BR-HE033-12V中文资料
KELSEY LED 3.25英寸平行线灯商品说明书
CONSTRUCTIONHeavy gauge square extruded aluminum housing. ¼” thick precision-machined aluminum end-caps. Extruded acrylic lenses specifically engineered to maximize the performance and transmission from a variety of light sources.LED LIGHT OUTPUT SYSTEM■HLO (High Lumen Output) & SLO (Standard Lumen Output) providing efficient illumination.■CLO (Custom Lumen Output) User specified lumen output & wattage. Consult factory for details.■Rated life of L70 > 60,000 hours based on LED testing per LM-80-08 and projected values using IESNA TM21-11DIMMING■0-10V Dimming 1%■eldoLED 0-10V 0.1% or 1%■Lutron ® LTEA2W Hi-Lume 2-Wire 1% ■Lutron ® LDE1 Hi-Lume EcoSystem 1% ■DALI Dimming 1%LENS■Impact resistant co-extruded lens with highly reflective internal cavity■(HE) High Efficiency lens provides optimal performance with even and continuous diffusion■(FBLSS) Flat Blade Louver Semi-Specular with diffusing layerPERFORMANCE OPTICS(BW) Batwing, (AS) 15° Asymmetric, and (E70) 70° Elliptical.FIXTURE LENGTH■Nominal Lengths: 2’, 3', 4’, 6', and 8’■Continuous run & mitered angles available. Consult factory for lead times.INTELLECT ENABLED (OPTIONAL CONTROLS)Intellect-embedded fixtures integrate wireless dimming, occupancy / vacancy sensing, multi-zone daylight harvesting, manual control, and scene control.MOUNTING■(CSS) Cable Suspension System field-adjustable 1⁄16” aircraft cable or (CSS-R) Cable Suspension Rotational System■Standard matte white, flat black or matte silver 5" canopy with 36" field adjustable aircraft cable. Consult factory for longer lengths■Power cord is color matched to canopy finish. Consult factory for additional canopy options and cable lengths FINISHESAvailable finishes includes powder coated Matte White (MW), Flat Black (FB), and Matte Aluminum (MA). Consult factory for custom powder coat finishes.LISTING / WARRANTY ■5-Year Limited Warranty■UL Listed to US and Canadian standards■Can be used to comply with 2016 Title 24, Part 6, JA8 high efficacy LED light source requirements 111: Model2: Light Output 3: CCT / CRI 4: Nominal Length 5: Finish 6: Lens KEL-LED-325(3.25")-SLO -HLO -CLO2(StandardLumen Output)(High LumenOutput)(Custom LumenOutput)-279-30-309-35-359-40-409(2700K / 90CRI)(3000K / 80CRI)(3000K / 90CRI)(3500K / 80CRI)(3500K / 90CRI)(4000K / 80CRI)(4000K / 90CRI)-2-3-4-6-8-CR_3-MTR-R4(2ft)(3ft)(4ft)(6ft)(8ft)(Continuous Run)(Miter Run)-MW -FB -MA -CUP5(Matte White, Powder Coat)(Flat Black, Powder Coat)(Matte Aluminum, Powder Coat)(Custom Powder Coat)-FW -HE -RLW -BW -AS -E70-FBLSS(Frosted White)(High Efficiency)(Reveal Frosted White 3/8 Extended)(Batwing 115°)(Asymmetric 15°)(Elliptical 70°)(Flat Blade Louver Semi-Specular)ORDERING CODE: (Example: KEL-LED-325-SLO-30-2-MW-FW-120-D1-CSS-DR-36MW )1234567891011Options in green qualify for the 10 day shipping program. Refer to the 10 day shipping guide for more details.7: Voltage 8: Driver 9: CSS Mounting Options 10: Canopy/Cable Length 11: Options-120-277-3472(120V)(277V)(347V)-D1-ED10V1-ED10V01-HLA26-HL -DALI(0-10V Dimming 1%)(eldoLED 0-10V 1%)(eldoLED 0-10V 0.1%)(LTEA2W Lutron Hi-Lume 2-Wire 1%)(LDE1 Lutron Hi-Lume Ecosystem 1%)(DALI Dimming 1%)-CSS-DR -CSS-IN -CSS-R -CSS-R2-CSS-R3(CSS Direct)(CSS Indirect)(CSS-R w/ 1.25"Knuckle)(CSS-R w/ 2.25"Knuckle)(CSS-R w/ 3.25"Knuckle)-36MW -36FB -36MS -CU 5(5" Round Matte White Canopy, 36" Aircraft Cable)(5" Round Flat Black Canopy, 36" Aircraft Cable)(5" Round Matte Silver Canopy, 36" Aircraft Cable)(Custom Length, Consult Factory)-EM5-IEPH1(Emergency Battery Pack)(Leviton IntellectEmbedded Integral Sensor & Power Pack)Notes1. -D1 (0-10V 1%) only. Excludes 80CRI, Remote Driver and Continuous Runs2. Consult factory, available with D1 options only3. Specify length in "feet"4. See miter worksheet for specification (detailed drawing required)5. Consult factory6. Lutron HLA2, 120V onlyDIMENSIONS:Frosted WhiteBeam: 105°Elliptical (E70)Beam: 70°High Efficiency (HE)Beam: 105°Batwing (BW)Beam: 125°Asymmetric (AS)Beam: 15°DIMENSIONS:Standard Nominal Length: 2, 3, 4, 6, or 8-foot (Consult factory for custom lengths)STANDARD CABLE SUSPENDED SYSTEM 1.25" CABLE SUSPENDED ROTATIONAL SYSTEM 2.25" CABLE SUSPENDED ROTATIONAL SYSTEM 3.25" CABLE SUSPENDED ROTATIONAL SYSTEMDIMENSIONS:NOMINAL DELIVERED LUMEN DATAFrosted WhiteEfficacy: up to 95lm/WBeam: 105°Standard: 2, 3, 4, 6, or 8-foot (Consult factory for custom lengths)STANDARD CABLE SUSPENDED SYSTEM 1.25" CABLE SUSPENDED ROTATIONAL SYSTEM。
乐珀尔蓄电池合格证模板
乐珀尔蓄电池合格证模板
摘要：
1.乐珀尔蓄电池概述
2.乐珀尔蓄电池的参数及规格
3.乐珀尔蓄电池的标准
4.乐珀尔蓄电池的优点
5.乐珀尔蓄电池的合格证模板
正文：
乐珀尔蓄电池是一种高品质的蓄电池产品，其采用了独特的多元合金配方，并利用高性能设备和严格的温度控制技术，使得其板栅不仅厚度、重量均匀性好，而且耐腐蚀性强，浮充寿命长。
乐珀尔蓄电池的参数及规格如下：电池型号为6-gfm-38，电压为12V，电流为38A，容量为38Ah。
这款蓄电池的板栅采用了多元合金配方，使得其具有良好的耐腐蚀性和较长的浮充寿命。
乐珀尔蓄电池符合多项标准，包括JIS C 8707-1992 阴极吸收式密封固定型铅酸蓄电池标准、JB/T 8451-96中华人民共和国机械行业标准以及YD/T 799-2006 通信电源设备抗地震检测规范等。
乐珀尔蓄电池的优点主要体现在其独特的多元合金配方、严格的温度控制以及良好的耐腐蚀性和浮充寿命。
这些优点使得乐珀尔蓄电池在众多蓄电池产品中脱颖而出，成为了消费者的首选。
乐珀尔蓄电池的合格证模板如下：
【乐珀尔蓄电池合格证】
电池型号：6-gfm-38
电压：12V
电流：38A
容量：38Ah
项目| 规格| 测试结果
--- | --- | ---
电压| 12V | 12.05V
电流| 38A | 38.5A
容量| 38Ah | 38.5Ah
浮充电压| 14.1V | 14.15V
充电时间| 6 小时| 5 小时45 分钟
放电时间| 3 小时| 3 小时15 分钟
结论：根据测试结果，该批乐珀尔蓄电池符合相关标准，质量合格。
PCS-9662辅助装置技术说明书(20141202)
南京南瑞继保电气有限公司
iii
PCS-9662 辅助装置
目录
前言 .......................................................................................................................................i 目录 .....................................................................................................................................iv 第 1 章 概述........................................................................................................................1
危险!
