N14ERROR
C语言常见错误代码释义
C语言常见错误代码释义错误代码及错误信息错误释义error 1: Out of memory 存溢出error 2: Identifier expected 缺标识符error 3: Unknown identifier 未定义的标识符error 4: Duplicate identifier 重复定义的标识符error 5: Syntax error 语法错误error 6: Error in real constant 实型常量错误error 7: Error in integer constant 整型常量错误error 8: String constant exceeds line 字符串常量超过一行error 10: Unexpected end of file 文件非正常结束error 11: Line too long 行太长error 12: Type identifier expected 未定义的类型标识符error 13: Too many open files 打开文件太多error 14: Invalid file name 无效的文件名error 15: File not found 文件未找到error 16: Disk full 磁盘满error 17: Invalid compiler directive 无效的编译命令error 18: Too many files 文件太多error 19: Undefined type in pointer def 指针定义中未定义类型error 20: Variable identifier expected 缺变量标识符error 21: Error in type 类型错误error 22: Structure too large 结构类型太长error 23: Set base type out of range 集合基类型越界error 24: File components may not be files or objectsfile分量不能是文件或对象error 25: Invalid string length 无效的字符串长度error 26: Type mismatch 类型不匹配error 27：error 27：Invalid subrange base type 无效的子界基类型error 28：Lower bound greater than upper bound 下界超过上界error 29：Ordinal type expected 缺有序类型error 30：Integer constant expected 缺整型常量error 31：Constant expected 缺常量error 32：Integer or real constant expected 缺整型或实型常量error 33：Pointer Type identifier expected 缺指针类型标识符error 34：Invalid function result type 无效的函数结果类型error 35：Label identifier expected 缺标号标识符error 36：BEGIN expected 缺BEGINerror 37：END expected 缺ENDerror 38：Integer expression expected 缺整型表达式error 39：Ordinal expression expected 缺有序类型表达式error 40：Boolean expression expected 缺布尔表达式error 41：Operand types do not match 操作数类型不匹配error 42：Error in expression 表达式错误error 43：Illegal assignment 非法赋值error 44：Field identifier expected 缺域标识符error 45：Object file too large 目标文件太大error 46：Undefined external 未定义的外部过程与函数error 47：Invalid object file record 无效的OBJ文件格式error 48：Code segment too large 代码段太长error 49：Data segment too large 数据段太长error 50：DO expected 缺DOerror 51：Invalid PUBLIC definition 无效的PUBLIC定义error 52：Invalid EXTRN definition 无效的EXTRN定义error 53: Too many EXTRN definitions 太多的EXTRN定义error 54：OF expected 缺OFerror 55：INTERFACE expected 缺INTERFACEerror 56：Invalid relocatable reference 无效的可重定位引用error 57：THEN expected 缺THENerror 58：TO or DOWNTO expected 缺TO或DOWNTOerror 59：Undefined forward 提前引用未经定义的说明error 61：Invalid typecast 无效的类型转换error 62：Division by zero 被零除error 63：Invalid file type 无效的文件类型error 64：Cannot read or write variables of this type 不能读写此类型变量error 65：Pointer variable expected 缺指针类型变量error 66：String variable expected 缺字符串变量error 67：String expression expected 缺字符串表达式error 68：Circular unit reference 单元UNIT部件循环引用error 69：Unit name mismatch 单元名不匹配error 70：Unit version mismatch 单元版本不匹配error 71：Internal stack overflow 部堆栈溢出error 72：Unit file format error 单元文件格式错误error 73：IMPLEMENTATION expected 缺IMPLEMENTATIONerror 74：Constant and case types do not match 常量和CASE类型不匹配error 75：Record or object variable expected 缺记录或对象变量error 76：Constant out of range 常量越界error 77：File variable expected 缺文件变量error 78：Pointer expression expected 缺指针表达式error 79：Integer or real expression expected 缺整型或实型表达式error 80：Label not within current block 标号不在当前块error 81：Label already defined 标号已定义error 82：Undefined label in preceding statement part 在前面未定义标号error 83：Invalid argument 无效的参数error 84：UNIT expected 缺UNITerror 85: ";" expected 缺“；”error 86：":" expected 缺“：”error 87："," expected 缺“，”error 88："(" expected 缺“（”error 89：")" expected 缺“）”error 90："=" expected 缺“=”error 91：":=" expected 缺“:=”error 92："[" or "(." Expected 缺“[”或“（.”error 93: "]" or ".)" expected 缺“］”或“.）”error 94："." expected 缺“.”error 95: ".." expected 缺“..”error 96：Too many variables 变量太多error 97：Invalid FOR control variable 无效的FOR循环控制变量error 98：Integer variable expected 缺整型变量error 99：Files and procedure types are not allowed here 该处不允许文件和过程类型error 100：String length mismatch 字符串长度不匹配error 101：Invalid ordering of fields 无效域顺序error 102：String constant expected 缺字符串常量error 103：Integer or real variable expected 缺整型或实型变量error 104：Ordinal variable expected 缺有序类型变量error 105：INLINE error INLINE错误error 106：Character expression expected 缺字符表达式error 107：Too many relocation items 重定位项太多error 108：Overflow in arithmetic operation 算术运算溢出error 112：CASE constant out of range CASE常量越界error 113：Error in statement 表达式错误error 114：Cannot call an interrupt procedure 不能调用中断过程error 116：Must be in 8087 mode to compile this 必须在8087模式编译error 117：T arget address not found 找不到目标地址error 118：Include files are not allowed here 该处不允许INCLUDE文件error 119：No inherited methods are accessible here 该处继承方法不可访问error 121：Invalid qualifier 无效的限定符error 122：Invalid variable reference 无效的变量引用error 123：Too many symbols 符号太多error 124：Statement part too large 语句体太长error 126：Files must be var parameters 文件必须是变量形参error 127：Too many conditional symbols 条件符号太多error 128：Misplaced conditional directive 条件指令错位error 129：ENDIF directive missing 缺ENDIF指令error 130：Error in initial conditional defines 初始条件定义错误error 131：Header does not match previous definition 和前面定义的过程或函数不匹配error 133：Cannot evaluate this expression 不能计算该表达式error 134：Expression incorrectly terminated 表达式错误结束error 135：Invalid format specifier 无效格式说明符error 136：Invalid indirect reference 无效的间接引用error 137：Structured variables are not allowed here 该处不允许结构变量error 138：Cannot evaluate without System unit 没有System单元不能计算error 139：Cannot access this symbol 不能存取符号error 140：Invalid floating point operation 无效的符号运算error 141：Cannot compile overlays to memory 不能编译覆盖模块至存error 142：Pointer or procedural variable expected 缺指针或过程变量error 143：Invalid procedure or function reference 无效的过程或函数调用error 144：Cannot overlay this unit 不能覆盖该单元error 146：File access denied 不允许文件访问error 147：Object type expected 缺对象类型error 148：Local object types are not allowed 不允许局部对象类型error 149：VIRTUAL expected 缺VIRTUALerror 150: Method identifier expected 缺方法标识符error 151：Virtual constructors are not allowed 不允许虚构造函数error 152：Constructor identifier expected 缺构造函数标识符error 153：Destructor identifier expected 缺析构函数标识符error 154：Fail only allowed within constructors 只能在构造函数使用Fail标准过程error 155：Invalid combination of opcode and operands 操作数与操作符无效组合error 156：Memory reference expected 缺存引用指针error 157：Cannot add or subtract relocatable symbols 不能加减可重定位符号error 158：Invalid register combination 无效寄存器组合error 159：286/287 instructions are not enabled 未激活286/287指令error 160：Invalid symbol reference 无效符号指针error 161：Code generation error 代码生成错误error 162：ASM expected 缺ASMerror 166：Procedure or function identifier expected 缺过程或函数标识符error 167：Cannot export this symbol 不能输出该符号error 168：Duplicate export name 外部文件名重复error 169：Executable file header toerror 170：Too many segments 段太多。
SIGALARM Model 210 MicroGuard 414 MicroGuard 414错误
