常用3M胶物料特性

合集下载

3M VHB 胶带物性表

Tape NumberColorThickness in. (mm)Tape NumberColorThickness in. (mm)4930 (F) White 0.025 (0.64) 4955 White 0.080 (2.0) 4932 White 0.025 (0.64) 4956 (F) Gray 0.062 (1.55) 4936 (F) Gray 0.025 (0.64) 4957F Gray 0.062 (1.55) 4941 (F) Gray 0.045 (1.1) 4959 (F) White 0.120 (3.0) 4943F Gray 0.045 (1.1) 4979F Black 0.062 (1.55) 4945 White 0.045 (1.1) 4991 Gray 0.090 (2.3) 4946 White 0.045 (1.1) 5915 (P) Black 0.016 (0.4) 4947F Black 0.045 (1.1) 5925 (P) Black 0.025 (0.64) 4949 Black 0.045 (1.1) 5930 (P) Black 0.032 (0.8) 4950 White 0.045 (1.1) 5952 (P) Black 0.045 (1.1) 4951 White 0.045 (1.1) 5958FR Black 0.040 (1.0) 4952 White 0.045 (1.1)5962 (P) Black 0.062 (1.55)VHB ™T apesTechnical DataMay, 2013Product Description:3M ™ VHB ™ Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners.These 3M ™ VHB ™ Tapes are made with acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance.These tapes utilize a variety of specific foam, adhesive, color and release liner types to provide each product/family with specific features. These features can include adhesion to specific or a broad range of materials, conformability, high tensile strength, high shear and peel adhesion, resistance to plasticizer migration, and UL746C recognition. All 3M ™ VHB ™ Tapes have excellent durability and excellent solvent and moisture resistance.Note: All 3M ™ VHB ™ Tapes should be thoroughly evaluated by the end user under actual use conditions with intended substrates to determine whether a specific tape is fit for a particular purpose and suitable for user ’s method of application, especially if expected use involves extreme environmental conditions or high dead load stress.3M ™ VHB ™ T ape ProductsTape NumberColorThickness in. (mm)4611 Dk Gray 0.045 (1.1) 4618 White 0.025 (0.64) 4622 White 0.045 (1.1) 4624 White 0.062 (1.55) 4646 Dk Gray 0.025 (0.64) 4655 Dk Gray 0.062 (1.55) 4905 Clear 0.020 (0.5) 4910 Clear 0.040 (1.0) 4914 White 0.010 (0.25) 4919F Black 0.025 (0.64) 4920 White 0.015 (0.4) 4926 Gray 0.015 (0.4) 4929 Black 0.025 (0.64) (F) or (P) after the product number designate that both a paper and film liner product version are available. [e.g. 4930 (paper liner) and 4930F (film liner),5915 (film liner) and 5915P (paper liner). See page 3 for specific details.3M ™ VHB ™ Tapes Adhesive Types:Multi-Purpose Acrylic: This adhesive bonds to a wide range of materials including metals, glass, and high and medium surface energy plastics and paints. This unique adhesive also has the ability to resist migration of plasticizers in vinyl substrates. Modified Acrylic: This adhesive bonds to medium low surface energy paints and plastics, including many powder coated paints in addition to the substrates listed with the multi-purpose acrylic adhesive (except plasticized vinyl).General Purpose Acrylic: This adhesive bonds to most higher surface energy substrates including metal, glass and high surface energy plastics.Low Temperature Appliable Acrylic: This adhesive can make bonds down to 32°F (0°C), compared to 50°F (10°C) for most acrylic adhesives. This adhesive system bonds to most high surface energy substrates including metal, glass and high surface energy plastics.Low Surface Energy: This high performance synthetic adhesive bonds to many lower surface energy substrates, including many plastics and power coated paints, plus smooth general purpose substrates.3M ™ VHB ™ Tapes Foam Types:Conformable: This foam provides high strength with the capability of conforming to the irregularities of rigid substrates, even when there might be slight mismatch.Very Conformable: This foam provides the highest level of conformability while maintaining high internal strength. Firm: This foam provides the highest level of foam strength in the 3M ™ VHB ™ Tapes family. Clear: Not technically a foam, this solid acrylic material provides excellent clarity.3M™VHB™Tapes3M™ VHB™ Tape Families:4941 This family utilizes multi-purpose acrylic adhesive on both sides of conformable foam. The adhesive provides excellent adhesion to a broad range of high and medium surface energy substrates including metals, glass, and awide variety of plastics, as well as plasticized vinyl. The conformable foam provides good contact, even withmismatched substrates. Available in gray and black.5952 This family matches the modified acrylic adhesive on both sides of very conformable foam, providing adhesion to the broadest range of substrates, including most powder coated paints. Available in black.4950 This family has general purpose adhesive on both sides of firm type foam. This family is typically used on metal, glass and high surface energy plastic substrates. Available in white and black.4945 This family has multi-purpose adhesive on both sides of firm foam. Available in white.4910 This family of clear tapes is excellent for applications where clear or colorless is desired. The general purpose adhesive on both sides is suitable for high surface energy substrates.4951 This family of tapes is based around the low temperature appliable acrylic adhesive system, utilized on both firm and conformable foam types. These products are suitable for high surface energy substrates. Available inwhite (firm foam) and gray (conformable foam).4952 This family utilizes the low surface energy adhesive on a firm foam. Available in white.4611 This family has a general purpose adhesive on both sides of firm foam. This family of tapes is typically used on metal substrates, and has the added feature of high temperature resistance, making it often suitable for bondingprior to high temperature paint processing. Available in dark gray.4622 This family has general purpose adhesive on the face side (the side that typically would be bonded first) and multi-purpose adhesive on the liner side (the side exposed when the release liner is removed) of a conformablefoam. Available in white.3M™ VHB™ Tape Product Family GuideNOTE: For easy product comparison, data in this product information page will be organized by product family.3M ™ VHB ™ TapesTypical Physical PropertiesNote: The following technical information and data should be consideredrepresentative or typical only and should not be used for specification purposes.3M ™ VHB ™ TapesTypical Performance CharacteristicsNote: The following technical information and data should be consideredrepresentative or typical only and should not be used for specification purposes.90° Peel Adhesion - Based on ASTM D3330 -T o stainless steel, room temperature, jaw speed 12 in/min (305 mm/min). Average force to remove is measured. 72 hour dwell.Normal Tensile (T-Block T ensile) - ASTM D-897 - T o aluminum, room temperature, 1 in 2 (6.45 cm 2), jaw speed 2 in/min (50 mm/min.) Peak force to separate is measured. 72 hour dwell.Dynamic Overlap Shear - ASTM D-1002 - T o stainless steel, room temperature, 1 in 2 (6.45 cm 2), jaw speed 0.5 in/min (12.7 mm/min.) Peak force to separate is measured. 72 hour dwell.3M ™ VHB ™ TapesTypical Performance CharacteristicsNote: The following technical information and data should be consideredrepresentative or typical only and should not be used for specification purposes.Static Shear - ASTM D3654 - To stainless steel, tested at various temperatures and gram loadings. 