HSD070IDW1-A(20080304)_promotion material
TENMA 72-8000 Series DC Power Supply Instruction M
72-8000 Series DC Power Supply Instruction ManualIntroductionThank you for purchasing our product.In order to ensure correct installation, operation and optimum performance of this product please read this manual in detail and keep for future reference.This instrument is produced under strict quality control. All parts go through screening and ageing, and a series of performance testing, environmental testing and safety testing. In order to guarantee safe use, and the best working performance, working environment guidelines must be followed.Contents1. Summary (3)2. Specifications (3)3. Applications (6)4. Description of panel (6)5. Applications (7)1.Summary72-8000 is a series of general DC power supplies suitable for laboratory use.Both CH1 and CH2 may work in CV or CC mode, and these two modes convert automatically according to the load. CH1 and CH2 have auto tracking function. In this condition, the output of CH2 tracks the output of CH1. This function is usually used when adjustable symmetrical and double polarity power is required. Both CH1 and CH2 display the output voltage or current with a 3-digit-LED meter.CH3 is a 5V fixed output. Its maximum output current is 2A, and it is usually used in TTL circuits etc.CH1, CH2 and CH3 all have overload protection.2.SpecificationsOutput Voltage and Current:Model CH1, CH2VoltageCH3VoltageCH1, CH2CurrentCH3Current72-8690 0V – 32V / 0A – 3A / 72-8695 0V – 32V 5V 0A – 3A 2A 72-8700 0V – 32V / 0A – 5A /CH1 and CH2Load Regulation: CV: ≤1X10-4 +2mV; CC≤20mA Ripple and Noise: CV: ≤1mVrms; CC: ≤1mVrms Adjustable Resolution: CV: ≤20mV (typical)CC: ≤50mA (typical)Interactive Regulation: CV: 5X10-5 +1mVCC: <0.5mATracking Error: 5X10-3 +2mVCH3Output Voltage: 5VOutput Current: 0-2ARipple and Noise: ≤3mVrmsAmbient Temperature Range:Operating: 0°C - 40°CStoring: +5°C - +45°CPower Source: AC220V±10%，50Hz±4%Dimensions (H x W x D): 152mm x 197mm x 305mmWeight: Approx. 9.5kgMTBF: ≥2000hAccessoriesCheck the meter for any damage or exposed metal parts. Packaging should include the following accessory items - if any differences or damage, please contact the nearby sales offices:∙ Power cord 1 pcs∙ Instruction manual 1 pcs1.Description of Panel1) Voltage meter2) Current meter3) VOLTS: Adjusts the output voltage at CV mode4) CURRENT: Adjusts the output current at CC mode5) MODE: Controls two main channels. Works in FREEmode or TRACK mode.6) MEASURE: Selects the digital meter’s display, the outputvoltage or the output current7) Ground of instrument8) Output terminal of CH19) Output terminal of CH210) Output terminal of CH311) POWER: Push in to turn on the power.2.ApplicationsThe left area of panel corresponds to CH1 and the right area of panel corresponds to CH2. When the left MEASURE is pushed out, the CV lamp switches on, and the left digital meter displays the output voltage of CH1. When this button is pushed in, the CC lamp switches on, and the left digital meter displays the output current of CH1. CH2 is same as CH1.When the MODE button is pushed out, each CH1 and CH2 works independently. When this button is pushed in, CH2 tracks to CH1.The output of CH1 and CH2 are suspended. You can set the negative level of output by connecting the reference point to the “-”terminal.Each CH1 and CH2 can output from:0V to 32V and from 0V to 3A (adjustable)0V to 64V and from 0A to 3A current (adjustable in series)0V to 32V and from 0A to 6A (adjustable in parallel)The “-”terminal of III channel has been connected to the ground.A protective grounding connection is essential for safe operation. This is helpful to reduce the ripper and also the 50Hz noise.**END**Operating Manual content is subject to change without notice!Tenma405 S. Pioneer Blvd,Springboro, Ohio 45066-3001Phone: 1-888-655-5409Fax: 1-800-765-6960。
马格тро尔HD系列粒子动力学仪器说明书
Fig.1 : HD-700 Series Hysteresis DynamometerProvided by: (800)404-ATECAdvanced Test Equipment Corp .®Rentals • Sales • Calibration • ServicePage 2 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.ED DESCRIPTIONWith Magtrol’s Engine Dynamometers, high performance motor testing is available to manufacturers and users of small engines. Magtrol’s Engine Dynamometers have been designed to address the severe, high vibration conditions inherent in internal combustion engine testing.Magtrol’s Engine Dynamometers are highly accurate (± 0.25% of full scale) and can be controlled either manually or via a PC based Controller. For a small engine test stand, Magtrol offers a full line of controllers, readouts and software.As with all Magtrol Hysteresis Dynamometers, engine loading is provided by Magtrol’s Hysteresis Brake, which provides: torque independent of speed, including full load at 0 rpm; excellent repeatability; frictionless torque with no wearing parts (other than bearings); and long operating life with low maintenance.ED APPLICATIONSThe Engine Dynamometers are ideally suited for emissions testing as set forth in CARB and EPA Clean Air Regulations. The Dynamometers will offer superior performance on the production line, at incoming inspection or in the R&D lab.OPERATING PRINCIPLESAIR GAPFIELD COILBALL BEARINGSSHAFTPOLE STRUCTUREHUBROTOR (Drag Cup)Magtrol Hysteresis Dynamometers absorb power with a unique Hysteresis Braking System which provides frictionless torque loading independent of shaft speed. The Hysteresis Brake provides torque by the use of two basic components—a reticulated pole structure and a specialty steel rotor/shaft assembly—fitted together but not in physical contact. Until the pole structure is energized, the drag cup can spin freely on its shaft bearings. When a magnetizing force from the field coil is applied to the pole structure, the air gap becomes a flux field and the rotor is magnetically restrained, providing a braking action between the pole structure and rotor.DYNAMOMETER SELECTIONMagtrol’s Hysteresis Dynamometers cover a wide range of Torque, Speed and Mechanical Power ratings. To select the appropriate size Dynamometer for your motor testing needs, you will need to determine the Maximum Torque, Speed and Power applied to the Dynamometer.MAXIMUM TORQUEThe Magtrol Hysteresis Absorption Dynamometer will develop braking torque at any speed point, including low speed and stall conditions (“0” rpm). It is important to consider all torque points that are to be tested, not only rated torque, but also locked rotor and breakdown torque. Dynamometer selection should initially be based on the maximum torque requirement, subject to determining the maximum power requirements.MAXIMUM SPEEDThis rating is to be considered independent of torque and power requirements, and is the maximum speed at which the Dynamometer can be safely run under free-run or lightly loaded conditions. It is not to be considered as the maximum speed at which full braking torque can be applied.MAXIMUM POWER RATINGSThese ratings represent the maximum capability of the Dynamometer Braking System to absorb and dissipate heat generated when applying a braking load to the motor under test. The power absorbed and the heat generated by the Dynamometer is a function of the Torque (T) applied to the motor under test, and the resulting Speed (n) of the motor. This is expressed in these power (P) formulas:SI:P (watts) = T (N·m) × n (rpm) × (1.047 × 10-1)English: P (watts) = T (lb·in) × n (rpm) × (1.183 × 10-2)Metric: P (watts) = T (kg·cm) × n (rpm) × (1.027 × 10-2)All of Magtrol’s controllers, readouts and software calculate horsepower as defined by 1 hp = 550 lb·ft / s. Using this definition:hp = P (watts) / 745.7The Dynamometer’s ability to dissipate heat is a function of how long a load will be applied. For this reason, the maximum power ratings given are based on continuous operation under load, as well as a maximum of 5 minutes under load.To safely dissipate heat and avoid Dynamometer failure, the maximum power rating is the most important consideration in selecting a Dynamometer.DATASHEET Page 3 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without PLETE PC CONTROLMagtrol’s M-TEST 7 Software is a state-of-the-art motor testing program for Windows®-based data acquisition. Used with a Magtrol Programmable Dynamometer Controller, Magtrol M-TEST 7 Software provides the control of any Magtrol Dynamometer and runs test sequences in a manner best suited to the overall accuracy and efficiency of the Magtrol Motor T est System. The data that is generated by Magtrol’s Motor T esting Software can be stored, displayed and printed in tabular or graphic formats, and can be easily imported into a spreadsheet.Written in LabVIEW™, M-TEST 7 has the flexibility to test a majority of motor types in a variety of ways. Because of LabVIEW’s versatility, obtaining data from other sources (e.g. thermocouples), controlling motor power and providing audio/visual indicators is relatively easy.Magtrol’s M-TEST 7 Software is ideal for simulating loads, cycling the unit under test and motor ramping. Because it is easy to gather data and duplicate tests, the software is ideal for use in engineering labs. T ests can be programmed to run on their own and saved for future use allowing for valuable time savings in production testing and incoming/outgoing inspection.SPECIFICATIONSMODELTORQUE MEASURE UNIT CODE a)MAXIMUMTORQUERANGEDRAG TORQUEDE-ENERGIZED AT1,000 RPMNOMINAL INPUT INERTIA MAX. POWER RATINGS MAXIMUM SPEED c)BRAKE COOLING METHOD5 MINUTECONTINUOUS b)lb·ft·s 2kg·m 2WWRPMN·mED-7155N 6.200.035 N·m 1.27 × 10-3 1.72 × 10-3 3 400 3 00025 000Blower (included)ED-8155N28.00.14 N·m9.61 × 10-31.30 × 10-27 0006 00012 000Blower (included)a) All -5N(A) dynamometers are 5 Volt Output. Contact Magtrol for 6N (English), 7N (Metric) and 8N (SI) Specifications.b) Note: Operating at the continuous power rating for periods of up to 4 hours is acceptable. However, operating for extended periods at high temperatures willresult in premature component and bearing failure. Limiting the length of the cycle and the component temperatures will guard against premature failure. Where continuous duty is desired for longer time intervals, component temperatures should be maintained less than 100°C; monitoring the outside brake surface temperature is a sufficient reference.c) The maximum speed will depend on what type of keyway (if any) is used on the shaft. Unless specified, the dynamometer shaft will be made without a keyway.DATASHEET Page 4 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.a) All -5N(A) dynamometers are 5 Volt Output. Contact Magtrol for 6N (English), 7N (Metric) and 8N (SI) Specifications.b) Note: Operating at the continuous power rating for periods of up to 4 hours is acceptable. However, operating for extended periods at high temperatures willresult in premature component and bearing failure. Limiting the length of the cycle and the component temperatures will guard against premature failure. Where continuous duty is desired for longer time intervals, component temperatures should be maintained less than 100°C; monitoring the outside brake surface temperature is a sufficient reference.c) Requires air cooling provided by user. Regulator and filter package is provided as standard equipment on these units.MODELTORQUE MEASURE UNITCODE a)MAXIMUMTORQUERANGEDRAG TORQUEDE-ENERGIZEDAT 1,000 RPMNOMINAL INPUT INERTIAMAX. POWER RATINGS MAXIMUM SPEEDBRAKE COOLING METHOD5 MINUTE CONTINUOUS b)lb·ft·s 2kg·m 2WWRPMN·mSTANDARDHIGHSPEEDHD-1065N 0.0180.056 mN·m 7.04 × 10-79.54 × 10-735730 00050 000Convection HD-1005N 0.080.64 mN·m 3.40 × 10-6 4.61 × 10-6752025 00040 000Convection HD-4005N 0.28 2 mN·m 1.55 × 10-5 2.10 × 10-52005525 00040 000Convection HD-5005N 0.85 5 mN·m 8.05 × 10-5 1.09 × 10-44008025 00040 000Convection HD-5105N 0.85 5 mN·m 8.05 × 10-5 1.09 × 10-475037525 00040 000CompressedAir c) (7 CFM @ 1.75 PSI)HD-5055N 1.7010 mN·m 1.61 × 10-4 2.18 × 10-480016025 00040 000Convection HD-5155N1.7010 mN·m1.61 × 10-42.18 × 10-41 50090025 00040 000CompressedAir c)(10 CFM @ 4 PSI)HD-7005N 3.100.013 N·m 5.51 × 10-47.47 × 10-470015025 00035 000Convection HD-7105N 3.100.013 N·m 5.51 × 10-47.47 × 10-4 1 50093525 00035 000Blower (included)HD-7055N 6.200.023 N·m 1.10 × 10-3 1.49 × 10-3 1 40030025 00035 000Convection HD-7155N6.200.023 N·m 1.10 × 10-31.49 × 10-33 4003 00025 00035 000Blower (included)HD-8005N 14.000.10 N·m4.43 × 10-3 6.01 × 10-3 2 800 1 80012 000N/ACompressedAir c)(13 CFM @ 10 PSI)HD-8105N 14.000.10 N·m4.43 × 10-3 6.01 × 10-3 3 500 3 00012 00015 000Blower (included)HD-8055N 28.000.14 N·m8.81 × 10-3 1.19 × 10-2 5 300 3 00012 000N/ACompressedAir c)(15 CFM @ 14 PSI)HD-8155N 28.000.14 N·m 8.81 × 10-3 1.19 × 10-27 000 6 00012 00015 000Blower (included)HD-8255N56.500.40 N·m1.85 × 10-22.51 × 10-214 00012 0008 00010 000Blower (included)DATASHEET Page 5 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.MODELVOLTAGEVASTYLERATINGHD-1XX-XN 120 V 30UL/CSA 300 mA 250 V SB HD-1XX-XNA 240 V 30IEC 125 mA 250 V T HD-4XX-XN 120 V 30UL/CSA 300 mA 250 V SB HD-4XX-XNA 240 V 30IEC 125 mA 250 V T HD-5XX-XN 120 V 30UL/CSA 300 mA 250 V SB HD-5XX-XNA 240 V 30IEC 125 mA 250 V T HD-800-XN 120 V 65UL/CSA 800 mA 250 V SB HD-800-XNA 240 V 65IEC 315 mA 250 V T HD-810-XN 120 V 65UL/CSA 800 mA 250 V SB HD-810-XNA 240 V 65IEC 315 mA 250 V T HD-805-XN 120 V 130UL/CSA 1.25 A 250 V SB HD-805-XNA 240 V 130IEC 630 mA 250 V T HD/ED-815-XN 120 V 130UL/CSA 1.25 A250 V SB HD/ED-815-XNA 240 V 130IEC 630 mA 250 V THD-825-XN 120 V N/A N/A N/A HD-825-XNA240 VN/AN/AN/AAllow approximately 6 in to 8 in (152 mm to 203 mm) between rear of dynamometer base plate and blower for connection hardware. Required hardware is supplied with the dynamometer.BL-002 Blower has two filter elements.120 VAC 60 HzØ A ECB DFGAir FilterDyno. Brake Air OutletOn/Off SwitchBLOWER DIMENSIONSMODELBL-001BL-002inmmin mmØ A 71787178B 1127911279C 1025410254D 820315381E 41024102F 820312305G 125125Weight8.5 lb3.9 kg18 lb8.1 kg▪Models HD-710, HD-715, HD-810 and ED-715 include the BL-001 blower.▪Models HD-815 and ED-815 include the BL-002 blower. ▪Model HD-825 uses two BL-002 blowers for cooling its two brake sets.BLOWER POWER AND FUSESMODELVOLTAGEVASTYLERATINGBL-001120 V 600UL/CSA 6.3 A 250 V SB BL-001A 240 V 500IEC 3.15 A 250 V T BL-002120 V 1,000UL/CSA 15 A 250 V SB BL-002A240 V1,000IEC6.3A250 VTDATASHEET Page 6 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.NOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.HD-100/400/500 SERIES WITH LONG BASE PLATEEAHJØNM FCGL DQP ØBSHAFT END DET AIL (2:1)(FLAT)MODEL UNITS AØ BC D E F G H JL a)M a)Ø NP Q WEIGHTHD-106in 0.500.1245/0.1247 3.5179.38100.5 6.38.515.58.50.370.0150.37512.0 lb mm 12.7 3.162/3.16788.9432238.325412.71592163942169.40.389.53 5.4 kg HD-100in 0.750.1870/0.1872 3.5179.13100.5 6.38.515.58.50.370.0250.37512.5 lb mm 19.1 4.750/4.75588.9432231.925412.71592163942169.40.649.53 5.7 kg HD-400in 0.670.2495/0.2497 3.5179.13100.5 6.38.515.58.50.370.030.43815.0 lb mm 17.0 6.337/6.34288.9432231.925412.71592163942169.40.7611.13 6.8 kg HD-500in 0.880.3745/0.3750 4.0179.13100.5 6.38.515.58.50.370.0470.37516.0 lb mm 22.29.512/9.525101.6432231.925412.71592163942169.4 1.199.537.3 kg HD-510in 0.880.3745/0.3750 4.0179.13100.5 6.38.515.58.50.37N/A16.0 lb mm 22.29.512/9.525101.6432231.925412.71592163942169.47.3 kg HD-505in 0.880.3745/0.3750 4.0209.64100.5 6.38.518.58.50.370.050.37518.0 lb mm 22.29.512/9.525101.6508244.925412.71592164702169.4 1.279.538.1 kg HD-515in 0.880.3745/0.37504.0209.64100.56.38.518.58.50.37N/A18.0 lb mm22.29.512/9.525101.6508244.925412.71592164702169.48.1 kga) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.* Shaft Flats are not available on high speed models.DATASHEET Page 7 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.AHJM FCGL DØNEQP ØBSHAFT END DET AIL (2:1)(FLAT)MODELUNITSAØ BCDEFGHJL a)M a)Ø NPQWEIGHTHD-106in 0.500.1245/0.1247 3.57.00.33110.5 6.38.5 6.09.840.350.0150.3757.5 lb mm 12.7 3.162/3.16788.9177.88.4279.412.7159216152.425090.389.53 3.4 kg HD-100in 0.750.1870/0.1872 3.57.00.08110.5 6.38.5 6.09.840.350.0250.3758.0 lb mm 19.1 4.750/4.75588.9177.8 2.1279.412.7159216152.425090.649.53 3.6 kg HD-400in 0.670.2495/0.2497 3.57.00.08110.5 6.38.5 6.09.840.350.030.43811.0 lb mm 17.0 6.337/6.34288.9177.8 2.1279.412.7159216152.425090.7611.13 5.0 kg HD-500in 0.880.3745/0.3750 4.07.00.08110.5 6.38.5 6.09.840.350.0470.37512.0 lb mm 22.29.512/9.525101.6177.8 2.1279.412.7159216152.42509 1.199.535.4 kg HD-510in 0.880.3745/0.3750 4.08.00.13110.56.38.57.09.840.35N/A12.5 lb mm 22.29.512/9.525101.6203.2 3.2279.412.7159216177.82509 5.7 kg HD-505in 0.880.3745/0.3750 4.09.50.10110.5 6.38.58.59.840.350.050.37513.0 lb mm 22.29.512/9.525101.6241.3 2.6279.412.7159216215.92509 1.279.535.9 kg HD-515in 0.880.3745/0.37504.010.250.10110.56.38.59.259.840.35N/A13.0 lb mm22.29.512/9.525101.6260.42.6279.412.7159216234.925095.9 kgNOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.HD-100/400/500 SERIES WITH SHORT BASE PLATEa) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.