SkyAzúl, Equipment Solutions301-371-61261FAULT REPORTING AND FAULT CODESSystem Fault Codes provide one of the most important ways to quickly locate and assess problems in your MicroGuard ®System. Please review this section carefully.FAULT DIAGNOSTIC PROCEDURESEach time the System is turned on, it goes through a self-testing process lasting two to three seconds that automatically detects any Faults in the System. During normal operation, a Self-Test can be initiated at any time by pressing the TEST button on the Display Console. Fault conditions in external sensors are detected without a System Self-Test.Faults detected in the System during Self-Test, are indicated on the Display Console in the following way:•The word FAULT will appear in the information area of the left Display.•The RED LAMP will illuminate and the AUDIBLE ALARM will sound.Diagnosis of a Fault is obtained by PRESSING and HOLDING the TEST button. The System will then go through a Self-Test followed by the appearance of a Fault Code screen. The Fault Code screen will remain visible as long as the TEST button is pressed. Information will be displayed on the screen in the four groups shown in Figure 5.0.Note: Always repair Analog Sensor Faults (AAA) prior to investigating other faults. A complete listing of all possible Fault Codes and the description of each is listed on the following pages.000 NO FAULTS001TX.0PISTON PRESSURE SENSOR002 TX.1 ROD PRESSURE SENSOR 004 AIN2 EXTENSION SENSOR 008 AIN3 BOOM ANGLE SENSOR 016 AIN4 S’STRUCTURE ANGLE SENSOR 032 AIN5 SWING POTENTIOMETER “A” 064AIN6SWING POTENTIOMETER “B”Group AAA Analog Sensors0 NO FAULTS1 1 DIGITAL INPUT AND OUTPUT2 2 ANALOG INPUT AND OUTPUT44DISPLAY UNITGROUP B IO FAULTS00 NO FAULTS 01 1 PROGRAM ROM 02 2 DUTY ROM 04 4 SCRATCHPAD RAM 088PERSONALITY ROMGROUP CC MEMORY FAULTS00 NO FAULTS 01 1 NO DUTY FOUND 022CURRENT DUTY BADGROUP DD GENERAL FAULTSFIGURE 5.0 FAULT CODES2SkyAzúl, Equipment Solutions 301-371-61263018 Fault 002 & 016 019 Fault 001, 002, & 016 020 Fault 004 & 016 021 Fault 001, 004, & 016 022 Fault 002, 004, & 016023 Fault 001, 002, 004, &016 024 Fault 008, & 016025 Fault 001, 008, & 016026 Fault 002, 008, & 016027 Fault 001, 002, 008, &016028 Fault 004, 008, & 016 029 Fault 001, 004, 008, &016 030 Fault 002, 004, 008, &016 031 Fault 001, 002, 004,008, & 016 032 Swing Pot “A” 033 Fault 001, & 032 034 Faults 002, & 032035Faults 001, 002, &AAA Fault Codes continuedFAULT No . DESCRIPTION036 Faults 004 & 32 037 Faults 001, 004, &032 038 Faults 002, 004, &032 039 Faults 001, 002, 004, & 032 040Faults 008, & 032 041 Faults 001 008, &032 042Faults 002, 008, &032 043Faults 001, 002, 008, & 032 044Faults 004, 008, &032 045Faults 001, 004, 008, & 032 046 Faults 002, 004, 008, & 032 047 Faults 001, 002, 004, 008, & 32048 Faults 016 & 032 049Faults 001, 016, &032 050 Faults 002, 016, &032 051 Faults 001, 002, 016, & 032 052Faults 004, 016, &AAA Fault CodesFAULT No. DESCRIPTIONFigure 5.2 AAA Analog Sensor Fault CodesNumbers 1-127 continuedSkyAzúl, Equipment Solutions 301-371-61264053 Faults 001, 004, 016,& 32 054 Faults 002, 004, 016,& 32 055 Faults 001, 002, 004,016, & 32 056 Faults 008, 016, &032 057 Faults 001, 008, 016,& 032 058 Faults 002, 008, 016,& 032 059 Faults 001, 002, 008,016, & 032 060 Faults 004, 008, 016,& 032 061 Faults 001, 004, 008,016, & 032 062 Faults 002, 004, 008,016, & 032 063 Faults 001, 002, 004, 008, 016, & 032 064 SWING POT “B” 065 Faults 001 & 064 066 Faults 002 & 064 067 Faults 001, 002, &064 068 Faults 004 & 064 069 Faults 001, 004, &064 070 Faults 002, 004, &064 071Faults 001, 002, 004,AAA Fault Codes continuedFAULT No . DESCRIPTION072 Faults 008, & 64 073 Faults 001, 008, & 64 074 Faults 002, 008, &064 075 Faults 001, 002, 008,& 064 076 Faults 004, 008, &064 077 Faults 001, 004, 008,& 064 078 Faults 002, 004, 008,& 064 079 Faults 001, 002, 004,008, & 064 080 Faults 016 & 064 081 Faults 001, 016 & 064 082 Faults 002, 016 & 064 083 Faults 001, 002, 016& 064 084 Faults 004, 016, &064085 Faults 001, 004, 016,& 064 086 Faults 002, 004, 016,& 064 087 Faults 001, 002, 004,016, & 064 088 Faults 008, 016, &064 089 Faults 001, 008, 016,& 064 090Faults 002, 008, 016,AAA Fault Codes continuedFAULT No . DESCRIPTIONFigure 5.2 AAA Analog Sensor Fault CodesNumbers 1-127 continuedSkyAzúl, Equipment Solutions301-371-61265091 Faults 001, 002, 008,016, & 064 092 Faults 004, 008, 016,& 064 093 Faults 001, 004, 008,016, & 064 094 Faults 002, 004, 008,016, & 064 095 Faults 001, 002, 004, 008, 016, & 064 096 Faults 032, & 064 097 Faults 001, 032, &064 098 Faults 002, 032, &064 099 Faults 001, 002, 032,& 064 100 Faults 004, 032, &064 101 Faults 001, 004, 032,& 064 102 Faults 002, 004, 032,& 064 103 Faults 001, 002, 004,032, & 064 104 Faults 008, 032, &064 105 Faults 001, 008, 032,& 064 106 Faults 002, 008, 032,& 064 107 Faults 001, 002, 008,032, & 064 108 Faults 004, 008, 032,& 064 109Faults 001, 004, 008,AAA Fault Codes continuedFAULT No . DESCRIPTION110 Faults 002, 004, 008,032, & 064 111 Faults 001, 002, 004, 008, 032, & 064 112 Faults 016, 032, &064 113 Faults 001, 016, 032,& 064 114 Faults 002, 016, 032,& 064 115 Faults 001, 002, 016,032, & 064 116 Faults 004, 016, 032,& 064 117 Faults 001, 004, 016,032, & 064 118 Faults 002, 004, 016,032, & 064 119 Faults 001, 002, 004, 016, 032, & 064 120 Faults 008, 016, 032,& 064121 Faults 001, 008, 016,032, & 064 122 Faults 002, 008, 016,032, & 064 123 Faults 001, 002, 008, 016, 032, & 064 124 Faults 004, 008, 016,032, & 064 125 Faults 001, 004, 008, 016, 032, & 064 126 Faults 002, 004, 008, 016, 032, & 064 127Faults 001, 002, 004,AAA Fault Codes continuedFAULT No . DESCRIPTIONFigure 5.2 AAA Analog Sensor Fault CodesNumbers 1-127 continuedSkyAzúl, Equipment Solutions 301-371-612660 No Faults1Digital Input and 2 Analog Input andOutput 3 Faults 1 & 2 4 Display Unit 5 Faults 1 & 4 6 Faults 2 & 47Faults 1, 2, & 4FAULT No .DESCRIPTION 00 No Faults01 Program ROM 02 Duty ROM 03 Faults 01 & 02 04 Scratchpad RAM 05 Faults 02 & 03 06 Faults 02 & 04 07 Faults 01, 02, & 04 08 Personality ROM 09Faults 01, & 08 10Faults 02 & 08 11Faults 01, 02, & 08 12Faults 04 & 08 13Faults 01, 04, & 08 14 Faults 02, 04, & 0815Faults 01, 02, 04, &FAULT No .DESCRIPTION 0No Faults01No Duty02 Current Duty Bad03Faults 01 & 02FAULT No .DESCRIPTIONFigure 5.3 B IO Fault CodesFigure 5.5 DD General Fault CodesFigure 5.4 CC Memory Fault Codes。
LabVIEW错误代码表
优质文档LabVIEW错误代码表表1 LabVIEW 错误代码〔Error Codes〕的范围 (1)表2 网络〔Networking〕错误代码表 (3)表3 仪器驱动〔Instrument Driver〕错误代码表 (6)表4 VISA错误代码表 (7)表5 报表生成〔Report Generation〕错误代码表 (12)表6 公式翻译器〔Formula Parsing〕错误代码表 (13)表7 数学〔Mathematics〕错误代码表 (14)表8 信号分析工具包〔Signal Processing Toolset〕错误代码表 17 表9 信号分析〔Signal Processing〕错误代码表 (19)表10 逐点分析〔Point By Point〕错误代码表 (24)表11 数据采集〔DAQ〕错误代码表 (25)表12 波形〔Waveform〕错误代码表 (42)表13 Apple Event错误代码表 (43)表14 PPC错误代码表 (44)表15 注册表访问〔Windows Registry Access〕错误代码表 (45)表16 GPIB错误代码表 (46)表17 串口〔Serial〕错误代码表 (48)表18 Windows连接〔Windows Connectivity〕错误代码表 (49)表19 MATLAB节点错误代码表 (50)表20 运行时菜单〔Run-Time Menu〕错误代码表 (51)表21 波形〔Waveform〕错误代码表 (52)表22 SMTP邮件错误代码表 (53)LabVIEW错误代码表表1 LabVIEW 错误代码〔Error Codes〕的范围优质文档LabVIEW错误代码表表2 网络〔Networking〕错误代码表表3 仪器驱动〔Instrument Driver〕错误代码表表4 VISA错误代码表表5 报表生成〔Report Generation〕错误代码表表6 公式翻译器〔Formula Parsing〕错误代码表表7 数学〔Mathematics〕错误代码表LabVIEW错误代码表表8 信号分析工具包〔Signal Processing Toolset〕错误代码表优质文档LabVIEW错误代码表表9 信号分析〔Signal Processing〕错误代码表表10 逐点分析〔Point By Point〕错误代码表表11 数据采集〔DAQ〕错误代码表表12 波形〔Waveform〕错误代码表表13 Apple Event错误代码表表14 PPC错误代码表表15 注册表访问〔Windows Registry Access〕错误代码表表16 GPIB错误代码表优质文档表17 串口〔Serial〕错误代码表表18 Windows连接〔Windows Connectivity〕错误代码表。
num系统参数培训资料3
P32
MAXIMUM PERMISSIBLE ACCELERATION
Type 5 No. of words
Unsigned decimal
64
Configuration of the maximum permissible acceleration for each axis.
The values are expressed in mm/min for linear axes and deg/min for rotary axes. The speeds can be modulated by the feed potentiometer.
