03-09-1042;中文规格书,Datasheet资料
7443320470;中文规格书,Datasheet资料
Bezeichnung :description :33%Umgebungstemperatur / temperature:+20°CFerriteLagertemp. / storage temperature: -40°C - +60°C BD09-11-03Rst 09-05-05NameDatum / dateÄnderung / modificationVersion 1Version 2Luftfeuchtigkeit / humidity:It is recommended that the temperature of the part does HP 34401 A & Fluke 54II für/for I DC; SPEICHERDROSSEL WE-HCC 1210 (Ferrit)POWER-CHOKE WE-HCC 1210 (Ferrite)Artikelnummer / part number :7443320470D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked .................................................................................................Basismaterial / base material:Metra HIT 27I für/for R DCArbeitstemperatur / operating temperature: -40°C - +125°C WAYNE KERR 3260B für/for L 0; I SAT D Prüfgeräte / test equipment:E Testbedingungen / test conditions:Kunde / customerF Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:not exceed 125°C under worst case operating conditions.Draht / wire:JIS 155°C , UL : E201757Würth Elektronik..................................................................................Freigabe erteilt / general release:http://www.we-online.deDatum / date.............................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGdatecode & part numberBezeichnung :description :H Induktivitätskurve / Inductance curve:BD09-11-03Rst 09-05-05NameDatum / dateSPEICHERDROSSEL WE-HCC 1210 (Ferrit)POWER-CHOKE WE-HCC 1210 (Ferrite)DATUM / DATE : 2009-11-03Freigabe erteilt / general release:Kunde / customer...............................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikVersion 2..........................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGBezeichnung :description :I Temperaturanstieg / Temperature rise curve:BD09-11-03Rst 09-05-05NameDatum / dateDATUM / DATE : 2009-11-03Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400...............................................................................................................................................................Datum / dateUnterschrift / signaturehttp://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGSPEICHERDROSSEL WE-HCC 1210 (Ferrit)POWER-CHOKE WE-HCC 1210 (Ferrite)Freigabe erteilt / general release:Kunde / customerWürth ElektronikVersion 2..........................................................................................................................................Bezeichnung :description :BD09-11-03Rst 09-05-05NameDatum / dateSPEICHERDROSSEL WE-HCC 1210 (Ferrit)POWER-CHOKE WE-HCC 1210 (Ferrite)Freigabe erteilt / general release:Kunde / customer...............................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikVersion 2............................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGThe Force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7443320470。
19493;中文规格书,Datasheet资料
Ionization Test KitDescriptionThe Desco Ionization Test Kit allows the 19492 Digital Static Field Meter to be used to measure the offset Charged insulators in the ESD protected area can adversely impact quality, productivity, and reliability.“When any object becomes electrostatically charged, there is an electrostatic field associated with that charge. If an ESDS (ESD sensitive) device is placed in thatFigure 1. Desco 19493 Ionization Test KitFRONT VIEWBACK VIEWFigure 2. Digital Static Field Meter features andBACK VIEWFigure 3. Charger features and components18"12"Figure 5. Auditing ionization equipment with the DigitalStatic Field Meter and Conductive Plate (Ref: ANSI/ESD Figure 4. Installing the 19498 Conductive PlateThousandsHundredsTensFigure 6. Reading the Digital Static Field Meter while in the ±20 kV rangeHundredsTensOnesFigure 7. Reading the Digital Static Field Meter while in the ±2 kV rangePer ESD TR53-2006 Compliance Verification of ESD Protective Equipment and Materials Air Ionizer Test Procedure Initial Test Setup “Measurements should beNEGATIVE DISCHARGE TIME MEASUREMENTSTo provide a NEGATIVE voltage output, touch the plate located underneath the Charger, and press the switch downward at the same time. Momentarily touch the Charger’s output terminal to the conductive plate attached to the Field Meter. The meter reads approximately -1.10 kV. By using a stop watch or other timing device, determine the time needed for the voltages to decrease from -1.10 kV to -0.10 kV. This is the negative discharge time.IMPORTANT: A ground path must be provided between the touch plate of the Charger and the ground reference of the Field Meter. This is normally provided by holding the Charger in one hand and the Field Meter with Conductive Plate in the other.The battery in the Charger should be replaced annually or when it is unable to provide approximately ±1100V. CLEANINGIt is important to keep the insulators on the adapter plate clean and free of contaminates that may cause surface leakage. To test the performance of the adapter plate, charge the plate and note the discharge rate in a nonion-ized area. The self discharge rate to 10% of original voltage should not be less than five minutes.The area around the aperture of the Digital Static Field Meter must be kept clean to ensure accurate, drift-free readings. Never touch the aperture with anything. To remove dust or other particulate matter, use low-pressure instrument-grade air. To remove more severe contamination, spray or flush with the smallest practical amount of clean technical-grade of isopropyl alcohol. Then allow the instrument to air dry for several hours. SpecificationsDIGITAL STATIC FIELD METERMeasurement Range (switch selectable)Low Range: 0 to ±1.99 kV / inchHigh Range: 0 to ±19.99 kV / inch Measurement AccuracyVoltage Monitor Output: > ±5% of reading ±10 mV Voltage Display: > ±5% of reading ±2 counts Measurement Stability±10 countsAutomatic ShutoffUnit will shut off after 20 minutes after last switch activity Power RequirementsOne (1) 9V alkaline batteryOperating TimeGreater than 50 hours, with new battery at 21°C continuous usageOperating ConditionsTemperature: 