科喜洁身器
广州家用医疗器械经销商名单
负责 人
俞永进 王五一 王维圳 刘倩 陈锐潮 杨次龄 区剑篇 刘煦文 杨廷北 邵敏雄 黄德裕 王虹 吴禄泰 杨建国 张卓文 吴萍 李众 彭君茹 许松文 刘颂民 符月群 彭卫民 何一帆 何一帆 黄晓 余清声 梁耀铭 李东东 湛志荣 蔡郁晖 阮镇祥 黄一声 蓝荔 叶珊 张鲁疆 林少楷 李逢为 袁允梅 许庆春 孟鑫 卢剑武 赵英梅 谢锋
广州市庙前西街48号603室 广州市庙前西街号 广州市南岸路62号四楼前座 广州市南洲路宝兴街36—42号 广州市前进路163号大楼后楼502室 广州市荣兴路怡芳苑怡丰街1号101-102室 广州市三元里机场路九号怡乐酒店11楼1106房 广州市沙河路105号振兴商业大厦601室 广州市沙河同和云景花园云桂街16＃2A 广州市沙面北街59号 广州市署前路署前二街14号 广州市水荫路44号4楼 广州市水荫路水荫直街东一巷11号101室 广州市泰康路111号泰康城广场泰富中心26楼 广州市体育东路122号西塔1013-1014室 广州市天河北路189号中国市长大厦1606室 广州市天河北路233号中信广场45楼 广州市天河北路423号远晖商厦416、417室 广州市天河北路423号远晖商厦603、603A 广州市天河北路559号1901房 广州市天河北路601华标广场荟萃阁1303室 广州市天河北路612号1303房 广州市天河北路906号高科大厦A座1606、1607室 广州市天河北路金海花园金瀚阁30D 广州市天河工业园路华翠街58号805房 广州市天河龙口东路34-36号龙口科技大厦1803 广州市天河路551号龙苑大厦2307-2308房 广州市天河路9号润粤大厦2栋7C 广州市天河区枫叶路8号之二102房 广州市天河区广州大道北128号三楼 广州市天河区花城大道6号名门大厦1806室 广州市天河区黄埔大道西201号金泽大厦2612室 （01） 广州市天河区黄埔大道西 273号惠兰阁9B 广州市天河区黄埔大道中260号恒安大厦恒乐轩25G 广州市天河区林和西横路63号1607房 广州市天河区林和中路140号1703室 广州市天河区林和中路天誉花园乐雅阁2003房 广州市天河区龙口东路5-13号龙晖大厦509房 广州市天河区龙口西路577号二楼202室 广州市天河区龙口西路龙盛街72号101、102室 广州市天河区体育东路33号2207房 广州市天河区体育西广利路75号东洲大厦A栋2303室 广州市天河区天河北路5-9号正升大厦九楼907室 广州市天河区天河路93号海角楼1708房 广州市天河区五山路265号瑞华大厦南塔9I 广州市天河区燕岭路120号金燕大厦732房 广州市天河区禺东西路22号综合楼二楼
牙科诊所洗衣消毒器使用手册说明书
Clinic Washer-DisinfectorsWasher-Disinfector Line2High Quality Cleaning and DisinfectionThermal DisinfectionThermal disinfection takes place at 93°C with a temperature holding time in compliance with EN ISO 15883. Both temperature and time can be modified to meet the specific requirements of the customer.Mechanical Cleaning ActionMechanical action is a vital component of the cleaning process which uses heavy duty wash pumps to ensure high flow rate and effective spray pressure for better and faster cleaning results.Designed to Stay CleanThe washing chamber is designed with smooth edges and corners to ensure a clean chamber surface and prevent dirt build-up.The Clinic Range of Washer Disinfectors provides superior cleaning and disinfection combined with innovative options to minimize cost and time. This comprehensive approach offers a flexible solution for safe and thorough processing of a wide range of medical products for clinics, dental practices and medical centers.Easy-to-Use Washer-Disinfectors for ClinicsLong Lasting and SafeWater QualityBuilt-in large capacity water softener for a continuous supply of softened water enhances cleaning effectiveness and prevents build-up of limescale.Quality ComponentsWashing chamber, washing arms and filters are made of high quality corrosion proof AISI 316 stainless steel. Doublewall chamber construction and thorough insulation minimize heat loss and electricity consumption.Standard CompliantAll Tuttnauer washer-disinfectors comply with 93/42/EEC and are manufactured in accordance withEN ISO 15883-1 and 2.3Tiva 61010 DIN Baskets : 250 liter chamber Tiva 6008 DIN Baskets : 200 liter chamberThe Tiva 610 is an economic washer featuring low energy and water consumption. Several double door Tiva 610 washer-disinfectors used together are an ideal low-cost solution for medical centers that need effective washing of large quantities of medical items. Loading and unloading of instruments is carried out using manual trolleys, optionally connected to a conveyer system. The Tiva 600 is ideal for medical centers, dental practices and clinics. It marks the evolution of a flexible system for washing, disinfecting and drying of medical and laboratory items. The Tiva 600 washerprovides an excellent preparation for sterilization.4FeaturesPerformance• Washing temperature fully adjustable up to 93°C• Temperature controlled by means of two independent PT1000 probes• Fresh water intake between each phase of the cycle promotes hygiene and better cleaning• Connections to cold, warm and DI water are standard• A triple water filtration system captures residues so they are not re-circulated• The washing and drying injection system enables direct injection into hollow objects ensuring optimal thermal disinfection and drying• Filtered forced air drying, with adjustable time and temperature settings, helps to ensure complete drying inside and outside of all items in the washing chamber• Heavy duty self-cleaning water circulation pump ensures rapid flow rate and effective spray pressure• Steam condenser prevents steam from entering the washing area Design and Convenience• LCD display with 20 standard cycle programs and 20 additional adjustable cycle programs• RS-232 printer connection is provided for documenting the washing phases• Two chemical dosing pumps with the ability to adjust detergent consumption for each cycle (level control).• Glass viewing window• Self-cleaning chamber with rounded edges• Capacity to store up to four 5 liter containers of detergent• Doors are positioned at a convenient height for loading andunloading using a trolleyOptional• 3rd and 4th chemical dosing pump• HEPA H14 air filter•Integrated printer5Tiva 500 / Tiva 500C8 DIN Baskets : 171 liter chamberThe Tiva 500 series washer disinfectors are ideal for medical centers, dental practices and small hospitals for disinfecting a large range of surgical instruments. They are fast and effective making them ideally suited for preparing instruments for sterilization. These washers are specially designed for installations with limited space.Tiva 500• LED Display with 5 adjustable programs Tiva 500C• Powerful integrated filtered air drying system •LCD display with 40 adjustable programs67FeaturesPerformance• Washing and disinfection temperatures are fully adjustable up to 93°C• Temperature controlled by means of two independent PT1000 probes• Fresh water intake between each phase of the cycle promotes hygiene and better cleaning• Connections to cold, warm and DI water are standard• A triple water filtration system captures residues so they are not re-circulated• Steam condenser prevents condensation from entering the washing area• Heavy duty self-cleaning water circulation pump ensures rapid flow rate and effective spray pressureDesign and Convenience• RS-232 printer connection is provided for documenting the washing phases• Two chemical dosing pumps with the ability to adjust detergent consumption for each cycle (level control). Additional dosing pumps are optional.