MI-P6TW-IXV中文资料
博乐583和563XL音频宏缩放超声8音频摄影机说明书
MMBT3906 40V PNP 小信号晶体管 SOT23 数据手册说明书
MMBT3906Features• Epitaxial Planar Die Construction• Ideal for Medium Power Amplification and Switching • Complementary NPN Type: MMBT3904• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) • Halogen and Antimony Free. “Green” Device (Note 3) • Qualified to AEC-Q101 Standards for High Reliability • PPAP Capable (Note 4)Mechanical Data• Case: SOT23• Case Material: Molded Plastic, “Green” Molding Compound UL Flammability Classification Rating 94V-0 • Moisture Sensitivity: Level 1 per J-STD-020 • Terminals: Finish—Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 •Weight: 0.008 grams (Approximate)Ordering Information (Notes 4 & 5)Product Status Compliance Marking Reel Size (inches)Tape Width (mm)Quantity per ReelMMBT3906-7-F Active AEC-Q101 K3N 7 8 3000 MMBT3906Q-7-F Active Automotive K3N 7 8 3000 MMBT3906Q-13-F Active Automotive K3N 13 8 10,000 MMBT3906-13-FActive AEC-Q101 K3N 13 8 10,000Notes:1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.2. See https:///quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.4. Automotive products are AEC-Q101 qualified and are PPAP capable. Refer to https:///quality/.5. For packaging details, go to our website at /products/packages.html.Marking InformationDate Code KeyYear 2015 2016 2017 2018 2019 2020 2021 2022 CodeC DE F G HI JTop ViewSOT23Device SymbolTop View Pin-OutK3NY MK3N = Product Type Marking Code YM = Date Code Marking Y or Y = Year (ex: E= 2017)M or M = Month (ex: 9 = September)Absolute Maximum Ratings(@T A = +25°C, unless otherwise specified.)Thermal Characteristics(@T A = +25°C, unless otherwise specified.)Characteristic Symbol Value UnitPower Dissipation (Note 6)P D310mW (Note 7) 350Thermal Resistance, Junction to Ambient (Note 6)RϴJA403°C/W (Note 7) 357Thermal Resistance, Junction to Leads (Note 8) RϴJL350 °C/W Operating and Storage Temperature Range T J,T STG-55 to +150 °CNotes: 6. For a device mounted on minimum recommended pad layout 1oz copper that is on a single-sided FR4 PCB; the device is measured under still air conditions while operating in a steady-state.7. Same as Note 6 except the device is mounted on 15 mm × 15mm 1oz copper.8. Thermal resistance from junction to solder-point (at the end of the leads).9. Refer to JEDEC specification JESD22-A114 and JESD22-A115.Thermal Characteristics and Derating InformationTransient Therm al Im pedancePulse Width (s)Pulse Power DissipationPulse Width (s)MElectrical Characteristics(@T A = +25°C, unless otherwise specified.)Note: 10. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%.Typical Electrical Characteristics (@T A = +25°C, unless otherwise specified.)h , D C C U R R E N T G A I NF E I , COLLECTOR CURRENT (mA)Figure 1 Typical DC Current Gainvs. Collector CurrentC V , C O L L E C T O R -E M I T T E R S A T U R A T I O N V O L T A G E (V )C E (S A T )I , COLLECTOR CURRENT (mA)Figure 2 Typical Collector-Emitter Saturation Voltagevs. Collector CurrentC 0.1110V , B A S E -E M I T T E R (V )B E (S A T )S A T U R A T I O N V O L T A G E I , COLLECTOR CURRENT (mA)Figure 3 Typical Base-Emitter Saturation Voltagevs. Collector CurrentC 100C A P A C I T A N C E (p F )V , REVERSE VOLTAGE (V)Figure 4 Typical Capacitance Characteristics RPackage Outline DimensionsPlease see /package-outlines.html for the latest version.SOT23SOT23Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.502.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.803.00 2.90 J 0.013 0.10 0.05 K 0.890 1.00 0.975 K1 0.903 1.10 1.025 L 0.45 0.61 0.55 L1 0.25 0.55 0.40 M 0.085 0.150 0.110 a 0° 8° -- All Dimensions in mmSuggested Pad LayoutPlease see /package-outlines.html for the latest version.SOT23。
Tektronix 产品数据用户手册说明书
Infiniium 80000 Series OscilloscopesInfiniiMax II Series Probes13, 12, 10, and 8 GHz OscilloscopeMeasurement SystemsData Sheet•13, 12, 10, and 8GHz bandwidthreal-time oscilloscopes with upto 40GSa/s sample rate•Up to 2Mpts MegaZoom deepmemory at 40GSa/s samplerates and 64Mpts MegaZoomdeep memory at 4GSa/s•InfiniiMax II probing system withup to 13GHz bandwidth•Trigger jitter less than 500fs rms•Lowest vertical noise floor andlowest jitter measurement floorin the industry•After-Burner upgrade program protects your Infiniium 80000Series investment •Electronic attenuators eliminate the reliability and ESD discharge concerns associated withmechanical attenuator relays •Unrivaled InfiniiMax probing accessories support browsing,solder-in, socket use, and SMAuse models all at 12GHz orgreater bandwidth•Award-winning userinterface based on MicrosoftWindows®XP Pro supportsCD-RW, dual-monitor, andthird-party software packagesAgilent DSOsBreaking the 10 GHzPerformance Barrier The highest signal integritymeasurement system availableAn oscilloscope and probingsystem with bandwidths up to13GHz and a maximum samplerate of 40GSa/s is required tomeet the performance needs ofengineers designing state of the arthigh-speed serial communicationlinks and other ultra-high-speedelectronic systems. Modernindustry bus standards such asFibre Channel, Fully BufferedDIMM, Serial ATA, Serial AttachedSCSI, and PCI-Express haveperformance points in the 4 to8.5Gb/s range. Proprietaryhigh-speed serial buses canalso have clock rates in the 4 to8.5Gb/s range as well as risetimes faster than 50ps. Scopeswith bandwidths of 8, 10, 12, or13GHz are required to capture2Benefitsthe frequency harmonics of such high-speed signals and make accurate and repeatable measurements on them.Agilent’s award-winning InfiniiMax probing system set the standard for probing systems and the rest of the oscilloscope industry is now following this trend-setting architecture. Agilent’s InfiniiMax II probing system takes thisinnovation to an unmatched level of performance and usability.U.S. Navy imagery used in illustration without endorsement expressed or implied.3/find/infiniimaxII45/find/infiniimaxIIKey trends in theelectronics market•Technologies with dramatically increased clock speeds and edge rates have emerged.•Very fast serial differential buses are being used to save board space, reduce power and provide better noise immunity.•Densely packed circuit boards,often with stacked daughter boards, increase the need to probe in very hard-to-reach places.Key benefits of the 80000 and InfiniiMax II Series•Up to 13GHz bandwidth can track even the fastest signal speeds.• A sample rate of up to 40GSa/s can measure high-speed differential buses reliably and repeatedly.•The innovative InfiniiMax II probing system supports even the most demanding mechanical access requirements without sacrificing performance.6•The full real-time bandwidth of the oscilloscope is supported by up to a 40GSa/s sample rate.•This industry-leading sample rate produces more accurate and repeatable measurements,avoiding measurement error and signal aliasing due to under sampling, as shown above. This is especially important for high-quality jitter measurements.•The combination of up to13GHz bandwidth and 40GSa/s sample rate makes the 80000Series ideal for designs that include: PCI-Express II, Serial ATA II/III, 6Gbs SAS, 4.25 and 8.5Gbs Fibre Channel, 4.8Gbs Fully Buffered DIMM, or other high-speed electronic signals.The DSO 80000 Series Produces Accurate and Repeatable Measurements5 Gb/s real-time eye diagram with DSO81004A 8 Gb/s real-time eye diagram with DSO81204A7/find/infiniimaxIIE2690A Timing Interval and Jitter Analysis software The Agilent E2690A Advanced Time Interval and Jitter Analysis Software, licensed from Amherst Systems Associates (ASA); offers the most powerful and comprehensive set of tools for exploratory debug of jitter, and it is remarkably easy to use. The E2692A Basic Time Interval and Jitter Analysis Software offers the basic tools you need for jitter debug with the same precision you get with the advanced version. Both advanced and basic software versions provide complete jitterdecomposition into its components – including deterministic, random, and total jitter – as well as AutoMeasure to provide quick insight.Jitter Application Software PackagesE2681A EZJIT Jitter analysis softwareIncludes the following key measurements:cycle-to-cycle jitter, n-cycle jitter, period jitter,time interval error, setup and hold time,measurement histograms, measurement trending, and jitter frequency spectrum.N5400A EZJIT Plus Jitter analysis softwareQuickly separate random and deterministic jitter components and estimate total jitter at low BER for standards compliance. Automatic clock recovery and pattern detection, an easy-to-use setup wizard and graphical display views integrated into the Infiniium oscilloscope software further simplify navigation and RJ/DJ analysis.Infiniium: “It’s like someone who sits down and actually uses a scope designed this one.”Steve Montgomery, Director of Engineering, Linx TechnologiesUp to 40 GSa/s sample rate on two channelssignificantly reduces the chances of aliasing,increases measurement accuracy, and delivers thefull real-time bandwidth of the oscilloscope on twochannels simultaneously.Four channels at 20GSa/s with 8GHz real-time bandwidth or full bandwidth equivalent time modes are also available.Get fast answers to your questions with the built-in information system. Infiniium’s task-oriented Setup Guide provides step-by-step instructions for several advanced measurements and procedures.See your signal more clearly with a large (8.4-inch) high-resolution color display. Infiniium’s bright TFT display with anti-glare coating lets you see the details of your signal from all angles.20 Gb hard drive, 3.5” 1.44 MB floppy drive and rear USB port make it easy to save setup files, data files, screen shots, etc.Identify anomalies easily with color-graded persistence, a colorful visual representation of waveform distribution.Label waveforms and add notes to your screen captures — Infiniium’s keyboard makes it easy.Drag and drop markers with your mouse or use the arrow keys.Easy access to advanced features like math functions and FFTs, is provided by the Windows-based graphical user interface. This GUI also gives you unique capabilities like drag-and-drop measurements and zooming, and offers a graphical equivalent to all front panel controls.Remote access with Web-enabled connectivity,e-mail on trigger, and GPIB over LAN allows you to access your scope from remote locations.64 Mpts acquisition memory at 4GSa/s sample rate on two channels allows you to capture long time windows at high resolution – such as identifying glitches due to a power supply start-up from reset.QuickMeas+ key gives you any five automated measurements with a push of a button. You can also configure this key to print/save screen shots, save waveforms, or load a favorite setup.8Zoom and search with instant response.Zoom into your signal using the horizontal scale knob and search through your waveform with the position knob. MegaZoom technology allows you to find your area of interest quickly and easily – even with 64 Mpts waveforms.Built-in CD-R drive on rear panel allows you to update the system software conveniently and can be used to install third-party application packages.9/find/infiniimaxIIHands-free operation with the Infiniium VoiceControl option. Just speak into the microphone to operate front-panel controls.Segmented memory acquisition mode captures bursting signals at maximum sample rate without consuming memory during periods of inactivity.Removable hard disk drive option is available for added data security.Install third-party software packages such as Excel, LabView, Agilent Vee, MATLAB®, anti-virus software, and more to perform customizedprocessing and automation of your oscilloscope or to make the scope compliant to the network environment of your company.An external monitor allows you to run third-party applications on a large, high-resolution display while using the scope’s built-in monitor for high-speed waveform display.Windows® XP Pro operating system.A familiar interface makes simple tasks simple.Infiniium’s analog-like front panel has a full set of controls color coded to the waveforms and measurements, making simple tasks simple.One-year standard warranty and a variety of Agilent support options protect your investment for the long term.10MHz reference clock can be input (optional) to or output (standard) from the scope to allow precise timebase synchronization with RF instruments or logic analyzers.A new 18 GHz, BNC-compatible connectorprovides a high signal fidelity connection to Agilent active probes, SMA adapters, and standard BNCs.AutoProbe interface completely configures your scope for use with the InfiniiMax probing system and previous generation Agilent active probes.10/100 Mbps LAN interface lets you easily print waveforms on networked printers, save your results on your office PC, share information with others,and control the scope over the Web.10Two new high-bandwidth InfiniiMax IISeries probe amplifiers have been added to the InfiniiMax product line. InfiniiMax I probe amplifiers and probe heads can also be used with DSO 80000 Series scopes for lower performance applications.InfiniiMax II: The World’s Best High-Speed Probing System Just Got Better12GHz Hi-BW solder-in differential probe head provides maximum bandwidth and minimizes capacitive loading to ≤210fF.Variable spacing from 0.2 to 3.3mm (8 to 130 mills).12GHz Hi-BW differential browser provides maximum bandwidth for hand-held or probe holder use. Variable spacing from 0.2 to 3.3mm (8 to 130 mills).InfiniiMax offers you the highest performance available for measuring differential andsingle-ended signals, with flexible connectivity solutions for today’s high-density ICs and circuit boards.InfiniiMax probes have fully characterized performance for all of their various probe heads.This includes:•Swept frequency response plot•Common mode rejection vs. frequency plot •Impedance vs. frequency plot •Time-domain probe loading plot •Time-domain probe tracking plotOne-year standard warranty on active probes and a variety of Agilent support options to choose from.Controlled impedance transmission lines in every probe head deliver full performance versus the performance limitations produced by traditional wire accessories.Probe interface software allows you to save the calibration information for up to 10 different probe heads per channel and will automatically retrieve calibration data for a probe amplifier as it is attached to the scope.High-input impedance active probes minimize loading, support differential measurements and DC offset, and can compensate for cable loss.Probe calibration software delivers the most accurate probe measurements, linear phaseresponse and allows various probe combinations to be deskewed to the same reference time.InfiniiMax II probe headsThe 54006A 7.5 GHz resistive divider probe is available as a low-cost probing alternative for casual inspection of signals.A flat frequency response over the entire probe bandwidth eliminates the distortion and frequency-dependent loading effects that are present in probes that have an in-band resonance.InfiniMax I probe headsProbe Performance Plots AvailableThe InfiniiMax II probe manuals contain an extensive set of performance plots (bandwidth, probe tracking, CMRR, step response, impedance) for various probe configurations. See the following web site for this information/manuals/scopes/01169-9700_man.pdfInfiniium 80000 Series Performance CharacteristicsInfiniiMax II Series Performance CharacteristicsOrdering InformationReturn to service center required U.S. List$10,000$17,000Ordering