BDT61-S中文资料
T61中文说明书
;wg4Jdw,S=g4eyMFcz1a"H# kpCJdwZ9C1kmeNN?;S%#Pp9 C;wg4Jdw!/#g{kme$1dS%,4 9tEB~2I\FK$t#
ThinkPad® T61 ,$kJOl^8O
ThinkPad® T61 ,$kJOl^8O
" Z9C>JO0d'VDz7.0,kqXDATBE": v Lr|Pk>vfo;pa)D62+k#^8O7# v *z Access Help PD^_`XE"MZ 59 3D=< D, :yw;# v Lr|Pk>vfo;pa)Du}yw#
F/Fcz0,7#g48>FQ(p#byPzZ @92L}/wp5M}]*'#
kp$d"2w"NA"$z"wr"p/"79F cz"T>ArbSh8,2;*ZOfECXo#
k9Ca)c;DfM#$DEJc/|#kp+F czEZ{C\zDd|P#
vi ThinkPad® T61 ,$kJOl^8O
kHDA 9:e6kFczTbC&=FczO,,19Fc z6kP.DX=T\bgw#U#
© Copyright Lenovo 2007
v
kHDA
}7<C;wg4Jdw"sj"|L"r!zrN Nd{gSh8DgBr(EgB,9|G;a;H $";am9K,;a\=Fczrd{oeD7 9,2;aTNN==A-FczDKP#TgB) &}sI\ap5r*OgB#
紧固件选用手册.(DOC)
前言为规范无锡大阳电动科技有限公司电动车紧固件的选用，并结合公司PLM要求特编制了本《紧固件选用手册》，依据现实际和发展的需要，手册中选录有螺栓类、螺钉类、螺母类、垫圈类、销轴类、企标类共六大类54小类的紧固件，供大家使用。
在使用中各位对本手册有什么意见和建议，请随时向技术中心反映。
本手册编制人:编制说明1 本选用手册是依据本公司电动车对紧固件的使用情况编制。
2 紧固件的表面处理镀锌件按GB/T 9799-2011《金属及其他无机覆盖物钢铁上经过处理的锌电镀层》，其余按GB/T 13911-2008《金属镀覆和化学处理标识方法》的规定表示:1） Fe/Zn/B—表示钢件电镀锌后漂白铬酸盐处理(漂白膜) （外观为带轻微彩虹的白色或蓝白色）；2) Fe/Zn/C—表示钢件电镀锌后彩虹铬酸盐处理(彩虹膜) （外观为偏黄的彩虹色）；3） Fe/Zn/D—表示钢件电镀锌后军深色铬酸盐处理(不透明膜) （外观为橄榄绿，也称军绿）；4） Fe/Zn/F—表示钢件电镀锌后黑色铬酸盐处理(黑色膜) （外观为黑色）；5） Fe/Cr20b—表示钢件电镀铬处理, 光亮镀铬,镀镍层厚20μm,镀铬层厚0.3μm；6） Ct.O—表示钢件进行化学氧化处理（发蓝或发黑），本公司规定只采用发黑，以后标准件中凡是采用Ct.O又未注明颜色的，均按发黑处理；7）镀锌件铬酸盐处理后须进行封闭处理（T2），为了简化起见，代号标记里未作标注。
3 电镀层厚度要求：1）电镀锌如不标注镀层厚度，则镀锌层厚度应达到12μm 以上；2）电镀铬如不标注镀层厚度，则镀层总厚度应达到20μm 以上；3）采购部订购紧固件时应按此要求采购，品管部按此要求验收。
4 紧固件的标注按各种紧固件的标注示例进行，标准代号一律不标年份。
5.“○”符号为我司正常使用规格。
1）大类:见表1.表12）小类:见表2.表2（续）表2（续）3）直径规格a) 一般按紧固件的直径规格，用2位数表示；b) 细牙螺纹：同一直径规格有不同螺距时，按表3规定。
拓斯达 辅机系统 高端智能装备产品说明书
作为中国整厂自动化第一品牌，拓斯达专注于高端智能装备，主张 的品牌价值，即随着技术不断进步与突破，用智能系统替代人工，开拓可替代的应用领域，推动产业进步助力企业发展，同时把制造业从劳动密集型带入完全的自动化，回归到自然，人性，和谐的状态。
新出现的文明与传统的旧工业文明有许多矛盾之处：它既有高度的科学技术，同时又是反工业化的。
As the top brand of complete factory automation in China, TOPSTAR focuses on high-end innovative equipment, proposes the brand value of. We initiate to replacelabor with intelligent systems, expand replaceable application areas and promote industrial progress to help enterprise developing, transform labor intensive type to full automation and return to a natural, human-oriented and harmonious status.Much in this emerging civilization contradicts the old traditional industrial civilization. It is, at one and the same time, highly technological and anti-industrial.摘自《第三次浪潮》——阿尔文·托夫勒from The Third Wave,Alvin Toffler企业简介Guangdong Topstar Technology Co., Ltd.（SZ.300607）is a National High-Tech Enterprise, focusing on the development of industrial robots, manufacturing and sales, dedicated to systems integration, products manufacturing and software development--three in one integration of industrial robot ecosystems and overall automation solution.Since the establishment in 2007, adhering to the brand advocate "Let Industrial Civilization Return To The Natural Beauty” and the core value "one year investment return for the automation solution", the business has maintained a rapid growth. In 2015, Topstar was named “China Industrial Automation Leading Enterprise” by the State Ministry of Information Industry Development Institute. We have served about 4000 customers in domestic and oversea market, including well-known companies from Global 500. Now our sales and service network are all over the country in China and the products have been exported to more than 30 countries in Asia, America, Europe, Africa, etc.In 2014, we were ranked on the 30th as "Potential 100 Non-Listed Chinese Enterprises" by Forbes. In 2015, we were named "China's Most Potential Enterprise" by Ernst & Young with Fudan University, at the same time won the Guangdong Provincial-level Enterprise Technical Center, the Rapid Growth of Small&Medium Enterprises of Guangdong Province, and as the only one robot enterprise selected in Guangdong Province Manufacturing 500, honored “2014 and 2015Annual Golden Globe” by GG Robots, etc. In 2016, was assessed as the first batch of robot key enterprises in Guangdong Province. Our enterprise is highly appreciated by national ministries , provincial and municipal leaders.At present, our shareholders include China Huarong, top PE Shenzhen Fortune Capital, Industrial Securities and Dongguan Sangem Group.Topstar has recruited top R&D experts from Canada, Korea and Taiwan, and carried out long-term research cooperation with Tsinghua University, Huazhong University of Science and Technology, South China University of Technology, Dongguan Institute of Technology and other research institutions and well-known colleges. We have achieved 100 national patents and 10 software copyrights.Three kinds of Robots with independent intellectual property were named Guangdong Provincial Famous Brand and five kinds of machines were named Guangdong High-Tech Products. Many machines have been certified by CE.Company profile广东拓斯达科技股份有限公司（SZ.300607）是国家级高新技术企业，专注于工业机器人的研发、制造、销售，致力于打造系统集成 + 本体制造 + 软件开发三位一体的工业机器人生态系统和整体自动化解决方案。
步进电机驱动控制系统
* 外型尺寸 单位（m m ） A.....32(H)X50(W)X80(D)
*3 采用 PLC 控制 RC-207A/231（HA）时，可预先将程序通过微机输入 EEPROM 内， 而不需要后备电池保持。
B.....27.5(H)X105(W)X56(D) C.....63(H)X105(W)X56(D)
2 1M 8 8 B ◎ ◎ ◎ ◎ ●
可高可可可通贮速先过检由存的将两测软11振程台步件0100000荡序相进设000频输连电定个率入，机加位可后的减可置达，失速以点到步再时进数。脱间行2据M离。P2约约，P轴计S88由。00同算00外步机部运独通行立过。运简作单（的内命贮令E进EP行RO11111111111控M22222222222）33333333311331111111111111111111111111111111111制。4444444442222222222222222222222222222222222244255555555533333333333333333333333333333333333553。666666666444444444444444444444444444444444446647711155555555555555555555555555555555555117777777775222223333344444
南京展示厅：中山北路１０５号山西电子市场二楼４５号（军人俱乐部内） ０２５－８３３０４１１２ 无锡展示厅：北大街 ２５ 号招商城电子市场 １ 区 １０７ 柜 ０５１０－ 上海科技京城电子市场（北京东路 ６６８ 号）地下一层 Ａ３９ 室 ０２１－５３０８５０８６ 上海晶滩电子市场 １Ｓ１２ 号（北京东路 ７３１ 号） ０２１－６３６１１８０６ 上海外滩电子名品城 ２３２ 室（西藏南路 ７５０ 号） ０２１－６３２６２１０２
新波电子产品介绍书说明书
UMR SeriesPrecision, Double-Row BallBearing Linear StagesShown with optional M-PBN Base Plate. Order actuators and base plates separately.UMR Series Linear Stages feature steel construction for high stability and rigidity . The ball bearings and precision-ground bearing surfaces provideexceptional linear travel, with angular deviation better than 100-200 µrad. UMR3,UMR5, and URM8 Series stages have double-row ball bearings making them an excellent choice for carrying high loads. UMR12 Series stages contain a single row of ball bearings. In all UMR stages, the moving carriage is preloaded by two springs to ensure constant micrometer contact for smooth, backlash-free motion.Four stage sizes, each available in several travel ranges , allow you to closely match both your physical and performance requirements. UMR5, UMR8, and UMR12 have aperture versions available with a clear hole through the carrier and stage body. Apertures are very useful for positioning of optics, fiber optics,or cabled devices.M-UMR12.4AM-UMR8.51AM-UMR8.25AM-UMR5.25AM-UMR5.16AUMR stages are available with clear apertures for demanding applications. Actuators sold separately.Key Features•0.16–3.15 in. (4–80 mm) of travel •Low-profile design•Steel construction for high stability and rigidity•Double-row ball bearings for higher load capacity (except UMR12)•Angular deviation better than 100–200 µrad•Threaded micrometer mountingMultiple drive options cover the range of precision positioning. Standard BM Series micrometers provide 1 µm sensitivity, while BD Series differential micrometers offer 0.1 µm. For ‘set, lock, and leave’ applications a fixedpositioning kit replaces the micrometer with two opposing adjustment screws and lock nuts. An optional carriage locking kit includes a screw that mounts in the stage body opposite the micrometer. Motorized or electrostrictive actuators can be added for precision motion control.Generous hole patterns allow great flexibility in component placement on the stage mounting surface. Two stages can be easily stacked in an XY configuration and mounted to a table or breadboard (M-PBN mounting base required, except UMR8 and UMR12). Multi-axis stage configurations are easily assembled using EQ Series angle brackets. UMR stages are compatible with UTR and URM rotation stages, BGM goniometers, and SL and SK mirror mounts.SpecificationsUMR3.5 (M-UMR3.5)UMR5.16 (M-UMR5.16)UMR5.25 (M-UMR5.25)UMR8.25 (M-UMR8.25)UMR8.51 (M-UMR8.51)UMR12.40 (M-UMR12.40)UMR12.63 (M-UMR12.63)UMR12.80 (M-UMR12.80)Two UMR5.25 stages with a UTR rotation stage.Model (Metric)Angular Deviation(µrad)Load Capacity [lb (N)]UMR3 (M-UMR3)<100135 (600)UMR5 (M-UMR5)<200135 (600)UMR8 (M-UMR8)<200202 (900)UMR12 (M-UMR12)<20090 (400)Load CharacteristicsRelated Products•M-PBN Base Plates •UTR Rotation Stages•EQ Series Angle BracketsMounting Bridles aid in constructing complex systems (see the Accessories Section).Multi-axis stage configurations are easily assembled using UMR stages and EQ Series angle brackets.Q Off-center load, Q ≤Cz/(1 + D/a)Cz Centered normal load capacity D Cantilever distance in mm a Bearing constant-Cx Axial load capacity in the direction toward the actuator+Cx Axial load capacity in the direction away from the actuator ωDrive torque for +Cx = 10 N k αx Angular stiffness (roll)k αy Longitudinal stiffness (pitch)k αzTransverse stiffness (yaw)Model (Metric)Cz (N)+Cx (N)-Cx (BM)(N)-Cx (DM)(N)a (mm)ω(Nm)K αx (mrad/Nm)K αy (mrad/Nm)K αz (mrad/Nm)UMR3.5 (M-UMR3.5)600104030200.040.70.30.5UMR5.5 (M-UMR5.5)600124030220.050.10.20.2UMR5.16 (M-UMR5.16)600154030220.050.10.20.2UMR5.25 (M-UMR5.25)600114030220.050.10.20.2UMR8.4 (M-UMR8.4)9001810050400.070.050.050.05UMR8.25 (M-UMR8.25)9001710050400.070.050.050.05UMR8.51 (M-UMR8.51)90011100400.070.050.050.05UMR12.40 (M-UMR12.40)40035450700.080.020.020.02UMR12.63 (M-UMR12.63)40025450700.080.020.020.02UMR12.80 (M-UMR12.80)40020450700.080.020.020.02Whatever size you need, Newport has a stage for your application.Ordering InformationActuators must be ordered separately, please see below for specificActuator/Stage combinations. Please see the Manual Actuators Section for detailed information.* For 40 nm minimum incremental motion, this stage is compatible with the AD-30 when used with a motorized actuator adaptor as listed below.✝Motorized actuators require an adaptor for mounting on UMR stages. Order one adaptor from the list below for each motor and stage used.For UMR8, use ADAPT-BM17-375For UMR12, use ADAPT-BM25-375‡For fixed positioning applications, order 2 each of the corresponding carriage locks.For Vacuum Compatibleversions (50% price premium at time of order), append “V6” to the part number (eg. UMR3.5V6).Two UMR stages with an SL optical mount.Model (Metric)Travel [in.(mm)]Actuator Sensitivity Motorized Actuator FixedPositioning Kit Carriage LockBase Plate1 µm0.1 µmUMR3 SeriesUMR3.5 (M-UMR3.5)0.20 (5)BM11.5DM11-5FP3-5CL3-5M-PBN3UMR5 SeriesUMR5.5 (M-UMR5.5)0.20 (5)BM11.5DM11-5‡CL6-5M-PBN5UMR5.16 (M-UMR5.16)0.63 (16)BM11.16DM11-16‡CL6-16M-PBN5UMR5.16A (M-UMR5.16A)0.63 (16)UMR5.25 (M-UMR5.25)0.98 (25)BM11.25DM11-25‡CL6-25M-PBN5UMR5.25A (M-UMR5.25A)0.98 (25)UMR8 SeriesUMR8.4 (M-UMR8.4)0.16 (4)BM17.04N DM17-4*‡CL12-4M-PBN8UMR8.25 (M-UMR8.25)0.98 (25)BM17.25DM17-25LTA Series ✝‡CL12-25M-PBN8UMR8.25A (M-UMR8.25A)0.98 (25)UMR8.51 (M-UMR8.51) 2.01 (51)BM17.51LTA Series ✝‡CL12-51M-PBN8UMR8.51A (M-UMR8.51A) 2.01 (51)UMR12 SeriesUMR12.40 (M-UMR12.40) 1.57 (40)BM25.40LTA Series ✝FP18-40CL18-40M-PBN12UMR12.40A (M-UMR12.40A) 1.57 (40)UMR12.63 (M-UMR12.63) 2.48 (63)BM25.63FP18-63CL18-63M-PBN12UMR12.80 (M-UMR12.80)3.15 (80)BM32.80FP22-80CL22-80M-PBN12Model UMR3.52 HOLES,C ’BORED FOR THD A CLR,UMR5 SeriesE SPACING(UMR 5.5/5.16 ONLY)THD A CLR, .79 (20)BOTH SIDESUMR5A Series2 holes, M3 thd, B spacing.Model UMR8.4/8.251.34 (34)THD,ThreadDimension [in. (mm)]Model (Metric)A B C UMR3.5 (M-UMR3.5)4-40 (M3)8-32 (M4)0.500 (12.5)Thread Dimension [in. (mm)]Model (Metric)A B C D EFG H UMR5.5 (M-UMR5.5)4-40 (M3)8-32 (M4)1/4-20 (M6)0.500 (12.5) 1.000 (25.0) 2.000 (50.0) 1.77 (45) 2.28 (58)UMR5.16 (M-UMR5.16)4-40 (M3)8-32 (M4)1/4-20 (M6)0.500 (12.5) 1.000 (25.0) 2.000 (50.0) 1.26 (32) 2.28 (58)UMR5.25 (M-UMR5.25)4-40 (M3)8-32 (M4)1/4-20 (M6)0.500 (12.5)1.000 (25.0)2.000 (50.0)1.26 (32)2.68 (68)Thread Dimension [in. (mm)]Model (Metric)A B C D EUMR5.16A (M-UMR5.16A)8-32 (M4) 1.000 (25.0) 2.000 (50.0) 2.283 (58.0) 1.181 (30.0)UMR5.25A (M-UMR5.25A)8-32 (M4)1.000 (25.0)2.000 (50.0)2.677 (68.0)1.535 (39.0)Model UMR8.51UMR8A SeriesThreadDimension [in. (mm)]Model (Metric)A B C D E UMR8.4 (M-UMR8.4)8-32 (M4)1/4-20 (M6) 1.000 (25.0) 3.000 (75.0) 2.52 (64)UMR8.25 (M-UMR8.25)8-32 (M4)1/4-20 (M6) 1.000 (25.0) 3.000 (75.0)2.09 (53)UMR8.51 (M-UMR8.51)8-32 (M4)1/4-20 (M6)1.000 (25.0)3.000 (75.0)Thread Dimension [in. (mm)]Model (Metric)A B C D E F G UMR8.25A (M-UMR8.25A)1/4-20 (M6) 1.000 (25.0) 2.000 (50.0) 3.000 (75.0) 4.000 (100.0) 3.622 (92.0) 2.087 (53.0)UMR8.51A (M-UMR8.51A)1/4-20 (M6)1.000 (25.0)2.000 (50.0)3.000 (75.0)4.000 (100.0)4.646 (118.0)3.110 (79.0)UMR12 Series1.89 (48)THD B CLR, D SPACINGModel UMR12.40AModel ADAPT-BM17-375Model ADAPT-BM25-375See our website for CAD filesCADThread Dimension [in. (mm)]Model (Metric)A B C D E FUMR12.40 (M-UMR12.40)10-24 (M5)1/4-20 (M6)M18 x 1 1.000 (25.0) 5.65 (143.5)UMR12.63 (M-UMR12.63)10-24 (M5)1/4-20 (M6)M18 x 1 1.000 (25.0) 6.56 (166.5)UMR12.80 (M-UMR12.80)10-24 (M5)1/4-20 (M6)M22 x 11.000 (25.0)8.29 (210.5)1.38 (35)ThreadDimension [in. (mm)]Model (Metric)A B CUMR12.40A (M-UMR12.40A)1/4-20 (M6)10-24 (M5) 1.000 (25.0)。
6783 车载导航电路图
层次:1子件品号子件品名组成量单位JYT-TS6783-NAAB主件品号:品 名: 6.2寸数字屏\诺威达\日产奇俊\DVD+BT+GPS 2009-8-5备 注:制作日期:审核日期:2010-3-10备注BC1-TS6783-9001包装料\珍珠棉(上)\300X276X75MM PCS 1.00 BC1-TS6783-9002包装料\珍珠棉(下)\300X276X70MM PCS 1.00 BC1-TS7892-9003包装料\珍珠棉(前)\290X60X30MM PCS 1.00 BC3-000000-AAAB 包装材料\说明书\诺威达\中文中性PCS 1.00 BC4-000000-0016包装材料\贴纸类\功能贴\205X98.5MM PCS 2.00 BC4-000000-0017包装材料\贴纸类\车型贴\170X42.5MM PCS 2.00BC4-000000-0018包装材料\银色贴纸\单面备胶\17X12X0.1MM PCS 2.00贴于主机的五金面盖上的防震螺丝孔处BC4-000000-0110包装材料\主机贴纸\12V\英文中性PCS 1.00底盖BC4-000000-0AA0包装材料\贴纸类\封条贴纸\通用型PCS 1.00可打印BC4-TD5911-0AA0包装材料\贴纸\蓝牙功能贴纸\20X10MM PCS 2.00 BC4-TD5911-0AA1包装材料\贴纸\蓝牙外箱贴纸\58X30MM PCS 1.00BC5-000000-0001包装材料\牛皮纸配件盒\140X200X55MM PCS 1.00线材，其它包装附件BC5-000000-0002包装材料\牛皮纸配件盒\140X45X220MMPCS 1.00说明书，其它包装附件BC5-000000-VAAA 包装材料\彩盒\4S 专供\牛皮纸箱\305X285X215MM PCS 1.00 BC6-155238-0001包装材料\说明书胶袋\PVC 155X238X0.04MM\印绿色环保标志PCS 1.00 BC6-155238-0002包装材料\输出线胶袋\PVC 155X238X0.04MM\印绿色环保标志PCS 1.00 BC6-155238-0003包装材料\附件胶袋\155X238X0.04MMPCS 1.00 BC6-310365-0001包装材料\包机胶袋\PVC 310X365X0.04MM\印绿色环保标志PCS 1.00 BC7-000000-FAA0包装材料\卡通箱\63.5X44X30.5CMPCS .251/4台装BC8-000000-0020包装材料\其它类\AUX-OUT 吊牌\30X15MM(PVC 片)黑色PCS 1.00英文BC8-000000-0A01包装材料\其它类\倒车雷达线吊牌\30X15MM(PVC 片)橙色PCS 1.00英文BC8-000000-0AA0包装材料\其它类\GND 地线吊牌\黑色PCS 1.00英文BC8-000000-0AA1包装材料\其它类\倒车视频输入吊牌\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AA2包装材料\其它类\AUX 