10-30°CRelative Humidity: Up to 80%, non-condensing Altitude: Up to 2,000 meters Dimensions0.94" H x 2.75" W x 4.94" L(23.9mm H x 69.9mm W x 125.5mm L)Weight (with battery)4.9 oz(153 g)Voltage Monitor Connection2.5mm audio jackCE CertifiedFigure 8. Taking decay measurementsMaintenanceThe Digital Static Field Meter is factory calibrated and no maintenance is required. If for any reason you believe the Meter is not working correctly, please contact Desco Customer Service. CAUTION - There are no user serviceable parts. Any unauthorized service will void the warranty and result in additional repair charges.Note: This Meter is a precision instrument and should not be subjected to dropping as that would void the warranty.BATTERY REPLACEMENTThe Digital Static Field Meter operates from a standard 9 VDC alkaline battery. Battery life is in excess of 50 hours under normal use. When the battery voltage drops below 6.5 V, “BAT” will appear on the display. To change the battery, slide the battery cover down at the back of the Meter and remove the battery from the battery clip. Replace the battery with a fresh one and reinstall the battery cover. The battery should be removed from the Meter if its is to be stored for an extended period of time.Limited WarrantyDesco expressly warrants that for a period of one (1) year from the date of purchase Desco Ionization Test Kits will be free of defects in material (parts) and workmanship (labor). Within the warranty period, a credit for purchase of replacement Desco Ionization Test Kits, or, at Desco’s option, the Ionization Test Kit will be repaired or replaced free of charge. If product credit is issued, the amount will be calculated by multiplying the unused portion of the expected one year life times the original unit purchase price. Call our Customer Service Department at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for a Return Material Authorization (RMA) and proper shipping instructions and address. Please include a copy of your original packing slip, invoice, or other proof of date of purchase. Any unit under warranty should be shipped prepaid to the Desco factory. Warranty replacements will take approximately two weeks.If your unit is out of warranty, call our Customer Service Department at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for a Return Material Authorization (RMA) and proper shipping instructions and address. Desco will quote repair charges necessary to bring your unit up to factory standards.Warranty ExclusionsTHE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLYDISCLAIMED. The express warranty will not apply to defects or damage due to accidents, neglect, misuse, alterations, operator error, or failure to properly maintain, clean or repair products.Limit of LiabilityIn no event will Desco or any seller be responsible or liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, users shall determine the suitability of the product for their intended use, and users assume all risk and liability whatsoever in connection therewith.CHARGER Output1100 VDC nominal, < 5 μA max Output TerminalBanana / Acorn assembly Power Requirements One (1) 9V alkaline batteryOperating Conditions Temperature: 10-30°C Relative Humidity: 10-80%, non-condensing Dimensions4.5" L x 2.6" W x 1.1" H(114.3mm L x 66.0mm W x 27.9mm H)Weight (with battery)4.9 oz (153 g)CE CertifiedCONDUCTIVE PLATE Plate Capacitance 13 pF (± 2 pF)Range 0 to ± 2 kV Weight 2.4 oz (75 g)分销商库存信息: DESCO19493。
031-9134-001, 规格书,Datasheet 资料
DPXA - Single Shell DPXDPXA connectors are one-piece shell miniature rack/panel connectors. The construction offershigh strength and maximum utilization of insert area for contact arrangements accommodating up to 106contacts. Shells are keystone-shaped for polar-ization. Operating temperature for the DPXA is -54.2˚C to +125˚C (-67˚F to +257˚F).DPX B -P o l ar i z e d A RINC ShellDPX B connectors are DPXA connectors w ith an A RIN C B shelf. Additional polarization is pro v ided b y three hexagonal polarizing posts.DPX 2-Tw o G a ng DPX Se r ie sDPX2 connectors are the original two-gang versions ofthe DPX ,and are made of the same materials and accommodate the same contact arrangements. K eystone shaped shells accommodate t w o DPX inserts w ith up to 212 contacts. The DPX2 has three polarizing posts w ith 99 polarizing positions.DPX 2-A -A RINC A ShellDPX2-A connectors are DPX2 connectors w ith an A RIN C A shell. This shell type has the receptacle flange placed .344 (8.74)from the front of the engaging portion of the shell ,and short aluminum alloy polarizing posts permit polarization b efore contacts engage.DPX 3-T h r ee G a ng DPX Se r ie sDPX 3connectors are three-gang v ersions of the DPX ,made of the same materials ,and accommo-date the same contact arrangements. The three-gang v ersion can therefore accommodate up to a total of 318in the keystone shaped shells ,w iththree polarizing posts that are capa b le of pro v iding up to 99 polarizing positions.DPX 4-F o u r G a ng DPX Se r ie sDPX4 connectors are four gang v ersions of the DPX ,made of the same materials ,and can accommodate four separate arrangements that can total up to 424 contacts. The DPX4 has three polarizing posts w ith 99 polarizing positions.DPX *M A -L I TT LE C A E SA R 'Co n t a ct A ss e mb l y DPX *M A connectors are DPX connectors w ith the L I TT LE CA E SA R contact assem b ly for rear in-sertion ,release ,and extraction of crimp type con-tacts. I nsertion re q uires no tool ;extraction re q uires an expenda b le plastic tool. A hard dielectric ,closed-entry socket insert has lead-in chamfers for positi v e mating of contacts. Contacts are crimpa b le w ith the M 22501 tool.DPX *ME -E n v i ro n m en t a l w i t h L I TT LE C A E SA RCo n t a ct A ss e mb l yDPX *ME connectors are DPX M A connectors w ith en v ironmental interfacial and grommet seals ,and oli v e dra b shell finish.receptacle flange placed .060 (1.52) from the front of the engaging portion of the shell ,and polarizing posts permit polarization b efore the shells engage.DPX 2-B -A