Ameco Components Repair Capability List说明书

Maintenance Organization Exposition Ameco Components Repair
Capability List
Ameco 附件修理能力清单
Document No.: Ameco-EASA-DOC4
文件号：Ameco-EASA-DOC4
EASA
Foreword
前言
Only those components that are listed in the latest revision of the Capability List, are authorized to be overhauled, repaired, inspected/tested or modified and would be returned to service with EASA Form 1. Any new component can not be returned to service until the capability gets EASA's approval.
The approval for a specific part number is also valid for part numbers with higher dash numbers if the demands to personal qualification, tools and equipment are the same.
只有列在被批准的最新能力清单中的附件可以进行翻修，修理，检测或改装，并使用EASA表格1进行最终放行。

新的附件只能在该能力获得EASA 批准后才能放行。

如果那些具有不同尾号的附件对于人员资格、工具设备的要求是相同的，那么对于其中某一个件号的批准同样适用于其它尾号的件号。

Definition of Abbreviation Used
缩略语定义
MAINTENANCE LEVEL 维修级别：
O=Overhauled 翻修
R=Repaired 修理
I=Inspected/Tested 检测
M=Modified 改装
EASA RATING 类别：
C1 Air Cond & Press
C2 Auto Flight
C3 Comms and Nav
C4 Doors Hatches
C5 Electrical Power & Lights
C6 Equipment
C7 Engine APU
C8 Flight Controls
C9 Fuel
C10 Helicopters Rotors
C11 Helicopter Trans
C12 Hydraulic Power
C13 Indicating/Recording Systems C14 Landing Gear
C15 Oxygen
C16 Propellers
C17 Pneumatic & Vacuum
C18 Protection ice/rain/fire
C19 Windows
C20 Structural
C21 Water Ballast
C22 Propulsion Augmentation 空调和增压
自动飞行
通讯和导航
舱门和舱口
电源和灯
设备
发动机-APU
飞行控制
燃油
直升机-旋翼
直升机-转动
液压源
指示和记录系统起落架
氧气
螺旋桨
气源和真空系统防冰/雨/火
窗户
结构
水压舱物
增推系统
Record of Revision
改版记录
The revision of Ameco Component Repair Capability List has been inserted by QS and the record of revision is as follows:
Ameco附件修理能力清单的改版已由QS插入，改版记录如下：
Rev No. Issued Date Inserted by Rev No. Issued Date Inserted by
0 Mar.15.2002 QC-L 21 Apr. 14, 2014 QM-L
1 Sep.25.200
2 QC-L 22 May 12, 2015 QM-L
2 Oct.18.2002 QC-L 2
3 Mar. 23, 2016 QM-L
3 Feb.12.2003 QC-L 2
4 Oct. 18, 2017 OBQ3
4 Jul.21.2003 QC-L 2
5 Dec. 27, 2017 OBQ3
5 Sep.25.2003 QM-O 2
6 Oct. 29, 2018 OBQ3
6 Apr.16.2004 QM-O 2
7 Feb. 26, 2019 OBQ3
7 Sep.8.2004 QM-O 28 May. 28, 2019 OBQ3
8 Apr.21.2005 QM-O 29 Oct. 21, 2019 OBQ3
9 Jun.15.2005 QM-O 30 Jun. 22, 2020 QS
10 Nov.21.2005 QM-O 31 Aug.12, 2020 QS
11 May.12.2006 QM-O 32 Nov.12, 2020 QS
12 Jun.15.2006 QM-O 33 Feb.07, 2021 QS
13 Sep.21.2006 QM-L 34 May.06, 2021 QS
14 Jun.20,2007 QM-L 35 Aug.04,2021 QS
15 Jun.16,2008 QM-L 36 Nov.01,2021 QS
16 Jun.22,2009 QM-L 37 Feb.08,2022 QS
17 May.17,2010 QM-L 38 May.06,2022 QS
18 Jun.1,2011 QM-L
19 May.16,2012 QM-L
20 May.28,2013 QM-L
Maintenance Organization Exposition
Ameco Components Repair
Capability List
附件修理能力清单
Ameco 附件修理能力清单
北京区域
北京区域
PEK
C1 Rating
Air Conditioning and Pressurization
空调和增压
ITEM CHINESE NOMENCLATURE PN DOC ATA LEVEL RATING MANUFACTURE LIMITATION WORKSHOP 项次中文名称英文名称件号依据文件章节号修理级别类别厂家限制车间
1空调辅助组件AIR COND ACCE UNIT 65-52810-
6/19/25/28/35/37/39/43/46/5