视频输入吊牌2\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AA3包装材料\其它类\AUX 视频输入吊牌1\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AA4包装材料\其它类\视频输出吊牌\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AA5包装材料\其它类\前RCA 输出吊牌\30X15MM(PVC 片)PCS 1.00英文层次:1子件品号子件品名组成量单位JYT-TS6783-NAAB主件品号:品 名: 6.2寸数字屏\诺威达\日产奇俊\DVD+BT+GPS 2009-8-5备 注:制作日期:审核日期:2010-3-10备注BC8-000000-0AA6包装材料\其它类\后RCA 输出吊牌\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AA7包装材料\其它类\AUX 音频输入吊牌\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AA8包装材料\其它类\遥控输入吊牌\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AA9包装材料\其它类\方向盘按键控制线吊牌1\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AAA 包装材料\其它类\方向盘按键控制线吊牌2\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AAB 包装材料\其它类\方向盘按键控制负极线吊牌\30X15MM(PVC 片)PCS 1.00英文BC8-000000-0AAC 包装材料\其它类\防潮珠PCS 1.00 BC8-000000-1AA0包装材料\其它类\手刹线吊牌\30X15MM(PVC 片)棕色PCS 1.00英文BC8-000000-2AA0包装材料\其它类\ACC 点火线吊牌\红色PCS 1.00英文BC8-000000-2AA1包装材料\其它类\机芯防震警示牌\红色PCS 1.00英文BC8-000000-3AA0包装材料\其它类\ILL 照明线吊牌\橙色PCS 1.00英文BC8-000000-4AA0包装材料\其它类\记忆电源线吊牌\黄色PCS 1.00英文BC8-000000-6AA0包装材料\其它类\ANT 自动天线吊牌\蓝色PCS 1.00英文BC8-TD6772-0001包装材料\保修卡\150X125MM PCS 1.00BZ1-000005-0004标准件\弹介\Φ5\T=1.00MM PCS 1.00吊装螺丝（包装附件）BZ1-005004-0003标准件\六角螺母\M5.0X4mm\镀彩锌PCS 1.00吊装螺丝（包装附件）BZ1-005010-0008标准件\平介子\φ5.0X φ10X0.9mm\镀彩锌PCS 1.00吊装螺丝（包装附件)BZ1-BM5006-0003标准件\盘头\机牙\BM5.0X6MM\镀彩锌\十字型PCS 4.00包装附件BZ1-FM2604-0001标准件\螺丝\FM2.6X4\加硬\黑色PCS 2.00面盖和前架BZ1-HM0515-0001标准件\吊装螺丝\机牙\HM5X5+5X10MM\镀彩锌\外六角PCS 1.00包装附件（依ECN8270A 改）BZ1-KA2610-0001标准件\螺丝\KA2.6X10\镀镍\加硬PCS 2.00前架与面壳BZ1-KA3008-0003标准件\圆头\自攻螺丝\KA3.0X8MM\镀彩锌\尖尾\十字型PCS 3.00散热片与U 架2个，后盖与散热片1个BZ1-M26248-0001标准件\机芯防震螺丝\M2.6X24.8\表面镀镍PCS 2.00BZ1-PB3006-0001标准件\螺丝\PB3.0X6\镀彩锌\加硬PCS 3.00散热片与U 架2，后盖与散热片1（依ECN8333A 改）BZ1-PM2004-0003标准件\圆头\机牙\PM2.0X4MM\镀彩锌\十字型PCS 3.00伺服板螺丝3个层次:1子件品号子件品名组成量单位JYT-TS6783-NAAB主件品号:品 名: 6.2寸数字屏\诺威达\日产奇俊\DVD+BT+GPS 2009-8-5备 注:制作日期:审核日期:2010-3-10备注BZ1-TBM265-0001标准件\圆头\螺丝\TTBM2.6X5\镀彩锌PCS 34.00前架与左右侧板4PCS ，上盖与后散热片4PCS ，后散热片与左右侧板4PCS ，主板与GPS-PCB 支架3PCS ，后散热片与ISO 支架2PCS ，后散热片与下盖1PCS ，后散热片与TV 支架3PCS ，后散热片与天线插座1PCS ，IC 支架与散热片2PCS ，主板与左右侧板4PCS ，GPS 板与GPS-PCB 支架2个，TV-PCB 与GPS-PCB 支架2个，机芯与机芯支架4个。
S型全热产品说明书
型号
L
670 670 735 735
L1 W
65 65 75 75 55 0 55 0 63 0 63 0 85 0 85 0
W1 H
60 60 60 60 80 80 200 200 250 250
H1
100 100 125 125
D
E
F
D
G
19 19 19 19
W
W1
M
N
308 590 597 291 590 597 3 92 6 5 5 6 7 7 3 40 6 5 5 6 7 7
QFA-D1000S QFA-D1000S-Y 静压-风量性能曲线
600 500 400
高档
600 500 400 300
低档 低档
高档
300 200 100 0 200 400 600 800 1000 1200 1400 1600 1800 2000
QFA-D1500S QFA-D1500S-Y 静压-风量性能曲线
安装实例
备注：1 .必须安 装2个 室 外 风道（室内新 风 管 道 和排风管道） ， 以 防 止冷凝； （材 料 ： 保温材料， 厚 度 ：2 5 m m） 2 .检 修 空 间必须预留检 查 盖 下 方300以上。
Q FA-D 150 S-Y
线控型（普通型不表示） 薄型 风量150m³/ h 吊顶式安装 新风设备 全热型
保修卡 姓 名 电 话 年 月 日
单位或地址 保修期限
购买日期
1、 本 产 品 整 机 维 修 一 年,在 正 常 使 用 状 况 下 免 费 维 修 。 2、 保 修 期 的 起 始 日 期 以 产 品 发 票 日 期 为 准 。 3、 维 修 时 请 出 示 发 票 。 4、 在 保 修 期 间 ， 若 有 下 列 情 况 恕 不 免 费 维 修 。 •由 于 没 有 按 说 明 书 上 要 求 使 用 而 造 成 故 障 的 。 •由 于 自 行 修 理 改 装 以 致 损 坏 的 。 •由 于 不 可 抗 力 因 素 所 造 成 的 故 障 或 损 坏 的 。 •由 于 非 正 常 使 用 （ 如 长 时 间 使 用 于 环 境 恶 劣 的 场 所 或 车 辆 、 船舶上搭载）所造成之故障或损坏的。 •由 于 人 为 敲 击 、 摔 、 撞 、 切 、 割 等 损 坏 的 。 5、 超 过 保 修 期 或 不 属 于 免 费 保 修 的 产 品 ， 本 公 司 的 特 约 维 修 点 仍竭诚为您服务。
BDS16中文资料
BDS16 BDS16SMD BDS17 BDS17SMD
MECHANICAL DATA Dimensions in mm
1 0.6 0.8 4.6
16.5
3.6 Dia. 1 3 .5 1 0 .6
SILICON NPN EPITAXIAL BASE IN TO220 METAL AND SMD1 CERAMIC SURFACE MOUNT PACKAGES
Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@ Website:
Prelim. 7/00
Test Conditions
BDS16 BDS17 BDS16 BDS17 VEB = 5V BDS16 BDS17 IC = 1A IC = 1A IC = 0.5A IC = 4A IC = 0.5A IC = 100mA IB = 0.1A VCE = 2V VCE = 2V VCE = 2V VCE = 10V VCB = 120V VCB = 150V VCE = 60V VCE = 75V
3 .6 0 (0 .1 4 2 ) M a x .
1
3
0 .7 6 (0 .0 3 0 ) m in .
APPLICATIONS
1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 )
1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 )
2
• POWER LINEAR AND SWITCHING APPLICATIONS • GENERAL PURPOSE POWER
Prelim. 7/00
日本连续模加工、组立、检测资料-中文版-各种材料性能比校
乙缩醛 一般用甲基丙烯 树脂板
较适用在
应 用 18-8系快削不锈钢·无磁性。 比SUS304切削性要良好。 作为一般耐腐蚀钢·耐热钢， 广泛使用性最高的材料。 在海水和各种媒体里要比304优胜， 有耐海水性。 烧钝可能 烧钝可能。加工性良好。
JIS
平 钢 角 钢 六角钢 圆 棒 钢 板 形 钢
○ ○ JIS G4303~ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○
7.弹簧用材料
种 钢琴线 硬钢线 类 材料记号 SWP-A SWP-B SWB SWC SWO-A SWO-B SWO-V 用 途 以高强度优胜于均质性的冷轧拉丝（引拔）材。 高质量的弹簧、或成形加工用。 适用于普遍性的应力。 价格便宜的弹簧、或成形加工用。 烧钝·退火过的物体。达到一般目的的弹簧用。 烧钝·退火过的物体。在表面状态上占优势， 带有平均的拉力强度 烧钝·退火过的物体。 冲击货重及稍高温用。 烧钝·退火过的物体。 冲击货重及稍高温用。 一般的耐腐蚀·耐热用 在弹簧用方面带有磁性。 耐热性良好。耐腐蚀性比302型号要好。 在弹簧用方面带有磁性。 弹簧加工后析出硬化。 在高强度方面用一般的耐腐蚀。 在弹簧用方面带有磁性。 使用许容温度℃ 110 110 110 120 120 220 245 290 290 JIS G 4314 340 JIS JIS G 3522 JIS G 3521 JIS G 3560 JIS G 3561 JIS G 3565 JIS G 3566
如押出材般从热轧加工工程开始急冷、在其后之常温上称为使时效硬化之处理。纠正等的冷轧加工达到不影响 强度的程度。如通过6063热轧加工（押出）后的冷却、适用于较易获得烧钝效果的合金上。 此处理是根据板、棒、管等，为了更加提高强度而进行冷轧时、及提高纠正尺寸精度而进行冷轧加工的效果 也有认同。冷轧加工度比普通的T3大时、特定表示为T361。 为增加溶体化处理后的强度进行冷轧加工，通过给1.5%以上3%以下的永久变形（不良影响）的拉出加工， 除去残留应力后，使其更自然时效之物体。 通常在常温放置4天左右结束时效，但7NO1时由于经过长期性的进行，规定把经过1个月后的拉力性质作为 参考值。根据需要家按规定的条件把T4处理过的物体称为T42。 为计划提高机械性的性质、尺寸安定化、进行人工时效硬化处理。按6063等高温加工（押出）后的冷却较适用在 易于获得烧钝效果的合金和铸物里。 以热处理合金的代表性热处理、无进行冷轧加工可获得优越的强度。根据需要家按规定的条件把T6处理过的 物体称为T62。 温水烧钝是为了在烧钝时防止变形发生而进行的。 为获得比普通的T6处理要高的强度，调整人工时效硬化处理的条件。 把强度在某程度上作牺牲是为了调整特别的性质、超过获得最大强度的人工时效硬化处理条件、 经过过时效处理之物体。 为改善破坏应力腐蚀性、在溶体化处理后的基础上再实行过时效处理。 为改善破坏应力腐蚀性、在溶体化处理后实行残留1%到5%的永久变形的压缩加工除去残留应力之后进行过 时效处理。规定于7075的自由锻造品。 为计划提高机械性的性质或提高纠正及尺寸精度所进行的冷轧，在认同冷轧加工的效果时说明。 冷轧加工时的断面减少率为3%及6%时，分别表示为T83、T86。为提高全部强度而进行。 冷轧加工是为了增加强度而进行的。
ThinkPad系统恢复盘
官方正式版ThinkPad XP系统一键恢复盘，X，T，R，SL系列ThinkPad T410s T410 T510 W510 Win XP Professional 32位简体中文系统恢复光盘T410s T410 T510 W510 WXP-P32 SC 58Y4283DISK1OF1-1 57Y9759DISK1OF2-2 58Y4869DISK2OF2-2 58Y4889FRU 58Y4283TYPE2901,2904,2907,2912,2924,2926,2928,2516,2518,2519,2522,2537,2538,2539,4313,4314 ,4339,4349,4384,4873,4484,4318,4319,4387,4389,4391下载链接及大小：ThinkPad T410s T410 T510 W510 Win XP Professional 32位简体中文系统恢复光盘DISK1OF1-1 57Y9759（/Think/ThinkPad/T_Series/T410s%20T410%20T510%20W510/T410s%20T410%20T510%20W510%20wxp-p32%20sc%2058y4283/WXP-P32%20SC%20DISK1%2057Y9 759.iso）３７８．１５MBThinkPad T410s T410 T510 W510 Win XP Professional 32位简体中文系统恢复光盘DISK1OF2-2 58Y4869（/Think/ThinkPad/T_Series/T410s%20T410%20T510%20W510/T410s%20T410%20T510%20W510%20wxp-p32%20sc%2058y4283/WXP-P32%20SC%20DISK2%2058Y4 869.iso）４．０９GBThinkPad T410s T410 T510 W510 Win XP Professional 32位简体中文系统恢复光盘DISK2OF2-2 58Y4889（/Think/ThinkPad/T_Series/T410s%20T410%20T510%20W510/T410s%20T410%20T510%20W510%20wxp-p32%20sc%2058y4283/WXP-P32%20SC%20DISK3%2058Y4 889.iso）１．