0428170132;中文规格书,Datasheet资料
0428789322;中文规格书,Datasheet资料
This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42878-9322Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Vertical, Low Profile, 8/2, KeyedDocuments:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42878 (PDF)Agency CertificationCSA LR19980ULE107635GeneralProduct Family Modular Jacks/Plugs Series42878Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ45UPC800753830202PhysicalBoot Color N/A Color - ResinBlack Durability (mating cycles max)500Flammability94V-0Inverted / Top Latch N/AJack Height12.70mm Keying to Mating Part Yes Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin PolyesterOrientation Vertical (Top Entry)PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 1.57mm Packaging Type TrayPanel MountWith Flange Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Ports1Positions / Loaded Contacts8/2Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +85°C Termination Interface: Style Through Hole Waterproof / Dustproof No Wire/Cable TypeN/A ElectricalCurrent - Maximum per Contact1.5ASeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42878Series Mates With FCC 68 PlugsGrounding to PCB NoGrounding to Panel NoneShielded NoVoltage - Maximum150V AC (RMS)Solder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C235Material InfoReference - Drawing NumbersProduct Specification PS-42878Sales Drawing SDA-42878-****Test Summary TS-42878-001This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0428789322。
0440670402;中文规格书,Datasheet资料
This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:44067-0402Status:ActiveOverview:Micro-Fit 3.0™ ConnectorsDescription:3.00mm Pitch Micro-Fit 3.0™ Wire-to-Board Header, Dual Row, Vertical for up to 3.56mm Thick PCB, 4 Circuits, 0.38µm Gold (Au) Selective PlatingDocuments:3D ModelTest Summary TS-43045-002 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-43045 (PDF)GeneralProduct Family PCB Headers Series44067Application Power, Wire-to-BoardComments High Temperature, Polarization Key to PCB OverviewMicro-Fit 3.0™ Connectors Product Name Micro-Fit 3.0™UPC800754773225PhysicalBreakawayNo Circuits (Loaded)4Circuits (maximum)4Color - ResinBlack Durability (mating cycles max)30First Mate / Last Break No Glow-Wire Compliant No Guide to Mating Part No Keying to Mating Part None Lock to Mating PartYes Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin High Temperature Thermoplastic Net Weight0.741/g Number of Rows 2Orientation Vertical PC Tail Length 4.01mm PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 3.60mm Packaging TypeTray Pitch - Mating Interface3.00mm Pitch - Termination Interface 3.00mm Plating min - Mating0.381µm Plating min - Termination 2.540µm Polarized to PCB Yes Shrouded Fully StackableNo Surface Mount Compatible (SMC)YesTemperature Range - Operating -40°C to +105°CTermination Interface: StyleThrough Hole - Kinked Pin ElectricalCurrent - Maximum per Contact 5A Voltage - Maximum250VSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 44067SeriesMates With43025 Micro-Fit™ HeaderSolder Process DataDuration at Max. Process Temperature (seconds)30Lead-free Process Capability SMC & Wave Capable (TH only)Max. Cycles at Max. Process Temperature3Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-43045Sales Drawing SD-44067-001Test Summary TS-43045-002This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0440670402。
7440430022;中文规格书,Datasheet资料
description :A mmB mm Cmm D mm Emm= Start of winding Marking = Inductance codeEigenschaften / properties Wert / valueEinheit / unittol.Induktivität /inductanceDC-Widerstand /DC-resistance DC-Widerstand /DC-resistance Nennstrom /rated currentSättigungsstrom /saturation current Eigenres.-Frequenz /self-res.-fequency33% Umgebungstemperatur / temperature:+20°CFerrit Endoberfläche / finishing electrode:CZ10-08-01ME 09-01-15MST 08-04-11MST 04-10-11MST04-08-09MPH03-03-20Name Datum / dateKunde / customerFreigabe erteilt / general release:C Lötpad / soldering spec.:B Elektrische Eigenschaften / electrical properties:E Testbedingungen / test conditions:Luftfeuchtigkeit / humidity:It is recommended that the temperature of the part does F Werkstoffe & Zulassungen / material & approvals:Draht / wire:Class HG Eigenschaften / general specifications:Betriebstemp. / operating temperature: -40°C - + 125°C Sn/Ag/Cu - 96.5/3.0/0.5%DATUM / DATE : 2010-08-01max.mA Datum / date.................................................................................Unterschrift / signature Kontrolliert / approvedTestbedingungen / test