ES-ST25

合集下载

ST单片机选型指南

ST单片机选型指南

ST单片机选型指南1.应用需求:首先要明确您的应用需求。

不同的应用有不同的要求,包括性能、功耗、存储容量和接口等。

确定清楚您的应用要求,有助于选择适合的ST单片机。

2.性能要求:单片机的性能包括处理能力、运行速度和存储容量等。

ST单片机产品系列覆盖从低端到高端的不同性能级别,可以根据您的需求选择相应的型号。

3. 存储器:单片机的存储器包括闪存(Flash)和随机存取存储器(RAM)。

闪存用于存储程序代码和数据,而RAM 用于临时存储数据。

根据应用需求选择适当的存储容量。

4.接口类型和数量:单片机的接口类型和数量决定了与外部设备的连接能力。

ST单片机通常提供多个通用输入/输出接口(GPIO)和各种接口标准,包括串行接口(SPI、I2C和USART)、模拟接口和定时器接口等。

根据应用需求,选择适当的接口类型和数量。

5.功耗和效率:功耗是选择单片机的重要考虑因素之一、根据应用场景选择低功耗或超低功耗型号,有助于延长电池寿命或减少功耗。

6.开发工具和文档支持:ST单片机提供丰富的开发工具和文档支持,包括集成开发环境(IDE)、调试工具和参考文档等。

确保选择的单片机有充足的开发工具和文档支持,可以提高开发效率。

7.价格和供货:价格是选择单片机的一个重要考虑因素。

ST单片机在性价比方面具有竞争力,并且具有广泛的供货渠道,确保产品的可靠供货。

基于以上考虑因素,以下是一些常用的ST单片机系列和型号:1. STM32系列:STM32是ST 单片机系列中最受欢迎的产品之一、它基于ARM Cortex-M 内核,提供强大的处理能力和丰富的外设接口。

STM32系列包括多个系列和型号,适用于各种应用场景。

2.STM8系列:STM8是ST单片机系列中的另一个重要产品系列。

它提供低成本、低功耗和高性能的解决方案,适用于多种应用场景。

3.ST7系列:ST7是ST单片机系列中的传统产品系列。

它提供广泛的产品型号和接口标准,适用于各种应用场景。

LT8637 42V, 5A Synchronous Step-Down Silent Switch

LT8637 42V, 5A Synchronous Step-Down Silent Switch

1Rev. 0DESCRIPTIONLT863742V, 5A Synchronous Step-Down Silent Switcherwith 2.5μA Quiescent CurrentDemonstration circuit 3020A is a 42V, 5A (7A Peak) syn-chronous step-down Silent Switcher ® with spread spec-trum frequency modulation featuring the L T ®8637. The demo board is designed for 5V output from a 5.8V to 42V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial sup-plies. The LT8637 is a compact, low emission, high effi-ciency, and high frequency synchronous monolithic step-down switching regulator . The LT8637 is the same as the LT8636, except it has a VC pin for external compensation. This allows the customer to optimize the loop response, or to parallel multiple regulators for higher current appli-cations. The proprietary Silent Switcher architecture mini-mizes electromagnetic emissions with simplified filter and reduced layout sensitivity. Selectable spread spectrum mode further improves EMI performance, making it per-fect solution to the noise sensitive applications. The regu-lator’s ultralow 2.5μA quiescent current–with the output in full regulation–enables applications requiring highest efficiency at very light load currents, such as automotive and battery powered portable instruments.Peak current mode control with minimum on-time of as small as 30ns allows high step-down conversion even at high frequency. The LT8637 switching frequency can be programmed either via oscillator resistor or external clockAll registered trademarks and trademarks are the property of their respective owners.PERFORMANCE SUMMARYover a 200kHz to 3MHz range. The default frequency of demo circuit 3020A is 2MHz.The SYNC/MODE pin on the demo board DC3020A is grounded (JP1 at BURST position) by default for low ripple Burst Mode ® operation. To synchronize to an external clock, move the Jump JP1 to SYNC/FCM and apply the external clock to the SYNC terminal ON THE 3020A. In sync mode, the part runs in forced continuous mode. Without external clock applied, the SYNC/MODE pin is floating, and the part runs in forced continuous mode. This mode offers fast transient response and full frequency operation over a wide load range. Alternatively, move the Jump JP1 to the SPREAD-SPECTRUM, and the SYNC/MODE is tied to INTVCC, the part runs in forced continuous mode with spread spectrum function enabled. The LT8637 data sheet gives a complete description of the part, operation and application information. The data sheet must be read in conjunction with this demo manual for demo circuit 3020A. The layout recommendations for low EMI operation and best thermal performance are available in the data sheet section Low EMI PCB Layout and Thermal Considerations and Peak Output Current. Contact ADI applications engineer for support.Design files for this circuit board are available .Specifications are at T A = 25°CSYMBOL PARAMETERCONDITIONSMIN TYPMAX UNITSV IN_EMI Input Supply Range with EMI Filter 5.842V V OUT Output Voltage4.855 5.15V I OUT Maximum Output Current Derating is Necessary for Certain V IN and Thermal Conditions 5Af SW Switching Frequency 1.852 2.15MHz EFFEfficiencyV IN = 12V, I OUT = 3A94.4%QUICK START PROCEDUREDemonstration circuit 3020A is easy to set up to evalu-ate the performance of the LT8637. Refer to Figure 1 for proper measurement equipment setup and follow the procedure below:NOTE: When measuring the input or output voltage ripple, care must be taken to avoid a long ground lead on the oscilloscope probe. Measure the output voltage ripple by touching the probe tip directly across the output capacitor.1. Make sure the Jump JP1 is on the BURST position. Refer to the schematic.2. With power off, connect the DC power supply to VEMI and GND. Connect the load from VOUT to GND.3. Connect the voltage meter across the VIN_SENSE and GND for V IN measurement, and VOUT_SENSE and GND for V OUT measurement.4. Turn on the power at the input.NOTE: Make sure that the input voltage does not exceed 42V.5. Check for the proper output voltage (V OUT = 5V). NOTE: If there is no output, temporarily disconnect theload to make sure that the load is not set too high or is shorted.6. Once the proper output voltage is established, adjust the load within the operating ranges and observe the output voltage regulation, ripple voltage, efficiency and other parameters. For efficiency measurement, use the VIN_SENSE, GND, and VOUT_SENSE, GND accordingly.7. An external clock can be added to the SYNC terminal when SYNC function is used (JP1 on the SYNC position). When JP1 is in SYNC, and no external clock is connected to the SYNC terminal of the board, the SYNC/FCM pin is floating, and the LT8637 runs in forced continuous mode. JP1 can also set LT8637 in spread spectrum mode (JP1 on the SPREAD-SPECTRUM position).Figure 1. Proper Measurement Equipment Setup2Rev. 0QUICK START PROCEDUREEfficiency, 12V IN, FCMFigure 2. Efficiency vs Load Current, 12V IN, V OUT = 5VCISPR25 Radiated Emission Test with Class 5 Average LimitsFigure 3. Radiated Emission Test with CISPR 25, Average Limit, SS Mode. V IN = 14V, I OUT = 5A, V OUT = 5V3Rev. 0PARTS LISTITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBERRequired Circuit Components11C1CAP., 22µF, ALUM. ELECT., 63V, 20%, 6.3mm × 7.7mm, CE-BS SUN ELECTRONIC INDUSTRIES CORP, 63CE22BS 23C2, C10, C11CAP., 10µF, X7R, 50V, 10%, 1210, NO SUBS. ALLOWED MURATA, GRM32ER71H106KA12L32C3, C4CAP., 1µF, X5R, 50V, 10%, 0603AVX, 06035D105KAT2A41C5CAP., 0.1µF, X7R, 16V, 10%, 0603WURTH ELEKTRONIK, 885012206046 51C6CAP., 10pF, X7R, 50V, 10%, 0603AVX, 06035C100KAT2A61C7CAP., 100µF, X5R, 6.3V, 10%, 1206MURATA, GRM31CR60J107KE39L72C8, C16CAP., 1µF, X7R, 10V, 10%, 0603AVX, 0603ZC105KAT2A83C12, C13, C15CAP., 0.1µF, X7R, 50V, 10%, 0402AVX, 04025C104KAT2A91C17CAP., 560pF, C0G, 50V, 5%, 0603AVX, 06035A561JAT2A101C18CAP., 68pF, C0G, 50V, 5%, 0603AVX, 06035A680JAT2A111FB1IND., 30Ω AT 100MHz, FERRITE BEAD, 25%, 5A, 10mΩ, 0603TDK, MPZ1608S300ATAH0121L1IND., 2.2µH, 20%, 18.1A, 6.70mΩ, 6.56mm × 6.36mm,COILCRAFT, XEL6060-222MEBXEL6060, AEC-Q200131L2IND., 0.33µH, 20%, 19.2A, 3.52mΩCOILCRAFT, XAL5030-331MEB142R1, R4RES., 100k, 1%, 1/10W, 0603, AEC-Q200VISHAY, CRCW0603100KFKEA151R2RES., 17.8k, 1%, 1/10W, 0603, AEC-Q200NIC, NRC06F1782TRF161R3RES., 243k, 1%, 1/10W, 0603VISHAY, CRCW0603243KFKEA171R6RES., 1M, 1%, 1/10W, 0603, AEC-Q200VISHAY, CRCW06031M00FKEA181R7RES., 0Ω, 1/10W, 0603, AEC-Q200VISHAY, CRCW06030000Z0EA191R9RES., 8.06k, 1%, 1/10W, 0603YAGEO, RC0603FR-078K06L201U1IC, SYN. STEP-DOWN Silent Switcher, LQFN-20, 42V, 5A/7A ANALOG DEVICES, LT8637EV#PBF Additional Demo Board Circuit Components10R8RES., OPTION, 0603Hardware: For Demo Board Only14E2, E9, E11, E12TEST POINT, TURRET, 0.064" MTG. HOLE, PCB 0.062" THK MILL-MAX, 2308-2-00-80-00-00-07-0 26E4-E8, E10TEST POINT, TURRET, 0.094" MTG. HOLE, PCB 0.062" THK MILL-MAX, 2501-2-00-80-00-00-07-0KEYSTONE, 575-4 34J1-J4CONN., BANANA JACK, FEMALE, THT, NON-INSULATED,SWAGE, 0.218"41JP1CONN., HDR., MALE, 2 × 3, 2mm, VERT, STR, THT WURTH ELEKTRONIK, 6200062112154MH1-MH4STANDOFF, NYLON, SNAP-ON, 0.50"WURTH ELEKTRONIK, 70293500061XJP1CONN., SHUNT, FEMALE, 2-POS, 2mm SAMTEC, 2SN-BK-G4Rev. 05Rev. 0Information furnished by Analog Devices is believed to be accurate and reliable. However , no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.SCHEMATIC DIAGRAMP h o n e : (4086Rev. 0ANALOG DEVICES, INC. 202103/21ESD CautionESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.Legal Terms and ConditionsBy using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc. (“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONL Y. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer , assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “Third Party” includes any entity other than ADI, Customer , their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer . Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT . ADI SPECIFICALL Y DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT , OR CONSEQUENTIAL DAMAGES RESUL TING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT . Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW . This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.。

马秋富博士▏Nature针刺驱动迷走神经-肾上腺抗炎通路的神经解剖学基础一文对针灸的意义主。。。

马秋富博士▏Nature针刺驱动迷走神经-肾上腺抗炎通路的神经解剖学基础一文对针灸的意义主。。。

部、浮络、孙络、络脉、何经筋、何经络、何脏何腑⋯(神经分布情况细节)等等因素都会影响到⽳位的特异性.治好病对病⼈很关键,为什么治好了对医者很关键!我们是否常常由于同样的⽅法、同样的病⼈⽽效果却不同⽽让我们困惑? 或者困扰于对不抱太⼤希望的普通操作/熊孩⼦操作/死马当作活马医的操作/试试看的操作等能产⽣意想不到的疗效.这就是基础科研的重要!说⼩⽩⿏没⽤不如多搞临床是⽚⾯的.⼩⽩⿏的研究结果、发现就会使临床现象群疑冰释,反过来更好地指导临床实践.马秋富教授等团队的研究成果,或许不是针刺抗炎的全部内容,但却是针刺研究的⼀个⾥程碑性的⼤事件----终于将针刺抗炎精确到了神经元的⽔平!针刺研究会因此⼤发展,⼀些新的针刺思路、器械被研发!这个是很有临床指导意义的研究.针刺抗炎,有效,但之前实质不明,所以临床上会出现重复困难、理论很丰满、疗效很⾻感的的尴尬!现在实质之⼀(可能是)搞清了,则以后就可按图索骥百发百中、实现精准针灸!经络实质,困惑了⼏代⼈!神经元⽔平的抗炎效⽤的发现,相信对经络实质的研究也会产⽣影响.我们认为,完全解开NS之谜、完全解开NS和内分泌、免疫系统关系之谜、完全解开各种软组织、⾎管等和针刺关系之谜,就可以解开经络实质.附4-1马秋富教授在Nature, Cell和,Science上发表过的⽂章,共6篇M:马秋富,N:Nature,S:Science,T:Total,-:负⾯科学2004 年 12 ⽉ 24 ⽇;306(5705):2255-7。

doi:10.1126/science.1104935。

通过直接基因组规模的 TF 表达分析揭⽰⼩⿏⼤脑组织PMID:15618518 DOI:10.1126/science.1104935摘要在发育中的⼤脑中,转录因⼦ (TF) 指导着各种神经元和神经胶质细胞的形成。

我们在⼩⿏基因组中鉴定了 1445 个推定的 TF。

我们使⽤原位杂交来绘制超过 1000 个这些 TF 和 TF 调节基因在发育⼩⿏⼤脑中的表达。

st25android 实例

st25android 实例

st25android 实例ST25Android是一种基于安卓系统的应用程序,它通过与ST25系列芯片的交互,提供了一种简单而强大的方式来实现RFID技术的应用。