１８GBThinkPad T61 R61 XP-Pro 中文简体系统补充恢复光盘下载链接Think恢复光盘：ThinkPad T61 R61 XP-Pro 中文简体系统恢复光盘DISK1OF1 524MB /think4/R61%20T61%20xp-p%20SC/Image%281of1%29.nrg Think恢复光盘：ThinkPad T61 R61 XP-Pro 中文简体系统恢复光盘DISK1OF5 700MB /think4/R61%20T61%20xp-p%20SC/Image%281of5%29.nrg Think恢复光盘：ThinkPad T61 R61 XP-Pro 中文简体系统恢复光盘DISK2OF5 690MB /think4/R61%20T61%20xp-p%20SC/Image%282of5%29.nrg Think恢复光盘：ThinkPad T61 R61 XP-Pro 中文简体系统恢复光盘DISK3OF5 685MB /think4/R61%20T61%20xp-p%20SC/Image%283of5%29.nrg Think恢复光盘：ThinkPad T61 R61 XP-Pro 中文简体系统恢复光盘DISK4OF5 614MB /think4/R61%20T61%20xp-p%20SC/Image%284of5%29.nrg Think恢复光盘：ThinkPad T61 R61 XP-Pro 中文简体系统恢复光盘DISK5OF5 433MB /think4/R61%20T61%20xp-p%20SC/Image%285of5%29.nrg ThinkPad T62 T400 R400 XP-P SC 32位中文简体恢复光盘提供两种下载方式，各有其一文件比较好下载，正好配成一套（1VCD，1DVD）ThinkPad T62 T400 R400 XP-P SC 32位中文简体恢复光盘 2of1.isoed2k://|file|ThinkPad%20T62%20T400%20R400%20XP-P%20SC%2032%E4%BD%8D%E4%B8%AD%E6 %96%87%E7%AE%80%E4%BD%93%E6%81%A2%E5%A4%8D%E5%85%89%E7%9B%98%20%202of1.iso|3874 26304|9991FFBDB628BC883FE6F75D24B380A0|h=QWZVY32I6MDZAEXF45QQOIY32XLGXMYS| ThinkPad T62 T400 R400 XP-P SC 32位中文简体恢复光盘 2of2.isoed2k://|file|ThinkPad%20T62%20T400%20R400%20XP-P%20SC%2032%E4%BD%8D%E4%B8%AD%E6 %96%87%E7%AE%80%E4%BD%93%E6%81%A2%E5%A4%8D%E5%85%89%E7%9B%98%20%202of2.iso|4164 292608|30270C401AC81DCDDB05451A44F83F5E|h=CWISWRL5A526B22EKNO2MIAZMOY35JF4|纳米盘下载地址/d/RescueAndRecoveryDisc.iso/1882783f564795f3589bad3ffa01 7bf01cc3a60c00a81717/d/ProductRecoveryDisc.iso/d797107640e2637feee16daccf9335 13011a3d18006031f8ThinkPad SL300 SL400 SL500 XP-P SC 32位中文简体恢复光盘适用机型TYPE：2738,2743,2746SL300 SL400 SL500XP-P SCFRU46V2016MD5码:43R9964.iso D6*******AA085A9C2E370DEE8D0D7AA46V0648.iso 08A14CA913DB056C49A182121790B96C46V0676.iso 85AD4B8558BA986DCFBD80444D202E61ThinkPad SL300 SL400 SL50 XP-P SC 32位中文简体恢复光盘 369.48M/Think/ThinkPad/SL_Series/SL300%20SL400%20SL500%20 WINXP-P%20SC%2046V2016/43R9964.isoThinkPad SL300 SL400 SL50 XP-P SC 32位中文简体恢复光盘 4.04G/Think/ThinkPad/SL_Series/SL300%20SL400%20SL500%20 WINXP-P%20SC%2046V2016/46V0648.isoThinkPad SL300 SL400 SL50 XP-P SC 32位中文简体恢复光盘 1.08G/Think/ThinkPad/SL_Series/SL300%20SL400%20SL500%20 WINXP-P%20SC%2046V2016/46V0676.iso安装方法：把碟刻好后放入光驱，先开机按F1进入 bios → config →SATA Operation →把AHCI改为Compatibility ，然后按F10保存重启，会进入恢复光盘，选择第三个从光盘恢复回车后再选择恢复C盘，回车就可以开始恢复系统了，恢复完了以后重启，再进入bios →config → SATA Operation →把Compatibility改为AHCI，然后按F10保存重启，进入系统就一切OK了，第一次进入系统不能切换显卡，带驱动自动安装完毕再重启一次就OK了官方正式版ThinkPad Vista系统一键恢复盘X，T，R，SL系列ThinkPad T60/T60p Vista Business 中文简体系统恢复光盘知识编号：26612适用范围T60,T60P type1951.1952.1953.1954.2007.2008.2613.2623.6369.6371.6372.8741.8742.8743.8744Vista BusinessSC下载链接ThinkPad T60/T60p Vista Business 中文简体系统恢复光盘 1of3 204MB/Think/VISTA_THINKPAD/T60/VISTA/1.isoThinkPad T60/T60p Vista Business 中文简体系统恢复光盘 2of3 1.96GB/Think/VISTA_THINKPAD/T60/VISTA/2.isoThinkPad T60/T60p Vista Business 中文简体系统恢复光盘 3of3 1.47GB/Think/VISTA_THINKPAD/T60/VISTA/3.isoThinkPad T60/R60 Vista ultimate 中文简体系统恢复光盘适用机型T60,T60P-type1951.1952.1953.1954.2007.2008.2613.2623.6369.6371.6372.8741.8742.8743.8744X60,X60S-type1702.1704.1705.1706.1708.1709.2509Z61t,Z61p,Z61m type6722.6732.9450.9451.9452.9453.0672.0673.9440.9441.9442.9443.9448R60,60e-type9455.9456.9457.9459.9444.9445.9446.9447.9460.9461.9462.9464.0656.0657.0658.0659 Vista UltimateSCR60机器也可以使用下载链接Think恢复光盘：ThinkPad T60 Vista ultimate简体中文系统恢复光盘 disk 1 of 3 205M /Think/think2/thinkpad/T60%20Vista-ultimate%20sc/i mage%281of3%29.isoThink恢复光盘：ThinkPad T60 Vista ultimate简体中文系统恢复光盘 disk 2 of 3 2.3G /Think/think2/thinkpad/T60%20Vista-ultimate%20sc/i mage%282of3%29.isoThink恢复光盘：ThinkPad T60 Vista ultimate简体中文系统恢复光盘 disk 3 of 3 1.47G /Think/think2/thinkpad/T60%20Vista-ultimate%20sc/i mage%283of3%29.isoThinkPad T61、T61中文vista ultimate SP1恢复光盘。
乐维顿制造公司S-型墙内扬声器产品数据说明书
Leviton Manufacturing Co., Inc. Global Headquarters201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation.4330 Michoud Blvd., New Orleans, LA, 70129 Tel: 1-504-736-9810 Fax: 1-504-253-2954Visit our Website at: /emca©2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.SGI65 In-Wall SpeakersSpec-Grade ®S G I 65 I n -W a l l S p e a k e r s P o w e r e d b y S p e c -G r a d e ®When the specs call for quality sound, rely onLeviton’s award-winning* Spec-Grade Sound™ indoor and outdoor speaker line for exceptional technical innovation and value. Spec-Grade Sound speakers deliver features and performance comparable to higher-end brands, at a price that’s right for the entire range of the residential installation and construction business.All of Leviton Spec-Grade Sound™ indoor speakers incorporate exceptionally strong, light and rigidAeroNylon tweeters and Kevlar®-composite woofers for exceptional clarity, detail and impact, along with built-in AutoSurge™ protection to help protect the speakers from possible damage due to overdriving. The outdoor/utility speaker is constructed of weather resistant materials inside and out for years of use in challenging environments.*Electronic House Magazine “Product of the Year”APPLICATIONS In-Wall SpeakersIn-wall speakers offer a no-compromise choice for installed systems by projecting sound directly into a listening area from a horizontal location just like a shelf or floor speaker system.They are a perfect solution for: 1. Primary listening systems: musical applications where sound quality is most important and wall locations do not conflict with room aesthetics. 2. Installed home theater systems: as front left and right speakers, and as surround speakers.FEATURES AND BENEFITS (In-Wall Models)• Kevlar® composite woofer – Woofer construction combines exceptional rigidity and lightness to provide the perfect linear movement needed to reproduce dynamic, tight bass and incisive midrange frequencies• AeroNylon tweeter diaphragm – Aerospace-grade nylon tweeter diaphragm combines very lowmass and high tensile strength to provide crystal-clear treble response and exceptionally accurate tracking of even the most challenging musical transients• AutoSurge™ circuit protection – Built-in AutoSurge protection responds to potentially destructive power peaks automatically and resets after the event, helping prevent speaker damage • Advanced phase/time alignment guide –A precise phase/time waveguide is used to properly align sound without mis-aligning the tweeters – a problem with many adjustable in-wall speakers – in order to provide extremely accurate stereo imaging • Precision dividing network – The dividing network (or crossover) used in all Spec-Grade Sound speakers is made of high-spec components to ensure total audio signal electronic integrity up to the last microsecond before the signal is converted into sound• Inert mounting frame with “dogleg” installation • points – To eliminate any transmitted vibrations that could color in-wall or ceiling sound quality, Spec-Grade Sound speakers rely on a baffle-frame assembly incorporating higher-density plastics and a series of adjustable “doglegs” to rigidly clamp the speaker to the wall or ceiling material• 6.5- Inch Two-Way In-Wall Loudspeaker (Cat. No. SGI65-00W)• Includes paintable white grille• 6.5-inch Kevlar composite cone low-frequency transducer• .5-inch AeroNylon dome high-frequency transducer with phase/time alignment guide• 2-way balanced precision crossover network with AutoSurge circuit protection• Frequency Response: 50-20kHz +/- 3dB • Sensitivity: 88.0 dB SPL @ 1Watt/• 1 MeterSAT-10092Leviton Manufacturing Co., Inc. Global Headquarters201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation.4330 Michoud Blvd., New Orleans, LA, 70129 Tel: 1-504-736-9810 Fax: 1-504-253-2954Visit our Website at: /emca©2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.65 PRODUCT DATA• Power Handling: 120W peak/60W RMS • Impedance: Nominal 8 Ohms/• Minimum 6 Ohms• Physical Dimensions and Weight:• Height: 12.31 in/312.8 mm • Width: 9.02 in/229 mm • Depth: 3.20 in/81.28 mm • Weight: 7.3 lbsPRE-CONSTRUCTION BRACKET KIT Cat. No.: PCI65INSTALLATION INSTRUCTIONSCAUTION: NOTE THAT THIS MANUAL IS WRITTEN WITH THE ASSUMPTION THAT THE INSTALLER POSSESSES SKILL IN THE PROPER USE OF HAND AND POWER TOOLS, AND IS FAMILIAR WITH THE ENVIRONMENT BEHIND THE SURFACE OF THE WALL OR CEILING WHERE THE SPEAKERS WILL BE INSTALLED. TO INSTALL:1. S elect speaker mounting location. Route speaker cable from source to this location. Note: We recommend the use of 16/2 (minimum) class 3 speaker wires.2. A ttach wings to back plate of Pre-Construction Bracket (refer to Figure 1A). Only two wings are required for each back plate. Select the mounting arrangement that best suites your specific application. Note: The wings are designed to be shortened as required.3. A ttach the Pre-Construction Bracket in the desired location to the underside of framing members so that after drywall installation, the bracket and the wings are sandwiched between the drywall and the framing member (ensure “FRONT” is facing into the room) (referto Figure 1A). If the mounting area is too congested to use both mounting wings you can drive screws through 4. L 5. A。