• Self-cleaning chamber with rounded edges• Tiva 500: LED display with 5 adjustable washing programs• Tiva 500C: LCD display with 20 standard programs and 20 additional custom programs The Tiva 500C also includes the following additional features:• Washing and drying injection system enables direct injection into hollow objects insuring optimal thermal disinfection and drying• Filtered forced air drying, with adjustable time and temperature settings, helps to ensure complete drying inside and outside of all items in the washing chamber Optional• Extra power 8kW (Tiva 500) • HEPA H14 air filter (Tiva 500C) • 3rd chemical dosing pump• 4th chemical dosing pump (Tiva 500C)• External printer• Glass viewing window available A complete range of accessories:•baskets, inserts, traysInternational Sales and Marketing E-mail: info@ Tuttnauer Europe b.v.Hoeksteen 11, 4815 PR P .O.B. 7191, 4800 GD Breda The NetherlandsTel: +31 (0) 765 423 510 Fax: +31 (0) 765 423 540E-mail: info@tuttnauer.nlTuttnauer USA Co.25 Power Drive,Hauppauge, NY 11788Tel: +800 624 5836, +631 737 4850 Fax: +631 737 0720E-mail: info@LTR330-0071/WAS/INT/V-2/08.11Washer-Disinfector LineDistributed by:Model Name Tiva 500Tiva 500C Tiva 600Tiva 610DimensionsWidth/Depth/Height mm.600/630/850 mm 600/630/850 mm 650/660/1685 mm 650/710/1840 mm Net Weight 65 Kg 65 Kg 179 Kg 230 Kg Gross Weight 70 Kg 70 Kg 188 Kg 260 Kg Basket Volume 8 DIN Baskets8 DIN Baskets8 DIN Baskets10 DIN BasketsConnections Drain PipeDiam. 25 mmDiam. 25 mmDiam. 25 mmDiam. 25 mmElectrical Connection230 Vac / 50Hz3 x 208V / 60Hz (optional)3 x 230V / 60Hz (optional)1 x 220V / 60Hz (optional)400 Vac 3 N+T / 50Hz 3 x 208V / 60Hz (optional)3 x 230V / 60Hz (optional)1 x 220V / 60Hz (optional)400 Vac 3 N+T / 50Hz 3 x 208V / 60Hz (optional)3 x 230V / 60Hz (optional)1 x 220V / 60Hz (optional)400 Vac 3 N+T / 50Hz 3 x 208V / 60Hz (optional)3 x 230V / 60Hz (optional)1 x 220V / 60Hz (optional)Total Power 3050 W 5600 W 8250 W 8250 W Pump Power 550 W 550 W 750 W 750 W Dryer Blower -150 m 3/h 150 m 3/h 250 m 3/h Dryer Heating -2000 W 2000 W 3000 W Breather Pipe Chamber -Diam. 50 mm Diam. 50 mm Diam. 60 mm Demineralized Water Connection ¾” male DN 20 mm¾” male DN 20 mm¾” male DN 20 mm¾” male DN 20 mmConnections - Cold Water Hydraulic Connection Cold Water ¾” male DN 20 mm ¾” male DN 20 mm ¾” male DN 20 mm ¾” male DN 20 mm Min. / Max. Pressure 1.0 / 5.0 bar1.0 / 5.0 bar1.0 / 5.0 bar1.0 / 5.0 barFlow Rate24 Liters/minute at 2 bar pressure. Dynamic.24 Liters/minute at 2 bar pressure. Dynamic.24 Liters/minute at 2 bar pressure. Dynamic.24 Liters/minute at 2 bar pressure. Dynamic.Min. / Max. Temperature 10°C / 15°C10°C / 15°C10°C / 15°C10°C / 15°CConnections - Warm Water Hydraulic Connection Warm Water ¾” male DN 20 mm ¾” male DN 20 mm ¾” male DN 20 mm ¾” male DN 20 mm Min. / Max. Pressure 1.0 / 5.0 bar1.0 / 5.0 bar1.0 / 5.0 bar1.0 / 5.0 barFlow Rate24 Liters/minute at 2 bar pressure. Dynamic.24 Liters/minute at 2 bar pressure. Dynamic.24 Liters/minute at 2 bar pressure. Dynamic.24 Liters/minute at 2 bar pressure. Dynamic.Min. / Max. Temperature 45° / 65°C45° / 60°C45° / 65°C45° / 65°CUtillities Noise52 dBA 52 dBA 56 dBA 57.5 dBA Min. / Max. Permitted Room Temperature+5°C / +40°C+5°C / +40°C+5°C / +40°C+5°C / +40°C。
氢气 Takeuchi 电动 nurses提取系统使用与维护指南说明书
YJ-LTE ™ Oil-Less Universal Refrigerant Recovery SystemOperation and MaintenanceManual(English and Spanish. French and German available at )1) Know your equipment. Read and under-stand the operation manual and the labelsaffixed to this unit. Learn the applicationsand limitations, as well as the specific poten-tial hazards of the YJ-LTE.2) Use the correct hoses. Use only hoses de-signed for handling of refrigerants. The hose should be the minimum length required foreach job and equipped with a shut-off device (such as the compact ball valve) at the endto reduce the likelihood of refrigerant leaks to the atmosphere. For best performance werecommend using 3/8” hoses. YELLOWJACKET hoses are made for almost everytype of refrigerant. See your local distribu-tor for more information.3) Ground all equipment. Plug the YJ-LTEinto a properly grounded receptacle.4) If the power cord is damaged, it must bereplaced by a cord assembly availablefrom the manufacturer or distributor wherepurchased.6) Do not pressure test with compressed air.Some mixtures of air and refrigerant havebeen shown to be combustible at elevatedpressures.7) Avoid dangerous environments. To keepoperator exposure to a minimum, use theYJ-LTE only in areas with sufficientventilation.Recovery should always be performed in well ventilated areas. Use the YJ-LTE only in locations where mechanical ventilation which provides at least four air changes per hour is present, or place the unit 18” above the floor during use.The YJ-LTE should not be used near open containers of gasoline or any other flammable2liquid. Do not allow refrigerants to come in contact with open flame. Refrigerant decom-position in flame can result in the formation of hydrofluoric acid or phosgene gas. Always wear safety goggles and gloves. Personalprotective equipment should be worn to pro-tect operator from frostbite.8) Use caution when connecting or discon-necting. Improper usage may result in refrigerant burns (frostbite). If a major leakoccurs, proceed immediately to a wellventilated area.9) Disconnect recovery machine frompower before servicing. An electricalshock hazard is present when the unit isdisassembled.10) Repair damaged parts. Do not operate the YJ-LTE if there is a defective part. Repair the unit to proper operating condi-tions before further use.11) Use recommended accessories. Follow the instructions that accompany all acces-ment or create a hazard. 