0878311631;中文规格书,Datasheet资料

合集下载

744230181;中文规格书,Datasheet资料

2.1 2.0 1.02012-07-172012-07-172010-09-30SStSStSBaSStSBaWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-CNSWof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Cleaning solvents which are used to clean the application might damage or change the characteristics of the component.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The soldering profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be su-stained.•All products are supposed to be used before the end of the period of 12 months based on the transfer of title, if not a 100% solderability can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744230181。

744314047;中文规格书,Datasheet资料

Bezeichnung :description :Marking = part numberEigenschaften /properties Lerrlaufinduktivität/initial inductance Nenn-Induktivität /33% Umgebungstemperatur / temperature:+20°CWE-Superflux ME08-01-01ME 06-09-27NameDatum / dateArbeitstemperatur / operating temperature: -40°C - +150°C Metra HIT 27I für/for R DCFreigabe erteilt / general release:Kunde / customerF Werkstoffe & Zulassungen / material & approvals :Würth Elektronik..................................................................................G Eigenschaften / general specifications :not exceed 150°C under worst case operating conditions.It is recommended that the temperature of the part does coating:blackHP 34401 A & Fluke 54II für/for I DC; Luftfeuchtigkeit / humidity:WAYNE KERR 3260B für/for L 0; I SAT Elektrische Eigenschaften / electrical properties :Umgebungstemp. / ambient temperature: -40°C - +100°C Basismaterial / base material:Draht / wire: AIEIW-200 D Prüfgeräte / test equipment :http://www.we-online.deDatum / date..................................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked .................................................................................................POWER-CHOKE WE-HCIE Testbedingungen / test conditions :Änderung / modificationVersion 1Version 2Bezeichnung :description :H Induktivitätskurve / Inductance curve :ME08-01-01ME 06-09-27NameDatum / dateD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGVersion 2..............................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth Elektronik....................................................................................................................................................................Freigabe erteilt / general release:Kunde / customerPOWER-CHOKE WE-HCIDATUM / DATE : 2008-01-01Bezeichnung :description :I Temperaturanstieg / Temperature rise curve :ME08-01-01ME 06-09-27NameDatum / dateWürth ElektronikVersion 2..........................................................................................................................................Freigabe erteilt / general release:Kunde / customerDatum / dateUnterschrift / signature...............................................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGBezeichnung :description :a 330,0± 2,0mmb 21,0± 0,8mmc 13,00± 0,5mmd 100,0± 1,5mmME08-01-01ME 06-09-27NameDatum / dateD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGVersion 2................................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth Elektronik....................................................................................................................................................................Freigabe erteilt / general release:Kunde / customerRollenspezifikation / Reel specification:SPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIThe Force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 744314047。