0.5 in 2 (3.22 cm 2). Will hold listed weight for 10,000 minutes (approximately 7 days). Conversion: 1500 g/0.5 in 2 equals 6.6 lb/in 2; 500 g/0.5 in 2 = 2.2 lb/in 2.Short Term Temperature Tolerance - No change in room temperature dynamic shear properties following 4 hours conditioning at indicated temperature with 100 g/static load. (Represents minutes, hours in a process type temperature exposure).Long Term Temperature Tolerance - Maximum temperature where tape supports at least 250 g load per 0.5 in 2 in static shear for 10,000 minutes. (Represents continuous exposure for days or weeks).3M™VHB™Tapes*Exception – 5915 (P) max. width 46 inches (1170 mm); 5925 (P) max. width 47 inches (1195 mm).Slitting T oleranceStandard slitting tolerance ± 1/32 inch (± 0.031 inch, ± 0.8 mm).Precision slitting with slitting tolerance of ± 1/64 inch (± 0.016 in., ± 0.44 mm) is available on select products with minimum order of full web increments.Core SizeAll products are provided on a 3 inch ID Core (76.2 mm).Converted PartsIn addition to standard and custom roll sizes available from 3M through the distribution network, 3M™VHB™ Tapes are also available in limitless shapes and sizes through the 3M Converter network. For additional information, contact 3M Converter Markets at 1-800-223-7427 or on the web at /converter.Shelf LifeAll 3M™VHB™ Tapes have a shelf life of 24 months from date of manufacture when stored at 40°F to 100°F (4°C to 38°C) and 0-95% relative humidity. The optimum storage conditions are 72°F (22°C) and 50% relative humidity.Performance of tapes is not projected to change even after shelf life expires; however, 3M does suggest that3M™VHB™ Tapes are used prior to the shelf life date whenever possible.The manufacturing date is available on all 3M™VHB™ Tape cores as the lot number. The lot number, typically a 4 digit code, is a Julian date (Y D D D). The first digit refers to the year of manufacture, the last 3 digits refer to the days after January 1. Example: A lot number of 9266 would translate to a date of manufacture of Sept. 22 (266th day of year) in 2009. On most products this is found as the 4 digits after the “9” following the product number. For tapes printed continuously around the core (e.g. 3M™VHB™ Tape 5952 family) the lot number typically will be the string of 4 digits preceding the product number.3M ™ VHB ™ TapesTapesConstant Factor 4941 at 1 kHz2.29 0.0245 Tapes 4941 hr ft °F 0.53 (w/mK) (0.08) 5952 0.37 (0.05) at 1 MHz 1.95 0.0506 4950/4945 0.63 (0.09) 4950 at 1 kHz 2.28 0.0227 4910 1.09 (0.16) at 1 MHz 1.99 0.0370 46110.77(0.11)5952 at 1 kHz2.14 0.00654910 at 1 kHz 3.21 0.0214 at 1 MHz 2.68 0.0595 4611 at 1 kHz 2.80 0.0130 at 1 MHz2.430.0564nAdditional Typical Performance CharacteristicsNote: The following technical information and data should be considered representative or typical only and should notbe used for specification purposes.Outgassing: 3M ™ VHB™ Tapes % TML %VCM %WVR Dielectric Breakdown Strength (ASTM D149)3M ™ VHB™ Tapes (in volts/mil)3M ™ VHB ™ TapesUL746C Listings - File MH 17478Category QOQW2 Component - Polymeric Adhesive Systems, Electrical Equipment4930 0.77 0.01 0.214932 2.41 0.66 0.23 49451.240.010.19TML - Total Mass LossVCM - Volatile Condensible Materials WVR - Water Vapor RegainedNASA Reference Publication, “Outgassing Data for Selecting Spacecraft Materials”, (11/18/2004) Available online at 4941 360 4926 330 5952 455 5925 520 4950 460 4920 640 4910 630 4611330Dielectric Constant (ASTM D150) 3M ™ VHB ™ Dielectric DissipationThermal Conductivity - K-value 3M™ VHB™ BTU in/at 1 MHz1.990.0374Resistivity (ASTM D257)R-Value = thicknessK-value(When units of K-value are BTU-in/hr ft °F and thickness is given in inches.)3M ™ VHB ™ Volume Resistivity Surface Resistance Tapes (in ohm-cm)(in ohms/square)4914 1.7 x 10>104941 2.1 x 10 2.7 x 105952 2.5 x 10>10 4950 1.5 x 10>10 4920 1.7 x 10>10 4910 3.1 x 10>10 46111.4 x 10>10Water Vapor Transmission Rate (WVTR) (ASTM F1249) at 38°C/100% RH 3M ™ VHB ™ Tapes 4950 14.0 g/(m 2 day) 4941 25.6 g/(m 2 day) 595237.1 g/(m 2 day)Solvent and Fuel ResistanceTypical 3M ™ VHB ™ Tape Properties for Modeling %R100 90 Thermal Coefficient Ae 8080 of Expansion1 x 10in/in/°F1.8 x 10mm/mm/°C Shear Modulus (@25°C, 1 Hz)d t 7070 he 6060 en 5050 s t 4040 i i 3030 4950 Family: 6 x 10Pa 4941 Family: 3 x 10Pa(Shear Modulus is both temperature and frequency dependent).Youngs Modulus: For VHB tapes the YoungsModulus will be about 3 times the Shear Modulus. v o 20e Salt WaterHydraulic Fluid10W30 Motor Oil KeroseneIsopropyl AlcoholJet Fuel20 10 0Poisson ’s Ratio T est MethodGlycol Antifreeze0.49Burn Characteristics 3M ™ VHB ™ Tape 5958FR Meets FAR 25.853 (a) 12 second vertical burn, Appendix F, Part I (a)(ii).Meets NBS Smoking Density (ASTM F814/E662). Meets Toxicity (Draeger Tube ABD0031, AITM 3.0005)• T ape between stainless steel and aluminum foil. • 72 hours dwell at room temperature. • Solvent immersion for 72 hours.• T est within 45 minutes after removing from solvent. • 90° peel angle.• 12 in./min. rate of peel.• Peel adhesion compared to control.Note: Continuous submersion in chemical solutions is not recommended. The above information is presented to show thatoccasional chemical contact should not be detrimental to tape performance in most applications in ordinary use.3M ™ VHB ™ TapesE s t i m a t e o f % o f M a x i m u m 3M ™ V H B ™ T a p e A d h e s i o nDesign and T ape Selection ConsiderationsChoose the right tape for the substrate: Adhesives must flow onto the substrate surfaces in order to achieve intimate contact area and allow the molecular force of attraction to develop. The degree of flow of the adhesive on the substrate is largely determined by the surface energy of the substrate.AdhesiveHigh surface energy— SubstrateLow surface energy— SubstrateThis illustration demonstrates the effect of surface energy on adhesive interfacial contact. High surface energy materials draw the adhesive closer for high bond strength.Relationship of Adhesion and Surface Energy for 3M ™ VHB ™ Tape Adhesive FamiliesHIGHMEDIUMLOW400-1100 Aluminum42-50 PolyimideABS38-39PVA36-37EVA18-33 Stainless Steel Copper Zinc Tin LeadAnodized Aluminum GlassPhenolic NylonAlkyd Enamel Polyester Epoxy Paint PolyurethanePolycarbonate (Lexan ®) PVC Noryl ® AcrylicPolane ® Paint Powder PaintPolystyrene AcetalKynar ® Paint Powder PaintPolyethylene Polypropylene Tedlar ® Silicone PTFENOTES: There are a wide variety of formulations, surfaces finishes and surface treatments available on substrate materials which can affect adhesion. This chart is intendedto provide only a rough estimate of the adhesion levels which can be expected on some common materials relative to a reference surface such as aluminum.Light abrasion of surface will significantly increase adhesion levels on many materials, except when using tapes 4952/4932.Use the right tape thickness: The necessary thickness of tape depends on the rigidity of substrates and their flatness irregularity. While the 3M ™ VHB ™ Tapes will conform to a certain amount of irregularity, they will not flow to fill gaps between the materials. For bonding rigid materials with normal flatness, consider use of tapes with thickness of 45 mils (1.1 mm) or greater. As the substrate flexibility increases thinner tapes can be considered.Use the right amount of tape: Because 3M ™ VHB ™ Tapes are viscoelastic by nature their strength and stiffness is a function of the rate at which they are stressed. They behave stronger with relatively faster rate of stress load (dynamic stresses) and will tend to show creep behavior with stress load acting over a long period of time (static stresses). As a general rule, for static