SEP8505-002中文资料

合集下载

Sepax 产品特性及典型应用

粒径：3、5、10µm
比表面积：300 m²/g
碳载量：19.5%
pH范围：1.5-10.5
罗红霉素、红霉素、阿奇霉素、头孢曲松钠和中药葛根等、金霉素、硫氰酸红霉素、盐酸林可霉素、雷公藤生物碱、棕榈酸酯、利醅酮
Bio-C18
大孔径200 Å、300 Å
孔径：200 Å、300 Å
粒径：3、5、10µm
碳载量：11.0%
pH范围：2.0-7.0
注射用硝普钠、盐酸伪麻黄碱、阿普唑仑、依托泊苷、中药莱菔子、忍冬藤、邻苯二甲酸单酯
PolyRP
含苯基官能团、疏水相互作用、
极端pH适用性（1-14）
孔径：0 Å、100 Å、300 Å、500 Å、1000 Å
粒径：3、5、10µm
交联度：80%
pH范围：1.0-14.0
DNA
Zenix SEC
高分辨高柱效
孔径：100 Å、150 Å、300 Å、
粒径：3µm
pH范围：2.0-8.5
单层直立状的化学键合层
蛋白药物（人血白蛋白、免疫球蛋白、HGH、EPO等）
多肽(Peptide)
水溶性多聚物（多糖、PEG）
抗生素（头孢类抗生素，头孢地嗪纳）
抗体（Antibodies）
HP-C18
耐100%水相
孔径：120 Å
粒径：3、5、7、10µm
比表面积：300 m²/g
碳载量：17%
pH范围：2.0-8.0
阿莫西林、注射用环磷腺苷、缬沙坦、维生素B12、毒杀单、噻杀单、氯氨酸、咖啡因、井冈霉素、核苷酸、苯甲酸类防腐剂、邻羟基扁桃酸钠
BR-C18
耐碱性（pH10.5）
孔径：120 Å
普通凝胶渗透色谱

NFPA850-2005版中涉及规范版本号清单

NFPA850-2005版涉及的引用规范清单NFPA 10, Standard for Portable Fire Extinguishers, 2002 edition. NFPA 11, Standard for Low-, Medium-, and High-Expansion Foam, 2005 edition.NFPA 12, Standard on Carbon Dioxide Extinguishing Systems,2005 edition.NFPA12A, Standard on Halon 1301 Fire Extinguishing Systems, 2004 edition.NFPA13, Standard for the Installation of Sprinkler Systems, 2002 edition.NFPA 14, Standard for the Installation of Standpipe and Hose Systems, 2003 edition.NFPA 15, Standard for Water Spray Fixed Systems for Fire Protection, 2001 edition.NFPA 16, Standard for the Installation of Foam-Water Sprinklerand Foam-Water Spray Systems, 2003 edition.NFPA 17, Standard for Dry Chemical Extinguishing Systems,2002 edition.NFPA 20, Standard for the Installation of Stationary Pumps forFire Protection, 2003 edition.NFPA 22, Standard for Water Tanks for Private Fire Protection, 2003 edition.NFPA 24, Standard for the Installation of Private Fire ServiceMains and Their Appurtenances, 2002 edition.NFPA 25, Standard for the Inspection, Testing, and Maintenanceof Water-Based Fire Protection Systems, 2002 edition.NFPA 30, Flammable and Combustible Liquids Code, 2003 edition.NFPA 30A, Code for Motor Fuel Dispensing Facilities and Repair Garages, 2003 edition.NFPA 31, Standard for the Installation of Oil-Burning Equipment, 2001 edition.NFPA 37, Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines, 2002 edition.NFPA 51B, Standard for Fire Prevention During Welding, Cutting, and Other Hot Work, 2003 edition.NFPA 54, National Fuel Gas Code, 2002 edition.NFPA 55, Standard for the Storage, Use, and Handling of Compressed Gases and Cryogenic Fluids in Portable and Stationary Containers, Cylinders, and Tanks, 2005 edition.NFPA 58, Liquefied Petroleum Gas Code, 2004 edition.NFPA 61, Standard for the Prevention of Fires and Dust Explosionsin Agricultural and Food Processing Facilities, 2002 edition.NFPA 68, Guide for Venting of Deflagrations, 2002 edition.NFPA 69, Standard on Explosion Prevention Systems, 2002edition.NFPA 70, National Electrical Code®, 2005 edition.NFPA 72®, National Fire Alarm Code®, 2002 edition.NFPA 75, Standard for the Protection of Information Technology Equipment, 2003 edition.NFPA77, Recommended Practice on Static Electricity, 2000 edition. NFPA80, Standard for Fire Doors and FireWindows, 1999 edition. NFPA 80A, Recommended Practice for Protection of Buildingsfrom Exterior Fire Exposures, 2001 edition.NFPA 85, Boiler and Combustion Systems Hazards Code, 2004 edition.NFPA90A, Standard for the Installation of Air-Conditioning and Ventilating Systems, 2002 edition.NFPA 90B, Standard for the Installation of Warm Air Heatingand Air-Conditioning Systems, 2002 edition.NFPA 91, Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids, 2004 edition.NFPA 92A, Recommended Practice for Smoke-Control Systems,2000 edition.NFPA 101®, Life Safety Code®, 2003 edition.NFPA 110, Standard for Emergency and Standby Power Systems, 2005 edition.NFPA204, Standard for Smoke and Heat Venting, 2002 edition.NFPA 214, Standard on Water-Cooling Towers, 2005 edition.NFPA 220, Standard on Types of Building Construction, 1999 edition.NFPA 230, Standard for the Fire Protection of Storage, 2003 edition.NFPA 241, Standard for Safeguarding Construction, Alteration,and Demolition Operations, 2004 edition.NFPA251, Standard Methods of Tests of Fire Endurance of Building Construction and Materials, 1999 edition.NFPA 252, Standard Methods of Fire Tests of Door Assemblies,2003 edition.NFPA 253, Standard Method of Test for Critical Radiant Flux ofFloor Covering Systems Using a Radiant Heat Energy Source, 2000 edition.NFPA 255, Standard Method of Test of Surface Burning Characteristics of Building Materials, 2000 edition.NFPA 256, Standard Methods of Fire Tests of Roof Coverings,2003 edition.NFPA 257, Standard on Fire Test for Window and Glass BlockAssemblies, 2000 edition.NFPA 259, Standard Test Method for Potential Heat of Building Materials, 2003 edition.NFPA 600, Standard on Industrial Fire Brigades, 2005 edition.NFPA 601, Standard for Security Services in Fire Loss Prevention, 2005 edition.NFPA664, Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities, 2002 edition.NFPA 701, Standard Methods of Fire Tests for Flame Propagationof Textiles and Films, 2004 edition.NFPA 704, Standard System for the Identification of the Hazardsof Materials for Emergency Response, 2001 edition.NFPA 750, Standard onWater Mist Fire Protection Systems, 2003 edition.NFPA 780, Standard for the Installation of Lightning Protection Systems, 2004 edition.NFPA 805, Performance-Based Standard for Fire Protection forLight Water Reactor Electric Generating Plants, 2001 edition.NFPA 851, Recommended Practice for Fire Protection for Hydroelectric Generating Plants, 2005 edition.NFPA 1143, Standard for Wildland Fire Management, 2003edition.NFPA 1144, Standard for Protection of Life and Property from Wildfire, 2002 edition.NFPA1221, Standard for the Installation, Maintenance, and Useof Emergency Services Communications Systems, 2002 edition.NFPA 1962, Standard for the Inspection, Care, and Use of Fire Hose, Couplings, and Nozzles and the Service Testing of Fire Hose, 2003 edition.NFPA 1971, Standard on Protective Ensemble for Structural Fire Fighting, 2000 edition.NFPA 2001, Standard on Clean Agent Fire Extinguishing Systems, 2004 edition.2.3 Other Publications.2.3.1 ANSI Publication. American National Standards Institute, Inc., 25 West 43rd Street, 4th Floor, New York, NY 10036.ANSI C2, National Electrical Safety Code, 1981.2.3.2 ASME Publication. American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990.ASME B31.1, Power Piping, 1998.2.3.3 ASTM Publications. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA19428-2959.ASTM D 92, Standard Test Method for Flash and Fire Points byCleveland Open Cup, 2003.ASTM D 448, Standard Classification for Sizes of Aggregate forRoad and Bridge Construction, 2003.ASTM E 136, Standard Test Method for Behavior of Materials ina Vertical Tube Furnace at 750°C, 1994.ASTM E 814, Fire Tests of Through-Penetration Fire Stops, 1994. ASTM SI 10, Standard for Use of the International System ofUnits (SI): the Modern Metric System, 1997.2.3.4 IEEE Publications. Institute of Electrical and Electronics Engineers, Three Park Avenue, 17th Floor, New York, NY10016-5997.IEEE 383, Standard for Type Test of Class IE Electric Cables, Field Splices and Connections for Nuclear Power Generating Stations, 1974. IEEE 484, Recommended Practice for Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and Substations, 1987.IEEE 634, Testing of Fire Rated Penetration Seals, 1978.2.3.5 UL Publications. Underwriters Laboratories Inc.,333 Pfingsten Road, Northbrook, IL 60062-2096.UL 900, Standard for Safety Test Performance of Air Filters, 1995.UL 1479, Standard for Fire Tests of Through-Penetration Firestops, 2003.2.3.6 U.S. Government Publication. U.S. Government Printing Office, Washington, DC 20402.Title 29, Code of Federal Regulations, Part 1910.156, “Fire Brigades,” 1986.。