conditions D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked SRFMHzUmgebungstemp. / ambient temperature: -40°C - + 85°C Basismaterial / base material:not exceed 125°C under worst case operating conditions.POWER-CHOKE WE-TPCA Mechanische Abmessungen / dimensions:1,60 typ.1,60typ.2,8 ± 0,2HP 34401 A für/for R DC und I DC0,028± 30%2,20µH2350R DC typ 0,023I DC D Prüfgeräte / test equipment:HP 4274 A für/for L und/and Q @ 20°C @ 20°C ∆T=30 K 100 kHZ / 0,1V2500100,0I sat |ΔL/L|<35%Version 5.....................................................................................................................................................................................................................................................Würth Elektroniktyp.R DC max typ.L max.mA typ.Version 44,8 ± 0,24,8 ± 0,2Type 4828Änderung / modificationVersion 1Version 2Version 3Version 6[mm]5,302,001,502,001,80MarkingABCDDEdescription :CZ10-08-01ME 09-01-15MST 08-04-11MST 04-10-11MST04-08-09MPH03-03-20Name Datum / dateFreigabe erteilt / general release:Kontrolliert / approvedDATUM / DATE : 2010-08-01Würth ElektronikKunde / customer...................................................................................................................................................................POWER-CHOKE WE-TPCH Induktivitätskurve / Inductance curve :Version 4Version 5Änderung / modificationVersion 1Version 2Version 3D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Datum / dateUnterschrift / signature Version 6 ...................................................................................................................................................................Geprüft / checked 0,000,501,001,502,002,500,000,501,001,502,002,503,003,50L (µH )Current (A)Induktivität vs Strom (typ.) / Inductance vs Current (typ.)description :I Rollenspezifikation / tape and reel specification:A 8,0± 1,0mm B4,00± 0,1mma 178± 0,5mmb 20,20± 0,1mm+ 0,5- 1,0d 50,0± 1,0mmCZ10-08-01ME 09-01-15MST 08-04-11MST 04-10-11MST04-08-09MPH03-03-20Name Datum / dateWürth Elektronik...................................................................................................................................................................Würth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modification...................................................................................................................................................................Datum / dateUnterschrift / signature Gurtspezifikation / Tape specification: Rollenspezifikation / Reel specification:Freigabe erteilt / general release:Kunde / customermm 13,00POWER-CHOKE WE-TPCDATUM / DATE : 2010-08-01Version 5c Version 1Version 2Version 3Version 4Version 6Ø cadbThe force for tearing off cover tape is 20 to 70 grams in arrow direction150feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control),transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7440430022。
744732121;中文规格书,Datasheet资料
2.0 1.02012-08-272010-01-11SStCZCZWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]C Schematic:F Typical Inductance vs. Current Characteristics:H4: Classification Wave Soldering Profile:H5: Classification Wave ProfileProfile FeaturePreheat- Temperature Min (T smin )- Temperature Typical (T stypical ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Δ preheat to max Temperature Peak temperature (T p )Time of actual peak temperature (t p )Ramp-down rate - Min - Typical - MaxTime 25°C to 25°C Pb-Free Assembly 100°C 120°C 130°C 70 seconds 150°C max.250°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesSn-Pb Assembly 100°C 120°C 130°C 70 seconds 150°C max.235°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesrefer to EN 61760-1:2006H Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-TISof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the wire in-sulation, the marking or the plating. The washing varnish agent could have a negative effect on the long turn function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical wave soldering specification, otherwise no warranty will be sustai-ned.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.•Due to heavy weight of the components of size 1014, strong forces and high accelerations might have the effect to damage the electrical connection or to harm the circuit board and will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744732121。
414;中文规格书,Datasheet资料
/
414
DC axial compact fan
Product drawing
Web data sheet XI · Page 3 of 4 ebm-papst St. Georgen GmbH & Co. KG · Hermann-Papst-Straße 1 · D-78112 St. Georgen · Phone +49 7724 81-0 · Fax +49 7724 81-1309 · info2@ ·