loads, approximately four square inches of tape should be used for each pound of weight to be supported in order to prevent excessive creep. For dynamic loads, the dynamic performance characteristics provided on page 4 should be useful, factoring in the appropriate safety factors.Allow for thermal expansion/contraction: 3M ™ VHB ™ Tapes can perform well in applications where two bonded surfaces may expand and contract differentially. Assuming good adhesion to the substrates, the tapes can typically tolerate differential movement in the shear plane up to 3 times their thickness.Bond Flexibility: While an advantage for many applications where allowing differential movement is a benefit, the tape bonds are typically more flexible than alternative bonding methods. Suitable design modifications or periodic use of rigid fasteners or adhesives may be needed if additional stiffness is required.Severe Cold Temperature: Applications which require performance at severe cold temperatures must be thoroughly evaluated by the user if the intended use will subject the tape product to high impact stresses. A technical bulletin “3M™ VHB ™ Tape Cold Temperature Performance ” (70-0707-3991-0) is available for additional information.3M ™ VHB ™ TapesApplication T echniquesClean: Most substrates are best prepared by cleaning with a 50:50 mixture of isopropyl alcohol (IPA*) and water prior to applying 3M™ VHB™ Tapes.Exceptions to the general procedure that may require additional surface preparation include:• Heavy Oils: A degreaser or solvent-based cleaner may be required to remove heavy oil or grease from a surface and should be followed by cleaning with IPA/water.• Abrasion: Abrading a surface, followed by cleaning with IPA/water, can remove heavy dirt or oxidation and can increase surface area to improve adhesion.• Adhesion Promoters: Priming a surface can significantly improve initial and ultimate adhesion to many materials such as plastics and paints.• Porous surfaces: Most porous and fibered materials such as wood, particleboard, concrete, etc. need to be sealed to provide a unified surface.• Unique Materials: Special surface preparation may be needed for glass and glass-like materials, copper and copper containing metals, and plastics or rubber that contain components that migrate (e.g. plasticizers).Refer to 3M Technical Bulletin “Surface Preparation for 3M™ VHB™ Tape Applications” for additional details and suggestions. (70-0704-8701-5)*Note: These cleaner solutions contain greater than 250 g/l of volatile organic compounds (VOC). Pleaseconsult your local Air Quality Regulations to be sure the cleaner is compliant. When using solvents, be sure to follow the manufacturer ’s precautions and directions for use when handling such materials.Pressure: Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firmapplication pressure develops better adhesive contact and helps improve bond strength. Typically, good surface contact can be attained by applying enough pressure to insure that the tape experiences approximately 15 psi (100 kPa) pressure. Either roller or platen pressure can be used. Note that rigid surfaces may require 2 or 3 times that much pressure to make the tape experience 15 psi.Temperature: Ideal application temperature range is 70°F to 100°F (21°C to 38°C). Pressure sensitiveadhesives use viscous flow to achieve substrate contact area. Minimum suggested application temperatures:• 50°F (10°C): 3M™ VHB™ Tapes 4950, 5952, 4910, 4952, 4611, 4622 families. • 60°F (15°C): 3M™ VHB™ Tapes 4941, 4945 families. • 32°F (0°C): 3M ™ VHB ™ Tape 4951 families.Note: Initial tape application to surfaces at temperatures below these suggested minimums is notrecommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. To obtain good performance with all 3M™ VHB™ Tapes, it is important to ensure that the surfaces are dry and free of condensed moisture.Time: After application, the bond strength will increase asthe adhesive flows onto the surface (also referred to as “we t out”). Bond Typical Build vs. TimeAt room temperature approximately 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours 80and 100% after 72 hours. This flow is faster at higher temperatures and slower at lower temperatures. Ultimate bond strength can be achieved more quickly (and in some cases bond strength can be increased) by exposure of the bond to elevated temperatures (e.g. 150°F [66°C] for 1 hour). This can provide better adhesive wetout onto the substrates. Abrasion of the surfaces or the use of primers/ adhesion promoters can also have the effect of increasing bond strength and achieving ultimate bond strength more quickly.20 MIN 1 HOUR24 HOURS3M ™ VHB ™ TapesSpecial Cases:Rough Surfaces with 3M™ VHB™ Tapes 4932/4952 – 3M™ VHB™ Tapes 4932/4952 were designed to adhere to many low surface energy substrates. Rough surfaces created by light abrasion or textured molds are typically detrimental to bond strength with this tape family.Plasticized Vinyl – Plasticizers compounded in soft vinyl can migrate into adhesives and significantly change their performance characteristics. 3M™ VHB™ Tapes 4941 and 4945 families have very good plasticizer resistance and adhesion to many vinyl formulations. Because of the wide variation in vinyl formulations,however, evaluation by the user must be conducted with the specific vinyl used to ensure that performance will be satisfactory over time. Problems related to plasticizer migration can often be predicted by accelerated aging of assembled parts at 150°F (66°C) for one week).Technical InformationThe technical information, recommendations and other statements contained in this document arebased upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.Product UseMany factors beyond 3M ’s control and uniquely within user ’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user ’s method of application.Limited Warranty3M warrants for 24 months from the date of manufacture that 3M™ VHB™ Tape will be free of defects in material and manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This limited warranty does not cover damage resulting from the use or inability to use 3M ™ VHB™ Tape due to misuse, workmanship in application, or application or storage not in accordance with 3M recommended procedures. AN APPLICATIONWARRANTY EXPRESSLY APPROVED AND ISSUED BY 3M IS AN EXCEPTION. THE CUSTOMER MUST APPLY FOR A SPECIFIC APPLICATION WARRANTY AND MEET ALL WARRANTY ANDPROCESS REQUIREMENTS TO OBTAIN AN APPLICATION WARRANTY . CONTACT 3M FOR MORE INFORMATION ON APPLICATION WARRANTY TERMS AND CONDITIONS.Limitation of Remedies and LiabilityIf the 3M ™ VHB ™ T ape is proved to be defective within the warranty period stated above. THE EXCLUSIVE REMEDY , AT 3M’S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M ™ VHB ™ TAPE. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including negligence, warranty, or strict liability.This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2008 standards.Industrial Adhesives and Tapes Division3M Center, Building 225-3S-06 St. Paul, MN 55144-1000800-362-3550 • 877-369-2923 (Fax) /vhbRecycled Paper 40% pre-consumer 10% post-consumer3M and VHB are trademarks of 3M Company. Tedlar is a registered trademark of E.I. Dupont De Nemours & Co. Inc.Kynar is a registered trademark of Arkema.Lexan and Noryl are registered trademarks of Sabic Innovative Plastics IP BV.Polane is a registered trademark of Swimc, Inc. Printed in U.S.A.©3M 2013 70-0709-3863-7(6/11)。