在本文中,我将介绍ST25Android的基本概念和功能,并且通过几个实例来展示其在不同领域的应用。

让我们来了解一下ST25Android的基本概念。

ST25Android是ST 公司推出的一种RFID技术应用程序,它通过与ST25系列芯片的交互,实现了RFID标签的读写功能。

ST25系列芯片是ST公司专为RFID应用设计的一种芯片,它具有高性能和低功耗的特点。

ST25Android应用程序利用安卓系统的开放性和灵活性,将RFID 技术的应用扩展到了移动设备上。

ST25Android应用程序具有多种功能,包括标签的读取、写入、锁定、解锁等。

它还支持不同类型的RFID标签,如ISO15693和ISO14443。

此外,ST25Android还提供了一套丰富的API,开发者可以利用这些API来实现自己的应用程序。

例如,开发者可以利用ST25Android的API来实现标签的批量读取,或者实现标签的批量写入。

通过这些功能,ST25Android为开发者提供了一个灵活而强大的平台,用于实现各种RFID应用。

接下来,让我们来看一下ST25Android在不同领域的应用实例。

首先是物流领域。

在物流领域,ST25Android可以用于快递包裹的追踪和管理。

通过将RFID标签附加在快递包裹上,并使用ST25Android进行标签的读取和写入,可以实现对包裹的实时跟踪和管理。

这样,物流公司可以更加精确地掌握货物的位置和状态,提高物流运输的效率和准确性。

另一个应用领域是零售领域。

在零售领域,ST25Android可以用于商品的库存管理和防伪。

通过将RFID标签附加在商品上,并使用ST25Android进行标签的读取和写入,可以实现对商品的实时库存管理。

这样,零售商可以更好地掌握商品的库存情况,提高销售效率和顾客满意度。

st芯片选型手册

st芯片选型手册

st芯片选型手册一、前言随着科技的不断发展,芯片已经成为了现代电子产品中不可或缺的一部分。

而ST芯片,作为业界领先的半导体公司意法半导体的产品,具有高性能、低功耗、可靠性高等特点,被广泛应用于各种领域。

为了帮助您更好地选择适合您应用的ST芯片,我们特地为您编写了这本ST芯片选型手册。

二、ST芯片分类ST芯片主要分为微控制器、模拟芯片、功率管理芯片、传感器等几大类。

1. 微控制器ST的微控制器基于ARM Cortex-M核,具有高性能、低功耗、易于编程等特点,适用于各种嵌入式系统应用。

2. 模拟芯片ST的模拟芯片包括放大器、比较器、转换器等,具有高精度、低噪声、低失真等特点,适用于信号处理和电源管理等领域。

3. 功率管理芯片ST的功率管理芯片包括DC-DC转换器、LED驱动器等,具有高效、低功耗、高集成度等特点,适用于各种电源管理系统。

4. 传感器ST的传感器包括陀螺仪、加速度计等,具有高精度、低成本、小尺寸等特点,适用于智能穿戴设备、游戏控制等领域。

三、选型流程1. 明确需求:首先需要明确您的应用需求,包括所需功能、性能指标、尺寸等。

2. 确定芯片类别:根据您的需求,确定所需的ST芯片类别,如微控制器、模拟芯片、功率管理芯片或传感器。

3. 选择合适型号:在相应类别中选择合适的ST芯片型号,考虑性能参数、封装形式等因素。

4. 参考数据手册:详细阅读所选型号的ST芯片数据手册,确保满足应用需求。

5. 评估与测试:对选定的ST芯片进行评估和测试,确保其性能符合预期。

6. 确定供应商:选择合适的供应商,确保ST芯片的供应和质量可靠。

7. 参考设计示例:根据需求,参考ST官方提供的设计示例,简化设计过程。

8. 开发与调试:按照设计进行开发与调试,确保ST芯片正常工作。

ES系列自动化传感器说明书

ES系列自动化传感器说明书

190DescriptionONSmall differenceESSeriesLong detecting distanceA separate amplifier gives the ES Series twice the detecting distance of self-contained proximity sensors.Detecting distance can be easily adjustedThe ES Series doesn’t need precise adjustments to sensor position during setup. Y ou canadjust the detecting distance using the adjustment trimmer after the sensor head is installed or during operation, when necessary.Featuresq Detecting distance twice that of conven-tional sensorsq Detecting distance easily adjustableq Wide range of sensor head types available q Built-in alarm outputDetecting DistanceShielded – Up to 8 mm Non-shielded – Up to 70 mmLong-distance Separate-amplifier Proximity SensorsLong-distance Separate-amplifier Proximity Sensors2.8 mm dia.3.8 mm dia.5.4 mm dia.5.4 mm dia.8 mm dia.8 mm dia.M10M10Shape Size Detecting distance ModelEH-110S EH-110EH-108EH-308S EH-308EH-305S EH-305EH-303A EH-3025 mm(2 mm)5 mm(2 mm) 5 mm(2 mm)3 mm(1 mm)3 mm(1 mm)2 mm(0.8 mm)1.2 mm(0.6 mm)5 mm(2 mm)2.5 mm(1.5 mm)Checking of part ID affixed to palletDetermination of transistor placementConfirmation of seating of piston to be drilledLong-distance Separate-amplifier Proximity SensorsPower supply OutputOutput mode Model ES-32DCES-X38N.O./ N.C. selectableN.O./ N.C. selectable NPN 200 mA (40 V) max.NPN 100 mA (40 V) max.10 to 28 VDC12 to 24 VDC de d l e i h S la c i r d n i l y C d e d a e r h T 203-H E A 303-H E 503-H E 803-H E 011-H E m m 6.0o t 0m m 8.0o t 0m m 1o t 0m m 2o t 0m m 5o t 0mm 2.1mm 2mm 3mm 5mm 8)s l a t e m s u o r r e f n o n r o f s c i t s i r e t c a r a h C e e s (s l a t e m s u o r r e F m m 5x 5m m 5x 5m m 5x 5m m 01x 01m m 01x 01m m 200.0m m 200.0m m 200.0m m 500.0m m 500.0m m 40.0mm 50.0mm 50.0mm 40.0mm 40.032+t a e c n a t s i d g n i t c e t e d f o )%02+o t 01-:203-H E (.x a m %01±°06+o t 01-(C °)C 76-P I 76-P I 76-P I 76-P I 76-P I 06+o t 01-°C 06+o t 01-°C 06+o t 01-°C 06+o t 01-°C 06+o t 01-°C g92.x o r p p A g83.x o r p p A g54.x o r p p A g74.x o r p p A g55.x o r p p A de d l e i h S d e d a e r h T n i h T t n a t s i s e r -l i O 411-H E A 416-H E 801-H E .1Long-distance Separate-amplifier Proximity Sensors ebu t l a r i pS;ded le i hS ded le i hs-noNl ac i r dn i l yC dedae r hT l ac i r dn i l yCdnal ac i r dn i l yCdedae r h tS53-HE S83-HE S11-HE24-HE614-HE mm1o t0mm2o t0mm2o t0mm3o t0mm6o t0 mm3mm5mm5mm7mm31)s l a t ems uo r r e f nonr o fs c i t s i r e t c a r ahCee s(s l a t ems uo r r eFmm5x5mm1x1mm1x1mm1x1mm2x2 mm20.0mm50.0mm50.0mm20.0mm210.0Long-distance Separate-amplifier Proximity SensorsBAIndicator lightsOptimal position Detecting range TrimmerTurns off when there is no targetTurns off when target is in placeES-X3810 to 28 VDCBrown Black12 to 24 VDCBlueOrange Sensor headShieldLoadLoad10 to 28 VDCBrownBlue12 to 24 VDCBlackOrange(Control output)(Alarm output)LoadLoad M a i n c i r c u i tInput/Output CircuitsES-X38NPNWith the target in place, turn the trimmer clockwise and find point A at which the output indicator lights. (If the output indicator is already lit, turn the trimmer counterclockwise.)With the target removed, again turn the trimmer clockwise and find point B at which the output indicator lights.Set the trimmer midway between points A and B. The output circuit will now actuate when the output indicator lights.NEAR-OFF operation1.With the target in place, turn the trimmer clockwise and find point A at which the output indicator turns off. (If the output indicator is already off, turn the trimmer counterclockwise.)2.With the target removed, again turn the trimmer clockwise and find point B at which the output indicator turns off.3.Set the trimmer midway between points A and B. The output circuit will now actuate when the output indicator lights.Both NEAR-ON and NEAR-OFF modes are availableNEAR-ON mode uses a normally open relay that closes when the target is detected. NEAR-OFF mode uses a normally closed relay that opens when the target is detected.Long-distance Separate-amplifier Proximity SensorsOperation mode selector switchUse a screwdriver to set the position of the operation mode selector switch, located in the lower part of the BOUTSENSMODEN.O N.CES-X38Output indicator Sensitivity adjustment trimmerNEAR-ON (N.O.)NEAR-OFF (N.C.)Operation mode selector switchB:NEAR-OFFOperation mode (N.C.)ES-X38:Set the operation mode selector switch provided on the panel.Sensor 0-2-1012D e t e c t i n g d i s t a n c e Y (m m )D e t e c t i n g d i s t a n c e Y (m m )Standard TargetX (mm)EH-302EH-303AX (mm)-1.51.5-1-0.50.5010.750.60.450.30.1510.80.60.40.250 %50 %100 %100 %Sensor headSensor headEH-308/308SEH-110/110S21.52.52.521.5100 %100 %t a n c e Y (m m )t a n c e Y (m m )100 %Detecting range (Typical)These graphs show variations in detecting distance measured by moving the target parallel to the sensor head for a distance 50% and 100% of the stable detectingLong-distance Separate-amplifier Proximity SensorsEH-422EH-430-15X (mm)976543211512.5107.552.50X (mm)-10-5510D e t e c t i n g d i s t a n c e Y (m m )D e t e c t i n g d i s t a n c e Y (m m )100 %50 %Sensor head100 %100 %EH-290EH-108504030201.51.2510.750.550 %e t e c t i n g d i s t a n c e Y (m m )e t e c t i n g d i s t a n c e Y (m m )Long-distance Separate-amplifier Proximity SensorsEH-614A654321Detecting distance adjusted to 5 mm using 40 mm steel plateAluminum CopperBrass IronStainless steelD e t e c t i n g d i s t a n c e Y (m m )Detecting distance adjusted to 5 mm using 40 mm steel plateCopperBrass IronStainless steelEH-40243.532.521.510.5D e t e c t i n g d i s t a n c e Y (m m )Detecting distance adjusted to 3 mm using 20 mm steel plateAluminumCopperBrass IronStainless steelAluminum EH-422EH-430161412108610.597.564.56 mm using 40 mm steel plate9 mm using 40 mm steel plate12 mm using 120 mm steel plateAluminum Brass IronStainless steele c t i n g d i s t a n c e Y (m m )Aluminum BrassIronStainless steelBrass IronStainless steel2468101214161820010012025201510540801201602002402803203604001.2510.750.50.25One side of target X (mm)One side of target X (mm)One side of target X (mm)D e t e c t i n g d i s t a n c e D e t e c t i n g d i s t a n c e AluminumCopperBrassStainless steelAluminum CopperBrassStainless steelAluminumHints on Correct UseWhen mounting the threaded-type sensor head, do not tighten beyond the torque specified in the following l e d o M eu q r o t g n i n e t h g i T 801-H E .x a m m •N 8011-H E .x a m m •N 01411-H E .x a m m •N 02614-H E .x a m m •N 02224-H E .x a m m •N 01034-H E .x a m m •N 01044-H E .x a m m •N 015 mm min.M3 screwLong-distance Separate-amplifier Proximity SensorsAmplifier unit (ES-X38)Sensor cable end treatmentSensor cable connectionsT o connect the sensorcable, insert the end of the cable through the entry port (1), tighten the screw (2), connect the core wire to the terminal (3), and then tighten the screw (3).• For connections to the EH-422/430/440/290, contact KEYENCE for more information.Use a coaxial cable to connect the sensor head to the amplifier. Limit the length of extension to within 10 m (5 m for models EH-302 and EH-402).Shielded-type sensors can be flush-mounted in a metal base. Sensors of the non-shielded type, however, should be mounted according to the guidelines given below in order to minimize interference from the surrounding metal.).n i m m m (D ).n i m m m (d 02510301540207520010306203Shield8610*Fold back the shielded cable over the sheath.(2)(3)(1)Long-distance Separate-amplifier Proximity SensorsUnit: mmEH-302EH-303A3 coaxial cable300012ø2 coaxial cableø2.8Long-distance Separate-amplifier Proximity SensorsAmplifier15717535.4686.578702 x ø4.5 mounting hole(1.5)ES-32DC3000ø5.4 coaxial cable Teflon® cap(For protection against welding spatter)Unit: mmOP-3108 (for EH-110) OP-3107 (for EH-114)1ø16ø20130002 coaxial cable3000ø3.2 coaxial cable Across-flats: 21, t = 4。

Pepperl+Fuchs SMART传输器电源KFD2-STC4-Ex1.ES说明书

Pepperl+Fuchs SMART传输器电源KFD2-STC4-Ex1.ES说明书

17-08-09 14:38D a t e o f i s s u e 2017-08-10227919_e n g .x m lConnectionAssembly•1-channel isolated barrier •24 V DC supply (Power Rail)•Input for 2-wire SMART transmitters and current sources •Output for 4 mA ... 20 mA or 1 V ... 5 V •Sink or source mode•Line fault detection (LFD)•Up to SIL3 acc.to IEC 61508FunctionThis isolated barrier is used for intrinsic safety applications.The device supplies 2-wire transmitters in the hazardous area, and can also be used with current sources.It transfers the analog input signal to the safe area as an isolated current value.Bi-directional communication is supported forSMART transmitters that use current modulation to transmit data and voltage modulation to receive data.The output is selected as a current source, current sink, or voltage source via DIP switches.A fault is signalized by LEDs acc. to NAMUR NE44 and a separate collective error message output.Test sockets for the connection of HART communicators are integrated into the terminals of the device.ApplicationThe device supports the following SMART protocol:•HART3Features17-08-09 14:38D a t e o f i s s u e 2017-08-10227919_e n g .x mlGeneral specifications Signal typeAnalog inputFunctional safety related parameters Safety Integrity Level (SIL) SIL 3Supply Connection Power Rail or terminals 14+, 15-Rated voltage U r 19 ... 30 V DC Ripple ≤ 10 %Rated current I r≤ 50 mA Power dissipation ≤ 800 mW Power consumption ≤ 1.2 W InputConnection side field sideConnection terminals 1+, 3-; 6+, 5-Input signal 4 ... 20 mA , limited to approx. 27 mA reverse polarity protected Line fault detection downscaling ≤ 3 mA ; upscaling ≥ 22 mA Voltage drop approx. 5 V on terminals 5-, 6+Available voltage ≥ 15 V at 20 mA terminals 1+, 3-OutputConnection side control side Connection terminals 7-, 8+Load 0 ... 300 Ω (source mode)Output signal4 ... 20 mA or 1 ...5 V (on 250 Ω, 0.1 % internal shunt) 4 ... 20 mA (sink mode), operating voltage 16 ... 28 V Ripple 20 mV rms Fault indication output Output typefault bus signal , open collector transistorTransfer characteristics Deviationat 20 °C (68 °F)≤ ± 20 µA incl. calibration, linearity, hysteresis, loads and supply voltage fluctuations (source mode and sink mode 4 ... 20 mA)≤ 10 mV incl. calibration, linearity, hysteresis and fluctuations of supply voltage (source mode 1 ... 5 V)Influence of ambient temperature< 2 µA/K (0 ... 70 °C (32 ... 158 °F)); < 4 µA/K (-20 ... 0 °C (-4 ... 32 °F)) (source mode and sink mode 4 ... 20 mA)< 0.5 mV/K (0 ... 70 °C (32 ... 158 °F)); < 1 mV/K (-20 ... 0 °C (-4 ... 32 °F)) (source mode 1 ... 5 V)Frequency range field side into the control side: bandwidth with 1 mA pp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V pp signal 0 ... 3 kHz (-3 dB)Settling time ≤ 200 ms Rise time/fall time ≤ 20 msGalvanic isolation Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V Input/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V Output/power supply Basic isolation acc. to EN 61010-1 rated insulation voltage ≤ 50 V Indicators/settings Display elements LEDs Control elements DIP-switchConfiguration via DIP switches Labelingspace for labeling at the front Directive conformity Electromagnetic compatibilityDirective 2014/30/EU EN 61326-1:2013 (industrial locations)ConformityElectromagnetic compatibility NE 21:2006Degree of protection IEC 60529:2001Ambient conditions Ambient temperature -20 ... 70 °C (-4 ... 158 °F)Mechanical specifications Degree of protection IP20Connection screw terminalsMass approx. 150 gDimensions 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) , housing type B2Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001Data for application in connection17-08-09 14:38D a t e o f i s s u e 2017-08-10227919_e n g .x mlInputEx ia, Ex iaDSupplyMaximum safe voltage U m 253 V AC (Attention! U m is no rated voltage.)Equipment terminals 1+, 3-Voltage U o 25.2 V Current I o 100 mAPowerP o630 mW Equipment terminals 5-, 6+Voltage U i< 30 V Current I i < 128 mA Voltage U o 7.2 VCurrent I o 100mA PowerP o 25 mWCertificate PF 10 CERT 1750 X Marking¬ II 3G Ex nA II T4Directive conformityDirective 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010International approvals UL approvalControl drawing 116-0368 (cULus)IECEx approval IECEx CES 11.0005General information Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. Forinformation see .17-08-09 14:38D a t e o f i s s u e 2017-08-10227919_e n g .x ml Factory settings: output as current source 4 mA ... 20 mAPower feed module KFD2-EB2The power feed module is used to supply the devices with 24 V DC via the Power Rail. The fuse-protected power feed module can supply up to 150individual devices depending on the power consumption of the devices. Collective error messages received from the Power Rail activate a galvanically-isolated mechanical contact.Power Rail UPR-03The Power Rail UPR-03 is a complete unit consisting of the electrical insert and an aluminium profile rail 35mm x 15mm. To make electrical contact, the devices are simply engaged.Profile Rail K-DUCT with Power RailThe profile rail K-DUCT is an aluminum profile rail with Power Rail insert and two integral cable ducts for system and field cables. Due to this assembly no additional cable guides are necessary.Power Rail and Profile Rail must not be fed via the device terminals of the individual devices!ConfigurationTransfer characteristicAccessories。

STT 3000温度传感器选型指南说明书

STT 3000温度传感器选型指南说明书

STT 3000 Temperature Transmitter Model Selection GuideSeries STT250Instructions● Choose availability column based on mounting configuration.● A dot (●) denotes unrestricted availability. A letter denotes restricted availability.● Blank denotes unavailable - choose alternate mounting. Restrictions follow Table VII. ● Select the desired Key Number based on the desired communications protocol. ● Select options and approvals from Tables.Key NumberI II III IV VI VII VIII STT25_ -_-_ _ _-_ _ _-_ _ _-_ _ _-_ _-_ _-_HOW WILL THE UNIT BE MOUNTED?Module only (no housing), to be DIN rail or wall mountedModule to be "head mounted" directly to the sensor in smaller housingModule to be "field mounted" in Explosion-Proof housing remotely from or directly to the sensor Key NumberSTT25M ●●●STT25H ●●●STT25S ●●●STT25D ●●●STT25T ●●●All modules carry the following approvals:CE Mark for compliance to EN 50081-2 and 50082-2Russian Certificate of Pattern Approval No. 2064 of Jan. 1998Choose additional safety approvals required in Table VII 0●●●0 _ _●FieldE _ _● Mount (2)T _ _●Head Mt C _ _●_ 0 _●_ N _●●_ M _●_ _ 0●●●●h _ _ Si(2)With a Field Mount Housing, 20 characters max. of customer information is available on the nameplate at no charge. (See 13:STT-OE pages for ordering instructions.) (3)For the STT25D and STT25M transmittersSmart Temperature Transmitter Module 4-20mA Output, SFC/SCT Configurable HART 5, Protocol, 4-20mA Output HART 6, Protocol, 4-20mA OutputDigital DE/ 4-20mA Output, for Digital Integration V DescriptionSelection AvailabilityNo Integral Sensor Probe or Thermowell SuppliedTABLE II - Transmitter Housing and Integral Meters (Reference EN0I-6032 for details)HousingNo Housing SuppliedExplosion-Proof Aluminum with Beige Epoxy Coating Explosion-Proof 316 Stainless Steel Type 4X housing - BeigeDual input, HART Protocol, 4-20mA output TABLE I - Sensor, Probe and Thermowell Accessories _ _ M E.U. Meter for Field Mount Housing_ _ E Smart Meter for Field Mount Housing (3)Cable/ Conduit Entry Not Applicable - No Housing Supplied 1/2" NPT Cable/ Conduit Entry M20 x 1.5 Cable/ Conduit EntryIntegral Meter No Integral Meter SuppliedAnalog Meter for Field Mount HousingHOW WILL THE UNIT BE MOUNTED?Availability(4) Full model number does not appear on module or head mount housing.If model number is to appear on unit, order wired on tag.(5)Chosen Operator's Manuals and chosen Certificates are automatically shipped with unit.See 13:STT-OE pages for additional manuals and alternate shipping.HOW WILL THE UNIT BE MOUNTED?AvailabilityModule only (no housing), to be DIN rail or wall mountedModule to be "head mounted" directly to the sensor in smaller housingModule to be "field mounted" in Explosion-Proof housing remotely from or directly to the sensor TABLE VII - Safety Approvals (6)00●●●Class I, Div. 1, Groups A,B,C,D Class II, III Div. 1, Groups E,F,GClass I, II, III, Div. 1,Groups A,B,C,D,E,F,GClass I, Div. 2, Groups A,B,C,DSuitable for Class II, III, Div. 2,Groups F, GEnclosure Rated NEMA 4X Class I, Div. 1, Groups B,C,D Class II, III, Div. 1 Groups E,F,GClass I, II, III, Div. 1,Groups A,B,C,D,E,F,GClass I, Div. 2, Groups A,B,C,DSuitable for Class II, III, Div. 2,Groups F, GEnclosure Rated NEMA 4XClass I, II, III, Div. 1,Groups A,B,C,D,E,F,GClass I, Div. 2, Groups A,B,C,DSuitable for Class II, III, Div. 2,Groups F, GOutdoor Location Enclosure Rated NEMA 4X Class I, Div. 1, Groups A,B,C,DClass I, Div. 2, Groups A,B,C,D Class I, Div. 1, Groups B,C,D Class II, III, Div. 1, Groups E,F,GClass I, II, III, Div. 1,Groups A,B,C,D,E,F,GClass I, Div. 2, Groups A,B,C,DSuitable for Class II, III, Div. 2,Groups F, GEnclosure Rated Type 4XClass I, II, III, Div. 1,Groups A,B,C,D,E,F,GClass I, Div. 2, Groups A,B,C,DSuitable for Class II, III, Div. 2,Groups F, GEnclosure Rated Type 4X Class I, Div. 1, Groups A,B,C,DClass I, Div. 2, Groups A,B,C,Dcontinued next pageNone No approval body certifications included Factory Mutual Explosion-Proof 1CfApprovalBody Approval Type Location or Classification SelectionDust Ignition-Proof Intrinsically SafeNon-Incendive Outdoor Location Explosion-Proof 1J●Dust Ignition-Proof Intrinsically SafeNon-Incendive Outdoor Location Non-Incendive Intrinsically Safe1G●Non-Incendive CSAExplosion-Proof 2J●Intrinsically Safe 1G●●Dust Ignition-Proof Intrinsically SafeNon-Incendive Outdoor Location Intrinsically Safe2G●Non-Incendive Outdoor Location Intrinsically Safe 2G●●Non-IncendiveTABLE VII - Safety Approvals (6) Continued Ex ia IICT6 (Ta = -50ºC to +40ºC)T5 (Ta = -50ºC to +55ºC)T4 (Ta = -50ºC to +85ºC)(Module)Ex d IICT6 (Ta = -50ºC to +80ºC)T5 (Ta = -50ºC to +85ºC)Ex tD A21 T80ºC (Ta = 80ºC)T95ºC (Ta = 85ºC)Enclosure rated IP 66/67Ex ia IICT6 (Ta = -50ºC to +40ºC)T5 (Ta = -50ºC to +55ºC)T4 (Ta = -50ºC to +85ºC)Ex d IICT6 (Ta = -50ºC to +80ºC)T5 (Ta = -50ºC to +85ºC)Ex tD A21 T80ºC (Ta = 80ºC)T95ºC (Ta = 85ºC)Ex nA, IICT6 (Ta = -50ºC to +85ºC)(Honeywell)Enclosure Rated IP 66/67SAExEx ia IICS/08-371XT6 (Ta = -50ºC to +40ºC)T5 (Ta = -50ºC to +55ºC)T4 (Ta = -50ºC to +85ºC)SAExEx d IICS/08-372XT6 (Ta = -50ºC to +80ºC)T5 (Ta = -50ºC to +85ºC)Ex tD A21 T80ºC (Ta = 80ºC)T95ºC (Ta = 85ºC)Enclosure rated IP 66/67SAExEx ia IICS/08-371XT6 (Ta = -50ºC to +40ºC)T5 (Ta = -50ºC to +55ºC)T4 (Ta = -50ºC to +85ºC)SAEx Ex d IICS/08-372XT6 (Ta = -50ºC to +80ºC)T5 (Ta = -50ºC to +85ºC)Ex tD A21 T80ºC (Ta = 80ºC)T95ºC (Ta = 85ºC)Enclosure rated IP 66/67●●●●●●Enclosure rated IP 66/67●●●(6) The module itself is rated intrinsically safe, IP20. An appropriately rated enclosure is required for Outdoor and Dust locations. * Module must be installed in IP54 or better housig for Zone 2 approval validity.** The user must determine the type of protection required for installation of the equipment. The user shall then check the box ( ) adjacent to the type of protection used on the equipment certification label. Once a type of protection has been checked on the label, the equipment shall not be reinstalled using any of the other certification type.ATEX*Intrinsically Safe Zone0/13S ●●●Flameproof, Zone 1ApprovalBodyApproval Type Location or ClassificationSelection●Multiple Marking** Int. Safe, Zone 0/1, or Flameproof, Zone 1, or Non-Sparking,Zone 23H p3D pNon-SparkingZone 2Ex nA, IIC T6*3N ●●Flameproof, Zone 1ZD ●●●SAEx (South Africa)Intrinsically Safe Zone 0/1Z2●●●Intrinsically Safe Zone0/1and Flameproof, Zone 1ZA ●●●IECExFlameproof, Zone 1(with IS transmitter)Ex d IIC; T6 (Ta = –50 to +80ºC)T5 (Ta = –50 to +85ºC)Ex tD A21 IP6X T80ºC (Ta = –50 to +80ºC Ex tD A21 IP6X T95ºC (Ta = –50 to +85ºC CB Intrinsically SafeZone 0/1Ex ia IIC; T6 (Ta = –50 to +40ºC)T5 (Ta = –50 to +55ºC)T4 (Ta = –50 to +85ºC)CS Intrinsically Safe, Zone0/1BR Ex ia IIC T6, T5, T46SINMETRO (Brazil)Flameproof, Zone 1BR Ex d IIC T6, T5, T46D pNotes:(6) The module itself is rated intrinsically safe, IP20. An appropriately rated enclosure is required for Outdoor and Dust locations.See 13:STT-9 or Operator's Manual EN1I-6190 for part numbers.See 13:STT-OE pages for Order Entry Information including tagging, transmitter configuration,manuals, certificates, drawings and SPINS.To request a quotation for a non-published "special", fax RFQ to Marketing Applications at (1) 602 313-6155.Ordering Example: STT25M-0-000-000-000-000-00-1C。

