UTC78041C V1.0
Tron 产品说明书
COMPASS01-0226-03GYROTRAC SYSTEM FOC-WO 1.00SET21F COMPASS01-0226-03GYROTRAC SYSTEM FOC-WO 1.00SET PHLIA WIND DATA SYSTEM05106RM YOUNG WIND MONITOR - MA P221-1334 1.00SET XXX WIND DATA SYSTEM05108RM YOUNG WIND MONITOR HD P222-14537.00SET19F WIND DATA SYSTEM06206-27RM YOUNG MARINE WIND TRACKER -110/220VAC P222-1453 3.00SET19F WIND DATA SYSTEM06206-27RM YOUNG MARINE WIND TRACKER -110/220VAC SHAC31 P221-0710 1.00SET SHAC 101700TRON TR30 AIR EMERGENCY VHF AM RADIO P222-0087 1.00SET19F103170EPRIB - TRON 60AIS WITH FLOAT FREE BRACKET P223-0001 4.00SET19F103170EPRIB - TRON 60AIS WITH FLOAT FREE BRACKET P222-0670 1.00SET SHAT1305118DM100 VDR G2P221-1683*3 1.00SET BOND710S-00607SAFESEA S100 SART WITH MOUNTING POLE P222-00748.00SET PHLIA EPIRB8305083050 TRON 40S MKII (WITHOUT BRACKET)FOC-P218-2570 1.00SET19F EPIRB83310TRON 60S EPIRB W/FF BRACKET P222-0776 1.00SET19F EPIRB83310TRON 60S EPIRB W/FF BRACKET P222-0331 1.00SET GZLF EPIRB83310TRON 60S EPIRB W/FF BRACKET P222-0776 2.00SET SHAT EPIRB83310TRON 60S EPIRB W/FF BRACKET P222-0776 1.00SET XXX19 83330TRON 60GPS EPIRB WITH FLOAT FREE BRACKET P222-07767.00SET19F83330TRON 60GPS EPIRB WITH FLOAT FREE BRACKET P222-0776 1.00SET SHAT VHF / UHF87950P221-0958 1.00SET19F VHF / UHF87950P222-067039.00SET19F VHF / UHF87950SHAC26 P221-0014 1.00SET SHAC VHF / UHF87950P221-0631 1.00SET SHAT A45P & E ANEMOMETER P221-1367 1.00SET PANYUAC3161200407222A-00500 SAILOR 7222 VHF DSC Class A P222-0139 3.00SET19FAC3496400C1-70-A00S INTELLIAN C700 CERTUS TERMINAL P221-1117 1.00SET PHLIA AUTOPILOT ALPHAPILOT-IU*AUTOPILOT (CONTACT O/P) CONNECTION TERMINAL (LOCAL MADE)FOC 4.00SET19F GYROCOMPASS CMZ-900B2GYRO COMPASS P222-1289 1.00SET19F ECHO SOUNDER CVS-126KODEN ECHO SOUNDER (600W, 200KHZ, DC24V OPERATION)P221-0821 1.00SET PHLIA ECHO SOUNDER CVS-126KODEN ECHO SOUNDER (600W, 200KHZ, DC24V OPERATION)P222-0118 3.00SET PHLIA ECHO SOUNDER CVS-126KODEN ECHO SOUNDER (600W, 200KHZ, DC24V OPERATION)P222-090520.00SET PHLIA ECHO SOUNDER CVS-128KODEN ECHO SOUNDER(8.4-INCH COLOR LCD)P222-0905 2.00SET19F ECHO SOUNDER CVS-128KODEN ECHO SOUNDER(8.4-INCH COLOR LCD)P222-0905 1.00SET PHLIA ECHO SOUNDER CVS-FX2KODEN DIGITAL BROADBAND ECHO SOUNDER C/W TRANSDUCER & STANDARD ACCESSORIES FOC-WO-P215-1160 1.00SET PHLIA NAVTEX DPU-414-50B-E PRINTER P222-0996 1.00SET DL NAVTEX DPU-414-50B-E PRINTER SHAC21 P219-0539 1.00SET DL NAVTEX DPU-414-50B-E PRINTER SHAC21 P219-0538 1.00SET FZ NAVTEX DPU-414-50B-E PRINTER P219-0538 1.00SET PANYU NAVTEX DPU-414-50B-E PRINTER CONSIGNMENT 1.00SET PHLIA NAVTEX DPU-414-50B-E PRINTER P221-0068 2.00SET PHLIA NAVTEX DPU-414-50B-E PRINTER P222-1020 1.00SET SHAI DT885FF ENTEL FIRE FIGHTER RADIO (UHF), ATEX IIB P221-014712.00SET19FDT885FF ENTEL FIRE FIGHTER RADIO (UHF), ATEX IIB ENT-P221-0011 6.00SET SHACDT985FF ENTEL FIRE FIGHTER RADIO (UHF), ATEX IIC P221-14248.00SET19FDT985FF ENTEL FIRE FIGHTER RADIO (UHF), ATEX IIC P222-118720.00SET19F VHF / UHF DX482ENTEL UHF P218-1451 1.00SET19F VHF / UHF DX482ENTEL UHF P218-1451 2.00SET SHAT VHF / UHF DX482ENTEL UHF P218-1451*2 3.00SET SHAT DX585M-IS UL913 INTRINSICALLY SAFE UFH (NON EU)P222-11417.00SET19F FAX / WEATHER FAX FAX-236BROTHER FAX MACHINE ( AC 220V )FOC-WO-P211-0201 1.00SET21F FAX / WEATHER FAX FAX-236BROTHER FAX MACHINE ( AC 220V )FOC-WO-P211-0201 1.00SET PHLIA VHF / UHF FM8800S*VHF (SECOND HAND)FOC-WO-P215-0960 1.00SET SGP GC80SIMRAD GYRO COMPASS P221-1563 1.00SET PHLIA GPS / DGPS GP-170GPS P222-0649 1.00SET PHLIA PUBLIC ADDRESSER HPA-7300PUBLIC ADDRESSER/ TALK-BACK SYSTEM CONSIGNMENT-PGH270210.70SET PANYU PUBLIC ADDRESSER HPA-9200PUBLIC ADDRESSER/ TALK BACK SYSTEM CONSIGNMENT-PGH27021 1.00SET PANYU VHF / UHF HT544ENTEL HANDHELD VHF (I.S. TYPE) WITH LCD DISPLAY ENT-P220-0003 2.00SET SHAC VHF / UHF HT583(RED-BEZEL)ENTEL I.S. UHF P221-0147 4.00SET19F VHF / UHF HT583(RED-BEZEL)ENTEL I.S. UHF P221-106117.00SET19F VHF / UHF HT583(RED-BEZEL)ENTEL I.S. UHF P221-1061 3.00SET SHAT VHF / UHF HT649-GMDSS/P2ENTEL 2-WAY VHF P222-163411.00SET19F VHF / UHF HT649-GMDSS/P2ENTEL 2-WAY VHF P222-1634 6.00SET SHAT VHF / UHF HT782UHF P221-1424 1.00SET19F VHF / UHF HT782UHF ENT-P220-0003 2.00SET SHAC VHF / UHF HT883ENTEL I.S. UHF P218-12858.00SET19F VHF / UHF HT883ENTEL I.S. UHF ENT-P220-0003 1.00SET SHAC VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF P218-1201 6.00SET13F VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF P218-0235 4.00SET19F VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF P218-0699 4.00SET19F VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF ENT-P220-0003 6.00SET SHAC VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF P218-0235 1.00SET SHATVHF / UHF HT982ENTEL I.S. UHF P220-0104 4.00SET19F TELEPHONE HX-26AUTO EXCHANGE TELEPHONE SYSTEM CONSIGNMENT-PGH27021 1.00SET PANYU TELEPHONE HX-72AUTO-TELEPHONE SYSTEM CONSIGNMENT-PGH27021 1.00SET PANYU ECDIS JAN-2000JRC ECDIS FOC-WO-P216-0876 1.00SET PHLIA NECST JAN-470-4ANN NECST CONSIGNMENT 1.00SET PHLIA JAN-5203-26D ROUTE PLANNING SYSTEM, 26", DESK TOP TYPE P220-1749 2.00SET19F ECDIS JAN-701B*ECDIS (SECOND HAND)FOC-WO-P213-1313*10.90SET SHAT FAX / WEATHER FAX JAX-90*WEATHER FAX (SECOND HAND)FOC-WO-P213-1313 1.00SET SGP VDR SVDR JCY-1850*JRC SIMPLIFIED VOYAGE DATA RECORDER (SECOND HAND)FOC-WO-P215-0960 2.00SET SGP ECHO SOUNDER JFC-7050-W/OTD FISH FINDER (WITHOUT TRANSDUCER)FOC-WO-P215-1346 1.00SET PHLIA ECHO SOUNDER JFE-400-25ECHO SOUNDER WITH 200KHZ + 50KHZ DUAL TRANSDUCER (BB TYPE)P222-0682 1.00SET19F ECHO SOUNDER JFE-570S*NAVIGATION ECHO SOUNDER (SECOND HAND)FOC-WO-P213-1313 1.00SET SGP ECHO SOUNDER JFE-680JRC ECHO SOUNDER (WITHOUT TRANSDUCER)P221-0849 1.00SET19F AIS JHS-183AUTOMATIC IDENTIFICATION SYSTEM (AIS)P221-0837 1.00SET19F VHF / UHF JHS-32A*JRC VHF (SECOND HAND)FOC-WO-P213-1313 1.00SET PHLIA VHF / UHF JHS-32A*JRC VHF (SECOND HAND)FOC-WO-P215-0960*10.90SET SGP VHF / UHF JHS-32A*JRC VHF (SECOND HAND)FOC-WO-P215-0960 1.00SET SGP VHF / UHF JHS-32B*VHF/FM RADIOTELEPHONE (SECOND HAND)CONSIGNMENT 1.00SET PHLIA VHF / UHF JHS-7 2 WAY VHF RADIOTELEPHONE P219-1575*1 1.00SET19F GPS / DGPS JLR-21GPS COMPASS P222-0030 1.00SET19F GPS / DGPS JLR-4340GPS RECEIVER GPS-124 (WITH 15M CABLE)P218-0312*2 1.00SET19F GPS / DGPS JLR-7700MKII*GPS NAVIGATOR (SECOND HAND)FOC-WO-P215-0960 1.00SET SGP RADAR JMA-3336RADAR - X-BAND 6KW, 3.9FT OPEN SCANNER 10.4" DISPLAY P222-0318 1.00SET PHLIA JMA-3404JRC MARINE RADAR X-BAND, 4KW DOME SCANNER, 12/24VDC FOC-WO-P220-0946 3.00SET PHLIAJMA-3406JRC MARINE RADAR X-BAND, 6KW OPEN SCANNER, 12/24VDC P220-0946 1.00SET PHLIA RADAR JMR-9225-6XC X-BAND COLOR RADAR, 6FT ANTENNA OUTPUT POWER: 25KW STAND-ALONE TYPE P222-0744 1.00SET21F RADAR JMR-9225-6XC X-BAND COLOR RADAR, 6FT ANTENNA OUTPUT POWER: 25KW STAND-ALONE TYPE P222-0744 1.00SET BOND RADAR JMR-9230-SC S-BAND COLOR RADAR, 12FT ANTENNA OUTPUT POWER: 30KW STAND-ALONE TYPE P222-06990.90SET21F RADAR JMR-9230-SC S-BAND COLOR RADAR, 12FT ANTENNA OUTPUT POWER: 30KW STAND-ALONE TYPE P222-0170 1.00SET BOND RADAR JMR-9230-SC S-BAND COLOR RADAR, 12FT ANTENNA OUTPUT POWER: 30KW STAND-ALONE TYPE P222-06990.10SET GD MF/HF RADIO JSB-196GM*150W MHF/HF SSB RADIOTELEPHONE (SECOND HAND)FOC-P215-0960*1 1.00SET SGP INMARSAT JUE-85*INMARSAT-C MARINE MOBILE EARTH STATION (SECOND HAND)FOC-WO-P215-09600.90SET SGP INMARSAT JUE-95SA INMARSAT MINI-C MARINE MOBILE EARTH STATION P222-0682 1.00SET19F AIS KAT-100KODEN AIS TRANSCEIVER (DC OPERATION)P218-19660.50SET PHLIA KAT-330KODEN AIS TRANSCEIVER P222-0118 1.00SET19FKAT-330KODEN AIS TRANSCEIVER P222-0118 2.00SET PHLIAKAT-330KODEN AIS TRANSCEIVER P222-0905 6.00SET PHLIA ECHO SOUNDER KDS-6000BB KODEN DIGITAL BROADBAND SEARCH LIGHT SONAR P222-1707 2.00PC1PHLIA GPS / DGPS KGP-915KODEN GPS GLONASS P222-0905 3.00SET19F GPS / DGPS KGP-915KODEN GPS GLONASS P221-0821 2.00SET PHLIA GPS / DGPS KGP-915KODEN GPS GLONASS P222-0905 2.00SET PHLIA GPS / DGPS KGP-922GPS NAVIGATOR P222-0118 1.00SET19F GPS / DGPS KGP-922GPS NAVIGATOR P222-0118 1.00SET PHLIA GPS / DGPS KTN-70A PLOTTER P216-1791 1.00PC1PHJUN GPS / DGPS KTN-70A PLOTTER P219-172215.00PC1PHLIA RADAR MDC-204010.4-INCH COLOR LCD MARINE RADAR FOC-WO-P220-0861 2.00PC1PHLIA RADAR MDC-7912P-6X-BAND RADAR P222-1023 2.00SET19F RADAR MDC-7912P-6X-BAND RADAR P222-1023 2.00SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P222-0905 3.00SET19F RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P220-0294*10.90SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P219-0298 1.00SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P222-0118 1.00SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P222-170712.00SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P222-090514.00SET PHLIA COMPASS MS-100MAGNETIC COMPASS A/D CONVERTOR FOC-WO-P210-0101 1.00SET21F COMPASS MS-100MAGNETIC COMPASS A/D CONVERTOR FOC-WO-P210-0261 2.00SET21F VHF / UHF NCM-1770-E CONTROLLER SHAC14 P219-1237*1 2.00SET SHAC NAVTEX NCR-333NAVTEX RECEIVER P222-1108 2.00SET19F NAVTEX NCR-333NAVTEX RECEIVER P219-1511*20.20SET PHLIA NAVTEX NCR-333NAVTEX RECEIVER P220-1728*10.80SET PHLIA NAVTEX NCR-333*NAVTEX RECEIVER (SECOND HAND)FOC-WO-P215-0960 2.00SET SGP NEB-2000NSR EPRIB WITH AIS P222-129515.00SET PHLIANEB-2000C NSR EPRIB P222-0737*10.90SET PHLIANEB-2000C NSR EPRIB P222-0737 1.00SET PHLIA VHF / UHF NKG-52*PRINTER (SECOND HAND)FOC-P215-0960 1.00PC1SGP NKG900A NKG-900 PRINTER P222-0682 1.00PC19FNKG900A NKG-900 PRINTER P222-04918.00PC19FNKG900A NKG-900 PRINTER P222-0144 1.00PC SHAT ECHO SOUNDER NKG-901PRINTER (FLUSH MOUNT)P222-0597 2.00PC119F ECHO SOUNDER NKG-91PRINTER (FLUSH MOUNT) REFER TO NKG-901FOC 1.00PC119FRADAR NRT-1000RADAR SART P222-0737 3.00SET PHLIA AIS NTE-183-E AIS TRANSPONDER SHAC30 P220-0605*1 1.00SET DL VHF / UHF NTE-770S-E VHF TRANSCEIVER SHAC13 P219-1237*1 2.00SET SHAC NVR-3000VHF P222-1386 2.00SET19F VDR SVDR NW-6000NETWAVE VDR P219-2455*5 1.00SET19F AUTOPILOT PR-8000*TOKIMEC AUTOPILOT (SECOND HAND)FOC-WO-P213-1313 1.00SET SGP AUTOPILOT PT900AWOCMZ900S AUTOPILOT (WITHOUT CMZ-900S)P218-1659*1 1.00SET21F AIS R4*AIS (SECOND HAND)FOC-P215-0960 2.00PC1SGP AUTOPILOT RFU ANSCHUTZ (FEEDBACK UNIT) WITH LINKAGE FOR NP60FOC 1.00SET19F AUTOPILOT RFU ANSCHUTZ (FEEDBACK UNIT) WITH LINKAGE FOR NP60FOC-P218-1009 1.00SET19F VHF / UHF RT5022*SAILOR RT5022 VHF DSC (2nd HAND)CONSIGNMENT 1.00SET SGP GYROCOMPASS TG-5000*TOKIMEC GYROCOMPASS (SECOND HAND)FOC-P215-0960 1.00SET SGP GYROCOMPASS TG-5000*TOKIMEC GYROCOMPASS (SECOND HAND)FOC-WO-P213-1313 1.00SET SGP VHF / UHF TLKR8PACKAGE C/W RECHARGABLE BATTERY, BATTERY CHARGER, EARBUD & USER MANUAL FOC-WO-P213-0004 2.00SET21F TRANSPONDER TRONSART20JOTRON RADAR TRANSPONDER P222-0087 1.00SET19F TRANSPONDER TRONSART20JOTRON RADAR TRANSPONDER P222-195530.00SET19F TRANSPONDER TRONSART20JOTRON RADAR TRANSPONDER P222-0087 2.00SET DL TRANSPONDER TRONSART20JOTRON RADAR TRANSPONDER P222-0087 2.00SET PANYU。