Information (continued)as power supplies, inverters, semiconductor measurements,500 MHz (with supplied 10073C passive probe)500 MHz (with 10073C passive probe and80000 Series oscilloscope)Take the frustration out of communications testing and prove your designs conform to industry standards with the E2625A Communications Mask Test Kit option. Infiniium’s familiar Windows interface makes it easy for you to access the masks you need and configure your tests.In addition, the E2625A Communication Mask Test Kit comes with a set of electrical communication adapters to ensure convenient, reliable and accurate connections to your device under test. Included are more than 20 industry standard ANSI T1.102 and ITU-T G.703 communication signal mask templates. Logic Analyzer/Oscilloscope Time-Correlation Fixture.E2699A N5391AThe Agilent Serial BERT generator N4901B (N4902B)option 200 provides high speed digital stimulus to yourdevice with PRBS or memory based pattern from150Mb/s up to 13.5Gb/s (7Gb/s). For mor information,see /find/pulse-generators.Product Web site Array For the most up-to-date andcomplete application and productinformation, please visit ourproduct Web site at:/find/infiniimaxII /find/infiniimaxIIAgilent Technologies’ Test and Measurement Support, Services, and AssistanceAgilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully.Every instrument and system we sell has a global warranty. Two concepts underlie Agilent's overall support policy: "Our Promise" and "Your Advantage."Our PromiseOur Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic performance specifications and practical recommendations from experienced test engineers. When you receive your new Agilent equipment, we can help verify that it works properly and help with initial product operation.Your AdvantageYour Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchase according to your unique technical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration, extra-cost upgrades, out-of-warranty repairs, and on-site education and training, as well as design, system integration, project management, and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity, optimize the return on investment of your Agilent instruments and systems, and obtain dependable measurement accuracy for the life of those products.For more information on Agilent Technologies’products, applications or services, please contact your local Agilent office. The complete list is available at:/find/contactus Phone or Fax United States:(tel) 800 829 4444(fax) 800 829 4433Canada:(tel) 877 894 4414(fax) 800 746 4866China:(tel) 800 810 0189(fax) 800 820 2816Europe:(tel) 31 20 547 2111Japan:(tel) (81) 426 56 7832(fax) (81) 426 56 7840Korea:(tel) (080) 769 0800(fax) (080) 769 0900Latin America:(tel) (305) 269 7500Taiwan:(tel) 0800 047 866(fax) 0800 286 331Other Asia Pacific Countries:(tel) (65) 6375 8100(fax) (65) 67556 0042Email:*****************Contacts revised: 05/05/05Product specifications and descriptions in this document subject to change without notice.© Agilent Technologies, Inc. 2005Printed in USA, May 12, 20055989-1487ENUS /find/emailupdates Get the latest information on the products and applications you select.Agilent T&M Software and ConnectivityAgilent's Test and Measurement software and connectivity products, solutions and developer network allows you to take time out of connecting your instruments to your computer with tools based on PC standards, so you can focus on your tasks, not on your connections. Visit /find/connectivityfor more /find/agilentdirectQuickly choose and use your test equipment solutions with confidence.Agilent Email UpdatesAgilent Direct。
敏察技术有限公司的MINITACTORTM电磁遥控器说明书
| P115MINITACTOR TMFeatures• UL508 Recognized and load break rated for 1000vdc systems• Hermetically sealed contactor: ensures make/break switching up to1200Vdc• Best option for: NEC 690.11 and 690.12 DC arc fault interrupting andrapid shutdown requirements• Small, lightweight and cost effective patented design• Perfect choice for 600Vdc and 1000Vdc photovoltaic/battery systemsSPECIFICATIONSSpecificationsContact ArrangementCOIL RATINGS @ 25°C 2POWER SWITCHING CURRENT CARRY RATINGSCURRENT CARRY vs TIME DC RESISTIVE CLOSING CYCLE ESTIMATESORDERING OPTIONSExample : P115BDADIMENSIONSCoil Terminals:Power Terminals:MountingM4 or 8-32 ScrewsTorque 1.3-1.7Nm [12-15in-lb]Case MaterialThermoplastic Polyester Resin Power Connection M4 StudsTorque 1.3-1.7Nm [12-15in-lb] max Coil Termination M3 StudsTorque 0.5Nm [5in-lb] maxAll dimensions are +/- 0.5mmPage 4CONTACT USSensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice.Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF.All products are sold subject to Sensata’s terms and conditions of sale supplied at SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, Americas+1 (805) 684-8401*******************WARNINGSRISK OF MATERIAL DAMAGE AND HOT ENCLOSURE• The product’s side panels may be hot, allow the product to cool before touching • Follow proper mounting instructions including torque values • Do not allow liquids or foreign objects to enter this productFailure to follow these instructions can result in serious injury, or equipment damage.HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH• Disconnect all power before installing or working with this equipment • Verify all connections and replace all covers before turning on powerFailure to follow these instructions will result in death or serious injury.• Electrical life rating is based on resistive load with 27μH maximum inductance in circuit. Because your application may be different, we suggest you test the contactor in your circuit to verify life is as required.• Contactor is bi-directional and therefore can carry, make, and break current in both directions.• Contactor is not sensitive to direction of installation and can be mounted in any position or axis.APPLICATION NOTESGENERAL NOTES1. Temperature range refers to ambient conditions. Terminal temperature can exceed listed values.2. Contactor is operated by a coil that changes resistance with temperature. Since pick-up current, coil current and coil power are specified at nom-inal voltage, they will be lower than indicated at temperatures above 25°C and higher than indicated at temperatures below 25°C. Similarly, pick-up and drop-out voltages will be higher than indicated at temperatures above 25°C and lower than indicated at temperatures below 25°C.。
iHome iBT59颜色变化蓝牙充电迷你扬声器说明书
Questions? Visit Model iBT59Color Changing BluetoothRechargeableMini SpeakerCHARGE BEFORE USEFCC InformationFCC Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.CAN ICES-3 (B)/NMB-3(B)Canada StatementThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.QDID: B020770IMPORTANTRead before proceedingIf you have any question regarding the operation or use of this product, please visit to view answers to frequently asked questions.To learn more about this and other iHome products, please visit us online at FCC ID: EMOIBT59IC: 986B-IBT59• Place the unit on a level surface away from sources of direct sunlight or excessive heat.• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents such as thinner or similar materials can damage the surface of the unit.iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service.If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping instructions. Disclaimer of WarrantyNOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product.© 2015 SDI Technologies, Inc. All rights reservedQuestions? Visit or call 1-800-288-2792 Toll FreeiBT59-150601-B (TA) Printed in China• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures & not handled appropriately• Do not place loose batteries in a pocket, purse, or other container containing metalobjects, do not mix with used or other battery types, or store with hazardous or combustible materials.• Store in cool, dry, ventilated area.• Follow applicable laws and regulations for transport and disposal.IMPORTANT SAFETY INSTRUCTIONSWhen used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.1. Water and Moisture – The unit should not be used near water. For example:near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.2. Ventilation – The unit should be situated so that its location or position doesnot interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.3. Heat – The unit should be situated away from heat sources such as radiators,heat registers, stoves or other appliances (including amplifiers) that produce heat.4. Power Sources – The unit should be connected to a power supply only ofthe type described in the operating instructions or as marked on the appliance.5. Power-Cable Protection – Power supply cables should be routed so thatthey are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.6. Cleaning – The unit should be cleaned only as recommended. See theMaintenance section of this manual for cleaning instructions.7. Objects and Liquid Entry – Care should be taken so that objects do notfall and liquids are not spilled into any openings or vents located on the product.8. Attachments – Do not use attachments not recommended by the productmanufacturer.9. Lightning and Power Surge Protection – Unplug the unit from the wallsocket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.10. Overloading – Do not overload wall sockets, extension cords, or integralconvenience receptacles as this can result in a risk of fire or electric shock.11. Damage Re quiring Se rvice – The unit should be serviced by qualifiedservice personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operatenormally.12. Periods of Nonuse – If the unit is to be left unused for an extended periodof time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.13. Servicing – The user should not attempt to service the unit beyond thosemethods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.Bluetooth ModeTo compress and lock speaker, gently press speaker down from the top and twist clockwise to lock in place.To unlock and expand the speaker, grip the top and bottom and give a small twist counter-clockwise. DO NOT pull hard once open, as the built in spring will automatically extend the speaker to its proper position.The iBT59 is powered by a rechargeable battery in the speaker. Make sure to charge speaker before use.• Connect the micro-USB plug to the USB Charging jack on the speaker.• Connect the larger USB plug to a powered USB port, such as that on a computer. Your computer should be connected to a wall outlet when speaker is charging. The light on the speaker will turn to solid red while charging and turn off when fully charged.When the light dims or if you start to notice sound distortion at higher volumes, it's time to recharge the batteries.• Slide the Off/On/ Bluetooth Pairing Switch on the speaker to theBluetooth pairing position ( ). The light will flash blue and red and a tone will sound to indicate pairing attempt.• Place your audio device in Bluetooth mode (often found in the device’s Settings or Tools menu) and make it “discoverable”. “iHome iBT59” should appear on your device. Select it to connect.• Once paired, the light will glow solid blue and a confirmation tone will sound. You can then stream audio to the speaker. If pairing is not successful, turn the power OFF ( ) on the speaker and repeat pairing procedure.• To listen to Bluetooth audio, make sure the Off/On/ Switch on the speaker is in the ON ( ) position.• Control Bluetooth audio from your device.Remember to turn off the speaker and your device after listening.• Slide the Off/On/Bluetooth Pairing Switch on the speaker to the ON ( ) position. The blue power light will flash, indicating auto-link mode.• Press the LED Lighting Effects Button to cycle through 4 lighting effects modes: Fast Color Cycle, Slow Color Cycle, One Color, and lighting effect Off.to playto pair, then play Speaker front viewSpeaker back viewSpeaker left viewSpeaker right viewUSB Charging JackOff/On/Bluetooth PairingSwitchCharging the iBT59CHARGE BEFORE USEUSB AC adaptor (not included)Computer connected to working outletComputer USB portCharging/Pairing LEDUSB AC adaptorconnected to working outletWhen speaker is ON ( ),press the LED Lighting Effects Button to cycle through 4 lighting effects modes: Fast Color Cycle, Slow Color Cycle, One Color, and None.LED Lighting Effects ButtonRubber PadNote: Clean rubber pad on bottom of speakerwith damp cloth for best performanceCharging cable。
MAXI-LITE 4-6光源灯具型号说明书
Lamp Control Mast Control
4-Light Kubota D1105
4-Light CAT C1.1ቤተ መጻሕፍቲ ባይዱ
4-Light CAT C1.5T
4-Light Isuzu 4LE2T
6-Light Kubota D1105
6-Light CAT C1.1
6-Light CAT C1.5T
13.8 hp (10.3 kWm) @
1,800 RPM
22.3 hp (16.6 kWm) @
1,800 RPM
40.2 hp (30.0kWm) @ 1,800 RPM
11.6 hp (8.7 kWm) @
1,800 RPM
1,800 RPM
1,800 RPM
1,800 to 1925 RPM
Ultra Low Sulfur Diesel (ULSD)
0.65 GPH
1.22 GPH
1.77 GPH
0.63 GPH
154.4 hr
81.7 hr
56.5 hr
159.4 hr
1.27 gal
1.75 gal
2.87 gal
1.35 gal
1000 hr
500 hr
250 hr
1000 hr
部分加速度计型号参数
部分加速度计型号参数部分加速度计型号参数加速度传感器MXP7205VF MXP7205VF引脚低成本±5 G带SPI接口的双轴加速度计MXR6500G MXR6500G引脚薄型，低功耗±1.7克双轴加速度计，按比例输出KXTE9-1026 KXTE9-1026引脚±2g的三轴数字加速度计产品规格LSM320HAY30 LSM320HAY30引脚MEMS运动传感器模块的三维数字加速度计和2D间距和偏航模拟陀螺仪SCA830-D06 SCA830-D06引脚SCA830-D06单轴数字SPI接口的高性能加速度计，KXSS5-2057 KXSS5-2057引脚为±3克三轴加速度计产品规格ADIS16006 ADIS16006引脚双轴±5 g加速度计具有SPI接口的2240-002 2240-002引脚的模拟加速计模块KXP74 KXP74引脚 Kxp74系列加速度计和倾角传感器SCA3000-E01 SCA3000-E01 超低功耗引脚 SCA3000-E01 3轴加速度计，数字SPI接口KXTF9-4100 KXTF9-4100引脚±2g的三轴数字加速度计产品规格2430-002 2430-002引脚三轴模拟加速计模块KXPA4-2050 KXPA4-2050引脚±2 G三轴模拟加速度计产品规格SCA2100-D01 SCA2100-D01 SCA2100-D01 2轴加速度计，数字SPI接口引脚MXA2050A MXA2050A引脚低成本，±10 G双模拟输出三轴加速度计SCA3000-E05 SCA3000-E05 超低功耗引脚 SCA3000-E05 3轴加速度计，数字SPI接口MXR7150V MXR7150V引脚低成本？7 G按比例输出的双轴加速度计，MXR2010A MXR2010A引脚低成本，±35克双轴加速度计，按比例输出KXSC7-1050 KXSC7-1050引脚±2g的三轴模拟加速度计产品规格SCA3100-D03 SCA3100-D03 SCA3100-D03的3轴加速度计，数字SPI接口引脚MXA6500G MXA6500G引脚低成本，低噪音1 G双轴加速度计，绝对模拟输出SCA3060-D01 SCA3060-D01引脚 Sca3060-D01数位式低功率加速度计非安全关键汽车应用? 2012-002 2012-002引脚的模拟加速计模块MXD6125G MXD6125G引脚薄型，低功耗，±2 G双数字输出三轴加速度计MXR9500G MXR9500G引脚低成本±1.5 G三成比例的输出三轴加速度计KXTE9-2050 KXTE9-2050引脚±2g的三轴数字加速度计产品规格KXSS5-4457 KXSS5-4457引脚为±3克三轴加速度计产品规格2264-005 2264-005引脚的模拟加速计模块KXP84 KXP84引脚 Kxp84系列加速度计和倾角传感器SCA3100-D04 SCA3100-D04 SCA3100-D04 引脚高性能3轴加速度计，数字SPI接口SCA820-D04 SCA820-D04引脚 Sca820-D04 1轴高性能加速度计，数字SPI接口2460-002 2460-002引脚三轴模拟加速计模块格SCA820-D03 SCA820-D03引脚 Sca820-D03单轴加速度计，数字SPI接口BU-21771-000 BU-21771-000引脚BU系列加速BU-21771-000ADXL202E ADXL202E引脚低成本？2 G，占空比输出的双轴加速度计MXD2020E MXD2020E引脚超低噪声，低失调漂移±1 G双数字输出三轴加速度计KXR94-1050 KXR94-1050引脚±2g的三轴加速度计产品规格SCA3100-D07 SCA3100-D07 SCA3100-D07 引脚高性能3轴加速度计，数字SPI接口MX205Q MX205Q引脚低成本，5.0G，双模拟输出三轴加速度计ADXL202 ADXL202引脚低成本？2 G双轴加速度计，占空比输出MXR7250VW MXR7250VW引脚低成本±5 G双轴加速度计，按比例输出MXR6400Q MXR6400Q引脚超高性能为±1g双轴加速度计，按比例输出KXSD9-2050 KXSD9-2050引脚±2g的三轴数字加速度计产品规格SCA2100-D02 SCA2100-D02 SCA2100-D02 引脚 2轴高性能加速度计，数字SPI接口ADIS16003 ADIS16003引脚双轴±1.7 g加速度计具有SPI接口的2220-002 2220-002引脚的模拟加速计模块KXD94-2802 KXD94-2802引脚±10克三轴加速度计产品规格SCA3000-D02 SCA3000-D02引脚SCA3000-D02低功耗3轴加速度计，数字I 2 C接口KXTF9-1026 KXTF9-1026引脚±2g的三轴数字加速度计产品规格2422-002 2422-002引脚三轴模拟加速计模块KXPA4-1050 KXPA4-1050引脚±2 G三轴模拟加速度计产品规格SCA2110-D03 SCA2110-D03引脚 Sca2110-D03 2轴加速度计，数字SPI接口ADXL105 ADXL105引脚的高精度61克到65克单轴iMEMS加速度计与模拟输入KXPS5-2050 KXPS5-2050引脚±2g的三轴加速度计产品规格AIS326DQ的AIS326DQ引脚MEMS惯性传感器的3轴，带有数字输出的低g加速度计SCA3000-E04 SCA3000-E04 超低功耗引脚 SCA3000-E04 3轴加速度计，数字SPI接口? BU-23173-000 BU-23173-000引脚 BU系列加速BU-23173-000ADXL210E ADXL210E引脚低成本？10 G双轴加速度计，占空比MXD6125Q MXD6125Q引脚超高的性能为±1g双轴加速度计的数字输出KXR94-2353 KXR94-2353引脚±2g的三轴数字加速度计产品规格MXA2500J MXA2500J引脚超低成本，1.0 G绝对值输出的双轴加速度计，SCC1300-D04 SCC1300-D04引脚 Scc1300-D04组合的陀螺仪和3轴加速度计，数字SPI接口? 