Slow jog
Word N0
Normal jog
N1
Rapid jog
N2
Security speed for linear axes N3
Security speed for rotary axes N4
Automation Business / Num
Machine processor program
%W4.2 %W4.1
1
0
0
0
0
1
1
1
Maximum speed when %W4.7 = 1
31
24 23
16 15
87
0
For a displacement ordered in + direction, I send a reference +
CNC +
+ DIRECTION Increasing measurement
Indradrive 系列 故障代码
Error MessagesF9001 Error internal function call.F9002 Error internal RTOS function callF9003 WatchdogF9004 Hardware trapF8000 Fatal hardware errorF8010 Autom. commutation: Max. motion range when moving back F8011 Commutation offset could not be determinedF8012 Autom. commutation: Max. motion rangeF8013 Automatic commutation: Current too lowF8014 Automatic commutation: OvercurrentF8015 Automatic commutation: TimeoutF8016 Automatic commutation: Iteration without resultF8017 Automatic commutation: Incorrect commutation adjustment F8018 Device overtemperature shutdownF8022 Enc. 1: Enc. signals incorr. (can be cleared in ph. 2) F8023 Error mechanical link of encoder or motor connectionF8025 Overvoltage in power sectionF8027 Safe torque off while drive enabledF8028 Overcurrent in power sectionF8030 Safe stop 1 while drive enabledF8042 Encoder 2 error: Signal amplitude incorrectF8057 Device overload shutdownF8060 Overcurrent in power sectionF8064 Interruption of motor phaseF8067 Synchronization PWM-Timer wrongF8069 +/-15Volt DC errorF8070 +24Volt DC errorF8076 Error in error angle loopF8078 Speed loop error.F8079 Velocity limit value exceededF8091 Power section defectiveF8100 Error when initializing the parameter handlingF8102 Error when initializing power sectionF8118 Invalid power section/firmware combinationF8120 Invalid control section/firmware combinationF8122 Control section defectiveF8129 Incorrect optional module firmwareF8130 Firmware of option 2 of safety technology defectiveF8133 Error when checking interrupting circuitsF8134 SBS: Fatal errorF8135 SMD: Velocity exceededF8140 Fatal CCD error.F8201 Safety command for basic initialization incorrectF8203 Safety technology configuration parameter invalidF8813 Connection error mains chokeF8830 Power section errorF8838 Overcurrent external braking resistorF7010 Safely-limited increment exceededF7011 Safely-monitored position, exceeded in pos. DirectionF7012 Safely-monitored position, exceeded in neg. DirectionF7013 Safely-limited speed exceededF7020 Safe maximum speed exceededF7021 Safely-limited position exceededF7030 Position window Safe stop 2 exceededF7031 Incorrect direction of motionF7040 Validation error parameterized - effective thresholdF7041 Actual position value validation errorF7042 Validation error of safe operation modeF7043 Error of output stage interlockF7050 Time for stopping process exceeded8.3.15 F7051 Safely-monitored deceleration exceeded (159)8.4 Travel Range Errors (F6xxx) (161)8.4.1 Behavior in the Case of Travel Range Errors (161)8.4.2 F6010 PLC Runtime Error (162)8.4.3 F6024 Maximum braking time exceeded (163)8.4.4 F6028 Position limit value exceeded (overflow) (164)8.4.5 F6029 Positive position limit exceeded (164)8.4.6 F6030 Negative position limit exceeded (165)8.4.7 F6034 Emergency-Stop (166)8.4.8 F6042 Both travel range limit switches activated (167)8.4.9 F6043 Positive travel range limit switch activated (167)8.4.10 F6044 Negative travel range limit switch activated (168)8.4.11 F6140 CCD slave error (emergency halt) (169)8.5 Interface Errors (F4xxx) (169)8.5.1 Behavior in the Case of Interface Errors (169)8.5.2 F4001 Sync telegram failure (170)8.5.3 F4002 RTD telegram failure (171)8.5.4 F4003 Invalid communication phase shutdown (172)8.5.5 F4004 Error during phase progression (172)8.5.6 F4005 Error during phase regression (173)8.5.7 F4006 Phase switching without ready signal (173)8.5.8 F4009 Bus failure (173)8.5.9 F4012 Incorrect I/O length (175)8.5.10 F4016 PLC double real-time channel failure (176)8.5.11 F4017 S-III: Incorrect sequence during phase switch (176)8.5.12 F4034 Emergency-Stop (177)8.5.13 F4140 CCD communication error (178)8.6 Non-Fatal Safety Technology Errors (F3xxx) (178)8.6.1 Behavior in the Case of Non-Fatal Safety Technology Errors (178)8.6.2 F3111 Refer. missing when selecting safety related end pos (179)8.6.3 F3112 Safe reference missing (179)8.6.4 F3115 Brake check time interval exceeded (181)Troubleshooting Guide | Rexroth IndraDrive Electric Drivesand ControlsI Bosch Rexroth AG VII/XXIITable of ContentsPage8.6.5 F3116 Nominal load torque of holding system exceeded (182)8.6.6 F3117 Actual position values validation error (182)8.6.7 F3122 SBS: System error (183)8.6.8 F3123 SBS: Brake check missing (184)8.6.9 F3130 Error when checking input signals (185)8.6.10 F3131 Error when checking acknowledgment signal (185)8.6.11 F3132 Error when checking diagnostic output signal (186)8.6.12 F3133 Error when checking interrupting circuits (187)8.6.13 F3134 Dynamization time interval incorrect (188)8.6.14 F3135 Dynamization pulse width incorrect (189)8.6.15 F3140 Safety parameters validation error (192)8.6.16 F3141 Selection validation error (192)8.6.17 F3142 Activation time of enabling control exceeded (193)8.6.18 F3143 Safety command for clearing errors incorrect (194)8.6.19 F3144 Incorrect safety configuration (195)8.6.20 F3145 Error when unlocking the safety door (196)8.6.21 F3146 System error channel 2 (197)8.6.22 F3147 System error channel 1 (198)8.6.23 F3150 Safety command for system start incorrect (199)8.6.24 F3151 Safety command for system halt incorrect (200)8.6.25 F3152 Incorrect backup of safety technology data (201)8.6.26 F3160 Communication error of safe communication (202)8.7 Non-Fatal Errors (F2xxx) (202)8.7.1 Behavior in the Case of Non-Fatal Errors (202)8.7.2 F2002 Encoder assignment not allowed for synchronization (203)8.7.3 F2003 Motion step skipped (203)8.7.4 F2004 Error in MotionProfile (204)8.7.5 F2005 Cam table invalid (205)8.7.6 F2006 MMC was removed (206)8.7.7 F2007 Switching to non-initialized operation mode (206)8.7.8 F2008 RL The motor type has changed (207)8.7.9 F2009 PL Load parameter default values (208)8.7.10 F2010 Error when initializing digital I/O (-> S-0-0423) (209)8.7.11 F2011 PLC - Error no. 1 (210)8.7.12 F2012 PLC - Error no. 2 (210)8.7.13 F2013 PLC - Error no. 3 (211)8.7.14 F2014 PLC - Error no. 4 (211)8.7.15 F2018 Device overtemperature shutdown (211)8.7.16 F2019 Motor overtemperature shutdown (212)8.7.17 F2021 Motor temperature monitor defective (213)8.7.18 F2022 Device temperature monitor defective (214)8.7.19 F2025 Drive not ready for control (214)8.7.20 F2026 Undervoltage in power section (215)8.7.21 F2027 Excessive oscillation in DC bus (216)8.7.22 F2028 Excessive deviation (216)8.7.23 F2031 Encoder 1 error: Signal amplitude incorrect (217)VIII/XXII Bosch Rexroth AG | Electric Drivesand ControlsRexroth IndraDrive | Troubleshooting GuideTable of ContentsPage8.7.24 F2032 Validation error during commutation fine adjustment (217)8.7.25 F2033 External power supply X10 error (218)8.7.26 F2036 Excessive position feedback difference (219)8.7.27 F2037 Excessive position command difference (220)8.7.28 F2039 Maximum acceleration exceeded (220)8.7.29 F2040 Device overtemperature 2 shutdown (221)8.7.30 F2042 Encoder 2: Encoder signals incorrect (222)8.7.31 F2043 Measuring encoder: Encoder signals incorrect (222)8.7.32 F2044 External power supply X15 error (223)8.7.33 F2048 Low battery voltage (224)8.7.34 F2050 Overflow of target position preset memory (225)8.7.35 F2051 No sequential block in target position preset memory (225)8.7.36 F2053 Incr. encoder emulator: Pulse frequency too high (226)8.7.37 F2054 Incr. encoder emulator: Hardware error (226)8.7.38 F2055 External power supply dig. I/O error (227)8.7.39 F2057 Target position out of travel range (227)8.7.40 F2058 Internal overflow by positioning input (228)8.7.41 F2059 Incorrect command value direction when positioning (229)8.7.42 F2063 Internal overflow master axis generator (230)8.7.43 F2064 Incorrect cmd value direction master axis generator (230)8.7.44 F2067 Synchronization to master communication incorrect (231)8.7.45 F2068 Brake error (231)8.7.46 F2069 Error when releasing the motor holding brake (232)8.7.47 F2074 Actual pos. value 1 outside absolute encoder window (232)8.7.48 F2075 Actual pos. value 2 outside absolute encoder window (233)8.7.49 F2076 Actual pos. value 3 outside absolute encoder window (234)8.7.50 F2077 Current measurement trim wrong (235)8.7.51 F2086 Error