EverFocus 700TVL高分辨率白天 夜晚天气防护户外红外弹道摄像机操作说明书
Operation Instruction700TVL High Resolution Day / Night Weather Resistant Outdoor IR Bullet CameraE Z 632eEverFocusE V E RF O C U S E L E C T R O N I C S C O R P O R A T I O NOperation Instruction© 2011 EverFocus Electronics CorpPlease read this manual first for correct installation and operation. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice.All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the EverFocus Electronics Corporation.PRECAUTIONS1.Do not install the camera near electric or magnetic fields.Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices maydistort the video image or otherwise interfere with camera operation.2. Never disassemble the camera beyond the recommendations in this manual norintroduce materials other than those recommended herein. Improper disassembly or introduction of corrosive materials may result in equipment failure or other damage.3. Try to avoid facing the camera toward the sun.In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal circuits, as well as creating unbalanced illumination beyond the capability of thecamera to compensate.4. Keep the power cord away from water and other liquids and never touch the powercord with wet hands. Touching a wet power cord with your hands or touching the power cord with wet hands may result in electric shock.5. Never install the camera in areas exposed to oil, gas or solvents.Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.6. CleaningFor cameras with interchangeable lenses, do not touch the surface of the sensor directly with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean thesensor and the camera lens. Use a damp soft cloth to remove any dirt from the camerabody. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any part of the camera.7. Do not operate the camera beyond the specified temperature, humidity or powersource ratings. This camera is suitable for indoor and outdoor operation. Use thecamera at temperatures within -40°C~50°C (-40°F~122°F)and in an IP66 compliantenvironment; this device is not rated as submersible. The input power source is 12VDC.The use of properly fused or Class 2 power limited type supplies is highlyrecommended.8. MountingUse care in selecting a solid mounting surface which will support the weight of the camera plus any wind, snow, ice or other loading, and securely attach the camera to the mounting surface using screws and anchors which will properly support the camera. If necessary(e.g. when mounting to drop ceilings) use a safety wire to provide additional support for thecamera.Table of Contents1. PRODUCT OVERVIEW (6)1.1F EATURES (6)1.2A CCESSORY P ARTS L IST (6)1.3S PECIFICATIONS (7)1.4D IMENSIONS (8)2. INSTALLATION AND CONNECTION (9)2.1I NSTALLATION OF THE C AMERA (9)2.2A DJUST 2-A XIS B RACKET (9)2.3F OCUS A DJUSTMENT (10)2.4R EMOVE THE C ONTROLLER C AP (10)2.5I NSTALL S UNSHIELD (11)2.6C ONNECT TO A M ONITOR (12)2.7C ONNECT THE P OWER (12)3. OSD MENU & CONFIGURATION (13)3.1OSD M AIN M ENU D ESCRIPTION (14)3.1.1 LENS: MANUAL /AUTO selectable. (14)3.1.2 SHUTTER/AGC: AUTO / MANUAL selectable. (14)3.1.3 WHITE BAL: ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK selectable. (15)3.1.4 BACKLIGHT: BLC / HLC / OFF selectable. (16)3.1.5 ATR: ON / OFF selectable. (16)3.1.6 NR: ↲ (16)3.1.7 PICT ADJUST: ↲ (16)3.1.8 NEXT: ↲ (17)3.1.9 EXIT: ↲ (17)3..1.10 SAVE ALL: (17)3.1.11 PRIVACY: ON / OFF selectable. (17)3.1.12 MOTION: ON / OFF selectable. (18)3.1.13 CAMERA ID: ON / OFF selectable. (18)3.1.14 LANGUAGE (19)3.1.15 CAMERA RESET (19)3.1.16 BACK (19)1. Product OverviewAmazing low light sensitivity of 0.03 lux before the added benefits of advanced DSP technology, delivered by a 1/3” Sony Exview HAD CCD II 960H sensor, is just the beginning with the new EverFocus EZ632e. Equip with 42 IR LEDs to get extended IR range, variable output IR control to manage illumination and conserve energy, 700TVL resolution, full motion true day/night images even with no ambient light without ghosting, plus Digital Wide Dynamic Range (Sony ATR technology) smoothly work with BLC, AGC, AWB functions to handle the most challenging of bright or unbalanced scene lighting conditions. Easy to mount and install, Vandal resistant, IP66, with external focal adjustment varifocal auto iris lens and a full suite of OSD Menu and DSP functions controllable at the camera. This is the camera you have been waiting for, and might be the only camera you’ll ever need.1.1 FeaturesTrue Day/Night camera with Sony 1/3” Exview HAD CCD II 960H Sensor, 700 TVLresolution.Sony Effio-E platform to provide advanced camera functions. Vari-Focal DC Iris Lens 3.7~12mm or 9~22mm with ICR.High sensitivity, low smear, high anti-blooming and high S/N ratio for high performancevideo.True Day/Night with ICR module and 42 IR LEDs reach up to 40m (~130ft.) range. Switchable 10m / 20m / 40m IR Range for different range of requirements. Easy to use OSD Setup Menu.D-WDR functions by Sony ATR technology.Built-in Auto Electronic Shutter (AES), Auto Gain Control (AGC), Back Light Compensation(BLC) and Auto White Balance (AWB).Built-in Motion Detection, Privacy Mask advanced surveillance functions. Internal wire system with anti-cut bracket. Auto Blemish compensation up to 32 points. External manual focus adjustment.Weather Resistant IP66, Vandal Resistant and built-in heater.1.2 Accessory Parts ListPlease be careful when you unpack the box due to the electronics devices inside. Check and make sure that you have all the items listed below inside the original box: EXD330e camera x 1 User Manual x 1Power adapter pigtail x 1 Mounting template x 1Accessory kit x 1 (containing mounting screws and plastic anchors)C h a p t e r1Please Note: If an item appears to have been damaged in shipment, replace it properly in its cartonand notify the shipper. If any items are missing, notify your EverFocus Electronics Corp. Sales Representative or Customer Service. The shipping carton is the safest container in which the unit maybe transported. Save it for possible future use.1.3 SpecificationsPickup Device 1/3" SONY Exview HAD CCD II (960H)Video Format NTSC or PAL (depends on model selected)Picture Elements 976 x 494 (NTSC), 976 x 582 (PAL)Horizontal Resolution 700 TVLSensitivity 0.03 Lux / F=1.2 ; 0 Lux (IR LED On)S/N Ratio Over 48dB (AGC off)Electronic Shutter 1/60 (1/50) ~ 1/100,000sVideo Output BNC 1.0V p-p 75Ω,Gamma Correction 0.45Lens Type Vari-Focal DC Iris Lens 3.7~12mm / F1.6 with ICRVari-Focal DC Iris Lens 9~22mm / F1.6 with ICRBack Light Compensation On /OffAuto Gain Control YesWhite Balance Auto / Indoor / Outdoor / Manual / Push AutoSync. Mode InternalDay & Night True Day/Night with ICR control moduleOSD menu Yes (English / Japanese / German / French / Russian / Portuguese / Spanish/ Simplified Chinese)DNR On / OffD-WDR (ATR) On / OffMirror On / OffMotion Detection On / Off for 24x16 Detection BlocksPrivacy Mask Off/On for 8 Areas (Size Adjustable)IR LED 42 Units IR LEDIR Configuration 10m / 20m /40m DIP SwitchableIR Wavelength 850nmIR Range 40m max.Power Source 12VDCPower Consumption 12VDC: 24W max. (With Heater Operation)Operating Temperature -40°C~50°C ; -40°F~122°F (built-in heater)Weather Proof IP66 ratedHeater Yes, built-inVandal Resistant YesDimensions 109mm(W) x 267mm(L) x 172mm(H) ; 4.3”(W) x 10.5”(L) x 6.8”(H)Weight 1,080g / 2.4 lbsCertifications CE / FCC1.4 Dimensions2. Installation and Connection2.1 Installation of the CameraUse the supplied screws (in the appurtenance bag), and secure the camera in position.2.2 Adjust 2-Axis BracketAdjust the bracket while checking the view angle from the monitor. Loosen the X-Y screws and then adjust the 2-Axis bracket (X-Y to get the desired viewing angle).NOTE: This product is not suitable for horizontal 360° continuous rotation.Cha p t e r22.3 Focus AdjustmentFocus adjustment should be done with zoom focus at the same time. Use the screwdriver to adjust the zoom/ focus ratio (from wide to tele or near to far).NOTE: Focus adjustment position may be different depending on model type.2.4 Remove the Controller CapUse a coin to remove the controller cap and make adjustments.The Table below shows the suggested LED brightness and IR distance adjustment:LED Brightness IR Distance Focal LengthH (High) 25m~40m 9~22mmM (Middle) 15m~25m 6~12mmL (Low) 10m~15m 3.7~6mm(1) Function Switch1 Left Key2 Up Key3 Enter Key4 Right Key5 Down(2) IR Distance AdjustmentInstaller may use IR adjustment function according to installation conditions. It is suggested that the view angle should be verified before setting up the IR distance. 2.5 Install SunshieldTo install the sunshield, please follow the instruction shown below:2.6 Connect to a MonitorConnect the Video-out port of the camera to a monitor. As the connecting method varies depending on the instrument, therefore refer to the manual supplied with the instrument for more information.2.7 Connect the PowerConnect to a DC 12V, 500mA adaptor or an AC 24/ DC 12V adaptor (optional).Note: The Alarm out application cable is an optional item, the standard type does not provides it.3. OSD Menu & ConfigurationMain Menu DisplayOSD Setup Menu page 1LENSSHUTTER /AGC WHITE BAL BACKLIGHT ATR NRPICT ADJUST NEXT ↲EXIT ↲ SAVE ALLAUTO ↲AUTO ↲ ATW OFF OFF ↲ ↲OSD Setup Menu page 2PRIVACY MOTION DET CAMERA ID LANGUAGE CAMERA RESET BACK ↲EXIT ↲ SAVE ALLOFF OFF OFF ENGLISHMain Menu Setup• In order to display the setup menu on the screen, set the menu command or press the button panel.• Use UP/ DOWN control buttons to select each item. • Use LEFT/ RIGHT control buttons to change the data.• Use MENU control button to ENTER/ EXIT the menu display.