0/57/59/64
CMM21-09-02I,R,M C1BAE SYSTEMS No Limitation 没有限制211#
2流量控制活门FLOW CONTROL
VALVE
396608-1CMM21-10-37I,R,M C1HONEYWELL No Limitation 没有限制213#
33.5英寸直径流量
控制活门
THREE AND ONE-
HALF INCH DIAMETER
FLOW CONTROL
VALVE
396442-1,396498-1/2CMM21-11-07I,R,M,O C1Honeywell No Limitation 没有限制213#
4冲压空气单向阀RAM AIR CHECK
VAVLE
9032-4-1/2/3CMM21-20-01I,R,M,O C1
AERO FLUID
PRODUCTS
No Limitation 没有限制213#
5盥洗室/厨房排气
风扇
LAVATORY/GALLEY
VENT FAN
4100149,4100149A,4100149
B,4100149C
CMM21-20-01I,R,M,O C1
Hamilton
Sundstrand
No Limitation 没有限制211#
6厨房/盥洗室排气
风扇
LAVATORY/GALLEY
VENT FAN
4101054CMM21-20-04I,R,M C1
HAMILTON
SUNDSTRAND
No Limitation 没有限制211#
79英寸混流风扇
组件
9-INCH DIAMETER
MIXED FLOW FAN
ASSEMBLY OUTLINE
4101378,4101378A CMM21-20-06I,R C1
HAMILTON
SUNDSTRAND
"Due to lack of MANDREL
BRE-53830 and SHOE
BRE-53832-8,
ASSEMBLY
section,INSTALL
STATOR ASSEMBLY
(440) IN THE STATOR
HOUSING ASSEMBLY
cannot be performed
由于缺少芯轴BRE-53830
和热靴BRE-53832-8，组
装章节，安装定子组件
（440）到定子壳体组件里
的工作无法执行"
211#
8客舱空气循环风
扇
CABIN AIR
RECIRCULATION
645405-1,645405-2CMM21-20-18I,R,M C1HONEYWELL
"Due to lack of thread
insert repair tool，
REPAIR section，
3.M.(4).(a)/(b) cannot be
performed
由于缺少螺纹衬套修理工
具，修理章节，
3.M.(4).(a)/(b)无法执行"
211#
Ameco Components Repair Capability List Rev./Date: 38/May.06, 2022 附件修理能力清单
(EASA)
1 of 22EASA Capability List R.38
9旋转作动器ROTARY ACTUATOR 6610-20560-01, 6610-20560-
01A, 6610-20560-01 AMDT
A
CMM 21-20-31I,R C1NORD-MICRO无None211#
10混流风扇MIXED FLOW FAN VD3820,VD3820MOD1,VD3
820-01
CMM21-21-11I,R,M,O C1AOA
"Due to lack of cold spray
process, DISASSEMBLY
section, APPLY COLD
SPRAY to the rotor shaft
cannot be performed
由于不具备冷喷涂工艺，
分解章节，给转子轴冷喷
涂无法执行"
211#
11混流风扇MIXED FLOW FAN VD3810CMM21-21-12I,R,M,O C1AOA No Limitation 没有限制211# 12排气风扇EXTRACTION FAN VD3920CMM21-21-14I,R,M,O C1AOA No Limitation 没有限制211# 13排气风扇Extraction Fan VR3910CMM21-21-15I,R,O C1AOA No Limitation 没有限制211#
14再循环风扇RECIRCULATION FAN VD3900-02,VD3900-
03,VD3901-00
CMM21-21-16I,R,M C1AOA No Limitation 没有限制211#
15排气风扇Extraction Fan VA4110CMM21-21-18I,R,O C1AOA No Limitation 没有限制211# 16再循环风扇RECIRCULATION FAN VD3909-00CMM21-21-19I,R C1AOA No Limitation 没有限制211#
17电子排气风扇AVIONICS
EXTRACTION FAN
39280A010001,
39280A020001, AE1609A00,
AE1609A01
CMM21-21-38I,R C1LIEBHERR无None211#
18风扇旁通单向活
门Fan bypass check valve
810205-1, 810205-2,
810205-3
CMM21-22-01I,R,O C1Hamilton
无限制
No Limitation
213#
19再循环风扇FAN-RECIRCULATION39277A010001, 39277A02000CMM21-24-20I,R C1LIEBHERR No Limitation 没有限制211#,116#
2 of 22EASA Capability List R.38
209英寸混流风扇9-INCH DIAMETER
MIXED FLOW FAN
4100943,4100943A,4100943
B,4100943C,4100943D,4102
107,4102107A
CMM21-25-01R,I,M C1
Hamilton
Sundstrand
BRE-53832-8,
ASSEMBLY section,
INSTALL STATOR
ASSEMBLY (440) IN THE
STATOR HOUSING
ASSEMBLY cannot be
performed.
由于缺少MANDREL BRE-
53830和SHOE BRE-
53832-8，组装章节，安装
定子组件（440）到定子壳
体组件的工作无法执行。