supply module (236)8.7.52 F2087 Module group communication error (236)8.7.53 F2100 Incorrect access to command value memory (237)8.7.54 F2101 It was impossible to address MMC (237)8.7.55 F2102 It was impossible to address I2C memory (238)8.7.56 F2103 It was impossible to address EnDat memory (238)8.7.57 F2104 Commutation offset invalid (239)8.7.58 F2105 It was impossible to address Hiperface memory (239)8.7.59 F2110 Error in non-cyclical data communic. of power section (240)8.7.60 F2120 MMC: Defective or missing, replace (240)8.7.61 F2121 MMC: Incorrect data or file, create correctly (241)8.7.62 F2122 MMC: Incorrect IBF file, correct it (241)8.7.63 F2123 Retain data backup impossible (242)8.7.64 F2124 MMC: Saving too slowly, replace (243)8.7.65 F2130 Error comfort control panel (243)8.7.66 F2140 CCD slave error (243)8.7.67 F2150 MLD motion function block error (244)8.7.68 F2174 Loss of motor encoder reference (244)8.7.69 F2175 Loss of optional encoder reference (245)Troubleshooting Guide | Rexroth IndraDrive Electric Drivesand Controls| Bosch Rexroth AG IX/XXIITable of ContentsPage8.7.70 F2176 Loss of measuring encoder reference (246)8.7.71 F2177 Modulo limitation error of motor encoder (246)8.7.72 F2178 Modulo limitation error of optional encoder (247)8.7.73 F2179 Modulo limitation error of measuring encoder (247)8.7.74 F2190 Incorrect Ethernet configuration (248)8.7.75 F2260 Command current limit shutoff (249)8.7.76 F2270 Analog input 1 or 2, wire break (249)8.7.77 F2802 PLL is not synchronized (250)8.7.78 F2814 Undervoltage in mains (250)8.7.79 F2815 Overvoltage in mains (251)8.7.80 F2816 Softstart fault power supply unit (251)8.7.81 F2817 Overvoltage in power section (251)8.7.82 F2818 Phase failure (252)8.7.83 F2819 Mains failure (253)8.7.84 F2820 Braking resistor overload (253)8.7.85 F2821 Error in control of braking resistor (254)8.7.86 F2825 Switch-on threshold braking resistor too low (255)8.7.87 F2833 Ground fault in motor line (255)8.7.88 F2834 Contactor control error (256)8.7.89 F2835 Mains contactor wiring error (256)8.7.90 F2836 DC bus balancing monitor error (257)8.7.91 F2837 Contactor monitoring error (257)8.7.92 F2840 Error supply shutdown (257)8.7.93 F2860 Overcurrent in mains-side power section (258)8.7.94 F2890 Invalid device code (259)8.7.95 F2891 Incorrect interrupt timing (259)8.7.96 F2892 Hardware variant not supported (259)8.8 SERCOS Error Codes / Error Messages of Serial Communication (259)9 Warnings (Exxxx) (263)9.1 Fatal Warnings (E8xxx) (263)9.1.1 Behavior in the Case of Fatal Warnings (263)9.1.2 E8025 Overvoltage in power section (263)9.1.3 E8026 Undervoltage in power section (264)9.1.4 E8027 Safe torque off while drive enabled (265)9.1.5 E8028 Overcurrent in power section (265)9.1.6 E8029 Positive position limit exceeded (266)9.1.7 E8030 Negative position limit exceeded (267)9.1.8 E8034 Emergency-Stop (268)9.1.9 E8040 Torque/force actual value limit active (268)9.1.10 E8041 Current limit active (269)9.1.11 E8042 Both travel range limit switches activated (269)9.1.12 E8043 Positive travel range limit switch activated (270)9.1.13 E8044 Negative travel range limit switch activated (271)9.1.14 E8055 Motor overload, current limit active (271)9.1.15 E8057 Device overload, current limit active (272)X/XXII Bosch Rexroth AG | Electric Drivesand ControlsRexroth IndraDrive | Troubleshooting GuideTable of ContentsPage9.1.16 E8058 Drive system not ready for operation (273)9.1.17 E8260 Torque/force command value limit active (273)9.1.18 E8802 PLL is not synchronized (274)9.1.19 E8814 Undervoltage in mains (275)9.1.20 E8815 Overvoltage in mains (275)9.1.21 E8818 Phase failure (276)9.1.22 E8819 Mains failure (276)9.2 Warnings of Category E4xxx (277)9.2.1 E4001 Double MST failure shutdown (277)9.2.2 E4002 Double MDT failure shutdown (278)9.2.3 E4005 No command value input via master communication (279)9.2.4 E4007 SERCOS III: Consumer connection failed (280)9.2.5 E4008 Invalid addressing command value data container A (280)9.2.6 E4009 Invalid addressing actual value data container A (281)9.2.7 E4010 Slave not scanned or address 0 (281)9.2.8 E4012 Maximum number of CCD slaves exceeded (282)9.2.9 E4013 Incorrect CCD addressing (282)9.2.10 E4014 Incorrect phase switch of CCD slaves (283)9.3 Possible Warnings When Operating Safety Technology (E3xxx) (283)9.3.1 Behavior in Case a Safety Technology Warning Occurs (283)9.3.2 E3100 Error when checking input signals (284)9.3.3 E3101 Error when checking acknowledgment signal (284)9.3.4 E3102 Actual position values validation error (285)9.3.5 E3103 Dynamization failed (285)9.3.6 E3104 Safety parameters validation error (286)9.3.7 E3105 Validation error of safe operation mode (286)9.3.8 E3106 System error safety technology (287)9.3.9 E3107 Safe reference missing (287)9.3.10 E3108 Safely-monitored deceleration exceeded (288)9.3.11 E3110 Time interval of forced dynamization exceeded (289)9.3.12 E3115 Prewarning, end of brake check time interval (289)9.3.13 E3116 Nominal load torque of holding system reached (290)9.4 Non-Fatal Warnings (E2xxx) (290)9.4.1 Behavior in Case a Non-Fatal Warning Occurs (290)9.4.2 E2010 Position control with encoder 2 not possible (291)9.4.3 E2011 PLC - Warning no. 1 (291)9.4.4 E2012 PLC - Warning no. 2 (291)9.4.5 E2013 PLC - Warning no. 3 (292)9.4.6 E2014 PLC - Warning no. 4 (292)9.4.7 E2021 Motor temperature outside of measuring range (292)9.4.8 E2026 Undervoltage in power section (293)9.4.9 E2040 Device overtemperature 2 prewarning (294)9.4.10 E2047 Interpolation velocity = 0 (294)9.4.11 E2048 Interpolation acceleration = 0 (295)9.4.12 E2049 Positioning velocity >= limit value (296)9.4.13 E2050 Device overtemp. Prewarning (297)Troubleshooting Guide | Rexroth IndraDrive Electric Drivesand Controls| Bosch Rexroth AG XI/XXIITable of ContentsPage9.4.14 E2051 Motor overtemp. prewarning (298)9.4.15 E2053 Target position out of travel range (298)9.4.16 E2054 Not homed (300)9.4.17 E2055 Feedrate override S-0-0108 = 0 (300)9.4.18 E2056 Torque limit = 0 (301)9.4.19 E2058 Selected positioning block has not been programmed (302)9.4.20 E2059 Velocity command value limit active (302)9.4.21 E2061 Device overload prewarning (303)9.4.22 E2063 Velocity command value > limit value (304)9.4.23 E2064 Target position out of num. range (304)9.4.24 E2069 Holding brake torque too low (305)9.4.25 E2070 Acceleration limit active (306)9.4.26 E2074 Encoder 1: Encoder signals disturbed (306)9.4.27 E2075 Encoder 2: Encoder signals disturbed (307)9.4.28 E2076 Measuring encoder: Encoder signals disturbed (308)9.4.29 E2077 Absolute encoder monitoring, motor encoder (encoder alarm) (308)9.4.30 E2078 Absolute encoder monitoring, opt. encoder (encoder alarm) (309)9.4.31 E2079 Absolute enc. monitoring, measuring encoder (encoder alarm) (309)9.4.32 E2086 Prewarning supply module overload (310)9.4.33 E2092 Internal synchronization defective (310)9.4.34 E2100 Positioning velocity of master axis generator too high (311)9.4.35 E2101 Acceleration of master axis generator is zero (312)9.4.36 E2140 CCD error at node (312)9.4.37 E2270 Analog input 1 or 2, wire break (312)9.4.38 E2802 HW control of braking resistor (313)9.4.39 E2810 Drive system not ready for operation (314)9.4.40 E2814 Undervoltage in mains (314)9.4.41 E2816 Undervoltage in power section (314)9.4.42 E2818 Phase failure (315)9.4.43 E2819 Mains failure (315)9.4.44 E2820 Braking resistor overload prewarning (316)9.4.45 E2829 Not ready for power on (316)。
三菱plc错误代码快捷查询
三菱plc错误代码快捷查询为了方便快捷的查询三菱plc错误码，先总结如下：错误编号(D806*)：0000错误讯息：NOERROR--无异常错误发生异常内容及原因：无异常发生方法：请检查主机与I/O扩充机座/模组间连接线连接是否正常错误编号(D8061)：6101错误讯息：PLCHARDWAREERROR(PLC硬体故障)异常内容：PLC停止运转异常内容及原因：RAM错误方法：请检查主机与I/O扩充机座/模组间连接线连接是否正常错误编号(D8061)：6102错误讯息：PLCHARDWAREERROR(PLC硬体故障)异常内容：PLC停止运转异常原因：回路错误方法：请检查主机与I/O扩充机座/模组间连接线连接是否正常错误编号(D8061)：6103错误讯息：PLCHARDWAREERROR(PLC硬体故障)异常内容：PLC停止运转异常内容及原因：I/OBus错误，必须先驱动M8069=ON 才有效方法：请检查主机与I/O扩充机座/模组间连接线连接是否正常错误编号(D8061)：6104错误讯息：PLCHARDWAREERROR(PLC硬体故障)异常内容：PLC停止运转异常原因：I/O扩充机座24V异常，必须先驱动M8069=ON才有效方法：请检查主机与I/O扩充机座/模组间连接线连接是否正常错误编号(D8061)：6105错误讯息：PLCHARDWAREERROR(PLC硬体故障)异常内容：PLC停止运转异常原因：看门狗计时器异常方法：请检查主机与I/O扩充机座/模组间连接线连接是否正常错误编号(D8062)：6201错误讯息：PLC/PPCOMMUNICATIONERROR(PLC/书写器通信异常)错误内容：Parity/FrameError方法：请检查主机与20P或PC间连接是否正常错误编号(D8062)：6202错误讯息：PLC/PPCOMMUNICATIONERROR(PLC/书写器通信异常)错误内容：通信字句异常方法：请检查主机与20P或PC间连接是否正常错误编号(D8062)：6203错误讯息：PLC/PPCOMMUNICATIONERROR(PLC/书写器通信异常)错误内容：通信资料总合检查不一致方法：请检查主机与20P或PC间连接是否正常错误编号(D8062)：6204错误讯息：PLC/PPCOMMUNICATIONERROR(PLC/书写器通信异常)错误内容：通信字串异常方法：请检查主机与20P或PC间连接是否正常错误编号(D8062)：6205错误讯息：PLC/PPCOMMUNICATIONERROR(PLC/书写器通信异常)错误内容：通信指令异常方法：请检查主机与20P或PC间连接是否正常错误编号(D8063)：6301错误讯息：PARALLELLINKERROR(并列运转通信异常) 错误内容：Parity/FrameError方法：两台PLC的电源是否开着,主机与并列运转模组间的连接线是否正确连接着。
