TR-3446_7-Mode SnapMirror Async Overview and Best Practices Guide (2)
ASUS ROG SWIFT PG279Q 产品说明书
Display Video Feature Audio Features Convenient Hotkey I/O Ports Panel Size: Wide Screen 27.0"(68.6cm) 16:9Color Saturation : 100%(sRGB)Panel Backlight / Type : In-Plane SwitchingTrue Resolution : 2560x1440 *Display Surface Non-glarePixel Pitch : 0.233 mmBrightness(Max) : 350 cd/㎡Contrast Ratio (Max) : 1000:1Viewing Angle (CR ≧10) : 178°(H)/178°(V)Response Time : 4ms (Gray to Gray)Display Colors : 16.7M (real 8 bit)Flicker freeRefresh Rate(max) : 165Hz*Trace Free Technology : YesColor Temperature Selection : 4 ModesGamePlus(modes) : Yes (Crosshair/Timer/FPS Counter)Low Blue Light : YesHDCP support : YesGameVisual :6 Modes(Scenery/Racing/Cinema/RTS/RPG/FPS/sRGB Modes)G-SYNC™Stereo Speakers : 2W x 2 Stereo RMSGamePlus5-way OSD Navigation JoystickTurbo keySignal Input : HDMI, DisplayPortEarphone jack : 3.5mm Mini-JackUSB Port(s) : 3.0x21ROG SWIFT PG279QProducts What´s New Commercial SupportStoreSignal Frequency Power Consumption Mechanical Design Security Dimensions Weight Accessories Compliance and Standards Digital Signal Frequency : DisplayPort ：34 ~209KHz (H) /30 ~165 Hz(V)HDMI : 30 ~140 KHz (H) /24 ~60 Hz(V)Power On: <90WPower Saving/Off:0.5WVoltage: 100-240V, 50/60HzChassis Colors : BlackTilt : +20°~-5°Swivel : +60°~-60°Pivot : 0°~+90°Height Adjustment : 0~120 mmVESA Wall Mounting : 100x100mmSuper Narrow Bezel Design : YesKensington lockPhys. Dimension with Stand(WxHxD): 619.77x552.53x237.9mmPhys. Dimension without Stand(WxHxD): 619.77x362.96x65.98 mm(For VESAWall Mount)Box Dimension (WxHxD): 756x456x300 mmNet Weight(Esti.): 7.0kgGross Weight(Esti.):10.6kgPower cordPower adapterDisplayPort cableUSB 3.0 cableQuick start guideHDMI cableSupport CDWarranty CardBSMI, CB, CCC, CE, CEL level 1, ErP, FCC,J-MOSS, KCC, PSE, RoHS, UL/cUL, VCCI, WEEE, WHQL (Windows 8.1, Windows8, Windows 7), RCM, TUV Flicker-free , eStandby, TUV Low Blue LightNote Privacy Policy Terms of Use Notice ©ASUSTeK Computer Inc. All rights reserved.*1) Refresh RateDisplayPort: 2560x1440(up to 165Hz)HDMI: 2560x1440(60Hz)All specifications are subject to change without notice. Please check with your supplier for exact offers. Products may not be available in all markets.PCB color and bundled software versions are subject to change without notice.Brand and product names mentioned are trademarks of their respective companies.United States / EnglishWant More?Who We AreNeed Help?Community。
同步 SnapMirror 和半同步 SnapMirror 概述
5
附录 ................................................................................................................................... 18
5.1 5.2 5.3 通过 SNAPMIRROR 进行故障转移和故障恢复 ................................................................................... 18 计划故障转移（无灾难） ..................................................................................................................... 18 实际发生灾难时进行故障转移 .............................................................................................................. 19
NETAPP 技术报告
同步 SnapMirror 和半同步 SnapMirror 概述与 设计注意事项
2012 年 11 月 | TR 3326 | 2.7 版
针对 Data ONTAP 8.1 7-模式进行了更新
摘要
本指南概述了 NetApp® SnapMirror® 同步和半同步技术并详细介绍了实施和使用方法。对于在理解同步 SnapMirror 和 NetApp 存储系统以及使用它们部署解决方案方面需要帮助的客户，本指南会OR 和半同步 SNAPMIRROR 基础知识 ................................................... 7
Datavideo技术100M SDI重复器（有电源 无电源）产品说明书
VP-633/ VP-634VP-633VP-634100M SDI REPEATER (POWERED/ UNPOWERED)Instruction ManualTable of ContentsFCC COMPLIANCE STATEMENT (4)WARNINGS AND PRECAUTIONS (4)WARRANTY (6)S TANDARD W ARRANTY (6)T HREE Y EAR W ARRANTY (7)DISPOSAL (7)CONNECTIONS (9)SPECIFICATIONS (10)TYPICAL CABLE LENGTH PERFORMANCE (10)NOTES (11)SERVICE & SUPPORT (12)Disclaimer of Product & ServicesThe information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions or incorrect information. Datavideo Technologies always recommend that you double check the information in this document for accuracy before making any purchase decision or using the product. Datavideo Technologies is not responsible for any2omissions or errors, or for any subsequent loss or damage caused by using the information contained within this manual. Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or dealer.3FCC Compliance StatementThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interferencethat may cause undesired operation.Warnings and Precautions1.Read all of these warnings and save them for later reference.2.Follow all warnings and instructions marked on this unit.3.Unplug this unit from the wall outlet before cleaning. Do notuse liquid or aerosol cleaners. Use a damp cloth for cleaning.4.Do not use this unit in or near water.5.Do not place this unit on an unstable cart, stand, or table. The unit mayfall, causing serious damage.6.Slots and openings on the cabinet top, back, and bottom are provided forventilation. To ensure safe and reliable operation of this unit, and to protect it from overheating, do not block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat register or radiator. This unit should not be placed in a built-in installation unless proper ventilation is provided.7.This product should only be operated from the type of power sourceindicated on the marking label of the AC adapter. If you are not sure of thetype of power available, consult your Datavideo dealer or your local powercompany.48.Do not allow anything to rest on the power cord. Do not locate this unitwhere the power cord will be walked on, rolled over, or otherwise stressed.9.If an extension cord must be used with this unit, make sure that the totalof the ampere ratings on the products plugged into the extension cord do not exceed the extension cord rating.10.Make sure that the total amperes of all the units that are plugged into asingle wall outlet do not exceed 15 amperes.11.Never push objects of any kind into this unit through the cabinetventilation slots, as they may touch dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill liquid of any kind onto or into this unit.12.Except as specifically explained elsewhere in this manual, do not attemptto service this product yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to dangerous voltage points or other risks, and will void your warranty. Refer all service issues to qualified service personnel.13.Unplug this product from the wall outlet and refer to qualified servicepersonnel under the following conditions:a.When the power cord is damaged or frayed;b.When liquid has spilled into the unit;c.When the product has been exposed to rain or water;d.When the product does not operate normally under normal operatingconditions. Adjust only those controls that are covered by theoperating instructions in this manual; improper adjustment of othercontrols may result in damage to the unit and may often requireextensive work by a qualified technician to restore the unit to normaloperation;5e.When the product has been dropped or the cabinet has beendamaged;f.When the product exhibits a distinct change in performance,indicating a need for service.WarrantyStandard Warranty∙Datavideo equipment are guaranteed against any manufacturing defects for one year from the date of purchase.∙The original purchase invoice or other documentary evidence should be supplied at the time of any request for repair under warranty.∙The product warranty period begins on the purchase date. If the purchase date is unknown, the product warranty period begins on the thirtieth day after shipment from a Datavideo office.∙All non-Datavideo manufactured products (product without Datavideo logo) have only one year warranty from the date of purchase.∙Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered under warranty.∙Viruses and malware infections on the computer systems are not covered under warranty.∙Any errors that are caused by unauthorized third-party software installations, which are not required by our computer systems, are not covered under warranty.∙All mail or transportation costs including insurance are at the expense of the owner.∙All other claims of any nature are not covered.67∙All accessories including headphones, cables, and batteries are not covered under warranty. ∙Warranty only valid in the country or region of purchase. ∙ Your statutory rights are not affected.Three Year Warranty∙ All Datavideo products purchased after July 1st,2017 are qualified for a free two years extensionto the standard warranty, providing the productis registered with Datavideo within 30 days ofpurchase.∙ Certain parts with limited lifetime expectancy such as LCD panels, DVD drives, Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are covered for 1 year.∙The three-year warranty must be registered on Datavideo's official website or with your local Datavideo office or one of its authorized distributors within 30 days of purchase. DisposalFor EU Customers only - WEEE MarkingThis symbol on the product or on its packaging indicatesthat this product must not be disposed of with yourother household waste. Instead, it is your responsibilityto dispose of your waste equipment by handing it overto a designated collection point for the recycling ofwaste electrical and electronic equipment. The separatecollection and recycling of your waste equipment at thetime of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.Formore information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.CE Marking is the symbol as shown on the left of this page. Array The letters "CE" are the abbreviation of French phrase"Conformité Européene" which literally means "EuropeanConformity". The term initially used was "EC Mark" and itwas officially replaced by "CE Marking" in the Directive93/68/EEC in 1993. "CE Marking" is now used in all EU official documents.89ConnectionsSDI InputBNC connector for SDI Input.SDI OutputBNC connector for SDI output.DC in socketConnect the supplied 12~25V PSU to this socket. The connection can be secured by screwing the outer fastening ring of the DC In plug to the socket.SpecificationsInput / Output 1.5G, SD / 1.5G, SDSupported SDI Formats HD-SDI (SMPTE 292M) SD-SDI (SMPTE 259M)Supported Video Formats HD formats: 1080i 50/60, 720P50/60SD formats: 625i(PAL) / 525i (NTSC)Audio YesPlug and Play Yes Impedance 75 OhmDC In 12~25V Max. PowerConsumption1.08W Typical Cable Length Performance Data Rate 5CFB (M)**************/s200MSD-SDI@270Mb/s 200M10Notes11/product/VP-633Datavideo Technologies Co., Ltd. All rights reserved 2020Jul-14.2020 Ver: E4。
NAVIGATOR说明书
navigator使用说明书第一步：设备连接笔记本用网线连接到ptn950/910的eth/oam,打开”optix navigator.exe”软件。
第二步：设置主机ip点search按钮可以搜索网关网元的ip地址，所有搜索到的ip地址都在ne ip address组合框中，点最右边的下拉箭头可以查看搜索到的所有网关网元的ip地址，点connect将和显示在ne ip address编辑框中的ip地址建立通信连接。
（事先在网管上查找该ptn950/910网元ip，设置主机ip与网元ip同一网段，如果不知道，可以查找该网元所在上下相邻网元ip，例如设置笔记本ip为129.9.108.177）第一栏是要登录的网元id ，第二栏要登录的用户名，第三栏是要登录的密码，点击”ok”,进入配置界面。
如下图：显示网元id，名称，当前时间等。
第三步：配置数据（下面全用会展中心2的eg3-1端口举例说明）1、查询当前dcn端口状态：输入命令“:cm-get-pppoeinfo;”回车键运行。
2、 bid当前槽位号，subcard默认255,pid为对应端口号，pppoestat显示当前dcn端口状态，ready表示为使能状态，如果无该端口说明为禁止状态。
例如：会展中心2的3-1端口没有显示，说明该端口为禁止状态。
3、可以用“:dcn-cfg-get-dcnifen:3,255,1,0,ethdcnif;”命令查询当前端口状态，“disable”为禁止状态，“enable”为使能状态。
例如：会展中心3-1当前为“disable”为禁止状态。
4、输入“:dcn-cfg-set-dcnifen:3,255,1,0,ethdcnif,enable;”调整当前端口为使能状态，调整后用命令“:cm-get-pppoeinfo;”查询如下：3-1端口显示,说明该端口已经为使能状态。