SI2308BDS中文资料
Vishay SiliconixSi2308BDSN-Channel 60-V (D-S) MOSFETFEATURES•TrenchFET ® Power MOSFET•100 % R g Tested •100 % UIS TestedAPPLICATIONS•Battery Switch •DC/DC ConverterPRODUCT SUMMARYV DS (V)R DS(on) (Ω)I D (A)a Q g (Typ.)600.156 at V GS = 10 V 2.3 2.3 nC0.192 at V GS = 4.5 V2.1Notes:a. Based on T C = 25 °C.b. Surface Mounted on 1" x 1" FR4 board.c. t = 5 s.d. Maximum under Steady State conditions is 130 °C/W.ABSOLUTE MAXIMUM RATINGS T A = 25 °C, unless otherwise notedParameter Symbol LimitUnit Drain-Source Voltage V DS 60VGate-Source Voltage V GS± 20Continuous Drain Current (T J = 150 °C)T C = 25 °C I D2.3AT C = 70 °C 1.8T A = 25 °C 1.9b, c T A = 70 °C 1.5b, cPulsed Drain Current I DM 8Continuous Source-Drain Diode CurrentT C = 25 °CI S 1.39T A = 25 °C 0.91b, cAvalanche Current L = 0.1 mHI AS 6Single-Pulse Avalanche Energy E AS1.8mJ Maximum Power DissipationT C = 25 °CP D 1.66W T C = 70 °C 1.06T A = 25 °C 1.09b, c T A = 70 °C 0.7b, cOperating Junction and Storage T emperature Range T J , T stg - 55 to 150°C THERMAL RESISTANCE RATINGSParameter Symbol Typical Maximum UnitMaximum Junction-to-Ambient b, d≤ 5 s R thJA 90115°C/WMaximum Junction-to-Foot (Drain)Steady State R thJF6075Vishay SiliconixSi2308BDSNotes:a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %.b. Guaranteed by design, not subject to production testing.Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.MOSFET SPECIFICATIONS T J = 25 °C, unless otherwise notedParameter Symbol Test Conditions Min.Typ.Max.UnitStaticDrain-Source Breakdown Voltage V DS V DS = 0 V , I D = 250 µA60V V DS Temperature Coefficient ΔV DS /T J I D = 250 µA 55mV/°C V GS(th) T emperature Coefficient ΔV GS(th)/T J - 5Gate-Source Threshold Voltage V GS(th) V DS = V GS , I D = 250 µA 13V Gate-Source LeakageI GSS V DS = 0 V, V GS = ± 20 V ± 100nA Zero Gate Voltage Drain Current I DSS V DS = 60 V , V GS = 0 V 1µA V DS = 60 V, V GS = 0 V , T J = 55 °C10On-State Drain Current aI D(on) V DS ≥ 5 V, V GS = 10 V 8A Drain-Source On-State Resistance a R DS(on) V GS = 10 V , I D = 1.9 A 0.1300.156ΩV GS = 4.5 V , I D = 1.7 A 0.1600.192Forward T ransconductance a g fsV DS = 15V , I D = 1.9 A5SDynamic bInput Capacitance C iss V DS = 30 V , V GS = 0 V , f = 1 MHz 190pFOutput CapacitanceC oss 26Reverse Transfer Capacitance C rss 15Total Gate Charge Q g V DS = 30 V , V GS = 10 V , ID = 1.9 A 4.5 6.8nC V DS = 30 V, V GS = 4.5 V, I D = 1.9 A2.33.5Gate-Source Charge Q gs 0.8Gate-Drain Charge Q gd 1Gate Resistance R g f = 1 MHz0.62.8 5.6ΩTurn-On Delay Time t d(on) V DD = 30 V, R L = 20 ΩI D ≅ 1.5 A, V GEN = 10 V , R G = 1 Ω46ns Rise Timet r 1015Turn-Off Delay Time t d(off)1015Fall Timet f710.5Turn-On Delay Time t d(on)V DD = 30 V, R L = 20 ΩI D = 1.5 A, V GEN = 4.5 V , R G = 1 Ω1523ns Rise Timet r 1624Turn-Off Delay Time t d(off) 1117Fall Timet f1117Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current I S T C = 25 °C1.39A Pulse Diode Forward Current a I SM 8Body Diode VoltageV SD I S = 1.5 A0.8 1.2V Body Diode Reverse Recovery Time t rr I F = 1.5 A, di/dt = 100 A/µs, T J = 25 °C1523ns Body Diode Reverse Recovery Charge Q rr 1015nC Reverse Recovery Fall Time t a 12nsReverse Recovery Rise Timet b3Output CharacteristicsTransfer CharacteristicsOn-Resistance vs. Junction TemperatureThreshold VoltageSingle Pulse Power ArraySafe Operating AreaVishay SiliconixSi2308BDSTYPICAL CHARACTERISTICS 25°C, unless otherwise noted* The power dissipation P D is based on T J(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit.Current Derating*Power Derating, Junction-to-CasePower Derating, Junction-to-AmbientVishay SiliconixSi2308BDSTYPICAL CHARACTERISTICS 25°C, unless otherwise notedVishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see /ppg?69958.Normalized Thermal Transient Impedance, Junction-to-AmbientNormalized Thermal Transient Impedance, Junction-to-FootDisclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网。
T61系统的安装
T61系统的安装一般T61 装机有几个地方是最需要注意的1,SATA硬盘的问题，常规的XP安装盘在安装过程中将会认不到硬盘（这个可能是地球人都知道的问题了）2,就是声卡驱动和MODEM驱动的问题（这个在T60时代就己经发生了，并己经被解决）3, 带摄像头的T61，在装完主板驱动之后会出现无法在关机的情况接下来就让我一步一步带您在您的爱机上安装一个纯静的XP系统吧前期准备工作：一张XP的安装光盘（版本就要看您的爱好了，我一般用的是OEM 的SP2安装盘，您也可以选择 VOL版的，甚至图速度快，还可以用万能GHOST版的，不过象网上流传的一些万能GHOST版精简版集成版之类的，我个人都感觉不怎么好用，经常会出现一些这样那样的问题，不过还是看个人喜好了，萝卜青菜各有所爱嘛）必要的驱动：在装好一个空的XP系统之后，正常情况下，网卡无线网卡都没有驱动起来，所以先把这两个驱动准备好，这样就可以在装完这个空系统后就直接上网，下载剩余的驱动，在线更新等后续工作，当然，您也可以在备机上下载好所有的驱动第一步：当然是开机了，F1，进BIOS，没事喜欢设个密码的，要输入密码，进入BIOS之后，第一项 CONFIG－SERIALATA（SATA）回车，把原来的AHCI模式改成compatibility模式，F10，确认退出，光盘启动，安装XP，没有什么悬念，一直到XP安装完成进入一个驱动都不全的空系统为止一般就会只剩下如下图所示的一些驱动没有安装第二步：安装网卡无线网卡驱动，这样可以用本机上网下载驱动，当然您也可以用备机去下载好，但对于只有一台机器的朋友，只能现在装好网卡和无线网卡驱动网卡驱动下载http://www- /pc/supporitestyle=lenovo&Intel PRO /1000 LAN adapter software for Windows 2000, XP - ThinkPad R61, T61, T61p, X61, X61s, X61 Tablet http: ///ibmdl/pub/pc/pccbbs/mobiles/7kra18ww.exe这个X61 T61基本通用，至于无线网卡，首先要确定你的机器上装的是什么无线网卡，不过目前一般的都是装备的 3945ABG 4965AG，当然这个不是绝对的ntelPRO 2200bg, 2915abg, 3945bg, 3945abg, 4965ag, and 4965agn Mini PCIadapter wireless soft ware for Windows XP, 2000 - ThinkPad/pc/supporitestyle=lenovo& /ibmdl/pub/pc/pccbbs/mobiles/7kwc27ww.exe这个驱动包里包括了2200bg, 2915abg, 3945bg, 3945abg, 4965ag, and 4965agn，基本上可以通吃了，但还是有很多机器上装的是IBM 802。
海盾洗涤说明书资料
• 特性：
•
1.用途广泛，适用于各种滚筒脱脂及浸渍脱脂之用。
•
2. 适用于各种金属，如，铁，钢，铜，黄铜，锌铸件。
•
3. 对各种加工油脂均有优良的洗净效果，特别适用于洗净各种矿物油。
•
4. 水洗容易。
•
5. 微颗粒状，不伤胚，使用管理方便。
• 使用方法：
•
浓度; 10-40g/L
•
温度：常温至45℃
• 主要用途：
•
1. 电镀，祛斑，涂装前处理。
•
2.一般金属之除油。
• 使用方法：
•
浓度： 40-70克/L
温度： 50-90℃
•
时间：3-6分钟
HLSC-8广温型除油剂
• 特性：
•
1. 适用于钢铁，铜，锌，铝，镁等金属。
•
2. 除浸渍除油脂外，亦可使用于超声波清洗。
•
3. 含合成表面活性剂，具良好化学平衡性，使用寿命长。
•
温度：常温-80℃
•
时间：2-8min或至油除尽。
HLSC-36锌合金除蜡脱脂剂
• 锌合金经抛光处理后的抛光蜡污染洗净困难，除了不可腐蚀素材降低金属光泽且不用 有毒性易引火的溶剂可说是不容易。LSC-36乃是针对此项挑战所开发的杰出产品。
• 特性：
•
1. 适用于铁，铜，锌，铝，镁，等金属及其合金。
HDWS强力除蜡水
• 是我公司开发的轻金属用强力除蜡水，他可满足客户的特殊要求，对轻金属物腐蚀， 不伤轻金属的光亮度，能彻底去除轻金属的重油污及抛光蜡。
• 特性：
•
1. 除轻金属外对钢铁，铜等金属无腐蚀，不伤轻金属的光亮度。
•
2. 能彻底去除重油污及抛光蜡。
XP1024-BD中文资料
S12,Vd = 4.5V, Vg = 0.6V, Id1 = 216mA, Id3 = Id4 = 440mA
0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 -65 -70 -75 -80 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 Frequency (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
+6.0 VDC 1700 mA +0.3 VDC +5 dBm -65 to +165 OC -55 to MTTF TAble4 MTTF Table 4
(4) Channel temperature affects a device's MTTF. It is recommended to keep channel temperature as low as possible for maximum life.