•↲=ENTERC h a p t e r33.1 OSD Main Menu Description 3.1.1 LENS: MANUAL /AUTO selectable.LENS: MAUNALAdjustment is not required.LENS: AUTOAUTO TYPE：DCMODE：AUTO/ OPEN /CLOSE SPEED：000~255AUTO: Camera automatically controls the lens.OPEN: Lens is fully open.CLOSE: Lens is fully closed.SPEED: Speed of the lens.3.1.2 SHUTTER/AGC: AUTO / MANUAL selectable.SHUTTER/AGC: AUTOAUTO HIGH LUMINANCEMODE：SHUT+AUTO IRIS / AUTO IRIS / SHUT BRIGHTNESS：000~255LOW LUMINANCEMODE：AGC / OFFBRIGHTNESS：x0.25、x0.50、x0.75、x1.00HIGH LUMINANCEWhen LENS is setup to AUTO modeSHUT+AUTO IRIS: Exposure is controlled by auto electronic shutter combined with auto iris.AUTO IRIS: Exposure controlled by auto iris.When LENS is setup to Manual modeSHUT: Exposure controlled by electronic shutter.LOW LUMINANCESetup low lux environment, minimum AGC level.SHUTTER/AGC: MANUALMANUAL MODE：SHUT+AGCSHUTTER：1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 AGC：6.00、12.00、18.00、24.00、30.00、36.00、42.00、44.80SHUTTER: Fixed electronic shutter speed.AGC: Fixed AGC gain control.3.1.3 WHITE BAL: A TW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK selectable.WHITE BAL.: ATWATW SPEED：000~255DELAY CNT：000~255ATW FRAME：x0.50、x1.00、x1.50、x2.00 ENVIRONMENT：INDOOR、OUTDOORSPEED：ATW SpeedDELAY CNT：ATW Delay TimeATW FRAME：ATW Frame Range SetupENVIRONMENT：ATW Environment Range SetupWHITE BAL.: PUSHThe function will keep detecting the Color Temperature, and then it will keep saving the parameter to camera.WHITE BAL.: USER1USER1 B-GAIN：000~255 R-GAIN：000~255WHITE BAL.: USER2USER2 B-GAIN：000~255 R-GAIN：000~255WHITE BAL.: MANUALMANUAL LEVEL：19~54WHITE BAL.: ANTI CRThe function can reduce the color rolling issue, and it is the same with CRS (Color Rolling Support) function.WHITE BAL.: PUSH LOCKIt detects the Color Temperature to save it into the camera.3.1.4 BACKLIGHT: BLC / HLC / OFF selectable.BACKLIGHT.: BLCEnable the function of Back Light Compensation, and the detection method isBLC Smart.BACKLIGHT.: HLCEnable the function of High Light Compensation.3.1.5 ATR: ON / OFF selectable.ATR.: ONLUMINANCE LOW、MID、HIGHCONTRAST LOW、MIDLOW、MID、MIDHIGH、HIGHLUMINANCE：Set the extension of the luminance compressionCONTRAST：Set the extension of the contrast enhancement.NOTE: If ATR function is enabled, please avoid to enable the BACKLIGHT function at the same time.3.1.6 NR: ↲NR MODE Y/C、Y、C、OFFY LEVEL 000~015C LEVEL 000~015NR MODE：Set the DNR mode of Y/C, Y and C.Y LEVEL：Set the Y filter strength.C LEVEL：Set the C filter strength.NOTE: The Y/C mode is the automanic DNR mode.3.1.7 PICT ADJUST: ↲MIRROR ON / OFFBRIGHTNESS 000~255CONTRAST 000~255SHARPNESS 000~255HUE 000~255GAIN 000~255Adjust all camera parameters.3.1.8 NEXT: ↲Move to MAIN MENU.3.1.9 EXIT: ↲Exit OSD to choose the list.3..1.10 SAVE ALL:When you change the OSD menu settings, before leaving the OSD item option SAVEALL. Press ENTER key to change the memory settings for the OSD.3.1.11 PRIVACY: ON / OFF selectable.PRIVACY: ONAREA SEL Max. 8TOP 000~244 (NTSC) / 000~288(PAL)BOTTOM 000~244 (NTSC) / 000~288(PAL)LEFT 560TVL：000~378 (NTSC)、000~370 (PAL) 650TVL：000~474 (NTSC)、000~468 (PAL)RIGHT 560TVL：000~378 (NTSC)、000~370 (PAL) 650TVL：000~474 (NTSC)、000~468 (PAL)COLOR 1~8TRANSP 0.00 / 0.50 / 0.75 / 1.00MOSAIC ON / OFFAREA SEL：Select the mask frame to be adjusted.NOTE: When the MONITOR AREA has been set to ON by the MOTION DET setting, only 4 PRIVACY AREA SEL are selectable (1 / 4, 2 / 4, 3 / 4, 4 / 4). TOP： Set the top side of the mask frame selectedBOTTOM：Set the bottom side of the mask frame selectedLEFT： Set the left side of the mask frame selectedRIGHT： Set the right side of the mask frame selectedCOLOR： Set the colors of the mask frames.TRANSP： Set the transparency ratio of the mask frames.MOSAIC： Set the mask frame mosaic function to ON or OFF.3.1.12 MOTION: ON / OFF selectable.MOTION DET: ON DETECT SENSE 000~127BLOCK DISP ON / OFF / ENABLEMONITOR AREAON / OFF AREA SEL 1~4TOP 000~244 (NTSC) / 000~288(PAL)BOTTOM 000~244 (NTSC) / 000~288(PAL)LEFT 540TVL ：000~378 (NTSC)、000~370 (PAL) 650TVL ：000~474 (NTSC)、000~468 (PAL) RIGHT 540TVL ：000~378 (NTSC)、000~370 (PAL) 650TVL ：000~474 (NTSC)、000~468 (PAL)DETECT SENSE: Set the motion detection sensitivity. BLOCK DISP: Control the ON/ OFF status of the motion detection blockdisplay.MONITOR AREA: Set whether to use the monitoring frames. AREA SEL: Select the monitoring frame to be set. TOP: Set the top side of the monitoring frame selected BOTTOM: Set the bottom side of the monitoring frame selected LEFT: Set the left side of the monitoring frame selected RIGHT: Set the right side of the monitoring frame selected3.1.13 CAMERA ID: ON / OFF selectable.A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 - ! ” # $ % & ’ ( ) _ , ￥ ： ； < = > ? @ \ ^ * . x + / Each User Font← → ↑ ↓The camera ID cursor moves in the direction of the arrow when the Enter operation input is performed from the status in which ←, →, ↑ or ↓ has been selected using the character selection cursor.CLRThe character selected by the camera ID cursor is cleared when the Enter operation input is performed from the status in which CLR has been selected using the character selection cursor.POS The display switches to the camera ID display position setting screen when the Enter operation input is performed from the status in which POS has been selected using the character selection cursor. On the camera ID display position setting screen, the camera ID display position is changed in real time in response to the left, right, up or down operation input. When the Enter operation input is performed, the display position is entered, and the display returns to the camera ID setting screen.3.1.14 LANGUAGEThere are 8 kind of language: English / Japanese / German / French / Russian / Portuguese / Spanish / Simplified Chinese selectable.3.1.15 CAMERA RESETReset Factory default setup.3.1.16 BACKReturn to MAIN MENU, page1.EverFocus Electronics Corp.EverFocus Taiwan:12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 2698 2380 ***********************.twEverFocus Europe - Germany: Albert-Einstein-Strasse 1, D-46446 Emmerich, Germany TEL: +49 2822 93940 FAX: +49 2822 939495 www.everfocus.de *****************EverFocus China - Beijing:Room 609, Technology Trade Building, Shangdi Information Industry Base, Haidian District, Beijing 100085, China TEL: +86 10 6297 3336~39 FAX: +86 10 6297 1423 ***********************.cnEverFocus China - Shenzhen: 4F, No. 2, D4 Building, Wan Yelong Industrial Park, Tangtou Road, Shiyan,Baoan, Shenzhen, Guangdong 518101, China TEL: +86 755 2765 1313 FAX: +86 755 2765 0337 ***********************.cnEverFocus USA - California:1801 Highland Avenue, Unit A, Duarte, CA 91010, USATEL: +1 626 844 8888 FAX: +1 626 844 8838 *******************EverFocus USA - New York:415 Oser Avenue, Unit S, Hauppauge, NY 11788, USATEL: +1 631 436 5070 FAX: +1 631 436 5027 *******************EverFocus Japan:5F, Kinshicho City Building, 2-13-4 Koto-Bashi,Sumida-Ku, Tokyo, 130-0022, Japan TEL: +81 3 5625 8188 FAX: +81 3 5625 8189 www.everfocus.co.jp *****************.jpEverFocus Europe - UK:Unit 12, Spitfire Business Park,Hawker Road, Croydon Surrey, CR0 4WD, UK TEL:+44(0)2086499757************FAX: +44 (0) 20 8649 9907 ********************* EverFocus India:Suite 803, Housefin Bhavan, C-21, Bandra Kurla Complex, Bandra (East), Mumbai 400051, India TEL: +91 22 6128 8700 FAX: +91 22 6128 8705 www.everfocus.in ******************。
EW-7811UTC安装指南说明书
EW-7811UTC 11-2020/ v1.6I.产品信息 (1)I-1. 包装内容 (1)I-2. LED指示灯 (1)I-3. 系统需求 (1)I-4. 安规说明 (2)II.安装 (3)III.Windows用户 (5)III-1. 安装驱动程序 (5)III-2. 卸除驱动程序 (8)III-2-1. Windows XP/Vista/7 用户 (8)III-2-2. Windows 8/8.1用户 (8)IV.Mac OS用户 (9)IV-1. 安装驱动程序 (9)IV-2. 卸除驱动程序 (15)V.卸除网络卡 (16)V-1. Windows XP用户 (16)VI-2. Windows Vista 用户 (16)VI-3. Windows 7用户 (17)VI-4. Windows 8/8.1用户 (18)VI-5. Mac用户 (19)VI.使用本产品 (20)VII-1. Windows用户 (20)VII-2. Mac: 联机至无线网络 (21)VII-3. Mac:无线联机工具程序 (24)VII-3-1. 联机状态 (24)VII-3-2. Profiles (25)VII-3-3. 可联机网络 (27)VII-3-4. WPS (28)VII-3-5. 信息 (31)VII-4. WPS设定 (31)M u l t i-L a n g u a g e Q u i c k I n s t a l l a t i o n G u i d e(Q I G)o n t h e C DČešt i n a: Českého průvodce rychlou instalací naleznete napřiloženém CD s ovladači.D e u t s c h:Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD.E s p año l: Incluido en el CD el G.R.I. en Español.F r a nça i s: Veuille z trouver l’français G.I.R ci-joint dans le CD.I t a l i a n o:Incluso nel CD il Q.I.G. in Italiano.M a g y a r:A magyar telepítési útmutató megtalálható a mellékeltCD-n.N e d e r l a n d s: De nederlandse Q.I.G. treft u aan op de bijgesloten CD. P o l s k i: Skrócona instrukcj a instalacji w języku polskim znajduje się na załączonej płycie CD.P o r t u g uês: Incluído no CD o G.I.R. em Portugues.Русский:Найдите Q.I.G. на pусскoмязыке на приложеном CD.Tür kçe: Ürün ile beraber gelen CD içinde Türkçe Hızlı KurulumKılavuzu'nu bulabilirsiniz.Українська:Для швидкого налаштування Вашого пристрою, будь ласка, ознайомтесь з інструкцією на CD.I. 产品信息I-1. 包装内容EW-7811UTC安装指南CD 光盘I-2. LED 指示灯I-3. 系统需求- Windows XP/Vista/7/8/8.1~, Mac OS X 10.7~ - USB 2.0接埠 - 硬盘: 100MB - 光驱I-4. 安规说明为确保您及本产品操作使用上的安全，请务必详读及遵照以下说明指示。
VHD-V500 1.0用户手册(维海德)V1.2
自动、手动
USB 接口
USB2.0
0.5 Lux @ (F1.8, AGC ON)
通讯接口
RS232、RS485
1/25s ~ 1/10000s
支持的协议类型 VISCA、Pelco-D、Pelco-P
自动、室内、室外、一键、手动
电源适配器
DC12V/2.0A
支持
输入电流
2.0A（最大）
2D&3D 数字降噪
1、数字键 设置预置位或调用预置位
2、*键
3、设置/清除预置位键 设置预置位：保存一个预置位 设预置+数字键（0-9）：设置一个相对应于数字键 的预置位 预置位取消：清除一个预置位 清预置+数字键（0-9）：取消相应的预置位 或：[*]+[＃]+[清预置]键：取消所有预置位
4、背光补偿键 背光 ON/OFF：打开/关闭背光补偿（循环作用） （注：仅在曝光模式为自动下有效） 说明：若拍摄对象后面有光源，拍摄对象就会变的 黑暗。在这种情况下，按背光 ON/OFF 键。如要取 消这个功能，再按一次背光 ON/OFF 键。
定的范围内使用：
不要使本机受到淋雨或受潮； 为防止触电危险，不要打开机壳；只能由合格的技术人员去执行安装和维修； 不要在超出限定温度、湿度或电源规格的状态下使用； 清洗摄像机镜头时，请使用干的软布擦拭，如污垢严重时，请使用中性清洁剂轻轻擦
拭。不要用强烈的或带有腐蚀性的清洁剂，以免镜头划伤，影响图像效果；
5、摄像机上电后开始初始化，右上转到极限位，然后水平和垂直都转到中间位置，电机停止运转，初始 化完毕。（注意：若保存了 0 号预置位，则云台会置位到 0 号预置位）
6、恢复出厂参数设置：用遥控器按【菜单】键进入 OSD 菜单调整，选择【菜单】->【恢复默认值】->【恢 复默认】项。按左右键选择【是】，按【HOME】键确认。
海康ds7804nB K1说明书
登录192.168.1.64，设置新密码；在【配置】-【网络】-【基本配置】可设置摄像头IP地址等；在【配置】-【系统】-【系统配置】-【时间配置】可设置校时；在【配置】-【系统】-【用户管理】可管理登录用户；在【配置】-【图像】-【OSD配置】可设置时间制式等。
具体介绍如下：1、将摄像头用网线连接电脑，再将电脑IP地址设置成192.168.1.x，(x可以是除64以外的数字)，打开浏览器，输入192.168.1.64；2、第一次登录摄像头时，用户名和密码均为admin，弹出密码设置提示，设置一个新的登录密码，以后登录也是用这个新密码；3、在视频预览界面，单击【配置】-【网络】-【基本配置】，可以对摄像头进行IP地址、网关和子网掩码进行设置；4、在【配置】-【系统】-【系统配置】-【时间配置】里面，可以选择手动校时、或者是NTP服务器校时；5、在【配置】-【系统】-【用户管理】里面，可以对登录用户进行管理，增加或删除用户；6、在【配置】-【图像】-【OSD 配置】里面，可以设置摄像头名称，设置时间制式，日期格式。
海尔电子洗衣机产品说明书