实用文档之3M各类常用胶带型号及其简介

实用文档之"VHB 胶带"3M™ VHB™ 胶带为全丙烯酸材料，在条件苛刻的应用中能够提供所需的强度和耐候性，而且其优异的粘弹性，可吸收冲击力。

且看不见的胶带帮助保持表面平整度和清洁，改善设计和外观。

产品名描述4604 产品编号:4604厚度:0.400基材:白色泡棉特点与应用:厚双面胶带。

低温环境下，初粘性也不错。

胶带较柔软，比较适合粘接凹凸表面。

4608 产品编号:4608厚度:0.800基材:白色泡棉特点与应用:厚双面胶带。

低温环境下，初粘性也不错。

胶带较柔软，比较适合粘接凹凸表面。

4914 产品编号:4914厚度:0.250基材:白/黑/灰/透明泡棉特点与应用:高粘接强度，高剪切强度，及优异的防水性能。

用于塑料外框粘接，固定电池于电池座，扫描仪外壳与玻璃的粘接。

4920 产品编号:4920厚度:0.375基材:白/黑/灰/透明泡棉特点与应用:高粘接强度，高剪切强度，及优异的防水性能。

用于塑料外框粘接，固定电池于电池座，扫描仪外壳与玻璃的粘接。

4930 产品编号:4930厚度:0.625基材:白色泡棉特点与应用:通用型的厚双面胶带，相对于薄双面胶带更为优异的剥离强度和耐UV性。

4941 产品编号:4941厚度:1.100基材:灰色泡棉特点与应用:高粘接强度，贴附性好，对许多涂料金属的贴附性强。

耐增塑剂。

适合粘接窗框条，管道等。

4945 产品编号:4945厚度:1.100基材:白色泡棉特点与应用:高粘接强度，贴附性好，对许多涂料金属的贴附性强。

耐增塑剂。

适合粘接乙烯装饰物等。

4951 产品编号:4951厚度:1.100基材:白色泡棉特点与应用:高粘接强度,使用温度最低可达０摄氏度。

适用于粘接面板到建筑物,卡车或拖车的铝框架上。

双面胶带3M™ 双面胶带，对塑料和金属材料，甚至粉末喷涂(如：UV喷涂的表面)或一些难粘表面具有优异的粘附性以两面相同胶粘剂之双面胶带产品名描述4801 产品编号:4801厚度:0.100-0.150基材:白色TISSUE透明特点与应用:两面不同的胶层厚度，适合粘UV 涂层的表面。

3M双面胶型号及特点介绍

3M指示胶带及正确打包方法解析3M指示胶带是一种具有指示功能的特殊胶带，可以帮助人们正确识别和使用各种物品。

在日常生活中，我们经常会用到各种类型的胶带，如透明胶带、双面胶带等，而指示胶带则是一种非常实用的辅助工具，可以让我们更加方便快捷地进行区分和识别。

一、3M指示胶带的特点1.高可见性：3M指示胶带通常具有鲜明的颜色和明显的标识，可以帮助人们迅速识别，避免混淆。

2.粘性强：3M指示胶带采用优质的胶黏剂，具有良好的粘附性能，可以牢固粘贴在各种物品表面，不易脱落。

3.耐用性强：3M指示胶带具有良好的耐磨性和耐水性，可以在各种环境条件下稳定使用。

4.安全环保：3M指示胶带通常采用环保材料制成，不含有害物质，安全可靠。

5.多功能性：3M指示胶带可以应用于各个领域，如办公、家庭、教育等，具有广泛的用途。

二、3M指示胶带的分类1.彩色指示胶带：根据不同的颜色标识，用于区分和识别不同的物品或区域。

2.文字指示胶带：在指示胶带上印有文字或图案，用于标识特定的信息或提示。

3.图案指示胶带：具有特殊图案或印花，用于装饰或美化物品，并起到指示作用。

4.可重复使用指示胶带：采用特殊材料制成，可以多次粘贴使用，便于经常更换指示。

三、3M指示胶带的正确打包方法1.准备好物品和包装箱：在进行打包之前，首先要准备好要打包的物品和适合的包装箱。

2.分类整理物品：根据物品的性质和大小，将要打包的物品进行分类整理，方便后续的包装操作。

3.使用3M指示胶带进行标识：根据不同的物品分类，选择合适的3M 指示胶带进行标识，如食品用品、易碎品、重物品等。

4.确保包装箱密封：在装箱的过程中，使用3M指示胶带对包装箱进行密封，确保物品不容易散落或破损。

6.贴心地处理易碎品：对于易碎品或贵重物品，可以额外使用3M指示胶带进行加固处理，保护物品不受损坏。

7.妥当存放物品：在完成打包之后，将包装好的物品妥善存放在干燥通风的地方，避免受潮或受损。

通过以上正确的打包方法，结合3M指示胶带的应用，可以帮助我们更加便捷、高效地进行物品的分类、标识和打包工作，提高工作效率和物品保护性。

3M胶带特性及其应用

3M胶带的型号及适用
55230：初粘性好，持续力强，易吸水。

适用于铭牌、标志、徽章、电子行业9448A：粘度较大。

适用于塑料、橡胶、粗糙表面。

898：耐拉、密度较大。

适用于捆绑、固定、密封、封箱。

8915：耐拉、强度高。

适用于捆绑、固定、密封、封箱。

93015：耐温性好、长期耐温93度。

适用于塑料、轻度油污金属、耐化学溶剂。

55236：初粘性好，持续力强、易吸水。

适用于加工业、塑料行业。

55280：耐服饰、防水。

适用于相框、汽车后视镜、塑料行业。

468M：防水、高性能、耐高温。

适用于一般工业组装、面板冲性及其贴合。

9469PC：高剪力、耐高温UL745C认证。

适用于工业组装。

4737t：耐温163度、易剥离、不留残胶、柔顺性好。

适用于高温精细边界遮蔽、高温烤漆。

9690：高温及低温剪切力好、对光滑表面有好的效果。

适用于手机配件、电脑配件。

467MP：防水、高性能、耐高温。

适用于一般工业组装、面板冲性及其贴合。

4734：蓝色PET膜。

背材薄、直线遮蔽。

9495LE：防水、高性能、耐高温。

适用于低能表面、抗溶性中等。

4941：防潮、耐腐蚀、超高粘性、服帖性高、填缝较好。

由于产品过于繁杂，需要详细了解请咨询微信：wy94581423。

3M双面胶型号及特点介绍

3M双面胶型号及特点介绍1.3MVHB系列3M VHB（全称Very High Bond）系列是3M的一种高性能双面胶，主要特点包括：-强大的粘接能力：3MVHB系列的双面胶能够实现超强的剪切力和粘接力，可用于各种不同材料的粘接，包括金属、塑料、复合材料等。