RINC B ShellDPX2-B connectors supersede the DPX2-A and ha v e an A RIN C B Shell. This Shell type has the DPXA-34DPX 2-34BDPX 3-34DPXA /DPX B /DPX 2Aluminum alloyCadmium plate w ith yello w chromate M elamine or Phenolic Copper alloy G old Solder Pot Die Cast Cadmium SteelCadmium Plate N /AM aterial Finish M aterial M aterial Finish TerminationM aterial Finish M aterial Finish M aterialShell I nsulator ContactsPolarizing Posts Scre w s &L ock w ashers SealsDPX *M A /DPX 2*M A /ME Aluminum alloyCadmium plate w ith yello w chromate for M A :oli v e dra b for ME Diallyl phthalate or epoxy Copper alloy G old Crimp Die cast Cadmium SteelCadmium plate SiliconeS p e c i f i c a t i o n s QQ -A-591/A 380QQ -P-416M I L -M -14QQ -C-533M I L -G -45204N /AQQ -P-416QQ S-630-637QQ -P-416N /ADPX B -33DPX 2-33BDPX 4-33ARINC 404DPXPerformance and Material Specifications (DPXA/DPXB/DPX*MA/DPX*ME)43DPXA/DPXBDPX2SERIES PREFIXSHELL STYLECLASSCONTACT ARRANGEMENTSHELL TYPECONTACT TYPEMODIFICATIONPOLARIZING POSITIONLESS CONTACTS*SERIES PREFIXTWO GANG SHELLCLASSCONTACT ARRANGEMENT(Side A)CONTACT TYPECONTACT ARRANGEMENT(Side B)CONTACT TYPESHELL TYPESHELL STYLEMODIFICATION NUMBERPOLARZING POSITIONLESS CONTACTS*DPXDPXDPXDPXDPX-34-33PS-1-0001- F032C267AB MA --00 01-03 01-02 01222PPPBABPPPMAMA-F0575757-33-33-34-57-57-57SERIES PREFIXDPX - ITT designationCONTACT ARRANGEMENT SHELL STYLEMODIFICATIONPOLARIZING POSITIONCONTACT TYPESHELL TYPE2t hru106(see p ages 52-56)N o designato r-o r igina l t w o-gang DPXA-AR I NC A s h e llB-AR I NC B s h e llS ee p ages 68-71S ee p ages 71-72SERIES PREFIXSHELLCLASSDPX - ITT C annon designation2-T w o gangN o designato r-S o l de r t y p eM A-Cr i m p t y p e w it h L ITT LE CA E SAR c onta c tP f o r p in;S f o r so ck et33f o r plu g;34f o r r e c e p ta c l e2t hru106(see p ages52-56)33f o r plu g;34f o r r e c e p ta c l eP f o r p in:S f o r so ck etDPX A-S ee p age 68-71DPX B-S ee p ages 68-71F o r DPX B s h e ll st y l e on l yA-S ing l e s h e llB-Po l a r i z ed AR I NC s h e llN o designato r-S o l de r t y p eM A-Cr i m p t y p e w it h L ITT LE CA E SAR c onta c tasse mb l yME - E n v i r on m enta l c r i m p t y p eM B-W i r e se p e r ato rMK - M o u nting s pr ingsSHELL STYLECLASSCONTACT ARRANGEMENTSHELL TYPECONTACT TYPEMODIFICATIONPOLARIZING POSTIONRoHSRR-R o H S c o m p ati b l eRoHS versionRoHSRRoHSR-R o H S c o m p ati b l eARINC 404 DPX How to Order44DPX3/DPX4SERIES PREFIX SHELL CLASSCONTACT ARRANGEMENT (Side A)CONTACT TYPECONTACT ARRANGEMENT (Side B)CONTACT TYPECONTACT ARRANGEMENT (Side C)CONTACT TYPECONTACT ARRANGEMENT (Side 0)CONTACT TYPE SHELL TYPEMODIFICATION NUMBER POLARIZING POSITION **CONTACT TYPEP for pin; S for socket. Designation follows each arrangement as ordered for 3 or 4gang versions.SHELL TYPE33 for pl u g; 34 for receptacle MODIFICATION See pages 68-71POLARIZING POSITION See pages 71-72DPX 3 ME - 57P -57P -57P -34-00 01DPX 4 ME - 57P-57P-57P-57P-34 - 00 01SERIES PREFIX DP X -I TT designation SHELL3-T hree gang 4 -F o u r gang CLASSMA -C rimp t y pe contacts in L I TT L E CAE S A Rcontact assem b l yME -E nvironment -resistant ,crimp t y pe contacts *CONTACT ARRANGEMENTSee pages 52-56for applica b le arrangements.Please specif y each arrangement n u m b er as in -dicated in ordering nomenclat u re for 3 or 4 gang if not listed b elow.How to Order45DPXA-33All tolerances +_.015(0.38) unless otherwise noted.NOTE - ARINC requires that DPXB shells are mounted with the polarizing posts at the top. See pages 71-72ARINC 404DPXSingle Gang46Dimensions shown in inch (mm)Specifications and dimensions subject to changeDPX2-33 ShellAll tolerance are +_.015 (0.38) unless otherwise noted.ARINC 404DPXTwo Gang47DPX2-33BDPX2-34BAll tolerances are +_.015(0.38) unless other wise noted.ARINC 404DPXTwo Gang - ARINC B Shell48ARINC 404DPX3/DPX4Two Gang - ARINC B Shell49Dimensions shown in inch (mm)Specifications and dimensions subject to changeDPX3-33DPX3-34All tolerances are +_.015(0.38) unless other wise noted.C2C78*10C3* B16C3* 172325C3*C2ContactArr.No. ofContacts&Wire sizeTestVoltageAC (RMS)C7810C3B16C3172325C3NOTE: See pages 59-60 for Coaxial/Power Contact Termination DataPI NContactT yp eCo d eRABCons u lt F actor yKABSame as Soc k et(U se C7)CAAZ1-8LlLJMAMBMCMKMZMAALLLKLCLALBLZLAAS O C KE TContactT yp eCo d eRCons u lt F actor yA CFGSame as PinSame as PinKSame as PinSame as PinSame as Pin1-8Same as PinSame as PinSame as PinSame as PinSame as PinSame as PinSame as PinSame as PinSame as PinSame as PinSame as PinSame as PinSame as PinSame as PinSame as PinContactN umb ers1-21-21-71-71-71-71-71-781-4,8-105,6,71-4,8-105,6,74-161-34-161-34-161-34-161-34-161-34-161-31-171-234-251-34-251-34-251-34-251-34-251-34-251-3No. ofContacts22437ContactN umb ers1-21-21,2,4,53,6,71-72221LFG4-251,3222(#20).3coax23#2017#2013#163coax7#203coax8#127coax2coax(R G-9/U)1000 (1-7)V1000 (1,2)Vmatc h e dimpe d ance2000V1500(4-16)V1000(1-3)V1500(1-4,8-10)V2000V1500(4-25)V.1000(1-3)V2000(15-23).1500(1-14)V.No. ofContacts22777777N73731331331331331331331723223223223223223223ContactsArr. No.C2C2CC2MC7C7AC7BC7BC7MC7XC7AA810C3A10C3B16C3C16C3G16C3J16C3Z E16C3ZF16C3172325C3F25C3G25C3J25C3Q25C3R25C3ARINC 404 DPX Contact Arrangement Variations Solder Type (Captive Contacts)50Dimensions shown in inch (mm) Specifications and dimensions subject to change26*30C43232C2*40*40C1*45*57*67*26Contact Arr.Contact Arr. No.Contact Numbers Contact NumbersNo. of ContactsPINSOCKET No. of ContactsNo. of Contacts &Wire Size Test Voltage AC (RMS)Contact Type Code Contact Type Code Same as Pin1-261,6 14-262-5, 7-1327-301,6 14-262-5, 7-1327-301,6 14-262-5, 7-1327-301,3,4,7-322,5,6Same as PinSame as PinSame as PinSame as PinSame as Pin Same as Pin Same as Pin Same as Pin Same as PinSame as PinSame as PinSame as Pin L F L F 1-39A11-30A1, A21-30A1, A21-30A1, A21-30A1, A21-30A1, A21-30A1, A21-30A1, A21-401-39A11-39A11-39A11-39A11-39A11-39A11-451-571-2,6-653-5L MLLL AL AA L Z L C L K L B L L AAL Z L B L A L K L M L M AL M AA L M Z M 26151141511415114293302302302302302302403913913913913913914545L40C1K40C1J40C1F40C1A40C140C140N32C2M32C2D32C2C32C2A32C232C232C30C4B30C4A30C4261500V26#1615 #20.11 #16,4coax3#1629 #2030 #202coax40 #2039 #201coax45 #2057 #2064 #203#161500 (2-5&7-13)V 1000 (1,6&14-26)V2000(1-6)1500(7-32)V1500(1-30)V 1000(A1, A2)V1500V 1500(1-39)V 1000(A1)V1500V 1500V 1000V576436757L C 302391Same as Pin Same as Pin Same as PinSame as PinSame as PinSame as Pin30C43232C24040C145 5767N OTE: See p a g es 59-60 f o r Coaxia l/Po w e r Con t ac t T e r mina t ion Da t a ARINC 404DPXContact Arrangement Variations Solder Type (Captive Contacts)51Dimensions shown in inch (mm)Specifications and dimensions subject to changeARINC 404 DPX*MA/ME Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series52Dimensions shown in inch (mm) Specifications and dimensions subject to change8D8W8**10A1010W3** B16W3** 25W3268D8W8**(For MA)AW8(For ME)10A1010W3**SOCKETONLYB16W325W326ContactArr.No. of Contacts&Wire SizeTest VoltageAC (RMS)ContactArr. No.No. ofContactsContactNumbersContact Size orCode Letter8#128D8W8C8AC8BC8CC8EC8GC8H10A1010W3A10C3B10C3B16W325W325A325B325D326268828827373731332232232232234121612coaxGFHRSABB2016420 H.D.coax20 H.D.AC20 H.D.AC16coax20coax20C20D20B161-81-45-81-81,23-101-3, 5,6, 8-104, 71-4, 8-105-74-161-34-251-31-261000V (1-8)V1500V1500V1500(1-4, 8-10)V1500 (4-16)1000 (1-3)Vsocket side only(Not avaiablein ME series)1500 (4-25)V,1000 (1-3)V(Not availablein ME series)1500V4#16, 4 #128coax2#8, 8 #208#16, 2 #47#20, H.D.,3coax13 #16, 3 coax22 (#20) 3 coax26 #16**Crimp rear release coaxial contacts.NOTE: See pages 62-65 for Coaxial Contact data See pages 57-58 for Crimp Contact data32W232W2**(For MA)A32W2(For ME)32W4**(For MA)A32W4(For ME)36W7**4040W1**(For MA)A40W1(For ME)4532W436W74040W145Contact Arr.No. of Contacts &Wire SizeTest Voltage AC (RMS)Contact Arr. No.No. of ContactsContact NumbersContact Size or Code Letter30 #20, 2 coax1500 (1-30),1000 (A1,A2)V1500 (1-28),1000 (29-32)V10001500V 1500 (1-39)1000 (A1)V1500V 24 #20 H.D.4#16, 4 coax29 #227coax (Size 5)40 #2039 #20,1coax45 #2032W232A232B232C2D32C232F232G232W432C4B32C4C32C4D32C4E32C4H32C44040W140B140F1F40C1453023023023023023023024244424442444244424442444244403913913913914520coax 20B 20A 20D 20J 20P 20C coax 20 H.D.16S 20 H. D.16H 20 H. D.16R 20 H. D.16G 20H.D.16AA 20 H. D.16AB 20 H. D.162020coax 20B 20P 20J201-30A1,A229-321-7, 10-2225-288, 9, 23, 241-401-39A11-45**Crimp rear release coaxial contacts.NOTE: See pages 62-65 for Coaxial Contact dataSee pages 57-58 for Crimp Contact dataARINC 404DPX*MA/MEContact Arrangement Variations, Crimp Type - DPX*MA/ME Series53Dimensions shown in inch (mm)Specifications and dimensions subject to changeARINC 404DPX*MA/MEContact Arrangement Variations, Crimp Type - DPX*MA/ME Series54Dimensions shown in inch (mm)Specifications and dimensions subject to changeNOTE: See pages 62-65 for Coaxial Contact dataSee pages 57-58 for Crimp Contact dataContact Arr.5757#201500V5757201-571-2,6-673, 4, 51-10620H.D.162264310667A1061500 (3-5)1000 (1, 2,6-67)V1000V64#20H.D.3#16106#22**Crimp rear release coaxial contacts .†A106arrangements h a v e t h e P OS-ALI NE connector design .See b elo w.NOTE: Engaging force of eac h la y o u t arrangement s h all not exceed 45l b s .maxim u m .F or h ig h densit y A106contact arrangementETI n t h e P OS-ALIG N connector constr u ction t h e entire pin contact is recessed in an indi v id u al ca v it y in t h e pl u g ins u lator wh ile t h e st u rd y soc k et mem b ers are exposed and extend from t h e connector receptacle face .T h ere is a lead-in c h amfer t h at g u ides t h e soc k et contact into t h e pin ca v it y ass u ring proper contact alignment d u ring mating and protecting t h e pin contact from damage and w ear .TO R67A 106†5767A 106†N o.o f Contact s &Wi r e SizeTes t V o l ta ge AC (RMS)Contact Arr. N o.N o.o f Contact sContact Size or Co de Le tt e rContact Numbe r s Positive Contact Alignment DesignThe crimp contacts are shipped with the connector,not installed. Additional contacts may be ordered using the part numbers listed below. All tools must2222Pin 030-1975-007031-1113-007030-9081-000031-9134-001030-9081-003031-9134-004030-9083-001031-9206-004030-1909-001031-1059-001030-1908-001031-1154-000030-2049-000031-1151-000030-1975-005031-1113-008030-2040-000031-1046-002030-1892-002031-1047-002030-1893-002031-9206-021030-2045-000031-1059-002030-1908-001031-1154-000030-2049-000031-1151-000Socket 22,24,26M22520/2-01M22520/2-23CIT-DPXMA-22M81969/1-01A10610,A32W2,40,A40W1,45,5710W3A32W4,67D8,A10,26,A32W4,67D810A10A10610,25W2,32W240,40W1,45,5710W332W4,67D8,A10,B16W3,26,32W4,678,D810A10CIET-20(274-7001-000)CIET-20M81969/1-02(980-0004-805)CIET-16(274-7002-000)CIET-12(274-7003-000)CET-8-2(323-7004-000)CET-4-8(323-7008-000)M22520/2-02Std. Locator Std. Locator M22520/2-08StandardM22520/1-02Std. Locator M22520/1-11CCH8-1 Head CCHP-8-6CCH4-1 Head CCHP-4-8M22520/2-01M22520/2-01M22520/1-01M22520/1-01MS-3191-1MS-3191-1MS-3191-1CBT-600*CBT600B*CBT-600*CBT600B*MS-3191-320,22,2420,22,2416,18,2012,1486PinSocket PinSocket PinSocket Pin Pin Pin Socket*Requires air line pressure of 80 to 100 psi.These DPXME contacts are being superseded in favor of military DPXNE/NA contacts, this applies to all existing DPXME connector assemblies, except for size 20 contacts.Socket Socket 20202020HD16161212080804064.310 (7.87).250 (6.35).135 (3.43).103 (2.62).071 (1.80).054 (1.37)6812141618202022242224266046231713-7.57.5-35-26046231713--7.5-3.05.0-2.03339636068-7583-68110-80812162022Crimp ContactsPart NumberContact Size Contact SizeWire Size Insulation (0.D.)Limits Inch (mm)Max.Test Current per MIL-C-39029Table VIMax. Current for Tests (Amps)(Mil-C-39029)DPX MA Commercial DPX ME Commercial Crimp Tool Part Number Locator Part Number Insertion/Extraction Tool (Part No.)Layout Usage DPX ME DPX MA Wire Accom.Type be purchased separately. The insertion/extraction tools listed are plastic type. Consult factory for more durable metal tools.Max. Potential Drop(Milli v olts)at 25Cper MIL-C-390291M22520/2-01ARINC 404DPX*MA/MEContact and Termination Tooling Data - Commercial55Dimensions shown in inch (mm)Specifications