Section 6: Parts DataDC50X264310131211216547Cabinet GroupKey Part Number Description Quantity * 9960-285-008Door Assy., Loading Complete-Wht (2)* 9960-285-011Door Assy., Loading Complete-SS (2)* 9960-285-007Door Assy., Loading Complete-Chrome/BLK/SS (2)1 9960-284-002Door Assy., Loading-SS(ring only) (2)1 9960-284-004Door Assy., Loading-Chrome(ring only) (2)2 9982-353-002Plate Assy., Hinge (Wht) No Pin (2)2 9982-353-001Plate Assy., Hinge (SS) No Pin (2)* 9545-012-015Screw, Hinge to Door (8)* 8640-413-002Nut, Hinge to Door (8)3 9212-002-004Glass, Door (2)4 9206-413-002Gasket, Glass Black (2)* 9548-117-000Support, Door Glass (2)5 9206-420-005Gasket, Outer Rim Black (2)6 9244-082-001Handle, Loading Door (2)* 9545-018-017Screw, Handle 1/4-20 x 3/8 (4)* 9531-033-003Stud, Door Catch (2)* 8640-413-001Nut, Hex (2)* 8640-413-003Nut, Acorn (2)* 9086-015-002Catch, Loading Door (2)* 8638-190-009Pop Rivet for mtg. catch (4)* 8641-582-006Lockwasher (4)* 8640-399-001Spring Nut (6)7 9989-521-003Panel Assy., Front- Lower (Wht) (1)7 9989-521-001Panel Assy., Front- Lower (SS) (1)8 9989-517-003Panel Assy., Front- Upper (Wht) (1)8 9989-517-001Panel Assy., Front- Upper (SS) (1)* 9277-054-001Insulation Front Panel, half moon (top) (2)* 9277-054-002Insulation Front Panel, half moon (bottom) (2)9 9545-008-014Screw, FLHDCR, 10B x 1 (14) (6)* 8641-585-001 Lockwasher* 8640-399-001Nut, Spring (12)10 9544-069-002Strap, Hinge (Wht) (2)10 9544-069-005Strap, Hinge (SS/Black) (2)* 9545-012-028Screw, Hinge to Panel (8)11 9545-052-001Screw, Door to Hinge Strap (Special Black Type) (2)12 8641-436-003Washer, Fiber (2)13 9021-041-001Acceptor, Coin (1)* 9486-149-001Retainer, Coin Acceptor (2)14 9545-053-002Screw (4)* 9801-099-001Switch, Optical (1)Cabinet Group ContinuedKey Part Number Description Quantity15 9994-032-001Escutcheon, Upper (1)16 9435-039-002Trim, Overlay-Upper Blue (1)16 9435-039-001 Trim, Overlay-Upper Black (1)17 9994-033-001Escutcheon, Lower (1)18 9435-023-001Trim, Overlay-Lower Blue (1)18 9435-031-001Trim, Overlay-Lower Black (1)* 9545-020-009Screw (20)19 9412-167-002Nameplate Stack Dryer Express Blue (1)19 9412-167-001Nameplate Stack Dryer Express Black (1)20 9866-005-001Lint Drawer Assembly Blue (2)20 9866-005-004Lint Drawer Assembly Black (2)21 9435-024-001Overlay Trim, Lint Drwr-Blue (1)21 9435-032-001Overlay Trim, Lint Drwr-Black (1)* 9532-074-003Felt Seal ( back of lint screen assembly ) (2)* 9805-033-002Lint Screen Assembly ONLY (no front) (2)* 9555-057-008Replaceable Lint Screen Only (2)22 8650-012-004Lock and Key, Lint Drawer (2)* 6292-006-010Key 6101 only (2)* 9095-043-001Cam, Lock (2)* 9545-008-001Lint Screen Strap Hold Down Screws 10Bx 1/4 (32)23 9857-198-001Controls Assy, Blue (1)23 9857-198-003Controls Assy, Black (1)* 9627-869-001Harness, Electronic Control (1)24 8650-012-003Lock and Key, Control (1)* 9095-041-001Cam, Lock (1)* 6292-006-007Key only 6324 (1)* 9627-855-003Harness, Heat Sensor (1)* 8640-276-002Wire Nut Connector Grey (4)25 9501-004-003Sensor Temp Control (2)26 9501-008-001Bracket for Heat Sensor Mounting (Under Basket) w/ sensor..2* 9545-045-005Screw, Round Head (Mounts sensor; phillips head) (2)* 9209-037-002Gromm.et, 3/16 ID (2)* 8544-006-001Leg, Leveling 1/2” (4)* 9074-320-001 Cover, Cabinet (Top) (1)* 9277-041-017 Insulation Cabinet Cover (1)* 9732-276-001Kit for Dryers without Neutral and using 208-240 volt (1)* 9732-102-013LP Kit for 50Lb Stk Dryers (1)* 9732-243-001Stack Dryer Trunion Puller (1)* 9544-041-002 Strap - Bead Tie (1)27 9942-038-005 Vault, Coin Box (1)* 9545-008-024 Screws, Mounting-Coin Vault (2)28 9897-099-002 Coin Box Assy, Large Blue (1)28 9807-099-004 Coin Box Assy, Large Black (1)191526252792531089Control Parts GroupKey Part Number Description Quantity * 9857-198-001Controls Assy, Electronic Mounted With Membrane Switch, BLU (1)* 9857-198-003Controls Assy, Electronic Mounted With Membrane Switch, BLK (1)1 9826-008-001 Trough Assembly (1)2 9032-062-002 Button-Push, Control, Blue (2)2 9032-062-001 Button-Push, Control, Black (2)3 9538-166-011Spacer-Metal, 4mm (4)4 9486-158-001 Retainer-Push Button (2)5 8640-424-002Nut-Hex, Elastic stop, #4-40 (4)6 8652-130-038Terminal-Grounding clip (1)7 9534-365-001Spring-Flat, Control (1)8 9545-008-001Screw-Hex, #10B x 1/4 (2)9 9545-044-010 Screw-Hex, #10B x 1/4 (10)9 8641-582-005Washer-External tooth, #6 (10)10 9435-038-001Overlay-Control, Coin, Black (1)10 9435-038-002Overlay-Control, Coin, Blue (1)11 9021-041-001Acceptor-Coin, Optical (1)* 9486-149-001Retainer, Coin Acceptor (1)12 9545-053-002Screw (4)* 9801-099-001 Optical Sensor, Replacement (1)Note: Jumpers required if using 1.5 Control on Older Machines (P9 Connection)* 8220-155-001 Wire Assy, Jumper, 30Lb Stack Coin (1)* 8220-155-002 Wire Assy, Jumper, 50Lb Stack Coin (1)Door Switch GroupPart NumberDescription Quantity9539-487-001Door Switches (2)Hinge Plate Cover1 9074-340-002 Cover-Hinge, Black .....................................................................22 8636-008-010 Screw-TRHDCR, 10B x 3/8, Black.. (4)12Bearing Housing GroupKey Part Number Description Quantity J1 9241-189-002 Housing, Bearing (2)J2 9036-159-003Bearing, Ball Rear..................................................................... .2 * 9538-183-001 Spacer, Bearing (2)* 9036-159-001Bearing, Ball Front .................................................................... .2 J5 9545-017-017Bolt, 1/2 x 3/4 . (8)J7 8640-417-002Nut, 1/2 (8)* 9803-201-001Bearing Housing Complete Ass’y (includes bearings,spacer) (2)J4 9545-017-018Screw 1/2 x 1 1/2 (4)Burner Housing GroupKey Part Number Description Quantity * 9803-207-001 Housing Assembly, Burner (2)1a 9452-730-001Service Burner Plate Front... (2)1 9452-729-001 Service Plate baffl e Recirculation Chamber Clean Out (2)* 9545-008-006Screws (8)2 9545-008-001Screw (16)18 9003-220-001Angle, Burner Support (2)* 9545-008-006Screw (4)17 9048-020-002Burner, Main (4)* 9545-008-006Screw 10AB x 3/8” (4)* 9454-824-001 Panel, Back Burner Housing (2)4 9545-008-001Screw 10B x1/4” (8)5 9875-002-003Electrode Assy, Ignition (2)19 9545-045-001Screw, Electrode Mtg 8B x 1/4” (4)7 9379-186-001Valve, Gas Shut Off (1)8 9857-134-001Control Assy, Gas (2)9 9381-012-001Manifold, Assy (2)* 9425-069-021Orifi ce, Burner-Natural #27 (4)* 9425-069-022Orifi ce, Burner-LP #44 (4)10 9029-175-001Bracket, Manifold (2)22 8615-104-038Pipe Plug in end of Burner Manifold (2)* 9545-008-006Screw (4)12 9576-203-002Thermostat, Hi-Limit (2)* 9538-142-001Spacer, Hi-Limit (4)* 9545-045-007 Screw 8B x 3/4” (4)13 9074-329-001Cover, Hi-Limit Stat Ignitor (2)* 9545-008-006Screw (6)* 9576-207-008Thermostat, Safety Shutoff (2)* 9545-008-006Screw (4)15 9825-062-001Cover, Safety Stat (2)* 9545-008-024Screw (6)16 9857-116-003Control, Ignition Fenwall (3 trybox) (2)* 9732-102-013Kit, LP Conversion 50Lb Stack Kit (2)* 9838-018-003Welded One Piece Gas Pipe Assembly (1)Part # 8533-085-001 9/14Burner Housing Group Photos10221092221851A141594851613Rear ViewKey Part Number Description Quantity * 9627-861-001Wire Harness Overtemperature Switch/Air Switch (2)* 9801-098-001Switch Assy, Air Flow (2)1 9539-461-009Switch, Air Flow (2)2 9029-200-001 Bracket, Switch- Air Flow (2)3 9008-007-001Actuator, Switch (2)4 9451-169-002Pin, Cotter (2)5 9545-020-001Screw 4-40 x 5/8” (4)* 8640-401-001Nut, Special Twin .#4-40 (2)* 9550-169-003Shield, Switch (2)6 9376-322-001Motor, Drive (2)7 9452-770-001Plate, Motor Mounting (1)* 9545-029-008Bolt 3/8” - 16 x 3/4” (8)* 8641-582-003Lockwash Spring 3/8 (8)8 9545-018-019Screw, Motor Plate to Back Assy. 1/4-20x 2 1/2 (8)* 8641-582-007Lockwasher 1/4 (8)9 9538-163-006Spacr (8)* 8641-581-017Flat Washer 1/4 x 7/8 (24)* 9209-086-002Rubber Grommet (8)* 9538-166-006Grommet Spacers (8)* 9545-028-013Screw, Set (4)10 9962-018-002Back Assy, Blower Hsg (2)11 9991-053-001Support Assy, Intermed. Pulley (2)12 9545-029-010Bolt, Rd Hd 3/8-16 x 1 1/4 (6)12 8640-415-004Nut Flange Wizlock 3/8” - 16 (6)12 8641-581-035Washer, Flat (6)13 9545-029-003Bolt, 3/8-16 x 1 1/2 (2)14 9861-022-001Arm Assy-Tension, Complete (2)* 9487-200-003Ring-Retaining (6)15 9908-048-003Pulley Assy, Intermediate with bronze fl ange bearing (2)* 9036-145-002Bronze Flange Bearing (4)16 9908-047-002Pulley Driven Tumbler (2)17 9040-076-009Belt, Drive Motor (2)18 9040-073-011Belt, Driven Intermediate to Tumbler (2)19 9534-151-000Spring, Tension (2)20 9099-012-005Chain, Tension (2)21 9248-022-002Hook, Tension (2)* 9451-146-001Pin, Damper Hinge (2)* 9074-334-001 Cover Duct Upper (1)22 9973-032-001 Heat Recirculation Assembly Duct (2)* 9453-169-013Motor Pulley - Driver (1)* 9545-028-013Set Screws (2) (2)* 9278-043-001Impeller23 8641-581-026Washer, Flat 1/2” for Tumbler Pulley (2)24 9545-017-009Bolt, 1/2”-13 x 1 1/4 (2)25 8641-582-016Washer, Star 1/2” for Tumbler Pulley (2)* 9545-008-001Screw 10 Bx 1/4” (6)* 9545-014-004Bolt, 5/16-18 x 5/8” (8) (8)5/16-18* 8640-400-003Nut,* 9538-184-001Spacer, Shaft (2)* 9487-234-005Ring Tolerance (2)* 9125-007-001Damper Inside Duct Exhaust (2)* 9125-007-002Damper Inside Duct Exhaust (1)* 8520-141-000Nut, Spring (4)* 9074-335-001Cover Duct Lower (1)* 9545-008-024Screw 10ABx 3/8” (72)* 9029-173-001Bracket for Wire Harness Under Burner Housing (2)Part # 8533-085-001 9/14Part # 8533-085-001 9/14Rear View Photos1264722Rear Panel & Cover GroupKey Part Number Description Quantity19208-090-001Rear Guard Side Panel 1 (2)4 9545-008-024Screws 10 AB x 3/8 (30)5 8502-649-001Label - Connection Electrical (1)8 9208-089-001Rear Guard Back Panel (2)10 8502-600-001Label Warning & Notice (1)11 8502-645-001Label - Instructions (1)12 9109-113-001Transition Assembly Outlet (1)13 9074-320-001 Top Cover Dryer Panel (1)14 9550-188-001 Top Burner Housing Heat Shield Inlet (1)15 9074-321-001 Top Panel Burner Housing Cover (1)Part # 8533-085-001 9/141851113121514Tumbler GroupKey Part Number Description Quantity 9848-131-001Tumbler Assembly Galvanized w/spider (2)G2 9568-013-001Spider Assembly (2)G3 9497-226-002Rod, Tumbler (6)G4 8640-417-005Nut, 1/2 - 13 (6)G6 8641-590-002Washer, Special (6).............................................................................AR G7 9552-013-000Shim* 9848-130-002Tumbler Assembly Stainless Steel (2)G1 9848-130-001Tumber Assembly Galvanized (2)Part # 8533-085-001 9/14Control Assembly GroupKey Part Number DescriptionQuantity* 9857-189-001 Control Assmbly Complete (all below included) .............................1* 9108-117-001 Control Box Cover ..................................................................... 1* 8220-001-478 Wire Assembly Green 7” ............................................................ 