1825190中文资料

合集下载

1952801资料

Extract from the onlinecatalogMCDNV 1,5/ 4-G1-3,5 P26THROrder No.: 1952801The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1952801Headers, 3.5 mm pitch, pin length 2.6 mm, plug-in direction vertical to the PCBhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsLength16 mmHeight13.3 mmPitch 3.5 mmDimension a10.5 mmNumber of positions4Pin dimensions0,8 x 0,8 mm Pin spacing 3.5 mmHole diameter 1.3 mmTechnical dataInsulating material group IIIaRated surge voltage (III/3) 2.5 kVRated surge voltage (III/2) 2.5 kVRated surge voltage (II/2) 2.5 kVRated voltage (III/2)200 VRated voltage (II/2)250 V Connection in acc. with standard EN-VDE Nominal current I N8 ANominal voltage U N160 V Maximum load current8 A (per position) Insulating material LCP Inflammability class acc. to UL 94V0Certificates / ApprovalsApproval logoCULNominal voltage U N150 VNominal current I N8 AULNominal voltage U N150 VNominal current I N8 A Certification CUL, ULAccessoriesItem Designation DescriptionMarking0805030SK 3,5/2,8:SO Marker card, special printing, self-adhesive, labeled acc. tocustomer requirements, 14 identical marker strips per card, max.25-position labeling per strip, color: White0804109SK 3,81/2,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 10-section markerstrip, 14 identical decades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for 140 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating materialDrawingsDrilling diagramDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1911910资料

Extract from the onlinecatalogMSTB 2,5 HC/ 4-ST-5,08Order No.: 1911981The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1911981COMBICON HC plug components, 5.08 mm pitch, color: green, no. of positions 4, dimension a 15.24 mmhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5 mmDimension a35 mmNumber of positions8Screw thread M 3Tightening torque, min0.5 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kVRated surge voltage (III/2) 4 kVRated surge voltage (II/2) 4 kVRated voltage (III/2)320 VRated voltage (II/2)630 VConnection in acc. with standard EN-VDENominal current I N16 A (see derating curve) Nominal voltage U N250 VNominal cross section 2.5 mm2Maximum load current16 AInsulating material PAInflammability class acc. to UL 94V0Internal cylindrical gage A3Stripping length7 mmConnection dataConductor cross section solid min.0.2 mm2Conductor cross section solid max. 2.5 mm2Conductor cross section stranded min.0.2 mm2Conductor cross section stranded max. 2.5 mm2Conductor cross section stranded, with ferrule0.25 mm2without plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm2with plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2with plastic sleeve max.Conductor cross section AWG/kcmil min.24Conductor cross section AWG/kcmil max122 conductors with same cross section, solid min.0.2 mm22 conductors with same cross section, solid max. 1 mm22 conductors with same cross section, stranded0.2 mm2min.2 conductors with same cross section, stranded max.1.5 mm22 conductors with same cross section, stranded,ferrules without plastic sleeve, min.0.25 mm 22 conductors with same cross section, stranded,ferrules without plastic sleeve, max.1 mm22 conductors with same cross section, stranded,TWIN ferrules with plastic sleeve, min.0.5 mm 22 conductors with same cross section, stranded,TWIN ferrules with plastic sleeve, max. 1.5 mm2Certificates / ApprovalsApproval logoCULNominal voltage U N 300 V Nominal current I N 10 A AWG/kcmil 30-12ULNominal voltage U N 300 V Nominal current I N 10 A AWG/kcmil 30-12Certification CB, CUL, GOST, UL, VDE-PZIAccessories Item Designation DescriptionGeneral 1733169EBP 2- 5Insertion bridge, fully insulated, for plug connectors with 5.0 or 5.08 mm pitch, no. of positions: 21803934KGG-MSTB 2,5/ 2Cable housing, for cable diameters of 4 - 6 mm, clamp and marker strips are included, color: green, no. of positions: 21783779KGS-MSTB 2,5/ 8Cable housing, for cable diameters of 6 - 13.5 mm, marker strips and transparent label carrier are included, color: green, no. of positions: 8Marking 0804183SK 5/3,8:FORTL.ZAHLENMarker card, printed horizontally, self-adhesive, 12 identical decades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for 120 terminal blocksPlug/Adapter 1734634CP-MSTBCoding profile, is inserted into the slot on the plug or inverted header, red insulating materialTools 1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDE approvalAdditional products Item DesignationDescriptionGeneral 1923814MSTBA 2,5 HC/ 8-G COMBICON HC headers, 5.0 mm pitch, color: green, no. of positions 8, dimension a 35 mm1924253MSTBVA 2,5 HC/ 8-GCOMBICON HC headers, 5.0 mm pitch, color: green, no. of positions 8, dimension a 35 mmDrawings DiagramDerating curve for: MSTB 2,5 HC/..-ST with MSTBA 2,5 HC/..-G Derating curve for: MSTB 2,5 HC/..-ST with MSTBVA 2,5 HC/..-GDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1869198资料

Extract from the onlinecatalogSMKDSN 1,5/15Order No.: 1869198The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1869198Printed circuit terminal block, nominal current: 13.5 A, rated voltage: 250 V, pitch: 5.0 mm, no. of positions: 15, mounting: Soldering, type of connection: Screw connection, connection direction from the conductor to the PCB: 55°http://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5 mmDimension a70 mmNumber of positions15Pin dimensions0,5 x 1 mm Hole diameter 1.3 mm Screw thread M 3 Tightening torque, min0.5 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/2)320 V Rated voltage (II/2)630 V Connection in acc. with standard EN-VDE Nominal current I N13.5 A Nominal voltage U N250 V Nominal cross section 1.5 mm2 Maximum load current13.5 A Insulating material PA Inflammability class acc. to UL 94V0 Internal cylindrical gage A1 Stripping length 6 mmConnection dataConductor cross section solid min.0.14 mm2 Conductor cross section solid max. 1.5 mm2 Conductor cross section stranded min.0.14 mm2 Conductor cross section stranded max. 1.5 mm2 Conductor cross section stranded, with ferrule0.25 mm2 without plastic sleeve min.Conductor cross section stranded, with ferrule1.5 mm2 without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm2 with plastic sleeve min.Conductor cross section stranded, with ferrule1.5 mm2 with plastic sleeve max.Conductor cross section AWG/kcmil min.26 Conductor cross section AWG/kcmil max162 conductors with same cross section, solid min.0.14 mm22 conductors with same cross section, solid max.0.75 mm22 conductors with same cross section, stranded0.14 mm2min.2 conductors with same cross section, stranded0.75 mm2max.2 conductors with same cross section, stranded,0.25 mm2ferrules without plastic sleeve, min.2 conductors with same cross section, stranded,0.5 mm2ferrules without plastic sleeve, max.2 conductors with same cross section, stranded,0.5 mm2TWIN ferrules with plastic sleeve, min.2 conductors with same cross section, stranded,1 mm2TWIN ferrules with plastic sleeve, max.Certificates / ApprovalsApproval logoCSANominal voltage U N300 VNominal current I N10 AAWG/kcmil28-14CULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-14ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-14Certification CB, CCA, CSA, CUL, GOST, SEV, ULAccessoriesItem Designation DescriptionMarking0804183SK 5/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocksDrawingsDrilling diagramDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