12) Use the YJ-LTE only with the proper refrigerants . (See specifications for acomplete list of compatible refrigerants.)13) Operate the YJ-LTE within the designparameters only. The YJ-LTE was de-signed to operate within a temperaturerange of 40o (4o C) to 120o F (49o C). Donot operate in a wet location. 14) This machine is not to be used in the pres-ence of rain or other precipitation. Caution: All refrigerant hoses, recovery tanks, refrigerant lines, other vessels containing refrig-erants and the YJ-LTE should be handled as if under high pressure. When opening a tank con-taining refrigerant, open valves slowly to pre-vent release of refrigerant, especially if thevalves might be damaged. To prevent the risk of fire DO NOT use an extension cord longer than 50’ (15 m) and aminimum of 16 AWG (1.276 mm 2), 3 conduc-tor grounded.3YJ-LTE Push-Pull Liquid RecoveryThe Push-Pull Liquid Recovery mode is used for transferring large volumes of liquid re-frigerant. The YJ-LTE “pulls" vapor from the recovery cylinder and produces high pressure discharge gas that "pushes" liquid out of the HVAC system and into the recovery cylinder. Some HVAC systems will not allow for the push-pull recovery method. If any of the following conditions apply, do not use push-pull method, but follow the Liquid-Vapor Recovery instructions:System contains less than 10 pounds of refrigerant.System is a heat pump or other unit witha reversing valve.System has an accumulator between the service ports used in liquid recovery.The refrigerant system does not allow for the formation of a solid column ofliquid.For push-pull recovery, a sight glass is moni-tored during recovery. When liquid is no longer visible, stop recovery and finish re-covering using the Liquid-Vapor Recovery process. For complete recovery, the system must be pulled into a vacuum as required by EPA standards.5. Connect the recovery hose from system orutility port of your manifold to the 1/4”SUCTION port of the YJ-LTE.6. Connect the hose from the recovery cylin-der (liquid side) to the 1/4” DISCHARGEport of the YJ-LTE.7. Purge all hoses of non-condensable gassesbefore recovering refrigerant into recovery cylinder.8. Open the liquid valve on the recovery tank.9. Ensure valve is in recover position. Turnthe YJ-LTE on. 10. Open the utility valve and then slowlyopen the high side first to recover as much liquid as possible, then open low side and on your manifold. If severe vibration,knocking or lugging of the motor is no-ticed, it is recommended to partially close the service manifold valves briefly.11. When the manifold pressure gauge indi-cates the appropriate vacuum level recov-ery is complete.41. Close all system valves.2. Close valves on system hoses.3. Connect the system vapor recovery hoseor blue manifold hose to the PURGE porton the YJ-LTE. This hose must have avalve depressor for opening the purgeport Schrader valve.4. Turn the YJ-LTE valve to the PURGEposition, open the recovery/blue hosevalve, and turn the unit on.5. When the pressure gauge indicates theappropriate vacuum level, the purge proc-ess is complete.6. Close the valve on recovery dischargehose and the recovery tank. Shut off theYJ-LTE.5Purging the YJ-LTERecovery Tips and Techniques1) To assure the fastest and quickest recovery possible, use the shortest hoses possible and use hoses with Schrader depressors only where necessary. 2) Know what kind and the amount ofrefrigerant that is going to be recovered. This is critical to avoid contamination and know how much refrigerant will be recovered. The first job of the day usu-ally means a fresh, empty tank and no cause for worry about over-filling. How-ever, the last job of the day means there is already liquid in the tank and over-filling can be a concern. Over-filling a recovery cylinder can have disastrous results. 3) Refrigerant responds to heat. Therefore,a significant increase in the speed of the recovery process will be obtained if a heat gun is used, specifically to any spots where liquid may have accumulated.4) If recovering large amounts ofrefrigerant (20 lbs or more), the push-pull method is recommended. (Note: This process requires the hoses to be switched before recovery of the remaining vapor.) 5) Recovery can often be speeded up bysimultaneous recovery from both the high and low side of the system. Attach short hoses to both the high and low side of the system and join them with a BRUTE™ II Manifold or Y connector to the hose going to the Suction Port of the YJ-LTE. Recovery machines are not vacuum pumps. For proper evacuation, use a YELLOW JACKET SuperEvac™ vacuum pump. To speed up the evacuation process, use the SuperEvac vacuum pump and a core re-moval tool (Part #18975). For more information contact your YELLOW JACKET wholesaler.Wiring Diagram67YJ-LTER-22R-407C R-410AVapor lbs./min 0.37 0.30 0.35 Liquid lbs./min 6.83 7.53 9.27 Push-Pull lbs./min 9.1710.05 10.91Vacuum Level15” Hg*UL Certified Rates to ARI Standard 740-98Other Refrigerants - The YJ-LTE is approved for use with the following refrigerants which have not been certified for a particular recovery rate: R-12, R-114, R-401A, R401B, R-401C, R-402A, R-402B, R-404A, R-406A, R-407A, R-407B, R-407D, R-408A, R-409A, R-411A, R-411B, R-412A, R-500, R-502, R-507A and R509A.Model: 95730 95732 95733 95738Compressor:1/2 HP Twin Cylinder Reciprocating Oil-Less Power Source: 115V AC 60 Hz 1 Phase 230V AC 50 Hz 1 PhaseAmperage:8.0 4.0High Pressure Shut-Off: 517 psi—auto restart Vacuum Rating:Size: Height: 11.5”Width: 9.0” Depth: 13.5” Weight:24 lbs.25 lbs.25 lbs.25 lbs.13” @ 400 psi dischargeTechnical DataWarranty InformationRitchie Engineering guarantees YELLOW JACKET products to be free of defective material and workmanship which could affect the