罗伯特·波瑟电工具有限公司产品说明书：墙上探测器D-tect200C专业版1 609 92A 7JX
2 |English...................................................Page10中文.......................................................页34繁體中文..................................................頁55한국어...............................................페이지76ไทย......................................................หน้า99Bahasa Indonesia.....................................Halaman126Tiếng Việt...............................................Trang1501 609 92A 7JX | (10.05.2022)Bosch Power Tools| 3(1)(2)(2)(3)(4)(5)(9)(10)(11)(6)(7)(8)(12)(13)(14)(15)(16)(17)(18)Bosch Power Tools1 609 92A 7JX | (10.05.2022)4 |(21)(22)(1)(5)(20)(19)(5)1 609 92A 7JX | (10.05.2022)Bosch Power Tools|511243AB(25)(9)(10)(25)(26)(9)(27)(28)Bosch Power Tools1 609 92A 7JX | (10.05.2022)BA1 609 92A 7JX | (10.05.2022)Bosch Power Tools|7C 3+R 2032V (30)(31)(29)Bosch Power Tools 1 609 92A 7JX | (10.05.2022)8 | EnglishTable of ContentsSafety Instructions....................................................................................page 10 Product Description and Specifications........................................................page 12 Intended Use.......................................................................................page 12 Product Features.................................................................................page 12 Technical Data.....................................................................................page 13 Operation.................................................................................................page 15 Measuring Tool Power Supply................................................................page 16 Operation with lithium-ion rechargeable battery pack (see figure A)......page 16 Operation with non-rechargeable batteries (see figure B).....................page 17 Starting Operation...............................................................................page 17Switching on/off............................................................................page 17 Overview of the measuring modes..........................................................page 18 Measuring Mode <Object Detection>....................................................page 18 How it Works.................................................................................page 18 Change the wall type.......................................................................page 19 Wall Type <Brick / Universal>.........................................................page 19 Wall Type <Concrete>....................................................................page 19 Wall Type <Drywall>......................................................................page 19 Wall Type <Panel Heating>.............................................................page 19 Wall Type <Vertical Coring Brick>...................................................page 19 Wall Type <Horizontal Coring Brick>...............................................page 20 Wall Type <Early Age Concrete>.....................................................page 20 Change the view.............................................................................page 20 <Spot View> ................................................................................page 20 <Object View> .............................................................................page 21 <Signal View 2D> .........................................................................page 23 <Signal View> ..............................................................................page 24 Measuring Mode <Leakage Detection>..................................................page 24 Measuring Mode <Distance Measurement>...........................................page 25 Save/transfer the measuring results.......................................................page 25 1 609 92A 7JX | (10.05.2022)Bosch Power ToolsEnglish | 9Saving Measuring Results as an Image...............................................page 25 Data transfer via USB Type-C® interface............................................page 25 Data Transfer via SD Card................................................................page 26 Main Menu..........................................................................................page 26 Navigating in the menu....................................................................page 26 Menu options.................................................................................page 26 Measuring Tool Software Update............................................................page 27 Errors – Causes and Corrective Measures................................................page 28Maintenance and Service............................................................................page 28 Maintenance and Cleaning....................................................................page 28 Inserting/Changing the Coin Cell (see figure D)...................................page 28 After-Sales Service and Application Service.............................................page 29 You can find further service addresses at:..........................................page 29Transport...........................................................................................page 29 Disposal.............................................................................................page 30 Battery packs/batteries:..................................................................page 30 Additional information for Australia........................................................page 30 Correct operation...........................................................................page 30 Usage exclusion zones....................................................................page 30Bosch Power Tools 1 609 92A 7JX | (10.05.2022)10 | EnglishEnglishSafety Instructionsuginal replacement parts. This will ensure that the safety of the measuring tool is maintained.u Do not use the measuring tool in explosive atmospheres which contain flam-mable liquids, gases or dust. Sparks may be produced inside the measuring tool, which can ignite dust or fumes.u Do not open the battery. There is a risk of short-circuiting.u In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode. Ensure the area is well ventilated and seek med-ical attention should you experience any adverse effects. The vapours may irritate the respiratory system.u If used incorrectly or if the battery is damaged, flammable liquid may be ejected from the battery. Contact with this liquid should be avoided. If contact accident-ally occurs, rinse off with water. If the liquid comes into contact with your eyes, seek additional medical attention. Liquid ejected from the battery may cause irrita-tion or burns.u The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.u When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws or other small metal objects that could make a connection from one ter-minal to another. A short circuit between the battery terminals may cause burns or a fire.u Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.u Only charge the batteries using chargers recommended by the manufacturer. A charger that is suitable for one type of battery may pose a fire risk when used with a different battery.1 609 92A 7JX | (10.05.2022)Bosch Power ToolsEnglish | 11eliminate hazards, familiarise yourself with further sources of information, such as building plans and photographs taken during construction, etc. before carry-ing out any drilling, sawing or routing work on walls, ceilings or floors. The accur-acy of the measuring tool may be affected by environmental influences, such the level of humidity or there being other electronic devices nearby. The structure and condi-tion of the walls (e.g. damp, building materials containing metal, electrically conduct-ive wallpaper, insulating materials, tiles) and the number, type, size and position of the objects may distort the measuring results.u If there are gas pipes in the building, check to ensure that none of them have been damaged after completing any work on walls, ceilings or floors.u Switch off power consumers and make sure that live cables are de-energised be-fore drilling, sawing or milling into walls, ceilings or floors. After performing any kind of work, check to ensure that objects placed on the substrate are not live. u When attaching objects to dry walls, and in particular when attaching them to the substructure, check to ensure that both the wall and the fastening materials have a sufficient load-bearing capacity.uyou suspect that someone has swallowed a coin cell or that a coin cell has entered the body in another way, seek medical attention immediately. Swallow-ing coin cells can result in severe internal burns and death within 2 hours.u Ensure that coin cell replacement is carried out properly. There is a risk of explo-sion.u Only use the coin cells listed in this operating manual. Do not use any other coin cells or other forms of electrical power supply.u Do not attempt to recharge the coin cell and do not short circuit the coin cell. The coin cell may leak, explode, catch fire and cause personal injury.Bosch Power Tools 1 609 92A 7JX | (10.05.2022)12 | Englishu Remove and dispose of drained coin cell correctly. Drained coin cell may leak and damage the product or cause personal injury.u Do not overheat the coin cell or throw it into fire. The coin cell may leak, explode, catch fire and cause personal injury.u Do not damage the coin cell and take the coin cell apart. The coin cell may leak, ex-plode, catch fire and cause personal injury.u Do not allow damaged coin cells to come into contact with water. Leaking lithium may mix with water to create hydrogen, which could cause a fire, an explosion, or per-sonal injury.u If the coin cell holder cannot be closed correctly and fully, stop using the measuring tool, remove the coin cell and have the measuring tool repaired.Product Description and SpecificationsPlease observe the illustrations at the beginning of this operating manual.Intended UseThe measuring tool is intended for the detection of objects in walls, ceilings and floors. Depending on the material and condition of the base material, it is possible to detect metal objects, wooden beams, plastic pipes, conductors and cables.The measuring tool is suitable for indoor and outdoor use.Product FeaturesThe numbering of the product features shown refers to the illustration of the measuring1 609 92A 7JX | (10.05.2022)Bosch Power ToolsEnglish | 13b)Accessories shown or described are not included with the product as standard. You canfind the complete selection of accessories in our accessories range.Bosch Power Tools 1 609 92A 7JX | (10.05.2022)14 | English1 609 92A 7JX | (10.05.2022)Bosch Power ToolsEnglish | 15and the selected view. The best results can be obtained in homogeneous, dry substrates. In ad-dition, a deviation in the indicated object depth