575-8;575-4;6092;6091;476-2;中文规格书,Datasheet资料

1BANANA JACKSTel (718)956-8900•Fax (718)956-9040(800)221-5510•kec@31-0720th Road –Astoria,NY 11105-2017RoHS COMPLIANT ~ISO 9001CERTIFIED®MATERIAL:Spring:Beryllium Copper Body:Brass,Silver PlateCAT.NO.452MATERIAL:Spring:Beryllium Copper,Nickel Plate Body:Brass,Nickel Plate Handle:Nylon.120(3.0)Plug.120(3.0)Plug.603 [15.3].153 [3.9]DIA..187 [4.8]DIA..110 [2.8].094 [2.39].078 [1.98]DIA..120 [3.1]DIA..290 [7.4].050 [1.27] DIA.TO ACCEPTWIRE..190 [4.9]DIA..104 [2.7] DIA..440 [11.2].480 [12.2].120 [3.1] DIA..290 [7.4]CAT.NO.COLOR 6076RED 6077BLACK 451NONESOLDER CONNECTIONSWAGE MOUNT MATERIAL:Body:Brass,Nickel Plate Terminal:Copper,TinnedAccepts .120(3.0)Plug.550[14.0].062 [1.57].312 [7.9]HEX..250 [6.4].106 [2.7]DIA.THRU10-32 THREADNUTTERMINAL MATERIAL:Body:Brass,Nickel Plate Terminal:Copper,Tinned Hex Head:PhenolicMATERIAL:Current Rating:15Amps Body:Brass,Nickel Plate Terminal:Brass,Tin PlateMATERIAL:Brass,Tin PlateMATERIAL:Body:NylonContact:Brass,Tin PlateCAT.NO.6096MATERIAL:Brass,Nickel PlateCAT.HEAD NO.COLOR 6093RED 6094BLACKCAT.NO.COLOR 6091RED 6092BLACKCAT.NO.6095STANDARDFULLY INSULATED Fits panel up to .375(9.6)CAT.NO.L 575-4.218(5.5)575-6.265(6.7)575-8.350(8.9)CAT.NO.L 476-2.125(3.2)476-3.165(4.2)476-4.187(4.7)Accepts .120(3.0)PlugAccepts .175(4.5)PlugFits panel up to .312(7.9)Accepts .175(4.5)PlugMATERIAL:Current Rating:15Amps Body:Brass,Nickel Plate Terminal:Brass,Tin PlateAccepts .175(4.5)PlugAccepts .175(4.5)PlugNON-INSULATED MINIATURE JACKMINIATUREINSULATED SOLDER CONNECTIONCAT.NO.6090.562[14.3].500[12.7].437[11.1].156[4.0].163[4.2]DIA.THRU.250-28 THREADNUTTERMINAL MOLDED HEX HEADFLAT WASHER SHOULDER WASHER.375 [9.5].406 [10.3].093 [2.36].163 [4.2] DIA.THRU.250-32 THREADTERMINALNUT.312[7.9].500 [12.7].375 [9.5]NUT.125 [3.2]TERMINALNUT.250-32 THREAD.163 [4.2] DIA.THRU.135 [3.5]DIA.L.075[1.91].218[5.6]DIA..106 [2.7]DIA.THRU.203 [5.2]DIA..093 [2.36].312 [7.9]DIA..163 [4.2] DIA.THRUL.182[4.6].937[23.8].433[11.0]DIA..187[4.8].234[6.0].468[11.9].093[2.36]DIA..312-32THREAD NUT Supplied with hardware UnassembledSupplied with nut and lug.UnassembledSupplied with lug and nut.UnassembledSupplied with nut and lug.UnassembledNON-INSULATEDAccepts .175(4.5)PlugNON-INSULATED STANDARD HEADNON-INSULATED RECESSED HEAD分销商库存信息:KEYSTONE-ELECTRONICS575-8575-46092 6091476-2476-4 575-660766077 60946093。