-耐候性：3MVHB系列的胶水具有出色的耐候性，能够在极端的环境条件下保持粘接性能不变，如高温、低温、UV辐射等。

-高剪切强度：3MVHB系列的双面胶在剪切强度方面非常出色，能够承受大的拉力，提供持久可靠的粘接效果。

2.3M高性能双面胶3M高性能双面胶具有以下特点：-快速粘接：这种双面胶可以实现快速的粘接，无需等待时间，提高工作效率。

-高粘接力：3M高性能双面胶具有出色的粘接力，能够在各种材料上提供强力黏附，确保粘接的牢固性。

-耐温性：这种双面胶能够在高温环境中保持粘接力，不会因温度变化而松脱。

-多种规格：3M高性能双面胶有多种规格可供选择，可以满足不同需求的粘接。

3.3M双面透明胶带3M双面透明胶带是一种通用型的双面胶，主要特点包括：-透明性：这种胶带具有高度透明性，能够实现几乎无痕粘接，不影响外观美观度。

-耐用性：3M双面透明胶带具有优异的耐用性，能够长时间保持粘接性能，不易老化。

-防湿性：这种胶带具有良好的防湿性能，适用于潮湿环境下的粘接需求。

-容易剪断：3M双面透明胶带容易剪断，方便使用。

4.3M双面海绵胶带3M双面海绵胶带是一种具有缓冲和吸震效果的双面胶-缓冲效果：这种胶带具有良好的缓冲效果，能够减轻物体之间的冲击和压力。

-吸震效果：3M双面海绵胶带具有出色的吸震性能，能够减少震动和噪音。

-可调节性：这种胶带可以根据需要进行剪断和粘接，方便灵活。

-耐高温：3M双面海绵胶带具有良好的耐高温性能，适合在高温环境中使用。

总之，3M双面胶具有多种不同的型号和特点，可以满足各种不同应用场景的粘接需求。

无论是在工业生产中还是家庭日常生活中，3M双面胶都是一种方便实用的粘接材料。

常用3M不干胶及其他不干胶的物性和用途

TESA4928
类型丙烯酸基材 PET 厚度 0.125（mm）颜色透明短期耐温性 200（℃）长期耐温性 101（℃）基材：PET薄膜颜色：黑色厚度：0.16mm 棉布基材丙烯酸胶剂，厚度0.1 厚度:0.12MM。基材:不织布(无纺布) 颜色:白色. 基材:棉纸. 胶系:压克力。厚度:0.17MM 性能：粘性佳，耐高温，保侍力佳厚度:0.16MM。基材:不织布(无纺布)
适用范围：LCD与背光模块的固定，
500MM*100M
NITTO 5680W PET 丙烯酸 0.085 耐温性： -30/100 NITTO 5919ML 厚度：0.03或0.05，基材：无基材具有高耐热性，胶和剥离面都可承受高达250摄氏度的高温
黑白双面胶带，遮光、反射粘性极佳，可以用于粘贴软性线路板和强化板、框架等。 500MM*100M
600MM*30M
3M55230 3M8006 3M9075 3M9079 3M9080
1.2*50M 1.2*50M 500MM*100M 1.2*50M
红色字类型
适用范围电子 , 工业, 加工业建筑业
易于操作,适用于家用电器市场,包括冰箱蒸发器黏结及控制面板黏无纺布基材双面胶带,为无纺布基材双面涂布丙烯酸胶粘聚合物涂层白离结,铭牌黏结:广泛适用于加工行业,包括橡塑行业中橡胶条及塑料的剂,厚度0.15MM。形纸黏结压克力胶, 厚度:0.15MM。基材:不织布(无纺布)。耐高聚合物涂层白离温,耐候性佳,粘性强。短期耐温性120(℃) 长期耐温性用途:金属,铭牌,橡胶等粘贴。形纸 80(℃) 厚度为0.05毫米具有超强的耐高温性能(长期149度,短期可达260度),防水等特点、具有超强的稳定性胶体厚度0.05mm,无基材厚度:0.13mm 无基材高初期粘性; 60#DK 58#PCK :一般工业相组装及金属装配适合工业接合及金属加工的高性能胶层用于光滑表面贴合。适用於光滑的LSE塑胶材质 UL UL

3M胶

3M双面胶分类1、按特性分为双面胶、单面胶；2、按基材分：无纺布基材双面胶（由无纺布基材双面涂布丙烯酸胶组成）：如3M9448、3M9080、3M9075等；无基材基材双面胶（直接由丙烯酸胶涂布而成）：如3M467、3M468、3M9473等；PET基材双面胶（由PET基材双面涂布丙烯酸胶组成）：如3M9495MP、3M9795B、3M9495LE等；泡棉基材双面胶（由泡棉基材双面涂布丙烯酸胶组成）：如3M4920、3M4026、3M4032等；热熔胶膜：如3M615、3M668、3M669等；耐高温胶带：如3M244等；编辑本段如何选购3M双面胶3M双面胶广泛应用于电脑、手机、通讯、家用电器、视听设备、汽车等产品中，应根据应用的产品及环境需要选择，可参考以下说明：1、无纺布基材双面胶粘性及加工性好，一般长期耐温70-80℃，短期耐温100-120℃，厚度一般为0.08-0.15MM，适合于铭板，塑胶之贴合，汽车，手机，电器，海棉，橡胶，标牌，纸品，玩具等行业，家电和电子仪器零件组装，显示屏镜片。

2、无基材双面胶具有优良的粘合效果能防止脱落与优异的防水性能，加工性好、耐温性好，短期可耐温204-230℃，一般长期耐温120-145℃，厚度一般为0.05-0.13MM，适合于铭板、面板、装饰件的粘接。

3、PET基材双面胶耐温性好、抗剪切性强，一般长期耐温100-125℃，短期耐温150-200℃，厚度一般为0.048-0.2MM，适合于铭板、LCD、装饰品、装饰件的粘接。

4、泡棉基材双面胶具有柔软、贴服性好、初粘性和持粘性好，抗溶剂性和抗紫外线好，一般厚度为0.4-1.0MM，短期耐温130-150℃，长期耐温80-93℃，适用于空调器、办公家具、通讯产品的粘接，可代替螺丝固定设计，使产品更美观。

5、热熔胶膜具有良好的一致性、均匀的粘接厚度，不含溶剂，易加工，对很多物体有良好的粘接性，厚度为0.1MM，颜色为半透明/琥珀色，热熔软化温度116-123℃。

3M胶资料-很齐全的背胶资料

100多种3M胶的规格产品名称：3M============================================产品名称：3M 4926/4936/4936F/4941/4941F/4956/4956F/4979F胶的厚度不含离型纸mm（Mils）：0.4(15)/0.64(25)/0.64(25)/1.1(45)/1.1(45)/1.6(62)/1.6(62)/1.6(62)特性：灰黑色，闭孔结构丙烯酸泡绵基材，服贴性高，适用一般涂漆表面，抗增塑剂。

通过UL746认证。

/黑色4956胶型：丙烯酸短期耐温性：149`C(300°F)长期耐温性：93`C(200°F）抗溶剂性：高相对粘性HSE：高相对粘性LSH：中主要用途：卡车子总装，电力机柜，广告标志，LCD，玻璃窗离型纸：A/A/B/A/D/A/B/B注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4932/4952胶的厚度不含离型纸mm（Mils）：0.64(25)/1.1(45)特性：白色闭孔结构丙烯酸基材，适用于PP或粉末喷涂表面胶型：合成短期耐温性：93`C(200°F)长期耐温性：71`C(160°F）抗溶剂性：高相对粘性HSE：高相对粘性LSH：高主要用途：办公家具，车辆总装，建筑标志离型纸：A/A注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4951胶的厚度不含离型纸mm（Mils）：1.1(45)特性：白色闭孔结构丙烯酸基材，适用施工温度可低至0`C胶型：丙烯酸短期耐温性：149`C(300°F)长期耐温性：93`C(200°F）抗溶剂性：高相对粘性HSE：高相对粘性LSH：低主要用途：建筑低温操作的应用离型纸：C注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4943F/4957F胶的厚度不含离型纸mm（Mils）：1.1(45)/1.6(62)特性：灰色，高贴服性泡绵胶型：丙烯酸短期耐温性：149`C(300°F)长期耐温性：93`C(200°F）抗溶剂性：高相对粘性HSE：高相对粘性LSH：低主要用途：蜂窝电话天线，电子收费装置离型纸：C/C注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4905/4910胶的厚度不含离型纸mm（Mils）：0.5(20)/1.0(40)特性：透明闭孔结构基材非常适用于透明材质之粘接胶型：丙烯酸短期耐温性：149`C(300°F)长期耐温性：93`C(200°F）抗溶剂性：高相对粘性HSE：高相对粘性LSH：低主要用途：阳光顶内外层密封，玻璃门把手离型纸：D/D注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4920/4930/4950/4955/4959胶的厚度不含离型纸mm（Mils）：0.4(15)/0.64(25)/1.1(45)/2.0(80)/3.0(120)特性：白色，闭孔结构丙烯酸基材，通用型号。