280109-13中文资料

Document Number: 37017Revision 05-Dec-00 2元器件交易网Document Number: 91000Revision: 18-Jul-081DisclaimerLegal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网。

1N5819中文资料_数据手册_参数

Nhomakorabea 万联芯城
万联芯城-电子元器件采购网，专为终端工厂客户提供一站式电子元器件配套服务，万联芯城所售电子元器件均为原装现货库存，提交 BOM 表立即报价。万联芯城代理长电，顺络，先科 ST 等知名电子元器件品牌，价格有明显的优势，欢迎广大客户咨询相关采购业务。点击进入万联芯城。
肖特基势垒整流器特征 ?保护过压保护 ?非常小的传导损失 ?极快的切换 ?低正向压降 ?高频操作 ?浸焊260°C，40秒 ?符合ROHS 2002/95 / EC的组件和WEEE 2002/96 / EC典型应用为了用于低压高频逆变器，续流，直流 - 直流转换器，和极性保护应用.机械数据案例：DO-204AL（DO-41）环氧符合UL 94V-0易燃性等级端子：哑光镀锡导线，可焊每个 J-STD-002和JESD22-B102 E3后缀为消费级，符合JESD 201级 1A晶须测试极性：色带表示阴极端主要特征我（AV） 1.0 A V RRM 20 V，30 V，40 V 我 FSM 25 A V F 0.45 V，0.55 V，0.60 V T J MAX. 125°C DO-204AL（DO-41）大额定值（除非另有说明， T A = 25°C）参数符号 1N5817 1N5818 1N5819单元大重复峰值反向电压 V RRM 20三十 40 V大RMS电压 V RMS 14 21 28 V大DC阻断电压 V DC 20三十 40 V大非重复峰值反向电压 V RSM 24 36 48 V大平均正向整流电流 T L = 90°C时，引线长度为0.375“（9.5 MM）我（AV） 1.0一个峰值正向浪涌电流，8.3MS单半正弦波叠加在额定负载上我 FSM 25一个电压变化率（额定V R ）的DV / DT 10 000 V /μS的存储温度范围 T J ，T STG - 65到+ 125 C

AGR19180EF-DB中文资料

2Agere Systems Inc.180 W, 1930 MHz —1990 MHz, PCS LDMOS RF Power Transistor April 2004AGR19180EFPreliminary Data SheetElectrical CharacteristicsTable 1. Thermal Characteristics Table 2. Absolute Maximum Ratings **Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.Recommended operating conditions apply unless otherwise specified: T C = 30 °C.Table 3. dc CharacteristicsParameterSymbol Value Unit Thermal Resistance, Junction to Case R θJC0.35°C/WParameterSymbol Value Unit Drain-source Voltage V DSS 65Vdc Gate-source VoltageV GS –0.5, 15Vdc Total Dissipation at T C = 25 °C P D 500W Derate Above 25 °C—3W/°C Operating Junction Temperature T J 200°C Storage Temperature RangeT STG–65, 150°CParameterSymbolMin Typ Max Unit Off CharacteristicsDrain-source Breakdown Voltage (V GS =0,I D =300µA)V (BR)DSS 65——Vdc Gate-source Leakage Current (V GS =5V,V DS =0V)I GSS ——6µAdc Zero Gate Voltage Drain Leakage Current (V DS =28V,V GS =0V)I DSS——18µAdc On CharacteristicsForward Transconductance (V DS =10V, I D =1A)G FS —12—S Gate Threshold Voltage (V DS =10V,I D =600µA)V GS(TH)—— 3.0Vdc Gate Quiescent Voltage (V DS =28V, I D =2x 800mA)V GS(Q)— 3.8—Vdc Drain-source On-voltage (V GS =10V,I D =1A)V DS(ON)—0.08—VdcAgere Systems Inc.3Preliminary Data Sheet AGR19180EFApril 2004180 W, 1930 MHz —1990 MHz, PCS LDMOS RF Power TransistorElectrical Characateristics (continued)Table 4. RF Characteristics*N-CDMA, typical peak/average ratio of 9.72 dB at 0.01% CCDF, f1=1958.75MHz, and f2=1961.25 MHz. V DD =28Vdc,I DQ =2 x 800mA, and P OUT =38W average.ParameterSymbol Min Typ Max Unit Dynamic CharacteristicsReverse Transfer Capacitance(V DS =28V,V GS =0, f =1.0MHz)(Part is internally matched both on input and output.)C RSS—4.0—pFFunctional Tests (in Agere Systems Supplied Test Fixture)Common-source Amplifier Power Gain(V DD =28Vdc, P OUT =38W average, two carrier N-CDMA,I DQ =1600mA, f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5 MHz, f2 = 1990 MHz)G PS—14.5—dBDrain Efficiency(V DD =28Vdc, P OUT =38W average, two carrier N-CDMA,I DQ =1600mA, f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5 MHz,f2 = 1990 MHz)η—26—%Third-order Intermodulation Distortion*(V DD =28Vdc, P OUT =38W average, two carrier N-CDMA,I DQ =1600mA, f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5MHz, f2 = 1990MHz; IM3 measured in a 1.2288 MHz integration bandwidth centered at f1–2.5MHz and f2 + 2.5 MHz, referenced to the carrier chan-nel power)IM3—–33—dBcAdjacent Channel Power Ratio*(V DD =28Vdc, P OUT =38W average, two carrier N-CDMA, I DQ =1600mA, f1 = 1930MHz, f2 = 1932.5MHz and f1 = 1987.5MHz,f2 = 1990MHz; ACPR measured in a 30 kHz integration bandwidth cen-tered at f1 – 885kHz and f2 + 885 kHz, referenced to the carrier channel power)ACPR —–48.5—dBcInput Return Loss(V DD =28Vdc, P OUT =38W average, two carrier N-CDMA,I DQ =1600mA, f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5 MHz, f2 = 1990 MHz)IRL —–12—dBRuggedness(V DD =28V,P OUT =180W continuous wave (CW), I DQ =1600mA,f = 1930 MHz, VSWR = 10:1 [all phase angles])ΨNo degradation in outputpower.AGR19180EF Preliminary Data Sheet 180 W, 1930 MHz—1990 MHz, PCS LDMOS RF Power Transistor April 20044Agere Systems Inc.Agere Systems Inc.5Preliminary Data Sheet AGR19180EFApril 2004180 W, 1930 MHz —1990 MHz, PCS LDMOS RF Power TransistorTypical Performance CharacteristicsZ S = Test circuit impedance as measured from gate to gate, balanced configuration.Z L = Test circuit impedance as measured from drain to drain, balanced configuration.Figure 3. Series Equivalent Input and Output ImpedancesMHz (f)Z S Ω(Complex Source Impedance )Z L Ω(Complex Optimum Load Impedance)1930 (f1) 2.58 – j5.9 3.2 – j4.671960 (f2) 2.36 – j5.26 2.85 – j3.861990 (f3) 2.37 – j4.51 2.72 – j3.070.10.10.10.20.20.30.30.40.40.50.50.60.60.70.70.80.80.90.91.01.01.21.21.41.41.61.61.81.82.2.03.3.04.04.05.05.01010102020205050500.20.20.20.40.40.40.60.60.60.80.80.81.1.-20-30-40-50-60-70-80-90-100-110-120-130-140-150-160170-170180±90-90-85-80-75-70-65-60-55-50-45-40-35-30-25-20-15-100.040.050.060.070.080.090.10.110.120.130.140.150.160.170.180.190.20.210.220.230.230.240.240.250.250.260.260.270.270.280.290.30.310.320.330.340.350.360.370.380.390.40.410.420.430.440.450.460.470.480.480.490.490.00.0A N GL E O F T R A N S M I S S I O N C O E F F I C I E N T I N D E G R E E S A N G L E O F R E F L E C T I O N C O E F F I C I E N T I N D E G R E E S Ð> W A V E L E N G T HS T O W AR D<ÐW AVE L EN G T H S T O W A R D L O A D <ÐI N DU C TC A P AC I T I V E R E A C T A NC E C O MP O NE NT (-X /Z o), O RI N D UC TI VE SU S C E P T A N C E (-j B /Y o )RESISTANCE COMPONENT (R/Zo), OR CONDUCTANCE COMPONENT (G/Yo)Z Lf3f1Z Sf3f1Z 0 = 10 ΩDUT INPUT MATCH OUTPUT MATCH–+Z SZ L+–DRAIN (1)SOURCE (3)GATE (2)AGR19180EF Preliminary Data Sheet 180 W, 1930 MHz—1990 MHz, PCS LDMOS RF Power Transistor April 20046Agere Systems Inc.Preliminary Data Sheet AGR19180EF April 2004180 W, 1930 MHz—1990 MHz, PCS LDMOS RF Power TransistorAgere Systems Inc.7AGR19180EF Preliminary Data Sheet 180 W, 1930 MHz—1990 MHz, PCS LDMOS RF Power Transistor April 20048Agere Systems Inc.Agere Systems Inc.9180 W, 1930 MHz —1990 MHz, PCS LDMOS RF Power Transistor April 2004AGR19180EFPreliminary Data SheetATC is a registered trademark of American Technical Ceramics Corp.Kemet is a registered trademark of KRC Trade Corporation.Vitramon is a registered trademark of Vitramon Incorporated.Sprague is a registered trademark of Sprague Electric Company Corporation.Murata is a registered trademark of Murata Electronics North America, Inc.Johanson and Giga-Trim are registered trademarks of Johanson Manufacturing Corporation.Fair-Rite is a registered trademark of Fair-Rite Products Corporation.Taconic is a registered trademark of Tonoga Limited DBA Taconic Plastics Ltd.Copyright © 2004 Agere Systems Inc.All Rights ReservedApril 2004DS04-162RFPP (Replaces DS04-080RFPP)For additional information, contact your Agere Systems Account Manager or the following:INTERNET: E-MAIL:docmaster@N. AMERICA:Agere Systems Inc., Lehigh Valley Central Campus, Room 10A-301C, 1110 American Parkway NE, Allentown, PA 18109-91381-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106)ASIA:Agere Systems Hong Kong Ltd., Suites 3201 & 3210-12, 32/F, Tower 2, The Gateway, Harbour City, KowloonTel. (852) 3129-2000, FAX (852) 3129-2020CHINA: (86) 21-54614688 (Shanghai), (86) 755-25881122 (Shenzhen)JAPAN: (81) 3-5421-1600 (Tokyo), KOREA: (82) 2-767-1850 (Seoul), SINGAPORE: (65) 6778-8833, TAIWAN: (886) 2-2725-5858 (Taipei)EUROPE:Tel. (44) 1344 296 400Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. Agere is a registered trademark of Agere Systems Inc. Agere Systems and the Agere logo are trademarks of Agere Systems Inc.RF Power Product InformationFor product and application information, please visit our website: /rfpower .。

