诺瓦科技LED控制器MCTRL600规格书英文版
诺瓦科技LED视频控制器VD43规格书英文版
Specifications Video Controller VD43Rev1.0.0 NS160100078X i ’a n N ov a S t a r T e c h C o ., L t d .OverviewVD43 is a professional LED display controller that is powerful in front-end video processing besides the control of display.It supports a full range of digital inputs including 1 DVI, 1 HDMI and 1 SDI and the maximum supported resolution is up to 1920×1200@60Hz. Various utility functions are supported, for example, a full-color LCD screen with resolution of 320*240 is able to support preview function, one-click Map function and all the input and output interfaces support self-lock function.Features1) VD43 has a full range of inputs DVI x1, HDMI x1, SDI x1. The maximum supported resolution is up to 1920×1200@60Hz. VD43supports pixel-by-pixel scaling of the input images according to the resolution of LED display. 2) VD43 supports preview function. Users can preview the real-time situation of input source first via the 320*240 full-color LCD screen to make sure the switching is right.3) VD43 supports MAP function which is able to display physical connections of the LED display cabinets through one click to make it more convenient for users during on-site LED display configuration.4) All the input and output interfaces support self-lock function. Among them, the DMX IN/OUT interface, CITP interface, powerX i ’a n N o v a S t a r T e c h C o .,L t d .interface and 4 Ethernet output interfaces have used NEUTRIK interface to ensure connecting safety and reliability.5) VD43 is capable of achieving system configuration without computer.System configuration can be completed only by operating a knob and a key. All the operations can be finished within several steps.6) VD43 has provided the effects of seamless fast switching andfade-in/out to present screen displays with more professional quality.7) The position and size of PIP are adjustable and can be controlled atwill.8) VD43 has adopted Nova G4 engine which has brought stabledisplays without flickering and scanning lines and given exquisite images with a good sense of depth.9) VD43 is able to implement white balance calibration and colorgamut mapping according to different features of the LEDs used inthe display in order to ensure true color restoration.10) VD43 supports DMX protocol and can connect various controllerswhich support DMX512 interface protocol. 11) VD43 supports high bit video input, 10bit/8bit.12) Loading capacity of video output: 2.3 Million pixels.13) VD43 supports cascading multiple units to load large screens.14) VD43 supports Nova's new generation of pixel-by-pixel calibrationtechnology with fast and efficient calibration process.15) VD43 has adopted innovative designs to achieve smartconfiguration. All screen settings can be completed within a fewX i ’a n N o v a S t a r T e c h C o .,L t d .minutes, which has dramatically reduced the stage preparation time.16) With intuitive OLED menu interface, distinct key indication tosimplify the control of system.Appearance Front Panel①: Operation screen②: Knob, press it to enter and turn it to select or adjust.Three shortcut control keysMenu : When in the default interface, short press this key to enter mainmenu and it is the same function as short pressing the knob.After entering main menu and all levels of submenus, short press the key will act as “ESC” to return to the previous step and long press the key for three seconds to quickly return to default interface.SCALE/OUTPUT: Quickly enter SCALE menuMAP: Enable/Disable MAP functionWhen it is enabled, the operation screen of the controller will show screen settings menu and the LED display will show the physical connections of its cabinets. ④: Three shortcut keys to select signal source.X i ’a n N o v a S t a r T e c h C o ., L t d .Short press to set as preview input source and short press again will setting it to main screen input source. Long press to set as the input source of PIP . Results can be viewed on operation screen during setting. ⑤: USB interface (Type B ) is USB control interface and connected to PC forcommunication.⑥: Preview screen, full-color LCD screen to preview the current situation ofinput source.Rear PanelInputsHDMIHDMI input DVIDVI input SDISDI inputOutputs Monitor -HDMI OUTHDMI monitoring interface LED Out 1、2、3、4 4 Ethernet port outputsControl interfaceETHERNET Ethernet port control(connecting PC forcommunication or access network)USB interface (Type B )USB control(connecting to PC forcommunication or USB cascade input) X i ’a n N o v a S t a r T e c h C o ., L t d .USB interface (Type A ) USB cascade outputDMX IN/OUTConnecting various DMX controller interfaceswhich supports DMX512 interface protocol. CITP ReservedPower supply100-240V AC ~50/60HZ AC power interfaceNote: Type A USB interface on rear panel is not allowed to connect control computer directly.Specifications Input indexPortNumberSpecification DVI 1 VESA standard(supporting 1080i input), supporting HDCP HDMI 1 EIA/CEA-861 standard, meeting HDMI-1.3 standard and supporting HDCP SDI 1 480i 、576i 、720p 、1080i/pOutput IndexPort NumberSpecification OUTPUT 4 4 Ethernet port outputsX i ’a n N o v a S t a r T e c h C o .,L t d .HDMI(monitoring) 1 1280×1024@60Hz1440×900@60Hz 1680×1050@60Hz 1600×1200@60Hz1600×1200@60Hz – Reduced1920×1080@60Hz 2560×816@60Hz 2048×640@60Hz 1920×1200@60Hz2304×1152@60Hz2048×1152@60Hz1024×1280@60Hz1536×1536@60HzCustom output resolution(bandwidthoptimization); Max. horizontal resolution up to 3840 pixels; Max. Vertical resolution up to 1920 pixelsControl InterfacePortNumberDescription USB 2 Upper computer control interface or cascading interface RJ45 1 Ethernet control interface DMX IN/OUT 2 Connecting various DMX controller interfaces which supports DMX512 interface protocol. CITP 1 Reserve d Overall Specifications Input Power AC 100-240V, 50/60Hz Overall Power Consumption 20W Operating Temperature -20~60℃ Dimensions 482.6×293×51.7(mm ) Weight 2.6 KgXi ’a n N o v a S t a r T e c h C o ., L t d .。
诺瓦科技LED显示屏同步控制系统MCTRL660PRO规格书
www.novastar.tech
i
MCTRL660 PRO Independent Controller Specifications
Change History
Change History
Version
Release Date
Description
V1.0.0
height.
CO The MCTRL660 PRO has various video connectors:
Input connectors: 1 × 3G-SDI, 1 × HDMI 1.4a, 1 × single-link DVI.
H Output connectors: 6 ×Gigabit Ethernet port, 2 ×10G optical port. C Loop output connectors: 1 × 3G-SDI LOOP, 1 × HDMI LOOP, 1 × DVI LOOP. TE The MCTRL660 PRO has many industry-leading advanced technologies: R Input of ultra-high color depths, such as 10-bit/12-bit 4:4:4, with input resolutions
H YCbCr 4:2:0 AR TEC 8-bit NOVAST 10-bit/12-bit
Maximum input resolution supported by standard program: 1920×960@60Hz.
Maximum input resolution supported by customized sending card and receiving card programs: 1920×1080@60Hz.