WinInet错误代码（12001到12156）
WinInet错误代码（12001到12156）在 Microsoft Win 32 Internet (WinInet) API 提供具有轻松访问的独⽴应⽤程序以标准的 Internet 协议（例如 Gopher、 FTP 和 HTTP。
WinInet API 提取到 Win 32 开发⼈员所熟悉的⾼级别接⼝的协议。
以下是 WinInet 函数返回的错误代码的列表：Code Error Message and Description----- -----------------------------12001 ERROR_INTERNET_OUT_OF_HANDLESNo more handles could be generated at this time.12002 ERROR_INTERNET_TIMEOUTThe request has timed out.12003 ERROR_INTERNET_EXTENDED_ERRORAn extended error was returned from the server. This istypically a string or buffer containing a verbose errormessage. Call InternetGetLastResponseInfo to retrieve theerror text.12004 ERROR_INTERNET_INTERNAL_ERRORAn internal error has occurred.12005 ERROR_INTERNET_INVALID_URLThe URL is invalid.12006 ERROR_INTERNET_UNRECOGNIZED_SCHEMEThe URL scheme could not be recognized or is not supported.12007 ERROR_INTERNET_NAME_NOT_RESOLVEDThe server name could not be resolved.12008 ERROR_INTERNET_PROTOCOL_NOT_FOUNDThe requested protocol could not be located.12009 ERROR_INTERNET_INVALID_OPTIONA request to InternetQueryOption or InternetSetOptionspecified an invalid option value.12010 ERROR_INTERNET_BAD_OPTION_LENGTHThe length of an option supplied to InternetQueryOption orInternetSetOption is incorrect for the type of optionspecified.12011 ERROR_INTERNET_OPTION_NOT_SETTABLEThe request option cannot be set, only queried.12012 ERROR_INTERNET_SHUTDOWNThe Win32 Internet function support is being shut down orunloaded.12013 ERROR_INTERNET_INCORRECT_USER_NAMEThe request to connect and log on to an FTP server couldnot be completed because the supplied user name isincorrect.12014 ERROR_INTERNET_INCORRECT_PASSWORDThe request to connect and log on to an FTP server couldnot be completed because the supplied password isincorrect.12015 ERROR_INTERNET_LOGIN_FAILUREThe request to connect to and log on to an FTP serverfailed.12016 ERROR_INTERNET_INVALID_OPERATIONThe requested operation is invalid.12017 ERROR_INTERNET_OPERATION_CANCELLEDThe operation was canceled, usually because the handle onwhich the request was operating was closed before theoperation completed.12018 ERROR_INTERNET_INCORRECT_HANDLE_TYPEThe type of handle supplied is incorrect for thisoperation.12019 ERROR_INTERNET_INCORRECT_HANDLE_STATEThe requested operation cannot be carried out because thehandle supplied is not in the correct state.12020 ERROR_INTERNET_NOT_PROXY_REQUESTThe request cannot be made via a proxy.12021 ERROR_INTERNET_REGISTRY_VALUE_NOT_FOUND A required registry value could not be located.12022 ERROR_INTERNET_BAD_REGISTRY_PARAMETERA required registry value was located but is an incorrecttype or has an invalid value.12023 ERROR_INTERNET_NO_DIRECT_ACCESSDirect network access cannot be made at this time.12024 ERROR_INTERNET_NO_CONTEXTAn asynchronous request could not be made because a zero context value was supplied.12025 ERROR_INTERNET_NO_CALLBACKAn asynchronous request could not be made because acallback function has not been set.12026 ERROR_INTERNET_REQUEST_PENDINGThe required operation could not be completed because one or more requests are pending.12027 ERROR_INTERNET_INCORRECT_FORMATThe format of the request is invalid.12028 ERROR_INTERNET_ITEM_NOT_FOUNDThe requested item could not be located.12029 ERROR_INTERNET_CANNOT_CONNECTThe attempt to connect to the server failed.12030 ERROR_INTERNET_CONNECTION_ABORTEDThe connection with the server has been terminated.12031 ERROR_INTERNET_CONNECTION_RESETThe connection with the server has been reset.12032 ERROR_INTERNET_FORCE_RETRYCalls for the Win32 Internet function to redo the request.12033 ERROR_INTERNET_INVALID_PROXY_REQUESTThe request to the proxy was invalid.12036 ERROR_INTERNET_HANDLE_EXISTSThe request failed because the handle already exists.12037 ERROR_INTERNET_SEC_CERT_DATE_INVALIDSSL certificate date that was received from the server isbad. The certificate is expired.12038 ERROR_INTERNET_SEC_CERT_CN_INVALIDSSL certificate common name (host name field) is incorrect. For example, if you entered and the common name on the certificate says .12039 ERROR_INTERNET_HTTP_TO_HTTPS_ON_REDIRThe application is moving from a non-SSL to an SSLconnection because of a redirect.12040 ERROR_INTERNET_HTTPS_TO_HTTP_ON_REDIRThe application is moving from an SSL to an non-SSLconnection because of a redirect.12041 ERROR_INTERNET_MIXED_SECURITYIndicates that the content is not entirely secure. Some ofthe content being viewed may have come from unsecuredservers.12042 ERROR_INTERNET_CHG_POST_IS_NON_SECUREThe application is posting and attempting to changemultiple lines of text on a server that is not secure.12043 ERROR_INTERNET_POST_IS_NON_SECUREThe application is posting data to a server that is notsecure.12110 ERROR_FTP_TRANSFER_IN_PROGRESSThe requested operation cannot be made on the FTP session handle because an operation is already in progress.12111 ERROR_FTP_DROPPEDThe FTP operation was not completed because the session was aborted.12130 ERROR_GOPHER_PROTOCOL_ERRORAn error was detected while parsing data returned from thegopher server.12131 ERROR_GOPHER_NOT_FILEThe request must be made for a file locator.12132 ERROR_GOPHER_DATA_ERRORAn error was detected while receiving data from the gopherserver.12133 ERROR_GOPHER_END_OF_DATAThe end of the data has been reached.12134 ERROR_GOPHER_INVALID_LOCATORThe supplied locator is not valid.12135 ERROR_GOPHER_INCORRECT_LOCATOR_TYPEThe type of the locator is not correct for this operation.12136 ERROR_GOPHER_NOT_GOPHER_PLUSThe requested operation can only be made against a Gopher+ server or with a locator that specifies a Gopher+operation.12137 ERROR_GOPHER_ATTRIBUTE_NOT_FOUNDThe requested attribute could not be located.12138 ERROR_GOPHER_UNKNOWN_LOCATORThe locator type is unknown.12150 ERROR_HTTP_HEADER_NOT_FOUNDThe requested header could not be located.12151 ERROR_HTTP_DOWNLEVEL_SERVERThe server did not return any headers.12152 ERROR_HTTP_INVALID_SERVER_RESPONSEThe server response could not be parsed.12153 ERROR_HTTP_INVALID_HEADERThe supplied header is invalid.12154 ERROR_HTTP_INVALID_QUERY_REQUESTThe request made to HttpQueryInfo is invalid.12155 ERROR_HTTP_HEADER_ALREADY_EXISTSThe header could not be added because it already exists.12156 ERROR_HTTP_REDIRECT_FAILEDThe redirection failed because either the scheme changed(for example, HTTP to FTP) or all attempts made to redirectfailed (default is five attempts).。
error
2010-8-30 12:15:46[9312322]: socket error:10104
2010-8-30 12:15:46[9312326]: socket error:10104
2010-8-30 12:15:46[9312331]: socket error:10104
2010-8-30 12:15:46[9312231]: socket error:10104
2010-8-30 12:15:46[9312236]: socket error:10104
2010-8-30 12:15:46[9312240]: socket error:10104
2010-8-30 12:15:46[9312244]: socket error:10104
2010-8-30 12:15:46[9312113]: socket error:10104
2010-8-30 12:15:46[9312117]: socket error:10104
2010-8-30 12:15:46[9312122]: socket error:10104
2010-8-30 12:15:46[9312126]: socket error:10104
2010-8-30 12:15:46[9312387]: socket error:10104
2010-8-30 12:15:46[9312391]: socket error:10104
2010-8-30 12:15:46[9312396]: socket error:10104
2010-8-30 12:15:46[9312400]: socket error:10104
编译错误代码中英对照
error103：Integerorrealvariableexpected缺整型或实型变量
error104：Ordinalvariableexpected缺有序类型变量
error105：INelidentifierexpected缺标号标识符
error36：BEGINexpected缺BEGIN
error37：ENDexpected缺END
error38：Integerexpressionexpected缺整型表达式
error39：Ordinalexpressionexpected缺有序类型表达式
error31：Constantexpected缺常量
error32：Integerorrealconstantexpected缺整型或实型常量
error33：PointerTypeidentifierexpected缺指针类型标识符
error34：Invalidfunctionresulttype无效的函数结果类型
error78：Pointerexpressionexpected缺指针表达式
error79：Integerorrealexpressionexpected缺整型或实型表达式
error80：Labelnotwithincurrentblock标号不在当前块内
error81：Labelalreadydefined标号已定义
error113：Errorinstatement表达式错误
error114：Cannotcallaninterruptprocedure不能调用中断过程
error116：Mustbein8087modetocompilethis必须在8087模式编译
error code错误代码含义查询
error code（错误代码）=0是操作成功完成。
error code（错误代码）=1是功能错误。
error code（错误代码）=2是系统找不到指定的文件。
error code（错误代码）=3是系统找不到指定的路径。
error code（错误代码）=4是系统无法打开文件。
error code（错误代码）=5是拒绝访问。
error code（错误代码）=6是句柄无效。
error code（错误代码）=7是存储控制块被损坏。
error code（错误代码）=8是存储空间不足，无法处理此命令。
error code（错误代码）=9是存储控制块地址无效。
error code（错误代码）=10是环境错误。
