TSH-500称重传感器
梅特勒(常州)托利多称重传感器参考资料
梅特勒（常州）托利多称重传感器参考资料梅特勒托利多称重传感器参照图瑞士METTLER TOLEDO梅特勒托利多称重传感器类型TSC/TSB拉式S型称重传感器产品型号产品描述TSC-50 钢质拉式传感器，容量50KG,5M电缆TSC-100 钢质拉式传感器，容量100KG,5M电缆TSC-200 钢质拉式传感器，容量200KG,5M电缆TSC-300 钢质拉式传感器，容量300KG,5M电缆TSC-500 钢质拉式传感器，容量500KG,5M电缆TSC-1000 钢质拉式传感器，容量1000KG,5M电缆TSB-2000 钢质拉式传感器，容量2000KG,5M电缆TSB-2000 钢质拉式传感器，容量2000KG,12M电缆TSB-3000 钢质拉式传感器，容量3000KG,5M电缆TSB-3000 钢质拉式传感器，容量3000KG,12M电缆TSB-5000 钢质拉式传感器，容量5000KG,5M电缆TSB-5000 钢质拉式传感器，容量5000KG,12M电缆拉式称重传感器连接件产品型号产品描述TP-100～300 配100～300KG TSC,拉杆式TP-500～1000 配500～1000KG TSC,拉杆式ZP-100～300 配100～300KG TSC,关节轴承式ZP-500～1000 配500～1000KG TSC,关节轴承式ZP-2000 配2000KG TSB,关节轴承式ZP-3000 配3000KG TSB,关节轴承式ZP-5000 配5000KG TSB,关节轴承式SB系列剪切梁传感器产品型号产品描述SB-0.3 剪切梁传感器，容量0.3T,盲孔，4M电缆SB-0.5t 剪切梁传感器，容量0.5T,盲孔，4M电缆SB-0.5t 剪切梁传感器，容量0.5T,盲孔，12M电缆SB-1t 剪切梁传感器，容量1T,盲孔，4M电缆SB-1t 剪切梁传感器，容量1T,盲孔，12M电缆SB-2t 剪切梁传感器，容量2T,盲孔，4M电缆SB-2t 剪切梁传感器，容量2T,盲孔，12M电缆SB-3t 剪切梁传感器，容量3T,盲孔，4M电缆SB-5t 剪切梁传感器，容量5T,盲孔孔，5M电缆SB-10t 剪切梁传感器，容量10T,盲孔孔，6M电缆SB-15t 剪切梁传感器，容量15T,盲孔孔，10M电缆SB-20t 剪切梁传感器，容量20T,盲孔孔，10M电缆SBT系列剪切梁传感器产品型号产品描述SBT-0.3t 剪切梁传感器，容量0.3T,通孔，4M电缆SBT-0.5t 剪切梁传感器，容量0.5T,通孔，4M电缆SBT-1t 剪切梁传感器，容量1T,通孔，4M电缆SBT-2t 剪切梁传感器，容量2T,通孔，4M电缆SBT-3t 剪切梁传感器，容量3T,通孔，4M电缆SBT-5t 剪切梁传感器，容量5T,通孔，5M电缆SBS系列剪切梁传感器产品型号产品描述SBS-0.3t 剪切梁传感器，容量0.3T,螺纹孔，4M电缆SBS-0.5t 剪切梁传感器，容量0.5T,螺纹孔，4M电缆SBS-1t 剪切梁传感器，容量1T,螺纹孔，4M电缆SBS-2t 剪切梁传感器，容量2T,螺纹孔，4M电缆SBS-3t 剪切梁传感器，容量3T,螺纹孔，4M电缆SBC系列紧密型剪切梁称重传感器及其连接件产品型号产品描述SBC-0.5t 紧密型剪切梁传感器，容量0.5T,3M电缆SBC-0.5t 紧密型剪切梁传感器，容量0.5T,6M电缆SBC-1t 紧密型剪切梁传感器，容量1T,3M电缆SBC-1t 紧密型剪切梁传感器，容量1T,6M电缆SBC-2t 紧密型剪切梁传感器，容量2T,3M电缆SBC-2t 紧密型剪切梁传感器，容量2T,6M电缆SBC-3t 紧密型剪切梁传感器，容量3T,3M电缆SBC-3t 紧密型剪切梁传感器，容量3T,6M电缆连接件SPC-0.5～3T 紧密型剪切梁称重传感器专用连接件SPC-5T 紧密型剪切梁称重传感器专用连接件SBH系列不锈钢焊接密封传感器产品型号产品描述SBH-0.25t 弯曲梁称重传感器，称重容量0.25T，5M电缆SBH-0.5t 弯曲梁称重传感器，称重容量0.5T，5M电缆SBH-1t 弯曲梁称重传感器，称重容量1T，5M电缆SBH-2t 弯曲梁称重传感器，称重容量2T，5M电缆SBH-3t 弯曲梁称重传感器，称重容量3T，5M电缆SBH-5 弯曲梁称重传感器，称重容量5T，5M电缆IL系列称重传感器产品型号产品描述IL-150KG 钢质弯曲梁传感器，容量150KG,2.5M电缆IL-250KG 钢质弯曲梁传感器，容量250KG,2.5M电缆IL-500KG 钢质弯曲梁传感器，容量500KG,2.5M电缆IL-1000KG 钢质弯曲梁传感器，容量1000KG,2.5M电缆IL-2000KG 钢质弯曲梁传感器，容量2000KG,2.5M电缆0745A/0743系列不锈钢焊接密封传感器产品型号产品描述0745A-0.22t 0745A称重传感器0.22T,2.2M电缆0745A-0.22t 0745A称重传感器0.22T,4.5M电缆0745A-0.22t 0745A称重传感器0.22T,9M电缆0745A-0.55t 0745A称重传感器0.55T,2.2M电缆0745A-0.55t 0745A称重传感器0.55T,4.5M电缆0745A-0.55t 0745A称重传感器0.55T,9M电缆0745A-1.1t 0745A称重传感器1.1T,2.2M电缆0745A-1.1t 0745A称重传感器1.1T,4.5M电缆0745A-1.1t 0745A称重传感器1.1T,9M电缆0745A-2.2t 0745A称重传感器2.2T,2.2M电缆0745A-2.2t 0745A称重传感器2.2T,4.5M电缆0745A-2.2t 0745A称重传感器2.2T,9M电缆0745A-4.4t 0745A称重传感器4.4T,4.5M电缆0745A-4.4t 0745A称重传感器4.4T,9M电缆0745A-4.4t 0745A称重传感器4.4T,18M电缆GD柱式称重传感器产品型号产品描述GD-15 柱式GD不锈钢称重传感器,容量15t，13M电缆GD-20 柱式GD不锈钢称重传感器,容量20t，13M电缆GD-30 柱式GD不锈钢称重传感器,容量30t，13M电缆GD-50 柱式GD不锈钢称重传感器,容量50t，13M电缆GD-100 柱式GD不锈钢称重传感器,容量100t，13M电缆GD柱式防爆传感器产品型号产品描述GD-15x 柱式GD不锈钢称重传感器,容量15t，13M电缆GD-20x 柱式GD不锈钢称重传感器,容量20t，13M电缆GD-30x 柱式GD不锈钢称重传感器,容量30t，13M电缆GD-50x 柱式GD不锈钢称重传感器,容量50t，13M电缆GD-100x 柱式GD不锈钢称重传感器,容量100t，13M电缆电流型模拟量输出传感器产品型号产品描述GD-15-AOC GD电流型模拟量输出传感器，容量15T,13M电缆GD-20-AOC GD电流型模拟量输出传感器，容量20T,13M电缆GD-30-AOC GD电流型模拟量输出传感器，容量30T,13M电缆GD-50-AOC GD电流型模拟量输出传感器，容量50T,13M电缆GD-100-AOC GD电流型模拟量输出传感器，容量100T,13M电缆GD-200-AOC GD电流型模拟量输出传感器，容量200T,20M电缆GD-250-AOC GD电流型模拟量输出传感器，容量250T,20M电缆GD-300-AOC GD电流型模拟量输出传感器，容量300T,30M电缆GD-400-AOC GD电流型模拟量输出传感器，容量400T,30M电缆GD-500-AOC GD电流型模拟量输出传感器，容量500T,30M电缆PGD-2-AOC GD电流型模拟量输出传感器，容量2T,13M电缆PGD-5-AOC GD电流型模拟量输出传感器，容量5T,13M电缆PGD-10-AOC GD电流型模拟量输出传感器，容量10T,13M电缆PGD-20-AOC GD电流型模拟量输出传感器，容量20T,13M电缆PGD-30-AOC GD电流型模拟量输出传感器，容量30T,13M电缆PGD-50-AOC GD电流型模拟量输出传感器，容量50T,13M电缆选配件（用于隔离电源及信号）3042隔离安全栅3042隔离安全栅屏蔽电缆瑞士METTLER TOLEDO梅特勒托利多称重模块类型FW/CW系列称重模块产品型号产品描述FW-0.3t 固定式静载模块,容量0.3t,4M电缆FW-0.3t 半浮动式静载模块,容量0.3t,4M电缆FW-0.3t 全浮动式静载模块,容量0.3t,4M电缆FW-0.5t 固定式载模块,容量0.5t,4M电缆FW-0.5t 半浮动式静载模块,容量0.5t,4M电缆FW-0.5t 全浮动式静载模块,容量0.5t,4M电缆FW-1t 固定式静载模块,容量1t,4M电缆FW-1t 固定式静载模块,容量1t,12M电缆FW-1t 半浮动式静载模块,容量1t,4M电缆FW-1t 半浮动式静载模块,容量1t,12M电缆FW-1t 全浮动式静载模块,容量1t,4M电缆FW-1t 全浮动式静载模块,容量1t,12M电缆FW-2t 固定式静载模块,容量2t,4M电缆FW-2t 固定式静载模块,容量2t,12M电缆FW-2t 半浮动式静载模块,容量2t,4M电缆FW-2t 半浮动式静载模块,容量2t,12M电缆FW-2t 全浮动式静载模块,容量2t,4M电缆FW-2t 全浮动式静载模块,容量2t,12M电缆FW-3t 固定式静载模块,容量3t,4M电缆FW-3t 半浮动式静载模块,容量3t,4M电缆FW-3t 全浮动式静载模块,容量3t,4M电缆FW-5t 固定式静载模块,容量5t,5M电缆FW-5t 半浮动式静载模块,容量5t,5M电缆FW-5t 全浮动式静载模块,容量5t,5M电缆FW-10t 固定式静载模块,容量10t,6M电缆FW-10t 半浮动式静载模块,容量10t,6M电缆FW-10t 全浮动式静载模块,容量10t,6M电缆FW-15t 固定式静载模块,容量15t,10M电缆FW-15t 半浮动式静载模块,容量15t,10M电缆FW-15t 全浮动式静载模块,容量15t,10M电缆FW-20t 固定式静载模块,容量20t,10M电缆FW-20t 半浮动式静载模块,容量20t,10M电缆FW-20t 全浮动式静载模块,容量20t,10M电缆CW-0.3t 动载模块,容量0.3t,4M电缆CW-0.5t 动载模块,容量0.5t,4M电缆CW-1t 动载模块,容量1t,4M电缆CW-2t 动载模块,容量2t,4M电缆CW-3t 动载模块,容量3t,4M电缆CW-5t 动载模块,容量5t,5M电缆CW-10t 动载模块,容量10t,6M电缆CW-15t 动载模块,容量15t,10M电缆CW-20t 动载模块,容量20t,10M电缆FWC/CWC系列称重模块产品型号产品描述FWC-0.22x 防爆固定式不锈钢静载模块,容量0.22t,4.5M电缆FWC-0.22x 防爆浮动式不锈钢静载模块,容量0.22t,4.5M电缆FWC-0.22x 防爆半防爆浮动式不锈钢静载模块,容量0.22t,4.5M电缆FWC-0.55x 防爆固定式不锈钢静载模块,容量0.55t,4.5M电缆FWC-0.55x 防爆浮动式不锈钢静载模块,容量0.55t,4.5M电缆FWC-0.55x 防爆半防爆浮动式不锈钢静载模块,容量0.55t,4.5M电缆FWC-1.1x 防爆固定式不锈钢静载模块,容量1.1t,4.5M电缆FWC-1.1x 防爆浮动式不锈钢静载模块,容量1.1t,4.5M电缆FWC-1.1x 防爆半防爆浮动式不锈钢静载模块,容量1.1t,4.5M电缆FWC-2.2x 防爆固定式不锈钢静载模块,容量2.2t,4.5M电缆FWC-2.2x 防爆浮动式不锈钢静载模块,容量2.2t,4.5M电缆FWC-2.2x 防爆半防爆浮动式不锈钢静载模块,容量2.2t,4.5M电缆FWC-4.4x 防爆固定式不锈钢静载模块,容量4.4t,4.5M电缆FWC-4.4x 防爆浮动式不锈钢静载模块,容量4.4t,4.5M电缆FWC-4.4x 防爆半防爆浮动式不锈钢静载模块,容量4.4t,4.5M电缆FWC-9x 防爆固定式不锈钢静载模块,容量9t,9M电缆FWC-9x 防爆浮动式不锈钢静载模块,容量9t,9M电缆FWC-9x 防爆半防爆浮动式不锈钢静载模块,容量9t,9M电缆FWC-13.6x 防爆固定式不锈钢静载模块,容量13.6t,9M电缆FWC-13.6x 防爆浮动式不锈钢静载模块,容量13.6t,9M电缆FWC-13.6x 防爆半防爆浮动式不锈钢静载模块,容量13.6t,9M电缆FWC-20x 防爆固定式不锈钢静载模块,容量20t,9M电缆FWC-20x 防爆浮动式不锈钢静载模块,容量20t,9M电缆FWC-20x 防爆半防爆浮动式不锈钢静载模块,容量20t,9M电缆CWC-0.22x 不锈钢动载模块,容量0.22t,4.5M电缆CWC-0.55x 不锈钢动载模块,容量0.55t,4.5M电缆CWC-1.1x 不锈钢动载模块,容量1.1t,4.5M电缆CWC-2.2x 不锈钢动载模块,容量2.2t,4.5M电缆CWC-4.4x 