诺瓦科技LED视频处理器VX6s规格书英文版
VX6sAll-in-One Video ControllerDocument Version: V1.0.0Document Number: NS160100264SpecificationsXI'A NN O VAS TA RT E CH CO.,L T D .Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a trademark of X i’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible. Website: www.novastar.techX I 'A NN OV AS TA RT EC HC O.,LT D.1 Overview The VX6s is an all-in-one video controller that integrates sending card functions with video processing. Designed with powerful video processing capability, it supports 7 video inputs and 6 Gigabit Ethernet outputs.Based on the powerful FPGA processing platform, the VX6s supports multiple switching effects, such as quick seamless switching and fade, providing flexible screen control experience and outstanding video presentations.X I 'A NN OV AS TA RT EC HC O.,LT D.2 Features●Features 7 input connectors: 2 × 3G-SDI, 2 × HDMI1.3, 2 × DVI, 1 × USB.●Supports 3 × layers and 1 × OSD.●Supports quick and advanced screen configurations.●Switches the PVW to PGM by pressing only the TAKE button in the switchermode.●Supports PGM preview in the switcher mode.●Supports adjustment of input resolutions and backup of input source.●Supports brightness adjustment of the screen loaded by the VX6s.●Multiple VX6s units can be cascaded.●Automatically scales the image to fit the whole screen.●The maximum video output width is 4096 pixels.● A total of 16 user presets can be created and saved as templates. The templatescan be used directly and conveniently.●Any HDMI or DVI input source can be used as the synchronization signal toachieve vertical synchronization of output.●Features an intuitive OLED screen and clear button indicator lights in the frontpanel, simplifying system control and operation.X I 'A NN OV AS TA RT EC HC O.,LT D.3 Appearance Front PanelX I 'AC HC O.,LT D.Rear PanelXI'A .,LX I 'A NN OV AS TA RT ECSpecifications 4 Dimensions4 DimensionsUnit: mmX I 'A NN OV AS TA RT EC HC O.,LT D.Specifications 5 Applications5 ApplicationsX I 'A NN OV AS TA RT EC HC O.,LT D.。
LED同步控制系统MCTRL4K规格书英文版
Independent Controller
XI'AN
NOVASTAR TECH CO.,LTD. Specifications
Product Version: V1.0.3 Document Number: NS110100428
Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.
XI'AN
www.novastar.tech
iii
Independent Controller MCTRL4K Specifications
1 Safety
1 Safety
D. This chapter illustrates safety of the MCTRL4K independent controller to ensure the T product’s storage, transport, installation and use safety. .,L Safety instructions are applicable to all personnel who contact or use the product. O First of all, pay attention to following points. C Read through the instructions.
Trademark
is a trademark of Xi’an NovaStar Tech Co., Ltd.
Statement
. You are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as D NovaStar). This document is intended to help you understand and use the product. For accuracy and T reliability, NovaStar may make improvements and/or changes to this document at any time and .,L without notice. Any problem in use or any good suggestion, please contact us through ways provided
诺瓦科技LED监控卡MON400规格书英文版
Monitoring CardMON400Document Version:V1.0.0Document Number: NS120100182SpecificationsXI 'AN NOVA S T AR T E C H CO .,LT D.Copyright © 2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a registered trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.X I'A NN OV AS TA RT EC HC O.,L TD.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC O.,L TSpecifications ContentsContentsChange History (ii)1 Safety (1)2 Overview (2)3 Features (3)4 Hardware Structure (4)4.1 Appearance (4)4.2 Dimensions (5)5 Specifications (6)X I'A NN OV AS TA RT EC HC O.,L TD.Specifications1 Safety1SafetyThis chapter illustrates safety of the MON400 monitoring card to ensure the product ’s storage, transport, installation and use safety. Safety instructions are applicable to all personnel who contact or use the product. First of all, pay attention to following points.● Read through the instructions. ● Retain all instructions. ●Comply with all instructions.Storage and Transport Safety● Pay attention to dust and water prevention. ● Avoid long-term direct sunlight.● Do not place the product at a position near fire and heat.● Do not place the product in an area containing explosive materials. ● Do not place the product in a strong electromagnetic environment. ● Place the product at a stable position to prevent damage or personal injury caused by dropping.●Save the packing box and materials which will come in handy if you ever have to store and ship the product. For maximum protection during storage and shipping, repack the product as it was originally packed at the factory.Installation and Use Safety● Only trained professionals may install the product.● Plugging and unplugging operations are prohibited when the power is on. ● Ensure safe grounding of the product.● Always wear a wrist band and insulating gloves.● Do not place the product in an area having frequent or strong shake. ● Perform dust removing regularly.● Contact NovaStar for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization. ●Replace faulty parts only with the spare parts supplied by NovaStar.XI 'AN NOVA S T AR T E C H CO .,LT D.2 Overview The MON400 is a monitoring card used to monitor environment parameters. By connecting various sensors, it can monitor wind speed, wind direction, PM2.5, noise, light brightness, temperature and humidity. It also provides GPS positioning and time synchronization functions. The MON400 is mainly used for street lamps, construction sites, agricultural facilities and small weather stations.The MON400 provides three automatic adjustment ways of the street lamp brightness, which are 5 V PWM, 3.3 V PWM and 0–10 V. It supports Novastar cluster control protocol, allowing to upload the collected environment parameters to the cloud server through wired or wireless network.X I'A NN OV AS TA RT EC HC O.,L TD.3 Features●Supports all kinds of sensors that adopt MODBUS-RTU protocol (the protocoldata format must be hexadecimal).●Supports any sensor with an RS485 connector.●Supports RF communication, and the frequency is 433 MHz.●Provides GPS positioning and time synchronization functions.●Supports wired network or 4G wireless network.●Supports the brightness control of maximum six street lamps simultaneously.●Provides three automatic adjustment ways of the street lamp brightness, whichare 5 V PWM, 3.3 V PWM and 0–10 V.●Supports data auto save function when the network is disconnected.●Supports upgrading firmware programs remotely or through a USB drive.●Supports NovaiCare, NovaStar's cloud-based monitoring platform.●Supports the third-party protocols.X I'A NN OV AS TA RT EC HC O.,L TD.4Hardware Structure4.1 AppearanceNote: Product images provided in this file are for reference only, and the actual products shallXI 'AN NOVA S T AR T E C H CO .,LT D.4.2 DimensionsThe board thickness is approximately 1.6 mm, and the total thickness (boardthickness + thickness of components on both front and rear panels) is not greaterthan 18.5 mm.The unit of dimension chart is “mm”. The location holes are connected to signalgrounds (GND).X I'A NN OV AS TA RT ESpecifications 5 Specifications5 SpecificationsX I'A NN OV AS TA RT。
LED透明屏诺瓦科技LED控制卡MCTRL R5支持画面旋转规格技术大全英文版
MCTRL R5 Independent ControllerSp e cificationsCopyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.TrademarkChange HistoryContentsChange Historyis a trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd.( h ereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability,NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or a ny good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.Independent Controller MCTRL R5SpecificationsContentsChange History (ii)1 1Safety ...............................................................................................................................................1.1Storage and Transport Safety (1)1.2Installation and Use Safety (1)3 2Overview ......................................................................................................................................... 3Features . (4)4Appearance (5)Dimensions (7)5Specifications (68)1 Safety1 SafetyThis chapter illustrates safety of the MCTRL R5 independent controller to ensure theproduct’s storage, transport, installation and use safety.Safety instructions are applicable to all personnel who contact or use the product.First of all, pay attention to following points.●Read through the instructions.●Retain all instructions.●Comply with all instructions.1.1 Storage and Transport Safety●Pay attention to dust and water prevention.●Avoid long-term direct sunlight.●Do not place the product at a position near fire and heat.●Do not place the product in an area containing explosive materials.●Do not place the product in a strong electromagnetic environment.●Place the product at a stable position to prevent damage or personal injurycaused by dropping.●Save the packing box and materials which will come in handy if you ever have tostore and ship the product. For maximum protection during storage and shipping,repack the product as it was originally packed at the factory.1.2 Installation and Use Safety●Only trained professionals may install the product.●Plugging and unplugging operations are prohibited when the power is on.●Ensure safe grounding of the product.●Beware of electric shock hazards.●Always wear a wrist band and insulating gloves.