意味着如果安全预防措施被忽视，则会导致人员死亡, 严重的人身伤害，或严重的设备 损坏。
警告!
意味着如果安全预防措施被忽视，则可能导致人员死亡, 严重的人身伤害，或严重的设 备损坏。
警示!
意味着如果安全预防措施被忽视，则可能导致轻微的人身伤害或设备损坏。本条特别适 用于对装置的损坏及可能对被保护设备的损坏。
2.1.1 直流电源.......................................................................................................3 2.2 机械结构 .................................................................................................................3 2.3 环境条件参数..........................................................................................................3 2.4 型式试验 .................................................................................................................3
PIC18F2525_05中文资料
PIC18F2525_05中⽂资料2005 Microchip Technology Inc.DS80222B-page 1PIC18F2525/2620/4525/4620Clarifications/Corrections to the Data Sheet:In the Device Data Sheet (DS39626B ), the following clarifications and corrections should be noted. Any silicon issues related to the PIC18F2525/2620/4525/4620 devices will be reported in a separate silicon errata. Please check the Microchip web site for any existing issues.1.Module:I/O PortsThe TRIS setting for the TX pin on PORTC in T able 10-5 of the Device Data Sheet was incorrectly stated as ‘1’.The correct TRIS setting for the TX pin on PORTC is ‘0’.2.Module:ResetsThe PR2 initialization condition shown in Table 4-4RESET Instruction,Stack Resets and Wake-up via WDT or Interrupt should read “uuuu uuuu ” as shown in the following table (changes are shown in bold text):3.Module:Voltage-Frequency GraphThe title information for Figure 26-2: Voltage-Frequency Graph (Extended), references the wrong device family and has been changed to read as follows:FIGURE 26-2:PIC18F2525/2620/4525/4620 VOLTAGE-FREQUENCY GRAPH (EXTENDED)TABLE 4-4:INITIALIZATION CONDITIONS FOR ALL REGISTERSRegisterApplicable DevicesPower-on Reset,Brown-out Reset MCLR Resets,WDT Reset,RESET Instruction,Stack ResetsWake-up via WDT or Interrupt PR225252620452546201111 1111uuuu uuuuuuuu uuuuLegend:u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.Shaded cells indicate conditions do not apply for the designated device.PIC18F2525/2620/4525/4620 Data Sheet ErrataPIC18F2525/2620/4525/4620DS80222B-page 2? 2005 Microchip Technology Inc.4.Module:DC CharacteristicsIn Section 26.3 “DC Characteristics” (page 336),the specifications for V IL parameters D033B and D034 have been clarified and now read as follows:5.Module:A/D Converter CharacteristicsIn Table 26-24: A/D Converter Characteristics (page 359), specification A40 has been added:TABLE 26-24:A/D CONVERTER CHARACTERISTICS:PIC18FX525/X620 (INDUSTRIAL, EXTENDED)PIC18LFX525/X620 (INDUSTRIAL)6.Module:Instruction SetIn Table 24-2: PIC18FXXXX Instruction Set (pages 270-271), the ADDWF , ADDWFC and BTG instructions have been modified. The changes are shown in bold text:26.3DC Characteristics:PIC18F2525/2620/4525/4620 (Industrial, Extended)PIC18LF2525/2620/4525/4620 (Industrial)DC CHARACTERISTICS Standard Operating Conditions (unless otherwise stated)Operating temperature -40°C ≤ T A ≤+85°C for industrialParamNo.Symbol CharacteristicMinMaxUnitsConditionsV ILInput Low Voltage D033B D034OSC1T13CKIV SS V SS0.30.3V VXT, LP modesParamNo.Symbol CharacteristicMin Typ Max Units Conditions A40I ADA/D Current from V DD PIC18FXXXX—180—µA Average current during conversionPIC18LFXX20—90—µATABLE 26-25:PIC18FXXXX INSTRUCTION SETMnemonic,OperandsDescriptionCycles16-Bit Instruction WordStatus AffectedNotesMSbLSbBYTE-ORIENTED OPERATIONS ADDWF ADDWFC f, d, a f, d, a Add WREG and fAdd WREG and Carry bit to f 110010001001da 00da ffff ffff ffff ffff C, DC, Z, OV, N C, DC, Z, OV, N 1, 21, 2BIT-ORIENTED OPERATIONSBTG f, b , aBit Toggle f10111bbbaffffffff None1, 2Note 1:When a Port register is modified as a function of itself (e.g., MOVF PORTB, 1, 0), the value used will be that value present on the pins themselves. For example, if the data latch is ‘1’ for a pin configured as input and is driven low by an external device, the data will be written back with a ‘0’.2:If this instruction is executed on the TMR0 register (and where applicable, ‘d’ = 1), the prescaler will be cleared if assigned. PIC18F2525/2620/4525/4620 7.Module:Timing Diagrams andSpecificationsTable 26-6: External Clock Timing Requirements(page 343), has been revised (changes andadditions are shown in bold text).TABLE 26-6:EXTERNAL CLOCK TIMING REQUIREMENTS8.Module:EUSARTThe RX pin sampling information in Section 18.1.2“Sampling” has changed. This section now reads as follows:18.1.2SAMPLINGThe data on the RX pin is sampled three times by a majority detect circuit to determine if a high or a low level is present at the RX pin when SYNC is clear or when BRG16 and BRGH are both not set.The data on the RX pin is sampled once when SYNC is set or when BRGH16 and BRGH are both set.9.Module:MSSPIn Section 17.3.2 “Operation”, the following note has been added:10.Module:QFNIn the QFN pin diagram on page 3 and in Table1-3: PIC18F4525/4620 Pinout I/O Descriptions, the following note has been added: Note:It is recommended to connect the bottom pad of QFN package parts to V SS.Param.No.Symbol Characteristic Min Max Units Conditions1A F OSC External CLKI Frequency(1)DC1MHz XT, RC Oscillator modeDC25MHz HS Oscillator modeDC31.25kHz LP Oscillator modeDC40MHz EC Oscillator modeOscillator Frequency(1)DC4MHz RC Oscillator mode0.14MHz XT Oscillator mode425MHz HS Oscillator mode410MHz HS + PLL Oscillator mode5200kHz LP Oscillator mode1T OSC External CLKI Period(1)1000—ns XT, RC Oscillator mode40—ns HS Oscillator mode32—µs LP Oscillator mode25—ns EC Oscillator modeOscillator Period(1)250—ns RC Oscillator mode2501µs XT Oscillator mode40250ns HS Oscillator mode100250ns HS + PLL Oscillator mode5200µs LP Oscillator modeNote1:Instruction cycle period (T CY) equals four times the input oscillator time base period for all configurations except PLL. All specified values are based on characterization data for that particular oscillator type under standard operating conditions with the device executing code. Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current consumption. All devices are tested to operate at “min.” values with an external clock applied to the OSC1/CLKI pin. When an external clockinput is used, the “max.” cycle time limit is “DC” (no clock) for all devices.Note:The SSPBUF register cannot be used withread-modify-write instructions, such asBCF, BTFSC, COMF, etc.2005 Microchip Technology Inc.DS80222B-page 3PIC18F2525/2620/4525/4620DS80222B-page 4? 