （ I ndicator Light Socket ）SpecificationsSpecific Model ListTo meet the needs of different customers, Nova has provided more specific models of the products, including standard products in stock. Other models need to be customized.AppendixSerial data decoding circuit：。
诺瓦科技透明LED屏接收卡MRV360规格书
产品规格书
接收 卡 MRV360
本文中的照片仅供参考，请以购买的实物为准
Rev2.1.2 NS110000108
功能特性
MRV360是诺瓦M3系列的接收卡，具备灯板flash管理功能。
具有以下特性：
1)单卡输出RGBR’数据16组；
2)单卡输出RGB数据20组；
3)单卡输出串行数据64组；
4)单卡带载像素为256×226；
5)支持灯板Flash管理，可用来存储校正系数和灯板信息；
6)支持配置文件回读；
7)支持温度监控；
8)支持网线通讯状态检测；
9)支持供电电压检测；
10)支持逐点亮色度校正；
11)支持接收卡预存画面设置；
12)支持连接监控卡；
13)符合欧盟RoHs标准；
14)符合欧盟CE-EMC CLass A标准。
附录
串行译码电路：。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Specifications
Receiving Card MRV365
Product images provided in this file are for reference only , and the actual products shall prevail.
Rev2.1.1
NS110100111
X
I 'A
N N
O
V
A S T
A
R T E C H C O .,L T D
.
Overview
Nova M3 MRV365 is the advance model of Nova receiving card. It is compatible with all functions of MRV320, and increasing the MOM (Memory on Module) interface.
Features
1) Single card outputs 16-group of RGBR 'data;
2) Single card outputs 20-group of RGB data;
3) Single card outputs 64-group of serial data; 4) Single card supports resolution of 256x226； 5) 1 relay control; 6) MOM can store calibration coefficients and the LED module information; 7) Configuration file readback; 8) Temperature monitoring; 9) Ethernet cable communication status detection; 10) Power supply voltage detection;
11) Pixel-by-pixel brightness and chromaticity calibration;
12) Brightness and chromaticity calibration coefficients for each LED; 13) Pre-store picture setting; 14) Able to connect monitoring card.
X
I 'A N N O V
A S T A R T E C H C O .,L T D
.
Output interface definition
Under all the three different working modes of it, two 50P interfaces can output different data, and only one common program and software are required. No customized program is needed. Interfaces are defined as follows:
1) 16-group data mode
Supporting 16-group of RGBR 'parallel data, defined as follows:
Virtual R signal in the last data group of each 50pin hub is decoding
signal E at 1/32 scan mode.
X I 'A
N N
O
V
A S T
A
R T E C H
C
O .,
L T D
.
2) 20-group parallel data mode
Supporting 20 sets of parallel data, defined as follows:
X
I 'A N N O V
A S T A R T E C H
C
O
3) 64-group serial data mode
Supporting 64 sets of serial data, defined as follows:
Under serial mode, there are 64 data cables totally. Each cable can drive one LED bar independently.
X
I 'A N N O V A S T A R T E
In case of horizontal LED bar, the default is, Data1 drives the first row from the top, and Data64 drives the 64th row. (front view).
In case of vertical LED bar, the default is, Data1 drives the first column of from the left, and Data64 drives the 64th column. (front view).
Thickness of the board is about 1.6mm. Overall thickness (board thickness ＋thickness of the components on front and backside) is about 30mm.
RELAY:
Unit: mm
X
I 'A
N N
O
V
A S T
A
R T E C H
C
O .,
L T D
.
Note: Product images provided in this file are for reference only, and the actual
products shall prevail.
J4（MOM interface ）defintion ：
J9 definition （Indicator Light Socket ）
J10 definition （Indicator Socket ）：
S T A R T E C H
D
.
Appendix
Serial data decoding circuit：
X I'A N
N O
V A
S T
A R
T E
C H
C O
.,L T
D.。