1* 8639-621-007 Screw #10-32 x 12 Green ............................................................1* 8641-582-006 Lockwasher Ext Tooth #10 ..........................................................13 9897-026-002 Terminal Block Main Power Middle ...............................................14 9897-026-001 Terminal Block ............................................................................2* 9545-045-012 Screw #8 ABx 1/2 for terminal block ............................................6 5 8711-011-001 Transformer Ignition ...................................................................2* 9545-008-024 Screws 10AB x 3/8” ...................................................................46 9982-348-001 Plate Assembly MTG Ignition Control............................................2* 9545-008-024 Screws 10B x 1/4” MTG Above Plate and Others ...........................47 9857-116-003 Ignition Control ..........................................................................2* 8640-411-003 #6-32 Nuts ................................................................................48 9631-403-009 Wire Assembly High Voltage Upper ..............................................19 9627-860-001 Wire Harness Ignition Control Upper ............................................110 9627-860-002 Wire Harness Ignition Control Lower ............................................1* 9053-067-002 Bushing Wire 7/8” .......................................................................413 9200-001-002 Fuseholder Assembly ..................................................................314 8636-018-001 Fuse 1.5 Amp .............................................................................315 5192-299-001 Relay Power ...............................................................................216 9897-035-001 Terminal Block Assembly Main Power Inlet ...................................1* 9545-008-024 Screw #8 AB x 1/2” ....................................................................2* 8220-062-036 Wire Assembly Red/Black 14” ......................................................1* 8220-062-037 Wire Assembly Red/White 14” .....................................................1* 8220-062-038 Wire Assembly White 14” ............................................................221 9627-864-004 Wire Harness Motor Extension .....................................................2* 9527-007-001 Stand Off - Wire Saddle / Arrowhead ..........................................13* 9545-031-005 Screw 6 B x 3/8” ........................................................................422 9558-029-003 Strip Terminal Marker (Behind Input Power) ..................................124 9627-863-001 Wire Harness Main Extension Access Under Burner Housing .........123 9631-403-008 Wire Ass’y - High Voltage Lower ..................................................125 9627-859-001 Wire Harness - Main Power (1)Part # 8533-085-001 9/14Control Assembly GroupPart # 8533-085-001 9/1416252223245Coin AccecptorKey Part Number Description Quantity1 9021-041-001Coin Accecptor, Optical (1)Replacement (1)2 9801-099-001Sensor-Optical,3 9545-039-002Screw, Heighth Bar, 3mm (2)* 9486-136-001 Retainer, Coin Acceptor (1)* 9545-053-002 Screw (4)Part # 8533-085-001 9/14NotesPart # 8533-085-001 9/14NotesPart # 8533-085-001 9/14Section 7: VoltageConversionPart # 8533-085-001 9/14Part # 8533-085-001 9/14Instructions - Convert a Dual Voltage Stack Dryer from 120V to 208-240V with Neutral Wire Only1. Remove incoming power from the dryer. Use a known working voltmeter to check power.2. Remove the cover of both the upper and lower control box assemblies from the dryer using a 5/16” wrench.3. Move the black/blue wire from the N position of the main power terminal block to the L2 position of the mainpower terminal block in the upper control box assembly. See Figure 6 below.4. Move the white wire of the upper motor harness to an upper inner left terminal in the middle terminal block in thelower control box assembly. See Figure 6 below.5. Move the orange wire of the upper motor harness to an upper inner left terminal in the middle terminal block inthe lower control box assembly. See Figure 6 below.6. Move the white wire of the lower motor harness to a lower inner left terminal in the middle terminal block in thelower control box assembly. See Figure 6 below.7. Move the orange wire of the lower motor harness to a lower inner left terminal in the middle terminal block in thelower control box assembly. See Figure 6 below.8. Reconnect power to the dryer and test to ensure proper operation; one line voltage to L1, one line voltage to L2,the neutral to N, and the earth ground to E.9. Reinstall the cover of both the upper and lower control box assemblies from the dryer using a 5/16” wrench.Part # 8533-085-001 9/14NotesPart # 8533-085-001 9/14Section 9: MaintenancePart # 8533-085-001 9/14MaintenanceDaily1. Clean lint screen by unlocking and sliding out in their tracks for access. Use soft brush ifnecessary. Failure to do so will slow drying and increase gas usage and temperatures through out the dryer.2. Check lint screen for tears. Replace if necessary.Monthly1. Remove lint accumulation from end bells of motor.2. Clean lint from lint screen compartment.3. Remove lint and dirt accumulation from top of the dryer and all areas above, and around theburners and burner housing. Failure to keep this portion of the dryer clean can lead to a buildup of lint creating a fi re hazard.4. Inspect Recirculation burner housing for excessive buildup.5. Place a few drops of light oil on top and bottom pivots of the clothes door hinge.6. Grease bearings and shaft of intermediate drive pulley.Quarterly1. Check belts for looseness, wear or fraying.2. Inspect gasket of door glass for excessive wear.3. Check tightness of all fasteners holding parts to support channel.4. Check tightness of tumbler shaft retaining nut. MUST MAINTAIN 150 FOOT LBS.5. Remove lint accumulation from primary air ports in burners.6. Grease pivot pins and tension arms where in contact with each other.Semiannually1. Remove and clean main burners.2. Remove all orifi ces and examine for dirt and hole obstruction.3. Remove all lint accumulation. Remove front panel, lint screen housing and remove lintaccumulation.Annually1. Check intermediate pulley bearings for wear.2. Check and remove any lint accumulation from exhaust system.NOTE: DRYER MUST NOT BE OPERATED WITHOUT LINT SCREEN IN PLACE。
高清摄像头使用说明书
Eaton 电路保护器 Series G 目录说明书
2Catalog Number SelectionThis information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.Series G—EG-Frame (15–125 Amperes)Notes1Cannot be UL rated.2Available only as 125 and 160A sizes.Terminations/Hardware Terminals Mounting Hardware M = Metric end caps E = Imperial end caps G = Line/load standard B = Bolt-on Metric Imperial Metric —FrameEPerformance 600Y/347480415240B —181825E 18252535S 22354085H 256570100C 35100100200KMolded case switch2Standard/Application G = IEC/CE/UL/CSAAmperes016 1015020025030032 1035040045050060063 1070080090100110125160 1Number of Poles1 = One2 = Two3 = Three4 = Four—neutral 0% protected 7 = Four—neutral 100% protectedTrip Unit FF = Fixed fixedAF = Adjustable thermal fixed magnetic KS = Molded case switchE G H 3 015 FF Ge s y of C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w2Product SelectionComplete Breaker (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) IC Rating at 415/480 VoltsEG-Frame—18/18Notes1 16, 32, 63 and 160A are not UL listed ratings.2 Adjustable thermal are not UL listed.3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on the LH side.Maximum Continuous Amps at 40°C 1 Single-Pole Two-Pole Three-Pole Four-Pole 3Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable 2 Thermal,Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable 2 Thermal,Fixed Magnetic Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number 15EGB1015FFG EGB2015FFG EGB3015FFG —EGB4015FFG —16EGB1016FFG EGB2016FFG EGB3016FFG —EGB4016FFG —20EGB1020FFG EGB2020FFG EGB3020FFG —EGB4020FFG EGB4020AFG25EGB1025FFG EGB2025FFG EGB3025FFG EGB3025AFG EGB4025FFG EGB4025AFG 30EGB1030FFG EGB2030FFG EGB3030FFG —EGB4030FFG —32EGB1032FFG EGB2032FFG EGB3032FFG EGB3032AFG EGB4032FFG EGB4032AFG 35EGB1035FFG EGB2035FFG EGB3035FFG —EGB4035FFG —40EGB1040FFG EGB2040FFG EGB3040FFG EGB3040AFG EGB4040FFG EGB4040AFG 45EGB1045FFG EGB2045FFG EGB3045FFG —EGB4045FFG —50EGB1050FFG EGB2050FFG EGB3050FFG EGB3050AFG EGB4050FFG EGB4050AFG 60EGB1060FFG EGB2060FFG EGB3060FFG —EGB4060FFG —63EGB1063FFG EGB2063FFG EGB3063FFG EGB3063AFG EGB4063FFG EGB4063AFG 70EGB1070FFG EGB2070FFG EGB3070FFG —EGB4070FFG —80EGB1080FFG EGB2080FFG EGB3080FFG EGB3080AFG EGB4080FFG EGB4080AFG 90EGB1090FFG EGB2090FFG EGB3090FFG —EGB4090FFG —100EGB1100FFG EGB2100FFG EGB3100FFG EGB3100AFG EGB4100FFG EGB4100AFG 125EGB1125FFG EGB2125FFG EGB3125FFG EGB3125AFG EGB4125FFG EGB4125AFG 160——EGB3160FFGEGB3160AFGEGB4160FFGEGB4160AFGEG-Framee s y of C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w2EG-Frame—25/25 Single-Pole UnavailableEG-Frame—25/25Notes1 16, 32, 63 and 160A are not UL listed ratings.2 Adjustable thermal are not UL listed.3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on the LH side.Maximum Continuous Amps at 40°C 1 Two-Pole Three-PoleFour-Pole 3Fixed Thermal, Fixed MagneticFixed Thermal, Fixed Magnetic Adjustable 2Thermal,Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable 2Thermal,Fixed Magnetic Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number 15EGE2015FFG EGE3015FFG —EGE4015FFG —16EGE2016FFG EGE3016FFG —EGE4016FFG —20EGE2020FFG EGE3020FFG —EGE4020FFG EGE4020AFG 25EGE2025FFG EGE3025FFGEGE3025AFG EGE4025FFG EGE4025AFG 30EGE2030FFG EGE3030FFG —EGE4030FFG —32EGE2032FFG EGE3032FFG EGE3032AFG EGE4032FFG EGE4032AFG 35EGE2035FFG EGE3035FFG —EGE4035FFG —40EGE2040FFG EGE3040FFG EGE3040AFG EGE4040FFG EGE4040AFG 45EGE2045FFG EGE3045FFG EGE3050AFG EGE4045FFG —50EGE2050FFG EGE3050FFG —EGE4050FFG EGE4050AFG 60EGE2060FFG EGE3060FFG —EGE4060FFG —63EGE2063FFG EGE3063FFG EGE3063AFG EGE4063FFG EGE4063AFG 70EGE2070FFG EGE3070FFG —EGE4070FFG —80EGE2080FFG EGE3080FFG EGE3080AFG EGE4080FFG EGE4080AFG 90EGE2090FFG EGE3090FFG —EGE4090FFG —100EGE2100FFG EGE3100FFG EGE3100AFG EGE4100FFG EGE4100AFG 125EGE2125FFG EGE3125FFG EGE3125AFG EGE4125FFG EGE4125AFG 160—EGE3160FFGEGE3160AFGEGE4160FFG EGE4160AFGEG-Framee s y of C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w22.2Molded Case Circuit BreakersSeries GEG-Frame—40/35Notes1 16, 32, 63 and 160A are not UL listed ratings.2 Adjustable thermal are not UL listed.3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on the LH side.Maximum Continuous Amps at 40°C 1Single-Pole Two-Pole Three-Pole Four-Pole 3Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable 2Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable 2Thermal, Fixed Magnetic Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number 15EGS1015FFG EGS2015FFG EGS3015FFG —EGS4015FFG —16EGS1016FFG EGS2016FFG EGS3016FFG —EGS4016FFG —20EGS1020FFG EGS2020FFG EGS3020FFG —EGS4020FFGEGS4020AFG 25EGS1025FFG EGS2025FFG EGS3025FFG EGS3025AFG EGS4025FFG EGS4025AFG 30EGS1030FFG EGS2030FFG EGS3030FFG —EGS4030FFG —32EGS1032FFG EGS2032FFG EGS3032FFG EGS3032AFG EGS4032FFG