2010-002 2010-002引脚数字加速计模块MXP7205VW MXP7205VW引脚低成本±5 G带SPI接口的双轴加速度计MXR9150G MXR9150G引脚低成本±5克三成比例的输出三轴加速度计KXTE9-1050 KXTE9-1050引脚±2g的三轴数字加速度计产品规格KXSS5-3028 KXSS5-3028引脚为±3克三轴加速度计产品规格2260-002 2260-002引脚的模拟加速计模块KXP74-1050 KXP74-1050引脚±2g的三轴数字加速度计产品规格SCA3000-E02 SCA3000-E02引脚 SCA3000-E02的3轴加速度计，数字I 2 C接口超低功耗? 2440-002 2440-002引脚三轴模拟加速计模块KXPB5-2050 KXPB5-2050引脚±2 G三轴加速度计产品规格SCA830-D05 SCA830-D05引脚SCA830-D05单轴加速度计，数字SPI接口ADXL190 ADXL190引脚低成本6100 G单轴加速度计的模拟输出MXC62020GP MXC62020GP引脚低功耗，薄型±2 G双I 2 C接口的三轴加速度计KXPS5-4457 KXPS5-4457引脚±3G的三轴加速度计产品规格CMA3000-D01 CMA3000-D01引脚 CMA3000-D01的3轴超低功耗加速度计，数字SPI和I 2 C接口MXR7305VF MXR7305VF引脚改进的低成本±5 G双成比例的模拟输出三轴加速度计MXR6150M MXR6150M引脚薄型，低功耗±5g的双轴加速度计，按比例输出KXSD9-1026 KXSD9-1026引脚±2g的三轴数字加速度计产品规格SCA2120-D07 SCA2120-D07引脚 Sca2120-D07 2轴加速度计，数字SPI接口MXD202 MXD202引脚低成本，2.0G，双数字输出三轴加速度计SCA3060-D02 SCA3060-D02引脚 Sca3060-D02数位式低功率加速度计非安全关键汽车应用? 2210-002 2210-002引脚的模拟加速计模块KXD94 KXD94引脚 KXD94系列加速计和倾斜计SCA3000-D01 SCA3000-D01引脚SCA3000-D01低功耗3轴加速度计，数字SPI接口KXTE9-4100 KXTE9-4100引脚±2g的三轴数字加速度计产品规格ML8953 ML8953 的3轴加速度计的数字量输出引脚数据KXR94-2283 KXR94-2283引脚，多项数据表为±2G三轴的加速度计产品规格2420-002 2420-002引脚三轴数字加速计模块KXP94 KXP94引脚 Kxp94系列加速度计和倾角传感器SCA2120-D05 SCA2120-D05引脚 Sca2120-D05 2轴加速度计，数字SPI接口ADXL05 ADXL05引脚 61 G 65 G的单芯片加速度计与信号调理2470-002 2470-002引脚三轴模拟加速计模块KXPS5-1050 KXPS5-1050引脚±2g的三轴加速度计产品规格AIS226DS AIS226DS引脚 MEMS惯性传感器的2轴，低g加速度计的数字量输出SCA810-D01 SCA810-D01引脚 Sca810-D01单轴加速度计，数字SPI接口BU-23842-000 BU-23842-000引脚BU系列加速BU-23842-000MMA7455 MMA7455 MMA7455引脚 3轴加速度计模块ADXL50 ADXL50引脚单片加速度传感器与信号调理MXD6025Q MXD6025Q引脚超低噪声，低失调漂移±1 G双数字输出三轴加速度计KXR94-2050 KXR94-2050引脚±2g的三轴加速度计产品规格MPXY8300 MPXY8300引脚根部分号码汽车压力范围卡车轮胎压力范围压力范围压力传感器精度* Z-轴加速度计测量范围Z-轴加速度计精度X轴加速度计测量范围X轴加速度计精度AcceleMXA2500G MXA2500G引脚改进，超低噪声1.7克双轴加速度计具有绝对的输出SCC1300-D02 SCC1300-D02引脚 Scc1300-D02组合的陀螺仪和3轴加速度计，数字SPI接口? ADXL210 ADXL210引脚低成本？10 G双轴加速度计，占空比1221L-002 1221L-002引脚的低噪声模拟加速度计引脚 1.5克MMA7368L MMA7368L三轴低g微机械加速度计LIS2L06AL LIS2L06AL引脚MEMS惯性传感器的2轴- + / - 2g/6g超小型线性加速度计ADXL327 ADXL327引脚小尺寸，低功耗，3轴±2 g加速度计MMA7330L MMA7330L引脚4克，12克三轴低g微机械加速度计MMA7341LC MMA7341LC引脚 3G，11克三轴低g微机械加速度计4203 4203引脚型号4203加速度计MMA2300 MMA2300引脚表面贴装微机械加速度计MLX90308 MLX90308引脚可编程的通用传感器接口MMA1220KEG MMA1220KEG引脚低g微机械加速度计LIS3L02AS5 LIS3L02AS5引脚 MEMS惯性传感器3轴- ？2g/6g 线性加速度计MMA3201D MMA3201D引脚表面贴装微机械加速度计MMA6261Q MMA6261Q的引脚 Mma6261q加速度传感器MMA8452Q MMA8452Q，，引脚 3轴，12-bit/8-bit，，数字加速度计3031-050 3031-050引脚型号3031加速度计4610-020-060 4610-020-060引脚型号4610加速度计MMAS40G10D MMAS40G10D引脚微机械加速度计SCA610-CAHH1G SCA610-CAHH1G引脚SCA610-cahh1g 1轴模拟测斜仪MAX1459 MAX1459引脚 MAX1459 2线，4-20mA的智能信号调理KXRB5-2050 KXRB5-2050引脚，多项数据表为±2G三轴的加速度计ADXL335 ADXL335引脚小尺寸，低功耗，3轴±3 g加速度计MMA1270KEG MMA1270KEG引脚飞思卡尔半导体技术资料MMA2204KEG MMA2204KEG引脚表面贴装微机械加速度计LIS2L01 LIS2L01引脚，多项数据表的惯性传感器2axis/1g线性加速度计MMA2204D MMA2204D引脚表面贴装微机械加速度计HMR3400 HMR3400引脚数字罗盘解决方案QA-1400 QA-1400引脚加速度计具有成本效益级惯性传感器ADXL213 ADXL213引脚低成本±1.2克双轴加速度计4655-020 4655-020引脚型号4655加速度计4801A 0010 4801A-0010引脚型号4801a加速度计MMA1212 MMA1212引脚表面贴装微机械加速度计BMA145 BMA145引脚 Bma145数据表B Bma145三轴模拟加速度传感器LIS344AL的LIS344AL引脚MEMS惯性传感器的3轴超小型线性加速度计ADXL150 ADXL150引脚 65克到650克，低噪声，低功耗，单/双通道轴的iMEMS？加速度计MMA2260D和 MMA2260D引脚 1.5克X-轴微机械加速度计MMA2301KEG MMA2301KEG引脚表面贴装微机械加速度计LIS352AX的 LIS352AX引脚 MEMS惯性传感器的3轴- ±2g的绝对模拟输出加速度计1203-1000-10-072X 1203-1000-10-072X引脚型号1203加速度计MMA1212D MMA1212D引脚表面贴装微机械加速度计MLX90308CAB MLX90308CAB引脚可编程传感器接口52M30-2000-360 52M30-2000-360引脚型号52m30加速度计ADXL323 ADXL323引脚小尺寸，低功耗，2轴±3 GI MEMS加速度计MLX90308CCC MLX90308CCC引脚可编程传感器接口MMA7341L MMA7341L引脚 3G，11克三轴低g微机械加速度计LIS2L02AQ LIS2L02AQ引脚惯性传感器2axis - 2g/6g线性加速度计ADXL345 ADXL345引脚三轴±2/4/8/16g数字加速度计MMA2244EG MMA2244EG引脚低g微机械加速度计MMA6341L MMA6341L引脚 3G，11克两轴低g微机械加速度计LIS302SG LIS302SG引脚 MEMS运动传感器的3轴- ？2G模拟输出短笛加速度计4000A-020-060 4000A-020-060引脚型号4000A加速度计MMA1201P MMA1201P引脚微机械加速度计ADXL193 ADXL193引脚单轴，高g，公司的iMEMS加速度计MMA7660FC MMA7660FC引脚 3轴方向/运动检测传感器LIS3L02AQ3 LIS3L02AQ3引脚 MEMS惯性传感器的3轴- 2G /6克线性加速度计ADW22035 ADW22035引脚精度±18 G Single-/dual-axis iMEMS加速度计MMA7360L MMA7360L引脚 1.5G，6克三轴低g微机械加速度计MAX1166 MAX1166引脚低功耗，16位模拟数字转换器，并行接口MMA6851QR2 MMA6851QR2引脚单轴SPI惯性传感器NJU7029 NJU7029引脚低噪声，轨至轨输出双通道CMOS运算放大器4602-010-060 4602-010-060引脚型号4602加速度计MMA6270Q MMA6270Q引脚 R1.5 G - 6 G双三轴低g微机械加速度计SCA610-C23H1A SCA610-C23H1A引脚的 SCA610-c23h1a单轴模拟加速度计ADIS16355， ADIS16355引脚三轴惯性传感器ADXL312 ADXL312引脚三轴，±1.5g/3g/6g/12g数字加速度计MMA2202KEG MMA2202KEG引脚表面贴装微机械加速度计LIS3L02AQ LIS3L02AQ引脚惯性传感器3轴- 2g/6g线性加速度计MMA2202D MMA2202D引脚表面贴装微机械加速度计BU1511KV2 BU1511KV2引脚事件数据记录系统LSIQA3000-030 QA3000-030引脚的 Q-Flex QA-3000加速度计ADS8201 ADS8201引脚 2.2V至5.5V，低功耗，12位，100ksps时，与PGA和SPI?接口的8通道数据采集系统3058-010-P 3058-010-P引脚型号3058加速度计4623-025-060 4623-025-060引脚型号4623加速度计XMMA1000P XMMA1000P引脚微机械加速度计LIS244AL LIS244AL引脚 MEMS运动传感器的2轴- ？2克超小型线性加速度计KXPS5 KXPS5引脚加速度计和倾角传感器ADIS16354 ADIS16354引脚高精度三轴惯性传感器MMA7261QT和 MMA7261QT引脚 2.5G - 10G三轴低g微机械加速度计MMA6222AKEG MMA6222AKEG引脚模拟双轴微机械加速度计“惯性传感器LIS3L02AS LIS3L02AS引脚 3轴- 2g/6g线性加速度计MMA1210D MMA1210D引脚表面贴装微机械加速度计HMC1055 HMC1055引脚 3轴罗盘传感器集QA-700 QA-700引脚加速度计的经济温度补偿传感器ADXL320 ADXL320引脚小而薄的±5 G iMEMS加速度计834M1-2000， 834M1-2000引脚型号834m1加速度计MMA2260 MMA2260引脚 1.5克X-轴微机械加速度计LIS332AR LIS332AR引脚 MEMS运动传感器的3轴±2 G模拟输出超小型加速度计LIS3LV02DL LIS3LV02DL引脚 MEMS惯性传感器的3轴-2G /？？6克数字输出低电压，线性加速度计MMA1270D MMA1270D引脚低g微机械加速度计MMA2244KEG MMA2244KEG引脚低g微机械加速度计LIS33DE LIS33DE引脚 MEMS运动传感器的3轴- ±2克/±8G智能数字输出“纳米”加速度1207F-1000 1207F-1000引脚型号1207f加速度计MMA1200D MMA1200D引脚表面贴装微机械加速度计邢树村整理：TEL:189********。
NUC微控制器产品系列说明书
M251 Feature
。 Arm® Cortex®-M23 。 运行速度可达 48 MHz
M252 Feature
。 USB 2.0 全速设备无需外 挂晶振
M253 Feature
。 USB 2.0 全速设备无需外 挂晶振
。 高达五路 UART 。 CAN FD x1
2
Low Power
TrustZone
AEC-Q100
Market Trend
随着电子应用对低功耗或电池供电的需 求日益增加，现今的应用必须尽量降低 能源消耗，甚至在极端情况下，可能需 要倚赖单颗电池来维持长达 15 至 20 年 运转
低功耗应用情景包含手持式设备、居家、 AIoT、IIoT (工业物联网) 等应用情景， 使用范围十分广泛
(Programmable Serial I/O) • USB 2.0 全速装置无需外挂晶振 • 独立的 RTC 电源 VBAT 管脚
Highlight
• 支持 1.8 V ~ 5.5 V 串行接口，可连接不同电压 装置
*USCI: Universal Serial Control Interface Controller
C
1.8 3.3 5 M253
CU
3.3 5 M071
1.8 3.3 5 M252
U
3.3 5 M051
1.8 3.3 5 M251
3.3 5 Mini51
3.3 5 3.3 5
1.8 3.3 Nano100
M480 M460 M471 M453 M452 M451
E CU E CU
U C
U
Arm9™
CrustCrawler DYNAMIXEL MX-64R 智能机械臂电机说明书
DYNAMIXEL MX-64R**Cautions- MX-64R supports RS-485 communication.- Recommended voltage of MX-64 is different with that of former RX-64.(Operating Voltage : 10~14.8V (Recommended Voltage 12V)** DESCRIPTION•DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module.•MX series is a new concept of DYNAMIXEL with advanced functions like precise control, PID control, 360 degree of position control and high speed communication.** CHARACTERISTIC•Advanced durability, degree of precision, and wider control zone were achieved thanks to newly applied CONTACTLESS ABSOLUTE ENCODER•360¡Æ POSITION CONTROL without dead zone•4,096 PRECISE RESOLUTION by 0.088¡Æ•SPEED CONTROL at ENDLESS TURN MODE•Reliability and accuracy were advanced in the position control through PID CONTROL•High baud rate up to 3Mbps•RS-485 LEVEL COMMUNICATION•Torque control via current sensing**The assembly structure of the MX-64 and RX-64 are the same but there some modifications to the case.**** INCLUDESDescription Qty DYNAMIXEL MX-64R 1 HORN HN05-N101 (MX Exclusive) 1 WASHER Thrust Washer 1CABLE 4P Cable 200mm 1Wrench Bolt M2.5*4 16pcs BOLT/NUTWrench Bolt M3*8 1pcsNut M2.5 18pcs** H/W SPECSProduct Name MX-64RWeight 126gDimension 40.2mm x 61.1mm x 41mmGear Ratio 200 : 1Operation Voltage (V) 10 12 14.8 Stall Torque (N.m) 5.567.3 Stall Current (A) 3.9 4.1 5.2 No Load Speed (RPM)586378 Motor Maxon MotorMinimum ControlAngleAbout 0.088¡Æ x 4,096Operating Range Actuator Mode : 360¡Æ Wheel Mode : Endless turnOperating Voltage10~14.8V (Recommended voltage : 12V) Operating Temperature -5¡ÆC ~ 80¡ÆCCommand Signal Digital PacketProtocol Half duplex Asynchronous Serial Communication (8bit,1stop, No Parity)Link (physical)RS-485 Multi Drop Bus (daisy chain type connector)ID 254 ID (0~253) Baud Rate8000bps ~ 3MbpsFeedback Functions Position, Temperature, Load, Input Voltage, Current, etc.Material Case : Engineering Plastic Gear : Full MetalPosition Sensor Contactless absolute encoderDefault ID #1 – 57600bps** After purchase, please change ID and baud rate according to your use.** COMPATIBLE PRODUCTS- Controller : CM-2+, CM-700- Interface(I/F) : USB2Dynamixel (RS-485)- NOTICE : Not compatible with the RX-64 horn. (HN05-N101 Set / T101 Set)** CONTROLLING ENVIRONMENT- Software for Dynamixel control : ROBOPLUS - Download- C/C++, C#, Labview, MATLAB, Visual Basic et. : Library – Download**Click here to download 2D and 3D drawings**Click here to go to e-Manual.。
MR62系列微型信号转换器说明书
Document No. ER0515EJ1V0DS00 (1st edition) Date Published February 2001 N CP(K) Printed in JapanDATA SHEET2001©Ph (707) 996-5201 Fx (707) 996-3380Data Sheet ER0515EJ1V0DS2PIN CONFIGURATIONS (BOTTOM VIEW)(not energized)Note The coil has no polarity.PAD LAYOUT Unit: mm (inch)NoteGeneral tolerance ±0.2 (0.008) mmOUTLINE DRAWINGS AND DIMENSIONS Unit: mm (inch)Note The tolerance is ±0.2 (0.008) unless otherwise specified.The dimension in the box shows basic size.MAKING (SIDE VIEW)General type<1><2><3><4><5>Part number Manufacturer Country of origin Date codeUL, CSA markingUL recognized, CSA certified typePh (707) 996-5201 Fx (707) e-mail:***************************Data Sheet ER0515EJ1V0DS3SPECIFICATIONSTypesMR62-**MR62-**K**MR62-****YMR62-**K*YContact Form 2 Form cContact Material Silver alloy with gold alloy overlay Contact RatingsMaximum Switching Power 60 W, 125 A Maximum Switching Voltage 220 Vdc, 250 Vac Maximum Switching Current 2 A Maximum Carrying Current2 AMinimum Contact Ratings 100 mVdc, 100 µA Initial Contact Resistance 50 m Ωtyp. (Intial)Nominal Operating Power Approx. 550 mW Approx. 400 mW Operate Time (Excluding bounce)Approx. 2.5msApprox. 3.5msApprox. 2.5 msRelease Time (Excluding bounce without diode)Approx. 2 ms Insulation Resistance 1000 M Ω at 500 VdcWithstand VoltageBetween open contacts500 Vac *11000 Vac *11500 V surge *2500 Vac *11000 Vac *11500 V surge *2Between adjacent contacts Between coil to contacts1000 Vac *11500 V surge *2Shock Resistance294 m/s 2 (misoperating)980 m/s 2 (destructive failure)Vibration Resistance10 to 55 Hz, double amplitude 1.5 mm (misoperating)10 to 55 Hz, double amplitude 5 mm (destructive failure)Ambient Temperature −40 to +85°C (−40 to +70°C at 48 V coil)Coil Temperature Rise40°C(550 mW)40°C(550 mW)35°C (400 mW)Running Specifications Nonload 10 × 106 operationsLoad50 Vdc, 0.1 A (resistive) 1 × 106 operations at 85°C, 5 Hz 10 Vdc, 10 mA (resistive) 1 × 106 operations at 85°C, 2 HzWeight Approx. 5 g*1 for one minute*2 rise time: 10 µs, decay time to half crest: 160 µs.PART NUMBER SYSTEMMR62-5UKSRY: 550 mW : 400 mW: Silver-palladium alloy with gold alloyoverlay: Silver-nickel alloy with gold alloyoverlay Sealed type (Washable)Nominal coil voltage (See part numbers)Nominal operate power Nil Y Contact materialNil R : 500 Vac : 1000 VacBreakdown voltage between open contacts Nil K : Standard type: UL recognized CSA certified type Safety standard Nil U SAFETY STANDARD AND RATING*Spacing: UL114, UL478UL Recognized (UL508)*File No E73266CSA Certificated (CSA C22.2 No14)File No LA4626630 Vdc, 2 A (Resistive)110 Vdc, 0.6 A (Resistive)125 Vac, 1 A (Resistive)Ph (707) 996-5201 Fx (707) e-mail:***************************Data Sheet ER0515EJ1V0DS4PRODUCT LINEUPRemarks:1. Drive under nominal coil voltage. If it is impossible, please inquire of NEC.2. Must Operate Voltage and Must Release Voltage are tested by pulse voltage.3. MAXIMUM COIL VOLTAGE is maximum value of permissible alteration.At continuous use of the voltage, please Inquiry for NEC.Standard type(at 20°C)Part Number Nominal Voltage(Vdc)Coil Resistance (Ω)±10%Must Operate Voltage(Vdc)Must Release Voltage(Vdc)MR62-5SR 542 3.10.25MR62-6SR 666 3.90.33MR62-9SR 9140 5.70.45MR62-12SR 122808.10.68MR62-24SR 24105015.8 1.3MR62-48SR48420034.42.6High-breakdown voltage type(at 20°C)Part Number Nominal Voltage(Vdc)Coil Resistance (Ω)±10%Must Operate Voltage(Vdc)Must Release Voltage(Vdc)MR62-5KSR 542 3.50.25MR62-6KSR 666 4.20.33MR62-9KSR 9140 6.30.45MR62-12KSR 122808.40.68MR62-24KSR 24105016.8 1.3MR62-48KSR48420038.42.6Low power consumption type(at 20°C)Part Number Nominal Voltage(Vdc)Coil Resistance (Ω)±10%Must Operate Voltage(Vdc)Must Release Voltage(Vdc)MR62-5SRY 562.5 3.50.25MR62-6SRY 690 4.20.33MR62-9SRY 9202.5 6.30.45MR62-12SRY 123608.40.68MR62-24SRY 24144016.8 1.3MR62-48SRY48576034.42.6Ph (707) 996-5201 Fx (707) e-mail:***************************Data Sheet ER0515EJ1V0DS5High-breakdown voltage, low power consumption type(at 20°C)Part Number Nominal Voltage(Vdc)Coil Resistance (Ω)±10%Must Operate Voltage(Vdc)Must Release Voltage(Vdc)MR62-5KSRY 562.5 3.50.25MR62-6KSRY 690 4.20.33MR62-9KSRY 9202.5 6.30.45MR62-12KSRY 123608.40.68MR62-24KSRY 24144016.8 1.3MR62-48KSRY48536038.42.6Standard type (UL recognized, CSA certified)(at 20°C)Part Number Nominal Voltage(Vdc)Coil Resistance (Ω)±10%Must Operate Voltage(Vdc)Must Release Voltage(Vdc)MR62-5USR 542 3.10.25MR62-6USR 666 3.90.33MR62-9USR 9140 5.70.45MR62-12USR 122808.10.68MR62-24USR 24105015.8 1.3MR62-48USR48420034.42.6High-breakdown voltage type (UL recognized, CSA certified)(at 20°C)Part Number Nominal Voltage(Vdc)Coil Resistance (Ω)±10%Must Operate Voltage(Vdc)Must Release Voltage(Vdc)MR62-5UKSR 542 3.50.25MR62-6UKSR 666 4.20.33MR62-9UKSR 9140 6.30.45MR62-12UKSR 122808.40.68MR62-24UKSR 24105016.8 1.3MR62-48UKSR48420038.42.6Ph (707) 996-5201 Fx (707) e-mail:***************************Data Sheet ER0515EJ1V0DS6Low power consumption type (UL recognized, CSA certified)(at 20°C)Part Number Nominal Voltage(Vdc)Coil Resistance (Ω)±10%Must Operate Voltage(Vdc)Must Release Voltage(Vdc)MR62-5USRY 562.5 3.50.25MR62-6USRY 690 4.20.33MR62-9USRY 9202.5 6.30.45MR62-12USRY 123608.40.68MR62-24USRY 24144016.8 1.3MR62-48USRY48576034.42.6High-breakdown voltage, low power consumption type (UL recognized, CSA certified)(at 20°C)Part Number Nominal Voltage(Vdc)Coil Resistance (Ω)±10%Must Operate Voltage(Vdc)Must Release Voltage(Vdc)MR62-5KSRY 562.5 3.50.25MR62-6KSRY 690 4.20.33MR62-9KSRY 9202.5 6.30.45MR62-12KSRY 123608.40.68MR62-24KSRY 24144016.8 1.3MR62-48KSRY48536038.42.6Ph (707) 996-5201 Fx (707) e-mail:***************************Data Sheet ER0515EJ1V0DS7543210Contact voltage (V)SWITCHING CAPACITYC o n t ac t c u r r en t (A )Applied power (W)with diodewithout diodeAPPLIED VOLTAGE vs. TIMINGO p e r a t e t i m e (m s )Sample: MR62-5SR 20 pieces Driving: 5 V dc, 50 Hz, 50% dutyArmbient temperature: Room temperatureO p e r a t e v o l t a g e (V )R e l e a s e v o l t a g e (V )10Applied power (W)R e l e a s e t i m e (m s )1005001000Applied power (mW)COIL TEMPERATURE RISEC o i l t e m p e r a t u r e r i s e (d e g r e e )806040200501234Operations (×104)O p e r a t e v o l t a g e (V )R e l e a s e v o l t a g e (V )12345Operations (×104)8642RUNNING TEST (Nonload)Ph (707) 996-5201 Fx (707) e-mail:***************************Data Sheet ER0515EJ1V0DS8ALTERNATION OF VOLTAGE AT DENSELY MOUNTING (Magnet interference)–10Mounting layoutAlternation of operate voltageA r a t i o o f a l t e r n a t i o n (%)Mounting layoutAlternation of release voltageAr a t i o o f a l t e r n a t i o n(%)+30+20+100–20–30–40+40––––NoteThe installation method and the installation pitch of the relay in this examination are as follows.ON ON ONOFFON ONOFFOFFIIIIVOFF OFF OFFPACKAGEThe relay is stuffed the tube as follows, packed, and shipped.Dimension of Relay Tube (Unit: mm)25 pieces/tubeMaterial: Polyvinyl chloride (anti-static treated)Outline of PackagePh (707) 996-5201 Fx (707) e-mail:***************************Data Sheet ER0515EJ1V0DS9Notes on Correct Use1. Notes on contact loadMake sure that the contact load is within the specified range; otherwise, the lifetime of the contacts will be shortened considerably. Note that the running performance shown is an example, and that it varies depending on parameters such as the type of load, switching frequency, driver circuit, and ambient temperature under the actual operating conditions. Evaluate the performance by using the actual circuit before using the relay.2. Driving relays- If the internal connection diagram of a relay shows + and – symbols on the coil, apply the rated voltage to the relay in the specified direction. If a rippled DC current source is used, abnormalities such as beat at the coil may occur.