1911208中文资料

Extract from the onlinecatalogEMCV 1,5/ 5-GF-3,5Order No.: 1911198The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1911198Header, nominal current: 8 A, rated voltage: 160 V, pitch: 3.5 mm, no. of positions: 5, mounting: press inhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 3.5 mmDimension a17.5 mmNumber of positions6Pin dimensions0,8 x 0,8 mmHole diameter 1.45 mmTechnical dataInsulating material group IIIaRated surge voltage (III/3) 2.5 kVRated surge voltage (III/2) 2.5 kVRated surge voltage (II/2) 2.5 kVRated voltage (III/2)160 VRated voltage (II/2)250 VConnection in acc. with standard EN-VDENominal current I N8 ANominal voltage U N160 VMaximum load current8 AInsulating material PBTInflammability class acc. to UL 94V0Certificates / ApprovalsApproval logoCULNominal voltage U N300 VNominal current I N8 AULNominal voltage U N300 VNominal current I N8 ACertification CUL, GOST, ULAccessoriesItem Designation DescriptionAssembly1877258EMC 1,5-SH Stamp holder, for upper and lower stamp1877274EMCV 1,5-SS 1Stamp set, consisting of upper and lower stamp for 3.81 mm pitch,2 to 16-pos.Marking0804073SK 3,5/2,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 10-section markerstrip, 14 identical decades marked 1-10, 11-20 etc. up to 91-100,sufficient for 140 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating materialAdditional productsItem Designation DescriptionGeneral1847097MC 1,5/ 6-STF-3,5Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.5 mm, no. of positions: 6, type of connection: Screw connection 1863343MCVR 1,5/ 6-STF-3,5Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.5 mm, no. of positions: 6, type of connection: Screw connection 1863042MCVW 1,5/ 6-STF-3,5Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.5 mm, no. of positions: 6, type of connection: Screw connection DrawingsDrilling diagramDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1830596中文资料