2005 Microchip Technology Inc.11.Module:Electrical CharacteristicsParameters D031A and D041A have been added to Section 26-3 “DC Characteristics”, as shown below:12.Module:Electrical CharacteristicsIn Table 26-1: Memory Programming Require-ments, parameters D132, D132A, D133 and D133A have been changed. The changes are shown in bold :TABLE 26-1:MEMORY PROGRAMMING REQUIREMENTS13.Module:Pinout I/O DescriptionsThe QFN column has been removed from T able 1-2:PIC18F2525/2620 Pinout I/O Descriptions.The PIC18F2525/2620 devices are not available in a QFN package.26.3DC Characteristics:PIC18F2525/2620/4525/4620 (Industrial)PIC18LF2525/2620/4525/4620 (Industrial)DC CHARACTERISTICS Standard Operating Conditions (unless otherwise stated)Operating temperature -40°C ≤ T A ≤+85°C for industrialParamNo.Symbol CharacteristicMinMaxUnitsConditionsV ILInput Low Voltage I/O ports:D031Awith SMBus bufferV SS0.8VV IHInput High Voltage I/O ports:D041Awith SMBus buffer2.1V DDVDC CHARACTERISTICS Standard Operating Conditions (unless otherwise stated)Operating temperature -40°C ≤ T A ≤+85°C for industrialParam No.SymCharacteristicMinTyp?MaxUnitsConditionsProgram Flash MemoryD132V IE V DD for Block Erase3.0— 5.5V Using ICSP? port, 25°C D132A V IW V DD for Externally Timed Erase or Write4.5—5.5V Using ICSP port, 25°C D133T IEICSP Block Erase Cycle Time —4—ms V DD ≥ 4.5V D133A T IW ICSP Erase or Write Cycle Time (externally timed) 1——ms V DD ≥ 4.5V, 25°CD133A T IWSelf-Timed Write Cycle Time—2—msPIC18F2525/2620/4525/4620REVISION HISTORYRev A Document (01/2005)First revision of this document.Data Sheet Clarification issues 1 (I/O Ports),2(Resets), 3 (Voltage-Frequency Graph), 4 (DCCharacteristics), 5 (A/D Converter Characteristics),6(Instruction Set) and 7 (Timing Diagrams andSpecifications).Rev B Document (09/2005)Added Data Sheet Clarification issues 8 (EUSART), 9(MSSP), 10 (QFN), 11-12 (Electrical Characteristics)and 13 (Pinout I/O Descriptions).2005 Microchip Technology Inc.DS80222B-page 5PIC18F2525/2620/4525/4620NOTES:DS80222B-page 6? 2005 Microchip Technology Inc.2005 Microchip Technology Inc.DS80222B-page 7Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with yourspecifications.MICROCHIP MAKES NO REPRESENTATIONS OR WAR-RANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED,WRITTEN OR ORAL, STATUTORY OR OTHERWISE,REL ATED TO THE INFORMATION, INCL UDING BUT NOT L IMITED TO ITS CONDITION, QUAL ITY , PERFORMANCE,MERCHANTABI LITY OR FITNESS FOR PURPOSE .Microchip disclaims all liability arising from this information and its use. Use of Microchip’s products as critical components in life support systems is not authorized except with express written approval by Microchip. No licenses are conveyed,implicitly or otherwise, under any Microchip intellectual property rights.TrademarksThe Microchip name and logo, the Microchip logo, Accuron, dsPIC, K EE L OQ , micro ID , MPLAB, PIC, PICmicro, PICSTART, PRO MATE, PowerSmart, rfPIC, and SmartShunt areregistered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.AmpLab, FilterLab, Migratable Memory, MXDEV, MXLAB, PICMASTER, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A.Analog-for-the-Digital Age, Application Maestro, dsPICDEM,/doc/e4ada243e45c3b3567ec8bce.html , dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit SerialProgramming, ICSP , ICEPIC, Linear Active Thermistor, MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM,/doc/e4ada243e45c3b3567ec8bce.html , PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel, Total Endurance and WiperLock are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.All other trademarks mentioned herein are property of their respective companies.2005, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.Printed on recycled paper.Note the following details of the code protection feature on Microchip devices:?Microchip products meet the specification contained in their particular Microchip Data Sheet.Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.Microchip is willing to work with the customer who is concerned about the integrity of their code.Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.Microchip received ISO/TS-16949:2002 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona and Mountain View, California in October 2003. The Company’s quality system processes andprocedures are for its PICmicro ? 8-bit MCUs, K EE L OQ ? code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.AMERICASCorporate Office2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200Fax: 480-792-7277 Technical Support:/doc/e4ada243e45c3b3567ec8bce.html Web Address:/doc/e4ada243e45c3b3567ec8bce.html AtlantaAlpharetta, GATel: 770-640-0034Fax: 770-640-0307BostonWestborough, MATel: 774-760-0087Fax: 774-760-0088 ChicagoItasca, ILTel: 630-285-0071Fax: 630-285-0075DallasAddison, TXTel: 972-818-7423Fax: 972-818-2924DetroitFarmington Hills, MITel: 248-538-2250Fax: 248-538-2260 Kokomo Kokomo, INTel: 765-864-8360Fax: 765-864-8387Los AngelesMission Viejo, CATel: 949-462-9523Fax: 949-462-9608San JoseMountain View, CATel: 650-215-1444Fax: 650-961-0286 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699Fax: 905-673-6509ASIA/PACIFICAustralia - SydneyTel: 61-2-9868-6733Fax: 61-2-9868-6755China - BeijingTel: 86-10-8528-2100Fax: 86-10-8528-2104 China - ChengduTel: 86-28-8676-6200Fax: 86-28-8676-6599 China - FuzhouTel: 86-591-8750-3506 Fax: 86-591-8750-3521 China - Hong Kong SAR Tel: 852-2401-1200Fax: 852-2401-3431China - QingdaoTel: 86-532-8502-7355 Fax: 86-532-8502-7205 China - ShanghaiTel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 China - ShundeTel: 86-757-2839-5507 Fax: 86-757-2839-5571 China - WuhanTel: 86-27-5980-5300 Fax: 86-27-5980-5118 China - XianTel: 86-29-8833-7250 Fax: 86-29-8833-7256 ASIA/PACIFICIndia - Bangalore Tel: 91-80-2229-0061 Fax: 91-80-2229-0062 India - New Delhi Tel: 91-11-5160-8631 Fax: 91-11-5160-8632 India - PuneTel: 91-20-2566-1512 Fax: 91-20-2566-1513 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Korea - GumiTel: 82-54-473-4301 Fax: 82-54-473-4302 Korea - SeoulTel: 82-2-554-7200Fax: 82-2-558-5932 or 82-2-558-5934 Malaysia - Penang Tel: 604-646-8870 Fax: 604-646-5086 Philippines - Manila Tel: 632-634-9065 Fax: 632-634-9069 SingaporeTel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-572-9526 Fax: 886-3-572-6459 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - TaipeiTel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 EUROPEAustria - WeisTel: 43-7242-2244-399 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - ParisTel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - Munich Tel: 49-89-627-144-0Fax: 49-89-627-144-44Italy - MilanTel: 39-0331-742611Fax: 39-0331-466781Netherlands - DrunenTel: 31-416-690399Fax: 31-416-690340Spain - MadridTel: 34-91-352-30-52Fax: 34-91-352-11-47UK - WokinghamTel: 44-118-921-5869Fax: 44-118-921-5820 W ORLDWIDE S ALES AND S ERVICE 08/24/05DS80222B-page 8? 2005 Microchip Technology Inc.。
中国与国外高温合金铸造高温合金和耐蚀合金牌近似对照
N80A
20
GH4037
GH37
-
-
AMS5829;
SAEHEV6;
-
-
ATGS4;
NC20KTA
ЭП617
2HRC,
2HR202
DTD747B;
N501,N503
21
GH4043
GH43
-
-
-
-
-
-ЭП598
-
-
22
GH4049
GH49
-
-
-
-
NCK15
ATD
ЭП929
HR4;
N115
ATGX
Z12CNKDW20
-
-
26
-
GH20
NCF800B;
NCF2B
Incoloy800
AMS5766,
5871;
X10NiCrAlTi32-20
25NC35-20;
NicralC
-
Incoloy800
27
-
GH32
-
HestelloyX
AMS5536
5754;
SG-NiCr21Fe18Mo
ATGE
中国与国外高温合金牌号近似对照
No.