"
211#
217.5英寸混流风扇7.5 INCH DIAMETER
MIXED FLOW FAN
4100945,4100945A,4100945
B
CMM21-25-02I,R,M C1
Hamilton
Sundstrand
No Limitation 没有限制211#
22电气风扇ELECTRIC FAN 7010911H03S05,7010911H0
3S06,7010911H04S05,7010
911H04S06,7010911H05S06
CMM21-25-10I,R C1
Hamilton
Sundstrand
No Limitation 没有限制211#
239英寸混流风扇9-INCH DIAMETER
MIXED FLOW FAN
4100941,4100941A,4100941
B,4100941C
CMM21-26-01R,I C1
Hamilton
Sundstrand
"Due to lack of MANDREL
BRE-53830 and SHOE
BRE-53832-8,
ASSEMBLY section,
INSTALL STATOR
ASSEMBLY (440) IN THE
STATOR HOUSING
ASSEMBLY cannot be
performed.
由于缺少MANDREL BRE-
53830和SHOE BRE-
53832-8，组装章节，安装
定子组件（440）到定子壳
体组件的工作无法执行。

"
211#
3 of 22EASA Capability List R.38
249英寸混流风扇9-INCH DIAMETER
MIXED FLOW FAN
4100941D CMM21-26-01I,R,M C1
Hamilton
Sundstrand
BRE-53832-8,
ASSEMBLY section,
INSTALL STATOR
ASSEMBLY (440) IN THE
STATOR HOUSING
ASSEMBLY cannot be
performed.
由于缺少MANDREL BRE-
53830和SHOE BRE-
53832-8，组装章节，安装
定子组件（440）到定子壳
体组件的工作无法执行。

"
211#
259英寸混流风扇9-INCH DIAMETER
MIXED FLOW FAN
4100941A, 4100941B,
4100941C
SB
4100941-
21-06
21-26-01M C1
Hamilton
Sundstrand
由于缺少MANDREL BRE-
53830和SHOE BRE-
53832-8，组装章节，安装
211#
269英寸混流风扇9-INCH DIAMETER
MIXED FLOW FAN
4100941E CMM21-26-01I,R C1
Hamilton
Sundstrand
由于缺少MANDREL BRE-
53830和SHOE BRE-
53832-8，组装章节，安装
211#
27电子设备通风计
算机
AVIONICS
EQUIPMENT
VENTILATION
COMPUTER
785-611-2,785-611-
3,785611-4
CMM21-26-34I,R,M C1
ZODIAC
AEROSPACE
No Limitation 没有限制211#
28航空电子附件通
风计算机
AVIONICS
EQUIPMENT
VENTILATION
COMPUTER
87292325V07CMM21-26-34I,R,M C1THALES No Limitation 没有限制211#
29航空电子附件通
风计算机
AVIONICS
EQUIPMENT
VENTILATION
COMPUTER
87292325V05CMM21-26-34I,R,M C1THALES No Limitation 没有限制211#
30航空电子附件通
风计算机
AVIONICS
EQUIPMENT
VENTILATION
COMPUTER
87292325V06CMM21-26-34I,R,M C1THALES No Limitation 没有限制211#
31航空电子风扇AVIONICS FAN EVT3454G,EVT3454H,EVT3
454HC
CMM21-26-42I,R,M,O C1
SAFRAN
VENTILATION
SYSTEMS
No Limitation 没有限制211#
32航空电子风扇AVIONICS FAN EVT3454J01CMM21-26-45I,R,O C1TECHNOFAN No Limitation 没有限制211#
4 of 22EASA Capability List R.38
33航空电子风扇Avionics Fan EVT3454HM01CMM21-26-47M C1
SAFRAN
VENTILATION
SYSTEMS
No Limitation 没有限制211#
34航空电子风扇AVIONICS FAN EVT3454HM01CMM21-26-47I,R,O C1
SAFRAN
VENTILATION
SYSTEMS
No Limitation 没有限制211#
35单向活门CHECK VALVE CT141,CT141-1CMM21-26-56I,R,M,O C1TECHNOFAN No Limitation 没有限制213#
36风扇FAN CE1909AA1,CE1909AA1AM
DTA
CMM21-26-58I,R,M C1TECHNOFAN
"Due to lack of balancing
tool 4617001532，
REPAIR tool，INSTALL
THE IMPELLER ON THE
SPECIAL TOOL NO.2
cannot be performed
由于缺少平衡工具
4617001532，修理章节，
安装叶轮到特殊工具2号上
的工作无法执行
211#
37设备冷却空气滤EQUIPMENT COOLING
FILTER
P531709AMM21-27-02I,R,M C1DONALDSON No Limitation 没有限制213#
38电气风扇ELECTRIC FAN 7010302H01S01,7010302H0
2S01,7010302H02S02,7010
302H03S02,7010302H01S02
CMM21-27-19I,R C1
Hamilton
Sundstrand
No Limitation 没有限制211#
39电气风扇ELECTRIC FAN 7110501H01S02,7110501H0
2S02
CMM21-27-21I,R C1
Hamilton
Sundstrand
No Limitation 没有限制211#
40涡轮空气流量传
感器
Turbine Wheel Airflow
Sensor
948692-2CMM21-30-54I,R,M C1HONEYWELL No Limitation 没有限制211#
5 of 22EASA Capability List R.38
41压力控制器PRESSURE
CONTROLLER
9022-15702-11CMM21-31-20I,R,M C1NORD-MICRO
"由于未配备相关工具及软
件，不执行CMM21-31-20
修理部分“飞行软件装填工
作”。