- The maximum voltage that can be applied to the coil of the relay varies depending on the ambient temperature. Generally, the higher the voltage applied to the coil, the shorter the operating time. Note, however, that a high voltage also increases the bounce of the contacts and the contact opening and closing frequency, which may shorten the lifetime of the contacts.- If the driving voltage waveform of the relay coil rises and falls gradually, the inherent performance of the relay may not be fully realized. Make sure that the voltage waveform instantaneously rises and falls as a pulse.- For a latching relay, apply a voltage to the coil according to the polarity specified in the internal connection diagram of the relay.- If a current is applied to the coil over a long period of time, the coil temperature rises, promoting generation of organic gas inside the relay, which may result in faulty contacts. In this case, use of a latching relay is recommended.- The operating time and release time indicate the time required for each contact to close after the voltage has been applied to or removed from the coil. However, because the relay has a mechanical structure, a bounce state exists at the end of the operating and release times. Furthermore, because additional time is required until the contact stabilizes after being in a high-resistance state, care must be taken when using the relay at high speeds.3. Operating environment- Make sure that the relay mounted in the application set is used within the specified temperature range. Use of a relay at a temperature outside this range may adversely affect insulation or contact performance.- If the relay is used for a long period of time in highly humid (RH 85% or higher) environment, moisture may be absorbed into the relay. This moisture may react with the NOx and SOx generated by glow discharges that occur when the contacts are opened or closed, producing nitric or sulfuric acid. If this happens, the acid produced may corrode the metallic parts of the relay, causing operational malfunction.- Because the operating temperature range varies depending on the humidity, use the relay in the temperature range illustrated in the figure below. Prevent the relay from being frozen and avoid the generation ofcondensation.Ph (707) 996-5201 Fx (707) e-mail:***************************Data Sheet ER0515EJ1V0DS104. Notes on mounting relays- When mounting a relay onto a PC board using an automatic chip mounter, if excessive force is applied to the cover of the relay when the relay is chucked or inserted, the cover may be damaged or the characteristics of the relay degraded. Keep the force applied to the relay to within 1 kg.- Avoid bending the pins to temporarily secure the relay to the PC board. Bending the pins may degrade sealability or adversely affect the internal mechanism.- It is recommended to solder the relay onto a PC board under the following conditions: <1> Reflow solderingRefer to the recommended soldering temperature profile. <2> Flow solderingSolder temperature: 250°C max., Time: 5 to 10 seconds, Preheating: 100°C max./1 minute max. <3> Manual solderingSolder temperature: 350°C, Time: 2 to 3 seconds- Ventilation immediately after soldering is recommended. Avoid immersing the relay in cleaning solvent immediately after soldering due to the danger of thermal shock being applied to the relay.- Use an alcohol-based or water-based cleaning solvent. Never use thinner and benzene because they may damage the relay housing.- Do not use ultrasonic cleaning because the vibration energy generated by the ultrasonic waves may cause the contacts to remain closed.5. Handling- Relays are packaged in magazine cases for shipment. If a space is created in the case after some relays have been removed, be sure to insert a stopper to secure the remaining relays in the case. If relays are not well secured, vibration during transportation may cause malfunctioning of the contacts.- Exercise care in handling the relay so as to avoid dropping it or allowing it to fall. Do not use a relay that has been dropped. If a relay drops from a workbench to the floor, a shock of 9,800 m/s 2 (1,000 G) or more is applied to the relay, possibly damaging its functions. Even if a light shock has been applied to the relay, thoroughly evaluate its operation before using it.- Latching relays are factory-set to the reset state for shipment. A latching relay may be set, however, by vibration or shock applied while being transported. Be sure to forcibly reset the relay before using it in the application set. Also note that the relay may be set by unexpected vibration or shock when it is used in a portable set.- The sealability of a surface-mount relay may be lost if the relay absorbs moisture and is then heated during soldering. When storing relays, therefore, observe the following points:1. The storage humidity must be no more than 70% RH. The recommended storage period is 3 months maximum.2. To store the relay for 3 months or longer, keep the storage humidity to within 50% RH. Do not store the relay for more than 6 months.- The relay maintains constant sealability under normal atmospheric pressure (810 to 1,200 hpa). Its sealability may be degraded or the relay may be deformed and malfunction if it is used under barometric conditions exceeding the specified range.- The same applies when the relay is stored or transported. Keep the upper-limit value of the temperature to which the relay is exposed after it is removed from the carton box to within 50°C.- If excessive vibration or shock is applied to the relay, it may malfunction and the contacts remain closed. Vibration or shock applied to the relay during operation may cause considerable damage to or wearing of the contacts. Note that operation of a snap switch mounted close to the relay or shock due to the operationof magnetic solenoid may also cause malfunctioning.H u m i d i t y (%R H )85806040205−60−40−2020406080100Temperature (°C)Ph (707) 996-5201 Fx (707) e-mail:***************************No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or a n y o th e r l i a b i l i t y a r i s i n g f r o m u s e o f s u c h d e v i c e. N o l i c e n s e , e i t h e r e x p r e s s , i m p l i e d o r otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.W h i l e N E C C o r p o r a t i o n h a s b e e n m a k i n g c o n t i n u o u s e f f o r t t o e n h a n c e t h e r e l i a b i l i t y o f i t s e l e c t r o n i c components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC electronic component,customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades:"S t a n d a r d ," "S p e c i a l ," a n d "S p e c i f i c ". T h e S p e c i f i c q u a l i t y g r a d e a p p l i e s o n l y t o d e v i c e s d e v e l o p e d b a s e d o n a c u s t o m e r d e s i g n a t e d "q u a l i t y a s s u r a n c e p r o g r a m " f o r a s p e c i f i c application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application.Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robotsSpecial: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, a n t i -d i s a s t e r s y s t e m s , a n t i -c r i m e s y s t e m s , s a f e t y e q u i p m e n t a n d m e d i c a l e q u i p m e n t (n o t specifically designed for life support)S p e c i f i c : A i r c r a f t s , a e r o s p a c e e q u i p m e n t , s u b m e r s i b l e r e p e a t e r s , n u c l e a r r e a c t o r c o n t r o l systems, life support systems or medical equipment for life support, etc.The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets o r D a t a B o o k s. I f c u s t o m e r s i n t e n d t o u s e N E C d e v i c e s f o r a p p l i c a t i o n s o t h e r t h a n t h o s e s p e c i f i e d f o r S t a n d a r d q u a l i t y g r a d e , t h e y s h o u l d c o n t a c t a n N E C s a l e s r e p r e s e n t a t i v e i n a d v a n c e.(Note)(1) "N E C " a s u s e d i n t h i s s t a t e m e n t m e a n s N E C C o r p o r a t i o n a n d a l s o i n c l u d e s i t s m a j o r i t y - owned subsidiaries.(2) "NEC electronic component products" means any electronic component product developed or manufactured by or for NEC (as defined above).DE02023/0119654 Eighth Street East, PO Box 517Sonoma, CA 95476-0517 USA Ph (707) 996-5201 Fx (707) e-mail:***************************。
台达变频器说明书VFD-M变频器说明书
最好適當包裝存放在架子或台面。
安裝方向與空間
為了使冷卻循環效果良好，必須將變頻器安裝在垂直方向，因變頻器底部裝有冷郤風扇以強制風 冷，其上下左右與相鄰的物品和擋板(牆)必須保持足夠的空間。如下圖所示：
150mm
50mm 50mm
150mm
冷空氣
安裝環境
▲ 無水滴、蒸氣、灰塵及油性灰塵之場所。 ▲ 無腐蝕、易燃性之氣、液體。 ▲ 無漂浮性的塵埃及金屬微粒。. ▲ 堅固無振動之場所。
輸出頻率 條碼
生產管制序號
MODE
: VFD007M23A
INPUT
: 3PH 200-240V 50/60Hz 6.0A
OUTP UT : 3PH 0-240V 5.0A 1.9kVA 1HP
Freq. Range :0.1~400Hz
0 0 7 M 2 3 A 0 T 0 0 11 2 3 0
型號說明
VFD-M 系列
第 二 章
2-7
第三章 配線
V控制回路 。 用戶可將輸出／輸入端子的蓋子掀開，此時可看 到主回路端子及控制回路端子，用戶必須依照下列之配線回路確實連接。
下圖為 VFD-M出廠時變頻器的標準配線圖。若僅用數字控制面板(LC-M2E)操作時，只有主回
路端子配線。
制動電 阻(選購) 第
三
主 回 路 端 子 的 規 格 為M3.0
B1
B2 三相感應電機
章
無熔絲斷路器
R NFB S
R(L1) S(L2)
U V
M 3~
W
T
T(L3)
E
第三種接地
SA
23 0系 列 接 地 阻 抗10 0Ω 以 下
MC
RB
OWI 产品说明书：IC5、IC6、IC570V40、IC570V10、IC670V10 和 IC6
OWI INCUSER MANUALModel: IC5, IC6, IC570V40, IC570V10, IC670V10, IC6DVCSpeaker Combination ModelsIC5TBBC / IC6TBBCIC570V04TBBC / IC570V10TBBC / IC670V10TBBC / IC6DVCTBBCEstablished 1978OWI Incorporated17141 Kingsview Ave. Carson CA 90746-1207 USATel. 310-515-1900 Fax 310-515-1606********************Technical Support 310-515-1900PROPRIETARY NOTICEThe OWI Inc. product information and design disclosed herein were originated by and are the property of OWI Inc. OWI Inc. reserves all patent, proprietary design, manufacturing, reproduction, use and sales rights thereto, and to any article disclosed therein, except to the extent right(s) are expressly granted to others.COPYRIGHT NOTICEThis manual is Copyright 2014 by OWI Inc. All rights reserved. Reproduction in whole or in part without written prior permission from OWI, Inc. is prohibited.UNPACKING AND INSPECTION NOTICEImmediately upon receipt of the equipment, inspect the shipping container and the contents carefully for any discrepancies or damage. Should there be any, notify the freight company and OWI, Inc. or the dealer where purchased at once.LIMITED WARRANTY1. This product has been thoroughly tested and inspected at the factory. It is warranted for one year from thedate of purchase.IT IS THE OWNERS’ RESPONSIBILITY TO ESTABLISH THE DATE OF PURCHASE BY ACCEPTABLE EVIDENCE AT TIME SERVICE IS SOUGHT.2. Any unit, which in the judgment of OWI INC, is defective or develops defects under normal use will be replacedor repaired without cost within the warranty period.3. This warranty will be considered void if the unit is dropped, misused, abused and altered in any manner,overdriven with e xcess amplification exceeding manufacturer’s specification, improperly serviced or accidentally damaged.4. OWI Inc. shall have no liability whatsoever for consequential damages. The sole responsibility at the discretionof OWI Inc. under this warranty shall be limited to the repair of the product or replacement thereof. Any and all implied warranties including the implied warranty of merchantability are limited to the duration of this express limited warranty.OWI, Inc. is NOT liable for incidental or consequential damages of any kind.5. IMPORTANT: This warranty is void unless the attached card is completed and mailed to OWI Inc. within 10days following the date of purchase. Units must be sent to OWI Inc. or to the dealer where purchased. RETURN SHIPPING INSTRUCTIONS, Obtain a RETURN AUTHORIZATION from:OWI Inc., 17141 Kingsview Ave, Carson, CA 90746.Phone (310) 515-1900, Fax (310) 515-1606FCC Notice: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or own expense.Modifications not expressly approved by the manufacturer could void the user’s authority to be operated under FCC rules.Table of ContentsIMPORTANT SAFETY INSTRUCTIONS____________________________________________________________________________________________________CAUTIONRISK OF ELECTRIC SHOCK - DO NOT OPEN____________________________________________________________________________________________________ NOTE: Installation is to be completed by a qualified electrical technician according to NEC/CEC code and applicable local codes.CAUTION: The power supply is not to be used in air handling spaces.CAUTION: To reduce the risk of electric shock: Do not remove the cover or back: No user-serviceable parts inside: refer servicing to qualified personnel.The lighting flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of unins ulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions. All the safety and operation instructions should be read before this OWIproduct is operated.2. Keep these instructions - The safety and operating instructions should be kept for future reference.3. Heed all warnings - All warnings on this product and in these operating instructions should befollowed.4. Follow all instructions - All operating and other instructions should be followed.5. Do not use this apparatus near water - for example, near a bathtub, washbowl, kitchen sink, laundrytub, in a wet basement, near a swimming pool, or a swamp.