法国螺钉标准(NF screw standards)

编号中文名称英文名称
NF B51-128-1993纤维板.螺钉轴向抽出阻力的测定(FIBREBOARDS. DETERMINATION OF RESISTANCE TO AXIAL WITHDRAWAL OF SCREWS. (EUROPEAN STANDARD EN 320).)
NF B51-260-1972木屑板.螺丝拔除试验(PARTICLE BOARD. TEST FOR WITHDRAWAL OF SCREWS.)
NF C20-115-1971标定截面不超过2.5mm**2，线芯无特殊预加
工的硬铜导线连接的无螺钉接线端
(TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OF
CONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTION
NOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OF
THE CONDUCTOR)
NF C20-116-1981室外铜导线用螺钉丝端子(Terminals with screw campling for external copper conductors.)
NF C60-002-1994家用及类似用低压电路用连接装置.第2-2部
分:不带螺钉型夹件的分开的部件连接装置
的特别要求
(Connecting devices for low voltage circuits for household
and similar purposes. Part 2-2 : particular requirements
for connecting devices as separate entities with screwless-
type clamping units)
NF C83-403-803-2003详细规范:防松螺钉不可拆卸的厚度为0.8MM
的带扁平触点的矩形连接器
(Detail Specification : rectangular connectors - Flat
contacts, 0,8 mm thickness, locking screw not detachable.)
NF C93-561-1981电子元件.螺钉锁定的小型同轴接头.一般规
定
(Components for electronic equipment. Miniature coaxial
connectors with screw coupling. General requirements.)
NF C93-566-1981电子元件.螺钉锁定射频用同轴接头（ＫＮ
系列）.一般规定
(ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW
COUPLING (TYPE KN). GENERAL REQUIREMENTS.)
法国螺钉标准(NF screw standards)
NF C93-578-1996射频连接件.第20部分:外导线内径为
13.56mm(0,534 in)同时带有两条内导线的
屏蔽平衡电缆用双头螺钉(3/4-20统
(Radio-frequency connectors. Part 25 : two-pole screw (3/4-
20 unef) coupled connectors for use with shielded balanced
cables having twin inner conductors with inner diameter of
outer conductor1356mm(0534in)(type twhn))
NF E02-312-1981钢制规.螺丝孔莫氏锥环规(STEEL GAUGES. MORSE TAPER RING GAUGES.) NF E02-316-1981钢制规.螺丝孔５％锥度环规(STEEL GAUGES. METRIC TAPER RING GAUGES.)
NF E03-152-1981用极限量规检验螺纹.螺钉用螺纹规(Thread checking with limit gauges. Threaded gauges for screw.)
NF E03-154-1970公制三角螺纹.用极限规检验螺纹.螺钉和螺
钉孔光滑度检查器
(THREAD CHECKING WITH LIMIT GAUGES. PLAIN GAUGES FOR SCREWS
AND NUTS.)
NF E04-012-1-1996技术制图.螺钉和螺纹部件.第1部分:通用规
范
(Technical drawings. Screw threads and threaded parts. Part
1 : general conventions.)
NF E04-012-2-1996技术制图.螺钉和螺纹部件.第2部分:螺纹嵌
镶件
(TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART
2 : SCREW THREAD INSERTS. (EUROPEAN STANDARD EN ISO 6410-
2).)
NF E04-012-3-1996技术制图.螺钉和螺纹部件.第3部分:简化表
示
(TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADED
PARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEAN
STANDARD EN ISO 6410-3).)
NF E22-201-1992滚珠螺钉.第1部分:词汇和命名(Ball screws. Part 1 : vocabulary and designation.)
NF E22-202-1992滚珠螺钉.第2部分:公称直径和公称引线.米
制系列
(Ball screws. Part 2 : nominal diameters and nominal leads.
Metric series.)
NF E22-203-1993球端螺钉.第3部分:合格条件和合格试验(Ball screws. Part 3 : acceptance conditions and acceptance tests.)
NF E25-011-1992紧固件的机械特性.由非亚铁金属制造的螺
栓,螺钉,柱螺栓和螺母
(MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS
AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN
28839).)
NF E25-018-2-1994沉头螺钉.第2部分:十字槽(CONTERSUNK FLAT HEAD SCREWS. PART 2 : PENETRATION DEPTHY OF CROSS RECESSES. (EUROPEAN STANDARD EN ISO 7721-2).)
NF E25-021-1994螺钉的十字槽(欧洲标准EN ISO 4757)(Cross recesses for screws.)
NF E25-022-1-2001紧固件公差.螺栓、螺钉、双头螺栓和螺母.
第1部分:产品等级A、B及C
(Tolerances for fasteners - Bolts, screws, studs and nuts -
Part 1 : product grades A, B and C.)
NF E25-022-1987紧固件.Ｆ级螺钉和螺帽公差（精密机械）.
螺纹直径1到3mm
(FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT
GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3
MM.)
NF E25-023-1992紧固件.螺栓和螺钉的自由尺寸孔(Fasteners. Clearance hole for bolts and screws.)
