毕业论文外文翻译
毕业论文(设计)外文文献翻译及原文
金融体制、融资约束与投资——来自OECD的实证分析R．SemenovDepartment of Economics，University of Nijmegen，Nijmegen（荷兰内梅亨大学，经济学院）这篇论文考查了OECD的11个国家中现金流量对企业投资的影响.我们发现不同国家之间投资对企业内部可获取资金的敏感性具有显著差异,并且银企之间具有明显的紧密关系的国家的敏感性比银企之间具有公平关系的国家的低.同时，我们发现融资约束与整体金融发展指标不存在关系.我们的结论与资本市场信息和激励问题对企业投资具有重要作用这种观点一致，并且紧密的银企关系会减少这些问题从而增加企业获取外部融资的渠道。
一、引言各个国家的企业在显著不同的金融体制下运行。
金融发展水平的差别(例如，相对GDP的信用额度和相对GDP的相应股票市场的资本化程度），在所有者和管理者关系、企业和债权人的模式中，企业控制的市场活动水平可以很好地被记录.在完美资本市场,对于具有正的净现值投资机会的企业将一直获得资金。
然而，经济理论表明市场摩擦，诸如信息不对称和激励问题会使获得外部资本更加昂贵，并且具有盈利投资机会的企业不一定能够获取所需资本.这表明融资要素，例如内部产生资金数量、新债务和权益的可得性，共同决定了企业的投资决策.现今已经有大量考查外部资金可得性对投资决策的影响的实证资料（可参考，例如Fazzari（1998）、 Hoshi(1991)、 Chapman（1996）、Samuel(1998））.大多数研究结果表明金融变量例如现金流量有助于解释企业的投资水平。
这项研究结果解释表明企业投资受限于外部资金的可得性。
很多模型强调运行正常的金融中介和金融市场有助于改善信息不对称和交易成本，减缓不对称问题,从而促使储蓄资金投着长期和高回报的项目,并且提高资源的有效配置（参看Levine（1997)的评论文章）。
因而我们预期用于更加发达的金融体制的国家的企业将更容易获得外部融资.几位学者已经指出建立企业和金融中介机构可进一步缓解金融市场摩擦。
如何进行毕业论文的外文翻译与写作
如何进行毕业论文的外文翻译与写作毕业论文的外文翻译和写作是研究生阶段的重要任务之一。
合理的研究方法和专业的写作技巧对于提高论文的质量和学术水平非常关键。
本文将介绍如何进行毕业论文的外文翻译与写作，以帮助学生顺利完成研究任务。
一、外文翻译1. 确定翻译目标：在开始翻译之前，必须明确翻译的目标语言是什么。
对于大部分中国学生而言，目标语言通常是中文。
确保自己熟练掌握外文的语法和词汇才能进行准确的翻译。
2. 分析文本结构：在翻译之前，要仔细分析外文文本的结构，了解作者的思路和论证方式。
将文本分段，并记录下每个段落的主题和核心内容，可以帮助翻译更加准确和有条理。
3. 词汇理解与选择：外文翻译中最常见的问题就是词汇的理解和选择。
要尽量保持原文的句子结构和逻辑关系，并根据上下文来选择合适的词汇。
同时，还要注意一些专业名词和术语的翻译，确保准确传达作者的意思。
4. 翻译修改与润色：在翻译完成后，要进行翻译修改和润色。
可以与导师或其他专业人士讨论，确认翻译是否准确并且符合论文的写作目标和风格。
二、外文写作1. 熟悉论文结构：在进行外文写作之前，要了解毕业论文的结构和要求。
例如，引言、文献综述、方法、结果和讨论等部分的写作方式和顺序。
2. 论文提纲的制定：根据自己的研究内容和结构安排，制定一份清晰的提纲。
提纲是论文写作的框架，在写作过程中可以帮助你组织思路和整理论证材料。
3. 文章段落的组织：无论是中文还是外文写作，良好的段落组织非常重要。
每个段落应该有明确的主题句，并展开论述，最后进行总结或过渡。
段落之间的逻辑关系和过渡词语也要特别注意。
4. 语法和拼写的检查：外文写作需要特别注意语法和拼写的准确性。
严谨的语法和正确的拼写可以提高论文的可读性和学术性。
5. 学术风格和引用格式的使用：在进行外文写作时，要遵循学术风格和引用格式的要求。
例如，使用正确的引用格式引用文献资料，并避免抄袭和剽窃的行为。
总结：毕业论文的外文翻译与写作需要综合运用语言能力、专业知识和写作技巧。
本科毕业论文外文翻译
本科毕业论文外文翻译Undergraduate Thesis External Translation (700 Words)Title: The Impact of Social Media on Consumer Behavior Abstract:With the rapid development of social media, its influence on consumer behavior has drawn increasing attention from scholars and marketers. This paper aims to explore the impact of social media on consumer behavior from the perspective of information acquisition, interpersonal communication, and brand evaluation. Through a literature review and analysis, it is found that social media has a significant impact on consumer behavior by providing easy access to information, facilitating communication between consumers, and influencing brand perception. This research provides valuable insights for marketers in understanding and utilizing social media platforms to effectively engage with consumers and influence their purchasing decisions.1. IntroductionSocial media has become an integral part of people's daily lives, and its impact on consumer behavior cannot be ignored. This paper aims to investigate the impact of social media on consumer behavior and provide practical implications for marketers. The research question is: How does social media influence consumer behavior in terms of information acquisition, interpersonal communication, and brand evaluation?2. Information Acquisition2.1 Social media provides a platform for consumers to easilyaccess information about products and services. Through social media platforms such as Facebook, Instagram, and Twitter, consumers can obtain product reviews, comparisons, and recommendations from peers. This information influences consumers' purchasing decisions and enhances their knowledge about products.2.2 Social media also serves as a source of entertainment and inspiration, enabling users to discover new trends and products. Influencers and celebrities, who gain popularity through social media, often endorse products and create consumer desire for these items. This form of indirect advertising through social media has a significant impact on consumer behavior.3. Interpersonal CommunicationSocial media platforms enable users to interact with friends, family, and even strangers. This communication aspect of social media hasa direct influence on consumer behavior.3.1 Word-of-mouth (WOM) communication through social media is prevalent. Consumers often share their positive or negative experiences with products on social media platforms, which influence others' opinions and purchasing decisions. These online conversations have a wide reach and can greatly impact brand perception.3.2 Social media facilitates communication between consumers and brands. Consumers can directly communicate with brands through social media channels, providing feedback, asking questions, and seeking assistance. This two-way communicationimproves customer satisfaction and loyalty.4. Brand Evaluation4.1 Social media plays a crucial role in brand evaluation. Consumers often seek information about brands, their values, and their reputation on social media platforms. Positive or negative brand mentions and reviews on social media greatly influence consumers' perceptions of brands, leading to either increased or decreased brand trust and loyalty.4.2 Social media influencers and celebrities endorsing particular brands also impact brand evaluation. These individuals' recommendations and opinions can greatly influence consumers' perceptions and preferences for specific brands.5. ConclusionIn conclusion, social media has a significant impact on consumer behavior by influencing information acquisition, interpersonal communication, and brand evaluation. Marketers should utilize and engage with social media platforms to effectively reach and influence their target customers. This research provides insights for marketers to enhance their social media strategies and create effective brand-consumer interactions.。
毕业论文 外文翻译格式
毕业论文外文翻译格式毕业论文外文翻译格式在撰写毕业论文时，外文翻译是一个重要的环节。
无论是引用外文文献还是翻译相关内容，都需要遵循一定的格式和规范。
本文将介绍一些常见的外文翻译格式，并探讨其重要性和应用。
首先，对于引用外文文献的格式，最常见的是使用APA（American Psychological Association）格式。
这种格式要求在引用外文文献时，先列出作者的姓氏和名字的首字母，然后是出版年份、文章标题、期刊名称、卷号和页码。
例如：Smith, J. D. (2010). The impact of climate change on biodiversity. Environmental Science, 15(2), 145-156.在翻译外文文献时，需要注意保持原文的准确性和完整性。
尽量避免意译或添加自己的解释，以免歪曲原文的意思。
同时，还需要在翻译后的文献后面加上“译者”和“翻译日期”的信息，以便读者可以追溯翻译的来源和时间。
其次，对于翻译相关内容的格式，可以参考国际标准组织ISO（International Organization for Standardization）的格式。
这种格式要求在翻译相关内容时，先列出原文，然后是翻译后的文本。
例如：原文：The importance of effective communication in the workplace cannot be overstated.翻译：工作场所有效沟通的重要性不容忽视。
在翻译相关内容时，需要注意保持原文的意思和语气。
尽量使用准确的词汇和语法结构，以便读者能够理解和接受翻译后的内容。
同时，还需要在翻译后的文本后面加上“翻译者”和“翻译日期”的信息，以便读者可以追溯翻译的来源和时间。
此外，对于长篇外文文献的翻译，可以考虑将其分成若干章节，并在每个章节前面加上章节标题。
这样可以使读者更容易理解和阅读翻译后的内容。
毕业设计论文外文文献翻译
毕业设计(论文）外文文献翻译院系：财务与会计学院年级专业：201＊级财务管理姓名:学号：132148*＊*附件: 财务风险管理【Abstract】Although financial risk has increased significantly in recent years risk and risk management are not contemporary issues。
The result of increasingly global markets is that risk may originate with events thousands of miles away that have nothing to do with the domestic market。
Information is available instantaneously which means that change and subsequent market reactions occur very quickly。
The economic climate and markets can be affected very quickly by changes in exchange rates interest rates and commodity prices。
Counterparties can rapidly become problematic。
As a result it is important to ensure financial risks are identified and managed appropriately. Preparation is a key component of risk management。
【Key Words】Financial risk，Risk management，YieldsI. Financial risks arising1.1What Is Risk1.1.1The concept of riskRisk provides the basis for opportunity. The terms risk and exposure have subtle differences in their meaning. Risk refers to the probability of loss while exposure is the possibility of loss although they are often used interchangeably。
毕业论文外文翻译两篇
毕业论文外文翻译两篇篇一：毕业论文外文翻译外文资料翻译译文：概述是一个统一的Web开发模型，它包括您使用尽可能少的代码生成企业级Web应用程序所必需的各种服务。
作为.NETFramework的一部分提供。
当您编写应用程序的代码时，可以访问.NETFramework中的类。
您可以使用与公共语言运行库(CLR)兼容的任何语言来编写应用程序的代码，这些语言包括MicrosoftVisualBasic、C#、和J#。
使用这些语言，可以开发利用公共语言运行库、类型安全、继承等方面的优点的应用程序。
包括：∙页和控件框架∙编译器∙安全基础结构∙状态管理功能∙应用程序配置∙运行状况监视和性能功能∙调试支持∙XMLWebservices框架∙可扩展的宿主环境和应用程序生命周期管理∙可扩展的设计器环境页和控件框架是一种编程框架，它在Web服务器上运行，可以动态地生成和呈现网页。
可以从任何浏览器或客户端设备请求网页，会向请求浏览器呈现标记（例如HTML）。
通常，您可以对多个浏览器使用相同的页，因为会为发出请求的浏览器呈现适当的标记。
但是，您可以针对诸如MicrosoftInternetExplorer6的特定浏览器设计网页，并利用该浏览器的功能。
支持基于Web的设备（如移动电话、手持型计算机和个人数字助理(PDA)）的移动控件。
网页是完全面向对象的。
在网页中，可以使用属性、方法和事件来处理HTML元素。
页框架为响应在服务器上运行的代码中的客户端事件提供统一的模型，从而使您不必考虑基于Web的应用程序中固有的客户端和服务器隔离的实现细节。
该框架还会在页处理生命周期中自动维护页及该页上控件的状态。
使用页和控件框架还可以将常用的UI功能封装成易于使用且可重用的控件。
控件只需编写一次，即可用于许多页并集成到网页中。
这些控件在呈现期间放入网页中。
页和控件框架还提供各种功能，以便可以通过主题和外观来控制网站的整体外观和感觉。
可以先定义主题和外观，然后在页面级或控件级应用这些主题和外观。
毕业论文外文翻译报告范文
