SAIB additive-446-m1
BioSpectrum凝胶成像分析系统
仪器功能介绍：
BioSpectrum凝胶成像系统可用于1D 电泳凝胶分析、Dot blot 分析、
活体动物及植物分析、菌落计算、分子量定量、GFP 表达分析、蛋白定量分析、PCR 基因表达、PCR定量、TLC 分析、Western blot 密度分析。
仪器主要技术参数：
◆多功能的暗室，光密性非常好，给化学发光成像提供了最佳条件
◆全自动变焦镜头F1.2 12.5-75mm ，通过软件可完全自动控制镜头的光圈，缩放以及聚焦
◆binning功能：有效整合像素，提高灵敏度
◆软件控制光源选择，包括顶置反射白光、紫外365nm、蓝光光源460-470nm
◆软件控制五位滤光轮设计标配三个滤光片
EtBr溴化乙锭570 - 640nm
SYBR Green 515 - 570nm波长
SYBR Gold 485 - 655nm
◆标配有超薄自发光白光屏，可折叠且高度可调
◆抽屉式紫外透照台，可选配：单波长、双波长、三波长透照台
◆防紫外观察窗，无须开启暗箱就可以观察到样品情况，更直观，更安全◆VisionWorksLS专业图像分析软件，同时可对系统进行全自动控制
仪器使用注意事项：
使用完毕后请将载物台清理干净。
超音波喷涂-防指纹油药液喷涂机设备
多异元.corp ; search by this “多异元” keyword！业务：13510701***超音波常压AS镀膜设备方案书.doc )防指纹油药液喷涂机设备，防指纹药水，抗指纹镀膜代工，大尺寸玻璃盖板镀防指纹液油，防污防指纹镀膜代工，防指纹膜，抗指纹膜，防眩光喷涂机镀膜机，ag防眩光，玻璃增透喷涂机镀膜机，ar增透喷涂1. 系統簡介 (3)2. 原理與工藝描述 (5)3. 設備Layout規劃 (7)4. 主要單元配置說明 (8)5. 產能與節拍分析 (12)6. 設備規格 (14)7. 設備驗收 (16)1.1. 概要AF-400s系统针对钢化玻璃膜的AS(AF)膜层镀膜工艺设计的专用机种，系全中国第一款以超音波雾化方式取代传统二流体喷头的常压AS镀膜机。
是一款雾化颗粒细微、沉积披覆性佳、整体CoO最低、保养最容易的连续式常压蒸镀机。
系统搭配多项基础理论为后盾而研发的机制。
1.2. 系统特点⏹可额外选购高效能大气等离子机构(JET型式)，一般客户可不用选购即可镀膜⏹可以与上、下游机构对接(尤其是后段隧道炉)，实践流水线生产的生产理念⏹药水用量采用医疗级别精密流量控制系统，流量误差值保持于5%以内，精度佳⏹药水利用率超高，耗用量低，蒸发量稳定⏹设置残余药水回收机构，可将两侧未利用的药水进行回收，可于B规产品镀膜时再利用。
⏹可协助客户建置流水线式生产线或是批次式生产线1.3. 应用范围与设备实照⏹钢化玻璃保护膜/CG工艺等表面AS(AF)膜层镀膜专用设备AF-400s 安装于千级车间实机照片，搭配回路式流水线连续生产系统AF-400s 型超音波常压AS 蒸镀系统为一非传统真空原理的镀膜系统，其镀膜原理为： 经调配出蒸气压高、沸点低的PFPE 药水，经carrier gas(载气)于常温常压环境，经高频超音波震荡雾化后，以微米颗粒方式，有方向性、带有动能的往玻璃表面移动，与表面既有的OH 官能基开始结合。
贝利莫电子无压依赖特性控制阀说明书
BACnet PICS Energy ValveEnergy ValveContentsProtocol Implementation Conformance Statement – PICS 2 BACnet Object Description 4General information Date26.01.2018Vendor Name BELIMO Automation AGVendor ID423Product Name Energy ValveProduct Model Number EV..R+(K)BAC, EV..R3+BAC, EV..F+(K)BACApplikations Software Version03.02-0000Firmware Revision12.25BACnet Protocol Revision 1.12Product Description Electronic pressure-independent characterisedcontrol valve with energy monitoringBACnet Standard Device Profile BACnet Application Specific Controller (B-ASC)Segmentation capability NoData Link Layer Options MS/TP masterBACnet IP, (Annex J)BACnet IP, (Annex J), Foreign DeviceDevice Address Binding No static device binding supportedNetworking Options NoneCharacter Sets Supported ISO 10646 (UTF-8)Gateway Options NoneNetwork Security Options Non-secure deviceConformance Listed by BTLBACnet Interoperability Building Blockssupported BIBBs Data sharing – ReadProperty-B (DS-RP-B)Data sharing – ReadPropertyMultiple-B (DS-RPM-B)Data sharing – WriteProperty-B (DS-WP-B)Data sharing – COV-B (DS-COV-B)Device management – DynamicDeviceBinding-B (DM-DDB-B) Device management – DynamicObjectBinding-B (DM-DOB-B) Device management – DeviceCommunicationControl-B (DM-DCC-B)BACnet MS/TP Baud rates9’600, 19’200, 38’400, 76’800 (Default: 38’400) Address0...127 (Default: 1)Number of nodes Max 32 (without repeater), 1 full busloadTerminating resistor120 ΩBACnet IP Port open (Default: 47’808)Parameterisation Tool through the integrated webserver !All writeable objects with instance number ≥ 90 are persistent and are not supposed to be written on a regular base.Standard Object Types Supported Objekt type Optional properties Writeable propertiesDevice DescriptionLocationActive COV SubscriptionsMax MasterMax Info FramesProfile Name Object IdentifierObject NameLocationDescriptionAPDU Timeout (1’000…60’000) Number of APDU Retries (0...10) Max Master (1...127)Max Info Frames (1...255)Analog Input [AI]DescriptionCOV IncrementAnalog Output [AO]DescriptionCOV IncrementPresent ValueAnalog Value [AV]Description Present ValueBinary Input [BI]DescriptionActive textInactive TextBinary Valve [BV]DescriptionActive textInactive TextPrresent ValueMulti-state Input [MI]DescriptionState TextMulti-state Output [MO]DescriptionState TextPresent ValueMulti-state Value [MV]DescriptionState TextPresent ValueThe device does not support the services CreateObject and DeleteObject.The specified maximum length of writable strings is based on single-byte characters andsupport up to 252 characters.Service processing The device supports the DeviceCommunicationControl and ReinitializeDevice services. No password is required.A maximum of 5 active COV subscriptions with a lifetime of 1…43‘200 sec. (12 hours) aresupported.Object Name Object Type[Instance]DescriptionCommentStatus_FlagsValues COV Increment AccessDevice Device[Inst.Nr]0…4’194’302Default: 1–WRelPos AI[1]Relative Position in %0...1005R AbsPos AI[2]Absolute Position in degree0...905R SpAnalog_V AI[5]Analog Setpoint in Volt0...10.001R RelFlow AI[10]Relative Flow in %0...1005R AbsFlow_lmin AI[11]Absolute Flow in l/min0...100’0001R AbsFlow_m3h AI[12]Absolute Flow in m3/h0...6000.1R AbsFlow_gpm AI[13]Absolute Flow in gpm0...100’0001R AbsFlow_ls AI[14]Absolute Flow in l/s0...100’0000.1R AbsFlow_lh AI[15]Absolute Flow in l/h0...100’000100R T1_C AI[20]Temperature 1 (remote) in C-10 (1201)T2_C AI[21]Temperature 2 (embedded) in C-10 (1201)DeltaT_K AI[22]Delta Temperature in K0...1301R T1_F AI[25]Temperature 1 (remote) in F14...2481R T2_F AI[26]Temperature 2 (embedded) in F14...2481R DeltaT_F AI[27]Delta Temperature in F0...2661R AbsPower_kW AI[30]Power in kW0...2.147e+610R E_Cooling_kWh AI[31]Cooling Energy in kWh0...2.147e+910R E_Heating_kWh AI[32]Heating Energy in kWh0...2.147e+910R E_Cooling_MJ AI[33]Cooling Energy in MJ0...2.147e+910R E_Heating_MJ AI[34]Heating Energy in MJ0...2.147e+910R AbsPower_kBTUh AI[35]Power in kBTU/h0...2.147e+610R E_Cooling_kBTU AI[36]Cooling Energy in kBTU0...2.147e+910R E_Heating_kBTU AI[37]Heating Energy in kBTU0...2.147e+910R RelPower AI[40]Relative Power in %0...3005R AbsPower_ton AI[45]Power in ton refrigeration0...2.147e+61R E_Cooling_tonh AI[46]Cooling Energy in ton*h0...2.147e+91R E_Heating_tonh AI[47]Heating Energy in ton*h0...2.147e+91R E_CoolReset_kWh AI[50]Cooling Energy in kWh, resettable with BV[31]0...2.147e+91R E_HeatReset_kWh AI[51]Heating Energy in kWh, resettable with BV[32]0...2.147e+91R E_CoolReset_kBTU AI[52]Cooling Energy in kBTU, resettable with BV[31]0...2.147e+91R E_HeatReset_kBTU AI[53]Heating Energy in kBTU, resettable with BV[32]0...2.147e+91RGlycolConcentration AI[60]Glycol concentration in %Measured value or override value from webserver Measured value: 0 (40)Override value: 0 (80)1RErrorState 1)AI[100]Error StateError Sensor T1: Error with remote temperature sensorError Sensor T2: Error with embedded temperature sensorError Flow Sensor: Error with the flow sensorActuator can‘t move: Mechanical overload due to blocked valve, etc.Flow with closed valve: Flow is measured but position of valve is closedAirbubbles: Air bubbles in the hydronic systemFlow not reached: Setpoint cannot be reached within 3min during flow controlPower not realized: Setpoint cannot be reached within 3min during power controlGear disengagement active: Gear disengaged button is pressedReverse flow detected: Reverse flow is detectedMP communication faulty: Internal communication between sensor and actuatorfaultyFreeze warning: Measured temperature & glycol concentration indicate thatgrease ice can build upBit 0: Error Sensor T1Bit 1: Error Sensor T2Bit 2: Error Flow SensorBit 3: Actuator cannot moveBit 4: Flow with closed valveBit 5: Air bubblesBit 6: Flow not reachedBit 7: Power not realizedBit 8: Gear disengagedBit 9: Reverse flow detectedBit 10: MP communicationfaultyBit 11: Freeze warning1RSpAbsFlow_lmin AI[111]Setpoint Absolute Flow in l/min0...100’0001R SpAbsFlow_m3h AI[112]Setpoint Absolute Flow in m3/h0...6000.1R SpAbsFlow_gpm AI[113]Setpoint Absolute Flow in gpm0...100’0001R SpAbsFlow_ls AI[114]Setpoint