NF E25-100-1-1999碳钢合金制成的紧固件的机械性能.第1部
分:螺栓、螺钉和螺柱
(Mechanical properties of fasteners made of carbon steel
and alloy steel - Part 1 : bolts, screws and studs.)
NF E25-100-3-1992紧固件.表面不连续性.第1部分:一般要求的
螺栓、螺钉和螺柱
(FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS
AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN
26157-1).)
NF E25-100-4-1992紧固件.表面不连续性.第3部分:特殊要求的
螺栓、螺钉和螺柱
(FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW
AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN
26157-3).)
NF E25-100-5-1998碳钢和不锈钢制紧固件的机械性能.第5部
分:不处在拉伸应力下的固定螺钉和类似螺
纹紧固件
(Mechanical properties of fasteners made of carbon steel
and alloy steel. Part 5 : set screws and similar threaded
fasteners not under tensile stresses.)
NF E25-100-6-1998不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝
和双端螺栓
(Mechanical properties of corrosion-resistant stainless-
steel fasteners. Part 1 : bolts, screws and studs.)
NF E25-100-7-1995紧固件的机械性能.第7部分:公称直径1-
10mm的螺栓和螺钉的扭力试验和最小扭矩
(MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL
TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL
DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)
NF E25-100-8-1998不锈钢紧固件耐腐蚀的机械特性.不低于拉
伸应力下配套螺钉和类似紧固件
(Mechanical properties of corrosion-resistant stainless-
steel fasteners. Part 3 : set screws and similar fasteners
not under tensile stress.)
NF E25-107-1983金属用螺钉.内部六叶埋头.Ａ级.符号ＦＸ(SCREWS. SIX LOBES RECESSED CONTERSUNK HEAD. PRODUCT GRADE A. SYMBOL FX.)
NF E25-108-2001半埋头内六角螺钉(Hexalobular socket raised countersunk head screws.) NF E25-109-2001平头内六角螺钉(Hexalobular socket pan head screws.)
NF E25-110-2001圆柱头内六角螺钉(Hexalobular socket head cap screws.)
NF E25-111-2001凸头内六角螺钉(Hexalobular socket cheese head screws.)
NF E25-114-2001六角头螺钉.产品等级A和B(Hexagon head bolts - Product grades A and B.)
NF E25-115-2-2001六角头螺钉.产品等级C(Hexagon head screws - Product grade C.)
NF E25-116-1983金属用螺钉.方头.标准杆.A和B级.符号Q(Square head screws. Product grades A and B. Symbol Q.) NF E25-117-1983金属用螺钉.方头.全螺纹.A和B级.符号Q(Square head screws. Product grades A and B. Symbol Q.) NF E25-118-1983金属用螺钉.方头.C级.符号Q(Square head screws. Product grade C. Symbol Q.)
NF E25-119-1-1994带有H型或Z型的十字槽沉头螺钉(普通头
型).产品等级A.第1部分:性能类别4.8的钢
(Countersunk flat head screws (common head style) with type
H or type Z cross recessed. Product grade A. Part 1 : steel
of property class 4.8.)
NF E25-119-2-1994十字槽沉头螺钉(一般头形).等级A.第2部
分:8.8类特性钢,不锈钢和有色金属
(Cross recessed countersunk flat head scews (common head
style). Grade A. Part 2 : steel of property class 8.8,
stainless steel and non-ferrous metals.)
NF E25-120-1994带有H型或Z型的十字槽半沉头螺钉(普通头
型).产品等级A
(Countersunk raised head screws (common head style) with
type H or type Z cross recessed. Product grade A.)
NF E25-121-1994带有H型或Z型十字槽的平圆头螺钉.产品等
级A
(Pan head screws with type H or type Z cross recess.
Product grade A.)
NF E25-122-1984金属用螺钉.称作“POLIER“的Z十字槽宽圆
头.A级.符号RLZ
(SCREWS. CROSS RECESSED MUSHROOM HEAD (POELIERS). PRODUCT
GRADE A. SYMBOL RL Z.)
NF E25-123-1994一字槽沉头螺钉(普通头型).产品等级A (Slotted countersunk flat head screws (common head style). Product grade A.)
NF E25-124-1994一字槽半沉头螺钉(普通头型).产品等级A (Slotted raised countersunk head screws (common head style). Product grade A.)
NF E25-126-1997内六角圆头螺钉(HEXAGON SOCKET BUTTON HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7380).)
NF E25-128-1994一字槽平圆头螺钉.产品等级A(Slotted pan head screws. Product grade A.)
NF E25-130-1986加垫圈的金属用螺钉.锥形光滑压紧垫圈.Ａ
级
(SCREWS WITH CONICAL SPRING TIGHTENING WASHER. PRODUCT
GRADE A.)
NF E25-131-1986加垫圈的金属用螺钉.内齿锥形垫圈.Ａ级(SCREWS WITH CONICAL SPRING INTERNAL TOOTHED TIGHTENING WASHER. PRODUCT GRADE A.)