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -This OWI product should be situated so that its location or position does not interfere with its proper ventilation. For example, the component should not be situated on a bed, sofa, rug, or similar surface that may block any ventilation openings, or placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through ventilation openings.8. Do not install the unit near any heat sources such as radiators, heat registers, stoves or otherapparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has twoblades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, conveniencereceptacles, and the point where they exit the apparatus.11. Only use attachment/accessories specified by the manufacturers.Portable Cart Warning12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with theapparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The user should not attempt to service this OWI product beyond those means described in this operating manual. All other servicing should be referred to the OWI Service Department.15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain ormoisture.16. To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or otheroutlet unless the blades can fully be inserted to prevent blade exposure.17. Exposure to extremely high noise levels may cause permanent hearing loss. Individuals varyconsiderably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart. According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels use hearing protectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent a permanent hearing loss if exposure is in excess of the limits set forth here.18. OWI recommends that this apparatus be placed on a switched power outlet, one that switches bothsides and has contact separation of at least 3 millimeters.End of IMPORTANT SAFETY INSTRUCTIONSMODEL IC5 / IC6 / IC6DVCSPEAKER SPECIFICATIONS:MODEL IC5 MODEL IC6 MODEL IC6DVCMODEL IC570V04 / IC570V10 / IC670V10SPEAKER SPECIFICATIONS:MODEL IC570V04 MODEL IC570V10 MODEL IC670V10INSTALLATION:Speaker PlacementBefore installing your OWI speakers, consider the placement carefully, taking into effect the location of electrical, plumbing and other fixtures.Placement in CeilingOWI speakers should be ideally located above the primary listening area.Placement in WallOptimum sound will be achieved when your OWI speakers are installed at ear level or slightly higher and the listening area is no closer to the speakers than the distance between the speakers themselves.Mounting your OWI SpeakersDetermine the best area to mount your OWI speakers. It will be necessary to run your speaker wires to that location. This location must be free of obstructions, such as electrical conduits, HVAC ducts, or water lines.Be sure the mounting surface is between 3/8 and 1 1/4 inches thick and there is at least a 3 1/2inch clearance behind the mounting surface and no wall studs or other objects block the back of the speaker.Remove the round cardboard disc from the cutout template supplied and keep it for later use as a paint mask, if you decide to paint your speakers.Use the template to mark the position for the mounting hole at the selected location. If you are not certain that no obstruction exists (electrical wiring. plumbing. etc.), you should start by cutting a small hole in the center of your penciled mounting hole with a drywall or keyhole saw, cutting at a 45 degree angle towards the inside of the hole. Cutting a small hole at this angle will make drywall repair much easier. Once you have determined there are no obstructions in your desired mounting location, start cutting the finished hole at a 900angle to the wall/ceiling surface.Route the speaker wires from your amplifier to your opening. Avoid routing the speaker wire near electrical wires. If you have to run them parallel, make certain to space the speaker wires at least 2 feet from the AC line. Do not nail or staple the speaker wire.Preparing your OWI Speakers for MountingInsert a paper clip into one of the grille openings, then pull upwards to remove the grille.Be sure to position the four Mounting Tabs on your OWI speaker inward then insert the four screws (supplied) from the front of the speaker into the screw opening.Attach the speaker wires to the speaker terminals.Insert your OWI speaker into the opening and tighten the four screws. As you tighten the screws, the tabs will automatically flip into an outward position thereby clamping the drywall between the feet and the flange of the speaker. BE CAREFUL NOT TO OVER TIGHTEN, OVER TIGHTENING MAY WARP THE BAFFLE, CRACK THE WALL, CAUSE THE FLANGE TO DISTORT AND MAKE THE GRILL DIFFICULT TO INSTALL.Push the grille firmly into the slot in the speaker baffle.Painting your OWI SpeakersThe speakers' other surfaces are primed to accept ordinary latex wall paint or aerosol spray paint. The surface of the speaker behind the grille should remain black and must not be painted. It is necessary to mask this area with the center of the template that you have cut out.The grille can be painted as well, but great care must be taken not to clog the holes in the grille as this will greatly reduce the sound quality of the speakers. It is recommended that only light spray painting using 5 parts thinning agent to 1 part paint be used. Do not paint the grilles while they are attached to the speaker.Proper Wire Gauge SelectionThe gauge of wire required is determined by the distance between your amplifier/receiver and the speakers. Use the following chart as a guide:Length Minimum GaugeLess than 10 feet 18 - 20 Gauge 10 to 100 feet 16 to 18 Gauge Over 100 feet 14 GaugeOWI SPEAKER SYSTEM LIMITED WARRANTY REGISTRATION(Save this portion for your records)1. Your OWI Speaker System has been thoroughly tested and inspected at the factory.It is warranted for 5 years from date of purchase.IT IS THE OWNERS’ RESPONSI BILITY TO ESTABLISH THE DATE OF PURCHASE BY ACCEPTABLE EVIDENCE AT TIME SERVICE IS SOUGHT.2. WHAT WE WILL PAY FOR AND WHAT YOU MUST PAY FOR:OWI INC. will repair or replace unit(s) covered by this warranty, without charge to the consumer for labor or materials. YOU ARE RESPONSIBLE FOR ANY INSTALLATION OR REMOVAL CHARGES AND FOR ANY INITIAL SHIPPING CHARGES if the unit(s) must be shipped for warranty service.However, we will pay the return shipping charges to any destination within the U.S.A. if the repairs are covered by the warranty.3. Any unit which in the judgment of OWI Inc. is defective or develops defects under normal use will bereplaced or repaired without cost within the warranty period.4. This warranty will be considered void if unit has been dropped, misused, abused, altered in anymanner, overdriven with excessive amplification exceeding manufacturer’s specification, improperly serviced or accidental damage.5. OWI Inc. shall have no liability whatsoever for consequential damage. The sole responsibility anddiscretion of OWI Inc. under this warranty shall be limited to the repair of the product or replacement thereof.6. IMPORTANT: This warranty is void unless the attached card is completed and mailed to OWI Inc.within 10 days following the date of purchase. Units must be sent to OWI Inc. or to the dealer where purchased.OWI INCORPORATED Date Purchased: ________________________17141 Kingsview Ave Model Number: ________________________Carson, CA 90746-1207 USA Serial Number: ________________________(Keep this part for your record)-------CUT AND MAIL----------------------------------------------------OWI INCORPORATED17141 Kingsview AveCarson, CA 90746-1207 USALIMITED WARRANTYModel Number:_________________________________Model Name: __________________________________Serial No. _____________________________________Date of Purchase: Month: __________ Day ____ Year ______Owner’s Name: ______________________________________Address: ________________________________________City: _______________________ State __________ Zip_______Dealer’s Name: _________________________ City______________ State ________Purchased from (please check one):Video ____, Electronic ____, Mailorder ___, Mass Merchandiser ___, Installer ___Others (please specify) __________________________________________________Remarks: __________________________________________________________________________________________________________________________________Established 1978OWI Incorporated17141Kingsview Ave. Carson CA 90746-1207 USA Tel. 310-515-1900 Fax 310-515-1606www.owi-inc.om。
MI-P6PZ-IXY中文资料
元器件交易网MI - MegaModTMFamilyMilitary Chassis Mount DC-DC Converters 10 to 300W Single, Dual, Triple OutputsFeaturesInputs: 28, 155, 165 and 270Vdc Any output: 2 to 48Vdc Up to 13.5W/in3 High efficiency Size — 1- up half-size: 2.58" x 2.5" x 0.62" (65,5 x 63,5 x 15,7mm) Size — 1- up full-size: 4.9" x 2.5" x 0.62" (124,5 x 63,5 x 15,7mm) Size — 2- up half-size: 2.58" x 4.9" x 0.62" (65,5 x 124,5 x 15,7mm) Size — 2- up full-size: 4.9" x 4.9" x 0.62" (124,5 x 124,5 x 15,7mm) Size — 3- up half-size: 2.58" x 7.3" x 0.62" (65,5 x 185,4 x 15,7mm) Size — 3- up full-size: 4.9" x 7.3" x 0.62" (124,5 x 185,4 x 15,7mm)Product HighlightsVicor’s MI-MegaMod family of single, dual, and triple output DC-DC converters provide power system designers with costeffective, high-performance, offthe-shelf solutions to applications that might otherwise require a custom supply. Incorporating standard MI-200 or MI-J00 family converters in rugged, chassis mount packages, MegaMods can be ordered with single, dual, or triple outputs, having a combined output power of up to 300W. Totally isolated outputs eliminate efficiency penalties and output interaction problems.Remote sense ZVS/ZCS power architecture Low noise FM controlConfiguration ChartFull-Size MegaMods Single Output MI-L – MI-M – MI-N – Dual Output MI-P – MI-Q – Triple Output MI-R Number of Modules 1 2 3 2 3 350 – 100W 150 – 200W 300W 100 – 200W 200 – 300W – 150 – 300W4.9" x 2.5" x 0.62" 4.9" x 4.9" x 0.62" 4.9" x 7.3" x 0.62" 4.9" x 4.9" x 0.62" 4.9" x 7.3" x 0.62" 4.9" x 7.3" x 0.62"Half-Size MegaMods Single Output MI-LJ – Dual Output MI-PJ – Triple Output MI-RJ –10 – 50W 20 – 100W 30 – 150W2.58" x 2.5" x 0.62" 2.58" x 4.9" x 0.62" 2.58" x 7.3" x 0.62"1 2 3Input Voltage Nominal Range Transient2 =28Vdc 5 =155Vdc 6 =270Vdc 7 =165Vdc 18 – 50V (1) 60V 100 – 210V 230V 125 – 400V(2) 475V 100 – 310V (3)Output VoltageZ = 2V Y = 3.3V 0 = 5V X = 5.2V W= 5.5V V = 5.8V T = 6.5V R = 7.5V M = 10V 1 = 12V P = 13.8V 2 = 15V N = 18.5V 3 = 24V L = 28V J = 36V K = 40V 4 = 48VProduct Grade Full-SizeI = –40°C to +85°C M = –55°C to +85°CHalf-SizeI = –40°C to +100°C M = –55°C to +100°COutput Power/Current Full-Size Half-Size ≥5V <5V ≥5V <5VY X W V = 50W 10A A = 10W — = 75W 15A Z = 25W 5A = 100W 20A Y = 50W 10A = — 30AOutput Power/Current ≥5V <5VV U S = = = 150W 200W — 30A — 60AOutput Power/Current ≥5V <5VS P = = 300W — — 90A(1) (2)(3)16V operation at 75% load. These units rated at 75% load from 125 – 150Vin: Full-size – 5Vout @ 100W; 2Vout and 3.3Vout @ 30A Half-Size – 5Vout @ 50W; 2V and 3.3V @ 10A. For use with Vicor’s MI-AIMMI-MegaMod 10/021 of 4元器件交易网SpecificationsFull-Size(At TBP = 25°C, nominal line and 75% load, unless otherwise specified)PARAMETER Input Characteristics Inrush charge Input reflected ripple current – pp: Input ripple rejection 120 x 10 10-6MINTYPMAX 200 x 10-6UNITS Coulombs % Iin dB dB Watts % Vnom % Vnom % Vnom % / °C %/1K hours mV % % Vnom Vdc % Vnom % Inom % Inom Ohms Ohms Vdc Vdc mA Vrms Vrms VrmsNOTES Nominal line, per module Nominal line, full load 120Hz, nominal line 2400Hz, nominal line Per moduleVin (Vout) Vin 20 + 20Log (Vout) 30 + 20Log 1.35 0.5 0.05 0.2 0.01 0.02 80 0.75 2.0 1.0 0.2 0.5 0.02 150 1.5 110 135 125 130No load power dissipation Output Characteristics Setpoint accuracy Load/line regulation Load/line regulation Output temperature drift Long term drift Output ripple – p-p: ≤10V 12-48V Output voltage trimming(1) 50 Total remote sense compensation 0.5 OVP setpoint 115 Current limit 105 Short circuit current Control Pin Characteristics Gate out impedance Gate in impedance Gate in open circuit voltage Gate in low threshold Gate in low current Isolation Characteristics Isolation (input to output) Isolation (output to baseplate) Isolation (input to baseplate) Thermal Characteristics Efficiency Baseplate to chassis Thermal shutdown Mechanical Specifications Weight 1-up 2-up 3-up(1)LL to HL, 10% to FL LL to HL, NL to 10% Over rated temperature 20MHz bandwidth 20MHz bandwidth 0.25V max. neg. leg Recycle power Automatic restart12550 103 6.0 0.65 6.0 3,000 500 1,500 80-90 0.1 95Use open collector90105% °C/Watt °C9.0 (255) 1.2 (525) 1.7 (780)ounces (grams) pounds (grams) pounds (grams)10V, 12V, and 15V outputs, standard trim range ±10%. Consult factory for wider trim range.MI-MegaMod 10/022 of 4元器件交易网SpecificationsHalf-Size(At TBP = 25°C, nominal line and 75% load, unless otherwise specified)PARAMETER Input Characteristics Inrush charge Input reflected ripple current – pp: Input ripple rejection 60 x 10 10-6MINTYPMAX 100 x 10-6UNITS Coulombs % Iin dB dB Watts % Vnom % Vnom % Vnom % / °C %/1K hours mV % % Vnom Vdc % Inom Ohms Ohms Vdc Vdc mA Vrms Vrms VrmsNOTES Nominal line, per module Nominal line, full load 120Hz, nominal line 2400Hz, nominal line Per moduleVin (Vout) Vin 20 + 20Log ( Vout) 30 + 20Log 1.35 0.5 0.05 0.2 0.01 0.02 80 0.75 2.0 1.0 0.2 0.5 0.02 150 1.5 110 125 50 103 6.0 0.65 6.0 3,000 500 1,500 80-90 0.1No load power dissipation Output Characteristics Setpoint accuracy Load/line regulation Load/line regulation Output temperature drift Long term drift Output ripple – p-p: ≤10V 12-48V Output voltage trimming(1) 50 Total remote sense compensation 0.5 Current limit 105 Control Pin Characteristics Gate out impedance Gate in impedance Gate in open circuit voltage Gate in low threshold Gate in low current Isolation Characteristics Isolation (input to output) Isolation (output to baseplate) Isolation (input to baseplate) Thermal Characteristics Efficiency Baseplate to chassis Mechanical Specifications Weight 1-up 2-up 3-up(1)LL to HL, 10% to FL LL to HL, NL to 10% Over rated temperature 20MHz bandwidth 20MHz bandwidth 0.25V max. neg. leg Automatic restartUse open collector% °C/Watt4.5 (127) 8.8 (250) 13.3 (377)ounces (grams) ounces (grams) ounces (grams)10V, 12V, and 15V outputs, standard trim range ±10%. Consult factory for wider trim range.MI-MegaMod 10/023 of 4元器件交易网Mechanical DrawingInputsHALF-SIZE 2.58 MODULE: (65,5) 4.90 TYP. (124,5)SER. NO.Outputs0.53 TYP. (13,5)Side view (all models)1-UpL- and LJ-Seriesø.150 (ø3,81) THRU C'BORE ø.250 (ø6,35) X .170 (4,32) DEEP A 2MEGA MODULE DC-DC CONVERTERL- and LJ-Series0.16 (4,1) 1 2.18 (55,4) 4 0.19 TYP. (4,8) TOP VIEW 2.76 TYP. (70,1) 5.52 TYP. (140,2)B C D EBaseplate (TYP.) 2.50 TYP. (63,5)30.62 TYP. (16.0) HALF-SIZE MODULE: 3.20 (81,3)HALF-SIZE 1.60 MODULE: (40,6)2-Up1P- and PJ-Series0.19 (4,8) 1M-SeriesM-SeriesP- and PJ-SeriesAA B C D E F G H 4.90 (124,5) TYP.2 32.26 (57,4)2MEGA MODULETMBDC-DC CONVERTER3C D5 6 42.26 (57,4)5 4 E 0.25 (6,4) TYP.J KTOP VIEW3-UpR- and RJ-Series1 2 3 1 1 2 3 2.26 (57,4) 3 D F 5 6 6.94 (176,3) E F 7 8 4 7 8 4 TOP VIEW 2.26 (57,4) 4 7 E G H J K P Q M N G H J K L 7.32 TYP. (185,9) 2MEGA MODULE DC-DC CONVERTERQ-Series0.19 (4,8)N-SeriesN-SeriesA B CQ-SeriesR- and RJ-SeriesA B C D D BA C EInputs1 2 3 4 –Input Gate Out #1 Gate In #1 +Input 5 6 7 8 Gate Gate Gate Gate Out #2 In #2 Out #3 In #3Outputs Output #1 A –Output B –Sense C Trim D +Sense E +Output Output #2 F –Output G –Sense H Trim J +Sense K +Output Output #3 L –Output M –Sense N Trim P +Sense Q +OutputMounting Information Use #6 machine hardware torqued to 5-7 in-lbs.MI-MegaMod 10/024 of 4。
MD7LWA LonWorks (ultra-slim, FTT-10A) 产品说明书
MODEL: MD7LWA Lightning Surge Protectors forElectronics Equipment M-RESTERLIGHTNING SURGE PROTECTOR FORLonWorksMODEL: MD7LWA–[1][2]Specify a code from below for each of [1] and [2].(e.g. MD7LWA-FF/Q)•Specify the specification for option code /Q(e.g. /C01)[1]SHIELD TERMINAL (to earth)FF: FloatingFG: Grounding[2]OPTIONSblank: none/Q: Options other than the above (specify the specification)/C01: Silicone coating/C02: Polyurethane coatingThis unit is not applicable to LonWorks Link Power network.Degree of protection: IP20Connection: Euro terminal block (torque 0.3 N·m)Applicable wire size: 0.2 – 2.5 mm2, stripped length 8 mmGrounding: DIN RailHousing material: Flame-resistant resin (black)Operating humidity: 30 to 90 %RH (non-condensing)Mounting: DIN Rail (TH35-7.5, 1-mm-thick)Oxide film on the surface of an aluminium DIN rail maylower the electric conductivity between this module and theground. Use a steel or copper rail.Weight: 70 g (2.5 oz)LINE TOLINELINE TOEARTHSHLD TOEARTHMax. continuousoperating voltage (Uc)±1.5V±100V±160V*1Voltage protection level(Up) @4kV (1.2 / 50 µs)±30V±370V±800V*1Leakage current @Uc≤ 5µA≤ 20µA≤ 5µA*1Response time≤ 4 nsec.≤ 20 nsec.≤ 20 nsec.*1Approx. capacitance@10 kHz100 pF100 pF 5 pF*1Max. discharge current(Imax)20kA (8 / 20 µs)1.0kA (10 / 350 µs)Nominal current (I N)100mAInternal series resistance≤ 3.3Ω including returnInsertion loss-0.5 dB max. @DC...5 MHz, Z0 = 100ΩSurge protection IEC 61643-21 Categories C1, C2, D1*1. V alues for the oating type (FF). Shortcircuited for the ground-ing type (FG).EMC DirectiveEMI EN 61000-6-4EMS EN 61000-6-2RoHS Directive056 222 38 18SEN TRONICAG8–M3 EURO*1. Be sure to use twisted-pair cables.*2. Choose the M-RESTER – FG when the shield wire is to be grounded.*3. When the twisted-pair cable is with a shield, connect it to the surge protector’s terminal 8, and follow instructions given by the protecteddevice for the terminal 7. When SHLD is not isolated from NET A / B, DO NOT connect the terminal 7 to SHLD.*4. Oxide film on the surface of an aluminium rail may lower the electric conductivity between this module and the ground. Use a steel or copper rail.*5. Be sure to ground the DIN rail. Recommended grounding resistance max. 100 ohms.*6. Cross-wire from the DIN rail to the metal housing of the protected device to equalize the ground potential.Ground only the surge protector when the protected device has no grounding terminal.Protected Devices (Nodes)Protected Devices (Nodes)• T he M-RESTER is applicable to networks which consist only of FTT-10A. Not applicable to the ones connected to Link Power network.• The maximum number of nodes connectable to the network segment is reduced by one when one unit of M-RESTER is added.• When the distance between nodes are relatively long (e.g. grouped and separated by cabinets),install the M-RESTER by each group of devices. Insert the M-RESTER at the surge side of the network.• For detailed information on the network, refer to L ON W ORKS FTT-10A Free Topology Transceiver User’s Guide provided by Echelon.。