5、再次输入“:dcn-cfg-get-dcnifen:3,255,1,0,ethdcnif;”命令查询当前端口状态。
Tripp Lite U344-001-HDMI-R USB 3.0 外部多监视器适配器说明说明书
CONTROLADORES DE DISPOSITIVOSEste producto ya no incluye un CD-ROM con controladores. Los controladores más recientes para Windows, macOS, Android, Chrome OS y Ubuntu están disponibles en el sitio web de DisplayLink. Visite por favor https:///downloads.Adaptador de Tarjeta Gráfica Externa de Video USB 3.0 SuperSpeed a Monitor HDMI Doble, SDRAM de 512 MB - 2048 x 1152, 1080pNÚMERO DE MODELO:U344-001-HDMI-RGeneralEl Adaptador Externo de Video USB 3.0 a Monitor Múltiple HDMI U344-001-HDMI-R de Tripp Lite le permite conectar un monitor adicional o un proyector al puerto USB 3.0 de su computadora/laptop. Pueden usarse simultáneamente hasta seis adaptadores, permitiendo al usuario conectar hasta seis monitores adicionales a una sola computadora. Una vez realizada la instalación, la pantalla de la computadora aparece en el(los) monitor(es) adicional(es) sin la molestia de usar teclas de función para cambiar a un segundo monitor. Soporta resoluciones de video hasta 2048 x 1152 (60Hz), 1080p (60Hz). Compatible con Windows y Mac con Intel.CaracterísticasAgregue un monitor HDMI o TV adicional mediante un solo puerto USB 3.0qUtilice simultáneamente hasta seis adaptadores, agregando hasta seis monitores/TVs adicionales a una sola computadora.qVea grandes hojas de cálculo a través de pantallas múltiples extendiendo el video entre todos los monitoresqReproduzca video en un monitor mientras trabaja en otroqRealice presentaciones en múltiples pantalla desde una laptopqAlimentado por bus... no se necesita un adaptador de energía externaqCuenta con una memoria SDRAM de 512MB DDR2qSoporta resoluciones de video hasta 2 048 x 1 152 (60Hz), 1 080p (60Hz)qCompatible con Windows 7 y posterior. Soporta 32 y 64 bits.qSoporta tabletas Surface™ que utilicen Windows 8, 8.1 y 10 no RTqCompatible con Intel Mac OS X 10.8.5 y posterior; soporta Mac 10.11. Soporta tanto 32 como 64 bits. q DestacadoConecte una TV HDMI a unpuerto USB 3.0 de unacomputadoraqPueden agregarse hasta seisadaptadores a una computadora qIncluye una memoria SDRAMde 512MB DDR2qSoporta resoluciones de videode hasta 2048 x 1152 (60Hz),1080p (60Hz)qCompatible con Windows y Mac con IntelqCompatible con Ubuntu 14.04.2 qRequisitos del SistemaCompatible con Windows 7 yposterior. Soporta tanto 32como 64 bits.qSoporta tabletas Surface™ queutilicen Windows 8, 8.1 y 10 noRTqCompatible con Intel Mac OS X10.8.5 y posterior, Mac 10.11.Soporta tanto 32 como 64 bits. qPara los requisitos del sistemaal usar múltiples adaptadores oal usar el monitor agregado para reproducción de DVD, consulteel manual del propietario.qEl Paquete Incluye(1) U344-001-HDMI-Rq(1) Unidad de CDq(1) Cable USB 3.0q(1) Manual del PropietarioqEspecificacionesUtiliza el Circuito Integrado DisplayLink DL3500q© 2023 Eaton. All Rights Reserved.Eaton is a registered trademark. All other trademarksare the property of their respective owners.。
海康威视32路IP摄像头系统说明书
Key Feature● Up to 32-ch IP camera inputs, plug & play with 16 power-over-Ethernet (PoE) interfaces● H.265+/H.265/H.264+/H.264 video formats● Up to 2-ch@12 MP or 3-ch@8 MP or 6-ch@4 MP or 12-ch@1080p decoding capacity● Up to 256 Mbps incoming bandwidth● Adopt Hikvision Acusense technology to minimize manual effortand security costsSmart Function● All channels support Motion Detection 2.0● 2-ch video analysis for human and vehicle recognition to reduce false alarm ● 1-ch facial recognition for video stream, or 4-ch facial recognition for face picture● Smart search for the selected area in the video, and smart playback to improve the playback efficiencyProfessional and Reliability● H.265+ compression effectively reduces the storage space by up to 75%● Adopt stream over TLS encryption technology which provides more secure stream transmission serviceHD Video Output● Provide independent HDMI and VGA outputs ● HDMI video output at up to 4K resolutionStorage and Playback● Up to 2 SATA interfaces for HDD connection (up to 10 TB capacity per HDD)● 16-ch synchronous playbackNetwork & Ethernet Access● 16 independent PoE network interfaces● 1 self-adaptive 10/100/1000 Mbps Ethernet interface ● Hik-Connect for easy network managementSpecificationIntelligent AnalyticsAI by Device Facial recognition, perimeter protection, motion detection 2.0AI by Camera Facial recognition, perimeter protection, throwing objects from building, motion detection2.0, ANPR, VCAFacial RecognitionFacial Detection and Analytics Face picture comparison, human face capture, face picture searchFace Picture Library Up to 16 face picture libraries, with up to 20,000 face pictures in total (each picture ≤ 4 MB, total capacity ≤ 1 GB)Facial Detection and Analytics Performance1-ch, 8 MP Face Picture Comparison4-ch Motion Detection 2.0By Device All channels, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analysis for human and vehicle recognition to reduce false alarmBy Camera All channels Perimeter ProtectionBy Device 2-ch, 4 MP (HD network camera, H.264/H.265) video analysis for human and vehicle recognition to reduce false alarmBy Camera All channels Video and AudioIP Video Input32-ch Incoming Bandwidth256 Mbps Outgoing Bandwidth160 MbpsHDMI Output 1-ch, 4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz, 1024 × 768/60 HzVGA Output1-ch, 1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 HzVideo Output Mode HDMI/VGA independent outputCVBS Output N/AAudio Output1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)Two-Way Audio1-ch, RCA (Linear, 1 KΩ)DecodingDecoding Format H.265/H.265+/H.264+/H.264Recording Resolution12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Synchronous playback16-chDecoding Capability AI on: 1-ch@12 MP (30 fps)/2-ch@8 MP (30 fps)/4-ch@4 MP (30 fps)/8-ch@1080p (30 fps)AI off: 2-ch@12 MP (30 fps)/3-ch@8 MP (30 fps)/6-ch@4 MP (30 fps)/12-ch@1080p (30 fps)Stream Type Video, Video & AudioAudio Compression G.711ulaw/G.711alaw/G.722/G.726/AACNetworkRemote Connection128API ONVIF (profile S/G); SDK; ISAPICompatible Browser IE11, Chrome V57, Firefox V52, Safari V12, Edge V89, or above versionNetwork Protocol TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPSNetwork Interface 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface PoEInterface16, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power≤ 200 WStandard IEEE 802.3af/atAuxiliary InterfaceSATA 2 SATA interfacesCapacity Up to 10 TB capacity for each HDDUSB Interface Front panel: 1 × USB 2.0; Rear panel: 1 × USB 2.0Alarm In/Out4/1GeneralGUI Language English, Russian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Turkish, Japanese, Danish, Swedish Language, Norwegian, Finnish, Korean, Traditional Chinese, Thai, Estonian, Vietnamese, Croatian, Slovenian, Serbian, Latvian, Lithuanian, Uzbek, Kazakh, Arabic, Ukrainian, Kyrgyz , Brazilian Portuguese, IndonesianPower Supply100 to 240 VAC, 50 to 60 HzConsumption≤ 15 W (without HDD and PoE off)Working Temperature-10 °C to 55 °C (14 °F to 131 °F)Working Humidity10% to 90%Dimension (W × D × H)385 mm × 315 mm × 52 mm (15.2"× 12.4" × 2.0") Weight≤ 3 kg (without HDD, 6.6 lb.)CertificationFCC Part 15 Subpart B, ANSI C63.4-2014CE EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: 2017 Obtained Certification CE, FCC, IC, CB, KC, UL, Rohs, Reach, WEEE, RCM, UKCA, LOA, BISNote:Facial recognition, motion detection 2.0 or perimeter protection cannot be enabled at the same time.DimensionPhysical InterfaceNo.Description No.Description 1Network interfaces with PoE function7VGA interface 2LAN network interface8USB interface 3AUDIO IN9GND4AUDIO OUT10Power supply 5ALARM IN and OUT11Power switch 6HDMI interfaceAvailable ModelDS-7632NXI-K2/16P。
AXIS P1367网络摄像头用户手册.pdf_1711282219.3963156说明书
AXIS P1367Network CameraAXIS P1367Network CameraF101-A XF P1367Explosion-protected Camera ExCam XF P1367Explosion-protected Camera用户手册目录解决方案概述 (3)产品概述 (4)在网络上查找设备 (5)访问设备 (5)安全密码 (5)其他设置 (7)需要更多帮助？关于摄像机的内置帮助 (7)更换镜头 (7)使用隐私遮罩隐藏图像的某些部分 (7)在低照度条件下降低噪声 (8)选择曝光模式 (8)尽可能增加图像细节 (9)监控窄长区域 (9)验证像素分辨率 (10)视点区域 (10)处理具有强背光的场景 (11)当设备侦测到移动时，显示视频流中的文本叠加 (12)比特率控制 (13)视频压缩格式 (15)降低带宽和存储 (15)设置网络存储 (16)向录像添加音频 (16)录制并观看视频 (16)设置规则和警报 (17)触发操作 (17)当摄像机侦测到移动时录制视频 (17)应用程序 (19)故障排查 (20)重置为出厂默认设置 (20)检查当前固件 (21)升级固件 (22)技术问题、线索和解决方案 (23)性能考虑 (25)规格 (26)LED指示灯 (26)SD卡插槽 (28)按钮 (29)连接器 (29)工作条件 (36)功耗 (36)解决方案概述解决方案概述产品概述产品概述1microSD卡插槽2LED状态指示灯3内置麦克风4变焦拉杆5对焦环的锁定螺丝6对焦环7电源连接器(DC)8I/O连接器9光圈连接器10RS485/422连接器11电源LED12网络LED13控制按钮14安全锁槽15音频输入16音频输出17网络连接器(PoE)在网络上查找设备在网络上查找设备若要在网络中查找Axis设备并为它们分配Windows®中的IP地址，请使用AXIS IP Utility或AXIS设备管理器。
Infoprint 250 導入と計画の手引き 第 7 章ホスト
SUBNETMASK
255.255.255.128
Type of service...............: TOS
*NORMAL
Maximum transmission unit.....: MTU
*LIND
Autostart.....................:
AUTOSTART
*YES
: xx.xxx.xxx.xxx
: xx.xxx.xxx.xxx
*
(
)
IEEE802.3
60 1500
: xxxx
48 Infoprint 250
31. AS/400
IP
MTU
1
1
IPDS TCP
CRTPSFCFG (V3R2)
WRKAFP2 (V3R1 & V3R6)
RMTLOCNAME RMTSYS
MODEL
0
Advanced function printing............:
AFP
*YES
AFP attachment........................:
AFPATTACH
*APPC
Online at IPL.........................:
ONLINE
FORMFEED
*CONT
Separator drawer......................:
SEPDRAWER
*FILE
Separator program.....................:
SEPPGM
*NONE
Library.............................:
NI PXI定时与同步模块说明书
CONTENTSPXI Timing and Synchronization Modules Detailed View of PXIe-6674TKey FeaturesNI-Sync Application Programming Interface (API) Platform-Based Approach to Test and Measurement PXI InstrumentationHardware ServicesPXI Timing and Synchronization Modules PXIe-6674T, PXIe-6672, PXI-6683 and PXI-6683H•Generate high-stability PXI system reference clocks and high-resolution sample clocks •Minimize skew through access to PXI-star and PXIe-Dstar chassis trigger lines •Import and export system reference clocks for synchronization between multiple chassis orexternal devices •Achieve synchronization over large distance through GPS, IEEE 1588,IRIG-B or PPS•Develop advanced timing and sync applications with NI-Sync and NI-TClk softwarePowerful, Reliable Timing and SynchronizationNI’s PXI timing and synchronization modules enable a higher level of synchronization on the PXI platform through high-stability clocks, high-precision triggering and advanced signal routing. Implementing timing and synchronization hardware can vastly improve the accuracy of measurements, provide advanced triggering schemes, and allow synchronization of multiple devices for extremely high-channel-count applications. NI’s portfolio includes both signal-based and time-based solutions to deliver the advantages of synchronization to numerous applications.Table 1. NI offers various PXI modules to meet a range of timing and synchronization requirements.