交通运输专业英语练习题5

Questions for discussion
1. How many aspects are regulated in this code?
2. Which standards must be followed in engine components modification?
3. What should be guarded to minimize the danger to any person working on the vehicle with the engine running? 4. What is the fuel hose pressure rating regulation in fuel system modification?
Questions for discussion
1. Why does the industry have vehicle recycling process?
2. How many steps of the process of recycling a vehicle?
3. What are the policies of vehicle recycling around the world?
Fill in the blank according to the text 1. The process of recycling a vehicle is extremely complicated as there are many parts to be recycled and many ____ materials to remove. 2. Before the 2003 model year, some vehicles that were ____ were found to contain mercury auto ____, historically used in convenience lighting and antilock braking systems.
Questions for discussion 1. How many styles are there in modification? 2. What a rat rod style? 3. What can be modified in car tuning? 4. What can be improved through the body modification?
2. The design and construction of the engine ____ must be adequate to withstand the torque output of the engine and the inertial forces from ____, braking and cornering.
3. The essence of ____ of a tuner car is an attempt to extract the greatest possible performance. 4. Body tuning ____ adding or modifying spoilers and a body kit in order to improve the ____ performance of a vehicle.
Fill in the blank according to the text 1. Modified cars can be significantly different from their stock ____. 2. The characteristics specific to cultures, ____ and media, such as Boy racers and film specific cars.
3. If a vehicle is ____on the roadside or in empty lots, licensed dismantlers in the United States can legally obtain them so that they are safely converted into reusable or recycled ____.
Fill in the blank according to the text
1. A manufacturer’s standard or optional engine should be selected and installed using all the ____ components for that vehicle model.
3. The vacuum ____ between the brake booster (where fitted) and the inlet manifold must be securely fastened at each end using hose clamps or similar. 4. Electrical wires in ____ looms must be protected from mechanical damage by wrapping with tape or enclosing them in conduit, or other covering.