不锈钢动载模块,容量4.4t,4.5M电缆CWC-9x 不锈钢动载模块,容量9t,9M电缆CWC-13.6x 不锈钢动载模块,容量13.6t,9M电缆CWC-20x 不锈钢动载模块,容量20t,9M电缆GW/UW/PGW/GWA/PGWA-X模块产品型号产品描述GW-15x 防爆GW不锈钢称重模块,容量15t,,13M电缆GW-20x 防爆GW不锈钢称重模块,容量20t,,13M电缆GW-30x 防爆GW不锈钢称重模块,容量30t,,13M电缆GW-50x 防爆GW不锈钢称重模块,容量50t,,13M电缆GW-100x 防爆GW不锈钢称重模块,容量100t,,13M电缆GW-200x 防爆GW不锈钢称重模块,容量200t,,20M电缆GW-250x 防爆GW不锈钢称重模块,容量250t,,20M电缆GW-300x 防爆GW不锈钢称重模块,容量300t,,30M电缆GW-400x 防爆GW不锈钢称重模块,容量400t,,30M电缆GW-500x 防爆GW不锈钢称重模块,容量500t,,30M电缆GWA-15x 防爆GWA称重模块,容量15t,,13M电缆GWA-20x 防爆GWA称重模块,容量20t,,13M电缆GWA-30x 防爆GWA称重模块,容量30t,,13M电缆GWA-50x 防爆GWA称重模块,容量50t,,13M电缆GWA-100x 防爆GWA称重模块,容量100t,,13M电缆GWA-200x 防爆GWA称重模块,容量200t,,20M电缆GWA-250x 防爆GWA称重模块,容量250t,,20M电缆GWA-300x 防爆GWA称重模块,容量300t,,30M电缆GWA-400x 防爆GWA称重模块,容量400t,,30M电缆GWA-500x 防爆GWA称重模块,容量500t,,30M电缆产品型号产品描述UW-5x 防爆UW不锈钢称重模块,容量5kg,,3M电缆UW-10x 防爆UW不锈钢称重模块,容量10kg,,3M电缆UW-20x 防爆UW不锈钢称重模块,容量20kg,,3M电缆UW-50x 防爆UW不锈钢称重模块,容量50kg,,3M电缆UW-75x 防爆UW不锈钢称重模块,容量75kg,,3M电缆UW-100x 防爆UW不锈钢称重模块,容量100kg,,3M电缆UW-200x 防爆UW不锈钢称重模块,容量200kg,,3M电缆UW-300x 防爆UW不锈钢称重模块,容量300kg,,3M电缆UW-500x 防爆UW不锈钢称重模块,容量500kg,,3M电缆瑞士METTLER TOLEDO梅特勒托利多仪表类型料罐/料仓/定量打包秤专用仪表IND331/IND131系列称重仪表称重终端面板式IND331 33P100000000000 IND331 33P10000B000000 IND331 33P100000D00000 IND331 33P100000B00000 IND331 33P100000A00000 IND331 33P100000P00000 称重终端防尘式IND331 33H100000000J00 IND331 33H100000D00J00 IND331 33H100000B00J00 IND331 33H100000A00J00 IND331 33H100000P00J00称重终端导轨式IND131 13D100000000000 IND131 13D100000D00000 IND131 13D100000B00000 IND131 13D100000P00000 IND131 13D100000K00000IND131接线盒式IND131 13B100000000000 IND131 13B10000B000000 IND131 13B100000D00000 IND131 13B100000B00000 IND131 13B100000A00000 IND131 13B100000P00000 IND131 13D100000K00000IND245系列称重仪表称重终端普通型IND245 245G13000010J00 IND245 245G14000010J00 IND245 245G13001010J00 IND245 245G14001010J00 IND245 245G13002010J00 IND245 245G13003010J00 IND245 245G13004010J00 IND245 245G13010010J00 IND245 245G13011010J00 IND245 245G10001130J00 IND245 245G10002130J00 IND245 245G10011130J00 IND245 245G10012130J00称重终端防尘型IND245 245H13000010J00 IND245 245H14000010J00 IND245 245H13001010J00 IND245 245H14001010J00 IND245 245H13002010J00 IND245 245H13003010J00IND245 245H13004010J00 IND245 245H13010010J00 IND245 245H13011010J00XK3123 IND320专用仪表产品型号产品描述IND320 32E100000000023，基本型,防护等级IP65IND320 32E10000B000023，配料型，防护等级IP65IND320 32E10000B001023，减量法，防护等级IP65IND320 32E10000A000023，模拟量型，防护等级IP65 IND320 32E10001B000023，配料型，防护等级IP65IND320 32E100000C00023，基本型，canopen接口，IP65 IND320 32E10000BC00023，配料型，canopen接口，IP65 应用领域IND320系列称重仪表广泛应用于：土建筑和建筑路面机械称重仪表技术参数瑞士METTLER TOLEDO梅特勒托利多接线盒类型接线盒AJB模拟类AJB-005 五孔模拟接线盒(不锈钢外壳)AJB-007 七孔模拟接线盒(不锈钢外壳)AJB-003 三孔模拟接线盒(不锈钢外壳)AJB-015接线盒DJB数字类DJB-004 四孔模拟接线盒(不锈钢外壳)DJB-005 五孔模拟接线盒(不锈钢外壳)DJB-006 六孔模拟接线盒(不锈钢外壳)DJB-007 七孔模拟接线盒(不锈钢外壳)接线盒AJB-X防爆类AJB-005X 防爆五孔模拟接线盒(不锈钢外壳)AJB-007X 防爆七孔模拟接线盒(不锈钢外壳)AJB-003X 防爆三孔模拟接线盒(不锈钢外壳)DJB-005X 防爆五孔模拟接线盒(不锈钢外壳)DJB-007X 防爆七孔模拟接线盒(不锈钢外壳)AJB-005N 五孔模拟接线盒(配新结构)AJB-007N 七孔模拟接线盒(配新结构)AJB-006N 六孔模拟接线盒(配新结构)AJB-003N 三孔模拟接线盒(配新结构)接线盒DJB-N数字类DJB-005N 五孔模拟接线盒(配新结构)DJB-007N 七孔模拟接线盒(配新结构)DJB-006N 六孔模拟接线盒(配新结构)DJB-004N 四孔模拟接线盒(配新结构)接线盒DJB-C数字类DJB-004C 四孔数字接线盒(GDD.用于标准汽车衡) DJB-005C 五孔数字接线盒(GDD.用于标准汽车衡) DJB-006C 六孔数字接线盒(GDD.用于标准汽车衡) DJB-007C 七孔数字接线盒(GDD.用于标准汽车衡)接线盒DJB-CN数字类DJB-004CN 四孔数字接线盒(GDD.用于新结构汽车衡) DJB-005CN 五孔数字接线盒(GDD.用于新结构汽车衡) DJB-006CN 六孔数字接线盒(GDD.用于新结构汽车衡)。
高精度衡器用称重传感器选型
于３ ０ ０ ０的，可 以选用 ｃ ３ 级称重传感器 。而对 于 准 确 度要 求 较 高 的衡 器 ，分 度 数 在 ４ ０ ０ ０或 ５ ０ ０ ０ ， 必 须采 用 Ｃ ５或 Ｃ ６级 称 重 传 感 器 ，才 能 满 足设 计 要求 。 目前有不少衡器厂商 ，盲 目追求衡 器的分度 数 ，采用 ｃ ３ 级称重传感器 ，却将衡器 的分度数做 到４ ０ ０ ０或 ５ ０ ０ ０ ，这 是不 符合 科学 规 律 的 ，衡 器 的
【 关键词 １ 高精 度 ；传
［ 中图分类号】 Ｔ Ｈ ７ １ ５ ． １
Ｋｅ ｙ ｗｏ ｒ ｄ ｓ ：ｈ ｉ ｇ ｈ ｐ ｒ ｅ ｃ ｉ ｓ ｉ ｏ ｎ ；ｓ ｅ ｎ ｓ ｏ ｒ
尊 囊 簿 ● ●ｔ ● ● ● ● ● ● ● ● ● ● ● ● ● ●● ● ● ● ● ● ● ● ● ●
。 Ｔ 。 ｅ ｃ ｈ ｎ ｏ ｌ ｏ ｇ ｙ Ｅ ｘ ｃ ｈ ａ ｎ ｇ ｅ・ ： ． ： ． ． ． ． ： ： ． ． ． ： ： ・ ： ・ ・ ・ ・ ・ ・ ・ ・
Ｘ Ｋ ３ １ ９ ０ 一 Ａ ７ ＋仪 表 的 输 入 灵 敏 度 为 Ｉ ＞２ ｖ ， ｅ 。 衡 器取 ｄ ＝ ｅ ，因此选 用 的称 重传 感器 满 足仪 表输 入 灵 敏度 的要 求 ，能够 与所选 仪表 匹配 。
六 、 称 重传 感器 数 量 及 量 程 与 衡 器 的 最 大 秤
量 匹配
称重传感器量程 的选择可依据秤的最大秤量
值 、选 用 称 重 传 感 器 的个 数 、秤 体 的 自重 、可 能 产生 的最 大偏载及 动 载等 因素综 合评 价来 确定 。 对 于案秤 、小 型 台秤 、吊秤 等使用 单 只称重 传
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●一 ●
称重传感器suncells
美国suncells称重传感器suncells传感器HSX-A是美国SUNCELLS公司出品的一款波纹管称重传感器，材质有合金钢和不锈钢可选，采用全激光焊缝，防护等级高，有防尘、防爆等优点。
而且更好的保证了精度，安装也非常的便捷，不易损坏。
美国suncells传感器是美国注册的称重传感器制造商，因其产品价格低廉，质量上乘，是各大化工厂、试验机厂、电子衡器等等行业单位的***。
完善的售后，强大的技术支持，保证suncells产品的广泛应用跟优良的口碑、桥式结构传感器1、QS/QS-A称重传感器，适用于汽车衡、轨道衡、配料秤等。
型号有：QS-5t,QS-10t,QS-15t,QS-20t,QS-25t,QS-30t,QS-40t,QS-50t。
QS-A-5t,QS-A-10t,QS-A-15t,QS-A-20t,QS-A-25t,QS-A-30t,QS-A-40t,QS-A-50 t。
2、QSB-A/-SS称重传感器，适用于汽车衡、轨道衡、轴量秤、地上衡、仓储秤等。
型号有：QSB-A-10klb,QSB-A-20klb,QSB-A-25klb,QSB-A-40klb,QSB-A-50klb,QSB-A-60k lb,QSB-A-75klb。
QSB-SS-10klb,QSB-SS-20klb,QSB-SS-25klb,QSB-SS-40klb,QSB--SS-50klb,QSB -SS-60klb,QSB-SS-75klb。
3、QSC-A/-SS称重传感器，适用于汽车衡、轨道衡、轴量秤、地上衡、仓储秤等。
QSC-A-5klb,QSC-A-10klb,QSC-A-20klb,QSC-A-25klb,QSC-A-30klb,QSC-A-50kl b,QSC-A-60klb,QSC-A-75klb,QSC-A-100klb。
QSC-SS-5klb,QSC-SS-10klb,QSC-SS-20klb,QSC-SS-25klb,QSC-SS-30klb,QSC-S S-50klb,QSC-SS-60klb,QSC-SS-75klb,QSC-SS-100klb。
Z6FC3-500kg称重传感器
【广州兰瑟电子】技术部内部培训用Z6FC3/500kg称重传感器德国HBM Z6FC3/500kg称重传感器描述：第一节相关工序的联系与协调中心控制室是饲料生产过程的控制中枢，它担负着指挥、调度、协调各生产工序的工作。
中心控制室操作工能否当好这个“指挥员”，将直接影响到饲料生产的全过程。
一、中控室与相关工序联系的主要内容中控室与生产现场需要相互联系的主要内容有：（1）启动或停止设备之前，通知现场做好启停设备的准备；现场做好准备后，通知中控室。
（2）变换上仓原料品种之前，通知上料工序做好准备；上料工序做好准备后，通知中控室。
（3）粉料成品出来之后，通知制粒工序进行制粒操作或通知打包工序做好接包准备。
（4）更换生产配方时，通知各有关工序。
（5）中控室监测到设备故障时，通知有关工序。
（6）现场出现问题时，通知中控室进行处理等。
二、中控室与各工序的联系方法中心控制室一般是一个独立的操作空间。
在生产过程中，中控室操作工与其它工序操作工之间一般不容易实现面对面的联系，尤其是与原、辅料工序操作工之间相距较远，联系很不方便。
为了有效地控制生产，可以选用下列方法实现各工序之间的联系：（一）信号联系通过设在现场和中控室的信号灯、电铃和开关，按照事先约定好的联系信号来实现中控室与各工序的联系。