GARMIN nuvi 255W 说明书
n 255W üvi1特 別 聲 明本中文操作說明書版權屬台灣國際航電股份有限公司所有，任何人（及單位）未經其正式之書面授權允許，不得私自將本說明書內容，以全部或分割部份方式（包含文字與圖片），進行轉載、轉印、影印拷貝、更改內容、掃描儲存等行為，供他人使用或銷售。
台灣國際航電股份有限公司（Garmin Corporation ）擁有更改或提升本產品功能的所有權利，且不需額外特別通知任何人及單位（包含已購買及尚未購買者），若有任何功能上的問題，可以注意本公司的文宣資訊或上網查詢（中文網站： ）。
Garmin®、AutoLocate®、MapSource®、nüvi® 均經商標註冊登記，未經台灣國際航電股份有限公司（Garmin Corporation ）正式授權許可，任何人（及單位）均不得私自使用。
台灣國際航電股份有限公司並已獲授權註明使用SanDisk®產品。
智慧財產權宣告中文手寫辨識系統，為蒙恬科技股份有限公司所擁有；本機功能及內容僅提供本產品購買人使用，不得私自轉載、轉印、影印拷貝、更改內容、掃描儲存於他人或其他用途。
而本機所標示之商品文字或圖片僅為說明輔助之用，非做為商標之使用，原商品商標之智慧財產權為原權利人所有。
台灣國際航電股份有限公司臺北縣221汐止市樟樹二路68號電話：02-26429199 傳真：02-26429099 網站： 2008年06月 190-00909-21 Rev. A Printed in Taiwan注意事項全球衛星定位系統（Global Positioning System，GPS），是由美國國防部發展及管理，並負責該系統的正常運作及定位精度的控制，基於美國本身的政策考量或國防安全，美國有權在不預先通知或公告的狀況下，影響整個系統的功能或定位精度（Accuracy），另外在使用本產品時，由於使用的場合、環境及應用方式不同，使用者必須特別注意下列事項或說明：雖然已是一個精密的電子導航輔助儀器，但是仍然可能因為使用者錯誤的操z nüvi255W作方式、外在干擾或故障因素等，而變得不安全，因此使用者需自行承擔風險。
霍尼韦尔 206 脉冲传输器 说明书
MIWI350 REMOTE PULSAR QUICK START GUIDE206 pulsetransmitterProduct OverviewThe Model 206 Pulse Transmitter from Mercury Instruments is an adaptable solution for transmitting uncorrected volume pulses to a remote EVC. Refer the below pulse input wiring for the interface drawing connections from 206 Pulsar to MIWI350.Electrical Wiring - Remote Pulsar to MIWI350 device40-6189 Wiring DiagramMIWI350(TB2)WHT206 PULSAR(E1)1+A+BLK1-A-TWISTEDRED PAIR WIRE2+B+BLK B-2-MIWI350H L02Pulsar to MIWI cable connectionsFollow the below steps carefully to interface the Pulsar and MIWI350.Insert the interfacing cable (40-6189) from the Pulsar through the Pulse Input Gland on MIWI350 device.Plug the interfacing cable (40-6189) to the 4-pin connector of the IO Board (TB2).Refer Detail L & 40-6189 Wiring Diagram from page 2.The other end of the interfacing cable (40-6189) runs to the Pulsar Output gland.0103The connector must be inserted into thePulsar Board as per the Electrical Wiring diagram.Refer Detail H & 40-6189 Wiring Diagram from page 2.The final wiring arrangement will be as below. Cross check each connection with the Remote Pulsar Electrical wiring explained in page 2 in detail.040522-3194-KIT NOTESList of associated cable assemblies pre-installed in the devicePart NumberDescriptionKIT, ASS Y, MECHANIC AL UNCORR SW INPUT BOARD40-1583-KIT WIRE-3 COND.24 AWG BELD 953340-6189-KITKIT, PULSE OUTPUT C ABLE 206 PULSER TO MIWI350For more information:To learn more aboutHoneywell’s Smart Gas Metering Solutions, visit: or contact your Honeywell Process Solutions representative.Honeywell Process Solutions1280 Kemper Meadow Drive Cincinnati, OH 45240855-2511-7065 - United States & Canada 302-669-4253 - Outside the United States ****************************©2020 Honeywell International Inc。
洛雷技术LH300T22系列智能触摸监控系统说明书
KEEP IN TOUCH—STAY CONNECTED.TOUCH OPERATIONSMART-PHONE & TABLET VIEWING†MAC & PC INTERNET MONITORING RECORD 70 DAYS TO 18 MONTHS EASY CONNECT SETUP WIZARDINTUITIVE TOUCH NAVIGATIONHigh resolution viewing and exceptional playback.PROFESSIONAL-GRADE VIDEO SURVEILLANCEAn expandable system that you can depend on.SLIM DESIGN AND SILENT OPERATIONYou can easily conceal you DVR.ANTI-GLARE TECHNOLOGYGet clear images under any lighting conditions.ULTIMATE CONNECTIVITYKeep in touch using any device from anywhere in the world.* For the latest smart phone compatibility list & free Appdownload† check •H.264 video compression.¹ DVI/VGA, HDMI compatible••Pentaplex operation - View, Record, Playback, Back Up & Remotely Control the system simultaneously •Recording options : Motion, schedule or continuous•Small form factor (7.0x11.5x1.5”)•“Flex” IR controller (line-of-sight not required)•USB: backup, image transfer, firmware upgrade, mouse & Touch operation•PTZ cameras supported (RS485)CONNECTIVITY•Instant Mobile Viewing on compatible Smart phones†•Exclusive LOREX Easy Connect Internet Set-up Wizard²•PC (Microsoft Windows™ 7/Vista/XP compatible) using Internet Explorer®•Mac™ compatible using Safari browser•Free LOREX DDNS (Dynamic Domain Name Service) for advanced remote connectivity at all times •Instant e-mail alertsTOUCH SCREEN MONITOR•21.5” Touch Screen LCD, 1920x1080 resolution•Optical, multi-touch technologyWHAT’S INSIDE IN THE BOX:•21.5” LED Touch Screen Monitor•DVR with pre-installed HDD*•High-resolution cameras*•Easy-to-follow setup instruction guide and manual•ALSO INCLUDES: Remote Control, Power Adapters, Mouse, Ethernet Cable, DVI to VGA •Converter, 60ft Camera Extension Cables per camera, USB, VGA, DVI Cables.VESA MOUNTEasily mounts to the back of an LCD monitor†† (Requires clear access tothe VESA mounting holes). DIGITAL VIDEO RECORDER:•High resolution AIS (Advanced Image Sensor) 480 TV lines •Lorex Pure Flat lens eliminates image curving•Exclusive infrared filter achieves accurate color reproduction in lighting conditions •Advanced day/night mode - picture automatically switches to B&W delivering better clarity in all low light conditions •Night vision range up to 75 ft. (25 m)** •Install indoors or outdoors (IP66)*** •Ceiling, counter or wall mountableCAMERAS (CVC6996):MOUNTING OPTIONSWall mountCeiling mountTable mountAIS IMAGE SENSOR + EXCLUSIVE INFRARED FILTER TECHNOLOGYAccurate color reproduction in varying lighting conditionsPURE FLAT™ LENSANTI-GLARE TECHNOLOGYEliminates image curving for an undistorted viewClear images under strong lighting conditions180mm/7.0”Dimensions:DISCLAIMERS:1. Recording time may vary based on recording resolution & quality, lighting conditions and movement in the scene.2. Requires a high speed internet connection and a router (not included).• DVI to HDMI converter cable required. (not included).† Instant Mobile Viewing on iPad™, iPhone™ , BlackBerry (supported model numbers: 9700, 9800, 9000, 8900), Android (version 1.5 & above) and Window Mobile (6.0 & above). Selectable one channel live viewing. Mobile phone data plan is required (not included). Router port forwarding required. For the latest smart phone compatibility list check as new smart phone models become available in the market.†† Easily mounts to the back of an LCD monitor with VESA standard mounting holes and an independent stand. Requires clear access to the 100 x100 mm VESA mounting holes.* Number of Channels/ Cameras/ Accessories/ HDD (hard disk drive) capacity may vary by model. Check your package label for specific content information.** Night vision range up to 75 ft. (23 m) in ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application.*** Not intended for submersion in water. Installation in a sheltered location recommended.All trademarks belong to their respective owners. No claim is made to the exclusive right to use the trademarks listed, other than the trademarks owned by Lorex Technology Inc. We reserve the right to change models, configurations or specifications without notice or liability. Product may not be exactly as shown. Images are simulated.SYSTEMOperating System: Linux (embedded)Pentaplex: Simultaneous View, Record, Playback, Backup & Remote MonitoringNumber of Channels: 8/16 ChannelInputs/OutputsVideo In: 8/16 x 1Vp-p, 75ohms, BNCDVI Out : DVI compatible. DVI to VGA Converter includedAudio In: 2 Line in(RCA)Audio Out: 2 line out(RCA)USB Port: 2 front & backAlarm In: 4 x TTL, programmable as NC/NOAlarm Out: 1 x Relay with NO/NC contactPTZ Control: By T erminal connector (RS485)DisplayLive Display: 1 or 4 or 9 (8ch)1 or 4 or 9 or 16 (16ch)Live Display Speed: 240 (8ch)/ 240 (16ch) NTSC, 200 (8ch)/ 200 (16ch) P ALOSD: ON/OFFOSD Navigation: USB Mouse, IR Remote Controller, Front Panel ControlsActivity Detection: 6 x 8 gridSensitivity Levels: 100System Control: USB Mouse, Front Panel Controls, Handheld Remote ControlFirmware Upgrade: Via USB deviceUser Authority: ADMIN/USER/GUESTRECORDINGVideo Compression: H.264Audio Compression: ADPCMRecording Speed & Resolution: 8/16 Channel: 240 fps (NTSC), 200 fps (P AL) @ 320 x 240 NTSC / 320 x 256 P AL120 fps (NTSC), 200 fps (P AL) @ 640 x 240 NTSC / 640 x 256 P AL60 fps (NTSC), 100 fps (P AL) @ 640 x 480 NTSC / 640 x 512 P ALRecording Resolution Setting: Programmable per cameraRecording Quality Control: 5 levelsImage Size: 8.51 Kbyte (640x480,640x512), 11.2 Kbyte (640x240, 640x256) 14.13 Kbyte (320x240, 320x256)Recording Modes: Continuous, motion, alarmPre Recording: Max. 10 secondsPost Recording: Max. 255 secondsAlarm Recording: Programmable per cameraReliability: W atch-Dog, Auto-recovery after power failure PLA YBACKPlayback Display: 1,4,9 (8ch), 1,4,9,16 (16ch)Playback Speed: V ariable up to 60xPlayback Players: Apple QuickTime PlayerSearch: By time & eventSTORAGE & ARCHIVEStorage: Up to 1 HDD’s (SA T A)Maximum Capacity: Up to 2TBBackup Media: USB Flash Drive (max 4GB)Backup File Format: MOV file (Codec included)Bookmark Archiving: SupportedCONNECTIVITYEasy Connect: 1. Y oics Enabled (registration required)2. Lorex Auto Port Forward WizardSoftware: W eb browserSupported Operating Systems: Windows™ XP, Vista, 7 and Apple Mac (via Safaribrowser)Browsers: Internet Explorer, SafariEmail Notification: Snap Shot attachment (8/16ch)Mobile Connectivity: iPad™ , iPhone™ - 3.1.2 and above, Blackberry™ -(supported model numbers: 9700, 9800, 9000, 8900),Android (version 1.5 & above), Windows Mobile™ smartphones – 6.0 and above touch screen smart phones DDNS: Free Lorex DDNSW eb Server Port: Programmable by UserNetwork Protocol: LAN, DHCP, Dynamic IP, DDNSNetwork Interface: 10/100-Base-TX, RJ-45Network Speed Control: 10 levels (28.8Kb ~ 1.5MB)/sec.GENERALPower Consumption: Approx. 30 wattsSupply V oltage: 120V AC-240V AC, 12VDC, 2.5A(4ch) 3A(8/16ch), 50/60Hz Unit Dimensions (W x D x H): 11.6” x 7.2” x 1.67”290mm x 180mm x 41.8mmUnit W eight: 3.2±0.22 lbs / 1.45±0.1 kg (8/16ch)Operating T emperature: 41° ~ 104° F / 5° ~ 40° CHumidity: 10 ~ 75% NCDVR, TOUCH MONITOR & CAMERA SPECIFICATIONS DVR:Image Sensor: 1/4” Advanced ColorVideo Format/Pixels: NTSC: 656(H) x 492 (V)Horizontal Resolution: 480 TVLSync. & Scan. Systems: Internal; 2:1 InterlaceS/N Ratio: > 48dBIris & Shutter Speed AES; 1/60 - 1/50,000 sec.Minimum Illumination: ***********(IRoff),0LUX(IRLEDson) Video Output: Comp. 1.0 Vpp @ 75ohmLens/Lens Mount: 5.0mm F2.8/FixedFOV (diagonal): 50 degreesT ermination: Video: BNC Female, Power: Barrel FemaleIR / Night Vision Range: 30 IR LEDs/850nm/75’ (23m)Power Requirement: 12V DV ±10%Power Consumption: 220 mA or 3W maxOperating T emp.: 14°F ~ 122°F (-10°C ~ 50°C)W eight (with stand): 0.66 lb / 0.3 kgDimensions L x W x H(with sunshade): 5.1” x 3” x 5.1” / 130mm x 75mm x 129mm LCD Panel Size: 21.5” / 54.61 cmDCR: 10000:1 (typical)Viewing Angle: Horizontal 170°, vertical 160° (typical) Response Time: 5 ms (typical)Brightness: 265 cd/m2 (typical)Input Signal: Analog signal (D-sub); digital signal (DVI) Display Color: 16.7 M colorsFrequency: 24 ~ 83 kHz Horizontal, 50 ~ 76 Hz V ertical Optimum Graphic Resolution: 1920 x 1080 (60Hz)Max Pixel Clock: 180 MHZTilt: -5° ~ 20°Audio Output: 1W X 2Power Supply: AC: 100-240V ~ 50-60Hz;Power Consumption: Display mode: Max 48W; LED color: Blue Sleeping mode: Less than 1W, LED color: OrangeSize (W x H x D): 20” x 15.8” x 7.9” / 507mm x 402 mm x 200 mm W eight: 11lbs / 5 KgEnvironmental conditions: Operating temperature/humidity: 5 ~ 35°C,Relative humidity: 10-85%CAMERA (CVC6996):21.5” TOUCH SCREEN LCD MONITOR:MODELCONFIGURATIONPACKAGEW x D x H in & mmWEIGHTCUBEUPC CodeLH38410T228 ch Edge+ DVR x 4 (480) TVL Cameras x 1TB HDD x 21.5” Touch Monitor Retail English 658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb0.09786 CBM / 3.49486 CBF7-78597-38410-9LH38410T22F 8 ch Edge+ DVR x 4 (480) TVL Cameras x 1TB HDD x 21.5” Touch Monitor Retail Universal 658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-38411-6LH328501C4T228 ch Edge+ DVR x 4(480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorRetail English658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32806-6LH3281001C4T228 ch Edge+ DVR x 4(480) TVL Cameras x 1TB HDD x 21.5” Touch MonitorRetail English658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32817-2LH328501C4T22FMX8 ch Edge+ DVR x 4(480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorRetail Universal658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32806-6LH328501C4T22B 8 ch Edge+ DVR x 4(480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32805-9LH3281001C4T22B 8 ch Edge+ DVR x 4(480) TVL Cameras x 1 TB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”13.8 kg/30.5 lb 0.09786 CBM / 3.49486 CBF 7-78597-32815-8LH318501C8T22B 8 ch Edge DVR x 8 (480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”15.9 kg/35.1 lb 0.1329 CBM / 4.692 CBF 7-78597-31812-8LH328501C8T22B 8 ch Edge+ DVR x 8(480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”15.9 kg/35.1 lb 0.1329 CBM / 4.692 CBF 7-78597-32809-7LH3281001C8T22B 8 ch Edge+ DVR x 8 (480) TVL Cameras x 1TB HDD x 21.5” Touch Monitor Brown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”15.9 kg/35.1 lb 0.1329 CBM / 4.692 CBF 7-78597-32816-5LH326501C8T22B 16 ch Edge+ DVR x 8 (480) TVL Cameras x 500 GB HDD x 21.5” Touch MonitorBrown 650mm x 365mm x 560mm/ 25.6” x 14.4” x 22.2”15.9 kg/35.1 lb 0.1329 CBM / 4.692 CBF 7-78597-32606-2LH3261001C8T22B 16 ch Edge+ DVR x 8 (480) TVL Cameras x 1 TB HDD x 21.5” Touch MonitorBrown 658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”15.9 kg/35.1 lb 0.09786 CBM / 3.49486 CBF 7-78597-32611-6LH36810T22B 16 ch Edge+ DVR x 8 (480) TVL Cameras x 1TB HDD x 21.5” Touch MonitorBrown 658mm x 320mm x 470mm/ 25.9” x 12.6” x 18.5”15.9 kg/35.1 lb 0.09786 CBM / 3.49486 CBF 7-78597-32610-9LH361610T22B 16 ch Edge+ DVR x 16 (480) TVL Cameras x 1TB HDD x 21.5” Touch MonitorBrown 622mm x 495mm x 444mm/ 24.5” x 19.5” x 17.5”23.3 kg/51.5 lb 0.136770 CBM / 4.83 CBF 7-78597-32614-7Includes 8 or 16 Channel DVR, HDD Pre-Installed, Remote Control & “Flex” IR controller, Power adaptor for DVR, Mouse, Ethernet Cable, DVI to VGA Converter, 4 or 8 x Cameras, 4 or 8 x Camera Stands, 4 or 8 x 60ft BNC Extension Cables, 1 or 2 x 4 in 1 camera power adaptors, 2 screws (for key-hole style VESA mounting), 21.5” LCD Touch Screen Monitor, power cord for Monitor, audio cable, USB cable, VGA cable, DVI cable.© 2011 Lorex Technology Inc.As our product is subject to continuous improvement, Lorex T echnology & subsidiaries reserve the right to modify product design, specifications & prices without notice and3700 Koppers StreetBaltimore, Maryland 21227,Lorex Technology Inc.250 Royal Crest CourtMarkham, Ontario, CanadaBack Panel - 8 & 16 Channel DVRsPRODUCT INFORMATIONProduct Information:。