error code（错误代码）=11是试图加载格式错误的程序。
error code（错误代码）=12是访问码无效。
error code（错误代码）=13是数据无效。
error code（错误代码）=14是存储器不足，无法完成此操作。
error code（错误代码）=15是系统找不到指定的驱动器。
error code（错误代码）=16是无法删除目录。
error code（错误代码）=17是系统无法将文件移到不同的驱动器。
error code（错误代码）=18是没有更多文件。
error code（错误代码）=19是介质受写入保护。
error code（错误代码）=20是系统找不到指定的设备。
error code（错误代码）=21是设备未就绪。
error code（错误代码）=22是设备不识别此命令。
error code（错误代码）=23是数据错误(循环冗余检查)。
error code（错误代码）=24是程序发出命令，但命令长度不正确。
error code（错误代码）=25是驱动器无法找出磁盘上特定区域或磁道的位置。
error code（错误代码）=26是无法访问指定的磁盘或软盘。
error code（错误代码）=27是驱动器找不到请求的扇区。
伺服驱动器故障代码
SERCOS通讯灯下面图示：在伺服驱动上，SERCOS通讯卡上面三个SERCOS通讯灯的位置。
Rec_T 和Tra_T 灯分别亮成绿色，表示接收和传送。
当SERCOS通讯出现错误，错误灯Error亮起红色。
警告代码名称警告内容n01I²t警告电流极限“I²t 信息”参数设置过大n02制动功率功率极限“最大制动功率”参数设置过大n03跟踪误差跟踪错误极限“跟踪错误”参数设置过大n04监控响应监控应答（fieldbus ）被激活n05主相位主相位丢失“缺少主相位”参数是在单相运转下不能工作n06极限开关1通过软件极限开关1n07极限开关2通过软件极限开关22007.1.29伺服驱动器说明n08伺服任务错误一个错误的伺服任务启动n09无“HOME”参考点伺服程序在没有设置“HOME”参照点的情况下启动n10正极限正极限开关激活n11负极限负极限开关激活n12默认值只对于“HIPERFACE ”电机默认值被装载n13SERCOS接口SERCOS接口没正确连接n14HIPERFACE参考模式当HIPERFACE参考模式激活时尝试复位n15表格错误速度电流表格“INXMODE 35”错误n16...n31保留保留n32硬件测试版本硬件不是一个公开的测试版本A复位数字输入X 的“DIGITAL IN x”复位被激活警告代码错误内容发生原因及纠正错误F01驱动器热接收器过热1.改善通风2.减少motion工作循环F02直流电压超极限1.检查参数“主电源电压”的电流设定2.电源电压太高，使用调压器3.制动功率极限超范围，调整伺服或安装大制动电阻器F03跟踪错误超过极限1.增加Irms或 Ipeak峰值(保持在电机使用范围内)2.SW 斜坡参数设置太大F04反馈信号错误或不正确1.反馈装置有缺陷2.检查“反馈类型”参3.检查反馈线缆和连接F05直流电压比工厂预设值（100V)低F06电机过热1.Irms 或Ipeak 设置2.电机缺陷3.如果电机不热，检查反馈电缆和连接4.减小伺服工作循环5改善电机通风F07内部24V故障退还厂家F08电机速度超过极限1.没正确设置反馈参数2.反馈线不正确3.电机相位接反4.检查“Overspeed”过速度参数正确设置F09只读存储器校验错误退回厂家F10闪存检查错误退回厂家F11电机制动故障1.当制动不存在，制动参数设置为“WITH”2.抱闸有缺陷3.检查电机电源线和接线F12电机相位错误1.电机有缺陷2.检查电机电源线和接线F13驱动器内部温度超级限1.改善通风2.减少伺服工作循环F14驱动器输出使用故障1.检查电机线缆是否损坏或短接2.输出模块过热，改善通风3.内部制动电阻器电路短路或故障当驱动器使能时，没有电或电压太低。
常见的Linux系统错误码（5篇可选）
常见的Linux系统错误码（5篇可选）第一篇：常见的Linux系统错误码常见的Linux系统错误码，即errorno的值EPERM Operation not permitted 操作不许可 ENOENT No such file or directory 无此文件或目录ESRCH No such process 无此过程EINTR Interrupted system call 系统调用被禁止EIO I/O error I/O 错误 ENXIO No such device or address 无此器件或地址E2BIG Arg list too long Arg 列表太长ENOEXEC Exec format error Exec 格式错误EBADF Bad file number 文件数目错误 10 ECHILD No child processes 无子过程 11 EAGAIN Try again 再试一遍 ENOMEM Out of memory 内存溢出 13 EACCES Permission denied 许可拒绝 14 EFAULT Bad address 错误的地址ENOTBLK Block device required 需要块设备16 EBUSY Device or resource busy 设备或资源忙 17 EEXIST File exists 文件存在 EXDEV Cross-device link 跨器链接 19 ENODEV No such device 无此设备ENOTDIR Not a directory 不是一个目录21 EISDIR Is a directory 是一个目录EINVAL Invalid argument 无效的函数自变量23 ENFILE File table overflow 文件表溢出 EMFILE T oo many open files 打开的文件太多 25 ENOTTY Inappropriate ioctl for device 26 ETXTBSY Text file busy 文本文件忙 27 EFBIG File too large 文件太大 ENOSPC No space left on device 磁盘空间不足 29 ESPIPE Illegal seek 不合法的寻找 EROFS Read-only file system 只读文件系统 31 EMLINK Too many links 太多的链接/usr/include/asm-generic/errno-base.h#define EPERM/* Operation not permitted */ #define ENOENT/* No such file or directory */ #define ESRCH/* No such process */ #define EINTR/* Interrupted system call */ #define EIO 5 /* I/O error */ #define ENXIO/* No such device or address */ #define E2BIG/* Argument list too long */ #define ENOEXEC/* Exec format error */ #define EBADF/* Bad file number */ #define ECHILD/* No child processes */ #define EAGAIN/* Try again */ #define ENOMEM/* Out of memory */ #define EACCES/* Permission denied */ #define EFAULT/* Bad address */ #define ENOTBLK/* Block device required */ #define EBUSY/* Device or resource busy */ #define EEXIST/* File exists */ #define EXDEV/* Cross-device link */ #define ENODEV/* No such device */ #define ENOTDIR/* Not a directory */ #define EISDIR/* Is a directory */ #define EINVAL/* Invalid argument */ #define ENFILE/* File table overflow */ #define EMFILE/* Too many open files */ #define ENOTTY/* Not a typewriter */ #define ETXTBSY/* Text file busy */ #define EFBIG/* File too large */ #define ENOSPC/* No space left on device */ #define ESPIPE/* Illegal seek */ #define EROFS/* Read-only file system */ #define EMLINK/* Too many links */ #define EPIPE 32 /* Broken pipe */ #define EDOM/* Math argument out of domain of func */ #define ERANGE /* Math result not representable *//usr/include/asm-generic/errno.h#define EDEADLK/* Resource deadlock would occur */ #define ENAMETOOLONG 36 /* File name too long */ #define ENOLCK /* No record locks available */ #define ENOSYS/* Function not implemented */ #define ENOTEMPTY/* Directory not empty */ #define ELOOP/* Too many symbolic links encountered */ #define EWOULDBLOCK EAGAIN /* Operation would block */ #define ENOMSG/* No message of desired type */ #define EIDRM/* Identifier removed */ #define ECHRNG/* Channel number out of range */ #define EL2NSYNC 45 /* Level 2 not synchronized */ #define EL3HLT/* Level 3 halted */ #define EL3RST/* Level 3 reset */ #define ELNRNG/* Link number out of range */ #define EUNATCH/* Protocol driver not attached */ #define ENOCSI/* No CSI structure available */ #define EL2HLT/* Level 2 halted */ #define EBADE/* Invalid exchange */ #define EBADR/* Invalid request descriptor */ #define EXFULL/* Exchange full */ #define ENOANO/* No anode */ #define EBADRQC/* Invalid request code */ #define EBADSLT/* Invalid slot */ #define EDEADLOCKEDEADLK#define EBFONT/* Bad font file format */ #define ENOSTR/* Device not a stream */ #define ENODATA/* No data available */ #define ETIME/* Timer expired */ #define ENOSR/* Out of streams resources */ #define ENONET/* Machine is not on the network */ #define ENOPKG/* Package not installed */ #define EREMOTE/* Object is remote */ #define ENOLINK/* Link has been severed */ #define EADV/* Advertise error */ #define ESRMNT/* Srmount error */ #define ECOMM/* Communication error on send */ #define EPROTO/* Protocol error */ #define EMULTIHOP/* Multihop attempted */ #define EDOTDOT/* RFS specific error */ #define EBADMSG/* Not a data message */ #define EOVERFLOW/* Value too large for defined data type */ #define ENOTUNIQ 76 /* Name not unique on network */ #define EBADFD/* File descriptor in bad state */ #define EREMCHG/* Remote address changed */ #define ELIBACC/* Can not access a needed shared library */ #define ELIBBAD /* Accessing a corrupted shared library */ #define ELIBSCN /*.lib section in a.out corrupted */ #define ELIBMAX/* Attempting to link in too many shared libraries */ #define ELIBEXEC 83 /* Cannot exec a shared library directly */ #define EILSEQ/* Illegal byte sequence */ #define ERESTART 85 /* Interrupted system call should be restarted */ #define ESTRPIPE 86 /* Streams pipe error */ #define EUSERS/* Too many users */ #define ENOTSOCK 88 /* Socket operation on non-socket */ #define EDESTADDRREQ 89 /* Destination address required */ #define EMSGSIZE 90 /* Messagetoo long */ #define EPROTOTYPE 91 /* Protocol wrong type for socket */ #define ENOPROTOOPT 92 /* Protocol not available */ #define EPROTONOSUPPORT 93 /* Protocol not supported */ #define ESOCKTNOSUPPORT 94 /* Socket type not supported */ #define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ #define EPFNOSUPPORT 96 /* Protocol family not supported */ #define EAFNOSUPPORT 97 /* Address family not supported by protocol */ #define EADDRINUSE 98 /* Address already in use */ #define EADDRNOTAVAIL 99 /* Cannot assign requested address */ #define ENETDOWN 100 /* Network is down */ #define ENETUNREACH 101 /* Network is unreachable */ #define ENETRESET/* Network dropped connection because of reset */ #define ECONNABORTED 103 /* Software caused connection abort */ #define ECONNRESET 104 /* Connection reset by peer */ #define ENOBUFS/* No buffer space available */ #define EISCONN/* Transport endpoint is already connected */ #define ENOTCONN 107 /* Transport endpoint is not connected */ #define ESHUTDOWN/* Cannot send after transport endpoint shutdown */ #define ETOOMANYREFS 109 /* Too many references: cannot splice */ #define ETIMEDOUT/* Connection timed out */ #define ECONNREFUSED 111 /* Connection refused */ #define EHOSTDOWN/* Host is down */ #define EHOSTUNREACH 113 /* No route to host */ #define EALREADY 114 /* Operation already in progress */ #define EINPROGRESS 115 /* Operation now in progress */ #define ESTALE/* Stale NFS file handle */ #define EUCLEAN/* Structure needs cleaning */ #define ENOTNAM/* Not a XENIX named type file */ #define ENAVAIL/* No XENIX semaphores available */ #define EISNAM/* Is a named type file */ #define EREMOTEIO/* Remote I/O error */ #define EDQUOT/* Quota exceeded */#define ENOMEDIUM 123 /* No medium found */ #define EMEDIUMTYPE 124 /* Wrong medium type */ #define ECANCELED/* Operation Canceled */ #define ENOKEY 126 /* Required key not available */ #define EKEYEXPIRED 127 /* Key has expired */ #define EKEYREVOKED 128 /* Key has been revoked */ #define EKEYREJECTED 129 /* Key was rejected by service */ /* for robust mutexes */ #define EOWNERDEAD 130 /* Owner died */ #define ENOTRECOVERABLE 131 /* State not recoverable */第二篇：http错误码http 错误代码表所有 HTTP 状态代码及其定义。