●Do not place the product in an area having frequent or strong shake.●Perform dust removing regularly.1 Safety●Contact NovaStar for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization.●Replace faulty parts only with the spare parts supplied by NovaStar.2 Overview2OverviewDeveloped by NovaStar, the MCTRL R5 is the first independent controller that supports rotation function. With up to 3840×1080@60Hz loading capacity of a single unit, it can support any custom resolution within this range as required, thus meeting the on-site configuration requirements of extra-long or extra-large LED displays. Working with the A8s or A10s, the MCTRL R5 supports free screen configuration on SmartLCT, presenting full rotation of the display screen at any angle, adding diversity to images, and bringing different visual experience to users.The MCTRL R5 is mainly applied to concert control centers, live events, security monitoring, Olympic Games and various sports centers.3 Features4 Appearance3Features● Provides complete input connectors, including 1 × 6G-SDI, 1 × dual-link DVI and1 × HDMI 1.4.● Supports 8 × Gigabit Ethernet ports and 2 × fiber optical outputs. ● Supports rotation of LED screens at any angle.● Adopts innovative architectural design to enable smart configuration, which can greatly shorten the stage preparation time.● Adopts NovaStar G4 engine to realize a perfect image display with no flickering and scanning lines, but fine quality and good sense of depth.● Supports NovaStar's latest pixel level calibration technology with a fast and efficient process.● Implements white balance calibration and color gamut mapping to ensure colors are faithfully reproduced.● Supports screen configuration at any time without a PC.● Supports easy and quick manual adjustment of screen brightness. ● Supports hardware upgrade via USB on the front panel. ●Supports cascading multiple controllers for uniform control.4 Appearance Rear PanelIndependent Controller MCTRL R5 Specifications5DimensionsUnit: mmIndependent Controller MCTRL R5Specifications 7。
诺瓦科技LED视频处理器VP200U用户手册英文版
StatementWelcome to use the product from Xi ’an NovaStar T ech Co., Ltd. (hereinafter referred to as “NovaStar ”). It is our great pleasure to offer this manual to help youunderstand and use the product. We have striven for precision and reliability during the compilation of this manual. The contents of this manual are subject to change without notice. If you have any problem in use or you have any suggestion, please feel free to contact us according to the contact information provided in this manual. We will do our utmost to satisfy your needs. We would like to express our sincere thanks to your suggestions and make assessment for adoption as soon as possible.CopyrightAll the intellectual property rights involved in this document belong to NovaStar.Unauthorized duplication is a violation of applicable laws.Trademarkis the registered trademark of NovaStar.Safety StatementTo avoid potential hazards, please use this unit according to regulations. In the event of breakdowns, non-professionals are not allowed to disassemble it for maintenance without permission. Please contact the after-sales department ofNovaStar. Power outlet should be installed near the unit and easy to reach.High voltage danger: The operating voltage range of this product is100-240V AC.Grounding: This product is grounded through grounding cord of powersupply. Please keep the grounding conductor well grounded.Electromagnetic interference: Keep this product far away from magnets, motors and transformers.Moisture proof: Keep this product in a dry and clean environment. In case of liquid immersion, please pull the power plug out immediately. Keep the product away from flammable and explosive hazardous substance.Prevent liquids or metal fragments from dropping into the product in order to avoid safety accidents.Xi ’an No v aS t ar Te c hC o .,L t d .TABLE OF CONTENTSChapter 1 Overview ............................................................................................... 1 Chapter 2Function Brief ...................................................................................... 2 Input/Output Interface Diagram ..................................................................... 2 Front Panel Control Display Diagram (2)Electrical Parameters ........................................................................................... 4 Chapter 3Signal Connection ............................................................................... 5 Signal Connection ................................................................................................ 5 Multiple Units Connection .. (5)Chapter 4 Menu Operations ................................................................................ 6 Main Interface........................................................................................................ 6 Main Menu . (7)Output Settings ..................................................................................................... 8 PIP .............................................................................................................................. 8 Image Crop . (9)Picture Settings (10)Image Switching ................................................................................................ 10 Misc Settings ....................................................................................................... 11 Uplay settings ..................................................................................................... 12 Language/菜单语言 ........................................................................................... 12 Chapter 5 Quick Operation Guide ..................................................................... 13 Chapter 6 FAQ (16)Xi ’an No v aS t ar Te c hC o .,L t d .Chapter 1OverviewVP200U is a video processor developed for the display system of large-size LED displays. With the leading-edge chips of the industry used and 12-bit digital processing inside, it will bring us clearer images and richer colors. VP200U has adopted technologies such as Faroudja® DCDI de-interlacing video processing, Real Color® real color image processing, Faroudja®TureLife™ video image enhancement, etc. to perfect the display of video image.The maximum output resolution of a single unit is up to 2304x1152 and it allows to customize output resolution. VP200U has multiple special switching effects like signal cut and fade. The size and position of PIP (Picture in Picture) can be set as you wish and AIAO (Any In Any Out) is supported.In addition, VP200U supports USB drive play with the feature of automatic detection and plug-and-play, which has made it much easier and more flexible to use.X i’a n No v aS t ar Te c hC o.,Lt d.Chapter 2 Function BriefInput/Output Interface DiagramFront Panel Control Display DiagramXi ’an d .Shortcut operations:MENU: Press and hold the button to call out brightness adjusting menu when inmain interface; Press and hold the button to directly return to main interface when in menu mode. MODE: Press “MODE” to enter “Load Model” interface and then press “AUTO”to save model.Xi ’an No v aS t ad .Electrical Parametersd.Chapter 3 Signal ConnectionSignal ConnectionTwo sending cards can be installed in the unit and a single unit can drive a LED display with 2304*1152 pixels.The unit supports 8-channel analog and digital signal inputs at most.Tip: Please turn off the power during signal connection.Multiple Units ConnectionNote: This connection mode is applied to synchronous loading of processor models, namely, save the models in advance and then press one button for synchronous load when multiple units are connected.Load model: Press “MODE ” on the front panel and the Load Model interface appears. Press NUM key to load model.Save model: Enter “Load Model ” interface via shortcut and press “AUTO ” to switch to “Save Model ” interface. Then press NUM key to save. It only can save for each unit separately.Xi ’an No v aS t ar T e chC o .,L t d .Chapter 4 Menu OperationsMain InterfaceSwitch on the processor and the main interface on operation screen is shown as follows:1st line: Channel1, signal source, format of input signal; 2nd line: Channel2, signal source, format of input signal; 3rd line: Output, resolution and refresh rate of output signal;4th line: Status line, the meaning of each icon is described as follows;:PIP closed;: PIP opened, Channel1 picture is moved to the top layer; : PIP opened, Channel2 picture is moved to the top layer;: Part function is enabled and size of output image is the same as window size ; : Full screen function is enabled and the size of output image is the same as the input size;: Channel1 Image Crop is closed and the output is complete image; : Channel1 Image Crop is opened and the output is cropped image; : Channel2 Image Crop is closed and the output is complete image; : Channel2 Image Crop is opened and the output is cropped image; : Freeze is opened and current output image is frozen; : Current USB drive is set to single round play; : Current USB drive is set to list round play; : USB drive hasn't been plugged; : USB drive has been plugged;: USB drive has been plugged, but the format of USB drive is not supported.Xi ’an No v aS t ar Te c hC o .,L t d .Main MenuPress the knob when in the main interface to enter menu operation interface, then press the knob to enter submenus. Press “ESC” button to back to previous level and press