8-UL1699B_PV_AFCI-Zgonena-14Sept2012

SU 1699B - PV DC Arc-Fault Circuit Protection AFCI
• Scope Includes: – Requirements cover DC photovoltaic arc-fault circuit protection devices for use in PV systems as described in Article 690 of the NEC. – Protection is intended to mitigate the effects of arcing faults that may pose a risk of fire. – Covers PV dc arc-fault circuit-interrupters (AFCI), arcfault detectors (AFD), interrupting devices (ID) and – inverters, converters, and charge controllers with integral arc-fault circuit interrupter protection. – Rated up to 1000V dc. – Includes optional parallel tests but not required by 690.11
Subject 1699B Tests
Humidity Leakage Voltage surge Environmental sequence Arc fault detection Unwanted tripping Inhibition Temperature Overvoltage Overload Endurance Dielectric Withstand Abnormal Short circuit Corrosion Test Crushing Strain relief Mechanical Resistance to Environmental Noise Electrostatic discharge Radiated EMI Fast transients Voltage surge Induced RF fields Voltage dips Surge current Abnormal overvoltage

Honeywell霍尔流量传感器

Honeywell霍尔流量传感器广州南创谭工美国Honeywell流量传感器是一家财富100强公司发明和生产技术，以解决与全球宏观趋势，如安全性，安全性和能源的严峻挑战。

美国Honeywell流量传感器全球约132,000名员工，其中包括超过19,000名工程师和科学家，Honeywell 霍尔流量传感器的产品在多个国家设立了国外办事处及售后服务中心，并在中国设立了广州南创传感器事业部，为美国Honeywell流量传感器提供最佳的服务与解决方案。

有质量，交货，价值，和Honeywell霍尔流量传感器做的一切技术的不懈重点。

Honeywell霍尔流量传感器图片：Honeywell霍尔流量传感器自动化和控制解决方案美国Honeywell的环境控制，生命安全，安全，遥感，扫描，移动产品，以及建筑和工艺解决方案是在工作中，在150万个家庭，10万座建筑物，5000工业设施，以及数以百计的全球天然气和电力公用事业。

美国Honeywell的产品和解决方案，使客户能够捕获更多和更好的数据，更快的速度和整个无线景观，提高生产率，安全性和安全性，推动更好的决策，并降低了成本。

Honeywell霍尔流量传感器航天美国Honeywell流量传感器的航空航天产品和服务用于全球几乎所有的商业和商务飞机经营的今天，以及国防和空间应用。

美国Honeywell提供综合航空电子系统，发动机，系统和服务解决方案，认真听取美国Honeywell的客户和重点放在最能满足他们的需求，使飞行更安全，更可靠，更高效，更具成本效益的技术。

Honeywell霍尔流量传感器高性能材料和技术以开发和制造先进的材料和工艺技术，是人每天使用，以减少温室气体排放，阻止子弹，使生产的绿色燃料，增加炼油能力，加速药物发现，和保护药品的全球领先地位。

美国Honeywell的先进材料制造尼龙至计算机芯片医药包装产品，以及工艺技术由霍尼韦尔公司的UOP公司的形式大部分世界炼油厂的基础有效地生产汽油，柴油，喷气燃料，石油化工和生物燃料开发的关键。

美国Honeywell霍尔传感器

美国Honeywell霍尔传感器广州南创谭工美国Honeywell流量传感器是一家财富100强公司发明和生产技术，以解决与全球宏观趋势，如安全性，安全性和能源的严峻挑战。

美国Honeywell流量传感器全球约132,000名员工，其中包括超过19,000名工程师和科学家，美国Honeywell霍尔传感器的产品在多个国家设立了国外办事处及售后服务中心，并在中国设立了广州南创传感器事业部，为美国Honeywell流量传感器提供最佳的服务与解决方案。

有质量，交货，价值，和美国Honeywell流量传感器做的一切技术的不懈重点。

美国Honeywell霍尔传感器图片：产品名称：美国Honeywell霍尔传感器产品型号：AWM3000系列产品品牌：美国Honeywell流量传感器所属分类：气体质量流量传感器美国Honeywell霍尔传感器以N2、CO2、Ar进行的激光校准接口：传感器有各种流量接口可选安装：美国Honeywell霍尔传感器采用远程安装产品特性描述：美国Honeywell霍尔传感器能承受50psi的共模压力，包含放大、线性修正、温度补偿和气体标定，Honeywell AWM5000流量传感器系列为文丘里流量管型外壳，可以测量最高至20升/分的流量，传感器最大压降2.25″水柱的气流，微桥芯片直接与气流接触，大大减少了由于通气孔或旁路堵塞引起的误差。

美国Honeywell霍尔传感器小流量传感器为输出1-5V气体质量流量传感器，传感器内部集成发热器控制电路、双传感电路、差分放大电路，量程30sccm、200sccm、1000sccm。