例如，在启动上料工序设备之前，中控室操作工可通过电铃信号通知现场，做好准备；待现场通过电铃或信号灯通知中控室可以启动设备时，中控室操作工才能启动设备。
又例如，在更换原料品种时，中控室操作工可以通过拨动开关，使设在现场的相应指示灯点亮，通知上料工序。
这种联系方法简单使用，投资少。
但缺少直接对话，显得不够方便。
【广州兰瑟电子】技术部内部培训用德国HBM Z6FC3/500kg称重传感器同系列：Z6FC3/10kgZ6FC3/20kgZ6FC3/50kgZ6FC3/100kgZ6FC3/200kg。
梅特勒托利多TSH-200称重传感器
梅特勒托利多TSH-200称重传感器
（广州南创陈工）
Mettler Toledo称重传感器智能传感器是传统传感器与微处理器赋予智能的结合，兼有信息检测与信息处理功能的传感器(系统)。
Mettler Toledo称重传感器智能传感器充分利用微处理器的计算和存储功能，对传感器的数据进行处理并能对它的内部进行调节，使其采集的数据最佳。
梅特勒托利多TSH-200称重传感器具体技术参数信息：
以上内容技术参数以《OIML60号国际建议》92年版为基础，最新具体变化可查看《JJG669—12托利多广州南创传感器事业部检定规程》
梅特勒托利多TSH-200称重传感器产品型号
SBH-0.25 弯曲梁称重传感器，称重容量0.25T，承载孔为盲孔，5M电缆SBH-0.5 弯曲梁称重传感器，称重容量0.5T，承载孔为盲孔，5M电缆SBH-1 弯曲梁称重传感器，称重容量1T，承载孔为盲孔，5M电缆SBH-2 弯曲梁称重传感器，称重容量2T，承载孔为盲孔，5M电缆SBH-3 弯曲梁称重传感器，称重容量3T，承载孔为盲孔，5M电缆SBH-5 弯曲梁称重传感器，称重容量5T，承载孔为盲孔，5M电缆
产品型号额定容量
TSH-200KG 200KG,5M电缆
TSH-300KG 300KG,5M电缆
TSH-500KG 500KG,5M电缆
TSH-1T 1T,5M电缆
TSH-2T 2T,5M电缆
TSH-3T 3T,5M电缆
TSH-5T 5T,5M电缆
梅特勒托利多TSH-200称重传感器结构图：。
称重传感器参数介绍
称重仪表就是利用称重传感器转换为重量数字显示，并可对重量数据进行储存、统计、打印的电子设备，称重传感器常用于工农业生产中的自动化配料，称重，以提高生产效率。
它实际上是一种将质量信号转变为可测量的电信号输出的装置。
用传感器应先要考虑传感器所处的实际工作环境，这点对正确选用称重传感器至关重要，它关系到传感器能否正常工作以及它的安全和使用寿命，乃至整个衡器的可靠性和安全性。
在称重传感器主要技术指标的基本概念和评价方法上，新旧国标有质的差异。
主要有S型、悬臂型、轮辐式、板环式、膜盒式、桥式、柱筒式等几种样式。
S型称重传感器中常见的一种传感器,主要用于测固体间的拉力和压力，通用也人们也称之为拉压力传感器，因为它的外形像S形状，所以习惯上也称S型称重传感器，此传感器采用合金钢材质，胶密封防护处理，安装容易，使用方便，适用于吊秤，配料秤，机改秤等电子测力称重系统。
用途与特点
可用于拉、压力值的测量，输出对称性好，抗偏载能力强。
适用于配料秤、吊钩秤及各类专用秤等。
可选择内置式变送器，标准信号0-10mA、4-20mA或0-5V输出。
南京凯基特电气有限公司位于长三角六朝古都南京市，是一家专业从事传感器及胶带机保护装置研发，生产及销售的企业，其产品原材料采用欧洲进口集成芯片，多条生产线也进口自德国主流设备厂商，生产线具有先进的生产技术和完善的检测手段，严格参照国际标准在中国研发和生产。
产品已被广泛应用于纺织，汽车，电力，电子，化工，冶金，机械，烟草，食品饮料，钢铁，热电，造纸，印刷，橡塑，物流，邮电，航空，交通，刺绣机，包装等工业自动化领域。
TSC-500 称重传感器
南创销售工程三部事业部使用资料
TSC-500称重传感器
托利多TSC系列技术指标：
额定容量TSC-50，TSC-100，TSC-200，TSC-2000，TSC-500，TSC-2000灵敏度mV/V2±0.002
不重复性%R.O.≤0.01
滞后%R.O.≤±0.02
非线性%R.O.≤±0.02
蠕变（30分）%R.O.≤±0.02
零点输出%R.O.≤±1
温度补偿范围℃-10～+40
工作温度范围℃-20～+65
灵敏度温度系数%Load/℃≤±0.002
零点温度系数%R.O./℃≤±0.002
输入阻抗Ω381±4
输出阻抗Ω350±1
绝缘电阻MΩ≥5000(直流50V)
建议激励电压V(DC/AC)5～15
最大激励电压V(DC/AC)20
安全过载%R.C.150
极限过载%R.C.300
防护等级IP65（TSC），IP67（TSB）
电缆长度m5
1)可提供高温传感器，最高工作温度为150℃。
TSC-500称重传感器
TSC系列梅特勒托利多热销产品型号：
METTLER TOLEDO称重传感器TSC-50
METTLER TOLEDO称重传感器TSC-100
METTLER TOLEDO称重传感器TSC-200
METTLER TOLEDO称重传感器TSC-300
METTLER TOLEDO称重传感器TSC-500
METTLER TOLEDO称重传感器TSC-1000
METTLER TOLEDO称重传感器TSB-1000。
laumas FCAX-500KG称重传感器
LAUMAS FCAX-500KG称重传感器
LAUMAS FCAX-500KG称重传感器介绍：
LAUMAS称重传感器分为：单点式、剪切(悬臂)梁式、弯曲梁式、拉力式、柱压式、轴销式、锚式、钢丝绳测力限重器式、增辐放大器式等。
意大利LAUMAS FCAX-500KG称重传感器系列型号：FCAX-30KG称重传感器
FCAX-50KG称重传感器
FCAX-70KG称重传感器
FCAX-150KG称重传感器
FCAX-300KG称重传感器
FCAX-500KG称重传感器
FCAX-750KG称重传感器
FCAX-1000KG称重传感器
FCAX-1500KG称重传感器
LAUMAS FCAX-500KG称重传感器参数：
LAUMAS FCAX-500KG称重传感器同品牌分类：CBLS压式称重传感器(load cells)
PTC单点式称重传感器(load cells)
PTAI单点式称重传感器(load cells)
PT单点式称重传感器(load cells)
PRC单点式称重传感器(load cells)
PR单点式称重传感器(load cells)
PL单点式称重传感器(load cells)
PEI单点式称重传感器(load cells)
PEC单点式称重传感器(load cells)
PE单点式称重传感器(load cells)
AZL单点式称重传感器(load cells)
AZ单点式称重传感器(load cells)
AU单点式称重传感器(load cells)
ATL单点式称重传感器(load cells)。
梅特勒托利多汽车衡
梅特勒托利多汽车衡南创电子销售工程三部传感器使用部内部使用资料梅特勒托利多汽车衡电子地磅秤•碳钢折弯强化结构，适合各种称重要求•配用高精度称重传感器，可选防爆型，不锈钢型•显示器显示称重数据，XK3190-A9仪表采用高精度模数转换技术•交直流两用•外置蓄电池，标准打印接口，A1+P内置16列面板式微打打印机•可选择多种需求：电子平台秤、单层电子小地磅、1吨地磅、2吨地磅、3吨地磅、超低台面平台秤、双层•车衡电子磅、平台秤、电子叉车秤、高度可调双层地磅、不锈钢电子平台秤、大台面单层小地磅、钢材缓冲秤量程：0.5T1T2T3T5T8T10T15T20T精度：0.2㎏0.5㎏1㎏2㎏秤台高度：120mm95mm100mm电子地磅台面尺寸：1m×1m/1.2m×1.2m/1.2m×1.5m/1.5m×1.5m/1.5m×2m/2m×2m/2m×3m梅特勒托利多汽车衡参数图：梅特勒托利多热销的称重传感器如以下：梅特勒托利多拉式传感器：TSC-50TSC-100TSC-200TSC-300TSC-500TSC-1000TSB-2000TSB-3000TSB-5000TSH-200TSH-300TSH-500TSH-1000TSH-2000TSH-3000TSH-5000梅特勒托利多单点式传感器:IL-150IL-250IL-500IL-1000IL-2000MT1022-3MT1022-5MT1022-7MT1022-10MT1022-15MT1022-20MT1022-30MT1041-10MT1041-15MT1041-20MT1041-30MT1041-50MT1041-75MT1041-100MT1241-150MT1241-200MT1241-250MT1260-50MT1260-75MT1260-100MT1260-150MT1260-200MT1260-250MT1260-300 MT1260-500MT1260-635MT1260-750SSH-50SSH-100SSH-200SSH-300SSH-500SSH-1000SSP1022-6SSP1022-10SSP1022-30SSP1241-30SSP1241-50SSP1241-100SSP1241-200SSP1241-300SSP1260-150SSP1260-300SSP1260-500梅特勒托利多桥式传感器：SBD-10SBD-20SBD-25SBD-30SBD-50梅特勒托利多波纹管传感器：MTB-5MTB-10MTB-20MTB-50MTB-75MTB-100MTB-200MTB-300MTB-500梅特勒托利多轮辐式称重传感器：SBF-2.25SBF-4.5SBF-11.25SBF-22.5SBF-45梅特勒托利多剪切梁式传感器:SBC-0.5SBC-1SBC-2SBC-3SBH-0.25SBH-0.5SBH-1SBH-2SBH-3SBH-5SBS-250SBS-500SBS-1000SBS-2000SBS-5000SBT-0.3SBT-0.5SBT-1SBT-2SBT-3SBT-5SB-0.3SB-0.5SB-1SB-2SB-3SB-5SB-10SB-15SB-20SB-30梅特勒托利多摇柱式传感器：GD-15GD-20GD-30GD-50GD-100GD-200GD-250GD-300GD-400GD-500PGD-2PGD-5PGD-10PGD-20PGD-30PGD-50ZY-15ZY-20ZY-30梅特勒托利多高温传感器：GD-15（G）GD-20（G）GD-30（G）GD-50（G）GD-100（G）GD-200（G）GD-250（G）PGD-2（G）PGD-5（G）PGD-10（G）PGD-20（G）PGD-30（G）PGD-50（G）MTB-5（G）MTB-10（G）MTB-20（G）MTB-50（G）MTB-75（G）MTB-100（G）MTB-200（G）MTB-300（G）MTB-500（G）SB-1（G）SB-2（G）SB-3（G）SB-5（G）SB-10（G）SB-15（G）SB-20（G）GD-15-2(G)GD-20-2(G)GD-30-2(G)GD-50-2(G)GD-100-2(G)GD-200-2(G)GD-250-2(G) METTLER TOLEDO(梅特勒托利多)0745A/0743系列不锈钢焊接密封传感器：0745A-0.220745A-0.550745A-1.10745A-2.20745A-4.40743-90743-13.60743-20梅特勒托利多防爆传感器：IL-150X IL-250X IL-500X IL-1000X IL-2000XMT1022-3X MT1022-5X MT1022-7X MT1022-10X MT1022-15X MT1022-20X MT1022-30X MT1041-10X MT1041-15X MT1041-20X MT1041-30X MT1041-50X MT1041-75X MT1041-100X MT1241-150X MT1241-200X MT1241-250XMT1260-50X MT1260-75X MT1260-100X MT1260-150X MT1260-200X MT1260-250X MT1260-300XMT1260-500X MT1260-635X MT1260-750XSSP1022-6X SSP1022-10X SSP1022-30X SSP1241-30X SSP1241-50X SSP1241-100XSSP1241-200X SSP1241-300X SSP1260-150X SSP1260-300X SSP1260-500X SSP-IL-1000x SSP-IL-2000xSSH-50X SSH-100X SSH-200X SSH-300X SSH-500X SSH-1000XSB-0.3X SB-0.5X SB-1X SB-2X SB-3X SB-5X SB-10X SB-15X SB-20XSBT-0.3X SBT-0.5X SBT-1X SBT-2X SBT-3X SBT-5XSBS-250X SBS-500X SBS-1000X SBS-2000X SBS-5000XSBC-0.5X SBC-1X SBC-2X SBC-3X SBH-0.25XSBF-2.25X SBF-4.5X SBF-11.25X SBF-22.5X SBF-45XSBH-0.25X SBH-0.5X SBH-1X SBH-2X SBH-3X SBH-5XTSC-50X TSC-100X TSC-200X TSC-300X TSC-500X TSC-1000XTSB-2000X TSB-3000X TSB-5000XMTB-5X MTB-10X MTB-20X MTB-50X MTB-75X MTB-100X MTB-200X MTB-300X MTB-500XPGD-2X PGD-5X PGD-10X PGD-20X PGD-30X PGD-50XGD-15X GD-20X GD-30X GD-50X GD-100X GD-200X GD-250X GD-300X GD-400X GD-500X0745A-0.22X0745A-0.55X0745A-1.1X0745A-2.2X0745A-4.4X0743-9X0743-13.6X 0743-20X。