and hold the knob to directly back to the main interface.Match Method, Horizontal Resolution,Vertical Resolution, Apply, Restore DefaultXi ’d .Output SettingsSet output resolution and output window size.Note: the steps of output settings for LED display: 1)Choose a suitable resolution (the number of horizontal pixels and vertical pixels of the selected resolution are greater than that of the LED display) Set “H -Width” and “V -Height” according to the size of the LED display;2) Horizontal start and vertical start are the same as the horizontal and vertical start of sending card. Generally, they are set to 0;3)Full/Part: It is part display by default after the width and height are set, that is, zoomed-out picture will be shown on LED display; When full display is selected, the output image, the size of which is the resolution selected, may be beyond the screen; 4) Custom resolution: Max. output of a single unit is 2304*1152. It allows to setresolution manually as required according to the corresponding sending card.PIPChannel2 picture, it allows to display in any position and any size.Xi ’an No v aS t ar Te c hC o .,L t d .The channel, position, size, diaphaneity of PIP can be set in this option. Text Overlay: Text can be displayed in PIP .Preset: White On Black, Black On White, Green On Black, Green On White, Red On Black, Red On White. When applying Text Overlay, choose CH2 signal source and preset the corresponding characters and background.Note: PIP is restricted to signal channels, as shown in the table below: “√”denotes PIP can be opened; “×”denotes PIP cannot be opened.Image CropImage crop can be applied to CH1 and CH2;Open “Image Crop ” and set parameters. Then the cropped image will be shownNote: Image crop is only for the input Channel and it will not affect the output of other channels after the signal source is switched. Image crop parameter settings:XN ov a StL t d .The start point of the video window in the figure is(800,100), horizontal width is 500 and vertical height is 400. Only the image in this window will be outputted as shown in the figure above.Picture SettingsImage Mode: Custom/Normal/Soft/Dynamic;Brightness, contrast and color can be adjusted only in custom mode and parameters will be saved automatically after adjustment.Brightness: Press and hold the knob when in main interface to call out brightnessmenu.Image SwitchingNote: Image switching is between CH1 and CH2. It is required to manually set the position and size of PIP before switching.Xi ’an L t d .Image switching interfaceImage switching interface can be opened through the shortcut “TAKE” on the front panel.Tip: The signal sources that can be switched from one to another are the same as the sources of PIP .Misc SettingsFreeze: The output of the processor is frozen at current displayed picture.Instant: If it is closed, a blank screen will appears on the LED display during inputsource switching. If it is opened, the switching effect will kick in.Lock Input Resolution : The resolution of front-end signal source can be setthrough DVI input channel. Point-to-point display can be realized. It will get the best display effect and save bandwidth.Auto: System will read the optimum resolution of rear-end device. Apply: Put the manually set parameters into effect in order to change the resolution of signal source.Xi ’an No v ,L t d .Restore Default: Restore to default parameters.Factory Reset: All the parameters is reset and the settings saved by users is cleared after factory reset.Uplay settingsThe processor will automatically detect and play the files that can be played in the USB drive when USB drive is selected as input. Users can switch through Previous and Next buttons or view the files in the USB drive and select files to be played. Please refer to USB drive Content Browsing and Selecting in Quick OperationGuide for detailed operations.When in USB Play operation interface, you can press shortcut “MENU” to access Uplay settings interface.Language/菜单语言The unit supports both Chinese and English menu.Xi t ar Te c hC o .,L t d .Chapter 5 Quick Operation GuidePower ConnectionSending Card InstallationPIPPIP can be opened directly through the “PIP” button on the front panel.PIP is opened and picture of CH1 is on the top layer.PIP is opened and picture of CH2 is on the top layer.The size and position of main channel and PIP can be set by the options in themenu.Part/Full Display “PART ”Part/Full is closed and the size of output image is same as the size of window.Part/Full is opened and the size of output image is the set resolution.The shortcut is able to quickly switch between zoomed-out window and full-screendisplay.USB drive Content Browsing and SelectingPress “EXT” button to set USB drive as input source. Press the button again to enter USB drive play operation and the indicator lights of six function buttons are on. These six function buttons now are used as six operation buttons of playback. Press Stop button (AUTO) to browse the content of USB drive directly on LEDXi ’an No .display. Turn the knob to select media. As shown in the figure below:Image Freeze “FROZ”Current image is frozen when this option is opened.This function can freeze current image. Operations on signal source cannotinfluence the output image.Auto Adjusting “AUTO”Auto adjusting is used for auto phase adjustment.Model Function “MODE”In some occasions, it is needed to set multiple scene modes. Different scene modescan be saved as different models which can be loaded when needed.Press “MODE” button to load models.In this interface, press “AUTO” to save the model.Current scene can be saved as corresponding model.When multiple units operate together, they can be cascaded by network cables as X i’an No v aS t ar Te ct d.shown in the figure below. Same scene will be saved as uniform model by each processor separately. Load the model on any one of the processors and the model will be loaded synchronously on other processors.Quick image switching TAKEPress TAKE button on the front panel to directly enter signal source switching interface. Now the highlighted signal will be displayed on the top layer and the signal on the bottom layer can be changed through signal source shortcut. After it is changed, press TAKE button again to change the bottom-layer signal to the top layer. In this way, one signal source can be quickly switched to and displayed on the top layer.Signal switching effects can be configured through menus.Press ESC to return to main interface.X i’a n No v aS t ar Te c hC o.,Lt d.Chapter 6FAQNothing is displayed on LED screen. Check whether the power is connected correctly and switched on.DVI has no image output. Check whether the input channel has signal input and it is displayed correctly;Check whether PIP is opened and whether CH2 has signal input and it is displayed correctly;Check whether the output settings are normal and the image window is moved out of the LED display window; Check whether DVI output is connected correctly;If a monitor is connected, please make sure whether it supports output resolution of the processor;Reset the processor and try the operations again to check whether there is image output;VGA input phaseoffsetPress AUTO to perform VGA auto phase adjusting;DVI output image is abnormal Check output settings to make sure parameter settings are reasonable;Check the status line on LCD of the processor to make sure whether other enabled functions have influence on output parameters;Check DVI interface to make sure whether DVI is connected correctly;PIP is displayed abnormally Check CH2 to make sure whether there is signal input and it is displayed normally;Check whether the parameter settings of PIP is normal;Fade is abnormal Check whether CH1 and CH2 have signal input and they are displayed normally;Check whether output and PIP parameters are set correctly;X i’a n No v aS t ar Te c hC o.,Lt d.Display is abnormal Check whether the processor is correctly connected;Check whether parameter settings of the processor are correct;Check whether input source is normal.USB drive cannot be normally identified Check whether the USB drive is well plugged;Check whether the file system of the USB drive is supported;Check whether poor-quality USB extension cable is used;There is no sound during USB play Check whether the current media file has tracks; Check whether “Voice” in “U play settings” is enabled and volume is set to a proper value.Please troubleshoot the devices according to above steps. If problems cannot be solved, please contact our local dealers or customer service department. Since there are components with high voltage inside the unit, please DO NOT maintain it by yourself for the sake of your safety.X i’a n No v aS t ar Te c hC o.,Lt d.。
LED同步控制系统MCTRL600规格书
16W -20℃~60℃ 0%~95% 2.9 Kg 1.5 M 1.5 M
www.novastar.tech
第 4页
音频输入接口 DVI 输入接口 HDMI 输入接口
OUT1~4
4 路网口输出
控制接口
USB
连接计算机,USB 控制接口
UART IN、OUT
级联输入、输出
功能接口
LIGHT SENSOR
光探头接口
电源
AC-100-240V-50/60HZ
交流电源接口
www.novastar.tech
第 2页
尺寸
19 寸 1U 标准机架结构。
西安诺瓦电子科独技立有主规控限格MC公TR书L司600
V2.1.0 NS110000120
概述
MCTRL600 是诺瓦的大带载控制器,支持 HDMI/DVI 视频输入,四路网口输 出, 单台最大带载 2560×960。可级联多台统一控制。
功能特性
1) HDMI/DVI 视频输入; 2) HDMI 音频输入/外部音频输入;
司 3) 支持高位阶视频输入,12bit/10bit/8bit; 公 4) 普通视频源带载能力:1920×1200,2048×1152,2560×960; 有限 5) 高位阶视频源带载能力:1440×900; 技 6) 18bit 灰阶处理与显示; 子科 7) 一路光探头接口; 电 8) 可级联多台进行统一控制; 瓦 9) 支持视频格式:RGB,YCrCb4:2:2,YCrCb4:4:4; 西安诺 10) 标准 1u 机箱设计,独立供电。
www.novastar.tech
第 1页
外观说明
指示灯
设备运行指示灯,无视频源时慢闪(频率为亮 2 秒,灭两秒);