and dimensions subject to changeElectrical DataDPXMA (LIF) Crimp ContactsDPXMA Thermocouple ContactsContact Size and Part NumbersPart NumberSize Pin Socket MIL Spec ITT Cannon MIL Spec MIL Spec ITT Cannon Se-lec tor#Tool P/N Locator P/N ITT CannonInsertion Extraction Ins./Ext.AWG Insul Dia. Max.Strip Length Crimp ToolingInsertion/Extraction ToolingWire SizeContact Size and Part NumbersPart NumberSize Pin Socket MIL SpecITT CannonMIL SpecMIL SpecITT CannonSe-lec tor#Tool P/N Locator P/N ITT CannonInsertion Extraction Ins./Ext.AWG Insul Dia. Max.Strip LengthCrimp ToolingInsertion/Extraction ToolingWire SizeDPXA DPXB Two (2) pieces, solder pot.LITTLE CAESAR rear release contact retention assembly, crimp pot.LITTLE CAESAR assembly, solder pot,LITTLE CAESAR rear release contact retention assembly, crimp pot, with separator.Ring-Loc, solder pot,Environmental, connector.Two (2) pieces, solder pot (Standard 2pieces insert).Ring-Loc, solder pot. (See MS)(MAS) LITTLE CAESAR assembly,Solder pot.222030-2259-000030-2273-000030-2280-000030-2286-000031-1287-000M22520/2-01M225202-23M81969/1-01CIT-DPXMA-22-1Metal(070256-0000)CET-DPXMA-22Metal(070317-0000)(980-0004-804)Metal Tip 262422.054(1.37).130/.110(3.30/2.54).167/.147(4.24/3.73).270/.230(6.86/5.84).270/.230(6.86/5.84).071(1.80).103(2.62).135(3.43)22202018161412(980-0004-805)Metal Tip (980-0004-806)Metal Tip CIET-12Plastic (274-7003-000)CET-16-9Plastic (323-7001-000)CET-12-4Plastic (323-7002-000)----M81969/1-02M81969/1-03M81969/14-04995-0002-015995-0001-604995-0001-736995-0002-027M22520/2-08M22520/1-02M22520/1-11995-0001-584995-0001-584995-0001-585995-0001-5853346745678M22520/2-01M225201-01M225201-01031-1302-000031-1303-000031-1308-0002020HD 161612122222Alumel 030-1975-009031-1113-009M22520/2-01995-0001-584M22520/2-23995-0002-015(980-0004-804)Metal Tip .054(1.37).130/110(3.30/2.54)262422M81969/1-01CIT-DPXMA-22-1Metal(070256-0000)CET-DPXMA-22Metal(070317-0000)334031-1113-010030-1975-0102222Chromel(MA) LITTLE CAESAR assembly,crimp pot, (Cat. A)Metal plates.Rear release,crimp (MB type only).Standard 2pieces, solder pot,both sides,Ex: DPX2-57S57S-33-0001Standard LITTLE CAESAR asembly,crimp pot both sides Ring-loc coax.EX:DPX2MA-57S57S-33-0001LITTLE CAESAR assembly, soler po,both sides Ring-Loc coax.EX: DPX2MAS-57S57S-33-001Ring-Loc, solder pot. Layout 25C3pin only and 40C1 Pin and socket.EX: DPX2MS-40W1S40W1S-33-0001A side: (MAS) LITTLE CAESAR assembly, solder pot (32W2S)B side; Standard 2 Piece, solder pot (57S).Ex: DPX2CA-32W2S57S-33-0001A side: Standard solder pot.B side: Rear release crimp with separator.Ex: DPX2AF-13S26S-33B-0001A side: Ring-Loc solder pot (40W1S).B Side: 2 Piece, Solder Pot (57S).Ex: DPX2BA-40W1S57S-33-0001A side: (MA) LITTLE CAESAR assembly, Crimp (67S).B Side: 2 Piece, solder pot (57S).Ex: DPX3DA-67S57S-33-0001A side: Metal plates for grounding (Coaxes).B side: Ring-Loc, solder pot.Ex: DPX2EB-C1P40W1P-34B-0001DPXAMA DPXBMA *NOTE: When any two of these letters are used in combination, the inserts ("A" and "B") side have the style contacts indicated(see table opposite for examples).-------------------Class None D *DPX 2CA-/DPX 2AC-(R e v erse CA)DPX 2AFDPX 2B A DPX 2DA DPX 2E B E *F *DPX 2-DPX 2MA DPX 2MAS DPX 2MS-MA MAS M BMS ME A *B*C *Series DPX Insert T y peClass Series DPX Insert T y peClass Series DPX Insert T y peARINC 404DPX*MA/MEDescription of Modification Codes for Special Connector Insert Assemblies56Dimensions shown in inch (mm)Specifications and dimensions subject to changeContact and Termination Tooling DataARINC 404 DPX Solder Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.)*These coaxial contacts are supplied with the connector.Dimensions shown in inch (mm)Specifications and dimensions subject to change57ARINC 404 DPX Solder Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.)58Dimensions shown in inch (mm) Specifications and dimensions subject to changeARINC 404DPX SolderCoaxial Cable Assembly59Dimensions shown in inch (mm)Specifications and dimensions subject to changeITT Cannon recommends resistance soldering for all solder contacts, particularly for RF cable where excessive heat will damage the dielectric. Wiresthrough holes in sleeve.4.S older sleeve to coaxial body.should be pre -tinned. B ushing, endbells, and j unc -tion shells (where applicabe )must be slipped over wire bundles before soldering is started. Consultfactory for types not shown. The mechanical steps in wiring coaxials described below.NOTES:*P for pin; S for socket.1. The "X "dimension is take from the rear of the shell.2. Codes G and S are inactive for new design. Use codes AD and AE.3. Code AA is designed for installations that have limited space in the terminal area. Use code AG for standard installations.ARINC 404DPX*MA CrimpCoaxial Contacts60Specifications and dimensions subject to changeARINC 404 DPX*MA Crimp Coaxial Contacts61ARINC 404 DPX*ME Crimp DPX*MA/ME Coaxial Contact Data (for environmental requirements)62Dimensions shown in inch (mm) Specifications and dimensions subject to changePIN surface of the connector should not be less then 2.000 (50.80).DPX*MA/ME Coaxial Contact Data (for environmental requirements)Components/AccessoriesCable Trim Dimensions ArrayA. Push ferrule under braid as far as it will go. Trim off braid extending beyondshoulder of ferrule, if necessary.B. While holding ferrule in place pull crimp sleeve forward over braid until it istight against shoulder an ferrule. Pull firmly against face of ferrule to makesure it is up tight.C. Trim dielectric to the .035 (0.89)/.030 (0.76)dimension.63Coaxial Cable Assembly Recommendations64Dimensions shown in inch (mm)Specifications and dimensions subject to changeLITTLE CAESAR Contact Assembly Data For Codes G, H and RFor Codes F, S and T1.Strip and trim cable as shown on page 60.2.Solder inner conductor to coaxial contact with crimp ring over braid and rear insulator over inner conductor.3.Insert cable into coaxial with shell under braid. Crimp ring with Cannon crimp tool CA58073.1.Strip and trim cable as shown on page 60.2.Solder inner connector to coaxial contact with crimp ring pushed back on cable.3.Insert cable into coaxial and pull ring forward over braid. Crimp ring with Cannon crimp tool CA58073-0001 or CCT-408M. After crimping, crimp ring must not exceed .252 (6.40) diameter.1. Strip and trim cable as shown on page 60.2. Slide crimp ring over braid and jacket of cable.3. Unbraid exposed portion of braid and fold braid wires backward over outside of crimp ring.4. Insert prepared wire into right angle fitting of shell assembly. Conductor should be aligned in slot of the center contact. Crimp with Cannon tool CCT/C10.5.Solder center conductor of cable to contact. Insert cap and solder in place.For Codes UCoaxial Cable Assembly Recommendations (Continued) For Code VDimensions shown in inch (mm)Specifications and dimensions subject to change65DPXA Modifications Codes-4. Mounting holes .120 (3.05) dia. c'sink 100˚ to .225 (5.72) dia.