本科毕业设计(论文)外文翻译译文

合集下载

本科毕业论文外文翻译【范本模板】

本科毕业论文外文翻译外文译文题目:不确定条件下生产线平衡：鲁棒优化模型和最优解解法学院：机械自动化专业：工业工程学号: 201003166045学生姓名: 宋倩指导教师：潘莉日期: 二○一四年五月Assembly line balancing under uncertainty: Robust optimization modelsand exact solution methodÖncü Hazır , Alexandre DolguiComputers ＆Industrial Engineering，2013,65：261–267不确定条件下生产线平衡：鲁棒优化模型和最优解解法安库·汉泽，亚历山大·多桂计算机与工业工程，2013，65：261–267摘要这项研究涉及在不确定条件下的生产线平衡，并提出两个鲁棒优化模型。

假设了不确定性区间运行的时间。

该方法提出了生成线设计方法,使其免受混乱的破坏。

基于分解的算法开发出来并与增强策略结合起来解决大规模优化实例.该算法的效率已被测试,实验结果也已经发表。

本文的理论贡献在于文中提出的模型和基于分解的精确算法的开发.另外，基于我们的算法设计出的基于不确定性整合的生产线的产出率会更高，因此也更具有实际意义。

此外,这是一个在装配线平衡问题上的开创性工作,并应该作为一个决策支持系统的基础。

关键字：装配线平衡；不确定性; 鲁棒优化；组合优化；精确算法1.简介装配线就是包括一系列在车间中进行连续操作的生产系统。

零部件依次向下移动直到完工。

它们通常被使用在高效地生产大量地标准件的工业行业之中。

在这方面，建模和解决生产线平衡问题也鉴于工业对于效率的追求变得日益重要。

生产线平衡处理的是分配作业到工作站来优化一些预定义的目标函数。

那些定义操作顺序的优先关系都是要被考虑的,同时也要对能力或基于成本的目标函数进行优化。

就生产（绍尔，1999）产品型号的数量来说，装配线可分为三类：单一模型（SALBP）,混合模型(MALBP）和多模式（MMALBP）。

毕业论文(设计)外文文献翻译及原文

金融体制、融资约束与投资——来自OECD的实证分析R．SemenovDepartment of Economics，University of Nijmegen，Nijmegen（荷兰内梅亨大学，经济学院）这篇论文考查了OECD的11个国家中现金流量对企业投资的影响.我们发现不同国家之间投资对企业内部可获取资金的敏感性具有显著差异,并且银企之间具有明显的紧密关系的国家的敏感性比银企之间具有公平关系的国家的低.同时，我们发现融资约束与整体金融发展指标不存在关系.我们的结论与资本市场信息和激励问题对企业投资具有重要作用这种观点一致，并且紧密的银企关系会减少这些问题从而增加企业获取外部融资的渠道。

一、引言各个国家的企业在显著不同的金融体制下运行。

金融发展水平的差别(例如，相对GDP的信用额度和相对GDP的相应股票市场的资本化程度），在所有者和管理者关系、企业和债权人的模式中，企业控制的市场活动水平可以很好地被记录.在完美资本市场,对于具有正的净现值投资机会的企业将一直获得资金。

然而，经济理论表明市场摩擦，诸如信息不对称和激励问题会使获得外部资本更加昂贵，并且具有盈利投资机会的企业不一定能够获取所需资本.这表明融资要素，例如内部产生资金数量、新债务和权益的可得性，共同决定了企业的投资决策.现今已经有大量考查外部资金可得性对投资决策的影响的实证资料（可参考，例如Fazzari（1998）、 Hoshi(1991)、 Chapman（1996）、Samuel(1998））.大多数研究结果表明金融变量例如现金流量有助于解释企业的投资水平。

这项研究结果解释表明企业投资受限于外部资金的可得性。

很多模型强调运行正常的金融中介和金融市场有助于改善信息不对称和交易成本，减缓不对称问题,从而促使储蓄资金投着长期和高回报的项目,并且提高资源的有效配置（参看Levine（1997)的评论文章）。

因而我们预期用于更加发达的金融体制的国家的企业将更容易获得外部融资.几位学者已经指出建立企业和金融中介机构可进一步缓解金融市场摩擦。

外文翻译于

西京学院本科毕业设计(论文)外文资料翻译教学单位：机电工程系专业：机械设计制造及其自动化学号： 0700010143姓名：于江成外文出处： Embedded Microcomputer Systems:Real Time Interfacing2011年3月译文一：单片机系统广义地说，微处理系统是用于处理信息的，这种信息可以是电话交谈，仪器读数或企业帐户，但是各种情况下都涉及相同的主要操作：信息处理、存储和传递。

在常规的电子设计中，这些操作都是以功能平台方式组合起来的，例如计数器，无论是电子还是机械的，都要存储当前值，并按要求将该值增1。

诸如采用计数器的电子钟之类的任一系统要使其存储和处理能力遍布整个系统，因为每个计数器都能存储和处理一些数字。

当前微处理化系统与上述的常规方法不同，它将处理，存储和传输三个功能分离形成不同的系统单元。

这种形成三个主要单元的分离方法是冯-诺依曼在20世纪40年代所设想出来的，并且是针对微计算机的设想。

从此几乎所有制成的计算机都是用这种结构设计的，尽管包含宽广的物理形式，从根本上来说他们均是具有相同的基本设计。

在微处理器系统中，处理是由微处理器本身完成的。

存储是利用存储器电路，而进入和出自系统的信息传输则是利用特定的输入/输出（I/O）电路。

要在一个微处理器化时钟中找出执行计数功能的一个特殊硬件是不可能的，因为时间存储在存储器中，而在固定的时间间隔下由微处理器控制增值。

但是，规定系统运转过程的软件包含实现计数器功能的单元。

由于系统几乎完全由软件所定义，所以对微处理器结构和其辅助电路这种看起来非常抽象的处理方法使其在应用时非常灵活。

这种设计过程主要是软件工程，而且在生产软件时，就会遇到产生于常规工程中相似的构造和维护问题。

图1.1 微型计算机的三个组成部分图1.1显示出了微型计算机中这三个单元是如何按照机器中的信息通信方式而联接起来的。

该系统由微处理器控制，它管理自己与存储器和输入/输出单元的信息传输。

毕业设计(论文)外文翻译(原文)