GRBL错误代码
GRBL错误代码GRBL Error List"error:1" : _("G-code words consist of a letter and a value. Letter was not found."),"error:2" : _("Numeric value format is not valid or missing an expected value."),"error:3" : _("Grbl '$' system command was not recognized or supported."),"error:4" : _("Negative value received for an expected positive value."),"error:5" : _("Homing cycle is not enabled via settings."),"error:6" : _("Minimum step pulse time must be greater than 3usec"),"error:7" : _("EEPROM read failed. Reset and restored to default values."),"error:8" : _("Grbl '$' command cannot be used unless Grbl is IDLE. Ensures smooth operation during a job."),"error:9" : _("G-code locked out during alarm or jog state"),"error:10" : _("Soft limits cannot be enabled without homing also enabled."),"error:11" : _("Max characters per line exceeded. Line was not processed and executed."),"error:12" : _("(Compile Option) Grbl '$' setting value exceeds the maximum step rate supported."),"error:13" : _("Safety door detected as opened and door state initiated."),"error:14" : _("(Grbl-Mega Only) Build info or startup line exceeded EEPROM line length limit."),"error:15" : _("Jog target exceeds machine travel. Command ignored."),"error:16" : _("Jog command with no '=' or contains prohibited g-code."),"error:20" : _("Unsupported or invalid g-code command found in block."),"error:21" : _("More than one g-code command from same modal group found in block."),"error:22" : _("Feed rate has not yet been set or is undefined."),"error:23" : _("G-code command in block requires an integer value."),"error:24" : _("Two G-code commands that both require the use of the XYZ axis words were detected in the block."),"error:25" : _("A G-code word was repeated in the block."),"error:26" : _("A G-code command implicitly or explicitly requires XYZ axis words in the block, but none were detected."),"error:27" : _("N line number value is not within the valid range of 1 - 9,999,999."),"error:28" : _("A G-code command was sent, but is missing some required P or L value words in the line."),"error:29" : _("Grbl supports six work coordinate systems G54-G59. G59.1, G59.2, and G59.3 are not supported."),"error:30" : _("The G53 G-code command requires either a G0 seek or G1 feed motion mode to be active. A different motion was active."), "error:31" : _("There are unused axis words in the block and G80 motion mode cancel is active."),"error:32" : _("A G2 or G3 arc was commanded but there are no XYZ axis words in the selected plane to trace the arc."),"error:33" : _("The motion command has an invalid target. G2, G3, and G38.2 generates this error, if the arc is impossible to generate or if the probe target is the current position."),"error:34" : _("A G2 or G3 arc, traced with the radius definition, had a mathematical error when computing the arc geometry. Try either breaking up the arc into semi-circles or quadrants, or redefine them with the arc offset definition."),"error:35" : _("A G2 or G3 arc, traced with the offset definition, is missing the IJK offset word in the selected plane to trace the arc."), "error:36" : _("There are unused, leftover G-code words that aren't used by any command in the block."),"error:37" : _("The G43.1 dynamic tool length offset command cannot apply an offset to an axis other than its configured axis. The Grbl default axis is the Z-axis."),"error:38" : _("An invalid tool number sent to the parser"),"ALARM:1" : _("Hard limit triggered. Machine position is likely lost due to sudden and immediate halt. Re-homing is highly recommended."), "ALARM:2" : _("G-code motion target exceeds machine travel. Machine position safely retained. Alarm may be unlocked."), "ALARM:3" : _("Reset while in motion. Grbl cannot guarantee position. Lost steps are likely. Re-homing is highly recommended."), "ALARM:4" : _("Probe fail. The probe is not in the expected initial state before starting probe cycle, where G38.2 and G38.3 is not triggered and G38.4 and G38.5 is triggered."),"ALARM:5" : _("Probe fail. Probe did not contact the workpiece within the programmed travel for G38.2 and G38.4."),"ALARM:6" : _("Homing fail. Reset during active homing cycle."),"ALARM:7" : _("Homing fail. Safety door was opened during active homing cycle."),"ALARM:8" : _("Homing fail. Cycle failed to clear limit switch when pulling off. Try increasing pull-off setting or check wiring."), "ALARM:9" : _("Homing fail. Could not find limit switch within search distance. Defined as 1.5 * max_travel on search and 5 * pulloff on locate phases."),"Hold:0" : _("Hold complete. Ready to resume."),"Hold:1" : _("Hold in-progress. Reset will throw an alarm."),"Door:0" : _("Door closed. Ready to resume."),"Door:1" : _("Machine stopped. Door still ajar. Can't resume until closed."),"Door:2" : _("Door opened. Hold (or parking retract) in-progress. Reset will throw an alarm."), "Door:3" : _("Door closed and resuming. Restoring from park, if applicable. Reset will throw an alarm."),。
(20014)internal error
(20014)internal error（原创实用版）目录1.引言：介绍中文知识类写作助理的任务2.编写：分析所提供文本，提取关键信息，编写概括全文的3.详细写作：根据，具体地写一篇文章4.结论：总结全文，强调中文知识类写作助理的重要性正文中文知识类写作助理在当前的信息社会中扮演着越来越重要的角色。
他们的任务是帮助用户根据所提供的文本，有效地提取关键信息，并以简洁明了的方式呈现给读者。
本文将通过一个具体的例子，展示中文知识类写作助理如何完成这一任务。
首先，我们需要分析所提供的文本，以提取关键信息。
文本：“(20014)internal error”，这是一条计算机编程中的错误信息，表示程序在处理过程中遇到了一个内部错误。
我们需要根据这个错误信息，编写一个概括全文的提纲。
基于这个错误信息，我们可以编写如下提纲：1.引言：介绍 (20014)internal error 错误信息2.错误原因：分析 (20014)internal error 的原因3.解决方案：提出解决 (20014)internal error 的方法4.总结：总结全文，强调解决 (20014)internal error 的重要性接下来，我们将根据这个提纲，具体地写一篇文章。
引言部分，我们可以这样写：“在计算机编程过程中，程序员可能会遇到各种各样的错误，其中 (20014)internal error 是一种常见的内部错误。
本文将分析这种错误的原因，并提出相应的解决方案。
”在错误原因部分，我们可以这样写：“(20014)internal error 通常是由于程序内部的逻辑错误、数据类型不匹配或者内存泄漏等问题导致的。
为了解决这个问题，我们需要仔细检查程序代码，找出可能导致错误的具体原因。
”在解决方案部分，我们可以这样写：“解决 (20014)internal error 的方法有很多，例如修改程序代码中的逻辑错误、正确处理数据类型、释放不再使用的内存等。
quartuserror (199014)
Quartus是一种用于FPGA设计的集成开发环境（IDE），由英特尔公司开发。
在使用Quartus进行FPGA设计的过程中，用户可能会遇到各种错误代码，其中最常见的就是xxx错误代码。
本文将对这一错误代码进行详细介绍，并提供解决办法。
1. 错误代码xxx的意义错误代码xxx通常表示在编译或者仿真过程中出现了一些问题。
这个问题可能涉及到用户的设计文件，也可能是与Quartus本身相关的。
2. 可能引发错误代码xxx的原因2.1 设计文件错误：设计文件中可能存在语法错误、逻辑错误或者其他与设计规范不符的情况，导致无法顺利编译或者仿真。
2.2 Quartus本身的问题：Quartus软件本身可能存在一些Bug或者不稳定的情况，导致出现xxx错误代码。
2.3 其他未知因素：在某些情况下，错误代码xxx的具体原因可能比较复杂，需要进一步的排查和分析。
3. 解决办法3.1 检查设计文件：用户需要仔细检查设计文件，确保其中没有语法错误、逻辑错误等问题。
可以尝试对设计文件进行逐步的简化，以确定具体是哪一部分代码引发了错误代码xxx。
3.2 更新Quartus版本：如果怀疑是Quartus本身的问题，用户可以尝试更新到最新版本的Quartus软件，看是否可以解决这个问题。
3.3 交流技术支持：如果以上方法都无法解决问题，用户可以选择向Quartus冠方或者相关的技术支持渠道寻求帮助。
他们可能会提供一些针对性的解决方案或者建议。
4. 避免错误代码xxx的方法4.1 编写规范的设计代码：在进行FPGA设计的过程中，用户可以遵循一些编码规范，编写清晰、规范的设计代码，以减少出现错误代码xxx 的可能性。
4.2 注意Quartus的稳定性：在使用Quartus软件的过程中，用户可以注意软件的稳定性表现，及时反馈一些异常情况给Quartus冠方，以帮助他们改进软件的质量。
总结：错误代码xxx是Quartus软件中常见的一个错误代码，通常表示在编译或者仿真过程中出现了一些问题。
ORA-01441 Error解决办法
Error MessageORA-01441: column to be modified must be empty to decrease column lengthCause of ErrorYou tried to execute an SQL ALTER TABLE MODIFY statement on a character column to decrease its size, but the column contained data. You can only modify the character column whose values are all NULL.ResolutionThe option(s) to resolve this Oracle error are:Option #1Execute an UPDATE statement to change all values in that column to NULL.Option #2Execute a DELETE statement to remove all rows from the table.For example, if you had a table called suppliers defined as follows:CREATE TABLE suppliers( supplier_id number(5),supplier_name char(100));Then executed an INSERT statement as follows:INSERT into suppliers(supplier_id, supplier_name)VALUES (12345, 'IBM');And you tried to execute the following ALTER TABLE statement:ALTER TABLE suppliersMODIFY supplier_name char(75);You would receive the following error message:You could correct the error with either of the following solutions:Solution #1You can update the supplier_name column to all NULLs. This only works if thesupplier_name field will accept NULL values.UPDATE suppliersSET supplier_name = NULL;Solution #2You can remove all entries from the suppliers table.DELETE FROM suppliers;If you do decide to delete all entries from your suppliers table, you might want to make sure that you have a backup of the data.。