德语基础语法

德语基础语法

练习
Ich kann jetzt Deutsch sprechen .
______ ich hier rauchen? Darf Wir _________ uns beeilen,sonst kommen wir müssen ssen spä zu spät. sollst Du ________ die Hausaufgaben fertig machen. möchte chte Hongliang Wang ________ dringend eine Wohnung mieten.
ein/mein Kind eines/meines eines/meines es/mein Kindes Kindes einem/meinem einem/meinem em/mein Kind ein/mein Kind meine meine Kinder meiner meiner Kinder meinen Kindern meinen Kindern meine meine Kinder
einem/meinem em/mein einer/meiner er/mein D einem/meinem Freund einer/meiner Tante A Pl. einen/meinen en/mein einen/meinen Freund eine/meine eine/meine Tante meine meine Tanten meiner meiner Tanten meinen meinen Tanten meine meine Tanten
a.在某人处 a.在某人处 b.在 b.在……时 时 表示地点) gegenüber a.(表示地点 gegen ber a.(表示地点) 对面, 在……对面,面 对面 对 b.(表示对象 表示对象) b.(表示对象) 对……

康佳高压包的型号与机型的对照表

康佳高压包的型号与机型的对照表

康佳高压包的型号与机型的对照表-1序号物料编号行包型号适用机型2 30000008 BSC28-1804 T2983X. T3472B 7 30000045 JF0501-1205,BSC24-0807 T211510 30000079 BSC27-1433 T251011 30000093 BSC25-2653S T25H12 30000111 BSC69A T2988P13 30000215 BSC30-2684 T389814 30000216 BSC28-0619 T29L15 30000225 BSC25-.111 T21D机16 30000270 BSC32-080317 30000352 BSC30-0806 T2993N18 30000377 BSC28-0615 T25/T29D19 30000381 JF0101-0172 T2991H20 30000403 BSC71A T3488P22 30000434 BSC30-0838 P2987N24 30000465 BSC25-2683/0832 T349825 30000473 BSC30-0817 P3492N26 30000482 BSC25-0116 F2109C27 30000532 BSC30-0809 T3888ID\3498ID28 30000542 BSC25-0821 A2991(双焦)29 30000543 T291230 30000572 BSC28-0621 T2566E31 3000622 P3489N32 30000642 BSC32-0823 A299133 30000643 BSC28-0623 T2581C34 30000652 BSC25-0814 P2989N(代0838)35 30000782 BSC30-0828 T2980C36 30000843 P2992C双焦37 30000844 BSC28-0630 T2966C38 30000852 BSC28-0634 T3466C39 30000962 SC28-0633 T2581C40 30001062 JF0501-19133 T21”E型机41 30001092 BSC25-2056/1812 T2168K42 30001163 BSC28-0622 F296543 30001204 BSC28-0708 T25/T29/T34K44 30001252 BSC30-0839 K机双焦45 30001282 BSC28-0629 T3466E46 30001283 T2581C47 30001342 BSC25-0137 P2162K48 30001352 BSC25-0129 T21K机49 30001362 BSC28-0844 T25/T29S机双焦50 30001392 BSC28-0648 S机单焦51 30001442 BSC22-2630S P3460T52 30001443 BSC22-2658S P291653 30001452 JF0501-0147/JF0501-19519 T21S,SA机54 30001464 BSC22-2673S BT4310L55 30001482 BSC25-0146 P21SK,SE机56 30001503 BSC22-2696S P3460K57 30001542 BSC30-0913 P3409T58 30001572 BSC30-0906 I机用59 30001592 BSC25-0100/JF0501-19543 T21”A机60 30001612 BSC23-2665S P2902T61 30001632 BSC23-2671S T机62 30001692 BSC30-0923 P3460I63 30001702 BSC30-0919 P2958I64 30001712 BSC28-0643 T25”29”SE、SK机65 30001742 BSC28-0653 T34SK06866 30001752 BSC30-0907 P29FM18667 30001782 BSC30-0853 FG、MV、ST机同用(单焦)68 30001832 BSC30-0854 FG、MV、ST机同用(双焦)69 30001852 BSC30-0855 34”FG、MV、ST(双焦)70 30001862 BSC30-0858 34”FM机用KONKA彩电高压包机型对照表KONKA, 彩电, 对照表, 高压包, 机型编号型号应用 (代表) 机型30000214 BSC30-063/A T349830000215 BSC25-2684S T389830000300 BSC25-067/A P2156E30000532 BSC25-2620S T3498ID P2999ID T2999 30000542 BSC31-064/A A2986 P2916 A2991 A2910 配三星管30000543 BSC25-2618S T2999 A2981 T2912 T2912BC30000642 BSC30-0823 DT298 A2986 A2991 P2916 A2910 配东芝管30000762 BSC30-0827 P3492ID30000782 BSC30-0828 P2982C P2986C P2990C P2992C P2990N 30000783 SC30-0830 P3486C30000792 BSC30-0829 P2982C P2986C P2990N P2990C P2992C30000843 BSC29-067/A P2982C P2986C P2990C P2992C P2990N 30000852 BSC28-0634 T3472C T3466C T3477C30000862 BSC28-0830 P3492C 配东芝管30001012 BSC25-0126 P2190E1 P2190E P2156E 配彩虹、赛格、三星管30001092 BSC25-0125 T2176K T2168K 配彩虹管30001172 BSC30-0914 P2929 P2990E 配LG管30001212 BSC30-079/A P2901 配彩虹、东芝管30001222 BSC29-076/A P2562K P2960K P2961K P2962K P2962K1(单聚焦) BSC29-076/A T2968K T2975K T2976K 配LG管、彩虹管30001242 BSC29-077/A T3468K30001282 BSC21-2068S T3466E 配金星、赛格管30001283 BSC280609 P3460K 配东芝管30001252 BSC21-2074S P2960K P2961K P2962K P2962K1(双聚焦) 配三星管、华飞管、永新管、LG管30001342 BSC25-N2702 P2162K P2179K 配三星、华飞管30001322 BSC-30-0816 T3412ID 汤姆逊管30001332 BSC-30-083/A P2901 配北松管30001352 BSC-25-0129 T2168K T2176K 配福地管30001352 BSC-25-0129 P2162K P2179K 配北松管30001362 BSC26-N2306 P2960S P2961S P2971S P2972S P2967S (双聚焦)配华飞、永新、LG管30001392 BSC28-070/A P2960S P2961S T2975S T2976S T2973S30001392 BSC28-070/A P2971S P2972S 配彩虹管、北松管、汤姆逊管30001392 BSC28-070/A P2572S P2571S 配彩虹管30001492 BSC22-025/A P3460K 配北松管30001482 BSC JF0501-004 P2171S P2172S 配三星、华飞、北松管30001482 BSC JF0501-004 T2173S T2176S 配北松、华飞管30001452 BSC JF0501-002 T2173S T2176S 配三星,彩虹,金星,永新,赛格,福地管30001503 BSC22-026/A P3460K 配三星、北松管30001392 BSC28-070/A P2967S P2571S T3476S 配北松、彩虹管30001442 BSC22-022/A P3460T P3409T P34FT189 配北松管(细)、华飞管30001542 BSC23-023/A P3460T P3409T P34FT189 配三星管30001562 BSC22-027/A P2902M LG-PHILIPS管30001662 BSC23-028/A P3460T P3409T 配东芝管30001202 BSC30-078/A P2902T P2906T 配北松管30001612 BSC23-025/A P2902T P2906T 配彩虹管30001642 BSC23-027/A P2902M P2905M 配LG管30001572 BSC30-086/A P2958I P2902I P2916I 配永新管、LG管30001702 BSC30-088/A P2958I P2902I P2916I 配北松管30001632 BSC23-026/A P2903T P2908T P29FT188 配永新、LG管30001722 BSC30-089/A P2903T P2908T 配LG-PHILIPS管、彩虹30001493 BSC26-053/A P2572S P2571S 配LG管、三星管30001464 BSC22-024/A BT5080 BT4310 BT5080H BT4310L BT4320H 30001602 BSC25-086/A P2156E(配北松管) T2176E T2169E30000003 T2877X、T2979X、T2983N、T2989N、T2977B、30000006 T2977X、T2979X、T2983X、T2989N、T2989X、T2979X、T2983N、T2989M、T2989N1、T2987B30000008 T2983X、T2989M、T2989X、T2987B30000009 F2968D、F2968D/G、F2977D、F2979D、F2980D、F2977D1、F2977D2/G、F2979D2/G、F2977D/G、F2979D/G、F2980D/G、T2979D1、F2982D2/G、T2986D1、F2977D2、F2979D2、F2982D2、T2982D1、T2530D、VT29830000010 T2983X、T2983L、T2985L30000013 T3488N、T3488P30000014 T3472B、T3472B1、T3477B、T3482B、T3487B、T3487B1、T3487N、T3477N、T3477N230000015 T3477B1300000016 T3877N、T3877N230000017 T2888ND、T3888NI30000018 T211030000036 T953FSⅡ30000037 T953FSⅡ30000045 T211130000046 T1437D2、T3731D1、T3733D1、T3731D、F1437D5、K1437C、T1437D2/G、F1437D5/G、T3732D、T3735D、T3736D、T3731E130000048 T151730000050 T3731E130000053 T172630000054 T3731E130000056 T2528H、T2583H、T2583H1、T2587H、T2587L、T2588N、T2588N2、T2588X2、T25康佳高压包的型号与机型的对照表-288X6、T2588X30000057 T953S30000059 T210630000060 T210630000061 T212030000065 T5471K、T5466K30000072 T212830000073 T2108E、T2128A30000076 T5401A30000079 T2510、T2512A30000080 T251030000081 T251630000082 T251030000087 T258830000088 T2528H、T2583H、T2583H1、T2587H、T2587L、T2588N、T2588N2、T2588X2、T2588X6、T2588X30000090 T2588N、T2588N230000091 T2587H、T2588N、T2588N2、T2588X2、T2588X6、30000093 T2583H、T2583H1、T2587L、T2588X、T2588X2、T2588X6、T251830000094 T250630000110 T2977B30000111 T2988P、T2998NI、T2998N、T2998ND30000121 ST2989、T2985H、T2988L、T2989N2、T2991H1、T2983H、T2985L、T2989H、T2990L、T2991L、T2983L、T2988H、T2989L、T2991H、T2991L1、30000201 T2989L、T2989H、T2991L、T2991H、T2991H1、T2992N30000204 K1418LF、K14718NF、T3731E130000205 F2132D4、F2132D4/G、F2133D4、F2135D、F2135D4、F2135D4/G、F2137D3、F2137D3/G、F2137D5、F2139D、F2139D/G、F2139D2、F2139D3、F2139D3/G、F2139D4、F2139D4/G、F2139D5、F2139D5/G、F953D、F953D4、F953D4/G、F953DA、F953DA/G、F953DB、F953DB/G、T2136N、T2169B、T5471N30000207 F2977D、F2979D、F2980D、F2977D1、F2977D2/G、F2979D2/G、F2977D/G、F2979D/G、F2980D/G、T2979D1、F2982D2/G、T2986D1、F2977D2、F2979D2、F2982D2、T2982D1、T2530D30000208 T2587D、T2587D1、T2530D30000211 显示器15寸ZXI-0330000213 K2979H3、T2991G30000214 T349830000215 T389830000216 T2966L、T2983L、T2980H、T2985H、T2985L、T2989L、T2990L、F2980L30000221 T2983X30000224 F2131D/G、F2135D4、F2139D5、F2131D、F953DB/G、T5429D1、F2131D4、F2135D4/G、F2139D5/G、T2132D、F953DB、T5471N、F2131D4/G、F2137D2、F5428D、T2133D、F953D4/G、T953D、F2132D、F2137D5、F5428D/G、T2135D、F953D/G、T5429D、F2132D/G、F2137D5/G、F5428D4、T2136D、F2131D、T5428D、F2132D4、F2139D、F5428D4/G、T2136N、F953D4、T5428D1、F2132D4/G、F2139D/G、F5429D、T2137D、F953D、F5429D4/G、F2133D4、F2139D2、F5429D/G、T2137D2、F2135D/G、F2135D、F2139D4、T2139D4/G、F5429D4、T2139D30000226 F2519D1、F2518D、F2520D3、F2530D/G、F2581D2、F2519D1、F2519D3、F2518D2、F2528D/G、F2530D2、F2581D2/G、F2520D、F2519D、F2528D2/G、F2531D/G、F2582D、T2530D1、F2520D/G、F2519D/G、F2528D2/G、F2531D2、F2587D1/G、T2519D1、T2519D2、T2531D、T2580D、T2586D、T2587D1、T2587D2、T2589D、T2587D30000225 F2132D4、F2132D4/G、F2133D4、F2135D、F2135D4、F2135D4/G、F2137D3、F2137D3/G、F2137D5、F2139D、F2139D/G、F2139D2、F2139D3、F2139D3/G、F2139D4、F2139D4/G、F2139D5、F2139D5/G、F953D、F953D4、F953D4/G、F953DA、F953DA/G、F953DB、F953DB/G、T2136N、T2169B、T5471N30000228 T2991H、T2990L、T2991H1、T2992NF2520D3、F2530D/G、F2581D2、F2519D1、F2519D3、F2518D2、F2528D/G、F2530D2、F2581D2/G、F2520D、F2519D、F2528D2/G、F2531D/G、F2582D、T2530D1、F2520D/G、F2519D/G、F2528D2/G、F2531D2、F2587D1/G、T2519D1、T2519D2、T2531D、T2580D、T2586D、T2587D1、T2587D2、T2589D、T2587D30000231 T2979X、T2979X1、T2989NI、TT2977X、T2989X30000250 T2977X、T2979X康佳高压包的型号与机型的对照表-330000260 T2983X、T2989M、T2989X、T2987B30000261 T2982D130000270 T3289W30000271 T3289W130000280 F1437D5/G、F1437D5、T1437D2、T3731D、T1437D2/G、T3731D1、T3732D、T3733D、T3733D1、T3735D、T3736D30000290 T953P330000300 DT218E、DT218ES、P2156E、P2190E、P2190E1、P2190N、A2186E、A2186N、DT216E、DT216ES、F2109E、F2109E/G、F2109E2、F2109E2/G、F2133A1、F2135A1、F2136A1、F2139J1/G、T2109N、T2139N、T2166E、T2166E1、T2166N、T2169N、T2188E、T5471NW30000310 F2518D、F2518D2、F2519D、F2519D/G、F2519D1、F2519D3、F2520D、F2520D/G、F2520D3、F2528D/G、F2528D2/G、F2530D/G、F2530D2、F2531D/G、F2531D2、F2587D1/G、F2968D、F2968D/G、F2980H、F2980L30000320 F2519D1、F2518D、F2520D3、F2530D/G、F2581D2、F2519D1、F2519D3、F2518D2、F2528D/G、F2530D2、F2581D2/G、F2520D、F2519D、F2528D2/G、F2531D/G、F2582D、T2530D1、F2520D/G、F2519D/G、F2528D2/G、F2531D2、F2587D1/G、T2519D1、T2519D2、T2531D、T2580D、T2586D、T2587D1、T2587D2、T2589D、T2587D30000330 T3472D、T3472N、K3477LF30000352 P2992N、T2993N、P2993NT2991D、T2989D、T2991D1、F2980H30000379 T2998N30000381 ST2989、T2986H、T2989L、T2990L、T2988H、T2985H、T2991H、T2966H、T2991H130000382 T2988NT、T2990NT30000383 T2977X、T2979X1、T2979X、T2989X、T2992N30000384 T2983X、T2983L、T2985L30000388 P2993N30000393 P2992N、T2993N、P2993N30000395 P2982N、P2987N、P2989N30000412 P2993N30000413 T3289W30000433 T3472B、T3472B1、T3477B、T3482B、T3487B、T3487B1、T3477N30000434 P2987N30000435 T3289W30000436 P2992N、T2993N、P2993N30000437 T3888N2、T3888ND30000452 T2131F,T2136G30000463 T1437D2、T1437D2/G30000464 K2588A2、K2588A2(SKD)、K2588C、K2588D、K2588G、K2588T、K2588TA、K2588TS30000473 P3492N30000482 F2109C、T2166C1、T2166CT2912BC、T2999、P2999ID、T3498ID30000542 A2910、A2911、A2986、A2991、DT298、PD292、P2992ID、P2999ID、P2916、P2986、30000543 ITV2912、T2912、T2912BC、A2981、T299930000552 A1488E/G、A1486E/G、T1437A30000572 F2587E、F2587E/G、T2525N、T2566B、T2566E、T2566E1、T2566E2、T2566E3、T2566E5、T2566E6、T2569E、T2569N、T2580E、T2588E30000592 T2131F、T2132F、T2133F、T2135F、T2136F、T2136G30000602 P2592E、P2592N、P2591N、P2590E、T2988E、TS2989、T2989E30000612 DT138M、DT138MW、DT138U、DT138UW、DTO138U30000622 P3489N 与30-0814一样用30000632康佳高压包的型号与机型的对照表-4HR3093U、HD3098U 30000782 A2971C 、DT298CS、P2982C、P2986C、P2990C、P2990N、P2992C、P2992C130000642 A2910、A2911、A2991、P291630000712 A2981C、K2966S、T2909C、T2965C、T2966C、T2969C、T2988C、T2989C、T2990C、T2990NT、T2991C、T2992C30000722 F2518A、F2528A、F2530A、F2531A、T2531A、T2566A、T2566R、T2590R、F2968A、F2980A、F2982A、F2982A330000732 T2589C、F2580C30000742 A1486E、A1486E1、A1486N、A1488E、A1488N、A1488E130000762 DT348、P3492ID30000772 HD3098U30000783 P3492C、P3486C30000792 DT298CS、P2982C、P2990N、30000843 DT298CS、P2982C、P2990C、P2990N、P2992C、P2992C1 30001127A2176E、T2168E30001132 DT-21K530001152 P2556E、P2590E、P2591N、P2592E、P2592N、T2922E、T2969E、T2969N、T2980E、T2988E、T2989E30001163 P2551A、F2509A、F2565、T2526A、T2563A、T2566A2、T2569A、T2588A、F2909A、F2909A1、F2965、T2966A2、T2988A、P2951A、F2968A1、F2979A1、F2980A1、F2982A1、T2927A30001172 P2929、P2951A、P2956E、P2990E30001202 P2901T、P2902T30001203 F2587E、F2587E/G、T2525N、T2566B、T2566E、T2566E1、T2566E2、T2566E3、T2566E5、T2566E6、T2569E、T2569N、T258030000844 T2909C、T2965C、T2969C30000852 T3468C、T3472C、T3477C、T3466C、K3472EY30000862 P3486C、P3492C30000902 P2190N30000924 DT208U30000932 T2569E、T2566E、T2566E2、T2566E3、T2566E6、T2588E、T2566E530000942 FL3299U30000952 F2509C、、F2509C1、F2566C、F2566C3、F2580C、F2581C、F2581C1、F2586C、F2589C、30000962 F2509C1、T2566C、T2566C330000972 T2166R、K2169TQ、K2169TQ1、K2169TQ2、K2169TQ3 30000643F2509C、F2580C、F2581C、F2581C1、F2586C、F2589C、ST2580、SY2580C30000652 P2987N、P2989N30000683 F2979A30000684 T2909C1、T2966C1、T2983C、T2985C30000692 DT148、DT148E、DT148ES、KDT14830001012 P2165E、P2172E、P2190E、P2190E130001042 T2168N、A2176K、A2176N、T2180K30001043 P3211、PR299230001062 F953A、K2180D930001082 T2168E、A2176E30001092 T2166R、T2168K、K2106TQ30001112 T1476A、T1473A、A14SE08630001122 F2509A、F2565、T2522E、T2525、T2526A、T2563A、T2563E、T2566A2、T2566E2、T2566E3、T2566E5、T2566E6、T2569A、T2569E、T2580E、T2588A康佳高压包的型号与机型的对照表-530001362 P2960R、P2961S、P2962R、P2962S、P2967S、P2971S、P2972S、P2977S、P29SE072、P29SE077、P29SE151、P29SE186、P29SE281、P29SE282、P29TE282、P29TE661、P3460S30001392 P2571S、P2571SN、T2920S、T2922S、T2926、T2968R、T2973S、T2975R、T2975S、T2975SN、T2976S、T2978S、T29SE073、P2960R、P2961S、P2962R、P2962S、P2967S、P2971S、P2972S、P2977S、P29FS061、T3476S、T34SK076、T3473S30001412 A1386UM、A14SE086、DT14SK008、DT0138UY、T14SA073、T14SA076、T14SA12830001432 P321130001442 P3409T、P3460T、P34FT18930001443 P291630001452 SP21SK566、P21AM390、P21SA281、P21SA282、P21SA376、P21SA383、P21SA387、P21SA390、P21SE071、P21SE151、P21SE282、P21TE569、P21TE661、T2126PPD、T2173S、T2176S、T21SA026、T21SA073、T21SA120、T21SA236、T21SA267、T21SA326、T21SE358、T21SK022、T21SK026、T21SK026T、T21SK068、T21SK076、T21SK078、T21SK120、T21SK236、T21SK267、T21TE358、T21TE569、T21TE66130001632P2903T、P2908T、P29FT18830001642 P2902M30001252 P2928、P2960K、P2961K、P2962K、P2962K1、P2962V、P2979K、P2998K30001282 T3466E30001342 P2162K、P2179K30001352 P2162K、P2179K、T2168K30001482SP21SK391、SP21SK520、SP21SK529、SP21SK529V、DT15SK203P、P15SK107、K20SA201U、A21SE090、DT21SK003P、P2171S、P2172S、P21AM390、P21SA281、P21SA282、P21SA376、P21SA383、P21SA390、P21SE071、P21SE072、P21SE151、P21SE282、P21SK056、P21SK056V、P21SK177、P21SK383V、P21TE569、P21TE661、SP21TK520、DT21SK008、T2176S、T21SA073、T21SA120、T21SA236、T21SA267、T21SA326、T21SE358、T21SK022、T21SK026、T21SK026T、T21SK06830001653 P29SK06130001662 P3409T、P3460T、P34FT18930001702 P2902I、P2916I、P2958I30001712 P25SE071、P25SE072、P25SE151、P25SE281、P25SE282、P25SK062、P25SK071、P25SK151、P25SK151V、P25SK151VOD、P25SK282V、P25SK376、P25SK383、P25SK387、P25SK569、P25SK569V、P25TE282、P25TE661、T25SK026、T25SK068、T25SK068V、T25SK076、T25SK120、T25SK569、T25SE073、T25SE120、T25SE267、T25SE358、T25TE267、。