诺瓦科技LED视频切换台J6用户手册英文版
X i’a nN ov aS ta rT ec hC o.,Lt d.User Manual Multi-Screen Splicing Processor J6Rev1.0.1 NS160110162N o v aS ta rT ec hC o.,Lt d.StatementDear users,Welcome to use the J6, a multi-screen splicing processor. This manual is intended to help you to understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this manual at any time without notice. Any problem in using this manual or any good suggestion, please contact us through ways provided in the manual. We will try our best to solve the problems, and evaluate and adopt the suggestions as soon as possible. Thank you very much!Copyright ©2017 NovaStarAll rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of NovaStar.Trademarksis the registered trademark of NovaStar.X i’a na n N ov aS ta rT ec hC o.,Lt d.Table of ContentsSafety Notice (1)Update History (2)Glossary of Terms (3)1Overview (4)System Architecture (4)Software Installation (4)2Appearance (5)Front Panel (5)Rear Panel (6)3Signal Connection (8)4Menu Operations (10)Screen Settings ............................................................... 错误!未定义书签。
诺瓦科技LED全彩接收卡A10s参数设置说明书英文版
Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkwww.novastar.techi Change HistoryChange Historyis a trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welc ome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to asNovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.Product DescriptionTable of ContentsTable of Contents 1 Safety ...............................................................................................................................11.1 Storage and TransportSafety (1)1.2 Installation and UseSafety (1)2 Overview ..........................................................................................................................23Characteristics (4)3.1 Improvement in DisplayEffect (4)3.2 Improvement inMaintainability (5)3.3 Improvement in HardwareReliability (6)3.4 Improvement in SoftwareReliability (6)4 Hardware Structure (8)4.1 Appearance ...................................................................................................................................... (8)4.2 Dimensions ...................................................................................................................................... (8)4.3 Indicator ........................................................................................................................................... (9)4.4 Definition of the Data Interface(Top) ........................................................................................................ 104.4.1 32-GroupParallel Data Interface (10)4.4.2 64-Group Serial DataInterface (14)4.4.3 Reference Design for ExpandableInterfaces (17)Product Description5 Software Structure ........................................................................................................186 Typical Networking (19)7 Specifications (20)A Abbreviation (21)B Terms (22)www.novastar.tech iii1 Safety1 SafetyThis chapter illustrates the safety of the A10s receiving card to ensure products’storage, transport, packing and application safety. Safety description is applicable toall personnel that contact or use the products. Pay attention to following points:●Read throughout the description.●Save the whole description.●Be complied with the whole description.1.1 Storage and Transport Safety●Pay attention to dust and water prevention.●Avoid long-term direct sunlight.●Do not place the products at the position near fire and heat.●Do not place the products in an area containing explosive materials.Product Description●●Place the products at a stable position to prevent damage or personal injurycaused by dropping.●Save the packing box and materials which will come in handy if you ever have toship your products. For maximum protection, repack your product as it wasoriginally packed at the factory.1.2 Installation and Use Safety●Only trained professionals may install the products.●Do not insert and unplug (power cord plug) when the power is on.●Ensure the safe grounding of the device.●Always wear an anti-static wrist band and insulating gloves.●Do not place the products in an area having more or strong shake.●Perform dust removing regularly.●Do not maintain the products without authorization but contact NovaStar as soonas possible.●Replace spare parts only with the same parts supplied by NovaStar.www.novastar.tech 12 Overview2 OverviewA10s is a high-end receiving card developed by NovaStar, featuring small size andlarge loading capacity with the single card loading capacity up to 512×384 (PWM IC)pixel.A10s can work with the independent controller MCTRL R5, making display rotate atany angel. A10s can also work with the independent controller MCTRL4K featuringlarge loading capacity and support HDR10 compliant video input, realizing largerdynamic brightness range and larger color space, and making the image smoother.Product DescriptionA10s supports pixel level brightness and chroma calibration, which removes colordifference effectively and improves display consistency of LED images. In addition, italso supports image rotation in 90° increments, creating richer images and improvingvisual experiences.Software and hardware designs of the A10s concern the user deployment as well asoperating and maintenance scenarios, enabling easier deployment, more stableoperating and more efficient maintenance.Advanced hardware design:●Small size and thinner thickness save space for increasingly narrower cabinetspace and smaller spacing between lamps.●Use high-density connector which is resistant to dust and vibration and featureshigh stability and high reliability.●Assembly network transformer features simple design and improved magneticcompatibility, helping user’s products to successfully pass the EMCauthentication.Useful software design:●Support for HDR10●Support for LVDS transmission (customized function)●Support for low latency (customized function)●Support for smart module (customized function)●Support for auto module calibration●Support for Mapping function●Support for 18Bit+ grayscale output●Support for ClearView●Support for image rotation in 90° increments●Support for pre-stored image setting of the receiving cardwww.novastar.tech 2Product Descriptionwww.novastar.tech 3Table of Contents● Support for lamp panel Flash management● Support for monitoring of temperature, power supply voltage● Support for monitoring of Ethernet cable communication status (customized function)●Support for 5pin LCD module3Characteristics 3.1Improvement in Display EffectProduct Description 3 Characteristics www.novastar.tech 4www.novastar.tech 5Product Description 3 Characteristics3.4ent inSoftwareProduct Description 4 Hardware StructureCO.,TECHNOVASTARXI'ANProduct Description 3 CharacteristicsBoard thickness is not greater than 2.0mm, and the total thickness (board thickness +thickness of both front panel and back panel) is not greater than 9.5mm.4Hardware Structure4.1 AppearanceProduct images provided in this file are for reference only , and the actual products shall prevail.Models of the high-density receptacle and plug used by A10s are shown in table Figure 4-1.Figure 4-1 Model of high-density connector4.2 DimensionsNOVASTAR TECHCO.,LTD.Product Description 4 Hardware Structure Unit of the dimension chart is “mm”. Ground connection is ena bled for location hole(GND).Product Description 4 Hardware Structure4.3 IndicatorCO.,LTD.Product Description 4 Hardware Structure4.4 Definition of the Data Interface (Top)4.4.1 32-Group Parallel Data InterfaceProduct Description 4 Hardware StructureLTD.CO.,TECHNOVASTARXI'ANProduct Description 4 Hardware StructureRefer toNote 2.Product Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureGigabitEthernetportProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware Structure 4.4.2 64-Group Serial Data InterfaceProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureLTD.Note 7. Operating indicator that meets low level is valid.Note 8. OE_RED, OE_GREEN and OE_BLUE are display enabled pins. In casethatOE_RGB are not controlled separately, OE_RED is applied. While PWM chip is used, GCLK signal is enabled.Note 9. RFU1﹘18 are the reserved extended function interfaces. Please refer to“4.4.3 Reference Design for Expandable Interfaces”.Product Description 4 Hardware StructureProduct Description 4 Hardware StructureProduct Description 4 Hardware StructureRFU8 and RFU10 are signal multiplexing expandable interfaces for which theinterfaces of either Recommended Smart Module Interface or RecommendedModule Flash Interface can be selected at a time.Product Description5 Software StructureProduct Description5Software StructureProgram download method:Visit w ww.novastar.tec h a nd choose D ownload > F irmware . On the F irmware section, choose the desired program package to download.XI'ANNOVASTARTECHCO.,LTD.Product Description6 Typical NetworkingProduct Description6Typical NetworkingA10s is applied to LED display synchronous system which is generally composed of the LED display, HUB board, receiving card, video controller and controller peripheral. The receiving card is connected to the display over a HUB board.Synchronous system requires connecting a c omputer to display the computer’s images and texts on the LED screen. Structure of the synchronous system is asshown in the following figure.XI'ANNOVASTARTECHCO.,LTD.Product DescriptionProduct DescriptionProduct DescriptionProduct Description7 