毕业论文外文翻译报告范文AbstractThis report presents a translation of an academic article titled "The Impact of Technology on Education." The article discusses the various ways in which technology has transformed the field of education, particularly in terms of teaching methods, student engagement, and access to educational resources. The translation aims to accurately convey the content and meaning of the original article, while ensuring clarity and coherence for the readers.IntroductionTechnology has revolutionized nearly every aspect of our lives, including the field of education. In recent years, there has been a significant increase in the use of technology in classrooms and educational institutions worldwide. This article explores the impact of technology on education, highlighting its benefits and potential challenges.Teaching MethodsOne of the key effects of technology on education is the transformation of traditional teaching methods. With the introduction of interactive whiteboards, online learning platforms, and educational apps, teachers now have access to a wide range of tools and resources to enhance their teaching. These technologies enable teachers to create dynamic and engaging lessons, integrating multimedia content and interactive activities, which enhance student understanding and participation.Student EngagementTechnology has also had a profound impact on student engagement in the learning process. With the use of digital tools, students can now actively participate in their education and take ownership of their learning. Interactive quizzes, online discussions, and collaborative projects allow students to actively engage with the subject matter, promoting critical thinking and problem-solving skills. Moreover, technology enables personalized learning experiences, catering to individual student needs and preferences.Access to Educational ResourcesAnother significant benefit of technology in education is the increased access to educational resources. Online libraries, open educational resources, and digital textbooks provide students with a vast amount of information at their fingertips. This access to a wide range of resources goes beyond what traditional textbooks and classrooms can offer, empowering students to explore and learn at their own pace.Challenges and ConsiderationsWhile the impact of technology on education is largely positive, there are also some challenges and considerations that need to be addressed. One concern is the potential for technology to create a divide between students who have access to technology and those who do not. It is essential to ensure equitable access to technology and training for all students to prevent further disparities in education.Additionally, the integration of technology in the classroom requires teachers to adapt and acquire new technological skills. Adequate training and support must be provided to empower teachers to effectively incorporate technology into their teaching practices.ConclusionIn conclusion, technology has had a transformative impact on education. It has revolutionized teaching methods, enhanced student engagement, and provided increased access to educational resources. However, it is important to address the challenges and considerations that arise with the integration of technology in education. By doing so, we can ensure that technology continues to benefit and enhance the learning experience for all students.References:[Original Article Reference]。
毕业设计(论文)外文翻译
华南理工大学广州学院本科生毕业设计（论文）翻译外文原文名Agency Cost under the Restriction of Free Cash Flow中文译名自由现金流量的限制下的代理成本学院管理学院专业班级会计学3班学生姓名陈洁玉学生学号200930191100指导教师余勍讲师填写日期2015年5月11日外文原文版出处：译文成绩：指导教师（导师组长）签名：译文：自由现金流量的限制下的代理成本摘要代理成本理论是资本结构理论的一个重要分支。
自由现金流代理成本有显着的影响。
在这两个领域相结合的研究，将有助于建立和扩大理论体系。
代理成本理论基础上，本研究首先分类自由现金流以及统计方法的特点。
此外，投资自由现金流代理成本的存在证明了模型。
自由现金流代理成本理论引入限制，分析表明，它会改变代理成本，进而将影响代理成本和资本结构之间的关系，最后，都会影响到最优资本结构点，以保持平衡。
具体地说，自由现金流增加，相应地，债务比例会降低。
关键词：资本结构，现金流，代理成本，非金钱利益1、介绍代理成本理论，金融契约理论，信号模型和新的啄食顺序理论，新的资本结构理论的主要分支。
财务con-道的理论侧重于限制股东的合同行为，解决股东和债权人之间的冲突。
信令模式和新的啄食顺序理论中心解决投资者和管理者之间的冲突。
这两种类型的冲突是在商业组织中的主要冲突。
代理成本理论认为，如何达到平衡这两种类型的冲突，资本结构是如何形成的，这是比前两次在一定程度上更多的理论更全面。
……Agency Cost under the Restriction of Free Cash FlowAbstractAgency cost theory is an important branch of capital structural theory. Free cash flow has significant impact on agency cost. The combination of research on these two fields would help to build and extend the theoretical system. Based on agency cost theory, the present study firstly categorized the characteristics of free cash flow as well as the statistical methodologies. Furthermore, the existence of investing free cash flow in agency cost was proved by a model. Then free cash flow was introduced into agency cost theory as restriction, the analysis shows that it will change agency cost, in turn, will have an impact on the relationship between agency cost and capital structure, finally, will influence the optimal capital structure point to maintain the equilibrium. Concretely, with the increasing free cash flow, correspondingly, debt proportion will decrease.Keywords:Capital Structure,Free Cash Flow,Agency Cost,Non-Pecuniary Benefit1. IntroductionAgency cost theory, financial contract theory, signaling model and new pecking order theory are the main branches of new capital structure theory. Financial con-tract theory focuses on restricting stockholders’ behavior by contract and solving the conflict between stockholders and creditors. Signaling model and new pecking order theory center on solving the conflict between investors and managers. These two types of conflict are the main conflict in business organizations. Agency cost theory considers how equilibrium is reached in both types of conflict and how capital structure is formed, which is more theory is more comprehensive than the previous two to some degree.……。
毕业论文用英语怎么说
毕业论文用英语怎么说thesis英 [ˈθi:sis] 美 [ˈθisɪs]dissertation英 [prəˈdʒekt] 美 [prəˈdʒɛkt]Graduation thesis关于毕业论文，我们能提供MBA论文，EMBA论文，经济学论文，金融学论文，法学论文，会计学论文，英语学论文，建筑学论文和药理学论文。
Regarding to graduate thesis, we can provide MBA thesis, EMBAthesis, economy thesis, finance thesis, law thesis, accounting thesis, English thesis architecture thesis, medical science.进入栏目免费论文付费论文职称论文毕业论文转让论文论文指导外文翻译检测论文传统的师范生培养模式存在一定弊端，不能适应日益严峻的就业形势。
Under the new conditions, the disadvantages of the traditional mode of training in normal schools emerge, failing to meet the severe challenge of employment.进入栏目免费论文付费论文职称论文毕业论文转让论文论文指导外文翻译检测论文高师开设形体训练课，符合高师女生的生理、心理特点，是时代的需求。
The setting-up of the physique class fits the physical and psychological characteristics of female students in normal college students, and is also the requirement of the era.进入栏目免费论文付费论文职称论文毕业论文转让论文论文指导外文翻译检测论文我国冬季两项运动有着悠久的历史，最初的冬季两项运动是以木板或是毛皮及弓箭为工具在雪上进行狩猎的活动，它是古代人类一种生产生活方式。
什么是毕业论文的外文翻译
什么是毕业论文的外文翻译毕业论文是大学生在完成学业之前必须完成的一项重要任务。
它是对所学专业知识的综合运用和创新发展的体现，也是对学生研究能力和学术水平的考验。
在撰写毕业论文的过程中，外文翻译是不可或缺的一环。
那么，什么是毕业论文的外文翻译？它的作用和意义又是什么呢？首先，毕业论文的外文翻译是指将相关外文文献或资料翻译成母语或所学语言的过程。
在撰写毕业论文的过程中，我们常常需要参考国外的学术研究成果和相关资料，这些外文文献往往包含了前沿的理论观点、方法和实证研究结果。
通过将这些外文文献翻译成母语或所学语言，我们可以更好地理解和运用这些知识，从而提升自己的研究水平和学术能力。
其次，毕业论文的外文翻译具有重要的作用和意义。
首先，它可以帮助我们了解国外学术界的最新动态和研究进展。
随着全球化的进程，学术界的交流与合作日益频繁，国外的学术研究成果对于我们的研究和学习具有重要的参考价值。
通过翻译国外的学术文献，我们可以及时了解到最新的理论观点和研究成果，从而拓宽自己的研究思路和视野。
其次，外文翻译还可以提高我们的语言能力和翻译技巧。
在翻译的过程中，我们需要理解原文的意思并准确地表达出来，这对于我们的语言理解和表达能力是一种很好的锻炼。
同时，翻译也需要我们具备一定的翻译技巧和方法，如准确把握上下文、辨别词义和语法结构等。
通过不断地进行外文翻译，我们可以提高自己的语言素养和翻译水平，为将来的学术研究和职业发展打下坚实的基础。
此外，毕业论文的外文翻译还可以促进学术交流和合作。
在翻译的过程中，我们不仅要理解原文的意思，还要将其准确地传达给读者。
通过与他人交流和讨论，我们可以进一步深化对研究问题的理解和认识，从而提高自己的研究水平和学术能力。
同时，外文翻译还可以促进国内外学者之间的学术交流和合作，为学术界的发展和进步做出积极的贡献。
最后，毕业论文的外文翻译需要我们具备一定的专业知识和翻译技巧。
在进行外文翻译时，我们需要对所翻译的领域有一定的了解和掌握，以确保翻译的准确性和专业性。
毕业论文外文翻译
毕业论文外文翻译以下是关于毕业论文700字的外文翻译：Title: The Impact of Artificial Intelligence on the Job Market Introduction:Artificial Intelligence (AI) refers to the development of computer systems that can perform tasks that would normally require human intelligence, such as speech recognition, decision-making, and problem-solving. With advances in technology, AI has become more prominent in various industries, and its impact on the job market has drawn significant attention.Body:1. Automation and Job Displacement:AI has been widely adopted in the automation of certain tasks across industries. For instance, AI-powered machines can handle repetitive tasks more efficiently and accurately than humans, leading to job displacement in certain sectors. Industries such as manufacturing, transportation, and customer service have already seen significant impacts, with robots and virtual agents replacing human workers.2. Job Creation and Augmentation:While AI may displace certain jobs, it also has the potential to create new ones and augment existing ones. The development and implementation of AI systems require skilled professionals in various domains, such as data science, programming, and machine learning. Additionally, AI can enhance human capabilities by augmenting decision-making processes and providing valuableinsights.3. Skill Shifts and Reskilling:With the rapid advancement of AI, certain skills may become less in demand while others may become more valuable. For example, skills such as data analysis, coding, and problem-solving are becoming increasingly important in the AI-driven job market. As a result, individuals may need to reskill or upskill to remain competitive in the workforce.4. Impact on Specific Industries:Certain industries are expected to be significantly impacted by AI. For instance, the healthcare industry can benefit from AI-powered diagnostic tools and predictive models. Likewise, the finance industry can leverage AI to improve fraud detection and risk assessment. However, these advancements may also lead to job displacement in certain roles, such as medical coders and financial analysts.Conclusion:The growth of AI technology has both positive and negative impacts on the job market. While it may lead to job displacement in certain sectors, it also has the potential to create new job opportunities and augment existing ones. In order to adapt to the changing job market, individuals may need to acquire new skills and embrace lifelong learning. Policymakers also have a role to play in facilitating the transition and ensuring the benefits of AI are distributed equitably.。