Extract from the onlinecatalogMCV 1,5/ 2-GF-3,81Order No.: 1830596The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1830596Header, nominal current: 8 A, rated voltage: 160 V, pitch: 3.81 mm, no. of positions: 2, mounting: Solderinghttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 3.81 mmNumber of positions2Pin dimensions0,8 x 0,8 mmHole diameter 1.2 mmTechnical dataInsulating material group IIIaRated surge voltage (III/3) 2.5 kVRated surge voltage (III/2) 2.5 kVRated surge voltage (II/2) 2.5 kVRated voltage (III/2)160 VRated voltage (II/2)250 VConnection in acc. with standard EN-VDENominal current I N8 ANominal voltage U N160 VMaximum load current8 AInsulating material PBTInflammability class acc. to UL 94V0Certificates / ApprovalsApproval logoCSANominal voltage U N300 VNominal current I N8 ACULNominal voltage U N300 VNominal current I N8 AULNominal voltage U N300 VNominal current I N8 ACertification CB, CSA, CUL, GOST, UL, VDE-PZIAccessoriesItem Designation DescriptionMarking0804109SK 3,81/2,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 10-sectionmarker strip, 14 identical decades marked 1-10, 11-20 etc. up to91-(99)100, sufficient for 140 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating materialAdditional productsItem Designation DescriptionGeneral1851232FK-MCP 1,5/ 2-STF-3,81Plug, with screw flange, nominal current: 8 A, rated voltage:160 V, pitch: 3.81 mm, no. of positions: 2, type of connection:Spring-cage connection1850851FRONT-MC 1,5/ 2-STF-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 2, type of connection: Screw connection 1827703MC 1,5/ 2-STF-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 2, type of connection: Screw connection 1852367MCC 1/ 2-STZF-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 2, type of connection: Crimp connection 1828346MCVR 1,5/ 2-STF-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 2, type of connection: Screw connection 1828498MCVW 1,5/ 2-STF-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 2, type of connection: Screw connection 1897542QC 0,5/ 2-STF-3,81Plug, nominal current: 6 A, rated voltage: 320 V, pitch: 3.81mm, number of positions: 2, connection method: Insulationdisplacement connection QUICKONDrawingsDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

考研集料

070102 计算数学 01 小波分析及其应用 070104 应用数学 01 组合设计与编码 02 量子信息与量子计算 03 动力系统 04 离散与组合几何 006 物理科学与信息工程学院 80787311) (80787311) 070201 理论物理 01 非线性物理 02 高能碰撞物理 03 介观物理中输运理论 04 低维物理理论 070205 凝聚态物理 01 半导体超晶格物理 02 材料微结构与磁性 03 材料模拟与设计 04 光纤激光技术与现代光通信 05 新型薄膜材料 007 007 资源与环境科学学院 (80787609) 070501 自然地理学 01 土地覆被变化与土地评价
002体育学院80787711040303体育教育训练学01运动技能理论与实践02健身理论与肥胖相关疾病的运动防治03运动损伤与功能恢复04体育教育教学理论与实践1001英语2002运动生理学3007运动技能理论1001英语2002运动生理学3008运动健身理论1001英语2002运动生理学3009体育保健理论1001英语2002运动生理学3010体育教育理论003文学学院80788309050101文艺学01文艺美学邢建昌1001英语或1004德语2003外文论3011文学理论与评论写作050103汉语言文字学01汉语文字学02汉语词汇学1001英语2004汉语言文字学综合卷3012汉语文字学1001英语2004汉语言文字学综合卷3013汉语词汇学050105中国古代文学01先秦两汉文学研究02唐宋文学03中国古代小说研究1001英语或1002俄语或1003语2005文史综合3014先秦两汉文学1001英语或1002俄语或1003语2005文史综合3015唐宋文学1001英语或1002俄语或1003语2005文史综合3016中国小说050106中国现当代文学01现代诗学研究1001英语或1002俄语或1003语2006中国现当代文学及文论3017现代诗学004历史文化学院80788408060100考古学01古代建筑02环境考古张立方1001英语2007考古学3018中国古代建筑史1001英语2007考古学3019环境考古学060200中国史01中国古代社会经济史02出土文献与隋唐史03中国近现代国防史外交史04中国近现代经济史05中国近现代文化史1001英语2008中国古代史3020中国古代社会经济史1001英语2008中国古代史3021出土文献与隋唐史1001英语2009中国近现代史3022中国近现代国防史1001英语2009中国近现代史3023中国近现代经济史1001英语2009中国近现代史3024中国近现代文化史005数学与信息科学学院80787209070101基础数学01近现代数学史02拓扑学03代数组合04复分析clifford分析05调和分析1001英语2010专业综合3025近现代数学史或3026微分周期映射或3027结合方案与距离正3028典型群的几何学或3029clifford分析或3030调和分不招收同等学力考生302530263027302830293030任选一

1876194资料

元器件交易网
Extract from the online catalog
GIC 2,5/ 6-ST-7,62 AU
Order No.: 1876194
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1876194
PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.de
Page 3 / 3 Mar 5, 2008
Nominal current IN AWG/kcmil UL Nominal voltage UN Nominal current IN AWG/kcmil Certification
10 A 30-12
300 V 10 A 30-12 CB, CSA, CUL, UL, VDE-PZI
PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.de
Page 1 / 3 Mar 5, 2008
元器件交易网
GIC 2,5/ 6-ST-7,62 AU Order No.: 1876194
http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1876194
Product notes Commercial data EAN Pack Customs tariff Weight/Piece 4017918267957 50 Pcs. 85366990 0.01249 KG http:// Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use aptificates / Approvals WEEE/RoHS-compliant since: 01/01/2003

1830499中文资料

Extract from the onlinecatalogMCDV 1,5/11-G-3,81Order No.: 1830499The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1830499Header, nominal current: 8 A, rated voltage: 160 V, pitch: 3.81 mm, no. of positions: 11, mounting: Solderinghttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 3.81 mmDimension a38.1 mmNumber of positions11Pin dimensions0,8 x 0,8 mmHole diameter 1.2 mmTechnical dataInsulating material group IIIaRated surge voltage (III/3) 2.5 kVRated surge voltage (III/2) 2.5 kVRated surge voltage (II/2) 2.5 kVRated voltage (III/2)160 VRated voltage (II/2)250 VConnection in acc. with standard EN-VDENominal current I N8 ANominal voltage U N160 VMaximum load current8 AInsulating material PBTInflammability class acc. to UL 94V0Certificates / ApprovalsApproval logoCSANominal voltage U N300 VNominal current I N8 ACULNominal voltage U N300 VNominal current I N8 AULNominal voltage U N300 VNominal current I N8 ACertification CB, CSA, CUL, GOST, UL, VDE-PZIAccessoriesItem Designation DescriptionMarking0804109SK 3,81/2,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 10-section markerstrip, 14 identical decades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for 140 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating materialAdditional productsItem Designation DescriptionGeneral1851135FK-MCP 1,5/11-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.81 mm, no. of positions: 11, type of connection: Spring-cageconnection1850754FRONT-MC 1,5/11-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V,pitch: 3.81 mm, no. of positions: 11, type of connection: Screwconnection1862661IMC 1,5/11-G-3,81Header, nominal current: 8 A, rated voltage: 160 V, pitch: 3.81mm, no. of positions: 11, mounting: Soldering1875519IMCV 1,5/11-G-3,81Header, nominal current: 8 A, rated voltage: 160 V, pitch: 3.81mm, no. of positions: 11, mounting: Soldering1803662MC 1,5/11-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V,pitch: 3.81 mm, no. of positions: 11, type of connection: Screwconnection1852260MCC 1/11-STZ-3,81Plug component, nominal current: 8 A, rated voltage: 160 V,pitch: 3.81 mm, no. of positions: 11, type of connection: Crimpconnection1827211MCVR 1,5/11-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V,pitch: 3.81 mm, no. of positions: 11, type of connection: Screwconnection1827062MCVW 1,5/11-ST-3,81Plug component, nominal current: 8 A, rated voltage: 160 V,pitch: 3.81 mm, no. of positions: 11, type of connection: Screwconnection1897487QC 0,5/11-ST-3,81Plug, nominal current: 6 A, rated voltage: 320 V, pitch: 3.81mm, number of positions: 11, connection method: Insulationdisplacement connection QUICKONDrawingsDrilling diagramDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1911059中文资料