NF E25-132-1986加垫圈的金属用螺钉.外齿垫圈.Ａ级(SCREWS WITH SERRATED EXTERNAL OVERLAPED TOOTHED LOCK TIGHTENNING WASHER. PRODUCT GRADE A.)
NF E25-133-1987紧固件.螺杆千斤顶用的金属螺钉.短六角头
长制动端螺钉.Ａ和Ｂ级.符号ＨＺ
(Fasteners. Screws for screw-jacks. Small hexagon head
screws with long dog point. Product grades A and B. Symbol
HZ.)
NF E25-134-1987紧固件.螺杆千斤顶用的金属螺钉.短方头短
制动端螺钉.Ａ和Ｂ级.符号ＱＺ
(Fasteners. Screws for screw-jacks. Small square head
screws with short dog point. Product grades A and B. Symbol
QZ.)
NF E25-139-1987紧固件.金属用螺钉.Ｚ十字槽宽凸圆柱形
头.Ａ级.符号ＣＢＬＺＳ
(FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD.
GRADE A. SYMBOL CBL ZS.)
NF E25-142-1991紧固件.电阻焊金属螺钉.缩小头(FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.)
NF E25-149-1998十字槽圆头螺钉(CROSS RECESSED CHEESE HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7048).)
NF E25-150-1998带平垫圈的螺钉和垫圈组件.垫圈强度等级
为200 HV和300 HV.
(Screw and washer assemblies with plain washers. Washer
hardness classes 200 HV and 300 HV.)
NF E25-151-2001米制细牙螺纹的六角头螺钉.产品等级A和B (Hexagon head screws with metric fine pitch thread -Product grades A and B.)
NF E25-160-1992平端开槽调整螺钉(SLOTTED SET SCEWS WITH FLAT POINT. (EUROPEAN STANDARD EN 24766).)
NF E25-161-1992锥端开槽调整螺钉(SLOTTED SET SCEWS WITH CONE POINT. (EUROPEAN STANDARD EN 27434).)
NF E25-162-1992长制动端开槽调整螺钉(SLOTTED SET SCREWS WITH LONG DOG POINT. (EUROPEAN STANDARD EN 27435).)
NF E25-163-1992蝶形端开槽调整螺钉(SLOTTED SET SCEWS WITH CUP POINT. (EUROPEAN STANDARD EN 27436).)
NF E25-501-2000紧固件公差.第3部分:螺栓、螺钉和螺母用
平垫圈.A级和C级
(Tolerances for fasteners - Part 3 : plain washers for
bolts, screws and nuts - Product grades A and C.)
NF E25-520-1998螺丝和洗衣机组件用水平式洗衣机.小型,常
规型和大型系列.A级产品
(PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL,
NORMAL AND LARGE SERIES. PRODUCT GRADE A. (EUROPEAN
STANDARD EN ISO 10673).)
NF E25-525-2000通用米制螺栓、螺钉和螺母用平垫圈.一般
示意图
(Plain washers for metric bolts, screws and nuts for
general purposes - General plan.)
NF E25-600-1984紧固件.木螺钉系列标准(FASTENERS. WOOD SCREWS FAMILY STANDARD.)
NF E25-601-1984十字槽沉头木螺钉.符号FZ(CROSS RECESSED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FZ.)
NF E25-602-1984十字槽沉头木螺钉.符号FBZ (CROSS RECESSED RAISED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FBZ.)
NF E25-603-1984一字槽圆头木螺钉.符号RZ(CROSS RECESSED ROUND HEAD WOOD SCREWS. SYMBOL RZ.)
NF E25-604-1984有槽沉头木螺钉.符号FS(Slotted countersunk head wood screws. Symbol FS.)
NF E25-605-1984木螺丝.一字槽沉头.FBS符号(Slotted raised countersunk head wood screws. Symbol FBS.) NF E25-609-1985木螺钉.螺丝眼(WOODSCREWS. SCREW-EYES.)
NF E25-609-1985木螺钉.螺丝眼(WOODSCREWS. SCREW-EYES.)
NF E25-610-1985木螺钉.螺丝钩(WOODSCREWS. SCREW-HOOKS.)
NF E25-610-1985木螺钉.螺丝钩(WOODSCREWS. SCREW-HOOKS.)
NF E25-611-1985木螺钉.直角弯头螺丝钩(WOODSCREWS. SQUARE BEND SCREW HOOKS.)
NF E25-611-1985木螺钉.直角弯头螺丝钩(WOODSCREWS. SQUARE BEND SCREW HOOKS.)
NF E25-650-1-1994热处理钢自攻螺钉.机械性能(Heat-treated steel tapping screws. Mechanical properties.) NF E25-650-2-1999自攻螺钉螺纹(Tapping screw thread.)
NF E25-651-2003耐腐蚀不锈钢紧固件的机械特性.第4部分:
攻丝螺钉
(Mechanical properties of corrosion-resistant stainless
steel fasteners - Part 4 : tapping screws.)
NF E25-652-2001沉头内六角攻丝螺钉(Hexalobular socket countersunk head tapping screws.)