ESP32-S2-Solo-2 模组技术规格书说明书

ESP32-S2-Solo-2 模组技术规格书说明书

P RE LI MI N A R YESP32­S2­SOLO­2ESP32­S2­SOLO­2U技术规格书2.4GHz Wi­Fi (802.11b/g/n)模组内置ESP32­S2系列芯片(版本v1.0),Xtensa ®单核32位LX7微处理器flash 最大可选16MB ,内置芯片可叠封2MB PSRAM 36个GPIO ,丰富的外设板载PCB 天线或外部天线连接器ESP32­S2­SOLO­2ESP32­S2­SOLO­2U预发布v0.5乐鑫信息科技版权©2022P RE LI MI N A R1模组概述1.1特性CPU 和片上存储器•内置ESP32-S2或ESP32-S2R2芯片,Xtensa ®单核32位LX7微处理器,支持高达240MHz 的时钟频率•128KB ROM •320KB SRAM •16KB RTC SRAM•2MB PSRAM (仅ESP32-S2R2芯片)Wi­Fi•802.11b/g/n•802.11n 模式下数据速率高达150Mbps •帧聚合(TX/RX A-MPDU,RX A-MSDU)•0.4µs 保护间隔•工作信道中心频率范围:2412~2484MHz 外设•GPIO 、SPI 、UART 、I2C 、I2S 、LCD 接口、Camera 接口、IR 、脉冲计数器、LED PWM 、TWAI ®(兼容ISO 11898-1,即CAN 规范2.0)、全速USB OTG 、ADC 、DAC 、触摸传感器、温度传感器、通用定时器、看门狗定时器模组集成元件•40MHz 集成晶振•最大16MB Quad SPI flash天线选型•板载PCB 天线(ESP32-S2-SOLO-2)•通过连接器连接外部天线(ESP32-S2-SOLO-2U)工作条件•工作电压/供电电压:3.0~3.6V •工作环境温度:–85°C 版模组:–40~85°C–105°C 版模组:–40~105°C (仅ESP32-S2-SOLO-2-H4和ESP32-S2-SOLO-2U-H4)1.2描述ESP32-S2-SOLO-2和ESP32-S2-SOLO-2U 是通用型Wi-Fi MCU 模组,功能强大,具有丰富的外设接口,可用于可穿戴电子设备、智能家居等场景。

Oracle Sun Storage 系列产品的基准固件版本说明书

Oracle Sun Storage 系列产品的基准固件版本说明书

This document provides RAID and open systems array baseline firmware versions delivered with Oracle’s Sun Storage Common Array Manager 6.8.1.■Sun Storage 2500-M2Arrays and StorageTek 2500Series Arrays ■Sun Storage 6000Series,StorageTek 6000Series,and FlexLine Arrays ■Sun Storage J4000Series Arrays,Sun Storage F5100Flash Array,and Sun Blade 6000Disk Module Sun Storage 2500-M2Arrays and StorageTek 2500Series Arrays 1Note –For the StorageTek 2500Series,upgrading from an 06.xx.xx.xx controller version to 07.xx.xx.xx requires the use of an upgrade utility.Consult the Sun StorageTek 2500Series Array Firmware Upgrade Guide .If you attempt an upgrade that fails,you should contact a support representative.See ”Technical Support”.1.Sun Storage 2500-M2 Arrays is a different array series from StorageTek 2500 Series Arrays.Controller Version Firmware File251006.70.54.11nge/RC_06705411_desperado_apollo_1532.dlp 2510_exmoor07.35.67.10nge/RC_07356710_exmoor_apollo_1532.dlp 253006.70.54.11nge/RC_06705411_desperado_apollo_133x.dlp 2530_exmoor07.35.67.10nge/RC_07356710_exmoor_apollo_133x.dlp 2530-M207.77.13.11nge/RC_07771311_e10_777_26x0_apollo.dlp 254006.70.54.11nge/RC_06705411_desperado_apollo_1932.dlp 2540_exmoor07.35.67.10nge/RC_07356710_exmoor_apollo_1932.dlp 2540-M207.77.13.11nge/RC_07771311_e10_777_26x0_apollo.dlp NVSRAM Version Firmware File2510N1532-670843-001nge/N1532-670843-001.dlpSun Storage Common Array ManagerArray Baseline Firmware Reference, Version 6.8.12510_exmoor N1532-735843-002nge/N1532-735843-002.dlp2510-Simplex N1532-670843-901nge/N1532-670843-901.dlp2510_exmoor-Simplex N1532-735843-902nge/N1532-735843-902.dlp2530N133X-670843-001nge/N133X-670843-001.dlp2530_exmoor N133X-735843-002nge/N133X-735843-002.dlp2530-M2N2530-777843-006nge/N2530-777843-006.dlp2530-Simplex N133X-670843-901nge/N133X-670843-901.dlp2530_exmoor-Simplex N133X-735843-902nge/N133x-735843-902.dlp2540N1932-670843-001nge/N1932-670843-001.dlp2540_exmoor N1932-735843-002nge/N1932-735843-002.dlp2540-M2N2540-777843-006nge/N2540-777843-006.dlp2540-Simplex N1932-670843-901nge/N1932-670843-901.dlp2540_exmoor-Simplex N1932-735843-902nge/N1932-735843-902.dlpIOM Version Firmware File2500SAS0196nge/esm0196.esm2501-M20343nge/esm0343.esmDisk Drive Version Firmware FileH7220AA30SUN2.0T A28A disk/D_H7220AA30SUN2.0T_A28A_LCA.dlp HDS7250SASUN500G AV0A disk/D_HDS7250SASUN500G_AV0A_LCA.dlp HUA7210SASUN1.0T AC5A disk/D_HUA7210SASUN1.0T_AC5A_LCA.dlp HUA7250SBSUN500G AC5A disk/D_HUA7250SBSUN500G_AC5A_LCA.dlp HUA7275SASUN750G AC5A disk/D_HUA7275SASUN750G_AC5A_LCA.dlp HUS1514SBSUN146G SA04disk/D_HUS1514SBSUN146G_SA04_LCA.dlp HUS1530SBSUN300G SA04disk/D_HUS1530SBSUN300G_SA04_LCA.dlp HUS1530SCSUN300G A5C6disk/D_HUS1530SCSUN300G_A5C6.dlpHUS1560SCSUN600G A5C6disk/D_HUS1560SCSUN600G_A5C6.dlpHUS1573SBSUN72G SA04disk/D_HUS1573SBSUN72G_SA04_LCA.dlp ST31000NSSUN1.0T SU0F disk/D_ST31000NSSUN1.0T_SU0F_LCA.dlp ST31001NSSUN1.0T SM04disk/D_ST31001NSSUN1.0T_SM04_LCA.dlp ST314655SSUN146G0D92disk/D_ST314655SSUN146G_0D92.dlpST314656SSUN146G0B1C disk/D_ST314656SSUN146G_0B1C.dlpST32000NSSUN2.0T SM04disk/D_ST32000NSSUN2.0T_SM04_LCA.dlpST330055SSUN300G0D92disk/D_ST330055SSUN300G_0D92.dlpST330056SSUN300G0B1C disk/D_ST330056SSUN300G_0B1C.dlpST330057SSUN300G0805disk/D_ST330057SSUN300G_0805.dlpST340008SSUN0.4T0643disk/D_ST340008SSUN0.4T_0643.dlpST345056SSUN450G0B1C disk/D_ST345056SSUN450G_0B1C.dlpST35000NSSUN500G3AZY disk/D_ST35000NSSUN500G_3AZY_LCA.dlpST360057SSUN600G0805disk/D_ST360057SSUN600G_0805.dlpST373455SSUN72G0D92disk/D_ST373455SSUN72G_0D92.dlpST37500NSSUN750G3AZY disk/D_ST37500NSSUN750G_3AZY_LCA.dlpSun Storage6000Series,StorageTek6000Series,and FlexLine Arrays Note–For the6140,6540and FLX380array types,upgrading from a06.xx.xx.xx version to07.xx.xx.xx requires a special utility.Consult the Sun Storage6000Series Array Firmware Upgrade Guide.If you attempt an upgrade that fails,you should contact a support representative.See”Technical Support”.Controller Version Firmware File613006.60.22.10nge/RC_06602210_chromium2_apollo_288x.dlp614006.60.22.10nge/RC_06602210_chromium2_apollo_399x.dlp6140_allegheny07.60.56.10nge/RC_07605610_09q2_apollo_fc_399x.dlp618007.77.13.11nge/RC_07771311_e10_777_49xx_apollo.dlp654006.60.22.10nge/RC_06602210_chromium2_apollo_6091.dlp6540_allegheny07.60.56.10nge/RC_07605610_09q2_apollo_fc_6091.dlp658007.77.13.11nge/RC_07771311_e10_777_7091_apollo.dlp678007.77.13.11nge/RC_07771311_e10_777_7091_apollo.dlpFLX24006.60.22.20nge/RC_06602220_chromium2_silverado_288x.dlpFLX28006.60.22.20nge/RC_06602220_chromium2_silverado_588x_06600400.dlpFLX38006.60.22.20nge/RC_06602220_chromium2_silverado_6091.dlpFLX380_allegheny07.60.56.10nge/RC_07605610_09q2_apollo_fc_6091.dlpNVSRAM Version Firmware File6130N288X-660843-003nge/N288X-660843-003.dlp6140N399X-660843-003nge/N399X-660843-003.dlp6140_allegheny N399X-760843-005nge/N399X-760843-005.dlp6180N49XX-777843-001nge/N49XX-777843-001.dlp6540N6091-660843-003nge/N6091-660843-003.dlp6540_allegheny N6091-760843-004nge/N6091-760843-004.dlp6580N7091-777843-001nge/N7091-777843-001.dlp6780N7091-777843-001nge/N7091-777843-001.dlpFLX240N288X-660855-003nge/N288X-660855-003.dlpFLX280N588X-660855-003nge/N588X-660855-003.dlpFLX380N6091-660855-003nge/N6091-660855-003.dlpFLX380_allegheny N6091-760855-002nge/N6091-760855-002.dlpIOM Version Firmware FileCSM100FC9682nge/esm9682.s3rCSM100iSATA9728nge/esm9728.dlCSM20098D0nge/esm98D0.esmCSM20098D4nge/esm98D4.esmCSM20098E4nge/esm98E4.esmFLA3009682nge/esm9682.s3rFLA2009330nge/esm9330.s3rFLC200iSATA9728nge/esm9728.dlFLC200dSATA9566nge/esm9566.dlDisk Drive Version Firmware FileH106060SDSUN300G0804(LP2238-A2B0)disk/D_H106060SDSUN300G_0804.dlp H106060SDSUN600G0804(LP2238-A2B0)disk/D_H106060SDSUN600G_0804.dlp H7220AA30SUN2.0T0711(LP1160-A28A)disk/D_H7220AA30SUN2.0T_0711.dlp HDS7225SCSUN250G0705(LP1160-A7BA)disk/D_HDS7225SCSUN250G_0705.dlp HDS7240SBSUN400G AC7A disk/D_HDS7240SBSUN400G_AC7A.dlp HDS7250SASUN500G0705(LP1160-AV0A)disk/D_HDS7250SASUN500G_0705.dlp HUA7210SASUN1.0T0710(LP1160-AC5A)disk/D_HUA7210SASUN1.0T_0710.dlp HUA7250SBSUN500G0710(LP1160-AC5A)disk/D_HUA7250SBSUN500G_0710.dlp HUA7275SASUN750G0710(LP1160-AC5A)disk/D_HUA7275SASUN750G_0710.dlp HUS1014FASUN146G2A08disk/D_HUS1014FASUN146G_2A08.dlp HUS1030FASUN300G2A08disk/D_HUS1030FASUN300G_2A08.dlp HUS1073FASUN72G2A08disk/D_HUS1073FASUN72G_2A08.dlpHUS1530FCSUN300G E5B0disk/D_HUS1530FCSUN300G_E5B0.dlp HUS1561FCSUN600G E5B0disk/D_HUS1561FCSUN600G_E5B0.dlp MAT3073F SUN72G1403disk/D_MAT3073FSUN72G_1403.dlp MAT3147F SUN146G1403disk/D_MAT3147FSUN146G_1403.dlp MAT3300F SUN300G1403disk/D_MAT3300FSUN300G_1403.dlp MAW3073FCSUN72G1303disk/D_MAW3073FCSUN72G_1303.dlp MAW3147FCSUN146G1303disk/D_MAW3147FCSUN146G_1303.dlp MAW3300FCSUN300G1303disk/D_MAW3300FCSUN300G_1303.dlp MAX3073FDSUN72G0403disk/D_MAX3073FDSUN72G_0403.dlp MAX3147FDSUN146G0403disk/D_MAX3147FDSUN146G_0403.dlp ST31000NSSUN1.0T0708disk/D_ST31000NSSUN1.0T_0708.dlp ST31001NSSUN1.0T0704disk/D_ST31001NSSUN1.0T_0704.dlp ST314655FSUN146G3292disk/D_ST314655FSUN146G_3292.dlp ST314655FSUN146G3192disk/D_ST314655FSUN146G_3192.dlp ST314656FSUN146G091C disk/D_ST314656FSUN146G_091C.dlp ST314656FSUN146G0A1C disk/D_ST314656FSUN146G_0A1C.dlp ST314670FSUN146G055A disk/D_ST314670FSUN146G_055A.dlp ST314680FSUN146G0407disk/D_ST314680FSUN146G_0407.dlp ST314685FSUN146G042D disk/D_ST314685FSUN146G_042D.dlp ST314695FSUN146G0409disk/D_ST314695FSUN146G_0409.dlp ST32000NSSUN2.0T0704disk/D_ST32000NSSUN2.0T_0704.dlp ST32500NSSUN250G0706(LP1160-3AZY)disk/D_ST32500NSSUN250G_0706.dlp ST330000FSUN300G055A disk/D_ST330000FSUN300G_055A.dlp ST330055FSUN300G3292disk/D_ST330055FSUN300G_3292.dlp ST330055FSUN300G3192disk/D_ST330055FSUN300G_3192.dlp ST330056FSUN300G091C disk/D_ST330056FSUN300G_091C.dlp ST330056FSUN300G0A1C disk/D_ST330056FSUN300G_0A1C.dlp ST330057FSUN300G0705disk/D_ST330057FSUN300G_0705.dlp ST340008FSUN0.4T0443disk/D_ST340008FSUN0.4T_0443.dlp ST345056FSUN450G091C disk/D_ST345056FSUN450G_091C.dlp ST345056FSUN450G0A1C disk/D_ST345056FSUN450G_0A1C.dlp ST35000NSSUN500G0706(LP1160-3AZY)disk/D_ST35000NSSUN500G_0706.dlpST360057FSUN600G0605disk/D_ST360057FSUN600G_0605.dlpST360957FSUN600G9305disk/D_ST360957FSUN600G_9305.dlpST373207FSUN72G055A disk/D_ST373207FSUN72G_055A.dlpST373307FSUN72G0407disk/D_ST373307FSUN72G_0407.dlpST373453FSUN72G0449disk/D_ST373453FSUN72G_0449.dlpST373454FSUN72G042D disk/D_ST373454FSUN72G_042D.dlpST373455FSUN72G3292disk/D_ST373455FSUN72G_3292.dlpST373455FSUN72G3192disk/D_ST373455FSUN72G_3192.dlpST373554FSUN72G0409disk/D_ST373554FSUN72G_0409.dlpST37500NSSUN750G0706(LP1160-3AZY)disk/D_ST37500NSSUN750G_0706.dlpZ16IFE3B-73UC MS04disk/D_Z16IFE3B_73UC_3804204_800_012.dlpSun Storage J4000Series Arrays,Sun Storage F5100Flash Array,and Sun Blade6000Disk ModuleSIM Board Version Firmware FileStorage J42003A53qnt/J4200.3A53.fwStorage J44003R53qnt/J4400.3R53.fwStorage J44103524qnt/J4410.3524.fwExpander Board Version Firmware FileJ4500 5.3.73.0(0349)sun/sasxfwlo.5.03.73.fwF5100B 5.4.5.0(0405)sun/sasxfwmo.5.04.05.fwF5100 5.3.73.0(0349)sun/sasxfwmo.5.03.73.fwB6000Blade Storage 5.4.03.0(0403)sun/sasxfwnv.5.04.03.fwB6000NEM Plus 5.4.03.0(0403)sun/sasxfwnv.5.04.03.fwB6000NEM GOA 5.4.03.0(0403)sun/sasxfwnv.5.04.03.fwB6000NEM Hydra 5.4.03.0(0403)sun/sasxfwhv.5.04.03.fwFMOD Version Firmware FileSD88SA024SA0-SATA D129sun/D129.binSSD Version Firmware FileSSDSA2SH032G1SB8626sun/rel8626SunPhyParams.binDisk Drive Version Firmware FileH101414SCSUN146G SA25disk/H101414SC.SA25.fwH101473SCSUN72G SA25disk/H101473SC.SA25.fw H103030SCSUN300G A2A8disk/H103030SC.A2A8.fw H7220AA30SUN2.0T A28A disk/H7220AA30.A28A.fw HUA7210SASUN1.0T AC5A disk/HUA7210SA.AC5A.fw HUA7250SBSUN500G AC5A disk/HUA7250SB.AC5A.fw HUA7275SASUN750G AC5A disk/HUA7275SA.AC5A.fw HUS1514SBSUN146G SA04disk/HUS1514SB.SA04.fw HUS1530SBSUN300G SA04disk/HUS1530SB.SA04.fw HUS1573SBSUN72G SA04disk/HUS1573SB.SA04.fw MAY2073RCSUN72G0701disk/MAY2073R.0701.fw MBB2073RCSUN72G0705disk/MBB2073R.0705.fw MBB2147RCSUN146G0705disk/MBB2147R.0705.fw ST31000NSSUN1.0T SU15disk/ST31000NS.SU15.fw ST314655SSUN146G0D92disk/ST314655S.0D92.fw ST314656SSUN146G0B1C disk/ST314656S.0B1C.fw ST31001SSSUN1.0T0514disk/ST31001SS.0514.fwST32000SSSUN2.0T0514disk/ST32000SS.0514.fwST32500NSSUN250G3AZY disk/ST32500NS.3AZY.fw ST32502NSSUN250G SU15disk/ST32502NS.SU15.fw ST330055SSUN300G0D92disk/ST330055S.0D92.fw ST330056SSUN300G0B1C disk/ST330056S.0B1C.fw ST330057SSUN300G0705disk/ST330057S.0705.fwST340008SSUN0.4T0643disk/ST340008S.0643.fwST345056SSUN450G0B1C disk/ST345056S.0B1C.fw ST35000NSSUN500G3AZB disk/ST35000NS.3AZB.fw ST35002NSSUN500G SU15disk/ST35002NS.SU15.fw ST360057SSUN600G0705disk/ST360057S.0705.fwST373455SSUN72G0D92disk/ST373455S.0D92.fw ST37500NSSUN750G3AZB disk/ST37500NS.3AZB.fw ST37502NSSUN750G SU15disk/ST37502NS.SU15.fw ST914602SSUN146G0603disk/ST914602S.0603.fwST914603SSUN146G0868disk/ST914603S.0868.fwProduct DocumentationYou can view,print,or purchase a broad selection of documentation,including localized versions,at:/technetwork/indexes/documentation/index.htmlTechnical SupportIf you have technical questions about this product that are not answered in this document,go to:https://ST930003SSUN300G 0868disk/ST930003S.0868.fwST973402SSUN72G 0603disk/ST973402S.0603.fwST973451SSUN72G 0302disk/ST973451S.0302.fwCopyright ©2009,2011,Oracle and/or its affiliates.All rights reserved.Copyright ©2009,2011,Oracle et/ou ses affiliés.Tous droits réservés.Part No.: E25379-01August 2011。