编号：毕业设计(论文)外文翻译（原文）院（系）：桂林电子科技大学职业技术学院专业：工商企业管理学生姓名：方智立学号：010*********指导教师单位：桂林电子科技大学职业技术学院姓名：朱芸芸职称：讲师2016年 4 月 1 日Marketing Strategy Analysis of SportsAbstractSports market is a special industry market, which for provide exchange of sports tangible products and services market. Sports market including fixed type, such as sports facilities, sports goods market, Mobile market, such as all kinds of sports service provided by the fitness club. Sports tourism and advertising business, sports goods should be consumers to accept, and occupy a larger market. If success of the sports marketing involves many factors. According to the specific characteristics of sports marketing, develop and implement appropriate marketing strategy is very important. Sports marketing strategy is to the sports business units within a certain period or stage marketing campaign's overall development plan of decision making.This paper argues that the marketing strategy can be further subdivided into market positioning strategy, market timing strategy, market entry strategy, market development strategy, market competition strategy, Choose a strategy, must conform to the enterprise's own competitive position, product status, to grasp the market opportunity, determined according to the demands of consumers. In this paper, the sports market segmentation marketing strategy for the market positioning strategy, market timing strategy, market entry strategy, market development strategy, market competition strategy, and discusses the sports marketing how to carry out strategic choice.Keywords: Sports bazaar ; Sports marketing; Marketing strategy1.Sports marketing strategy and characteristics1.1Sports marketing strategyStrategy refers to the planning of overall and profound things. Sports marketing strategy refers to the commodity business units under the guidance of modern marketing concept, to achieve its economic goal for enterprise in a certain period of the overall design and planning of marketing development.Inan increasingly competitive market circumstances, sports business units in order to effectively carry out business activities, to achieve its business objectives, must understand and based on the characteristics of marketing concepts and strategies, and Target the demand of the market, comprehensive analysis and marketing of various environmental factors, choose effective market strategy in the background.1.2The characteristics of the sports marketing strategySports marketing strategy has sports business units within a certain period or stage marketing campaign's overall development plan of decision making. It has the characteristics of the following.(1) Overall importance.Sports marketing strategy is a matter of the global business units, including two aspects the meaning of this global:on the one hand, Sports marketing strategy is the overall design, the development of the business units, including overall planning and the overall strategy and means.On the other hand, Sports marketing strategy decision is a matter of global business units and their all-round development in the future.(2)Secular.Sports marketing strategy is really about the future of sports business units: to achieve the goals of sports marketing strategy, will make the sports business units to produce qualitative leap, but this is not usually that can be done in the short term.Important, sports business units of marketing strategy on the strategic period not only very important to enterprise's survival and development, but also to the long-term development of enterprises play an important role.(3) Systematicness.Sports systemic marketing refers to business units, each part of the work of each link is a contact each other, are closely related to the organic unity of the whole.System have layers, the size and the primary and secondary division, at the next lower level to obey and serve at the next higher level.For a certain sports and business operation entity, the strategy of the whole enterprise as a whole system engineering to overall arrangement, the pursuit of the overall development of the biggest benefits.(4)Adaptability.Sports marketing adaptability, refers to the sports marketing and business operation entity is easily affected by external and internal environment, when the environment changes, sports business units made to adapt themselves to the new environment of the characteristics of rapid response.Sports marketing of the external environment including the market demand, political or economic situation changes, policy and law changes. Similarly, sports business entities internal conditions change will impact on marketing.(5)Risk.Due to sports marketing strategy is the business unit for the marketing activities during the period development collection of expected decision, and this decision is absolutely impossible in various conditions fully mature and information fully, make and sports market, especially the intangible product variety and complexity of the market, make sports marketing strategy has the characteristics of uncertainty and instantaneity, many market opportunities tend to be a passes, no longer to, opportunity and risk coexist.2.Sports marketing strategy comprisedand choiceSports marketing strategies mainly include market positioning strategy, market timing strategy, market entry strategy, market development strategy, market competition strategy.2.1 Market orientation strategyMarket positioning refers to the sports business units according to the condition of market competition situation and its own resources, establish and develop differentiated competitive advantage, to make their own products in the consumer formed in the difference between each product unique image and is superior to the competition.This unique image can be tangible or intangible.Enterprise after analyzing the market environment, should highlight its own market advantage, establish market position, Which companies need to know on a certain level of paper generalizes, consumers mind what is the best sports products as expected.2.2 Market entry policyMarket entry strategy is the sports business units at the right time to capture the target market, how to appropriately in the two aspects of production capacity and sales ability to make reliable measures and guarantee, to ensure the decision-making of sports products successfully enter the market.Its content mainly includes the production capacity of decision-making and sales ability to form two aspects.(1) Capacity Decision. In the necessary time, sports business entities formtargetmarket capacity, is one of the important conditions to achieve market goal.Regardless of whether they are sports tangible products and intangible products, generally there are two alternative strategies.①Independent development strategy refers to both tangible products, the development of sports and development of sports intangible products. All on its own strength to expand production scale, enhance the comprehensive production capacity or adjust the structure of the comprehensive production capacity of enterprise, to adapt the demand of product combination structure. ②Comprehensive development strategy, mainly depend on the sports business units of the external forces, namely, through joint, collaboration, subcontract, form a new comprehensive production capacity. Due to participating in planning, control, coordination, etc, are more difficult. Therefore, sports business units must be good at optimizing collaborator, deal with the various cooperation of responsibility, right and benefit, to maintain good relations of cooperation.(2) Sales ability decision. A sports product to enter and occupy the market, production enterprise must have the necessary sales ability and the ability to penetrate the market.Sales ability decision-making main consideration circulation channels and sales, product should be considered when making decisions, market, enterprise, social environment and the factors such as economic effect.2.3 Market development strategyMarket development strategy refers to the perspective of market prospects, the choice of market development means, usually includes two kinds of intensive development and diversified development main form.(1)Intensive development.When some kind of sports products in the market has the potential of further development, the choice of market penetration, product development and market development of three kinds of intensive development form. As the tangible products market, in sports and intangible products are common market and applicable.①Market penetration. on the basis of the existing market scale, increase the sales of existing products. Can use a variety of measures, consolidate old customers, increase the new user. ②Product development Is through developing and improving existing products, make its have some new properties and USES, meet the social demand more. ③market development. Refers to an enterprise that open up new product sales market, in order to increase sales.(2) Diversified development.Diversity is also called the diversification, basically have concentricity scattered scattered, horizontal dispersion and the integrityof three. ①Concentricity is sports business unit USES the original dispersed development technology and the characteristics, with its as the core, the development use different structure similar products. ②Scattered level of sexual development.Was used in the original market advantage, has occupied the market development of technology, nature and purpose of different products. For example, Sports club olicy makers, can through the player transfer channels, to sell players, profit.Others use their sports club or the player's social awareness to participate in the sales promotion of goods, in order to obtain profits. ③Integrity of dispersed development. Refers to the sports business units to expand the business into its original business, technology, market and the product has no connection in the industry. Such as the sports department construction and run a catering and service hotels, hotels, entertainment city, charge for parking lot, etc., is the form of scattered holistic development. Implement the diversification development, can improve the ability of sports business units to adapt to the environment, reduce the risk of a single business, at the same time, may be more fully use of all kinds of resources within the enterprise, make its have more potential development opportunities. However, the development of decentralized often leads to complication of operation and management, and business operation entities such as diversifying some problems.2.4Strategic Marketing CompetitionThe rules of the development of the market is superior bad discard, its characteristic is the petition can promote the economic development of the enterprise and the improvement of economic benefits.Enterprises should establish a clear concept of competition, flexible use of price and non-price competition means, take a man without I have, people have my good, good people knew, new I cheap, cheap I turn the principle and method of making enterprise competitive strategy, must accomplish know fairly well the competition environment and competition situation, can with ease.Enterprise competition environment factors mainly refers to the enterprise in addition to the social and cultural environment stress factors of various aspects, such as management scientist professor Michael porter of Harvard University famous the competitive offer slightly above, an enterprise usually exist competition pressure from five aspects, namely the industry competition pressure, potential to join the pressure from the industry, suppliers forward pressure (by providing raw materials or semi-finished products, to develop into their production products), buyers.(1) The overall competitive strategy. Under different conditions, the enterprise facing the pressure of competition is different, the analysis of the pressure of competition is to understand the purpose of each kind of competition situation of power, so as to make effective competition strategy.Under normal circumstances, the sports business units of competition strategy in general have a low cost strategy, product differentiation strategy and intensive strategy. ①low-cost strategy. Low cost strategy is to point to in under the premise of guarantee the quality of products and services, efforts to reduce the cost of production and sales so that the enterprise product prices lower than competitors' prices, with rapidly expanding sales increase market share. ②Product differentiation strategies. Product differentiation strategy is to point to create a unique characteristic of the enterprise products, to develop unique products or marketing programs, for in such aspects as product or service than competitors are unique. Thus to obtain the difference advantage.The United States, for example, "NIKE" brand sports shoes, NIKE production due to the appearance of novel design, the innovation of the use function and unique, and exquisite packaging, etc., although the price is surprisingly expensive, but occupies considerable market in China, the teenagers are very loving. ③Intensive strategy. Intensive strategy refers to the enterprises focus on one or several market segments provide the most effective service, better meet certain customers with different needs, so as to strive for the local competitive advantage. It is little different from the above three kinds of overall competition strategy, successfully implement these three strategies need different resources and decision-making, also should have different requirements on organization and management.(2) The competitive strategy of enterprises of different competitive position. Where the status of enterprise in market competition, the enterprise can be divided into: market leader, market challenger, market follower. Different competitive position of enterprises, should choose different market competitive strategy.①Dominant market competition strategy. Market power refers to the related products has the highest market share. Such as the current market position and stable dominated by clothing JinMeiLong, "ADIDAS", they are price changes, new product development, sales channel width and promotional efforts in a dominant position, recognized by other sports enterprises. ②The challenger market competition strategy. Market challenger refers to those in a secondary position in the market of the enterprise, such as "lining" brand garment enterprises .Market challenger to choosechallenge object is closely related to the strategic target, for a same object has different goals and strategies Such as attack market leader to gain the market share and product advantage ;Attack power with yourself quite seize its market position; Attacking small businesses taking their customers even small business itself."Lining" to win market price advantage to the international brand, with product quality advantages to gain "anta" challenger "peak" brand's market share. ③Followers of the market competition strategy. Market followers is to point to in a secondary position, under the conditions of "coexistence" market for as much as possible the benefit of the enterprise. Market followers don't need a lot of money, less risky and can obtain high profits, so many enterprises adopt this strategy, especially the sort of small or no fame and status of sports clothing enterprises. As the current sports "philharmonic" brand clothing enterprise in the enterprise.Reference[1] LiJianJun,WangCuiHua:The Research on Marketing Environment Enterprise of Things for Sports Use in China[J] Journal of NanJing institute of sport (social science edition) 2013.(10),36 ~ 48.[2] Discuss Sports market, products and marketing characteristics. [J] journal of xi ' an institute of physical education,2012.(3)101 ~109.[3] HuZhengMing Ed. Marketing Management[M].Shandong people's publishing house，2012.302 ~325.[4] [US]Kotler write. YuLiJun translate. Introduction to Marketing[M].Huaxia Publishing House,2011.333~389.[5] ZhangTongYao.Application areas to promote the marketing advantage analysis of third party logistics[J].Market of China,2010(3)128 ~136.[6] WangHuaiShu.The influence of the logistics quality of marketing[J].Teacher's Journal,2010(3)31 ~38.[7] WangChenWen.Shallow theory of logistics strategy in the role of marketing management[J].Chemical Enterprise Management,2009(7)175 ~178.。

本科毕业设计外文翻译(中文)

本科生毕业设计（论文）外文翻译外文原文题目：Real-time interactive optical micromanipulation of a mixture of high- and low-index particles中文翻译题目：高低折射率微粒混合物的实时交互式光学微操作毕业设计（论文）题目：阵列光镊软件控制系统设计姓名：任有健学院：生命学院班级：06210501指导教师：李勤高低折射率微粒混合物的实时交互式光学微操作Peter John Rodrigo Vincent Ricardo Daria Jesper Glückstad丹麦罗斯基勒DK-4000号，Risø国家实验室光学和等离子研究系jesper.gluckstad@risoe.dkhttp://www.risoe.dk/ofd/competence/ppo.htm摘要：本文论证一种对于胶体的实时交互式光学微操作的方法，胶体中包含两种折射率的微粒，与悬浮介质（0n ）相比，分别低于（0L n n <）、高于（0H n n >）悬浮介质的折射率。

球形的高低折射率微粒在横平板上被一批捕获激光束生成的约束光势能捕获，捕获激光束的横剖面可以分为“礼帽形”和“圆环形”两种光强剖面。

这种应用方法在光学捕获的空间分布和个体几何学方面提供了广泛的可重构性。

我们以实验为基础证实了同时捕获又独立操作悬浮于水（0 1.33n =）中不同尺寸的球形碳酸钠微壳（ 1.2L n ≈）和聚苯乙烯微珠（ 1.57H n =）的独特性质。

1 引言光带有动量和角动量。

伴随于光与物质相互作用的动量转移为我们提供了在介观量级捕获和操作微粒的方法。

过去数十年中的巨大发展已经导致了在生物和物理领域常规光学捕获的各种应用以及下一代光学微操作体系的出现[1-5]。

(范例)外文翻译格式

本科毕业设计（论文）外文翻译译文学生姓名：院（系）：经济管理学院专业班级：市场营销0301班指导教师：完成日期：2007年3 月22 日日本的分销渠道——对于进入日本市场的挑战与机会Distribution Channels in JapanChallenges and Opportunities for theJapanese Market Entry作者：Hokey Min起止页码：P22-35出版日期（期刊号）：0960-0035出版单位：MCB Univercity Press外文翻译译文：介绍尽管美国对日本的出口在过去两年已有大幅度的增长，然而美国对日本仍然存在着很大的贸易赤字。

尽管没有出现下降趋势，但越来越多的美国决策者及商务经理已经开始审查日本的贸易活动。

在这些人中，有一个很普遍的想法就是日本市场没有对美国产品开放，相反，美国市场对日本的贸易是开放的。

因此，克林顿政府试图采取强硬措施来反对日本的一系列贸易活动，包括商业习惯和政府政策，还企图通过贸易制裁的威胁来反对日本产品。

然而，这样的措施也会产生适得其反的结果。

它不仅会为美国消费者带来更高的商品价格和更少的商品选择，同时也会增加日本消费者的反美情绪。

最近Ginkota和Kotabe的调查表明：单独的贸易谈判不会提高美国商品进入日本市场的能力。

而对于提高美国公司进入日本市场能力的一个行之有效的方法就是研究日本近几个世纪以来所采用的商业活动。

由于法律障碍或者是日本公司对外封锁商业渠道，日本当地的分销渠道往往对外国公司不利，而这样的商业活动被认为是进入日本市场的主要障碍。

事实上，Yamawaki美国商品成功出口到日本市场在很大程度上取决于美国解决协议合同的能力。

尽管进入日本市场意义重大，然而对西方人而言，日本的经销体系经常会被人误以为是充满神秘感的。

这种误解源于日本复杂的分销惯例特征。

而这种分销惯例沿袭古老的而又严谨的建设体系。

在尝试美国贸易在日本市场成功获利减少不必要的贸易冲突过程中，我们揭露了日本分销中获利的事实，探索出了能成功进入日本市场的战略性武器。

毕业设计外文翻译模板

本科生毕业设计（论文）外文翻译毕业设计（论文）题目：组合钻床动力滑台液压系统及电控系统设计外文题目： Drilling machine译文题目：组合钻床学生姓名：马莉莉专业：机械设计制造及其自动化0701班指导教师姓名：王洁评阅日期：正文内容小四号字，宋体，行距1.5倍行距。