Absolute Flow in l/s0...100’0000.1R SpAbsFlow_lh AI[115]Setpoint Absolute Flow in l/h0...600100RSpRel AO[1]Setpoint Relative in %The set point is related either to the position, the flow (of Vmax) or the power(of Pmax).See ControlMode for more information → MV[100]0 (100)Default: 01CVmax_lmin AV[90]Maximum Flow Limit in l/min30%Vnom…VnomDefault: Vnom-WVmax_gpm AV [91]Maximum Flow Limit in gpm30%Vnom…VnomDefault: Vnom-WPmax_kW AV [95]Maximum Power Limit in kW0.5%Pnom…PnomDefault: Pnom-WObject Name Object Type[Instance]DescriptionCommentStatus_FlagsValues AccessSpPosReached BI [1]Setpoint Position reached0: No1: YesRSummaryStatus BI [101]Summary StatusSummarizes all status from MI 103 - 1070: OK1: Not OKRRstCoolEnergy BV [31]Reset Cooling EnergySets the Cooling Energy (AI[50] / AI[52]) to zero 0: None1: ResetWRstHeatEnergy BV [32]Reset Heating EnergySets the Heating Energy (AI[51] / AI[53]) to zero 0: None1: ResetWRstErrCount BV [100]Reset Error Counters0: None1: ResetWDeltaT_ MgrStatus MI [102]DeltaT Manager StatusNot selected: dT-Manager deactivatedStandby: dT-Manager activated but not activeActive: dT-Manager activeScaling standby: dT-Manager active with no limitation to the flowScaling active: dT-Manager active with limitation to the flow → AV[108]1: Not selected2: Standby3: Active4: Scaling standby5: Scaling activeRStatusSensor MI [103]Status SensorIndicates informations within the flow sensor and both temperature sensors 1: OK2: Flow sensor not OK3: T1 not OK4: T2 not OKRStatusFlow MI [104]Status FlowReverse flow detected: Energy Valves detected a reverse flowFlow not reached: Setpoint cannot be reached within 3min during flow controlFlow in closed position: Flow is measured but position of valve is closed 1: OK2: Reverse flow detected3: Flow not reached4: Flow in closed positionRStatusMedia MI [105]Status MediaAirbubbles: Airbubbles in the hydronic system. As long as there are airbubblesin the system, position control mode is active, regardless off control modesetting (ControlMode MV[100]).Freeze warning: Measured temperature & glycol concentration indicate thatgrease ice can build up 1: OK2: Airbubbles3: Freeze warningRStatusActuator MI [106]Status ActuatorActuator cannot move: Mechanical overload due to blocked valve, etc.Gear disengaged: Gear disengaged button is pressed 1: OK2: Actuator cannot move3: Gear disengagedRStatusPower MI [107]Status PowerPower not reached: Setpoint cannot be reached within 3min during powercontrol 1: OK2: Power not reachedRObject Name Object Type[Instance]DescriptionCommentStatus_FlagsValues COV Increment AccessPmax_kBTUh AV [96]Maximum Power Limit in kBTU/h0.5%Pnom…PnomDefault: Pnom-WVmax AV [100]Maximum Flow Limit in %30 (100)Default: 100-W Vnom_lmin AV [101]Nominal Volume Flow in l/min Vnom-W Vnom_gpm AV [102]Nominal Volume Flow in gpm Vnom-W SpDeltaT_K AV [103]Setpoint DeltaT in K1 (55)Default: 10-WSpDeltaT_F AV [104]Setpoint DeltaT inF2 (100)Default: 18-WPmax AV [105]Maximum Power Limit in %0.5 (100)Default: 100-W Pnom_kW AV [106]Nominal Power in kW Pnom-R Pnom_kBTUh AV [107]Nominal Power in kBTU/h Pnom-R SpFlow_DeltaT lmin AV [108]Setpoint Flow at DeltaT in l/min0...VnomDefault:Vnom-WSpFlow_DeltaT gpm AV [109]Setpoint Flow at DeltaT in gpm0...VnomDefault:Vnom-WElectronic pressure-independent characterised control valvewith energy monitoringOverride MO [1]Override ControlOverrides setpoint with defined valves. It will change back to None (1) after2 hours.1: None2: Close3: Open4: Vnom5: Vmax6: MotStop7: Pnom8: PmaxDefault: None(1)CControlMode MV [100]Control ModeThis value defines the interpretation of the setpoint 1: Position Control2: Flow Control3: Power ControlDefault: Flow control(2)WDeltaT_Limitation MV [101]DeltaT LimitationDisabled: dT-Manager not activedT-Manager: dT-Manager active with no restriction to flowdT-Manager scaling: dT-Manager active with restriction of flow → AV 108]1: Disabled2: dT-Manager3: dT-Manager scalingDefault: Disabled(1)WSpSource MV [122]Setpoint SourceIf Analog(1) then actuator is controlled by analog signal 0...10 V on wire 3.If Bus(2) then setpoint via bus SpRel AO[1]1: Analog2: BusDefault: Analog(1)W。
Nixalite 钢质鸟扑绊网产品说明书
Three-Part Specifications - Copyright 2014 - Nixalite of America Inc Premium Nixalite All Stainless Steel Bird Barrier Spikes Includes specifications for: Premium Nixalite Models S, H and W and Mounting Hardware.Nixalite of America Inc designs and manufactures the Premium Nixalite All Stainless Steel Bird Barrier Spikes in the USA with materials processed in the USA. These flexible spike strips repel all bird species, in all levels of infestation, on all types of architectural surfaces. They eliminate costly cleaning and structural maintenance caused by pest birds and their filthy habits. They protect people from the health hazards associated with pest bird waste.There are three (3) separate Premium Nixalite Bird Spike Models; the Model S, Model H and Model W. Each model is designed to fulfill a specific bird control need or application. Nixalite has manufactured these unrivaled bird spike strips since 1950 - there are no approved equals and there are no substitutions allowed. The following specification outline is presented in a modular format making it simple to include or exclude any combination of the Nixalite Premium Bird Control system as needed for each project.List Nixalite Premium Bird Barrier specifications in the following locations;Master Format 1995 – 10290 – Bird & Pest ControlMaster Format 2004 – 10 81 00 - Pest Control DevicesMaster Format 2004 – 10 81 13 – Bird Control DevicesPART 1 - GENERAL1.1 - SYSTEM DESCRIPTION:A.Nixalite Premium All Stainless Steel Bird Barrier Spike Models: Physical surfacebarriers designed to prevent all types of pest birds and climbing animals fromlanding, roosting, nesting or climbing on architectural surfaces, in all infestationlevels. There are three (3) Premium Nixalite Bird Spike models available; Model S,Model H and Model W. There is no equal to Nixalite’s Premium All Stainless SteelBird Barrier Spikes. No substitutions are allowed.B.Nixalite Bird Spike Mounting Hardware: Nixalite designed, stainless steel mountingclips combined with mechanical fasteners to hold the Nixalite Premium Bird Spikesto all types of architectural surfaces. All Premium Nixalite mounting hardware ismade of stainless steel or non-corrosive materials.C.Surface Cleaning System: Surface disinfectants, deodorizers and personal protectionequipment (PPE) that help keep installers safe when neutralizing the potentiallyhazardous bird or animal wastes that may be present. The cleaning system thensanitizes and deodorizes the surface in preparation of the Premium Nixalite BirdSpike installation.1.2 - QUALITY ASSURANCEA.Installer to obtain, review and understand Nixalite of America Inc.’s planning guides,estimating worksheets and installation instructions.B.Installer must be completely familiar with the proper installation procedures for theNixalite Premium All Stainless Steel Bird Spike model or models specified forinstallation.C.Installer must be completely familiar with the specified mounting hardware andmounting hardware installation procedures.D. Installer must obtain and record accurate and complete dimensions for each surfacespecified for Premium Nixalite Bird Spike installation. Surface dimensions are whatdrive Premium Nixalite Bird Spike quantities. Accurate dimensions ensure accuratequotations and material orders.E.All specified bird spikes must be MADE IN THE USA from materials PRODUCEDIN THE USA.F.Installed bird spikes must be Nixalite’s Premium All Stainless Steel Bird BarrierSpikes. There are no equals - no substitutions are allowed.1.3 - SUBMITTALSA.Manufacturers literature including: Nixalite Planning Guide, completed Nixalite EstimateWorksheet(s) and installation instructions for the specified Premium Nixalite Bird Spike Model and specified mounting hardware.B.Sample of specified Premium Nixalite Bird Spike Model - not less than 2” (5.1cm) in length.C.