Because no relate tools
and software，do not
perform CMM 21-31-20
REPAIR section “
Download of Flight
Software"".
由于未配备相关化工品及
工作环境，不执行
CMM21-31-20修理部份“环
氧底漆及失效黑色漆面修
理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-31-
20 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and
defective black Lacquer
Coating repair”.
211#
6 of 22EASA Capability List R.38
42压力控制器PRESSURE
CONTROLLER
9022-15702-10CMM21-31-20I,R,M C1NORD-MICRO
"由于未配备相关工具及软
件，不执行CMM21-31-20
修理部分“飞行软件装填工
作”。

Because no relate tools
and software，do not
perform CMM 21-31-20
REPAIR section “
Download of Flight
Software"".
由于未配备相关化工品及
工作环境，
不执行CMM21-31-20修理
部份“环氧底漆及失效黑色
漆面修理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-31-
20 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and
defective black Lacquer
Coating repair”."
211#
43压力控制器PRESSURE
CONTROLLER
20791-02AB CMM21-31-21I,R,M C1NORD-MICRO
"由于未配备相关工具，不
执行CMM21-31-21
修理部分“更换失效螺套和
铆钉工作”
Because no relate tools，
do not perform CMM 21-
31-21 REPAIR section “
replacement of defective
inserts and riveted parts ”"
211#
44压力控制器PRESSURE
CONTROLLER
20791-03AB,20791-
12AC,20791-13AC
CMM21-31-21I,R,M C1NORD-MICRO
"由于未配备相关工具，不
执行CMM21-31-21
修理部分“更换失效螺套和
铆钉工作”
Because no relate tools，
do not perform CMM 21-
31-21 REPAIR section “
replacement of defective
inserts and riveted parts ”"
211#
7 of 22EASA Capability List R.38
45压力控制器PRESSURE
CONTROLLER
20791-13AD CMM21-31-21I,R C1NORD-MICRO
"由于未配备相关工具，不
执行CMM21-31-21
修理部分“更换失效螺套和
铆钉工作”
Because no relate tools，
do not perform CMM 21-
31-21 REPAIR section “
replacement of defective
inserts and riveted parts ”"
211#
46外流活门OUT FLOW VALVE 9023-15703-
4,41,6,61,7,71,8,81
CMM21-31-30I,R,M C1NORD-MICRO
"由于未配备相关工具，不
执行CMM21-31-30
修理部分“更换失效螺套”
Because no relate tools，
do not perform CMM 21-
31-30 REPAIR section “
replacement of defective
inserts ”"
211#
47外流活门OUTFLOW VALVE20790-01AA/02AC/03AC CMM21-31-33I,R,M C1NORD-MICRO No Limitation 没有限制211#
48电子盒ELECTRONIC BOX 21071-01AA,21071-01AA
AMDT"A",21071-02AC,
21071-03AC
CMM21-31-35I,R,M C1NORD-MICRO
"由于未配备相关化工品及
工作环境，
不执行CMM21-31-35修理
部份“环氧底漆及失效黑色
漆面修理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-31-
35 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and
defective black Lacquer
Coating repair”."
211#
49座舱释压活门CABIN RELIEF VALVE715995-2/3CMM21-32-01I,R,M,O C1HAMILTON
STANDARD
No Limitation 没有限制213#
8 of 22EASA Capability List R.38
50压力控制器PRESSURE
CONTROLLER
20793-
01AA/02AB/30BA/31BB/40B
A/40BB/41BC
CMM21-32-22I,R,M C1NORD-MICRO
件，不执行CMM21-32-22
修理部分“编程及飞行软件
装填工作”。