Mass Dimensions Material of impeller Housing material Direction of air flow Direction of rotation Bearing Lifetime L10 at 20 °C Lifetime L10 at 60 °C Connection line Motor protection Approval
/
分销商库存信息:
EBM-PAPST 414
/
414
DC axial compact fan
Technical features
General description Particular design features: Compact fan with low power consumption. Some models suitable for use at high ambient temperatures. General features: Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. Electronic commutation completely integrated. Protected against reverse polarity and locking. Connection via single strands AWG 28, TR 64, bared and tin-plated. Air exhaust over bars. Direction of rotation counter-clockwise seen on rotor. Masse: 17 g. 0.027 kg 40 x 40 x 20 mm Fiberglass-reinforced PA plastic Fiberglass-reinforced PBT plastic Air exhaust over bars Left, looking at rotor Sintec sleeve bearing 50000 h 20000 h Single strands AWG 28, TR 64, bared and tin-plated. Protected against reverse polarity and locking. VDE, CSA, UL
760802122;中文规格书,Datasheet资料
1.1 1.02012-06-282012-05-01SStSStSStMiBrWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Inductance vs. Current Characteristics:H4: Classification Wave Soldering Profile:H5: Classification Wave ProfileProfile FeaturePreheat- Temperature Min (T smin )- Temperature Typical (T stypical ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Δ preheat to max Temperature Peak temperature (T p )Time of actual peak temperature (t p )Ramp-down rate - Min - Typical - MaxTime 25°C to 25°C Pb-Free Assembly 100°C 120°C 130°C 70 seconds 150°C max.250°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesSn-Pb Assembly 100°C 120°C 130°C 70 seconds 150°C max.235°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesrefer to EN 61760-1:2006H Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-PFCof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the wire in-sulation, the marking or the plating. The washing varnish agent could have a negative effect on the long turn function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical wave soldering specification, otherwise no warranty will be sustai-ned.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.•Due to heavy weight of the component, strong forces and high accelerations might have the effect to damage the electrical connection or to harm the circuit board and will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 760802122。
mp2984中文规格书
mp2984中文规格书英文回答：MP2984 Data Sheet (Chinese Version)。
The MP2984 is a low-power, step-down, switching regulator with an integrated inductor. It is ideal for battery-powered applications due to its high efficiency and compact size. The MP2984 is available in a variety of package options, including a 5-pin SOT-23 package and a 6-pin SOT-23 package.The MP2984 has a wide input voltage range of 2.3V to 6.5V, and it can deliver an output voltage as low as 0.6V. The MP2984 is also highly efficient, with a typical efficiency of over 90%.The MP2984 is easy to use, and it requires only a few external components. The MP2984 is a great choice for battery-powered applications where size, efficiency, andease of use are important.Features:Input voltage range: 2.3V to 6.5V.Output voltage range: 0.6V to VIN.Output current: up to 1A.High efficiency: up to 94%。
4802.1300;中文规格书,Datasheet资料
500V dc 500V 1000V dc 1000V dc
0.65A @ 12V ac/dc 1A @ 12V ac/dc 2A @ 12V ac/dc 2A @ 12V ac/dc
<15 m Ω <15 m Ω <15 m Ω <15 m Ω
103 M Ω @ 500V dc 103 M Ω @ 500V dc 103 M Ω @ 500V dc 103 M Ω @ 500V dc
6
/
分销商库存信息:
SCHURTER 4802.1300
-20° to +70°C -20° to +70°C -20° to +70°C -20° to +70°C
10,000 insertions 10,000 insertions 10,000 insertions 50,000 insertions 10,000 insertions
Dielectric Withstand measured between adjacent conductors Die Spannungsfestigkeit wird zwischen den gegenüberliegend Kontakten gemessen.
All contact surfaces on each of the mating sockets are gold-plated for long life and reduced contact resistance. The range consists of 2.5mm, 3.5mm, 6.5mm and 7.5mm sizes in 2 up to 6 switched poles. Standards/Compatibility The 2.5mm range is fully compatible with the JAP standard. To avoid compatibility problems it is advisable not to mix the 3.5mm plugs and sockets with other manufacturers’ products, as this range is not designed to JAP standards. The 6.3mm range is designed and manufactured according to the BPO standard Gauge A and is fully compatible with the JAP standard. For the combination chart please see Page 17.