The drilling machine is a machine for making holes with removal of chips and it is used to create or enlarge holes. There are many different types of drilling machine for different jobs, but they can be basically broken down into two categories.The bench drill is used for drilling holes through raw materials such as wood, plastic and metal and gets its name because it is bolted to bench for stability so that larger pieces of work can be drilled safely. The pillar drill is a larger version that stands upright on the floor. It can do exactly the same work as the bench drill, but because of its size it can be used to drill larger pieces of materials and produce bigger holes. Most modern drilling machines are digitally automated using the latest computer numerical control (CNC) technology.Because they can be programmed to produce precise results, over and over again, CNC drilling machines are particularly useful for pattern hole drilling, small hole drilling and angled holes.If you need your drilling machine to work at high volume, a multi spindle drill head will allow you to drill many holes at the same time. These are also sometimes referred to as gang drills.Twist drills are suitable for wood, metal and plastics and can be used for both hand and machine drilling, with a drill set typically including sizes from 1mm to 14mm. A type of drill machine known as the turret stores tools in the turret and positions them in the order needed for work.Drilling machines, which can also be referred to as bench mounted drills or floor standing drills are fixed style of drills that may be mounted on a stand or bolted to the floor or workbench. A drilling machine consists of a base, column, table, spindle), and drill head, usually driven by an induction motor.The head typically has a set of three which radiate from a central hub that, when turned, move the spindle and chuck vertically, parallel to the axis of the column. The table can be adjusted vertically and is generally moved by a rack and pinion. Some older models do however rely on the operator to lift and re clamp the table in position. The table may also be offset from the spindles axis and in some cases rotated to a position perpendicular to the column.The size of a drill press is typically measured in terms of swing which can be is defined as twice the throat distance, which is the distance from the centre of the spindle to the closest edge of the pillar. Speed change on these drilling machines is achieved by manually moving a belt across a stepped pulley arrangement.Some drills add a third stepped pulley to increase the speed range. Moderndrilling machines can, however, use a variable-speed motor in conjunction with the stepped-pulley system. Some machine shop drilling machines are equipped with a continuously variable transmission, giving a wide speed range, as well as the ability to change speed while the machine is running.Machine drilling has a number of advantages over a hand-held drill. Firstly, it requires much less to apply the drill to the work piece. The movement of the chuck and spindle is by a lever working on a rack and pinion, which gives the operator considerable mechanical advantage.The use of a table also allows a vice or clamp to be used to position and restrain the work. This makes the operation much more secure. In addition to this, the angle of the spindle is fixed relative to the table, allowing holes to be drilled accurately and repetitively.Most modern drilling machines are digitally automated using the latest computer numerical control (CNC) technology. Because they can be programmed to produce precise results, over and over again, CNC drilling machines are particularly useful for pattern hole drilling, small hole drilling and angled holes.Drilling machines are often used for miscellaneous workshop tasks such as sanding, honing or polishing, by mounting sanding drums, honing wheels and various other rotating accessories in the chuck. To add your products click on the traders account link above.You can click on the links below to browse for new, used or to hire a drilling machine.Drilling machines are used for drilling, boring, countersinking, reaming, and tapping. Several types are used in metalworking: vertical drilling machines, horizontal drilling machines, center-drilling machines, gang drilling machines, multiple-spindle drilling machines, and special-purpose drilling machines.Vertical drilling machines are the most widely used in metalworking. They are used to make holes in relatively small work-pieces in individual and small-lot production; they are also used in maintenance shops. The tool, such as a drill, countersink, or reamer, is fastened on a vertical spindle, and the work-piece is secured on the table of the machine. The axes of the tool and the hole to be drilled are aligned by moving the workpiece. Programmed control is also used to orient the workpiece and to automate the operation. Bench-mounted machines, usually of the single-spindle type, are used to make holes up to 12 mm in diameter, for instance, in instrument-making.Heavy and large workpieces and workpieces with holes located along a curved edge are worked on radial drilling machines. Here the axes of the tool and the hole to be drilled are aligned by moving the spindle relative to the stationary work-piece.Horizontal drilling machines are usually used to make deep holes, for instance, in axles, shafts, and gun barrels for firearms and artillery pieces.Center-drilling machines are used to drill centers in the ends of blanks. They are sometimes equipped with supports that can cut off the blank before centering, and in such cases they are called center-drilling machines. Gang drilling machines with more than one drill head are used to produce several holes at one time. Multiple-spindle drilling machines feature automation of the work process. Such machines can be assembled from several standardized, self-contained heads with electric motors and reduction gears that rotate the spindle and feed the head. There are one-, two-, and three-sidedmultiple-spindle drilling machines with vertical, horizontal, and inclined spindles for drilling and tapping. Several dozen such spindles may be mounted on a single machine. Special-purpose drilling machines, on which a limited range of operations is performed, are equipped with various automated devices.Multiple operations on workpieces are performed by various combination machines. These include one- and two-sided jig boring machines,drilling-tapping machines (usually gang drilling machines with reversible thread-cutting spindles), milling-type drilling machines and drilling-mortising machines used mainly for woodworking, and automatic drilling machines.In woodworking much use is made of single- and multiple-spindle vertical drilling machines, one- and two-sided, horizontal drilling machines (usually with multiple spindles), and machines equipped with a swivel spindle that can be positioned vertically and horizontally. In addition to drilling holes, woodworking machines may be used to make grooves, recesses, and mortises and to remove knots.英文翻译指导教师评阅意见。

毕业设计论文外文文献翻译

毕业设计(论文）外文文献翻译院系：财务与会计学院年级专业：201＊级财务管理姓名:学号：132148*＊*附件: 财务风险管理【Abstract】Although financial risk has increased significantly in recent years risk and risk management are not contemporary issues。

The result of increasingly global markets is that risk may originate with events thousands of miles away that have nothing to do with the domestic market。

Information is available instantaneously which means that change and subsequent market reactions occur very quickly。

The economic climate and markets can be affected very quickly by changes in exchange rates interest rates and commodity prices。

Counterparties can rapidly become problematic。

As a result it is important to ensure financial risks are identified and managed appropriately. Preparation is a key component of risk management。

【Key Words】Financial risk，Risk management，YieldsI. Financial risks arising1.1What Is Risk1.1.1The concept of riskRisk provides the basis for opportunity. The terms risk and exposure have subtle differences in their meaning. Risk refers to the probability of loss while exposure is the possibility of loss although they are often used interchangeably。

毕业设计(论文)外文翻译【范本模板】

华南理工大学广州学院本科生毕业设计(论文）翻译英文原文名Review of Vibration Analysis Methods for Gearbox Diagnostics and Prognostics中文译名对变速箱振动分析的诊断和预测方法综述学院汽车工程学院专业班级车辆工程七班学生姓名刘嘉先学生学号201130085184指导教师李利平填写日期2015年3月15日英文原文版出处：Proceedings of the 54th Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach，V A, May 1-4，2000，p. 623-634译文成绩：指导教师(导师组长）签名：译文：简介特征提取技术在文献中有描述;然而，大多数人似乎掩盖所需的特定的预处理功能。