美国Honeywell霍尔传感器微差压双向流量系列传感器以极小流量检测为主，输出4～20mA，量程0～0.5″水柱、0～2″水柱、±1000sccm。

美国Honeywell霍尔传感器自动化和控制解决方案美国Honeywell的环境控制，生命安全，安全，遥感，扫描，移动产品，以及建筑和工艺解决方案是在工作中，在150万个家庭，10万座建筑物，5000工业设施，以及数以百计的全球天然气和电力公用事业。

2004-Fucoxanthin and Its Metabolites in Edible Brown Algae=FX=NMR分析

Mar. Drugs 2004, 2
64
(3) low temperature convenient for aquaculture. Kochi Prefectural DSW Laboratory is supplying about 1000 tons of DSW per day, and the water has been industrialized as a material for cosmetics, beverages, and foods such as miso (fermented soybean paste), tofu (bean curd), and dried fish. Recently, the laboratory has started a new project that aims to use DSW as a cultivation medium for edible seaweeds based on the above-mentioned merits. the tank supplied DSW throughout the year. Cooperative in Kochi Prefecture. During the course of our study to obtain pharmacologically active compounds from the algae that are cultivated in DSW, we focused our attention on fucoxanthin (FUCOX) (1) [2], a carotenoid commonly distributed in brown algae. FUCOX is a potent drug candidate and can be utilized as Recently, the apoptosis activity against HL-60 an excellent supplement like astaxanthin [3], since it acts as an antioxidant [4] and inhibits GOTO cells of neuroblastoma and colon cancer cells [5]. and Caco-2 cells has been reported for FUCOX [6]. This paper deals with the content of FUCOX in four brown algae cultivated in DSW in addition to the structure determination of a new compound (2) isolated from Scytosiphon lomentaria (Lingbye) Link. Results and Discussion At first, a brown alga, Scytosiphon lomentaria, cultivated in DSW, was selected as a model for analyzing the content of FUCOX (1). In order to obtain pure 1, the dichloromethane extract was subjected to flash column chromatography followed by preparative TLC and HPLC. By these procedures, pure 1 was obtained in 0.0081% yield from the crude extract together with compounds 2, 3, and 4. The identity of FUCOX was established by comparing its 1H- and

USCAR-2(中文第5版)-2009[1].03.17

研究数据、分析、结论、观点和本文的其他内容仅仅是作者的产品。

无论是汽车工程师协会(SAE)还是美国汽车研究委员会(USCAR)都不会出具任何证明某些产品符合基本要求的证书，也不会对本文内容的准确性和适用性作任何介绍。

确定本文内容是否适用于自己的目的，完全是本文用户责任。

版权 2004, USCAR 美国印刷
版权所有
有关本文件的问题： (724) 772-8545 传真 (724)776-0243
要订购文件： (724) 776-4970 传真 (724) 776-0790
Lock overtravel
Forward stop contacted
向前止动接触
Decreasing
Recognizable travel
distance
如果有适用的设备，强烈建议绘制所施加的啮合力与插入距离之间的连续对照图。