0428788506;中文规格书,Datasheet资料
This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42878-8506Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Vertical, Low Profile, 8/8Documents:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42878 (PDF)Agency CertificationCSA LR19980ULE107635GeneralProduct Family Modular Jacks/Plugs Series42878CommentsFlush Mount|Flangeless|2 PCB Thick Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ45UPC800753827998PhysicalBoot Color N/A Color - ResinBlack Durability (mating cycles max)500Flammability94V-0Inverted / Top Latch N/AJack Height12.70mm Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin Polyester Net Weight 2.246/gOrientation Vertical (Top Entry)PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 3.18mm Packaging TypeTray Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Plating min - Mating1.270µm Plating min - Termination2.540µm Ports1Positions / Loaded Contacts8/8Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +85°C Termination Interface: Style Through Hole Waterproof / Dustproof No Wire/Cable TypeN/ASeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42878Series Mates With FCC 68 PlugsElectricalCurrent - Maximum per Contact 1.5AShielded NoVoltage - Maximum150V AC (RMS)Solder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C235Material InfoReference - Drawing NumbersProduct Specification PS-42878Sales Drawing SDA-42878-****Test Summary TS-42878-001This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0428788506。
0460110602;中文规格书,Datasheet资料
This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:46011-0602Status:ActiveOverview:Mini-Fit® Plus HCSDescription:4.20mm Pitch Mini-Fit® Plus HCS Header, Dual Row, Vertical, Blind Mating, 6 Circuits,with Snap-in Plastic Peg PCB Lock, PA Polyamide Nylon 6/6, UL 94V-0, Tin (Sn)1.27µm Over Nickel (Ni) Plating, Halogen FreeDocuments:3D ModelProduct Specification PS-45750-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationULE29179GeneralProduct Family PCB Headers Series46011Application Board-to-Board, Power, Wire-to-BoardCommentsCurrent = 13A max. per circuit when header is mated to a receptacle loaded with 45750 Mini-Fit® Plus HCS Crimp Terminal Crimped to 16 AWG wire., See Molex product specification PS-45750-001 for additional current de-rating information.OverviewMini-Fit® Plus HCS Product Name Mini-Fit® Plus HCS UPC822350726009PhysicalBreakawayNo Circuits (Loaded)6Circuits (maximum)6Color - ResinNatural Durability (mating cycles max)30First Mate / Last Break No Flammability94V-0Glow-Wire Compliant Yes Guide to Mating Part Yes Keying to Mating Part None Lock to Mating Part YesMaterial - MetalCopper Alloy Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight2.032/g Number of Rows 2Orientation Vertical PC Tail Length 1.80mm PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 1.78mm Packaging TypeTray Pitch - Mating Interface 4.20mm Plating min - Mating2.540µm Plating min - Termination 1.270µm Polarized to Mating Part Yes Polarized to PCBYesSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 46011SeriesMates With15060041 Mini-Fit® BMI Panel Mount Receptacle, 39012045 Mini-Fit Jr.™Receptacle, 460100422 Mini-Fit® Plus HCS Receptacle HeaderShrouded FullyStackable NoSurface Mount Compatible (SMC)NoTemperature Range - Operating-40°C to +105°CTermination Interface: Style Through HoleElectricalCurrent - Maximum per Contact13AVoltage - Maximum600VSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C240Material InfoReference - Drawing NumbersProduct Specification PS-45750-001Sales Drawing SD-46011-001This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0460110602。
0424910288;中文规格书,Datasheet资料
42491