NF E25-653-2001半埋头(椭圆形)内六角攻丝螺钉(Hexalobular socket raised countersunk (oval) head tapping screws.)
NF E25-654-2001平头内六角攻丝螺钉(Hexalobular socket pan head tapping screws.)
NF E25-655-1983内六角圆头自攻螺钉.符号RLX (ROUND HEAD TAPPING SCREWS WITH SIX LOBES RECESS. SYMBOL RLX .)
NF E25-656-1994十字槽沉头自攻螺钉(普通头型)(Cross recessed countersunk (flat) head tapping screws (common head style).)
NF E25-657-1994十字槽半沉头椭圆头自攻螺钉(Cross recessed raised countersunk (oval) head tapping screws.)
NF E25-658-1994十字槽平圆头自攻螺钉(Cross recessed pan head tapping screws.)
NF E25-659-1984自攻螺钉.十字槽半沉头.(`Poelier`).符号
RLZ
(TAPPING SCREWS. CROSS RECESSED MUSHROOM HEAD (“POELIER
“). SYMBOL RL Z.)
NF E25-664-1986一字槽六角头自攻螺钉.符号HS(HEXAGON SLOTTED HEAD TAPPING SCREWS. SYMBOL HS.)
NF E25-666-1987紧固件.自攻螺钉.Z形十字槽和一字槽平圆
头螺钉.符号CBL ZS
(FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTED
PAN HEAD. SYMBOL CBL ZS.)
NF E25-755-1997非硬度钢和奥斯特不锈钢的内螺纹平行螺钉(Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.)
NF E25-756-1997金属不锈钢和硬化钢的平行螺钉(Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).)
NF E25-757-1997非硬度钢和奥斯特不锈钢的内螺纹平行螺钉(Parallel pins with internal thread, of hardened steel and martensitic stainless steel.)
NF E25-800-1-1994紧固件.波纹钢管用螺栓.第1部分:带法兰或
不带法兰,带尖或不带尖的六角头螺钉.产品
等级A
(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 :
HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT
NIBS. PRODUCT GRADE A.)
NF E25-800-2-1994紧固件.波纹钢管用螺栓.第2部分:带尖或不
带尖的圆头螺钉.产品等级A
(FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 :
CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF E25-851-1987紧固件.滚制螺钉(ISO米制螺纹).特性(FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.)
NF E27-163-1972调整螺钉(ADJUSTING SCREW.)
NF E27-164-1976锁紧螺钉的垫板(LOCKING SCREW.)
NF E27-165-1976锁紧螺钉的穿销(SLIDE FOR LOCKING SCREW.)
NF E27-166-1976滚花头锁紧螺钉(LOCKING SCREW WITH KNURLED KNOB.)
NF E27-167-1976星形手扭锁紧螺钉(LOCKING SCREW WITH PALM KNOB.)
NF E27-168-1976四翼锁紧螺钉(LOCKING SCREW WITH 4 ARMED KNOB.)
NF E27-170-1974通用滚花头螺钉(GENERAL PURPOSE KNURLED THUMBS SCREWS.) NF E27-191-1983紧固件.有肩固定螺钉(FASTENERS. SHOULDERED RETAINING SCREWS.)
NF E27-214-1976带小提琴紧弦用的蝶形螺母锁紧螺钉(LOCKING SCREW WITH VIOLIN TYPE THUMB NUT.) NF E27-215-1976带六角螺母的锁紧螺钉(LOCKING SCREWS WITH HEXAGON NUT.)
NF E27-303-1968有孔球头螺钉(SPHERICAL HOLED HEAD SCREW.)
NF E27-853-1989通用金属卡箍.带型，无螺钉，不可重复使
用
(Metallic hose clamps for general purpose. Band type,
without screws, non re-usable. Specifications.)
NF E27-854-1982通用金属卡箍.带型,无螺钉,可重复使用的
销钉卡箍或轴的卡箍
(METAL-HOSE CLAMPS FOR GENERAL PURPOSES ; BAND TYPE,WITHOUT
SCREWS,RE-USABLE,PIN OR AXLE CLAMPS.)
NF E62-307-1977机床构造标准部件.多轴头.防护装置.２８
和３６卧式防护装置.支架.行程止推螺钉
(MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE
HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : STOP
SCREW.)
NF E62-519-2003柱形扁柄刀具用螺钉压紧刀具夹(立铣刀刀
夹).第1部分:刀柄驱动系统的尺寸
(Tool chucks (end mill holders) wirth clamp screws for
flatted cylindrical shank tool - Part 1 : dimensions of the
driving system of tool shanks.)
NF E62-520-2003柱形扁柄刀具用螺钉压紧刀具夹(立铣刀刀
夹).带7/24锥柄的夹头尺寸
(Tools chucks (end mill holders) wirth clamp screws for
flatted cylindrical shank tools - Dimensions of chucks with
7/24 taper shank.)
NF E62-526-2003带7/24外圆锥和莫氏内圆锥缩径套筒和连接
螺钉
(Reduction sleeves with 7/24 external and Morse internal
taper and incorporated screw.)