一些文件没有提供足够的细节重现他们的结果，并没有一个全面的比较传统的功能过渡齿轮箱数据。

常用术语,如“残差信号”,是指在不同的文件不同的技术.试图定义了状态维修社区中的常用术语和建立所需的特定的预处理加工特性。

本文的重点是对所使用的齿轮故障检测功能。

功能分为五个不同的组基于预处理的需要。

论文的第一部分将提供预处理流程的概述和其中每个特性计算的处理方案。

在下一节中，为特征提取技术描述，将更详细地讨论每一个功能。

最后一节将简要概述的宾夕法尼亚州立大学陆军研究实验室的CBM工具箱用于齿轮故障诊断。

特征提取概述许多类型的缺陷或损伤会增加机械振动水平。

这些振动水平，然后由加速度转换为电信号进行数据测量。

原则上,关于受监视的计算机的健康的信息被包含在这个振动签名。

因此，新的或当前振动签名可以与以前的签名进行比较,以确定该元件是否正常行为或显示故障的迹象。

在实践中，这种比较是不能奏效的。

由于大的变型中,签名的直接比较是困难的。

相反,一个涉及从所述振动署名数据特征提取更多有用的技术也可以使用。

外文翻译--生产制造过程中对于环境有利的改进方法

中文3210字本科生毕业设计（论文）外文翻译外文题目：Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing译文题目：生产制造过程中对于环境有利的改进方法学生姓名：专业：工业工程0901指导教师姓名：评阅日期：Improved Methods for Production Manufacturing Processes inEnvironmentally Benign ManufacturingHow to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production.It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper methodology for determining a production process is developed.This methodology integrated process determination from three different levels new production processing, selected production processing and batch production processing.This approach is taken within a manufacturing enterprise based on prior research.The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM) and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level.a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA) is presented.The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact,which are different from the traditional methods.A manufacturing system is an input-output system in which manufacturing resources (materials and energy) are transformed into products or semi-products. Manufacturing is the backbone industry for economic growth; meanwhile, it consumes a large amount of limited resources and is the root of the current environmental pollution problems. It is reported that 70–80% of the global environmental pollution is caused by manufacturing. Production processing is one of the stages in the life cycle of a production that directly consumes resources, produces environmental pollution emissions and causes occupational health and safety problems [1,2]. Therefore, it is essential for the manufacturing industry to implement environmental benign manufacturing (EBM) and low-carbon manufacturing strategiesthat, with high technology application and economic efficiency, have less resource consumption and less environmental pollution.Since the 1970s, creating the concept has been greatly expanded. 1998 U.S. National Research Council NRC confirmed that manufacturing is still create the most basic means of social wealth, the country's economic engine is running strong pillars and to create defined as: the creation, development, support and provide products and services required by the process of the process And organizational entities. 1999 Massachusetts Institute of Technology, MIT that manufacturers include: product planning, design and development, sales and service and the achievement of these functions by the use of the technology and processes, and to enable the integration of technology and human way.As an industry, modern manufacturing has expanded to include: hardware, software or integrated hardware and software, biotechnology and agricultural production of certain products. China's industrial projects must actively participate in and help manufacturers deal with the following six major challenges:①The use of information technology enterprise organizations to enhance the market's rapid response capability. To this end, manufacturers must make full use of e-commerce and concurrent engineering and other technical means and tools.②Rapid captures, collect competitive information, and quickly put them into competitive intelligence and knowledge. Industrial projects must make full use of competitive intelligence (competitive intelligence), horizontal comparison (benchmarking) and the relations (relationship) and other advanced methods and tools.③Rapid deployment and system integration, technology and resources. Manufacture and development of the network based on Internet and intranet communication.④Eliminate or control pollution, enhance their adaptability to the environment. Executive: the smallest non-renewable resource use, minimize energy use, air and water pollution minimization, so that work and living environment of the four criteria for green guidelines.⑤The development of recombinant enterprises (Reconfigurable Enterprise). The so-called reorganization of enterprises can be in a good infrastructure (such as laws, regulations and administrative, and the orderly and efficient financial and market operation, distribution of resources and communication networks, and other social conditions) support, according to task or project requests for cooperation can quickly "Polymerization" (that is composed of dynamic alliance or virtual), once the task is completed, we can fast-track "dissolution" of a new generation of variable organization and management of enterprises.⑥Innovation and improvement in the flow of (the) way. It is based on elementary particle physics, biotechnology, nanotechnology and micro and small parts of the production and manufacture of materials and innovations in technology to improve the methods and processes.At the same time,Industrial projects should actively participate in the response to the challenge of the 10 key technology research and development, they are:① Reconfigurable Manufacturing System RMSs (Reconfigurable Manufacturing Systems). Manufacturing Practice has proved that enterprises in the three core elements of competition in the manufacturing system often meet customer demand for the development of new products to market and rapid response to market the business activities of the bottleneck. RMSs of traditional manufacturing systems planning, design, construction and operation of the innovation theory and method, which uses system component / module configuration (layout) of the variability can be updated with the realization of the manufacturing system variability. It will of the products, manufacturing systems and the installation of hardware and software design and manufacturing have a profound impact.②No loss of processing (Waste2free Processing). The future of the manufacturing process is energy consumption and minimize the consumption of resources.③New course materials (New Materials Process). It is built on the innovations of raw materials and spare parts manufacturing methods and processes on the basis of.④Manufacturing biotechnology (Biotechnology for Manufacturing). It is the useof technology to automate the processing and assembling a new generation of manufacturing technology.⑤Enterprise modeling and simulation (Enterprise Modeling and Simulation). Such technology to solve enterprise system transformation, business processes and manufacturing operations of all the modeling, simulation and systems integration and other issues effectively integrated.⑥ IT (Information Technology). It is the correct and efficient decision-making at all levels to provide key information in all directions and the rapid conversion of intelligence information and knowledge technologies.⑦Product and process design (Product and Process Design Methods). It requires innovative systems, products and processes/process design theory, methods and tools, is the next generation of computer-aided design principle,methods and tools.⑧Enhanced machines - the interface (Enhanced Machine Human Interfaces). It is machines and people to solve the problem of a new generation of human-computer interface engineering technology, focused on solving the physical interface design and enhance the learning ability of the staff problems.⑨Staff education and training (Workforce Education and Training). It requires the construction of a rapid Lenovo knowledge of education and training and development of direct communication between the different language translation machine, and different cultures, languages staff cooperation.⑩Intelligence cooperation system software (Software for Intelligent Collaboration Systems). Its purpose is to a different language and cultural background of the expert intelligence cooperation through the integration of software as one. It includes group communication protocol; an agreement creating private networks, distributed business process control methods and standards and sharing of knowledge, such as software development is the use of the interactive and dynamic model of cooperation between all the smart software and interface software form of virtual cooperation Space.A process route diagnosis and improvement method that uses EBM concepts differs from traditional enterprise diagnosis methods. EBM concepts consider theenvironmental impact, resource efficiency and resource consumption. The goal of this work is to offer a fundamental solution to a recurrent enterprise problem by establishing an evaluation model that incorporates EBM concepts. The ultimate aim is to balance the economic and social benefits.China has adopted the former Soviet Union's industrial system, people on the efficiency and standardization of awareness is relatively weak. A considerable number of enterprises exist: the lack of scientific practices, systematic, standardized, mainly to use their experience and personal desire to act; operating methods of improving the general workers from the spontaneous acts of individuals; still use a rough estimation method developed experience in the fixed time, Standard time is not fixed reunification. These conditions led to corporate data based on the practicality and accuracy of poor, can not play for top companies to provide reliable support for decision-making role.A. work on technology in hand, and restrictions on the work of the universal:With the scientific and technological progress, development and production of computer technology in industrial engineering in the field of application, it is necessary to improve the method and scale of efficiency and quality of work, but work on technology has long been dependent on the skill level of operations Has been designed by researchers working with its work on the production of knowledge and practical experience to design processes and calculated the corresponding fixed working hours. Researchers working in the design practices and the development of the process of fixed working hours required a substantial amount of information processing, thinking the decision-making, data and the complexity of calculating the word-processing work. With the development of the times, this boring repetitive work of the cumbersome way gradually exposed the many shortcomings of the design: Design a long time, the design of low efficiency; operating standards of the poor consistency; document the lack of quantitative analysis of operations, can not effectively guide the production process.B. the lack of work on software system:At present, many domestic and foreign software companies in China into thesoftware systems are mostly concentrated in the CAD, CAPP, CAM, PDM, ERP and other popular software, and software investment in research work and development are very few. The reason, of course, there are software vendors in this area of neglect, but the main reason for domestic enterprises has exposed the basic data on the attitude of indifference, lack of work on software systems understanding. Research failed to keep pace with the computerization of work, led to the development of enterprises based on data lag, and high-level production systems,For example MRP, ERP, and so on can not be accurate and timely data to support the foundation, causing the whole production system inefficient.With the development and strengthening of modern enterprises, the size of the business growing based on data increasingly huge and updated data based on speed has accelerated, the traditional manual work study has been unable to meet the needs of modern enterprises. Business-to-basic data accuracy, timeliness and standardization of the requirements of basic data and experience of traditional means of access to the conflict between has become increasingly prominent.To solve these problems and contradictions, some domestic enterprises began to explore the work on computer-aided system, in particular the labor scale computer-aided system. These systems for enterprise work on the implementation of the convenience brought about certain, but not mature, mostly in the experimental stage, only to individual enterprises often work in some areas of research, not to promote universal. Therefore, a comprehensive research and development work on a common computer-aided system (Computer Aided Work Study System referred to CAWS system) is China's current work on the key areas of innovation. CAWS system for enterprises to adopt the scientific processes, methods and the development of reliable standards of the time, labor fixed the provision of supporting decision-making; Not only work on the computerization of various applications, but also with other highly integrated production systems to the business hours of work and study methods developed to provide reliable technical support, improving the accuracy of the data based enterprises and the standardization of the collection and management, and Work on improving the efficiency and quality.Resource consumption and waste materials are the roots of environmental pollution. Thus, before the environmental characteristics of resources are analyzed deeply in process planning, in terms of EBM, the resource flow and its environmental impact in the manufacturing system have to be analyzed and described first China's enterprises, implementation of research and innovation, exploration work on the theory and information technology integration means, the development and application of computer-aided research systems (CAWS system), a research work to solve our problems and contradictions of the inevitable Road..生产制造过程中对于环境有利的改进方法如何使一个生产过程达到低碳排放、对环境的影响减小以及高生产性能的一个关键因素就是低碳生产。

外文翻译

毕业设计（论文）外文参考资料及译文译文题目：洗衣机学生姓名：宋峰学号： 0821113516 专业：电气工程及其自动化所在学院：龙蟠学院指导教师：杭阿芳职称：讲师年月日Washing machinesHousehold washing machine from invention to now has experienced more than a century, through the following stages of development:The world's first washing machine is the United States in 1874 by Bill Blackstone ( Bill. Blackstone ) successfully developed. Around 1910, a first horizontal shaft drum type electric washing machine, marking the housework automatic start. Nineteen twenties, the firs t vertical shaft stirring type washing machine to the United States of America trial-produce is successful, the washing machine, started the" vertical" and" horizontal " cent. The mid 50's, Japan's Sanyo company launched Dan Tongbo wheel type washing machine. Starts with the identification of a drum type, mixing type and the wave wheel three working modes. In 60, the Japanese launched with flings the dry barrel semi-automatic washing machine, and a large number of applications of plastic, so that the washing machine 's development into a new stage. In 70, the Japanese launched a wave wheel sets of barrels of fully automatic washing machine, began with" automatic" washing machine concept. In the late 70, the Japanese launched a microcomputer controlled full a utomatic washing machine. Completed by the mechanical and electric program control computer control transition, started the computer control era. Then, the washing machine in the developed countries have entered the period of saturation, while in Asia Pacific developing countries began to enter the period of popularization. The late 80's," fuzzy control washing machine" began to appear, to achieve the home electric appliance control method on the high automation. " White goods " concept. In 90's, with the development of inverter technology, Japan launched the first of up motor direct driven washing machine washing machine driving mode, realized the revolution.The washing machine will be of high reliability, perfect function, water saving and power saving, time saving and noise reduction of specifications varieties diversification for the direction of development.Let’s look inside one of today’s fully automatic washing machines that use swirling water to clean the clothes. There are many types of washing machines but this Figure shows you what most of them are basically made up of.。