Because no relate tools
and software，do not
perform CMM 21-32-22
REPAIR section “
Programming and
Implementation of
applicable Flight S/W”.
由于未配备相关化工品及
工作环境，不执行
CMM21-32-22修理部份“环
氧底漆及失效黑色漆面修
理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-32-
22 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and
defective black Lacquer
Coating repair”."
211#
51压力控制器PRESSURE
CONTROLLER
20793-32BA,20793-
33BB,20793-42BC,20793-
42BD
CMM21-32-22I,R C1MORD-MICRO
"由于未配备相关工具，不
执行CMM21-32-22
修理部分“更换失效螺套和
铆钉工作”
Because no relate tools，
do not perform CMM 21-
32-22 REPAIR section “
replacement of defective
inserts and riveted parts ”"
211#
52外流活门OUTFLOW VALVE 7012-17971/-1/-2/-3/-4
CMM21-32-30R C1NORD-MICRO
执行CMM21-32-30
修理部分“更换失效螺套和
铆钉工作”
Because no relate tools，
do not perform CMM 21-
32-30 REPAIR section “
replacement of defective
inserts and riveted parts ”
由于未配备相关化工品及
工作环境，不执行
CMM21-32-30修理部分“环
氧底漆及失效白色漆面修
理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-32-
30 REPAIR section “
CHEMICAL
CONVERSION AND
EPOXY PRIMER
COATING and
DEFECTIVE WHITE
LACQUER COATING
repair”."
211#
53电子盒ELECTRONIC BOX6331-19428-1/2CMM21-32-32I,R,M C1NORD-MICRO "由于未配备相关化工品及
工作环境，不执行
CMM21-32-32修理部份“环
氧底漆及失效黑色漆面修
理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-32-
32 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and defective black Lacquer
Coating repair”.
由于未配备相关工具，不
执行CMM21-32-32
修理部分“更换失效螺套和
铆钉工作”
Because no relate tools，
do not perform CMM 21-
32-32 REPAIR section “replacement of defective
inserts and riveted parts ”"
211#
54电子盒ELECTRONIC BOX6331-19428-3CMM21-32-33I,R,M C1NORD-MICRO "由于未配备相关化工品及
工作环境，
不执行CMM21-32-33修理
部份“环氧底漆及失效黑色
漆面修理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-32-
33 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and defective black Lacquer
Coating repair”."
211#
55外流活门OUTFLOW VALVE 20792-
01AA/01AC/02AC/03AC CMM21-32-34R C1NORD-MICRO
执行CMM21-32-34
修理部分“更换球型轴承以
及铆钉,销钉工作”
Because no relate tools，
do not perform CMM 21-
32-34 REPAIR section
replacement of “spherical
bearings， riveted nuts
and pin”.
由于未配备相关工具，不
执行CMM21-32-34
修理部分“更换失效螺套工
作”
Because no relate tools，
do not perform CMM 21-
32-34 REPAIR section “
replacement of defective
inserts”.
由于未配备相关化工品及
工作环境，不执行
CMM21-32-34修理部分“环
氧底漆及失效白色漆面修
理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-32-
34 REPAIR section “
CHEMICAL
CONVERSION AND
211#
56外流活门OUT FLOW VALVE20792-04AC CMM21-32-34I,R C1NORD-MICRO 执行CMM21-32-34
修理部分“更换球型轴承以
及铆钉,销钉工作”
Because no relate tools，
do not perform CMM 21-
32-34 REPAIR section replacement of “spherical bearings， riveted nuts
and pin”.
由于未配备相关工具，不
执行CMM21-32-34
修理部分“更换失效螺套工
作”
Because no relate tools，
do not perform CMM 21-
32-34 REPAIR section “replacement of defective inserts”.
由于未配备相关化工品及
工作环境，不执行
CMM21-32-34修理部分“环
氧底漆及失效白色漆面修
理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-32-
34 REPAIR section “
CHEMICAL
CONVERSION AND
211#
57压力控制器PRESSURE
CONTROLLER
7121-19971-
01AA/01AB/01AC/01BA
CMM21-33-20I,R,M C1NORD-MICRO
"由于未配备相关化工品及
工作环境，不执行
CMM21-33-20修理部份“环
氧底漆及失效黑色漆面修
理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-33-
20 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and
defective black Lacquer
Coating repair”.
由于未配备相关工具，不
执行CMM21-33-20
修理部分“更换失效螺套”
Because no relate tools，
do not perform CMM 21-
33-20 REPAIR section “
replacement of defective
inserts ”
由于未配备相关工具及软
件，不执行CMM21-33-20
修理部分“软件装填程序”。

Because no relate tools
and software，do not
perform CMM 21-33-20
REPAIR section “S/W
Load Procedure“."
211#
58压力控制器PRESSURE
CONTROLLER
21933-01AA,-01AB,-01AC CMM21-33-21I,R,M C1Nord-Micro
"由于未配备相关工具，不
执行CMM21-33-21
修理部分“更换失效螺套和
铆钉工作”
Because no relate tools，
do not perform CMM 21-
33-21 REPAIR section “
replacement of defective
inserts and riveted parts ”"
211#
59压力控制器PRESSURE
CONTROLLER
21933-01AD CMM21-33-21I,R C1NORD-MICRO
"由于未配备相关工具，不
执行CMM21-33-21
修理部分“更换失效螺套和
铆钉工作”
Because no relate tools，
do not perform CMM 21-
33-21 REPAIR section “
replacement of defective
inserts and riveted parts ”"
211#
60外流活门OUTFLOW VALVE4063-19972-01AA/-01AB CMM21-33-30I,R,M C1NORD-MICRO "由于未配备相关化工品及
工作环境，
不执行CMM21-33-30修理
部份“底漆和环氧涂层修理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-33-
30 REPAIR section “
Repair of Primer Coating
and Surface Coating”."
211#
61电子盒ELECTRONIC BOX 6331-20202-
01AA/01AB/02AA/02AB
CMM21-33-32I,R,M C1MORD-MICRO
"由于未配备相关工具及软
件，不执行CMM21-33-32
修理部分“飞行软件装填工
作”。