Extract from the onlinecatalogEMCV 1,5/ 6-G-3,5Order No.: 1911059The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1911059Header, nominal current: 8 A, rated voltage: 160 V, pitch: 3.5 mm, no. of positions: 6, mounting: Press inhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 3.5 mmDimension a17.5 mmNumber of positions6Pin dimensions0,8 x 0,8 mmHole diameter 1.45 mmTechnical dataInsulating material group IIIaRated surge voltage (III/3) 2.5 kVRated surge voltage (III/2) 2.5 kVRated surge voltage (II/2) 2.5 kVRated voltage (III/2)160 VRated voltage (II/2)250 VConnection in acc. with standard EN-VDENominal current I N8 ANominal voltage U N160 VMaximum load current8 AInsulating material PBTInflammability class acc. to UL 94V0Certificates / ApprovalsApproval logoCULNominal voltage U N300 VNominal current I N8 AULNominal voltage U N300 VNominal current I N8 ACertification CUL, GOST, ULAccessoriesItem Designation DescriptionAssembly1877258EMC 1,5-SH Stamp holder, for upper and lower stamp1877274EMCV 1,5-SS 1Stamp set, consisting of upper and lower stamp for 3.81 mm pitch,2 to 16-pos.Marking0804073SK 3,5/2,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 10-section markerstrip, 14 identical decades marked 1-10, 11-20 etc. up to 91-100,sufficient for 140 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating materialAdditional productsItem Designation DescriptionGeneral1840405MC 1,5/ 6-ST-3,5Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.5 mm, no. of positions: 6, type of connection: Screw connection 1863194MCVR 1,5/ 6-ST-3,5Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.5 mm, no. of positions: 6, type of connection: Screw connection 1862894MCVW 1,5/ 6-ST-3,5Plug component, nominal current: 8 A, rated voltage: 160 V, pitch:3.5 mm, no. of positions: 6, type of connection: Screw connection DrawingsDrilling diagramDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1-1825098-1资料

1-1825098-1 Product DetailsHome | Customer Support | Suppliers | Site Map | Privacy Policy | Browser Support© 2008 Tyco Electronics Corporation All Rights Reserved SearchProducts Documentation Resources My Account Customer Support Home > Products > By Type > Switches > Product Feature Selector > Product Details1-1825098-1TE Part Number: 1-1825098-1ActiveAdd to Part List Pushbutton SwitchesAlways EU RoHS/ELV Compliant (Statement of Compliance)Product Highlights:?Switch -Mechanical?Not Tactile?Single Pole -Single ThrowConfiguration (Pole-Throw)?Contact Rating = 1A?Operating Function = Normally Open,MomentaryView all Features | Find SimilarProductsCheck Pricing &AvailabilitySearch for ToolingProduct FeatureSelectorContact Us AboutThis ProductQuick LinksDocumentation & Additional InformationProduct Drawings:?PUSHBUTTON SWITCH, TPC SERIES(PDF, English)Catalog Pages/Data Sheets:?None AvailableProduct Specifications:?None AvailableApplication Specifications:?None AvailableInstruction Sheets:?None AvailableCAD Files:?None AvailableList all Documents Additional Information:?Product Line InformationRelated Products:?ToolingProduct Features (Please use the Product Drawing for all design activity)Product Type Features:?Product Type = Switch -Mechanical?Tactile = No?Configuration (Pole-Throw) = Single Pole -Single Throw?Mount Angle = Vertical?Termination Type = Printed Circuit?Actuator Style = RoundElectrical Characteristics:?Contact Rating = 1ABody Related Features:?Series = TPC?Mount Style = Through-Hole?Actuator Length (mm [in]) = 3.48 [0.137]?Actuator Profile = Extended?Actuator Color = Black?Bushing Diameter = 10/48?Case Material = Polyester?Actuator Material = PolyamideContact Related Features:?Contact Plating = SilverHousing Related Features:?Process Sealed = No?Low Profile = No?Bushing Style = Threaded Configuration Related Features:?Operating Function = Normally Open,Momentary?Ganged = No?ESD Grounding Terminal = Without?Actuator Force (g [oz]) = 50.00 –400.00[1.770 –14.120]?Number of Actuators = Single?Illuminated = No?Dust Proof = No?Support Bracket = Without?Snap Action = WithoutIndustry Standards:?RoHS/ELV Compliance = RoHS compliant, ELVcompliant?Lead Free Solder Processes = Wave soldercapable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C?RoHS/ELV Compliance History = Always wasRoHS compliantConditions for Usage:?Temperature Rating = HighPackaging Related Features:?Packaging Method = Loose PieceOther:?Brand = AlcoswitchProvide Website Feedback | Need Help?。

