16.0_SCDM_Configuration
合集下载
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Note: All SpaceClaim Engineering products released with or after Workbench 16.0 have modified their installations to automatically unconfigure the 16.0 version of ANSYS SpaceClaim Direct Modeler if it is detected.
SpaceClaim Products Installed Prior to Workbench 16.0 Installation
ANSYS SpaceClaim Direct Modeler will not be configured during installation of Workbench if a previous installed version of SpaceClaim Direct Modeler or SpaceClaim Engineer is detected. If desired, ANSYS SpaceClaim Direct Modeler can be configured manually, following the removal of previously installed versions. To configure manually, execute the AnsConfigSpaceClaim.exe from the following ANSYS installation location: <INSTALL_PATH>\common files\configs\winx64\config\
SpaceClaim Direct Modeler ConBiblioteka Baiduiguration
The 16.0 version of SpaceClaim Direct Modeler is not compatible with Workbench versions prior to 15.0. Use of SpaceClaim Direct Modeler with Workbench versions prior to 15.0 requires SpaceClaim Direct Modeler 2014 SP2. Installing SpaceClaim products released prior to Workbench 16.0 is not supported. Doing so will result in unexpected behaviors. The 16.0 version of SpaceClaim Direct Modeler can be disabled to allow prior versions of SpaceClaim products to assume the linked connection to Workbench by executing AnsUnconfigSpaceClaim.exe from the following ANSYS installation location: <INSTALL_PATH>\common files\configs\winx64\unconfig\
Note: Once the 16.0 version of ANSYS SpaceClaim Direct Modeler has been unconfigured, prior SpaceClaim product versions can be installed/re-installed.