AAMI标准

AAMI标准

Association for the Advancement of Medical Instrumentation协会中文名称:AAMI;美国医疗器械促进协会1 AAMI 7198-1998 (R 2004) CARDIOVASCULAR IMPLANTS - TUBUAL VASCULAR PROSTHESES-FDA RECOGNIZED2 AAMI 10993-1-2003 Biological evaluation of medical devices - Part 1: Evaluation and testing-FDA RECOGNIZED3 AAMI 10993-2-2006 Biological evaluation of medical devices - Part 2: Animal welfare requirements4 AAMI 10993-3-2003 Biological Evaluation of Medical Devices, Part 3: Tests for Genotoxicity, Carcinogenicity and Reproductive Toxicity5 AAMI 10993-4-2002 Biological evaluation of medical devices - Part 4: Selection of tests for interaction with blood-Incorporates Amendment 1: 20066 AAMI 10993-5-1999 BIOLOGICAL EVALUATION OF MEDICAL DEVICES, PART 5: TEST FOR IN VITRO CYTOTOXICITY-FDA RECOGNIZED7 AAMI 10993-6-1995 (R 2001) BIOLOGICAL EVALUATION OF MEDICAL DEVICES, PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION-FDA RECOGNIZED8 AAMI 10993-7-1995 (R 2001) Biological Evaluation of Medical Devices, Part 7: Ethylene Oxide Sterilization Residuals-Only FDA RECOGNIZED if used in conjunction to AAMI TIR19: 1988; Replaces AAMI ST29: 1988 and AAMI ST30: 1989 [Use: AAMI TIR19 AMD 1]9 AAMI 10993-9-1999 (R 2005) Biological evaluation of medical devices - Part 9: for identification and quantification of potential degradation products10 AAMI 10993-11-2006 Biological evaluation of medical devices - Part 11: Tests for systemic toxicity11 AAMI 10993-12-2002 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials-FDA RECOGNIZED12 AAMI 10993-13-1999 (R 2004) Biological evaluation of medical devices, Part 13: Identification and quantification of degradation products from polymeric devices.13 AAMI 10993-14-2001 (R 2006) BIOLOGICAL EVALUATION OF MEDICAL DEVICES, PART 14: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCT FROM CERAMICS14 AAMI 10993-15-2000 (R 2006) Biological evaluation of medical devices?Part 15: Identification and quantification of degradation products from metals and alloys15 AAMI 10993-16-1997 (R 2003) BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES FROM MEDICAL DEVICES16 AAMI 10993-17-2002 BIOLOGICAL EVALUATION OF MEDICAL DEVICES, PART17: ESTABLISHMENT OF ALLOWABLE LIMITS FOR LEACHABLE SUBSTANCES17 AAMI 11135 ERTA-2005 Medical devices ?Validation and routine control of ethylene oxide sterilization-Erratum issued: 20 January 1995 (print copy only) and Erratum issued: 6 April 2005 (PDF copy only)18 AAMI 11135-1994 Medical devices - Validation and routine control of ethylene oxide sterilization-FDA RECGOGNIZED; esignations: AAMI OPEO, AAMI ST27, and AAMI TIR1 [Refer to: AAMI TIR14, AAMI TIR15, AAMI TIR16, AAMI TIR20, AAMI TIR28]19 AAMI 11137-1-2006 Sterilization of health care products - Radiation - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices-Also replaces AAMI ST31, AAMI ST32, AAMI TIR520 AAMI 11137-3-2006 Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects-Also replaces AAMI ST31, AAMI ST32, AAMI TIR521 AAMI 11138-1-2006 Sterilization of health care products - Biological indicators - Part 1: General requirements [Refer to: AAMI 18472] 22 AAMI 11138-2-2006 Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes [Refer to: AAMI 18472]23 AAMI 11138-3-2006 Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes [Refer to: AAMI 18472]24 AAMI 11138-4-2006 Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization processes [Refer to: AAMI 18472]25 AAMI 11138-5-2006 Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and aldehyde sterilization processes [Refer to: AAMI 18472]26 AAMI 11607-2-2006 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for ing, sealing and assembly processes27 AAMI 11737-2-1998 Sterilization of Medical Devices - Microbiological Methods - Part 2: Tests of Sterility Per ed in the Validation of a Sterilization Process-FDA RECOGNIZED28 AAMI 13485-2003 Medical devices - Quality management systems - Requirements for regulatory purposes29 AAMI 14155-1-2003 Clinical investigation of medical devices for human subjects - Part 1: General requirements30 AAMI 14155-2-2003 Clinical investigation of medical devices for human subjects?Part 2: Clinical investigation plans31 AAMI 14160-1998 Sterilization of Single-Use Medical Devices Incorporating Materials of Animal Origin - Validation and Routine Control of Sterilization by Liquid Chemical Sterilants-FDA RECOGNIZED32 AAMI 14161-2000 Sterilization of health care products?Biological indicators?Guidance for the selection, use, and interpretation of results-FDA RECOGNIZED33 AAMI 14937-2000 Sterilization of health care products?General requirements for characterization of a sterilizing agent and the development, validation, and routine control of a sterilization process for medical devices-FDA RECOGNIZED34 AAMI 15223-2000 Medical Devices - Symbols to be used with medical device labels, labeling and in ation to be supplied.-FDA RECOGNIZED; Includes Amendment 1: 11/5/2001 and Amendment 2: 4/23/200435 AAMI 15225-2000 (R 2006) NOMENCLATURE - SPECIFICATION FOA A NOMENCLATURE SYSTEM FOR MEDICAL DEVICES FOR THE PURPOSE OF REGULATORY DATA EXCHANGE-Includes Amendment 1: 200436 AAMI 15674-2001 Cardiovascular implants and artificial organs —Hard shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags37 AAMI 15675-2001 Cardiovascular implants and artificial organs?Cardiopulmonary bypass systems?Arterial blood line filters38 AAMI 15882-2003 Sterilization of health care products - Chemical indicators - Guidance for selection, use, and interpretation of results-FDA RECOGNIZED39 AAMI 17665-1-2006 Sterilization of health care products - Moist heat - Part 1 Requirements for the development, validation and routine control of a sterilization process for medical devices- er Designation: AAMI ST2540 AAMI 25539-1 AMD 1-2005 Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses, Amendment 1: Test methods 41 AAMI 25539-1-2003 Cardiovascular implants?Endovascular devices?Part 1: Endovascular prostheses42 AAMI 60601-2-21-2000 Medical electrical equipment, Part 2: Particular requirements for the safety of infant radiant warmers-FDA RECOGNIZED; er Designation: AAMI II52; Incorporates Amendment 1: 2000 43 AAMI 62304-2006 Medical device software - Software life cycle processes [Refer to: AAMI TIR32]44 AAMI BE78-2002 BIOLOGICAL EVALUATION OF MEDICAL DEVICES, PART 10: TEST FOR IRRITATION AND DELAYED TYPE HYPERSENSITIVITY-In place of AAMI 10993-10; FDA RECOGNIZED45 AAMI BE83-2006 Biological evaluation of medical devices - Part 18: Chemical characterization of materials46 AAMI BF7-1989 (R 2002) Blood Transfusion Micro-Filters-FDA RECOGNIZED47 AAMI BF64-2002 LEUKOCYTE REDUCTION FILTERS48 AAMI 7199-1996 (R 2002) Cardiovascular implants and artificial organs - Blood-ga* **changers (oxygenators)49 AAMI BP22-1994 (R 2006) Blood Pressure Transducers-FDA RECOGNIZED; Incorporates Errata: 08/05/200450 AAMI 5840-2005 Cardiovascular implants - Cardiac valve prostheses-FDA RECOGNIZED51 AAMI DF80-2003 Medical electrical equipment, Part 2: Particular requirements for the safety of cardiac defibrillators [including automated external defibrillators]-Also repalces AAMI TIR252 AAMI EC11-1991 (R 2001) Diagnostic electrocardiographicdevices-FDA RECOGNIZED53 AAMI EC12-2000 (R 2005) Disposable ECG Electrodes-FDA RECOGNIZED54 AAMI EC13 ERTA-2002 Cardiac Monitors, Heart Rate Meters and Alarms55 AAMI EC13-2002 Cardiac Monitors, Heart Rate Meters and Alarms56 AAMI EC38-1998 Ambulatory Electrocardiographs-FDA RECOGNIZED57 AAMI EC53 ERTA-2001 ECG cables and leadwires-Includes Erratum issued: 31 May 199858 AAMI EC53-1995 (R 2001) ECG cables and leadwires59 AAMI EC57-1998 (R 2003) Testing and reporting per ance results of cardiac rhythm and ST segment measurement algorithms-Includes Errata: 4/14/2004; Revision of ECAR: 1987; FDA-Recognized60 AAMI EC71-2001 Standard Communications Protocol - Computer Assisted Electrocardiography-Proposed equivalency to IEC60601-2-53/Ed.1: Harmonized61 AAMI EQ56-1999 (R 2004) Recommended practices for a medical equipment management program62 AAMI ES60601-1-2005 Medical electrical equipment, Part 1: General requirements for basic safety and essential per ance63 AAMI HE48-1993 Human Factors Engineering Guidelines and Preferred Practices for the Design of Medical Devices64 AAMI HE74-2001 Human Factors Design Process for MedicalDevices-FDA RECOGNIZED65 AAMI HFMD-1996 An Introduction to Human Factors in Medical Devices66 AAMI ID26 ERTA-2006 Medical electrical equipment, Part 2: Particular requirements for the safety of infusion pumps and controllers 67 AAMI ID54-1996 (R 2005) Enteral Feeding Set Adapters and Connectors-FDA RECOGNIZED68 AAMI NS4-1986 (R 2002) Transcutaneous Electrical Nerve Stimulators69 AAMI NS14-1995 (R 2002) Implantable spinal cord stimulators70 AAMI NS15-1995 (R 2002) Implantable peripheral nerve stimulators71 AAMI NS28-1988 (R 2006) Intracranial Pressure Monitoring Devices-FDA RECOGNIZED; Incorporates Errata: 06/200172 AAMI PAC49-1993 (R 2000) Pacemaker Emergency Intervention System73 AAMI PB70-2003 LIQUID BARRIER PER ANCE AND CLASSIFICATION OF PROTECTIVE APPAREL AND DRAPES INTENDED FOR USE IN HEALTH CAREFACILITIES-FDA RECOGNIZED74 AAMI PC69-2000 ACTIVE IMPLANTABLE MEDICAL DEVICES ELECTROMAGNETIC COMPATIBILITY EMC TEST PROTOCOLS FOR IMPLANTABLE CARDIAC PACEMAKERS AND IMPLANTABLE CARDIOVERTER DEFIBRILLATORS75 AAMI RD5-2003 Hemodialysis Systems76 AAMI RD16 AMD 1-2002 (R 2005) Hemodialyzers-FDA RECOGNIZED77 AAMI RD16-1996 (R 2005) Hemodialyzers [Refer to: IEC 60601-2-16]78 AAMI RD17-1994 (R 2005) Hemodialyzer Blood Tubing-Includes Amendment 1: 200279 AAMI RD47-2002 Reuse of Hemodialyzers-Incorporates Amendment 1: 7/2003 and Errata: 07/200380 AAMI RD52-2004 Dialysate for hemodialysis81 AAMI RD62-2006 WATER TREATMENT EQUIPMENT FOR HEMODIALYSIS APPLICATIONS82 AAMI SP10-2006 Manual, electronic, or automated sphygmomanometers-FDA REGOGNIZED; Incorporates Amendment 1: 2003; Amendment 2: 200683 AAMI ST8-2001 Hospital Steam Sterilizers-FDA RECOGNIZED84 AAMI ST24-1999 (R 2005) Automatic, General-Purpose Ethylene Oxide Sterilizers and Ethylene Oxide Sterilant Sources Intended for Use in Health Care Facilities-FDA RECONIZED85 AAMI ST40-2004 Table-top dry heat (heated air) sterilization and sterility assurance in health care facilities-FDA RECOGNIZED86 AAMI ST41-1999 (R 2005) Ethylene Oxide Sterilization in Health Care Facilities: Safety and Effectiveness-FDA RECOGNIZED87 AAMI ST50-2004 Dry Heat (Heated Air) Sterilizers-FDA RECOGNIZED88 AAMI ST55-2003 Table-Top Steam Sterilizers-FDA RECOGNIZED89 AAMI ST63-2002 Sterilization of health care products—Requirements for the development, validation, and routine control of an industrial sterilization process for medical devices—Dry heat-FDA RECOGNIZED90 AAMI ST65-2000 PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES91 AAMI ST66-1999 STERILIZATION OF HEALTHCARE PRODUCTS - CHEMICAL INDICATORS - PART 2 : CLASS 2 INDICATORS FOR AIR REMOVAL TEST SHEETS AND PACKS-FDA RECOGNIZED [Refer to: AAMI 18472]92 AAMI ST67-2003 Sterilization of health care products—Requirements for products labeled “STERILE?FDA RECOGNIZED93 AAMI ST77-2006 Containment devices for reusable medical device sterilization94 AAMI ST81-2004 Sterilization of medical devices - In ation to be provided by the manufacturer for the processing of resterilizable medical devices-FDA RECOGNIZED95 AAMI TIR4-1989 Apnea Monitoring by Means of Thoracic ImpedancePneumography96 AAMI TIR11-2005 Selection and use of protective apparel and surgical drapes in health care facilities97 AAMI TIR12-2004 Designing, Testing and Labeling Reusable Medical Devices for Reprocessing in Health Care Facilities: A Guide for Device Manufacturers-2nd Edition98 AAMI TIR13-1997 Principles of Industrial Moist HeatSterilization-(Updated material from ANSI/AAMI ST25:1987 )99 AAMI TIR14-1997 Contract Sterilization for EthyleneOxide-Updated material from AAMI ST27; Cited by FDA as "relevant guidance" for ANSI/AAMI/ISO 11135: 1994; Includes Amendment 1: 2004 [Refer to: AAMI 11135 ERTA]100 AAMI TIR15-1997 Ethylene Oxide Sterilization Equipment, Process Considerations and Pertinent Calculations-Updated material from AAMI ST27; Cited by FDA as "relevant guidance" for ANSI/AAMI/ISO 11135: 1994 [Refer to: AAMI 11135 ERTA]101 AAMI TIR16-2000 PROCESS DEVELOPMENT AND PER ANCE QUALIFICATION FOR ETHYLENE OXIDE STERILIZATION - MICROBIOLOGICAL ASPECTS-Updated material from AAMI ST27; Cited by FDA as "relevant guidance" forANSI/AAMI/ISO 11135: 1994 [Refer to: AAMI 11135 ERTA]102 AAMI TIR17-1997 Radiation Sterilization MaterialQualification-Cited by FDA as "relevant guidance" for ANSI/AAMI/ISO 11137: 1994; Replaces AAMI ST32 [Refer to: AAMI 11137]103 AAMI TIR18-1997 Guidance on Electromagnetic Compatibility of Medical Devices for Clinical/Biomedical Engineers - Part 1: Radiated Radio-Frequency Electromagnetic Energy [Replaced by: IEC 61326-2-6] 104 AAMI TIR19 AMD 1-1999 Guidance for ANSI/AAMI/ISO 10993-7:1995, Biological evaluation of medical deices—Part 7: Ethylene oxide sterilization residuals Amendment105 AAMI TIR19-1998 Guidance for ANSI/AAMI/ISO 10993-7:1995, Biological Evaluation of Medical Devices - Part 7: Ethylene Oxide Sterilization Residuals-Replaces AAMI ST29 and AAMI ST30; Cited as relevant guidance to FDA-recognized standard ANSI/AAMI/ISO 10993-7 [Refer to: AAMI 10993-7]106 AAMI TIR20-2001 PARAMETRIC RELEASE FOR ETHYLENE OXIDE STERILIZATION-Cited by FDA as "relevant guidance" for ANSI/AAMI/ISO 11135: 1994 [Refer to: AAMI 11135 ERTA]107 AAMI TIR21-1998 Systems Used to Forecast Remaining Pacemaker Battery Service Life108 AAMI TIR22-1998 Guidance for ANSI/AAMI/ISO 11607, Packaging for Terminally Sterilized Medical Devices-AMD 1: 2001109 AAMI TIR23-1999 Signal Averaging110 AAMI TIR24-1999 Acquisition and use of physiologic wave databases for testing of medical devices111 AAMI TIR26-2000 Ventricular assist and heart replacement systems 112 AAMI TIR28-2001 PRODUCT ADOPTION AND PROCESS EQUIVALENCY FOR ETHYLENE OXIDE STERILIZATION [Refer to: ISO 11135, AAMI 11135 ERTA] 113 AAMI TIR29-2002 GUIDE FOR PROCESS CONTROL IN RADIATION STERILIZATION-Cited by FDA as "relevant guidance" for ANSI/AAMI/ISO 11137: 1994 [Refer to: AAMI 11137]114 AAMI TIR30-2003 A Compendium of processes, materials, test methods, and acceptance criteria for cleaning reusable medical devices 115 AAMI TIR31-2003 PROCESS CHALLENGE DEVICES/TEST PACKS FOR USE IN HEALTH CARD FACILITIES116 AAMI TIR32-2004 Medical device software risk management [Refer to: AAMI 14971, AAMI 62304]117 AAMI TIR35-2006 Sterilization of health care products - Radiation sterilization - Alternative sampling plans for verification dose experiments and sterilization dose audits- er designation: AAMI ST31, AAMI ST32, and AAMI TIR5118 AAMI TIR10993-19-2006 Biological evaluation of medical devices - Part 19: Physico-chemical, morphological and topographical characterization of materials119 AAMI TIR10993-20-2006 Biological evaluation of medical devices - Part 20: Principles and methods for immunotoxicology testing of medical devices120 AAMI TIR11139-2006 Sterilization of health careproducts ?Vocabulary121 AAMI TIR14969-2004 Medical devices—Quality management systems?Guidance on the application of ISO 13485:2003122 AAMI TIR15844-1998 Sterlization of Health Care Products - Radiation Sterlization - Selection of a Sterilization Dose for a Single Production Batch-Edition 1123 AAMI TIR16142-2005 Guidance on the selection of standards in support of recognized essential principles of safety and per ance of medical devices-2006 printing124 AAMI TIR19218-2006 Medical devices - Coding structure for adverse event type and cause125 AAMI TIR60878-2003 Graphical symbols for electrical equipment in medical practice126 AAMI TIR62296-2003 Considerations of unaddressed safety aspects in the Second Edition of IEC 60601-1 and proposals for new requirements [Refer to: IEC 60601-1]127 AAMI TIR62348-2006 Mapping between the clauses of the third edition of IEC 60601-1 and the 1988 edition as amended。