NF E63-512-1983铸型和挤压器材.金属模型构件.止动螺钉(MOULDING AND EXTRUSION EQUIPMENT. METALLIC MOULDING ELEMENTS. LOCKING SCREWS.)
NF E66-103-1993机用螺丝锥和手动螺丝锥(Short machine taps and hand taps.)
NF E66-107-2000公称直径由M3-M10的长杆螺丝攻.由回缩的
全直径杆型螺丝攻
(Long shank taps with nominal diameters from M3 to M10 -
Full-diameter shank taps with recess.)
NF E66-108-2000公称直径由M3-M24和1/8-1 英寸的长杆螺丝
攻.渐减型螺丝攻
(Long shank taps with nominal diameters from M3 to M24 and
1/8 in to 1 in - Reduced shank taps.)
NF E66-120-1975圆柱和锥形管螺纹手用螺丝锥(HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.)
NF E66-150-1990ＩＳＯ公制螺纹的手用和机用圆螺丝板牙(Hand- An machine-operated circular screwing dies and hand-operated die stocks.)
NF E66-153-1990煤气管道圆柱螺纹手用和机用圆螺丝板牙(Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.)
NF E74-303-2001螺钉和螺母组装工具.锻造的和管形套筒扳
手.头部外形最大尺寸
(Assembly tools for screws and nuts - Forged and tubular
socket wrenches - Maximum outside head dimensions.)
NF E74-304-2001螺钉和螺母装配工具.双头开口扳手、双头
环形扳手和多用扳手.端部最大宽度
(Assembly tools for screws and nuts - Double-headed open-
ended wrenches, double-headed ring wrenches and combination
wrenches - Maximum widths of heads.)
NF E74-305-2001螺钉和螺母装配工具.双头扳手.尺寸选配(Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.)
NF E74-307-2001螺钉和螺母用装配工具.组合扳手.扳手长度
和端口最大厚度
(Assembly tools for screws and nuts - Combination wrenches
- Lengths of wrenches and maximum thickness of heads.)
NF E74-310-2001螺钉和螺母用装配工具.工程用双头开口扳
手.扳手长度和端口厚度
(Assembly tools for screws and nuts - Double-headed open-
ended engineers' wrenches - Length of wrenches and
thickness of the heads.)
NF E74-311-2001螺钉和螺母用装配工具.双头平直套筒扳手
和斜口套筒扳手.扳手长度和端口厚度
(Assembly tools for screws and nuts - Double-headed, flat
and offset, box wrenches - Length of wrenches and thickness
of the heads.)
NF E74-313-2001螺钉和螺母用装配工具.双头深斜口套筒扳
手和改进的斜口套筒扳手.扳手长度和端口
厚度
(Assembly tools for screws and nuts - Double-headed, deep
offset and modified offset, box wrenches - Length of
wrenches and thickness of the heads.)
NF E74-321-1998螺钉和螺母用装配工具.十字形套筒扳手.尺
寸和扭矩试验
(ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET
WRENCHES. DIMENSIONS AND TORQUE TEST.)
NF E74-322-1972螺钉螺帽紧固工具.齿条式扳手(ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.)
NF E74-323-1972螺钉螺帽紧固工具.开槽螺帽用单钩扳手(ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES)
NF E74-324-2001螺钉和螺母用装配工具.可调扳手(Assembly tools for screws and nuts - Adjustable wrenches.)
NF E74-325-2003螺钉和螺母用装配工具.手动转矩工具.设计
一致性试验、质量一致性试验和重新校准程
序的要求和试验方法
(Assembly tools for screws and nuts - Hand torque tools -
Requirements and test methods for design conformance
testing, quality conformance testing and recalibration
procedure)
NF E74-331-2003螺钉和螺母用装配工具.内六角扳手(Assembly tools for screws and nuts - Hexagon socket screw keys.)
NF E74-351-2002螺钉和螺母用装配工具.一字槽头螺钉用旋
具.第2部分:手工操作旋具的一般要求、刀
刃长度和标记
(Assembly tools for screws and nuts - Screwdrivers for
slotted-head screws - Part 2 : general requirements,
lengths of blades and marking of hand-operated
screwdrivers)
NF E74-352-1998螺钉和螺母用装配工具.槽螺钉用旋具.第1
部分:手工及机械操作用的旋具头
(Assembly tools for screws and nuts. Screwdrivers for
slotted-head screws. Part 1 : tips for hand- and machine-
operated screwdrivers.)
NF E74-353-1-2002螺钉和螺母用装配工具.机动旋转头.第1部
分:一字槽螺钉旋具
(Assembly tools for screws and nuts - Machine-operated
screwdriver bits - Part 1 : screwdriver bits for slotted
head screws.)
NF E74-353-2-2002螺钉和螺母用装配工具.机动旋转头.第2部
分:十字槽螺钉旋具头
(Assembly tools for screws and nuts - Machine-operated
screwdrivers bits - Part 2 : screwdriver bits for cross-
recessed head screws.)