中国
日本
JIS
美国
德国①
法国
NF
俄罗斯
TOCT
英国②
DS/DTD
GB/T
旧牌号
商业牌号
AMS/SAE
DIN
W-Nr.
L-Nr.
1
GH1015
GH15
-
-
-
-
-
-
各种物质饱和蒸汽压的算法
169.700
8.130
氯化钠
NaCl
976～1155
公式（2）
180。300
8.330
氯化钠
NaCl
1562~1430
公式（2)
185。800
8.548
氯化铅
PbCl2
500～950
公式(2)
141.900
8。961
氯化氢
HCl
-127～—60
7。06145
710.584
255.000
氯化亚汞
\
7。42164
1758。210
205.000
钡
Ba
930～1130
公式（2)
350。000
15.765
苯
C6H6
\
6.90565
1211。033
220。790
苯胺
C6H7N
\
7.24179
1675.300
200.000
苯酚
C6H6O
\
7。13617
1518.100
175。000
苯甲醇
C7H8O
20～113
7。81844
1950。300
194。360
苯甲醇
C7H8O
113～300
6。95916
1461.640
153.000
苯甲醚
C7H8O
\
6。98926
1453.600
200。000
苯甲酸
C7H6O2
60～110
公式(2)
63。820
9。033
苯甲酸甲酯
C8H8O2
25～100
7.43120
军品电池与充电器介绍资料
一：锂离子蓄电池组1.军用7串25.2V锂离子蓄电池产品概述：HML-J7C1OC型是军品级锂离子蓄电池，机壳采用铝合金材料，全密封，各项指标均达到国军标要求，以其优越的品质广泛应用于军工领域。
产品性能：1．安全防爆2．体积小，重量轻，使用方便。
3．自放电小，可长久使用。
技术参数：1、标称电压：25.2V2、额定容量：≥10Ah3、工作温度范围：-40℃～+55℃4、循环寿命：400次5. 电磁兼容性：满足GJB151A-1977中RS103的规定2.军用锂离子蓄电池组产品概述:HML-J4C09C型是军品级锂离子蓄电池，产品主要性能指标：1、标称电压：14.4V2、额定容量：≥9Ah3、工作温度范围：﹣40℃～+55℃4、循环寿命：400次供应配套军品级充电器3.负40度锂离子蓄电池组可根据需求定制，产品各项指标符合国军标要求。
二铅酸蓄电池组1. 12V/165AH型军用高功率免维护启动用蓄电池HMQ-G12165C型是军品级铅酸电瓶，各项指标均达到国军标要求，以其优越的品质广泛应用于军工领域。
产品主要性能指标:额定电压：12 (V)额定容量(20小时率)：165(Ah)储备容量： 326 (min)起动电流(零下18度)：600(A)外形尺寸(长x宽x高(总高))： 513×223×195(223)(mm)参考重量（干/湿）：30.5/42.5（kg）对应国标型号： 6-QW-165适用车型: 重型货车、大客车、斯太尔、金龙经中国船级社认可中国渔业船舶检验局ZY认可2.12V/100Ah型军用铅酸蓄电池HMQ-G12100C型是军品级铅酸电瓶，各项指标均达到国军标要求，以其优越的品质广泛应用于军工领域。
产品主要性能指标:额定电压：12 (V)额定容量(20小时率)：100 (Ah)储备容量：182 (min)起动电流(零下18度)：440(A)外形尺寸(长x宽x高(总高))： 406×176×210(230)(mm)参考重量（干/湿）：19.5/29.5（kg）对应国标型号： 6-QW-100适用车型: 重型货车、越野车、公共汽车：东风、解放、日野KM三：锂离子电池充电器1.军用锂电池充电器产品性能：HMC20-C1202型军用智能充电器是军品级锂离子电池组充电设备，其充电制式为恒流转恒压。
≤±1%或±100mv（取最大绝对值）
H 系列电源模块
产品特点
H 系列电源模块采用多层电路板SMT 工艺，5面金属外壳一体化实体封装，自然散热，适用于车载、舰载、地面设备等领域。
军用级产品最低贮存温度-55℃，最低工作温度-45℃；最高贮存温度+105℃，最高工作温度+85℃。
军用级产品执行SJ20668行业标准，工业级产品和民用产品满足企业标准及国家相关标准。
本系列产品具有输入电压范围宽、输出控制及多种保护功能齐备等特点.
本系列产品采用通用外形结构，可替代进口同类产品（日本LAMBDA 、美国POWER ONE ），同类通用产品可进行替换。
产品特性： 温度范围：
输入电压额定值 DC24V 工作温度：军用级-45℃～+85℃ 输入电压范围 DC18V ～36 V 工业级-25℃～+55℃
民用级0℃～+50℃
外形尺寸图:
单位:mm。
常用纽扣电池型号对照表
常用纽扣电池型号对照表常用纽扣电池型号对照表CR纽扣电池,CR表示锂-二氧化锰，CR后面的4位数字，前两位是直径，后两位是高，例如：CR2032是指一种20mm直径，3.2mm 高。
附：锌锰电池型号命名与标识说明：IEC标准中，R代表圆柱形，L代表碱性，数字代表电池的大小，数字后面的P代表高功率，这里有一个特殊规定，在表示五号普通锌锰电池时，要标识为R6P，而不是R06或者R6。
CR系列也是一种典型的干电池型号，常见的有CR2025、CR2032等。
其中C是以锂金属为负极，以二氧化锰为正极的化学电池体系，R表示电池的形状为圆柱形，如果是方形则F替代；20表示电池的直径是20mm，32代表电池的高度为3.2mm。
除了单支干电池型号命名外，还有一些组合干电池型号的标识表示如下：1、9V电池：6F22是由6个扁平形电池叠层的碳性电池；6LR61则是由6个扁平形电池叠层的碱性电池；2、AG系列：是直径很小的CR电池，分为AG1到AG13计13种，属于碱性电池；3、23A和27A：是由八个同一规格的AG电池叠层的，也称12V 扣式电池，27A大于23A。
这些组合的干电池型号往往是基于特殊电压或者容量的考虑，也只适用于一些特定领域。
由于这些干电池型号有一定的市场容量，知道它们属于干电池序列这一点，就便于把握其价格与特性。
另外还有非锌锰和锂锰系的干电池，如镁锰电池等，因为比较少见，所以对这种干电池及干电池型号介绍不多。
普通充电电池充电时间计算一、充电常识在这里，首先要说明的是，充电是使用充电电池的重要步骤。
适当合理的充电对延长电池寿命很有好处，而野蛮胡乱充电将会对电池寿命有很大影响。
上一篇曾说过，目前的锂电池基本都是根据各个产品单独封装，互不通用的，因此各个产品也提供各自的充电设备，互不通用，在使用时只要遵循各自的说明书使用即可。
所以本篇对电池充电的介绍主要是指镍镉电池和镍氢电池。
对镍隔电池和镍氢电池充电有两种方式，就是我们大家所熟知的“快充”和“慢充”。
霍尼韦尔燃烧产品手册
霍尼韦尔燃烧控制产品手册燃烧安全控制器燃气阀门组7800 系列燃烧安全控制器Satronic 系列燃烧安全控制器Honeywell 锅炉及燃烧器控制产品目录7800 - 系列燃烧程序控制器 (5)EC7800 / R M7800 - 燃烧程序控制器..........................................................................................5Q7800 - 通用接线座...............................................................................................................5S7800A - 吹扫时间定时卡......................................................................................................5S7800 - 工作状态显示板.........................................................................................................5S7810 - 数据通讯板..................................................................................................................5S7820A - 远端复位板...............................................................................................................5R7800 - 火焰信号放大器............................................................................................................5其它常用燃烧程序控制器 (6)R4343D/E - 火焰开关型控制器......... ................................................................................................6FC1000A/B-火焰开关型控制器...................................................................................................6RA890F/G - 基本型燃烧安全控制器.......................................................................................6火焰探测器 (7)C7015A - 红外滤波型火焰探测器.............................................................................................7C7027A - 一体化紫外型火焰探测器.............................................................................................7C7035A - 紫外型火焰探测器(紫外探测管可更换)........................................................................7C7061A/F-紫外，自检型火焰探测器................................................................................................7C7012A/C/E/F - 紫外型火焰探测器(可带探头自检及防爆)...............................................................7Satronic 燃烧安全控制器 (8)数字微处理器型燃油燃烧程序控制器.......................................................................................8数字微处理器型燃气燃烧程序控制器..........................................................................................8模拟型燃油燃烧程序控制器................................................................................................8模拟型燃气燃烧程序控制器...................................................................................................8点火变压器..................................................................................................................8火焰探测器.........................................................................................................8风门执行器 (9)MT4000 - 中小型燃烧机用风门或蝶阀执行器..............................................................................9LKS - 系列风门执行器...............................................................................................................9MODUTROL I V - 大中型燃烧器用风门执行器..............................................................................9MODUTROL I V - 系列执行器通用配件.......................................................................................9压力开关及压力控制器............................................................................................................10 L404-锅炉压力控制开关 (10)L91B - 锅炉蒸汽压力控制器...................................................................................................10P7800 - 锅炉蒸汽压力控制器................................................................................................10C6097A - 燃气、空气压力开关.............................................................................................10燃气电磁阀(UGV系列) (11)VE400AA - 系列点火电磁阀 (11)VE4000A1 -无流量调节功能，通断，常闭，快开螺纹连接电磁阀 (11)VE4000B1 -具有流量调节功能，通断，常闭，快开螺纹连接电磁阀 (11)VE 4000B3 -具有流量调节功能，通断，常闭，快开法兰连接电磁阀 (12)VE4000 C1- 具有流量调节和缓慢开启功能的通断常闭阀 (12)VE5000及V5055 -系列电液执行器型电动阀 (12)VQ400 -系列 “A”级 组合电磁阀 (13)VR400 -系列组合“A”级电磁阀 (14)VQ465、VQ480 -系列大口径组合电磁阀 (15)VG400、VG4000 -系列手动复位“A”级电磁阀 (16)BT-BC -系列大口径电磁阀 (16)VF 5000 - 系列燃气调节蝶阀 (17)HUPF -带过滤器的调压器，HUF -过滤器 (17)HUPF- 带过滤器的调压器 (17)HUF -过滤器 (17)HUG -燃气连接软管 (18)A4021A -燃气阀门泄漏检测器 (18)小型家用及商业用燃气电磁阀及控制器 (19)CVI 控制系统 (19)VR4605AB/CB 系列电磁阀及 S4560 系列控制器 (20)阀门流量曲线图 (21)VE400及VE4000 - 系列电磁阀流量曲线图 (21)VE4000及VE5000 -系列电磁阀流量曲线图......................................................... (22)VQ400 -系列组合电磁阀流量曲线图 (22)VQ465/VQ480 - 系列电磁阀流量曲线图 (23)VF5000A -系列蝶阀流量曲线图 (24)HUPF -系列调压器流量曲线图 (25)HUF -系列过滤器流量曲线图 (25)产品型号索引 (26)本产品手册如与出厂资料不同，请以出厂资料为准。
