基于UG的弧面分度凸轮机构的参数化设计及仿真分析的开题报告

基于UG的弧面分度凸轮机构的参数化设计及仿真
分析的开题报告
摘要：
本文以UG为工具，研究了基于UG的弧面分度凸轮机构的参数化设计及仿真分析。

首先介绍了凸轮机构的基本概念和分类，然后详细介绍
了弧面分度凸轮的原理和特点，分析了其优点和应用范围。

接着介绍了UG软件的基本功能和特点，详细讲解了UG的二次开发与参数化建模技术。

在此基础上，结合弧面分度凸轮的特点和应用需求，对其进行了参
数化建模，并使用UG的仿真分析功能对其进行了运动学分析和强度分析。

最后，通过仿真分析结果的对比和验证，证明了该参数化模型的准确性
和可靠性。

本文的研究成果对凸轮机构的优化设计和自动化制造具有一定的参
考意义和实际应用价值。

关键词：弧面分度凸轮；UG；参数化建模；仿真分析
Abstract:
This paper studies the parametric design and simulation analysis of the roller cam mechanism based on UG. Firstly, the basic concept and classification of the cam mechanism are introduced. Then, the principle and characteristics of the arc surface indexing cam are described in detail, and its advantages and application scope are analyzed. Next, the basic functions and characteristics of UG software are introduced, and the secondary development and parametric modeling technology of UG
are explained in detail.
On this basis, the arc surface indexing cam is modeled parameterized, and UG's simulation analysis function is used to perform kinematic analysis and strength analysis. Finally, through the comparison and verification of the simulation analysis results, the accuracy and reliability of the parameterized model are proved.
The research results of this paper have certain reference significance and practical application value for the optimization design and automatic manufacturing of cam mechanism.
Keywords: arc surface indexing cam; UG; parametric modeling; simulation analysis。