NF E74-353-3-2002螺钉和螺母用装配工具.机动旋转头.第3部
分:内六角螺钉用旋具头
(Assembly tools for screws and nuts - Machine-operated
screwdriver bits - Part 3 : screwdriver bits for hexagon
socket screws.)
NF E74-354-2002螺钉和螺母用装配工具.螺旋棘轮螺钉旋具
头.尺寸
(Assembly tools for screws and nuts - Spiral ratchet
screwdriver ends - Dimensions.)
NF E74-355-1993十字槽头螺钉用旋转具.第1部分:旋具尖(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.)
NF E74-356-1993十字槽头螺钉用旋具.第2部分:手持式旋具
的一般要求、旋具头长度和标记
(SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 2 :
GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF
HAND-OPERATED SCREWDRIVERS.)
NF E74-360-2001螺钉和螺母用装配工具.手动和机动螺丝刀
的驱动端和连接部件.尺寸和扭矩试验
(Assembly tools for screws and nuts - Drive ends for hand-
and machine-operated screwdriver bits and connecting parts
- Dimensions, torque testing.)
NF E74-360-2001螺钉和螺母用装配工具.手动和机动螺丝刀
的驱动端和连接部件.尺寸和扭矩试验
(Assembly tools for screws and nuts - Drive ends for hand-
and machine-operated screwdriver bits and connecting parts
- Dimensions, torque testing.)
NF E74-361-1997螺钉和螺母用装配工具.方形旋具.第1部分:
手动套筒工具用方形旋具
(Assembly tools for screws and nuts. Driving squares. Part
1 : driving squares for hand socket tools.)
NF E74-362-1997螺钉和螺母用装配工具.方形旋具.第2部分:
电动套筒工具用方形旋具
(Assembly tools for screws and nuts. Driving squares. Part
2 : driving squares for power socket tools.)
NF E74-363-1-1997螺钉和螺母用装配工具.方形传动套筒.第1
部分:手动套筒.尺寸
(Assembly tools for screws and nuts. Square drive sockets.
Part 1 : hand-operated sockets. Dimensions.)
NF E74-363-2-1997螺钉和螺母用装配工具.方形传动套筒.第2
部分:机动“冲击“套筒.尺寸
(Assembly tools for screws and nuts. Square drive sockets.
Part 2 : machine-operated sockets “impact“. Dimensions.)
NF E74-363-3-2001螺钉和螺母用组合工具.方形驱动套筒.第3
部分:机器驱动套筒(无冲击).尺寸
(Assembly tools for screws and nuts - Square drive sockets
- Part 3 : machine-operated sockets (“non impact“) -
Dimensions.)
NF E74-365-1997螺钉和螺母用装配工具.手动方形传动套筒
扳手上的传动件.尺寸和试验
(Assembly tools for screws and nuts. Driving parts for
hand-operated square drive socket wrenches. Dimensions and
tests.)
NF E74-366-1997螺钉和螺母用装配工具.手动方形传动套筒
扳手上的附件.尺寸和试验
(Assembly tools for screws and nuts. Attachments for hand-
operated square drive socket wrenches. Dimensions and
tests.)
NF E74-367-1995螺钉和螺母用装配工具.机动插头扳手的方
块传动加长六角插头
(Assembly tools for screws and nuts. Square drive extension
hexagon insert, for power socket wrenches.)
NF E74-381-1997螺钉和螺母用装配工具.技术规范.第1部分:
手动扳手和套筒
(Assembly tools for screws and nuts. Technical
specifications. Part 1 : hand-operated wrenches and
sockets.)
NF E82-020-1984模压锻造零件.拉紧装置用灯的螺钉.规范(DROP FORGINS. EYEBOLTS FOR TURNBUCKLES. REQUIREMENTS.)
NF F01-088-1971铁路运输设备.带有槽端头和螺纹端头的未
钻孔轴.头部钻孔的螺钉
(RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH SLOTTED
AND THREADED ENDS. SCREWS WITH DRILLED HEADS.)
NF F03-004-1983铁路车辆.金属螺钉. 沉头和半沉头. Ａ级.
符号Ｆ和ＦＢ
(Railway rolling stock. Grade A. Countersunk and raised
countersunk notched head machine screws. Symbols F and FB.)
NF F03-005-1983铁路车辆.金属螺钉. 圆柱头和球面圆柱头.
Ａ级. 符号Ｃ和ＣＲ
(Railway rolling stock. Grade A. Notched cheese head or
notched dome head machine screws. Symbols C and CR.)
NF F03-006-1983铁路车辆.开槽懦半沉头螺钉一螺母. Ａ级.
符号ＦＢＰ
(Railway rolling stock. Grade A. Slotted or notched raised
countersunk head screws nuts. Symbol FBP.)
NF F03-016-1983铁路车辆.开槽沉头螺钉, 螺母. Ａ级. Ｆ
Ｐ
(Railway rolling stock. Grade A. Slotted countersunk head
screws nuts. Symbol FP.)
NF F10-404-1984铁路车辆.0.25MN的联接螺钉(Railway transport equipment. Coupling screw of 0,25 mn.)