1809721资料

Extract from the onlinecatalogMSTBC 2,5/24-STZ-5,08Order No.: 1809721The illustration shows a 15-position versionhttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1809721Plug component, nominal current: 12 A, rated voltage: 320 V, pitch:5.08 mm, no. of positions: 24, type of connection: Crimp connectionhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5.08 mmNumber of positions24Technical dataInsulating material group IRated surge voltage (III/3) 4 kVRated surge voltage (III/2) 4 kVRated surge voltage (II/2) 4 kVRated voltage (III/2)320 VRated voltage (II/2)630 VConnection in acc. with standard EN-VDENominal current I N12 ANominal voltage U N320 VNominal cross section 2.5 mm2Maximum load current12 AInsulating material PAInflammability class acc. to UL 94V0Connection dataConductor cross section stranded min.0.5 mm2Conductor cross section stranded max. 2.5 mm2Conductor cross section AWG/kcmil min.20Conductor cross section AWG/kcmil max14Certificates / ApprovalsApproval logoCSANominal voltage U N300 VNominal current I N10 AAWG/kcmil20-14CULNominal voltage U N300 VNominal current I N10 AAWG/kcmil20-14ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil20-14Certification CB, CSA, CUL, UL, VDE-PZIAccessoriesItem Designation DescriptionMarking0804293SK 5,08/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating material3190564MSTBC-MT 0,5-1,0Module female contact, is inserted into the plug housing MSTBCafter crimping the conductor, for conductors from 0.5 to 1.0 mm²3190645MSTBC-MT 0,5-1,0 BA Module female contact, is inserted into the MSTBC connectorshell after the conductor has been crimped, for conductors from0.5 - 1.0 mm², ribbon contact3190551MSTBC-MT 1,5-2,5Module female contact, is inserted into the plug housing MSTBCafter crimping the conductor, for conductors from 1.5 to 2.5 mm²3190658MSTBC-MT 1,5-2,5 BA Module female contact, is inserted into the MSTBC connectorshell after the conductor has been crimped, for conductors from1.5 -2.5 mm², ribbon contact1810529STZ 2-MSTBC-5,08Strain relief for snapping into the latching chambers of the plugcomponents, 2-pos., labeling with ZB 61810532STZ 4-MSTBC-5,08Strain relief for snapping into the latching chambers of the plugcomponents, 4-pos., labeling with ZB 61810516STZ 8-MSTBC-5,08Strain relief for snapping into the latching chambers of the plugcomponents, 8-pos., labeling with ZB 61810503STZ 12-MSTBC-5,08Strain relief for snapping into the latching chambers of the plugcomponents, 12-pos., labeling with ZB 6Tools1204038CRIMPFOX MT 2,5Crimping pliers, for crimping conductors to the module femalecontacts STG-MTN, crimp range: 0.5-2.5 mm², AWG: 20-14 1205037SZS 0,4X2,5Screwdriver, bladed, matches all screw terminal blocks up to 1.5mm² connection cross section, blade: 0.4 x 2.5 mm Additional productsItem Designation DescriptionGeneral1788949MSTBVK 2,5/24-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 24, mounting: Mounting rail3002034UK 3-MSTB-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 30 - 12, width: 5.1 mm, color: gray3002076UK 3-MVSTB-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 26 - 12, width: 5.1 mm, color: gray3002102UK 3-MVSTB-5,08-LA 24RD Modular terminal block with plug entry, nominal current: 12 A,rated voltage: 320 V, pitch: 5.08 mm, no. of positions: 1, mounting:mounting rail, with red light indicator, voltage light indicator: 24 VAC/DC, current light indicator: 3.3 mA3002063UK 3-MVSTB-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2-2.5mm², AWG: 26-12, width: 5.1 mm, color: blue3002131UK 3D-MSTBV-5,08Modular terminal blocks with vertical plug entry, cross section: 0.2- 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color: gray3002144UK 3D-MSTBV-5,08-LA 24RD Modular terminal block with vertical plug entry, color: Gray, withred light indicator, voltage light indicator: 24 V AC/DC, current lightindicator: 3.3 mA3002173UK 3D-MSTBV-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 30 - 12, width: 5.1 mm, color: blue2770888UKK 3-MSTB-5,08Modular terminal blocks with 2 horizontal plug entries, crosssection: 0.2 - 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color: gray 1876615UKK 3-MSTB-5,08-PE Ground terminal block, with 2 horizontal plug entries, nominalcurrent: 12 A, rated voltage: 320 V, pitch: 5.08 mm, no. ofpositions: 1, mounting: mounting rail.2770846UKK 3-MSTBVH-5,08Modular terminal blocks with vertical and horizontal plug entry,cross section: 0.2 - 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color:gray1788334UMSTBVK 2,5/24-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 24, mounting: Mounting rail1873016ZFKK 1,5-MSTBV-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 1.5mm², width: 5.1 mm, color: grayDrawingsDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1935190资料

Extract from the online catalogThe illustration shows a 15-position version Printed circuit terminal block, nominal current: 16 A, rated voltage: 250 V, pitch: 5.0 mm, no. of positions: 5, mounting: Soldering, type of connection: Screw connection, connection direction from the conductor to the PCB: 0°Order No.1935190Ord designation PT 1,5/ 5-5,0-H Catalog page information Page 308 (CC-2005) Technical dataTightening torque, min 0.4 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/2) 320 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE16 A Nominal current IN250 V Nominal voltage UNNominal cross section 1.5 mm²Maximum load current 16 A Insulating material PA Inflammability class acc. to UL 94 V0 Internal cylindrical gage A1 Stripping length 5 mm Connection dataConductor cross section, rigid min. 0.2 mm²Conductor cross section, rigid max. 2.5 mm²Conductor cross section flexible min. 0.2 mm²Conductor cross section, flexible max. 2.5 mm²0.25 mm²Conductor cross section flexible, with ferrule withoutplastic sleeve min.Conductor cross section flexible, with ferrule without1.5 mm²plastic sleeve max.0.25 mm²Conductor cross section flexible, with ferrule with plasticsleeve min.1.5 mm²Conductor cross section flexible, with ferrule with plasticsleeve max.Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 142 conductors with same cross section, solid min. 0.2 mm²2 conductors with same cross section, solid max. 0.75 mm²2 conductors with same cross section, flexible, min. 0.2 mm²2 conductors with same cross section, flexible max. 0.75 mm²0.25 mm²2 conductors with same cross section, flexible, ferruleswithout plastic sleeve min.0.34 mm²2 conductors with same cross section, flexible, ferruleswithout plastic sleeve, max.2 conductors with same cross section, flexible, TWIN0.5 mm²ferrules with plastic sleeve, min.2 conductors with identical cross section, flexible TWIN0.75 mm²ferrules with plastic sleeve, max.CertificatesCUL300 V Nominal voltage UNNominal current I10 ANAWG/kcmil 26-12 Nominal voltage U300 VNNominal current I15 ANAWG/kcmil 26-12300 V Nominal voltage UN16 A Nominal current INAWG/kcmil 26-12 UL300 V Nominal voltage UNNominal current I10 ANAWG/kcmil 26-12300 V Nominal voltage UNNominal current I15 ANAWG/kcmil 26-12300 V Nominal voltage UNNominal current I16 ANAWG/kcmil 26-12Drawings Drilling diagramDimensioned drawingApproval logoAccessoriesItem Designation DescriptionMarking0804183SK 5/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocksTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalAddressPHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 832825 BlombergGermanyPhone +49 5235 3 00Fax +49 5235 3 41200 Phoenix ContactTechnical modifications reserved;。

1953185资料

Extract from the onlinecatalogMCDNV 1,5/19-G1-3,5 P14THROrder No.: 1953185The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1953185Headers, 3.5 mm pitch, pin length 14, plug-in direction vertical to the PCBhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsLength16 mmHeight13.3 mmPitch 3.5 mmDimension a63 mmNumber of positions19Pin dimensions0,8 x 0,8 mm Pin spacing 3.5 mmHole diameter 1.4 mmTechnical dataInsulating material group IIIaRated surge voltage (III/3) 2.5 kVRated surge voltage (III/2) 2.5 kVRated surge voltage (II/2) 2.5 kVRated voltage (III/2)200 VRated voltage (II/2)250 V Connection in acc. with standard EN-VDE Nominal current I N8 ANominal voltage U N160 V Maximum load current8 A (per position) Insulating material LCP Inflammability class acc. to UL 94V0Certificates / ApprovalsApproval logoCULNominal voltage U N150 VNominal current I N8 AULNominal voltage U N150 VNominal current I N8 A Certification CUL, ULAccessoriesItem Designation DescriptionMarking0805030SK 3,5/2,8:SO Marker card, special printing, self-adhesive, labeled acc. tocustomer requirements, 14 identical marker strips per card, max.25-position labeling per strip, color: White0804109SK 3,81/2,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 10-section markerstrip, 14 identical decades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for 140 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating materialDrawingsDrilling diagram*) ≤ 8-pos. = 1.3 / > 8-pos. = 1.4Dimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1913138资料