STC-500kg传感器
美国Celtron STC-500kg称重传感器【广州洋奕电子】美国Celtron STC-500kg称传感器(中国地区正式一级总代理)，产品原装现货，正品，拥有优势的价格，优质的服务，电话020-******* 5。
美国Celtron STC-500kg称重传感器技术参数：量程/分国内和国外量程(200,250,300,500,750,1K,1.5K,2K,2.5K,3K,5K,7.5K,10K,15K,20K,40K)Ib(25,50,75,100,250,500,750,1000,1500,2000,2500,5000)kg额定输出 3 mV/V±10%零点平衡±1%STC-500kg称重传感器蠕变0.02%（SS;0.03%）输入阻抗385Ω±5Ω滞后性±0.03%R.O.输出阻抗350Ω±3ΩSTC-500kg传感器非线性±0.01%R.O.绝缘阻抗>5000MΩceltron STC-500kg称重传感器重复性±0.03%R.O.加载负荷偏移量<1mm灵敏度温漂0.015%安全载荷150%STC-500kg传感器零点温漂0.026破坏载荷300%推荐激励电压10V AC/DC工作温度范围-10℃~+40℃STC-500kg最大激励电压15V AC/DC STC-500kg温度补偿范围-20℃~+60℃Celtron STC-500kg称重传感器特点与应用：STC-500kg称重传感器不锈钢制品STC-500kg防潮胶密封量程：25~40KlbSTC-500kg传感器综合精度：0.02%celtorn STC-500kg防护等级：IP65NTEP III 5000SIIIL10000STC/STR/HTC S型称重传感器(load cells) S型称重传感器Celtron STC S型称重传感器量程：25-5000KG，250-40Klb合金钢设计,不锈钢可选双向（张力/压缩）Celtron STC-500kg传感器合理化输出NTEP Class III 5000S, lllL10000 认证250lb-20Klb可选功能:调频批准可以使用美国Celtron STC-500kg S型称重传感器应用:机电转换表, 筒仓/漏斗/罐称重,起重机秤,叉车秤,计量/灌装,拉伸/拉力测量美国Celtron STC称重传感器所有型号：STC-5kg STC-10kg STC-25kg STC-50kg STC-75kg STC-100kg STC-250kg STC-500kg STC-750kg STC-1t STC-1.5t STC-2t STC-2.5t STC-5t STC-7.5t STC-10t STC-20tSTC-50kgSS STC-75kgSS STC-100kgSS STC-250kgSS STC-500kgSS STC-750kgSS STC-1t SS STC-1.5Tss STC-2tSS STC-2.5tSS STC-5tSS STC-7.5tSS STC-10TssSTC-50lb STC-100lb STC-150lb .STC-200lb STC-300lb STC-500lb STC- 750lb STC-1Klb STC-1.5Klb STC-2Klb STC-2.5Klb STC-3Klb STC-5Klb STC- 7.5Klb STC-10Klb STC-15Klb STC-30Klb STC-40KlbSTC-50kgXS STC-75kgXS STC-100kgXS STC-250kgXS STC-500kgXS STC-750kgXS广州洋奕电子供应各类国际进口称重传感器、位移传感器、压力传感器、扭矩传感器！我们郑重承诺：“三个月内，不满意或质量问题随时无条件退换货，退还全部货款，不收任何费用，质保一年，两年内随时免费维护”。
Pyxis Lab ST-500 Series Inline PTSA 传感器用户手册说明书
ST-500Series Inline PTSA SensorsUser ManualJanuary 10, 2022Rev.3.08Pyxis Lab,Inc.1729Majestic Dr.Suite5Lafayette,CO80026USA©2017Pyxis Lab,Inc.Table of Contents1Introduction 22Specifications 33Unpacking Instrument 33.1Standard Accessories .........................................33.2Optional Accessories .........................................44Installation 54.1ST-500andST-500RO Piping.....................................54.2ST-500SS Piping ............................................64.3Wiring .................................................74.4Connecting via Bluetooth ......................................76.2Connecting via USB ..........................................125Setup and Calibration withuPyxis®Mobile App85.1Download uPyxis®Mobile App ...................................85.2Connecting to uPyxis®Mobile App .................................95.3Calibration Screen andReading...................................105.4Diagnosis Screen ...........................................115.5Device Info Screen ..........................................116Setup and Calibrationwith uPyxis®Desktop App126.1Install uPyxis®Desktop App .....................................126.3Connecting touPyxis®Desktop App ................................136.4Information Screen ..........................................146.5Calibration Screen ..........................................146.6Diagnosis Screen ...........................................157Outputs 157.14–20mA Output Setup ........................................157.2Adjusting 4–20mA Span .......................................167.3Communication using Modbus RTU .................................178Sensor Maintenanceand Precaution178.1Methods to Cleaning the ST-500Series Sensor ..........................178.2Storage .................................................189Troubleshooting1810Contact Us 19Warranty InformationConfidentialityThe information contained in this manual may be confidential and proprietary and is the property of Pyxis Lab,rmation disclosed herein shall not be used to manufacture,construct,or otherwise reproduce the goods rmation disclosed herein shall not be disclosed to others or made public in any manner without the express written consent of Pyxis Lab,Inc.Standard Limited WarrantyPyxis Lab warrants its products for defects in materials and workmanship.Pyxis Lab will,at its option,repair or replace instrument components that prove to be defective with new or remanufactured components (i.e.,equivalent to new).The warranty set forth is exclusive and no other warranty,whether written or oral, is expressed or implied.Warranty TermThe Pyxis warranty term is thirteen(13)months ex-works.In no event shall the standard limited warranty coverage extend beyond thirteen(13)months from original shipment date.Warranty ServiceDamaged or dysfunctional instruments may be returned to Pyxis for repair or replacement.In some in-stances,replacement instruments may be available for short duration loan or lease.Pyxis warrants that any labor services provided shall conform to the reasonable standards of technical com-petency and performance effective at the time of delivery.All service interventions are to be reviewed and authorized as correct and complete at the completion of the service by a customer representative,or des-ignate.Pyxis warrants these services for30days after the authorization and will correct any qualifying deficiency in labor provided that