* Shaft Flats are not available on high speed models.DATASHEET Page 8 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.NOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.HD-700 SERIES WITH LONG BASE PLATEEAHJM FCØNGL DQP ØBSHAFT END DET AIL (2:1)(FLAT)MODEL UNITS AØ BC D E F G H JL a)M a)Ø NP Q WEIGHTHD-700in 1.250.4995/0.4999 5.8752412.75110.6259.51022.5723.90.3750.060.6339 lb mm 31.812.687/12.692149.2609.6323.9279.415.9241.3254571.5241.39.5 1.615.917.63 kg HD-710in 1.250.4995/0.4999 5.8752613.59110.6259.51024.59.50.375N/A 45 lb mm 31.812.687/12.692149.2660.4345.2279.415.9241.3254622.3241.39.520.30 kg HD-705in 1.250.4995/0.4999 5.8752813.62110.6259.51026.59.50.3750.060.6352 lb mm 31.812.687/12.692149.2711.2346.0279.415.9241.3254673.1241.39.5 1.615.923.50 kg HD-715in 1.250.4995/0.4999 5.8753014.29110.6259.51028.59.50.375N/A59 lb mm31.812.687/12.692149.2762.0363.0279.415.9241.3254723.9241.39.526.60 kgHD-700 SERIES WITH SHORT BASE PLATEEAHJM FCØNGLDQP ØBSHAFT END DET AIL (2:1)(FLA T)a) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.* Shaft Flats are not available on high speed models.a) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.* Shaft Flats are not available on high speed models.MODEL UNITS AØ BC D E F G H JL a)M a)Ø NP Q WEIGHTHD-700in 1.250.4995/0.4999 5.87511.340.09110.6259.5109.849.840.3750.060.6330 lb mm 31.812.687/12.692149.2288.0 2.2279.415.9241.3254250.02509.5 1.615.913.6 kg HD-710in 1.250.4995/0.4999 5.87512.500.09110.6259.51011.009.840.375N/A 36 lb mm 31.812.687/12.692149.2317.5 2.2279.415.9241.3254279.52509.516.3 kg HD-705in 1.250.4995/0.4999 5.87514.450.09110.6259.51012.959.840.3750.060.6343 lb mm 31.812.687/12.692149.2367.0 2.2279.415.9241.3254329.02509.5 1.615.919.5 kg HD-715in 1.250.4995/0.4999 5.87515.750.09110.6259.51014.259.840.375N/A50 lb mm31.812.687/12.692149.2400.02.2279.415.9241.3254362.02509.522.7 kgDATASHEET Page 9 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.NOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.ED-SERIES ENGINE DYNAMOMETERSMODEL UNITS AØ BC D E F G HL a)M a)Ø NP Q R WEIGHTED-715in 1.720.7490/0.7495 6.8716.0018.1311.00 1.0010.5014.509.500.370.64 1.000.18775 lb mm 43.719.025/19.037174.5406.4460.5279.425.4266.7368.3241.39.416.3525.4 4.8334 kg ED-815in 3.02 1.4995/1.500011.0023.0023.2717.00 2.0016.6320.8015.005/8-11 1.287 2.000.375285 lb mm76.738.087/38.100279.4584.2591.1431.850.8422.4528.3381.0THD32.750.89.53129.3 kga) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.CBAH M FØNGL D EQP ØBRSHAFT END DET AIL (2:1)(SQUARE KEY)HD-800 SERIES WITH LONG BASE PLATEEAHJØNM FCGLDKØBNOTE: For detailed dimension drawings of dynamometers with the T-slot base plate option, visit Magtrol’s Web site.MODEL UNITS AØ BC D E F G H JL a)M a)Ø NWEIGHTHD-800in 2.130.9995/1.0000938.523.8117214.61436.5150.53237.0 lb mm 5425.387/25.400228.697860543250.837135692738113.5107.2 kg HD-810in 2.050.9995/1.0000938.523.0917214.61436.5150.53233.0 lb mm 5225.387/25.400228.697858743250.837135692738113.5105.3 kg HD-805in 2.130.9995/1.0000938.520.5717214.61436.5150.54287.0 lb mm 5425.387/25.400228.697852243250.837135692738113.7129.7 kg HD-815in 2.120.9995/1.0000938.518.1917214.61436.5150.54288.0 lb mm5425.387/25.400228.697846243250.837135692738113.7130.1 kga) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.DATASHEET Page 10 / 18© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.NOTE: Original dimensions are in English units. Dimensions converted to Metric units have been rounded and are for reference only.HD-800 SERIES WITH SHORT BASE PLATESE AHJØNM FCGL DKØBa) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.An HD-825 Dynamometer with long base plate is available if ordered with the accompanying dynamometer table (TAB 0825L). Contact Magtrol for details.MODEL UNITSAØ BCDEFGHJL a)M a)Ø NPQRSTWEIGHTHD-825in 2.83 1.4995/1.50001138.538.9317216.61436.5150.54 1.28720.37621400.0 lb mm7238.087/38.100279.497898943250.842235692738113.732.6950.89.5350.825.4181.4 kga) T hese dimensions represent the distance between mounting holes. There are four (4) mounting holes on each base plate.MODEL UNITS AØ BC D E F G H JL a)M a)Ø NWEIGHTHD-800in 2.130.9995/1.0000917.25 2.5617214.61413.7815.750.35168.0 lb mm 5425.387/25.400228.64386543250.8371356350400976.2 kg HD-810in 2.050.9995/1.0000918.00 2.5917214.61414.0615.750.35164.0 lb mm 5225.387/25.400228.64576643250.8371356357400974.4 kg HD-805in 2.130.9995/1.0000920.50 2.5717214.61415.7515.750.35228.0 lb mm 5425.387/25.400228.65206543250.83713564004009103.4 kg HD-815in 2.120.9995/1.0000923.00 2.5917214.61419.0915.750.35236.0 lb mm5425.387/25.400228.65846643250.83713564854009107.0 kgQP ØBRNSHAFT END DET AIL (2:1)(SQUARE KEY)LDEAC STMFH GJØNMaximum Rated Speed for DynamometerMaximum KineticPower Rating Curve for Continuous Duty: Area under curve equals the maximum speed and torque combinations for a continuous duty motor test.10,00020,00030,00040,0000.0000.0020.0040.0060.0080.0100.0120.0140.0160.018S P E E D (r p m )TORQUE (Nm)HD-106, Power Absorbtion CurveMaximum Kinetic Power Rating Curve for Less Than Five Minutes: Area under curve equals themaximum speed and torque combinations for a motor test of less than five minutes.Maximum Torquefor DynamometerHD-106HD-106 HIGH SPEED HD-100HD-100 HIGH SPEEDHD-400HD-400 HIGH SPEED10,00020,00030,00040,00050,00060,0000.0000.0020.0040.0060.0080.0100.0120.0140.0160.018S P E E D (r p m )TORQUE (Nm)HD-106-HS, Power Absorbtion CurveThe power absorption curves represent the maximum power (heat) that the dynamometer can dissipate over time.5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.0100.0200.0300.0400.0500.0600.0700.080S P E E D (r p m )TORQUE (Nm)HD-100-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.0500.1000.1500.2000.250S P E E D (r p m )TORQUE (Nm)HD-400-HS, Power Absorbtion Curve10,00020,00030,00040,0000.0000.0020.0040.0060.0080.0100.0120.0140.0160.018S P E E D (r p m )TORQUE (Nm)HD-106, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.0100.0200.0300.0400.0500.0600.0700.080S P E E D (r p m )TORQUE (Nm)HD-100, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.0500.1000.1500.2000.250S P E E D (r p m )TORQUE (Nm)HD-400, Power Absorbtion CurveHD-500HD-500 HIGH SPEED HD-510HD-510 HIGH SPEEDHD-505HD-505 HIGH SPEEDHD-515HD-515 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.1000.2000.3000.4000.5000.6000.7000.800S P E E D (r p m )TORQUE (Nm)HD-500-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.1000.2000.3000.4000.5000.6000.7000.800S P E E D (r p m )TORQUE (Nm)HD-510-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.2500.5000.750 1.000 1.250 1.500S P E E D (r p m )TORQUE (Nm)HD-505-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,00035,00040,00045,0000.0000.2500.5000.750 1.000 1.250 1.500S P E E D (r p m )TORQUE (Nm)HD-515-HS, Power Absorbtion CurveThe power absorption curves represent the maximum power (heat) that the dynamometer can dissipate over time.5,00010,00015,00020,00025,00030,0000.0000.1000.2000.3000.4000.5000.6000.7000.800S P E E D (r p m )TORQUE (Nm)HD-500, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.1000.2000.3000.4000.5000.6000.7000.800S P E E D (r p m )TORQUE (Nm)HD-510, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.2500.5000.7501.0001.2501.500S P E E D (r p m )TORQUE (Nm)HD-505, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.2500.5000.7501.0001.2501.500S P E E D (r p m )TORQUE (Nm)HD-515, Power Absorbtion CurveThe power absorption curves represent the maximum power (heat) that the dynamometer can dissipate over time.HD-700HD-700 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,0000.0000.5001.0001.5002.0002.5003.000S P E E D (r p m )TORQUE (Nm)HD-700-HS, Power Absorbtion CurveHD-710HD-710 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,0000.0000.5001.0001.5002.0002.5003.000S P E E D (r p m )TORQUE (Nm)HD-710-HS, Power Absorbtion CurveHD-705HD-705 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,0000.0001.0002.0003.0004.0005.0006.000S P E E D (r p m )TORQUE (Nm)HD-705-HS, Power Absorbtion CurveHD-715 AND ED-715HD-715 HIGH SPEED5,00010,00015,00020,00025,00030,00035,00040,0000.0001.0002.0003.0004.0005.0006.000S P E E D (r p m )TORQUE (Nm)HD-715-HS, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.5001.0001.5002.0002.5003.000S P E E D (r p m )TORQUE (Nm)HD-700, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0000.5001.0001.5002.0002.5003.000S P E E D (r p m )TORQUE (Nm)HD-710, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0001.0002.0003.0004.0005.0006.000S P E E D (r p m )TORQUE (Nm) HD-705, Power Absorbtion Curve5,00010,00015,00020,00025,00030,0000.0001.0002.0003.0004.0005.0006.000S P E E D (r p m )TORQUE (Nm) HD-715, Power Absorbtion CurveThe power absorption curves represent the maximum power (heat) that the dynamometer can dissipate over time.HD-800HD-8052,000 4,000 6,000 8,00010,00012,00014,00016,00018,0000.0002.0004.0006.0008.00010.00012.00014.000S P E E D (r p m )TORQUE (Nm)HD-810-HS, Power Absorbtion CurveHD-810HD-810 HIGH SPEEDHD-815 AND ED-815HD-815 HIGH SPEED2,000 4,000 6,000 8,00010,00012,00014,00016,00018,0000.0005.00010.00015.00020.00025.000S P E E D (r p m )TORQUE (Nm)HD-815-HS, Power Absorbtion CurveHD-825HD-825 HIGH SPEED2,000 4,000 6,000 8,00010,00012,0000.00010.00020.00030.00040.00050.000S P E E D (r p m )TORQUE (Nm)HD-825-HS, Power Absorbtion Curve2,000 4,000 6,000 8,00010,00012,00014,0000.0002.0004.0006.0008.00010.00012.00014.000S P E E D (r p m )TORQUE (Nm)HD-800, Power Absorbtion Curve2,000 4,000 6,000 8,00010,00012,00014,0000.0005.00010.00015.00020.00025.000S P E E D (r p m )TORQUE (Nm)HD-805, Power Absorbtion Curve2,000 4,000 6,000 8,00010,00012,00014,0000.0002.0004.0006.0008.00010.00012.00014.000S P E E D (r p m )TORQUE (Nm)HD-810, Power Absorbtion Curve2,000 4,000 6,000 8,00010,00012,00014,0000.0005.00010.00015.00020.00025.000S P E E D (r p m )TORQUE (Nm)HD-815, Power Absorbtion Curve1,000 2,000 3,000 4,000 5,000 6,000 7,0008,0009,0000.00010.00020.00030.00040.00050.000S P E E D (r p m )TORQUE (Nm) HD-825, Power Absorbtion Curve。
T-BERD 2207用户指南说明书
198150-15217-01Rev. DT-BERD 2207USER’S GUIDEThis manual applies to all T-BERD 2207 software incorporating software level 3.x.JANUARY 2000Copyright ©1998 TTC®USA 1-800-638-2049 • +1-301-353-1550 • FAX +1-301-353-0234Canada 1-888-689-2165 • +1-905-507-4117 • FAX +1-905-507-4126SECTION 9 - SpecificationsGeneral SpecificationsSECTION 9 SPECIFICATIONS9.1GENERAL SPECIFICATIONS9.1.1Physical Characteristics:Height:7.5" (19 cm)Width:11.5" (29.2 cm)Depth: 2.25" (5.7 cm)Weight: 4.25 lb. (1.93 kg.)9.1.2Environmental Characteristics:Temperature:Operating:32°F to 122°F (0°C to +50°C)Non-Operating:-40°F to 167°F (-40°C to +75°C)Humidity:10% to 90% Relative Humidity, non-condensing9.1.3Electrical Characteristics:Battery Type:10.8 V Nickel-Metal Hydride (NiMH)Operating Time:Typically, up to three hours of continuous operation on a full chargeRecharging Period:Maximum of two hours from full dischargeAC Adaptor:120VAC to 18 VDC 1.2A9.2DS1 SPECIFICATIONS9.2.1Input Specifications9.2.1.1RX JackConnector Type:Bantam jackFrequency:1,544,000 Hz ±5000 HzUser’s Guide T-BERD 22079-1SECTION 9 - SpecificationsDS1 SpecificationsImpedanceBRIDGE:1000 ohms minimumTERM:100 ohms ±5%DSX-MON:100 ohms ±5%RangeBRIDGE:+6 to -35.0 dBdsxTERM:+6 to -35.0 dBdsxDSX-MON:+6 to -24.0 dBdsx of resistive los9.2.1.2Loop Codes Detection CriteriaIn-Band:At least 177 error-free bits of the selected repetitive pattern must be received(loop up or loop down).Out-of-Band:Datalink monitored every 125 ms for loop codes (loop up and loop down).9.2.1.3Pattern Synchronization Detection CriteriaFixed Patterns:30 consecutive error-free bitsPseudo-random:30 + n consecutive error-free bits for a pattern length of 2^n-19.2.2Output Specifications9.2.2.1TX JackConnector Type:Bantam jackLBO Level:Line build-out of 0, -7.5, -15.0, and -22.5 dB of cable loss at 772 HzLBO Tolerance:±2 dB at 772 kHzTiming:±7 ppm internal or recoveredLine Codes:AMI or B8ZSError Insert Type:Logic, BP V, or FramePulse Shape:With output terminated in 100 ohms resistive load and 0 dB line build-outselected, the T-BERD 2207 meets ITU-T Recommendation G.703; AT&TPublications CB113, CB119, CB132, CB143, and PUB62508; and AT&TPUB62411 pulse shape specifications.9-2T-BERD 2207User’s GuideSECTION 9 - SpecificationsDS1 Specifications 9.2.2.2Transmitted Loop CodesIn-BandCSU:Loop-up: 10000; Loop-down: 100Facility 1:Loop-up: 1100; Loop-down: 1110Facility 2:Loop-up: 11000; Loop-down: 11100Facility 3:Loop-up: 100000; Loop-down: 100Out-of-BandLine:Loop up: 1111 1111 0111 0000Loop down: 1111 1111 0001 1100Payload:Loop up: 1111 1111 0010 1000Loop down: 1111 1111 0100 1100Network:Loop up: 1111 1111 0100 1000Loop down: 1111 1111 0010 01009.2.3Measurement SpecificationsFrequencyRange:1,544,000 ±5000 HzAccuracy:± 7 ppmResolution: 1 HzReceived LevelRange:+6 dBdsx to -40 dBdsxAccuracy:±1.0 dB between +6 and -10 dBdsx±2.0 dB between -10 and -20 dBdsx±3.0 dB between -20 and -40 dBdsxResolution:0.1 dBVp-p Range:60 mV to 12.0 VVp-p Resolution:0.05 VSimplex CurrentRange:10 mA to 180 mAccuracy:±5%Resolution: 1 mASimplex path:13.2 ohms (nominal)User’s Guide T-BERD 22079-3SECTION 9 - SpecificationsDS1 Specifications9.2.4Alarm CriteriaSignal Loss:175 ±75 consecutive zerosFrame LossD4: 2 out of 5 Ft bits in errorESF: 2 out of 5 frame bits in errorSLC-96: 2 out of 5 Ft bits in errorPattern Loss:100 errors detected in 1000 or fewer bitsOnes DensityQRSS:Alarm is suppressed.Other Patterns:Received data contains less than n ones in 8(n+1) bits, where n=1 to 23.Excess ZeroAMI:16 or more consecutive zerosB8ZS:8 or more consecutive zerosYellow AlarmD4:Bit 2 is a 0 for 255 consecutive channels.ESF:256 bits ±16 bits of a repetitive (1111 1111 0000 0000) pattern received inthe 4 kb/s datalink.SLC-96:Bit 2 is a 0 for 255 consecutive channels.AIS:Unframed T1 signal has 2048 consecutive ones.Low Battery:Battery has less than 25% energy remaining.9-4T-BERD 2207User’s GuideSECTION 9 - Specifications DS3 Option SpecificationsUser’s Guide T-BERD 22079-59.3DS3 OPTION SPECIFICATIONS9.3.1DS3 Specifications9.3.1.1Framing Formats9.3.1.2Patterns9.3.1.3Line Coding•B3ZS9.3.1.4Connectors•WECO 560A jack9.3.1.5Receiver (Single)Frequency:44,736 Mb/s ±300ppmLevel:HIGH: Accepts Nominal 1.2 Vp, 0 ft. of cable from High sourceDSX: Accepts Nominal 0.6 Vp, 450 ft. of c able from High source or monitor LOW: Accepts Nominal 0.3 Vp, 900 ft. of cable from High source9.3.1.6Transmitter (Single)Frequency:44,736 Mb/s ±20ppmPulse:HIGH: Nominal 1.2 Vp (Signal meets ANSI specification T1.102-1993 and ITU-TG.703 when subjected to 450 feet of cable loss.)•Auto• Muxed M13•Unframed • C-bit•M13• Muxed C-bit•1111• 215-1•1100 (Idle)• 220-1•1010 (AIS)• 223-1•1010• User (3 to 24 bit programmable)SECTION 9 - SpecificationsDS3 Option SpecificationsDSX: Nominal 0.91 Vp (Signal meets ANSI specification T1.102-1993 andITU-TG.703.)LOW: Nominal 0.31 VpTiming:Internal ClockRecovered Clock9.3.2DS3 Measurements9.3.2.1Summary•Bit Errors•Frame Errors•Bipolar Violations•Receive Frequenc•Parity Errors•FEAC Messages•C-bit Errors•DS2 Frame Errors•FEBE•Pattern Slip9.3.2.2Logic•Bit Errors•Pattern Slips•Bit Error Rate•Pattern Loss Seconds•Bit Errored Seconds•Error Free Seconds•Pattern Losses•% Error Free Seconds9.3.2.3Bipolar Violations•BPV•BPV Rate•BPV Errored Seconds9-6T-BERD 2207User’s GuideSECTION 9 - SpecificationsDS3 Option Specifications 9.3.2.4Frame Errors•Frame Error Rate•FEBE Rate•Frame Error Seconds•DS2 Frame Errors•Out of Frame Seconds•DS2 Frame Error Rate•C-bit Errors•Received X-bit•C-bit Error Rate•Transmit X-bit•FEBE•Frame Loss Count9.3.2.5Parity•Parity Errors•Parity Error Rate•Parity Error Seconds9.3.2.6Signal•Signal Loss•Signal Loss Seconds•Receive Frequency•Receive Signal Level•Transmit FrequencyUser’s Guide T-BERD 22079-7。
9070T150D1产品数据表说明书