3m425铝箔胶带技术参数

3m425铝箔胶带技术参数1.前言3M425铝箔胶带是一种高性能胶带，广泛应用于各种工业和建筑领域。

本文将详细介绍3M425铝箔胶带的技术参数，包括其材料、尺寸、粘性、耐温性等方面的信息。

2.产品描述3M425铝箔胶带是一种由3M公司开发的高质量胶带，由铝箔和特殊胶粘剂组成。

它具有以下突出特点：2.1.耐用性3M425铝箔胶带采用优质铝箔作为基材，具有良好的耐腐蚀性和耐热性。

它可以承受高温、高湿、低温以及化学腐蚀等极端环境条件，保持良好的粘附性能。

2.2.优异的粘附性该胶带使用特殊的胶粘剂，能够在多种表面上提供优异的粘附力。

无论是金属、塑料还是玻璃等材料，3M425铝箔胶带都能牢固粘贴，不易脱落或损坏。

2.3.高可靠性由于其卓越的特性，3M425铝箔胶带广泛应用于航空航天、电子电器、建筑和汽车等领域。

它能够提供长期稳定的性能，确保设备和结构的可靠性和安全性。

3.技术参数3M425铝箔胶带具有以下技术参数：3.1.材料-基材：高纯度铝箔-胶粘剂：特殊胶粘剂3.2.物理性能-厚度：约0.12m m-宽度：常见规格为25mm、50m m、75mm-长度：常见规格为50m、100m、150m-颜色：银色3.3.粘性-初始粘性：高-持久粘性：优异3.4.耐温性-最高耐温：约165°C-最低耐温：约-40°C3.5.耐化学腐蚀性该铝箔胶带表现出极佳的耐化学腐蚀性，具有对常见溶剂、酸碱等化学物质的抵抗能力。

3.6.其他特性-阻燃性：达到U L723标准-热导率：高，适合用于导热和散热应用-寿命：长，可达数年4.应用领域3M425铝箔胶带广泛应用于各个领域，包括但不限于以下应用场景：-电子电器：电子元件的屏蔽。

如电路板的E MI屏蔽、嵌入式电子元件的保护等。

-建筑：建筑隔热、防潮、封闭等领域。

如天花板隔热、管道绝热、墙壁隔音等。

-汽车工业：汽车零部件的防潮、抗腐蚀、隔热等。

如空调通风管道、车身防潮层、引擎隔热等。

[VIP专享]3M胶资料-很齐全的背胶资料

通过UL746认证。

3m胶带粘接成分

3m胶带粘接成分
3M胶带是一种常见的粘接材料，它有着广泛的应用领域。

3M胶带的粘接成分包括以下几种：
1. 压敏胶：3M胶带的主要粘接成分是压敏胶。

它是一种聚合物材料，可以被迅速粘在不同类型的表面上。

压敏胶在低压下就能形成粘合，因此被称为“压敏”。

2. 基材：3M胶带的基材是一种带电聚合物薄膜，可以提供一定的机械强度和耐久性。

同时，它的柔韧性和透明性也是它广泛应用的原因之一。

3. 添加剂：3M胶带中的添加剂可以提高其耐热性、耐水性和耐化学腐蚀性。

添加剂通常是一些化学物质，如丙烯酸、硅烷等。

总的来说，3M胶带的粘接成分是一种复杂的化学体系，其中压敏胶是最主要的成分。

3M胶带的性能取决于这些成分的组合和配比，因此在不同的应用场合下需要选择不同类型的3M胶带。

- 1 -。

3M双面胶型号及特点介绍

3M双面胶型号及特点介绍1.3MVHB系列3M VHB（Very High Bond）系列双面胶采用特殊的高黏合性压敏胶粘剂，在结构胶粘应用中具有出色的粘接性能。

它能够高效地粘接许多种不同的材料，包括金属、塑料、玻璃和复合材料等。

其特点包括：-高黏合力:3MVHB系列双面胶具有非常高的黏合力，能够提供强大的粘接效果，确保粘接件之间的牢固连接。

-耐候性强：VHB系列双面胶能够承受各种恶劣的环境条件，包括高温、低温和湿度等，保持其粘接强度和稳定性。

-弹性：VHB系列双面胶具有一定的弹性，能够在材料的热胀冷缩或振动等情况下提供一定的缓冲和吸能能力。

-透明度高：一些型号的VHB系列双面胶具有极高的透明度，可以实现透明材料的无缝粘接。

2. 3M Scotch系列3M Scotch系列双面胶是一种多功能的双面粘合剂，适用于各种轻负载应用。

它主要包括以下几个型号：- 3M Scotch 665双面胶：这是一种透明的双面胶，特别适用于办公室和家庭用途。

它采用亚光表面处理技术，具有出色的粘接效果，不易产生气泡和残留胶痕。

- 3M Scotch 9088双面胶：这是一种高黏合力的双面胶，适用于许多不同的材料，包括金属、塑料和纸张等。

它具有优异的粘接性能和耐温性能，在高温环境下仍能保持良好的粘接效果。

- 3M Scotch 9448双面胶：这是一种柔软的双面胶，适用于各种低表面能材料，如塑料薄膜和泡沫等。

它具有优异的粘接力和耐候性能，适用于户外和室内应用。

3.3M玻璃胶系列3M玻璃胶系列是专门用于粘接和密封玻璃和其他透明材料的双面胶。

它主要包括以下几个型号：-3M1160双面胶：这是一种特殊的高粘合力双面胶，适用于高透明度的粘接和密封应用。

它可以与玻璃和许多其他透明材料粘接，并提供出色的防水和防尘效果。

-3M4492双面胶：这是一种高黏合力的双面胶，适用于玻璃和其他透明材料的粘接。

它具有良好的强度和粘接性能，可以应对各种户外和室内环境。

常用3M胶物料特性

3M467产品介绍：3M467是3M双面胶中一款无基材双面胶，由丙希酸胶直接涂布制成，胶带颜色为透明，属于3M4673M200MP系列胶系，规格为：1219MM*55M*0.06MMT，厚度较薄，仍具有优良的粘合效果，能防止脱落与优异的防水性能，加工性好、耐温性好，有较好的持粘力；离型纸为聚合物涂层的防水牛皮纸，在高湿环境中也不会打皱；耐温性好，长期耐温149℃,短期耐温可达204℃；1、90度剥离胶粘度（牛/100MM），测试方法：ASTM D3330贮存期限：在21℃和50%相对湿度条件下，原包装状态下自生产之日起保存期为24个月。

应用技术：粘接强度随胶粘剂与被粘表面接触面积的增大而增加，施加稳定的压力有助于胶粘剂与被粘表面的接触，从而加大粘接强度。

要达到最佳的粘接效果，粘接表面必须是洁净、干燥的，胶带应用的最佳温度范围是21-38℃,建议若初始粘接温度低于10℃时，不适于粘接，因此时的胶粘剂太硬，而无法牢固的粘接在物体上；但是，如果已经粘接上了，低温下的持粘力同样是令人满意的。