19218;中文规格书,Datasheet资料

Jewel ® Workstation Continuous Mini Monitor DescriptionWorkstation Continuous Mini Monitor Figure 1. Desco 19218 Jewel ® Workstation Continuous Made in AmericaA broken wrist strap may expose products to ESD over an entire shift if it is checked only at shift changeESD MATPush and Clinch Snaps1-5/16"Figure 2. Installation of push and clinch snaps to worksurfaceNOTE: Install the monitor to the worksurface by aligning one snap at a time and applying a downward force directly above that snap.WorksurfaceMonitors worksurface connectionFigure 3. Installation of the monitor to the worksurface one snap at a timeThe following procedure will outline how to correctly wire Workstation Continuous Mini Monitor so as to properly monitor an ESD protected workstation.1. Confirm that the worksurface surface resistance is 5 x 10E8 Ohms or less and has a conductive layer.2. A convenient 120 VAC outlet should be located and tested for proper wiring and grounding. Werecommend the Desco 98130 AC Outlet Analyzer to verify proper wiring and ground.AC AdapterESD MATPark SnapFigure 4. Operating the Jewel® Workstation ContinuousHand Lotion. When leaving the area, a person can take the coil cord along or leave it attached to themonitor in park position.NOTE: Removing the banana plug from the monitor’s operator jack will disable the audio alarm.It is recommended that you use the Park Snap rather than continuously removing the Banana Plug from its jack. Doing so will increase the life span of the operator jack. If your process requires the constant insertion and removal of the banana plug, please contact your Desco Representative for alternate solutions.Specifications:Test range of monitored circuit:500K - 10M ohms†Worksurface Limit*:Set to 500 Megohms ± 20%Operating Voltage:24VAC, 50-60 HzWrist strap open circuit voltage:1.2 Volts peak to peak @ 1-2 MicroAmpsMat test open circuit voltage:5 - 7.5 VoltsResponse time to alarm:<50 mSOperating Temperature:32ºF - 100ºFHumidity Range:0-95% RH, non- c ondensingDimensions:2.77" L x 2.07" W x .71" H† This cannot be verified with standard DC test equipment. The continuous monitor is an impedance sensing device and the limits are determined by the magnitude and angle of the impedance.*Contact factory for special limits.NOTE: Worksurface must have a conductive layer such as Dual Layer Rubber or Dissipative 3-Layer Vinyl or Micastat® Dissipative Laminate with conductive buried layers. Desco continuous monitors are not recommended for use with homogeneous matting.Maintenance and CalibrationThe Jewel® Workstation Continuous Mini Monitor is solid state and designed to be maintenance free. It is calibrated to NIST traceable standards. There are no user adjustments necessary. Because of the wave distortion impedance sensing nature of the test circuit, special equipment is required for calibration. We recommend that calibration be performed annually using the Desco 98220 Continuous Monitor Calibration Unit. The Calibration Unit is a most important product which allows the customer to perform NIST traceable calibration on continuous monitors. The 98220 is designed to be used on the shop floor at the workstation, virtually eliminating downtime, verifying that the continuous monitor is operating within tolerances. The 98220 provides a simple and quick means to assure compliance verificaton Per ANSI/ESD S20.20 Table 3 per ESD TR53.Limited WarrantyDesco expressly warrants that for a period of one (1) year from the dateof purchase Desco Continuous Monitors will be free of defects in material(parts) and workmanship (labor). Within the warranty period, a creditfor purchase of replacement Desco Continuous Monitors, or, at Desco’soption, the Continuous Monitor will be repaired or replaced free of charge.If product credit is issued, the amount will be calculated by multiplying the unused portion of the expected one year life times the original unit purchase price. Call Customer Service at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for Return Material Authorization (RMA) and proper shipping instructions and address. Include a copy of your original packing slip,invoice, or other proof of date of purchase. Any unit under warranty should be shipped prepaid to the Desco factory. Warranty replacements will takeapproximately two weeks.If your unit is out of warranty, Desco will quote repair charges necessaryto bring your unit up to factory standards. Call Customer Service at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for a Return Material Authorization (RMA) and proper shipping instructions and address.Warranty ExclusionsTHE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OFALL OTHER PRODUCT WARRANTIES, EXPRESSED AND IMPLIED,INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULARPURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. The expresswarranty will not apply to defects or damage due to accidents, neglect,misuse, alterations, operator error, or failure to properly maintain, clean or repair products.Limit of LiabilityIn no event will Desco or any seller be responsible or liable for anyinjury, loss or damage, direct or consequent, arising out of the use of orthe inability to use the product. Before using, users shall determine thesuitability of the product for their intended use, and users assume all riskand liability whatsoever in connection therewith.分销商库存信息: DESCO19218。