the labor service deficiency is exactly related to the originating event.No other remedy,other than the provision of labor services,may be applicable.Repair components(parts and materials),but not consumables,provided during a repair,or purchased individually,are warranted for90days ex-works for materials and workmanship.In no event will the in-corporation of a warranted repair component into an instrument extend the whole instrument’s warranty beyond its original term.Warranty ShippingA Repair Authorization(RA)Number must be obtained from Pyxis Technical Support before any product can be returned to the factory.Pyxis will pay freight charges to ship replacement or repaired products to the customer.The customer shall pay freight charges for returning products to Pyxis.Any product returned to the factory without an RA number will be returned to the customer.To receive an RMA you can generate a request on our website at https:///request-tech-support/.Pyxis Technical SupportContact Pyxis Technical Support at+1(866)203-8397,*********************,or by filling out a request for support at https:///request-tech-support/.1IntroductionThe Pyxis ST-500Series inline fluorometer sensor measures the concentration of fluorescence tracer PTSA (pyrenetetrasulfonic acid)in water.The standard ST-001Tee Assembly provided with each ST-500/ST-500RO sensor,has two3/4”female NPT ports and can be placed to an existing3/4”sample water line.Pyxis Lab also offers2”and3”Tee formats for larger flow installations.The4–20mA current output of the ST-500Se-ries sensor can be connected to any controller that accepts an isolated or non-isolated4–20mA input.The ST-500Series sensor is a smart device.In addition to measuring fluorescence,the ST-500Series sensor has an extra photo-electric components that monitors the color and turbidity of the sample water.This extra feature allows automatic color and turbidity compensation to eliminate interference commonly associated with real-world waters.The Pyxis ST-500Series sensor has a short fluidic channel and can be easily cleaned.The fluidic and op-tical arrangement of the ST-500Series sensor is designed to overcome shortcomings associated with other fluorometers that have a distal sensor surface or a long,narrow fluidic cell.Traditional inline fluorometers are susceptible to color,turbidity interference,and fouling,making them very difficult to properly clean.The Pyxis ST-500Series sensor uses a narrow wavelength band gallium phosphide photodiode and high temperature-tolerant and humidity-resistant optical filters.This combination greatly enhances the robust-ness of the sensor.It can be operated under a wide range of ambient conditions without the need of humid-ity and temperature regulation.The performance of the ST-500Series sensor can be stable and consistent for a long period of time.2SpecificationsPyxis’s continuous†See Figure4for ST-500SS dimensions.3Unpacking InstrumentRemove the instrument and accessories from the shipping container and inspect each item for any damage that may have occurred during shipping.Verify that all accessory items are included.If any item is missing or damaged,please contact Pyxis Lab Customer Service at*********************.3.1Standard Accessories•Tee Assembly3/4”NPT(1x Tee,O-ring,and Nut)P/N:ST-001*NOTE*ST-001is not included for ST-500SS•7-Pin Female Adapter/Flying Leads Cable(2ft)P/N:MA-1100•User Manual available online at https:///support/3.2Optional AccessoriesThe following optional accessories can be ordered from Pyxis Customer Service(*******************)or Pyxis E-Store at https:///shop/.Figure1.Figure2.4Installation4.1ST-500and ST-500RO PipingThe provided ST-001Tee Assembly can be connected to a pipe system through the3/4”female ports,either socket or NPT threaded.To properly install the ST-500/ST-500RO sensor into the ST-001Tee Assembly,follow the steps below:1.Insert the provided O-ring into the O-ring groove on the tee.2.Insert the ST-500/ST-500RO sensor into the tee.3.Tighten the tee nut onto the tee to form a water-tight,compression seal.Figure3.Dimension of the ST-500/ST-500RO and the ST-001Tee Assembly(mm)4.2ST-500SS PipingThe ST-500SS sensor has3/4”female NPT threaded ports on the sensor itself and therefore does not require a custom tee assembly.It is recommended that two3/4”NPT to1/4”tubing adapters are used to connect the sensor to the sampling system.Sample water entering the sensor must be cooled down to below120°F(49°C).The sensor can be held by a1.75-inch pipe clamp or mounted to a panel with four1/4-28bolts. See Figure4for ST-500SS dimensions.Figure4.Dimension of the ST-500SS(inch)4.3WiringIf the power ground terminal and the negative4–20mA terminal in the controller are internally connected (non-isolated4–20mA input),it is unnecessary to connect the4–20mA negative wire(green)to the4–20mA negative terminal in the controller.If a separate DC power supply other than that from the controller is used, make sure that the output from the power supply is rated for22–26VDC@65mA.