ILUKITSUSPVER360 垂直悬挂套件用户手册说明书
_22_04 KIT DE SUSPENSIÓN VERTICAL PARA TIRA DE LED TIPO NEON MODELOILUKITSUSPVER360MANUAL DE INSTRUCCIONES Y ESPECIFICACIONESPOR FAVOR LEER EL MANUAL ANTES DE USAR EL PRODUCTO(DEPENDIENDO MODELO).Kit de suspensión vertical para tira de LED tipo NEON, aluminio acabado natural. Incluye: 1 soporte superior, 1 casquillo inferior, cable de acero ajustable de 0 a 95 cm y accesorios. (El tubo de policarbonato se vende por separado 1m y 2m largo).NOTA: LAS CARACTERÍSTICAS TÉCNICAS Y ELÉCTRICAS FAVOR DE CONSULTAREN LA ETIQUETA DE PRODUCTO.(Características dependiendo modelo).Identifique los componentes del Kit:Para armar luminarios suspendidos verticales de 1m de largo:Para armar luminarios suspendidos verticales de 2m de largo:Notas:-Antes de fijar la tira de LEDs, se debe limpiar perfectamente la superficie donde instalará, asegurandose que quede libre de polvo, grasa y suciedad.-No use thiner o sustancias que puedan dañar la cubierta de la tira de LEDs.-Este producto debe ser instalado por personal calificado.-No haga dobleces pronunciados ni pise la tira de LEDs.-Consulte el manual de la fuente de poder a utilizar.-En caso de requerir alargar el cable de alimentación de la tira use cable del calibre adecuado dependiendo del consumo total de la tira y aisle correctamente usando cinta masilla y cinta vulcanizada para evitar filtraciones de humedad a través de los empalmes.-Evite perforar o dañar la cubierta de la tira de LEDs.-No conecte más de 5 m continuos. Al conectar un tramo de 5m se recomienta alimentar por ambos extremos para asegurar un brillo uniforme.-El uso de esta tira de LEDs en circuitos con ruido eléctrico generado por aparatos como motores, elevadores o generadores de electricidad entre otros puede disminuir su vida útil. El sello incorrecto en las uniones, cableado o terminaciones de tramos de tira puede provocar filtraciones de humedad y daño prematuro.-No utilice objetos diferentes a las grapas de fijación para instalar la tira.-No doble la tira en ángulos rectos ya que puede dañarse.No observar y cumplir las recomendaciones descritas en este manual puede ocasionar pérdida de garantíaPara calcular la fuente de poder adecuada, considere el que el voltaje de alimentación de la tira debe ser igual al voltaje de salida de la fuente. Para calcular la potencia de la fuente multiplique el consumo por metro por la cantidad de metros a utilizar. Siempre use las fuentes de poder a máximo el 80% de su potencia máxima (vea el manual de operación de la fuente a utilizar).PÓLIZA DE GARANTÍAMarca:Modelo:Importador: Ilumileds S.A. de C.V. Calz. San Isidro No. 97 Int. 2-2, Col. San Francisco Tetecala, Azcapotzalco, Ciudad de México, México, C.P. 02730. Tel.: (55)52072553Ilumileds S.A. de C.V. garantiza este producto por 1 año a partir de la fecha de compra en todas y cada una de sus partes y componentes contra cualquier defecto de los materiales y/o mano de obra empleados en su fabricación, sin costo para el consumidor.Ilumileds, S.A. de C.V. cubrirá los gastos de transportación del producto para lograr el cumplimiento de la garantía dentro de su red de servicio. Para hacer efectiva la garantía presente el producto acompañado de la póliza de garantía correspondiente debidamente sellada por el establecimiento que lo vendió, o la factura, o recibo o comprobante, en el que consten los datos específicos del producto objeto de la compraventa. El establecimiento en donde el consumidor puede hacer efectiva la garantía, así como adquirir las partes, componentes, consumibles y accesorios: es con el distribuidor autorizado donde el producto fue adquirido o directamente en nuestro centro de servicio ILUMILEDS ubicado en Callejón de Atenco No. 5, Col. San Martín Xochinahuac, Azcapotzalco, Ciudad de México, México, C.P. 02120.Tel. (55)26264751El tiempo de reparación de producto no será mayor a 30 días en ningún caso.Excepciones:La presente garantía no será válida en los siguientes casos:a) Cuando el producto hubiese sido utilizado en condiciones distintas a las normales.b) Cuando el producto no hubiese sido operado de acuerdo con el instructivo de uso que se le acompaña.c) Cuando el producto hubiese sido alterado o reparado por personas no autorizadas por el importador Ilumileds, S.A. de C.V.Fecha de compra:___________________________________________。
Micrel, Inc. MIC2777双微功耗低压监控器说明书
November 2005 1 MIC2777Dual Micro-Power Low Voltage SupervisorGeneral DescriptionThe MIC2777 is a dual power supply supervisor that provides under-voltage monitoring, manual reset capability, and power-on reset generation in a compact 5-pin SOT package. Fea-tures include two under-voltage detectors, one fixed and one adjustable, and both active-high and active-low reset outputs. One under-voltage detector compares V DD against a fixed threshold. Ten factory-programmed thresholds are available. The other under-voltage detector is user-adjustable.The reset outputs are asserted for no less than 140ms at power-on and any time V DD or the input voltage drops below the corresponding reference voltage. They remain asserted for the timeout period after the input voltage and V DD sub-sequently rise back above the threshold boundaries. A reset can be generated at any time by pulling down on the adjust-able input. Hysteresis is included to prevent chattering due to noise. Typical supply current is a low 3.5µA.Typical ApplicationTypical ApplicationFeatures• Monitors two independent power supplies for under-volt-age conditions• One fixed and one user adjustable input • 1.5% theshold accuracy• Choice of factory-programmed thresholds• User-adjustable input can monitor supplies as low as 0.3V• Generates 140ms (minimum) power-on RESET pulse • Manual reset capability• Both active-high and active-low RESET outputs • Input may be pulled above V DD (abs. max.)• /RST output valid down to 1.2V• Ultra-low supply current, 3.5µA typical • Rejects brief input transients • IttyBitty™ 5-pin SOT-23 packageApplications• Monitoring processor, ASIC, or FPGA core and I/O volt-ages• Computer systems • PDAs, hand-held PCs • Embedded controllers• Telecommunications systems • Power supplies• Wireless / Cellular systems • Networking hardwareMicrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • IttyBitty™ is a trademark of Micrel, Inc.Ordering InformationPart NumberJunction Tem. RangePackage StandardMarking Pb-FreeMarking MIC2777-XXBM5UNXXMIC2777-XXYM5UNXX–40ºC to +85ºCSOT-23-5MIC2777 Micrel, Inc.MIC2777 2 November 2005Pin ConfigurationVDDIN SOT-23-5 (M5)Standard Voltage Options*Voltage TypicalNominal Threshold Code Application (V DD )Voltage (V TH )46 5.0V ±5% 4.68 44 5.0V ±10% 4.43 31 3.3V ±5% 3.09 29 3.3V ±10% 2.93 28 3.0V ±5% 2.81 26 2.85V ±5% 2.67 25 2.70V ±5% 2.53 23 2.5V ±5% 2.34 22 2.4V ±5% 2.25171.8V ±5%1.69*There are ten standard versions available with an order increment of 3000 pieces. Samples of standard versions are normally available from stock. Contact factory for information on non-standard versions. Available in tape-and-reel only.Pin DescriptionPin NumberPin Name Pin Function1/RSTDigital (Output): Asserted low whenever V IN or V DD falls below the reference voltage. It will remain asserted for no less than 140ms after V IN and V DD return above the threshold limits. 2 GND Ground3RSTDigital (Output): Asserted high whenever V IN or V DD falls below the refer-ence voltage. It will remain asserted for no less than 140ms after V IN and V DD return within above the threshold limit.4 INAnalog (Input): The voltage on this pin is compared to the internal 300mV reference. An undervoltage condition will trigger a reset sequence. Manual reset capability can be achieved by adding a switch between this pin and ground.5 VDDAnalog (Input): Power supply input for internal circuitry and input to the fixed voltage monitor: The voltage on this pin is compared against the internal voltage reference. An undervoltage condition will trigger a reset sequence.MIC2777 Micrel, Inc.Absolute Maximum Ratings (Note 1)Supply Voltage (V DD) .......................................–0.3V to +7V Input Voltage (V IN) ...........................................–0.3V to +7V RST, (/RST) Current ...................................................20mA Storage Temperature (T S) ........................–65°C to +150°C ESD Rating, Note 3....................................................1.5kV Operating Ratings (Note 2)Supply Voltage (V DD) ..................................+1.5V to +5.5V Input Voltage(V IN) .............................................................–0.3V to +6.0V Ambient Temperature Range (T A) ..............–40°C to +85°C Package Thermal Resistance (θJA) .......................256°C/WElectrical CharacteristicsNote 5; T A = +25°C, bold values indicate –40°C ≤ T A ≤ +85°C; unless notedSymbol Parameter Condition Min Typ Max Units I DD Supply Current V DD = V IN 3.5 µANote 5; /MR, RST, /RST openVDD VOLTAGE THRESHOLDUnder-Voltage Threshold On V DD V TH-1.5%V TH V TH+1.5%VV HYST Hysteresis Voltage 1 % IN, UNDER-VOLTAGE DECTECTOR INPUTV REF Under-Voltage Threshold 295300 305mV V HYST Hysteresis Voltage 3 mV I IN Input Current 5 pAT MIN ≤ T A ≤ T MAX 10nA RST, /RST OUTPUTSt PROP Propagation Delay V IN = (V REF(MAX) + 100mV) to 20 µsV IN = (V REF(MIN) – 100mV) orV DD = (V TH + 2.5%) to (V TH – 2.5%), V IN =V DDt RST Reset Pulse Width 140 280ms V OL RST or /RST Output Voltage Low I SINK = 1.6mA; 0.3VV DD ≥ 1.6VI SINK = 100µA; 0.3VV DD ≥ 1.2V,Note 4V OH RST or /RST Output Voltage High I SOURCE = 500µA; 0.8V DD VV DD ≥ 1.5VRST asserted, I SOURCE = 10µA; 0.8V DD VV DD ≥ 1.2V,Note 4Note 1. Exceeding the absolute maximum rating may damage the device.Note 2.The device is not guaranteed to function outside its operating rating.Note 3. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5k in series with 100pF.Note 4.V DD operating range is 1.5V to 5.5V. Output is guaranteed to be asserted down to V DD = 1.2V.Note 5.V DD equals the nominal “Typical Application (V DD)” as shown in “Standard Voltage Options Table.”November 2005 3 MIC2777MIC2777 Micrel, Inc.MIC2777 4 November 2005Propagation delays not shown for clarity.Note A. The MIC2777 ignores very brief transients.See “Applications Information” for details.MIC2777 Micrel, Inc. Functional DiagramFunctional DescriptionIN, Under-Voltage Detector InputThe voltage present at the IN pin is compared to the internal 300mV reference voltage. A reset is triggered if and when V IN falls below V REF. Typically, a resistor divider is used to scale the input voltage to be monitored such that V IN will fall below V REF as the voltage being monitored falls below the desired trip-point. Hysteresis is employed to prevent chattering due to noise. The comparator on the IN input is relatively immune to very brief negative-going transients.V DD InputThe V DD pin is both the power supply terminal and a monitored input voltage. The voltage at this pin is continually compared against the internal reference. The trip-point at which a reset occurs is factory programmed. A reset is triggered if and when V DD falls below the trip-point. Hysteresis is employed to prevent chattering due to noise. The comparator on the V DD input is relatively immune to very brief negative-going transients.RST, /RST Reset OutputTypically, the MIC2777 is used to monitor the power supplies of intelligent circuits such as microcontrollers and micropro-cessors. By connecting the appropriate reset output of a MIC2777 to the reset input of a µC or µP, the processor will be properly reset at power-on and during power-down and brown-out conditions.The reset outputs are asserted any time V DD or V IN drops below the corresponding threshold voltage. The reset outputs remain asserted for t RST(min) after V IN and/or V DD subsequent return above the threshold boundaries and/or /MR is released.A reset pulse is also generated at power-on.Manual ResetThe ability to initiate a reset via external logic or a manual switch is provided in addition to the MIC2777’s automatic supervisory functions. Typically, a momentary push-button switch is connected such that IN is shorted to ground when the switch contacts close. Assuming V DD and V IN are within tolerance when the switch is released, the reset outputs will be de-asserted no less than 140ms later. IN can also be driven by an open-drain or open-collector logic signal.November 2005 5 MIC2777MIC2777 Micrel, Inc.MIC2777 6 November 2005Application InformationProgramming the Voltage ThresholdReferring to the “Typical Application Circuit”, the voltage threshold on the IN pin is calculated as follows:V V R1R2R2TH REF =×+()where V REF = 0.300VIn order to provide the additional criteria needed to solve for the resistor values, the resistors can be selected such that the two resistors have a given total value, that is, R1 + R2 = R TOTAL . Imposing this condition on the resistor val-ues provides two equations that can be solved for the two unknown resistor values. A value such as 1MΩ for R TOTAL is a reasonable choice since it keeps quiescent current to a generally acceptable level while not causing any measurable errors due to input bias currents. The larger the resistors, the larger the potential errors due to input bias current (I IN ). The maximum recommended value of R TOTAL is 3MΩ.Applying this criteria and rearranging the V TH expression to solve for the resistor values gives:R2R V V TOTAL REF TH=()()R1 = R TOTAL – R2Application ExampleFigure 1 illustrates a hypothetical MIC2777-23 application in which the MIC2777-23 is used to monitor the core and I/O supplies of a high-performance CPU or DSP . The core supply, V CORE , in this example is 1.0V ±5%. The main power rail and I/O voltage, V I/O , is 2.5V ±5%. As shown in Figure 1, the MIC2777 is powered by V I/O . The minimum value of V I/O is 2.5V –5% = 2.375V; the maximum is 2.5V +5% = 2.625V. This is well within the MIC2777’s power supply range of 1.5V to 5.5V.Resistors R1 and R2 must be selected to correspond to the V CORE supply of 1.0V. The goal is to insure that the core supply voltage is adequate to insure proper operation, i.e., V CORE ≥ (1.0V –5%) = 0.950V. Because there is always a small degree of uncertainty due to the accuracy of the resis-tors, variations in the devices’ voltage reference, etc., the threshold will be set slightly below this value. The potential variation in the MIC2777’s input voltage reference (V REF ) is specified as ±1.5%. The resistors chosen will have their own tolerance specification. This example will assume the use of 1% accurate resistors. The potential worst-case error contri-bution due to input bias current can be calculated once the resistor values are chosen. If the guidelines above regarding the maximum total value of R1+R2 are followed, this error contribution will be very small thanks to the MIC2777’s very low input bias current.To summarize, the various potential error sources are: • Variation in V REF : specified at ±1.5%• Resistor tolerance: chosen by designer (typically ≤ ±1%)• Input bias current, I IN : calculated once resistor values are known, typically very smallTaking the various potential error sources into account, the threshold voltage will be set slightly below the minimum V CORE specification of 0.950V so that when the actual