0878321014;中文规格书,Datasheet资料

This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:87832-1014Status:ActiveOverview:Milli-Grid™ Connector SystemDescription:2.00mm Pitch Milli-Grid™ Header, Surface Mount, Vertical, Shrouded, Lead-Free, 10Circuits, 0.38µm Gold (Au) Plating, without Locking Window, Center Polarization Slot,Cap, without PCB Locator, Embossed Tape on ReelDocuments:3D ModelProduct Specification PS-87831-027 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family PCB Headers Series87832Application Signal, Wire-to-BoardComments With Cap|Contact Molex for application in automotive industryOverviewMilli-Grid™ Connector System Product Name Milli-Grid™UPC822350245791PhysicalBreakawayNo Circuits (Loaded)10Circuits (maximum)10Color - ResinBlack Durability (mating cycles max)100First Mate / Last Break No Flammability94V-0Glow-Wire Compliant No Guide to Mating Part No Keying to Mating Part Yes Lock to Mating Part YesMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination Tin Material - Resin Nylon Net Weight0.670/g Number of Rows 2Orientation Vertical PCB Locator No PCB Retention NonePackaging TypeEmbossed Tape on Reel Pitch - Mating Interface2.00mm Pitch - Termination Interface 2.00mm Plating min - Mating0.381µm Plating min - Termination 1.905µm Polarized to PCB No Shrouded Fully StackableNo Surface Mount Compatible (SMC)YesTemperature Range - Operating-55°C to +105°CSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 87832SeriesMates With50394 Wire-to-Board Terminals, 51110Wire-to-Board Crimp Housing, 87568 Wire-to-Board IDT Housings, 79107 Board-to-Board Top Entry Through Hole Receptacle,79108 Board-to-Board FFC/FPC Top Entry Through Hole Receptacle, LTermination Interface: Style Through Hole and Surface MountElectricalCurrent - Maximum per Contact2AVoltage - Maximum125VSolder Process DataDuration at Max. Process Temperature (seconds)10Lead-free Process Capability Reflow Capable (SMT only)Max. Cycles at Max. Process Temperature1Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-87831-027Sales Drawing SD-87832-008This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0878321014。

7491181012;中文规格书,Datasheet资料

description :TBr 2006-07-31NameDatum / dateFreigabe erteilt / general release:D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Würth Elektronik eiSos GmbH & Co.KG...............................................Kunde / customerWürth Elektronik....................................................................................................................................................................Off-line transformer WE-UNITDatum / dateUnterschrift / signature ..................................................Kontrolliert / approvedVersion 1Geprüft / checked Änderung / modificationdescription :Off-line transformer WE-UNITDATUM / DATE : 2006-07-31H Schaltbild / SchematicsTBr 2006-07-31NameDatum / dateWürth ElektronikFreigabe erteilt / general release:Kunde / customerDatum / dateUnterschrift / signature ...................................................................................................................................................................................................................Würth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Version 1Änderung / modification..................................................Geprüft / checked Kontrolliert / approved46This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7491181012。

0428788842;中文规格书,Datasheet资料

This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42878-8842Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Vertical, Low Profile, 8/6, KeyedDocuments:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42878 (PDF)Agency CertificationCSA LR19980ULE107635GeneralProduct Family Modular Jacks/Plugs Series42878Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ45UPC800753829107PhysicalBoot Color N/A Color - ResinBlack Durability (mating cycles max)500Flammability94V-0Inverted / Top Latch N/AJack Height12.70mm Keying to Mating Part Yes Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin PolyesterOrientation Vertical (Top Entry)PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 3.18mm Packaging Type TrayPanel MountWith Flange Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Ports1Positions / Loaded Contacts8/6Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +85°C Termination Interface: Style Through Hole Waterproof / Dustproof No Wire/Cable TypeN/A ElectricalCurrent - Maximum per Contact1.5ASeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42878Series Mates With FCC 68 PlugsGrounding to PCB NoGrounding to Panel NoneShielded NoVoltage - Maximum150V AC (RMS)Solder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C235Material InfoReference - Drawing NumbersProduct Specification PS-42878Sales Drawing SDA-42878-****Test Summary TS-42878-001This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0428788842。