9070T150D1Industrial Control TransformersProduct Description PRODUCT DESCRIPTIONControl power transformers from Schneider Electric set the industry standard for design innovation and performance. They are designed with low impedance windings for excellent voltage regulation, and can accomodate the high inrush current associated with contactors, starters, solenoids, and relays.A variety of designs are available to meet the diverse needs of panel builders and machinery OEMs. The versatility of our control transformer line offers unparalleled options for design engineers. We also have one of the most extensive offering of custom products with no minimum order requirements.We have a national network of distributors to ensure prompt delivery, including industry leading delivery on custom products. In most cases, we can design, manufacture, and ship a custom unit in two weeks or less.The Global Product Offering—Type TType T is our most popular and complete line of control transformers. It comes with unmatched design innovations for top performance and is manufactured using the most advanced insulating materials. The Type T control transformer is the best choice if size and cost are of concern.The Exceptional Regulation Offering —Type EOConstructed with traditional materials and manufacturing processes, Type EO transformers are UL and CSA Component Recognized. Units are designed for 55°C rise. All units are 60HZ rated, withde-rated VA levels for 50HZ.Transformers with Fuse Block Protection—Types TF and EOFWe offer both product lines with factory installed overcurrent protection fuse blocks.Type TF and EOF transformers consist of two primary fuse blocks and one secondary fuse block, a configuration that meets the majority of overcurrent needs by panel builders and machinery OEMs. Since the fuse blocks are pre-wired and mounted on top of the transformer, the Type TF and EOF transformers have the same footprint as the Type T and Type EO units, respectively. This design frees up space normally used for separate fuse blocksWe also have an extensive fuse block offering for custom applications. See the overcurrent section of this catalog for full details.Leaded Control Transformer LineSchneider Electric offers transformers with internally pre-wired 24-inch primary and secondary leads, instead of terminal boards, to make installation easier and faster for many applications. These are only available for single voltage primary and single voltage secondary applications.MultiTapSchneider Electric offers Type T and Type EO transformers in the MultiTap version. The MultiTap control transformer was designed to respond to the increased need for voltage and stock flexibility. It combines multiple primary voltages with one or more secondary voltages, all in a single transfomer. The most flexible MultiTap voltage is the Universal, available on the Type T product line only. It allows for standard primary voltages of 208 to 600V and 110, 115, or 120V secondary voltages.Industrial Control TransformersType T TransformersTYPE T TRANSFORMERSThe Type T units are designed for the global market and are the best choice when size and cost are of concern. This is our most popular and complete offering of industrial control transformers. The following features are included:•50/60 Hz rated•Customer installed accessories (Finger-Safe covers, fuse blocks, fuse clips)•Type T transformers are designed with various temperature classes:—25–150 VA with a 55° C temperature rise, 105° C insulation —200–350 VA with a 80° C temperature rise, 130° C insulation —500–5000 VA with a 115° C temperature rise, 180° C insulationSchneider Electric manufactures a wide variety of voltage combinations for control transformers. The voltage combinations are expressed as “Voltage Codes”, and are embedded within the catalog number of the transformer. Standard codes are listed. If the voltage combination you need is not listed, please call your Schneider Electric distributor for assistance.CE MarkingIndustrial control transformers (ICTs) entering the European Union (EU) after January 1, 1997 are required by EU standards to have CE marking or Declaration of Conformity to CE. EU documentation requires compliance with specification EN 61 558 of the Low Voltage Directive. Type T ICTs from Schneider Electric comply with this specification and are third party tested to T ÜV standards, which adhere to, and are accepted by, EU standards. A Declaration of Conformity for all Type T units is available upon request.Because of different overload criteria in the CE specification,Schneider Elecric dual rates these transformers for UL VA, cUL VA, CSA VA, NOM VA and CE VA ratings (see “Type T VA Ratings” table). Because they are widely used with control circuit panels, ICTs are also required to comply with EN 60 204 and EN 61 558 in these applications. The Type T transformer line complies with EN 60 204 when Fingersafe ® covers are installed.For more information regarding CE marking, please contact your local Schneider Electric field sales office.Type T VA RatingsUL, cUL, CSA and NOM VA RatingCEVA Rating252550507575100100150150200200250160300200350250500300750500100063015001000200015003000200050003000Type T ListingsListingFileVA RangeUL E61239, Guide XPTQ225–5000cUL E612391500–5000CSALR37055, Guide 184-N-9025–1000EN947923, EN 61 558/01.89 (TUV ref: 00941-RAG/sg E9371495E01)25–2009579078, EN 61 558/01.89 (TUV ref: 00941-RAG/sg E9471921E01)250–10009579078, EN 61 558/01.89 (TUV ref: 00941-RAG/sg E9471921.02E01)1500–3000Industrial Control TransformersType T Transformers120 Volt Control SecondaryVoltage and Connection OptionsVoltage CodeVoltagesConnectionsPrimary SecondaryPrimarySecondaryD1220 x 440230 x 460240 x 480110115120220/230/240 V:Connect to H1 and H4Jumper H1 with H3Jumper H2 with H4440/460/480 V:Connect to H1 and H4Jumper H2 with H3Connect to X1 and X2DimensionsVA CatalogNumberFigureAcc. KeyA BCEFSlotsULCEINmmINmmINmmINmmINmmINmm25259070T25D11I 3.0979 3.0076 2.5866 2.0051 2.50640.20 x 0.38 5 x 1050509070T50D11I 3.0979 3.0076 2.5866 2.0051 2.50640.20 x 0.38 5 x 1075759070T75D11I 3.3485 3.3886 2.8973 2.3861 2.81710.20 x 0.48 5 x 121001009070T100D11I 3.3485 3.3886 2.8973 2.3861 2.81710.20 x 0.48 5 x 121501509070T150D11I 3.5991 3.7595 3.2081 2.8873 3.13800.20 x 0.38 5 x 102002009070T200D11I 3.5991 3.7595 3.2081 2.8873 3.13800.20 x 0.38 5 x 102501609070T250D12I 5.30135 3.7595 3.2182 2.8873 3.13800.20 x 0.38 5 x 103002009070T300D12I 4.74120 4.50114 3.8498 2.5665 3.75950.20 x 0.38 5 x 103502509070T350D12I 5.11130 4.50114 3.8498 3.0076 3.75950.20 x 0.38 5 x 105003009070T500D12I 5.49139 4.50114 3.8498 3.5690 3.75950.20 x 0.38 5 x 107505009070T750D12I 5.61143 5.25133 4.51115 3.4387 4.381110.28 x 0.567 x 1410006309070T1000D12I 6.30160 5.25133 4.51115 4.31109 4.381110.28 x 0.567 x 14150010009070T1500D12I 5.921507.06179 6.17157 4.13105 5.811480.28 x 0.567 x 14200015009070T2000D12I 7.171827.06179 6.17157 4.56116 5.811480.28 x 0.567 x 14300020009070T3000D13I 7.241849.002298.75222 4.631187.631940.44 x 1.1311 x 29500030009070T5000D13I9.152329.002298.752226.561677.631940.44 x 1.1311 x 2914T R A N S F O R M E R SIndustrial ControlClass 9070 / Refer to Catalogs 9070CT9901, 7400CT9601Square D ® Type T and MultiTap™ TransformersType T transformers are designed with low impedance windings forexcellent voltage regulation and can accommodate the high inrush current associated with contactors, starters, solenoids, and relays. As the most popular and complete line of control transformers with unmatched design innovations for top performance, Type Ts are manufactured using the most advanced insulating materials and are the best choice if size and cost are of concern. It is available in the MultiTap version, designed to respond to the increased need for voltage and stock flexibility. It combines multiple primary voltages with one or more secondary voltages, all in a single transformer.VAVA Catalog No.$ PriceH W D W e i g h t (l b s )U L /C S A /N O MCEin (mm)in (mm)in (mm)Primary 240 x 480 Secondary 120; Primary 230 x 460 Secondary 115; or Primary 220 x 440Secondary 11025259070T25D174.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.550509070T50D177.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D192.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D1103.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D1110.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D1136.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D1159.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D1176.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D1187.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D1233.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D1322.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D1390.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D1558.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D1678.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D1941.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D11582.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 208 Secondary 12050509070T50D390.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D3108.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D3121.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D3153.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D3195.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D3242.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D3248.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D3288.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D3314.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D3443.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D3558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D3780.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D3905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D31276.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D32010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 600 Secondary 120; Primary 575 Secondary 115; or Primary 550 Secondary 11050509070T50D590.00 2.58 (65.5) 3 (76.2) 3.09 (78.5) 2.575759070T75D5108.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D5121.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D5153.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D5195.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D5242.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D5248.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D5288.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D5314.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D5443.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D5558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D5780.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D5905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D51276.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D52010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 120 Secondary 120; Primary 115 Secondary 115; or Primary 110 Secondary 11050509070T50D24312.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D24324.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D24326.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D24348.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D24475.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D24477.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D24481.00 3.8 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D24483.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D24498.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D24560.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D24594.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D24717.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D24929.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D241463.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D242010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 277 Secondary 120Primary 277 Secondary 120 (continued)2002009070T200D4195.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D4242.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D4248.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D4288.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D4314.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D4443.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D4558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D4780.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D4905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D41276.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D42010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0VA VA Catalog No.$ PriceHW D W e i g h t (l b s )U L /C S A /N O MCEin (mm)in (mmin (mm)Primary 240 x 480 Secondary 120/240; Primary 230 x 460 Secondary 115/230; orPrimary 220 x 440 Secondary 110/22050509070T50D31125.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D31131.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D31138.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D31182.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D31235.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D31248.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D31290.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D31303.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D31339.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D31473.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D31558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D31816.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D31905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D311486.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D312010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 120 x240 Secondary 120/240; Primary 115 x 230 Secondary 115/230; orPrimary 110 x 2200 Secondary 110/22050509070T50D55312.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D55324.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D55326.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D55348.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D55475.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D55477.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D55481.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D55483.00 3.80 (96.5) 4.50(114.3) 5.09 (129.3)10.55003009070T500D55498.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D55560.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D55594.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D55856.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D55929.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D551588.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D552010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 240 X 480 Secondary 24/120 (24 V limited to 20% Capacity)50509070T50D1590.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D15108.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D15138.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D15153.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D15195.00 3.2 0(81.3) 3.75 (95.3) 3.59 (91.2) 5.52501609070T250D15248.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D15290.00 3.80 (96.5) 4.50 9114.3) 4.70 (119.4)8.53502509070T350D15303.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D15339.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D15473.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D15558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D15816.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D15905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0300020009070T3000D151486.008.46 (214.9)9.00 (228.6) 6.86 (174.2)60.0500030009070T5000D152010.008.46 (214.9)9.00 (228.6)8.73 (221.7)89.0Primary 480 Secondary 24050509070T50D1290.00 2.58 (65.5) 3.00 (76.2) 3.09 (78.5) 2.575759070T75D12324.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81001009070T100D12121.00 2.89 (73.4) 3.38 (85.8) 3.34 (84.8) 3.81501509070T150D12153.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.2) 5.52002009070T200D12195.00 3.20 (81.3) 3.75 (95.3) 3.59 (91.20) 5.52501609070T250D12242.00 3.25 (82.6) 3.75 (95.3) 5.25 (133.4)7.130********T300D12248.00 3.80 (96.5) 4.50 (114.3) 4.70 (119.4)8.53502509070T350D12288.00 3.80 (96.5) 4.50 (114.3) 5.09 (129.3)10.55003009070T500D12314.00 3.80 (96.5) 4.50 (114.3) 5.46 (138.7)11.97505009070T750D12443.00 4.43 (112.5) 5.25 (133.4) 5.66 (143.8)11.010*********T1000D12558.00 4.43 (112.5) 5.25 (133.4) 6.04 (153.4)20.6150010009070T1500D12780.00 6.16 (156.5)7.06 (179.3) 5.81 (147.6)34.0200015009070T2000D12905.00 6.16 (156.5)7.06 (179.3)7.04 (178.8)47.0VA VA Catalog No.$ PriceH W DW e i g h t (l b s )U L /C S A /N O MCEin (mm)in (mm)in (mm)9070T150D1。
S01-HSD062I 翰彩6.2寸数字显示屏,HSDO62IDW1 (右侧排线) 规格书(翰彩)
Item Symbol Vcc VGH Power supply voltage VGL AVDD VCOM Logic Signal Input Level VI Min. -0.3 -0.3 -20 -0.5 0 -0.3 Max. 6.0 40 0.3 15 6 Vcc +0.3 Unit V V V V V V Note GND=0 GND=0 GND=0 AGND=0
Document Title Document No.