产品应用：3M467双面胶在环保方面符合ROHS法规要求，用于面板的粘贴、金属铭牌、薄膜开关、电器零件、防震泡棉的粘贴等。

3M468产品介绍：3M468是3M双面胶中一款无基材双面胶，由丙希酸胶直接涂布制成，胶带颜色为透明，属于3M4683M200MP系列胶系，规格为：1219MM*55M*0.13MMT，仍具有优良的粘合效果，能防止脱落与优异的防水性能，加工性好、耐温性好，有较好的持粘力；离型纸为聚合物涂层的防水牛皮纸，在高湿环境中也不会打皱；耐温性好，长期耐温149℃,短期耐温可达204℃；1、90度剥离胶粘度（牛/100MM），测试方法：ASTM D3330贮存期限：在21℃和50%相对湿度条件下，原包装状态下自生产之日起保存期为24个月。

应用技术：粘接强度随胶粘剂与被粘表面接触面积的增大而增加，施加稳定的压力有助于胶粘剂与被粘表面的接触，从而加大粘接强度。

3M胶带物性表

3M胶带物性表3Transparent Polyester T ape 336Product Description 3M?Transparent Polyester Tape 336 has a very low tack adhesive system for useas a protective tape to protect polished metal and plastic surfaces with minimum adhesion build-up and clean removal. Technical Data Product Construction BackingAdhesive Color Polyester film Rubber Transparent Features ?Adhesion levels can increase from any of the following conditions:-Extended exposure to direct sunlight-High stacking pressures-Extended application to copper bearing surfacesSharp dies must be used when stamping parts protected with 3M tape 336 since dull dies result in nicked edges which cause tape slivering upon removal.?This tape can be used for extended periods of time up to 150°F (66°C) and for 30 minutes or less at 250°F (121°C).Application Ideas ?Protection from fumes and splash during plating processes on the upper portionof printed wiring boards. 3M tape 336 has a lower adhesive tack level than 3M?Fume Protection T ape 1290 which can also be used for this application.?Protection of polished stainless steel and aluminum in fabrication, shipping, and storage.Protection of nameplates and instrument panels during shipping and installation.?Protection of finished non-metallic surfaces.Protection of non-image side of inner layers of multilayer printed wiring boards.ASTM Test MethodAdhesion to Steel:1 oz./in. width (1 N/100 mm)D-3330T ensile Strength at Break:24 lbs./in. width (420 N/100 mm)D-3759Elongation at Break:95%D-3759Backing Thickness:1 mil (0.025 mm)D-3652T otal Tape Thickness: 1.4 mils (0.04 mm)D-3652Typical PhysicalProperties Note:The following technical information and data should be considered representativeor typical only and should not be used for specification purposes.3M ?Transparent Polyester Tape 336Storage Store under normal conditions of 60°to 80°F (16°to 27°C) and 40 to 60% R.H. in the original carton.Shelf Life To obtain best performance, use this product within 12 months from date ofmanufacture.All statements, technical information and recommendations contained in this document are based upontests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.Product Use Unless stated otherwise in 3M’sproduct literature, packaging inserts or product packaging for individualproducts, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature,package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANT ABILITY OR FITNESS FOR A P ARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price.Warranty and Limited Remedy Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.Limitation of Liability This Industrial Adhesives and T apes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards.Printed in U.S.A.3M 70-0709-0909-1(1999/6/05)Recycled Paper 40% pre-consumer10% post-consumer 3Industrial Business Industrial Adhesives and Tapes Division 3M Center, Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55144-1000800-362-3550 ? 877-369-2923 (fax)/industrial。

3M 胶带物性表

3Transparent Polyester T ape 336Product Description 3M™Transparent Polyester Tape 336 has a very low tack adhesive system for useas a protective tape to protect polished metal and plastic surfaces with minimum adhesion build-up and clean removal. Product Construction BackingAdhesive Color Polyester film Rubber Transparent Features •Adhesion levels can increase from any of the following conditions:-Extended exposure to direct sunlight-High stacking pressures-Extended application to copper bearing surfaces•Sharp dies must be used when stamping parts protected with 3M tape 336 since dull dies result in nicked edges which cause tape slivering upon removal.•This tape can be used for extended periods of time up to 150°F (66°C) and for 30 minutes or less at 250°F (121°C).Application Ideas •Protection from fumes and splash during plating processes on the upper portionof printed wiring boards. 3M tape 336 has a lower adhesive tack level than 3M™Fume Protection Tape 1290 which can also be used for this application.•Protection of polished stainless steel and aluminum in fabrication, shipping, and storage.•Protection of nameplates and instrument panels during shipping and installation.•Protection of finished non-metallic surfaces.•Protection of non-image side of inner layers of multilayer printed wiring boards.ASTM Test MethodAdhesion to Steel:1 oz./in. width (1 N/100 mm)D-3330T ensile Strength at Break:24 lbs./in. width (420 N/100 mm)D-3759Elongation at Break:95%D-3759Backing Thickness:1 mil (0.025 mm)D-3652T otal Tape Thickness: 1.4 mils (0.04 mm)D-3652Typical PhysicalProperties Note:The following technical information and data should be considered representativeor typical only and should not be used for specification purposes.3M ™Transparent Polyester Tape 336Storage Store under normal conditions of 60°to 80°F (16°to 27°C) and 40 to 60% R.H. in the original carton.Shelf Life To obtain best performance, use this product within 12 months from date ofmanufacture.All statements, technical information and recommendations contained in this document are based upontests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.Product Use Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individualproducts, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature,package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANT ABILITY OR FITNESS FOR A P ARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price.Warranty and Limited Remedy Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.Limitation of Liability This Industrial Adhesives and T apes Division product was manufactured under a 3M quality system registered to ISO9001:2000 standards.Printed in U.S.A.©3M 70-0709-0909-1(1999/6/05)Recycled Paper 40% pre-consumer10% post-consumer 3Industrial Business Industrial Adhesives and Tapes Division3M Center, Building 21-1W-10, 900 Bush Avenue St. Paul, MN 55144-1000800-362-3550 • 877-369-2923 (fax)/industrial。

M胶很齐全的背胶资料

通过UL746认证。

/黑色4956 胶型：丙烯酸短期耐温性：149`C(300°F)长期耐温性： 93`C(200°F）抗溶剂性：高相对粘性HSE：高相对粘性LSH：中主要用途：卡车子总装，电力机柜，广告标志，LCD，玻璃窗离型纸：A/A/B/A/D/A/B/B注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4932/4952胶的厚度不含离型纸mm（Mils）：0.64(25)/1.1(45)特性：白色闭孔结构丙烯酸基材，适用于PP或粉末喷涂表面胶型：合成短期耐温性：93`C(200°F)长期耐温性：71`C(160°F）抗溶剂性：高相对粘性HSE：高相对粘性LSH：高主要用途：办公家具，车辆总装，建筑标志离型纸：A/A注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4951特性：白色闭孔结构丙烯酸基材，适用施工温度可低至0`C胶型：丙烯酸短期耐温性：149`C(300°F)长期耐温性： 93`C(200°F）抗溶剂性：高相对粘性HSE：高相对粘性LSH：低主要用途：建筑低温操作的应用离型纸：C注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4943F/4957F胶的厚度不含离型纸mm（Mils）：1.1(45)/1.6(62)特性：灰色，高贴服性泡绵胶型：丙烯酸短期耐温性：149`C(300°F)长期耐温性： 93`C(200°F）抗溶剂性：高相对粘性HSE：高相对粘性LSH：低主要用途：蜂窝电话天线，电子收费装置离型纸：C/C注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4905/4910胶的厚度不含离型纸mm（Mils）：0.5(20)/1.0(40)特性：透明闭孔结构基材非常适用于透明材质之粘接胶型：丙烯酸短期耐温性：149`C(300°F)长期耐温性： 93`C(200°F）抗溶剂性：高相对粘性HSE：高主要用途：阳光顶内外层密封，玻璃门把手离型纸：D/D注：离型纸种类A-3mil 54#高密度牛皮离型纸B-5mil 透明PE膜C-2mil PET膜D-5mil 红色PE膜E-4mil 58# PE涂布牛皮离型纸……………………………………………………………………………………………………………………………………………………………产品名称：3M 4920/4930/4950/4955/4959胶的厚度不含离型纸mm（Mils）：0.4(15)/0.64(25)/1.1(45)/2.0(80)/3.0(120)特性：白色，闭孔结构丙烯酸基材，通用型号。