744878002;中文规格书,Datasheet资料

description :A mmB mmC mmD mmE mm FmmEigenschaften / properties Wert / valueEinheit / unittol.Induktivität (je Wicklg.) /inductance (each wdg.)DC-Widerstand (je Wicklg.) /DC-resistance (each wdg)DC-Widerstand (je Wicklg.) /DC-resistance (each wdg)Nennstrom (je Wicklg.) /rated Current (each wdg.)Sättigungsstrom (je Wicklg.) /saturation current (each wdg.)Eigenres.-Frequenz /self-res.-fequency Nennspannung /rated voltage33%+20°CFerrit/ ferrite OO 09-09-01NameDatum / dateA typ.max.V80Draht / wire:max. D Prüfgeräte / test equipment :E Testbedingungen / test conditions :HP 34401 A für/for I DC und/and R DCUmgebungstemperatur / temperature:Betriebstemp. / operating temperature: -40°C - + 125°C I N1,I N20,042A Basismaterial / base material: F Werkstoffe & Zulassungen / material & approvals :G Eigenschaften / general specifications :U DCΩI sat typ.HP 4274 A für/for L und/and Q max.SRF MHz 3,60It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions................................................................................................................................Freigabe erteilt / general release:Kunde / customer.................................................Datum / date..................................................................................Unterschrift / signature Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked max.Testbedingungen / test conditions 0,052±20% B Elektrische Eigenschaften / electrical properties :Umgebungstemp. / ambient temperature: -40°C - + 85°C 53ΔT = 40 K 2 SFBW; 155°CPOWER-CHOKE WE-DDµH R DC1,2L 1,L 2 A Mechanische Abmessungen / dimensions :1 kHz / 0,25V@ 20°2,4ΩR DC1,2|ΔL/L|<10%4,80DATUM / DATE : 2009-09-014,0 ± 0,22,7 ± 0,11,0 ± 0,1@ 20°4,0 max.7,3 ± 0,4 Luftfeuchtigkeit / humidity:Würth ElektronikTyp SC Lötpad / soldering spec.:Änderung / modificationVersion 1A BCD E2314Av v v vv v v v142 L13 L2StartFinish[ mm ]0,83,12,22,21,0description :OO 09-09-01NameDatum / date.................................................................................................Geprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationVersion 1Freigabe erteilt / general release:Kunde / customer..................................................................................................................................................................Würth ElektronikDatum / dateUnterschrift / signaturePOWER-CHOKE WE-DDDATUM / DATE : 2009-09-01H Induktivitätskurve / Inductance curve:0,000,501,001,502,002,500,01,02,03,04,05,06,07,08,09,0L (µH )Current (A)Induktivität vs Strom (typ.) / Inductance vs Current (typ.)description :I Rollenspezifikation / tape and reel specification:A 9,00± 0,1mmB 16,0± 0,2mm + 0,1- 0,0D 4,00± 0,1mmE 2,00± 0,1mm F 9,00± 0,1mm G3,50± 0,1mma 330,0 ± 2,0mmb 21,00± 0,8mmc 13,00± 0,5mm d 100,0± 1,0mmOO 09-09-01NameDatum / date.................................................................................................Geprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modification..................................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikFreigabe erteilt / general release:Kunde / customerDATUM / DATE : 2009-09-01mm 1,50C POWER-CHOKE WE-DDGurtspezifikation / Tape specification: Rollenspezifikation / Reel specification:Version 1Ø cadbABED øC FGThe force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 744878002。

0987861011;中文规格书,Datasheet资料

This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:98786-1011Status:ActiveOverview:MOX ProductsDescription:2.54mm Pitch MOX Receptacle Housing, 6 Circuits, Dual Row, BlackDocuments:Drawing (PDF)Packaging Specification PK-98786-001 (PDF)Application Specification AS-98787-001 (PDF)RoHS Certificate of Compliance (PDF)GeneralProduct Family Crimp Housings Series98786Application Power, Wire-to-Board, Wire-to-WireComments 2x3 Circuits, Contact Retention Force without secondary locking: 40N, with secondary locking: 60N OverviewMOX Products Product Name MOXUPC822348730544PhysicalCircuits (maximum)6Color - Resin Natural GenderFemale Glow-Wire Compliant No Keying to Mating Part None Lock to Mating Part Yes Material - Resin Nylon Net Weight1.060/g Number of Rows 2Packaging Type Bag Panel MountNoPitch - Mating Interface2.54mm Pitch - Termination Interface 2.54mm Polarized to Mating Part Yes StackableNoTemperature Range - Operating-40°C to +100°C ElectricalCurrent - Maximum per Contact7.5A Material InfoOld Part Number49901221Reference - Drawing NumbersApplication Specification AS-98787-001Packaging Specification PK-98786-001Sales DrawingSD-98786-001Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 98786SeriesMates With98780 Male Header, 98787 MOX Plug HousingUse With98658 MOX Crimp TerminalThis document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION/分销商库存信息: MOLEX 0987861011。