HSD062IDW1 Specification for Golden Supreme DC170-005948
Page No. Revision
3 / 27 1.0
Contents
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 General description ……………………………….… Absolute maximum ratings …………………………. Optical characteristics ………………………………. Block diagram ……………………………..……….. ……………………………. p.4 p.5 p.6 p.10 p.11 p.13 p.21 p.22 p.24 p.25 p.26
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
Agilent Mobile Communications DC Sources 手册说明书
power as a replacement to yourApplication Specific DC Power Supplies tailored solutions for specific needsMore detailed specifications at /find/6630081Mobile Communications DC Sources 40-100 W198182battery, enabling them to emulate the operation of various batterytypes or batteries in different charge states. Plus, these DC sources can simulate negative resistance so that you can compensate for voltage drop due to wiring in a fixture.Feature SummaryAgilent has designed in the capability and flexibility that is required for accurately testing today’s communi-cations devices as well as your next generation designs for cell phones (formats include: 3G, cdma2000,WCDMA, CDMA, TDMA, GSM, PCS,DECT, TETRA, PHS, NADC), PDAs,Bluetooth TM enabled devices, and Wireless LAN access devices.More detailed specifications at /find/66300166332A also has RS-232 interface.2Applies with current detector set to DC.3Time for the output voltage to recover to within 20 mV of final value after 0.1 to 1.5 A load change in high capacitance compensation range.4Time for the output voltage to recover to within 20 mV or 0.1% of the voltage rating of the unit following a change in load current of up to 50% of the output current rating.DC Floating VoltageOutput terminals can be floated up to +/- 50 Vdc maximum from chassis ground (+/- 240 Vdc for 66332A)Remote Sensing Voltage DropFor 66332A: Up to 2 V can be dropped in each load lead. Add 2 mV to the load regulation specification for each 1 V drop in the positive output lead. For 66309B/D, 66311B: Up to 4 V can be dropped in each load lead. Add 2 mV to the load regulation specification for each 1 V drop in the positive output lead. For 66319B/D main output, 66321B/D mainoutput: Up to 3 V total can be dropped in both load leads. For 66319B/D auxiliary output, 66321B/D auxiliary output: Up to 4 V total can be dropped in both load leads.Command Processing TimeAverage time required for the output voltage to begin to change following receipt of GPIB data is 4 ms (with display disabled).83All models offer:•Fast output response technology •Programmable output response compensation•Advanced DSP-based dynamic measurements•Current sinking for testing and calibrating charger circuitry •Extensive protection features (including broken sense lead detection)•GPIB Interface, SCPI (Standard Commands for Programmable Instruments), VXI plug&play driversIn addition, the 66319B/D and 66321B/D high performance models offer:•Output resistance programming (positive and negative)•Superior output stability with up to 6 meters of load leads •Excellent transient voltage drop (typically < 30 mV)•Three current measurement ranges •NEW! Additional advanced battery drain measurements (CCDF, long term battery drain)The new and improved 66319B/D and 66321B/D high performance models are recommended for new automated test system platforms and for R&D applications. The 66309B/D and the 66311B are available for those customers who need to replicate existing test platforms and who do not want to re-engineer existing automated test system designs.More detailed specifications at /find/66300(Continued)Output Programming Response Time For 66332A: The rise and fall time (10/90% and 90/10%) of the output voltage is < 2 ms (400 µs in fast mode).The output voltage change settles within 1 LSB (0.025% x full scale voltage) of final value in < 6 ms (2 ms in fast mode).For 66311B, 66321B/D, 66309B/D output 1, 66319B/D output 1: The rise and fall time (10/90% and 90/10%) of the output voltage is < 200 µs.Measurement TimeAverage time to process query, calculate measurement parameter and return data is 50 ms (includes the default time of 30 ms for acquiring data and 20 ms data processing overhead).GPIB Interface CapabilitiesIEEE-488.2, SCPI command set, 6630A series programming capability (not supported in 66309B/D, 66319B/D,66321B/D)Software Driver:•VXI Plug&Play•IntuiLink Connectivity SoftwareInput power(at worst case conditions: full load, 100 Vac mains)For 66311B, 66321B/D: 1.7 A, 125 W.For 66309B/D, 66319B/D: 2 A, 170 W.For 66332A: 3.5 A, 250 W.Regulatory ComplianceComplies with EMC directive 89/336/EEC (ISM 1B). Warranty Period One yearSizeFor 66309B/D, 66311B, 66319B/D,66321B/D: 212.8 mm W x 88.1 mm H x 435 mm D (8.4 in x 3.5 in x 17.13 in).For 66332A: 425.5 mm W x 88.1 mm H x 364.4 mm D (16.8 in x 3.5 in x 14.3 in).WeightFor 66309B/D, 66311B, 66319B/D,66321B/D: 9.07 kg (20 lb) net, 11.1 kg (24.5 lb) shipping. For 66332A: 12.7 kg (28 lb) net, 15.0 kg (33 lb) shipping.Application Notes:Mobile Communications Device Testing (AN 1310)5968-2424ENEvaluating Battery Run-down Performance Using the Agilent 66319D or 66321D with Option #053 14565ADevice Characterization Software (AN 1427)5988-8157ENUsing Battery Drain Analysis to Improve Mobile-Device Operating Time 5988-7772ENCurrent Drain Analysis Enhances WLAN Network Card Design and Test (AN 1468)5989-0565EN84More detailed specifications at /find/66300Opt 100Opt 120Opt 220Opt 230Opt 004 Opt 007 Opt 020(66332A only)Opt UJ0(66332A only)Opt 521Opt AYK Opt 760Opt 8ZJ Opt 8ZLRearMore detailed specifications at /find/66300 85Simplify test and analysis in R&D or on the repair benchWith the Agilent 14565B Device Characterization Software, testing,analyzing, and troubleshooting wireless and battery powereddevices is made simple. The 14565B provides a graphical user interface that lets you easily control the Mobile Communications DC Sources. It gives you access to the Mobile Communications DC Source’s high-powered measurement system and provides an oscilloscope-like view of the voltage or current waveforms of the device under test. The 14565B provides reference waveform save/recall, and provides oscilloscope-like measurement and analysis including voltage and current waveform para-meter measurements, triggering,markers, zoom control, and more.By using the advanced capabilities built into the power supply, you can spend more time testing and analyzing instead of configuring and reconfiguring multiple pieces of test equipment, such as a current shunt, oscilloscope, current probe,DMM, and datalogger.(Continued)More detailed specifications at /find/14565B 86Mobile Communications DC Sources 14565B Device Characterization SoftwareZoom capabilityment setup controlOscilloscope-like view of battery current profiles •Peak current •Talk-mode •Standby-mode •Off-modeCalculated measurements fast analystsData Logging Mode387When coupled with the 66319B/D or the 66321B/D, the 14565B also provides Battery Drain Analysis capabilities. More than just measur-ing battery run time, Battery Drain Analysis allows you to characterize current out of the battery and make tradeoffs in design that impact the current drain and battery life. By providing CCDF measurements and long-term battery drain data logging, the 14565B and 66319/21provide a complete solution for analyzing current drain so that you can optimize your device designs to achieve maximum battery run time.Save time with test automationNew capability makes it easy to automate battery current drain analysis. The 14565B can becontrolled from various programs and programming languages such as the Agilent Wireless Test Manager, NI LabView TM , Agilent VEE, Micro-soft Visual Basic, Microsoft Excel and others. Save valuable resource and time by automating time con-suming, repetitive tasks associated with characterizing battery current drains during real world operation (like video streaming, music down-loads, text messaging). The 14565B Device Characterization Software with test automation reduces setup and test time, reduces manual intervention, and provides battery drain measurement and analysis.More detailed specifications at /find/14565B Key featuresFor R&D•Fast and easy test setup •Digitize current waveforms •Accurately log battery current drain measurements from 10 seconds to 1000 hours at64,000 measurements per second •New automation capability provides operational control from many test applications•Test designs simulating different battery conditions with program-mable output resistance•Zoom capability for analyzing waveform anomalies•Adjust markers for fast measure-ments on digitized waveforms •Easily document your test results •Record test data to files for archive or analysis by other software packagesFor Repair•Compact design with multiple instrument functionality •Fast and easy test setup •Graphical user software, no programming required•Dual DC outputs for replacing the main battery and the power adapter/charger power source •Electronic load for testing the battery charger circuitry •Programmable soft limits toprotect against incorrect voltage settingsOrdering Information14565B Device Characterization with Battery Drain Analysis & Test Automation14565U Device Characterization Software Upgrade (provides upgrade from 14565A to 14565B Software)Note:Battery Drain Analysis means Data Logging and CCDF measurements.These capabilities require models66319B, 66319D, 66321B or 66321D with version A.03.00 firmware or higher and 14565B or 14565A software version 3.01or higher.。
HSD050IDW1-A20
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
H a n n Sta r D i s p l a y C o r p .
Document Title Document No.
HSD050IDW1-A10 CAS for Zenitron
Page No. Revision
2/22 1.0
Record of Revisions
Rev.
1.0
Date
Aug.,06, 2009
Sub-Model
A20
Description of change
n was first released
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
H a n n Sta r D i s p l a y C o r p .
HSD070DGT09H-HDM
1.2 Features
■ 7 (16:9 diagonal) inch configuration. ■ 6 bits + FRC driver with 1channel TTL interface ■ LED Backlight ■ Up/Down, Left/Right reversion selection 1.3 Applications ■ Mobile NB ■ Digital Photo frame ■ Multimedia applications and Others AV system
Specification 7.0 inches
800 RGB (H) x 480(V) 153.6(H) x 86.64(V)
165.0 x 104.44 x 3.5 (Typ.) Normally white
RGB Vertical stripe 0.192(H) x 0.1805(V) LED Side-light type Antiglare, Hard-Coating (3H) with EWV film
Symbol Typ
IL
180
VL
9.9
Max
-10.5
Unit Note
mA (1)(2)(3)
V
(1)(2)(3)
Note (1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normal operating conditions. (2) Ta =25±2°C (3) Test Condition: LED current 180 mA. The LED lifetime could be decreased if operating IL is larger than 225 mA.