life of the product when used for the purpose for which it was designed. War-ranty does not cover items that have been altered, abused or returned solely in need of field service maintenance.The YELLOW JACKET YJ-LTE recoverysystem (UPC 9573X) is covered by a oneyear warranty for parts and labor. The war-ranty also allows for over-the-counter ex-change, when applicable. To receive theover-the-counter exchange, call Ritchie Engi-neering Customer Service at (800)769-8370and get the required authorization number.Failure to get the required authorization num-ber could result in a denial of the over-the-counter exchange.The following exceptions will not be coveredunder this warranty: Recovery products thathave been altered, misused, or improperlymaintained.The following must be done before return-ing unit:1) Call our technical service personnel at(800) 769-8370 to assess if the problemcan be resolved over the phone.2) Obtain an RGA number from RitchieEngineering for the return of the product.3) Fax a copy of the original invoice to(800) 322-8684.Note: All units must be shipped to an au-thorized repair center for repair. If at anytime after the warranty period you have prob-lems with your YELLOW JACKET recoveryunit, call our technical service department forhelp in selecting the correct replacementparts, or to arrange for its repair at reasonablecosts.YELLOW JACKET Products DivisionRitchie Engineering Co., Inc.10950 Hampshire Avenue SouthBloomington, MN 55438e-mail:*************************Web Site: Phone: 800-769-8370Int’l Phone: 952-943-1333Fax: 800-322-8684Int’l Fax: 952-943-1605Printed in U.S.A. Part #151135_C。
可喜安KCM-6000新治疗仪
可喜安KCM-6000新治疗仪一、治疗仪诞生背景随着现代人健康意识的逐渐变化，人们的生活质量也发生了改变。
每个人都渴望健康并且为了健康投资了时间也付出了很多的努力。
随之而来的是顾客对健康产品的认识和要求的不断提高。
可喜安也紧随时代的步伐，为了让顾客能够更安心更便利的使用，能尽快的看得到好的效果，在原产品的基础上进行了修改和完善，不仅添加了新的成分，在设计上也做了很时尚前卫的改进。
为了给大家呈现出更高品质的治疗仪，我们紧随健康时代的步伐，采用了更环保，更具有竞争性和差别化的多功能高级材料。
二、治疗仪（KCM6000）由三大部分组成:（一）调节器（二）外皮（三）内胆（一）外皮本体外皮采用了环保材料，响应了绿色生活号召的同时以即高端又温和的色彩来让使用者感觉到舒适的治疗环境，尤其是赫喜波药石除了改变药石的形状之外添加了七宝石的成分来大幅提高了气、指压、热灸、远红外线、负离子的效果。
规格：2000×1500×85 /2000×1800×85重量：22kg(26kg) /26kg(29kg)药石：2251个（含半块56快） /2764个（含半块56块）1.药石新产品治疗仪的药石设计成全新的形状.同时药石的数量也从1527增加724个达到了2251个，体现出了高品位治疗仪的同时也大幅提高了远红外线、负离子、指压、热灸、气等治疗效果，更加紧密地排列在一起的药石也减少了使用者后背的不适感觉，在原来的药石形状下面再加上一个六角形来提高了指压和气的效果。
还使药石的成分和外观上也大幅提高，成为了名符其实的温热器行业龙头企业。
药石的成分有麦饭石+电气石+黑云母+长石+可喜安独特技术。
2.宝福乐环保皮革随着国际上的趋势而生产的环保材料（符合欧洲环保认证书 EUECO的标准）-宝福乐皮革，宝福乐皮革的纹路在华丽当中不失朴实，创造了优雅温馨的卧室环境。
和别的面料相比比较厚实，而且触感柔软，不容易撕裂。
一种用于洁净服的清洗灭菌系统[实用新型专利]
![一种用于洁净服的清洗灭菌系统[实用新型专利]](https://img.taocdn.com/s3/m/4cd395ea03d8ce2f01662346.png)
专利名称：一种用于洁净服的清洗灭菌系统专利类型：实用新型专利
发明人：柯信,郑起平
申请号：CN201420030474.6
申请日：20140117
公开号：CN203694168U
公开日：
20140709
专利内容由知识产权出版社提供
摘要：本实用新型涉及一种用于洁净服的清洗灭菌系统，包括清洗段读卡器、灭菌段读卡器、系统服务器、清洗执行机构和灭菌执行机构，所述的系统服务器分别连接清洗段读卡器、灭菌段读卡器、清洗执行机构和灭菌执行机构，所述的洁净服内嵌设有存储有洁净服信息的电子标签。
与现有技术相比，本实用新型具有提高工作效率等优点。
申请人：柯信
地址：571100 海南省海口市琼山区府城镇琼州大道66号
国籍：CN
代理机构：上海科盛知识产权代理有限公司
代理人：赵继明
更多信息请下载全文后查看。
吉利克肤腺强壮冷波清晰喷墨清洁剂说明书
SAFETY DATA SHEETIssuing Date: 18-Mar-2015Revision Date: 18-Mar-2015Version 11. IDENTIFICATIONProduct Name Gillette Clincal Endurance Cool Wave Clear Gel Product ID:96889637_RET_NGProduct Type:Finished Product - Consumer (Retail) Use Only Recommended Use Personal Beauty Care Product ManufacturerThe Procter & Gamble Company Sharon Woods Innovation Center 11510 Reed Hartman Highway Cincinnati OH 45241+1 513 626-2500E-mail Address Emergency TelephoneTransportation (24 HR)CHEMTREC - 1-800-424-9300(U.S./ Canada) or 1-703-527-3887Mexico toll free in country: 800-681-95312. HAZARD IDENTIFICATION"Consumer Products", as defined by the US Consumer Product Safety Act and which are used as intended (typical consumer duration and frequency), are exempt from the OSHA Hazard Communication Standard (29 CFR 1910.1200). This SDS is being provided as a courtesy to help assist in the safe handling and proper use of the product.This product is classifed under 29CFR 1910.1200(d) and the Canadian Hazardous Products Regulation as follows:.Eye Damage / Irritation Category 2B Flammable Liquids Category 3Signal Word WARNINGHazard StatementsCauses eye irritationFLAMMABLE LIQUID AND VAPORHazard pictograms3. COMPOSITION/INFORMATION ON INGREDIENTSIngredients are listed according to 29CFR 1910.1200 Appendix D and the Canadian Hazardous Products Regulation 4. FIRST AID MEASURESFirst aid measures for different exposure routes Eye contactIF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.Skin contact None under normal use.Ingestion Not an expected route of exposure. If swallowed:. Clean mouth with water and afterwards drink plenty of water.InhalationNone under normal use.Most important symptoms/effects,acute and delayedMay cause eye irritation.Indication of immediate medical attention and special treatment needed, if necessary Notes to PhysicianTreat symptomatically.5. FIRE-FIGHTING MEASURESFlammable properties Flammable liquid and vaporSuitable extinguishing media Water. Dry chemical. Alcohol-resistant foam. Carbon dioxide (CO 2).Unsuitable Extinguishing Media Do not use a solid water stream as it may scatter and spread fire.Special hazardFumes may catch fire.Precautionary Statements -PreventionKeep container tightly closed K e e p a w a y f r o m h e a t /s p a r k s /o p e n f l a m e s /h o t s u r f a c e s . — N o s m o k i n g Wash hands thoroughly after handlingPrecautionary Statements -ResponseIn case of fire: Use water, CO2, dry chemical, or foam for extinctionIF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsingIf eye irritation persists: Get medical advice/attention Precautionary Statements -StorageNonePrecautionary Statements -DisposalDispose of contents/container in accordance with local regulation Hazards not otherwise classified (HNOC)NoneChemical NameSynonymsTrade SecretCAS-No Weight %Calcium chloride (CaCl2), dihydrate -No 10035-04-8 1 - 5Octamethylcyclotetrasiloxane-No556-67-20.1 - 1.0Special protective