*NOTE*The negative24V power terminal(power ground)and the negative4–20mA ter-minal on the ST-500Series sensor are internally connected.Follow the wiring table below to connect the ST-500Series sensor to a controller:ground4.4Connecting via BluetoothA Bluetooth adapter(P/N:MA-WB)can be used to connect a ST-500Series sensor to a smart phone with the uPyxis®Mobile App or a computer with a Bluetooth/USB Adapter(P/N:MA-NEB)and the uPyxis®Desktop App.The power should be sourced from a24VDC power terminal of a controller.If a controller is not available,please purchase a Pyxis PowerPack-1(P/N:MA-BLE-1)or PowerPack-4(P/N:MA-BLE-4)auxiliary power supply with Bluetooth,or an alternative24V power supply that can directly connect to the ST-500 Series sensor with proper cable connectors from Pyxis.Figure5.7-Pin Sensor with MA-WB and uPyxis Mobile5Setup and Calibration with uPyxis®Mobile App 5.1Download uPyxis®Mobile AppDownload uPyxis®Mobile App from Apple App Store or Google Play.Figure 8. uPyxis® Mobile App installation5.2Connecting to uPyxis®Mobile AppConnect the ST-500Series sensor to a mobile smart phone according to the following steps:1.Open uPyxis®Mobile App.2.On uPyxis®Mobile App,pull down to refresh the list of available Pyxis devices.3.If the connection is successful,the ST-500Series and its Serial Number(SN)will be displayed(Figure8).4.Press on the ST-500Series sensor image.Figure9.5.3Calibration Screen and ReadingWhen connected,the uPyxis®Mobile App will default to the Calibration screen.From the Calibration screen,you can perform calibrations by pressing on Zero Calibration,Slope Calibration,and4-20mA Span. Follow the screen instructions for each calibration step.Figure10.5.4Diagnosis ScreenFrom the Diagnosis screen,you can check the diagnosis condition as well as Export&Upload.This feature may be used for technical support when communicating with*********************.To preform a Cleanliness Check,first select the Diagnosis Condition which defines the fluid type that the ST-500Series sensor in currently measuring,then press Cleanliness Check.If the sensor is clean,a Clean message will be shown.If the sensor is severely fouled,a Dirty message will be shown.In this case,follow the procedure in the Methods to Cleaning the ST-500Series Sensor section of this manual.Figure11.5.5Device Info ScreenFrom the Device Info screen.You can name the Device or Product.Figure 12.6Setup and Calibration with uPyxis®Desktop App6.1Install uPyxis®Desktop AppDownload the latest version of uPyxis®Desktop software package from:https:///upyxis/ this setup package will download and install the Framework4.5(if not previously installed on the PC),the USB driver for the USB-Bluetooth adapter(MA-NEB),the USB-RS485adapter(MA-485), and the main uPyxis®Desktop application.Double click the uPyxis.Setup.exe file to install.Figure 13. 7-Pin Sensor with MA-WB and MA-NEB and uPyxis Desktop6.2 Connec t Wing via USBA USB-RS485adapter(P/N:MA-485)can be used to connect a ST-500Series sensor to a computer with the uPyxis®Desktop App.*NOTE*Using non-Pyxis USB-RS485adapters may result in permanent damage of the ST-500Series sensor communication hardware.Figure14.7-Pin Sensor with MA-485 and uPyxis Destop1.Plug the Bluetooth/USB adapter or USB-RS485 adapter into a USB port in the computer.unch uPyxis® Desktop App.3.OnuPyxis® Desktop App, click Device →Connect via USB-Bluetooth or Connect via USB-RS485 (Fig-ure 14).4.If the connection is successful, the ST-500 Series and its Serial Number (SN) will be displayed in the left pane of the uPyxis® window.*NOTE * After the sensor and Bluetooth is powered up, it may take up to 10 seconds for the adapter to establish the wireless signal for communication.Figure 16.Figure 15. uPyxis® Desktop App installationClick Install to start the installation process. Follow the screen instructions to complete the USB driver and uPyxis® installation.6.3 Connecting to uPyxis® Desktop AppConnect the ST-500 Series sensor to a Windows computer using either a Bluetooth/USB adapter (P/N: MA-NEB) or a USB-RS485 adapter (P/N: MA-485) according to the following steps:6.4 Information ScreenOnce connected to the device,a picture of the device will appear on the top-left corner of the window and the uPyxis®Desktop App will default to the Information screen.On the Information screen you can set the information description for Device Name,Product Name,and Modbus Address,then click Apply Settings to save.Figure17.6.5Calibration ScreenTo calibrate the device,click on Calibration.On the Calibration screen there are three calibration buttons, Zero Calibration,Slope Calibration,and4-20mA Span.The screen also displays the reading of the device. The reading refresh rate is every4seconds.Follow the screen instructions for each calibration step.Figure18.6.6 Diagnosis ScreenAfter the device has been calibrated and installation has been completed,to check diagnosis,click on Diag-nosis.When in the Diagnosis screen you can view the Diagnosis Condition of the device.This feature may be used for technical support when communicating with*********************.To preform a Cleanliness Check,first select the Diagnosis Condition which defines the fluid type that the ST-500Series sensor in sensor is clean,a green Clean message will be shown.will be shown.In thiscase,follow the procedure in of this manual.Figure19.7Outputs7.14–20mA Output SetupThe4–20mA output of the ST-500and ST-500SS sensor is scaled as:•PTSA:–4mA=0ppb–20mA=200ppbThe4–20mA output of the ST-500RO sensor is scaled as:•PTSA:–4mA=0ppb–20mA=40ppb7.2Adjusting4–20mA SpanUsers may adjust the output scale using4–20mA Span to change the PTSA value corresponding to the20mA output via uPyxis®.For the uPyxis®Mobile App,press4-20mA Span found on the Calibration and Reading Screen,shown in Figure18.For the uPyxis®Desktop App,click4-20mA Span found on the Calibration Screen,shown in Figure19.Figure 20.Figure 21.