*Accuracy within one year of calibration adjustment within 0 ºC and 55 ºC operating temperature rangeDetailed View of PXIe-6674TSlot Compatibility PXI Timing or Peripheral Slot PXI or PXIe Hybrid Peripheral Slot PXIe System TimingSlot PXIe System TimingSlot Oscillator Accuracy*TCXO / 3.5 ppm TCXO / 3.5 ppm TCXO / 3.5 ppm OCXO / 80 ppb DDS Clock Generation Range Not available Not available DC to 105 MHz 0.3 Hz to 1 GHzDDS Clock Generation Resolution Not availableNot available0.075 Hz2.84 µHzPXI 10MHz Backplane Clock Override ● ● ● Clock Import Capability ● ● ● Clock Export Capability● ● ● ● Time-Based Synchronization (GPS, IEEE 1588, IRIG-B, PPS)● ● PXI Trigger Access (PXI_TRIG) ● ● ● ● PXI-Star Trigger Access (PXI_STAR) ●● ● PXIe-Dstar Trigger Access (PXI_DSTARA/B/C)● Front Panel Physical Connectors SMB, RJ45SMB, RJ45SMB SMA PFI Lines on Front Panel3366Key FeaturesHigh-Stability, High-Accuracy Onboard ClockApplications requiring highly reliable and consistent clock signals require a highly stable oscillator to avoid clock inaccuracies. For an NI PXI Express chassis, the oscillator is accurate to 25 parts per million (ppm). Inserting an NI PXI timing and synchronization module into the system timing slot of the chassis enables the user to replace this backplane system reference clock using the higher accuracy oscillator of the module. The PXIe-6672 and PXI-6683 modules contain a temperature-compensated crystal oscillator (TCXO) which can achieve accuracies better than 4 ppm. The PXIe-6674T features an oven-controlled crystal oscillator (OCXO) with an accuracy of 80 parts-per-billion (ppb). Note that the PXI-6683H contains the same oscillator as the PXI-6683, but due to its hybrid connectivity is not able to override the backplane clock.Figure 1.By referencing the OCXO on the PXIe-6674T, the 10 MHz backplane clock of a PXI chassis achieves muchlower phase noise and thus more clock stability.PXI modular instruments with phased-lock loop circuits, such as high-speed digitizers and waveform generators, can take advantage of the high-precision clock of timing and synchronization modules. When locking to a high-accuracy reference clock, the instrument inherits the accuracy of the clock, achieving sample clock resolutions as low as 0.5 Hz with an OCXO-based module.Skew Reduction with Star and Differential Star LinesDue to the variation in signal path lengths between slots in a PXI chassis, skew may be introduced when sending clocks or triggers to multiple slot destinations over the PXI trigger bus. To address this, all NI PXI chassis also include trace-length-matched star trigger lines accessible from a timing and synchronization module in the system timing slot. Star trigger lines can reduce skew to a maximum of 1 ns. Additionally, PXI Express chassis include differential star trigger lines capable of minimizing slot-to-slot skew to under 150 ps.Figure 2.While every slot of the PXI backplane may access the PXI trigger bus, the star trigger lines and differential star trigger lines are only accessible through the system timing slot.Time-Based Synchronization with GPS, IEEE 1588, IRIG-B or PPSThe NI PXI-6683 and PXI-6683H timing and synchronization modules synchronize PXI and PXI Express systems through time-based technology or protocols. Time-based modules can generate triggers and clock signals at programmable future times and timestamp input events with the synchronized system time including that of real-time systems. For PXI Express systems requiring time-based synchronization with backplane clock discipline or star trigger access, the PXI-6683H can be combined with the PXIe- 6674T or PXIe-6672 to provide a full-featured synchronization solution.Advanced Routing of Clocks and TriggersUsing a PXI timing and synchronization module provides the capability of advanced routing of clock and trigger signals. Through the combination of system timing slot access and FPGA-based routing, many more source-to-destination routes become possible, allowing more flexible designs and efficient use of system resources.Table 2. The PXIe-6674T timing and synchronization module features a wide vaiety of source-to-destination routes bycombining the power of the PXI Express architecture with the signal-routing capabilities of the onboard FPGA.● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●●●●●●●NI-Sync Application Programming Interface (API)The NI-Sync driver allows configuration of system timing and synchronization through LabVIEW, C, or .NET. This includes signal-based synchronization, such as sharing triggers and clocks to be used directly, or time-based synchronization, using time protocols such as IEEE-1588, IRIG, or GPS for non-tethered systems. NI-Sync is designed for use with other NI drivers, such as NI-DAQmx, for advanced timing, high channel count, distributed or multiple-instrument applications.DestinationS o u r c ePlatform-Based Approach to Test and MeasurementWhat Is PXI?Powered by software, PXI is a rugged PC-based platform for measurement and automation systems. PXI combines PCI electrical-bus features with the modular, Eurocard packaging of CompactPCI and then adds specialized synchronization buses and key software features. PXI is both a high-performance and low-cost deployment platform for applications such as manufacturing test, military and aerospace, machine monitoring, automotive, and industrial test. Developed in 1997 and launched in 1998, PXI is an open industry standard governed by the PXI Systems Alliance (PXISA), a group of more than 70 companies chartered to promote the PXI standard, ensure interoperability, and maintain the PXI specification.Integrating the Latest Commercial TechnologyBy leveraging the latest commercial technology for our products, we can continually deliver high-performance and high-quality products to our users at a competitive price. The latest PCI Express Gen 3 switches deliver higher data throughput, the latest Intel multicore processors facilitate faster and more efficient parallel (multisite) testing, the latest FPGAs from Xilinx help to push signal processing algorithms to the edge to accelerate measurements, and the latest data converters from TI and ADI continuallyincrease the measurement range and performance of our instrumentation.PXI InstrumentationNI offers more than 600 different PXI modules ranging from DC to mmWave. Because PXI is an open industry standard, nearly 1,500 products are available from more than 70 different instrument vendors. With standard processing and control functions designated to a controller, PXI instruments need to contain only the actual instrumentation circuitry, which provides effective performance in a small footprint. Combined with a chassis and controller, PXI systems feature high-throughput data movement using PCI Express bus interfaces and sub-nanosecond synchronization with integrated timing and triggering.OscilloscopesSample at speeds up to 12.5 GS/s with 5 GHz of analog bandwidth, featuring numerous triggering modes and deep onboard memoryDigital InstrumentsPerform characterization and production test of semiconductor devices with timing sets and per channel pin parametric measurement unit (PPMU)Frequency Counters Perform counter timer tasks such as event counting and encoder position, period, pulse, and frequency measurementsPower Supplies & Loads Supply programmable DC power, with some modules including isolated channels, output disconnect functionality, and remote senseSwitches (Matrix & MUX) Feature a variety of relay types and row/column configurations to simplify wiring in automated test systemsGPIB, Serial, & Ethernet Integrate non-PXI instruments into a PXI system through various instrument control interfaces Digital MultimetersPerform voltage (up to 1000 V), current (up to 3A), resistance, inductance, capacitance, and frequency/period measurements, as well as diode testsWaveform Generators Generate standard functions including sine, square, triangle, and ramp as well as user-defined, arbitrary waveformsSource Measure Units Combine high-precision source and measure capability with high channel density, deterministic hardware sequencing, and SourceAdapt transient optimizationFlexRIO Custom Instruments & Processing Provide high-performance I/O and powerful FPGAs for applications that require more than standard instruments can offerVector Signal Transceivers Combine a vector signal generator and vector signal analyzer with FPGA-based, real-time signal processing and controlData Acquisition Modules Provide a mix of analog I/O, digital I/O, counter/timer, and trigger functionality for measuring electricalor physical phenomena©2019 National Instruments. All rights reserved. LabVIEW, National Instruments, NI, NI TestStand, and are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. The contents of this Site could contain technical inaccuracies, typographical errors or out-of-date information. Information may be updated or changed at any time, without notice. Visit /manuals for the latest information. Hardware ServicesAll NI hardware includes a one-year warranty for basic repair coverage, and calibration in adherence to NI specifications prior to shipment. PXI Systems also include basic assembly and a functional test. NI offers additional entitlements to improve uptime and lower maintenance costs with service programs for hardware. Learn more at /services/hardware .Program Duration 3 or 5 years3 or 5 years Length of service programExtended Repair Coverage●●NI restores your device’s functionality and includes firmware updates and factory calibration.SystemConfiguration,Assembly, and Test 1 ● ●NI technicians assemble, install software in, and test your system per your custom configuration prior to shipment.Advanced Replacement 2 ●NI stocks replacement hardware that can be shipped immediately if a repair is needed.System Return MaterialAuthorization (RMA)1 ●NI accepts the delivery of fully assembled systems when performing repair services.Calibration Plan (Optional) Standard Expedited 3NI performs the requested level of calibration at the specified calibration interval for the duration of the service program.1This option is only available for PXI, CompactRIO, and CompactDAQ systems.2This option is not available for all products in all countries. Contact your local NI sales engineer to confirm availability. 3Expedited calibration only includes traceable levels.PremiumPlus Service ProgramNI can customize the offerings listed above, or offer additional entitlements such as on-site calibration, custom sparing, and life-cycle services through a PremiumPlus Service Program. Contact your NI sales representative to learn more.Technical SupportEvery NI system includes a 30-day trial for phone and e-mail support from NI engineers, which can be extended through a Software Service Program (SSP) membership. NI has more than 400 support engineers available around the globe to provide local support in more than 30 languages. Additionally, take advantage of NI’s award winning online resources and communities .。
VIAVI IFR6000 传感器 DME TCAS 飞行线测试设备 DME模式信号生成器说明书