-5. 4-40 clinch nuts.-6. Removable insert retainer plate.-7. Mounting holes .120 (3.05) dia. c'sink 82 to .230 (5.84) dia.-12. Mounting holes .132 (3.35)/.125 (3.18).-16. A106 insert with separator.-17. With grommet and mounting holes .120 (3.05) dia. countersunk 100˚ to .225 (5.72) dia.-70. Standard mounting with (LIF) contacts.-77. Same as -7 except with low insertion force (LIF) contacts (for LIF contact data).Applicable for all MA ,M E,N A &N E Series C onnectors.Applicable to N E Series also.11Modifications Codes66Dimensions shown in inch (mm)Specifications and dimensions subject to changeApplicable for all MA, ME, NA & NE Series Connectors.1Modifications Codes67Dimensions shown in inch (mm)Specifications and dimensions subject to change)**I ndicates polarizing position.(S ee page 72)A pplicable for all MA, ME, NA and NE S eries C onnectors.12Modifications Codes68Dimensions shown in inch (mm) Specifications and dimensions subject to changeModifications CodesDimensions shown in inch (mm)Specifications and dimensions subject to change69Dark areas represent post010203040506070809101112131415161718192021222324252627282930313233343536373839404142434445464748495001020304050607080910111213141501020304050607080910111213141545623452444443333423232322211611111222165321632333445213232301020304050607080910111213141516171819202122232425262728293031323334353637383940414243444546474849504444445555556666661111112222223333334444445555556644444444444444444444444444444444444433333333333333432165432165432165432165432165432165432165432165436666111111222222333333444444555555666666111111222333333333333333333333322222222222222222222222222221654321654321654321654321654321654321654321654325152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989951525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899123456123456123456123456123456123456123456123456121111111111111111111111111111111111112222222222222211111166666655555544444433333322222211111166666655345612345612345612345612345612345612345612345612322222222222222222222223333333333333333333333333335555444444333333222222111111666666555555444444333The last two digits in the DPX nomenclature (ex: DPXB-8-33B-0014) refer to the polarizing post position. When the last two digits are omitted it means the polarizing posts will not be assembled and position number is not stamped on the connector. This allows the customer to position the posts themselves and then stamp the appropriate number on the shell. If the last two digits are made 00 it means the polarizing posts are deleted.PositionsTwo Post TypePositionPositionLeft PostLeft PostCenter PostRight PostPositionLeft PostCenter PostRight PostPositionLeft PostCenter PostRight PostPositionLeft PostCenter PostRight PostRight PostPositionLeft PostRight PostPositionLeft PostRight PostPositionLeft PostRight PostThree Post TypePLUG SHELL33 PLUG MALE SHELLRECEPTACLE SHELL34RECEPTACLE FEMALE SHELLPolarization70Dimensions shown in inch (mm)Specifications and dimensions subject to change。
742841210;中文规格书,Datasheet资料
3.1 3.0 2.02012-06-272012-03-292009-08-13SStSStSMuSStSMu-Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:Test Equipment: E4991A or equivalentF Typical Impedance Characteristics:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-CBF HFof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the ferrite body and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the ferrite body and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the plating. The washing varnish agent could have a negative effect on the long term function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the ferrite body could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.• Wave soldering is only allowed after evaluation and approval.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 742841210。
B32-1640;中文规格书,Datasheet资料
5.5±0.1 2 2.8 6±0.1 dia. 10±0.4 2.5
Panel 4 1.0 to 2.0 Panel
6.5+0.05 0
1.8 2.5
PC board 8.85±0.4
PC board
B32-2100 B32-2110
R0.2
Reference Dimensions
1.0 to 2.0
Mount the Key Top on to the Switch after soldering, otherwise the Key Top may be deformed by the soldering heat.
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms.
0430610022;中文规格书,Datasheet资料
This document was generated on 08/16/2012
PLEASE CHECK FOR LATEST PART INFORMATION
Part Number: Status: Overview: Description: Documents: 3D Model Drawing (PDF)
Packaging Specification Sales Drawing PK-43061-001 SD-43061
This document was generated on 08/16/2012
PLEASE CHECK FOR LATEST PART INFORMATION
Search Parts in this Series 43061Series Mates With 3.96mm Pitch KK® or SPOX® headers Use With Spox Terminal 5194 , 5225
Material Info Reference - Drawing Numbers
43061-0022 Active
SPOX™ 3.96mm Pitch SPOX™ Housinpecification PK-43061-001 (PDF) RoHS Certificate of Compliance (PDF) Series LR19980 E29179 image - Reference only EU RoHS ELV and RoHS Compliant REACH SVHC Contains SVHC: No Low-Halogen Status Not Reviewed China RoHS
Need more information on product environmental compliance? Email productcompliance@ For a multiple part number RoHS Certificate of Compliance, click here Please visit the Contact Us section for any non-product compliance questions.