Because no relate tools
and software，do not
perform CMM 21-33-32
REPAIR section “
Download of Flight
Software"".
由于未配备相关化工品及
工作环境，
不执行CMM21-33-32修理
部份“环氧底漆及失效黑色
漆面修理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-33-
32 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and
defective black Lacquer
Coating repair”.
"
211#
62外流活门OUTFLOW VALVE21230-01AB/-02AC/-03AC CMM21-33-33I,R,M C1Nord-Micro "由于未配备相关工具，不
执行CMM21-33-33
修理部分“更换失效螺套工
作”
Because no relate tools，
do not perform CMM 21-
33-33 REPAIR section “replacement of defective inserts”.
由于未配备相关化工品及
工作环境，不执行
CMM21-33-33修理部份“环
氧底漆及失效灰色漆面修
理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-33-
33 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and defective grey Lacquer
Coating repair”.
"
211#
63电子盒ELECTRONIC BOX20995-01AB/-02AC/-03AC CMM21-33-35I,R,M C1Nord-Micro "由于未配备相关化工品及
工作环境，
不执行CMM21-33-35修理
部份“环氧底漆及失效黑色
漆面修理”。

Because no relate
Chemical materials and
work environment ，do
not perform CMM 21-33-
35 REPAIR section “
Chemical Conversion and
Epoxy Primer Coating and defective black Lacquer
Coating repair”."
211#
64流量控制和关断
活门
FLOW CONTROL AND
SHUTOFF
810204-2,810204-3,810204-
4
CMM21-35-01I,R,M C1
HAMILTON
SUNDSTRAND
有限制。

Limited. 1.
因设备/器材原因，不执行
CMM21-35-01的修理程
序，活门壳体修理2-3.
Due to the equipment
/material problem, do not
perform the repair
procedure, valve housing
repair 2-3 of CMM 21-35-
01.
213#
65配平空气压力调
节和关断活门
TRIM AIR PRESSURE
REGULATING AND
SHUTFFVALVE
810229-2,-3,-4,-5,-6CMM21-35-02I,R,M,O C1
HAMILTON
SUNDSTRAND
No Limitation 没有限制213#
66电气风扇ELECTRIC FAN 7110605H01S01,7110605H0
2S01
CMM21-43-03I,R C1
Hamilton
Sundstrand
No Limitation 没有限制211#
67热交换器HEAT EXCHANGER182820-2/-3,182820-1-1CMM21-50-14I,R,M C1HONEYWELL 有限制。

Limited. 1.
因设备原因，不执行
CMM21-50-14的修理程
序，段落2.I. Due to the
equipment problem, do
not perform the repair
procedure, paragraph 2.I
of CMM 21-50-14.
213#
68热交换器HEAT EXCHANGER182820-4CMM21-50-14I,R,M C1HONEYWELL 有限制。

Limited. 1.
因设备原因，不执行
CMM21-50-14的修理程
序，段落2.I. Due to the
equipment problem, do
not perform the repair
procedure, paragraph 2.I
of CMM 21-50-14.
213#
69空气循环机AIR CYCLE MACHINE2206400-1,2206400-2CMM21-50-78I,R,M,O C1HONEYWELL No Limitation 没有限制213#
70温度控制活门TEMPERATURE
CONTROL VALVE
398908-2/3CMM21-50-83I,R,M,O C1HONEYWEILL No Limitation 没有限制213#
71温度控制活门TEMPERATURE
CONTROL VALVE
398908-4CMM21-50-83I,R,M,O C1HONEYWELL No Limitation 没有限制213#
72温度控制活门TEMPERATURE
CONTROL VALVE
398908-5CMM21-50-83I,R,O C1HONEYWELL No Limitation 没有限制213#
73热交换器HEAT EXCHANGER719235-4~9CMM21-51-02I,R,M C1HAMILTON
STANDARD
修理15硅铝漆保护层
Application of Silicone-
Aluminum Protective
Coating (Toluene or
Water-Based)无喷漆设备
213#
74气动活门PNEU VALVE717998-4CMM21-51-05I,R,M,O C1HAMILTON
STANDARD
No Limitation 没有限制213#
75空调模块组件,
M21314
AIR CONDITIONING
MODULE
ASSEMBLY,M21314
233W3204-3,233W3204-
4,233W3204-5，233W3204-
6,233W3204-7,233W3204-
8,233W3204-9,233W3204-
10,233W3204-15
CMM21-51-07I,R,M C1BAE SYSTEM No Limitation 没有限制211#
76压差传感器DIFFERENTIAL
PRESSURE SENSOR
9106A0003-01,9106A0003-
02
CMM21-51-16I,R C1LIEBHERR No Limitation 没有限制211#
77空气轴承空气循
环机
AIR BEARING AIR
CYCLE MACHINE
774469-4CMM21-51-61I,R,M C1HAMILTON No Limitation 没有限制213#
78冷凝器热交换器Condenser Heat Exchang2340404-1CMM21-51-84I,R C1Honeywell
因不具备环氧脂漆
X75314，不执行修理2.G.
环氧脂漆的施加。