毕业设计外文翻译

AT89C51外文翻译DescriptionThe AT89C51 is a low-power, high-performance CMOS 8-bit microcomputer with 4K bytes of Flash Programmable and Erasable Read Only Memory (PEROM). The device is manufactured using Atmel’s high density nonvolatile memory technology and is compatible with the industry standard MCS-51™ instruction-set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel A T89C51 is a powerful microcomputer which provides a highly flexible and cost effective solution to many embedded control applications.Features• Compatible with MCS-51™ Products• 4K Bytes of In-System Reprogrammable Flash Memory– Endurance: 1,000 Write/Erase Cycles• Fully Static Operation: 0 Hz to 24 MHz• Three-Level Program Memory Lock• 128 x 8-Bit Internal RAM• 32 Programmable I/O Lines• Two 16-Bit Timer/Counters• Six Interrupt Sources• Programmable Serial Channel• Low Power Idle and Power Down ModesThe AT89C51 provides the following standard features: 4K bytes of Flash,128 bytes of RAM, 32 I/O lines, two 16-bit timer/counters, a five vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator and clock circuitry. In addition, the AT89C51 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port and interrupt system to continue functioning. The Power-down Mode saves the RAM contents but freezes the oscillator disabling all other chip functions until the next hardware reset.VCCSupply voltage.GNDGround.Port 0Port 0 is an 8-bit open-drain bi-directional I/O port. As an output port, each pin can sink eight TTL inputs. When 1s are written to port 0 pins, the pins can be used as high-impedance inputs.Port 0 may also be configured to be the multiplexed low-order address/data bus during accesses to external program and data memory. In this mode P0 has internal pullups. Port 0 also receives the code bytes during Flash programming, and outputs the code bytes during program verification. External pullups are required during program verification.Port 1Port 1 is an 8-bit bi-directional I/O port with internal pullups.The Port 1 output buffers can sink/source four TTL inputs.When 1s are written to Port 1 pins they are pulled high by the internal pullups and can be used as inputs. As inputs,Port 1 p ins that are externally being pulled low will source current (IIL) because of the internal pullups.Port 1 also receives the low-order address bytes during Flash programming and verification.Port 2Port 2 is an 8-bit bi-directional I/O port with internal pullups.The Port 2 output buffers can sink/source four TTL inputs.When 1s are written to Port 2 pins they are pulled high by the internal pullups and can be used as inputs. As inputs,Port 2 pins that are externally being pulled low will source current (IIL) because of the internal pullups. Port 2 emits the high-order address byte during fetches from external program memory and during accesses to external data memory that use 16-bit addresses (MOVX @DPTR). In this application, it uses strong internal pullups when emitting 1s. During accesses to external data memory that use 8-bit addresses (MOVX @ RI), Port 2 emits the contents of the P2 Special Function Register. Port 2 also receives the high-order address bits and some control signals during Flash programming and verification.Port 3Port 3 is an 8-bit bi-directional I/O port with internal pullups. The Port 3 output buffers can sink/source four TTL inputs.When 1s are written to Port 3 pins they arepulled high by the internal pullups and can be used as inputs. As inputs,Port 3 pins that are externally being pulled low will source current (IIL) because of the pullups. Port 3 also serves the functions of various special features of the AT89C51 as listed below:Port 3 also receives some control signals for Flash programming and verification. RSTReset input. A high on this pin for two machine cycles while the oscillator is running resets the device.ALE/PROGAddress Latch Enable output pulse for latching the low byte of the address during accesses to external memory. This pin is also the program pulse input (PROG) during Flash programming. In normal operation ALE is emitted at a constant rate of 1/6 the oscillator frequency, and may be used for external timing or clocking purposes. Note, however, that one ALE pulse is skipped during each access to external Data Memory.If desired, ALE operation can be disabled by setting bit 0 of SFR location 8EH. With the bit set, ALE is active only during a MOVX or MOVC instruction. Otherwise, the pin is weakly pulled high. Setting the ALE-disable bit has no effect if the microcontroller is in external execution mode.PSENProgram Store Enable is the read strobe to external program memory. When the AT89C51 is executing code from external program memory, PSEN is activated twice each machine cycle, except that two PSEN activations are skipped during each access to external data memory.EA/VPPExternal Access Enable. EA must be strapped to GND in order to enable the device to fetch code from external program memory locations starting at 0000H up toFFFFH.Note, however, that if lock bit 1 is programmed, EA will be internally latched on reset. EA should be strapped to VCC for internal program executions.This pin also receives the 12-volt programming enable voltage (VPP) during Flash programming, for parts that require 12-volt VPP.XTAL1Input to the inverting oscillator amplifier and input to the internal clock operating circuit.XTAL2Output from the inverting oscillator amplifier.Oscillator CharacteristicsXTAL1 and XTAL2 are the input and output, respectively,of an inverting amplifier which can be configured for use as an on-chip oscillator, as shown in Figure 1. Either a quartz crystal or ceramic resonator may be used. To drive the device from an external clock source, XTAL2 should be left unconnected while XTAL1 is driven as shown in Figure 2.There are no requirements on the duty cycle of the external clock signal, since the input to the internal clocking circuitry is through a divide-by-two flip-flop, but minimum and maximum voltage high and low time specifications must be observed.Idle ModeIn idle mode, the CPU puts itself to sleep while all the on-chip peripherals remain active. The mode is invoked by software. The content of the on-chip RAM and all the special functions registers remain unchanged during this mode. The idle mode can be terminated by any enabled interrupt or by a hardware reset. It should be noted that when idle is terminated by a hard ware reset, the device normally resumes program execution, from where it left off, up to two machine cycles before the internal reset algorithm takes control. On-chip hardware inhibits access to internal RAM in this event, but access to the port pins is not inhibited. To eliminate the possibility of an unexpected write to a port pin when Idle is terminated by reset, the instruction following the one that invokes Idle should not be one that writes to a port pin or to external memory.Figure 1. Oscillator ConnectionsNote: C1, C2 = 30 pF ± 10 pF for Crystals= 40 pF ± 10 pF for Ceramic ResonatorsFigure 2. External Clock Drive ConfigurationPower-down ModeIn the power-down mode, the oscillator is stopped, and the instruction that invokes power-down is the last instruction executed. The on-chip RAM and Special Function Registers retain their values until the power-down mode is terminated. The only exit from power-down is a hardware reset. Reset redefines the SFRs but does not change the on-chip RAM. The reset should not be activated before VCC is restored to its normal operating level and must be held active long enough to allow the oscillator to restart and stabilize.Program Memory Lock BitsOn the chip are three lock bits which can be left unprogrammed (U) or can be programmed (P) to obtain the additional features listed in the table below.When lock bit 1 is programmed, the logic level at the EA pin is sampled and latched during reset.If the device is powered up without a reset, the latch initializes to a random value, and holds that value until reset is activated. It is necessary that the latched value of EA be in agreement with the current logic level at that pin in order for the device to function properly.Programming the FlashThe AT89C51 is normally shipped with the on-chip Flash memory array in the erased state (that is, contents = FFH)and ready to be programmed. The programming interface accepts either a high-voltage (12-volt) or a low-voltage (VCC) program enable signal. The low-voltage programming mode provides a convenient way to program the AT89C51 inside t he user’s system, while the high-voltage programming mode is compatible with conventional thirdparty Flash or EPROM programmers.The AT89C51 is shipped with either the high-voltage or low-voltage programming mode enabled. The respective top-side marking and device signature codes are listed in the following table.The AT89C51 code memory array is programmed byte-by-byte in either programming mode. To program any non-blank byte in the on-chip Flash Memory, the entire memory must be erased using the Chip Erase Mode. Programming Algorithm: Before programming the A T89C51, the address, data and control signals should be set up according to the Flash programming mode table and Figures 3 and 4. To program the AT89C51, take the following steps.1. Input the desired memory location on the address lines.2. Input the appropriate data byte on the data lines.3. Activate the correct combination of control signals.4. Raise EA/VPP to 12V for the high-voltage programming mode.5. Pulse ALE/PROG once to program a byte in the Flash array or the lock bits. The byte-write cycle is self-timedand typically takes no more than 1.5 ms. Repeat steps 1 through 5, changing the address and data for the entire array or until the end of the object file is reached.Data Polling: The AT89C51 features Data Polling to indicate the end of a write cycle. During a write cycle, anattempted read of the last byte written will result in the complement of the written datum on PO.7. Once the write cycle has been completed, true data are valid on all outputs, and the next cycle may begin. Data Polling may begin any time after a write cycle has been initiated.Ready/Busy: The progress of byte programming can also be monitored by the RDY/BSY output signal. P3.4 is pulled low after ALE goes high during programming to indicate BUSY. P3.4 is pulled high again when programming is done to indicate READY.Program V erify: If lock bits LB1 and LB2 have not been programmed, the programmed code data can be read back via the address and data lines for verificatio n. The lock bits cannot be verified directly. V erification of the lock bits is achieved by observing that their features are enabled.Chip Erase: The entire Flash array is erased electrically by using the proper combination of control signals and by holding ALE/PROG low for 10 ms. The code array is written with all ―1‖s. The chip erase operation must be executed before the code memory can be re-programmed.Reading the Signature Bytes: The signature bytes are read by the same procedure as a normal verification of locations 030H, 031H, and 032H, except that P3.6 and P3.7 must be pulled to a logic low. The values returned are as follows.(030H) = 1EH indicates manufactured by Atmel(031H) = 51H indicates 89C51(032H) = FFH indicates 12V programming(032H) = 05H indicates 5V programmingProgramming InterfaceEvery code byte in the Flash array can be written and the entire array can be erased by using the appropriate combination of control signals. The write operation cycle is selftimed and once initiated, will automatically time itself to completion.All major programming vendors offer worldwide support for the Atmelmicrocontroller series. Please contact your local programming vendor for the appropriate software revision.Flash Programming and V erification Waveforms - High-voltage Mode (VPP = 12V)Flash Programming and V erification Waveforms - Low-voltage Mode (VPP = 5V)Flash Programming and Verification Characteristics TA = 0°C to 70°C, VCC = 5.0 ±10%Absolute Maximum Ratings**NOTICE: Str esses beyond those listed under ―Absolute Maximum Ratings‖ may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.DC CharacteristicsTA = -40°C to 85°C, VCC = 5.0V ±20% (unless otherwise noted)Notes: 1. Under steady state (non-transient) conditions, IOL must be externally limited as follows:Maximum IOL per port pin: 10 mAMaximum IOL per 8-bit port: Port 0: 26 mAPorts 1, 2, 3: 15 mAMaximum total IOL for all output pins: 71 mAIf IOL exceeds the test condition, VOL may exceed the related specification. Pins arenot guaranteed to sink current greater than the listed test conditions.2. Minimum VCC for Power-down is 2V.AC CharacteristicsUnder operating conditions, load capacitance for Port 0, ALE/PROG, and PSEN = 100 pF; load capacitance for all other outputs = 80 pF.External Program and Data Memory CharacteristicsExternal Program Memory Read CycleExternal Data Memory Read CycleExternal Data Memory Write CycleExternal Clock Drive WaveformsExternal Clock DriveSerial Port Timing: Shift Register Mode Test Conditions (VCC = 5.0 V ±20%; Load Capacitance = 80 pF)Shift Register Mode Timing WaveformsAC Testing Input/Output Waveforms(1)Note: 1. AC Inputs during testing are driven at VCC - 0.5V for a logic 1 and 0.45V for a logic 0. Timing measurements are made at VIH min. for a logic 1 and VIL max. for a logic 0.Float Waveforms(1)Note: 1. For timing purposes, a port pin is no longer floating when a 100mV change from load voltage occurs. A port pin begins to float when 100mV change from the loaded VOH/VOL level occurs.AT89C51中文原文AT89C51是美国ATMEL公司生产的低电压，高性能CMOS8位单片机，片内含4k bytes的可反复擦写的只读程序存储器（PEROM）和128 bytes的随机存取数据存储器（RAM），器件采用A TMEL公司的高密度、非易失性存储技术生产，兼容标准MCS-51指令系统，片内置通用8位中央处理器（CPU）和Flash存储单元，功能强大AT89C51单片机可为您提供许多高性价比的应用场合，可灵活应用于各种控制领域。