一个结构合理和密封系统，如适用的话) 应当能够绘制出一张图，其中显示力平稳上升至一个峰值，然后下降直至连接器完全啮合。

如果图中显示一个以上的力的峰值，锁止机构就可能存在错误。

第五修订版修订日期：2007-11
汽车电器连接器系统的性能标准
毫米/分的速率增加啮合力，直至完全啮合为止。

试验所有样品
．记录将每一套连接器的一半完全插入另外一半，直至锁定位置所需要使用的力并且用这些数值来验证每一对连接器是否符合5.4.2.4 章节的验收标准。

对已配合好的不包含端子和导线连接器。

、。

Seppro

Seppro®IgY 14 LC10 ColumnCatalog Number SEP040Storage Temperature 2–8 °CTECHNICAL BULLETINProduct DescriptionThe Seppro®IgY 14 Liquid Chromatography 10 (LC10) Column is based on avian antibody (IgY)-antigen interactions and optimized buffers for sample loading, washing, eluting, and column regeneration. The column is specifically designed to remove fourteen highly abundant proteins from human fluids such as serum or plasma. The following proteins are depleted in a single step:Albumin IgGα1-Antitrypsin IgAIgM TransferrinHaptoglobin α2-Macroglobulin Fibrinogen Complement C3α1-Acid Glycoprotein (Orosomucoid)HDL (Apolipoproteins A-I and A-II)LDL (mainly Apolipoprotein B)The targeted highly abundant proteins are simultaneously removed by the immobilized specific IgYs when crude biological samples are passed through the column.Selective immunodepletion provides an enriched pool of low abundance proteins for downstream proteomic analyses. Specific removal of these fourteen highly abundant proteins depletes ∼95% of the total protein mass from human serum or plasma. The low abundance proteins in the flow-through fractions can then be studied. Removal of highly abundant proteins enables improved resolution and dynamic range for one dimensional electrophoresis (1DGE), two dimensional (2DGE) electrophoresis, and liquid chromatography/ mass spectrometry (LC/MS). The collected flow-through fractions may need to be concentrated dependent upon the downstream application.Characteristics of the IgY 14 LC10 ColumnSize: 12.7 ×79.0 mm(10 ml bed volume)Capacity: 10.0 mg of total protein or ∼143 µl of human plasma based on an average protein concentration of 70 mg protein/ml.Note: If the protein concentration of the sample is unknown and the total serum protein level is potentially elevated, a reduction of the serum load to 100 µl is recommended for initial study to avoid potential abundant protein bleed through.Total protein mass removal: ∼95%Targeted depletion efficiency: 95% (average) Maximum operation pressure: 350 psi (21 bars) Antibody-modified resin only withstands 100 psi Flow rate: 0.5–2.0 ml/minuteOperating temperature: 18–25 °CShipping Buffer: 1×Dilution Buffer with 0.02% sodium azideColumn body materials: Polycarbonate column cylinder, Polyethylene frit, Tefzel®caps, Buna-N-rubberO-rings, Delrin®nut fittings, ETFE ferrules, andPTFE PFA tubing.Usage: Column may be used 100 times.2ComponentsSeppro IgY 14 LC10 Column 1 each (Catalog Number S5074)10×Dilution Buffer 3 ×200 ml Tris-Buffered Saline (TBS) -100 mMTris-HCl with 1.5 M NaCl, pH 7.4(Catalog Number S4199)10×Stripping Buffer 3 ×200 ml1 M Glycine, pH 2.5(Catalog Number S4324)10×Neutralization Buffer 3 ×80 ml1 M Tris-HCl, pH 8.0(Catalog Number S4449)Corning®Spin-X®Centrifuge Tube Filters 1 pack0.45 µm, pack of 100(Catalog Number CLS8163)Precautions and DisclaimerThis product is for R&D use only, not for drug, household, or other uses. Please consult the Material Safety Data Sheet for information regarding hazards and safe handling practices.Specimen collection needs to utilize universal precautions.Preparation InstructionsPreparation of 1×concentration buffers -Separately dilute the three 10×buffers (Dilution, Stripping, and Neutralization Buffers) 10-fold with water. If precipitation occurs in the 10×buffers, allow the bottle to warm to room temperature and mix untilcompletely dissolved prior to use. Do not dilute all of the 10×Neutralization Buffer, save a volume of the 10×neutralization buffer for neutralization of eluted bound proteins if analysis of bound proteins is desired. Sample Preparation -It is not recommended to load unfiltered serum directly onto the column. Human serum samples should be diluted 5-fold with 1×Dilution Buffer. Samples may contain particulate materials, which can be removed with a 0.45 µm spin filter, centrifuge for 1 minute at 9,000 ×g.Storage/StabilityStore the column at 2–8 °C. After use, equilibrate the column with 1×Dilution Buffer containing 0.02% sodium azide and store the column at 2–8 °C with the end-caps tightly sealed. Do Not Freeze the column.ProcedureNote: Always use the three 1×buffers as the mobile phases for the LC procedure. Adjust the LC procedure appropriately for the instrumentation being used. Do not expose the column to solvents other than the three 1×buffers. Do not expose the column to organic solvents (like alcohols, acetonitrile, etc.), strong oxidizers, acids, or reducing agents and other protein denaturing agents (urea).1.Set up the three 1×buffers as the only mobilephases.2.Purge lines with the three 1×buffers and run the1×Dilution Buffer at 2 ml/minute without a columnto check the system back pressure.Note: The maximum operation pressure includesthe pressure introduced by the column and thesystem backpressure from the instrument. Usually, the pressure introduced by the column is less than50 psi. It is important to first check the systembackpressure of the instrument before using thiscolumn. If the system backpressure is more than300 psi, use tubing with a larger I.D.or change the flow-cell to tubing with a larger I.D. to reduce thesystem backpressure.3.Attach the column to chromatography instrument(see Appendix) and equilibrate it with1×DilutionBuffer for 20 minutes at a flow rate of 2.0 ml/minute to obtain a flat baseline.4.Set up a LC timetable (see Table 1) and run twomethod blanks by injecting 1,250µl of1×DilutionBuffer.Note: Adjust LC timetable based on instrumentation available, if necessary.5.Inject 1,250 µl of the diluted and filtered serum (seeSample Preparation), start with a flow rate of0.5 ml/minute for 30 minutes, wash the column at aflow rate of 2.0 ml/minute for 5 minutes, collectflow-through fraction, and store collected fractionsat –70 °C if not analyzed immediately.Note: Due to high salt concentration in the1×Dilution Buffer, buffer exchange of the flow-through fractions to a volatile buffer (for example,ammonium bicarbonate) is recommended prior tolyophilization.36.Elute bound proteins from the column with1×Stripping Buffer at a flow rate of 2.0 ml/minutefor 15 minutes and neutralize the eluted fractionswith 0.1×fraction volume of 10×Neutralizing Buffer.Note: Do not expose the column to the 1×Stripping Buffer for more than 20 minutes.7.Neutralize the column with 1×Neutralizing Buffer ata flow rate of 2.0 ml/minute for 10minutes.8.Re-equilibrate the column with 1×Dilution Buffer foran additional 10 minutes at a flow rate of2.0 ml/minute. The re-equilibrated column may bestored with 1×Dilution Buffer with 0.02% sodiumazide at 2–8 °C. Do Not Freeze the column.Table 1.Timetable for IgY 14 LC10 columnDetector Model: 166.ResultsFigure 1.Typical Depletion ChromatogramPeaks A & B aredepleted fractions.Peak C is boundfraction.ABC4AppendixTips for fitting column to most chromatography instruments1.Adapting the column (M6 fitting) to most HPLCsystems• Option 1: female M6 to male 10-32 one-piece adapter (Catalog Number 55069) -Most HPLCinstruments use 10-32 fittings with 1/16″tubing,so an adapter (one-piece fitting) can be used toconnect the column to the instrument. Thisinexpensive approach uses an adapter, a one-piece fitting with female M6 threading at oneend, to accept the male M6 fitting on the tubingconnected to the column, and 10-32 malethreading on the other end, to fit into thedetector or injector.Note: Use of this adapter will require removal ofthe fitting on the injector or detector.• Option 2: female M6/male 10-32 fitting tofemale 10-32/female 10-32 fitting two-pieceadapter (Catalog Number55068) –A two-pieceadapter can be used without changing thedetector or injector fittings on the HPLC. Again,the inexpensive approach is a two-pieceadapter. The female M6 end of the female/malefitting accepts the male M6 fitting from thecolumn, the male 10-32 end fits into one end ofthe female/ female 10-32 fitting. The other endof the female/female fitting accepts the 10-32fitting on the HPLC tubing.2.Adapting the column (M6 fitting) to non-metricmedium/low pressure liquid chromatographysystems• Option 1: female 1/4-28 to male 10-32 one-piece adapter (Catalog Number 55071) plus10-32 to female M6 two-piece adapter (CatalogNumber 55068) -Many medium/low pressuresystems use 1/4-28 fittings. An one-pieceadapter along with a two-piece adapter can beused to connect the column with M6 fittings tothese instruments. This method requires havingtubing with 1/4-28 fittings on the injector anddetector. These fittings will thread into thefemale 1/4-28 to male 10-32 fitting (CatalogNumber 55071). The male 10-32 will tread intothe two-piece adapter (Catalog Number 55068)that will then join to the M6 fitting.• Option 2: female 1/4-28 to female M6 one-piece adapter(Catalog Number 59259-U) -Like Option 1, this option requires the tubing onthe injector and detector already have male1/4-28 fittings. The male 1/4-28 fitting willthread into the adapter that will then join it tothe male M6 fitting.Note:Be sure to order two of these parts, onefor each end of the column.Troubleshooting GuideHigh backpressure -Clogged inlet frits may result in high backpressure, distorted peak shape, and diminished column lifetime. To prevent these problems, remove particulates from samples with a spin filter before loading.No bound fraction peak -Bound proteins can only be removed from the column by eluting with 1×Stripping Buffer. Check LC timetable to ensure enough column exposure time to the 1×Stripping Buffer for complete removal of bound proteins.Abnormal peak height -∼95% of serum/plasma proteins will be removed as the bound fraction. The peak height of the bound fraction is expected to be much greater than that of the flow-through fraction. If this order is reversed, two possibilities may be checked:• Column may not have been regenerated properly after previous use,resulting in lost capacity. Tocorrect this, elute bound proteins with 2 additionalcolumn volumes of 1×Stripping Buffer and thenneutralize and re-equilibrate the column with1×Neutralizing Buffer and 1×Dilution Buffer.• Check for signs of biological growth in the buffer reservoirs. Replace with fresh buffers for optimized column performance.Seppro is a registered trademark of Sigma-Aldrich®Biotechnology LP and Sigma-Aldrich Co.Corning and Spin-X are registered trademarks of Corning, Inc.Delrin and Tefzel are registered trademarks of E.I. du Pont de Nemours & Co., Inc.TD,KR,DEC,MAM,MJM 11/14-2©2014 Sigma-Aldrich Co. LLC. All rights reserved. SIGMA-ALDRICH is a trademark of Sigma-Aldrich Co. LLC, registered in the US and other countries. Sigma brand products are sold through Sigma-Aldrich, Inc. Purchaser must determine the suitability of the product(s) for their particular use. Additional terms and conditions may apply. Please see product information on the Sigma-Aldrich website at and/or on the reverse side of the invoice or packing slip.。