VIAVI Solutions Specification SheetVIAVIIFR6000Transponder/DME/TCAS Flight Line Test SetDME ModeA 5-minute warm-up period is required for all specifications.Output FrequencyReply Frequency Range: 962 to 1213 MHzAccuracy: ±10 kHzOutput LevelAntenna Port Range: -67 to -2 dBm at antenna portResolution: 1 dBAccuracy: ±2 dBDistance to UUT antenna: 6 to 300 ft. withsupplied antennaRF I/O Port Range: -115 to -47 dBmResolution: 1 dBAccuracy: -95 dBm to –47 dBm, ±1 dBAccuracy: -115 dBm to <-95 dBm, ±2 dBReply Pulse SpacingP1 to P212 μs (±100 ns) (X Channel) @ 50% peakP1 to P230 μs (±100 ns) (Y Channel) @ 50% peakReply Pulse WidthP1/P2 3.5 μs (±0.5 μs)Echo ReplyControl On/OffPosition30 nmi (±1 nmi)Amplitude-11 dB (±1 dB) relative to reply levelReply Pulse Rise and Fall Times (all pulses)Rise Time 2.5 μs (±0.25 μs) (10% to 90%)Fall Time 2.5 μs (±0.25 μs) (90% to 10%)Reply DelayX Channel Fixed reply delay: 50 μs (±100 ns)Y Channel Fixed reply delay: 56 μs (±100 ns)Range Delay (X and Y Channel)Range0 to 450.00 nmiResolution0.01 nmiAccuracy±0.01 nmiRange Rate (X and Y Channel)Range10 to 6500 ktsResolution 1 ktsAccuracy±0.01% typical, tested to ±0.5%SquitterPRF2700 HzAccuracy±2%Distribution Per ARINC 568Reply EfficiencyRange0 to 100%Resolution1% incrementsAccuracy±0.5%Ident ToneSelection Selectable three letter codeFrequency1350 HzAccuracy±2 HzInterrogationFrequency1030 MHzAccuracy±10 kHzRF Output LevelAntenna Connector(MTL + 6 dB typical, automaticallycontrolled for a MTL range of -83 to -68dBm)Range-67 to -2 dBm at antenna connectorResolution0.5 dBAccuracy±2 dBDistance to UUTAntenna6 to 200 ft with supplied antennaRF I/O Connector(MTL + 6 dB typical, automaticallycontrolled)Range-115 to -47 dBmResolution0.5 dBAccuracy-95 to –47 dBm, ±1 dBAccuracy-115 to <-95 dBm, ±2 dB ATCRBS/MODE S Interrogation Pulse SpacingMode AP1 to P2 2.00 μs (±25 ns)P1 to P3 8.00 μs (±25 ns)Mode CP1 to P2 2.00 μs (±25 ns)P1 to P3 21.00 μs (±25 ns)Mode SP1 to P2 2.00 μs (±25 ns)P1 to P6 3.50 μs (±25 ns)P1 to SPR 4.75 μs (±25 ns)P5 to SPR0.40 μs (±50 ns)Intermode Interrogation Pulse SpacingMode AP1 to P38.00 μs (±25 ns)P1 to P410.00 μs (±25 ns)Mode CP1 to P321.00 μs (±25 ns)P1 to P423.00 μs (±25 ns)Interrogation Pulse WidthsModes A, C, S, IntermodeP1, P2, P30.80 μs (±50 ns)Mode SP6 (Short DPSKBlock)16.25 μs (±50 ns)P6 (Long DPSKBlock)30.25 μs (±50 ns)P50.80 μs (±50 ns)IntermodeP4 (Short)0.80 μs (±50 ns)P4 (Long) 1.60 μs (±50 ns)Interrogation Pulse Rise and Fall Times (All Modes)Rise Time50 to 100 nsFall Time50 to 200 nsPhase Modulation (All Modes)Transition Time<80 nsPhase Shift180° (±10°)SLS Levels (Automatically controlled in the SLS LEVEL test) ATCRBSSLS Level (P2)-9 dB, -1 to +0 dB relative to P1 level0 dB, -0 to +1 dB relative to P1 levelOFFMode SSLS Level (P5)-12 dB, -1 to +0 dB relative to P6 level+3 dB, -0 to +1 dB relative to P6 levelOFF2 IFR6000 Spec Sheet3 IFR6000 Spec SheetTransponder Mode (continued)Range +45.5 to +59 dBm (35.5 to 800 watts)Resolution 0.1 dB Accuracy ±2 dBDirect Connection Peak Pulse Power (@ 1090 MHz)Range +46.5 to +59 dBm (45 to 800 Watts)Resolution 0.1 dB Accuracy±1 dBTransmitter Frequency Range 1087.000 to 1093.000 MHz Resolution 10 kHz Accuracy ±50 kHzReceiver Sensitivity, Radiated MTLRange -79 to -67 dBm into 0 dBi antenna Resolution 0.1 dB Accuracy ±2 dB, typicalReply Delay ATCRBS Range 1.80 to 7.00 μs Resolution 10 ns Accuracy ±50 nsReply Delay , Mode S and ATCRBS Mode S ALL-CALLRange 125.00 to 131.00 μs Resolution 10 ns Accuracy ±50 nsReply Delay Jitter ATCRBS Range 0.00 to 2.30 μs Resolution 1 ns Accuracy ±20 ns Mode S and ATCRBS Mode S ALL-CALLRange 0.00 to 6.00 μs Resolution 1 ns Accuracy ±20 ns Pulse Spacing F1 to F2Range 19.70 to 21.60 μs Resolution 1 ns Accuracy±20 ns Mode S Preamble Range, P1 to P20.8 to 1.2 μs Range, P1 to P3 3.3 to 3.7 μs Range, P1 to P4 4.3 to 4.7 μs Resolution 1 ns Accuracy ±20 nsPulse Widths F1 to F2Range 0.25 to 0.75 μs Resolution 1 ns Accuracy ±20 ns Mode S Preamble Range 0.25 to 0.75 μs Resolution 1 ns Accuracy ±20 ns PULSE Amplitude VariationRangeMode S (Relative to P1)-3 to +3 dB ATCRBS (Relative to F1)-3 to +3 dB Resolution 0.1 dB (0.01 dB via RCI)Accuracy±0.5 dB DF 11 Squitter Period Range 0.10 to 4.88 sec Resolution 10 ms Accuracy ±10 msDiversity Isolation Range 0 to >20 dB (Depending on T est Distance)T est Distance 1.83 m (6ft) to 28.96 m (95 ft)Resolution 0.1 dB Accuracy±3 dBOutput Frequency Reply Frequency 1090 MHz Accuracy±10 kHzOutput Level (simulated ERP)Antenna Connector 1Radiated power at 0 dBi UUT antenna -68 dBm typical @ 10 Nmi(Range, automatically controlled)Range -67 to -2 dBm at Antenna connector Resolution 0.5 dB Accuracy ±2 dBDistance to UUT antenna6 to 300 ft. with supplied antenna 1 - Simulates a 50.5 dBm XPDR ERP at 10 nMi rangeTCAS Mode (continued)RF I/O ConnectorAutomatic Mode-68 dBm @ 10 Nmi (range automaticallycontrolled)Manual Mode Range-115 to -47 dBmResolution0.5 dBAccuracy-95 to –47 dBm, ±1 dBAccuracy-115 to <-95 dBm, ±2 dBReply Pulse SpacingMode CF1 to F220.30 μs (±25 ns)F1 to C1 1.45 μs (±25 ns)F1 to A1 2.90 μs (±25 ns)F1 to C2 4.35 μs (±25 ns)F1 to A2 5.80 μs (±25 ns)F1 to C47.25 μs (±25 ns)F1 to A48.70 μs (±25 ns)F1 to B111.60 μs (±25 ns)F1 to D113.05 μs (±25 ns)F1 to B214.50 μs (±25 ns)F1 to D215.95 μs (±25 ns)F1 to B417.40 μs (±25 ns)F1 to D418.85 μs (±25 ns)Mode SP1 to P2 1.00 μs (±25 ns)P1 to P3 3.50 μs (±25 ns)P1 to P4 4.50 μs (±25 ns)P1 to D18.00 μs (±25 ns)D1 to Dn (n=2 to 112) 1.00 μs times (n-1) (±25 ns)Reply Pulse WidthsMode CAll pulses0.45 μs (±50 ns)Mode SP1 through P40.50 μs (±50 ns)D1 through D1120.50 μs (±50 ns), 1 μs chip widthReply Modes TCAS I / II Mode C (with altitude reporting)TCAS II Mode S formats 0, 11, 16Reply Pulse AmplitudesATCRBS±1 dB relative to F1Mode S±1 dB relative to P1Reply Pulse Rise and Fall Times (All Modes)Rise Time50 to 100 nsFall Time50 to 200 nsPercent ReplyRange0 to 100%Resolution10%Accuracy±1%Reply DelayATCRBS 3.0 μs (±50 ns)Mode S128 μs (±50 ns)Range DelayRange0 to 260 nmiResolution0.1 nmiAccuracy±0.02 nmiRange RateRange-1200 to +1200 ktsResolution10 ktsAccuracy10%Altitude RangeRange-1000 to 126,000 ft.Resolution, Mode C100 ft.Resolution, Mode S25 ft.Altitude RateRange-10,000 to +10,000 fpmResolution100 fpmAccuracy10%SquitterControl On/OffRate0.8 to 1.2 seconds, randomly distributed ReceiverPulse Spacing (ATCRBS, Mode C All Call)S1 to P1 2.0 μsAccepts< ±200 nsRejects> ±1.0 μsP1 to P321.0 μsAccepts< ±200 nsRejects(<10% Replies) >±1.0 μsP1 to P423.0 μsAccepts< ±200 nsRejects(<10% Replies) > ±1.0 μsMode SP1 to P2 2.0 μsAccepts<±200 nsRejects(<10% Replies) >±1.0 μsP1 to SPR 4.75 μsAccepts<±200 nsRejects(<10% Replies) >±1.5 μs SuppressionATCRBS (P2 or S1)>0.5 dB above levelof P1<10% Replies4 IFR6000 Spec SheetTransmit Frequency978 MHzAccuracy±10 kHzOutput LevelAntenna PortRadiated power at0 dbi UUT antenna-85 dBm, automatically controlled Range-67 to -2 dBm at antenna portResolution0.5 dBAccuracy±2 dBDistance to UUTantenna6 to 150 ft. with supplied antenna RF I/O PortAutomatic mode-85 dBmAccuracy±1 dBModulationType BPFSK per RTCA DO-282BDeviation±312.5kHz typicalRange+35 to +57 dBm (3.16 to 500 watts) Resolution0.1 dBAccuracy±2 dBDirect Connection Power (@978 MHZ)Range+35 to +57 dBm (3.16 to 500 watts) Resolution0.1 dBAccuracy±1 dBFrequencyRange977.96 to 978.04MHz Resolution 1 kHzAccuracy±10 kHzMisc. Inputs/OutputsRF I/OType Input/OutputImpedance50 Ω typicalMaximum Input Level 4 kW peak, 10 W average VSWR<1.3:1AntennaType Input/OutputImpedance50 Ω typicalMaximum Input Level10 W peak, 0.5 W average VSWR< 1.7:1VideoType OutputImpedance50 Ω typicalGenerate Video Level0.2 to 1.5 V peak to peak into 50 ΩReceive Video Level Proportional to IF level Baseline±0.5 V referenced to ground GPS AntennaType InputImpedance50 Ω typical, DC shortTest AntennaVSWR<1.5:1Gain7.5 dB, TypicalTime Base (TCXO)T emperature Stability±1 ppmAging±1 ppm per yearAccuracy±1 ppmBatteryType Li IonDuration>4 hrs continuous operation>6 hrs, Typical5 IFR6000 Spec Sheet© 2020 VIAVI Solutions Inc.Product specifications and descriptions in this document are subject to change without notice.IFR6000-ss-avi-nse-ae 30186488 901 0220Contact Us+1 316 522 4981***********************************To reach the VIAVI office nearest you, visit /contact.VIAVI SolutionsMisc. Inputs/Outputs (continued)Input Power (Test Set)Input Range 11 to 32 VdcPower Consumption55 W Maximum16 W Nominal at 18 Vdc with charged batteryFuse Requirements 5 A, 32 Vdc, Type FInput Power (Supplied External AC to DC Converter)Input Range 100 to 250 VAC, 1.5 A Max, 47 to 63 Hz Mains SupplyVoltage Fluctuations <10% of the nominal voltage Transient Over-voltagesAccording to Installation, Category IIEnvironmentalTest Set Use Pollution Degree 2Altitude<4800 metersOperating T emp.2-20°C to 55°C (-4° to 131°F)Storage T emp.3-30°C to 71°C (-22° to 159.8°F)Relative Humidity95% (±5%) from 5° to 30°C (41° to 86°F)75% (±5%) from 30° to 40°C (86° to 104°F)45% (±5%) from 40° to 55°C (104° to 131°F)Supplied External AC to DC Converter Use Indoors Altitude <10,000 metersOperating T emperature 0° to 40°C (32° to 104°F)Storage T emperature-20°C to 71°C (-4° to 159.8°F)Physical CharacteristicsDimensions Height 11.2 in. (28.5 cm)Width 9.1 in. (23.1 cm)Depth2.7 in. (6.9 cm)Weight (Test set only)8 lbs. (3.6 kg)CertificationsTest SetAltitude, operating MIL-PRF-28800F , Class 2Altitude, not operating MIL-PRF-28800F , Class 2Bench Handling MIL-PRF-28800F , Class 2Blowing Dust MIL-STD-810F , Method 510.4, Procedure 1Drip-proofMIL-PRF-28800F , Class 2Explosive Atmosphere MIL-STD-810F Method 511.4, Procedure 1Safety Compliance UL-61010B-1, EN 61010-1,CSA 22.2 No 61010-1EMCEN 61326Relative Humidity MIL-PRF-28800F , Class 2Shock, Functional MIL-PRF-28800F , Class 2Vibration Limits MIL-PRF-28800F , Class 2T emp, operating 4MIL-PRF-28800F , Class 2T emp, not operating 5MIL-PRF-28800F , Class 2Transit DropMIL-PRF-28800F , Class 2External AC-DC Converter Safety Compliance UL 1950 DS, CSA 22.2 No. 234,VDE EN 60 950EMI/RFI ComplianceFCC Docket 20780 Curve “B”EMC EN 61326Transit Case Drop T estFED-STD-101C, Method 5007.1Paragraph 6.3, Procedure A, Level A Falling Dart Impact ATA 300, Category I Vibration, Loose Cargo FED-STD-101C, Method 5019Vibration, Sweep ATA 300, Category ISimulated Rainfall MIL-STD-810F , Method 506.4Procedure II of 4.1.2FED-STD-101C Method 5009.1, Sec 6.7.1ImmersionMIL-STD-810F , Method 512.42 - Battery charging temperature range: 5°C to 40°C (41°F to 104°F) (controlled by internal charger)3 - Li Ion Battery must be removed below -20°C (-4°F) and above 60°C (140°F)4 - Temperature range extended to -20°C to 55°C (-4° to 131°F)5 - Temperature range reduced to -30°C to 71°C (-22° to 159.8°F)。
JBL MRX525 音频系统说明书
JBL Incorporated, 8500 Balboa Boulevard, P .O.Box 2200, Northridge, California 91329 U.S.A.J B L M R X 525 R E V HPACKAGE WIRING DIAGRAM03-12T echnical ManualJBL MRX525SPECIFICATIONSACOUSTIC & ELECTRICAL SPECIFICATIONS:•Nominal Impedance: 4 Ohms •Power Capacity:800W / 1600W / 3200W, 2 hrs.(Cont/ Prog/Peak):700W / 1400W / 2800W, 100 hrs • Frequency Range:40 Hz - 20 kHz (-10 dB)•Frequency Response:57 Hz – 20 kHz (±3 dB) •Maximum SPL:129 dB SPL continuous (135 dB SPL peak)•System Sensitivity:100 dB SPL (1 watt @ 1 meter)•Crossover Frequency:1.8 kHzSYSTEM COMPONENTS:•Cabinet:Enclosure (Not for Sale)•Grille:362524-001•Low Frequency 265H-1, 380 mm (15 in) Differential Transducer:Drive woofer •DC Resistance: 5.0 ohm ±10%•High Frequency 2408H, 37.5 mm (1.5 in) annularTransducer:polymer diaphragm, neodymium compression driver•DC Resistance:4.8 ohm +/- 0.2 ohmSYSTEM COMPONENTS:(CONT’D) • Crossover Network:364969-001AURAL SWEEP TEST SPECIFICATIONS:A.System Aural Sweep T est:7.0V Input, 50 Hz to 20 kHzB.L.F .Aural Sweep Test:7.0V Input, 10 Hz to 300 HzC.H.F .Aural Sweep Test:0.75V Input, 200 Hz to 1.5 kHz PHYSICAL SPECIFICATIONS:•Enclosure Dimensions:1240 x 535 x 460 mm D (H x W x D)(48.75 x 21.0 x 18.0 in D)•Net Weight (ea):84.0 lb (38.2 kg)WARRANTY INFORMATION:•Refer to Warranty Statement packed with each product.Warranty 59660Manual362053-001Carton362293-001Fillers (2)362294-002Pkg, Microfoam (8) 49790PPop Sticker 362896-001NETWORK SCHEMATIC - (364969-001)Driver, High Freq 2408H(361549-001X) Driver Repl D8R2408Driver,Low Freq (2)265H(362048-001X)Cone Repl C8R265 265H-1 (2)(363837-003X)Cone Repl C8R265-1Network Assembly 364969-001YEL YEL/BLKGRN GRN/BLKWH/BLK WH NOTE:INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.A COMPLETE REPLACEMENT ASSEMBL Y SHOULD BE ORDERED.JBL MRX525804-11110-1610-32 x 1, FLT, PH,BLK OXIDE, LCSNetwork, Input364969-001Screw (6)882-41110-106 x 5/8, PAN, PH,BLK ZINC, LCSNameplate 362051-001Grille Assembly w/ Screen362524-001 Screw (26)882-51110-12Foot (4)353445-001Screw (4)884-41110-1210 x 3/4, PAN, PH,PB, BLK ZINC, LCSDriver, Low Freq (2)265H(362048-001X)Cone ReplC8R265265H-1(363837-003X)Cone ReplC8R265-1Network, Input362292-001Screw (2)882-41110-106 x 5/8, PAN, PH,BLK ZINC, LCS。