Due to lack of Epoxy
Ester X75314, not
perform REPAIR 2.G. Application of Epoxy Ester
Layer.
213#
79温度传感器TEMPERATURE
SENSOR
764A0000-02,764A0000-
03,764B0000-01,764B0000-
02
CMM21-52-22I C1LIEBHERR No Limitation 没有限制211#
80主热交换器Main Heat Exchanger 967A0000-01,967A0000-
02,967A0000-03
CMM21-52-26I,R C1Honeywell
有限制。

Limited. 1.
因设备原因，不执行
CMM21-52-26的修理程
序，段落1.G. Due to the
equipment problem, do
not perform the repair
procedure, paragraph 1.G
of CMM 21-52-26.
213#
81初级热交换器PRIMARY HEAT
EXCHANGER
966A0000-01,966A0000-
02,966A0000-03
CMM21-52-30I,R C1Honeywell
有限制。

Limited. 1.
因设备原因，不执行
CMM21-52-30的修理程
序，段落6.F. Due to the
equipment problem, do
not perform the repair
procedure, paragraph 6.F
of CMM 21-52-30.
213#
82臭氧转换器Ozone Converter67200064-1CMM21-52-70I,R C1Honeywell 无限制
No limitation
213#
83冲压热交换器Ram Heat Exchanger67200152-00,67200152-01CMM21-52-80I,R C1Honeywell 无限制
No limitation
213#
84压气机单项活门COMPRESSOR
CHECK VALVE
961A0000-01CMM21-53-36I,R,M,O C1LIEBHERR No Limitation 没有限制213#
85大厨房风扇模块LARGE GALLEY FAN
MODULE
7111005H01CMM
21-53-89,21-
53-46
I,R C1
Hamilton
Sundstrand
No Limitation 没有限制211#
86九英寸直径电气
关断活门
NINE INCH DIAMETER
ELECTRIC SHUTOFF
VAVLE
398774-2~9CMM21-58-01I,R,M,O C1HONEYWELL No Limitation 没有限制213#
87空气冷却风扇AIR COOLING FAN732591G CMM21-58-02I,R,M C1
HAMILTON
SUNDSTRAND
No Limitation 没有限制211#
88空气冷却风扇AIR COOLING FAN M732591AF,M732591BF,M7
32591CF,M732591DF,M732
591EF
CMM21-58-02I,R,M C1
HAMILTON
SUNDSTRAND
No Limitation 没有限制211#
89冷却风扇COOLING FAN732591/732591A~F CMM21-58-02I,R,M,O C1
HAMILTON
SUNDSTRAND
No Limitation 没有限制211#
90马达作动蝶形关
断活门
Motor Actuated Butterfly
Shutoff Valve
420365-1CMM21-58-03I,R,M,O C1
WHITTAKER
CONTROLS
No Limitation 没有限制213#
91旋转作动器ELECTROMECHANICA
L ROTARY ACTUATOR
541962-1-1;541962-
4;541962-5;541962-6
CMM21-60-36I,R,M,O C1Honeywell
"Due to lack of Helicoil
insert repair tool，
REPAIR section，
REPAIR LOOSE OR
DAMAGED INSERTS
cannot be performed
由于缺少Helicoil螺套修理
工具，修理章节，修理松
动或损坏的螺套的工作无
法执行"
211#
92轴流风扇VANEAXIAL FAN024116CMM21-61-02I,R,M C1AMETEK No Limitation 没有限制211#
93分区配平活门VLV,ZONE TRIM719224-3/4CMM21-61-05I,R,M,O C1HAMILTON
STANDARD
No Limitation 没有限制213#
94区域活门作动器ACTR,ZONE VALVE720434-3/6CMM21-61-06I,R,M C1HAMILTON
STANDARD
"Due to lack of Helicoil
insert repair tool，
REPAIR section，
REPLACE ALL
DAMAGED INSERTS
cannot be performed
由于缺少Helicoil螺套修理
工具，修理章节，更换所
有损坏的螺套无法执行"
211#
95活门壳体和螺套HOUSING AND
INSERTS-VALVE
738353-2OHM21-61-08R C1
HAMILTON
SUNDSTRAND
No Limitation 没有限制213#
96配平空气压力调
节关断活门
Trim Air Pressure
Regulating and Shutoff
Valve
3214230/-2~4,3214862-
1,3214962/-1,3214972/-1
CMM21-61-11I,R,M,O C1Honeywell No Limitation 没有限制213#
97组件控制器PACK CONTROLLER759D0000-01/02CMM21-61-11I,R,M C1LIEBHERR No Limitation 没有限制211#
982英寸直径配平
空气供给调节活
门
Two-Inch Diameter Trim
Air Supply Modulating
Valve
398786-2~5CMM21-61-17I,R,M,O C1Honeywell No Limitation 没有限制213#
993.5英寸直径电动
双向调节和关断
蝶型活门
THREE AND ONE-
HALF INCH DIAMETER
ELECTRIC DUAL
MODULATING AND
SHUTOFF BUTTERFLY
398116-1-1CMM21-61-49I,R,M,O C1Honeywell No Limitation 没有限制213#
100涡轮旁通活门VLV,TURB B/P719223-3/4CMM21-62-01I,R,M,O C1HAMILTON
STANDARD
No Limitation 没有限制213#
101旁通活门作动器ACTR,BYPASS VLV742824-4OHM21-62-02I,R,M,O C1HAMILTON
STANDARD
"Due to lack of screw
extractor tool Kelox No.4
and stud installing tool,
REPAIR section,
REPLACE DAMAGED
MOUNTING STUDS
cannot be performed
由于缺少螺钉取出工具
Kelox No.4和螺栓安装工
具Kelox ST 3-32-5，修理
章节，更换损坏的安装螺
栓工作无法执行"
211#
102水分离器SEPARATOR,WATER183010-3,183010-4CMM21-70-06I,R,M,O C1HONEYWELL No Limitation 没有限制213#
103臭氧转换器Ozone Converter2341590-1, S213W291-4CMM21-70-30I,R C1Honeywell 无限制
No limitation
213#
104臭氧转换器Ozone Converter7010106H02CMM21-73-06I,R C1Hamilton 无限制
No limitation
213#
C2 Rating
Auto Flight
自动飞行
ITEM CHINESE NOMENCLATURE PN DOC ATA LEVEL RATING MANUFACTURE LIMITATION WORKSHOP 项次中文名称英文名称件号依据文件章节号修理级别类别厂家限制车间
1方式控制板MODE CONTROL
PANEL
4051601-937/-939CMM22-11-84I,R,M C2HONEYWELL
"1. Without the
Insertion/Extraction and
Crimp tools, cannot
perform the Connector
repair in REPAIR section.
2. Without the No. 1 Zahn
cup, cannot perform the
""Touch up painted
surfaces of chassis and
access cover"" in REPAIR
section.
1. 不具备安装/提取及压接
工具，不能执行修理章节
中插头修理操作。