2SK3875-01中文资料

IDSS
IGSS RDS(on) gfs Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VSD trr Qrr
Test Conditions ID= 250µA VGS=0V ID= 250µA VDS=VGS
VDS=900V VGS=0V Tch=25°C
10-2
10-3
10-6
10-5
10-4
10-3
10-2
10-1
100
t [sec]
http://www.fujielectric.co.jp/fdt/scd/
4
(Zth(ch-c) [°C/W])
Item Drain-Source Breakdown Voltage Gate Threshold Voltage
Zero Gate Voltage Drain Current
Gate-Source Leakage Current Drain-Source On-State Resistance Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-On Time ton
Applications Switching regulators UPS (Uninterruptible Power Supply) DC-DC converters
Maximum ratings and characteristic
Absolute maximum ratings (Tc=25°C unless otherwise specified)
Min. 900

CIRCALOK 6008黑色塑料编码表说明书

USA SAFETY DATA SHEET3000000058361. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct name: CIRCALOK 6008 BLACK Product Use/Class:EncapsulantLORD Corporation 111 LORD DriveCary, NC 27511-7923 USATelephone: 814 868-3180Non-Transportation Emergency: 814 763-2345 Chemtrec 24 Hr Transportation Emergency No.800 424-9300 (Outside Continental U.S. 703 527-3887)EFFECTIVE DATE: 06/21/20162. HAZARDS IDENTIFICATIONGHS CLASSIFICATION:Skin corrosion/irritation Category 2Serious eye damage/eye irritation Category 2A Skin sensitization Category 1Hazardous to the aquatic environment - acute hazard Category 1 Hazardous to the aquatic environment - chronic hazard Category 2GHS LABEL ELEMENTS: Symbol(s)Signal WordW ARNINGHazard StatementsCauses skin irritation.Causes serious eye irritation.May cause an allergic skin reaction. Very toxic to aquatic life.Toxic to aquatic life with long lasting effects.Precautionary Statements PreventionWear protective gloves/eye protection/face protection. Avoid breathing dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling.Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment.ResponseSpecific treatment (see supplemental first aid instructions on this label). IF ON SKIN: Wash with plenty of soap and water.If skin irritation or rash occurs: Get medical advice/attention.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse.Collect spillage.StorageRefer to Section 7 of this SDS.Disposal:Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.Other Hazards:This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s).Acute: May cause respiratory tract irritation. May be absorbed through the skin in harmful amounts. Harmful ifswallowed. Ingestion is not an expected route of entry in industrial or commercial uses.Chronic: Prolonged or repeated contact may result in dermatitis. IARC has designated carbon black as Group 2B - inadequate evidence for carcinogenicity in humans, but sufficient evidence in experimental animals. In 2006 IARC reaffirmed its 1995 finding that there is "inadequate evidence" from human health studies to assess whether carbon black causes cancer in humans. Further, epidemiological evidence from well-conducted investigations has shown no causative link between carbon black exposure and the risk of malignant or non-malignant respiratory disease inhumans. Prolonged exposure to the silica-containing sanding dust of this product could cause long-term lung damage.Crystalline silica is classified by IARC and NTP as a known human carcinogen as a respirable dust. The silica in LORD products is not in a form that can be inhaled and presents no risk to the end user. No exposure is expected during normal use of this product. Sanding or abrading the cured materials is not recommended. Wear appropriate respiratory protection if exposure to dusts is possible.3. COMPOSITION/INFORMATION ON INGREDIENTSChemical Name CAS Number RangeEpoxy resin PROPRIETARY35 - 40%Alkyl (C12-14)glycidyl ether68609-97-2 5 - 10%Epoxy novolac resin PROPRIETARY 1 - 5%Crystalline silica14808-60-70.1 - 0.9%Carbon black1333-86-40.1 - 0.9%Any "PROPRIETARY" component(s) in the above table is considered trade secret, thus the specific chemical and its exact concentration is being withheld.4. FIRST AID MEASURESFIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding eyelids open while flushing. Get prompt medical attention.FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is difficult, give oxygen. Get immediate medical attention.FIRST AID - INGESTION: If swallowed, do not induce vomiting. Call a physician or poison control center immediately for further instructions. Never give anything by mouth if victim is rapidly losing consciousness, unconscious or convulsing.5. FIRE-FIGHTING MEASURESSUITABLE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water FogUNSUITABLE EXTINGUISHING MEDIA: Not determined for this product.SPECIFIC HAZARDS POSSIBLY ARISING FROM THE CHEMICAL: Keep containers tightly closed. Closed containers may rupture when exposed to extreme heat. Use water spray to keep fire exposed containers cool. During a fire, irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion.SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). If water is used, fog nozzles are preferable.6. ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES: Avoid contact. Avoid breathing vapors. Use appropriate respiratory protection for large spills or spills in confined area.ENVIRONMENTAL PRECAUTIONS: Do not contaminate bodies of water, waterways, or ditches, with chemical or used container.METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP: Keep non-essential personnel a safe distance away from the spill area. Notify appropriate authorities if necessary. Avoid contact. Before attempting cleanup, refer to hazard caution information in other sections of the SDS form. Scoop spilled material into an appropriate container for proper disposal. (If necessary, use inert absorbent material to aid in containing the spill).7. HANDLING AND STORAGEHANDLING: Keep closure tight and container upright to prevent leakage. Avoid skin and eye contact. Wash thoroughly after handling. Do not handle until all safety precautions have been read and understood. Empty containers should not be re-used. Use with adequate ventilation.STORAGE: Store only in well-ventilated areas. Keep container closed when not in use.INCOMPATIBILITY: Amines, acids, water, hydroxyl, or active hydrogen compounds.8. EXPOSURE CONTROLS/PERSONAL PROTECTIONCOMPONENT EXPOSURE LIMITChemical Name ACGIH TLV-TWA ACGIH TLV-STELOSHA PEL-TWAOSHA PEL-CEILINGSkinEpoxy resin N.E.N.E.N.E. N.E.N.A.Alkyl (C12-14)glycidyl ether N.E.N.E.N.E. N.E.N.A.Epoxy novolac resin N.E.N.E.N.E. N.E.N.A.Crystalline silica0.05 mg/m3N.E.N.E. N.E.N.A.Carbon black 3 mg/m3N.E. 3.5 mg/m3 N.E.N.A.N.A. - Not Applicable, N.E. - Not Established, S - Skin DesignationEngineering controls: Sufficient ventilation in pattern and volume should be provided in order to maintain air contaminant levels below recommended exposure limits.PERSONAL PROTECTION MEASURES/EQUIPMENT:RESPIRATORY PROTECTION: Use a NIOSH approved air-purifying organic vapor respirator if occupational limits are exceeded. For emergency situations, confined space use, or other conditions where exposure limits may be greatly exceeded, use an approved air-supplied respirator. Observe OSHA regulations (29CFR 1910.134) forrespirator use.SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where splashing may occur.OTHER PROTECTIVE EQUIPMENT: Use disposable or impervious clothing if work clothing contamination is likely. Remove and wash contaminated clothing before reuse.HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.9. PHYSICAL AND CHEMICAL PROPERTIESTypical values, not to be used for specification purposes.ODOR: No VAPOR PRESSURE: N.D.APPEARANCE: Black VAPOR DENSITY: Heavier than Air PHYSICAL STATE: Viscous liquid LOWER EXPLOSIVE LIMIT: Not ApplicableUPPER EXPLOSIVE LIMIT: Not ApplicableFLASH POINT: ≥ 201 °F, 93 °CSetaflash Closed CupBOILING RANGE: N.A.EVAPORATION RATE: Slower than n-butyl-acetate AUTOIGNITION TEMPERATURE:N.D.DENSITY: 1.63 g/cm3 - 13.58 lb/gal DECOMPOSITION TEMPERATURE:N.D. VISCOSITY, DYNAMIC: N.D.ODOR THRESHOLD: N.D.VISCOSITY, KINEMATIC: N.D.SOLUBILITY IN H2O: Insoluble VOLATILE BY WEIGHT: 0.12 %pH: N.A.VOLATILE BY VOLUME: 0.20 %FREEZE POINT: N.D. VOC CALCULATED: 0.02 lb/gal, 2 g/lN.D.COEFFICIENT OF WATER/OILDISTRIBUTION:LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined10. STABILITY AND REACTIVITYHAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions. STABILITY: Product is stable under normal storage conditions.CONDITIONS TO AVOID: High temperatures.INCOMPATIBILITY: Amines, acids, water, hydroxyl, or active hydrogen compounds.HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, aldehydes11. TOXICOLOGICAL INFORMATIONEXPOSURE PATH: Refer to section 2 of this SDS.SYMPTOMS:Refer to section 2 of this SDS.TOXICITY MEASURES:Chemical Name LD50/LC50Epoxy resin Oral LD50: Rat11,400 mg/kgAlkyl (C12-14)glycidyl ether Oral LD50: Rat17,100 mg/kgEpoxy novolac resin N.D.Crystalline silica Oral LD50: Rat500 mg/kgCarbon black Oral LD50: Rat> 15,400 mg/kgDermal LD50: Rabbit> 3 g/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/lGerm cell mutagenicity: No classification proposedCarcinogenicity: No classification proposedReproductive toxicity: No classification proposed12. ECOLOGICAL INFORMATIONECOTOXICITY:Chemical Name EcotoxicityEpoxy resin N.D.Alkyl (C12-14)glycidyl ether N.D.Epoxy novolac resin N.D.Crystalline silica N.D.Carbon black N.D.PERSISTENCE AND DEGRADABILITY:Not determined for this product.BIOACCUMULATIVE: Not determined for this product.MOBILITY IN SOIL: Not determined for this product.OTHER ADVERSE EFFECTS: Not determined for this product.13. DISPOSAL CONSIDERATIONSDISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and disposal facility.14. TRANSPORT INFORMATIONUS DOT RoadDOT Proper Shipping Name: Environmentally hazardous substances, liquid, n.o.s.DOT Hazard Class: 9SECONDARY HAZARD: NoneDOT UN/NA Number: 3082Packing Group: IIIEmergency Response Guide Number: 171For US DOT non-bulk road shipments this material may be classified as NOT REGULATED. For the most accurate shipping information, refer to your transportation/compliance department regarding changes inpackage size, mode of shipment or other regulatory descriptors.IATA CargoPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.DOT Hazard Class: 9HAZARD CLASS: NoneUN-NUMBER: 3082PACKING GROUP: IIIEMS: 9LIMDGPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.DOT Hazard Class: 9HAZARD CLASS: NoneUN-NUMBER: 3082PACKING GROUP: IIIEMS: F-AThe listed transportation classification applies to IATA Cargo and IMDG non-bulk shipments. It does not address regulatory variations due to changes in package size, mode of shipment or other regulatory descriptors for your country or particular locality. For the most accurate shipping information, refer to your transportation/compliance department.15. REGULATORY INFORMATIONU.S. FEDERAL REGULATIONS: AS FOLLOWS:SARA SECTION 313This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372.:NONETOXIC SUBSTANCES CONTROL ACT:INVENTORY STATUSThe chemical substances in this product are on the TSCA Section 8 Inventory.EXPORT NOTIFICATIONThis product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States:NONE16. OTHER INFORMATIONUnder HazCom 2012 it is optional to continue using the HMIS rating system. It is important to ensure employees have been trained to recognize the different numeric ratings associated with the HazCom 2012 and HMIS schemes.HMIS RATINGS - HEALTH: 2* FLAMMABILITY: 1 PHYSICAL HAZARD: 0* - Indicates a chronic hazard; see Section 2Revision: Section 2, Section 11Effective Date: 06/21/2016DISCLAIMERThe information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.。