毕业设计论文外文文献翻译智能交通信号灯控制中英文对照
英语原文Intelligent Traffic Light Controlby Marco Wiering The topic I picked for our community project was traffic lights. In a community, people need stop signs and traffic lights to slow down drivers from going too fast. If there were no traffic lights or stop signs, people’s lives would be in danger from drivers going too fast.The urban traffic trends towards the saturation, the rate of increase of the road of big city far lags behind rate of increase of the car.The urban passenger traffic has already become the main part of city traffic day by day and it has used about 80% of the area of road of center district. With the increase of population and industry activity, people's traffic is more and more frequent, which is unavoidable. What means of transportation people adopt produces pressure completely different to city traffic. According to calculating, if it is 1 to adopt the area of road that the public transport needs, bike needs 5-7, car needs 15-25, even to walk is 3 times more than to take public transits. So only by building road can't solve the city traffic problem finally yet. Every large city of the world increases the traffic policy to the first place of the question.For example，according to calculating, when the automobile owning amount of Shanghai reaches 800,000 (outside cars count separately ), if it distributes still as now for example: center district accounts for great proportion, even when several loop-lines and arterial highways have been built up , the traffic cannot be improved more than before and the situation might be even worse. So the traffic policy Shanghai must adopt , or called traffic strategy is that have priority to develop public passenger traffic of city, narrow the scope of using of the bicycle progressively , control the scale of growth of the car traffic in the center district, limit the development of the motorcycle strictly.There are more municipals project under construction in big city. the influence on the traffic is greater.Municipal infrastructure construction is originally a good thing of alleviating the traffic, but in the course of constructing, it unavoidably influence the local traffic. Some road sections are blocked, some change into an one-way lane, thus the vehicle can only take a devious route . The construction makes the road very narrow, forming the bottleneck, which seriously influence the car flow.When having stop signs and traffic lights, people have a tendency to drive slower andlook out for people walking in the middle of streets. To put a traffic light or a stop sign in a community, it takes a lot of work and planning from the community and the city to put one in. It is not cheap to do it either. The community first needs to take a petition around to everyone in the community and have them sign so they can take it to the board when the next city council meeting is. A couple residents will present it to the board, and they will decide weather or not to put it in or not. If not put in a lot of residents might be mad and bad things could happened to that part of the city.When the planning of putting traffic lights and stop signs, you should look at the subdivision plan and figure out where all the buildings and schools are for the protection of students walking and riding home from school. In our plan that we have made, we will need traffic lights next to the school, so people will look out for the students going home. We will need a stop sign next to the park incase kids run out in the street. This will help the protection of the kids having fun. Will need a traffic light separating the mall and the store. This will be the busiest part of the town with people going to the mall and the store. And finally there will need to be a stop sign at the end of the streets so people don’t drive too fast and get in a big accident. If this is down everyone will be safe driving, walking, or riding their bikes.In putting in a traffic light, it takes a lot of planning and money to complete it. A traffic light cost around $40,000 to $125,000 and sometimes more depending on the location. If a business goes in and a traffic light needs to go in, the business or businesses will have to pay some money to pay for it to make sure everyone is safe going from and to that business. Also if there is too many accidents in one particular place in a city, a traffic light will go in to safe people from getting a severe accident and ending their life and maybe someone else’s.The reason I picked this part of our community development report was that traffic is a very important part of a city. If not for traffic lights and stop signs, people’s lives would be in danger every time they walked out their doors. People will be driving extremely fast and people will be hit just trying to have fun with their friends. So having traffic lights and stop signs this will prevent all this from happening.Traffic in a city is very much affected by traffic light controllers. When waiting for a traffic light, the driver looses time and the car uses fuel. Hence, reducing waiting times before traffic lights can save our European society billions of Euros annually. To make traffic light controllers more intelligent, we exploit the emergence of novel technologies such as communication networks and sensor networks, as well as the use of more sophisticated algorithms for setting traffic lights. Intelligent traffic light control does not only mean thattraffic lights are set in order to minimize waiting times of road users, but also that road users receive information about how to drive through a city in order to minimize their waiting times. This means that we are coping with a complex multi-agent system, where communication and coordination play essential roles. Our research has led to a novel system in which traffic light controllers and the behaviour of car drivers are optimized using machine-learning methods.Our idea of setting a traffic light is as follows. Suppose there are a number of cars with their destination address standing before a crossing. All cars communicate to the traffic light their specific place in the queue and their destination address. Now the traffic light has to decide which option (ie, which lanes are to be put on green) is optimal to minimize the long-term average waiting time until all cars have arrived at their destination address. The learning traffic light controllers solve this problem by estimating how long it would take for a car to arrive at its destination address (for which the car may need to pass many different traffic lights) when currently the light would be put on green, and how long it would take if the light would be put on red. The difference between the waiting time for red and the waiting time for green is the gain for the car. Now the traffic light controllers set the lights in such a way to maximize the average gain of all cars standing before the crossing. To estimate the waiting times, we use 'reinforcement learning' which keeps track of the waiting times of individual cars and uses a smart way to compute the long term average waiting times using dynamic programming algorithms. One nice feature is that the system is very fair; it never lets one car wait for a very long time, since then its gain of setting its own light to green becomes very large, and the optimal decision of the traffic light will set his light to green. Furthermore, since we estimate waiting times before traffic lights until the destination of the road user has been reached, the road user can use this information to choose to which next traffic light to go, thereby improving its driving behaviour through a city. Note that we solve the traffic light control problem by using a distributed multi-agent system, where cooperation and coordination are done by communication, learning, and voting mechanisms. To allow for green waves during extremely busy situations, we combine our algorithm with a special bucket algorithm which propagates gains from one traffic light to the next one, inducing stronger voting on the next traffic controller option.We have implemented the 'Green Light District', a traffic simulator in Java in which infrastructures can be edited easily by using the mouse, and different levels of road usage can be simulated. A large number of fixed and learning traffic light controllers have already been tested in the simulator and the resulting average waiting times of cars have been plotted and compared. The results indicate that the learning controllers can reduce average waiting timeswith at least 10% in semi-busy traffic situations, and even much more when high congestion of the traffic occurs.We are currently studying the behaviour of the learning traffic light controllers on many different infrastructures in our simulator. We are also planning to cooperate with other institutes and companies in the Netherlands to apply our system to real world traffic situations. For this, modern technologies such as communicating networks can be brought to use on a very large scale, making the necessary communication between road users and traffic lights possible.中文翻译：智能交通信号灯控制马克·威宁我所选择的社区项目主题是交通灯。