NF F11-003-1970铁路车辆.手制动. 螺钉和螺母. 螺距和螺
纹剖面. 螺钉传动
(RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS.
PITCHES AND PROFILES. SCREW DRIVES.)
NF F50-006-1998铁路固定设备.带可变螺纹的枕木螺丝(Railway fixed equipment. Sleeper screws with variable thread.)
NF F55-251-1991铁路固定设备.信号电路.连接和分段器材.
螺钉连接部件
(RAILWAY FIXED EQUIPMENT. SIGNALLING. CIRCUITS. CONNECTING
AND BREAKING COMPONENTS. SCREW-TYPE TERMINAL BLOCKS.)
NF F56-123-1980铁路固定设备.通讯和信号装置架空线路用
器材.直径口毫米镀锌方头木螺钉
(FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD
TELECOMMUNICATION AND SIGNALLING LINES. GALVANIZED SQUARE
HEAD WOOD SCREWS.)
NF J41-465-1957造船工业.“金士顿“阀门.螺钉零件(SHIPBUILDING. KINGSTON VALVES. BOLTS AND SCREWS.)
NF J46-126-1951造船工业.空气入口.手柄和紧固螺钉(SHIPBUILDING. VENTILATORS. HANDLE AND LOCKING SCREW.) NF L22-063-1970用板手操作的螺母、螺钉和轴的间隙(CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.)
NF L22-070-1976螺钉的BNAE型十字槽(CROSS RECESS (B.N.A.E.).)
NF L22-071-1976NFL ２２-０７０ 型螺钉十字槽用螺丝刀头(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)
NF L22-071-1976NFL ２２-０７０ 型螺钉十字槽用螺丝刀头(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)
NF L22-072-1991航天建筑.螺丝.920型十字槽(Aerospace construction. Bolts and screws. 92 degrees cruciform recess.)
NF L22-090-1966修配用大直径标准螺钉、销和垫圈(STANDARDIZED SCREWS,PINS AND WASHERS WITH INCREASED DIAMETER INTENDED FOR REPAIR WORK.)
NF L22-111-1975无销孔六角头螺钉.国际单位制螺纹(Hexagon head bolts without split pin hole. Sim thread (rech.).)
NF L22-112-1975带销孔六角头螺钉.国际单位制螺纹(Hexagon head bolts with split pin hole. Sim thread (rech.).)
NF L22-121-1975带轻杆无锁孔六角头螺钉.国际单位制螺纹(Hexagon head bolts with waisted shank without split pin hole. Sim thread (rech.).)
NF L22-122-1975带轻杆有销孔六角头螺钉.国际单位米制螺
纹
(Hexagon head bolts with waisted shank with split pin hole.
Sim thread.)
NF L22-125-1985六角头承拉螺钉ISO 螺纹４h 类(Bolt, hexagonal head, for tensile application, . ISO thread 4H class.)
NF L22-126-1985带锁紧孔六角头承拉螺钉.ISO螺纹４h 类(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4H class.)
NF L22-127-1985带颈杆六角头承拉螺钉.ISO螺 纹４h 类(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4H class.)
NF L22-128-1985带颈杆有锁紧孔六角头承拉螺钉.ISO 螺纹
４h 类
(Bolt, hexagonal head, necked shank, with locking hole, for
tensile application. ISO thread 4H class.)
NF L22-129-1985带销孔六角头承拉螺钉.ISO 螺纹４h 类(Bolt, hexagonal head, with split pin hole, for tensile application. ISO thread 4H class.)
NF L22-134-1975无销孔六角头槽制螺钉.国际单位制螺纹(Precision hexagon head bolts without split pin hole. Sim thread (rech.).)
NF L22-135-1975带销孔六角头槽制螺钉.国际单位制螺纹(Precision hexagon head bolts with split pin hole. Sim thread (rech.).)
NF L22-136-1984通用六角头螺钉短螺纹(Bolt, hexagonal head, current use, short thread.)
NF L22-137-1984带锁紧孔六角头短螺纹螺钉(Bolt, hexagonal head, with locking hole, short thread.) NF L22-138-1984精密六角头短螺纹螺钉(Bolt, hexagonal head, close tolerance, short thread.)
NF L22-139-1984带锁紧孔精密头角头短螺纹螺钉(BOLT,HEXAGONAL HEAD,CLOSE TOLERANCE,WITH LOCKING HOLE,SHORT THREAD.)
NF L22-140-1984六角头全螺纹螺钉(Bolt, hexagonal head, threaded to head.)
NF L22-141-1984有锁紧孔方角头全螺纹螺钉(Bolt, hexagonal head, with locking hole, threaded to head.)
NF L22-142-1984常用有销孔六角头螺钉(BOLT,HEXAGONAL HEAD,WITH COTTER PIN HOLE,CURRENT USE.)
NF L22-145-1985六角头承拉螺钉.ISO螺纹4G类(Bolt, hexagonal head, for tensile application, ISO thread 4G class.)
NF L22-146-1985有锁紧孔六角头承拉螺钉.ISO螺纹4G类(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4G class.)