PA83M,PA83M883, 规格书,Datasheet 资料

SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS 1 Quiescent Current I Q 25°C ±150V V IN = 0, A V = 1008.5 mA 1 Input Offset Voltage V OS 25°C ±150V V IN = 0, A V = 100 3 mV 1 Input Offset Voltage V OS 25°C ±15V V IN = 0, A V = 100 5.7 mV 1 Input Bias Current, +IN +I B 25°C ±150V V IN = 0 50 pA 1 Input Bias Current, –IN –I B 25°C ±150V V IN = 0 50 pA 1 Input Offset Current I OS 25°C ±150V V IN = 050 pA 3 Quiescent Current I Q –55°C ±150V V IN = 0, A V = 100 10 mA 3 Input Offset Voltage V OS –55°C ±150V V IN = 0, A V =100 5 mV 3 Input Offset Voltage V OS –55°C ±15V V IN = 0, A V = 100 7.7 mV 3 Input Bias Current, +IN +I B –55°C ±150V V IN = 0 50 pA 3 Input BiasCurrent, –IN –I B –55°C ±150V V IN = 0 50 pA 3 Input Offset Current I OS –55°C ±150V V IN = 050 pA 2 Quiescent Current I Q 125°C ±150V V IN = 0, A V = 100 10 mA 2 Input Offset Voltage V OS 125°C ±150V V IN = 0, A V = 100 5.5 mV 2 Input Offset Voltage V OS 125°C ±15V V IN = 0, A V = 100 8.2 mV 2 Input Bias Current, +IN +I B 125°C ±150V V IN = 0 10 nA 2 Input Bias Current, –IN –I B 125°C ±150V V IN = 0 10 nA 2 Input Offset Current I OS 125°C ±150V V IN = 010 nA 4 Output Voltage, I O = 75mA V O 25°C ±85V R L = 1K 75 V 4 Output Voltage, I O = 29mA V O 25°C ±150V R L = 5K 145 V 4 Current Limits I CL 25°C ±30V R L = 100Ω75 125 mA 4 Stability/Noise E N 25°C ±150V R L = 5K, A V = 1, C L = 10nF 1 mV 4 Slew RateSR 25°C ±150V R L = 5K20 80 V/µs 4 Open Loop GainA OL 25°C ±150V R L = 5K, F = 10Hz96 dB 4 Common Mode Rejection CMR 25°C±32.5VR L = 5K, F = DC, V CM = ±22.5V 90 dB 6 Output Voltage, I O = 40mA V O –55°C ±45V R L = 1K 40 V 6 Output Voltage, I O = 29mA V O –55°C ±150V R L = 5K145 V 6 Stability/Noise E N –55°C ±150V R L = 5K, A V = 1, C L = 10nF 1 mV 6 Slew RateSR –55°C ±150V R L = 5K20 80 V/µs 6 Open Loop GainA OL –55°C ±150V R L = 5K, F = 10Hz96 dB 6 Common Mode Rejection CMR –55°C ±32.5V R L = 5K, F = DC, V CM = ±22.5V 90 dB 5 Output Voltage, I O = 40mA V O 125°C ±45V R L = 1K 40 V 5 Output Voltage, I O = 29mA V O 125°C ±150V R L = 5K145 V 5 Stability/Noise E N 125°C ±150V R L = 5K, A V = 1, C L = 10nF 1 mV 5 Slew RateSR 125°C ±150V R L = 5K20 80 V/µs 5 Open Loop GainA OL 125°C ±150V R L = 5K, F = 10Hz96 dB 5Common Mode RejectionCMR125°C ±32.5VR L = 5K, F = DC, V CM = ±22.5V90dBBURN IN CIRCUIT***These components are used to stabilize device due to poor high frequency characteristics of burn in board.** Input signals are calculated to result in internal powerdissipation of approximately 2.1W at case temperature = 125°C.2 PA83MUCONTACTING CIRRUS LOGIC SUPPORTFor all Apex Precision Power product questions and inquiries, call toll free 800-546-2739 in North America. For inquiries via email, please contact apex.support@.International customers can also request support by contacting their local Cirrus Logic Sales Representative.To find the one nearest to you, go to IMPORTANT NOTICECirrus Logic, Inc. and its subsidiaries ("Cirrus") believe that the information contained in this document is accurate and reliable. However, the information is subject to change without notice and is provided "AS IS" without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, indemnification, and limitation of liability. No responsibility is assumed by Cirrus for the use of this information, including use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third parties. This document is the property of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual property rights. Cirrus owns the copyrights associated with the information contained herein and gives con-sent for copies to be made of the information only for use within your organization with respect to Cirrus integrated circuits or other products of Cirrus. This consent does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROP-ERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, LIFE SUPPORT PROD-UCTS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUS-TOMER’S RISK AND CIRRUS DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS PRODUCT THAT IS USED IN SUCH A MANNER. IF THE CUSTOMER OR CUSTOMER’S CUSTOMER USES OR PERMITS THE USE OF CIRRUS PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES, BY SUCH USE, TO FULLY INDEMNIFY CIRRUS, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL LIABILITY, INCLUDING ATTORNEYS’ FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES.Cirrus Logic, Cirrus, and the Cirrus Logic logo designs, Apex Precision Power, Apex and the Apex Precision Power logo designs are trademarks of Cirrus Logic, Inc. All other brand and product names in this document may be trademarks or service marks of their respective owners.。