毕业设计论文外文文献翻译
xxxx大学xxx学院毕业设计（论文）外文文献翻译系部xxxx专业xxxx学生姓名xxxx 学号xxxx指导教师xxxx 职称xxxx2013年3 月Introducing the Spring FrameworkThe Spring Framework: a popular open source application framework that addresses many of the issues outlined in this book. This chapter will introduce the basic ideas of Spring and dis-cuss the central “bean factory” lightweight Inversion-of-Control (IoC) container in detail.Spring makes it particularly easy to implement lightweight, yet extensible, J2EE archi-tectures. It provides an out-of-the-box implementation of the fundamental architectural building blocks we recommend. Spring provides a consistent way of structuring your applications, and provides numerous middle tier features that can make J2EE development significantly easier and more flexible than in traditional approaches.The basic motivations for Spring are:To address areas not well served by other frameworks. There are numerous good solutions to specific areas of J2EE infrastructure: web frameworks, persistence solutions, remoting tools, and so on. However, integrating these tools into a comprehensive architecture can involve significant effort, and can become a burden. Spring aims to provide an end-to-end solution, integrating spe-cialized frameworks into a coherent overall infrastructure. Spring also addresses some areas that other frameworks don’t. For example, few frameworks address generic transaction management, data access object implementation, and gluing all those things together into an application, while still allowing for best-of-breed choice in each area. Hence we term Spring an application framework, rather than a web framework, IoC or AOP framework, or even middle tier framework.To allow for easy adoption. A framework should be cleanly layered, allowing the use of indi-vidual features without imposing a whole worldview on the application. Many Spring features, such as the JDBC abstraction layer or Hibernate integration, can be used in a library style or as part of the Spring end-to-end solution.To deliver ease of use. As we’ve noted, J2EE out of the box is relatively hard to use to solve many common problems. A good infrastructure framework should make simple tasks simple to achieve, without forcing tradeoffs for future complex requirements (like distributed transactions) on the application developer. It should allow developers to leverage J2EE services such as JTA where appropriate, but to avoid dependence on them in cases when they are unnecessarily complex.To make it easier to apply best practices. Spring aims to reduce the cost of adhering to best practices such as programming to interfaces, rather than classes, almost to zero. However, it leaves the choice of architectural style to the developer.Non-invasiveness. Application objects should have minimal dependence on the framework. If leveraging a specific Spring feature, an object should depend only on that particular feature, whether by implementing a callback interface or using the framework as a class library. IoC and AOP are the key enabling technologies for avoiding framework dependence.Consistent configuration. A good infrastructure framework should keep application configuration flexible and consistent, avoiding the need for custom singletons and factories. A single style should be applicable to all configuration needs, from the middle tier to web controllers.Ease of testing. Testing either whole applications or individual application classes in unit tests should be as easy as possible. Replacing resources or application objects with mock objects should be straightforward.To allow for extensibility. Because Spring is itself based on interfaces, rather than classes, it is easy to extend or customize it. Many Spring components use strategy interfaces, allowing easy customization.A Layered Application FrameworkChapter 6 introduced the Spring Framework as a lightweight container, competing with IoC containers such as PicoContainer. While the Spring lightweight container for JavaBeans is a core concept, this is just the foundation for a solution for all middleware layers.Basic Building Blockspring is a full-featured application framework that can be leveraged at many levels. It consists of multi-ple sub-frameworks that are fairly independent but still integrate closely into a one-stop shop, if desired. The key areas are:Bean factory. The Spring lightweight IoC container, capable of configuring and wiring up Java-Beans and most plain Java objects, removing the need for custom singletons and ad hoc configura-tion. Various out-of-the-box implementations include an XML-based bean factory. The lightweight IoC container and its Dependency Injection capabilities will be the main focus of this chapter.Application context. A Spring application context extends the bean factory concept by adding support for message sources and resource loading, and providing hooks into existing environ-ments. Various out-of-the-box implementations include standalone application contexts and an XML-based web application context.AOP framework. The Spring AOP framework provides AOP support for method interception on any class managed by a Spring lightweight container.It supports easy proxying of beans in a bean factory, seamlessly weaving in interceptors and other advice at runtime. Chapter 8 dis-cusses the Spring AOP framework in detail. The main use of the Spring AOP framework is to provide declarative enterprise services for POJOs.Auto-proxying. Spring provides a higher level of abstraction over the AOP framework and low-level services, which offers similar ease-of-use to .NET within a J2EE context. In particular, the provision of declarative enterprise services can be driven by source-level metadata.Transaction management. Spring provides a generic transaction management infrastructure, with pluggable transaction strategies (such as JTA and JDBC) and various means for demarcat-ing transactions in applications. Chapter 9 discusses its rationale and the power and flexibility that it offers.DAO abstraction. Spring defines a set of generic data access exceptions that can be used for cre-ating generic DAO interfaces that throw meaningful exceptions independent of the underlying persistence mechanism. Chapter 10 illustrates the Spring support for DAOs in more detail, examining JDBC, JDO, and Hibernate as implementation strategies.JDBC support. Spring offers two levels of JDBC abstraction that significantly ease the effort of writing JDBC-based DAOs: the org.springframework.jdbc.core package (a template/callback approach) and the org.springframework.jdbc.object package (modeling RDBMS operations as reusable objects). Using the Spring JDBC packages can deliver much greater pro-ductivity and eliminate the potential for common errors such as leaked connections, compared with direct use of JDBC. The Spring JDBC abstraction integrates with the transaction and DAO abstractions.Integration with O/R mapping tools. Spring provides support classesfor O/R Mapping tools like Hibernate, JDO, and iBATIS Database Layer to simplify resource setup, acquisition, and release, and to integrate with the overall transaction and DAO abstractions. These integration packages allow applications to dispense with custom ThreadLocal sessions and native transac-tion handling, regardless of the underlying O/R mapping approach they work with.Web MVC framework. Spring provides a clean implementation of web MVC, consistent with the JavaBean configuration approach. The Spring web framework enables web controllers to be configured within an IoC container, eliminating the need to write any custom code to access business layer services. It provides a generic DispatcherServlet and out-of-the-box controller classes for command and form handling. Request-to-controller mapping, view resolution, locale resolution and other important services are all pluggable, making the framework highly extensi-ble. The web framework is designed to work not