外文翻译屋顶花园

扬州大学大学本科毕业设计（论文）外文参考文献译文及原文论文题目学部专业班级学号学生姓名指导教师目录城市环境下的绿色屋顶 (1)GREEN ROOFS IN THE CITY ENVIRONMENT (6)德国屋顶花园绿化 (13)Roof Garden in Germany (20)城市环境下的绿色屋顶摘要本研究旨在呈现建在这个世纪的近代历史先例的屋顶草坪和花园，展现真实提供了目前水平的防水建筑和园艺技术来改善城市环境的可能性。

在欧洲，尤其是在过去的十年中，可用数量的信息在“绿色屋顶”已经大幅增加了。

国内最早领域的尝试“绿色屋顶”是最近几年，但建筑行业还没有很好的解决这个结构和生态的方案，这被认为是有点好奇。

主要原因是这种态度、可用的国际信息（根据经验，讨论论文，研究、指导方针、手册等）没有达到那些专业人士、潜在投资者和建筑商，他们的决定是普遍接受“绿色屋顶”为前提的。

1．概念和历史屋顶花园的概念可以追溯到最早的实际上是为了人的建筑活动。

在整个历史过程中我们可以看到一个需求是在屋顶种植植被，其中最著名的是古代文明巴比伦的空中花园。

在罗马帝国时代和中世纪的绿色屋顶被统治阶级主要用于显示奢侈。

在现代，特别是在二十世纪的建筑，绿色的花园被视为一种自然现象。

一个特殊的实现可以观察到屋顶花园在北欧的本土建筑在其传统的斜屋顶上的草。

如今，时代的人口稠密的城市地区缺乏绿色草皮引起关注，因为这个原因，生态建筑的支持者在欧洲已经集中解决几十年来与技术和绿化的有关问题，恢复绿色区域。

长视为历史上罕见的特点之前，开发的技术方法论要求屋顶花园并未确立，因此几乎没有任何可能性的广泛传播。

在欧洲的经验在过去的15年创建长满草的屋顶--屋顶花园，已经导致了这种信息的宝贵来源，利用目前可用的屋面保温材料，可以设计优秀的多层次的、运转良好的绿色屋顶。

例如，绿色屋顶的解决方案涉及一个测序的层和使用合适的材料，介绍了在德国、奥地利、瑞士和可以适应的其他地方，选择植物和保健技术是依赖于气候和地理位置，因此不能直接采用。

毕业设计(论文)外文翻译

华南理工大学广州学院本科生毕业设计（论文）翻译外文原文名Agency Cost under the Restriction of Free Cash Flow中文译名自由现金流量的限制下的代理成本学院管理学院专业班级会计学3班学生姓名陈洁玉学生学号200930191100指导教师余勍讲师填写日期2015年5月11日外文原文版出处：译文成绩：指导教师（导师组长）签名：译文：自由现金流量的限制下的代理成本摘要代理成本理论是资本结构理论的一个重要分支。

自由现金流代理成本有显着的影响。

在这两个领域相结合的研究，将有助于建立和扩大理论体系。

代理成本理论基础上，本研究首先分类自由现金流以及统计方法的特点。

此外，投资自由现金流代理成本的存在证明了模型。

自由现金流代理成本理论引入限制，分析表明，它会改变代理成本，进而将影响代理成本和资本结构之间的关系，最后，都会影响到最优资本结构点，以保持平衡。

具体地说，自由现金流增加，相应地，债务比例会降低。

关键词：资本结构，现金流，代理成本，非金钱利益1、介绍代理成本理论，金融契约理论，信号模型和新的啄食顺序理论，新的资本结构理论的主要分支。

财务con-道的理论侧重于限制股东的合同行为，解决股东和债权人之间的冲突。

信令模式和新的啄食顺序理论中心解决投资者和管理者之间的冲突。

这两种类型的冲突是在商业组织中的主要冲突。

代理成本理论认为，如何达到平衡这两种类型的冲突，资本结构是如何形成的，这是比前两次在一定程度上更多的理论更全面。

……Agency Cost under the Restriction of Free Cash FlowAbstractAgency cost theory is an important branch of capital structural theory. Free cash flow has significant impact on agency cost. The combination of research on these two fields would help to build and extend the theoretical system. Based on agency cost theory, the present study firstly categorized the characteristics of free cash flow as well as the statistical methodologies. Furthermore, the existence of investing free cash flow in agency cost was proved by a model. Then free cash flow was introduced into agency cost theory as restriction, the analysis shows that it will change agency cost, in turn, will have an impact on the relationship between agency cost and capital structure, finally, will influence the optimal capital structure point to maintain the equilibrium. Concretely, with the increasing free cash flow, correspondingly, debt proportion will decrease.Keywords:Capital Structure,Free Cash Flow,Agency Cost,Non-Pecuniary Benefit1. IntroductionAgency cost theory, financial contract theory, signaling model and new pecking order theory are the main branches of new capital structure theory. Financial con-tract theory focuses on restricting stockholders’ behavior by contract and solving the conflict between stockholders and creditors. Signaling model and new pecking order theory center on solving the conflict between investors and managers. These two types of conflict are the main conflict in business organizations. Agency cost theory considers how equilibrium is reached in both types of conflict and how capital structure is formed, which is more theory is more comprehensive than the previous two to some degree.……。

毕业设计外文文献翻译【范本模板】

毕业设计（论文)外文资料翻译系别：专业：班级:姓名：学号:外文出处:附件： 1. 原文; 2。

译文2013年03月附件一：A Rapidly Deployable Manipulator SystemChristiaan J。

J。

Paredis, H. Benjamin Brown，Pradeep K. KhoslaAbstract:A rapidly deployable manipulator system combines the flexibility of reconfigurable modular hardware with modular programming tools，allowing the user to rapidly create a manipulator which is custom-tailored for a given task. This article describes two main aspects of such a system，namely，the Reconfigurable Modular Manipulator System （RMMS)hardware and the corresponding control software。

1 IntroductionRobot manipulators can be easily reprogrammed to perform different tasks, yet the range of tasks that can be performed by a manipulator is limited by mechanicalstructure。

Forexample，a manipulator well-suited for precise movement across the top of a table would probably no be capable of lifting heavy objects in the vertical direction. Therefore，to perform a given task,one needs to choose a manipulator with an appropriate mechanical structure.We propose the concept of a rapidly deployable manipulator system to address the above mentioned shortcomings of fixed configuration manipulators。

外文翻译

附件一：外文资料翻译译文流体力学混合在单螺杆挤出机Ravlndran Chella 和Julio M. Ottlno*Massachusetts 州Amherst ，Massachusetts 大学，化学工程系 01003卷矩形空腔流图5为一个序列的一个接口，已进行二维矩形腔流拉伸步骤，在长度增长的界面，L(t ）伴随着条纹厚度减少而减少，它被定义为相邻的接口之间的平均垂直距离，因此L(t)•s(t)≈常数，Biggs 和Middleman(1974b)使用一个简化的标记和细胞（MAC ）技术(Harlow 和Amsden ，1970)来追踪该接口的位置。

然而，他们只考虑水平接口以及他们认为小拉伸比率的情况。

图5对两个相邻的垂直拉伸的流体层之间的接口在二维矩形腔流的步骤顺序示意图在一个典型的数值模拟中，变形及连续线拉伸（或表面）是使用有限数量的粒子模拟。

对于幅度的一个或两个数量级的相对伸展的线变形，包含所述线路分离的单个颗粒，定义并不清晰，对每一个粒子的初始浓度（每单位长度的粒子数量）会有一段时间在这几乎不可能重建。

（如果粒子流混乱，这个问题会急剧变得严重。

）当进行线路中的示踪粒子模拟时，相同的问题会出现在实验工作中，另一方面，该线路不能过于集中，因为它不是被动接口，如果线路是可溶性示踪剂模拟，问题将会扩散。

一般来说，这似乎很难遵循传统的跟踪方法或实验的210或相对较高的拉伸比拉伸，数值误差可能会使它不可能实现可逆性预期规则运动(Khakhar 等人,1984),界面的长度变化的关系可以用有限的材料进行拉伸计算1/2(0)ˆˆ(t)(:)|L L C MM dx =⎰ (11)该组包含该接口的差分线元件的初始取向的需要被指定，对于垂直界面（垂直于移动板块）ˆM =(0,l)和水平界面（平行移动板块）ˆM = (l,0)，以及所有的行元素，由于它是在初始配置，所以用公式11计算是相对简单的。

这里使用的方法可以进行计算任意大的拉伸比，为了能够运用公式11，一种光腔流场的数学描述是有必要的，在这种情况下，参与关于瞬态问题利用稳态速度分布的误差比较小，例如稳态操作条件下迅速达到正常操作条件（Bigg 和 Middleman,1974b Erwin 和 Moktharian ，1981），由公式1可以得出这一流程最简单的说明。

本科毕业设计(论文)外文翻译译文

本科毕业设计（论文）外文翻译译文学生姓名：院（系）：油气资源学院专业班级：物探0502指导教师：完成日期：年月日地震驱动评价与发展：以玻利维亚冲积盆地的研究为例起止页码：1099——1108出版日期：NOVEMBER 2005THE LEADING EDGE出版单位：PanYAmericanYEnergyvBuenosYAiresvYArgentinaJPYBLANGYvYBPYExplorationvYHoustonvYUSAJ.C.YCORDOVAandYE.YMARTINEZvYChacoYS.A.vYSantaYCruzvYBolivia 通过整合多种地球物理地质技术，在玻利维亚冲积盆地，我们可以减少许多与白垩纪储集层勘探有关的地质技术风险。