2. 不具备1号蔡恩杯，不能
执行修理章节中""客体及盖
板漆面修复""操作。

"
211#
2飞行控制计算机FLIGHT CONTROL
COMPUTER
4082499-902,-903CMM22-12-23I,R,M C2Honeywell
"Without the tools, cannot
perform ""Removal and
Rewrapping of Wire-Wrap
Connections"" in repair
section.
不具备工具，不能执行修
理章节""拆卸并重绕绕线插
头""工作。

"
211#
Ameco Components Repair Capability List Rev./Date: 38/May.06, 2022 附件修理能力清单
(EASA)
3方式控制板MODE CONTROL
PANEL
4082260-937,4082260-939
CMM22-19-20I,R,M C2HONEYWELL
"1. Without the No. 1
Zahn cup, cannot perform
the ""Touch-up of Painted
Surfaces of the Chassis
and Cover (Subtask 22-
19-20-300-004-A01)"" and
""epoxy enamel for the
knob face"" of the
Subtask 22-19-20-300-
008-A01 in Repair
section.
2. Without the Installation
Tool IT1002AP-
3/IT1074HT-3, cannot
perform the
""Replacement of
Defective Screw for MOD
E (Subtask 22-19-20-300-
009-A01)"" in Repair
section.
1. 不具备1号蔡恩杯，不能
执行修理章节""壳体及盖板
漆面修复 (Subtask 22-19-
20-300-004-A01)""和
Subtask 22-19-20-300-
008-A01中""旋钮环氧瓷器
""修理。

2. 不具备专用安装工具
IT1002AP-3/IT1074HT-
3，不能执行修理章节""E
型螺钉更换(Subtask22-
211#
4自动油门开关组
件
AUTOTHROTTLE
SWITCHPACK
ASSEMBLY
254A1150-15 254A1150-16CMM22-32-34I,R C2Boeing没有限制 No Limitation211#
5飞行增稳计算机FLIGHT
AUGMENTATION
COMPUTER
B397BAM0513,B397BAM05
15,B397BAM0617,B397BAM
0618,B397BAM0619,B397B
AM0620
CMM22-66-32I,R,M C2THALES
"Cannot perform
""Interconnection Assy""
of assembly section in
CMM22-66-32A because
of no positioning tool.
因没有定位工具，不能执
行CMM22-66-32A组装章
节的“互联组件”."
211#。