Specifications7SpecificationsLTD. XI'ANProduct DescriptionA AbbreviationProduct DescriptionAAbbreviationE EMC Electro m a gnetic CompatibilityF FPGA Field - P rogrammable Gate ArrayLLED Light E mitting Diode MMCU Micro c o ntroller UnitRRCFGReceiving Card ConfigurationXI'ANNOVASTARTECHCO.,LTD.Product DescriptionXI'ANNOVASTARTECHCO.,LTD.B TermsBTerms18Bit+Specify the grayscale of LED displays. Enabling 18 bit mode on NovaLCT could improve LED display grayscale by 4 times, and therefore avoid grayscale losscaused by brightness reduction and make images finer. ClearViewDisplay screen effects. Enable ClearView on NovaLCT to adjust the texture, size and contrast in different area based on human visual system to make image more realistic. Calibration coefficientCalibration system generates a group of values foreach LED lamp, including information about brightness and chroma. After display calibration, the calibration values of each lamp are just the calibration coefficient. Smart moduleThe smart module is composed of Flash and MCU.Flash could store calibration coefficients and lamp panel information. MCU could communicate with the receiving card to realize monitoring over temperature, voltage and wiring communication status, as well as LED error detection. The smart module could make monitoring unit smaller, requiring no independent monitoring card and saving cabinet space.MappingAfter the Mapping function is enabled on NovaLCT, the target cabinet will display the cabinet number and Ethernet port information, and the user could get the receiving card’s location and wiring route.Error detectionProduct DescriptionPerform status detection for each LED lamp. If the LED lamp fails, the user couldnotify in a timely manner upon monitoring system.。
诺瓦科技LED多功能卡MFN300规格书英文版
Specifications Multifunction Card MFN300Product images provided in this file are for reference only , and the actual products shall prevail.Rev2.1.0NS110100087XI 'AN NO VA S T AR T E C H CO .,LT D.FeaturesNova M3 MFN300 is a multifunction card with a variety of auxiliaryfunctions. It has the following features:1)RS232 serial or Gigabit Ethernet port communication.2)Ethernet port connection between two receiving cards or at the end.3)Timer function which is able to replace timer and delayer.4)Temperature detection of power distribution box.5)Humidity detection of power distribution box.6)Audio output.7)4-way light sensor connection to achieve automatic brightnessadjustment.8)Temperature and humidity module connection.9)8-way power switch control.X I'A NN OV AS TA RT EC HC O.,L TD.Thickness of the board is about 1.6mm. The overall thickness (board thickness+thickness of the components on front and back side) is about 20mm.Unit: mm.X I'A NN OV AS TA RT EC HC O.,L TD.Note: Product images provided in this file are for reference only, and the actual products shall prevail.X I'A NN OV AS TA RT EC HC O.,L TD.Connection●Connect multifunction card to computer directly by RS232 serialcable.●Connect multifunction card between sending card (or independentcontroller) and the first receiving card.●Connect multifunction card between any two receiving cards.●Connect multifunction card to the last receiving card.X I'A NN OV AS TA RT EC HC O.,L TD.Software ConfigurationRun NovaLCT-Mars control software and click Function Card button to open Function Card Management page.Use the menu in above Figure to configure multifunction card, including Add, Remove, Rename a Function card, Modify Serial Port and ReplaceSerial Port.Add:Serial port: Add a multifunction card which is connected to the serialport.Ethernet port: Add a multifunction card which is connected to theEthernet port.Remove: Remove the selected node which could be a multifunction card, Ethernet port, sending card or serial port.XI 'AN NOVA S T AR T E C H CO .,LT D.Rename: Rename the selected multifunction card.Serial port operation:Click icon to select Modify Serial Port or Replace Serial Port.Modify Serial Port: Set the selected serial port as one that no multifunction card has been configured for.Replace Serial Port: Replace the selected serial port with one which is configured but the configured device type is different from that of actually connected, or is actually not connected.Note: The icon is only available when the following requirements are satisfied: The selected node is a serial port; the device connected to it does not match the one configured to it, or the serial port is not connected.X I'A NN OV AS TA RT EC HC O.,L TD.SpecificationsX I'A NN OV AS TA RT EC HC O.。
诺瓦科技光探头NS060-5A规格书英文版
NS060-5ALight SensorDocument Version: V1.0.0 Document Number:NS110000372SpecificationsXI 'AN NOVA S T AR T E C H CO .,LT D.Copyright © 2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a registered trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice.Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.X I'A NN OV AS TA RT EC HC O.,L TD.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC O.,L TDSpecifications ContentsContentsChange History (ii)Contents ............................................................................................................................................. i ii1 Overview (1)2 Features (1)3 Operating Conditions (2)4 Dimensions (3)5 Assembly (4)6 Specifications (5)X I'A NN OV AS TA RT EC HC O.,L TD.Specifications1 Overview1OverviewThe NS060-5A is a light sensor designed and produced by NovaStar, which can beconnected to NovaStar sending cards, asynchronous cards or multifunction cards for monitoring ambient brightness, thus achieving automatic brightness adjustment of LED display.2Features● Monitors the ambient brightness to achieve automatic brightness adjustment ofLED display.●Can be connected to sending cards (MSD300/600, MCTRL300, etc.), asynchronous cards or multifunction cards.● 5-meter standard cable, which can be extended to 100 meters● Mildew, moisture and salt-mist resistant design, ideal for outdoor applications ●No external power supply is required.XI 'AN NOVA S T AR T E C H CO .,LT D.Specifications 3 Operating Conditions3 Operating ConditionsThe NS060-5A light sensor can work with devices that have light sensor connectors,such as sending cards, asynchronous cards or multifunction cards, and it should beplaced in the same environment with the LED display.The connection between the light sensor and the multifunction card is shown as below.Figure 3-1 Connection to multifunction card MFN300X I'A NN OV AS TA RT EC HC O.,L TD.Specifications 4 Dimensions4 DimensionsFigure 4-1 Dimensions of NS060-5A light sensorUnit: mmX I'A NN OV AS TA RT EC HC O.,L TD.Specifications5 Assembly5AssemblyPrepareInstallCompleteTips: It is recommended to apply outdoor waterproof adhesive to the joint of the sensorbody and the substrate after the installation is completed, and check it regularly.XI 'AN NOVA S T AR T E C H CO .,LT D.Specifications 6 Specifications6 SpecificationsX I'A NN OV AS TA R.。
诺瓦科技LED显示屏接收卡X3C规格书英文版
X3CReceiving CardSpecificationsProduct Version: V1.0.1 Document Number: NS110100349XI 'AN NOVA S T AR T E C H CO .,L T D.Copyright ©2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a registered trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.X I'A NN OV AS TA RT EC HC O.,L TD.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC OSpecifications ContentsContentsChange History .................................................................................................................. i i Contents ............................................................................................................................ i ii1 Overview (1)2 Features (2)3 Appearance (3)4 Dimensions (4)5 Definition of Pins (5)6 Specifications (7)X I'A NN OV AS TA RT EC HC O.,L TD.1 Overview The X3C is a small-size and full-function receiving card. It is designed with stamp hole-shaped connectors and can be welded to the adapter plate like an integrated chip. A single X3C card can load up to 256×226 pixels and supports multiple functions, such as brightness calibration, chroma calibration, voltage measurement and temperature measurement.X I'A NN OV AS TA RT EC HC O.,L TD.2 Features● A single card supports 256×226 pixels.● A single card supports parallel output of eight sets of RGB signals, and thesignals can be extended to 16 sets of parallel data through the D extensionsignal.●Supports any type of scanning modes from 1 scan to 1/32 scan, and supports theserial decoding and scanning mode that uses 74HC595 and so on.●Supports all mainstream LED driver ICs, such as general chips and PWM chips.●Supports high grayscale and high refresh rate.●Supports pixel level brightness and chroma calibration.●Supports configuration file readback.●Supports detection of Ethernet cable communication status.●Supports settings of displays stored in the sending card.●Supports voltage and temperature measurement.●Complies with the European Union’s CE-EMC standard.X I'A NN OV AS TA RT EC HC O.,L TD.3 Appearance Product images provided in this file are for reference only, and the actual products shall prevail.X I'A NN OV AS TA RT EC HC O.,L TD.Specifications4 Dimensions4DimensionsUnit: mmThe board thickness is not greater than 2.0 mm, and thickness of the highestcomponent on front side is not greater than 3.5 mm.XI 'AN NOVA S T AR T E C H CO .,LT D.5Definition of PinsXI 'T AR T E C H CO .,LT D.X I'Receiving Card X3C Specifications6 Specificationswww.novastar.tech 76SpecificationsXI 'AN NOVA S T AR。