only with JSP, but with any view technology, such as Velocity—without the need for additional bridges. Chapter 13 discusses web tier design and the Spring web MVC framework in detail.Remoting support. Spring provides a thin abstraction layer for accessing remote services without hard-coded lookups, and for exposing Spring-managed application beans as remote services. Out-of-the-box support is inc luded for RMI, Caucho’s Hessian and Burlap web service protocols, and WSDL Web Services via JAX-RPC. Chapter 11 discusses lightweight remoting.While Spring addresses areas as diverse as transaction management and web MVC, it uses a consistent approach everywhere. Once you have learned the basic configuration style, you will be able to apply it in many areas. Resources, middle tier objects, and web components are all set up using the same bean configuration mechanism. You can combine your entireconfiguration in one single bean definition file or split it by application modules or layers; the choice is up to you as the application developer. There is no need for diverse configuration files in a variety of formats, spread out across the application.Spring on J2EEAlthough many parts of Spring can be used in any kind of Java environment, it is primarily a J2EE application framework. For example, there are convenience classes for linking JNDI resources into a bean factory, such as JDBC DataSources and EJBs, and integration with JTA for distributed transaction management. In most cases, application objects do not need to work with J2EE APIs directly, improving reusability and meaning that there is no need to write verbose, hard-to-test, JNDI lookups.Thus Spring allows application code to seamlessly integrate into a J2EE environment without being unnecessarily tied to it. You can build upon J2EE services where it makes sense for your application, and choose lighter-weight solutions if there are no complex requirements. For example, you need to use JTA as transaction strategy only if you face distributed transaction requirements. For a single database, there are alternative strategies that do not depend on a J2EE container. Switching between those transac-tion strategies is merely a matter of configuration; Spring’s consistent abstraction avoids any need to change application code.Spring offers support for accessing EJBs. This is an important feature (and relevant even in a book on “J2EE without EJB”) because the u se of dynamic proxies as codeless client-side business delegates means that Spring can make using a local stateless session EJB an implementation-level, rather than a fundamen-tal architectural, choice.Thus if you want to use EJB, you can within a consistent architecture; however, you do not need to make EJB the cornerstone of your architecture. This Spring feature can make devel-oping EJB applications significantly faster, because there is no need to write custom code in service loca-tors or business delegates. Testing EJB client code is also much easier, because it only depends on the EJB’s Business Methods interface (which is not EJB-specific), not on JNDI or the EJB API.Spring also provides support for implementing EJBs, in the form of convenience superclasses for EJB implementation classes, which load a Spring lightweight container based on an environment variable specified in the ejb-jar.xml deployment descriptor. This is a powerful and convenient way of imple-menting SLSBs or MDBs that are facades for fine-grained POJOs: a best practice if you do choose to implement an EJB application. Using this Spring feature does not conflict with EJB in any way—it merely simplifies following good practice.Introducing the Spring FrameworkThe main aim of Spring is to make J2EE easier to use and promote good programming practice. It does not reinvent the wheel; thus you’ll find no logging packages in Spring, no connection pools, no distributed transaction coordinator. All these features are provided by other open source projects—such as Jakarta Commons Logging (which Spring uses for all its log output), Jakarta Commons DBCP (which can be used as local DataSource), and ObjectWeb JOTM (which can be used as transaction manager)—or by your J2EE application server. For the same reason, Spring doesn’t provide an O/R mapping layer: There are good solutions for this problem area, such as Hibernate and JDO.Spring does aim to make existing technologies easier to use. For example, although Spring is not in the business of low-level transactioncoordination, it does provide an abstraction layer over JTA or any other transaction strategy. Spring is also popular as middle tier infrastructure for Hibernate, because it provides solutions to many common issues like SessionFactory setup, ThreadLocal sessions, and exception handling. With the Spring HibernateTemplate class, implementation methods of Hibernate DAOs can be reduced to one-liners while properly participating in transactions.The Spring Framework does not aim to replace J2EE middle tier services as a whole. It is an application framework that makes accessing low-level J2EE container ser-vices easier. Furthermore, it offers lightweight alternatives for certain J2EE services in some scenarios, such as a JDBC-based transaction strategy instead of JTA when just working with a single database. Essentially, Spring enables you to write appli-cations that scale down as well as up.Spring for Web ApplicationsA typical usage of Spring in a J2EE environment is to serve as backbone for the logical middle tier of a J2EE web application. Spring provides a web application context concept, a powerful lightweight IoC container that seamlessly adapts to a web environment: It can be accessed from any kind of web tier, whether Struts, WebWork, Tapestry, JSF, Spring web MVC, or a custom solution.The following code shows a typical example of such a web application context. In a typical Spring web app, an applicationContext.xml file will reside in the WEB-INF directory, containing bean defini-tions according to the “spring-beans” DTD. In such a bean definition XML file, business objects and resources are defined, for example, a “myDataSource” bean, a “myInventoryManager” bean, and a “myProductManager” bean. Spring takes care of their configuration, their wiring up, and their lifecycle.<beans><bean id=”myDataSource” class=”org.springframework.jdbc. datasource.DriverManagerDataSource”><property name=”driverClassName”> <value>com.mysql.jdbc.Driver</value></property> <property name=”url”><value>jdbc:mysql:myds</value></property></bean><bean id=”myInventoryManager” class=”ebusiness.DefaultInventoryManager”> <property name=”dataSource”><ref bean=”myDataSource”/> </property></bean><bean id=”myProductManager” class=”ebusiness.DefaultProductManage r”><property name=”inventoryManager”><ref bean=”myInventoryManager”/> </property><property name=”retrieveCurrentStock”> <value>true</value></property></bean></beans>By default, all such beans have “singleton” scope: one instance per context. The “myInventoryManager” bean will automatically be wired up with the defined DataSource, while “myProductManager” will in turn receive a reference to the “myInventoryManager” bean. Those objects (traditionally called “beans” in Spring terminology) need to expos e only the corresponding bean properties or constructor arguments (as you’ll see later in this chapter); they do not have to perform any custom lookups.A root web application context will be loaded by a ContextLoaderListener that is defined in web.xml as follows:<web-app><listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class></listener>...</web-app>After initialization of the web app, the root web application context will be available as a ServletContext attribute to the whole web application, in the usual manner. It can be retrieved from there easily via fetching the corresponding attribute, or via a convenience method in org.springframework.web. context.support.WebApplicationContextUtils. This means that the application context will be available in any web resource with access to the ServletContext, like a Servlet, Filter, JSP, or Struts Action, as follows:WebApplicationContext wac = WebApplicationContextUtils.getWebApplicationContext(servletContext);The Spring web MVC framework allows web controllers to be defined as JavaBeans in child application contexts, one per dispatcher servlet. Such controllers can express dependencies on beans in the root application context via simple bean references. Therefore, typical Spring web MVC applications never need to perform a manual lookup of an application context or bean factory, or do any other form of lookup.Neither do other client objects that are managed by an application context themselves: They can receive collaborating objects as bean references.The Core Bean FactoryIn the previous section, we have seen a typical usage of the Spring IoC container in a web environment: The provided convenience classes allow for seamless integration without having