of ±0.5 mm/cm for objects deeper than 60 mm must be taken into account.B)Depends on the material and condition of the substrateC)Only non-conductive deposits occur, whereby occasional temporary conductivity caused bycondensation is expected.D)Depends on battery in useE)The lithium-ion battery and AA1 battery adapter are not covered by IP 5X.The serial number (20) on the type plate is used to clearly identify your measuring tool.u The accuracy and detection depth of the measuring result may be negatively af-fected if the condition of the substrate is unfavorable.Operationu Protect the measuring tool from moisture and direct sunlight.u Do not expose the measuring tool to any extreme temperatures or variations in temperature. In case of large variations in temperature, leave the measuring toolBosch Power Tools 1 609 92A 7JX | (10.05.2022)16 | Englishto adjust to the ambient temperature before switching it on. The accuracy of the measuring tool and the functionality of the display may be compromised if exposed to extreme temperatures or variations in temperature.u Avoid hard knocks to the measuring tool or dropping it. After severe external influ-ences and in the event of abnormalities in the functionality, you should have the measuring tool checked by an authorised Bosch after-sales service agent.u Certain ambient conditions fundamentally impair the measuring results. These include, e.g. the proximity of devices that generate strong electric, magnetic or electromagnetic fields, moisture, metal building materials, foil-laminated insula-tion materials or conductive wallpaper or tiles. Therefore, also refer to other in-formation sources (e.g. construction plans) before drilling, sawing or routing into walls, ceilings or floors.u Hold the measuring tool by the intended gripping surface (11) only, so as not to influence the measurement.u Do not attach any stickers or labels to the sensor area (19) on the rear of the measuring tool. Metal labels in particular will affect measuring results.Do not wear gloves when taking measurements and make sure that youare properly earthed. If you are not properly earthed, the material identifica-tion of "live" wires may be impaired.When taking measurements, avoid devices that emit strong electric, mag-netic or electromagnetic fields. If possible, deactivate all tools whose radi-ation could interfere with the measurement and switch off the correspondingfunctions or tools.Measuring Tool Power SupplyThe measuring tool can be operated either with conventional non-rechargeable batteries or with a Bosch lithium-ion battery.Operation with lithium-ion rechargeable battery pack (see figure A)u Use only the chargers listed in the technical data. Only these chargers are matched to the lithium-ion battery of your measuring tool.Note: The use of batteries unsuitable for your measuring tool can lead to malfunctions or damage to the measuring tool.Note: Lithium-ion rechargeable batteries are supplied partially charged according to in-ternational transport regulations. To ensure full rechargeable battery capacity, fully charge the rechargeable battery before using your tool for the first time.To insert the charged battery pack (10), slide it into the battery bay (25) until you feel it engage.1 609 92A 7JX | (10.05.2022)Bosch Power ToolsEnglish | 17 To remove the battery pack (10), press the release buttons (9) and pull the battery pack out of the battery bay (25). Do not use force to do this.Operation with non-rechargeable batteries (see figure B)It is recommended that you use alkaline manganese batteries to operate the measuring tool.The batteries are inserted into the battery adapter.u The battery adapter is intended only for use in designated Bosch measuring tools and must not be used with power tools.To insert the batteries, slide the receptacle (28) of the battery adapter into the battery bay (25). Place the batteries in the receptacle as shown in the picture on the cap (27). Slide the cap over the receptacle until you feel it click into place.To remove the batteries (26), press the release buttons (9) of the cap (27)and pull off the cap. Make sure that the batteries do not fall out by holding themeasuring tool with the battery bay (25) facing upwards. Remove the batter-ies. To remove the receptacle (28) from inside the battery bay, reach into thereceptacle and pull it out of the measuring tool, applying light pressure to theside wall as you do so.Always replace all the batteries at the same time. Only use batteries from the same man-ufacturer and which have the same capacity.u Take the batteries out of the measuring tool when you are not using it for a pro-longed period of time. The batteries can corrode and self-discharge during pro-longed storage in the measuring tool.Starting OperationSwitching on/offu Before switching on the measuring tool, ensure that the sensor area (19)is dry. If necessary, use a cloth to dry the measuring tool.u If the measuring tool has been exposed to a significant change in temperature, leave it to adjust to the ambient temperature before switching it on.To switch on the measuring tool, press either the on/off button (8) or the red start button (16).To switch off the measuring tool, press the on/off button (8) again.If no button on the measuring tool is pressed for approx. 5 minutes and the measuring tool is not moved, the measuring tool will automatically switch itself off to preserve bat-tery life. You can change the switch-off time in the main menu (see "Main Menu",page 26).Bosch Power Tools 1 609 92A 7JX | (10.05.2022)18 | EnglishOverview of the measuring modesThe measuring tool has the following measuring modes:–<Object Detection>: For detecting objects in walls, floors and ceilings,–<Leakage Detection>: For detecting leaks,–<Distance Measurement>: For measuring distances.You can change the measuring mode in the main menu (see "Main Menu", page 26). Measuring Mode <Object Detection>How it WorksThe measuring tool checks the substrate of the sensor area. Objects that are different from the material of the wall are detected.If multiple objects are located over each other in the wall, the display will indicate the ob-ject whose surface is nearest to the measuring tool.Detectable objects–Plastic pipes (e.g. water-filled plastic pipes, such as underfloor or wall heating pipes,etc. with a diameter of at least 10 mm, or empty pipes with a diameter of at least20 mm in solid surrounding material)–Electrical cables (regardless of whether live or not)–Three-phase power cables (e.g. to oven)–Low-voltage cables (e.g. doorbell, telephone, network, smart home)–All types of metal pipe, rod or carrier (e.g. steel, copper, aluminium)–Reinforcing steel–Wooden beams–CavitiesSpecial measuring casesUnfavourable conditions fundamentally impair the measuring result:–Multi-layered walls–Empty plastic pipes and wooden beams in cavities and lightweight partition walls–Objects lying at an angle in the wall–Metal surfaces and moist areas; if in a wall, these may be displayed as objects under certain conditions (e.g. high moisture content).Please note that concrete requires several months to dry out completely.–Cavities in a wall; these may be displayed as objects–Proximity to devices that generate strong magnetic or electromagnetic fields, e.g. mo-bile phone base stations or generators1 609 92A 7JX | (10.05.2022)Bosch Power ToolsEnglish | 19 u Before drilling, sawing or routing into walls, refer to other sources of informa-tion to ensure that you eliminate hazards. Since the measuring results can be influ-enced by ambient conditions or the wall material, there may be a hazard even though the indicator does not indicate an object within the sensor range.Change the wall typeAlways set the appropriate wall type for best possible measuring results. To do this, re-peatedly press the left-hand (14) or right-hand arrow button (7) until the required wall type is displayed. Press the red start button (16) to accept the selection.The maximum measuring depth is 8 cm. Any deviations from this value are described in the individual wall types and views.Wall Type <Brick / Universal>The <Brick / Universal> wall type is suitable for most applications in solid masonry or other homogeneous materials. It displays plastic pipes and metal objects as well as elec-trical and other cables. Cavities in masonry or empty plastic pipes with a diameter of less than 2 cm may not be displayed.Wall Type <Concrete>The <Concrete> wall type is suitable for applications in dry concrete. It displays plastic pipes and metal objects as well as electrical and other cables. Empty plastic pipes with a diameter of less than 2 cm may not be displayed.When selecting the wall type, you can additionally set the maximum measuring depth between 8 cm and 20 cm.Wall Type <Drywall>The <Drywall> wall type is suitable for detecting timber joists and metal supports, as well as electrical and other cables in drywalls (wood, plasterboard, etc.). Filled plastic pipes and wooden beams appear identical on the display. Empty plastic pipes are not re-cognised.Wall Type <Panel Heating>The <Panel Heating> wall type is especially suitable for detecting metal, metal-compos-ite and water-filled plastic pipes and electrical cables. Empty plastic pipes are not dis-played.Wall Type <Vertical Coring Brick>The <Vertical Coring Brick> wall type is especially suitable for applications in vertically perforated bricks. Vertically perforated bricks are bricks with many small, mostly ver-tical, cavities. It displays metal objects, electrical and other cables, as well as water-filled plastic pipes. Cavities or empty plastic pipes may not be displayed.Bosch Power Tools 1 609 92A 7JX | (10.05.2022)20 | EnglishWall Type <Horizontal Coring Brick>The <Horizontal Coring Brick> wall type is especially suitable for applications in hori-zontally perforated bricks. Horizontally perforated bricks are bricks with a few, mostly horizontal, cavities. It displays flat lying metal objects, electrical and other cables, as well as water-filled plastic pipes up to a maximum measuring depth of 5 cm. Cavities or empty plastic pipes may not be displayed.Wall Type <Early Age Concrete>The <Early Age Concrete> wall type is especially suitable for applications in concrete which has not yet fully cured and dried. Metal objects are displayed up to a maximum measuring depth of 6 cm. Plastic pipes and cables may not be displayed. A distinction between live and voltage-free conductors is not possible.Please observe that concrete requires several months to cure and dry completely. Change the viewTo change the view, repeatedly press the top (17) or bottom select button (12) until the required view is displayed. Press the red start button (16) to accept the selection.