SAEJ2044 SEP 2002

汽车工程师学会技术标准委员会的规定：搣本报告由汽车工程师学会发表，旨在推动技术与工程科学的发展。

本报告的应用是完全自愿的，使用者应对本报告任何特定用途的适用性及适合性（包括因本报告产生的任何侵犯专利权的行为）承担全部责任。

汽车工程师学会至少每五年对所有技术报告实施一次审查，并有可能在此时重新确认、修订或撤销技术报告。

汽车工程师学会欢迎您提出书面的意见及建议。

未经汽车工程师学会的书面许可，不得复制、在检索系统中保存或以任何形式或通过任何方式（包括电子、机械、影印、录制或其它方式）传输本出版物的任何内容。

如需订购资料，请联系：电话：877-606-7323（美国与加拿大境内）电话：724-776-4970（美国境外）传真：724-776-0790电邮：custsvc@汽车工程师学会网址：水陆交通工具车辆建议惯例 J2044 修订标号 2002年9月发布日期：1992-06 修订日期：2002-09 代替 J2044 1997年12月液体燃料和蒸汽/排放物系统快连接头规范目录1.范围 ............................................................................................................................................................... 4 2.参考文献 ....................................................................................................................................................... 4 2.1 适用出版物 (4)2.1.1 SAE （汽车工程师学会）出版物 (4)2.1.2 ASTM 出版物 (4)2.2 相关出版物 (4)2.2.1 SAE （汽车工程师学会）的出版物 ............................................................................................................ 53.定义 ............................................................................................................................................................... 5 4.尺寸的名称 ................................................................................................................................................... 5 5.试验温度 ....................................................................................................................................................... 5 6.功能要求 ....................................................................................................................................................... 6 6.1 泄漏测试 . (6)6.1.1 测试程序（低压） (6)6.1.2 验收标准（低压） (6)6.1.3 测试程序（高压） (6)6.1.4 验收标准（高压） (8)6.1.5 测试程序（真空） (8)6.1.6 验收标准（真空） (8)6.2 组装施力 (8)6.2.1 测试程序（新部件） (8)6.2.2 测试程序 (9)6.2.3 验收标准 (9)6.3 拉离的施力 (9)6.3.1 测试程序 (10)6.3.2 验收标准 (10)6.4 侧向载荷能力 (10)6.4.1 测试程序 (11)6.4.2 验收标准（侧向负载泄漏试验） (11)6.4.3 试验要求（侧向负载断裂试验） (11)6.4.4 验收标准 (11)6.5 防蒸发排放 (12)6.5.1 测试程序 (12)6.5.2 验收标准 (12)6.6 电阻 (12)6.6.1 测试程序 (12)6.6.2 验收标准 (13)7. 设计验证/验证测试 (13)7.1 腐蚀 (13)7.1.1 测试程序 (13)7.1.2 验收标准 (13)7.2 氯化锌耐受性 (13)7.2.1 测试程序 (13)7.2.2 验收标准 (13)7.3 外部化学和环境耐受性 (14)7.3.1 测试程序 (14)7.3.2 流体或介质 (14)7.3.3 验收标准 (14)7.4 燃料的兼容性 (14)7.4.1 测试程序 (14)7.4.2 测试燃料 (15)7.4.3 试验要求 (15)7.4.4 验收标准 (15)7.5 寿命周期 (15)7.5.1 测试程序 (15)7.5.2 振动频率 (15)7.5.3 加速度 (15)7.5.4 振动的持续时间 (16)7.5.5 流体压力 (16)7.5.6 流体流量（只对液体燃料的快速连接接头） (16)7.5.7 试验持续时间 (16)7.5.8 试验周期 (16)7.5.9 验收标准 (17)7.6 流量限制 (19)7.6.1 测试程序 (19)7.6.2 验收标准 (19)7.7 高温爆裂 (19)7.7.1 测试程序 (19)7.7.2 验收标准 (19)8. 设计检查/验证和进程内测试矩阵 (19)9. 注 (20)9.1 边栏符号 (20)附录A 匹配管端模板举例 (21)1. 范围本SAE（汽车工程师学会）推荐惯例定义标准的插入式管端尺寸，以保证所有相同尺寸和标准管端连接器设计之间的互换性。

