200吨液压机的技术参数

200吨液压机的技术参数
英文回答：
The technical specifications of a 200-ton hydraulic press are as follows:
1. Maximum Pressure: The press can exert a maximum pressure of 200 tons or 1,764,000 Newtons.
2. Stroke Length: The stroke length refers to the distance the ram or plunger can travel. For a 200-ton hydraulic press, the stroke length can vary, but it is typically in the range of 300-500 millimeters.
3. Daylight Opening: The daylight opening is the maximum distance between the press table and the ram when the press is fully open. In the case of a 200-ton hydraulic press, the daylight opening can range from 800-1200 millimeters.
4. Speed: The press speed refers to the rate at which the ram moves during different phases of operation. The speed can be adjusted based on the specific requirements of the application. Typical speed ranges for a 200-ton
hydraulic press are 100-300 millimeters per second.
5. Bed Size: The bed size determines the maximum dimensions of the workpiece that can be accommodated on the press. For a 200-ton hydraulic press, the bed size can vary, but it is typically in the range of 1000-1500 millimeters
in width and 1000-2000 millimeters in length.
6. Motor Power: The motor power indicates the amount of power required to operate the hydraulic press. For a 200-
ton press, the motor power can range from 30-75 kilowatts, depending on the specific design and features of the press.
7. Control System: The hydraulic press is equipped with
a control system that allows for precise operation and monitoring of various parameters. The control system may include features such as pressure control, stroke control, and safety interlocks.
中文回答：
200吨液压机的技术参数如下：
1. 最大压力，液压机最大压力为200吨，相当于176.4万牛顿。

2. 行程长度，行程长度指的是活塞或柱塞能够移动的距离。

对
于200吨液压机，行程长度可以有所不同，但通常在300-500毫米
范围内。

3. 光照间隙，光照间隙是指液压机完全打开时，工作台和活塞
之间的最大距离。

对于200吨液压机，光照间隙通常在800-1200毫
米范围内。

4. 速度，速度指的是活塞在不同操作阶段移动的速度。

速度可
以根据具体应用的要求进行调整。

200吨液压机的典型速度范围为100-300毫米/秒。

5. 工作台尺寸，工作台尺寸决定了液压机可以容纳的工件的最
大尺寸。

对于200吨液压机，工作台尺寸可以有所不同，但通常在
宽度1000-1500毫米和长度1000-2000毫米范围内。

6. 电机功率，电机功率表示操作液压机所需的功率。

对于200吨液压机，电机功率可以在30-75千瓦范围内，具体取决于液压机的设计和功能。

7. 控制系统，液压机配备了控制系统，可实现对各种参数的精确操作和监控。

控制系统可能包括压力控制、行程控制和安全互锁等功能。