(If ColorCoat finish) Sample of Premium Nixalite Bird Spike Model in the specified color.D.Sample of specified Nixalite Bird Spike Mounting Hardware.E.Premium Nixalite Model S installation instructions and drawings from manufacturer (if specified).F.Premium Nixalite Model H installation instructions and drawings from manufacturer (if specified).G.Premium Nixalite Model W installation instructions and drawings from manufacturer (if specified)1.4 – STORAGE & HANDLINGA.Provide storage and/or protection to keep Premium Nixalite Bird Barrier Spikeshipping boxes dry, clean and undamaged. Do not stack or place other packaging orobjects on the Premium Nixalite Bird Barrier Spike shipping boxes.B.Keep Premium Nixalite All Stainless Steel Bird Barrier Spikes and MountingHardware in original packaging until needed for installation.PART 2 - PRODUCTS2.1 – ACCEPTABLE MANUFACTURERA.Nixalite of America Inc1025 16th Avenue, PO Box 727, Dept. NI, East Moline, Illinois 61244; U.S.A.P: 800.624.1189 or 309.755.8771 - F: 800.624.1196 or 309.755.0077E: ************************ or *********************B.ABC Advanced Bird Control – A division of Nixalite of America Inc.PO Box 727, Dept. NI, East Moline, Illinois 61244, U.S.A.P: 888.212.8682 or 309.755.4708 - F: 309.755.1865E: ***********************2.2 – NIXALITE PREMIUM BIRD BARRIER STRIPSA.ALL Premium Nixalite Models are all stainless steel wire and base strip spikes thatare made in the USA from materials produced in the USA.Wires: Stainless steel, 0.041” (1 mm) diameter, full-hard spring temper.Base Strip: Stainless steel, 0.25” wide x 0.02” thick (6.3 mm x 0.5 mm), full annealfor flexibility, easy strip cutting and surface shape memory.B.Premium Nixalite Spike Strip Lengths: All Premium Nixalite spike strip models areavailable in 24” (61.0 cm) and 48” (122.0 cm) strip lengths.C.Premium Nixalite Model S: Full row spike, 4” high (10.2 cm), 4” wide (10.2 cm) NOLESS THAN 120 wire points per foot. Full 180-degree wire coverage. For all birdspecies on all types of surfaces. Use in conjunction with Premium Nixalite ModelW for climbing animal barrier and mud-nest building bird control applications.D.Premium Nixalite Model H: Half row spike. 4” high (10.2 cm), 2” wide (5.1 cm), NOLESS THAN 60 wire points per foot, 90 degree wire coverage. For flat surfaces lessthan 2” in depth (5.1 cm) or in conjunction with Premium Nixalite Model S onspecific surface widths to achieve proper surface protection.E.Premium Nixalite Model W: Wall mount spike. 5-1/2” high (14.0 cm), 3” wide (7.6cm), NO LESS THAN 120 wires per foot, 180-degree wire coverage. Designed forvertical surfaces only. Use above surfaces less than 2” in depth (5.1 cm) or overother Nixalite Models when specified. Use in conjunction with Premium NixaliteModel S for climbing animal barrier and mud-nest building bird control applications.F.Nixalite Soft Tip Option: Available for Premium Nixalite Models S and H (notavailable on Model W). This replaces the pointed wire tips with flattened wire tips.Otherwise the spike is the same as the regular pointed wire spikes. Use only wherefrequent human contact is possible (or expected) and bird pressure is low.G. Finish: Natural stainless steel finish or manufacturers ColorCoat finish.H.ColorCoat: standard colors are black, white, gray, tan, brown and bronze. Choosestandard color that best suits application. Custom colors available. For custom color: installer must contact manufacturer for color matching procedures.2.3 – NIXALITE BIRD SPIKE MOUNTING HARDWAREA.To be made of stainless steel or non-corrosive materials. Standard mounting hardwareis supplied with Premium Nixalite Bird Barrier Spike Models in set quantities.Mounting Hardware must allow for bird spike strip installation, removal andreinstallation without damaging the installation surface, the spike strips or themounting system.e the Nixalite Bird Spike Mounting Hardware that best suits the installation surface.All hardware is made of either stainless steel or non-corrosive materials.Installation Surface Nixalite Bird Spike Mounting HardwareMasonry, stone, concrete; Mounting clip, sheet metal screw, masonry anchor Wood, plywood, shingles; Mounting clip, sheet metal screw, washerSheet metal, plastic, PVC; Mounting clip, sheet metal screw, washerSteel, cast iron, brass, bronze; Mounting clip, drive screw, washerPipes, cables, conduit, grates; Wire tie, wire tying tool, adhesiveC.Apply adhesive or sealant in all holes that penetrate the installation surface. Aftermounting hardware is installed, apply additional adhesive or sealant over the headsof the sheet metal screws and/or the drive screws. Do not get adhesive or sealant inthe hook end of the mounting clips.D.Optional Fastening:Glue Clips & Adhesive:If surface conditions do not allow for the use of the supplied Bird Spike MountingHardware, use the Glue Clip and Adhesive installation method. Follow the Glue Clip installation instructions available from the manufacturer.Custom Forms:Nixalite offers custom made stainless steel mounting brackets, straps or clamps tohold the Premium Nixalite Bird Spikes to installation surfaces with limited or zerosurface penetration requirements. Contact manufacturer for details on custom formdesign and/or manufacture.2.4 – SURFACE CLEANING SYSTEMA.Steri-Fab: Surface disinfectant and bactericide designed to neutralize bird waste,making it safe for removal. Steri-Fab quickly kills disease causing bacteria, parasites, fungi, insects, etc. This is a non-residual product. It becomes completely inert after it dries. Do not use with Microcide-SQ on the same surface at the same time.B.Microcide-SQ: A broad spectrum disinfectant, cleaner and deodorizer used to sanitizehard surfaces as well as fabrics and clothing. Use to kill a wide spectrum oforganisms and disease causing bacteria. Do not use with Steri-Fab on the samesurface at the same time.C.Microsan: Anti-microbial personal protection products to help prevent diseasetransmittal before, during and after working on and around surfaces contaminatedwith bird and animal wastes. Use to compliment personal protection equipmentstandards (PPE).D.Safety Equipment: Nixalite offers personal protection equipment (PPE) to protectpersonnel from the hazards related to pest bird and animal waste materials.PART 3 - EXECUTION3.1 - INSPECTIONA.Visually inspect all installation surfaces. Make sure all surfaces are clean, dry and freefrom debris or other conditions that could impede the workflow of this section. Allsurfaces must be sanitized and deodorized before Premium Nixalite Bird Spikeinstallation.B.Notify architect of detrimental conditions. Do not proceed until these conditions havebeen corrected.3.2 - PREPARATIONA.Field Measurements: Verify the dimensions for each surface specified for PremiumNixalite Bird Spike installation. Use manufacturers Planning Guides and EstimateWorksheets to verify that sufficient quantities of bird spike strips will be installed on EACH surface specified for bird control.B.Make sure all installation surface finishing requirements have been accomplishedbefore