纳达场域人手：全功能电磁场仪说明书
DatasheetNarda FieldManNarda FieldMan ®All-in-one electromagnetic field meter ranging from 0 Hz to 90 GHzThe Narda FieldMan performs highly accurate measure-ments of non-ionizing high-frequency radiation and low-frequency fields. Equipped with digital probes for measuring electric or magnetic field strengths, it covers the range from static and low-frequency fields in medical and industrial applications to mobile radio frequencies and millimeter waves. Flat frequency response probes (“flat probes”), as well as so-called shaped probes that evaluate the field strength on the basis of a human safety standard are available. Probes with built-in FFT analysis enable spectral measurements along with time domain analyses up to frequencies of 400 kHz. All probes have a digital interface that transmits the measurement data to the basic device in a fail-safe manner. This eliminates the need to calibrate the basic unit.›Non-directional measurement using isotropic probes for applications in the frequency range 0 Hz (DC) to 90 GHz›Large sunlight readable color display 5” diagonal with 1280x720 HD resolution›Digital probe interface for broadband and selective probes – no more meter calibration›Powerful time and frequency domain analysis for low frequency fields up to 400 kHz including Weighted Peak measurements›WiFi/Bluetooth interface for remote operation via smartphone app (Option)›Built-in GPS receiver and rangefinder for easy location determination (Option)›Fast data transmission ›optical interface ›Ethernet ›USB-CApplicationsThe Narda FieldMan is used to make precision measurements to establish human safety, particularly in workplace environments where high electric or magnetic field strengths are likely to occur. An essential task is to demonstrate compliance with generalsafety regulations, such as FCC, IEEE, ICNIRP or EMF Directive 2013/35/EU. Examples of measurement environments are:›Radiocommunication base stations (e.g. IEC / EN 62232)›Broadcasting systems (e.g. IEC 62577)›Radar and satellite communications systems ›Induction heating and melting (e.g. EN 50519)›Household appliances (e.g. IEC / EN 62233)›Electric welding equipment (e.g. IEC / EN 62822)›Railroad operations (e.g. EN 50500)›Automotive operations (e.g. IEC 62764)›Energy supply systems (e.g. IEC / EN 62110)›Electrical medical devices (e.g. IEC / EN 60601)›TEM cells and absorber chambers to demonstrate electromagnetic compatibility (EMC)Digital ProbesA large number of isotropic field probes are available for theFieldMan. All of them transmit their information and measurement data as a digital signal to the FieldMan, either via an electrical USB interface or via an optical COM interface. In this way,interference is significantly reduced compared to high-resistance analog interfaces. The specially developed screw connectors and electrical contacts are extremely robust and resilient.The probes are automatically recognized after connection to the FieldMan. Sensors inside the probe record the temperature of the measuring location and transmit it to the FieldMan display. In addition to the automatic offset correction, the temperature measurement is also used to compensate for the typicaltemperature dependency of the sensor diodes. The advantages are uninterrupted measurements without zero adjustment and higher measurement accuracy over wide temperature ranges. An automatic self-test function can even detect possible errors in the sensor system, which means that additional checking with a test generator is superfluous. Only the digital probes arecalibrated. You can continue to use your FieldMan during this time.There are probes for many different applications with theappropriate frequency and level ranges. The following table gives an overview of common areas of application.Frequency rangeDC up to1 kHzUp to400 kHzUp to400 kHz Up to 30 MHz Up to 1 GHz Up to 6 GHz Up to 40 GHz Up to 90 GHz Up to 50 GHz Field type, magnetic (H) or electric (E)H E+HHHHEEEE ShapedProbe modelsHP-01EHP-50F/G BFD-400-1 (100 cm 2) BFD-400-3 (3 cm 2) HFD-3061 HFD-0191 EFD-0391 EFD-0392 EFD-0691 EFD-0692 EFD-1891 EFD-4091 EFD-5091 EFD-6091EFD-9091EAD-5091EBD-5091ECD-5091EDD-50915G mobile radio / telecommunications Broadcast radio / TVSatellite communications RadarIndustry: Heating and temperingIndustry: Plastics weldingIndustry: Semiconductor productionMedicine: Diathermy, hyperthermyLeak locationHousehold appliances Electric welding equipmentRailroad operationsAutomotive operationsEnergy supply systems Electric medical devicesAccredited calibration includedProbe interfaceOptical connectionDigital probe interfaceFig. 1. Areas of application and suitable probe modelsUse and benefitDuring the development of the FieldMan, special attention was paid to achieving simple, well-structured and fluid operation. The arrangement of many display elements known from smartphones, the self-explanatory symbols and the FieldMan processes, which are perfectly tailored to the measurement tasks, offer maximum ease of use. The large, anti-glare HD color display shows the measured values numerically and graphically with all important additional information in a clear form and is easy to read even in bright sunlight. From simple broadband measurements to sophisticated time signal recording in real time or spectral frequency analysis of low-frequency fields, you have the right operating modes at your disposal.Measurement results can be commented on by text or voice and can be saved as a screen copy at the push of a button. Built-in sensors record the current environmental conditions as well as the position data and automatically add them to the measurement result. The built-in distance meter (option) shows you the measuring height above the ground, which makes the exact positioning of the measuring device much easier. For a better overview, the measurement results can be assigned to freely definable projects, which is particularly helpful when the measurement locations change frequently. If you want todocument your measurement results with photos and videos, the FieldMan smartphone app will help you. For example, the app wirelessly transfers media files created with the smartphone to the project directory on the FieldMan SD memory card. A newly developed, extremely powerful PC software "Narda-TSX" is available for documenting the measurement results, media and other information. It is Narda's new software platform for device configuration, measurement data evaluation and documentation, which in addition to the FieldMan will also support other Narda products in the future.Fig. 2. FieldMan display and controlsFig. 3. The FieldMan is supplied with a robust transport caseProbe connectionBrightness sensor LoudspeakerMicrophone, humidity sensor Status bar Probe information Measurement informationMeasurement isotropic Measurement single axes Statistical values Interface panelMeasurement graphic: Time curve, spectrum or bar graph Softkey symbolsSoftkeys Save key Back key Navigation keyStatus LEDDefinitions and ConditionsConditionsUnless otherwise noted, specifications apply after 30 minutes warm-up time within the specified environmental conditions. The product is within the recommended calibration cycle.Specifications with limitsThese describe product performance for the given parameter covered by warranty. Specifications with limits (shown as <, ≤, >, ≥, ±, max., min.) apply under the given conditions for the product and are tested during production, considering measurement uncertainty.Specifications without limitsThese describe product performance for the given parameter covered by warranty. Specifications without limits represent values with negligible deviations, which are ensured by design (e.g. dimensions or resolution of a setting parameter). Typical values (typ.)These characterize product performance for the given parameter that is not covered by warranty. When stated as a range or as a limit (shown as <, ≤, >, ≥, ±, max., min.), they represent the performance met by approximately 80% of the instruments. Otherwise, they represent the mean value. The measurement uncertainty is not taken into account. Nominal values (nom.)These characterize expected product performance for the given parameter that is not covered by warranty. Nominal values are verified during product development but are not tested during production. UncertaintiesThese characterize the dispersion of the values attributed to the measurands with an estimated confidence level of approximately 95%. Uncertainty is stated as the standard uncertainty multiplied by the coverage factor k=2 based on the normal distribution. The evaluation has been carried out in accordance with the rules of the “Guide to the Expression of Uncertainty in Measurement” (GUM).Specifications MetricsElectric and magnetic fieldsMeasurement control and result display for the following probes and analyzers.Frequency range and level range depending on the probe/ analyzer. Broadband probes 100 kHz to 90 GHz (see list of digital broadband probes)Selective probes 1 Hz to 400 kHz, B-field (see list of digital selective probes)Probe model EHP-50F/G 1 Hz to 400 kHz, E-field and B-field (FFT-Analyzer, see separate datasheet)Probe model HP-01 0 Hz to 1 kHz, B-field (Magnetometer/ FFT-Analyzer, see separate datasheet)Electric field units V/m, mW/cm2, W/m2, % of standard (depending on the connected probe)Magnetic field units A/m, Tesla, Gauss, mW/cm2, W/m2, % of standard (depending on the connected probe)Temperature 1Logging of the ambient temperature at the time of measurement (-40 °C to +85 °C) in °C or °F Humidity 1Logging of the ambient relative humidity at the time of measurement (0% to 100% RH)Air pressure Logging of the ambient air pressure at the time of measurement (300 to 1100 hPa)Distance (Option) An ultrasonic rangefinder on the bottom side measures the distance to ground or to an object (0.25 m to 4 m) in m, ft, in or yd. Coverage ratio ≈ Distance / 4.Geolocation (Option) Built-in GNSS receiver for determining latitude, longitude and altitude (MSL).72 channels with the support of GNSS systems (GPS / QZSS, Galileo, GLONASS, BeiDou) and