Hann Star(瀚宇彩晶)液晶面板连接器I液晶屏驱屏线I背光板线【产品 百I度I搜I索 找 →苏州汇成元】
接口脚距 0.5 mm
0.5 mm 0.5 mm
0.5 mm 1.0 mm 0.5 mm 0.5 mm
1.0 mm 1.0 mm 1.0 mm 1.25 mm 1.25 mm 0.5 mm
0.5 mm 1.0 mm 0.5 mm 1.0 mm 1.0 mm 0.5 mm
0.5 mm 0.5 mm 1.0 mm 0.5 mm 0.5 mm 0.5 mm 1.0 mm
20455-040E-12 MSA24046P30B 20455-040E-12 AA01B-P030VA1 196357-30041-3 20455-040E-12 093F30-B0B01A FH12A-40S-05SH HD1S040HA1 805SLS-0502T1R-C1 093F30-B0B01A 093F30-B0B01A 093F30-B0B01A FI-SEB20P-HF10 DF14A-20P-1.25H 20455-040E-12 MSAK24025P400B 20455-040E-12 093F30-B0B01A AF7301-N2G11A FI-XB30SL-HF10 FI-X30SSL-HF 20455-040E-12 MSA24046P30B MSAK24025P40B AA01B-P030VA1 187098-30091 FH12A-40S-0.5SH 20455-040E-12 MSAK24025P40B MSCK240730B 196357-30041-3 MSA24046P30B 20455-040E-12 FI-XB30SL-HF10 FI-XB30SL-HF10 FI-XB30SL-HF10 FI-XB30SSRL-HF16 FI-XB30SL-HF16
FF12-31A-R12BN-D3 MSA24046P30B 20455-040E-12 FH12-40S-0.5SH FI-X30SSL-HF FI-XB30SL-HF10 093F30-B0B01A 20455-040E-12 FI-XB30SL-HF10 FI-XB30SL-HF10 093F30-B0B01A FI-XB30SL-HF10 20455-040E-12 FI-XB30SL-HF10 MDF76URW-30S-1H 20455-040E-12 DF19L-20P-1H MSAK24024P40 FI-XB30SL-HF10 FI-XB30SL-HF10 FI-XB30SL-HF10 20455-040E-12 20455-040E-12 MDF76GW-30W-1H FI-X30SSL-HF10 20455-040E-12 20455-040E-12 FI-X30SSL-HF FI-X30SSL-HF FI-E30S FI-XB30SSRL-HF16 FI-X30SSL-HF DF14-20P-1.25H DF14-20P-1.25H DF14-20P-1.25H MDF76GW-30S-1H FI-XB30SSRL-HF16 FI-XB30SSRL-HF16 FI-XB30SSRL-HF16 FI-XB30SSRLA-HF16 MDF76URW-30S-1H FI-XB30SSRLA-HF16 MDF76URW-30S-1H MDF76URW-30S-1H MDF76URW-30S-1H MDF76URW-30S-1H FI-X30SSL-HF FI-X30SSL-HF
HSD070IDW1-D 数据手册
Document No. DC140-000581 Revision 1.4TO : SolomonDate : Mar, 20, 2009HannStar Product Specification(Formal)7” Color TFT-LCD ModuleModel: HSD070IDW1-D**Note: 1.Please contact HannStar Display Corp. before designing your product based on this module specification.2.The information contained herein is presented merely to indicate the characteristics andperformance of our products. No responsibility is assumed by HannStar for any intellectualproperty claims or other problems that may result from application based on the moduledescribed herein.3.The mark “ ** ” of Model means sub-model code.Document No. DC140-000581 Revision 1.4Record of RevisionsRev. Date Sub-Model Description of changeFormal Product Specification was first issued.1.4 Feb, 25, 2009 -----Document No. DC140-000581 Revision 1.4Contents1.0 General description ……………………………….… p.42.0 Absolute maximum ratings …………………………. p.53.0 Optical characteristics ………………………………. p.64.0 Block diagram ……………………………..……….. p.105.0 Interface pin connection ……………………………. p.116.0 Electrical characteristics ……………………………. p.137.0 Reliability test items…………………………………… p.218.0 Outline dimension …………………………….…… p.229.0 Lot mark ……………………………………………... p.2410.0 Package specification ………………………………. p.2511.0 General precaution ……………………………………. p.26Document No. DC140-000581Revision1.41.0 GENERAL DESCRIPTION1.1 IntroductionHannStar Display model HSD070IDW1-D is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back- light system. This TFT LCD has a 7.0 (16:9) inch diagonally measured active display area with WVGA (800 horizontal by 480 vertical pixel) resolution. 1.2 Features■ 7 (16:9 diagonal) inch configuration■ 6 bits + FRC driver with 1channel TTL interface ■ LED Backlight■ Up/Down, Left/Right reversion selection ■ RoHS/ Halogen Free Compliance 1.3 Applications■ Automotive ■ Mobile NB■ Digital Photo frame■ Multimedia applications and Others AV system 1.4 General informationItem Specification UnitOutline Dimension 164.9 x 100.0 x 5.7 (Typ.) mm Display area 153.6(H) x 86.64(V) mm Number of Pixel 800 RGB(H) x 480(V) pixels Pixel pitch 0.192(H) x 0.1805(V) mm Pixel arrangement RGB Vertical stripe Display mode Normally whiteSurface treatment Antiglare, Hard-Coating(3H) with EWV film Weight 170 (Typ.)g Back-light Single LED (Side-Light type) PowerConsumptionB/L System1.68(Max.)W1.5 Mechanical InformationItemMin. Typ. Max. Unit Horizontal(H)164.6 164.9 165.2 mm Vertical(V)99.7 100.0 100.3 mm ModuleSizeDepth(D)5.4 5.76.0 mm Weight (Without inverter)－170－gDocument No. DC140-000581 Revision 1.4 2.0 ABSOLUTE MAXIMUM RATINGS2.1 Electrical Absolute Rating2.1.1 TFT LCD ModuleItem Symbol Min. Max. Unit NoteVcc -0.3 6.0 V GND=0V GH0.3 40 V GND=0 Power supply voltageV GL-20 0.3 V GND=0AV DD0.5 15 V AGND=0V COM0 6 VLogic Signal Input Level V I-0.3 Vcc +0.3 V2.1.2 Back-Light UnitItem Symbol Typ. Max. Unit Note LED current I L140 －mA (1) (2)(3)LED voltage V L10.5 －V (1) (2)(3)Note(1) Permanent damage may occur to the LCD module if beyond this specification.Functional operation should be restricted to the conditions described undernormal operating conditions.(2) Ta =25±2℃(3) Test Condition: LED current 140 mA. The LED lifetime could be decreased ifoperating IL is larger than 140mA.2.2 Environment Absolute RatingItem Symbol Min. Max. Unit Note Operating Temperature T opa-20 70 ℃Storage Temperature T stg-30 80 ℃Document No. DC140-000581 Revision 1.4 3.0 OPTICAL CHARACTERISTICS3.1 Optical specificationItem Symbol Condition Min. Typ. Max. Unit Note Contrast CR 400 500 －(1)(2) Rising T R－ 5 7Responsetime Falling TF －20 28msec (1)(3)White luminance (Center) Y L280 350 －cd/m2(1)(4)(I L=140mA) W x0.260 0.310 0.360Colorchromaticity (CIE1931) WhiteW yΘ=0Normalviewingangle0.280 0.330 0.380ΘL60 75 －Hor.ΘR60 75 －ΘU40 60 －ViewingangleVer.ΘD CR>1050 70 －(1)(4)Brightness uniformity B UNIΘ=0 70 - －% (5)(7) Optima View Direction 6 O’clock(6)3.2 Measuring Condition■Measuring surrounding: dark room■LED current I L: 140mA■Ambient temperature: 25±2o C■15min. warm-up time.3.3 Measuring Equipment■FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticityand BM-5A for other optical characteristics.■Measuring spot size: 20 ~ 21 mmDocument No. DC140-000581 Revision 1.4Document No. DC140-000581 Revision 1.4Document No. DC140-000581 Revision 1.4Document No. DC140-000581Revision1.44.0 BLOCK DIAGRAM4.1 TFT LCD Module4.2 Pixel FormatDocument No. DC140-000581 Revision 1.4 5.0 INTERFACE PIN CONNECTION5.1 TFT LCD ModuleCN2 (Input signal): FPC Down Connector, (FH28-60S-0.5SH (HIROSE), 60pin,pitch = 0.5mm) Terminalno.Symbol I/O Function1 AGND P Analog Ground2 AVDD P Analog Power3 VCC P Digital Power4 R0 I Data Input(LSB)5 R1 I Data Input6 R2 I Data Input7 R3 I Data Input8 R4 I Data Input9 R5 I Data Input10 R6 I Data Input11 R7 I Data Input(MSB)12 G0 I Data Input(LSB)13 G1 I Data Input14 G2 I Data Input15 G3 I Data Input16 G4 I Data Input17 G5 I Data Input18 G6 I Data Input19 G7 I Data Input(MSB)20 B0 I Data Input(LSB)21 B1 I Data Input22 B2 I Data Input23 B3 I Data Input24 B4 I Data Input25 B5 I Data Input26 B6 I Data Input27 B7 I Data Input(MSB)28 DCLK I Clock input29 DE I Data Enable signal30 HSD I Horizontal sync input.Negative polarity31 VSD I Vertical sync input.Negative polarity32 MODE3 I DE/SYNC mode select .normally pull high H:DE mode.L:HSD/VSD mode33 RSTB Iglobal reset pin.Active low to enter reset state.suggest to connecting with an RC reset circuit for stability .normally pullhigh.34 STBYB Istandby mode,normally pull high STBYB="1",normal operation STBYB="0",timming control ,soruce driver will turn off,all output are high-Z35 SHLR I Source right or left sequence control.SHLR="L",shift left:last data=S1<-S2…S1200=first data SHLR="H",shift right:first data=S1->SS2…S1200=last dataDocument No. DC140-000581 Revision 1.4 Terminalno.Symbol I/O Function36 VCC P Digital Power37 UPDN I gate up or down scan control. UPDN="L" , DOWN shift : G1->G2…->G480 ; UPDN="H", up shift: G1<-G2…<-G48038 GND P Digital Ground39 AGND P Analog Ground40 AVDD P Analog Power41 VCOMin I For external VCOM DC input(Optional)42 DITH I Dithering setting: DITH="H" 6bit resolution (last 2 bits of input data truncated) (default setting) DITH="L" 8bitresolution43 NC - Not connect44 NC - Not connect45 V10 P Gamma correction voltage reference46 V9 P Gamma correction voltage reference47 V8 P Gamma correction voltage reference48 V7 P Gamma correction voltage reference49 V6 P Gamma correction voltage reference50 V5 P Gamma correction voltage reference51 V4 P Gamma correction voltage reference52 V3 P Gamma correction voltage reference53 V2 P Gamma correction voltage reference54 V1 P Gamma correction voltage reference55 NC - Not connect56 VGH P Positive Power for TFT57 VCC P Digital Power58 VGL P Negative Power for TFT59 GND P Digital Ground60 NC - Not connect5.2 Back-Light UnitCN1 LED Power Source (BHSR-02VS-1) or equivalentMating Connector: (SBHT-002T-P0.5) or equivalentTerminal no. Symbol Function1 VL LED power supply (high voltage)2 GL LED power supply (low voltage)Document No. DC140-000581Revision1.46.0 ELECTRICAL CHARACTERISTICS6.1 TFT LCD ModuleItem SymbolMin.Typ.Max.UnitNoteVcc2.73.0 3.5 V V GH 14.5 15 20 V V GL -10 -7 -6.5 V Supply VoltageAV DD9.85 10 10.15 V VCOM V COMin - 3.9 - V V iH 0.7 Vcc- Vcc V Note (1)Input signal voltageV iL 0 - 0.3 VccV I DD- 5.426 - mA Vcc =3.0V I ADD - 24.1 - mA AV DD =10 V (Black)I GH - 0.128 - mA V GH =15V Current of powersupplyI GL- 0.344 - mA V GL = -7VInput level ofV1~V5 Vx AVDD/2- AVDD-0.1-V Input level ofV6~V10Vx0.1-AVDD/2-VNote (1): HSYNC, VSYNC, DE, Digital DataNote (2): Be sure to apply the power voltage as the power sequence spec. Note (3): DGND=AGND=0V,)Document No. DC140-000581 Revision 1.4Document No. DC140-000581 Revision 1.4 Note (3) Suggested Schematic of LED Back-Light DriverSuggested Schematic of LED Back-Light DriverDocument No. DC140-000581 Revision 1.46.3 AC CharacteristicsItem Symbol Min. Typ. Max. Unit Note DCLK cycle time Tcph 25 nsDCLK frequency fclk 30 40 MHzDCLK pulse duty Tcwh 40 50 60 %VSD setup time Tvst 8 nsVSD hold time Tvhd 8 nsHSD setup time Thst 8 nsHSD hold time Thhd 8 nsData setup time Tdsu 8 nsData hold time Tdhd 8 nsDE setup time Tesu 8 nsDE hold time Tehd 8 nsHorizontal display area thd 800 TcphHSD period time th 928 TcphHSD pulse width thpw 1 48 TcphHSD back porch thb 40 TcphHSD front porch thfp 40 TcphVertical display area tvd 480 thVSD period time tv 525 thVSD pulse width tvpw 3 thVSD back porch tvb 29 thVSD front porch tvfp 13 thDocument No. DC140-000581 Revision 1.4Document No. DC140-000581 Revision 1.4Document No. DC140-000581 Revision 1.4Item Min. Typ. Max. UnitT0 0.5 -- 20 msecT1 16 msecT2 20 msecT3 10 msecDocument No. DC140-000581 Revision 1.46.6 Gamma circuit** Suggested Gamma Circuit. **Document No. DC140-000581 Revision 1.47.0 Reliability test itemsNo.Item Conditions Remark1 High Temperature Storage Ta=+80o C, 240hrs2 Low Temperature Storage Ta=-30o C, 240hrs3 High Temperature Operation Ta=+70o C, 240hrs4 Low Temperature Operation Ta=-20o C, 240hrs5 High Temperature and High Humidity(operation)Ta=+60o C, 90%RH, 240hrs6 Thermal Cycling Test (non operation) -30o C(30min) → +80o C(30min), 200cycles7 Electrostatic Discharge ±200V,200pF(0Ω) 1 time/each terminal8 Vibration 1.Random:1.04Grms, 5~500Hz, X/Y/Z,30min/each direction2. Sine:Freq. Range: 8~33.3HzStoke: 1.3mmSweep: 2.9G, 33.3~400HzX/Z: 2hr, Y: 4hr, cyc: 15min9 Shock 100G, 6ms, ±X, ±Y, ±Z3 time for each direction JIS C7021, A-10 (Condition A)10 Vibration (with carton) Random: 0.015G^2/Hz, 5~200Hz-6dB/Octave, 200~400HzXYZ each direction: 2hr11 Drop (with carton) Height: 60cm1 corner, 3 edges, 6 surfacesJIS Z0202Note: There is no display function NG issue occurred, all the cosmetic specification is judged before the reliability stress.Document No. DC140-000581 Revision1.48.0 OUTLINE DIMENSION8.1 Outline DimensionU Unit : mmDocument No. DC140-000581 Revision 1.4BM Assembly Tolerance0 ≦(A’-A) ≦2 (mm)│B’-B│≦1 (mm)Document No. DC140-000581 Revision 1.4Document No. DC140-000581 Revision 1.4 10.0 PACKAGE SPECIFICATION10.1 Packing form(1) Package quantity in one carton: 80 pieces.(2) Carton size: 451mm×375mm×284mm.10.2 Packing assembly drawingsMaterial NoticeBox Corrugated Paper Board (AB Flute) Partition/Pad Corrugated Paper Board (B Flute)Corner Pad Corrugated Paper Board (AB Flute)ESD bag PEDocument No. DC140-000581 Revision 1.4 11.0 GENERAL PRECAUTION11.1 Use RestrictionThis product is not authorized for use in life supporting systems, aircraft navigation control s ystems, military systems and any other application where performance failure could bel ife threatening or otherwise catastrophic.11.2 Disassembling or ModificationD o not disassemble or modify the module. It may damage sensitive parts inside LCDm odule, and may cause scratches or dust on the display. HannStar does not warrant the m odule, if customers disassemble or modify the module.11.3 Breakage of LCD Panel11.3.1.If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquidcrystal, and do not contact liquid crystal with skin.11.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately.11.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol andrinse thoroughly with water.11.3.4. Handle carefully with chips of glass that may cause injury, when the glass isbroken.11.4 Electric Shock11.4.1. Disconnect power supply before handling LCD module.11.4.2. Do not pull or fold the LED cable.11.4.3. Do not touch the parts inside LCD modules and the fluorescent LED’s connectoror cables in order to prevent electric shock.11.5 Absolute Maximum Ratings and Power Protection Circuit11.5.1. Do not exceed the absolute maximum rating values, such as the supply voltagevariation, input voltage variation, variation in parts’ parameters, environmentaltemperature, etc., otherwise LCD module may be damaged.11.5.2. Please do not leave LCD module in the environment of high humidity and hightemperature for a long time.11.5.3. It’s recommended to employ protection circuit for power supply.Document No. DC140-000581 Revision 1.411.6 Operation11.6.1 Do not touch, push or rub the polarizer with anything harder than HB pencil lead.11.6.2 Use fingerstalls of soft gloves in order to keep clean display quality, when personshandle the LCD module for incoming inspection or assembly.11.6.3 When the surface is dusty, please wipe gently with absorbent cotton or other softmaterial.11.6.4 Wipe off saliva or water drops as soon as possible. If saliva or water drops contactwith polarizer for a long time, they may causes deformation or color fading.11.6.5 When cleaning the adhesives, please use absorbent cotton wetted with a littlepetroleum benzine or other adequate solvent.11.7 MechanismPlease mount LCD module by using mouting holes arranged in four corners tightly.11.8 Static Electricity11.8.1 Protection film must remove very slowly from the surface of LCD module top revent from electrostatic occurrence.11.8.2. Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is veryw eak to electrostatic discharge. Please be careful with electrostatic discharge.P ersons who handle the module should be grounded through adequate methods.11.9 Strong Light ExposureThe module shall not be exposed under strong light such as direct sunlight. Otherwise,display characteristics may be changed.11.10 DisposalWhen disposing LCD module, obey the local environmental regulations.。
Hannwell产品列表-2013.11.23更新
外围尺寸FOR CPT 2.0/2.2 QCIF fpc可共用 外围尺寸FOR AUO 外围尺寸FOR CPT 外围跟FPC尺寸for天马 外围尺寸FOR AUO
3225C/68050/NT35702 240*320 /ILI9328/HX8347A 240*320
2.4"QVGA
Байду номын сангаас
HSD024F3N5-A10 HSD024F3N5-B10 HSD024F3N5-D10 ILI9341
玻璃尺寸W*H*D 27.7*32.24 31.832*41.42 31.832*41.42 35.1*46.2 38.048*50.16 37.12*52.82 49.752*41.664 40.58*56.96 40.58*56.96 40.58*56.96 40.58*56.96 44.2*62 44.2*62 46.2*64.75 46.2*64.75 41.7*69.7 41.7*69.7 43*73.2 43*73.2 51.6*71.0 51.6*71.0 45.9*78.1 45.9*78.1 52.96*81.34 52.96*81.34 52.96*81.34 50.34*85.3 50.34*85.3 50.34*85.3 56.2*87.3 56.2*87.3 56.2*87.3 56.2*87.3 58.68*90.32 58.68*90.32 58.68*90.32
Resolution 128*128 128*160 128*160 176*220 176*220 240*320 320*240
视角 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点 12点
HSD050IDW1-A
Unit mm mm pixels mm
g W W
1.5 Mechanical Information Item Horizontal (H) Module Vertical (V) Size Depth (D) Weight (Without inverter)
Min. 118.2 77.25 -
Date
May, 07, 2009
Sub-Model
A30
Description of change
Formal Product Specification was first released.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
H a n n Sta r Di sp l a y C o rp .