Extract from the onlinecatalogMVSTBW 2,5 HC/ 9-STF-5,08Order No.: 1913138The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1913138COMBICON HC plug components, 5.08 mm pitch, color: green, no. of positions 9, dimension a 40.64 mmhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5.08 mmDimension a40.64 mmNumber of positions9Screw thread M 3Tightening torque, min0.5 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kVRated surge voltage (III/2) 4 kVRated surge voltage (II/2) 4 kVRated voltage (III/2)320 VRated voltage (II/2)630 VConnection in acc. with standard EN-VDENominal current I N16 A (see derating curve) Nominal voltage U N250 VNominal cross section 2.5 mm2Maximum load current16 AInsulating material PAInflammability class acc. to UL 94V0Internal cylindrical gage A3Stripping length7 mmConnection dataConductor cross section solid min.0.2 mm2Conductor cross section solid max. 2.5 mm2Conductor cross section stranded min.0.2 mm2Conductor cross section stranded max. 2.5 mm2Conductor cross section stranded, with ferrule0.25 mm2without plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm2with plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2with plastic sleeve max.Conductor cross section AWG/kcmil min.24Conductor cross section AWG/kcmil max122 conductors with same cross section, solid min.0.2 mm22 conductors with same cross section, solid max. 1 mm22 conductors with same cross section, stranded0.2 mm2min.2 conductors with same cross section, stranded max.1.5 mm22 conductors with same cross section, stranded,ferrules without plastic sleeve, min.0.25 mm 22 conductors with same cross section, stranded,ferrules without plastic sleeve, max.1 mm22 conductors with same cross section, stranded,TWIN ferrules with plastic sleeve, min.0.5 mm 22 conductors with same cross section, stranded,TWIN ferrules with plastic sleeve, max. 1.5 mm2Certificates / ApprovalsApproval logoCULNominal voltage U N 300 V Nominal current I N 10 A AWG/kcmil 30-12ULNominal voltage U N 300 V Nominal current I N 10 A AWG/kcmil 30-12Certification CB, CUL, GOST, UL, VDE-PZIAccessories Item Designation DescriptionMarking 0804303SK 5,08/3,8: 0-9Marker card, printed horizontally, self-adhesive, 10-section marker strip, 12 identical decades marked 0-9, sufficient for 120 terminal blocks0804293SK 5,08/3,8:FORTL.ZAHLENMarker card, printed horizontally, self-adhesive, 12 identical decades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for 120 terminal blocks0805085SK 5,08/3,8:SOMarker card, special printing, self-adhesive, labeled acc. tocustomer requirements, 12 identical marker strips per card, max.25-position labeling per strip, color: white0805412SK 5,08/3,8:UNBEDRUCKT Marker cards, unprinted, with pitch divisions, self-adhesive, 10-section marker strips, 12 strips per card, can be labeled with theM-PEN0803906SK U/3,8 WH:UNBEDRUCKT Unprinted marker cards, DIN A4 format, pitch as desired, self-adhesive, with 40 stamped marker strips, 185 mm strip length, canbe labeled with the CMS system or manually with the M-PENPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating materialTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalAdditional productsItem Designation DescriptionGeneral1924156MSTB 2,5 HC/ 9-GF-5,08COMBICON HC headers, 5.08 mm pitch, color: green, no. ofpositions 9, dimension a 40.64 mm1924596MSTBV 2,5 HC/ 9-GF-5,08COMBICON HC headers, 5.08 mm pitch, color: green, no. ofpositions 9, dimension a 40.64 mmDrawingsDiagramDerating curve for: MVSTBR 2,5 HC/..-ST with MSTBVA 2,5HC/..-GDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1809035资料

Extract from the onlinecatalogMSTBC 2,5/24-ST-5,08Order No.: 1809035The illustration shows a 15-position versionhttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1809035Plug component, nominal current: 12 A, rated voltage: 320 V, pitch:5.08 mm, no. of positions: 24, type of connection: Crimp connectionhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5.08 mmNumber of positions24Technical dataInsulating material group IRated surge voltage (III/3) 4 kVRated surge voltage (III/2) 4 kVRated surge voltage (II/2) 4 kVRated voltage (III/2)320 VRated voltage (II/2)630 VConnection in acc. with standard EN-VDENominal current I N12 ANominal voltage U N320 VNominal cross section 2.5 mm2Maximum load current12 AInsulating material PAInflammability class acc. to UL 94V0Connection dataConductor cross section stranded min.0.5 mm2Conductor cross section stranded max. 2.5 mm2Conductor cross section AWG/kcmil min.20Conductor cross section AWG/kcmil max14Certificates / ApprovalsApproval logoCSANominal voltage U N300 VNominal current I N10 AAWG/kcmil20-14CULNominal voltage U N300 VNominal current I N10 AAWG/kcmil20-14ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil20-14Certification CB, CSA, CUL, UL, VDE-PZIAccessoriesItem Designation DescriptionMarking0804293SK 5,08/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating material3190564MSTBC-MT 0,5-1,0Module female contact, is inserted into the plug housing MSTBCafter crimping the conductor, for conductors from 0.5 to 1.0 mm²3190645MSTBC-MT 0,5-1,0 BA Module female contact, is inserted into the MSTBC connectorshell after the conductor has been crimped, for conductors from0.5 - 1.0 mm², ribbon contact3190551MSTBC-MT 1,5-2,5Module female contact, is inserted into the plug housing MSTBCafter crimping the conductor, for conductors from 1.5 to 2.5 mm²3190658MSTBC-MT 1,5-2,5 BA Module female contact, is inserted into the MSTBC connectorshell after the conductor has been crimped, for conductors from1.5 -2.5 mm², ribbon contactTools1204038CRIMPFOX MT 2,5Crimping pliers, for crimping conductors to the module femalecontacts STG-MTN, crimp range: 0.5-2.5 mm², AWG: 20-14 1205037SZS 0,4X2,5Screwdriver, bladed, matches all screw terminal blocks up to 1.5mm² connection cross section, blade: 0.4 x 2.5 mmAdditional productsItem Designation DescriptionGeneral1788949MSTBVK 2,5/24-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 24, mounting: Mounting rail3002034UK 3-MSTB-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 30 - 12, width: 5.1 mm, color: gray3002076UK 3-MVSTB-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 26 - 12, width: 5.1 mm, color: gray3002102UK 3-MVSTB-5,08-LA 24RD Modular terminal block with plug entry, nominal current: 12 A,rated voltage: 320 V, pitch: 5.08 mm, no. of positions: 1, mounting:mounting rail, with red light indicator, voltage light indicator: 24 VAC/DC, current light indicator: 3.3 mA3002063UK 3-MVSTB-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2-2.5mm², AWG: 26-12, width: 5.1 mm, color: blue3002131UK 3D-MSTBV-5,08Modular terminal blocks with vertical plug entry, cross section: 0.2- 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color: gray3002144UK 3D-MSTBV-5,08-LA 24RD Modular terminal block with vertical plug entry, color: Gray, withred light indicator, voltage light indicator: 24 V AC/DC, current lightindicator: 3.3 mA3002173UK 3D-MSTBV-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 30 - 12, width: 5.1 mm, color: blue2770888UKK 3-MSTB-5,08Modular terminal blocks with 2 horizontal plug entries, crosssection: 0.2 - 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color: gray 1876615UKK 3-MSTB-5,08-PE Ground terminal block, with 2 horizontal plug entries, nominalcurrent: 12 A, rated voltage: 320 V, pitch: 5.08 mm, no. ofpositions: 1, mounting: mounting rail.2770846UKK 3-MSTBVH-5,08Modular terminal blocks with vertical and horizontal plug entry,cross section: 0.2 - 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color:gray1788334UMSTBVK 2,5/24-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 24, mounting: Mounting rail1873016ZFKK 1,5-MSTBV-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 1.5mm², width: 5.1 mm, color: grayDrawingsDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