通过对这些远景区进行成功钻探我们可以验证我们的解释。

这些方法包括盆地模拟，联井及地震叠前同时反演，岩石性质及地震属性解释，A VO/A V A,水平地震同相轴，光谱分解。

联合解释能够得到构造和沉积模式的微笑校正。

迄今为止，在新区有七口井已经进行了成功钻探。

基质和区域地质。

Tarija/Chaco盆地的subandean 褶皱和冲断带山麓的中部和南部，部分扩展到玻利维亚的Boomerange地区经历了集中的成功的开采。

许多深大的泥盆纪气田已经被发现，目前正在生产。

另外在山麓发现的规模较小较浅的天然气和凝析气田和大的油田进行价格竞争，如果他们能产出较快的油流而且成本低。

最近发现气田就是这种情况。

接下来，我们赋予Aguja的虚假名字就是为了讲述这些油田的成功例子。

图1 Aguja油田位于玻利维亚中部Chaco盆地的西北角。

基底构造图显示了Isarzama背斜的相对位置。

地层柱状图显示了主要的储集层和源岩。

该油田在Trija和冲积盆地附近的益背斜基底上，该背斜将油田和Ben i盆地分开（图1），圈闭类型是上盘背斜，它存在于连续冲断层上，Aguja有两个主要结构：Aguja中部和Aguja Norte,通过重要的转换压缩断层将较早开发的“Sur”油田分开Yantata Centro结构是一个三路闭合对低角度逆冲断层并伴随有小的摆幅。

毕业设计英文翻译(原文)

编号：毕业设计(论文)外文翻译（原文）院（系）：桂林电子科技大学专业：电子信息工程学生姓名： xx学号： xxxxxxxxxxxxx 指导教师单位：桂林电子科技大学姓名： xxxx职称： xx2014年x月xx日Timing on and off power supplyusesThe switching power supply products are widely used in industrial automation and control, military equipment, scientific equipment, LED lighting, industrial equipment,communications equipment,electrical equipment,instrumentation, medical equipment, semiconductor cooling and heating, air purifiers, electronic refrigerator, LCD monitor, LED lighting, communications equipment, audio-visual products, security, computer chassis, digital products and equipment and other fields.IntroductionWith the rapid development of power electronics technology, power electronics equipment and people's work, the relationship of life become increasingly close, and electronic equipment without reliable power, into the 1980s, computer power and the full realization of the switching power supply, the first to complete the computer Power new generation to enter the switching power supply in the 1990s have entered into a variety of electronic, electrical devices, program-controlled switchboards, communications, electronic testing equipment power control equipment, power supply, etc. have been widely used in switching power supply, but also to promote the rapid development of the switching power supply technology .Switching power supply is the use of modern power electronics technology to control the ratio of the switching transistor to turn on and off to maintain a stable output voltage power supply, switching power supply is generally controlled by pulse width modulation (PWM) ICs and switching devices (MOSFET, BJT) composition. Switching power supply and linear power compared to both the cost and growth with the increase of output power, but the two different growth rates. A power point, linear power supply costs, but higher than the switching power supply. With the development of power electronics technology and innovation, making the switching power supply technology to continue to innovate, the turning points of this cost is increasingly move to the low output power side, the switching power supply provides a broad space for development.The direction of its development is the high-frequency switching power supply, high frequency switching power supply miniaturization, and switching power supply into a wider range of application areas, especially in high-tech fields, and promote the miniaturization of high-tech products, light of. In addition, the development and application of the switching power supply in terms of energy conservation, resource conservation and environmental protection are of great significance.classificationModern switching power supply, there are two: one is the DC switching power supply; the other is the AC switching power supply. Introduces only DC switching power supply and its function is poor power quality of the original eco-power (coarse) - such as mains power or battery power, converted to meet the equipment requirements of high-quality DC voltage (Varitronix) . The core of the DC switching power supply DC / DC converter. DC switching power supply classification is dependent on the classification of DC / DC converter. In other words, the classification of the classification of the DC switching power supply and DC/DC converter is the classification of essentially the same, the DC / DC converter is basically a classification of the DC switching power supply.DC /DC converter between the input and output electrical isolation can be divided into two categories: one is isolated called isolated DC/DC converter; the other is not isolated as non-isolated DC / DC converter.Isolated DC / DC converter can also be classified by the number of active power devices. The single tube of DC / DC converter Forward (Forward), Feedback (Feedback) two. The double-barreled double-barreled DC/ DC converter Forward (Double Transistor Forward Converter), twin-tube feedback (Double Transistor Feedback Converter), Push-Pull (Push the Pull Converter) and half-bridge (Half-Bridge Converter) four. Four DC / DC converter is the full-bridge DC / DC converter (Full-Bridge Converter).Non-isolated DC / DC converter, according to the number of active power devices can be divided into single-tube, double pipe, and four three categories. Single tube to a total of six of the DC / DC converter, step-down (Buck) DC / DC converter, step-up (Boost) DC / DC converters, DC / DC converter, boost buck (Buck Boost) device of Cuk the DC / DC converter, the Zeta DC / DC converter and SEPIC, the DC / DC converter. DC / DC converters, the Buck and Boost type DC / DC converter is the basic buck-boost of Cuk, Zeta, SEPIC, type DC / DC converter is derived from a single tube in this six. The twin-tube cascaded double-barreled boost (buck-boost) DC / DC converter DC / DC converter. Four DC / DC converter is used, the full-bridge DC / DC converter (Full-Bridge Converter).Isolated DC / DC converter input and output electrical isolation is usually transformer to achieve the function of the transformer has a transformer, so conducive to the expansion of the converter output range of applications, but also easy to achieve different voltage output , or a variety of the same voltage output.Power switch voltage and current rating, the converter's output power is usually proportional to the number of switch. The more the number of switch, the greater the output power of the DC / DC converter, four type than the two output power is twice as large,single-tube output power of only four 1/4.A combination of non-isolated converters and isolated converters can be a single converter does not have their own characteristics. Energy transmission points, one-way transmission and two-way transmission of two DC / DC converter. DC / DC converter with bi-directional transmission function, either side of the transmission power from the power of lateral load power from the load-lateral side of the transmission power.DC / DC converter can be divided into self-excited and separately controlled. With the positive feedback signal converter to switch to self-sustaining periodic switching converter, called self-excited converter, such as the the Luo Yeer (Royer,) converter is a typical push-pull self-oscillating converter. Controlled DC / DC converter switching device control signal is generated by specialized external control circuit.the switching power supply.People in the field of switching power supply technology side of the development of power electronic devices, while the development of the switching inverter technology, the two promote each other to promote the switching power supply annual growth rate of more than two digits toward the light, small, thin, low-noise, high reliability, the direction of development of anti-jamming. Switching power supply can be divided into AC / DC and DC / DC two categories, AC / AC DC / AC, such as inverters, DC / DC converter is now modular design technology and production processes at home and abroad have already matured and standardization, and has been recognized by the user, but AC / DC modular, its own characteristics make the modular process, encounter more complex technology and manufacturing process. Hereinafter to illustrate the structure and characteristics of the two types of switching power supply.Self-excited: no external signal source can be self-oscillation, completely self-excited to see it as feedback oscillation circuit of a transformer.Separate excitation: entirely dependent on external sustain oscillations, excited used widely in practical applications. According to the excitation signal structure classification; can be divided into pulse-width-modulated and pulse amplitude modulated two pulse width modulated control the width of the signal is frequency, pulse amplitude modulation control signal amplitude between the same effect are the oscillation frequency to maintain within a certain range to achieve the effect of voltage stability. The winding of the transformer can generally be divided into three types, one group is involved in the oscillation of the primary winding, a group of sustained oscillations in the feedback winding, there is a group of load winding. Such as Shanghai is used in household appliances art technological production of switching power supply, 220V AC bridge rectifier, changing to about 300V DC filter added tothe collector of the switch into the transformer for high frequency oscillation, the feedback winding feedback to the base to maintain the circuit oscillating load winding induction signal, the DC voltage by the rectifier, filter, regulator to provide power to the load. Load winding to provide power at the same time, take up the ability to voltage stability, the principle is the voltage output circuit connected to a voltage sampling device to monitor the output voltage changes, and timely feedback to the oscillator circuit to adjust the oscillation frequency, so as to achieve stable voltage purposes, in order to avoid the interference of the circuit, the feedback voltage back to the oscillator circuit with optocoupler isolation.technology developmentsThe high-frequency switching power supply is the direction of its development, high-frequency switching power supply miniaturization, and switching power supply into the broader field of application, especially in high-tech fields, and promote the development and advancement of the switching power supply, an annual more than two-digit growth rate toward the light, small, thin, low noise, high reliability, the direction of the anti-jamming. Switching power supply can be divided into AC / DC and DC / DC two categories, the DC / DC converter is now modular design technology and production processes at home and abroad have already matured and standardized, and has been recognized by the user, but modular AC / DC, because of its own characteristics makes the modular process, encounter more complex technology and manufacturing process. In addition, the development and application of the switching power supply in terms of energy conservation, resource conservation and environmental protection are of great significance.The switching power supply applications in power electronic devices as diodes, IGBT and MOSFET.SCR switching power supply input rectifier circuit and soft start circuit, a small amount of applications, the GTR drive difficult, low switching frequency, gradually replace the IGBT and MOSFET.Direction of development of the switching power supply is a high-frequency, high reliability, low power, low noise, jamming and modular. Small, thin, and the key technology is the high frequency switching power supply light, so foreign major switching power supply manufacturers have committed to synchronize the development of new intelligent components, in particular, is to improve the secondary rectifier loss, and the power of iron Oxygen materials to increase scientific and technological innovation in order to improve the magnetic properties of high frequency and large magnetic flux density (Bs), and capacitor miniaturization is a key technology. SMT technology allows the switching power supply has made considerable progress, the arrangement of the components in the circuit board on bothsides, to ensure that the light of the switching power supply, a small, thin. High-frequency switching power supply is bound to the traditional PWM switching technology innovation, realization of ZVS, ZCS soft-switching technology has become the mainstream technology of the switching power supply, and a substantial increase in the efficiency of the switching power supply. Indicators for high reliability, switching power supply manufacturers in the United States by reducing the operating current, reducing the junction temperature and other measures to reduce the stress of the device, greatly improve the reliability of products.Modularity is the overall trend of switching power supply, distributed power systems can be composed of modular power supply, can be designed to N +1 redundant power system, and the parallel capacity expansion. For this shortcoming of the switching power supply running noise, separate the pursuit of high frequency noise will also increase, while the use of part of the resonant converter circuit technology to achieve high frequency, in theory, but also reduce noise, but some The practical application of the resonant converter technology, there are still technical problems, it is still a lot of work in this field, so that the technology to be practical.Power electronics technology innovation, switching power supply industry has broad prospects for development. To accelerate the pace of development of the switching power supply industry in China, it must take the road of technological innovation, out of joint production and research development path with Chinese characteristics and contribute to the rapid development of China's national economy.Developments and trends of the switching power supply1955 U.S. Royer (Roger) invented the self-oscillating push-pull transistor single-transformer DC-DC converter is the beginning of the high-frequency conversion control circuit 1957 check race Jen, Sen, invented a self-oscillating push-pull dual transformers, 1964, U.S. scientists canceled frequency transformer in series the idea of switching power supply, the power supply to the size and weight of the decline in a fundamental way. 1969 increased due to the pressure of the high-power silicon transistor, diode reverse recovery time shortened and other components to improve, and finally made a 25-kHz switching power supply.At present, the switching power supply to the small, lightweight and high efficiency characteristics are widely used in a variety of computer-oriented terminal equipment, communications equipment, etc. Almost all electronic equipment is indispensable for a rapid development of today's electronic information industry power mode. Bipolar transistor made of 100kHz, 500kHz power MOS-FET made, though already the practical switching power supply is currently available on the market, but its frequency to be further improved. Toimprove the switching frequency, it is necessary to reduce the switching losses, and to reduce the switching losses, the need for high-speed switch components. However, the switching speed will be affected by the distribution of the charge stored in the inductance and capacitance, or diode circuit to produce a surge or noise. This will not only affect the surrounding electronic equipment, but also greatly reduce the reliability of the power supply itself. Which, in order to prevent the switching Kai - closed the voltage surge, RC or LC buffers can be used, and the current surge can be caused by the diode stored charge of amorphous and other core made of magnetic buffer . However, the high frequency more than 1MHz, the resonant circuit to make the switch on the voltage or current through the switch was a sine wave, which can reduce switching losses, but also to control the occurrence of surges. This switch is called the resonant switch. Of this switching power supply is active, you can, in theory, because in this way do not need to greatly improve the switching speed of the switching losses reduced to zero, and the noise is expected to become one of the high-frequency switching power supply The main ways. At present, many countries in the world are committed to several trillion Hz converter utility.the principle of IntroductionThe switching power supply of the process is quite easy to understand, linear power supplies, power transistors operating in the linear mode and linear power, the PWM switching power supply to the power transistor turns on and off state, in both states, on the power transistor V - security product is very small (conduction, low voltage, large current; shutdown, voltage, current) V oltammetric product / power device is power semiconductor devices on the loss.Compared with the linear power supply, the PWM switching power supply more efficient process is achieved by "chopping", that is cut into the amplitude of the input DC voltage equal to the input voltage amplitude of the pulse voltage. The pulse duty cycle is adjusted by the switching power supply controller. Once the input voltage is cut into the AC square wave, its amplitude through the transformer to raise or lower. Number of groups of output voltage can be increased by increasing the number of primary and secondary windings of the transformer. After the last AC waveform after the rectifier filter the DC output voltage.The main purpose of the controller is to maintain the stability of the output voltage, the course of their work is very similar to the linear form of the controller. That is the function blocks of the controller, the voltage reference and error amplifier can be designed the same as the linear regulator. Their difference lies in the error amplifier output (error voltage) in the drive before the power tube to go through a voltage / pulse-width conversion unit.Switching power supply There are two main ways of working: Forward transformand boost transformation. Although they are all part of the layout difference is small, but the course of their work vary greatly, have advantages in specific applications.the circuit schematicThe so-called switching power supply, as the name implies, is a door, a door power through a closed power to stop by, then what is the door, the switching power supply using SCR, some switch, these two component performance is similar, are relying on the base switch control pole (SCR), coupled with the pulse signal to complete the on and off, the pulse signal is half attentive to control the pole voltage increases, the switch or transistor conduction, the filter output voltage of 300V, 220V rectifier conduction, transmitted through the switching transformer secondary through the transformer to the voltage increase or decrease for each circuit work. Oscillation pulse of negative semi-attentive to the power regulator, base, or SCR control voltage lower than the original set voltage power regulator cut-off, 300V power is off, switch the transformer secondary no voltage, then each circuit The required operating voltage, depends on this secondary road rectifier filter capacitor discharge to maintain. Repeat the process until the next pulse cycle is a half weeks when the signal arrival. This switch transformer is called the high-frequency transformer, because the operating frequency is higher than the 50HZ low frequency. Then promote the pulse of the switch or SCR, which requires the oscillator circuit, we know, the transistor has a characteristic, is the base-emitter voltage is 0.65-0.7V is the zoom state, 0.7V These are the saturated hydraulic conductivity state-0.1V-0.3V in the oscillatory state, then the operating point after a good tune, to rely on the deep negative feedback to generate a negative pressure, so that the oscillating tube onset, the frequency of the oscillating tube capacitor charging and discharging of the length of time from the base to determine the oscillation frequency of the output pulse amplitude, and vice versa on the small, which determines the size of the output voltage of the power regulator. Transformer secondary output voltage regulator, usually switching transformer, single around a set of coils, the voltage at its upper end, as the reference voltage after the rectifier filter, then through the optocoupler, this benchmark voltage return to the base of the oscillating tube pole to adjust the level of the oscillation frequency, if the transformer secondary voltage is increased, the sampling coil output voltage increases, the positive feedback voltage obtained through the optocoupler is also increased, this voltage is applied oscillating tube base, so that oscillation frequency is reduced, played a stable secondary output voltage stability, too small do not have to go into detail, nor it is necessary to understand the fine, such a high-power voltage transformer by switching transmission, separated and after the class returned by sampling the voltage from the opto-coupler pass separated after class, so before the mains voltage, and after the classseparation, which is called cold plate, it is safe, transformers before power is independent, which is called switching power supply.the DC / DC conversionDC / DC converter is a fixed DC voltage transformation into a variable DC voltage, also known as the DC chopper. There are two ways of working chopper, one Ts constant pulse width modulation mode, change the ton (General), the second is the frequency modulation, the same ton to change the Ts, (easy to produce interference). Circuit by the following categories:Buck circuit - the step-down chopper, the average output voltage U0 is less than the input voltage Ui, the same polarity.Boost Circuit - step-up chopper, the average output voltage switching power supply schematic U0 is greater than the input voltage Ui, the same polarity.Buck-Boost circuit - buck or boost chopper, the output average voltage U0 is greater than or less than the input voltage Ui, the opposite polarity, the inductance transmission.Cuk circuit - a buck or boost chopper, the output average voltage U0 is greater than or less than the input voltage Ui, the opposite polarity, capacitance transmission.The above-mentioned non-isolated circuit, the isolation circuit forward circuits, feedback circuit, the half-bridge circuit, the full bridge circuit, push-pull circuit. Today's soft-switching technology makes a qualitative leap in the DC / DC the U.S. VICOR company design and manufacture a variety of ECI soft-switching DC / DC converter, the maximum output power 300W, 600W, 800W, etc., the corresponding power density (6.2 , 10,17) W/cm3 efficiency (80-90)%. A the Japanese Nemic Lambda latest using soft-switching technology, high frequency switching power supply module RM Series, its switching frequency (200 to 300) kHz, power density has reached 27W/cm3 with synchronous rectifier (MOSFETs instead of Schottky diodes ), so that the whole circuit efficiency by up to 90%.AC / DC conversionAC / DC conversion will transform AC to DC, the power flow can be bi-directional power flow by the power flow to load known as the "rectification", referred to as "active inverter power flow returned by the load power. AC / DC converter input 50/60Hz AC due must be rectified, filtered, so the volume is relatively large filter capacitor is essential, while experiencing safety standards (such as UL, CCEE, etc.) and EMC Directive restrictions (such as IEC, FCC, CSA) in the AC input side must be added to the EMC filter and use meets the safety standards of the components, thus limiting the miniaturization of the volume of AC / DC power, In addition, due to internal frequency, high voltage, current switching, making the problem difficult to solve EMC also high demands on the internal high-density mountingcircuit design, for the same reason, the high voltage, high current switch makes power supply loss increases, limiting the AC / DC converter modular process, and therefore must be used to power system optimal design method to make it work efficiency to reach a certain level of satisfaction.AC / DC conversion circuit wiring can be divided into half-wave circuit, full-wave circuit. Press the power phase can be divided into single-phase three-phase, multiphase. Can be divided into a quadrant, two quadrant, three quadrants, four-quadrant circuit work quadrant.he selection of the switching power supplySwitching power supply input on the anti-jamming performance, compared to its circuit structure characteristics (multi-level series), the input disturbances, such as surge voltage is difficult to pass on the stability of the output voltage of the technical indicators and linear power have greater advantages, the output voltage stability up to (0.5)%. Switching power supply module as an integrated power electronic devices should be selected。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