<Spot View>In the <Spot View>, a first measuring result is already displayed without moving the measuring tool over the substrate. It is therefore particularly suitable for measurements in corners or narrow places. The maximum measuring depth is 6 cm. Objects found are displayed with material properties, if available, but without depth information. Whenever possible, you should also move the measuring tool over the substrate inthe <Spot View> to ensure the best possible measurements. Locating plastic pipes and timber joints is particularly limited without moving the measuring tool.1 609 92A 7JX | (10.05.2022)Bosch Power ToolsEnglish | 21 Measuring indicator:If no object is found, only the outer circle will appear on the display and it will light up green.If there is an object nearby, the outer circle will light up red. The closer the measuring tool is to an object, the more the deflection in the measuring indicator (number of circles) will increase. The deflection decreases when the measuring tool moves away from the object.Orientation arrows are displayed if the signal strength is sufficient. To specifically locate the object's centre, move the measuring tool in the direction of the orientation arrows. Above the centre of an object, the measuring indicator will exhibit maximum deflection, and with sufficient signal strength, a centre cross is displayed. The colour coding for the material property is identical to that in the <Object View>.If the orientation arrows or the centre cross are not displayed, an object may neverthe-less be located in the immediate vicinity.<Object View>The <Object View> offers the best possible measuring results and the maximum meas-uring depths. The detected objects are displayed over the measuring path with depth in-formation and, if available, with material properties.Measuring process:–Place the measuring tool on the substrate and move it over the substrate in the direc-tion of travel. The measuring results are shown on the display after a minimum meas-uring path of approx. 10 cm.–Always move the measuring tool in a straight line while applying light pressure over the substrate so that the wheels remain in contact with the wall.Bosch Power Tools 1 609 92A 7JX | (10.05.2022)22 | English–To obtain optimum measuring results, move the measuring tool slowly over the entire area to be checked and observe the measuring results as you move the tool back. The measuring path should be at least 40 cm.–You can start a new measurement at any time by pressing the red start button (16).–If you lift the measuring tool away from the wall during the measuring process, the last measuring result obtained remains on the display. The measurement is restarted when the device is set down or moved.The tool's function allows for reliable detection of the nearest edges of objects that run transverse to the direction of movement of the measuring tool (see figure C). For this reason, always move crosswise over the area to be checked.To locate objects, moving the measuring tool once over the measuring path is sufficient. To identify the exact location of a detected object and to mark the object, move the measuring tool back over the measuring path.The direction of a found object in a wall can be determined by moving along several off-set measuring paths one after another.Measuring indicator:If no object was detected in the sensor range, the dashed lines and the centre line are completely green.If an object was detected under the sensor, it will appear in the sensor range between the two dashed lines of the display. The two dashed lines and the centre line are at least partially red.In the right-hand depth scale, the object depth to the nearest edge of the found object is displayed.The representation of the properties of detected objects in the display can deviate from the actual object properties. In particular, very thin objects appear thicker on the dis-play. Larger, cylindrical objects (e.g. plastic pipes or water pipes) may appear narrower on the display than they actually are.Depending on type and depth of the object, identification of the material is possible. TheInformation on material identification:–For live objects, no further characteristic is displayed.1 609 92A 7JX | (10.05.2022)Bosch Power ToolsEnglish | 23–Three-phase mains wiring may not be detected as live conductors.–At a relative humidity above 50 %, detecting the "live" property may be limited. Marking objects:–If you want to mark a found object on the substrate, move the measuring tool so that the object is centred on the centre line in the display. Use the upper marking aid (1) as well as the left-hand and right-hand marking aid (5) to make a mark on the sub-strate. The centre of the object is located at the intersection point of the drawn mark-ers.–Alternatively, move the measuring tool to the left or right until the found object is centered on one of the two dashed lines in the display. Then it is located under the corresponding outer edge of the measuring tool. Draw a line along this outer edge on the substrate and mark the position of the corresponding lateral marking aid (5) on this line. This is the centre of the object.–The direction of a found object in a wall can be marked by moving along several offset measuring paths one after another and connecting the respective markings.<Signal View 2D>The <Signal View 2D> indicates the signal strength at each measuring point in combina-tion with the object depth. The <Signal View 2D> is a variant of the <Object View>. It displays signal strengths instead of object symbols. The maximum signal strength rep-resents the upper edge of the objects.The <Signal View 2D> can be used to locate closely adjacent objects and to better as-sess complicated material structures. Weaker objects and objects in a row can also be found under certain circumstances.Follow the instructions on the measuring process in <Object View>.Bosch Power Tools 1 609 92A 7JX | (10.05.2022)。
百斯特培训资料
4.1 BVK系列乘客电梯土建图
4.2 BVKW快速梯系列乘客电梯土建图
4.3 BVKW小机房系列乘客电梯土建图
4.4 BVKW高速梯系列乘客电梯土建图
4.5无机房直梁系列电梯土建图
4.6无机房斜梁系列电梯土建图
4.7 BGG圆形观光电梯土建图
1门部分门部件类别厅轿门小门套大门套申菱中分010203040506西尔康中分070809101112奥古斯塔中分131415展鹏中分161718192021控制柜部分控制柜类别变频客梯无机房变频货梯交流双速货梯杂物梯对应部件号0102030405井道部件部件名称主轨支架副轨支架缓冲器底座对重防护栏高速梯补偿装置对应部件号0102030405通用件部件名称对应部件号部件名称对应部件号导向轮组装01其他09反绳轮组装02木夹板10轿顶检修箱03曳引轮防护罩11底坑检修盒04无机房专用12平层装置05导向轮轴架15限位装置0616补偿装置07斜拉杆17爬梯08如
3.5住宅电梯
供居民住宅楼使用的电梯。主要运送乘客，也可运送家用物件或生活用品，多为有司机操作，额定载重量为450、630、800、1000kg等，其相应的载客人数为5、8、10、13人等，速度在低、快速之间。
3.6杂物电梯(服务电梯)
供运送一些轻便的图书、文件、食品等，但不允许人员进入轿厢，由厅外按钮控制，额定载重量有100、250kg等数种，轿厢的运行速度通常小于0．5m／s。
（3）液压电梯
依靠液压驱动的电梯。根据柱塞安装位置有柱塞直顶式，其油缸柱塞直接支撑轿厢底部，使轿厢升降，有柱塞侧置式，其油缸柱塞设置在井道侧面，借助曳引绳通过滑轮组与轿厢连接，使轿厢升降，梯速常为1m／s以下。
DLT德力通产品推介说明
DLTK系列乘客电梯产品推介说明一、公司简介湖南德力通电梯有限公司是一家集电梯的研发、制造、销售、安装和维保于一体的综合性企业。
公司座落于南北重要的交通枢纽湖南株洲，水陆交通通讯十分便利。
厂区占地2.5公顷，设有现代化车间（垂直电梯及自动扶梯生产流水线）和国际先进的专业检测、机械加工设备、研发中心等；拥有一批高素质的专业技术人才。
具备年产各类垂直电梯3500台、自动扶梯1000台的生产规模。
目前本厂产品已覆盖全国二十多个省市，并在长沙、广州、深圳、泉州、桂林、扬州、合肥、成都、兰州、潍坊等地设立了办事处及售后服务网点，负责本公司产品在当地的销售及售后服务工作。
德力通电梯有限公司与一些国际著名电梯配件厂商展开全面合作，专业从事高科技、数字化电梯的研究与开发，是世界电梯无机房、无齿轮高科技应用领域内的领先者。
让"用户满意"是德力通人的无上追求，质量与信誉是公司的一贯宗旨。
在生产质量控制与安装、服务过程中严格执行ISO9001-2000与ISO14000、OHSAS18000等相关国际标准管理体系，配备有专业的安装和服务队伍，设立了24小时服务的服务热线，建立起了辐射全国的服务网络和迅捷的备品备件供应体系，为客户提供全方位的服务与支持。
我们热情欢迎宾客用户惠顾、咨询、洽谈订货。
二、产品介绍DLTK系列乘客电梯，是湖南德力通电梯有限公司推出的最新一代高科技绿色环保产品，它具有高效节能、低噪声、无（齿轮箱）油污染、无电源电网污染等优点。
一、最先进的永磁同步拖动系统DLTK系列乘客电梯，采用国际上最先进的永磁同步变频调速拖动技术。
永磁同步电机不需要无功励磁电流，定子铜耗小，功率因素高，并具有低速性、快速性、硬机械特性、停车自闭等优点。
同时，永磁同步电机正常工作时不产生谐波干扰，对电源电网无污染。
二、平稳高效的无齿轮曳引系统DLTK系列乘客电梯，采用无齿轮曳引技术，没有齿轮啮合，彻底消除了齿轮机械传动的振动和噪声，使电梯运行更加平稳，噪声大为降低。
新疆饮用水放射性水平现状调查
新疆饮用水放射性水平现状调查席禄明【摘要】通过调查新疆各地州市主要城市饮用水总α、总β放射性水平,人们可以掌握新疆主要人群饮用水总α、总β放射性水平状态,为评估新疆环境辐射水平提供依据.本文采集新疆14个地州市饮用水样品,经蒸发浓缩等前处理,用MPC9604低本底α、β计数器测量,得到新疆14个地州市饮用水放射性水平状况.结果表明,新疆饮用水放射性水平基本处于正常环境本底范围,通过对新疆14个地州市饮用水总α、总β放射性水平的调查,为应急情况下快速监测评估放射性污染等工作提供科学数据.【期刊名称】《中国资源综合利用》【年(卷),期】2018(036)004【总页数】3页(P29-31)【关键词】新疆;地州市;饮用水;总α;总β;放射性水平调查【作者】席禄明【作者单位】新疆辐射环境监督站,乌鲁木齐 830000【正文语种】中文【中图分类】R123.1随着社会的发展和生产力的进步，人们对能源的需求日益增加，在开发新型能源的过程中，核能逐渐走上历史舞台，放射源也广泛应用于工业、农业、医疗卫生等各个行业，由此带来的电离辐射污染开始受到人们关注。
水是人类生产生活必不可少的基础资源，水源的污染直接影响人类的生存，放射性污染也是水污染中非常重要的一部分[1]。
因此，有必要对饮用水中可造成内照射的主要因素（总α、总β的放射性水平）进行调查。
目前，我国缺乏对饮用水的放射性分析数据。
为此，笔者于2017年对新疆14个地州市城市饮用水进行调查分析，为了解新疆饮用水放射性水平提供参考依据，为新疆应急监测提供数据支持。
1 测量仪器与方法本文对新疆14个地州市城市饮用水总α、总β放射性水平进行了调查监测[2]。
1.1 测量仪器本次对新疆14个地州市饮用水的总α、总β放射性水平调查，采用了由美国奥泰克公司生产的MPC9604型低本底α、β计数器。
本仪器为四路流气式低本底α、β计数器，以气体作为电离和激发的介质，经过放大，形成电子脉冲，经过计算机处理，得到结果[3]。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
●Designed for Complementary Use with BDT60, BDT60A, BDT60B and BDT60C ●50 W at 25°C Case Temperature ● 4 A Continuous Collector Current ●
Minimum h FE of 750 at 1.5 V, 3 A
absolute maximum ratings at 25°C case temperature (unless otherwise noted)
NOTES:1.Derate linearly to 150°C case temperature at the rate of 0.4 W/°C.
2.Derate linearly to 150°C free air temperature at the rate of 16 mW/°C.
RATING
SYMBOL
VALUE UNIT
Collector-base voltage (I E = 0)
BDT61
BDT61A BDT61B BDT61C V CBO 6080100120V Collector-emitter voltage (I B = 0)BDT61
BDT61A BDT61B BDT61C
V CEO 6080100120V Emitter-base voltage V EBO 5V Continuous collector current I C 4A Continuous base current
I B 0.1A Continuous device dissipation at (or below) 25°C case temperature (see Note 1)P tot 50W Continuous device dissipation at (or below) 25°C free air temperature (see Note 2)P tot 2W Operating junction temperature range T j -65 to +150°C Storage temperature range
T stg -65 to +150°C Operating free-air temperature range
T A -65 to +150
°C
NOTES:3.These parameters must be measured using pulse techniques, t p = 300 µs, duty cycle ≤ 2%.
4.These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts.
† Voltage and current values shown are nominal; exact values vary slightly with transistor parameters.
electrical characteristics at 25°C case temperature (unless otherwise noted)
P ARAMETER TEST CONDITIONS
MIN TYP
MAX
UNIT
V (BR)CEO
Collector-emitter breakdown voltage
I C = 30 mA I B = 0(see Note 3)
BDT61
BDT61A BDT61B BDT61C 6080100120
V
I CEO
Collector-emitter cut-off current
V CE =30V
V CE =40V V CE =50V V CE =60V I B =0I B =0I B =0I B =0BDT61BDT61A BDT61B BDT61C 0.50.50.50.5mA I CBO
Collector cut-off current
V CB =60V V CB = 80 V V CB = 100 V
V CB = 120 V V CB =30V V CB = 40 V V CB = 50 V V CB = 60 V
I E =0I E =0I E =0I E =0I E =0I E =0I E =0I E =0T C = 150°C T C = 150°C T C = 150°C T C = 150°C BDT61BDT61A BDT61B BDT61C BDT61BDT61A BDT61B BDT61C
0.20.20.20.22.02.02.02.0mA I EBO Emitter cut-off current V EB = 5 V I C =05
mA h FE Forward current transfer ratio V CE = 3 V I C =1.5A (see Notes 3 and 4)750
V CE(sat)Collector-emitter saturation voltage I B = 6 mA I C =1.5A (see Notes 3 and 4) 2.5V V BE(on)Base-emitter voltage V CE = 3 V
I C =1.5A
(see Notes 3 and 4)
2.5
V V EC
Parallel diode
forward voltage
I E = 1.5 A I B = 02V
thermal characteristics
P ARAMETER
MIN
TYP
MAX UNIT R θJC Junction to case thermal resistance 2.5°C/W R θJA
Junction to free air thermal resistance
62.5
°C/W
resistive-load-switching characteristics at 25°C case temperature
P ARAMETER TEST CONDITIONS †MIN
TYP MAX
UNIT t on T urn-on time I C = 2 A V BE(off) = -5 V
I B(on) = 8 mA R L = 20 Ω
I B(off) = -8 mA t p = 20 µs, dc ≤ 2%
1µs t off
T urn-off time
4.5
µs。