Group Header No: Pin No: OPTIONS Plating: Pin Length L Mating PC Tail Tin Loc Pack Per Ckts 2 3 4 5 6 7 8 9 10 11 12 26-64-4061 Material No M P T Gold Loc G A-42491-0172/0188 41790-0019/0035 43294-0661 197 - TIN 30.48/ 1.200 13.28/ .523 N/A 13.89/ .547 OVERALL NONE PK-42491-003 Engineer Number A-42491-0172 A-42491-0173 A-42491-0174 A-42491-0175 A-42491-0176 A-42491-0177 A-42491-0178 A-42491-0179 A-42491-0180 A-42491-0181 A-42491-0182 Group Header No: Pin No: Plating: Pin Length L Mating PC Tail Tin Loc Pack Per Material No 42491-0223 42491-0224 42491-0225 42491-0226 42491-0227 42491-0228 42491-0229 42491-0230 42491-0231 42491-0232 42491-0233 M P T Gold Loc G A-42491-0223/0239 41790-0019/0035 43294-0240 197 - TIN 19.05/. 750 11.43/. 450 N/A 4.32/. 170 OVERALL NONE PK-42491-001 Engineer Number A-42491-0223 A-42491-0224 A-42491-0225 A-42491-0226 A-42491-0227 A-42491-0228 A-42491-0229 A-42491-0230 A-42491-0231 A-42491-0232 A-42491-0233 42491-0240 27-62-4087 42491-0242 42491-0243 42491-0244 42491-0245 A-42491-0240 A-42491-0241 A-42491-0242 A-42491-0243 A-42491-0244 A-42491-0245 42491-0252 27-62-4068 42491-0254 42491-0255 42491-0256 42491-0257 42491-0258 42491-0259 A-42491-0252 A-42491-0253 A-42491-0254 A-42491-0255 A-42491-0256 A-42491-0257 A-42491-0258 A-42491-0259 Group Header No: Pin No: Plating: Pin Length L Mating PC Tail Tin Loc Pack Per Material No M P T Gold Loc G A-42491-0240/0251 41790-0023/0035 43294-0214 197 - TIN 18.29/. 720 11.43/. 450 N/A 3.56/. 140 OVERALL 7 PK-42491-001 Engineer Number Group Header No: Pin No: Plating: Pin Length L Mating PC Tail Tin Loc Pack Per Material No M P T Gold Loc G A-42491-0252/0265 41790-0022/0035 43294-0214 197 - TIN 18.29/. 720 11.43/. 450 N/A 3.56/. 140 OVERALL 5 PK-42491-001 Engineer Number
0424109128;中文规格书,Datasheet资料
This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42410-9128Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Vertical, 8/4, Keyed, Panel StopsDocuments:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42410 (PDF)GeneralProduct Family Modular Jacks/Plugs Series42410Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ45UPC800753821118PhysicalBoot Color N/A Color - ResinBlack Durability (mating cycles max)500Inverted / Top Latch N/AJack Height16.38mm Keying to Mating Part Yes Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin PolyesterOrientation Vertical (Top Entry)PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 3.18mm Packaging Type TrayPanel MountWith Flange Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Ports1Positions / Loaded Contacts8/4Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +85°C Termination Interface: Style Through Hole Waterproof / Dustproof No Wire/Cable TypeN/AElectricalCurrent - Maximum per Contact 1.5A Grounding to PCB No Grounding to Panel None ShieldedNoVoltage - Maximum150V AC (RMS)Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42410SeriesSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C235Material InfoReference - Drawing NumbersProduct Specification PS-42410Test Summary TS-42878-001This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0424109128。
7440700022;中文规格书,Datasheet资料
description :33% Umgebungstemperatur / temperature:+20°CFerrit/ ferrite ME 09-04-21ME 08-11-26ME08-04-14ME 08-02-14NameDatum / dateÄnderung / modificationVersion 1Version 2Version 3Version 4Betriebstemp. / operating temperature: -40°C - +125°C Basismaterial / base material:Draht / wire:Class H Luftfeuchtigkeit / humidity:F Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:Freigabe erteilt / general release:Kunde / customer...........................................................................................E Testbedingungen / test conditions:Metra Hit 27I für/for R DC;Agilent N5776A für/for I DC;WAYNE KERR 3260B für/for L 0; I SAT D Prüfgeräte / test equipment:It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.Würth Elektronik..................................................................................http://www.we-online.deDatum / date..................................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Endoberfläche / finishing electrode:Ag/Ni/SnUmgebungstemp. / ambient temperature: -40°C - +85°C POWER-CHOKE WE-TPCdescription :ME 09-04-21ME 08-11-26ME08-04-14ME 08-02-14NameDatum / dateVersion 1Version 4Version 2Version 3POWER-CHOKE WE-TPCDATUM / DATE : 2009-04-21H Induktivitätskurve / Inductance curve:Freigabe erteilt / general release:Kunde / customer....................................................................................................................................................................Datum / dateUnterschrift / signature Würth Elektronik...........................................................................................Geprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationhttp://www.we-online.dedescription :I Rollenspezifikation / tape and reel specification:A 4,00± 0,1mmB 12,00± 0,1mmC 16,0± 0,2mma 178,0± 2,0mmb 21,00± 0,8mmc 13,00± 0,5mmd 50,00± 1,0mmME 09-04-21ME 08-11-26ME08-04-14ME 08-02-14NameDatum / dateÄnderung / modificationVersion 1Version 2Version 3Version 4POWER-CHOKE WE-TPCDATUM / DATE : 2009-04-21http://www.we-online.de...........................................................................................Geprüft / checked Kontrolliert / approvedDatum / dateWürth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Freigabe erteilt / general release:Kunde / customer....................................................................................................................................................................Gurtspezifikation / Tape specification:Rollenspezifikation / Reel specification:Unterschrift / signatureWürth Elektronik eiSos GmbH & Co. KGEnd Startfeeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7440700022。
0430450201;中文规格书,Datasheet资料
This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:43045-0201Status:ActiveOverview:Micro-Fit 3.0™ ConnectorsDescription:3.00mm Pitch Micro-Fit 3.0™ Header, Surface Mount Compatible, Dual Row, Right Angle, with Snap-in Plastic Peg PCB Lock, 2 Circuits, 0.38µm Gold (Au) Selective Plating, Glow Wire CompatibleDocuments:3D ModelTest Summary TS-43045-002 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-43045 (PDF)Product Literature (PDF)Test Summary TS-43045-001 (PDF)Agency CertificationCSA LR19980TUV R72081037ULE29179GeneralProduct Family PCB Headers Series43045Application Power, Wire-to-BoardComments"Glow Wire Equivalent Part Number 430450201 , High Temperature, Square Pin, Solder Type<P><P>This Molex product is manufactured from material that has the following ratings, tested by independent agencies:.a) A Glow Wire Ignition Temperature (GWIT) of at least 775 deg C per IEC 60695-2-13.. b) A Glow Wire Flammability Index (GWFI) above 850 deg C per IEC 60695-2-12.and hence complies with therequirements set out in the International Standard IEC 60335-1 5th edition - household and similar electrical appliances - safety, section 30 Resistance to heat and fire. <P><P> The customers using this product must determine its suitability for use in their particular application through testing or other acceptable means as described in end-product glow-wire flammability test standard IEC 60695-2-11 and any applicable product end-use standard(s). <P> If it is determined during the customer’s evaluation of suitability, that higher performance is required, please contact Molex for possible product options."OverviewMicro-Fit 3.0™ Connectors Product Literature Order No 987650-5984Product Name Micro-Fit 3.0™UPC800754369732PhysicalBreakawayNo Circuits (Loaded)2Circuits (maximum)2Color - ResinBlack Durability (mating cycles max)30Flammability94V-0Glow-Wire Compliant YesMated Height10.29mmSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 43045Series Mates With 43025Material - Metal BrassMaterial - Plating Mating GoldMaterial - Plating Termination TinMaterial - Resin High Temperature ThermoplasticNet Weight0.540/gNumber of Rows2Orientation Right AnglePCB Locator YesPCB Retention YesPCB Thickness - Recommended 1.60mmPackaging Type TrayPitch - Mating Interface 3.00mmPlating min - Mating0.381µmPlating min - Termination 2.540µmPolarized to PCB YesShrouded FullyStackable NoSurface Mount Compatible (SMC)YesTemperature Range - Operating-40°C to +105°CTermination Interface: Style Through HoleElectricalCurrent - Maximum per Contact5AVoltage - Maximum250VSolder Process DataDuration at Max. Process Temperature (seconds)30Lead-free Process Capability SMC & Wave Capable (TH only)Max. Cycles at Max. Process Temperature3Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-43045, RPS-43045-003, RPS-43045-004Sales Drawing SD-43045-001, SDIN-43045-0001Test Summary TS-43045-001, TS-43045-002This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0430450201。
0444280403;中文规格书,Datasheet资料