常见表面处理颜色代码与电镀中英文对照名称
常见表面处理颜色代码与电镀中英文对照名称现代电镀网10月12日讯：代码英文描述中文描述AB Antique brass 古青铜色AC Antique copper 古红铜色AL Almond 杏仁色AM Matt Antique Brass 平光青古铜AP Antique Pewter 古白镴色AR Antique copper(Rolling polish,not brushed) 古红铜色(滚光,不打砂线)AS Antique Satin Brass 青缎铜色AW Bronze Red 锈蚀红赭色AZ Antique bronze 古铜色BB Brushed satin nickel 砂线雾镍色BD Bronze, Distressed 风化竹子色BI Black Iron 黑铁色BL Black Paint With Dots 烤雪花灰黑色漆BP Brass plated w/lacquer 铜本色BQ Bisque 白淡黄色BR Burnished Copper 锈棕色(锈褐色),上30%哑光拉克BS Black Satin 雾镍黑BU Blue paint 烤蓝漆BV Brushed Brass,Light(PVD) 镀砂线淡铜色(PVD处理)BW Black Iron Without tembling黑铁色(无振动研磨)BY Brown /Yellow Paint 烤咖啡色漆/烤黄色漆混色CA Chrome + Pearl nickel 镀铬/珍珠镍混色CB Chrome + Brass plated 镀铬/铜本色混色CC Chrome + Polished brass 镀铬/青铜混色CD Chrome + Wood 镀铬/木纹混色CE Chrome + Antique gold 镀铬/英国玫瑰金色混色CG Chrome + Gold 镀铬/24K金混色CH Chrome+Sand black 镀铬色/黑色砂纹漆混色CI Chrome + Invisible antibacterial coating 镀铬色(抗菌镀膜)CJ Chrome+PVD-Pearl Nickel 镀铬/珍珠镍混色(以PVD处理) CK Chrome + Black 镀铬色/黑色混色CL Chrome + Satin Nickel 镀铬色/雾镍混色CM Chrome + white frosted glass 镀铬/雾玻璃混色CN Chrome + Brushed nickel 镀铬/砂线镍混色CO Copper plated finish 镀铜底CP Chrome 镀铬色CQ Chrome + Bisque 镀铬色/白淡黄混色CR Chrome + French Gold (PVD) 镀铬色/玫瑰金(以PVD处理)混色CS Chrome + Satin chrome 镀铬色/雾铬混色CT Chrome + PVD-Ti 镀铬色/镀钛混色CV Chrome(PVD) 镀铬色(以PVD处理)CW Chrome + White 镀铬/白色混色CY Chrome + polish brass PVD 镀铬/镀锆混色DB Dark Bronze 暗棕色EG Antique gold 英国玫瑰金色EP Ivory white 象牙白色FG White Frosted Glass 雾化玻璃(透明)GC Gold +Chrome 24K金色/镀铬混色GD Gray, Dark 深灰色GN Green Paint 烤绿漆GP Gold 24K金色GR Gray 浅灰色GW Gold + White 24K金色/白色混色GY Silver Gray 银灰色IP Antique nickel 古银镍色JG Polished Nickel (PVD) + Gold 亮镍色(以PVD处理)/24K金混色JH PVD-Polished nickel 亮镍色(以PVD处理)JP Polished nickel 亮镍色KP Black 黑色LB Silver Bronze 银褐色MB Silicon Bronze, Medium 中古硅铜色NA PVD-Brushed nickel +Chrome 砂线镍(以PVD处理)/镀铬混色NB Brushed nickel(No lacquer)(代码:015) 砂线镍(不上透明漆)NC Brushed nickel + chrome 砂线镍/镀铬混色ND PVD - Brushed nickel 砂线镍(以PVD处理)NE PVD - Brushed nickel + polish brass PVD 砂线镍(以PVD处理)/镀锆混色NF Rough casting (No finish) 无表面处理NG Brushed nickel + Gold 砂线镍/24K金混色NI Nickel plated 镀镍NM Brushed nickel + White frosted glass 砂线镍/雾玻璃混色NP Brushed nickel 砂线镍色NR Rough casting (No finish) + chrome 无表面处理/镀铬混色NT Brushed nickel + Pewter 砂线镍色/砂线暗镍混色NW Brushed nickel + White 砂线镍/白色混色NY Brushed nickel + polish brass PVD 砂线镍/镀锆混色PB Polish brass 青铜色PD Pearl nickel + Polish brass PVD 珍珠镍/镀锆混色PE Brass, polished 铜本色(素材抛光后)PF Pearl nickel +Chrome 珍珠镍/镀铬混色PG Pearl nickel +gold 珍珠镍/镀24K金色PH PVD-Pearl nickel 珍珠镍色(以PVD处理)PI PVD-Brushed Brass 镀砂线铜色(以PVD处理)PJ PVD-Pearl nickel +Chrome 珍珠镍色(以PVD处理)/镀铬混色PN Pearl nickel 珍珠镍色PR Pewter-Aged 古砂线暗镍色PT Pewter砂线暗镍色PU Pewter Rustic 锈蚀暗镍色RA Oil rubbed brown bronze 油棕铜色RB Oil rubbed bronze 油古红铜色RC Rose copper 玫瑰铜色RD PVD-Brushed rose copper 玫瑰铜色(抛砂线,以PVD处理) RE Red paint 烤红漆RG French Gold (PVD) 玫瑰金色(以PVD处理)RH Coarse brass chrome 抛砂镀铬色RP Rubbed Bornze 黑红铜色RU Copper Rustic 锈蚀红铜色SA Satin chrome + Polish Brass PVD + Chrome 雾铬/镀锆/镀铬混色SB PVD-Satin chrome+chrome 雾铬色(以PVD处理)/镀铬混色SC Satin chrome + chrome 雾铬/镀铬混色SG Satin chrome + gold 雾铬/24K金混色SH PVD-Satin chrome 雾铬色(以PVD处理)ST Satin chrome 雾铬色SY Satin chrome + polish brass PVD 雾铬/镀锆混色TG Antique brass + Gold 古青铜色/24K金混色TN PVD - Ti 镀钛色UG Brushed satin nickel + Gold 砂线雾镍色/24k金混色VB Venetian Bronze 油古黑铜色VG Verde Green 古绿色WA White + Polished brass 白色/青铜色混色WB White Paint With Dots 烤雪花米白色漆WC White + Chrome 白色/镀铬混色WG White + Gold 白色/24K金混色WH White 白色WK White + Black 白色/黑色混色WN White + Brushed nickel 白色/砂线镍混色WV White + Gray 白色/灰色混色WY White + polish brass PVD 白色/镀锆混色XA White/Green Paint/Yellow Paint/Blue Paint Trim 烤白漆/烤绿漆/烤黄漆/烤蓝漆混色XB Red Paint/Green Paint/Yellow Paint/Blue Paint Trim 烤绿漆/烤黄漆/烤红漆/烤蓝漆混色XC Yellow Paint/Red Paint/Blue Paint Trim 烤黄漆/烤红漆/烤蓝漆混色XD Yellow Paint/Green Paint/Blue Paint Trim 烤黄漆/烤绿漆/烤蓝漆混色YB Perma brass-PVD(代码:030) 似镀锆(YP)色YC polish brass PVD + chrome 镀锆色/镀铬混色YE Yellow paint 烤黄漆YM polish brass PVD+white frosted glass 镀锆/雾玻璃混色YP polish brass PVD 镀锆色YW Polish Brass PVD+White镀锆/白色混色ZN Zinc plated镀锌色ZP Gun metal 黑镍(黑珍珠)色CPD Chrome 3 Plated 镀铬色(三价铬)STD Satin Chrome 3 Plated雾铬色(三价铬)BQ1 DC,CAST客户专用WH1 CAST客户专用WH2 纯白色WH3 奶白色WH4 IKEA客户专用WH5 GE客户专用WH6 青白色(塑料花洒物料专用) WH7 米白色(B & Q客户专用) KP1 GE客户专用黑色RB1 油古红铜色(OBI客户专用)。
蜗蛇联合工程烈士警号产品说明书
©1997 Whelen Engineering Company Inc.Form No.13236F (050608)A u t o m o t i v e : S i r e n s /S w i t c h e sFor warranty information regarding this product, visit /warrantyDANGER! Sirens produce extremely loud emergency warning tones! Exposure to these tones without proper and adequate hearing protection, could cause ear damage and/or hearing loss! The Occupational Safety & Health Administration () provides information necessary to determine safe exposure times in Occupational Noise Exposure Section 1910.95. Until you have determined the safe exposure times for your specific application,operators and anyone else in the immediate vicinity should be required to wear an approved hearing protection device. Failure to follow this recommendation could cause hearing loss!•Proper installation of this product requires the installer to have a good understanding of automotive electronics, systems and procedures.•Whelen Engineering requires the use of waterproof butt splices and/or connectors if that connector could be exposed to moisture.•Any holes, either created or utilized by this product, should be made both air- and watertight using a sealant recommended by your vehicle manufacturer.•Failure to use specified installation parts and/or hardware will void the product warranty.•If mounting this product requires drilling holes, the installer MUST be sure that no vehicle components or other vital parts could be damaged by the drilling process. Check both sides of the mounting surface before drilling begins. Also de-burr the holes and remove any metal shards or remnants. Install grommets into all wire passage holes.•If this manual states that this product may be mounted with suction cups, magnets, tape or Velcro®, clean the mounting surface with a 50/50 mix of isopropyl alcohol and water and dry thoroughly.•Do not install this product or route any wires in the deployment area of your air bag. Equipment mounted or located in the air bag deployment area will damage or reduce the effectiveness of the air bag, or become a projectile that could cause serious personal injury or death. Refer to your vehicle owner’s manual for the air bag deployment area. The User/Installer assumes full responsibility to determine proper mounting location, based on providing ultimate safety to all passengers inside the vehicle.