*NOTE*Pyxis accommodates custom requests for ST-500/ST-500SS with ranges up to600.0ppb.7.3Communication using Modbus RTUThe ST-500Series sensor is configured as a Modbus slave device.In addition to the ppb PTSA value,many operational parameters,including warning and error messages,are available via a Modbus RTU connection. Contact Pyxis Lab Customer Service(*********************)for more information.8Sensor Maintenance and PrecautionThe ST-500Series sensor is designed to provide reliable and continuous PTSA readings even when installed in moderately contaminated industrial cooling waters.Although the optics are compensated for the effects of moderate fouling,heavy fouling will prevent the light from reaching the sensor,resulting in low readings and the potential for product overfeed if the ST-500Series sensor is used as part of an automated control system.When used to control product dosing,it is suggested that the automation system be configured to provide backup to limit potential product overfeed,for example by limiting pump size or duration,or by alarming if the pumping rate exceeds a desired maximum limit.The ST-500Series sensor is designed to be easily removed,inspected,and cleaned if required.It is sug-gested that the ST-500Series sensor be checked for fouling and cleaned/calibrated on a monthly basis. Heavily contaminated waters may require more frequent cleanings.Cleaner water sources with less con-tamination may not require cleaning for several months.The need to clean the ST-500Series sensor can be determined by the Cleanliness Check using either the uP-yxis®Mobile App(see the Mobile Diagnosis Screen section)or the uPyxis®Desktop App(see the Desktop Diagnosis Screen section).8.1Methods to Cleaning the ST-500Series SensorAny equipment in contact with industrial cooling systems is subject to many potential foulants and contam-inants.Our inline sensor cleaning solutions below have been shown to remove most common foulants and contaminants.A small,soft bristle brush,Q-Tips cotton swab,or soft cloth may be used to safely clean the sensor housing and the quartz optical sensor channel.These components and more come with a Pyxis Lab Inline Probe Cleaning Solution Kit(P/N:SER-01)which can be purchased at our online E-Store https:///product/st-series-probe-cleaning-kit/Figure 22.Inline Probe Cleaning Solution KitTo clean the ST-500Series sensor,soak the lower half of the sensor in100mL inline sensor cleaning solution for30minutes.Rinse the ST-500Series sensor with distilled water and then check for the flashing blue light inside the ST-500Series sensor quartz tube.If the surface is not entirely clean,continue to soak the ST-500 Series sensor for an additional30m e the small,soft bristle brush and Q-Tips cotton swabs as necessary to remove any remaining contaminants in the ST-500Series sensor quartz tube.8.2StorageAvoid long term storage at temperature over140°F.In an outdoor installation,properly shield the ST-500 Series sensor from direct sunlight and precipitation.9TroubleshootingIf the ST-500Series sensor output signal is not stable and fluctuates significantly,make an additional ground connection—connect the clear(shield,earth ground)wire to a conductor that contacts the sample water electrically such as a metal pipe adjacent to the ST-500Series tee.Carry out routine calibration verification against a qualified PTSA standard.After properly cleaning the ST-500Series sensor,carry out the zero point calibration with distilled water and slope calibration using the qualified PTSA s tandard.Pyxis Lab PTSA Standards can be purchased at our online E-Store https:///product/ptsa-standards/Figure23.PTSA100Standard 10Contact UsPyxis Lab,Inc1729Majestic Dr.Suite5Lafayette,CO80026USAPhone:+1(866)203-8397Email:*********************。
SQB-500kg称重传感器
SQB-500kg称重传感器SQB-500kg称重传感器特性：◆可满足2t～25t量程范围内的精确测量。
◆合金钢材料，表面镀镍，全密封焊接，防油、防水、防一般腐蚀性气体及介质，可适用于多种环境。
◆双剪切梁结构设计，适用于平台秤、配料控制系统、低平台秤、电子汽车衡、轨道衡等各类电子称重设备◆量程：2t～25t◆高精度◆合金钢材料◆安装方便，性能可靠以上内容技术参数以《OIML60号国际建议》92年版为基础，最新具体变化可查看《JJG669—12 Amcells广州南创传感器事业部检定规程》SQB-500kg称重传感器图片SQB-500kg称重传感器SQB称重传感器美国CELTRON称重传感器STCMBBSQBLPSPSD全系列产品MBB梁式称重传感器：MBB-25kg MBB-50kg MBB-75kg MBB-125kg MBB-50 lbMBB-100 lb MBB-150 lb MBB-250 lbCLB梁式：CLB-20K lb CLB-25K lb CLB-40K lb CLB-50K lb CLB-60K lb CLB-75K lb CLB-100K lb CLB-125K lbCSB梁式称重传感器：CSB-5K lb CSB-10K lb CSB-20K lb CSB-30K lb CSB-40K lbLCD轮辐式传感器：LCD-2.5t LCD-5t LCD-10t LCD-25t LCD-50t LCD-60t LCD-100t LCD-150t LCD-5K lb LCD-10K lb LCD-25K lb LCD-50K lb LCD-100K lbPSD轮辐式传感器：PSD-2.5t PSD-5t PSD-10t PSD-25tPSD-H轮辐式传感器：PSD-2.5t PSD-5t PSD-10t PSD-25tMDBMDB-H梁式称重传感器：MDB-10t MDB-20t MDB-25t MDB-30t MDB-40tHCD轮辐式传感器：HCD-2.5t HCD-5t HCD-10t HCD-25t HCD-50t HCD-60t HCD-100t HCD-150t HCD-25K lb HCD-50K lb HCD-100K lbSTC S型SQBSQB-SSSEB HBB MLCD PSD PSD-H MDBMDB-H HCD LPS LOC LE LOC ME HOC DSRDSR-SS DSR-HSS DLB CLB CSB称重传感器SQB-500kg称重传感器型号：SQB/SQB-A/-SS/-ASS称重传感器(适用于平台秤、配料控制系统、低平台秤) 型号：SQB-0.25t SQB-0.3t SQB-0.5t SQB-0.75t SQB-1t SQB-1.5t SQB-2t SQB-2.5tSQB-3t SQB-5t SQB-7.5t SQB-10tSQB-250kg SQB-500kg SQB-750kg SQB-1000kg SQB-1500kg SQB-2000kg SQB-2500kg SQB-3000kg SQB-5000kg SQB-7500kg SQB-10000kgSQB-A-0.25t SQB-A-0.3t SQB-A-0.5t SQB-A-0.75tSQB-A-1t SQB-A-1.5t SQB-A-2t SQB-A-2.5tSQB-A-3t SQB-A-5t SQB-A-7.5t SQB-A-10tSQB-A-250kg SQB-A-500kg SQB-A-750kg SQB-A-1000kg SQB-A-1500kg SQB-A-2000kg SQB-A-2500kg SQB-A-3000kg SQB-A-5000kg SQB-A-7500kg SQB-A-10000kgSQB-SS-0.25t SQB-SS-0.3t SQB-SS-0.5t SQB-SS-0.75tSQB-SS-1t SQB-SS-1.5t SQB-SS-2t SQB-SS-2.5tSQB-SS-3t SQB-SS-5t SQB-SS-7.5t SQB-SS-10tSQB-SS-250kg SQB-SS-500kg SQB-SS-750kg QB-SS-1000kg SQB-SS-1500kg SQB-SS-2000kg SQB-SS-2500kg SQB-SS-3000kg SQB-SS-5000kg SQB-SS-7500kg SQB-SS-10000kgSQB-ASS-0.25t SQB-ASS-0.3t SQB-ASS-0.5t SQB-ASS-0.75tSQB-ASS-1t SQB-ASS-1.5t SQB-ASS-2t SQB-ASS-2.5tSQB-ASS-3t SQB-ASS-5t SQB-ASS-7.5t SQB-ASS-10tSQB-ASS-250kg SQB-ASS-500kg SQB-ASS-750kg SQB-ASS-1000kg SQB-ASS-1500kg SQB-ASS-2000kg SQB-ASS-2500kg SQB-ASS-3000kg SQB-ASS-5000kg SQB-ASS-7500kg SQB-ASS-10000kgSBRB称重传感器(适用于叉车秤、地上衡、配料秤、低平面台秤)SBRB-1t SBRB-2tSQBC-A/-ASS称重传感器(适用于地上衡、配料控制系统、平面台秤) SQBC-A-0.5t SQBC-A-0.75t SQBC-A-1t SQBC-A-1.5t SQBC-A-2t SQBC-A-2.5tSQBC-ASS-0.5t SQBC-ASS-0.75t SQBC-ASS-1t SQBC-ASS-1.5t SQBC-ASS-2t SQBC-ASS-2.5tSQBL-A/-ASS称重传感器(适用于地上衡、配料控制系统、平面台秤) SQBL-A-1t SQBL-A-1.5t SQBL-A-2t SQBL-A-2.5tSQBL-ASS-1t SQBL-ASS-1.5t SQBL-ASS-2t SQBL-ASS-2.5tSQBB-A/-SS-ASS称重传感器(适用于叉车秤、配料控制系统、平面台秤)型号：SQBB-A-0.5t SQBB-A-1t SQBB-A-2tSQBB-SS-0.5t SQBB-SS-1t SQBB-SS-2tSQBB-ASS-0.5t SQBB-ASS-1t SQBB-ASS-2t。