1拖1型XF-9000U研发维修用_全自动Spi Flash编程器

1拖1型XF-9000U研发维修用_全自动Spi Flash编程器
产品特点:
1. 真正硬件 USB 2.0 接口,速度高达 12Mbps。 2. 读写速度超快,读 EN25T80 只要 3 秒,写 EN25T80 只要 9 秒,是目前市面上速度最快的 BIOS 芯片编程器。
3. 自动识别芯片型号。 4. 自动检测芯片是否放好。 5. 自动选择芯片供电电压。 6. 自动脱机拷贝。 7. 支持 PC 软件和编程器固件升级。
***************24 EEPROM *******************
Copyright 2010-2015 《深圳市新峰微科技有限公司》 版权所有 QQ:1395151441 保留所有权利!
XF-9000U 高速编程器用户手册
ATMEL: AT24C01, AT24C01A, AT24C01B, AT24C02, AT24C02A, AT24C02B, AT24C04, AT24C04A, AT24C04B, AT24C08,
支持目前市场上几乎所有厂商的 24,25,93 系列芯片! ***************25 SPI FLASH ******************* AMIC: A25L05P, A25L512, A25L010, A25L10P, A25L020, A25L20P, A25L040, A25L40P, A25L080, A25L80P, A25L016, A25L16P, A25L032 ATMEL: AT25F512, AT25F512A, AT25F512B, AT25F1024, AT25F1024A, AT25FS010, AT25DF021, AT25F2048, AT25DF041A, AT25F4096, AT25FS040, AT26F004, AT26DF081A, AT25DF161, AT26DF161, AT26DF161A, AT25DF321, AT25DF321A, AT26DF321, AT25DF641 EON: EN25F05, EN25LF05, EN25P05, EN25D10, EN25F10, EN25LF10, EN25P10, EN25D20, EN25F20, EN25LF20, EN25D40, EN25F40, EN25LF40, EN25D80, EN25F80, EN25Q80, EN25T80, EN25B16, EN25B16T, EN25D16, EN25F16, EN25Q16, EN25T16, EN25B32, EN25B32T, EN25F32, EN25P32, EN25Q32, EN25B64, EN25B64T, EN25F64, EN25P64, EN25Q64, EN25F128, EN25Q128 ES: ES25P10, ES25P20, ES25M40, ES25M40A, ES25P40, ES25M80, ES25M80A, ES25P80, ES25M16, ES25M16A, ES25P16, ES25P32 ESMT: F25L004A, F25L04UA, F25L008A, F25L08PA, F25L016A, F25L16PA, F25L32PA, F25L32QA MXIC: MX25L512, MX25V512, MX25L1005, MX25L2005, MX25L4005A, MX25V4005, MX25L8005, MX25V8005, MX25L1605D, MX25L1635D, MX25L3205D, MX25L3225D, MX25L3235D, MX25L3237D, MX25L6405D, MX25L12805D NEXFLASH: NX25P10, NX25P20, NX25P40, NX25P80, NX25P16, NX25P32 PMC: PM25LV512A, PM25LV010A, PM25LV020, PM25LV040, PM25LV080B, PM25LV016B SAIFUN: SA25F005, SA25F010, SA25F020, SA25F040, SA25F080, SA25F160, SA25F320 SPANSION: S25FL004A, S25FL008A, S25FL016A, S25FL032A, S25FL064A SST: SST25VF512, SST25VF512A, SST25VF010, SST25VF010A, SST25VF020, SST25VF020A, SST25VF040, SST25VF040A, SST25VF040B, SST25VF080B, SST25VF016B, SST25VF032B, SST25VF064C ST: M25P05A, M25P10A, M25PE10, M25P20, M25PE20, M25P40, M25PE40, M25P80, M25PE80, M25PX80, M25P16, M25PE16, M25PX16, M25P32, M25PX32, M25P64, M25PX64, M25P128 WINBOND: W25P10, W25X10, W25X10A, W25X10AL, W25X10L, W25P20, W25X20, W25X20A, W25X20AL, W25X20L, W25P40, W25X40, W25X40A, W25X40AL, W25X40L, W25P80, W25X80, W25X80A, W25X80AL, W25X80L, W25P16, W25X16, W25P32, W25X32, W25X64