0432028824;中文规格书,Datasheet资料
This document was generated on 09/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:43202-8824Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Right Angle, Low Profile, Shielded, No Panel Grounding Tabs, without Bottom Grounding Tab, Rear Position PCB Ground Tab, 8/8Documents:3D ModelProduct Specification PS-43202-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE107635GeneralProduct Family Modular Jacks/Plugs Series43202Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ45UPC800756072784PhysicalColor - ResinBlack Durability (mating cycles max)500Flammability94V-0Inverted / Top Latch NoJack Height11.81mm Lightpipes/LEDs NoneMaterial - MetalBrass, Phosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin High Temperature Thermoplastic Orientation Right Angle (Side Entry)PCB RetentionYes PCB Thickness - Recommended 1.60mm Packaging TypeTray Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Plating min - Mating1.270µm Plating min - Termination2.540µm Ports1Positions / Loaded Contacts8/8Surface Mount Compatible (SMC)YesTemperature Range - Operating -40°C to +85°C Termination Interface: Style Through Hole Wire/Cable TypeN/A ElectricalCurrent - Maximum per Contact 1.5A Grounding to PCB Yes Grounding to Panel None ShieldedYesSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 43202Series Mates With FCC 68 PlugsVoltage - Maximum125VSolder Process DataLead-free Process Capability Wave Capable (TH only)Material InfoReference - Drawing NumbersProduct Specification PS-43202-001, RPS-43202-002Sales Drawing SDA-43202This document was generated on 09/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0432028824。
FM-4;FM-3;中文规格书,Datasheet资料
PRINT AC TYPEA RELEASED FOR PRODUCTION, SEE ECN #1206SK 08/11/0630.01~50=±0.5TOLERANCES UNLESS NOTED 0~10=±0.110.01~30=±0.3ANG.=±1°B SEE CO 200074SK 11/30/07C SEE CO 200399SK 07/29/09D ADDED FM-8 / -9, SEE CO 200544SK 06.23.1010.3.40A ASTYLE 32.3.09CC2.4.09BB8.31SEE TABLERE:FILE #:SHEET:REV.DESCRIPTIONENGR.DATETITLE:PART #DWN:DT:SHEET SIZE:RICHCO, INC.1 OF 1FM-X BFAN MOUNTAPP:CHKD:RICHCO, INC.(773) 539-4060ENG@08/11/06SK SJSK FINALDWG IN mm [IN]CREATED USING SOLIDWORKSPANEL FAN MOUNTFANSECTION B-B"C""D""A"6.25.25"B"STYLE 1STYLE 28.32TO PULL THROUGH A Ø5±1 [.197±.039] HOLE,WITH MAXIMUM 1.4 [.055] PANEL AND 2 [.079] FAN THICKNESS10.3.40SECTION D-D"D""C"NOTES:1. ALTERNATE UNITS FOR REFERENCE ONLYWITH 5.4 [.213] MAXIMUM TOTAL THICKNESSTO PULL THROUGH A Ø5±1 [.197±.039] HOLE, WITH MAXIMUM 1.4 [.055] PANEL AND 3.1[.122] FAN THICKNESS TO PULL THROUGH A Ø5±1[.197±.039] HOLE,WITH MAXIMUM 3 [.118] PANEL AND 15 [.591] FAN THICKNESS.FM-6: TO PULL THROUGH A Ø4.3±0.2 [.161±.008] HOLE,WITH MAXIMUM 0.8 [.031] PANEL AND 20±0.5 [.787] FAN THICKNESS.FM-5: TO PULL THROUGH A Ø3.5±1[.138±.039] HOLE,WITH MAXIMUM 0.8 [.031] PANEL AND 25-28 [.98-1.10] FAN THICKNESS.STYLE 4FM-7: TO PULL THROUGH A Ø3.5±1 [.138±.039] HOLE,PART NO.MATERIALCOLOR DIM. "A"DIM. "B"DIM. "C"DIM. "D"STYLE NO.FM-1EPDM RUBBER, 30 SHORE A (RMS-166)BLACK1.3 [.05]1.5 [.06]1.9 [.07]32.3 [1.27]1FM-2EPDM RUBBER, 40 SHORE A (RMS-180)FM-3EPDM RUBBER, 30 SHORE A (RMS-166) 3 [.12 ]22.2 [.88]2FM-4EPDM RUBBER, 40 SHORE A (RMS-180)FM-5SILICONE RUBBER, 40 SHORE A (RMS-316) 0.7 [.03]18.5 [.73 ]56 [2.20]3FM-6SILICONE RUBBER, 40 SHORE A (RMS-316) 2.5 [.10] 2 [.08] 14 [.55]53.8 [2.12]FM-7SILICONE RUBBER, 40 SHORE A (RMS-316) 0.7 [.03] 1.5 [.06]24 [.94]73 [2.87]FM-8EPDM RUBBER, 30 SHORE A (RMS-166)N/AN/A4.3[.17]21[.83]4FM-9EPDM RUBBER, 40 SHORE A (RMS-180)SECTION C-C"D""B""A""C"2.4.09DDSECTION A-A"B""D""A""C"/分销商库存信息:RICHCO-INCFM-4FM-3。
0460121142;中文规格书,Datasheet资料
This document was generated on 08/08/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:46012-1142Status:ActiveOverview:Mini-Fit® Plus HCSDescription:Mini-Fit® Plus HCS Crimp Terminal, 18-20 AWG, Bag, Tin (Sn) PlatingDocuments:Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-45750-001 (PDF)GeneralProduct Family Crimp Terminals Series46012Application PowerCommentsCurrent = 13A max. per circuit when header is mated to a receptacle loaded with 45750 series terminals crimped to 16 AWG wire. . See Molex productspecification PS-45750-001 for additional current de-rating information.Crimp Quality Equipment YesOverviewMini-Fit® Plus HCS Product Name Mini-Fit® Plus HCS UPC822350570442PhysicalDurability (mating cycles max)30GenderMale Material - MetalCopper Material - Plating MatingTin Material - Plating Termination Tin Net Weight0.145/g Packaging Type BagPlating min - Mating2.540µm Plating min - Termination 2.540µmTermination Interface: Style Crimp or Compression Wire Insulation Diameter 1.65-2.95mm Wire Size AWG 18, 20Wire Size mm²N/A ElectricalCurrent - Maximum per Contact 13A Voltage - Maximum600VMaterial InfoReference - Drawing NumbersProduct Specification PS-45750-001Sales DrawingSD-46012-001Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 46012SeriesUse With5559 Mini-Fit Jr.™ Plugs, 42475 Mini-Fit®MBI Panel Mount Plugs, 30068 Mini-Fit®TPA PlugsApplication Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #Extraction Tool 0011030044Hand Crimp Tool for Male and Female Crimp Terminals,16-24 AWG Wire0638190900This document was generated on 08/08/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0460121142。
SQT-103-01-F-D;SQT-106-01-LM-D;SQT-110-03-F-D;SQT-120-01-F-S;中文规格书,Datasheet资料
SPECIFICATIONS
For complete specifications see ?SQT
Mates with: TMMH, TMM, MTMM, MMT, TW, LTMM, ZLTMM, ESQT, TCMD
Choice of one through six rows
SQT-106-01-LM-D SQT-112-01-F-D SQT-110-01-L-Q
SQT-110-03-F-D SQT-107-01-L-T SQT-125-01-F-D
(2,29) .050 .090
(2,00) .0787
–RA OPTION
(–Q, –5 & –6 not available)
/
分销商库存信息:
SAMTEC SQT-103-01-F-D SQT-120-01-F-S SQT-110-01-LM-Q SQT-116-01-S-D
TMM/ SQT TMMH
HORIZONTAL
(2,00mm) .0787" pitch
1
NO. PINS PER ROW
LEAD STYLE
(6,35mm) .250"
PLATING OPTION
ROW OPTION
Note: Some lengths, styles and options are non-standard, non-returnable.
