电动驱动器 - 长杆型 - AC Servo 电机规格 LX-135A-AB说明书

Electric Actuator
- Long Stroke Type
- AC Servo Motor Specifications
LX-135A-AB
Feature 1: Maximum speed 1000mm/s. (for Ø10, 20mm lead.)
- Ball screw: Ø10, 10, 15, 20mm lead →Ø8, 2mm, 5mm lead for standard model.
Feature 2: Long stroke specifications (Maximum 400mm)
→Maximum 200mm stroke for LXP standard model
Feature 3: Panasonic AC servo motor (50W)
(Matsushita Electric Industrial Co., Ltd.) (See note1)
- Types of motors (Model No.: MSM5AZP1A, MSM5AZP1B)
- Types of driver units (Model No.: MSD5A1P1E, MSD5A3P1E)
Specifications
Electric actuator
Model LX-135A-ABE
LX-135A-ABF
LX-135A-ABG Stroke mm 50, 100, 150, 200, 250, 300, 350, 400
Motor specifications 【Model No.】Panasonic AC servo motor (50W) 【Model No.】MSM5AZP1A
(Without brake)
MSM5AZP1B (With brake)
Driver unit 【Model No.】Panasonic driver unit for AC servo motor 【Model No.】MSD5A1P1E (For 100VAC) MSD5A3P1E (For 200VAC)
Screw (Ball screw) Ø10; Lead: 10mm Ø10; Lead: 15mm Ø10; Lead: 20mm
Horizontal 6kg Maximum
payload Vertical 5kg 4kg 3kg Maximum thrust 149.7N 99.8N 74.9N
Maximum speed (Note 2) 500mm/s 750mm/s 1000mm/s
Positioning repeatability ±0.03mm
Type of guide Linear ball bearing
Operating temperature range 5 to 40℃(With no condensation)
Home position auto switch PM-L24 (Manufacturer: SUNX Corporation) (See note 1)
Proximity microswitch(Manufacturer: SUNX Corporation) (See note 1)
- Microswitch model No. - Microswitch specifications
Symbol Model No. Type of switch Model No. GXL-8F(B) GXL-8FU GXL-8FUB
GU GXL-8FU N.O. type; 2 wires Repeatability Front sensing, Top sensing: 0.04mm or less
GUB GXL-8FUB N.C. type; 2 wires Power supply voltage 12 to 24VDC±10%, Ripple p-p10% or less
G GXL-8F N.O. type; 3 wires Current consumption 15mA or less
0.8mA or less (With output OFF)
GB GXL-8FB N.C. type; 3 wires
Controlled output
NPN Transistor
Max. load current: 100mA
Max. applied voltage : 30VDC
Residual voltage: 1V or less
Non-contact
DC 2-wire type
Load current: 3 to 70mA
Residual voltage: 3V or less
Maximum
responsefrequency
500Hz 1kHz
Indicator light
Red LED
(Lights up when output is ON)
Green LED (Stable sensing condition)
Red LED (Unstable sensing condition)
Note 1) Refer to each manufacturer’s
technical information for further
details.
Note 2) Due to the acceleration setting that is chosen, as well as payload
conditions, it is possible that the
maximum speed will not be
achieved in certain applications. Operating temperature
range -10 to 55℃-25 to 70℃
SP017X-009E
Issued： Aug 2001
ＳＭＣ CORPORATION
1-16-4 Shimbashi, Minato-ku
Tokyo 105-0004, JAPAN
ＵＲＬ：
P.G. Information
Supplement: If a Panasonic motor driver unit is selected, a power supply connector (5557-10R by Molex) and an interface connector
(10126-3000VE by Sumitomo/3-M Limited) are also required.
Note 2: If motor/driver unit voltage 100VAC or 200VAC is selected from the How to Order page,
a driver unit will automatically be shipped together with your order.
Note 3: The lead wire is connected to EE-SX673 at the factory prior to shipment.。