STC-500kg称重传感器
STC-500kg传感器_美国Celtron STC-500kg称重传感器广州洋奕内部资料STC-500kg称重传感器Celtron STC-500kg称重传感器特点与应用：STC-500kg称重传感器不锈钢制品STC-500kg防潮胶密封量程：25~40KlbSTC-500kg传感器综合精度：0.02%celtorn STC-500kg防护等级：IP65NTEP III 5000SIIIL10000STC/STR/HTC S型称重传感器(load cells)S型称重传感器Celtron STC S型称重传感器量程：25-5000KG，250-40Klb 合金钢设计,不锈钢可选双向（张力/压缩）Celtron STC-500kg传感器合理化输出NTEP Class III 5000S, lllL10000 认证250lb-20Klb可选功能:调频批准可以使用美国Celtron STC-500kg S型称重传感器应用:机电转换表, 筒仓/漏斗/罐称重,起重机秤,叉车秤,计量/灌装,拉伸/拉力测量美国Celtron STC称重传感器所有型号：STC-5kg STC-10kg STC-25kg STC-50kg STC-75kg STC-100kg STC-250kg STC-500kg STC-750kg STC-1t STC-1.5t STC-2t STC-2.5t STC-5t STC-7.5t STC-10t STC-20tSTC-50kgSS STC-75kgSS STC-100kgSS STC-250kgSS STC-500kgSS STC-750kgSS STC-1t SSSTC-1.5Tss STC-2tSS STC-2.5tSS STC-5tSS STC-7.5tSS STC-10TssSTC-50lb STC-100lb STC-150lb .STC-200lb STC-300lb STC-500lb STC-750lb STC-1Klb STC-1.5Klb STC-2Klb STC-2.5Klb STC-3Klb STC-5Klb STC-7.5Klb STC-10Klb STC-15Klb STC-30Klb STC-40KlbSTC-50kgXS STC-75kgXS STC-100kgXS STC-250kgXS STC-500kgXS STC-750kgXS3。
梅特勒托利多传感器,托利多称重传感器
梅特勒托利多传感器,托利多称重传感器,梅特勒传感器【广州兰瑟★电子】内部培训资料0743-不锈钢激光焊接防爆密封传感器9,13.6,20.4t20,30,45klb0745/0745A-不锈钢激光焊接防爆密封传感器220kg,550kg,1.1t,2.2t,4.4t/500,1000,2500,5000,10.000lbMTB-不锈钢激光焊接防爆密封传感器5,10,20,50,100,200,500kgSB-合金钢材质，表面镀镍300,500kg,1,2,3,5,10,15,20tSBC-优质合金钢表面镀镍500,1000,2000kgSBH-不锈钢激光焊接密封传感器250,500,1000,2000,3000,5000kgSBI-超低安装250kgSBS-优质合金钢表面镀镍，螺纹联接300,500kg,1,2,3tSBT-优质合金钢表面镀镍，通孔300,500kg,1,2,3,5t罐/环梅特勒托利多称重传感器称重范围最大达到几百吨。
具有OIML、NTEP全球计量认证和危险区域应用的ATEX、FM 防爆认证。
托利多称重传感器0782/GD–不锈钢，IP6815,20,30,50,100,200,300t高温传感器GD(G)可广泛应用于冶金、钢铁、石油、化工等多种领域。
GD-AOC-4-20mA输出15,20,30,50,100tPGD–不锈钢，全密封2,5,10,20,30,50tPGD-AOC-4-20mA输出2,5,10,20,30,50tPOWERCELL MTX数字式传感器25t,45tPOWERCELL–不锈钢，IP68/IP69K90t/200klbRB–超低外形、全密封结构1tSBF–采用剪切梁原理的超低外形称重传感器5,10,25,50,100klbSLC610-不锈钢，密封，防爆英文版7.5-22.5t16.5-49.6klbS型/拉式梅特勒托利多称重传感器【广州兰瑟★电子】内部培训资料量程从几十千克到几吨。
称重传感器的原理及应用
称重传感器的原理及应用来源：赛斯维传感器网发表于 2010-9-7称重传感器的原理及应用随着技术的进步,由称重传感器制作的电子衡器已广泛地应用到各行各业,实现了对物料的快速、准确的称量，特别是随着微处理机的出现，工业生产过程自动化程度化的不断提高，称重传感器已成为过程控制中的一种必需的装置，从以前不能称重的大型罐、料斗等重量计测以及吊车秤、汽车秤等计测控制，到混合分配多种原料的配料系统、生产工艺中的自动检测和粉粒体进料量控制等，都应用了称重传感器，目前，称重传感器几乎运用到了所有的称重领域。
1．高速定量分装系统本系统由微机控制称重传感器的称重和比较，并输出控制信号，执行定值称量，控制外部给料系统的运转，实行自动称量和快速分装的任务。
系统采用MCS-51单片机和V/F电压频率变换器等电子器件，其硬件电路框图如图1所示，用8031作为中央处理器，BCD拔码盘作为定值设定输入器，物料装在料斗里，其重量使传感器弹性体发生变形，输出与重量成正比的电信号，传感器输出信号经放大器放大后，输入V/F转换器进行A/D转换，转换成的频率信号直接送入8031微处理器中，其数字量由微机进行处理。
微机一方面把物重的瞬时数字量送入显示电路，显示出瞬时物重，另一方面则进行称重比较，开启和关闭加料口、放料于箱中等一系列的称重定值控制。
图1 原理框图在整个定值分装控制系统中，称重传感器是影响电子秤测量精度的关键部件，选用GYL-3应变式称重测力传感器。
四片电阻应变片构成全桥桥路，在所加桥压U不变的情况下，传感器输出信号与作用在传感器上的重力和供桥桥压成正比，而且，供桥桥压U的变化直接影响电子称的测量精度，所以要求桥压很稳定。
毫伏级的传感器输出经放大后，变成了0-10V 的电压信号输出，送入V/F变换器进行A/D转换，其输出端输出的频率信号加到单片机8031定时器1的计数、输入端T1上。
在微机内部由定时器0作计数定时，定时器0的定时时间由要求的A/D转换分辩率设定。
称重传感器型号及参数【齐全】
下面就一一介绍称重传感器种类，型号及适用范围，跟着小编一起来看看吧！（一）桥式结构传感器1、QS/QS-A称重传感器，适用于汽车衡、轨道衡、配料秤等。
型号有：QS-5t，QS-10t，QS-15t，QS-20t，QS-25t，QS-30t，QS-40t，QS-50t。
QS-A-5t，QS-A-10t，QS-A-15t，QS-A-20t，QS-A-25t，QS-A-30t，QS-A-40t，QS-A-50t。
2、QSB-A/-SS称重传感器，适用于汽车衡、轨道衡、轴量秤、地上衡、仓储秤等。
型号有：QSB-A-10klb，QSB-A-20klb，QSB-A-25klb，QSB-A-40klb，QSB-A-50klb，QSB-A-60klb，QSB-A-75klb。
QSB-SS-10klb，QSB-SS-20klb，QSB-SS-25klb，QSB-SS-40klb，QSB--SS-50klb，QSB-SS-60klb，QSB-SS-75klb。
3、QSC-A/-SS称重传感器，适用于汽车衡、轨道衡、轴量秤、地上衡、仓储秤等。
QSC-A-5klb，QSC-A-10klb，QSC-A-20klb，QSC-A-25klb，QSC-A-30klb，QSC-A-50klb，QSC-A-60klb，QSC-A-75klb，QSC-A-100klb。
QSC-SS-5klb，QSC-SS-10klb，QSC-SS-20klb，QSC-SS-25klb，QSC-SS-30klb，QSC-SS-50klb，QSC-SS-60klb，QSC-SS-75klb，QSC-SS-100klb。
4、QSF-A/-SS称重传感器，适用于汽车衡、轨道衡、轴量秤、地上衡、仓储秤等。
型号有：QSF-A-2klb，QSF-A-2.5klb，QSF-A-3klb，QSF-A-5klb，QSF-A-10klb，QSF-A-25klb，QSF-A-35klb。
称重传感器的原理及应用
称重传感器的原理及应用来源：赛斯维传感器网发表于 2010-9-7称重传感器的原理及应用随着技术的进步,由称重传感器制作的电子衡器已广泛地应用到各行各业,实现了对物料的快速、准确的称量，特别是随着微处理机的出现，工业生产过程自动化程度化的不断提高，称重传感器已成为过程控制中的一种必需的装置，从以前不能称重的大型罐、料斗等重量计测以及吊车秤、汽车秤等计测控制，到混合分配多种原料的配料系统、生产工艺中的自动检测和粉粒体进料量控制等，都应用了称重传感器，目前，称重传感器几乎运用到了所有的称重领域。
1．高速定量分装系统??? 本系统由微机控制称重传感器的称重和比较，并输出控制信号，执行定值称量，控制外部给料系统的运转，实行自动称量和快速分装的任务。
??? 系统采用MCS-51单片机和V/F电压频率变换器等电子器件，其硬件电路框图如图1所示，用8031作为中央处理器，BCD拔码盘作为定值设定输入器，物料装在料斗里，其重量使传感器弹性体发生变形，输出与重量成正比的电信号，传感器输出信号经放大器放大后，输入V/F转换器进行A/D转换，转换成的频率信号直接送入8031微处理器中，其数字量由微机进行处理。
微机一方面把物重的瞬时数字量送入显示电路，显示出瞬时物重，另一方面则进行称重比较，开启和关闭加料口、放料于箱中等一系列的称重定值控制。
图1 原理框图在整个定值分装控制系统中，称重传感器是影响电子秤测量精度的关键部件，选用GYL-3应变式称重测力传感器。
四片电阻应变片构成全桥桥路，在所加桥压U不变的情况下，传感器输出信号与作用在传感器上的重力和供桥桥压成正比，而且，供桥桥压U的变化直接影响电子称的测量精度，所以要求桥压很稳定。
毫伏级的传感器输出经放大后，变成了0-10V的电压信号输出，送入V/F变换器进行A/D转换，其输出端输出的频率信号加到单片机8031定时器1的计数、输入端T1上。
在微机内部由定时器0作计数定时，定时器0的定时时间由要求的A/D转换分辩率设定。
HSX-A-500KG称重传感器
HSX-A-500KG称重传感器
HSX-A-500KG称重传感器产品简介：
量程：5㎏～500kg；高精度；合金钢、不锈钢材料；合金钢材料，波纹管焊接，内部灌胶密封,防油、防水、耐腐蚀，可适用于各种环境。
体积小巧，外型美观；单点式结构设计，安装使用方便灵活，适用于料斗秤、皮带秤、配料系统、电子吊钩秤、机改秤、料斗秤等各类电子称重设备，安全防爆型产品，可用于恶劣环境及危险性场合。
HSX-A-500KG称重传感器皮带秤系统图：
HSX-A系列量程：
HSX-A-5kg,HSX-A-10kg,HSX-A-20kg,HSX-A-30kg,HSX-A-40kg,HS X-A-50kg,HSX-A-75kg,HSX-A-100kg,HSX-A-150kg,HSX-A-200kg,H
SX-A-250kg,HSX-A-300kg,HSX-A-500kg
HSX-5kg,HSX-10kg,HSX-20kg,HSX-30kg,HSX-40kg,HSX-50kg,HSX-75kg,HSX-100kg,HSX-150kg,HSX-200kg,HSX-250kg,HSX-300kg,HS X-500kg；
HSX-A-500KG称重传感器技术参数：。