equipment for fire-fighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.Specific hazards arising from thechemicalNone.6. ACCIDENTAL RELEASE MEASURESPersonal precautions, protective equipment and emergency proceduresPersonal precautions None under normal use conditions.Advice for emergency responders Use personal protective equipment as required.Environmental precautions Do not discharge product into natural waters without pre-treatment or adequate dilution. Methods and materials for containment and cleaning upMethods for containment Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.Methods for cleaning up Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand,earth, diatomaceous earth, vermiculite) and place in container for disposal according tolocal / national regulations (see section 13).7. HANDLING AND STORAGEPrecautions for safe handlingAdvice on safe handling Keep container closed when not in use. Keep away from open flames, hot surfaces andsources of ignition. Never return spills in original containers for re-use. Use personalprotective equipment as required. Keep out of the reach of children.Conditions for safe storage, including any incompatibilitiesTechnical measures/Storage conditions Keep away from open flames, hot surfaces and sources of ignition. Store away from other materials.Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Store in acool/low-temperature, well-ventilated, dry place away from heat and ignition sources. Incompatible products None known.8. EXPOSURE CONTROLS/PERSONAL PROTECTIONControl parametersExposure Guidelines Exposure guidelines are not relevant when product is used as intended in a householdsetting.Exposure controlsEngineering Measures Manufacturing Sites:Ensure adequate ventilationDistribution, Workplace and Household Settings:Not applicablePersonal Protective EquipmentEye Protection Manufacturing Sites:Safety glasses with side-shieldsDistribution, Workplace and Household Settings:No special protective equipment requiredHand Protection No special protective equipment requiredSkin and Body Protection No special protective equipment requiredRespiratory Protection No special protective equipment required9. PHYSICAL AND CHEMICAL PROPERTIESPhysical State @20°C liquidAppearance clear gelOdor characteristicOdor threshold No information availableProperty Values NotepH value 3 - 5Melting/freezing point No information availableBoiling point/boiling range No information availableFlash point 30 °C / 86 °F Closed cupEvaporation rate No information availableFlammability (solid, gas)No information availableFlammability Limits in AirUpper flammability limit No information availableLower Flammability Limit No information availableVapor pressure No information availableVapor density No information availableRelative density No information availableWater solubility slightly solubleSolubility in other solvents No information availablePartition coefficient: n-octanol/water No information availableAutoignition temperature No information available.Decomposition temperature No information available.Viscosity of Product No information availableVOC Content (%)Products comply with US state and federal regulations for VOC content in consumerproducts.10. STABILITY AND REACTIVITYReactivity None under normal use conditions.Stability Stable under normal conditions.Hazardous polymerization Hazardous polymerization does not occur.Hazardous Reactions None under normal processing.Conditions to Avoid Keep away from open flames, hot surfaces and sources of ignition.Materials to avoid None in particular.Hazardous Decomposition Products None under normal use.11. TOXICOLOGICAL INFORMATIONProduct InformationInformation on likely routes of exposureInhalation No known effect.Skin contact No known effect.Ingestion No known effect.Eye contact Avoid contact with eyes. Irritating to eyes.Delayed and immediate effects as well as chronic effects from short and long-term exposure Acute toxicity No known effect.Skin corrosion/irritation No known effect.Serious eye damage/eye irritation Irritating to eyes.Skin sensitization No known effect.Respiratory sensitization No known effect.Germ cell mutagenicity No known effect.Neurological Effects No known effect.Reproductive toxicity No known effect.Developmental toxicity No known effect.Teratogenicity No known effect.STOT - single exposure No known effect.STOT - repeated exposure No known effect.Target Organ Effects No known effect.Aspiration hazard No known effect.Carcinogenicity No known effect.12. ECOLOGICAL INFORMATION EcotoxicityThe product is not expected to be hazardous to the environment.Persistence and degradability No information available.Bioaccumulative potential No information available.Mobility No information available.Other adverse effects No information available.13. DISPOSAL CONSIDERATIONSWaste treatmentWaste from Residues / Unused Products Disposal should be in accordance with applicable regional, national and local laws and regulations.Contaminated packaging Disposal should be in accordance with applicable regional, national and local laws andregulations.California Hazardous Waste Codes(non-household setting)331Disposal recommendations Products covered by this MSDS, in their original form, when disposed from a commercialfacility as waste, are ignitable hazardous waste, D001, according to Federal RCRAregulations(40 CFR 261). Disposal should be in accordance with Local, State and Federalregulations.14. TRANSPORT INFORMATIONDOTUN no UN1993UN Proper shipping name Flammable liquid, n.o.sDescription UN1993, Flammable liquid, n.o.s (Ethanol, Isopropanol), 3, IIIHazard Class3Packing Group III128Emergency Response GuideNumberIMDGUN Number UN1993UN Proper shipping name Flammable liquid, n.o.s.Description UN1993, Flammable liquid, n.o.s. (Ethanol, Isopropanol), 3, IIITransport hazard class(es)3Packing Group IIIEmS-No F-E, S-EIATAUN no UN1993UN