•For this product to operate at optimum efficiency, a good electrical connection to chassis ground must be made. The recommended procedure requires the product ground wire to be connected directly to the NEGATIVE (-) battery post (this does not include products that use cigar power cords).•If this product uses a remote device for activation or control, make sure that this device is located in an area that allows both the vehicle and the device to be operated safely in any driving condition.•It is recommended that these instructions be stored in a safe place and referred to when performing maintenance and/or reinstallation of this product.•FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT OR VEHICLE AND/OR SERIOUS INJURY TO YOU AND YOUR PASSENGERS!CAUTIONLoud siren noise can cause hearing damage and/or loss.Refer to OSHA Section 1910.95prior to putting ANY siren into service!Wear Protection!ACTIVATION OF THIS SIREN MAY DAMAGE UNPROTECTED EARS!Warnings to InstallersWhelen’s emergency vehicle warning devices must be properly mounted and wired in order to be effective and safe. Read and follow all of Whelen’s written instructions when installing or using this device. Emergency vehicles are often operated under high speed stressful conditions which must be accounted for when installing all emergency warning devices. Controls should be placed within convenient reach of the operator so that they can operate the system without taking their eyes off the roadway. Emergency warning devices can require high electrical voltages and/or currents. Properly protect and use caution around live electrical connections.Grounding or shorting of electrical connections can cause high current arcing, which can cause personal injury and/or vehicle damage, including fire. Many electronic devices used in emergency vehicles can create or be affected by electromagnetic interference. Therefore, after installation of any electronic device it is necessary to test all electronic equipment simultaneously to insure that they operate free of interference from other components within the vehicle. Never power emergency warning equipment from the same circuit or share the same grounding circuit with radio communication equipment. All devices should be mounted in accordance with the manufacturer’s instructions and securely fastened to vehicle elements of sufficient strength to withstand the forces applied to the device. Driver and/or passenger air bags (SRS) will affect the way equipment should be mounted. This device should be mounted by permanent installation and within the zones specified by the vehicle manufacturer, if any. Any device mounted in the deployment area of an air bag will damage or reduce the effectiveness of the air bag and may damage or dislodge the device. Installer must be sure that this device, its mounting hardware and electrical supply wiring does not interfere with the air bag or the SRS wiring or sensors. Mounting the unit inside the vehicle by a method other than permanent installation is not recommended as unit may become dislodged during swerving; sudden braking or collision. Failure to follow instructions can result in personal injury. Whelen assumes no liability for any loss resulting from the use of this warning device. PROPER INSTALLATION COMBINED WITH OPERATOR TRAINING IN THE PROPER USE OF EMERGENCY WARNING DEVICES IS ESSENTIAL TO INSURE THE SAFETY OF EMERGENCY PERSONNEL AND THE PUBLIC.Warnings to UsersWhelen’s emergency vehicle warning devices are intended to alert other operators and pedestrians to the presence and operation of emergency vehicles and personnel. However, the use of this or any other Whelen emergency warning device does not guarantee that you will have the right-of-way or that other drivers and pedestrians will properly heed an emergency warning signal. Never assume you have the right-of-way. It is your responsibility to proceed safely before entering an intersection, driving against traffic, responding at a high rate of speed, or walking on or around traffic lanes. Emergency vehicle warning devices should be tested on a daily basis to ensure that they operate properly. When in actual use, the operator must ensure that both visual and audible warnings are not blocked by vehicle components (i.e.: open trunks or compartment doors), people, vehicles, or other obstructions. It is the user’s responsibility to understand and obey all laws regarding emergency warning devices. The user should be familiar with all applicable laws and regulations prior to the use of any emergency vehicle warning device. Whelen’s audible warning devices are designed to project sound in a forward direction away from the vehicle occupants. However, because sustained periodic exposure to loud sounds can cause hearing loss, all audible warning devices should be installed and operated in accordance with the standards established by the National Fire Protection Association.Safety FirstThis document provides all the necessary information to allow your Whelen product to be properly and safely installed. Before beginning the installation and/or operation of your new product, the installation technician and operator must read this manual completely. Important information is contained herein that could prevent serious injury or damage.WARNING: This product can expose you to chemicals including Methylene Chloride which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to .Installation Guide:WPA™ Series Waterproof Amplifier51 Winthrop RoadChester, Connecticut 06412-0684Phone: (860) 526-9504Internet: Sales e-mail: autosale@Customer Service e-mail: custserv@®ENGINEERING COMPANY INC.INTRODUCTION...This manual outlines the procedures necessary for the installation of the WPA TM Series Waterproof Amplifier. This includes the 100 Watt models (WPA112, WPA124) and 58 Watt models (WPA512 and WPA524).Mounting the WPA Series Waterproof Siren Amplifier:Caution:If the amplifier is mounted vertically, it must be oriented so that the connector end of the amplifier is facing downward!1.Locate a suitable mounting location for the WPA. Do notmount this product in any location where it may be exposed to extreme temperatures.2.Be sure that the remote amplifier fits properly and does notinterfere with any vehicle components.3.Position the remote amplifier on the proposed mountinglocation. Using an awl or other suitable tool, scribe the mounting surface where the mounting holes are to be drilled.Caution:As mounting the WPA will require drilling, it is absolutely necessary to make sure that no other vehicle components could be damaged by the drilling process. If damage is likely, select a different mounting location.4.Carefully drill the mounting holes in the areas scribed instep 3. The diameter