EZP2010高速编程器使用说明书

EZP2010高速编程器使用说明书

Product picture:Field of application:This programmer can read and write the bios chips of DVD,TV,PC,harddisk,etc. Features:1. USB2.0 interface, the speed is 12Mbps.2. The speed of reading and writing is very fast.3. Auto detect chip modles.4. Auto select power votage.6. Auto off-line chip copy.7. Software and firmware update.8. Surpport 25 FLASH, 24 EEPROM, 25 EEPROM, 93 EEPROM,etc.9. Small shape.10.Windows 2000, Windows XP, Windows Vista, Windows 7.List:1. Programmer 12. Usb cable 13. 5V power for off-line chip copy 14. Simple socket for SMD chips 2Copyright 2010-2015 elecm icro reserve all rights!This programmer supports all the 24, 25, 93 series memory chips!********************25 SPIFLASH******************************************************************* AMIC: A25L05P, A25L512, A25L010, A25L10P, A25L020, A25L20P, A25L040, A25L40P, A25L080, A25L80P, A25L016,A25L16P, A25L032ATMEL: AT25F512, AT25F512A, AT25F512B, AT25F1024, AT25F1024A, AT25FS010, AT25DF021, AT25F2048, AT25DF041A, AT25F4096, AT25FS040, AT26F004, AT26DF081A, AT25DF161, AT26DF161, AT26DF161A, AT25DF321, AT25DF321A,AT26DF321, AT25DF641EON: EN25F05, EN25LF05, EN25P05, EN25D10, EN25F10, EN25LF10, EN25P10, EN25D20, EN25F20, EN25LF20, EN25D40, EN25F40, EN25LF40, EN25D80, EN25F80, EN25Q80, EN25T80, EN25B16, EN25B16T, EN25D16, EN25F16, EN25Q16, EN25T16, EN25B32, EN25B32T, EN25F32, EN25P32, EN25Q32, EN25B64, EN25B64T, EN25F64, EN25P64, EN25Q64, EN25F128, EN25Q128 ES: ES25P10, ES25P20, ES25M40, ES25M40A, ES25P40, ES25M80, ES25M80A, ES25P80, ES25M16, ES25M16A, ES25P16,ES25P32ESMT: F25L004A, F25L04UA, F25L008A, F25L08PA, F25L016A, F25L16PA, F25L32PA, F25L32QAMXIC: MX25L512, MX25V512, MX25L1005, MX25L2005, MX25L4005A, MX25V4005, MX25L8005, MX25V8005, MX25L1605D, MX25L1635D, MX25L3205D, MX25L3225D, MX25L3235D, MX25L3237D, MX25L6405D, MX25L12805DNEXFLASH: NX25P10, NX25P20, NX25P40, NX25P80, NX25P16, NX25P32PMC: PM25LV512A, PM25LV010A, PM25LV020, PM25LV040, PM25LV080B, PM25LV016BSAIFUN: SA25F005, SA25F010, SA25F020, SA25F040, SA25F080, SA25F160, SA25F320SPANSION: S25FL004A, S25FL008A, S25FL016A, S25FL032A, S25FL064ASST: SST25VF512, SST25VF512A, SST25VF010, SST25VF010A, SST25VF020, SST25VF020A, SST25VF040, SST25VF040A, SST25VF040B, SST25VF080B, SST25VF016B, SST25VF032B, SST25VF064CST: M25P05A, M25P10A, M25PE10, M25P20, M25PE20, M25P40, M25PE40, M25P80, M25PE80, M25PX80, M25P16, M25PE16, M25PX16, M25P32, M25PX32, M25P64, M25PX64, M25P128WINBOND: W25P10, W25X10, W25X10A, W25X10AL, W25X10L, W25P20, W25X20, W25X20A, W25X20AL, W25X20L,W25P40, W25X40, W25X40A, W25X40AL, W25X40L, W25P80, W25X80, W25X80A, W25X80AL, W25X80L, W25P16, W25X16,W25P32, W25X32, W25X64********************24EEPROM******************************************************************* ATMEL: AT24C01, AT24C01A, AT24C01B, AT24C02, AT24C02A, AT24C02B, AT24C04, AT24C04A, AT24C04B, AT24C08, AT24C08A, AT24C08B, AT24C16, AT24C16A, AT24C16B, AT24C32, AT24C32A, AT24C32B, AT24C64, AT24C64A, AT24C64B, AT24C128, AT24C128A, AT24C128B, AT24C256, AT24C256A, AT24C256B, AT24C512, AT24C512A, AT24C512B, AT24C1024, AT24C1024A, AT24C1024BCATALYST: CAT24C01, CAT24WC01, CAT24C02, CAT24WC02, CAT24C04, CAT24WC04, CAT24C08, CAT24WC08, CAT24C16, CAT24WC16, CAT24C32, CAT24WC32, CAT24C64, CAT24WC64, CAT24C128, CAT24WC128, CAT24C256,CAT24WC256, CAT24C512, CAT24WC512, CAT24C1024, CAT24WC1024COMMON: 24C00 3V, 24C00 5V, 24C01 3V, 24C01 5V, 24C02 3V, 24C02 5V, 24C04 3V, 24C04 5V, 24C08 3V, 24C08 5V,24C16 3V, 24C16 5V, 24C32 3V, 24C32 5V, 24C64 3V, 24C64 5V, 24C128 3V, 24C128 5V, 24C256 3V, 24C256 5V, 24C512 3V,24C512 5V, 24C1024 3V, 24C1024 5VFAIRCHILD: FM24C01L, FM24C02L, FM24C03L, FM24C04L, FM24C05L, FM24C08L, FM24C09L, FM24C16L, FM24C17L, FM24C32L, FM24C64L, FM24C128L, FM24C256L, FM24C512L, FM24C1024LHOLTEK: HT24C01, HT24LC01, HT24C02, HT24LC02, HT24C04, HT24LC04, HT24C08, HT24LC08, HT24C16, HT24LC16,HT24C32, HT24LC32, HT24C64, HT24LC64, HT24C128, HT24LC128, HT24C256, HT24LC256, HT24C512, HT24C1024ISSI: IS24C01, IS24C02, IS24C04, IS24C08, IS24C16, IS24C32, IS24C64, IS24C128, IS24C256, IS24C512, IS24C1024 MICROCHIP: 24AA00, 24C00, 24LC00, 24AA01, 24AA014, 24C01C, 24LC014, 24LC01B, 24AA02, 24LC02B, 24AA024,24AA025, 24AA04, 24C02C, 24LC024, 24LC025, 24LC04B, 24AA08, 24LC08B, 24AA16, 24LC16B, 24AA32, 24LC32, 24AA64,24FC64, 24LC64, 24AA128, 24FC128, 24LC128, 24AA256, 24FC256, 24LC256, 24AA512, 24FC512, 24LC512, 24AA1024NSC: NSC24C02, NSC24C02L, NSC24C64RAMTRON: FM24C04A, FM24CL04, FM24C16A, FM24CL16, FM24C64, FM24CL64, FM24C256, FM24CL256, FM24C512 ROHM: BR24C01, BR24L01, BR24C02, BR24L02, BR24C04, BR24L04, BR24C08, BR24L08, BR24C16, BR24L16, BR24C32, BR24L32, BR24C64, BR24L64ST: ST24C01, ST24C02, ST24C04, ST24C08, ST24C16, ST24C32, ST24C64XICOR: X24C01, X24C02, X24C04, X24C08, X24C16********************93EEPROM******************************************************************* AKM: AK93C45AV, AK93C55AV, AK93C65AV, AK93C75AVATC: ATC93C46, ATC93LC46(16bit), ATC93LC46(16bit)-SOP8, ATC93LC46(8bit), ATC93LC46(8bit)-SOP8, ATC93C56,ATC93LC56(16bit), ATC93LC56(16bit)-SOP8, ATC93LC56(8bit), ATC93LC56(8bit)-SOP8, ATC93C66, ATC93LC66(16bit),ATC93LC66(16bit)-SOP8, ATC93LC66(8bit), ATC93LC66(8bit)-SOP8ATMEL: AT93C46(16bit), AT93C46(16bit)-SOP8, AT93C46(8bit), AT93C46(8bit)-SOP8, AT93C46A, AT93C56(16bit),AT93C56(16bit)-SOP8, AT93C56(8bit), AT93C56(8bit)-SOP8, AT93C57(16bit), AT93C57(16bit)-SOP8, AT93C57(8bit),AT93C57(8bit)-SOP8, AT93C66(16bit), AT93C66(16bit)-SOP8, AT93C66(8bit), AT93C66(8bit)-SOP8, AT93C86(16bit),AT93C86(16bit)-SOP8, AT93C86(8bit), AT93C86(8bit)-SOP8CATALYST: CAT93C46(16bit), CAT93C46(8bit), CAT93C46A, CAT93C46I, CAT93C56(16bit), CAT93C56(8bit), CAT93C56A, CAT93C57(16bit), CAT93C57(16bit)-SOP8, CAT93C66(16bit), CAT93C66(8bit), CAT93C66A, CAT93C86(16bit), CAT93C86(8bit) COMMON: 93C46(16bit), 93C46(8bit), 93C56(16bit), 93C56(8bit), 93C66(16bit), 93C66(8bit), 93C86(16bit), 93C86(8bit) EXEL: XL93C06, XL93C46, XL93CS46, XL93LC46, XL93C56, XL93LC56, XL93C66, XL93LC66FAIRCHILD: FM93C06AM8(16bit), FM93C06AM8(8bit), FM93C06M8, FM93C06N, FM93C46AM8(16bit),FM93C46AM8(8bit), FM93C46AN(16bit), FM93C46AN(8bit), FM93CS46(16bit), FM93C56AN(16bit), FM93C56AN(8bit),FM93CS56(16bit), FM93C66AM8(16bit), FM93C66AM8(8bit), FM93C66AN(16bit), FM93C66AN(8bit), FM93C66B,FM93C66M8(16bit), FM93C66MT8(16bit), FM93C66N(16bit), FM93CS66(16bit), FM93C86AM8(16bit), FM93C86AM8(8bit),FM93C86AN(16bit), FM93C86AN(8bit)HOLTEK: HT93LC46A(16bit), HT93LC46A(8bit), HT93LC56A(16bit), HT93LC56A(8bit), HT93LC66A(16bit),HT93LC66A(8bit)ICT: ICT93C46(16bit), ICT93C46(8bit), ICT93C56(16bit), ICT93C56(8bit), ICT93C66(16bit), ICT93C66(8bit)ISSI: IS93C46(16bit), IS93C56(16bit), IS93C66(16bit)MICROCHIP: 93C06(16bit), 93C06(16bit)-SOP8, 93AA46(16bit), 93AA46(8bit), 93AA46(8bit)-SOP8, 93C46(16bit),93C46(16bit)-SOP8, 93C46A, 93C46B, 93LC46(16bit), 93LC46(16bit)-SOP8, 93LC46(8bit), 93LC46(8bit)-SOP8, 93LC46A, 93LC46B, 93LC46B-SOP8, 93AA56(16bit), 93AA56(8bit), 93AA56(8bit)-SOP8, 93C56(16bit), 93C56(16bit)-SOP8, 93C56(8bit), 93C56(8bit)-SOP8, 93C56A, 93C56A-SOP8, 93C56B, 93C56B-SOP8, 93LC56(16bit), 93LC56(16bit)-SOP8, 93LC56(8bit), 93LC56(8bit)-SOP8,93LC56A, 93LC56B, 93LC56B-SOP8, 93AA66(16bit), 93AA66(8bit), 93AA66(8bit)-SOP8, 93C66(16bit), 93C66(16bit)-SOP8,93C66(8bit), 93C66(8bit)-SOP8, 93C66A, 93C66A-SOP8, 93C66B, 93C66B-SOP8, 93LC66(16bit), 93LC66(16bit)-SOP8, 93LC66(8bit), 93LC66(8bit)-SOP8, 93LC66A, 93LC66B, 93LC66B-SOP8, 93AA76(16bit), 93AA76(8bit), 93C76(16bit), 93C76(8bit), 93LC76(16bit), 93LC76(8bit), 93LC76A, 93LC76B, 93AA86(16bit), 93AA86(8bit), 93C86(16bit), 93C86(8bit), 93LC86(16bit), 93LC86(8bit), 93LC86A, 93LC86BNSC: NSC93C06, NSC93C06-SOP8, NSC93CS06, NSC93C46, NSC93CS46, NSC93C56, NSC93CS56, NSC93S56, NSC93C66, NSC93CS66, NSC93C86ROHM: BR93LC46, BR93LC46RF, BR93LC56, BR93LC56RF, BR93LC66, BR93LC66RFST: ST93C06, M93S46, M93S46-SOP8, M93S46-T8, M93S46R, M93S46R-SOP8, M93S46W, M93S46W-SOP8, ST93C46, M93S56, M93S56-SOP8, M93S56R, M93S56R-SOP8, M93S56W, M93S56W-SOP8, ST93C56, M93S66, M93S66-SOP8, M93S66R, M93S66R-SOP8, M93S66W, M93S66W-SOP8, ST93C66********************25EEPROM******************************************************************* ATMEL: AT25010, AT25020, AT25040, AT25080, AT25160, AT25320, AT25640, AT25128, AT25256, AT25512 CATALYST: CAT25C01, CAT25C01P, CAT25C01S, CAT25C01U, CAT25C02P, CAT25C02S, CAT25C02U, CAT25C03P, CAT25C03S, CAT25C03U, CAT25C04P, CAT25C04S, CAT25C04U, CAT25C05P, CAT25C05S, CAT25C05U, CAT25C08P, CAT25C08S, CAT25C08U, CAT25C09P, CAT25C09S, CAT25C09U, CAT25C16P, CAT25C16S, CAT25C16U, CAT25C17P, CAT25C17S, CAT25C17U, CAT25C32P, CAT25C32S, CAT25C33P, CAT25C33S, CAT25C64P, CAT25C64S, CAT25C65P, CAT25C65S, CAT25C128P, CAT25C128S, CAT25C256P, CAT25C256SCOMMON: 25010, 25020, 25040, 25080, 25160, 25320, 25640, 25128, 25256, 25512MICROCHIP: 25AA040, 25C040, 25LC040, 25AA080, 25C080, 25LC080, 25AA160, 25C160, 25LC160, 25AA320, 25C320, 25LC320, 25AA640, 25C640, 25LC640RAMTRON: FM25C160, FM25640, FM25CL64ST: ST25C01, ST25W01, ST25C02, ST25W02, ST25C04, ST25W04, ST25C08, ST25W08, ST25C16, ST25W16TI: TI2532, TI2532A, TI2564XICOR: XC25010, XC25020, XC25040, XC25080, XC25160, XC25320, XC25640, XC25128, XC25256, XC25512Copyright 2010-2015 elecm icro reserve all rights!software setupNo need to install, please run the *.exe programm. Copyright 2010-2015 elecm icro reserve all rights!driver setupThere are tow usb device driver files: EZP2010.inf and EZP2010.sys. The step of usb driver setup is same as other usb devices.Copyright 2010-2015 elecm icro reserve all rights!system requirementsSystem software requirements: Windows 2000,Windows XP,Windows Vista,Windows 7.System hardware requirements:USB1.0 interface.CD-ROM.64MB RAM.10MB harddisk space.Copyright 2010-2015 elecm icro reserve all rights!select chipUser can select chip modle from "Type", "Manu" and "Chip" combox. User can click "Search" to select chip modle too.Copyright 2010-2015 elecm icro reserve all rights!software UI1. Open File: Load data to buffer from file.2. Save File: Save data to file from buffer.3. Buffer Fill: Fill buffer to specified datas.4. Byte Swap: Swap the bytes in the buffer.5. Auto: Erase, write and verify.6. Erase: Erase chip.7. Write: Write data to chip from buffer.8. Read: Read data to buffer from chip.9. Verify: Compare the data in chip to the data in buffer.10.Detect: Detect chip modle.11.Version: Read firmware version.12.Update: Update firmware.13.Help: Open the user manual.14.About: View the version information of software. Copyright 2010-2015 elecm icro reserve all rights!editUser can change data in buffer. Copyright 2010-2015 elecm icro reserve all rights!Click "Search", then pop the above dialog, enter the keyword, the matched chips will be listed in the listbox. Copyright 2010-2015 elecm icro reserve all rights!Click "Detect", the software will pop a messagebox to show chip name. The programmer only can detect 25 series spi flash.Copyright 2010-2015 elecm icro reserve all rights!Load data to buffer from a bin file or a hex file. Copyright 2010-2015 elecm icro reserve all rights!Save data to a bin file from buffer. Copyright 2010-2015 elecm icro reserve all rights!firmware updateUser can click "Update" botton to update firmware.Select the correct update file (*.ezp), and the updating operation will complete in several seconds. If the operation is successful, the software will pop the messagebox as below:If the operation is unsuccessful, the software will pop the messagebox as below:First remove the programmer from PC, then click "OK", and link the programmer to PC again. Copyright 2010-2015 elecm icro reserve all rights!off-line copyThe programmer can copy one chip to another chip.When the programmer detects two chips on the socket, it will automatically start copying operation.1. When off-line copying, the programmer can link to 5V power as well as link to PC.2. The programmer can copy data to a 24 eeprom from another 24 eeprom.3. The programmer can copy data to a 25 flash from another 25 flash.4. The capacity of destination chip must be equal to source chip.Copyright 2010-2015 elecm icro reserve all rights!One 25 flash must be erased before writing.No need to erase one 24 eeprom before writting. No need to erase one 93 eeprom before writting.Copyright 2010-2015 elecm icro reserve all rights!Read data to buffer from chip. Copyright 2010-2015 elecm icro reserve all rights!Write data to chip from buffer. Copyright 2010-2015 elecm icro reserve all rights!Compare the data in chip to the data in buffer.It's necessary to execute the verify command after writting. Copyright 2010-2015 elecm icro reserve all rights!Erase, write and verify. Copyright 2010-2015 elecm icro reserve all rights!1. Verify error.(1)User must select a correct chip modle before writting.(2)User must erase chip before writting if che chip is a 25 flash.(3)User must select a correct memory unit width if che chip is a 93 eeprom.(4)The chip maybe bad.2. Chip position when reading and writting.(1)If the programmer is linked to PC, the chip must be placed in the socket as below:3. Automatically detect chip modle unsuccessful.See the section "detect chip" in this document.4. The simple SMD socket.The simple SMD socket has tow chip positions.User can place SMD chip on any one of the tow position.5. Read and write chips on the mainboard (ISP).User can link programmer to mainboard to read and write bios chips.User can link GND, CS, MISO, MOSI, CLK signals to mainboard.Copyright 2010-2015 elecm icro reserve all rights!。

RES2 交流电浪涌保护器用户手册说明书

RES2 交流电浪涌保护器用户手册说明书

RES2 Surge Protective Device for AC PowerUser ManualRES2 Surge Protective DeviceThe company reserves the right to modify the product and changethe specification. If there is any update, it will be notified separately.RES2-20Series、RES2-40Series、RES2-80SeriesGeneral Typical applications Schematic diagramDimensionsMaintenanceNomenclatureMain technical parametersRES2 series AC power SPDs are designed according to the IECand GB standards. It enable the connection between the powersupply system and an equipotential network instantaneouslywhen the surge occurs and limits the residual voltage to a certainlevel to protect the devices.R E S2-X X-X X X X X-3none:F:w/o remote signalwith remote signalNumber of naught wireBlank means one naught wire2 means 2 naught wires3 means 3 naught wires1P:1G:2P:1PN1:3P:3PN1:4P:Single phase(MOV)Single phase(GDT)Single phase TNSingle Phase TT(with GDT)3phase 4wire, TN-C/IT3phase 4 wire, TT(with GDT)3phase 5 wire, TN-S20:Max. discharge current, Imax:20kA40:Max. discharge current, Imax:40kA80:Max. discharge current, Imax:80kASeries numberCheck the status indicator and replace the failed module orwhole product if the status indicator is not all green.Connect the terminal blocks of remote signal with solid orstranded conductor. The conductor section area is small than1.5mm2 and strip length is between 6 and 7mm. Tightened byscrew with 0.2 Nm torque.Before Power on, Make sure the connection tightened firmlybetween conductors and terminal blocks and grounding isreliable.The product undergoes rigorous inspection and quality controlbefore leaving the factory. If abnormal conditions are found,please contact us.5 years guarantee from the date of delivery, free replacementof malfunction products.Status indicator:Working temperature:Relative humidity:Housing protection level (IEC60529):Housing Material/flame-retarded level (UL94)Installation:Test Standards:Protection level:Certificate Authority:Remote signal output:Green : OK ; Red : Failed-40°C~+70°C5%~95%IP 20PA66/V0Standard 35 mm DIN railGB/T18802.1;IEC61643-11Surge Protection level , class II for PowerShanghai lighting protection center250VAC/0.5A;24VDC/0.5AModelParameterNominal operating voltage UnMax, operating voltage UcNominal discharge cur. In(8/20us)Max. discharge cur. In(8/20us)Protection level UpResponse timeLeakage currentMax. backup fuseConnection wire section area L/NConnection wire section area PERES2-20RES2-40220V AC320V AC10kA20kA1.2kV<25ns<20μA40A≥2.5mm²≥4mm²220V AC385V AC20kA40kA1.7kV<25ns<20μA80A≥4mm²≥6mm²RES2-80220V AC385V AC40kA80kA2.0kV<25ns<20μA125A≥4mm²≥6mm²RES2-80G-255V AC40kA80kA1.2kV<100ns--≥4mm²≥6mm²Single phase TN systemTN-S systemSingle phase TT systemGreen-OKRed-failedRemote Signal Output0.14 mm² - 1.5mm²No.388,Xingpu Mid RD,Shipu Business Adminstrcition Estate,Qiandeng Town,Kunshan City,Jiangsu Province,China邮编:215343TEL:+86-512-5708-8588FAX:+86-512-5708-8600E-mail:******************中国江苏省昆山市千灯镇石浦工商管理区兴浦中路388号(215343)1、2、3、4、5、18.0 mm2P/1PN136.0mm72.0mm4P/3PN1。

MOXA EDS-408A 系列8口工业级Managed Ethernet交换机产品介绍说明书

MOXA EDS-408A 系列8口工业级Managed Ethernet交换机产品介绍说明书

EDS-408A Series8-port entry-level managed EthernetswitchesFeatures and Benefits•Turbo Ring and Turbo Chain(recovery time<20ms@250switches),and RSTP/STP for network redundancy•IGMP Snooping,QoS,IEEE802.1Q VLAN,and port-based VLAN supported •Easy network management by web browser,CLI,Telnet/serial console, Windows utility,and ABC-01•PROFINET or EtherNet/IP enabled by default(PN or EIP models)•Supports MXstudio for easy,visualized industrial network managementCertificationsIntroductionThe EDS-408A Series is designed especially for industrial applications.The switches support a variety of useful management functions,such as Turbo Ring,Turbo Chain,ring coupling,IGMP snooping,IEEE802.1Q VLAN,port-based VLAN,QoS,RMON,bandwidth management,port mirroring,and warning by email or relay.The ready-to-use Turbo Ring can be set up easily using the web-based management interface,or with the DIP switches located on the top panel of the EDS-408A switches.Additional Features and Benefits•DHCP Option82for IP address assignment with different policies•Supports EtherNet/IP,Modbus TCP and PROFINET1protocols fordevice management and monitoring•EtherNet/IP EDS(Electronic Data Sheet)file,custom AOI(Add-OnInstructions)and FactoryTalk®View faceplate available•PROFINET GSDML file and SIMATIC STEP7device icons available1•Port mirroring for online debugging•Port-based VLAN,IEEE802.1Q VLAN,and GVRP to ease networkplanning•QoS(IEEE802.1p and TOS/DiffServ)to increase determinism•RMON for proactive and efficient network monitoring•SNMPv1/v2c/v3for different levels of network management security•Bandwidth management to prevent unpredictable network status SpecificationsEthernet Interface10/100BaseT(X)Ports(RJ45connector)EDS-408A/408A-T,EDS-408A-EIP/PN models:8EDS-408A-MM-SC/MM-ST/SS-SC models:6EDS-408A-3M-SC/3M-ST/3S-SC/3S-SC-48/1M2S-SC/2M1S-SC models:5All models support:Auto negotiation speedFull/Half duplex modeAuto MDI/MDI-X connection100BaseFX Ports(multi-mode SC connector)EDS-408A-MM-SC/2M1S-SC models:2EDS-408A-3M-SC models:3EDS-408A-1M2S-SC models:1100BaseFX Ports(multi-mode ST connector)EDS-408A-MM-ST models:2EDS-408A-3M-ST models:3100BaseFX Ports(single-mode SC connector)EDS-408A-SS-SC/1M2S-SC models:2EDS-408A-2M1S-SC models:1EDS-408A-3S-SC/3S-SC-48models:31.EDS-408A-PN Series onlyStandards IEEE802.3for10BaseTIEEE802.3u for100BaseT(X)and100BaseFXIEEE802.3x for flow controlIEEE802.1D-2004for Spanning Tree ProtocolIEEE802.1p for Class of ServiceIEEE802.1Q for VLAN TaggingIEEE802.1w for Rapid Spanning Tree ProtocolOptical Fiber800Typical Distance4km5km40kmWavelengthTypical(nm)13001310TX Range(nm)1260to13601280to1340 RX Range(nm)1100to16001100to1600Optical PowerTX Range(dBm)-10to-200to-5 RX Range(dBm)-3to-32-3to-34 Link Budget(dB)1229 Dispersion Penalty(dB)31Note:When connecting a single-mode fiber transceiver,we recommend using anattenuator to prevent damage caused by excessive optical power.Note:Compute the“typical distance”of a specific fiber transceiver as follows:Linkbudget(dB)>dispersion penalty(dB)+total link loss(dB).Ethernet Software FeaturesFilter802.1Q VLAN,GMRP,GVRP,IGMP v1/v2,Port-based VLANIndustrial Protocols EtherNet/IP,Modbus TCP,EDS-408A-PN models:PROFINET IO Device(Slave) Management Back Pressure Flow Control,BOOTP,DHCP Option66/67/82,DHCP Server/Client,Flowcontrol,IPv4/IPv6,LLDP,Port Mirror,RARP,RMON,SMTP,SNMP Inform,SNMPv1/v2c/v3,Syslog,Telnet,TFTPMIB Bridge MIB,Ethernet-like MIB,MIB-II,P-BRIDGE MIB,RMON MIB Groups1,2,3,9,RSTP MIBRedundancy Protocols RSTP,STP,Turbo Chain,Turbo Ring v1/v2Time Management NTP Server/Client,SNTPSwitch PropertiesIGMP Groups256MAC Table Size8KMax.No.of VLANs64Packet Buffer Size1MbitsPriority Queues4VLAN ID Range VID1to4094Serial InterfaceConsole Port RS-232(TxD,RxD,GND),10-pin RJ45(115200,n,8,1)DIP Switch ConfigurationEthernet Interface Turbo Ring,Master,Coupler,ReserveInput/Output InterfaceAlarm Contact Channels Relay output with current carrying capacity of1A@24VDCPower ParametersConnection1removable6-contact terminal block(s)Input Voltage All models:Redundant dual inputsEDS-408A/408A-T,EDS-408A-MM-SC/MM-ST/SS-SC/3M-SC/3M-ST/3S-SC/1M2S-SC/2M1S-SC/EIP/PN models:12/24/48VDCEDS-408A-3S-SC-48/408A-3S-SC-48-T models:±24/±48VDCOperating Voltage EDS-408A/408A-T,EDS-408A-MM-SC/MM-ST/SS-SC/3M-SC/3M-ST/3S-SC/1M2S-SC/2M1S-SC/EIP/PN models:9.6to60VDCEDS-408A-3S-SC-48models:±19to±60VDC2Input Current EDS-408A,EDS-408A-EIP/PN/MM-SC/MM-ST/SS-SC models:0.61@12VDC0.3@24VDC0.16@48VDCEDS-408A-3M-SC/3M-ST/3S-SC/1M2S-SC/2M1S-SC models:0.73@12VDC0.35@24VDC0.18@48VDCEDS-408A-3S-SC-48models:0.33A@24VDC0.17A@48VDCOverload Current Protection SupportedReverse Polarity Protection SupportedPhysical CharacteristicsHousing MetalIP Rating IP30Dimensions53.6x135x105mm(2.11x5.31x4.13in)Weight EDS-408A,EDS-408A-MM-SC/MM-ST/SS-SC/EIP/PN models:650g(1.44lb)EDS-408A-3M-SC/3M-ST/3S-SC/3S-SC-48/1M2S-SC/2M1S-SC models:890g(1.97lb) Installation DIN-rail mounting,Wall mounting(with optional kit)Environmental LimitsOperating Temperature Standard Models:-10to60°C(14to140°F)Wide Temp.Models:-40to75°C(-40to167°F)Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsSafety All models:EN60950-1,UL508EDS-408A/408A-T,EDS-408A-MM-SC/MM-ST/SS-SC models,EDS-EIP/PN models:UL60950-1EMC EN55032/242.-60to-19VDC or19to60VDC.Do not mix power polarity systems.EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:6kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:10V/mIEC61000-4-4EFT:Power:2kV;Signal:2kVIEC61000-4-5Surge:Power:2kV;Signal:2kVIEC61000-4-6CS:10VIEC61000-4-8PFMFHazardous Locations EDS-408A,EDS-408A-MM-SC/MM-ST/SS-SC/EIP/PN models:ATEX,Class I Division2EDS-408A,EDS-408A-MM-SC/MM-ST/SS-SC models:IECExMaritime EDS-408A,EDS-408A-MM/SS-SC models:NKEDS-408A,EDS-408A-MM/SS-SC/EIP/PN models:DNVRailway EN50121-4Traffic Control NEMA TS2Freefall IEC60068-2-31Shock IEC60068-2-27Vibration IEC60068-2-6MTBFTime EDS-408A,EDS-408A-EIP/PN models:1,339,439hrsEDS-408A-MM-SC/MM-ST/SS-SC/3M-SC/3M-ST/3S-SC/1M2S-SC/2M1S-SC models:1,253,072hrsEDS-408A-3S-SC-48models:989,940hrsStandards Telcordia(Bellcore),GBWarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x EDS-408A Series switchCable1x RJ45-to-DB9console cableInstallation Kit4x cap,plastic,for RJ45portDocumentation1x product certificates of quality inspection,Simplified Chinese1x product notice,Simplified Chinese1x quick installation guide1x warranty cardDimensions Ordering InformationModel Name Layer Total No.ofPorts10/100BaseT(X)PortsRJ45Connector100BaseFXPortsMulti-Mode,SCConnector100BaseFXPortsMulti-Mode,STConnector100BaseFXPortsSingle-Mode,SCConnectorOperating Temp.EDS-408A288–––-10to60°CEDS-408A-T288–––-40to75°C EDS-408A-MM-ST286–2–-10to60°C EDS-408A-MM-ST-T286–2–-40to75°C EDS-408A-MM-SC2862––-10to60°C EDS-408A-MM-SC-T2862––-40to75°C EDS-408A-SS-SC286––2-10to60°C EDS-408A-SS-SC-T286––2-40to75°C EDS-408A-3M-ST285–3–-10to60°C EDS-408A-3M-ST-T285–3–-40to75°C EDS-408A-3M-SC2853––-10to60°C EDS-408A-3M-SC-T2853––-40to75°C EDS-408A-3S-SC285––3-10to60°C EDS-408A-3S-SC-T285––3-40to75°C EDS-408A-3S-SC-48285––3-10to60°C EDS-408A-3S-SC-48-T285––3-40to75°C EDS-408A-1M2S-SC2851–2-10to60°CEDS-408A-1M2S-SC-T2851–2-40to75°C EDS-408A-2M1S-SC2852–1-10to60°CEDS-408A-2M1S-SC-T2852–1-40to75°CEDS-408A-EIP288–––-10to60°C EDS-408A-EIP-T288–––-40to75°C EDS-408A-PN288–––-10to60°C EDS-408A-PN-T288–––-40to75°C Accessories(sold separately)Storage KitsABC-01Configuration backup and restoration tool for managed Ethernet switches and AWK Series wirelessAPs/bridges/clients,0to60°C operating temperaturePower SuppliesDR-120-24120W/2.5A DIN-rail24VDC power supply with universal88to132VAC or176to264VAC input byswitch,or248to370VDC input,-10to60°C operating temperatureDR-452445W/2A DIN-rail24VDC power supply with universal85to264VAC or120to370VDC input,-10to50°C operating temperatureDR-75-2475W/3.2A DIN-rail24VDC power supply with universal85to264VAC or120to370VDC input,-10to60°C operating temperatureMDR-40-24DIN-rail24VDC power supply with40W/1.7A,85to264VAC,or120to370VDC input,-20to70°Coperating temperatureMDR-60-24DIN-rail24VDC power supply with60W/2.5A,85to264VAC,or120to370VDC input,-20to70°Coperating temperatureSoftwareMXview-50Industrial network management software with a license for50nodes(by IP address)MXview-100Industrial network management software with a license for100nodes(by IP address)MXview-250Industrial network management software with a license for250nodes(by IP address)MXview-500Industrial network management software with a license for500nodes(by IP address)MXview-1000Industrial network management software with a license for1000nodes(by IP address)MXview-2000Industrial network management software with a license for2000nodes(by IP address)MXview Upgrade-50License expansion of MXview industrial network management software by50nodes(by IP address) Wall-Mounting KitsWK-46-01Wall-mounting kit,2plates,8screws,46x66.8x2mmRack-Mounting KitsRK-4U19-inch rack-mounting kit©Moxa Inc.All rights reserved.Updated May12,2022.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。