744770133;中文规格书,Datasheet资料

Bezeichnung :description := Start of winding Marking = Inductance code33% Umgebungstemperatur / temperature:+20°C100% SnMST 04-10-11MST 03-12-10RT 03-03-03MST02-03-27JH 00-12-06NameDatum / dateIt is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.Anbindung an Elektrode / soldering wire to plating:Sn/Ag/Cu - 96.5/3.0/0.5%Draht / wire:2SFBW 155°CUmgebungstemp. / ambient temperature: -40°C - + 85°C Freigabe erteilt / general release:Kunde / customerWürth Elektronik....................................................................................................................................................................Unterschrift / signature Ferrit/ferrite F Werkstoffe & Zulassungen / material & approvals :G Eigenschaften / general specifications :D Prüfgeräte / test equipment :E Testbedingungen / test conditions :Basismaterial / base material:Betriebstemp. / operating temperature: -40°C - + 125°C D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ..........................................................................................................................Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KG744770133SPEICHERDROSSEL WE-PDPOWER-CHOKE WE-PDArtikelnummer / part number : Luftfeuchtigkeit / humidity:HP 4274 A für/for L und/and Q HP 34401 A für/for I DC und/and R DCÄnderung / modificationVersion 1Version 2Version 3Version 4Version 5 Datum / dateEndoberfläche / finishing electrode:• MarkingRoHS compliantLFdescription :MST 04-10-11MST 03-12-10RT 03-03-03MST02-03-27JH 00-12-06NameDatum / dateH Induktivitätskurve / Inductance curve :POWER-CHOKE WE-PDDATUM / DATE : 2004-10-11Kontrolliert / approvedDatum / dateUnterschrift / signature Würth ElektronikWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Freigabe erteilt / general release:Kunde / customer..................................................................................................................................................................................................................................................................................Geprüft / checked Version 4Version 5Änderung / modificationVersion 1Version 2Version 3a 330,0± 0,5mmb 20,20± 0,2mm+ 0,5- 1,0d 100,0± 0,2mmMST 04-10-11MST 03-12-10RT 03-03-03MST02-03-27JH 00-12-06NameDatum / dateRollenspezifikation / Reel specification:Freigabe erteilt / general release:Kunde / customerc 13,00mm....................................................................................................................................................................Datum / dateUnterschrift / signature Würth Elektronik..........................................................................................................................Würth Elektronik eiSos GmbH & Co. KGGeprüft / checked Kontrolliert / approvedD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationVersion 1Version 2Version 3Version 4Version 5The force for tearing off cover tape is 10 to 130 grams in arrow direction165 to 180°feeding directionThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.分销商库存信息: WURTH-ELECTRONICS 744770133。