Proper shipping name Flammable liquid, n.o.s.Description UN1993, Flammable liquid, n.o.s. (Ethanol, Isopropanol), 3, IIIHazard Class3Packing Group IIIERG Code3L15. REGULATORY INFORMATIONU.S. Federal RegulationsSARA 313Not applicable for consumer useCERCLANot applicable for consumer useFood and Drug Administration (FDA)The product described in this Material Safety Data Sheet is regulated under the Federal Food, Drug, and Cosmetics Act and is safe to use as per directions on container, box or accompanying literature (where applicable)Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61)Not applicable for consumer useClean Water ActNot applicable for consumer useCalifornia Proposition 65This product is not subject to warning labeling under California Proposition 65.U.S. State Regulations (RTK)Not applicable for consumer useInternational InventoriesUnited StatesProduct is a personal care product and regulated under FDA.CanadaThis product is in compliance with CEPA for import by P&G.LegendTSCA - United States Toxic Substances Control Act Section 8(b) InventoryCEPA - Canadian Environmental Protection ActPerfumes contained with the products comply with appropriate IFRA guidance.16. OTHER INFORMATIONIssuing Date:18-Mar-2015Revision Date:18-Mar-2015Reason for revision Initial Release.DisclaimerThe information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the textEnd of SDS。
可贝拉公司 Husky 1207 基板清洁剂说明书
CANBERRA CORPORATIONSAFETY DATA SHEET1. IdentificationProduct identifier: HUSKY 1207 GELLED BASEBOARD STRIPPERRecommended use: CleanerRecommended restrictions: None known.Company information: CANBERRA CORP.3610 N. HOLLAND-SYLVANIA RDTOLEDO, OH 43615 United StatesPhone: 419-841-6616 Emergency telephone US: 1-866-836-88552. Hazard(s) identificationGHS Classification: Classification of this mixture in accordance with paragraph (d) of §1910.1200.Flammable Aerosols - Category 1Skin corrosion/irritation - Category 2Serious eye damage/eye irritation - Category 2Sensitization, skin - Category 1Label elements:Signal word: DangerHazard statement: Extremely flammable aerosol. Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction.Precautionary statements: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Avoid breathing gas. Contaminated work clothing must not be allowed out of the workplace. Wash thoroughly after handling. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection.If on skin: Wash with plenty of water. Specific treatment. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.Collect spillage. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Dispose of contents/container in accordance with local/regional/national/international regulations.Hazard(s) not otherwise classified (HNOC): None known.3. Composition/information on ingredientsChemical characterization: Mixture of solvents and auxiliary agents.Hazardous ingredients: The exact percentage of composition has been withheld as a trade secret.20 - 40% 2-Butoxyethanol CAS 111-76-22 - 10% Propane CAS 74-98-62 - 10% Butane CAS 106-97-84. First-aid measuresInhalation: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing.Call a physician if symptoms develop or persist.Skin contact: In case of eczema or other skin disorders: Seek medical attention and take along these instructions.Eye contact: Rinse with water. Get medical attention if irritation develops and persists.Ingestion: Rinse mouth. Get medical attention if symptoms occur.Most important symptoms/effects, acute and delayed: Dermatitis. Rash. Severe eye irritation. Symptoms may include stinging, tearing, redness, and blurred vision. Skin irritation. May cause redness and pain. May cause an allergic skin reaction. Indication of immediate medical attention and special treatment needed: Provide general supportive measures and treat symptomatically. Keep victim under observation. Symptoms may be delayed.General information: Wash contaminated clothing before reuse.5. Fire-fighting measuresSuitable extinguishing media: Powder. Alcohol resistant foam. Water spray. Carbon dioxide (CO2).Unsuitable extinguishing media: Do not use water jet as an extinguisher, as this will spread the fire.Specific hazards arising from the chemical: Contents under pressure. Pressurized container may explode when exposed to heat or flame.Special protective equipment and precautions for firefighters: Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, and rubber boots.Fire-fighting equipment/instructions: Move containers from fire area if you can do so without risk. Containers should be cooled with water to prevent vapor pressure build up. For massive fire in cargo area, use unmanned hose holder or monitor nozzles, if possible. If not, withdraw and let fire burn out.Specific methods: Use standard firefighting procedures and consider the hazards of other involved materials. Move containers from fire area if you can do so without risk. Use water spray to cool unopened containers. In the event of fire and/or explosion do not breathe fumes. General fire hazards: Extremely flammable aerosol.6. Accidental release measuresPersonal precautions, protective equipment and emergency procedures: Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of low areas. Wear appropriate protective equipment and clothing during clean-up. Avoid breathing gas. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them. Local authorities should be advised if significant spillages cannot be contained. Methods and materials for containment and cleaning up: Refer to attached safety data sheets and/or instructions for use. Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keep combustibles (wood, paper, oil, etc.) away from spilled material. Stop leak if you can do so without risk. Move the cylinder to a safe and open area if the leak is irreparable. Use water spray to reduce vapors or divert vapor cloud drift. Isolate area until gas has dispersed. Prevent entry into waterways, sewer, basements or confined areas.Environmental precautions: Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground.7. Handling and storagePrecautions for safe handling Pressurized container: Do not pierce or burn, even after use. Do not use if spray button is missing or defective. Do not spray on a naked flame or any other incandescent material. Do not smoke while using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition. All equipment used when handling the product must be grounded. Do not get in eyes, on skin, or on clothing. Avoid breathing gas. Avoid prolonged exposure. Use only in well-ventilated areas. Wear appropriate personal protective equipment. Avoid release to the environment. Observe good industrial hygiene practices.Conditions for safe storage, including any incompatibilities: Level 1 Aerosol.Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50°C/122 °F. Do not puncture, incinerate or crush. Do not handle or store near an open flame, heat or other sources of ignition. This material can accumulate static charge which may cause spark and become an ignition source. Refrigeration recommended. Store away from incompatible materials.8. Exposure controls/personal protectionOccupational exposure limitsUS. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)Components Type Value2-Butoxyethanol (CAS 111-76-2) PEL 240 mg/m3 (50 ppm)Propane (CAS 74-98-6) PEL 1800 mg/m3 (1000 ppm)US. ACGIH Threshold Limit ValuesComponents Type Value2-Butoxyethanol (CAS 111-76-2) TWA 20 ppmButane (CAS 106-97-8) STEL 1000 ppmUS. NIOSH: Pocket Guide to Chemical HazardsComponents Type Value2-Butoxyethanol (CAS 111-76-2) TWA 24 mg/m3 (5 ppm)Butane (CAS 106-97-8) TWA 1900 mg/m3 (800 ppm)Propane (CAS 74-98-6) TWA 1800 mg/m3 (1000 ppm)Exposure guidelinesAppropriate engineering Controls: Good general ventilation should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency shower must be available when handling this product.Individual protection measures, such as personal protective equipmentEye/face protection: Face shield is recommended. Wear safety glasses with side shields (or goggles).Hand protection: Wear appropriate chemical resistant gloves.Other: Wear appropriate chemical resistant clothing. Use of an impervious apron is recommended.Respiratory protection: If permissible levels are exceeded use organic vapor cartridge or an air-supplied respirator.General hygiene considerations: When using do not smoke. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Contaminated work clothing should not be allowed out of the workplace.9. Physical and chemical propertiesAppearancePhysical state: Gas. Form: Aerosol.Color: Tan. Brown. Odor: Not available.Odor threshold: Not available. pH: Not available.Melting point/freezing point: Not available. Auto-ignition temperature: 446 °F (230 °C) estimated.Initial boiling point and boiling range: 177.72 °F (80.96 °C) estimated.Flash point: -156.0 °F (-104.4 °C) Propellant estimated.Evaporation rate: Not available. Flammability: Not available.Upper/lower flammability or explosive limitsFlammability limit – lower (%): Not available. Flammability limit – upper (%): Not available.Explosive limit - lower (%): Not available. Explosive limit - upper (%): Not available.Vapor pressure: 60 - 70 psig @70F estimated. Vapor density: Not available.Relative density: Not available. Specific gravity: 0.906 estimatedSolubility (water): Not available. Partition coefficient (n-octanol/water): Not available. Decomposition temperature: Not available. Viscosity: Not available.10. Stability and reactivityReactivity: The product is stable and non-reactive under normal conditions of use, storage and transport.Chemical stability: Material is stable under normal conditions.Possibility of hazardous reactions: Hazardous polymerization does not occur.Conditions to avoid: Avoid temperatures exceeding the flash point. Contact with incompatible materials.Incompatible materials Strong oxidizing agents. Nitrates. Fluorine. Chlorine.Hazardous decomposition products: No hazardous decomposition products are known.11. Toxicological informationInformation on likely routes of exposureIngestion: Expected to be a low ingestion hazard.Inhalation: Prolonged inhalation may be harmful.Skin contact: Causes skin irritation. May cause an allergic skin reaction. 2-Butoxyethanol may be absorbed through the skin in toxic amounts if contact is repeated and prolonged. These effects have not been observed in humans.Eye contact: Causes serious eye irritation.Symptoms related to the physical, chemical and toxicological characteristics: Dermatitis. Rash. Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation. May cause redness and pain. May cause an allergic skin reaction.Information on toxicological effects:Acute toxicity: May cause an allergic skin reaction.Skin corrosion/irritation: Causes skin irritation.Serious eye damage/eye irritation: Causes serious eye irritation.Respiratory sensitization: Not available.Skin sensitization: May cause an allergic skin reaction.Carcinogenicity: This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050): Not listed.Reproductive toxicity: This product is not expected to cause reproductive or developmental effects.Specific target organ toxicity - single exposure: Not classified.Specific target organ toxicity - repeated exposure: Not classified.Aspiration hazard: Not likely, due to the form of the product.Chronic effects: Prolonged inhalation may be harmful. May be harmful if absorbed through skin. 2-Butoxyethanol may be absorbed through the skin in toxic amounts if contact is repeated and prolonged.12. Ecological informationEcotoxicity: Harmful to aquatic life with long lasting effects.Persistence and degradability: No data is available on the degradability of this product.Bioaccumulative potential: No data available.Partition coefficient