电针激活迷走神经-肾上腺轴的神经解剖学基础

电针激活迷走神经-肾上腺轴的神经解剖学基础

电针激活迷走神经-肾上腺轴的神经解剖学基础陈紫悦(译);韩清见(校);Liu SB;Wang ZF;Su YS【期刊名称】《中国疼痛医学杂志》【年(卷),期】2022(28)4【摘要】电针刺激 (ES) 通过躯体感觉自主神经反射来调控机体的生理功能(如抑制严重的炎症)。

二十世纪七十年代有学者认为针刺反射具有身体区域特异性(穴位特异性)。

例如,低强度 (0.5 mA,10 Hz) ES 小鼠后肢穴位足三里 (ST36) 可激活迷走神经-肾上腺抗炎通路,而 ES 腹部天枢穴 (ST25) 无效,这种现象的神经解剖学基础尚不清楚。

最近,在一项新的研究中,来自哈佛大学医学院、中国中医科学院和复旦大学的研究人员阐明了 ES 激活迷走神经-肾上腺轴抗炎通路的神经解剖学机制,并发现了由PROKR2^(Cre)标记的感觉神经元对激活迷走神经-肾上腺轴至关重要。

特异性敲除小鼠表达 PROKR2^(Cre)标记的 DRG 神经元,低强度电针 (0.5 mA) 刺激后肢 ST36 穴位不产生任何反应,不能使肾上腺释放儿茶酚胺类神经递质,也无法抑制细菌内毒素脂多糖 (LPS) 所诱发的全身炎症;而高强度电针 (3.0 mA)刺激后肢穴位 ST36 和腹部穴位 ST25 可激活交感神经抗炎通路。

该研究还发现,进一步运用交叉遗传的方法特异性诱导光敏感通道蛋白 CatCh 表达于 PROKR2^(Cre)标记的神经末梢,可以激活迷走神经-肾上腺抗炎通路,但不能激活交感神经-肾上腺抗炎通路。

此外,PROKR2^(Cre)神经纤维的分布可以预测低强度 ES 产生抗炎作用的身体区域(穴位特异性)。

该研究为穴位选择和特异性激活自主神经通路提供了神经解剖学基础。

尽管现代解剖学没有文献支持经络的物理存在,但针灸确实可以通过躯体神经反射来达到治疗效果。

这些反射始于背根神经节 (DRG) 和/或三叉神经节周围神经的激活,然后从脊髓向大脑传递感觉信息,进而激活外周自主神经通路,最终对机体进行调控。

Vastago Dixon 王者阀门与管线组件说明书

Vastago Dixon 王者阀门与管线组件说明书

Cant. x caja
Acero Inox. 316
# de parte
Cant. x caja
Hastelloy # de parte
½"
---
---
---
---
RST1
50
---
¾"
---
---
---
---
RST5
50
---
I
1"
---
---
---
---
RST10
50
---
1¼"
BST15
50
பைடு நூலகம்
un tramo acoplado de manguera en cualquier tamaño, debe ser probado a 1½ veces la presión de trabajo y mantenido así
por 15 minutos sin fuga o movimiento del acople.
2
---
8"
ST80
2
STC80
1
---
10"
ST100
1
STC100
1
---
12"
ST120
1
STC120
---
M
Tamaño
Aluminio # de parte
Cant. x Acero Inox. 316 Cant. x
caja
# de parte
caja
Hastelloy # de parte
B
material del Niple (Consulte páginas 647 a 652) Estos niples no son para productos compresibles como aire o nitrógeno en tamaños de 1¼" y mayores.
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
5
ES-ST25_CH.indb
5
2014/01/29

16:50:30
中文
警告
电源线不能更换,如果电源线损坏,此电 源适配器应废弃。 - 否则可能导致事故或受伤。
警告
如果电源适配器损坏,或者电源插头未牢 固插入家用电源插座,切勿使用本机。 - 否则可能造成触电或因短路引发火灾。 请勿损坏、折断、改装,或用力弯曲、拉 扯或扭曲电源线。 另外,请勿在电源线上面放置重物或挤压 电源线。 - 否则可能造成触电或因短路引发火灾。 使用时请勿超过家用电源插座或接线的额 定值。 - 如果在一个家用电源插座上连接过多插 头而使其超过额定值,可能会因过热而 引发火灾。 请勿自行改装或维修。 - 否则可能导致火灾、触电或受伤。 联系授权的维修中心进行维修(更换电 池等) 。 请勿存放在儿童和婴幼儿的接触范围之 内。请勿让儿童和婴幼儿使用。 - 将内刀头和 / 或清洁刷放入口中,或误 饮润滑油可能会造成事故和受伤。
以下标志用于对需要遵循的说明的种类进行分 类和描述。 此标志用于提醒用户注意禁止采取的操 作步骤。 此标志用于提醒用户注意为了安全操作 本产品而必须遵循的操作步骤。
4
ES-ST25_CH.indb
4
2014/01/29
16:50:29
如果发生异常和故障,应立即停止使用并 断开适配器。 - 在此类情况使用下可能会造成火灾、触 电或受伤。 <异常或故障情况> •• 本机、适配器或电源线变形或异常变热。 •• 本机、适配器或电源线发出烧焦的气味。 •• 本机、适配器或电源线在使用或充电过 程中发出异常声音。 - 立即请求授权的维修中心进行检查或维修。 不慎误食润滑油时,请勿勉强催吐,应大 量饮水,然后及时就医。 如润滑油不慎入眼,应立即用流水彻底清 洗,然后及时就医。 - 否则可能导致身体不适。 本产品不宜供肢体、感官或精神上有残疾 者、或缺乏经验和知识者(包括儿童)使 用,必须有监护者从旁监督并对本产品的 使用加以指导,且对使用者的安全能承担 责任。请避免儿童将本产品视为玩具,从 而引发危险。 - 否则可能导致事故或受伤。
: 内刀头 ; 修剪刀 修剪刀操纵杆 外刀部 外刀网释放按钮 入水口 电源适配器(RE7‑59) 适配器 电源插头 电源线
电源线插头 充电底座(RC9‑83) 充电端子 底座插孔 便携架 附件 清洁刷 润滑油
7
ES-ST25_CH.indb
7
2014/01/29

16:50:30
中文
注意
存放时,请勿将电源线缠绕在适配器或充 电底座上。 - 否则可能导致电源线断线,发生烫伤、 触电,或由于短路导致火灾。
警告
取出充电电池后,请勿将其放在儿童和婴 儿可触及的范围内。 - 不慎吞服电池会造成人身伤害。 如发生此种情况,应立即就医。 如电解液泄漏,应采取以下措施。请勿用 手直接接触电池。 - 电解液不慎入眼可能会导致失明。 请勿揉眼。应立即用清水冲洗眼睛,并 送医就诊。 - 如电解液不慎接触到皮肤或衣物,可能 会导致炎症或受伤。 应立即用清水彻底冲洗,并送医就诊。
使用须知
•• ES‑ST25 干 / 湿两用剃须刀,可以使用剃须 膏湿剃, 也可以干剃。 此剃须刀具有防水功能。 可放入水中清洗,也可在淋浴时使用。下图 标志表示适合用在洗澡或淋浴中。
ES-ST25_CH.indb
中文 8
►► 注意 •• 使用剃须膏湿剃三周后,您能体会到一些变 化。由于您的皮肤和胡须约需一个月时间才 能适应新的剃须方式,因此您可能需要一点 时间来适应 Panasonic 干 / 湿两用剃须刀。 •• 请确认剃须刀装有两个内刀头,若仅装有一 个内刀头的话,剃须刀可能已经损坏。 •• 可用清水清洗剃须刀,不要使用盐水或热水。 不要将剃须刀长时间浸泡在水中。 •• 请勿使用涂料稀释剂,苯,酒精或者其他化 学品清洁本产品,否则可能导致本体发生破 裂或褪色,可使用稍稍醮有自来水或肥皂水 的软布清洁外壳。 •• 请在使用后将剃须刀存放在干燥的地方。 •• 不要将剃须刀存放在阳光直射或有其他热源 的地方。
感谢您购买这款 Panasonic 产品。 在使用本产品前,请仔细阅读本说明书并妥善保管,以备将来参考。
3
ES-ST25_CH.indb
3
2014/01/29

16:50:29
中文
安全注意事项
中文
警告
进行清洁时,请务必将适配器从家用电源 插座上拔下。 - 否则可能导致触电或受伤。 请务必确保电源适配器的工作电压符合其 额定电压。 适配器或电源线插头要插紧到根部。 - 否则可能引发火灾或触电。 定期清洁电源插头、电源线插头和侧面端 子,防止灰尘积聚。 - 否则可能因潮湿造成绝缘故障,从而引 发火灾。 断开适配器,并用干布进行擦拭。
10
•• 约 1 小时,即可完成充电。 充电时间可能会缩短,视充电量而定。
ES-ST25_CH.indb
10
2014/01/29
16:50:31
充电时
充电完成后
充电异常
使用剃须刀
充电状态指 充电状态指 示灯( ) 示灯( ) 呈红色亮起。 熄灭。 充电状态指示 灯( )将每 秒闪烁两次。
1 按下电源开关选择所需的剃须模式。 •• 每次按下电源开关,剃须模式会从“剃须感
使用说明书 (另附保修证) (家用) 电动剃须刀 型号 ES‑ST25
中文�������������������������������������� 3
English ������������������������������������������� 21
ES-ST25_CH.indb
1
2014/01/29
9
ES-ST25_CH.indb
9
2014/01/29

16:50:31
中文
使用前
中文
充电
可在装有便携架的情况下给剃须刀充电。
►► 使用便携架 剃须刀可垂直或水平放置。携带剃须刀时,可 用便携架保护外刀网并防止开关误操作。 •• 携带剃须刀时,请务必在安装便携架前清除 胡须碎屑。
1 将电源线插头插入底座
为减少故障、触电、受伤、火灾、死亡以及设 备或财产损坏的危险,请务必遵守以下安全注 意事项。
标志说明
以下标志用于对因无视标志说明和使用不当而 导致的危险、伤害和财产损失的程度进行分类 和描述。
危险 警告 注意
表示将会导致重伤或死亡的潜 在危险。 表示可能会导致重伤或死亡的 潜在危险。 表示可能会导致轻伤的危险。
6
2014/01/29
16:50:30
请勿将外刀网过度压向嘴唇或面部其他部 位。请勿将外刀网直接接触伤疤或损伤的 皮肤。 - 否则可能导致皮肤受伤。 请勿用力按压刀头。此外, 在使用过程中, 也不要用手指或指甲触碰外刀网。 - 否则可能导致皮肤受伤或缩短外刀网使 用寿命。 请勿触摸内刀头的刀头部分(金属部分) 。 - 否则可能导致您的手受伤。 请勿使用本产品剃除头发或身体其他部位 的毛发。 - 否则可能导致皮肤受伤或缩短外刀网使 用寿命。 不要与您的家人或其他人员共用剃须刀。 - 否则可能引起感染或炎症。 请避免本产品跌落或受到冲击。 - 否则可能导致受伤。
16:50:29
2
ES-ST25_CH.indb
2
2014/01/29
16:50:29
使用说明书 (家用) 电动剃须刀 型号 ES‑ST25
目录
安全注意事项................... 4 使用须知....................... 8 各部分名称..................... 9 使用前........................ 10 充电.......................... 10 使用剃须刀.................... 11 清洗剃须刀.................... 13 故障排除...................... 16 电池寿命...................... 18 内置式充电电池的取出方式...... 19 规格.......................... 19
6
除废弃本产品时以外,切勿进行拆解。 - 否则可能导致火灾、触电或受伤。
ES-ST25_CH.indb
中文
注意
不充电时,请将适配器从家用电源插座上 拔下。 - 否则可能因绝缘性能下降而导致漏电, 从而引发触电或火灾。 在使用前, 请检查外刀网是否破裂或变形。 - 外刀网破裂或变形可能造成皮肤损伤。 外出携带或存放时,请务必将剃须刀放在 便携架内。 - 否则可能导致皮肤受伤或缩短外刀网使 用寿命。 应握住适配器或电源线插头而非电源线进 行插拔。 - 握住电源线进行插拔可能会导致触电或 受伤。 请勿让针头或杂物粘附在电源插头、电源 线插头或侧面端子上。 - 否则可能造成触电或因短路引发火灾。
8
2014/01/29
16:50:31
各部分名称

正面

背面










机身 外刀网 外刃架 外刃架释放按钮 清洁叶窗 指握位置 侧面端子 电源开关 剃须感应灯( ) 充电状态指示灯( )
4 完成充电后应断开适配器连接。 •• 给电池充电 1 小时以上不会影响电池性能。
剃须感应灯 剃须感应灯 剃须感应灯 ( )呈蓝色 ( )熄灭。 ( )熄灭。 亮起。
11
ES-ST25_CH.indb
11
2014/01/29

16:50:32
中文
注意 充电过程中无ຫໍສະໝຸດ 使用剃须刀。2 如图所示握住剃须刀剃
请妥善处理本产品的包装袋,使其远离婴 幼儿。 - 否则可能导致婴幼儿窒息等意外发生。 本剃须刀内置充电电池,请不要将其丢入 火中进行加热或在高温环境中充电、使用 和保管。 - 否则会导致过热、起火或爆炸。 请勿用湿手在家用电源插座上插拔适配器。 - 否则可能导致触电或受伤。 请勿将电源适配器和充电底座浸入水中或 用水清洗。 - 否则可能造成触电或因短路引发火灾。 切勿在浴室或淋浴房使用电源适配器及充 电底座。 - 否则可能造成触电或因短路引发火灾。 请勿使用附带的电源适配器和充电底座之 外的其他充电装置。此外,请勿使用附带 的电源适配器和充电底座对其他产品充电。 - 否则可能因短路而导致灼伤或火灾。
相关文档
最新文档