3M胶性能参数---5925,5952,5962

3MVHB TM 强力胶带 59255925,5952,5962,5952,5962,5952,5962产品数据表2005年2月产品描述3M TM VHB TM 强力丙烯酸泡绵胶带5925，5952和5962是双面均有丙烯酸粘合剂的丙烯酸泡绵胶带，适合粘接各种不同的基材，包括低表面能材料如粉末喷涂漆面和塑料等。

丙烯酸泡绵贴附性好，可以提高与被粘材料的接触面积。

粘合剂类型合成胶粘剂基材丙烯酸泡绵（闭孔）厚度厚度（ASTM D-3652）5925 5952 59620.64毫米 1.1毫米 1.55毫米泡棉泡棉密度密度5925 5952 5962590 千克/立方米 590 千克/立方米 640 千克/立方米离型纸红色聚乙烯离型膜胶带颜色黑色物理特性不作规格用保存期限自装运之日起，在温度为21℃（70℉）、相对湿度为50％的原包装箱中可存储24个月性能特征不作规格用不锈钢的剥离粘结力5925 5952 5962 300 牛/100毫米 350 牛/100毫米 350 牛/100毫米拉伸力拉伸力（（T 型块型块））5925 5952 5962 90磅/平方英寸（620千帕） 90磅/平方英寸（620千帕） 90磅/平方英寸（620千帕）动态剪切强度（不锈钢） 5925 5952 5962 90磅/平方英寸（620千帕） 80磅/平方英寸（550千帕） 80磅/平方英寸（550千帕）静态剪切强度（不锈钢）22℃ 68℃ 93℃ 121℃1500克/0.5平方英寸（10000分钟） 500克/0.5平方英寸（10000分钟） 500克/0.5平方英寸（10000分钟） 250克/0.5平方英寸（10000分钟）耐溶剂性高温度性能最高（分钟/小时）最高连续温度（天/周）150℃ 93℃2标准长度592559525962 72码（65.8米）36码（32.9米）36码（32.9米）最小宽度1/4英寸（6.4毫米）胶带尺寸卷芯尺寸 3.0英寸（76.2毫米）应用指南为获得最佳的粘合效果，粘结表面必须清洁、干燥且平整。

常用的3M胶带介绍！

常⽤的3M胶带介绍！3M胶带是我们在模切⽣产中常常会⽤到的⼀种胶带品牌，其种类⾮常繁多，今天⼩编就为您介绍⼀下⼏种常⽤的3M胶带。

V H B胶带3M VHB 胶带为全丙烯酸材料，在条件苛刻的应⽤中能够提供所需的强度和耐候性，⽽且其优异的粘弹性，可吸收冲击⼒。

且看不见的胶带帮助保持表⾯平整度和清洁，改善设计和外观。

4604产品编号：4604 厚度：0.400 基材：⽩⾊泡棉特点与应⽤：厚双⾯胶带。

低温环境下，初粘性也不错。

胶带较柔软，⽐较适合粘接凹凸表⾯。

4608产品编号：4608 厚度：0.800 基材：⽩⾊泡棉特点与应⽤：厚双⾯胶带。

低温环境下，初粘性也不错。

胶带较柔软，⽐较适合粘接凹凸表⾯。

4914产品编号：4914 厚度：0.250基材：⽩/⿊/灰/透明泡棉特点与应⽤：⾼粘接强度，⾼剪切强度，及优异的防⽔性能。

⽤于塑料外框粘接，固定电池于电池座，扫描仪外壳与玻璃的粘接。

4920产品编号：4920 厚度：0.375基材：⽩/⿊/灰/透明泡棉特点与应⽤：⾼粘接强度，⾼剪切强度，及优异的防⽔性能。

⽤于塑料外框粘接，固定电池于电池座，扫描仪外壳与玻璃的粘接。

4930产品编号：4930 厚度：0.625 基材：⽩⾊泡棉特点与应⽤：通⽤型的厚双⾯胶带，相对于薄双⾯胶带更为优异的剥离强度和耐UV性。

4941产品编号：4941 厚度：1.100 基材：灰⾊泡棉特点与应⽤：⾼粘接强度，贴附性好，对许多涂料⾦属的贴附性强。

耐增塑剂。

适合粘接窗框条，管道等。

4945产品编号：4945 厚度：1.100 基材：⽩⾊泡棉特点与应⽤：⾼粘接强度，贴附性好，对许多涂料⾦属的贴附性强。

耐增塑剂。

适合粘接⼄烯装饰物等。

4951产品编号：4951 厚度：1.100 基材：⽩⾊泡棉特点与应⽤：⾼粘接强度，使⽤温度最低可达０摄⽒度。

适⽤于粘接⾯板到建筑物，卡车或拖车的铝框架上。

双⾯胶带3M双⾯胶带，对塑料和⾦属材料，甚⾄粉末喷涂(如：UV喷涂的表⾯)或⼀些难粘表⾯具有优异的粘附性以两⾯相同胶粘剂之双⾯胶带。

3m胶带粘接成分

3m胶带粘接成分
3M胶带是一种高性能胶带，它由多种不同的成分组成。

其中最常见的成分是聚丙烯和亚克力。

聚丙烯是一种热塑性材料，具有优异的耐化学性和耐热性能。

亚克力则是一种具有优异附着力和耐候性的聚合物。

除此之外，3M胶带还包含了一些特殊的添加剂，如增塑剂、稳定剂、抗氧化剂等。

这些添加剂可以提高胶带的柔韧性、耐老化性和耐用性。

总的来说，3M胶带的复杂成分使其成为了一种高性能胶带，具有优异的粘接性能和耐用性能，广泛应用于各种工业和生活领域。

- 1 -。

常用3M胶物料特性

3M VHB 胶带 物性表

实用文档之3M各类常用胶带型号及其简介

3M双面胶型号及特点介绍

3M胶带特性及其应用

3M双面胶型号及特点介绍

常用3M不干胶及其他不干胶的物性和用途

3M胶

3M胶资料-很齐全的背胶资料

3m425铝箔胶带技术参数

[VIP专享]3M胶资料-很齐全的背胶资料

3m胶带粘接成分

3M双面胶型号及特点介绍

常用3M胶物料特性

3M胶带物性表

3M 胶带 物性表

M胶很齐全的背胶资料

3M胶性能参数---5925,5952,5962

常用的3M胶带介绍！

3m胶带粘接成分

3M VHB 胶带物性表

3M 胶带物性表