This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:44428-0403Status:ActiveOverview:Micro-Fit 3.0™ ConnectorsDescription:3.00mm Pitch Micro-Fit 3.0 BMI™ Header, Surface Mount Compatible, Dual Row, Right Angle, with Snap-in Plastic Peg PCB Lock, 4 Circuits, 0.76µm Gold (Au) Selective PlatingDocuments:3D ModelRoHS Certificate of Compliance (PDF)Drawing (PDF)Product Literature (PDF)Product Specification PS-44300-001 (PDF)Agency CertificationCSA LR19980TUV R72081037ULE29179GeneralProduct Family PCB Headers Series44428Application Board-to-Board, Power, Wire-to-BoardCommentsHigh Temperature|Square Pin|Solder Type|Polarized to Mating PartOverviewMicro-Fit 3.0™ Connectors Product Literature Order No 987650-5984Product Name Micro-Fit 3.0 BMI™UPC800756379944PhysicalBreakawayNo Circuits (Loaded)4Circuits (maximum)4Color - ResinBlack Durability (mating cycles max)30First Mate / Last Break No Flammability94V-0Glow-Wire Compliant No Guide to Mating Part No Keying to Mating Part None Lock to Mating Part Yes Material - MetalBrass Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin High Temperature Thermoplastic Net Weight1.394/g Number of Rows 2Orientation Right Angle PC Tail Length 3.50mm PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 1.60mm Packaging TypeTray Pitch - Mating Interface 3.00mm Plating min - Mating0.762µm Plating min - Termination 2.540µm Polarized to PCBYesSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 44428SeriesMates With44133 , 44764 , 44769Shrouded FullyStackable NoSurface Mount Compatible (SMC)YesTemperature Range - Operating-40°C to +105°CTermination Interface: Style Through HoleElectricalCurrent - Maximum per Contact5AVoltage - Maximum250VSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-44300-001, RPS-44300-001Sales Drawing SD-44428-001This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0444280403。
0424106552;中文规格书,Datasheet资料
This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42410-6552Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Vertical, 6/2, Panel StopsDocuments:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42410 (PDF)GeneralProduct Family Modular Jacks/Plugs Series42410CommentsFlush Mount|Flangeless|2 PCB Thick Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ11UPC800753815520PhysicalColor - ResinBlack Durability (mating cycles max)500Inverted / Top Latch N/AJack Height16.38mm Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin PolyesterOrientation Vertical (Top Entry)PCB RetentionYes PCB Thickness - Recommended 3.20mm Packaging TypeTray Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Ports1Positions / Loaded Contacts6/2Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +80°C Termination Interface: Style Through Hole Wire/Cable TypeN/A ElectricalCurrent - Maximum per Contact 1.5A ShieldedNo Voltage - Maximum125VSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process CapabilityWave Capable (TH only)Max. Cycles at Max. Process Temperature 1Process Temperature max. C235Material InfoSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42410Series Mates With FCC 68 PlugsReference - Drawing NumbersProduct Specification PS-42410Test Summary TS-42878-001This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0424106552。
0428786504;中文规格书,Datasheet资料
This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42878-6504Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Vertical, Low Profile, 6/2, Panel StopsDocuments:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42878 (PDF)Agency CertificationCSA LR19980ULE107635GeneralProduct Family Modular Jacks/Plugs Series42878CommentsFlush Mount|Flangeless|2 PCB Thick Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ11UPC800753826779PhysicalBoot Color N/A Color - ResinBlack Durability (mating cycles max)500Flammability94V-0Inverted / Top Latch N/AJack Height12.70mm Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin PolyesterOrientation Vertical (Top Entry)PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 1.57mm Packaging TypeTray Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Plating min - Mating1.270µm Plating min - Termination2.540µm Ports1Positions / Loaded Contacts6/2Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +85°C Termination Interface: Style Through Hole Waterproof / Dustproof No Wire/Cable TypeN/AElectricalSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42878Series Mates With FCC 68 PlugsCurrent - Maximum per Contact 1.5AShielded NoVoltage - Maximum150V AC (RMS)Solder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C235Material InfoReference - Drawing NumbersProduct Specification PS-42878Sales Drawing SDA-42878-****Test Summary TS-42878-001This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0428786504。