the SBAS extension system (WAAS, EGNOS, MSAS, GAGAN).Position accuracy: Autonomous 2.5 m CEP.DisplayDisplay type Sunlight readable 5” color TFT-LCD anti-glare display (HD 1280 x 720 pixels) Brightness Manual control or automatic control via brightness sensorOperating languages Largely language-independent measurement control via symbols.Menu languages: English, German, more are planned.1 The permissible operating range of the device and probe must not be exceeded. The temperature sensor is located in the probe.Operating ModesMode description Field Strength Broadband field measurements. Numerical results with time curve or bar graph display.Spatial Average Procedure for spatial averaging of broadband measurements over several measurement positions. Timer Logging Time-controlled broadband measurement of the field strength in a definable period.Spectrum FFT analysis with spectrum display, marker evaluation and display of the broadband level. Shaped Time Domain Time domain assessment (WPM, WRM) with digital filtering related to a selected safety limit. Scope Triggered measurement of the field curve over time with pretrigger feature.Available modes Broadband ProbesDigital Interface100 kHz to 90 GHzSelective ProbesDigital Interface1 Hz to 400 kHzModel EHP-50F/GOptical Interface1 Hz to 400 kHzModel HP-01Optical InterfaceDC to 1 kHzField Strength ☑☑☑☑Spatial Average ☑☑☑☑Timer Logging ☑☑☑☑Spectrum ☑☑☑Shaped Time Domain ☑☑Scope ☑FeaturesProbe features Recognition Probes are automatically recognized after being plugged in.Operating principle Measurement signals are sampled and processed inside the probe and provided as digital values. Offset compensation Automatic offset compensation enables gapless RF measurements without zero adjustment.Self-test Functional test including the sensor function of each measuring axis for digital interface probes.Signal detection RMS detection, Peak detection for WPM measurementsand selectable detection RMS/Peak with BDF-400 probes.Numerical display Total field (isotropic) and field components X, Y, Z (for probes up to 18 GHz).Result types Field Strength Actual, Max, Min, Avg (average) and Max Avg Spectrum Actual or Max or AvgShaped Time Domain Actual, Max and MinScope Actual, Max and marker for dB/dtAverage mode Moving average over time of the square values of the field strength.Averaging time Field Strength,Timer Logging 1 s, 3 s, 10 s, 30 s, 1 min, 3 min, 6 min, 10 min, 30 min, 1 h, 6 h, or 24 h Spectrum 4, 8, 16, 32 or 64 number of averagesGraphical display with marker function Field Strength Actual and Avg trace vs. time, time span selectable from 48 s to 24 hours.Spatial Average Bar graph of results for each measurement position (≤100) and the spatial average line. Timer Logging Timeline during measurement, results as a graph vs. time after measurement.Spectrum Frequency spectrum and selectable limit line. All axes are measured, one can be displayed. Shaped Time Domain Exposure index (WPM or WRM) in % vs. time, time span selectable from 4 min to 24 h. Scope Sign-based recorded signal with 25 % pretrigger. Recording time selectable from 1 ms to 30 s.Screenshots Manually initiated screenshot or automatically when saving a measurement result.Comments Voice and/or text comments can be assigned to a measurement result.Alarm Alarm sound and alarm message when an adjustable field strength is exceeded.Audible field indicator Acoustic hotspot search with field strength-dependent audio frequency (available for RF-probes).Scheduled measurements Mode Timer Logging with automatic wake-up and shutdown after measurement. Start time pre-selection: up to 24 h or immediate startTimer duration: up to 100 hStorage interval: 1s to 6 min (in 11 steps, up to 32000 intervals)Correction factors Post-processing for broadband probes to increase the accuracy at a known field frequency(direct frequency entry, interpolation between calibration points)Probe interface Digital probe interface for direct connection or via the optional extension cable.Optical port Serial, full duplex, ≥ 1 Mbit/s, to connect the Field Analyzer EHP-50F/G, the Magnetometer HP-01or the Digital Probe Repeater. Recommended interface for PC controlled measurements.USB 2.0 USB-C connection for battery charging, remote control and data transfer.Ethernet Gigabit Ethernet LAN connectivity for remote control and data transfer.Bluetooth (Option) BT 4.0 for remote control via smartphone app (Android).WiFi (Option) WLAN connectivity for remote control and data transfer.AUX MMCX connector, reserved for future use.Result StorageStorage triggers Manual (by keypress) or scheduled (Timer Logging Mode).Storage medium Removable micro SD card for storing measurement data, setups and comments.Storage capacity Up to 128 GB.16 GB micro SD card included.Screenshots Screenshots can be saved for documentation as PNG files.Voice recorder Voice comments can be added to measurement results (recording and playback).Text editor Text comments can be added to measurement results (integrated virtual keyboard).Photos / videos (WiFi/BT Option) Photos and videos from a smartphone can be transferred to the device using the FieldMan app.Printouts (WiFi/BT Option) Saved measurement results can be printed locally by using the FieldMan Android app for on-sitedocumentation (requires a compatible wireless printer).General SpecificationsRecommended calibration interval Calibration of the basic unit is not required. Only the probes are calibrated.Power supply internal Li-Ion rechargeable battery pack, included and replaceable external USB-C PD (maximum 12 V / 3A, compatible with BC1.2 and QC 3.0)Operating time (nom.) 16 hours (with broadband probes and analyzers)Charging time (nom.) 4 hours (80% charged in 2½ h)RF Immunity 200 V/m (100 kHz to 60 GHz); can be below the permissible measuring range of a probe. Operation in static magnetic fields ≤ 30 mT (to avoid high force on the device)Dimensions (H x W x D) 51 mm x 93 mm x 312 mm without probeWeight 695 g (without probe)Country of origin GermanyEnvironmental ConditionsRange of application Suitable for outdoor use and an operating altitude of up to 5000 mOperating temperature -20 °C to +50 °C during normal operation with battery0 °C to 40 °C during the charging process with an external chargerHumidity < 29 g/m³ (< 93 % RH at +30 °C), non-condensingIngress protection IP54 (probe screwed on, protective flap closed, stand folded in)Climatic conditions Storage 1K4 (IEC 60721-3) extended to -30 °C to +70 °C (battery removed)1K3 (IEC 60721-3) extended to -20 °C to +50 °C (battery inserted) Transport 2K3 (IEC 60721-3) extended to -30 °C to +70° COperating 7K2 (IEC 60721-3) extended to -20 °C to +50 °CMechanical conditions Storage 1M3 (IEC 60721-3) Transport 2M3 (IEC 60721-3) Operating 7M3 (IEC 60721-3)EMC European Union Complies with Directive 2014/53/EU, EN 301489-1, EN 301489-17 and EN 61326 -1 Immunity IEC/EN: 61000-4-2, 61000-4-3, 61000-4-4, 61000-4-5, 61000-4-6, 61000-4-8, 61000-4-11 Emissions IEC/EN: 61000-3-2, 61000-3-3, IEC/EN 55011 (CISPR 11) Class BSafety Complies with European Low Voltage Directive 2014/35/EU and IEC/EN 61010-1 Material Complies with European RoHS Directive 2011/65/EU and (EU)2015/863ORDERING INFORMATIONInstrument SetsDescription Part number FieldMan Basic Set-Probes are not included –Includes:›FieldMan Basic Unit›Hard Case for FieldMan and up to 5 Probes ›Power Supply USB-C PD, AU/EU/UK/US Plugs ›Cable, 2x USB-C(M), 3 A, 2 m›Shoulder Strap, 1 m ›Marking Rings for FieldMan Probes›Quick Start Guide›Safety Instructions›USB Stick: Manuals and Documents›Software Narda-TSX (free download)2460/101Digital Broadband ProbesDescription Part number Probe HFD-3061, H-Field, 300 kHz–30 MHz 2462/05 Probe HFD-0191, H-Field, 27 MHz–1 GHz 2462/06 Probe EFD-0391, E-Field, 100 kHz–3 GHz 2462/01 Probe EFD-0392, E-Field, High Power, 100 kHz–3 GHz 2462/12 Probe EFD-0691, E-Field, 100 kHz–6 GHz 2462/14 Probe EFD-0692, E-Field, 600 MHz–6 GHz 2462/20 Probe EFD-1891, E-Field, up to 18 GHz2462/02 Probe EFD-4091, E-Field, up to 40 GHz 2462/19 Probe EFD-5091, E-Field, 300 MHz–50 GHz, Thermocouple2462/03 Probe EFD-6091, E-Field, 100 MHz–60 GHz2462/17 Probe EFD-9091, E-Field, 100 MHz–90 GHz2462/18 Probe EAD-5091, FCC 1997 Controlled, Shaped, 300 kHz–50 GHz, E-Field 2462/07 Probe EBD-5091, IEEE 2019 Restricted, Shaped, 3 MHz–50 GHz, E-Field 2462/21 Probe ECD-5091, SC 6 2015 Controlled, Shaped, 300 kHz–50 GHz, E-Field 2462/16 Probe EDD-5091, ICNIRP 2020 Occ, Shaped, 300 kHz–50 GHz, E-Field 2462/22 Note: Separate data sheets are available for the probesDigital Selective ProbesDescription Part number Probe BFD-400-1, B-Field, 100 cm2, 1 Hz–400 kHz, selective 2463/01 Probe BFD-400-3, B-Field, 3 cm2, 1 Hz–400 kHz, selective2463/02 Note: Separate data sheets are available for the probesField AnalyzersDescription Part number EHP-50F E&H Field Analyzer Set, 1 Hz–400 kHz (no Transport Case included) 2404/105 EHP-50F E&H Field Analyzer Set, 1 Hz–400 kHz, Stand-alone/PC use 2404/104 HP-01 Magnetometer Set DC–1 kHz 2405/101OptionsDescription Part number Option, Narda-TSX Live Measurements, for FieldMan Digital Probes (expected from Q3 2023) 2460/95.01 Option, GPS/ Range Finder for FieldMan 2460/95.11 Option, WiFi/ Bluetooth for FieldMan (expected from Q4 2023) 2460/95.12AccessoriesDescription Part number Digital Broadband Probe Repeater 2464/01 Test-Generator 27 MHz 2244/90.38 Tripod, Non-Conductive, 1.65 m, with Carrying Bag 2244/90.31 Tripod, Benchtop, 0.16 m, Non-Conductive 2244/90.32 Tripod Extension, 0.50 m, Non-Conductive (for 2244/90.31) 2244/90.45 Handle, Non-Conductive, 0.42 m 2250/92.02 Car Charger Adapter, USB-C PD 2259/92.28 Cable, Digital Probe Extension, 2 m 2460/90.02 Cable, Digital Probe to USB 2.0 (Type A), 3 m 2460/90.03 Cable, FO Duplex (1000 µm) RP-02, 2 m 2260/91.02 Cable, FO Duplex (1000 µm) RP-02, 5 m 2260/91.09 Cable, FO Duplex (1000 µm) RP-02, 10 m 2260/91.07 Cable, FO Duplex (1000 µm) RP-02, 20 m 2260/91.03 Cable, FO Duplex (1000 µm) RP-02, 50 m 2260/91.04 Cable, FO Duplex, F-SMA to RP-02, 0.3 m 2260/91.01 O/E Converter RS232, RP-02/DB9 2260/90.06 O/E Converter USB, RP-02/USB 2260/90.07 Cable, Adapter USB 2.0 - RS232, 0.8 m 2260/90.53Narda Safety Test Solutions GmbH Sandwiesenstrasse 772793 Pfullingen, GermanyPhone +49 7121 97 32 0****************** Narda Safety Test SolutionsNorth America Representative Office435 Moreland RoadHauppauge, NY11788, USAPhone +1 631 231 1700******************Narda Safety Test Solutions S.r.l.Via Benessea 29/B17035 Cisano sul Neva, ItalyPhone +39 0182 58641****************************Narda Safety Test Solutions GmbHBeijing Representative OfficeXiyuan Hotel, No. 1 Sanlihe Road, Haidian100044 Beijing, ChinaPhone +86 10 6830 5870********************® Names and Logo are registered trademarks of Narda Safety Test Solutions GmbH - Trade names are trademarks of the owners.。
LTE典型信令过程
NAS:PDN connectivity request
Authentication and NAS security procedure
S6a: Update Location request
S11: Modify bearer response S1AP: Path Switch Response
X2AP: UE Context Release
Flush DL Buffer
Data Forwarding End Marker
Switch DL Path
S1 Handover
➢This type of handover takes place when there is no X2 connectivity between source eNB and target eNB.