1975189资料

Extract from the onlinecatalogFKCS 2,5/13-ST-5,08Order No.: 1975189The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1975189Plug, no. of positions: 13, pitch: 5.08 mm, U = 250 V, I = 12 A, rated cross section = 2.5 mm²http://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5.08 mmDimension a60.96 mmNumber of positions13Technical dataInsulating material group IRated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/2)320 V Rated voltage (II/2)630 V Connection in acc. with standard EN-VDE Nominal current I N12 A Nominal voltage U N250 V Nominal cross section 2.5 mm2 Maximum load current12 A Insulating material PA Inflammability class acc. to UL 94V0 Internal cylindrical gage A2 Stripping length10 mmConnection dataConductor cross section solid min.0.2 mm2 Conductor cross section solid max. 2.5 mm2 Conductor cross section stranded min.0.2 mm2 Conductor cross section stranded max. 2.5 mm2 Conductor cross section stranded, with ferrule0.25 mm2 without plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2 without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm2 with plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2 with plastic sleeve max.Conductor cross section AWG/kcmil min.24 Conductor cross section AWG/kcmil max122 conductors with same cross section, stranded,0.5 mm2 TWIN ferrules with plastic sleeve, min.2 conductors with same cross section, stranded,1.5 mm2 TWIN ferrules with plastic sleeve, max.Certificates / ApprovalsApproval logoCULNominal voltage U N300 VNominal current I N10 AAWG/kcmil26-12ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil26-12Certification CB, CUL, GOST, UL, VDE-PZIAccessoriesItem Designation DescriptionAssembly1876880STZ 8-FKC-5,08Strain relief for snapping into the latching chambers of the plugcomponents, 8-pos.1876877STZ 4-FKC-5,08Strain relief for snapping into the latching chambers of the plugs,4-pos.Marking1051993B-STIFT Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm0804293SK 5,08/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocks0805085SK 5,08/3,8:SO Marker card, special printing, self-adhesive, labeled acc. tocustomer requirements, 12 identical marker strips per card, max.25-position labeling per strip, color: white0805412SK 5,08/3,8:UNBEDRUCKT Marker cards, unprinted, with pitch divisions, self-adhesive, 10-section marker strips, 12 strips per card, can be labeled with theM-PENPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating material0201689MPS-IH BU Insulating sleeve (blue), for MPS metal part to be orderedseparately (0201744)0201702MPS-IH GN Insulating sleeve (green), for MPS metal part to be orderedseparately (0201744)0201676MPS-IH RD Insulating sleeve (red), for MPS metal part to be orderedseparately (0201744)0201663MPS-IH WH Insulating sleeve (white), for MPS metal part to be orderedseparately (0201744)0201744MPS-MT Test plug, consisting of: Metal part for 2.3 mm diameter sockethole0201647RPS Reducing plug, for transition from 4 mm diameter test plug socket,insulation: grayTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalAdditional productsItem Designation DescriptionGeneral1859519EMSTBVA 2,5/ 2-G-5,08Header, nominal current: 12 A, rated voltage: 200 V, pitch: 5.08mm, no. of positions: 2, mounting: Press in1873359FKIC 2,5/ 2-ST-5,08Plug component, nominal current: 12 A, rated voltage: 320 V,pitch: 5.08 mm, no. of positions: 2, type of connection: Spring-cage connection1823846ICC 2,5/ 2-STZ-5,08Plug component, nominal current: 12 A, rated voltage: 250 V,pitch: 5.08 mm, no. of positions: 2, type of connection: Crimpconnection1762062MDSTB 2,5/ 2-G-5,08Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 2, mounting: Soldering1763074MDSTBV 2,5/ 2-G-5,08Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 2, mounting: Soldering1802430MDSTBW 2,5/ 2-G-5,08Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 2, mounting: Soldering1770711MSTB 2,5/ 2-G-5,08-LA Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 2, mounting: Soldering1757242MSTBA 2,5/ 2-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 2, mounting: Soldering1770944MSTBA 2,5/ 2-G-5,08-LA Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 2, mounting: Soldering1788729MSTBVK 2,5/ 2-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 2, mounting: Mounting rail1788538MVSTBU 2,5/ 2-GB-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 2, mounting: Direct mounting1769463SMSTB 2,5/ 2-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 2, mounting: Soldering1767371SMSTBA 2,5/ 2-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 2, mounting: Soldering3002034UK 3-MSTB-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 30 - 12, width: 5.1 mm, color: gray3002076UK 3-MVSTB-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 26 - 12, width: 5.1 mm, color: gray3002102UK 3-MVSTB-5,08-LA 24RD Modular terminal block with plug entry, nominal current: 12 A,rated voltage: 320 V, pitch: 5.08 mm, no. of positions: 1, mounting:mounting rail, with red light indicator, voltage light indicator: 24 VAC/DC, current light indicator: 3.3 mA3002063UK 3-MVSTB-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2-2.5mm², AWG: 26-12, width: 5.1 mm, color: blue3002131UK 3D-MSTBV-5,08Modular terminal blocks with vertical plug entry, cross section: 0.2- 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color: gray3002144UK 3D-MSTBV-5,08-LA 24RD Modular terminal block with vertical plug entry, color: Gray, withred light indicator, voltage light indicator: 24 V AC/DC, current lightindicator: 3.3 mA3002173UK 3D-MSTBV-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 30 - 12, width: 5.1 mm, color: blue2770888UKK 3-MSTB-5,08Modular terminal blocks with 2 horizontal plug entries, crosssection: 0.2 - 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color: gray 1876615UKK 3-MSTB-5,08-PE Ground terminal block, with 2 horizontal plug entries, nominalcurrent: 12 A, rated voltage: 320 V, pitch: 5.08 mm, no. ofpositions: 1, mounting: mounting rail.2770846UKK 3-MSTBVH-5,08Modular terminal blocks with vertical and horizontal plug entry,cross section: 0.2 - 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color:gray1788114UMSTBVK 2,5/ 2-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 2, mounting: Mounting rail1873016ZFKK 1,5-MSTBV-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 1.5mm², width: 5.1 mm, color: grayDrawings Dimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。