installing Premium Nixalite Bird Spike Models. They are to be the last itemsinstalled on each specified surface. DO NOT apply any surface coating or treatment(paint, sealer, etc.) over the installed Premium Nixalite Bird Spike Models or themounting hardware.C.Remove or relocate all plants, foliage or foreign objects that overhang the installationsurfaces. Note all conditions that could adversely affect the installation andperformance of the Premium Nixalite Bird Spike installation.3.3 – SURFACE CLEANINGA.All surfaces to be clean, dry and free of obstructions before the Premium Nixalite BirdSpikes are installed.B.If Bird Waste Is Present:Treat, neutralize and safely remove all bird waste from installation surfaces. Installer must follow all municipal, state and federal regulations regarding the proper removal and disposal of bird droppings and waste materials such as nests and dead birds.e Nixalite’s surface cleaning products to neutralize any bird droppings, nests andrelated waste materials that may be present. Allow all surfaces to air dry completely, and then reapply to sanitize and deodorize the surface before proceeding. Strictlyfollow treatment instructions provided with Nixalite’s surface cleaning products.e Nixalite anti-microbial and anti-bacterial personal protection products to helpprevent disease transmittal when working around surfaces contaminated with birddroppings.3.4 - INSTALLATIONA.Make sure the installation surfaces are clean, dry and free of any debris orobstructions.B.Install specified Premium Nixalite Bird Spike Models in strict accordance withmanufacturer’s spike strip spacing and installation guidelines. Protect all surfaceswhere pest birds can land, roost and nest.C.Install Nixalite’s bird spike strips so they will protect the entire surface, not just theoutside edges. No gaps are allowed in the bird spike strip coverage. Cut the birdspike strips where necessary to fit the surface properly.D.Wires of Premium Nixalite Bird Spike Models must extend over outside edges of eachsurface by at least 1/4” (0.6cm). The bird spike base strip must extend over the endsof each surface by at least 1/2” (1.2cm).E.Fasten Premium Nixalite Bird Spike Models to the surface with the mountinghardware recommended by the manufacturer. Follow the hardware spacingguidelines and installation procedures supplied by manufacturer.F.Premium Nixalite Model S; A full row spike strip model that repels all bird specieson all types of surfaces. Use in conjunction with Premium Nixalite Model W forclimbing animal barrier and mud-nest building bird control applications.G.Premium Nixalite Model H; A half row spike strip used on flat horizontal surfacesless than 2” in depth (5.1 cm). Use in conjunction with Premium Nixalite Model Son specific surface widths to achieve proper coverage and protection.H.Premium Nixalite Model W; A wall-mount spike strip used on vertical surfaces only.Do not install horizontally (down flat). Install above surfaces less than 2” in depth(5.1 cm) or over other Nixalite Models when specified by manufacturer. Use inconjunction with Premium Nixalite Model S for climbing animal barrier and mud-nest building bird control applications.I.Climbing Animal Barrier Installations;All climbing animal barrier installations use the standard pointed wire PremiumNixalite Model S and Model W bird spike strips. DO NOT use Soft Tip option forspikes installed as a climbing barrier. Installed in multiple rows, the PremiumNixalite spikes can repel the most determined climbing animals. Contact themanufacturer for installation guidelines for climbing animal barrier applications.J.Physical Security System Enhancements;Premium Nixalite All Stainless Steel Barrier Spikes can be used to enhance existingphysical perimeter security systems. Install barrier spikes on key surfaces to denyentry or egress by unauthorized personnel. For best results, install Premium barrierspikes with other physical security barriers. Use the mounting systems recommended by the manufacturer.3.5 – ADJUSTMENTS / CLEANINGA.Remove debris and waste materials from project site. Inspect finished installation.Make any adjustments needed to conform to Nixalite’s spacing and installationguidelines.B.Premium Nixalite All Stainless Steel Bird Barrier Spikes are a physical and passivebarrier. They rely on the system of pointed stainless steel wires to deny pest birdsand nuisance animals access to the surfaces on which they are installed. Periodicinspections are recommended to keep the bird spike strips in good condition.C.Occasionally, debris may fall onto the wires or birds may drop materials into the wiresin an attempt to build a nest. If this happens, begin a monthly inspection of thesystem to remove any debris and to check the condition of the installed bird spikestrips.Nixalite® of America Inc – 1025 16th Avenue – East Moline, IL. 61244 Ph:800.624.1189Fax:800.624.1196Email:************************Website: Copyright 2014 – Nixalite of America Inc Nixalite is a registered trademark of Nixalite of America IncPrinted with pride in the USA。
西安达斯科技有限公司产品说明书
4. Perform a leak test following instructions on page 7. 5. Ignite the torch according to lighting instructions. Check operation of
B20460 ECN-15100 (1007)
PAGE 11 OF 12
Maintenance Prior to each use: 1. Inspect all components of the device for damage, excessive abrasion or wear.
If the hose is cut or is more than 5 years old, it must be replaced prior to operation. 2. Verify that all connections are tight. The nozzle stem assembly should not swivel or rotate where attached to the Turbo Blast Valve Trigger, tighten any loose joints.
B20460 ECN-15100 (1007)
PAGE 12 OF 12
VENDOR TO REMOVE AREA BELOW DASHED LINE AFTER PRINTING
B20460 ECN-15100 (1007)
PAGE 1 OF 12
AXIS M4216-LV 四分辨率变焦不动瞭望头摄像头
DatasheetAXIS M4216-LV Dome CameraVarifocal4MP dome with IR and deep learningFeaturing Lightfinder,WDR,and OptimizedIR,this compact and discreet dome delivers great image quality—day and night,even in low light.A deep learning processing unit(DLPU)lets you take advantage of intelligent analytics based on deep learning on the edge.Designed to blend into any environment,it can be repainted and offers a range of accessories for discreet monitoring.Plus,it features an HDMI port and the flexibility to add audio and I/O connectivity using AXIS T61Series.Furthermore,Axis Edge Vault protects your Axis device ID and simplifies authorization of Axis devices on your network.