Document Title Document No. HSD050IDW1-A30 Formal Specification Page No. Revision 3/22 1.2
Contents
1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 General description ……………………………….… Absolute maximum ratings …………………………. Optical characteristics ………………………………. Block diagram …………………………….. ……….. ……………………. p.4 p.5 p.6 p.10 p.11 p.12 p.17 p.18 p.19 p.20 p.21
LMT070DICFWD-NAA-Manual-Rev0.2
LCD Module User Manual
Prepared by: K.C.
Date: 2010-11-18
Checked by: Date:
Approved by: Date:
Rev. Descriptions 0.1 Preliminary release 0.2 Update Jumper Setting
Vertical Sync Input
Pull Hi
Horizontal Sync Input
Data Clock Input
Data shall be latched at the falling edge of DCLK.
Touch Screen X- terminal
Touch Screen X+ terminal
VCC
3
B0
:
:
10
B7
11
GND
12
G0
:
:
19
G7
20
GND
21
R0
:
:
28
R7
29
GND
30
LED_ADJ
31
NC
32
NC
33
DE
34
VS
35
HS
I/O
Power
Input
Power
Input
Power
Input
Power Input --Input Input Input
36
DCLK
Input
Digital 18-bits RGB a-Si TFT active matrix Transmissive / Normal White 7.0” 190.0 x 112.0 x 12.2 (mm) (see attached drawing for details) 154.08 x 85.92 (mm) 800 x 3 (RGB) x 480 0.0642 x 0.179 (mm) RGB Stripe LED Anti-Glare Treatment 6 o’clock 4wire resistive -20 ~ +70°C -30 ~ +80°C
corrected_defects
Calibre Corrected Defects andKnown IssuesSoftware Version 2007.1_17 (Quarterly Release)February 20, 2007© 2007 Mentor Graphics CorporationAll rights reserved.This document contains information that is proprietary to Mentor Graphics Corporation.The original recipient of this document may duplicate this document in whole or in part for internal business purposes only,provided that this entire notice appears in all copies.In duplicating any part of this document,the recipient agrees to make every reasonableThis document is for information and instruction purposes. Mentor Graphics reserves the right to make changes in specifications and other information contained in this publication without prior notice,and the reader should, in all cases, consult Mentor Graphics to determine whether any changes have been made.The terms and conditions governing the sale and licensing of Mentor Graphics products are set forth in written agreements between Mentor Graphics and its customers. No representation or other affirmation of fact contained in this publication shall be deemed to be a warranty or give rise to any liability of Mentor Graphics whatsoever.MENTOR GRAPHICS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.MENTOR GRAPHICS SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER(INCLUDING BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS PUBLICATION OR THE INFORMATION CONTAINED IN IT, EVEN IF MENTOR GRAPHICS CORPORATION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.RESTRICTED RIGHTS LEGEND 03/97ernment Restricted Rights.The SOFTWARE and documentation have been developed entirely at private expense and are commercial computer software provided with restricted rights. Use, duplication or disclosure by the U.S. Government or a U.S. Government subcontractor is subject to the restrictions set forth in the license agreement provided with the software pursuant to DFARS 227.7202-3(a) or as set forth in subparagraph (c)(1) and (2) of the Commercial Computer Software - Restricted Rights clause at FAR 52.227-19, as applicable.Contractor/manufacturer is:Mentor Graphics Corporation8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777.Telephone: 503.685.7000Toll-Free Telephone: 800.592.2210Website:SupportNet: /supportnetSend Feedback on Documentation:/supportnet/documentation/reply_form.cfm TRADEMARKS: The trademarks, logos and service marks ("Marks") used herein are the property of Mentor Graphics Corporation or other third parties. No one is permitted to use these Marks without the prior written consent of Mentor Graphics or the respective third-party owner. The use herein of a third-party Mark is not an attempt to indicate Mentor Graphics as a source of a product, but is intended to indicate a product from, or associated with, a particular third party. A current list of Mentor Graphics’trademarks may be viewed at:/terms_conditions/trademarks.cfm.Table of ContentsChapter 1Corrected Defects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Physical Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Calibre DESIGNrev . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Calibre Interactive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Calibre RVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Calibre nmDRC and nmDRC-H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Calibre LVS and LVS-H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Design for Manufacturability (DFM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Calibre YieldAnalyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Calibre YieldEnhancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Calibre YieldServer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Calibre Litho-Friendly Design (LFD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Parasitic Extraction (PEX). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Calibre xRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Calibre xL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 xCalibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Resolution Enhancement Technology (RET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Dense Modeling (Calibre CM1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Calibre nmOPC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Calibre TDopc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Calibre OPCverify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Calibre WORKbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Mask Data Preparation (MDP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Calibre FRACTUREc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Calibre FRACTUREt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Calibre MDP General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 General Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Calibre TVF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Calibre Licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..21 Calibre MTflex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Calibre Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Chapter 2Known Issues and Workarounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Physical Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Calibre RVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Calibre LVS and LVS-H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Design for Manufacturability (DFM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Calibre YieldAnalyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Calibre YieldEnhancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Resolution Enhancement Technology (RET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Table of Contents Dense Modeling (Calibre CM1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Calibre OPCverify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Calibre WORKbench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Mask Data Preparation (MDP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Calibre General FRACTURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Calibre MDPverify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 General Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Calibre Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 End-User License AgreementChapter1Corrected DefectsView the list of2006.4_11 Corrected Defects.Corrected defects are documented in this chapter for the following products.Physical Verification•Calibre DESIGNrev•Calibre Interactive•Calibre RVE•Calibre nmDRC and nmDRC-H•Calibre LVS and LVS-HDesign for Manufacturability (DFM)•Calibre YieldAnalyzer•Calibre YieldEnhancer•Calibre YieldServer•Calibre Litho-Friendly Design (LFD)Parasitic Extraction (PEX)•Calibre xRC•Calibre xL•xCalibrateResolution Enhancement Technology (RET)•Calibre nmOPC•Calibre TDopc•Calibre OPCverify•Calibre WORKbenchMask Data Preparation (MDP)•Calibre FRACTUREc•Calibre FRACTUREt•Calibre MDP GeneralGeneral Products•Calibre TVF•Calibre Licensing•Calibre MTflex•Calibre DocumentationInformation on Known Issues can be found in the “Known Issues and Workarounds” chapter.Corrected DefectsPhysical VerificationPhysical VerificationThis section includes corrected defects for the following products:•Calibre DESIGNrev•Calibre Interactive•Calibre RVE•Calibre nmDRC and nmDRC-H•Calibre LVS and LVS-HCalibre DESIGNrev•DR 327135 — Calibre DESIGNrev has an additional option for saving Layout Diff results.This is available in the Layout Diff dialog box.Resolution: Fixed.•DR 350886 — SVRF input file does not get mapped correctly in Calibre DESIGNrev.Resolution: Fixed.•DR 364195 — The Open Layout dialog can appear to hang if the file system is slow or a network file server is down.Resolution: Fixed.•DR 378245 — DESIGNrev crashes when combining the -nodedit and -l options.Resolution: Fixed.•DR380984—Calibre Interactive PEX writes out an Empty Source Path statement resulting in an error.Resolution: Fixed.Calibre Interactive•DR 360534 — The Environment Variables dialog box does not set and display variables correctly.Resolution: Fixed.•DR366207—The Calibre Interactive feature to launch jobs on the Sun Grid Engine may not work on the HP platform. The message “ERROR: GRID is not available!” is printed in the shell window.Resolution: Fixed.•DR 370659 — If the Area option was selected and used prior to clicking the Run DRCbutton, an application error would occur when Stop DRC was clicked.Resolution: Fixed.Corrected DefectsPhysical Verification •DR372532—Calibre Interactive did not properly detect valid rules files included in the top level rules file.Resolution: Fixed.•DR 372827 — MTflex could not be run in Calibre Interactive batch mode.Resolution: Fixed.•DR 373583 — The customization dialog box causes the display of the wrong mouse cursor.Resolution: Fixed.•DR 377596 — If environment variables are set they are not displayed or used correctly by Calibre Interactive.Resolution: Fixed.•DR 377747 — Calibre Interactive PEX “Output Intentional Device Values” option does not work correctly in “No Parasitic” mode.Resolution: Fixed.•DR 380348— Tcl error occurs with incremental DRC.Resolution:Fixed.•DR380984—Calibre Interactive PEX writes out an Empty Source Path statement resulting in an error.Resolution: Fixed.•DR 382707 — Calibre Interactive unexpectedly quits when certain Skill code is used under Cadence Virtuoso.Resolution: Fixed.•DR 382799 — Calibre LVS H-Cells file checkbox does not work correctly.Resolution: Fixed.•DR 384258— Loading a Milkyway layout format may issue a Tcl stack error.Resolution: Fixed.•DR 385524 — Calibre Interactive RVE edit-in-place does not highlight the correct cell.Resolution: Fixed.•DR 385804 — Calibre Interactive RVE has does not display netlist filter GUI correctly.Resolution: Fixed.Calibre RVE•DR 370941 — Calibre RVE was being run in 32 bit mode despite command line option specifying a 64 bit.Resolution: Fixed.Corrected DefectsPhysical Verification•DR 373523 —— This DR includes several enhancements and bug fixes related to the DFM report card.Resolution: Fixed.•DR 373580 — Group by property functionality could not handle property names withunderscore characters.Resolution: Fixed.•DR 373582 — A Tcl error was displayed after clicking the Show Histogram button in DRC RVE.Resolution: Fixed.•DR 373603 — Histogram and property page displayed differing counts.Resolution: Fixed.•DR374067—Calibre SPICE browser in RVE does not show netlist completely if file size is2 GB or larger.Resolution: Fixed.•DR 374684 — Enhance RVE backannotation to handle malformed rdb database.Resolution: Fixed.•DR 374802 — Sorting feature in RVE “property” tab does not sort correctly.Resolution: Fixed.•DR 375039 — Disable MGC total calculations in DFM Report Card.Resolution: Fixed.•DR377768—Attempting to access a database larger than4GB generates a“Format Error”when RVE is run in 32-bit mode.Resolution: Fixed.•DR 377904 — Calibre Interactive RVE issues a format error when a reading ERC Patchchk result.Resolution: Fixed.•DR 378601 — Problems occur in backannotation of DFM rdb single layer output to DEF.Resolution: Fixed.•DR 378624 — Error in sorting order of pick lists.Resolution: Fixed.•DR 379410 — dfm_drill_down operation passes all comments to the resulting layer.Resolution: Fixed.•DR 379474 — Enable RVE to use the RVE SHOW LAYERS comment when highlighting properties.Resolution: Fixed.Corrected DefectsPhysical Verification •DR 379588 — Some rule decks caused issue with DFM Report Card table accuracy.Resolution: Fixed.•DR 380272 — Should not allow version change during backannotation to DEF.Resolution: Fixed.•DR 380966 — The DRC-RVE report card does not properly populate information to the GUI.Resolution: Fixed.•DR 384932 — In some instances Calibre Interactive RVE issues an error when using the Insert Antenna Diodes controls.Resolution: Fixed.•DR 385239 — Calibre Interactive RVE does not handle PC-formatted results databasescorrectly.Resolution: Fixed.Calibre nmDRC and nmDRC-H•DR372489—On64-bit Linux systems,provide ability to check if the PID was started with an affinity set, and license only the number of CPUS set with the affinity.Resolution: Fixed. Use Linux taskset command. The following example limits the Calibre run to 3 processors:taskset -c 0-2 calibre -drc -hier -turbo rulesNote this only applies to 64-bit. Refer to the man pages for details on the taskset command.•DR 380118 — The With Width Operation would cause a segmentation fault if the lower bound of its constraint contained zero, such as > 0 < n.Resolution: Fixed.•DR 383423 — Certain cases of Rectangles ... INSIDE OF LAYER, where the layer is large and flat, could fail.Resolution: Fixed.•DR 384566 — Calibre core dumps on Rectangles operation check for some rare layoutconfigurations. Duplicate of DR 383423.Resolution: Fixed.•DR 386477 — Output from a hierarchical Rectangles operation may not receive nodenumbers if it appears in a connectivity operation.This results in the message:Bus error(core dumped). This defect exists in 2006.3 and 2006.4.Resolution: Fixed. Workaround for 2006.3 and 2006.4 is to Size the Rectangles output by 0 and use that layer for further manipulation.Corrected DefectsPhysical VerificationCalibre LVS and LVS-H•DR 106895 — *.CONNECT names are not always matched to layout port names.Resolution: Fixed.•DR 367013 — An unspecified setting for LVS Spice Allow Inline Parameters couldincorrectly give a different result from a NO setting.Resolution: Fixed.•DR 374945 — Under certain conditions, parsing DFM_NUM_VAL() function calls in a DEVice TVF_NUMeric_FUNction() block could cause LVS to crash.Resolution: Fixed.