霍尼韦尔Honeywell传感器

霍尼韦尔Honeywell传感器广州南创蔡工霍尼韦尔Honeywell传感器是一家财富100强公司发明和生产技术，以解决与全球宏观趋势，如安全性，安全性和能源的严峻挑战。

霍尼韦尔Honeywell传感器全球约132,000名员工，其中包括超过19,000名工程师和科学家，霍尼韦尔Honeywell传感器的产品在多个国家设立了国外办事处及售后服务中心，并在中国设立了广州南创传感事业部，为美国Honeywell 流量传感器提供最佳的服务与解决方案。

有质量，交货，价值，和霍尼韦尔Honeywell传感器做的一切技术的不懈重点。

霍尼韦尔Honeywell传感器的能力不断提高，来自成功实现两个看似竞争的一次任务- 生产力和经济增长。

美国Honeywell流量传感器公司的核心内部业务流程，传动效率和服务质量。

促成带来世界一流的产品和服务更快地推向市场和更具成本效益航天霍尼韦尔Honeywell传感器的航空航天产品和服务用于全球几乎所有的商业和商务飞机经营的今天，以及国防和空间应用。

霍尼韦尔Honeywell传感器提供综合航空电子系统，发动机，系统和服务解决方案，认真听取霍尼韦尔Honeywell传感器的客户和重点放在最能满足他们的需求，使飞行更安全，更可靠，更高效，更具成本效益的技术。

自动化和控制解决方案霍尼韦尔Honeywell传感器的环境控制，生命安全，安全，遥感，扫描，移动产品，以及建筑和工艺解决方案是在工作中，在150万个家庭，10万座建筑物，5000工业设施，以及数以百计的全球天然气和电力公用事业。

霍尼韦尔Honeywell传感器的产品和解决方案，使客户能够捕获更多和更好的数据，更快的速度和整个无线景观，提高生产率，安全性和安全性，推动更好的决策，并降低了成本。

高性能材料和技术以开发和制造先进的材料和工艺技术，是人每天使用，以减少温室气体排放，阻止子弹，使生产的绿色燃料，增加炼油能力，加速药物发现，和保护药品的全球领先地位。

BI850 聚丙烯嵌段共聚物 SDS.pdf说明书

发行日期: 2017-04-17○ 泄漏，火灾或事故- 不适用○ 象形图○ 警示词○ 危险说明○ 防范说明1) 预防措施2) 事故响应3) 安全储存4) 废弃处置○ NFPA 等级 (0 ~ 4 阶段)化学品安全技术说明书 (SDS)聚丙烯嵌段共聚物 BI850Revision date: 不适用Version: R0001.00011.• 产品名称• 制造商/供应商/流通商品信息- 制造商/供应商: 韩华道达尔有限公司- 地址: 31900 忠南瑞山市大山邑獨串２路 103- 电话: 82-41-660-6190- 聚丙烯嵌段共聚物 BI850• 产品用途及使用限制- 用途: 大型家电部件，PP 改性料基材树脂（汽车，家电），薄壁注塑容器，日用品- 使用限制: 无资料- 负责人:- 应急咨询电话: 86-21-3209-7017, (传真)89-136-2198-1528- 地址: 中國上海市長寧區紅寶石路 500號東銀中心 B 棟 903（201103）- 紧急联系电话: 82-41-660-6190- 传真: 82-41-660-6189• 化学事故应急咨询电话- 中国境内法人的公司名称: 韩华道达尔化工贸易（上海）有限公司- 不适用- 不适用- 不适用- 不适用• 准范围之外的其他有害性、危险性- 卫生 : 0, 火灾 : 0, 反应 : 02.• GHS 分类• 预防措施及警告标识- 不适用- 不适用- 不适用3.4. 急救措施• 眼睛接触- 不要揉眼睛。

- 在与熔融产品接触的情况下，立即用自来水冲洗至少20分钟。

• 皮肤接触- 在与熔融产品接触的情况下，立即用自来水冲洗至少20分钟。

- 被污染的衣物和鞋子再次使用前一定要彻底清洗。

• 吸入- 暴露在大量的蒸汽或烟雾中时，立即转移到空气新鲜处。

- 根据需要采取相应的措施。

• 食入- 是否要催吐，请向医生咨询。

- 立即用水漱口。

219522850_双螺杆挤出工艺对聚碳酸酯类光学材料的光学特性及颜色的影响研究

作者简介：孟明，男，硕士，工程师，主要从事改性塑料加工工艺的研究。

收稿日期：2023-05-22聚碳酸酯，简称PC ，是一种无定形的热塑性塑料，根据酯基的不同一般可分为脂肪族、芳香族、脂肪-芳香族三大类。

由于主链由柔性的碳酸酯链与刚性的苯环相连接，使之具有许多优良的工程性能。

PC 分子链的高钢性和大的空间位阻使其具有较高的熔体黏度，进而致使其加工难度较大[1]。

醚键及异丙基则在聚碳酸酯链段中扮演着增加整体链段柔性的角色，使得聚碳酸酯能够被加工应用。

聚碳酸酯有很好的光透过性，尺寸稳定性高，无毒无刺激。

因而聚碳酸酯是制作光盘的基础材料，同时还可以广泛应用于眼镜、摄影镜头、汽车挡风玻璃、光学透镜等领域。

1　实验部分1.1　原料及配方组成如表1，对应产品牌号为JH894620 C8ATAB -TGS9400。

表1　实验用原材料及配方组成组成重量/kg 比例/%PC A220068~88 68~88 PC ST4-3022 PJ （3）12~3212~32色粉1份1份助剂 1份1份1.2　主要实验仪器及设备啮合同向双螺杆挤出机：65D 、40:1、600RPM ，双螺杆挤出工艺对聚碳酸酯类光学材料的光学特性及颜色的影响研究孟明，肖志刚，侯林木，张晓翔(天津金发新材料有限公司，天津 300300)摘要：研究了双螺杆挤出机的螺杆剪切强度、剪切速率、加工温度对聚碳酸酯材料的透光性和颜色的影响。