>Great image quality in4MP>Varifocal lens with remote zoom and focus>Lightfinder,WDR,and OptimizedIR>Analytics with deep learning>HDMI output for public viewing monitorsAXIS M4216-LV Dome Camera CameraImage sensor1/2.7”progressive scan RGB CMOSLens Varifocal,3–6mm,F1.9-2.7Horizontal field of view:100°–45°Vertical field of view:72°–34°Remote focus and zoom,fixed irisDay and night Automatic IR-cut filterMinimum illumination With Lightfinder:Color:0.18lux at50IRE F2.0B/W:0.03lux at50IRE F2.0,0lux when IR illumination is onShutter speed1/37500s to1/5sCamera angle adjustment Pan±180°,tilt-40to+65°,rotation±105°Can be directed in any direction and see the wall/ceilingSystem on chip(SoC)Model CV25Memory1024MB RAM,512MB Flash ComputecapabilitiesDeep learning processing unit(DLPU) VideoVideo compression H.264(MPEG-4Part10/AVC)Main and High Profiles H.265(MPEG-H Part2/HEVC)Main and High Profiles Motion JPEGResolution2304x1728to320x240Frame rate Up to25/30fps with power line frequency50/60Hz in H.264and H.265aVideo streaming Multiple,individually configurable streams in H.264,H.265and Motion JPEGAxis Zipstream technology in H.264and H.265Controllable frame rate and bandwidthVBR/MBR H.264/H.265Low latency modeHDMIMulti-viewstreamingUp to2individually cropped out view areas in full frame rateHDMI output HDMI1080p(16:9)@25/30fps(50/60Hz)HDMI720p(16:9)@50/60fps(50/60Hz)Image settings Compression,color,brightness,sharpness,contrast,whitebalance,exposure control,motion-adaptive exposure,WDR:upto110dB depending on scene,text and image overlay,mirroringof images,privacy maskRotation:0°,90°,180°,270°,including Corridor FormatPan/Tilt/Zoom Digital PTZAudioAudio input/output Audio features through portcast technology:two-way audio connectivity,voice enhancerNetworkNetwork protocols IPv4,IPv6USGv6,ICMPv4/ICMPv6,HTTP,HTTPS,TLS,QoS Layer 3DiffServ,FTP,SFTP,CIFS/SMB,SMTP,mDNS(Bonjour),UPnP®, SNMP v1/v2c/v3(MIB-II),DNS/DNSv6,DDNS,NTP,NTS,RTSP, RTP,SRTP/RTSPS,TCP,UDP,IGMPv1/v2/v3,RTCP,ICMP,DHCP, ARP,SSH,HDMI,LLDP,CDP,MQTT v3.1.1,Link-Local address (ZeroConf)System integrationApplication Programming Interface Open API for software integration,including VAPIX®and AXIS Camera Application Platform;specifications at One-click cloud connectionONVIF®Profile G,ONVIF®Profile M,ONVIF®Profile S,and ONVIF®Profile T,specification at Event conditions Device status:above operating temperature,above or belowoperating temperature,below operating temperature,IP addressremoved,network lost,new IP address,system ready,withinoperating temperatureEdge storage:recording ongoing,storage disruptionI/O:manual trigger,virtual input,digital input via AXIS T61Audioand I/O Interfaces with portcast technologyMQTT subscribeScheduled and recurring:scheduled eventVideo:live stream openEvent actions MQTT publishNotification:email,HTTP,HTTPS,TCP and SNMP trapOverlay text,zoom preset,day/night modePre-and post-alarm video or image buffering for recording oruploadRecord video:SD card and network shareUpload of images or video clips:FTP,SFTP,HTTP,HTTPS,networkshare and emailExternal output activation via AXIS T61Audio and I/O Interfaceswith portcast technologyBuilt-ininstallation aidsRemote zoom,remote focusAnalyticsAXIS ObjectAnalyticsObject classes:humans,vehicles(types:cars,buses,trucks,bikes)Features:line crossing,object in area,crossline counting BETA,occupancy in area BETA,time in area BETAUp to10scenariosMetadata visualized with color-coded bounding boxesPolygon include/exclude areasPerspective configurationONVIF Motion Alarm eventMetadata Object data:Classes:humans,faces,vehicles(types:cars,buses, trucks,bikes),license platesAttributes:Vehicle color,upper/lower clothing color,confidence,positionEvent data:Producer reference,scenarios,trigger conditions Applications IncludedAXIS Object Analytics,AXIS Video Motion Detection,AXIS Face Detector,active tampering alarmSupportedAXIS Live Privacy ShieldSupport for AXIS Camera Application Platform enablinginstallation of third-party applications,see /acap CybersecurityEdge security Software:Signed firmware,brute force delay protection,digest authentication,password protection,AES-XTS-Plain64256bitSD card encryptionHardware:Axis Edge Vault cybersecurity platformSecure element(CC EAL6+),system-on-chip security(TEE),Axisdevice ID,secure keystore,signed video,secure boot,encryptedfilesystem(AES-XTS-Plain64256bit)Network security IEEE802.1X(EAP-TLS),IEEE802.1AR,HTTPS/HSTS,TLS v1.2/v1.3, Network Time Security(NTS),X.509Certificate PKI,IP addressfilteringDocumentation AXIS OS Hardening GuideAxis Vulnerability Management PolicyAxis Security Development ModelAXIS OS Software Bill of Material(SBOM)To download documents,go to /support/cybersecu-rity/resourcesTo read more about Axis cybersecurity support,go to/cybersecurityGeneralCasing IP42water-and dust-resistant,IK08impact-resistant,polycarbonate and aluminum casing with hard-coated domeEncapsulated electronicsColor:white NCS S1002-BFor repainting instructions of casing and impact on warranty,contact your Axis partner.Sustainability PVC free,BFR/CFR free,43%recycled plasticsPower Power over Ethernet(PoE)IEEE802.3af/802.3at Type1Class3Typical5W,max9.7WConnectors RJ4510BASE-T/100BASE-TX PoEHDMI type DAudio:Audio and I/O connectivity via portcast technologyIR illumination OptimizedIR with power-efficient,long-life855nm IR LEDsRange of reach20m(65.6ft)or more depending on the scene Storage Support for microSD/microSDHC/microSDXC cardSupport for SD card encryptionSupport for recording to network-attached storage(NAS) For SD card and NAS recommendations see Operating conditions 0°C to45°C(32°F to113°F) Humidity10–85%RH(non-condensing)Storage conditions -40°C to65°C(-40°F to149°F) Humidity5–95%RH(non-condensing)Approvals EMCCISPR24,CISPR35,EN55032Class A,EN55035,EN61000-6-1,EN61000-6-2,FCC Part15Subpart B Class A,ICES-3(A)/NMB-3(A),KC KN32Class A,KC KN35,RCM AS/NZS CISPR32Class A,VCCI Class ASafetyIEC/EN/UL62368-1,CAN/CSA C22.2No.62368-1,IS13252IEC62471EnvironmentIEC60068–2–1,IEC60068–2–2,IEC60068–2–14,IEC60068–2–27,IEC60068–2–6,IEC/EN60529IP42,IEC/EN62262IK08NetworkNIST SP500-267Dimensions Height:71mm(2.8in)ø121mm(4.76in)Weight375g(0.83lb)IncludedaccessoriesInstallation guide,Windows®decoder1-user licenseOptionalaccessoriesAXIS TM3207Recessed MountAXIS T94C01L Recessed MountAXIS T94C01U Universal MountAXIS T94C01M J-Box/Gang Box PlateAXIS M42Casing A Black4PAXIS M42Smoked Dome A4PAXIS T91A33Lighting Track MountAXIS T91A23Tile Grid Ceiling MountAXIS TM3101Pendant Wall MountAXIS Surveillance CardsFor more accessories,see VideomanagementsoftwareAXIS Companion,AXIS Camera Station and video managementsoftware from Axis Application Development Partners.For moreinformation,see /vmsLanguages English,German,French,Spanish,Italian,Russian,Japanese,Korean,Portuguese,Simplified Chinese,Traditional Chinese,Dutch,Czech,Swedish,Finnish,Turkish,Thai,Vietnamese Warranty5-year warranty,see /warrantya.Reduced frame rate in Motion JPEGKey features and technologiesAXIS Object AnalyticsAXIS Object Analytics is a preinstalled,multifeatured video analytics that detects and classifies humans,vehicles,and types of vehicles.Thanks to AI-based algorithms and be-havioral conditions,it analyzes the scene and their spatial behavior within–all tailored to your specific needs.Scal-able and edge-based,it requires minimum effort to set up and supports various scenarios running simultaneously.Axis Edge VaultAxis Edge Vault is the hardware-based cybersecurity plat-form that safeguards the Axis device.It forms the founda-tion that all secure operations depend on and offers fea-tures to protect the device’s identity,safeguard its integrity from factory and protect sensitive information from unau-thorized access.Establishing the root of trust starts at the device’s boot process.In Axis devices,the hardware-based mecha-nism secure boot verifies the operating system(AXIS OS) that the device is booting from.AXIS OS,in turn,is cryp-tographically signed(signed firmware)during the build process.Secure boot and signed firmware tie into each other and ensure that the firmware has not been tampered with during the lifecycle of the device and that the device only boots from authorized firmware.This creates an unbroken chain of cryptographically validated software for the chain of trust that all secure operations depend on. From a security aspect,the secure keystore is the crit-ical building-block for protecting cryptographic informa-tion used for secure communication(IEEE802.1X,HTTPS, Axis device ID,access control keys etc..)against mali-cious extraction in the event of a security breach.The se-cure keystore