•DR 378213 — In some cases Pathchk and ERC Pathchk operations failed to apply unused device filters I, H, and IH correctly. As a result, some devices that are unused wereconsidered used and could be reported in Pathchk results even when EXCLUDE UNUSED option was in effect. This problem affected only LVS-H, flat LVS was not affected.Resolution: Fixed.Design for Manufacturability (DFM) Design for Manufacturability(DFM)This section includes corrected defects for the following products:•Calibre YieldAnalyzer•Calibre YieldEnhancer•Calibre YieldServer•Calibre Litho-Friendly Design (LFD)Calibre YieldAnalyzer•DR 369852 — Double counting for multi-layer DFM PROPERTY. Multi-layer DFMproperties involving error layers with clusters of two edges can result in an error cluster being counted twice in cases where both edges of the cluster overlap the primary layer.Same as DR 373089.Resolution: Fixed.•DR 370652 — When evaluating edge layers containing very short edges (length <= 8 dbu), the DFM PROPERTY operation could sometimes crash.Resolution: Fixed.•DR 373089 — Double counting for multi-layer DFM PROPERTY. Multi-layer DFMproperties involving error layers with clusters of two edges could result in an error cluster being counted twice in cases where both edges of the cluster overlap the primary layer.Resolution: Fixed.•DR 373573 — When evaluating edge or error cluster layers containing very short edges (length <= 8 dbu), the DFM PROPERTY operation would drop the short edges.Resolution: Fixed.•DR 374783 — Hierarchical DFM Analyze crashes for some layer configurations.Resolution: Fixed.•DR 374785 — DFM Analyze crashes if NUMWIN specifies too many windows.Resolution: Fixed.•DR 377945 — DFM Property REGION keyword is not recognized by the compiler.Resolution: Fixed.•DR 379118 — calibre -dfm -turbo could hang when the CHECKNAME option was used with DFM RDB.Resolution: Fixed.•DR 379435 — Run time issue with DFM Property.Resolution: Fixed.Design for Manufacturability (DFM)•DR 379439 — A segmentation fault occurred on large designs when DFM Property was referenced from a DFM Analyze statement.Resolution: Fixed.•DR 379776 — Excessive memory consumption in DFM Property.Resolution: Fixed.•DR 379778 — DFM RDB crashed when writing RDB files larger than 2 GB.Resolution: Fixed.•DR 380278 — Received a segmentation fault when running DFM Analyze in 64-bit mode.Resolution: Fixed.•DR380753—Multi-layer DFM PROPERTY commands involving at least one edge cluster layer could return incorrect results when PROPERTY() or VPROPERTY() functions were used for that layer.Resolution: Fixed.•DR381869—The DFM Analyze operation could crash when calls to AREA were made for polygons with more than 1024 vertices.Resolution: Fixed.Calibre YieldEnhancer•DR 370976 — Significant performance degradation in DFM FILL.Resolution: Fixed.•DR 377528 — DFM Expand Enclosure with connectivity restricted expansion towardconnected edges.Resolution: Fixed.•DR 385457 — When running calibre -drc, several DFM operations reported 0 as the remote CPU time.Resolution: Fixed.•DR 387132 — The DFM Fill MAGNITUDE value was not correctly calculated when the WINDOW STEP option was present.Resolution: Fixed.Calibre YieldServer•DR 369815 — Commands used to manage annotations were case-sensitive with respect to names.Resolution: Fixed.•DR 373210 — YS core dumps when processing the OPEN DB command.Resolution: Fixed.Design for Manufacturability (DFM)•DR 374850 — DFM Create Layer POLYGONS does not merge polygons correctly.Resolution: Fixed.•DR 374906 — Need a command to access COMMENTs attached to DFM Analyze or DFM Property in YieldServer.Resolution: Fixed.•DR 381266 — The dfm::new_layer command did not preserve select layer or connect layer.Resolution: Fixed.•DR 382868 — Problems with magnification and precision in dfm::write_rdb anddfm::new_layer.Resolution: Fixed.Calibre Litho-Friendly Design(LFD)•DR 348726 — -markerLayer did not work with MaxAreaVariabilityCheck.Resolution: Fixed.•DR 364958 — ERROR: Numeric error during expression evaluation.Resolution: Fixed. This error is written to the log file when an expression does not evaluate successfully. It should be treated as an informative message. This message informs you that the associated geometry is not written to the resulting database. It does not indicate any real problem.•DR370270—Running LFD::AreaCheck with“minLFDarea”and“-markerLayer”produced false errors in cases where the marker layer clipped features on the target layer.Resolution:Fixed.This is resolved through the new argument-map,which was added to the LFD AreaCheck.This argument lets users choose how to treat features that are only partially inside the marker layer. Refer the Litho-Friendly Design (LFD) User's Manual for complete details.•DR 371025 — In some very rare situations, InterLayerSpaceCheck had the potential tocreate an error marker where no error existed. This problem did not interfere with proper reporting of actual errors.Resolution: Fixed.Parasitic Extraction (PEX)Parasitic Extraction(PEX)This section includes corrected defects for the following products:•Calibre xRC•Calibre xL•xCalibrateCalibre xRC•DR 352716 — Better display of layout-based smashed devices.Resolution: Fixed. Smashed devices are now mapped equally between layout and source.Additionally, the first smashed device no longer has an __1 appended.•DR 365944 — Accuracy issue with PEX_FLEX_VIA_REDUCTION.Resolution: Fixed.•DR 368832 — Wrong PEX connectivity in Cadence CalibreView with Calibre v2006.3.Resolution: Fixed.•DR369478—PDB stage exited with“FATAL ERROR:NaN calculated at:<line number>”during ASIC preprocessing.Resolution: Fixed.•DR 370146 — When using PEX BA Mapfile, DSPF gives incorrect LPE results.Resolution: Fixed.•DR 370148 — Crash on Linux i386 during r-only extraction.Resolution: Fixed.•DR 370308 — Duplicate instance names in output netlist when hierarchies betweenschematic and layout do not match.Resolution: Fixed.•DR 370392 — Incorrect instance pin order in CalibreView netlist when using PEX BA Mapfile.Resolution: Fixed.•DR 370725 — Netlist united nets in source-based flow. Formerly in source-based flowunited nets were output as ideal nets. Now the formatter outputs a single net that represents the united nets. That net will contain the model of an arbitrarily chosen net, and the total capacitance for each united net will be accumulated and grounded, connecting to a node on the model that is kept.Total C is the sum of all capacitance on all united nets.The net name is the source net name. In this case, the nets that get merged are reported accordingly in the PDB SUMMARY at the end of each PDB processing in the formatter.Resolution: Fixed.Parasitic Extraction (PEX)•DR 372234 — Capacitance drops when OBSTRUCTIONs are enabled in LEF/DEF extraction.Resolution: Fixed.•DR 372261 — SignalStorm cannot accept the SPEF output because it uses a colon in the*NAME_MAP section. Same as DR 373238.Resolution: Fixed. Formerly names were mapped as X0/M1:b. Now they are mapped asX0/M1, and the net names have the pin name appended to the name map number. For example, the name map states *1 X0/M1 and the net name in the netlist is *1:b.•DR 372844 — In PHDB stage, a DEF parsing error is reported because of complex regular expressions.Resolution: Fixed. When the SPECIALNET section includes *, it is treated as a literal if it matches a component name and a wildcard if it does not.•DR 373238 — SPEF name mapping issue for use in PrimeTime.Resolution: See DR 372261.•DR 374965 — Errors in VCMP thickness values in 2006.4_23.Resolution: Fixed.•DR 378067 — The formatter stage crashes when creating DSPF PrimeTime output with coupled capacitance.Resolution: Fixed. PrimeTime does not support DSPF with coupled capacitance, so this particular combination now produces an error message.•DR 378149 — LEF/DEF with GDS causes seg fault.Resolution: Fixed.•DR 378405 — TC1 and TC2 in PEX Resistance Parameters ignored.Resolution: Fixed.•DR 380155 — Wrong capacitance values in 65 nm designs extracted with in-die variation using TSMC calibrated rules.Resolution: Fixed.•DR382465—When running flat LVS and xRC with source names but not source-based,get inapplicable error message: “SOURCE_BASED_FLOW is not supported with -cb”Resolution: Fixed.•DR 386265 — Device definitions are duplicated in extracted netlist.Resolution: Fixed.•DR 388833 — When using certain in-die variation configurations, performance optimizations caused incorrect in-die variation modifications.Resolution: Fixed.Parasitic Extraction (PEX)Calibre xL•DR367417—CalibreView requires post-processing for k-elements syntax when Spectre or Agilent ADS used.Resolution: Fixed.•DR 381045 — For mutual inductance, implement the new ELDO KR syntax.Resolution: Fixed.•DR 382392 — Text ports cause problems for inductance engine.Resolution: Fixed.•DR 384983 — Simple testcase produces segmentation violation in inductance extraction (self or differential pair).Resolution: Fixed.xCalibrate•DR 331420 — Add non-adjacent conductor calibration to xCalibrate.Resolution: Fixed.•DR 356763 — Add error checking to xCalibrate batch flow.Resolution: Fixed.•DR367291—The.mipt converter should not require a space around the“=”in.mipt syntax.Resolution: Fixed.•DR 369766 — Smart max_distance should have a minimum value.Resolution: Fixed. The smart max_distance parameter has a minimum value of 1 micron.•DR 384936 — Calibration failed via GUI.Resolution: Fixed.Resolution Enhancement Technology (RET) Resolution Enhancement Technology(RET)This section includes corrected defects for the following products:•Dense Modeling (Calibre CM1)•Calibre nmOPC•Calibre TDopc•Calibre OPCverify•Calibre WORKbenchDense Modeling(Calibre CM1)•DR 369560 — Memory Leakage in modelflow_v2. When using the -turbo option withdependencies, the Calibre CM1 engine may consume all available memory due to the way memory is handled in 2006.4, causing performance issues. This effect does not occur when the -turbo option is used without dependencies, or dependencies are used without the -turbo option.Although this problem appears to be a memory leak,the memory used by the Calibre CM1 engine is released at the end of the run.Resolution: Fixed.Calibre nmOPC•DR 373251 — Crash with “Reading after DOR” message. Problem can occur when allsimulated layers have a constant fill over the area of at least 5x5um and there are at least 2 concurrent image commands. Problem does not appear when vt5 is used or with doubleexposure simulations.Resolution: Fixed.•DR 374149 — The keyword SQUARE or second value provided for OPPOSITEEXTENDED in the MRC_RULE definition behaves the same way as the EUCLIDEAN metric.Resolution: Fixed.•DR 379987 — FRAGMENT_SET_DISPLACEMENT does not work depending on tile boundary location.Resolution: Fixed.•DR 382368 — Hierarchical “sliver” type MRC violation is created near a tile boundary.Resolution: Fixed.。
瑞特拉电子产品购买指南说明书
241For additional technical information visit Metric measurements for this product are exact, imperial measurements are rounded to the nearest whole numberUseful Cooling Capacity: 2400 - 5794 BTU (703 - 1697 W)Part No. with basic controller 3303.1042)3303.1142)3304.1043304.1143304.1443305.1043305.1143305.144Part No. with comfort controller 3303.5042)3303.5142)3304.5043304.5143304.5443305.5043305.5143305.544Voltage V , Hz230, 50/60115, 60230, 50/60115, 60400, 50/ 460, 60, 3~230, 50/60115, 60400, 50/ 460, 60, 3~Dimensions inches (mm)H x W x D24 x 11 x 12 (620 x 285 x 298)40 x 16 x 14 (1020 x 405 x 358)Useful cooling capacity Q KBTU (W)T i 131 T a 1312400 (703)3916 (1147)5794 (1697)Useful cooling capacity Q K to DIN 3168 BTU (W)T i 95 T a 951708/2083(500/610)1708 (500)3415/3620 (1000/1060)5123/5157 (1500/1510)T i 95 T a 122956/1195(280/350)956 (280)2698/2869 (790/840)4201/4269 (1230/1250)Rated current maximum 2.6/2.6 A 5.7 A 5.4/5.0 A 10.6/11.1 A 2.8/2.9 A 6.0/6.5 A 12.1/13.6 A 2.6/2.9 A Starting current 5.1/6.4 A 11.5 A 12.0/14.0 A 26.0/28.0 A 11.5/12.7 A 22.0/24.0 A 42.0/46.0 A 12.2/11.3 A Pre-fuse T 10.0 A 10.0 A 10.0 A 16.0 A 10.0 A 1)16.0 A 20.0 A 10.0 A 1)Power consumption Pel toDIN 3168T i 95 T a 95360/380 W 470 W 700/650 W 725/680 W 580/550 W 850/1000 W 880/1050 W 800/980 W T i 95 T a 122420/390 W500 W 750/710 W 780/750 W 660/680 W 1000/1160 W 1040/1200 W 960/1150 W Cooling coefficient j =Q K /PelT i 95 T a 95 1.4 1.7 1.8 1.7 1.9Refrigerant R134a, 6.0 oz (170 g)R134a, 17.6 oz (500 g)R134a, 21.1 oz (600 g)Maximum allowable operating pressure 406 psi (28 bar)363 psi (25 bar)Temperature and setting range Comfort Controller - 68 to 131° F (+20 to +55° C) / Basic Controller - 86 to 131° F (+30 to +55° C)Environmental ratings UL Type 4X (IP 66)Duty cycle 100%Type of connection Plug-in terminal strip Weight lb (kg)55.1 (25)108.2 (49)119.0 (54)110.2 (50)112.4 (51)123.5 (56)114.6 (52)Material Type 304 stainless steelAir displacement offans External circuit 203 cfm (345 m 3/h)530 cfm (900 m 3/h)530 cfm (900 m 3/h)Internal circuit 182 cfm (310 m 3/h)353 cfm (600 m 3/h)471 cfm (800 m 3/h)Temperature control Basic or comfort controller (factory setting 95° F [+35° C])Accessories PU Page Door-operated switch 14127.010–Master/slave cable for comfortcontroller13124.100–3124.100267RiDiag II including cables for comfortcontroller13159.100267Interface card for comfort controller 13124.200268Condensate hose 13301.6103301.6122731) Motor circuit breaker. 2)Internal condensate evaporator not included. Special voltages and technical modifications available on request.Wallmounted UL T ype 4X Air ConditionerCon guration:Fully wired ready for connection, including drilling template and assembly parts. With nano-coated condenser and integrated condensate evaporator.Protection Ratings:UL and cUL recognized, CSA UL Type 4XUL file: SA8250 Material:Type 304 stainless steel Note:Air conditioner with comfortcontroller may be integrated into a monitoring system with an optional interface card 3124.20 (RS 232, RS 485, RS 422 and PLC interface). See page 268. Made in the USA.000C o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a f h .c o242For additional technical information visit Metric measurements for this product are exact, imperial measurements are rounded to the nearest whole numberUseful Cooling Capacity: 8706 - 10525 BTU (2550 - 3083 W)Part No. with basic controller 3328.1043328.1143328.1443329.1043329.1143329.144Part No. with comfort controller 3328.5043328.5143328.5443329.5043329.5143329.544Rated operating voltage V , Hz 230, 50/60115, 50/60400, 50/460, 60, 3~230, 50/60115, 50/60400, 50/460, 60, 3~Dimensions inches (mm)H x W x D 65 x 16 x 15 (1650 x 405 x 388)Useful cooling capacity Q K BTU (W)T i 131 T a 1318706 (2550)10525 (3083)Useful cooling capacity Q K to DIN 3168 BTU (W)T i 95 T a 956860/8025 (2000/2350)8538/9392 (2500/2750)T i 95 T a 1224952/5772 (1450/1690)5464/5977 (1600/1750)Rated current max. 7.5 A/9.1 A 14.7 A/17.3 A 2.8 A/3.3 A 8.6 A/10.6 A 17.0 A/22.0 A 3.7 A/3.8 A Start-up current 22.0 A/26.0 A36.0 A/39.0 A6.8 A/7.8 A 21.0 A/21.0 A44.0 A/42.0 A6.8 A/7.6 A Pre-fuse T16.0 A25.0 A 10.0A/10.0 A 1)16.0 A 25.0 A 10.0 A/10.0 A 1)Power consumption Pel to DIN 3168 T i 95 T a 951025/1200 W 1085/1250 W 1050/1275 W 1450/1675 W 1500/1725 W 1425/1625 W T i 95 T a 1221250/1350 W1300/1410 W1275/1525 W1625/2000 W1675/2065 W1675/1975 WCooling coefficient j = Q K /Pel T i 95 T a 951.72.31.92.0RefrigerantR134a, 31.7 oz (900 g)Maximum allowable operating pressure 406 psi (28 bar)Temperature and setting range Comfort Controller - 68 to 131° F (+20 to +55° C) / Basic Controller - 86 to 131° F (+30 to +55° C)Protection rating UL Type 4X (IP 66)Duty cycle 100%Type of connection Plug-in terminal stripWeight lb (kg)176.4 (80)191.8 (87)176.4 (80)183.0 (83)198.4 (90)183.0 (83)MaterialType 304 stainless steelAir displacement of fans External circuit 377 cfm (640 m 3/h)418 cfm (710 m 3/h)Internal circuit324 cfm (550 m 3/h)377 cfm (640 m 3/h)Temperature control Basic or comfort controller (factory setting 95° F [+35° C])Accessories PU Page Door-operated switch14127.010–Master/slave cable for comfort controller13124.100267RiDiag II including cables for comfort controller 13159.100267Interface card for comfort controller 13124.200268Condensate hose13301.6122731)Motor circuit breaker. Special voltages available on request. We reserve the right to make technical modifications.Wallmounted UL T ype 4X Air ConditionerCon guration:Fully wired ready for connection, including drilling template and assembly parts. With nano-coated condenser and integrated condensate evaporator.Protection Ratings: UL and cUL recognized UL Type 4X UL file: SA8250Material:Type 304 stainless steelNote:Air conditioner with comfortcontroller may be integrated into a monitoring system with an optional interface card 3124.200(RS 232, RS 485, RS 422 and PLC interface). See page 268. Made in the USA.C o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a f h .c o。