of these holes will be determined by the size of the mounting hardware and the thickness of the mounting surface.ing the supplied #10 x 3/4” sheet metal screws and #10external tooth lock washers, secure the remote amplifier to the mounting location.Wiring the WPA Series Waterproof Amplifier:Connecting To Power:1.Following the factory wiring harness, extend the RED andBLACK wires to the battery.WARNING! All customer supplied wires that connect to the positive terminal of the battery must be sized to supply at least 125% of the maximum operating current and FUSED at the battery to carry that load. DO NOT USE CIRCUIT BREAKERS WITH THIS PRODUCT!2.Connect the RED wire to one end of a user supplied fuseblock. Do not connect this unit to the battery yet!3.Connect the BLACK wire directly to the vehicle’s chassisground (typically adjacent to the battery).Connecting To Your Speaker:1.Route the ORANGE and BROWN wires towards yourspeaker.2.Connect the ORANGE wire to the POSITIVE (+) terminalon the speaker.3.Connect the BROWN wire to the NEGATIVE (-) terminal onthe speaker.Note:The two (2) BLUE wires are used to connect your two-way radio’s external speaker to theWPA for radio rebroadcast. This is anoptional connection and does not effect theother operations of the WPA.Wiring The WPA Siren Amplifier Radio Rebroadcast Wires (BLUE):1.Locate the two wires that connect the external speaker tothe vehicle’s two-way radio.2.Cut one of these wires and splice one of the BLUE wiresinto this circuit.3.Cut the remaining speaker wire and splice the remainingBLUE wire into this circuit.Note:Radio rebroadcast will NOT work with amplified remote speakers! If your remotespeaker is amplified (i.e.: contains a poweramp circuit in the speaker assembly), do notenable the radio rebroadcast feature.Connecting To Your Horn Relay (Optional): Note:This option can only be enabled when using customer supplied switches.1.Locate your vehicle’s horn relay. Now locate the wire thatconnects the vehicle horn to the horn relay output and cut this wire.2.Extend each end of the cut wire (using a minimum 16gauge wire) to a user supplied SPDT (single pole/double throw) horn transfer switch.3.Connect the wire coming from the horn relay output to theswitch “wiper” as shown in Figure 1.4.Connect the wire coming from the horn to one side of theswitch as shown in Figure 1.5.Connect the WHITE/GREEN wire to the other side of theswitch as shown in Figure 1.The installation of your WPA Series siren amplifier will be complete after the fuse block wire is connected to the POSITIVE (+) terminal of the battery. After this connection has been made,inspect the fuses at the amplifier and at the battery. If either of these fuses are blown,carefully inspect all of the circuit wires and make sure they are wired correctly. Replace the blown fuses with one of an identical amp rating as the original. If these fuses blow after installation or activation, contact Whelen Engineering Technical Support.Hands-Free Siren Activation...The WPA™ Series Waterproof Amplifier, when installed according to the wiring diagram above, offers the ability to activate siren tones using the vehicle’s steering wheel horn ring.After the horn transfer switch has been set to siren operation,the hands-free mode is enabled when the customer installed control switch, connected via the WHT/ORG wire, is closed.When the hands-free mode is enabled, pressing the horn ring button will start the Wail siren tone. A second press of the horn ring button will change the siren tone from Wail to Yelp. A third press will change the siren tone from Yelp to Piercer™. The siren tones will continue to cycle from Wail to Yelp to Piercer with each subsequent press of the horn ring button. Two, rapid presses on the horn ring button ends hands-free siren tone generation until the horn ring button is pressed again. At that time the cycle is repeated.To exit the hands-free mode, end current siren tone, turn off the customer installed switch for the hands-free mode and return the horn transfer switch to its normal operating position. Normal vehicle horn operation is then restored.Manual Siren Activation (Manual Mode)...The WPA Siren Amplifier, when installed according to the wiring diagram (Figure 1), offers manual siren activation using the vehicle’s steering wheel horn ring as a momentary switch. After the horn transfer switch has been set to siren operation, the horn ring button will now activate the manual siren tone. The manual siren tone “ramps up” to a predetermined level and continues at that level until the manual switch is released. When the switch is released, the tone is immediately terminated.WPA TM SIREN SPECIFICATIONS SPEC:WPA112TMWPA124TMWPA512TMWPA524TMINPUT VOLTAGE13.5 VDC ± 20%26.5 VDC ± 20%13.5 VDC ± 20%26.5 VDC ± 20%INPUT CURRENT (OFF)0 mA0 mA0 mA0 mAINPUT CURRENT (STANDBY)10 mA (TYP .) 5 mA (TYP .)10 mA (TYP .) 5 mA (TYP .)INPUT CURRENT (SIREN)8 Amps (TYP .) 4 Amps (TYP .) 5 Amps (TYP .) 3 Amps (TYP .)OUTPUT VOLTAGE 34 V RMS (MAX.)34 V RMS (MAX.)25 V RMS (MAX.)25 V RMS (MAX.)SPEAKER(1) 11 ohm(1) 11 ohm(1) 11 ohm(1) 11 ohmOUTPUT POWER @ 15 VDC 105 WATTS (MAX.)105 WATTS (MAX.)58 WATTS (MAX.)58 WATTS (MAX.)CONROL VOLTAGE INPUT VOLTAGE INPUT VOLTAGE INPUT VOLTAGE INPUT VOLTAGE CONTROL CURRENT 125 mA (TYP .)125 mA (TYP .)125 mA (TYP .)125 mA (TYP .)HORN RING VOLTAGE INPUT VOLTAGE INPUT VOLTAGE INPUT VOLTAGE INPUT VOLTAGE OR GROUND OR GROUND OR GROUND OR GROUND HORN RING CURRENT 15 mA (TYP .)15 mA (TYP .)15 mA (TYP .)15 mA (TYP .)OPERATING TEMP .-30° C TO +60° C -30° C TO +60° C-30° C TO +60° C-30° C TO +60° COPERATING HUMIDITY95% NON-CONDENSING 95% NON-CONDENSING95% NON-CONDENSING95% NON-CONDENSINGTo Adjust the Radio Repeat Levels...Before using the WPA Series Waterproof Amplifier, the Radio Repeat output volume must be adjusted to satisfactory operating levels. To adjust this level, a small, flat-blade screwdriver is needed.Radio Repeat VolumeLocate the Radio Repeat adjustment port (potentiometer) to the left of the 12-position input port on the remote amplifier. The potentiometer is hidden behind a 10-32 Phillips head machine screw. Once this screw is removed, set the volume level of the vehicle’s two-way radio to its normal operating volume. Place the amplifier in Radio Repeat mode. Insert the screwdriver in the Radio Repeat adjustment port and turn in a clockwise direction to increase the sound to its maximum desired volume.Return the Phillips head screw to its original position (see Fig. 2below).。
RM12BRB-3S资料
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at , or contact your Hirose sales representative.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at , or contact your Hirose sales representative.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at , or contact your Hirose sales representative.