EGS4032AFG 35EGS1035FFG EGS2035FFG EGS3035FFG —EGS4035FFG —40EGS1040FFG EGS2040FFG EGS3040FFG EGS3040AFG EGS4040FFG EGS4040AFG 45EGS1045FFG EGS2045FFG EGS3045FFG —EGS4045FFG —50EGS1050FFG EGS2050FFG EGS3050FFG EGS3050AFG EGS4050FFG EGS4050AFG 60EGS1060FFG EGS2060FFG EGS3060FFG —EGS4060FFG —63EGS1063FFG EGS2063FFG EGS3063FFG EGS3063AFG EGS4063FFG EGS4063AFG 70EGS1070FFG EGS2070FFG EGS3070FFG —EGS4070FFG —80EGS1080FFG EGS2080FFG EGS3080FFG EGS3080AFG EGS4080FFG EGS4080AFG 90EGS1090FFG EGS2090FFG EGS3090FFG —EGS4090FFG —100EGS1100FFG EGS2100FFG EGS3100FFG EGS3100AFG EGS4100FFG EGS4100AFG 125EGS1125FFG EGS2125FFG EGS3125FFG EGS3125AFG EGS4125FFG EGS4125AFG 160——EGS3160FFGEGS3160AFGEGS4160FFGEGS4160AFGEG-Framee s y of C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a f h .c o m2 2.2Molded Case Circuit BreakersSeries GEG-Frame—70/65Notes1 16, 32, 63A are not UL listed ratings.2 Adjustable thermal are not UL listed.3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on the LH side.Maximum Continuous Amps at 40°C 1Single-Pole Two-Pole Three-Pole Four-Pole 3Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable 2Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable 2Thermal, Fixed Magnetic Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number 15EGH1015FFG EGH2015FFG EGH3015FFG —EGH4015FFG —16EGH1016FFG EGH2016FFG EGH3016FFG —EGH4016FFG —20EGH1020FFG EGH2020FFG EGH3020FFG EGH3020AFGEGH4020FFG EGH4020AFG 25EGH1025FFG EGH2025FFG EGH3025FFG EGH3025AFG EGH4025FFG EGH4025AFG 30EGH1030FFG EGH2030FFG EGH3030FFG —EGH4030FFG —32EGH1032FFG EGH2032FFG EGH3032FFG EGH3032AFG EGH4032FFG EGH4032AFG 35EGH1035FFG EGH2035FFG EGH3035FFG —EGH4035FFG —40EGH1040FFG EGH2040FFG EGH3040FFG EGH3040AFG EGH4040FFG EGH4040AFG 45EGH1045FFG EGH2045FFG EGH3045FFG —EGH4045FFG EGH4050AFG 50EGH1050FFG EGH2050FFG EGH3050FFG EGH3050AFG EGH4050FFG —60EGH1060FFG EGH2060FFG EGH3060FFG —EGH4060FFG —63EGH1063FFG EGH2063FFG EGH3063FFG EGH3063AFG EGH4063FFG EGH4063AFG 70EGH1070FFG EGH2070FFG EGH3070FFG —EGH4070FFG —80EGH1080FFG EGH2080FFG EGH3080FFG EGH3080AFG EGH4080FFG EGH4080AFG 90EGH1090FFG EGH2090FFG EGH3090FFG —EGH4090FFG —100EGH1100FFG EGH2100FFG EGH3100FFG EGH3100AFG EGH4100FFG EGH4100AFG 125EGH1125FFGEGH2125FFGEGH3125FFGEGH3125AFGEGH4125FFGEGH4125AFGEG-Framee s y of C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a f h .c o m2EG-Frame—100/100 Current Limiting (Single-Pole and Two-Pole Unavailable)EG-Frame—100/100Molded Case Switches4Notes1 16, 32, 63A are not UL listed ratings.2 Adjustable thermal is not UL listed.3 Change the fourth digit to 7 for 100% neutral protection. Neutral is on LH side.4 Molded case switches may open above 1250A.Maximum Continuous Amps at 40°C 1Three-Pole Four-Pole 0% Protected Neutral 3Fixed Thermal, Fixed MagneticAdjustable 2Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Adjustable 2Thermal, Fixed Magnetic Catalog Number Catalog Number Catalog Number Catalog Number 15EGC3015FFG —EGC7015FFG —16EGC3016FFG —EGC7016FFG —20EGC3020FFG EGC3020AFG EGC7020FFG EGC7020AFG 25EGC3025FFG EGC3025AFG EGC7025FFG EGC7025AFG 30EGC3030FFG —EGC7030FFG —32EGC3032FFG EGC3032AFG EGC7032FFG EGC7032AFG 35EGC3035FFG —EGC7035FFG —40EGC3040FFG EGC3040AFG EGC7040FFG EGC7040AFG 45EGC3045FFG —EGC7045FFG —50EGC3050FFG EGC3050AFG EGC7050FFG EGC7050AFG 60EGC3060FFG —EGC7060FFG —63EGC3063FFG EGC3063AFG EGC7063FFG EGC7063AFG 70EGC3070FFG —EGC7070FFG —80EGC3080FFG EGC3080AFG EGC7080FFG EGC7080AFG 90EGC3090FFG —EGC7090FFG —100EGC3100FFG EGC3100AFG EGC7100FFG EGC7100AFG 125EGC3125FFGEGC3125AFGEGC7125FFGEGC7125AFGCatalog Number EGK3125KSG EGK7125KSG EGK3160KSG EGK7160KSGEG-Framee s y of C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w2EG Bolt-On Complete Breaker (Includes Frame, Trip Unit and Mounting Hardware)EG-Frame—18 kAIC at 480 VacEG-Frame—35 kAIC at 480 VacNotes1 For bulk pack 24, add suffix BP24 and order quantities of 24.2 For bulk pack 12, add suffix BP12 and order quantities of 12.3 For bulk pack 8, add suffix BP8 and order quantities of 8.Maximum Continuous Amps at 40°C Single-PoleTwo-PoleThree-PoleFixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Catalog Number 1Catalog Number 2Catalog Number 315EGB1015FFB EGB2015FFB EGB3015FFB 20EGB1020FFB EGB2020FFB EGB3020FFB 25EGB1025FFB EGB2025FFB EGB3025FFB 30EGB1030FFB EGB2030FFB EGB3030FFB 35EGB1035FFB EGB2035FFB EGB3035FFB 40EGB1040FFB EGB2040FFB EGB3040FFB 45EGB1045FFB EGB2045FFB EGB3045FFB 50EGB1050FFB EGB2050FFB EGB3050FFB 60EGB1060FFBEGB2060FFB EGB3060FFB 70EGB1070FFB EGB2070FFBEGB3070FFB 80EGB1080FFB EGB2080FFB EGB3080FFB 90EGB1090FFB EGB2090FFB EGB3090FFB 100EGB1100FFB EGB2100FFB EGB3100FFB 110EGB1110FFB EGB2110FFB EGB3110FFB 125EGB1125FFBEGB2125FFBEGB3125FFBMaximum Continuous Amps at 40°C Single-PoleTwo-PoleThree-PoleFixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Catalog Number 1Catalog Number 2Catalog Number 315EGS1015FFB EGS2015FFB EGS3015FFB 20EGS1020FFB EGS2020FFB EGS3020FFB 25EGS1025FFB EGS2025FFB EGS3025FFB 30EGS1030FFB EGS2030FFB EGS3030FFB 35EGS1035FFB EGS2035FFB EGS3035FFB 40EGS1040FFB EGS2040FFB EGS3040FFB 45EGS1045FFB EGS2045FFB EGS3045FFB 50EGS1050FFB EGS2050FFB EGS3050FFB 60EGS1060FFB EGS2060FFB EGS3060FFB 70EGS1070FFB EGS2070FFB EGS3070FFB 80EGS1080FFB EGS2080FFB EGS3080FFB 90EGS1090FFB EGS2090FFB EGS3090FFB 100EGS1100FFB EGS2100FFB EGS3100FFB 110EGS1110FFB EGS2110FFB EGS3110FFB 125EGS1125FFBEGS2125FFBEGS3125FFBEG-FrameEG-Frame e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w22.2Molded Case Circuit BreakersSeries GEG-Frame—65 kAIC at 480 VacLoad T erminalsNotes1 For bulk pack 24, add suffix BP24 and order quantities of 24.2 For bulk pack 12, add suffix BP12 and order quantities of 12.3 For bulk pack 8, add suffix BP8 and order quantities of 8.Maximum Continuous Amps at 40°C Single-PoleTwo-PoleThree-PoleFixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Fixed Thermal, Fixed Magnetic Catalog Number 1Catalog Number 2Catalog Number 315EGH1015FFB EGH2015FFB EGH3015FFB 20EGH1020FFB EGH2020FFB EGH3020FFB 25EGH1025FFB EGH2025FFB EGH3025FFB 30EGH1030FFB EGH2030FFB EGH3030FFB 35EGH1035FFB EGH2035FFB EGH3035FFB 40EGH1040FFBEGH2040FFB EGH3040FFB 45EGH1045FFB EGH2045FFB EGH3045FFB 50EGH1050FFB EGH2050FFB EGH3050FFB 60EGH1060FFB EGH2060FFB EGH3060FFB 70EGH1070FFB EGH2070FFB EGH3070FFB 80EGH1080FFB EGH2080FFB EGH3080FFB 90EGH1090FFB EGH2090FFB EGH3090FFB 100EGH1100FFB EGH2100FFB EGH3100FFB 110EGH1110FFB EGH2110FFB EGH3110FFB 125EGH1125FFBEGH2125FFBEGH3125FFBMaximum Breaker AmpsTerminal, Body MaterialWire TypeMetric Wire Range mm 2AWG Wire Range(Package of Three Terminals)Catalog NumberStandard Cu/Al Pressure T ype T erminals 15–50Aluminum Cu/Al 2.5–50#14–1/03TA125EF 60–125AluminumCu/Al16–70#6–3/03TA150EFEG-Framee s y of C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a f h .c o m2Accessories Selection Guide and Ordering InformationEG-FrameLine and Load T erminalsEG-Frame circuit breakers and molded case switches have line and load terminals as standard equipment.Insert collar enclosing conductor as shown. Locate nut on top of conductor and tighten securely with screw and washer.Caution : Collar must surround conductor.Insert collar enclosing conductor and center on extrusion. Tighten securely with screw and washer. Endcap kits are used on the E-Frame breaker line side to connect busbar or similar electrical connections. Includes hardware.Notes1Standard line and load terminals.2Four-pole kit with four terminals.3T125EF3TA125EF 3TA150EF 3TA160EFKEF2RTWK, Two-Pole–Metric EF3RTWK, Three-Pole–Metric EF4RTWK, Four-Pole–Metric EF2RTDK, Two-Pole–Imperial EF3RTDK, Three-Pole–Imperial EF4RTDK, Four-Pole–ImperialControl Wire Terminal Kit GCWTKMultiwire ConnectorsMaximum Breaker AmpsTerminal Body MaterialWire TypeMetric Wire Range mm 2AWG Wire Range(Package of Three Terminals)Catalog NumberStandard Cu/Al Pressure T ype T erminals 125Steel Al 4–6#12-103T125EF 1125Steel Cu 2.5–95#14-3/03T125EF 1125Aluminum Cu/Al 2.5–50#14-1/03TA125EF 160Aluminum Cu/Al 16–70#6-3/03TA150EF 160Aluminum Cu/Al 35–120#3-2503TA160EFK 160AluminumCu/Al35–120#3-2504TA160EFK2e s y of C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w2Control Wire T erminal KitFor use with steel or stainless steel standard line and load terminals only.Interphase BarriersThe interphase barrier is available for extended insulationbetween circuit breaker poles. Specify quantity when ordering.Base Mounting Hardware—DIN Rail MountingMetric base mounting hardware is included with a circuit breaker or molded case switch. (Included with breaker.) If required separately, order S/N 8703C80G08.Note: English mounting hardware kit can be supplied separate. Catalog number is BMHE #6–32 x 3 inches for two-, three- and four-pole. Single-pole mounting hardware metric order 8703C80G11. English hardware 8703C80G12. Both sold in quantities of 100.Terminal ShieldsThe terminal shield is available for line terminal areas in three- and four-pole circuit breakers. Special terminal shields are also available for use when an electrical (solenoid) operator ismounted on the circuit breaker. The standard style number by pole for each terminal shield is for a package of 10 and is priced per each package. Special terminal shields are packaged individually.T erminal Shields—IP30 ProtectionTerminal End Covers (Gas Barrier)The terminal end cover is available for three-pole circuit breakers only. Two conductor opening sizes are available. Specify quantity (one per circuit breaker) when ordering.T erminal End CoversMultiwire ConnectorsField-installed multiwire connectors for the load side (OFF) end terminals. They are used to distribute the load from the circuit breaker to multiple devices without the use of separate distribution terminal blocks.Multiwire lug kits include mounting hardware, terminal shield insulators and tin-plated aluminum connectors to replace three mechanical load lugs. UL listed as used on the load side (OFF) end.EG-Frame Multiwire Connectors Ordering Information (Package of 3) 1Note1For four-pole kit, change “3” at beginning of catalog number to “4.”Catalog NumberControl wire terminal kit 5652B38G01Package of 12—priced individuallyCatalog NumberInterphase barriersEIPBKPackage of 12—priced individuallyCatalog NumberDIN rail adapter—single-pole EF1DIN DIN rail adapter—two-pole EGDIN DIN rail adapter—three- or four-poleEF34DINNumber of Poles Catalog Number 3EFTS3K 4EFTS4KConductor Opening Diameter Inches (mm) Catalog Number 6.35 (0.25)EEC3K 10.41 (0.41)EEC4KMaximum Amperes Wires per Terminal Wire SizeRange AWG Cu Kit Catalog Number 125314–23TA125E3K 