NF L22-147-1985带颈杆六角头承拉螺钉.ISO螺纹4G类(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4G class.)
NF L22-148-1985带颈杆有销紧孔六角头承拉螺钉.ISO螺纹4G
类
(Bolts, hexagonal head, necked shank, with locking hole,
for tensile application. ISO thread 4G class.)
NF L22-151-1975开槽圆柱头螺钉和紧固凸圆头螺钉.国际单
位制螺纹
(Slotted and drilled cheese head screws. Sim thread
(rech.).)
NF L22-152-1975开槽扁头螺钉.国际单位米制螺纹(Slotted mushroom head screws. Sim thread (rech.).)
NF L22-153-197590°埋头开槽螺钉.国际单位米制螺纹(Slotted 90 degrees countersunk head screws. Sim thread (rech.).)
NF L22-154-1975120°半圆头开槽埋头螺钉.单际单位米制螺
纹
(Slotted raised 120 degrees countersunk head screws. Sim
thread (rech.).)
NF L22-156-1975锥顶凸圆头开槽螺钉.国际单位米制螺纹(Slotted raised cheese head screws with cone point. Sim thread (rech.).)
NF L22-157-1975锥顶扁头开槽螺钉.国际单位米制螺纹(Slotted mushroom head screws with cone point. Sim thread (rech.).)
NF L22-158-1975锥顶90°埋头开槽螺钉.国际单位米制螺纹(Slotted 90 degrees countersunk head screws with cone point. Sim thread (rech.).)
NF L22-159-1975锥顶120°半圆头开槽埋头螺钉.国际单位米
制螺纹
(Slotted raised 120 degrees countersunk head screws with
cone point. Sim thread (rech.).)
NF L22-161-1984有NF L22-72十字槽的通用100°埋头螺钉(Bolt, 100 degrees countersunk head, current use, nf L 22-072 cross recess.)
NF L22-162-1984有NF L22-072十字槽的精密100°全螺纹埋
头螺钉
(Bolt, 100 degrees countersunk head, close tolerance, nf L
22-072 cross recess.)
NF L22-163-1984有NF L22-072十字槽的常用100°度全螺纹
埋头螺钉
(Bolt, 100 degrees countersunk head, threaded to head, nf L
22-072 cross recess.)
NF L22-167-1984有NF L22-070十字槽的常用100°埋头螺钉(Bolt, 100 degrees countersunk head, current use, nf L 22-070 cross recess.)
NF L22-168-1984有NF L22-070 十字槽的紧公差100°沉头螺
钉
(BOLT,100 DEGREES COUNTERSUNK HEAD,CLOSE TOLERANCE,NF L 22-
070,CROSS RECESS.)
NF L22-169-1984有 NF L22-070十字槽的100°全螺纹埋头螺
钉
(BOLT,100 DEGREES COUNTERSUNK HEAD,THREADED TO HEAD,NF L
22-070,CROSS RECESS.)
NF L22-171-1984有NF L22-072十字槽的常用半圆头螺钉(Bolt, pan head, current use, nf L22-072 cross recess.) NF L22-173-1984有NF L22-072十字槽全螺纹半圆头螺钉(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-072 CROSS RECESS.)
NF L22-176-1984有NF L22-072十字槽锥顶半圆头非磁性螺钉(Bolt, pan head, amagnetic with cone point NF L 22-072 cross recess.)
NF L22-177-1984有NF L22-070十字槽常用半圆头螺钉(Bolt, pan head, current use, nf L 22-070 cross recess.) NF L22-179-1984有NF L22-070十字槽全螺纹半圆头螺钉(BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-070 CROSS RECESS.)
NF L22-181-1976有BNAE十字槽扁头螺钉.国际单位米制螺纹(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
NF L22-182-1976有BNAE十字槽90°埋头螺钉.国际单位米制
螺纹
(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS
RECESS. SIM THREAD.)
NF L22-183-1976有BNAE十字槽90°埋头螺钉.国际单位米制
螺纹
(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E.
CROSS RECESS. SIM THREAD.)
NF L22-184-1976有BNAE十字槽120°埋头螺钉.国际单位米制
螺纹
(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS
RECESS. SIM THREAD.)
NF L22-186-1976有BNAE十字槽锥顶扁头螺钉.国际单位米制
螺纹
(MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE
POINT. SIM THREAD.)
NF L22-187-1976有BNAE十字槽锥顶90°埋头螺钉.国际单位
米制螺纹
(90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS
RECESS AND CONE POINT. SIM THREAD.)
NF L22-188-1976有BNAE十字槽锥顶120°埋头半圆头螺钉单
国际单位制米螺纹
(RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E.
CROSS RECESS AND CONE POINT. SIM THREAD.)
NF L22-189-1976有BNAE十字槽锥顶120°埋头螺钉.国际单位
米制螺纹
(120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS
RECESS AND CONE POINT. SIM THREAD.)
NF L22-201-1984短螺纹精密螺钉.六角头.ISO螺纹(Bolt, hexagonal head, short thread, close tolerance. ISO thread.)。