诺瓦科技LED显示屏控制软件SmartLCT使用说明英文版
V3.2.0 2017-11-30
1. Double seam brightness correction is added in Seam Brightness Adjustment.
2. Monitoring service and platform 3. Cabinets can rotate in 90°increments. 4. Beacon 5. Receiving card program and configuration information
Trademark
is a trademark of Xi'an NovaStar Tech Co., Ltd.
Statement
You are welcome to use the product of Xi'an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. If you experience any problems in use or have any suggestions, please contact us via contact info given in document. We will do our best to solve any issues, as well as evaluate and implement any suggestions.
诺瓦科技Mini LED控制卡LED发送卡MCTRL4K规格参数说明英文版
Specifications Independent Controller MCTRL4KRev1.0.1 NS1601000126OverviewFeatures 1) Complete video input interfaces: DP1.2 x 1, HDMI2.0 x 1, dual-link DVI 10) Multiple controllers are able to be cascaded for uniform control. DimensionsAppearanceFront panelx 2;2) Supports 16-channel Neutrik Gigabit Ethernet outputs and 4-channel optical fiber outputs and maximum loading capacity of a single unit up to 4096x2160@60Hz; 3) Supports two operating modes during dual-link DVI input: mosaicand multi-card;4) Innovative design to enable smart configuration which has greatlyshortened the time for stage preparation;5) NovaStar's G4 engine to create stable and flicker-free pictures withoutMCTRL4K is an independent master controller developed by NovaStarwith an epoch-making significance. The loading capacity of a single unitis up to 4096x2160@60Hz, which is able to meet the on-siterequirements of oversized LED displays. MCTRL4K makes it easier to create stunning visual effects for users.MCTRL4K also can be used as two independent master controllers, which makes it more flexible to load LED displays.The design of MCTRL4K is innovative. It allows to configure a display at any time without PC. Various video inputs such as DP , HDMI, dual-link DVI etc. and outputs of16- c hannel Neutrik Gigabit Ethernet ports as well as 4-channel opticalfiber ports are supported.A: Input status of signal source. Blue indicates it has signal while gray indicates no signal.B: Current input source and its resolution,information of two DVI sources will be displayed alternately here when dual-link DVI is selected as input.The top section of the screen displays productand its IP address. The meaning s of other sections are described asbelow:Temperature inside the controller;Brightness of the LED display;DVI1 and DVI2 sources are not synchronous(in mosaic mode), DVI1 and DVI2 sources are synchronous(in mosaic mode);Control interface is not connected;USB port is used as control interface;Ethernet port is used as control interface;Operation screen is not locked;Operation screen is locked.Specifications。
诺瓦科技LED显示屏接收卡TBR200规格书英文版
TBR200Receiving CardDocument Version: V1.1.0 Document Number:NS110100467SpecificationsXI 'AN N OVA S T AR T EC HCO .,L T D.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC O.,Specifications ContentsContentsChange History (i)1 Safety (1)2 Overview (2)3 Features (3)4 Hardware Structure (4)4.1 Appearance (4)4.2 Dimensions (5)4.3 Definition of Data Interface (6)5 Specifications (9)X I'A NN OV AS TA RT EC HC O.,LT D.Specifications1 Safety1SafetyThis chapter illustrates safety of the TBR200 receiving card to ensure the product’s storage, transport, installation and use safety. Safety instructions are applicable to all personnel who contact or use the product. First of all, pay attention to the following points.● Read through the instructions. ● Retain all instructions. ●Comply with all instructions.Storage and Transport Safety● Pay attention to dust and water prevention. ● Avoid long-term direct sunlight.● Do not place the product at a position near fire and heat.● Do not place the product in an area containing explosive materials. ● Do not place the product in a strong electromagnetic environment. ● Place the product at a stable position to prevent damage or personal injury caused by dropping.●Save the packing box and materials which will come in handy if you ever have to store and ship the product. For maximum protection during storage and shipping, repack the product as it was originally packed at the factory.Installation and Use Safety● Only trained professionals may install the product.● Plugging and unplugging operations are prohibited when the power is on.● Ensure safe grounding of the product.● Always wear a wrist band and insulating gloves.● Do not place the product in an area having frequent or strong shake. ● Perform dust removing regularly.● Contact us for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization. ●Replace faulty parts only with the spare parts supplied by us.XI 'AN N OVA S T AR T EC HCO .,L T D.2 Overview The TBR200 is an M3 series high-density receiving card developed by NovaStar. Compared with traditional receiving cards, the TBR100 is more flexible in usage. The TBR200 has a loading capacity of 512×384 pixels. It supports multiple functions, such as module flash or smart module management, LCD for man-machine interaction, and voltage and temperature detection. Its specific circuit and program design can effectively improve the system’s electromagnetic compatibility, making it easier for users to acquire the EMC certification.X I'A NN OV AS TA RT EC HC O.,LT D.3 Features●Outputs RGB data up to 32 groups per receiving card.●Loads 512×384 pixels per receiving card.●Supports any scan type within 1–1/32 scan, and multiple serial decoding scanapproaches like 595.●Supports mainstream LED driver chips such as regular chips or PWM chips.●Supports high grayscale and high refresh rate.●Supports pixel level brightness and chroma calibration.●Supports free wiring and pixel testing of irregular screens, loading irregularmodules, irregular cabinets or irregular screens in a prefect manner.●Supports multiple hot backup approaches featuring seamless switching, such asloop backup, dual card backup, dual power backup.●Supports LCD screen for man-machine interaction.●Supports built-in voltage and temperature detection.●Supports smart module, which features information storage and managementlike calibration coefficients, module data and parameters, and performs ribbon cable detection and LED pixel level errors detection, making monitor cardsunnecessary.●Features special EMC design, which reduces electromagnetic radiationeffectively.X I'A NN OV AS TA RT EC HC O.,LT D.4Hardware Structure4.1 AppearancePictures shown in this document are for illustration purpose only. Actual product may differ.XI 'AOVA S T AR T EC HCO .,L T D.4.2 DimensionsThe unit of dimension chart is “mm”. The location holes are connected to signalgrounds (GND).X I'A NN OV AS TA RT EC HC O.,LT D.4.3 Definition of Data Interface32 Groups of RGB Parallel Data ModeAR T EC HCO .,L T D.Specifications 4 Hardware StructureX I'A NN OV AS TSpecifications 5 Specifications5 SpecificationsX I'A NN OV AS TA RT。