Linux内核错误码大全
#define ENOANO 55 /* No anode */#define EBADRQC 56 /* Invalid request code */#define EBADSLT 57 /* Invalid slot */#define EDEADLOCK EDEADLK#define EBFONT 59 /* Bad font file format */#define ENOSTR 60 /* Device not a stream */#define ENODATA 61 /* No data available */#define ETIME 62 /* Timer expired */#define ENOSR 63 /* Out of streams resources */#define ENONET 64 /* Machine is not on the network */#define ENOPKG 65 /* Package not installed */#define EREMOTE 66 /* Object is remote */#define ENOLINK 67 /* Link has been severed */#define EADV 68 /* Advertise error */#define ESRMNT 69 /* Srmount error */#define ECOMM 70 /* Communication error on send */#define EPROTO 71 /* Protocol error */#define EMULTIHOP 72 /* Multihop attempted */#define EDOTDOT 73 /* RFS specific error */#define EBADMSG 74 /* Not a data message */#define EOVERFLOW 75 /* Value too large for defined data type */#define ENOTUNIQ 76 /* Name not unique on network */#define EBADFD 77 /* File descriptor in bad state */#define EREMCHG 78 /* Remote address changed */#define ELIBACC 79 /* Can not access a needed shared library */#define ELIBBAD 80 /* Accessing a corrupted shared library */#define ELIBSCN 81 /* .lib section in a.out corrupted */#define ELIBMAX 82 /* Attempting to link in too many shared libraries */#define ELIBEXEC 83 /* Cannot exec a shared library directly */#define EILSEQ 84 /* Illegal byte sequence */#define ERESTART 85 /* Interrupted system call should be restarted */#define ESTRPIPE 86 /* Streams pipe error */#define EUSERS 87 /* Too many users */#define ENOTSOCK 88 /* Socket operation on non-socket */#define EDESTADDRREQ 89 /* Destination address required */#define EMSGSIZE 90 /* Message too long */#define EPROTOTYPE 91 /* Protocol wrong type for socket */#define ENOPROTOOPT 92 /* Protocol not available */#define EPROTONOSUPPORT 93 /* Protocol not supported */#define ESOCKTNOSUPPORT 94 /* Socket type not supported */#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */#define EPFNOSUPPORT 96 /* Protocol family not supported */#define EAFNOSUPPORT 97 /* Address family not supported by protocol */#define EADDRINUSE 98 /* Address already in use */#define EADDRNOTAVAIL 99 /* Cannot assign requested address */#define ENETDOWN 100 /* Network is down */#define ENETUNREACH 101 /* Network is unreachable */#define ENETRESET 102 /* Network dropped connection because of reset */ #define ECONNABORTED 103 /* Software caused connection abort */#define ECONNRESET 104 /* Connection reset by peer */#define ENOBUFS 105 /* No buffer space available */#define EISCONN 106 /* Transport endpoint is already connected */#define ENOTCONN 107 /* Transport endpoint is not connected */#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ #define ETOOMANYREFS 109 /* Too many references: cannot splice */#define ETIMEDOUT 110 /* Connection timed out */#define ECONNREFUSED 111 /* Connection refused */#define EHOSTDOWN 112 /* Host is down */#define EHOSTUNREACH 113 /* No route to host */#define EALREADY 114 /* Operation already in progress */#define EINPROGRESS 115 /* Operation now in progress */#define ESTALE 116 /* Stale file handle */#define EUCLEAN 117 /* Structure needs cleaning */#define ENOTNAM 118 /* Not a XENIX named type file */#define ENAVAIL 119 /* No XENIX semaphores available */#define EISNAM 120 /* Is a named type file */#define EREMOTEIO 121 /* Remote I/O error */#define EDQUOT 122 /* Quota exceeded */#define ENOMEDIUM 123 /* No medium found */#define EMEDIUMTYPE 124 /* Wrong medium type */#define ECANCELED 125 /* Operation Canceled */#define ENOKEY 126 /* Required key not available */。
FPGA常用错误
说明：本文内容来自网络1.Error (10028): Can't resolve multiple constant drivers for net ……解析：不能在两个以上always内对同一变量赋值，这个细节一般看书看资料会看到，但是编程时，就是没想到。
2.Error (10158): Verilog HDL Module Declaration error at clkseg.v(1): port "XXXX" is not declared as port解析：大意了，端口类型还没定义啊！3.Error (10110): variable "en" has mixed blocking and nonblocking Procedural Assignments -- must be all blocking or all nonblocking assignments解析:en在程序中有时用非阻塞赋值，有时用阻塞赋值，这是禁止的。
在初学的时候，可能分得不是很清楚，所以在检查时，一定要一步步观察慢慢来。
4.Error (10161): Verilog HDL error at clkseg.v(36): object "count" is not declared解析：这个错误应该很明显啦，只要能读得懂。
5.Error (10170): Verilog HDL syntax error at clkseg.v(37) near text "***"; expecting ";"解析：意思应该也很简单，就是检查的时候要细心点。
6.Error (10171): Verilog HDL syntax error at ir_ctrl.v(149) near end of file ; expecting an identifier, or "endmodule", or a parallel statement解析：最后上了endmodule。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
SogouTSF.ime : Version 7.7.0.6444
tintlgnt.ime : Version 10.1.7600.16385
DDRAW.DLL : Version 6.1.7600.16385
D3D8.DLL : Version 6.1.7600.16385
my doccuments path = C:\Users\Administrator.Sc-201504130834\Documents
user default LCID = 2052
system default langage ID = 2052
system default UI langage = 2052
1280亊 720 256怓
1280亊 720 256怓
1280亊 720 High Color
1280亊 720 High Color
1280亊 720 High Color
1280亊 720 True Color(32bit)
1280亊 720 True Color(32bit)
D3D9.DLL : Version 6.1.7601.17514
DSOUND.DLL : Version 6.1.7600.16385
DSOUND3D.DLL : 澷朄妉庢斉杮崋丅
QUARTZ.DLL : Version 6.6.7601.18741
KOEILW.DLL : 澷朄妉庢斉杮崋丅
320亊 200 256怓
320亊 200 High Color
320亊 200 High Color
320亊 200 High Color
320亊 200 True Color(32bit)
320亊 200 True Color(32bit)
512亊 384 True Color(32bit)
640亊 400 256怓
640亊 400 256怓
640亊 400 256怓
640亊 400 High Color
640亊 400 High Color
640亊 400 High Color
800亊 600 256怓
800亊 600 256怓
800亊 600 High Color
800亊 600 High Color
800亊 600 High Color
800亊 600 True Color(32bit)
800亊 600 True Color(32bit)
1360亊 768 High Color
1360亊 768 High Color
1360亊 768 True Color(32bit)
1360亊 768 True Color(32bit)
1360亊 768 True Color(32bit)
1366亊 768 256怓
10 Color Space Converter {1643E180-90F5-11CE-97D5-00AA0055595A}
11 WM ASF Reader {187463A0-5BB7-11D3-ACBE-0080C75E246E}
12 Screen Capture filter {1A56451B-1315-4012-861E-8587333DD631}
2 WMSpeech Decoder DMO
3 MP3 Decoder DMO
4 Mpeg4s Decoder DMO
5 WMV Screen decoder DMO
6 WMVideo Decoder DMO
7 Mpeg43 Decoder DMO
8 Mpeg4 Decoder DMO
9 DV Muxer {129D7E40-C10D-11D0-AFB9-00AA00B67A42}
boot_path:D:\新建文件夹\Saved Games\Nobunagas Ambition Souzou with Power Up Kit\
windows folder path = C:\Windows
temp folder path = C:\Users\Administrator.Sc-201504130834\AppData\Local\Temp\
320亊 240 True Color(32bit)
320亊 240 True Color(32bit)
320亊 240 True Color(32bit)
400亊 300 256怓
400亊 300 256怓
400亊 300 256怓
400亊 300 High Color
320亊 200 True Color(32bit)
320亊 240 256怓
320亊 240 256怓
320亊 240 256怓
320亊 240 High Color
320亊 240 ห้องสมุดไป่ตู้igh Color
320亊 240 High Color
1280亊 600 High Color
1280亊 600 High Color
1280亊 600 True Color(32bit)
1280亊 600 True Color(32bit)
1280亊 600 True Color(32bit)
1280亊 720 256怓
Default DirectSound Device
Default WaveOut Device
DirectSound: 扬声器 (Realtek High Definition Audio)
DirectShow Filter
0 WMAudio Decoder DMO
1 WMAPro over S/PDIF DMO
autholity level --------------------------------
ADMINS
USERS
------------------------------------------------
Microsoft Windows 7 6.1 Service Pack 1 (Build 7601)
phon.ime : Version 10.1.7600.16385
pintlgnt.ime : Version 10.1.7600.16385
qintlgnt.ime : Version 10.1.7600.16385
quick.ime : Version 10.1.7600.16385
640亊 480 High Color
640亊 480 High Color
640亊 480 True Color(32bit)
640亊 480 True Color(32bit)
640亊 480 True Color(32bit)
800亊 600 256怓
512亊 384 256怓
512亊 384 256怓
512亊 384 High Color
512亊 384 High Color
512亊 384 High Color
512亊 384 True Color(32bit)
512亊 384 True Color(32bit)
cintlgnt.ime : Version 10.1.7600.16385
IMJP10.IME : Version 10.1.7601.17514
imkr80.ime : Version 8.1.7601.17514
msctfime.ime : Version 6.1.7600.16385
1366亊 768 High Color
仚 1366亊 768 True Color(32bit)
DLL System Version
KERNEL32.DLL : Version 6.1.7601.18847
NTDLL.DLL : Version 6.1.7601.18933
SHELL32.DLL : Version 6.1.7601.18918
1280亊 768 True Color(32bit)
1280亊 768 True Color(32bit)
1280亊 768 True Color(32bit)
1360亊 768 256怓
1360亊 768 256怓
1360亊 768 256怓
1360亊 768 High Color
COMCTL32.DLL : Version 5.82.7601.18837
GDI32.DLL : Version 6.1.7601.18898
USER32.DLL : Version 6.1.7601.17514
IMM32.DLL : Version 6.1.7601.17514
chajei.ime : Version 10.1.7600.16385
1024亊 768 True Color(32bit)
1024亊 768 True Color(32bit)
1024亊 768 True Color(32bit)
1280亊 600 256怓
1280亊 600 256怓
1280亊 600 256怓
1280亊 600 High Color
400亊 300 High Color
400亊 300 High Color
400亊 300 True Color(32bit)
400亊 300 True Color(32bit)
400亊 300 True Color(32bit)
512亊 384 256怓
800亊 600 True Color(32bit)
1024亊 768 256怓