BR301资料
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20%
CHARACTERISTICS
Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum Average Forward Rectified Output Current at Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load Maximum Forward Voltage Drop Per Bridge Element at 1.5A Peak Maximum Reverse Current at Rated TA=25℃ DC Blocking Voltage Per Element Operating Temperature Range Storage Temperature Range Notes:1.Unit mounted on metal chassis 2. Unit mounted on P.C. board TA=100℃ Tc=50℃ TC=100℃ TA=50℃ (Note1) (Note1) (Note2)
FIG.4-TYPICAL REVERSE CHARACTERISTICS
SPEC_TM035KDH03
天马3.5英寸数字液晶屏技术规格1、通用规格接口类型是根据内存条金手指上导电触片的数量来划分的，金手指上的导电触片也习惯称为针脚数（Pin）。
TSP：touch Screen panel主要指触摸屏的面板。
注解一：查看最佳的图像质量的方向是不同于TFT定义，有一个180度的转变。
注解二：关于环境保护的要求：符合RoHS（限制在电子电气产品中使用有害物质的指令）注解三:LCM重量公差：±5％AS13LCM35D驱动板技术规格AS13LCM35D工作原理图图中名词解释Decoder：解码器，译码器VR（voltage regulation）：电压调节（调压）MCU（Microprogrammed Control Unit）：微程序控制器AS13LCM35D接口定义J3插座定义AS13LCM35D连接线示意图3、绝对最大额定参数（Absolute Maximum Ratings）3.1操作TFT-LCD面板（Driving TFT LCD Panel）4、电特性（Electrical Characteristics）4.1操作TFT-LCD面板（Driving TFT LCD Panel）GND=0V，Ta=25℃4.2控制背光（Driving Backlight）注解一：下图显示的LED背光连接。
注解二：一个LED：IF=20毫安，VF= 3.2V注解三：最小的LED寿命：20,000小时6、光学特性（Optical Characteristics）6.1光学鉴定（Optical Specification）Ta=25℃实验条件（Test Conditions）1. VF= 3.2V，IF = 20mA下的LED电流，环境温度为25℃。
2. 测试系统是指注解1和注解2。
注解一：光学测量系统的定义。
在黑暗的房间，应测量的光学特性。
运行5分钟后，测量的光学性质在液晶屏幕的中心点。
所有输入端子的液晶面板必须是地面测量时面板的中心区域。
OHR-B35系列12V驱动,开关量输出操作端隔离栅使用说明书
New Hong Run Precision Instruments Co., LtD. Hong Run Precision Instruments Co., LtD.OHR-B35系列12V驱动,开关量输出操作端隔离栅将安全区的电源通过开关控制，驱动危险区的现场本安设备，它允许控制开关直接连接到24V供电回路的任一端。
本产品适用于驱动如电磁阀、声光报警等本安设备。
产品介绍1 显示面板外观结构图2 选型表OHR-B35系列12V驱动,开关量输出操作端隔离栅使用说明书虹润EVT1/EVT2：工作指示灯：输入信号短接时，指示灯为绿色；输入信号断开时，指示灯为红色35mm导轨式安装，安装时请注意卡位稳定、牢固，请尽可能垂直安装，以利于仪表内部热量散发12V驱动,开关量输出操作端隔离栅 OHR-B35 位 规格 注释 7/8 <输入>输入I/输入II(从列表中选择代码)代码 X K7 K8 K9/78/910/9/10<输出>输出I/输出II(从列表中选择代码)类型无输出(仅限于第Ⅱ路)12V/35mA输出12V/45mA输出12V/60mA输出代码X 36类型无输入(仅限于第Ⅱ路)触点开关量/111.4mm121.2m m可插拔端子432178956101514131112EVT1可插拔端子17.5mmEVT2工作指示灯绿色：接点信号闭合红色：接点信号断开工位号4 认证参数35mA输出时内部等效电路310Ω（最大）最低24V限流35mA 输出电压(V)输出电流(mA)45mA输出时内部等效电路250Ω（最大）最低22V限流45mA 输出电压(V)输出电流(mA)60mA输出时内部等效电路200Ω（最大）最低22V限流60mA输出电压(V)输出电流(mA)图一：CNEx16.0380【Exia Ga】IIB ，【Exia Ga】IIC(国家级仪器仪表防爆安全监督检验站认证)10-11 13-14IIC 12V35mA Um=250V Uo=28VDC Io=93mA Po=0.65W Co=0.05μF Lo=2.4mH防爆证号防爆标志认证参数端子最大允许电压电压电流功率电容电感电源供电电压范围 功耗危险侧信号输出内部等效电路 开路时输出电压电流(35、45、60mA)时输出电压 安全侧输入开关闭合或晶体管导通时，向危险区设备供电输入开关断开或晶体管不导通时，不向危险区设备供电绝缘强度本安端与非本安端环境条件 工作温度相对湿度保存温度标准电磁兼容性DC24V±10% 35mA输出≤1W，45mA输出≤1.5W，60mA输出≤2.5W 见(图一)24-26V ≥12V 2500Vrms (1 min，无火花)0～50℃(无凝露、无结冰)25%～85%RH -10～60℃(无凝露、无结冰)符合GB/T18268工业设备应用要求（IEC 61326-1）IIC 12V45mA Um=250V Uo=28VDC Io=119mA Po=0.83W Co=0.05μF Lo=2.0mH IIB 12V60mA Um=250V Uo=28VDC Io=150mA Po=1.05W Co=0.46μF Lo=3.5mH端子号端子说明危险区(蓝色)In1(24V－)In1(24V＋)In2(24V－)In2(24V＋)Out1＋Out1－Out2＋Out2－124510111314安全区(绿色)IN1IN2 OUT1OUT2Power+ -+ -11112131415987654321+-+-危险区安全区DC24VDC24V。