诺瓦科技光电转换器FE600规格书英文版
FE600Fiber ConverterVersion : V1.0.0Document Number : NS110100455SpecificationsXI 'AN NOVA S T AR T E C H CO .,LT D.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC O.,L TSpecifications ContentsContentsChange History (i)1 Overview (1)2 Features (1)3 Appearance (2)3.1 Front panel (2)3.2 Rear panel (2)4 Dimensions (3)5 Specifications (4)X I'A NN OV AS TA RT EC HC O.,L TD.Specifications1 Overview1OverviewFE600 is a fiber converter developed by NovaStar independently, which enables thesignal conversion between optical fiber and twisted pair cables. It allows long-distance signal transmission that is stable and not be easily interfered. Being easy to use, FE600 makes it convenient to connect terminal devices as well as simpler for onsite connections.2Features● Supports 16-channel Neutrik Ethernet inputs and outputs.● Supports 4-channel optical fiber inputs/outputs. Two of them are masterinput/output channels and the other two are backups.● With dual-power redundancy backup inside for more stability and reliability. ● Two types of power interfaces (3-pin power socket and PowerCON) are supported to meet different needs of customers.● With various indicator lights on the front panel, each status can be showed clearly.●With USB and Ethernet control interfaces making it more flexible and much easier to connect main control computers.XI 'AN NOVA S T AR T E C H CO .,LT D.Specifications 3 Appearance3 Appearance 3.1 Front panelIndicator lights are on the middle area of the front panel:●Indicator lights of Ethernet port 1~8 corresponding to OPT1/OPT3 are on theupper half of this area. Lights on the first line indicate whether the connection ofeach port is available and lights on the second line indicate whether the port hasdata transmission.●Power indicator light and overall status indicator light are on the middle of thisarea.●Indicator lights of Ethernet port 9~16 corresponding to OPT2/OPT4 are on thelower half of this area. Lights on the first line indicates whether the connection ofeach port is available and lights on the second line indicate whether the port hasdata transmission.●In addition, the small triangle lights near “OPT”indicate whether theconnection of each optical fiber port is available.Note: OPT1 is corresponding to Ethernet port 1~8 and OPT2 is corresponding to Ethernet port 9~16. Inaddition, OPT3 is the backup of OPT1 and OPT4 is the backup of OPT2.3.2 Rear panelX I'A NN OV AS TA RT EC HC O.,L TD.Specifications4 Dimensions4Dimensions单位(mm )XI 'AN NOVA S T AR T E C H CO .,LT D.Specifications 5 Specifications5 SpecificationsX I'A.。
诺瓦科技LED显示屏智能配屏软件SmartLCT用户手册
版权所有© 西安诺瓦电子科技有限公司2018。
保留一切权利。
非经本公司书面许可,任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部,并不得以任何形式传播。
商标声明是诺瓦科技的注册商标。
声明欢迎您选用西安诺瓦电子科技有限公司(以下简称诺瓦科技)的产品,如果本文档为您了解和使用产品带来帮助和便利,我们深感欣慰。
我们在编写文档时力求精确可靠,随时可能对内容进行修改或变更,恕不另行通知。
如果您在使用中遇到任何问题,或者有好的建议,请按照文档提供的联系方式联系我们。
对您在使用中遇到的问题,我们会尽力给予支持,对您提出的建议,我们衷心感谢并会尽快评估采纳。
SmartLCT 显示屏配置软件用户手册更新记录更新记录SmartLCT 显示屏配置软件 (ii)更新记录 (ii)目录 (iii)用户手册目录目录1 简介 (1)系统架构......................................................................................................................................................2配置列表 (2)软件安装 (3)注意事项 (32)界面介绍 (4)3 语言设置 (6)4 离线操作 (7)界面介绍......................................................................................................................................................7新建项目 ......................................................................................................................................................9显示屏配置 ................................................................................................................................................104.3.1 添加箱体 (10)4.3.2 配置箱体走线 (11)4.3.3 箱体偏移 (12)4.3.4 箱体旋转 .................................................................................................................................................12发送配置信息 ............................................................................................................................................13其他操作 ....................................................................................................................................................144.5.1 添加设备 (14)5 在线操作 (17)界面介绍 (17)新建项目 (21)显示屏配置 (22)5.3.1 添加箱体 (22)5.3.2 配置箱体走线 (23)亮暗线调节 (23)5.4.1 界面介绍 (23)5.4.2 亮暗线参数调节 (25)SmartLCT 显示屏配置软件用户手册目录多批次调节................................................................................................................................................26监控 ...........................................................................................................................................................275.6.1 实时监控 (28)5.6.2 误码率检测 (29)5.6.3 版本信息 (29)5.6.4 监控配置.................................................................................................................................................29发送配置信息 ............................................................................................................................................30V-Sender (30)5.8.1 如何进入V-Sender? (30)5.8.2 工具栏功能介绍 (31)5.8.3 添加设备 (31)5.8.4 信息 (32)5.8.5 控制 (32)5.8.6 模板设置 (33)5.8.7 设备属性 (33)5.8.8 画中画 (34)其他操作 (36)5.9.1 热备份 (36)5.9.2 Mapping .................................................................................................................................................. 366 特色功能 . (37)积木式搭屏 (37)90°倍数旋转 (37)360°任意旋转 (37)显示屏测试 (39)接收卡配置参数更新与回读 (40)主控设备和接收卡信息回读 (40)接收卡程序升级 (40)主控设备程序升级 ..................................................................................................................................... 40导出图 . (40)SmartLCT显示屏配置软件用户手册1简介1简介概述SmartLCT是诺瓦新一代显示屏配置软件,配合LED控制器实现对各种复杂LED显示屏的智能配置,其中包括:积木式配屏、离线(在线)设计、亮暗线调节、箱体旋转等,使显示屏的配置更加简单,致力于提升客户体验。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
Specifications Independent Controller MCTRL600
V2.1.0
NS110100121
X
i ’a n N o
v a S t a r T
e c
h C
o .,
L t d .
Overview
MCTRL600 is an advanced model of Nova controllers, which supports extra-large resolution. With HDMI/DVI video input and four Ethernet port outputs, a single unit is able to load 2560×960. Multiple units can be cascaded for uniform control.
Feature
1) HDMI/DVI input;
2) HDMI/external audio input;
3) 12bit/10bit/8bit HD video source;
4) Resolution supported: 2048×1152,1920×1200,2560×960; 5) Resolution supported: 1440×900 (12bit/10bit);
6) 1 light sensor interface; 7) Cascading supported;
8) 18bit gray scale processing and presentation; 9) Video format: RGB, YCrCb4:2:2, YCrCb4:4:4;
10) Standard 1U housing and independent power supply.
X
i ’a n
N o
v a
S t a
r T
e c
h C
o .,
L t d .
Appearance
during authorization.
INPUTS X i’a t a r
T e c
h C
.
Dimensions
19" 1U Standard Cabinet.
Unit: mm
X
i ’a n
N o
v a
S t a
r T
e c
h C
o .,
L t d .
Specifications
.
FCC Caution
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
X
i ’a n
N o
v a
S t a
r T
e c
h C
o .,
L t d .。