to worry about low-level container details. Nevertheless, it does help to look at the inner workings to understand how Spring manages the container. Therefore, we will now look at the Spring bean container in more detail, starting at the lowest building block: the bean factory. Later, we’ll continue with resource setup and details on the application context concept.One of the main incentives for a lightweight container is to dispense with the multitude of custom facto-ries and singletons often found in J2EE applications. The Spring bean factory provides one consistent way to set up any number of application objects, whether coarse-grained components or fine-grained busi-ness objects. Applying reflection and Dependency Injection, the bean factory can host components that do not need to be aware of Spring at all. Hence we call Spring a non-invasive application framework.Fundamental InterfacesThe fundamental lightweight container interface is org.springframework.beans.factory.Bean Factory. This is a simple interface, which is easy to implement directly in the unlikely case that none of the implementations provided with Spring suffices. The BeanFactory interface offers two getBean() methods for looking up bean instances by String name, with the option to check for a required type (and throw an exception if there is a type mismatch).public interface BeanFactory {Object getBean(String name) throws BeansException;Object getBean(String name, Class requiredType) throws BeansException;boolean containsBean(String name);boolean isSingleton(String name) throws NoSuchBeanDefinitionException;String[] getAliases(String name) throws NoSuchBeanDefinitionException;}The isSingleton() method allows calling code to check whether the specified name represents a sin-gleton or prototype bean definition. In the case of a singleton bean, all calls to the getBean() method will return the same object instance. In the case of a prototype bean, each call to getBean() returns an inde-pendent object instance, configured identically.The getAliases() method will return alias names defined for the given bean name, if any. This mecha-nism is used to provide more descriptive alternative names for beans than are permitted in certain bean factory storage representations, such as XML id attributes.The methods in most BeanFactory implementations are aware of a hierarchy that the implementation may be part of. If a bean is not foundin the current factory, the parent factory will be asked, up until the root factory. From the point of view of a caller, all factories in such a hierarchy will appear to be merged into one. Bean definitions in ancestor contexts are visible to descendant contexts, but not the reverse.All exceptions thrown by the BeanFactory interface and sub-interfaces extend org.springframework. beans.BeansException, and are unchecked. This reflects the fact that low-level configuration prob-lems are not usually recoverable: Hence, application developers can choose to write code to recover from such failures if they wish to, but should not be forced to write code in the majority of cases where config-uration failure is fatal.Most implementations of the BeanFactory interface do not merely provide a registry of objects by name; they provide rich support for configuring those objects using IoC. For example, they manage dependen-cies between managed objects, as well as simple properties. In the next section, we’ll look at how such configuration can be expressed in a simple and intuitive XML structure.The sub-interface org.springframework.beans.factory.ListableBeanFactory supports listing beans in a factory. It provides methods to retrieve the number of beans defined, the names of all beans, and the names of beans that are instances of a given type:public interface ListableBeanFactory extends BeanFactory {int getBeanDefinitionCount();String[] getBeanDefinitionNames();String[] getBeanDefinitionNames(Class type);boolean containsBeanDefinition(String name);Map getBeansOfType(Class type, boolean includePrototypes,boolean includeFactoryBeans) throws BeansException}The ability to obtain such information about the objects managed by a ListableBeanFactory can be used to implement objects that work with a set of other objects known only at runtime.In contrast to the BeanFactory interface, the methods in ListableBeanFactory apply to the current factory instance and do not take account of a hierarchy that the factory may be part of. The org.spring framework.beans.factory.BeanFactoryUtils class provides analogous methods that traverse an entire factory hierarchy.There are various ways to leverage a Spring bean factory, ranging from simple bean configuration to J2EE resource integration and AOP proxy generation. The bean factory is the central, consistent way of setting up any kind of application objects in Spring, whether DAOs, business objects, or web controllers. Note that application objects seldom need to work with the BeanFactory interface directly, but are usu-ally configured and wired by a factory without the need for any Spring-specific code.For standalone usage, the Spring distribution provides a tiny spring-core.jar file that can be embed-ded in any kind of application. Its only third-party dependency beyond J2SE 1.3 (plus JAXP for XML parsing) is the Jakarta Commons Logging API.The bean factory is the core of Spring and the foundation for many other services that the framework offers. Nevertheless, the bean factory can easily be used stan-dalone if no other Spring services are required.Derivative：networkSpring 框架简介Spring框架：这是一个流行的开源应用框架，它可以解决很多问题。
毕业论文外文翻译范例
外文原文(一)Savigny and his Anglo-American Disciple s*M. H. HoeflichFriedrich Carl von Savigny, nobleman, law reformer, champion of the revived German professoriate, and founder of the Historical School of jurisprudence, not only helped to revolutionize the study of law and legal institutions in Germany and in other civil law countries, but also exercised a profound influence on many of the most creative jurists and legal scholars in England and the United States. Nevertheless, tracing the influence of an individual is always a difficult task. It is especially difficult as regards Savigny and the approach to law and legal sources propounded by the Historical School. This difficulty arises, in part, because Savigny was not alone in adopting this approach. Hugo, for instance, espoused quite similar ideas in Germany; George Long echoed many of these concepts in England during the 1850s, and, of course, Sir Henry Sumner Maine also espoused many of these same concepts central to historical jurisprudence in England in the 1860s and 1870s. Thus, when one looks at the doctrinal writings of British and American jurists and legal scholars in the period before 1875, it is often impossible to say with any certainty that a particular idea which sounds very much the sort of thing that might, indeed, have been derived from Savigny's works, was, in fact, so derived. It is possible, nevertheless, to trace much of the influence of Savigny and his legal writings in the United States and in Great Britain during this period with some certainty because so great was his fame and so great was the respect accorded to his published work that explicit references to him and to his work abound in the doctrinal writing of this period, as well as in actual law cases in the courts. Thus, Max Gutzwiller, in his classic study Der einfluss Savignys auf die Entwicklung des International privatrechts, was able to show how Savigny's ideas on conflict of laws influenced such English and American scholars as Story, Phillimore, Burge, and Dicey. Similarly, Andreas Schwarz, in his "Einflusse Deutscher Zivilistik im Auslande," briefly sketched Savigny's influence upon John Austin, Frederick Pollock, and James Bryce. In this article I wish to examine Savigny's influence over a broader spectrum and to draw a picture of his general fame and reputation both in Britain and in the United States as the leading Romanist, legal historian, and German legal academic of his day. The picture of this Anglo-American respect accorded to Savigny and the historical school of jurisprudence which emerges from these sources is fascinating. It sheds light not only upon Savigny’s trans-channel, trans-Atlantic fame, but also upon the extraordinarily*M.H.Hoeflich, Savigny and his Anglo-American Disciples, American Journal of Comparative Law, vol.37, No.1, 1989.cosmopolitan outlook of many of the leading American and English jurists of the time. Of course, when one sets out to trace the influence of a particular individual and his work, it is necessary to demonstrate, if possible, precisely how knowledge of the man and his work was transmitted. In the case of Savigny and his work on Roman law and ideas of historical jurisprudence, there were three principal modes of transmission. First, there was the direct influence he exercised through his contacts with American lawyers and scholars. Second, there