is provided through a Common Criteria and/or FIPS140certified hardware-based cryptographic comput-ing module.Depending on security requirements,an Axis device can have either one or multiple such modules,like a TPM2.0(Trusted Platform Module)or a secure element, and/or a system-on-chip(SoC)embedded Trusted Execution Environment(TEE).Signed video ensures that video evidence can be verified as untampered without proving the chain of custody of the video file.Each camera uses its unique video signing key, which is securely stored in the secure keystore,to add a sig-nature into the video stream.This allows video to be traced back to the Axis camera from where it originated,so it’s possible to verify that the footage has not been tampered with after it left the camera.To read more about Axis Edge Vault,go to /solu-tions/edge-vault.LightfinderThe Axis Lightfinder technology delivers high-resolution, full-color video with a minimum of motion blur even in near darkness.Because it strips away noise,Lightfinder makes dark areas in a scene visible and captures details in very low light.Cameras with Lightfinder discern color in low light better than the human eye.In surveillance,color may be the critical factor to identify a person,an object,or a vehicle.OptimizedIRAxis OptimizedIR provides a unique and powerful combi-nation of camera intelligence and sophisticated LED tech-nology,resulting in our most advanced camera-integrated IR solutions for complete darkness.In our pan-tilt-zoom (PTZ)cameras with OptimizedIR,the IR beam automatically adapts and becomes wider or narrower as the camera zooms in and out to make sure that the entire field of view is al-ways evenly illuminated.ZipstreamThe Axis Zipstream technology preserves all the important forensic in the video stream while lowering bandwidth and storage requirements by an average of50%.Zipstream also includes three intelligent algorithms,which ensure that rel-evant forensic information is identified,recorded,and sent in full resolution and frame rate.For more information,see /glossary©2021-2023Axis Communications AB.AXIS COMMUNICATIONS,AXIS,ARTPEC and VAPIX are registered trademarks ofAxis AB in various jurisdictions.All other trademarks are the property of their respective owners.We reserve the right tointroduce modifications without notice.T10170907/EN/M17.2/2309。
乙基硅油 SiSiB
版权所有©2012南京西斯博有机硅有限公司
聚二乙基硅氧烷
Si C 2H 5C 2H 5C 2H 5O Si C 2H 5C 2H 5O Si C 2H 5
C 2H 5C 2H 5
n 乙基硅油 （63148-61-8）工作温度范围为-60～150℃，而且温度黏度系数小，具有优良的润滑性能和介电性能。
SiSiB® EF2050乙基硅油可用作多种橡胶和塑料制品的脱模剂。
本品挥发性小、表面张力小、无毒、无腐蚀性、耐老化，并可根据使用需要，调配成不同黏度。
广泛用作电气工业的绝缘材料、精密仪器仪表油、液压油、特种润滑油等。
版权所有©2012南京西斯博有机硅有限公司
本品标准包装为210L 铁桶。
25°C 或以下储存于原始未开封容器中，本品自生产之日起保质期为一年，过期产品经化验合格后方可使用。
本说明书中所有信息是基于我们目前所掌握的知识和经验，我们保留对本说明书更正或更改其中的信息及说明的权利，恕不另行通知而不承担任何责任。
正式采用本产品这前，应先进行小型试验，以便确定最佳用量和使用条件。
我们所提供的使用建议，不得被视为侵犯任何专利权的原因。
西斯博的唯一保证，是产品满足发货时的销售规格。
若西斯博违反该保证，您所能获得的唯一补偿，仅限于退还购货价款或替换不符合保证的任何产品。
西斯博声明，不对任何间接或附带性的损害负任何赔偿责任。
维沙伊 Siliconix SiB415DK 产品文档说明书
Vishay SiliconixSiB415DKDocument Number: P-Channel 30-V (D-S) MOSFETFEATURES•Halogen-free•TrenchFET ® Power MOSFET•New Thermally Enhanced PowerPAK ®SC-75 Package- Small Footprint AreaAPPLICATIONS•Load Switch, PA Switch and Battery Switch for PortableDevicesPRODUCT SUMMARYV DS (V)R DS(on) (Ω)I D (A)a, fQ g (Typ.)- 300.087 at V GS = - 10 V - 9 3.5 nC0.158 at V GS = - 4.5 V- 7.2Notes:a.Surface Mounted on 1" x 1" FR4 board.b.t = 5 s.c.See Solder Profile (h ttp:///ppg?73257). The PowerPAK SC-75 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection.d.Rework Conditions: manual soldering with a soldering iron is not recommended for leadless components.e.Maximum under Steady State conditions is 105 °C/W.f.Based on T C = 25 °C.ABSOLUTE MAXIMUM RATINGS T A = 25 °C, unless otherwise notedParameter S ymbol Limit UnitDrain-Source Voltage V DS - 30VGate-Source VoltageV GS ± 20Continuous Drain Current (T J = 150 °C)T C = 25 °C I D- 9a A T C = 70 °C - 7.7T A = 25 °C - 4.17a, b T A = 70 °C - 3.36a, bPulsed Drain Current I DM 15Continuous Source-Drain Diode CurrentT C = 25 °C I S - 9aT A = 25 °C - 2a, b Maximum Power Dissipation T C = 25 °C P D 13WT C = 70 °C 8.4T A = 25 °C 2.4a, b T A = 70 °C 1.6a, bOperating Junction and Storage T emperature Range T J , T stg - 55 to 150°C Soldering Recommendations (Peak Temperature)c, d 260THERMAL RESISTANCE RATINGSParameter S ymbol Typical Maximum UnitMaximum Junction-to-Ambienta, e t ≤ 5 s R thJA 4151°C/WMaximum Junction-to-Case (Drain)Steady State R thJC7.59.5 Document Number: 70438Vishay SiliconixSiB415DKNotes:a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %.b. Guaranteed by design, not subject to production testing.Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.SPECIFICATIONS T J = 25 °C, unless otherwise notedParameter S ymbol Test Conditions Min.Typ.Max.UnitStaticDrain-Source Breakdown Voltage V DS V GS = 0 V, I D = - 250 µA- 30V V DS Temperature Coefficient ΔV DS /T J I D = - 250 µA - 24.2mV/°C V GS(th) Temperature Coefficient ΔV GS(th)/T J 4Gate-Source Threshold Voltage V GS(th) V DS = V GS , I D = - 250 µA - 1- 3VGate-Source LeakageI GSS V DS = 0 V , V GS = ± 20 V ± 100 nAZero Gate Voltage Drain Current I DSS V DS = - 30 V , V GS = 0 V - 1µA V DS = - 30 V , V GS = 0 V, T J = 55 °C- 10On-State Drain Current aI D(on) V DS ≤ 5 V , V GS = - 10 V 5A Drain-Source On-State Resistance a R DS(on) V GS = - 10 V, I D = - 4.17 A 0.0720.087ΩV GS = - 4.5 V , I D = - 3.1 A 0.1300.158Forward T ransconductance a g fsV DS = - 15 V , I D = - 4.17 A5.5SDynamic bInput Capacitance C iss V DS = - 15 V , V GS = 0 V , f = 1 MHz295pFOutput CapacitanceC oss 70Reverse Transfer Capacitance C rss 50Total Gate Charge Q g V DS = - 15 V , V GS = - 10 V, ID = - 4.17 A 6.710.05nC V DS = - 15 V , V GS = - 4.5 V , I D = - 4.17 A 3.5 5.25Gate-Source Charge Q gs 1Gate-Drain Charge Q gd 1.78Gate Resistance R g f = 1 MHz9.4ΩTurn-On Delay Time t d(on) V DD = - 15 V , R L = 6.07 ΩI D ≅ - 2.47 A, V GEN = - 4.5 V , R g = 1 Ω4364.5ns Rise Timet r 5582Turn-Off Delay Time t d(off) 1319.5Fall Timet f 1015Turn-On Delay Time t d(on) V DD = - 15 V , R L = 3.6 ΩI D ≅ - 4.17 A, V GEN = - 10 V , R g = 1 Ω69Rise Timet r 8.512.75Turn-Off Delay Time t d(off) 1421Fall Timet f913.5Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current I S T C = 25 °C- 9A Pulse Diode Forward Current I SM 15Body Diode VoltageV SD I S = - 3.2 A, V GS = 0 V- 0.8- 1.2V Body Diode Reverse Recovery Time t rr I F = - 3.2 A, di/dt = 100 A/µs, T J = 25 °C14.6322ns Body Diode Reverse Recovery Charge Q rr 812nC Reverse Recovery Fall Time t a 9.13nsReverse Recovery Rise Timet b5.5Document Number: Vishay SiliconixSiB415DKTYPICAL CHARACTERISTICS 25°C, unless otherwise notedOn-Resistance vs. Drain Current and Gate VoltageGate ChargeTransfer CharacteristicsCapacitanceOn-Resistance vs. Junction Temperature Document Number: 70438Soure-Drain Diode Forward VoltageThreshold VoltageOn-Resistance vs. Gate-to-Source VoltageDocument Number: Vishay SiliconixSiB415DKTYPICAL CHARACTERISTICS 25°C, unless otherwise noted* The power dissipation P D is based on T J(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit.Current Derating*Power Derating Document Number: 70438Vishay SiliconixSiB415DKTYPICAL CHARACTERISTICS 25°C, unless otherwise notedVishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for SiliconTechnology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see /ppg?70438.Normalized Thermal Transient Impedance, Junction-to-AmbientNormalized Thermal Transient Impedance, Junction-to-CaseVishay SiliconixPackage InformationDocument