翻2译

中 文 英 文
旋切厚度Rotary cut thickness
木芯直径Wood the core diameter
圆木直径Log diameter
系统急停Emergency stop System
设置Set up
信息Information
状态Status
停止Stop
快进Fast Forward
快退Fast Backward
自动进Automatic feed
自动退Automatically Retreat
补厚Fill thick
用户参数设置User parameter settings
切厚调整Cut thick adjustment
停止位置Stop position
刀尾补偿设置Last compensation setting knife
补偿厚度Compensated thickness
补偿位置Compensated position
打木芯延时Play wood core delay
打木芯动作Wood core hit action
到数补偿张数The number of compensation to the number of sheets 提前停机系数Early stopping coefficient
主轴重启位置Spindle restart position
尾刀修正Tail cutter correction
尾刀修正系数Tail cutter correction coefficient
秒Seconds
设置Set up
下页Next page
退出Exit
秒Seconds
机械参数设置Mechanical parameter setting
丝杆牙距Lead screw Pitch
进给传动比Feeding transmission ratio
双棍轴间距Double stick shaft distance
双棍直径Double rod diameter
双棍转速Double stick speed
最大行程Maximum stroke
最小行程Minimum travel
曲线补偿系数Compensation coefficient curve
剪板电机速比Shears plate motors speed ratio
测距编码Ranging coding
测速编码Speed coding
传感器长度Sensor length
倍Times
转/分Turn/Minute
线Line
毫米Millimeter
监测Monitor
秒Seconds
最大转速Maximum speed
快进转速Fast forward speed
快退转速Rewind speed
后退转速Back speed
提前减速距离Early deceleration distance 提前停机距离Early stopping distance
工作模式Working mode
返回Return
性能参数设置Performance parameter setting 权限设置Permission set
内核设置Kernel Setting
维护设置Maintenance settings
管理密码Password management
开机密码Power-on password
维护密码Maintain a password
内核密码Kernel Password
用户密码User password
系统权限设置System permissions settings 用户参数User parameter
机械参数Mechanical parameters
性能参数Performance parameters
权限密码User password
刀口距离Incision distance
剪板宽度Shears plate width
尾二调整Last two adjustments
尾板调整tail board adjustment
帮助Help
提示Prompt
机器待机中Standby machine
急停开启Emergency stop opening
厚度修正Thickness correction
剪板开关Shears plate switch
尾板学习Tail board learning
打木芯延时Hit the wooden core delay
打木芯动作Wood-playing action
木芯修正Wood core correction
上页On page
刀口距离较准Incision distance calibrated 尾板学习操作Learn tail board operating。