was the influence he exercised through his books. Third, there was the influence he exerted indirectly through intermediate scholars and their works. Let us examine each mode separately.I.INFLUENCE OF THE TRANSLATED WORKSWhile American and British interest in German legal scholarship was high in the antebellum period, the number of American and English jurists who could read German fluently was relatively low. Even those who borrowed from the Germans, for instance, Joseph Story, most often had to depend upon translations. It is thus quite important that Savigny’s works were amongst the most frequently translated into English, both in the United States and in Great Britain. His most influential early work, the Vom Beruf unserer Zeitfur Rechtsgeschichte und Gestzgebung, was translated into English by Abraham Hayward and published in London in 1831. Two years earlier the first volume of his History of Roman Law in the Middle Ages was translated by Cathcart and published in Edinburgh. In 1830, as well, a French translation was published at Paris. Sir Erskine Perry's translation of Savigny's Treatise on Possession was published in London in 1848. This was followed by Archibald Brown's epitome of the treatise on possession in 1872 and Rattigan's translation of the second volume of the System as Jural Relations or the Law of Persons in 1884. Guthrie published a translation of the seventh volume of the System as Private International Law at Edinburgh in 1869. Indeed, two English translations were even published in the far flung corners of the British Raj. A translation of the first volume of the System was published by William Holloway at Madras in 1867 and the volume on possession was translated by Kelleher and published at Calcutta in 1888. Thus, the determined English-speaking scholar had ample access to Savigny's works throughout the nineteenth century.Equally important for the dissemination of Savigny's ideas were those books and articles published in English that explained and analyzed his works. A number of these must have played an important role in this process. One of the earliest of these is John Reddie's Historical Notices of the Roman law and of the Progress of its Study in Germany, published at Edinburgh in 1826. Reddie was a noted Scots jurist and held the Gottingen J.U.D. The book, significantly, is dedicated to Gustav Hugo. It is of that genre known as an external history of Roman law-not so much a history of substantive Roman legal doctrine but rather a historyof Roman legal institutions and of the study of Roman law from antiquity through the nineteenth century. It is very much a polemic for the study of Roman law and for the Historical School. It imparts to the reader the excitement of Savigny and his followers about the study of law historically and it is clear that no reader of the work could possibly be left unmoved. It is, in short, the first work of public relations in English on behalf of Savigny and his ideas.Having mentioned Reddie's promotion of Savigny and the Historical School, it is important to understand the level of excitement with which things Roman and especially Roman law were greeted during this period. Many of the finest American jurists were attracted-to use Peter Stein's term-to Roman and Civil law, but attracted in a way that, at times, seems to have been more enthusiastic than intellectual. Similarly, Roman and Civil law excited much interest in Great Britain, as illustrated by the distinctly Roman influence to be found in the work of John Austin. The attraction of Roman and Civil law can be illustrated and best understood, perhaps, in the context of the publicity and excitement in the English-speaking world surrounding the discovery of the only complete manuscript of the classical Roman jurist Gaius' Institutes in Italy in 1816 by the ancient historian and German consul at Rome, B.G. Niebuhr. Niebuhr, the greatest ancient historian of his time, turned to Savigny for help with the Gaius manuscript (indeed, it was Savigny who recognized the manuscript for what it was) and, almost immediately, the books and journals-not just law journals by any means-were filled with accounts of the discovery, its importance to legal historical studies, and, of course, what it said. For instance, the second volume of the American Jurist contains a long article on the civil law by the scholarly Boston lawyer and classicist, John Pickering. The first quarter of the article is a gushing account of the discovery and first publication of the Gaius manuscript and a paean to Niebuhr and Savigny for their role in this. Similarly, in an article published in the London Law Magazine in 1829 on the civil law, the author contemptuously refers to a certain professor who continued to tell his students that the text of Gaius' Institutes was lost for all time. What could better show his ignorance of all things legal and literary than to be unaware of Niebuhr's great discovery?Another example of this reaction to the discovery of the Gaius palimpsest is to be found in David Irving's Introduction to the Study of the Civil Law. This volume is also more a history of Roman legal scholarship and sources than a study of substantive Roman law. Its pages are filled with references to Savigny's Geschichte and its approach clearly reflects the influence of the Historical School. Indeed, Irving speaks of Savigny's work as "one of the most remarkable productions of the age." He must have been truly impressed with German scholarship and must also have been able to convince the Faculty of Advocates, forwhom he was librarian, of the worth of German scholarship, for in 1820 the Faculty sent him to Gottingen so that he might study their law libraries. Irving devotes several pages of his elementary textbook on Roman law to the praise of the "remarkable" discovery of the Gaius palimpsest. He traces the discovery of the text by Niebuhr and Savigny in language that would have befitted an adventure tale. He elaborates on the various labors required to produce a new edition of the text and was particularly impressed by the use of a then new chemical process to make the under text of the palimpsest visible. He speaks of the reception of the new text as being greeted with "ardor and exultation" strong words for those who spend their lives amidst the "musty tomes" of the Roman law.This excitement over the Verona Gaius is really rather strange. Much of the substance of the Gaius text was already known to legal historians and civil lawyers from its incorporation into Justinian's Institutes and so, from a substantive legal perspective, the find was not crucial. The Gaius did provide new information on Roman procedural rules and it did also provide additional information for those scholars attempting to reconstruct pre-Justinianic Roman law. Nevertheless, these contributions alone seem hardly able to justify the excitement the discovery caused. Instead, I think that the Verona Gaius discovery simply hit a chord in the literary and legal community much the same as did the discovery of the Rosetta Stone or of Schliemann’s Troy. Here was a monument of a great civilization brought newly to light and able to be read for the first time in millenia. And just as the Rosetta Stone helped to establish the modern discipline of Egyptology and Schliemann's discoveries assured the development of classical archaeology as a modern academic discipline, the discovery of the Verona Gaius added to the attraction Roman law held for scholars and for lawyers, even amongst those who were not Romanists by profession. Ancillary to this, the discovery and publication of the Gaius manuscript also added to the fame of the two principals involved in the discovery, Niebuhr and Savigny. What this meant in the English-speaking world is that even those who could not or did not wish to read Savigny's technical works knew of him as one of the discoverers of the Gaius text. This fame itself may well have helped in spreading Savigny's legal and philosophical ideas, for, I would suggest, the Gaius "connection" may well have disposed people to read other of Savigny's writings, unconnected to the Gaius, because they were already familiar with his name.Another example of an English-speaking promoter of Savigny is Luther Stearns Cushing, a noted Boston lawyer who lectured on Roman law at the Harvard Law School in 1848-49 and again in 1851- 1852.Cushing published his lectures at Boston in 1854 under the title An Introduction to the Study of Roman Law. He devoted a full chapter to a description of the historical school and to the controversy betweenSavigny and Thibaut over codification. While Cushing attempted to portray fairly the arguments of both sides, he left no doubt as to his preference for Savigny's approach:The labors of the historical school have established an entirely new and distinct era in the study of the Roman jurisprudence; and though these writers cannot be said to have thrown their predecessors into the shade, it seems to be generally admitted, that almost every branch of the Roman law has received some important modification at their hands, and that a knowledge of their writings, to some extent, at least, is essentially necessary to its acquisition.译文(一)萨维尼和他的英美信徒们*M·H·豪弗里奇弗雷德里奇·卡尔·冯·萨维尼出身贵族，是一位出色的法律改革家，也是一位倡导重建德国教授协会的拥护者，还是历史法学派的创建人之一。