0442060002;中文规格书,Datasheet资料
This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:44206-0002Status:ActiveOverview:Mini-Fit Jr.™Description:4.20mm Pitch Mini-Fit Jr.™ Header, Dual Row, Vertical, with 11.90mm Locking Ramp,24 Circuits, without Snap-in Plastic PegsDocuments:3D ModelRoHS Certificate of Compliance (PDF)Drawing (PDF)Agency CertificationULE29179GeneralProduct Family PCB Headers Series44206Application Power, Wire-to-BoardCommentsCurrent = 13A max. per circuit when header is mated to a receptacle loaded with 45750 Mini-Fit® Plus HCS Crimp Terminal Crimped to 16 AWG wire., See Molex product specification PS-45750-001 for additional current de-rating information.OverviewMini-Fit Jr.™Product Name Mini-Fit Jr.™UPC822350009577PhysicalBreakawayNo Circuits (Loaded)24Circuits (maximum)24Color - ResinNatural Durability (mating cycles max)30First Mate / Last Break No Flammability94V-2Glow-Wire Compliant No Guide to Mating Part Yes Keying to Mating Part Yes Lock to Mating Part Yes Material - MetalBrass Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight5.010/g Number of Rows 2Orientation Vertical PC Tail Length 3.30mm PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 1.80mm Packaging TypeTray Pitch - Mating Interface 4.20mm Plating min - Mating0.889µm Plating min - Termination 0.889µm Polarized to PCB Yes Shrouded Fully StackableNoSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 44206SeriesMates With5557 Mini-Fit Jr.™ Receptacle HousingSurface Mount Compatible (SMC)NoTemperature Range - Operating-40°C to +105°CTermination Interface: Style Through HoleElectricalCurrent - Maximum per Contact13AVoltage - Maximum600VMaterial InfoReference - Drawing NumbersSales Drawing SDA-44206-001This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0442060002。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
This document was generated on 08/08/2012
PLEASE CHECK FOR LATEST PART INFORMATION
Part Number:42817-0132Status:Active
Overview:Mini-Fit Sr.™
Description:
Mini-Fit Sr.™ Grounding Crimp Terminal, Male, 8 AWG Gold (Au)
Documents:Drawing (PDF)
Test Summary TS-42815-001 (PDF)Product Specification PS-42815-001 (PDF)RoHS Certificate of Compliance (PDF)
Application Specification AS-42815-001 (PDF)
General
Product Family Crimp Terminals Series
42817Application Power
Comments
High Current/Low Force|Grounding Pin Crimp Quality Equipment Yes
Overview
Mini-Fit Sr.™Product Name Mini-Fit Sr.™UPC
800756523323
Physical
Gender
Male
Material - Metal
High Performance Alloy (HPA)Material - Plating Mating
Gold Material - Plating Termination Tin Net Weight
3.216/g Packaging Type Reel Plating min - Mating
0.762µm Plating min - Termination 2.540µm
Termination Interface: Style Crimp or Compression Wire Insulation Diameter 6.60mm max.Wire Size AWG 12+12, 8Wire Size mm²
N/A Electrical
Current - Maximum per Contact
50A
Material Info
Reference - Drawing Numbers
Application Specification AS-42815-001
Product Specification
PS-42815-001, RPS-42815-001, RPS-42815-011,RPS-42815-012, RPS-42815-013, RPS-42815-014,RPS-42815-015Sales Drawing SD-42817-*Test Summary
TS-42815-001
Series
image - Reference only
EU RoHS
China RoHS
ELV and RoHS Compliant REACH SVHC
Contains SVHC: No Low-Halogen Status Low-Halogen
Need more information on product environmental compliance?
Email productcompliance@
For a multiple part number RoHS Certificate of Compliance, click here
Please visit the Contact Us section for any non-product compliance questions.
Search Parts in this Series 42817Series
Application Tooling | FAQ
Tooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.Global
Description Product #Hand Crimper - SPECIAL
INSULATION CRIMP 0638111500Manual Extraction Tool
0638130400Mini-Mac™Applicator 0638911000Mini-Mac™Applicator for Terminals
0638919500This document was generated on 08/08/2012
PLEASE CHECK FOR LATEST PART INFORMATION
分销商库存信息: MOLEX 0428170132。