结果表明，剪切强度关系到剪切热的产生量，强的组合更容易导致PC 材料的降解和透光性的降低。

在相对弱的剪切强度下，加工温度影响着材料加工流动性，流动性增大，PC 透光率增大，材料颜色（B 值）降低。

65D 双螺杆挤出机使用较弱的螺杆组合，在240~250 ℃左右的加工温度下，按照350KG/H 、450RPM 挤出聚碳酸酯类光学材料性能最佳（B 值可达到-1.40 550 mm 波长的透光率高于10 850 mm 波长的透光率高于32）。

N8.5气相色谱仪

色谱分析过程示意图
3. 色谱图及其主要参数
由记录仪得到的色谱图又称流出曲线。它是被分析样品在载气的带动下经过色谱柱分离后进入检测器得到的信号图形，是进行成分定性分析和定量分析的依据。
色谱图主要参数
（1）基线（2）保留时间（3）保留体积（4）区域宽度和分离度
（1）基线
基线：色谱仪启动后，只有载气通过而没有样气注入时所记录的曲线。基线一般不取零值，仪器性能稳定时，它应当是平行于时间轴的直线。
当用固定液时，需要把它涂在称为担体的固定材料上，担体的作用是使固定液牢固地分布在上面。
5. 检测器鉴定器
仪器的关键部件，经过色谱柱分离的组分用检测器把它们转化为电信号进行定性和定量分析。
检测器分为浓度型和质量型两大类。
浓度型检测器的响应取决于载气和组分在混合物中组分的质量浓度，即输出正比于质量浓度，如热导检测器。
优点：
操作简单，使用方便，分析的准确度主要取决于进样量的重复性和操作条件的稳定性。
8.5 气相色谱仪
8.5.1 色谱分析方法的由来 8.5.2 气相色谱法的分离原理 8.5.3 定性分析和定量分析 8.5.4 工业气相色谱仪的基本组成 8.5.5 气相色谱仪的新发展
8.5.4 工业气相色谱仪的基本组成
在一定操对测量中可用此方法。此方法方便，保留值也容易测准确，适用于工厂分析。
④ 自动积分仪法
配备电子自动积分仪，直接测出色谱峰面积，精确度达到0.2%～2%，但测量小峰时误差较大。
（3）定量校正因子
式（8.5.7）中的fsi不仅因不同组分而异，而且还取决于检测器的灵敏度及某些操作条件，给实际应用带来困难，所以在定量分析中都使用相对校正因子。

CHO-MUTE 9005和9025电磁干扰抵抗材料说明说明书

CHO-MUTE 9005 and 9025 elastomer based absorber materials are designed to offer a user friendly approach to the reduction of unwanted electromagnetic radiation from electronic equipment as well as minimize cavity to cavity cross coupling, and microwave cavity resonances. Comprised of a silicone elastomer matrix with ferrous filler material, these materials provide RF absorption performance over a broadband frequency range from 500 MHz to 18 GHz. The materials are offered as sheet stock of various thicknesses with or without pressure sensitive adhesive. They are flexible, and can be easily die-cut for use in empirical testing of absorption solutions. Since both materials have been tested and certified to the UL 94 V-0 flammability standard, they may be used in close quarters with electronic circuitry to reduce unwanted electromagnetic radiation by absorption of signals and reduction of reflections from metallic surfaces. A wide variety of fabricating techniques are available for custom part manufacturing.CHO-MUTE™ 9005 and 9025Microwave Absorber Materials UL 94 V-0 Flammability RatedCustomer ValueProposition:Contact Information:Parker Hannifin Corporation Chomerics Division 77 Dragon Court Woburn, MA 01801 phone 781 935 4850fax 781 933 4318********************* www.parker .com/chomerics Product Features:• Microwave absorption material covering a wide range of frequencies • Up to 20 dB RF absorption • Available in six standard thicknesses • Flexible • RoHS Compliant • Global product availability • UL 94V-0 certified Typical Applications:• Hand held electronics • Wireless voice or data telecommunication • Military electronics • GPS • Ruggedized computers • Night vision equipment • Telecommunication infrastructure equipmentCHO-MUTE - Product Information Custom part numbers available upon request.CHO-MUTE Thickness, inch (mm) T 7 0.010±.004 (0.25±.10) 1 0.020±.004 (0.51±.10) 2 0.032±.005 (0.81±.13) 3 0.062±.007 (1.57±.18) 4 0.093±.010 (2.36±.25) 5 0.125±.010 (3.18±.25)Adhesive (PSA) A 0 No Adhesive Ba cking 1 Adhesive Backing No adhesive is available on .010 (.25) thick she ets Sheet Size 10” X 20”(25.4cm X 50.8cm)0525CHOMERICS is a registered trademark of Parker Hannifin Corporation. ® /chomericsTB 1040 EN April 2021Ordering Information46TA 102090XX。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Representative photograph, actual product appearance may vary.
Due to regional agency approval requirements, some products may not be available in your area. Please contact your regional Honeywell office regarding your product of choice. SEP8505-002
SEP Series GaAs Infrared Emitting Diode, T-1 Package Features
q T-1 package
q15 ° (nominal) beam angle
q935 nm wavelength
q Consistent on-axis optical properties
q Mechanically and spectrally matched to SDP8405
phototransistor and SDP8105 photodarlington
Description
The SEP8505 is a gallium arsenide infrared emitting diode transfer molded in a T-1 red plastic package. Transfer molding of this device assures superior optical centerline performance compared to other molding processes. Lead lengths are staggered to provide a simple
method of polarity identification.
SEP8505-002
SEP Series GaAs Infrared Emitting Diode, T-1 Package
Product Specifications
Product Type IR Component
Power Output 1.0 - 4.0 mW/cm² maximum Beam Angle (Degree)15
Package Style T1
Package Components Plastic
Forward Current20 mA
Continuous Forward Current50 mA
Forward Voltage 1.5 V
Reverse Breakdown Voltage 3 V
Output Wavelength935 nm
Spectral Bandwidth50 nm
Spectral Shift With Temperature0.3 nm/°C
Rise and Fall Time0.7 µs
Power Dissipation70 mW
Operating Temperature Range-55 °C to 125 °C [-67 °F to 257 °F] Availability Global
Product Name Infrared Emitting Diode
SEP8505-002
SEP Series GaAs Infrared Emitting Diode, T-1 Package
SEP8505-002
SEP Series GaAs Infrared Emitting Diode, T-1 Package
SEP8505-002
SEP Series GaAs Infrared Emitting Diode, T-1 Package
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury.
Failure to comply with these instructions could result in death or serious injury.
MISUSE OF DOCUMENTATION
q The information presented in this product sheet (or catalog) is for reference only.
DO NOT USE this document as product installation information.
q Complete installation, operation and maintenance information is provided in the
instructions supplied with each product.
Failure to comply with these instructions could result in death or serious injury.© Copyright Honeywell Inc.1998-2004 All rights reserved.。