n-octanol / water (log Kow): 2-Butoxyethanol 0.83 Butane 2.89 Propane 2.36Mobility in soil: No data available.Other adverse effects: No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.13. Disposal considerationsDisposal instructions Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Contents under pressure. Do not puncture, incinerate or crush. Do not allow this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of contents/container in accordance with local/regional/national/international regulations.Waste from residues/unused products: Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner.Contaminated packaging: Empty containers should be taken to an approved waste site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied.14. Transport informationDOT UN number: UN1950 UN proper shipping name: Aerosols, flammable Class: 2.1Packing group: Not applicable.Special precautions for user: Read safety instructions, SDS and emergency procedures before handling. Read safety instructions, SDS and emergency procedures before handling.Packaging exceptions: This product meets the exception requirements of section 173.306 as a limited quantity and may be shipped as a limited quantity.15. Regulatory informationUS federal regulationsThis product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.All components are on the U.S. EPA TSCA Inventory List.TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D): Not regulated.CERCLA Hazardous Substance List (40 CFR 302.4): Not listed.SARA 304 Emergency release notification: Not regulated.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050): Not listed.Superfund Amendments and Reauthorization Act of 1986 (SARA): Hazard categories:Immediate Hazard – Yes Delayed Hazard – NoFire Hazard – Yes Pressure Hazard – NoReactivity Hazard – NoSARA 302 Extremely hazardous substance: Not applicable.SARA 311/312 Hazardous chemical: NoSARA 313 (TRI reporting): Not applicable.Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List: Not regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130): Butane (CAS 106-97-8); Propane (CAS 74-98-6)Safe Drinking Water Act (SDWA): Not regulated.US state regulationsUS. Massachusetts RTK - Substance ListUS. New Jersey Worker and Community Right-to-Know ActUS. Pennsylvania Worker and Community Right-to-Know Law2-Butoxyethanol (CAS 111-76-2) Butane (CAS 106-97-8) Propane (CAS 74-98-6)US. Rhode Island RTKButane (CAS 106-97-8) Propane (CAS 74-98-6)US. California Proposition 65: WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. 1,4-Dioxane (CAS 123-91-1); Ethylene Oxide (CAS 75-21-8)16. Other information, including date of preparation or last revisionDate issued: 01. 02. 2015 HSK-1207 Revision: N/ADisclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.。
西屋WHJ-H1智能洁身器安装使用说明书
产品以实物为准感谢您购买本产品，使用前请认真阅读本说明书内容，本产品仅限大陆地区销售使用。
西屋智能洁身器安装使用说明书INTELLIGENT BIDETWHJ-H1PRODUCT MANUAL一、材料清单二、部件名称三、技术规格四、技术图纸和电源连接建议五、安全措施六、安装前七、施工要点及各部名称八、安装九、遥控器概述十、旋钮说明及操作十一、臀部清洗及女性操作十二、水温设定十三、水压设定十四、喷嘴位置调节（在清洗模式下）十五、座圈温度设定十六、暖风设定十七、ECO节能环保省电模式和光感夜灯设定十八、喷嘴自动清洗模式/冲刷设定十九、长时间未使用处理方式二十、清洁保养二十一、喷嘴及刷圈喷头清洁二十二、清洗过滤网及更换过滤器二十三、清洗内置过滤器二十四、更换活性炭二十五、更换干电池二十六、故障检修二十七、电子电气有害物质限制指示表01020304 05-080910 10-151617181819192021222324252627282930 31-3334主体遥控器膨胀螺钉组过滤器坐厕密封圈专配球阀开关（含装饰圈+限流片）上盖漏电保护插头着座感应器座圈（可加热）喷嘴马桶主体说明：额定功率：本产品在环境温度23℃±2℃，进水静压0.2 MPa±0.02MPa，进水温度15℃±0.5℃条件下， 开启妇洗功能并依次将流量调到最大，座温、水温设置为最高档，按停止后再立即开启妇洗 并持续稳定工作一个清洗周期的平均功率。
最大输入功率：本产品在环境温度23℃±2℃，进水静压0.2 MPa±0.02MPa，进水温度5℃±1℃条件下，依次将流量、座温、水温设置为最高档后，立即开启妇洗并持续稳定工作一个清洗周期的最大功率。
最佳清洁性能说明：本产品获得最大清洁率效果，需将流量、水温调到最高档后，开启臀部清洗功能，调整喷嘴位置到最前段，清洗1分钟后，调整喷嘴位置到最后端，直至冲洗周期结束。
2024版医疗器械清洗
2024版医疗器械清洗合同编号：2024版医疗器械清洗一、合同主体鉴于双方均有意愿就医疗器械清洗业务建立合作关系，经充分协商，达成如下协议。
二、合同前言背景：随着医疗行业的发展，医疗器械的清洁与消毒工作越来越受到重视。
为了确保医疗器械的清洁度，提高医疗质量，减少交叉感染的风险，甲方拟委托乙方承担医疗器械清洗业务。
目的：双方通过本合同明确各自的权利和义务，确保医疗器械清洗服务质量，共同提高医疗行业的服务水平。
三、定义与解释1. 医疗器械：指用于预防、诊断、治疗疾病，进行康复和保健的设备、器具、用品、材料及其辅助设施。
2. 清洗：指对医疗器械表面和内部进行去除污渍、血渍、有机物、微生物等过程的处理。
3. 消毒：指采用物理或化学方法杀灭或去除医疗器械表面的病原微生物，以达到灭菌或无菌的目的。
4. 灭菌：指采用物理或化学方法杀灭医疗器械表面的一切微生物，包括细菌芽孢。
5. 交叉感染：指患者在医疗机构接受治疗或护理过程中，由于使用受污染的医疗器械而导致的感染。
6. 服务质量：指乙方提供医疗器械清洗服务的效果，包括清洗质量、清洗效率、客户满意度等方面。
四、权利与义务1. 甲方的权利与义务：（1）提供真实、完整的医疗器械清洗需求，包括清洗数量、清洗类型、清洗要求等。
（2）按照约定时间、地点交付医疗器械给乙方进行清洗。
（3）支付乙方清洗服务费用，并根据双方约定支付乙方奖励或罚款。
（4）对乙方清洗过程中的问题提出改进建议，并有权利要求乙方整改。
2. 乙方的权利与义务：（1）按照甲方要求，提供高质量的医疗器械清洗服务，确保医疗器械的清洁度。
（2）建立健全清洗质量控制体系，对清洗过程进行严格监控，确保清洗质量。
（3）对清洗后的医疗器械进行合格检验，并向甲方提供检验报告。
（4）对甲方的建议和意见进行及时整改，确保服务质量。
（5）承担清洗过程中发生的安全事故的责任，并依法赔偿甲方损失。
五、履行条件1. 时间：乙方应在甲方规定的时间内完成医疗器械的清洗工作。
非医疗器械目录
当我被上帝造出来时，上帝问我想在人间当一个怎样的人，我不假思索的说，我要做一个伟大的世人皆知的人。
于是，我降临在了人间。
我出生在一个官僚知识分子之家，父亲在朝中做官，精读诗书，母亲知书答礼，温柔体贴，父母给我去了一个好听的名字：李清照。
小时侯，受父母影响的我饱读诗书，聪明伶俐，在朝中享有“神童”的称号。
小时候的我天真活泼，才思敏捷，小河畔，花丛边撒满了我的诗我的笑，无可置疑，小时侯的我快乐无虑。
“兴尽晚回舟，误入藕花深处。
争渡，争渡，惊起一滩鸥鹭。
”青春的我如同一只小鸟，自由自在，没有约束，少女纯净的心灵常在朝阳小，流水也被自然洗礼，纤细的手指拈一束花，轻抛入水，随波荡漾，发髻上沾着晶莹的露水，双脚任水流轻抚。
身影轻飘而过，留下一阵清风。
可是晚年的我却生活在一片黑暗之中，家庭的衰败，社会的改变，消磨着我那柔弱的心。
我几乎对生活绝望，每天在痛苦中消磨时光，一切都好象是灰暗的。
“寻寻觅觅冷冷清清凄凄惨惨戚戚”这千古叠词句就是我当时心情的写照。
最后，香消玉殒，我在痛苦和哀怨中凄凉的死去。
在天堂里，我又见到了上帝。
上帝问我过的怎么样，我摇摇头又点点头，我的一生有欢乐也有坎坷，有笑声也有泪水，有鼎盛也有衰落。
我始终无法客观的评价我的一生。
我原以为做一个着名的人，一生应该是被欢乐荣誉所包围，可我发现我错了。
于是在下一轮回中，我选择做一个平凡的人。
我来到人间，我是一个平凡的人，我既不着名也不出众，但我拥有一切的幸福：我有温馨的家，我有可亲可爱的同学和老师，我每天平凡而快乐的活着，这就够了。
天儿蓝蓝风儿轻轻，暖和的春风带着春的气息吹进明亮的教室，我坐在教室的窗前，望着我拥有的一切，我甜甜的笑了。
我拿起手中的笔，不禁想起曾经作诗的李清照，我虽然没有横溢的才华，但我还是拿起手中的笔，用最朴实的语言，写下了一时的感受：人生并不总是完美的，每个人都会有不如意的地方。
这就需要我们静下心来阅读自己的人生，体会其中无尽的快乐和与众不同。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
科喜洁身器是具有冲洗人体下身排便部位的功能并可充当坐便器坐圈使用且与坐便器配套使用的装置。
洁身器功能
1、通用冲洗：喷头喷出温水，对人体进行便前润肠、省力排便、便后的清洗的作用。
2、女性专用：独立喷头专为女性而设计，喷头多孔对女性下体部位进行清洗。
3、缓降上盖：采用进口的阻尼装置，降落均匀、可轻松抬起、快按下不反弹、无噪音耐用。
4、缓降坐圈：采用进口的阻尼装置，降落均匀、可轻松抬起、快按下不反弹、无噪音耐用。
5、坐圈抗菌：坐圈采用抗菌合成材料，常使用时频繁接触部位病菌交叉感染。
6、温暖坐圈：通过按键控制，使坐圈保持设定的温度人体工程学设计。
7、喷头自洁：喷头伸出和缩回时，自动喷出小股水流对喷头进行自动清洁。
8、冷水放出：冲洗之前时，先自动流出水箱于出水管之间的冷水，保证开始就用温水。
9、自动复位：在清洗完后，出水管自动回位。
10、水温调节：通过按键控制冲洗水的温度。
11、过滤装置：自来水，在进入水箱时，装有精密过滤网装置。
12、喷头调位：通过按键控制喷头出水的前后位置。
可使清洁更加舒适。
13、通电补水：在能通电情况下，水箱行动补水。
水箱在补满后自动停止。
14、防无水加热：在无水的情况下电路控制不加热。
15、水压调节：通过按键自动控制水压的强弱。