Number: PowerPAK ® SC75-6LDIMSINGLE PADDUAL PADMILLIMETERSINCHES MILLIMETERSINCHESMinNom Max Min Nom Max Min Nom Max Min Nom Max A 0.6750.750.800.0270.0300.0320.6750.750.800.0270.0300.032A10-0.050-0.0020-0.050-0.002b 0.180.250.330.0070.0100.0130.180.250.330.0070.0100.013C 0.150.200.250.0060.0080.0100.150.200.250.0060.0080.010D 1.53 1.60 1.700.0600.0630.067 1.53 1.60 1.700.0600.0630.067D10.570.670.770.0220.0260.0300.340.440.540.0130.0170.021D20.100.200.300.0040.0080.012E 1.53 1.60 1.700.0600.0630.067 1.53 1.60 1.700.0600.0630.067E1 1.00 1.10 1.200.0390.0430.0470.510.610.710.0200.0240.028E20.200.250.300.0080.0100.012E30.320.370.420.0130.0150.017e 0.50 BSC 0.020 BSC 0.50 BSC 0.020 BSC K 0.180 TYP 0.007 TYP 0.245 TYP 0.010 TYP K10.275 TYP 0.011 TYP 0.320 TYP 0.013 TYP K20.200 TYP 0.008 TYP 0.200 BSC0.008 TYPK30.255 TYP 0.010 TYP K40.300 TYP 0.012 TYP L 0.150.250.350.0060.0100.0140.150.250.350.0060.0100.014T0.030.080.130.0010.0030.005ECN: C-07431 − Rev. C, 06-Aug-07DWG: 5935Application Note 826Vishay SiliconixA P P L I C A T I O N N O T ERECOMMENDED PAD LAYOUT FOR PowerPAK ® SC75-6L SingleReturn to IndexLegal Disclaimer Notice VishayDisclaimerALL PRODU CT, PRODU CT SPECIFICATIONS AND DATA ARE SU BJECT TO CHANGE WITHOU T NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.Material Category PolicyVishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant.Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.Revision: 02-Oct-121Document Number: 91000。
Vail 100 前面车灯 材料号 51252538-14说明书
Instrucciones de uso Faros delanterosVail 100Art.-Nr. 51252538-141. Introducción Enhorabuena por la adquisición de su nuevo producto. Con su compra ha elegido un producto de gran calidad. Las instrucciones de uso forman parte de este producto, ya que contienen información importante sobre la segu-ridad, el montaje y la forma de desechar el producto. Antes de utilizar el producto, familiarícese con las instruc-ciones de uso y las advertencias de seguridad. Utilice el producto únicamente como se describe a continuación y para las aplicaciones indicadas. En caso de entregar el producto a terceros, adjunte también toda la documentaci-ón.2. ContenidoVail 100 Foco de atención • 1 x Vail 100 Foco de atención • 1 x faro de soporte• 1 x cable de carga USB C• 1 x manual de instrucciones de montaje y manejo4. Uso adecuado- El producto está destinado exclusivamente al uso en bicicletas y sirve para iluminar la carretera.- Este faro está homologado como única luz en todas las bicicletas de acuerdo con el StVZO vigente.- El producto está destinado a ser utilizado en el exterior.5. Advertencias de seguridad- No mire al faro.- No apunte el faro directamente a personas o animales.- El cono luminoso del faro debe apuntar siempre en línea recta en el sentido de la marcha.- El faro debe ajustarse de manera que no deslumbre a los demás usuarios de la carretera.- La distribución de la luz no debe quedar oculta, ni siquiera parcialmente.- La batería debe cargarse inmediatamente cuando se active el dispositivo de control.- El LED no es reemplazable. Si el LED falla, hay que sustituir toda la luminaria.- No cargue nunca las luminarias sin vigilancia.- Nota: Las bombillas LED y las baterías no son reemplazables.6. ¡ADVERTENCIA! ¡PELIGRO MORTAL Y DE ACCI- DENTES PARA BEBÉS Y NIÑOS!No deje nunca a los niños solos sin vigilancia alguna con el material del embalaje, ya que existe riesgo de asfixia por ingestión accidental de elemen- tos del embalaje. Los niños no suelen ser conscientes de los peligros. Man-tenga siempre el producto fuera del alcance de los niños. ¡Este producto no es ningún juguete! Este producto puede ser utilizado por niños mayores de 8 años, así como por personas con capacidades físicas, sensoriales o mentales reducidas o con falta de experiencia y/o conocimientos, siempre y cuando se les haya enseñado cómo utilizar el producto de forma segura y hayan com- prendido los peligros derivados de su uso. No deje que los ni-ños jueguen con el producto. Las labores de limpieza y mantenimiento no pueden ser efectuadas por niños sin la supervisión de un adulto. Nunca desmonte el producto. Una reparación inadecuada del producto podría suponer un riesgo considerable para el usuario. Encargue las reparaciones únicamente a personal técnico cualificado. No es posible cambiar la(s) bombilla(s) LED ni la batería.7. Advertencias de seguridad sobre baterías¡CUIDADO! ¡PELIGRO DE EXPLOSIÓN!Mantenga las baterías fuera del alcance de los niños, no las arroje al fuego, las cortocircuite o las abra.Si no tiene en cuenta esta advertencias, las baterías podrían descargarse por debajo de su tensión final. En este caso, existe el riesgo de que se sulfaten. Evite el contacto con la piel, los ojos y las mucosas si el líquido de las baterías se hubiera derramado. En caso de entrar en contacto con el ácido de las pilas, lave inmediatamente la zona afectada con abundante agua y consulte a un médico.8. Montaje8.1 Montaje del faro9. Producto de ajuste9.1 Ajuste del faro delanteroAlinee el faro de forma que el cono de luz llegue a la carretera a unos 10 metros por delante de la rueda (véase la ilustración). ¡Atención! Compruebe regularmente el ajuste correcto y la altura de montaje de su faro. El faro debe montarse en un rango de 400 a 1200 mm por encima de la superficie de la carretera.10. OperaciónPulsar por primera vez - Modo de potencia (aprox. 100 lx).Pulsar por segunda vez - Modo alto (aprox. 70 lx)Pulsar por tercera vez - Modo medio (aprox. 40 lx)Pulsar por cuarta vez - Modo Eco (aprox. 15 lx)Pulsar cinco veces - Volver al modo de encendido (ver Pulsar por primera vez).menos 30 minutos.11. Explicación Indicador del nivel de carga de la bateríaCada LED del indicador del nivel de carga de la batería representa el 25% de la capacidad de carga disponible.4 LEDs verdes encendidos significa que la batería está completamente cargada.1 LED verde encendido, significa que la batería tiene como máximo un 25% de capacidad restante.1 LED rojo parpadeando significa que la batería todavía tiene aproximadamente un 10% de capacidad restante y necesita ser recargada.12. Explicación de la pantalla del modo de funcionamientoLa indicación del modo de funcionamiento consta de cuatro LEDs azules.El último/último LED se enciende en modo Eco.Los 2 LED inferiores se encienden en modo Medio.Los 3 LED inferiores se encienden en modo Alto.Los 4 LEDs se iluminan en el modo Power.13. Carga de la bateríaun ordenador.hecho.A continuación, conecta el conector a una toma de corriente.En cuanto la batería esté completamente cargada, podrás volver a utilizar la luz.14. Limpieza y mantenimientoApague el producto antes de limpiarlo. Nunca sumerja el producto completamente en agua. No utilice productos de limpieza corrosivos o abrasivos. Esto causará daños. Utilice un paño seco sin pelusas para limpiar y mantener cuidado el producto. Para la suciedad más persistente, utilice un paño ligeramente humedecido.15. Información medioambientalSi las luminarias se eliminan de forma inadecuada, se pierden valiosos recursos debido a las baterías recarga-bles que contienen, y los contaminantes que contienen pueden suponer un riesgo considerable para la salud y el medio ambiente. La recogida/eliminación por separado de las pilas y baterías usadas evita riesgos para la salud y el medio ambiente y se recuperan valiosas materias primas a través del reciclaje.El envase está fabricado con materiales respetuosos con el medio ambiente que puede desechar en los puntos de reciclaje locales.En aras de la protección del medio ambiente, no tire