HD 257 PAGE 1 OF 8 HD FIRE PROTECT PVT. LTD. FOAM
FOAM MONITOR VARUN 443WITH OR WITHOUT JRC, STAINLESS STEEL VARIABLE & FIX FLOW 500-750-1000-1250 GPM TECHNICAL DATAMONITOR MODEL VARUN 443NOMINAL SIZE 4” (100 mm) MAX. SERVICE 175 psi (12 bar) PRESSURE NOZZLE MODEL Refer Table-IINDUCTION RATE 3% (3 to 3.9%) AFFF Foam FACTORY HYDRO 350 psi (25 bar) TEST PRESSURE MATERIALStainless SteelOPTIONAL SUPPL Y Pressure Gauge NOZZLE THRUST Flow in LPM x √Pressure REACTION IN KG. in kg/sq.cm x 0.0228INLET CONNECTION 4” or 6” (100 or 150 NB)Flange to ANSI B16.5,#150, RF END CONNECTION 4” BSP(M) for Monitor Nozzle PICKUP TUBE 3.0 mtrs. Long Clear PVCwith SS Dip T ubeMONITOR ELEVATION 90 deg. Above Horizontal & 65 deg. Below Horizontal MONITOR ROTATION 360 deg. ContinuousMONITOR Double Hand Wheel Driven MOVEMENT Enclosed Worm Gear APPROVAL UL ListedFINISHStandard Supply - Red RAL 3001MONITOR WEIGHT With HF4V Nozzle - 77.2 kg With HF4VJ Nozzle - 76.2 kgWith HF50 Nozzle - 75.0 kgORDERING Refer Ordering Information INFORMATION ChartThe Monitor has welded Stainless Steel 4inch (100mm)waterway.Vertical and horizontal rotation is through stainless steel swivel joints with double row of stainless steel ball bearings. Both vertical and horizontal movements are controlled with handwheel driven enclosed worm gear .The Monitor has large flow capacity and can be manually operated by a single fire fighter . The design ensures to prevent jet reaction forces from affecting the horizontal and vertical position of the monitor . The monitor has the ability for 360 deg. continuous horizontal rotation and angle of elevation is adjustable from 90 deg. above horizontal to 65 deg. below horizontal. The water vanes in discharge tube reduces the turbulence and friction loss, thus increasing the nozzle performance to achieve greater range. T o ensure desired performance, all the flow specified is achieved with monitor base inlet pressure.NOZZLE OPERATION INSTRUCTIONSa) In case of Variable Flow Nozzle Model HF4V , tochange the flow, press the knob and rotate to match the arrow of the knob and marking line on the Nozzle. After flow setting, set the concentrate induction by rotating the knob of the induction valve. b) T o change the spray angle, rotate the patternsleeve clockwise for straight stream or anticlock-wise for spray / fog pattern.c) When JRC is to be used, the induction setting tobe positioned on the metering valve at the JRC.DESCRIPTIONCorrosion resistant Stainless Steel Monitor Model VARUN 443 is a durable manual controlled low profile monitor for fixed installation as well as trailer mounted unit. The monitor is generally used for protection of flammable liquid storage tanks, loading racks, dykes, marine areas and many other Industrial applications. The VARUN 443 Monitor possesses several design features that provide ease of operation, minimum maintenance and resistance to normally destructive environments. VARUN 443 is used with fix flow or variable flow nozzle.INSTALLATION, TESTING & MAINTENANCEThe monitor must be installed and operated carefully by a trained person, having good knowledge of equipment. Before assembly of the monitor to supply piping, thoroughly flush the piping with water to avoid sand, residue, welding slag or other debris hindering the proper functioning of the monitor .After few initial successful tests, an authorized person must be trained to perform the inspection and testing of the monitor .The monitor should be ready for use. T o achieve this condition,scheduled inspection and maintenance operation should be performed and it must be recorded in the maintenance register book indicating the requirement or recommendation. The recommended maintenance procedure must be followed as given in the manual and also as per the local authority having jurisdiction.It is recommended to carryout weekly physical inspection of the monitor . The inspection should verify that no damage has taken place to any component and the monitor is ready for use. Carry out functional test every month for the flow, regular rotation in horizontal and vertical plane for the entire operating range to observe any leakage.Periodic proper greasing through grease nipple provided on bearing, worm wheel and worm shaftmust be ensured. Use water resistant low friction synthetic grease. Lubrication is required for smooth operation.Periodical flushing of the Nozzle with clean waterand movement of moving parts, will allow Nozzle to operate as designed.Each monitor must be operated with full flow in accordance to the guidelines of the organisation having local jurisdiction. The owner is responsible for maintaining the equipment in proper operating condition.A trained personnel for fire fighting must use the monitor . Appropriate guidance & training must be given to reduce the risk or injury.The nozzle must be fixed to the monitor carefully, the flange bolts must be tightened uniformly.The piping must be able to with stand the horizontal reaction force. Serious injury to personnel and equipment can result from improper installation.When installing monitor it is critical that flange bolts be tightened uniformly to prevent cocking of the monitor relative to the flange or valve.Before flowing water from monitor , check that all personnel are out of stream path and stream direction will not cause avoidable property damage.Application of water or foam on an electrical appliance can cause serious injury.The water supply to monitor must be increased/ decreased gradually to prevent possible waterhammer occurrence.If dust protection cap for nozzle is used, then make sure that cap is removed before starting of monitor . Maximum permissible suction lift is 2.5 meters forself-inducting nozzle.The elevation difference between monitor and JRC shall not be more than 1.5 meters.TABLE - INote :1) Monitor inlet flange standard size is 100NB (4”) to ANSI B16.5, 150#, Other optional size is 150NB (6”)2) Flow is within ±5%3) Standard Supply - SS 304/ ASTM A351 CF8 Optional Supply - A) SS 316/ ASTM A351 CF8M B) SS 316L/ ASTM A351 CF3M C) SS 304L/ ASTM A351 CF34) Foam reach data is in still air at 30/35° Nozzle elevation5)Foam concentrate induction is 3 to 3.9% as per UL requirementPART LIST (STANDARD SUPPLY)WATER FOAM MONITOR VARUN 443 WITH NOZZLE HF4VSELF INDUCTING VARIABLE FLOWOPTIONAL (WITH REDUCTION GEARBOX)PART LIST (OPTIONAL SUPPLY)PART LIST (STANDARD SUPPLY)OPTIONAL (WITH REDUCTION GEARBOXOPTION - I FOR JRCOPTION - II FOR JRC WITH JRC - VARIABLE FLOWPART LIST (OPTIONAL SUPPLY)WATER FOAM MONITOR VARUN 443 WITH NOZZLE HF50PART LIST (STANDARD SUPPLY) SELF INDUCTING FIXED FLOWOPTIONAL (WITH REDUCTION GEARBOX)PART LIST (OPTIONAL SUPPLY)JET RATIO CONTROLLER - JRCFOAM INDUCTION USING PICKUP TUBE & DIP TUBE (OPTION - I)FOAM INDUCTION USING FIRE HOSE WITH FOAM CONCENTRATE STORAGE TANK (OPTION-II)- V ALVENOTE:BY USERWATER SUPPLYWATER SUPPLYFor Water Jet onlyFLOW REACH DATANote:Jet reach data is in still air at 30/35° Nozzle elevation.LIMITED WARRANTYHD FIRE PROTECT PVT. L TD. hereby referred to as HD FIRE warrants to the original purchaser of the fire protection products manufactured by HD FIRE and to any other person to whom such equipment is transferred, that such products will be free from defect in material and workmanship under normal use and care, for two (2) years from the date of shipment by HD FIRE. Products or Components supplied or used by HD FIRE, but manufactured by others, are warranted only to the extent of the manufacturer’s warranty. No warranty is given for product or components which have been subject to misuse, improper installation, corrosion, unauthorized repair , alteration or un-maintained. HD FIRE shall not be responsible for system design errors or improper installation or inaccurate or incomplete information supplied by buyer or buyer’s representatives.HD FIRE will repair or replace defective material free of charge, which is returned to our factory, transportation charge prepaid, provided after our inspection the material is found to have been defective at the time of initial shipment from our works. HD FIRE shall not be liable for any incidental or consequential loss, damage or expense arising directly or indirectly from the use of the product including damages for injury to person, damages to property and penalties resulting from any products and components manufactured by HD FIRE. HD FIRE shall not be liable for any damages or labour charges or expense in making repair or adjustment to the product. HD FIRE shall not be liable for any damages or charges sustained in the adaptation or use of its engineering data & services. In no event shall HD Fire’s product liability exceed an amount equal to the sale price.The foregoing warranty is exclusive and in lieu of all other warranties and representation whether expressed, implied, oral or written, including but not limited to, any implied warranties or merchantability or fitness for a particular purpose. All such other warranties and representations are hereby cancelled.NOTICE :The equipment presented in this bulletin is to be installed in accordance with the latest publication standards of NFPA or other similar organisations and also with the provision of government codes or ordinances wherever applicable.The information provided by us is to the best of our knowledge and belief, and consist of general guidelines only. Site handling and installation control is not in our scope. Hence we give no guarantee for result and take no liability for damages, loss or penalties whatsoever , resulting from our suggestion, information, recommendation or damages due to our product.Product development is a continuous programme of HD FIRE PROTECT PVT. L TD. and hence the right to modify any specification without prior notice is reserved with the company.D-6/2, ROAD NO. 34, WAGLE INDUSTRIAL ESTATE, THANE 400 604, INDIA.• TEL: + (91) 22 2158 2600 • FAX: +(91) 22 2158 2602•EMAIL:***************• WEB: HD FIRE PROTECT PVT . LTD.Protecting What Matters Most to YouORDERING INFORMATION。
HT7044A中文资料
HT70XX
Test Conditions
VDD
Conditions
¾
¾
¾
¾
¾
¾
3.2V No load
¾
¾
2V VOUT=0.2V
¾ 0°C<Ta<70°C
Ta=25°C
Min. Typ.
Max.
Unit
2.09 2.132 0.02 VDET
¾ 1.6 0.5
Output Current......................................................50mA Power Consumption ..........................................200mW
Note: These are stress ratings only. Stresses exceeding the range specified under ²Absolute Maximum Ratings² may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability.
Temperature Coefficient
HT7027A
Symbol
Parameter
特拉恩商品说明书：非编程和编程商业温室温度计（2011年7月）
G
Fan relay
Hp
External humidity sensor power
Hs
External humidity sensor input
(L)
(Emergency heat indicator relay)(a)
R
24 Vac heating
Rc
24 Vac cooling
S1
External temperature sensor
Temperature setpoint • Heat Setpoint: 40°F to 90°F (4.5°C to 32°C) ranges: • Cool Setpoint: 50°F to 99°F (10°C to 37°C)
Display type: LCD
System modes:
• Heat • Cool • Auto • Off • Emergency Heat (NO Emergency Heat on 1H/1C non-programmable model)
Fan modes:
• On • Auto
Only Programmable:
Remote temperature sensor:
The thermostat includes terminals for a remote temperature sensor. They can be used for display, H/C control, or heat pump compressor lockout. The remote sensor must be 10K type 2. Recommended sensors include: Zone Temperature Sensor BAYSENS077A (X1351152801, SEN01488) or Duct Temperature Sensor BAYSTAT170A (41901133, SEN01287)
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
10
Confidential
Notes
Total 7 Series
Y2008 Mar
3
Confidential
Electrical Specification
Electrical Specification
Items TFT LCD Power Supply Voltage Back-light Unit LED Current Operating Life Time Signal System Interface Driving Method Ambient Temperature Operating Temperature Storage Temperature -200 ~ 700 -300 ~ 800 Digital TTL 2 Level Driving FPC 20mA for 1 Series 20,000hrs Total 7 Series min 3.3V power input 3.3 + 0.3 V HSD070IDW1-A Notes
7“W WVGA 800x480 Promotion Material
HSD070IDW1-A IF: TTL Digital Outline : 165x104x5.1 mm
Y2008 Mar
1
Confidential
General Specification
General Specification
retneC AA
4 . 9 8
6 . 1 8
)57.48( )A.A(6.351 )gninepo lezeB(651 )eniltuo LDM(561 54.3 52.2
1.5
Y2008 Mar
Front View
Mechanical Drawing…Front View
9
General torence +/- 0.3mm
Y2008 Mar
8
Confidential
)75.14( )5.03(
( 3 5 ) ( 1 . 8 )
)06(
1 8 0 4 9 . ( 0 M 4 8 ( D B 6 . L e 4 z 6 o e ( u l A t l o . i e n p A e n ) ) n i g ) ( 4 9 . 5 )
Confidential
Mechanical Drawing…Front View
Front View
黑色線為CPT 7”D的外型, AA, 及bezel open 藍色線為HSD 6.94”的AA及 bezel open
• A.A尺寸153.6x86.64mm • 模組外型尺寸及A.A區中心與CPT相同, 但是Bezel open及A.A區外型變寬變扁
Y2008 Mar
2
Confidential
Mechanical Specification
Mechanical Specification
Items Outline Thickness (mm) Weight (g) Assembly Bezel Open (mm) LED LED Conn. LED Cable Length (mm) HSD070IDW1-A 165x104 5.1 130 (TBD) Side mount 156 x 89.04 21 LEDs MOX125-02PS20 (低壓 低壓) 低壓 60 +/-5 MDL 200nits Notes typ typ typ (w/o metal B/C)
Y2008 Mar
4
Confidential
Optical Specification
Optical Specification
Items Luminance Contrast Ratio Brightness Uniformity Response Time View Angle R/L/U/D Color Coordinate Color Depth HSD070IDW1-A 200nits 500:1 70%(min) 25ms (typ) 1400/1300(typ) Wx:0.31, Wy:0.33 16.2M 6bits+FRC 9points Tr+Tf CR>10 Notes Center
AUO 7”w A070FW04 HSD HSD070IDW1-A
Y2008 Mar
7
பைடு நூலகம்
Confidential
Interface Pin Assignment (2)
AUO 7”w A070FW04 HSD HSD070IDW1-A
DE/SYNC mode select Reset Function Standby Function Source Right or Left Sequence Control Gate Up or Down Scan Control
Y2008 Mar
5
Confidential
Brightness Uniformity Measurement
25%
50%
75%
Y2
Y3
Y4 25%
Y9
Y1 Y7
Y5 50% Y6 75%
Y8
Y2008 Mar
6
Confidential
Interface Pin Assignment (1)
Pin 1 to Pin 30 are same as AUO.
Items Display Resolution Active Area (mm) Driver Element Pixel Arrangement Dot Pitch (mm) Display Mode Surface Treatment Display Colors HSD070IDW1-A 7.0" 800 RGB (H) × 480(V) 153.6 (H) × 86.64 (V) a-Si TFT RGB vertical stripe 0.192 (H)×0.1805(V) Normally white Antiglare, Hard-Coating (3H) 16.2M 6 bit + FRC TN Mode Wide Screen Notes