S10: Forward SRNS Context Notification
UE Detach from old cell and sync to new cell
S10: Forward SRNS Context Ack
S1AP: MME Status Transfer
RRC: Connection Reconfiguration Complete
➢The release of resources at the source side is directly triggered from the target eNB.
UE
S-eNB
RRC: Measurement Control
500 Series 高级压缩器 限制器说明书
500 Series Compressor/Limiter with Dynamic Presence ControlCOMPRESSOR LIMITER 522##Compact 500 Series premium compressor/limiter with dynamic presence control##Fully variable dynamic presence feature preserves high mid-range frequencies for a more natural sound during compression##Dynamic presence control adds “air” to vocals without introducing noise or pumping effectsand reduces the risk of feedback during live performances##Manual envelope controls with linear peak-sensing compression or easy to use Auto mode with RMS compression##Soft or hard knee compressor response with selection switch ##Sidechain high pass filter with selection switch eliminates undesirable low frequency compression artefacts##High performance electronically balanced input stage with high common-mode rejection##Discrete transistor driventransformer balanced output stage ##Precision gain reduction and signal level metering##True hardware bypass selection switch removes all circuitry from the signal path when compression is not requiredThe COMPRESSOR LIMITER 522 brings state of the industry dynamics control to a compact 500 Series format processor that is good enough to wear the MIDAS name. When used in conjunction with the LEGEND L10, L6, or other standard 500 Series rackmount chassis, the 522 provides the ideal solution for users seeking the legendary MIDAS sound in a modular format that boasts upgraded,premium-quality performance. Additionally, the 522’s dynamic Presence control enables operators to add “air” to vocals without the unwanted noise or pumping effects found in competing products – and reduces the risk of feedback occurrence during live performance.Importance of DynamicsDynamics play a major role in music; they help to convey emotion, whether it’s a sultry blues guitar solo, a vocalist belting out his/her message – or the punchy impact of a bass guitar or kick drum. Those dynamics are the essence of a natural sounding performance; it is what makes music interesting. But out of control dynamics can instantly mar an otherwise perfect performance. That is where compression comes to the rescue – softening loud sounds and boosting low signal levels that can often get lost in the mix. The resulting compressed signal creates a much more dense, impactful sound with richness and room for subtle nuances to come through.500 Series Compressor/Limiter with Dynamic Presence ControlCOMPRESSOR LIMITER 522##Power up mute relays prevent switch on thumps##Premium quality components throughout for a crystal-clear audiophile signal path ##10-Year Warranty Program*##Designed and engineered in the U.K.Manual or Auto ModesWhen operating in its default mode (Auto switch not engaged) the 522 functions as a peak-sensing compressor, providing tight peak control via instantaneous changes in gain reduction, which produces more obvious compression. This allows the operator to manually adjust the compressor attack and release times so that the compressor operates in peak mode with linear attack curves. When the Auto switch is engaged, the manual attack and release controls are bypassed and the compressor operates in RMS mode, automatically adjusting the attack and release based on the averaged input signal andthe threshold/ratio settings. This produces a smooth, more relaxed compression that is perceived as more musical and natural sounding.Variable Dynamics & “Air ”The range of mid-high audio frequencies (centered around 5 kH z) can be boosted to increase the sense of presence of vocals and solo instruments. As 522’s Presence control is adjusted above minimum, those mid-high frequencies are increasingly boosted during compression, allowing a sound or instrument to cut through or seem more present in the mix. This variable presence function enables the 522 to effectively operate with two different ratios, one for low frequencies (LF) and the other for mid-high frequencies (reduced ratio). The primary effects are: heavy compression and dynamic control can be applied withoutsounding unnatural; and the reduced compression in the human ear’s most sensitive range makes the material sound brighter. However, since high frequency (HF) make up gain is not required, unwanted noise, pumping, and howl-round during quiet passages are all greatly reduced.500 Series Compressor/Limiter withDynamic Presence ControlCOMPRESSORLIMITER 522Soft or Hard KneeAnother element that affects how natural the output sounds when compressed is how the signalis addressed at and around the knee, or threshold point. By default the 522 is set to Soft kneecompression (switch out), which tends to sound more natural as it blurs the distinction betweenover and under threshold signals, leaving signals below threshold unaffected, while signals just overthreshold get compressed at greatly reduced ratios. Only at the point where the signal level risessignificantly above the threshold is full-ratio compression applied. This performance is similar to thatof many vintage compressors due to non-linearities in gain reduction. When the Hard knee switchis activated, the 522 operates in a more surgical fashion with a more sharply defined transitionbetween under and over threshold, making it ideal for limiting style compression. In this mode asmall amount of Soft knee is retained to keep the sound reasonably natural.Sidechain HPFCOMPRESSOR LIMITER 522’s Sidechain high pass filter (HPF) switch lets you insert a 200 Hz HPF intothe compressor side chain, which keeps LF signals from dominating overall signal compression –and effectively eliminates the unwanted artefacts and pumping effects on higher frequencies.High Performance Balanced Input StageDecades of experience, paired with the premium-grade components that make up every input stagewe build, ensures the ultimate in signal integrity that is the very foundation of our design process.That warm and organic MIDAS sound has been heard by millions of concert goers – and recordedfor posterity on countless live albums. The input stage of the 522 is second to none with its low noiseperformance, which boasts an enviable Common Mode Rejection Ratio (CMRR) of -70 dB @ 1 kHz.500 Series Compressor/Limiter withDynamic Presence ControlCOMPRESSOR LIMITER 522Transistor Driven Transformer Balanced OutputThe output stage of any audio processor is the most critical when it comes to maintaining signal integrity, so the 522 utilises discrete bipolar transistors for both their low distortion and noise characteristics. To finalise the balanced output, a premium quality transformer is employed in order to minimize distortion and maximize clean headroom. 522’s transformer also provides galvanic isolation and generates a more vintage sound, and becomes saturated at lower frequencies to add colour when driven hard.Precision MeteringThe COMPRESSOR LIMITER 522 provides at-a-glance metering with LED stacks that display Gain Reduction and Level independently of each other. The 6 segment Level meter reads from -30 dBu to +20 dBu in 10 dB steps, while the 10 segment Gain Reduction meter reads from -2 dB to -20 dB in 2 dB steps.True Hardware Bypass & Power Up MuteFor those occasions when compression is not needed, 522’s IN switch can be disengaged to remove all circuitry from the signal path via true hardware relay bypass. Additionally, true bypass mode engages should the chassis become accidentally powered down.500 Series Compressor/Limiter with Dynamic Presence ControlCOMPRESSOR LIMITER 522You Are CoveredWe always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Tribe factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous Warranty program .500 Series Compressor/Limiter with Dynamic Presence ControlCOMPRESSOR LIMITER 522Dimensions155,80[6.1339]146,80[5.7795]3,00[0.1181]37,90[1.4921]132,08[5.2000]500 Series Compressor/Limiter with Dynamic Presence ControlCOMPRESSOR LIMITER 522Technical SpecificationsControlsThreshold -50 dBu to +25 dBu knob Ratio 1:1 to ∞ knob Attack 0.1 ms to 20 ms knob Release 50 ms to 2 seconds knob Presence Minimum to maximum knob Makeup gain0 dB to +18 dB knobHard knee/soft knee S witch Sidechain high pass filter S witch Automatic attack and release S witch Compressor in S witchInput and OutputInput Mono, balanced line OutputMono, balanced via transformerSystemNoise at unity gain -95 dBu (22 Hz - 22 kHz)CMRR, unity gain, 1 kHz -70 dB (typical)Input impedance, 1 kHz 20 kΩFrequency response, unity gain 20 Hz - 20 kHz, +/- 0.5 dBDistortion, unity gain, 1 kHz 0 dBu <0.01% +10 dBu <0.1% +20 dBu<0.5%Maximum input level, 1 kHz +21 dBu Maximum output level, 1 kHz +21 dBu Output impedance, 1 kHz 50 ΩThreshold range -50 dBu to +25 dBu knob Ratio 1:1 to ∞Attack 0.1 ms to 20 ms Release 50 ms to 2 secondsPresenceMinimum (fl at) to maximum (typically -3 dB below the source signal level, during gain reduction)Presence centre frequency 5 kHz, bandwidth typically 4 octaves Make up gain 0 dB to +18 dBGain reduction meter 10 segment, 2 dB to 20 dB in 2 dB steps Output level meter6 segment, -30 dBu to +20 dBu in 10 dB steps Side chain high pass filter200 Hz, 12 dB per octavePower RequirementsVoltage+16 V and -16 V Power consumption130 mA, 4.2 WPhysicalDimensions (H x W x D) 132 x 38 x 174 mm (5.2 x 1.5 x 6.9")Weight0.7 kg (1.5 lbs)500 Series Compressor/Limiter with Dynamic Presence ControlCOMPRESSOR LIMITER 522Architecture & Engineering SpecificationsThe Midas 522 module shall provide a single channel compressor/limiter in a standard format 500 series single width module.The 522 module shall provide a fully variable threshold control with a range of -50 dBu to +25 dBu.The 522 module shall provide a fully variable ratio control with a range of 1:1 to infinity.The 522 module shall provide a fully variable attack control with a range of 0.1 ms to 20 ms.The 522 module shall provide a fully variable release control with a range of 50 ms to 2 s.The 522 module shall provide a fully variable dynamic presence control with a range from a flat response to a maximum of 3 dB below the current input signal level. The presence control shall only provide boost during gain reduction. The presence control shall have a centre frequency of 5 kHz and a bandwidth of typically 4 octaves.The 522 module shall provide a fully variable make up gain control with a range of 0 dB to +18 dB.The 522 module shall provide a hard knee pushbutton switch to select between soft and hard knee compression modes.The 522 module shall provide a side chain high pass filter in pushbutton switch to enable the 200 Hz, 12 dB per octave side chain filter.The 522 module shall provide an auto switch to enable automatic program dependant attack and release.The 522 module shall provide a compressor in pushbutton switch to enable or bypass the compressor/limiter. In the event of power loss true hardware bypass shall be enabled.The 522 module shall provide a 10 segment gain reduction meter with a range from 2 dB to 20 dB in 2 dB steps.The 522 module shall provide a 6 segment output level meter with a range from -30 dB to +20 dB in 10 dB steps.The 522 module shall not provide a