矿产资源开发利用方案编写内容要求及审查大纲
矿产资源开发利用方案编写内容要求及《矿产资源开发利用方案》审查大纲一、概述
㈠矿区位置、隶属关系和企业性质。

如为改扩建矿山, 应说明矿山现状、
特点及存在的主要问题。

㈡编制依据
(1简述项目前期工作进展情况及与有关方面对项目的意向性协议情况。

(2 列出开发利用方案编制所依据的主要基础性资料的名称。

如经储量管理部门认定的矿区地质勘探报告、选矿试验报告、加工利用试验报告、工程地质初评资料、矿区水文资料和供水资料等。

对改、扩建矿山应有生产实际资料, 如矿山总平面现状图、矿床开拓系统图、采场现状图和主要采选设备清单等。

二、矿产品需求现状和预测
㈠该矿产在国内需求情况和市场供应情况
1、矿产品现状及加工利用趋向。

2、国内近、远期的需求量及主要销向预测。

㈡产品价格分析
1、国内矿产品价格现状。

2、矿产品价格稳定性及变化趋势。

三、矿产资源概况
㈠矿区总体概况
1、矿区总体规划情况。

2、矿区矿产资源概况。

3、该设计与矿区总体开发的关系。

㈡该设计项目的资源概况
1、矿床地质及构造特征。

2、矿床开采技术条件及水文地质条件。

本科毕业设计(论文)外文翻译译文

本科毕业论文外文翻译【范本模板】

毕业论文(设计)外文文献翻译及原文

外文翻译于

毕业设计(论文)外文翻译(原文)

本科毕业设计外文翻译(中文)

(范例)外文翻译格式

毕业设计外文翻译模板

毕业设计论文外文文献翻译

毕业设计(论文)外文翻译【范本模板】

外文翻译--生产制造过程中对于环境有利的改进方法

外文翻译

毕业设计外文翻译

外文翻译 屋顶花园

毕业设计(论文)外文翻译

毕业设计外文文献翻译【范本模板】

外文翻译

本科毕业设计(论文)外文翻译译文

毕业设计英文 翻译(原文)

外文翻译屋顶花园

毕业设计英文翻译(原文)