threshold voltage is at its maximum, it will not intrude into the normal operating range of V CORE . The target threshold voltage will be set as follows:Given that the total tolerance on V TH for the IN pin is [V REF tolerance] + [resistor tolerance] = ±1.5% + ±1% = ±2.5%, and V TH(max) = V CORE(min), then V CORE(min) = V TH + 2.5% V TH = 1.025 V TH ,therefore, solving for V TH results inV =V 1.025=0.9501.025=0.9268V TH CORE(min)Solving for R1 and R2 using this value for V TH and the equa-tions above yields: R1 = 676.3kΩ ≈ 673kΩ R2 = 323.7kΩ ≈ 324kΩThe resulting circuit is shown in Figure 1.Input Bias Current EffectsNow that the resistor values are known, it is possible to cal-culate the maximum potential error due to input bias current, I IN . As shown in the “Electrical Characteristics” table, the maximum value of I IN is 10nA. (Note that the typical value is a much smaller 5pA) The magnitude of the offset caused by I IN is given by: V ERROR = I IN(max) × (R1||R2) = V ERROR = ±1 × 10-8A × 2.189 ×105Ω = V ERROR = ±2.189 × 10-3V = V ERROR = ±2.189mV The typical error is about three orders of magnitude lower than this– close to one microvolt! Generally, the error due to input bias can be discounted. If it is to be taken into account, simply adjust the target threshold voltage downward by this amount and recalculate R1 and R2. The resulting value will be very close to optimum. If accuracy is more important than the quiescent current in theresistors, simply reduce the value of R TOTAL to minimize offset errors.November 2005 7 MIC2777MIC2777Micrel, Inc.Figure 1. MIC2777 Example DesignTransient responseThe MIC2777 is inherently immune to very short negative-going “glitches.” Very brief transients may exceed the voltage thresholds without tripping the output.As shown in Figure 2a and 2b, in general the narrower the transient, the deeper the threshold overdrive that will beignored by the MIC2777. The graph represents the typical allowable transient duration for a given amount of threshold overdrive that will not generate a reset.Figure 2a. Typical INPUT Transient ResponseRESET COMP. OVERDRIVE,V REF –V DD (mV)Typical VDDFigure 2b. Typical V DD Transient ResponseEnsuring Proper Operation at Low SupplyAt levels of V DD below 1.2V, the MIC2777’s /RST output cannot turn on sufficiently to produce a valid logic-low on /RST. In this situation, other circuits driven by /RST could be allowed to float, causing undesired operation. (In most cases, however, it is expected that the circuits driven by the MIC2777 will be similarly inoperative at V DD ≤ 1.2V.)If a given application requires that /RST be valid below V DD = 1.2V, this can be accomplished by adding a pull-down re-sistor to the /RST output. A value of 100kΩ is recommended as this is usually an acceptable compromise of quiescent current and pull-down current. The resistor’s value is not critical, however. See Figure 3.The statements above also apply to the MIC2777’s RST out-put. That is, to ensure valid RST signal levels at V DD <1.2V, a pull-up resistor (as opposed to a pull-down) should be added to the RST output. A value of 100kΩ is typical for thisapplication as well. See Figure 4.Figure 3. MIC2777 Valid /RST Below 1.2VFigure 4. MIC2777 Valid RST Below 1.2VMIC2777 Micrel, Inc. Package InformationSOT-23-5 (M5)MICREL INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USATEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB This information furnished by Micrel in this data sheet is believed to be accurate and reliable. However no responsibility is assumed by Micrel for its use.Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser's own risk and Purchaser agrees to fully indemnifyMicrel for any damages resulting from such use or sale.© 2000 Micrel, Inc.MIC2777 8 November 2005Mouser ElectronicsAuthorized DistributorClick to View Pricing, Inventory, Delivery & Lifecycle Information:M icrochip:MIC2777-26YM5 TR MIC2777-28YM5 TR MIC2777-29YM5 TR MIC2777-44YM5 TR MIC2777-44YM5-TRMIC2777-31YM5-TR MIC2777-28YM5-TR MIC2777-26YM5-TR MIC2777-17YM5-TR MIC2777-23YM5-TR MIC2777-25YM5-TR MIC2777-22YM5-TR MIC2777-29YM5-TR MIC2777-46YM5-TR。
洛雷克斯 LW2760 系列无线摄像头监控系统说明书
FEATURES:•7” LCD monitor / recorder 1•Weather resistant HD wireless cameras 2•Simple installation. No video cables required•Free iOS / Android apps for smartphones & tablets 3Specifications 1. Wireless cameras and monitor require a wired connection to a power outlet.2. Not intended for direct exposure to rain or snow. For outdoor applications, install under shelter protected from the elements.3. Requires a high speed Internet connection and a wired connection to a router (not included). An upload speed of 3Mbps is recommended for optimal video performance. Up to 3 devices may connect to the system at the same time. For the latest compatibility list check /support as new models become available in the market.4. Viewing and recording in 720p resolution should be limited to 2 cameras. For systems using up to 4 cameras, VGA resolution is recommended for optimal video performance. 720p resolution recordings and live view can only be viewed in HD using devices that support 720p (1280×720) or higher resolutions. Included monitor resolution is 800×480.5. Motion recording for a single camera based on VGA (640×480) recording resolution with 40 motion events per day and 30 second recording duration per event. Maximum recording time may vary based on the number of cameras that are recording, the amount of motion in the scene, and the size of the memory card used (8GB SD card included; 64GB supported).6. Stated IR illumination ranges are based on ideal conditions in typical outdoor night time ambient lighting and total darkness. Actual range and image clarity depends on installation location, viewing area and light reflection / absorption.7. Wireless cameras automatically reconnect with the receiver upon detecting low signal strength to optimize the wireless connection. Maximum wireless transmission range of 150ft (46m) indoors / 500ft (152m) outdoors. Actual range dependent upon building materials and other obstructions in the path of the wireless signal.All trademarks belong to their respective owners. No claim is made to the exclusive right to use the trademarks listed, other than the trademarks owned by Lorex Corporation. We reserve the right to change models, DisclaimersDimensionsCameraReceiver/MonitorImage Sensor 1/4” CMOS Image Sensor Supported Resolutions 720p (1280×720) @ 15fps VGA (640×480) @ 25fps Effective Pixels 1280 (W) × 720 (H)Minimum Illumination < 5 lux (IR On)> 30 lux (IR Off)AGC Auto AES Speed 1/30 (1/25) ~ 1/1,000s Night Vision Range 65ft (20m) / 45ft (14m)(5)PIR Range 16ft (5m)Lens / Lens Type 3.6mm F2.0 / Fixed Field of View (Horizontal) 58°Power Consumption Max. 500mA Power Supply 9V DC 600mA ±10%Environmental Rating Indoor & Outdoor (IP54 Rated)Operating Temperature 14° ~ 122°F / -10° ~ 50°C Dimensions (W × D × H) 3.2 × 8.0 × 4.7” / 81 × 203 × 119mm Weight 0.70lbs / 0.32kgDisplay 7” Diagonal LCD Resolution 800×480Receiving Sensitivity -88dBm Supported Resolutions 720p (1280×720) @ 15fps VGA (640×480) @ 25fps Power Consumption Max. 850mA Power Supply 5V DC 2A ±10%Environmental Rating Indoor Only Operating Temperature 32° ~ 104°F / 0° ~ 40°C Dimensions (W × D × H) 7.4 × 1.5 × 5.4” / 188 × 38 × 137mm Weight 0.90lbs / 0.40kgTransmission Frequency 2.4 ~ 2.4835 GHz Transmission Power 16dBm Data Rate 4 Mbps Unobstructed Wireless Range 500ft (152m) Outdoors / 150ft (46m) Indoors(6)Spread Spectrum FHSS Modulation G FSK Operating Humidity < 85% RHGeneralProduct InformationModel LW2762HConfiguration Wireless 720p Video Surveillance System PackageRetail Box Package Dimensions (W × D × H)14.6 × 10.6 × 3.9"370 × 268 × 100mm Package Weight 4.0lbs / 1.8kg Package Cube 0.4 cbf / 0.01 cbm UPC 6-95529-00673-4Contents1× 7" LCD Monitor, 2× Wireless 720p HD Cameras, 3×Power Adapters, 1× Ethernet Cable, 1× 8GB SD Card, Quick Setup Guides 7.4” / 188mm W5.4” / 137mm HModel LW2762HBConfiguration Wireless 720p Video Surveillance System PackageBrown Box Package Dimensions(W × D × H)14.6 × 10.6 × 3.9"370 × 268 × 100mm Package Weight 4.0lbs / 1.8kg Package Cube 0.4 cbf / 0.01 cbm UPC 6-95529-01159-2Contents1× 7" LCD Monitor, 2× Wireless 720p HD Cameras, 3×Power Adapters, 1× Ethernet Cable, 1× 8GB SD Card, Quick Setup Guides。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
元器件交易网MI - MegaModTMFamilyMilitary Chassis Mount DC-DC Converters 10 to 300W Single, Dual, Triple OutputsFeaturesInputs: 28, 155, 165 and 270Vdc Any output: 2 to 48Vdc Up to 13.5W/in3 High efficiency Size — 1- up half-size: 2.58" x 2.5" x 0.62" (65,5 x 63,5 x 15,7mm) Size — 1- up full-size: 4.9" x 2.5" x 0.62" (124,5 x 63,5 x 15,7mm) Size — 2- up half-size: 2.58" x 4.9" x 0.62" (65,5 x 124,5 x 15,7mm) Size — 2- up full-size: 4.9" x 4.9" x 0.62" (124,5 x 124,5 x 15,7mm) Size — 3- up half-size: 2.58" x 7.3" x 0.62" (65,5 x 185,4 x 15,7mm) Size — 3- up full-size: 4.9" x 7.3" x 0.62" (124,5 x 185,4 x 15,7mm)Product HighlightsVicor’s MI-MegaMod family of single, dual, and triple output DC-DC converters provide power system designers with costeffective, high-performance, offthe-shelf solutions to applications that might otherwise require a custom supply. Incorporating standard MI-200 or MI-J00 family converters in rugged, chassis mount packages, MegaMods can be ordered with single, dual, or triple outputs, having a combined output power of up to 300W. Totally isolated outputs eliminate efficiency penalties and output interaction problems.Remote sense ZVS/ZCS power architecture Low noise FM controlConfiguration ChartFull-Size MegaMods Single Output MI-L – MI-M – MI-N – Dual Output MI-P – MI-Q – Triple Output MI-R Number of Modules 1 2 3 2 3 350 – 100W 150 – 200W 300W 100 – 200W 200 – 300W – 150 – 300W4.9" x 2.5" x 0.62" 4.9" x 4.9" x 0.62" 4.9" x 7.3" x 0.62" 4.9" x 4.9" x 0.62" 4.9" x 7.3" x 0.62" 4.9" x 7.3" x 0.62"Half-Size MegaMods Single Output MI-LJ – Dual Output MI-PJ – Triple Output MI-RJ –10 – 50W 20 – 100W 30 – 150W2.58" x 2.5" x 0.62" 2.58" x 4.9" x 0.62" 2.58" x 7.3" x 0.62"1 2 3Input Voltage Nominal Range Transient2 =28Vdc 5 =155Vdc 6 =270Vdc 7 =165Vdc 18 – 50V (1) 60V 100 – 210V 230V 125 – 400V(2) 475V 100 – 310V (3)Output VoltageZ = 2V Y = 3.3V 0 = 5V X = 5.2V W= 5.5V V = 5.8V T = 6.5V R = 7.5V M = 10V 1 = 12V P = 13.8V 2 = 15V N = 18.5V 3 = 24V L = 28V J = 36V K = 40V 4 = 48VProduct Grade Full-SizeI = –40°C to +85°C M = –55°C to +85°CHalf-SizeI = –40°C to +100°C M = –55°C to +100°COutput Power/Current Full-Size Half-Size ≥5V <5V ≥5V <5VY X W V = 50W 10A A = 10W — = 75W 15A Z = 25W 5A = 100W 20A Y = 50W 10A = — 30AOutput Power/Current ≥5V <5VV U S = = = 150W 200W — 30A — 60AOutput Power/Current ≥5V <5VS P = = 300W — — 90A(1) (2)(3)16V operation at 75% load. These units rated at 75% load from 125 – 150Vin: Full-size – 5Vout @ 100W; 2Vout and 3.3Vout @ 30A Half-Size – 5Vout @ 50W; 2V and 3.3V @ 10A. For use with Vicor’s MI-AIMMI-MegaMod 10/021 of 4元器件交易网SpecificationsFull-Size(At TBP = 25°C, nominal line and 75% load, unless otherwise specified)PARAMETER Input Characteristics Inrush charge Input reflected ripple current – pp: Input ripple rejection 120 x 10 10-6MINTYPMAX 200 x 10-6UNITS Coulombs % Iin dB dB Watts % Vnom % Vnom % Vnom % / °C %/1K hours mV % % Vnom Vdc % Vnom % Inom % Inom Ohms Ohms Vdc Vdc mA Vrms Vrms VrmsNOTES Nominal line, per module Nominal line, full load 120Hz, nominal line 2400Hz, nominal line Per moduleVin (Vout) Vin 20 + 20Log (Vout) 30 + 20Log 1.35 0.5 0.05 0.2 0.01 0.02 80 0.75 2.0 1.0 0.2 0.5 0.02 150 1.5 110 135 125 130No load power dissipation Output Characteristics Setpoint accuracy Load/line regulation Load/line regulation Output temperature drift Long term drift Output ripple – p-p: ≤10V 12-48V Output voltage trimming(1) 50 Total remote sense compensation 0.5 OVP setpoint 115 Current limit 105 Short circuit current Control Pin Characteristics Gate out impedance Gate in impedance Gate in open circuit voltage Gate in low threshold Gate in low current Isolation Characteristics Isolation (input to output) Isolation (output to baseplate) Isolation (input to baseplate) Thermal Characteristics Efficiency Baseplate to chassis Thermal shutdown Mechanical Specifications Weight 1-up 2-up 3-up(1)LL to HL, 10% to FL LL to HL, NL to 10% Over rated temperature 20MHz bandwidth 20MHz bandwidth 0.25V max. neg. leg Recycle power Automatic restart12550 103 6.0 0.65 6.0 3,000 500 1,500 80-90 0.1 95Use open collector90105% °C/Watt °C9.0 (255) 1.2 (525) 1.7 (780)ounces (grams) pounds (grams) pounds (grams)10V, 12V, and 15V outputs, standard trim range ±10%. Consult factory for wider trim range.MI-MegaMod 10/022 of 4元器件交易网SpecificationsHalf-Size(At TBP = 25°C, nominal line and 75% load, unless otherwise specified)PARAMETER Input Characteristics Inrush charge Input reflected ripple current – pp: Input ripple rejection 60 x 10 10-6MINTYPMAX 100 x 10-6UNITS Coulombs % Iin dB dB Watts % Vnom % Vnom % Vnom % / °C %/1K hours mV % % Vnom Vdc % Inom Ohms Ohms Vdc Vdc mA Vrms Vrms VrmsNOTES Nominal line, per module Nominal line, full load 120Hz, nominal line 2400Hz, nominal line Per moduleVin (Vout) Vin 20 + 20Log ( Vout) 30 + 20Log 1.35 0.5 0.05 0.2 0.01 0.02 80 0.75 2.0 1.0 0.2 0.5 0.02 150 1.5 110 125 50 103 6.0 0.65 6.0 3,000 500 1,500 80-90 0.1No load power dissipation Output Characteristics Setpoint accuracy Load/line regulation Load/line regulation Output temperature drift Long term drift Output ripple – p-p: ≤10V 12-48V Output voltage trimming(1) 50 Total remote sense compensation 0.5 Current limit 105 Control Pin Characteristics Gate out impedance Gate in impedance Gate in open circuit voltage Gate in low threshold Gate in low current Isolation Characteristics Isolation (input to output) Isolation (output to baseplate) Isolation (input to baseplate) Thermal Characteristics Efficiency Baseplate to chassis Mechanical Specifications Weight 1-up 2-up 3-up(1)LL to HL, 10% to FL LL to HL, NL to 10% Over rated temperature 20MHz bandwidth 20MHz bandwidth 0.25V max. neg. leg Automatic restartUse open collector% °C/Watt4.5 (127) 8.8 (250) 13.3 (377)ounces (grams) ounces (grams) ounces (grams)10V, 12V, and 15V outputs, standard trim range ±10%. Consult factory for wider trim range.MI-MegaMod 10/023 of 4元器件交易网Mechanical DrawingInputsHALF-SIZE 2.58 MODULE: (65,5) 4.90 TYP. (124,5)SER. NO.Outputs0.53 TYP. (13,5)Side view (all models)1-UpL- and LJ-Seriesø.150 (ø3,81) THRU C'BORE ø.250 (ø6,35) X .170 (4,32) DEEP A 2MEGA MODULE DC-DC CONVERTERL- and LJ-Series0.16 (4,1) 1 2.18 (55,4) 4 0.19 TYP. (4,8) TOP VIEW 2.76 TYP. (70,1) 5.52 TYP. (140,2)B C D EBaseplate (TYP.) 2.50 TYP. (63,5)30.62 TYP. (16.0) HALF-SIZE MODULE: 3.20 (81,3)HALF-SIZE 1.60 MODULE: (40,6)2-Up1P- and PJ-Series0.19 (4,8) 1M-SeriesM-SeriesP- and PJ-SeriesAA B C D E F G H 4.90 (124,5) TYP.2 32.26 (57,4)2MEGA MODULETMBDC-DC CONVERTER3C D5 6 42.26 (57,4)5 4 E 0.25 (6,4) TYP.J KTOP VIEW3-UpR- and RJ-Series1 2 3 1 1 2 3 2.26 (57,4) 3 D F 5 6 6.94 (176,3) E F 7 8 4 7 8 4 TOP VIEW 2.26 (57,4) 4 7 E G H J K P Q M N G H J K L 7.32 TYP. (185,9) 2MEGA MODULE DC-DC CONVERTERQ-Series0.19 (4,8)N-SeriesN-SeriesA B CQ-SeriesR- and RJ-SeriesA B C D D BA C EInputs1 2 3 4 –Input Gate Out #1 Gate In #1 +Input 5 6 7 8 Gate Gate Gate Gate Out #2 In #2 Out #3 In #3Outputs Output #1 A –Output B –Sense C Trim D +Sense E +Output Output #2 F –Output G –Sense H Trim J +Sense K +Output Output #3 L –Output M –Sense N Trim P +Sense Q +OutputMounting Information Use #6 machine hardware torqued to 5-7 in-lbs.MI-MegaMod 10/024 of 4。