20°C
5.5A
(2,62mm) .103" to (5,03mm) .198" Insertion Force: (Single contact only)
40°C
5A
60°C
0190030109;中文规格书,Datasheet资料
This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:19003-0109Status:ActiveDescription:InsulKrimp™ Female Quick Disconnect, for 18-22 AWG WireDocuments:Drawing (PDF)Product Specification PS-19902-011 (PDF)Product Specification PS-19902-008 (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationULE79133GeneralProduct Family Quick Disconnects Series19003CommentsFunnel Entry Crimp Quality Equipment YesProduct Name InsulKrimp™Type Quick Disconnect UPC800753129054PhysicalBarrel Type Closed Color - Resin Natural Flammability 94V-2GenderFemale Glow-Wire Compliant NoInsulationNylon (PA)Lock to Mating Part None Material - MetalBrass Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight 0.694/g OrientationStraight Packaging Type Reel Plating min - Mating4.064µm Plating min - Termination 4.064µm Polarized to Mating Part NoTab Thickness 0.51mm Tab Width5.21mmTemperature Range - Operating -65°C to +105°CTermination Interface: Style Crimp or Compression Wire Insulation Diameter 3.43mm max.Wire Size AWG 18, 20, 22Wire Size mm²0.35 - 0.80ElectricalVoltage - Maximum600V Material InfoOld Part NumberAA-2213CReference - Drawing NumbersProduct Specification PS-19902-008, PS-19902-011Sales DrawingSD-19003-005Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 19003SeriesApplication Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #ASP Perishable Tool Kit used in ASP presses that process continuous molded product 0190280104Mini-Mac™Applicator0638837000This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0190030109。
742730023;中文规格书,Datasheet资料
8.1 8.0 7.02012-06-272012-04-042007-04-10SStSStSMuSStSMu-Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]C Schematic:F Typical Impedance Characteristics: F Derating Curve:F Layout examples:H4: Classification Wave Soldering Profile:H5: Classification Wave ProfileProfile FeaturePreheat- Temperature Min (T smin )- Temperature Typical (T stypical ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Δ preheat to max Temperature Peak temperature (T p )Time of actual peak temperature (t p )Ramp-down rate - Min - Typical - MaxTime 25°C to 25°C Pb-Free Assembly 100°C 120°C 130°C 70 seconds 150°C max.250°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesSn-Pb Assembly 100°C 120°C 130°C 70 seconds 150°C max.235°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesrefer to EN 61760-1:2006H Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-MLSof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the ferrite body and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the ferrite body and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the plating. The washing varnish agent could have a negative effect on the long term function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the ferrite body could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.• Wave soldering is only allowed after evaluation and approval.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 742730023。
22-16-2090;中文规格书,Datasheet资料
Assy Proc: Hooks Cut: Housing No: Terminal No: Dim C: Plating: Packaging: Voids: Material No
22-14-2024 22-14-2034 22-14-2044 22-14-2054 22-14-2064 22-14-2074 22-14-2084 22-14-2094 22-14-2104 22-14-2114 22-14-2124 22-14-2134 22-14-2144 22-14-2154 22-14-2164 22-14-2174 22-14-2184 22-14-2194 22-14-2204 22-14-2214 22-14-2224 22-14-2234 22-14-2244 22-14-2254
/
KK 100 PCB ASSY 2-25 CKT
4455 SERIES
A-4455- *
ASSY PROCEDURE A=RIGHT ANGLE B=BOTTOM ENTRY C=TOP ENTRY
STANDARD PRODUCT
*
N
*
*-*
HOUSING TYPE A=4455-AN B=4455-BN E=4455-NHH H=4455-N2 P=4455-NR (HOOKS CUT OFF) R=4455-NR W=4455-N-2 (HOOKS CUT OFF) Y=4455-N (HOOKS CUT OFF) Z=4455-N NO OF CIRCUITS TERMINAL TYPE Code A B C D F G J L M T Number 4316-4 6516-4 6516-5C 4316-3B 6516-6C 4316-3 6516-3B 6516-3C 6516-4A 4316-4A Material Brass Phos Bronze Phos Bronze Brass Phos Bronze Brass Phos Bronze Phos Bronze Phos Bronze Brass Form Standard Standard Cat Ear / V Std / V Cat Ear / V Standard Std / V Cat Ear / V Cat Ear Cat Ear VOID LOCATION NUMBER = CIRCUIT VOIDED MULTIPLE VOIDS START WITH 51 BLANK = NONE
0482006031;中文规格书,Datasheet资料
This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:48200-6031Status:ActiveOverview:Edge Card ConnectorsDescription:1.27mm Pitch Compact PCI Slot, Board-to-Board Edge Card Connector, Vertical,Double-Sided, Dual Read-Out, White, with Plastic Peg, Two End Cuts, 0.25µm Gold (Au) Plating, 120 Circuits, Lead-FreeDocuments:3D ModelTest Summary TS-48200-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-48200-001 (PDF)GeneralProduct Family Edge Card Connectors Series48200CommentsWith Two End Cuts Component Type Edgecard to PCBOverviewEdge Card Connectors Product Name Edge Card UPC822350026659Physical(p)ower-(s)ignal Configuration 120s - 0p Circuits (Loaded)120Circuits (maximum)120Durability (mating cycles max)50Entry AngleVertical (Top Entry)Keying to Mating Part Yes Material - Plating MatingGold Material - Plating Termination TinNet Weight 14.925/g PC Tail Length 3.00mm PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 1.60mm Packaging TypeTray Pitch - Mating Interface 1.27mm Plating min - Mating 0.254µm Polarized to Mating PartYesTemperature Range - Operating -10°C to +85°C Termination Interface: StyleThrough Hole ElectricalCurrent - Maximum per Contact 1A Voltage - Maximum30VSolder Process DataLead-free Process Capability Wave Capable (TH only)Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-48200-001Sales Drawing SD-48200-003Test SummaryTS-48200-001Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 48200Series Mates With 32-bit PCI cardThis document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0482006031。
0945180101;中文规格书,Datasheet资料
Material Info Reference - Drawing Numbers
Product Specification Sales Drawing PS-94518-006 SD-94518-005 Search Parts Байду номын сангаасn this Series 94518Series Application Tooling | FAQ Tooling specifications and manuals are found by selecting the products below. Crimp Height Specifications are then contained in the Application Tooling Specification document. Global Description Product # FineAdjust™ 0639019700 Applicator for RAST5 Normal Force Female Crimp Terminal Extraction Tool 0638132700
This document was generated on 08/13/2012
PLEASE CHECK FOR LATEST PART INFORMATION
分销商库存信息:
MOLEX 0945180101
Need more information on product environmental compliance? Email productcompliance@ For a multiple part number RoHS Certificate of Compliance, click here Please visit the Contact Us section for any non-product compliance questions.
0424109130;中文规格书,Datasheet资料
This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42410-9130Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Vertical, 8/4, KeyedDocuments:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42410 (PDF)GeneralProduct Family Modular Jacks/Plugs Series42410Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ45UPC800753821149PhysicalBoot Color N/A Color - ResinBlack Durability (mating cycles max)500Inverted / Top Latch N/AJack Height16.38mm Keying to Mating Part Yes Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin PolyesterOrientation Vertical (Top Entry)PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 3.18mm Packaging Type TrayPanel MountWith Flange Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Ports1Positions / Loaded Contacts8/4Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +85°C Termination Interface: Style Through Hole Waterproof / Dustproof No Wire/Cable TypeN/AElectricalCurrent - Maximum per Contact 1.5A Grounding to PCB No Grounding to Panel None ShieldedNoVoltage - Maximum150V AC (RMS)Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42410SeriesSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C235Material InfoReference - Drawing NumbersProduct Specification PS-42410Test Summary TS-42878-001This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0424109130。