125614–63TA125E6Ke s y of C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w wV4-T2-26Volume 4—Circuit Protection CA08100005E—April 2AccessoriesAllowable Accessory CombinationsDifferent combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.EG-Frame AccessoriesLegend■ Applicable in indicated pole position❏ May be mounted on left or right pole—not both ● Accessory available/modification availableReference PageSingle-Pole Two-Pole Three-Pole Four-Pole DescriptionCenterLeftRightLeftCenterRightLeftCenterRightNeutralInternal Accessories(Only one internal accessory per pole)Alarm lockout (Make/Break)V4-T2-104——■——■——■—Alarm lockout (2Make/2Break)V4-T2-104——■——■——■—Auxiliary switch (1A, 1B)V4-T2-104——■——■——■—Auxiliary switch (2A, 2B)V4-T2-104——■——■——■—Auxiliary switch and alarm switch combination V4-T2-104——■——■——■—Shunt trip—standardV4-T2-104———■——■———Undervoltage release mechanism V4-T2-105———■——■———External Accessories End cap kitV4-T2-25—●●●●●●●●●Control wire terminal kit V4-T2-25●●●●●●●●●●Multiwire connectors V4-T2-25●●●●●●●●●●Base mounting hardware V4-T2-25●●●●●●●●●●Terminal shields V4-T2-25●●●●●●●●●●Terminal end covers V4-T2-25———●●●————Interphase barriersV4-T2-25—●●●●●●●●●Non-padlockable handle block V4-T2-102■■——■——■——Snap-on padlockable handle lock hasp V4-T2-102■■——■——■——Padlockable handle lock haspV4-T2-102——■❏—❏❏—❏—Walking beam interlock—requires two breakers V4-T2-102———●●●●●●●Plug-in adapters V4-T2-102—●●●●●●●●●Electrical operator V4-T2-102———●●●————Handle mechanismsV4-T2-407———●●●————Modifications (Refer to Eaton)Moisture fungus treatment V4-T2-100●●●●●●●●●●Freeze-tested circuit breakers—●●●●●●●●●●Marine/naval application, UL 489 Supplement SA and SB—●●●●●●●●●●C o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w wVolume 4—Circuit Protection CA08100005E—April V4-T2-272Technical Data and SpecificationsUL 489/IEC 60947-2 Interrupting Capacity (Symmetrical Amperes) (kA) RatingsDimensions and WeightsApproximate Dimensions in Inches (mm)EG-FrameEG-FrameApproximate Shipping Weight in Lbs (kg)EG-FrameNotes1DC ratings apply to substantially non-inductive circuits.2IEC only.3Two-pole circuit breaker, or two poles of three-pole circuit breaker.4Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 42 kA.5Current limiting per UL 489.Circuit Breaker Type Number of Poles Volts AC (50/60 Hz)Volts DC 1120220–240277347380–415480600Y/ 347690 2125250 34I cu I cs I cu I cs I cu I cs I cu I cs I cu I cs EGB125135252518———————1010——2, 3, 4—2525——181818—————1010EGE1252, 3, 4—3535——25252518————1010EGS125110085433522——————3535——2, 3, 4—8543——40303522————3535EGH1251200100506530——————4242——2, 3, 4—10050——70356525————4242EGC125 53, 4—200200——10010010035————4242EGB160 23, 4—2525——181818—————1010EGE160 23, 4—3535——25252518————1010EGS160 23, 4—8543——40303522————3535Number of Poles Width Height Depth 1 1.00 (25.4) 5.50 (139.7) 2.99 (75.9)2 2.00 (50.8) 5.50 (139.7) 2.99 (75.9)3 3.00 (76.2) 5.50 (139.7) 2.99 (75.9)44.00 (101.6)5.50 (139.7)2.99 (75.9)Breaker Type Number of Poles 1234Breaker Type Number of Poles 34EGB125 1.5 (0.68) 2.0 (0.91) 3.0 (1.36) 4.9 (1.82)EGB160 3.0 (1.36) 4.9 (1.82)EGC125 1.5 (0.68) 2.0 (0.91) 3.0 (1.36) 4.9 (1.82)EGE160 3.0 (1.36) 4.9 (1.82)EGE125 1.5 (0.68) 2.0 (0.91) 3.0 (1.36) 4.9 (1.82)EGS1603.0 (1.36)4.9 (1.82)EGH125 1.5 (0.68) 2.0 (0.91) 3.0 (1.36) 4.9 (1.82)EGS1251.5 (0.68)2.0 (0.91)3.0 (1.36)4.9 (1.82)Front View Three-PoleFront Cover CutoutSide View(33.0)C LC o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w wV4-T2-28Volume 4—Circuit Protection CA08100005E—April 2EG-Frame With Earth Leakage ModuleEG-Frame With Current Limiter ModuleC o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w。
天高微UTC7805.7806.7808.7809.7810.7812.7815.7818.7824
UTC78XX11.5A* UTC78XX TO-220 , 1.5A1.5A5V;6V;8V;9V;10V;12V;15V;18V;24VTO-2201: ; 2: ; 3:1(Ta=25°C)(Vo=5V to 18V) (Vo=24V)Vi 3540V V R θ JA 65°C/W JC 5°C/W Topr 0~ +125°CTstg-65 ~ +150°CUTC78XX2UTC7805( 0<Tj<125°C,Io=500mA,Vi=10V,Ci=0.33µF, Co=0.1µF)Tj=25°C4.85.0 5.2V Vo 5.0mA<Io<1.0A,Po<15W Vi=7.5V to 20V4.755.00 5.25V ∆Vo Tj=25°C,Vi=7.5V to 25V 4.0100mV Tj=25°C,Vi=8V to 12V 1.650mV ∆Vo Tj=25°C,Io=5.0mA to 1.5A 9100mV Tj=25°C,Io=250mA to 750mA 450mVIQ Tj=25°C5.08mA ∆IQ Io=5mA to 1.0A 0.030.5mA Vi=8V to 25V 0.30.8mA ∆Vo/∆T Io=5mA0.8mV/°C VN f=10Hz to 100kHz,Ta=25°C 42µV RR f=120Hz, Vi=8V to 18V 6273dB Vo Io=1.0A,Tj=25°C 2V Ro f=1kHz15m Ω Isc Vi=35V,Ta=25°C 230mAIpkTj=25°C2.2AUTC78060<Tj<125°C,Io=500mA,Vi=11V,Ci=0.33µF, Co=0.1µF)Tj=25°C5.756.00 6.25VVo 5.0mA<Io<1.0A,Po<15W Vi=8.5V to 21V5.76.06.3V∆Vo Tj=25°C,Vi=8.5V to 25V 5120mV Tj=25°C,Vi=9V to 13V1.560mV∆Vo Tj=25°C,Io=5.0mA to 1.5A 9130mV Tj=25°C,Io=250mA to 750mA360mVIQ Tj=25°C 5.08mA∆IQ Io=5mA to 1.0A 0.5mA Vi=9V to 25V0.8mA∆Vo/∆T Io=5mA 0.8mV/°CVN f=10Hz to 100kHz,Ta=25°C 45µVRR f=120Hz, Vi=9V to 19V 5975dBVo Io=1.0A,Tj=25°C 2VRo f=1kHz 19m ΩIsc Vi=35V,Ta=25°C 250mAIpk Tj=25°C 2.2AUTC78XX3UTC78080<Tj<125°C,Io=500mA,Vi=14V,Ci=0.33µF, Co=0.1µF)Tj=25°C7.78.08.3VVo 5.0mA<Io<1.0A,Po<15W Vi=11V to 23V7.68.08.4V∆Vo Tj=25°C,Vi=10.5V to 25V 5.0160mV Tj=25°C,Vi=11V to 17V2.080mV∆Vo Tj=25°C,Io=5.0mA to 1.5A 10160mV Tj=25°C,Io=250mA to 750mA5.080mVIQ Tj=25°C 5.08mA∆IQ Io=5mA to 1.0A 0.050.5mA Vi=11V to 25V0.5 1.0mA∆Vo/∆T Io=5mA 0.8mV/°CVN f=10Hz to 100kHz,Ta=25°C 52µVRR f=120Hz, Vi=11.5V to 21.5V 5673dBVo Io=1.0A,Tj=25°C 2VRo f=1kHz 17m ΩIsc Vi=35V,Ta=25°C 230mAIpk Tj=25°C 2.2AUTC78090<Tj<125°C,Io=500mA,Vi=15V,Ci=0.33µF, Co=0.1µF)Tj=25°C8.659.009.35VVo 5.0mA<Io<1.0A,Po<15W Vi=11.5V to 24V8.69.09.4V∆Vo Tj=25°C,Vi=11.5V to 25V 6180mV Tj=25°C,Vi=12V to 25V290mV∆Vo Tj=25°C,Io=5.0mA to 1.5A 12180mV Tj=25°C,Io=250mA to 750mA490mVIQ Tj=25°C 5.08mA∆IQ Io=5mA to 1.0A 0.5mA Vi=12V to 26V 0.8mA∆Vo/∆T Io=5mA 1mV/°CVN f=10Hz to 100kHz,Ta=25°C 58µVRR f=120Hz, Vi=13V to 23V 5671dBVo Io=1.0A,Tj=25°C 2VRo f=1kHz 15m ΩIsc Vi=35V,Ta=25°C 250mAIpk Tj=25°C 2.2AUTC78XX4UTC7810,0<Tj<125°C,Io=500mA,Vi=16V,Ci=0.33µF, Co=0.1µF)Tj=25°C9.61010.4VVo 5.0mA<Io<1.0A,Po<15W Vi=12.5V to 25V9.51010.5V∆Vo Tj=25°C,Vi=12.5V to 25V 10200mV Tj=25°C,Vi=13V to 20V3100mV∆Vo Tj=25°C,Io=5.0mA to 1.5A 12200mV Tj=25°C,Io=250mA to 750mA4100mVIQ Tj=25°C 5.08mA∆IQ Io=5mA to 1.0A 0.5mA Vi=13V to 29V0.8mA∆Vo/∆T Io=5mA 1mV/°CVN f=10Hz to 100kHz,Ta=25°C 58µVRR f=120Hz, Vi=14V to 24V 5671dBVo Io=1.0A,Tj=25°C 2VRo f=1kHz 17m ΩIsc Vi=35V,Ta=25°C 250mAIpk Tj=25°C 2.2AUTC78120<Tj<125°C,Io=500mA,Vi=16V,Ci=0.33µF, Co=0.1µF)Tj=25°C11.512.012.5VVo 5.0mA<Io<1.0A,Po<15W Vi=14.5V to 27V11.41212.6V∆Vo Tj=25°C,Vi=14.5V to 30V 10240mV Tj=25°C,Vi=16V to 22V3120mV∆Vo Tj=25°C,Io=5.0mA to 1.5A 11240mV Tj=25°C,Io=250mA to 750mA5.0120mVIQ Tj=25°C 5.18mA∆IQ Io=5mA to 1.0A 0.5mA Vi=15V to 30V0.8mA∆Vo/∆T Io=5mA 1mV/°CVN f=10Hz to 100kHz,Ta=25°C 76µVRR f=120Hz, Vi=15V to 25V 5571dBVo Io=1.0A,Tj=25°C 2VRo f=1kHz 18m ΩIsc Vi=35V,Ta=25°C 230mAIpk Tj=25°C 2.2AUTC78XX5UTC78150<Tj<125°C,Io=500mA,Vi=23V,Ci=0.33µF, Co=0.1µF)Tj=25°C14.415.015.6VVo 5.0mA<Io<1.0A,Po<15W Vi=17.5V to 30V14.251515.75V∆Vo Tj=25°C,Vi=17.5V to 30V 11300mV Tj=25°C,Vi=20V to 26V3150mV∆Vo Tj=25°C,Io=5.0mA to 1.5A 12300mV Tj=25°C,Io=250mA to 750mA4150mVIQ Tj=25°C 5.28mA∆IQ Io=5mA to 1.0A 0.5mA Vi=18V to 305V0.8mA∆Vo/∆T Io=5mA 1mV/°CVN f=10Hz to 100kHz,Ta=25°C 90µVRR f=120Hz, Vi=18.5V to 28.5V 5470dBVo Io=1.0A,Tj=25°C 2VRo f=1kHz 19m ΩIsc Vi=35V,Ta=25°C 250mAIpk Tj=25°C 2.2AUTC78180<Tj<125°C,Io=500mA,Vi=23V,Ci=0.33µF, Co=0.1µF)Tj=25°C17.318.018.7VVo 5.0mA<Io<1.0A,Po<15W Vi=21V to 33V17.11818.9V∆Vo Tj=25°C,Vi=21V to 33V 15360mV Tj=25°C,Vi=24V to 30V5180mV∆Vo Tj=25°C,Io=5.0mA to 1.5A 15360mV Tj=25°C,Io=250mA to 750mA5.0180mVIQ Tj=25°C 5.28mA∆IQ Io=5mA to 1.0A 0.5mA Vi=21V to 32V0.8mA∆Vo/∆T Io=5mA 1mV/°CVN f=10Hz to 100kHz,Ta=25°C 110µVRR f=120Hz, Vi=22V to 32V 5369dBVo Io=1.0A,Tj=25°C 2VRo f=1kHz 22m ΩIsc Vi=35V,Ta=25°C 250mAIpk Tj=25°C 2.2AUTC78XX6UTC78240<Tj<125°C,Io=500mA,Vi=33V,Ci=0.33µF, Co=0.1µF)Tj=25°C232425VVo 5.0mA<Io<1.0A,Po<15W Vi=27V to 38V22.82425.2V∆Vo Tj=25°C,Vi=27V to 38V 17480mV Tj=25°C,Vi=30V to 36V6240mV∆Vo Tj=25°C,Io=5.0mA to 1.5A 15480mV Tj=25°C,Io=250mA to 750mA5.0240mVIQ Tj=25°C 5.28mA∆IQ Io=5mA to 1.0A 0.5mA Vi=27V to 38V0.8mA∆Vo/∆T Io=5mA 1.5mV/°CVN f=10Hz to 100kHz,Ta=25°C 160µVRR f=120Hz, Vi=28V to 38V 5067dBVo Io=1.0A,Tj=25°C 2VRo f=1kHz 28m ΩIsc Vi=35V,Ta=25°C 230mAIpk Tj=25°C 2.2A30 s1 23UTC78XX7456 7R sc =VBE Q2/ IscIo=I R EG *(I REG -VBE Q1/R1)R1=VBE Q1/I REQ -I Q1*Q18 9UTC78XX810 11 (±15V,1A)12 13UTC78XX9-50-25255075100125((m A )-50-25255075100125((V )1015202530355(A )j =25o=10m V 0101520253035556.74(V)(m A )UTC78XX10UTC78XX 1105.06.30V1.1 ” ”11005.09.09 V1.2 ”10。
北斗空间信 接口控制文件
2017 中国卫星导航系统管理办公室
5.2.1 B1C 信号主码 ......................................................10 5.2.2 B1C 信号子码 ......................................................14 5.3 B2a 信号测距码.................................................................16 5.3.1 B2a 信号主码.......................................................16 5.3.2 B2a 信号子码.......................................................21 5.4 非标准码 ............................................................................23 6 导航电文结构 ............................................................................23 6.1 导航电文概述 ....................................................................23 6.1.1 导航电文类型定义 ..............................................23 6.1.2 校验码 ..................................................................24 6.2 B-CNAV1 导航电文 ..........................................................24 6.2.1 基本描述 ..............................................................24 6.2.2 编码方案和编码参数 ..........................................26 6.2.3 编排格式 ..............................................................31 6.3 B-CNAV2 导航电文 ..........................................................36 6.3.1 基本描述 ..............................................................36 6.3.2 编码方案和编码参数 ..........................................37 6.3.3 编排格式 ..............................................................38 7 导航电文参数和算法 ................................................................41 7.1 测距码编号 ........................................................................41 7.2 页面类型 ............................................................................41 7.3 信息类型 ............................................................................41 7.4 系统时间参数 ....................................................................42 7.5 电文数据版本号 ...................................................文件
UTC LOCAL TIME - FLIGHT TIME ELAPSED TIME 数字时钟说明书
LED Displays: Sunlight readable. Battery Type: CR2032. Polarizing Filter. Input Current: .2 Amps.