毕业论文的外文翻译
毕业论文的外文翻译Graduation Thesis AbstractTitle: The Impact of Social Media on Consumer BehaviorWith the rapid development of social media in recent years, it has become a dominant force in shaping consumer behavior. This study aims to explore the impact of social media on consumer behavior and the factors that influence this impact.This research utilizes a mixed-methods approach, combining both qualitative and quantitative analysis. The qualitative analysis includes a thorough review of existing literature and case studies of successful marketing campaigns on social media platforms. The quantitative analysis involves a survey of 200 participants, aiming to gather data on their social media usage and its influence on their purchasing decisions.The findings of this study reveal that social media has a significant impact on consumer behavior. Firstly, social media provides consumers with a platform to engage with brands, to seek product information and recommendations from peers. Secondly, social media influencers play a crucial role in shaping consumer preferences and purchase intentions. Thirdly, social media advertising and promotions effectively reach and engage target audiences, contributing to the decision-making process. Additionally, this study identifies several factors that influence the impact of social media on consumer behavior. Firstly, the credibility and trustworthiness of information shared on socialmedia platforms affect consumers' willingness to accept and act upon it. Secondly, the level of engagement and interaction between consumers and brands determines the effectiveness of social media marketing campaigns. Lastly, the influence of social media varies across different consumer demographics, such as age, gender, and socio-economic status.In conclusion, social media has become an indispensable tool for marketers to reach and influence consumers. By understanding the impact and factors that influence consumer behavior on social media, marketers can develop more effective marketing strategies to connect with their target audience. However, it is essential for marketers to continually adapt and evolve their strategies as social media landscape is continuously changing. By harnessing the power of social media, businesses can gain a competitive advantage in the marketplace.。
本科毕业设计(论文)外文翻译译文
本科毕业设计（论文）外文翻译译文学生姓名：院（系）：油气资源学院专业班级：物探0502指导教师：完成日期：年月日地震驱动评价与发展：以玻利维亚冲积盆地的研究为例起止页码：1099——1108出版日期：NOVEMBER 2005THE LEADING EDGE出版单位：PanYAmericanYEnergyvBuenosYAiresvYArgentinaJPYBLANGYvYBPYExplorationvYHoustonvYUSAJ.C.YCORDOVAandYE.YMARTINEZvYChacoYS.A.vYSantaYCruzvYBolivia 通过整合多种地球物理地质技术，在玻利维亚冲积盆地，我们可以减少许多与白垩纪储集层勘探有关的地质技术风险。
通过对这些远景区进行成功钻探我们可以验证我们的解释。
这些方法包括盆地模拟，联井及地震叠前同时反演，岩石性质及地震属性解释，A VO/A V A,水平地震同相轴，光谱分解。
联合解释能够得到构造和沉积模式的微笑校正。
迄今为止，在新区有七口井已经进行了成功钻探。
基质和区域地质。
Tarija/Chaco盆地的subandean 褶皱和冲断带山麓的中部和南部，部分扩展到玻利维亚的Boomerange地区经历了集中的成功的开采。
许多深大的泥盆纪气田已经被发现，目前正在生产。
另外在山麓发现的规模较小较浅的天然气和凝析气田和大的油田进行价格竞争，如果他们能产出较快的油流而且成本低。
最近发现气田就是这种情况。
接下来，我们赋予Aguja的虚假名字就是为了讲述这些油田的成功例子。
图1 Aguja油田位于玻利维亚中部Chaco盆地的西北角。
基底构造图显示了Isarzama背斜的相对位置。
地层柱状图显示了主要的储集层和源岩。
该油田在Trija和冲积盆地附近的益背斜基底上，该背斜将油田和Ben i盆地分开（图1），圈闭类型是上盘背斜，它存在于连续冲断层上，Aguja有两个主要结构：Aguja中部和Aguja Norte,通过重要的转换压缩断层将较早开发的“Sur”油田分开Yantata Centro结构是一个三路闭合对低角度逆冲断层并伴随有小的摆幅。
本科毕业论文外文文献翻译
本科毕业论文外文文献翻译本科毕业论文外文文献翻译随着全球化的加速发展，外文文献在本科毕业论文中的重要性日益凸显。
外文文献翻译作为一种重要的研究方法，对于本科论文的撰写和论证具有重要的意义。
本文将探讨本科毕业论文外文文献翻译的意义、方法和技巧。
一、外文文献翻译的意义1. 拓宽研究视野：外文文献翻译可以让本科生接触到更广泛的学术研究成果，了解国际前沿的研究动态，拓宽研究视野，提高自身的学术素养。
2. 提高论文的质量：外文文献翻译可以为本科毕业论文提供更多的理论支持和实证研究，从而提高论文的质量和可信度。
3. 培养语言能力：外文文献翻译可以提高本科生的英语水平，培养语言能力，提高阅读和写作的能力。
二、外文文献翻译的方法1. 熟悉论文主题：在进行外文文献翻译之前，应该对本科毕业论文的主题进行深入了解，明确所需翻译的内容和重点。
2. 选择合适的文献：根据本科毕业论文的研究目标和需求，选择与主题相关、权威可信的外文文献进行翻译。
3. 精读和理解原文：在进行翻译之前，应该对原文进行仔细阅读和理解，确保对原文的意思有准确的理解。
4. 翻译和校对：根据理解的原文意思，进行翻译，并在翻译完成后进行校对，确保翻译的准确性和流畅性。
5. 结合上下文：在翻译过程中，应该结合上下文的语境，确保翻译的准确性和通顺性。
三、外文文献翻译的技巧1. 学会使用翻译工具：在进行外文文献翻译时，可以借助一些翻译工具，如谷歌翻译、有道翻译等，辅助翻译和理解。
2. 注重词汇的准确性：在翻译过程中，应该注重词汇的准确性，尽量选择与原文意思相符的词汇进行翻译。
3. 简化句子结构：在翻译过程中，可以适当简化句子结构，使翻译更加通顺和易懂。
4. 注意语法和语态：在进行外文文献翻译时，应该注意语法和语态的正确使用，避免语法错误和语态混乱。
5. 保持原文风格：在进行外文文献翻译时，应该尽量保持原文的风格和特点，使翻译更加贴近原文。
四、外文文献翻译的注意事项1. 避免机械翻译：在进行外文文献翻译时，应该尽量避免机械翻译，注重翻译的准确性和流畅性。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
分类号：__________ 学校代码：11059学号：0907021021毕业论文外文翻译材料学生姓名：陈仁俊学号： 0907021021专业班级：数学一班指导教师：王敏秋正文：外文资料译文附件：外文资料原文范德蒙行列式的相关应用（一）范德蒙行列式在行列式计算中的应用 范德蒙行列式的标准规范形式是：1222212111112111()nn n i j n i j n n n nx x x D x x x x x x x x ≥>≥---==-∏根据范德蒙行列式的特点，将所给行列式包括一些非范德蒙行列式利用各种方法将其化为范德蒙行列式，然后利用范德蒙行列式的结果，把它计算出来。
常见的化法有以下几种：1.所给行列式各列（或各行）都是某元素的不同次幂，但其幂次数排列与范德蒙行列式不完全相同，需利用行列式的性质（如提取公因式，调换各行（或各列）的次序，拆项等）将行列式化为范德蒙行列式。
例1 计算222111222333nn n nD n n n =解 n D 中各行元素都分别是一个数自左至右按递升顺序排列，但不是从0变到n r -。
而是由1递升至n 。
如提取各行的公因数，则方幂次数便从0变到1n -.[]21212111111222!!(21)(31)(1)(32)(2)(1)13331n n n n D n n n n n n n n n ---==-------!(1)!(2)!2!1!n n n =--例2 计算1111(1)()(1)()1111n n n n n n a a a n a a a n D a a a n ---+----=--解 本项中行列式的排列规律与范德蒙行列式的排列规律正好相反，为使1n D +中各列元素的方幂次数自上而下递升排列，将第1n +列依次与上行交换直至第1行，第n 行依次与上行交换直至第2行 第2行依次与上行交换直至第n 行，于是共经过(1)(1)(2)212n n n n n ++-+-+++=次行的交换得到1n +阶范德蒙行列式：[][](1)21111(1)211111(1)(1)()(1)()(1)(1)(2)()2(1)((1))!n n n n n n nnn n nk a a a n D a a a n a a a n a a a a a n a a a a n a n k ++---+=--=-----=--------------=∏若n D 的第i 行（列）由两个分行（列）所组成，其中任意相邻两行（列）均含相同分行（列）；且n D 中含有由n 个分行（列）组成的范德蒙行列式，那么将n D 的第i 行（列）乘以-1加到第1i +行（列），消除一些分行（列）即可化成范德蒙行列式： 例3 计算1234222211223344232323231122334411111sin 1sin 1sin 1sin sin sin sin sin sin sin sin sin sin sin sin sin sin sin sin sin D +Φ+Φ+Φ+Φ=Φ+ΦΦ+ΦΦ+ΦΦ+ΦΦ+ΦΦ+ΦΦ+ΦΦ+Φ解 将D 的第一行乘以-1加到第二行得：123422221122334423232323112233441111sin sin sin sin sin sin sin sin sin sin sin sin sin sin sin sin sin sin sin sin ΦΦΦΦΦ+ΦΦ+ΦΦ+ΦΦ+ΦΦ+ΦΦ+ΦΦ+ΦΦ+Φ再将上述行列式的第2行乘以-1加到第3行，再在新行列式中的第3行乘以-1加到第4行得：12342222141234333412341111sin sin sin sin (sin sin )sin sin sin sin sin sin sin sin i j j i D ≤<≤ΦΦΦΦ==Φ-ΦΦΦΦΦΦΦΦΦ∏例4 计算211122222111111111nnn n n nx x x x x x D x x x ++++++=+++（1）解 先加边，那么22111111222222222210001111111111111111111n nn nnnn n nnn nx x x x x x D x x x x x x x x x x x x ---+++=+++=+++再把第1行拆成两项之和，2211111122111121111n nn nn n n n n nx x x x x x D x x x x x x =-11111112()(1)()()[2(1)]nn k j i k j j k ni j k nnnk j i i j k ni i x x x x x x x x x x x ≤<≤=≤<≤≤<≤===----=---∏∏∏∏∏∏2.加行加列法各行（或列）元素均为某一元素的不同方幂，但都缺少同一方幂的行列式，可用此方法： 例5 计算2221233312121113nn n n nn x x x D x x x x x x =解 作1n +阶行列式：122222121333312121111nnn n nn n n nzx x x z x x x D z x x x z x x x +==1()()ni j k i l k j nx z x x =≤<≤--∏∏由所作行列式可知z 的系数为D -，而由上式可知z 的系数为：211211(1)()()nn n j k i n j k li x x x x x x -=≥>≥--∑∏通过比较系数得：1211()()nn j k i n j k li D x x x x x x =≥>≥=-∑∏3.拉普拉斯展开法运用公式D =1122n n M A M A M A ++ 来计算行列式的值： 例6 计算1111111221221110000100100010010001n n n n n n nn nnx x y y x x D y y x x y y ------=解 取第1，3， 21n -行，第1，3，21n - 列展开得：11111111222211111111n n n n n n n n n nx x y y x x y y D x x y y ------= =()()j i j i n j i lx x y y ≥>≥--∏4.乘积变换法例7 设121(0,1,22)nk k k k k ni i s x x x x k n ==+++==-∑ ，计算行列式1112122n n n n n s s s s s s D s s s ---=解11121111222111nnn iii i nnn n iiii i i nnnn n n iii i i nxxxxxD xxx-=====--====∑∑∑∑∑∑∑∑211111221222222122111122111111()n nn nn n n n n n n nj i l i j nx x x x x x x x x x x x x x x x x x x x -----≤<≤==-∏例8 计算行列式000101011101()()()()()()()()()nn n n nnnn nn nn n n n a b a b a b a b a b a b D a b a b a b ++++++=+++解 在此行列式中，每一个元素都可以利用二项式定理展开，从而变成乘积的和。
根据行列式的乘法规则，12D D D = ，其中1000111101n n nn n n n nn n n n nn n n n C C a C a C C a C a D C C a C a =01111012111n n nnn n n nb b b b b b D ---=对2D 进行例2中的行的变换，就得到范德蒙行列式，于是00121112111nnn nnnnn na a a a D D D C C C a a ==(1)2(1)n n +- 0101111n n n n n b b b b b b =(1)12200()(1)()n n n n n ni j i j j i nj i nC C Ca ab b +≤<≤≤<≤---∏∏=120()()nn n ni j i j j i nC C C a a b b ≤<≤--∏5.升阶法例9 计算行列式221111222222221111221111n nn n n n n n n n n n nnnnx x x x x x x x D x x x x x x x x --------=解 将D 升阶为下面的1n +阶行列式221111112212222212211111122122111111n n nn n n n n n nn n n n n n n n n nnnnn n nx x x x x x x x x x x x x x x x x x x x xx x x x ----+-----------=即插入一行与一列，使1n + 是关于12,,,n x x x x 的1n +阶范德蒙行列式，此处x 是变数，于是1121()()()()n n i j j i nx x x x x x x x +≤<≤=----∏ 故1n + 是一个关于x 的n 次多项式，它可以写成{}11121()(1)()n n n i j n j i nx x x x x x x -+≤<≤=-+-++++∏另一方面，将1n + 按其第1n +行展开，即得21111()(1)n n n n i j j i nx x x Dx +-+≤<≤=-+-+∏比较1n + 中关于1n x -的系数，即得121()()n i j j i nD x x x x x ≤<≤=+++-∏(二) 范德蒙行列式在多项式理论中的应用例1 设01(),n n f x c c x c x =++ 若()f x 至少有1n +个不同的根，则()0f x =。
证明 取121,,n x x x + 为()f x 的1n +个不同的根，则有齐次线形方程组2011211201222220112110,0,0,n n nn n n n n n c c x c x c x c c x c x c x c c x c x c x +++⎧++++=⎪++++=⎪⎨⎪⎪++++=⎩ (2)其中01,,n c c c 看作未知量因为方程组（2）的系数行列式D 是Vander monde 行列式，且1()0,j i i j nD x x ≤<≤=-≠∏所以方程组（2）只有零解，从而有010,n c c c ==== 即()f x 是零多项式。