compressor link or external key function.The 522 module shall provide power up relays to prevent switch on thumps at the output.The 522 module shall provide an electronically balanced audio input with an impedance of 20 kΩ connected to a standard 500 series rack via the modules 15 pin edge connector.The 522 module shall provide a transformer balanced audio output with an impedance of 50Ω connected to a standard 500 series rack via the modules 15 pin edge connector.The 522 module shall be powered from a standard 500 series rack unit and requires +/- 16 VDC @ 130mA.The 522 module dimensions shall be 132 mm high x 38 mm wide x 174 mm deep (5.2 x 1.5 x 6.9"). The nominal weight shall be 0.7 kg (1.5 lbs).The Compressor/limiter shall be the Midas model 522, and no other alternative shall be acceptable.COMPRESSOR LIMITER 522500 Series Compressor/Limiter withDynamic Presence ControlCOMPRESSOR LIMITER 522500 Series Compressor/Limiter withDynamic Presence Control11 of 12500 Series Compressor/Limiter with Dynamic Presence ControlCOMPRESSORLIMITER 522For service, support or more information contact the MIDAS location nearest you:Europe M USIC Tribe Brands UK Ltd.Tel: +44156 273 2290 Email: C ***********************************************************************USA/Canada M USIC Tribe Commercial NV Inc.Tel: +1 702 800 8290 Email: C***********************************************************************JapanMUSIC Tribe Services JP K.K.Tel: +81 3 6231 0453 Email: C***********************************************************************MUSIC Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO are trademarks or registered trademarks of MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 All rights reserved.500 Series Compressor/Limiter with Dynamic Presence ControlCOMPRESSORLIMITER 522。
Peerless-AV Xtreme 外部平板显示器说明书
There has never been an outdoor flat panel display like the Peerless-AV Xtreme™ display. Eliminating the need for vents, filters or exhaust fans, the unique fully-sealed design provides the ultimate protection against weather, water and dust. A patented Dynamic Thermal Transfer TM system keeps internal components safely warmed in extreme cold and properly cooled in extreme heat. The Peerless-AV outdoor flat panel display has the highest ratings for waterproof and dustproof in its class, making it the perfect choice for any location, indoor or out.•Daylight Readable Full HD 1080p resolution for bright, crisp picture•Patented Dynamic ThermalTransfer TM system keeps internal components safely warmed in extreme cold and properly cooled in extreme heat•Polarized models available for use in portrait specific installations•Waterproof Xtreme Soundbar delivers highest quality sound(optional accessory)The CL(P)-55PLC68-OB’s daylight readable display provides a clear, crisp picture even in direct sunlight.********************Xtreme TMOutdoorDaylight Readable DisplayAdditional FeaturesPRODUCT InnovationAward 2013HONORABLE MENTION55" OuTDOOR DiSPlAyDisplay size55" DiagonalFully-sealeD DesignPrevents water,dust or insects from entering the displayPortrait model,CLP-55PLC68-OBambient light sensorAutomatically adjusts brightness to best match the lightingconditionsanti-reFlective, impactresistant saFety glass Protects the screenagainst damagePatented Dynamic Thermal Transfer TM system keeps internal components safely warmed in extreme cold and properly cooled in extreme heatCL-55PLC68-OBThe Xtreme TM Outdoor Daylight Readable Display shall be a Peerless-AV model Cl(P)-55PlC68-OB and shall be located where indicated on the plans.Assembly and installation shall be done according to instructions provided by the manufacturer.liT-1260Package SpecificationsArchitect SpecificationsAccessoriesModel Numbersept650(-s): Outdoor universal Tilt Wall Mount esa763c:Outdoor Articulating Wall MountAll dimensions = inch (mm)cl-55plc68-ob Xtreme TM Outdoor Daylight Readable Display - 55" landscape Outdoor Display clp-55plc68-obXtreme TM Outdoor Daylight Readable Display - 55” Portrait Outdoor Display(800) 865-2112(630) 375-5100Fax: (800) 359-6500peerless-av2300 White Oak Circle Aurora, il 60502 uSAVisit to see the complete line of AV solutions fromPeerless-AV , including outdoor displays, wireless, kiosks, digital audio, display mounts, projector mounts, carts/stands, and a full assortment of accessories.© 2015 Peerless industries, inc. Peerless-AV ® is a registered trademark and Xtreme™ is a trademark of Peerless industries, inc. All rights reserved.Other parties’ marks are the property of their respective owners.+44 (0) 1923 200100Fax: +44 (0) 1923 200101 peerless-av europeunit 3 Watford interchange Colonial Way, Watford Herts, WD24 4WP united Kingdom+52 (81) 8384-8300Fax: +52 (81) 8384-8360peerless-av de méxico Ave de las industrias 413Parque industrial Escobedo Escobedo, N.l., Mexico 66050screen siZe 55” diagonal aspect ratio 16:9resolution 1920 X 1080brightness700CD/M2bacKlight aDjustment Automatic (Ambient light Sensor)contrast ratio 1000:1vieWing angle 178° Vertical/Horizontal response time 9 ms (Gray to Gray)reFresh rate120HzLCD DIsplayclcov-lg-gr: Display Cover - large spK-030:Xtreme™ Soundbaranalog tv NTSC Digital tvATSCpicture aDjustment Brightness/Contrast/Saturatio/Tint/ Sharpness/Noise reduction picture moDe Standard, Dynamic, Personal, Soft color temperature aDjustmentCool, Normal, Warm screen aDjustment Normal/Wide/Zoom clocK, sleep timer yes v-chipyes clocK, sleep timer yes v-chipyes clocK, sleep timer yes v-chipyes clocK, sleep timer yes v-chipyesTV Controller Featurestv input Coax, 75 ohm (x1)vga input15 pin D-SuB (x1)hDmi input HDMi (x3), 480i, 480p, 720p, 1080i, 1080p s-viDeo input Mini DiN (x1)cvbs inputRCA (x1)ypbpr input RCA, 480i, 480p, 720p, 1080i, 1080p vga stereo auDio input 3.5 mm (x1)cvbs stereo auDio inputRCA (x1)ypbpr stereo auDio input RCA (x1)auDio stereo output 8W + 8W, 8 Ohm (Optional Feature)usb yes rs232DB-9 (Male)Input/Output Connectionsoperating temperature -40°F to 140°F rage temperature -40°F to 140°F(unit left Plugged in)ip rating iP68saFety /emcFCC Class BEnvironmentalac input90 VAC to 240 VAC, 47 to 63 HZ poWer consumption Display – 145W (Nominal)low Temperature Heater – 845WPowersiZe (W x h x D) 50.39” x 29.56” x 6.09”(1280 x 751 x 155mm)color BlackMechanicalglassAnti-reflective & uV Protection vesa pattern 600 x 400mm net Weight110lb。
哈苏X2D 100C 数码相机数据表说明书
Camera Type Mirrorless Medium Format Digital Camera with autofocus, auto-exposure, interchangeable lenses Construction Machined aluminium. Tripod socket 1/4”Sensor Type Back-side illuminated (BSI) CMOS, 100 megapixels (11656 × 8742 pixels, pixel size 3.76μm) Sensor Dimensions43.8 × 32.9mmImage Size Stills: 3FR RAW: capture 206MB on averageFile Format Hasselblad 3FR RAW, full size JPEGDrive Mode Single and Continuous Drive, Self Timer, Interval Timer, Exposure BracketingColour Definition16-bit; dynamic range up to 15 stopsImage Stabilization5-axis 7-stop in-body image stabilization (IBIS)ISO Speed Range ISO Auto, 64, 100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600Storage Options Built-in 1TB SSD. Extra CFexpress Type B card with a max storage capacity of 512GB supported.Recommended Memory Cards Sony CEB-G series CFexpress Type B memory cards (128GB)SanDisk Extreme Pro CFexpress Type B memory cards (128GB, 256GB, 512GB)Colour Management Hasselblad Natural Colour Solution (HNCS)Capture Rate 3.3fps in a 14-bit colour depthUser Interface Touch interface including swipe, scroll and pinch/spread to zoom. Camera grip with buttons and scroll wheels.Touch Display 3.6-inch TFT type, 24-bit full-colour, 2.36-million-dot. Touch functionality: full support. Tiltingangle: 40°, 70°Top Display 1.08-in TFT type, 18-bit full-colour, 158,400-dotElectronic Viewfinder (EVF)OLED, 5.76-million-dot. Viewing area: 100%. Magnification: approx. 1.00x with 65mm mediumformat lens at infinity, –1 m-1Histogram Feedback Yes, in Browse mode on touch display and in EVFIR Filter Mounted in front of sensorSoftware Phocus is compatible with computers with 8GB of RAM or more running on macOS 10.15 or later, or Windows 7 64-bit or later.Phocus Mobile 2 is compatible with iPad models with 3GB of RAM or more and with iPhone X or later models running iOS 15.0 or later.iOS Device Support iPad models with 3GB of RAM or more and iPhone X or later models running iOS 15.0 or later Platform Support macOS 10.15 or later, or Windows 7 64-bit or laterHost Connection Type USB 3.1 Gen2 Type-C connector (transfer speed up to 10Gbit/s)Operating Temperature-10° to 45° C (14° to 113° F)Operating Humidity No more than 85% without condensationWi-Fi802.11b/a/g/n/ac/ax, Wi-Fi with 2×2 MIMOSupported Lenses Hasselblad XCD lenses with built-in electronically controlled leaf shutter and aperture. Automatic or manual focusing with instant manual focus override. Lens shades can be mounted in reverse for transport.Compatible with all H System Lenses and some H System accessories using the XH Lens Adapter. Also compatible with V System and XPan Lenses using the XV or XPan Lens Adapter.* The fastest shutter speed varies depending on the lens in use. Refer to the datasheet of the corresponding lens.The specifications are subject to change without notice.ShutterElectronically controlled leaf shutter with speeds up to 1/4000s. Flash sync at all speeds. Optional electronic shutter Shutter Speed68 min to 1/4000s with XCD Lenses*. Up to 1/800s or 1/2000s with HC/HCD Lenses. Electronic shutter 68 min to 1/6000s.Flash Sync SpeedFlash can be used at all shutter speeds. Mechanical shutter only.Flash Control TTL centre weighted system. Compatible with Nikon System flashes. ISO range 64 to 25600. Flash output can be adjusted (-3 to +3 EV) for fill-in purposes independent of ambient light. Sync at all shutter speeds. Mechanical shutter only.Flash Compatibility In TTL-mode, the following Nikon Flash products can be used: SB-300, SB-500, SB-5000, SB-700, SB-900, SB-910. The following Profoto products can be used in TTL-mode: A1, B1 and B2 with Nikon interface.Focusing Autofocus single (AF-S) and manual focus (MF). Instant manual focus override. Automatic focusing using phase and contrast detection. Focus indicator or 100% zoom available in MF. Up to 294 Phase Detection Autofocus (PDAF) zones.Exposure Metering Spot, centre weighted, and centre spotPower Supply Rechargeable Li-ion battery (7.27VDC/3400mAh). Can be charged in-camera via the USB-C port on the camera body. Charging time is approx. two hours using the included 30W USB-C charger.Dimensions 148.5 × 106 × 74.5mmWeight895g (camera body with the battery); 790g (camera body only)。
ACTI E76 2MP 外部弧形摄像头说明书
Firmware Access Browser
Auto Firmware Upgrade GPS Position
E76
Outdoor Dome Camera Progressive Scan CMOS
1/2.8'' 1984(H) X 1225(V) (2.43 MP)
Dome
Bullet
Box
PRODUCT SPECIFICATION
E76
• Device Device Type Image Sensor Sensor Size Effective Pixels Horizontal Resolution Day / Night Low Light Sensitivity Minimum Illumination Color to B/W Switch Mechanical IR Cut Filter IR Sensitivity Range IR LED IR Working Distance Electronic Shutter S/N Ratio
1, Terminal block 1, Terminal block MicroSDHC/MicroSDXC memory card slot (card not included)
PoE Class 2 (IEEE802.3af) / 6.49W (IR on) 1.001 kg (2.207 Ib)
4 configurable regions User defined text on video
Image flip and mirror
8kHz, Mono, PCM, 16 bit encoding, G.711 Terminal block Terminal block