744873004;中文规格书,Datasheet资料

description :A mmB mmC mmD mm EmmEigenschaften / properties Wert / valueEinheit / unittol.Induktivität (je Wicklg.) /inductance (each wdg.)DC-Widerstand (je Wicklg.) /DC-resistance (each wdg.)DC-Widerstand (je Wicklg.) /DC-resistance (each wdg.)Nennstrom (je Wicklg.) (1) /rated Current (each wdg.) (1)Sättigungsstrom (je Wicklg.) /saturation current (each wdg.)Eigenres.-Frequenz (2) /self-res.-frequency (2)Nennspannung /rated voltage(1)both windings driven by rated current will occur ∆T /(2)both windings in parallel /Stromfluss durch beide Wicklungen verursachen ∆Tbeide Wicklungen parallel33% Umgebungstemperatur / temperature:+20°CFerrit/ ferrite Betriebstemp. / operating temperature: -40°C - + 125°C Umgebungstemp. / ambient temperature: -40°C - + 85°C It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.OO 09-11-01NameDatum / dateI sat A MHz ΔT = 40 K typ.m Ωtyp.10,00typ.max.m Ω19,04,87A @ 20°C 32,00R DC1,2 max ΔL/Lo = -10%I N1,I N2@ 20°C R DC1,2 typ SRF µH L 1,L 2 A Mechanische Abmessungen / dimensions:100 kHz / 5mA4,7POWER-CHOKE WE-DDLuftfeuchtigkeit / humidity:Würth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked DATUM / DATE : 2009-11-01max.Testbedingungen / test conditions 24,0±20%2 SFHW; 180°C UL-File Number:E174837C Lötpad / soldering spec.:B Elektrische Eigenschaften / electrical properties:Basismaterial / base material:GMC Metrahit 27I für/for R DC ...........................................................................................Würth Elektronik................................................................................Draht / wire:Unterschrift / signature Kontrolliert / approvedF Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:E Testbedingungen / test conditions:HP E4991A für/for SRFWK 3260B für/for L und/and I DC D Prüfgeräte / test equipment:max.Freigabe erteilt / general release:Kunde / customerhttp://www.we-online.deDatum / dateTyp XLÄnderung / modificationVersion 112,5 max.7,3 ± 0,58,5 max.4,9 ± 0,21,5 ± 0,2V80,0U DC (12)4 L13 L2Start Finish[ mm ]1,03,856,113,83,852,5A BCD E1243Adescription :OO 09-11-01NameDatum / datehttp://www.we-online.deGeprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationWürth Elektronik.............................................................................................................................................................................................................................................................Datum / dateUnterschrift / signature DATUM / DATE : 2009-11-01H Induktivitätskurve / Inductance curve:Freigabe erteilt / general release:Kunde / customerPOWER-CHOKE WE-DDVersion 10,000,501,001,502,002,503,003,504,004,505,000,05,010,015,020,025,0L (µH )Current (A)Induktivität vs Strom (typ.)/ Inductance vs Current (typ.)description :I Rollenspezifikation / tape and reel specification:A 12,5± 0,1mmB 16,0± 0,1mmC 24,0± 0,3mm+ 0,1- 0,0E 4,00± 0,1mm F 2,00± 0,1mm G 1,75± 0,1mm H 11,5± 0,1mm I 12,6± 0,1mm J 8,50± 0,1mm T0,40± 0,05mma 330,0± 2,0mmb 21,00± 0,8mmc 13,00± 0,5mmd 100,0± 1,0mmOO 09-11-01NameDatum / dateWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.de...........................................................................................Geprüft / checked Kontrolliert / approvedDatum / dateWürth ElektronikFreigabe erteilt / general release:Kunde / customer..................................................................................................................................................................Gurtspezifikation / Tape specification: Rollenspezifikation / Reel specification:Unterschrift / signature mm1,50D POWER-CHOKE WE-DDDATUM / DATE : 2009-11-01Änderung / modificationVersion 1The force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportationsignal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.FEøDA BCHGITJØ cadb分销商库存信息: WURTH-ELECTRONICS 744873004。