Input Voltage: 11 to 30 Volts Weight: 5 ounces MAX. Warranty: 1 year.
total time up to 99 hours. Normally it is recommended that the Flight Time recorder be zeroed on the pre start up check list of the aircraft. The Flight Time can be zeroed by holding switch to ZERO for 3 seconds.
FEATURES Toggle button control system is natural. Bright sunlight readable LED displays. Local Time 12 or 24 hour format Flight Time recorded in hours and minutes
ELAPSED TIME METER
When the Elapsed Time channel is selected the Elapsed Time meter will read in hours, minutes, and seconds. This recorder is fully controlled by the pilot from the front panel. It may be started, stopped and returned to zero for elasped time, approach, time, etc. Total time up to 99 hours.
数字卫星接收机解密大全
1、亚视达5288（海克威）：（1）首先按遥控器“MENU”键进入系统设置，按“OK”进入。
（2）进入“系统设置”，选择“默认设置”。
（3）画面出现“恢复默认设置”框，先按遥控器静音键，再按遥控器方向“上”键，这时画面出现“请输入密码”框，输入密码1270即可。
2、亚视达2688：进入默认设置中，按静音键即可。
3、卓异ZY5518Y（东方龙、小飞鸽、小孔雀、小帅哥等）盲扫功能：按遥控菜单键。
出现卓异主菜单时，虽然画面没有提示，便只要输入密码即可，可输入以下几组密码：309700、5168、1698、305518。
因不同批次的机器密码是不是同的，可以逐个一试。
如果正确，会有“出厂参数恢复，请稍等”的提示。
这步完成再按自动搜索，确认即可进入盲扫。
4、卓异→飞天龙：密码1234。
5、通达：节目加→按音量减键4次→静音即可。
6、小神童、挑战者等：恢复出厂设置→确认，输入6678即可。
7、经天、威乐士2288，年华、沧浪等：恢复出厂设置→确认→静音→节目7065即可。
8、跃佳航天等：恢复出厂设置→确认→静音→节目加→7065；菜单按静音键5秒钟→屏幕显示“数据存储中”即可。
9、创维DVB-SOI工程机：密码13572468。
10、创维高级用户的开启密码：13572468。
11、RCA-993S密码：6931。
12、天域密码：1001。
13、DX680密码：0000。
14、长虹万能码：138168。
15、同洲5288的进入方法：打开主菜单→进入转发器设置→依次按声道键→信息键→00000。
16、同洲3188CSE：菜单→节目设置→节目加→信息键→声道键。
密码0000。
17、同洲5288等：菜单→输入156988即可。
18、海克威5688新版机盲扫密码：0000，老版机密码：127019、海克威（天王星）：在恢复出厂时按静音键输入127020、海克威HIC-3288C进入主菜单，用遥控器数字键输入1270即可。
12-北斗-全球卫星导航系统(GNSS)定时单元性能要求及测试方法BD420006-2015介绍
BD 420006—2015北斗/全球卫星导航系统（GNSS） 定时单元性能要求及测试方法Performance requirements and test methods forBeiDou/Global Navigation Satellite Systems (GNSS) timing unit2015-11-01实施2015-10-19 发布目次前言 .............................................................................................................................................................. I II1 范围 (1)2 规范性引用文件 (1)3 术语和定义、缩略语 (1)3.1 术语和定义 (1)3.2 缩略语 (3)4 要求 (4)4.1 总则 (4)4.2 组成 (4)4.3 功能 (4)4.4 性能 (5)4.5 接口 (8)4.6 环境条件 (11)5 测试方法 (12)5.1 测试环境条件 (12)5.2 测试信号 (12)5.3 测试设备 (12)5.4 测试场地 (12)5.5 功能测试 (12)5.6 性能测试 (13)附录A（规范性附录） IRIG-B码码元定义及波形 (22)参考文献 (27)前言为适应我国卫星导航发展对标准的需要，全国北斗卫星导航标准化技术委员会组织制定北斗专项标准，推荐有关方面参考采用。
本标准由中国卫星导航系统管理办公室提出。
本标准由全国北斗卫星导航标准化技术委员会归口。
本标准起草单位：中国科学院国家授时中心、中国卫星导航工程中心、中国航天标准化研究所、中国电子科技集团公司第二十研究所、郑州威科姆科技股份有限公司。
本标准主要起草人：胡永辉、吴海玲、武建锋、张向波、宋成、王如龙、何在民、吴华兵、杨玉清、王康、王维嘉、吕宏春。
VICTOR1802卫星授时远程高压核相仪说明书
4．卫星远程核相操作............................................................................................. 7
1）搜索卫星......................................................................................................7
目
录
注意.................................................................................................................................... 1
一．简介................................................................................................................................................................................................................................ 6
1. 探测器开关机....................................................................................................6
VICTOR1802 卫星授时远程高压核相仪由 2 套仪器组成，每套仪器包括主机、X 探测器,Y 探测器、伸缩绝缘杆、监测软件、USB 通讯线等，主机采用 3.5 寸真彩液 晶屏，可以同屏显示相位、频率、相序及核相结果；向量图指示、相位指示，清晰 直观；具有“X 信号正常、Y 信号正常、同相、异相”等语音提示功能，使测试更简 单轻松。
船舶数据处理中自整角机角位移信号采集的方法
船舶数据处理中自整角机角位移信号采集的方法自整角机是船舶自动化系统中常用的设备，用于测量船舶在航行中的姿态角度，并将其转换为数字信号输出，供导航系统、控制系统等使用。
在船舶数据处理中，自整角机的角位移信号采集是非常重要的一环，本文将介绍船舶数据处理中自整角机角位移信号采集的方法。
一、自整角机角位移信号的基本特征自整角机的角位移信号是一种模拟信号，一般采用±10V的电压信号表示，其基本特征如下：1. 角度范围：通常为±45度至±90度之间，不同型号的自整角机角度范围有所差异。
2. 分辨率：通常为0.01度至0.005度之间，分辨率越高，角位移信号的采集精度越高。
3. 频率响应：一般为DC至10Hz之间，不同型号的自整角机频率响应也有所差异。
自整角机角位移信号的采集方式一般有两种：直接采集和间接采集。
1. 直接采集直接采集是指将自整角机的角位移信号通过电缆连接到数据采集设备上，然后将其直接采集到计算机或数据处理系统中。
这种方式采集的信号精度较高，但需要专门的数据采集设备和连接电缆，成本较高。
间接采集通常通过信号变换器实现，信号变换器是一种将模拟信号转换成数字信号的设备，可将自整角机的角位移信号转换为0-10V或4-20mA的模拟信号，然后通过模拟/数字转换器将其转换为数字信号，最终采集到计算机或数据处理系统中。
自整角机角位移信号的校准方法主要包括零点校准和斜率校准两种。
1. 零点校准零点校准是指将自整角机在零位时输出的电压信号调整为标准值，一般为0V或1V。
零点校准的方法是将自整角机放置在水平位置，然后用万用表或示波器测量其角度输出信号，并用螺丝刀或电位器调整自整角机的零点，使输出电压信号达到标准值。
2. 斜率校准总之，自整角机角位移信号的采集和校准是船舶数据处理中至关重要的一环，可影响到船舶导航、控制等系统的准确性和稳定性。
因此，在采集和校准自整角机角位移信号时，应严格按照相关规范和方法操作，以确保数据的准确性和可靠性。
NMEA-0183
GPS固定数据输出语句，这是一帧GPS定位的主要数据，也是使用最广的数据。
$GPGGA,<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>,<10>,<11>,<12>,<13>,< 14>*<15><CR><LF><1> UTC时间，格式为hhmmss.sss。
<2> 纬度，格式为ddmm.mmmm（前导位数不足则补0）。
<3> 纬度半球，N或S（北纬或南纬）。
<4> 经度，格式为dddmm.mmmm（前导位数不足则补0）。
<5> 经度半球，E或W（东经或西经）。
<6> 定位质量指示，0=定位无效，1=定位有效。
<7> 使用卫星数量，从00到12（前导位数不足则补0）。
<8> 水平精确度，0.5到99.9。
<9> 天线离海平面的高度，-9999.9到9999.9米<10> 高度单位，M表示单位米。
<11> 大地椭球面相对海平面的高度（-999.9到9999.9）。
<12> 高度单位，M表示单位米。
<13> 差分GPS数据期限（RTCM SC-104），最后设立RTCM传送的秒数量。
<14> 差分参考基站标号，从0000到1023（前导位数不足则补0）。
<15> 校验和。
GPGSAGPS精度指针及使用卫星格式$GPGSA,<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>,<10>,<11>,<12>,<13>,< 14>,<15>,<16>,<17>*<18><CR><LF><1> 模式2：M = 手动， A = 自动。
利用亿佰特GPS卫星定位模块校准系统时间
【技术分享】利用卫星校准系统时间一般获取精准时间的方式有两种，第一种就是从NTP服务器上获取，第二种则是通过卫星获取UTC时间，对于不能联网的设备若想通过NTP协议获取时间就只能通过外接支持UDP 传输的网络模块，比如串口服务器。
若设备支持卫星定位则可通过获取卫星的UTC时间来获取准确时间，对于需要使用北京时间的设备则需要通过换算。
UTC就是协调世界时，又称世界统一时间、世界标准时间、国际协调时间，北京位于东八区比UTC时间快8小时的时区。
下面小编将通过Modbus卫星定位模块获取UTC时间并通过MCGS脚本转换东八区时间再通过Modbus协议修改PLC的RTC时钟。
卫星定位模块采用EBYTE的E108-D01，一款支持多模定位并且支持UTC时间查询的Modbus RTU从机，下表为E108-D01寄存器表截取的本案例会使用到的寄存器，寄存器直接存储的UTC时间，需要+8小时换算成北京时间；时间运算不能是简单地加8小时，需要考虑大小月与闰年，以及时间计算的进位处理，比较复杂，MCGS脚本支持时间戳转换，则可以将获取的UTC时间转换为时间戳，在加上8小时（时间戳计算需要使用秒，8小时等于28800秒），再转换为其他格式的时间数据，使用时间戳计算可以忽略大小月、闰年等复杂的时间处理过程。
有些PLC也支持通过时间戳配置RTC时间，有些则需要使用BCD或者普通的数值。
TM221可以通过BCD码利用存储字和存储位配置系统字（%SW49-%SW53）结合系统位（%S50），下图就可以看出利用系统字和系统位配置时间比较复杂；TM221也可以通过PLC 组态软件中的“功能块”的RTC 功能修改，这里小编就通过这种方式修改PLC 的RTC 时间；MCGS 使用最便宜的TPC7062TX ，该设备具有两个串口，一个RS485(COM2)接口，一个RS232接口(COM2)接口，引脚定义这里就不再说明，不知道的可以到MCGS 官网查询。
统一时钟系统询价参数
5.外形尺寸：430x155x60mm
6.LED显示屏可视视角：≥±65º；
7.LED显示屏MT9.MTBF：≥6万小时；
7
台
3
车载扩展子钟
（无线同步时钟）
1.时钟源：CDMA信号；
2.功率： 1.5-5W，电压110-240V，50HZ ；
2
台
4
全网时间同步软件
1.可运行在网内任意计算机WINDOWS系统上；
2.可查看网内所有客户端的同步情况（仅限有线设备）；
3.可统计时间用户终端同步授时精度：<50ms，超过门限可以告警；
1
套
5
其他
1.系统和设备的安装、调试及相关人员的培训。
1
项
3.工作温度：-20~70℃；
4.存储温度：-40℃~+70℃
5.工作湿度：5%~95% RH
6.LED采用2.3寸红色数码管；
7.外形尺寸：410x100x40mm
8.LED显示屏可视视角：≥±65º；
9.LED显示屏MTBF：≥30000小时；
10.独立计时精度：≤±0.5秒/天
11.MTBF：≥6万小时；
7.支持协议：NTP v1.v2.v3(RFC1119&1305)，
SNTP（RFC2030, 1321）, HTTP, IPV4/IPV6，SNMP
8.支持双机热备
1
台
2
院内扩展子钟
（无线同步时钟）
1.时钟源：CDMA信号
2.功率： 1.5-5W，电压110-240V，50HZ ；
3.工作温度：-20~70℃；
统一时钟系统询价参数
序号
光波表时区代码
光波表时区代码1. 什么是光波表时区代码？光波表时区代码是指用于标识地球上不同时区的一种编码系统。
随着全球化的发展，人们需要在不同的地区进行时间的统一和比较，因此光波表时区代码应运而生。
每个时区都有一个唯一的代码，用于表示该时区相对于协调世界时（UTC）的时间偏移量。
2. 光波表时区代码的组成光波表时区代码由若干部分组成，包括字母、数字和符号。
下面是一个典型的光波表时区代码的示例：•时区代码：CST（China Standard Time）•UTC偏移量：+8•时区名称：中国标准时间3. 光波表时区代码的作用光波表时区代码的主要作用是标识不同地区的时间偏移量，方便人们进行时间的统一和比较。
通过使用光波表时区代码，人们可以轻松地将一个地区的时间转换为另一个地区的时间，避免了因时差带来的混淆和误解。
此外，光波表时区代码还在国际交流、航空航海等领域发挥着重要的作用。
4. 光波表时区代码的应用光波表时区代码广泛应用于各个领域，下面是一些常见的应用场景：4.1 国际交流在国际交流中，光波表时区代码是不可或缺的。
不同国家和地区的人们使用不同的时区代码，通过统一的编码系统，可以方便地协调各个地区的时间，避免因时差而导致的误解和混乱。
4.2 航空航海航空航海是一个全球性的行业，不同地区的飞机和船只需要进行时间的统一和比较。
光波表时区代码在航空航海中起到了至关重要的作用，航班时刻表和航海图中都会标注相应的时区代码，方便航空人员和船员进行时间的计算和调整。
4.3 跨时区的商务活动随着全球化的发展，越来越多的企业进行跨国经营和跨时区的商务活动。
光波表时区代码在这些商务活动中起到了关键的作用，帮助企业协调不同地区的工作时间，提高工作效率和协作能力。
4.4 跨时区的旅行和旅游对于喜欢旅行和旅游的人们来说，光波表时区代码也非常重要。
在计划旅行行程时，需要考虑不同地区的时差，以确保能够合理安排时间，并避免因时差而导致的不适和困惑。