el producto a la basura doméstica cuando haya llegado al final de su vida útil, sino que deséchelo adecuadamente. Puede informarse sobre los puntos de recogida y sus horarios de apertura en su administración local.Para obtener información sobre cómo deshacerse de su producto usado, póngase en contacto con su autoridad local o ayuntamiento. Las pilas/acumuladores defectuosos o usados deben reciclarse de acuerdo con la Directiva 2006/66/CE y sus modificaciones. Devuelva las pilas/acumuladores y/o el aparato a través de las instalaciones de recogida previstas.16. Daños al medio ambiente debido a la eliminación incorrecta de las pilas recargables.Las pilas recargables no deben eliminarse con la basura doméstica. Pueden contener metales pesados tóxicos y están sujetos a un tratamiento especial de residuos. Los símbolos químicos de los metales pesados son los siguientes: Cd = cadmio, Hg = mercurio, Pb = plomo.Por lo tanto, entregue las pilas usadas en un punto de recogida municipal.Si las pilas se eliminan de forma inadecuada, se pierden valiosos recursos y los contaminantes que contienen pueden suponer un riesgo considerable para la salud y el medio ambiente.Al recoger/eliminar las pilas usadas por separado, se evitan los riesgos para la salud y el medio ambiente y se recuperan valiosas materias primas mediante el reciclaje.17. GarantíaEstimado cliente,Este producto tiene una garantía de dos años a partir de la fecha de compra. En caso de defectos en este produc-to, usted tiene derechos legales contra el vendedor del producto. Estos derechos legales no están limitados por nuestra garantía establecida a continuación.18. Condiciones de la garantíaEl periodo de garantía comienza el día de la fecha de compra del producto. Guarde el tique de compra original. Ese tique es necesario como justificante de compra. Si en el plazo de dos años a partir de la fecha de compra de este producto, se detectara o produjera algún defecto de material o de fabricación, repararemos o sustituiremos (según nuestra elección) el aparato de forma gratuita. Este servicio de garantía pre- supone la presentación dentro del plazo de dos años del aparato defectuoso y del justificante de compra (tique de compra) junto con una breve descripción del fallo y el momento en el que se produjo. Si nuestra garantía cubre el defecto, recibirá de nuevo el producto reparado o uno nuevo. La reparación o sustitución del producto no implica la ampliación del plazo de garantía. El hecho de hacer uso de la garantía no implica la prolongación del periodo de su validez. Esto también es aplicable a las piezas sustituidas y reparadas. Los daños y defectos eventualmente existentes en elmomento de la compra se deberán comunicar de inmediato tras desembalar el pro- ducto. Las posibles reparacio-nes que se realicen terminado el periodo de garantía correrán a cargo del cliente.19. Cobertura de la garantíaEl producto se ha fabricado cuidadosamente según estrictas directrices de calidad y se ha probado concienzuda-mente antes de su entrega. La garantía se aplica a los defectos de material o de fabricación. Esta garantía no cu-bre las piezas del producto sujetas a un desgaste normal y que, por lo tanto, pueden considerarse piezas de des-gaste o por daños en piezas frágiles, por ejemplo, interruptores, baterías o que sean de vidrio. Esta garantía no es válida si el producto ha sido dañado, utilizado o mantenido incorrectamente. Para un uso adecuado del producto, deben seguirse estrictamente todas las instrucciones del manual de usuario. Deben evitarse a toda costa los usos y acciones desaconsejados o advertidos en las instrucciones de uso. El producto está destinado únicamente a un uso privado y no a un uso comercial. El mal uso y la manipulación inadecuada, el uso de la fuerza y las interven-ciones no realizadas por nuestro servicio técnico autorizado invalidarán la garantía. Para garantizar una rápida tramitación de su solicitud, siga las siguientes instrucciones: Para todas las consultas, tenga a mano el recibo y el número de artículo como prueba de compra. Consulte la placa de características o la portada de este manual de instrucciones para conocer el número de artículo. En caso de que se produzcan errores de funcionamiento u otros defectos, póngase primero en contacto con el departamento de servicio técnico mencionado a continuación por teléfono o por correo electrónico. Si un producto resulta defectuoso, puede enviarlo a portes pagados a la dirección de servicio que se le ha facilitado, adjuntando el recibo e indicando cuál es el defecto y cuándo se ha producido. Por favor, tenga en cuenta que el departamento de servicio debe ser informado antes del envío.20. ProductoModelo: Vail 10020.1 Características del producto faro Duración de la luz: a unos 100 lx unos 150 min. a aprox. 70 lx aprox. 200 min. a aprox. 40 lx aprox. 300 min. a aprox. 15 lx aprox. 1200 min.Capacidad de la batería: 2000 mAh Tensión nominal: 3,7 V21. Servicio + proveedorBüchel GmbH & Co. Fahrzeugteilefabrik KG Niesiger Straße 115 DE-36039 FuldaTel. +49 (0)661/9595-0 ***********************ESESES12314。
理光基士得耶油墨蜡纸型号表
125
45
JP-14油墨
理光JP785C/DX3440C
45
15
理光DX3442
理光DX3442版纸/DX3442油墨
280
120
G11/HQ-40
CP6450C/DX4542C
370
DX2430版纸
理光DX2430C
120元
45元
DX2430油墨
理光DX2430C理光DX3442油墨
265
110
CP17油墨
G5300/5425C
50
15
G4A3版纸
G5428C
380
135
CPT3油墨
G5428C
50
15
T13A3版纸
G5450
CPT5油墨
G5450
50
15
G5版纸
G5410C
125
45
CPT5油墨
G5410C
50
15
G55版纸
基士得耶CP6200C/基士得耶6300
125
50
CPT7油墨
理
光
系
列
版纸型号
适用机型
原装
进口
VT版纸
VT2005/2100/2210/2200/2300/2500/1120/2400/2240
1580/1650/2250/2620/2820/2950/1220/1320
285
110
VT600油墨
VT2005/2100/2210/2200/2300/2500/1120/2400/2240
40
15元
DX2432C版纸
理光DX2432C
BPS4000产品规格说明书
1 2 3 4 5 6 7 8 9Specification StatusChange Made atBPS4000 revRev revDate Attachments Org Title supersededBy specialNotes latestSupersedingDoc reviewBy 160-006AM040322BHTI Alternate Materials List M&P 299-947-100-690115BHTI Procurement Specification for Epoxy Adhesive, Heat Resistant M&P 299-947-320-820507BHTIAdhesive Film and Primer System, Intermedite Cure Temperature (260-290º F) ServiceTemerature 67-225º F)M&P 68A900000G011101BAC Finish Spec:F-15M&P 74A900000E990308BAC Finish Specification for F18 Aircraft M&P 74A900004L010501BAC Ctrl:Fract Crit Parts, F-18M&P 74A901001F981208BAC Std Finish Codes:F-18 A\C M&P 901-947-002CA D950510BHTI Finish Specification for the V-22 Aircraft (Bell Boeing) Model 901) EMD Aircraft M&P10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26A-A-208B951120Notice 2 Notice 3FED Ink, Marking, Stencil, Opaque M&P A-A-2962Cancelled no s/s spec A980810canc notice 2-060106FED Commercial Item Description Enamel, Alkyd, Exterior, Solvent Based, Low Voc ok to use canc spec M&P A-A-3097BK-970506Notice 3FEDCommercial Item Description Adhesives, Cyanoacrylate, Rapid Room Temperature-Curing,SolventlessM&P A-A-3165CA A071116Notice 2FED Lacquer, Gloss, for A/C Use M&P A-A-52080B980523Notice 1FED Tape, Lacing, and Tying, Nylon M&P A-A-52081B980523FED Tape, Lacing, and Tying, Polyester M&P A-A-52082CE C070904Notice 1FED Tape, Lacing and Tying, TFE-Fluorocarbon M&P A-A-52083BJ C040223FED Tape, Lacing, and Tying, Glass M&P A-A-52084B980523Notice 1FED Tape, Lacing and Tying, Aramid M&P A-A-55829-970204Notice 1DLA Acetic Acid, Glacial, Technical M&P A-A-56032CN D030521Notice 1FED Commercial Item Description (CIDS) Ink, Marking, Epoxy Base M&P A-A-59126-970926FED Terminals, Feedthru (Insulated) and Terminals, Stud (Insulated and Noninsulated)ENG A-A-59132CR A100607Validation Notice 1DLA Amyl Acetate, Technical M&P A-A-59135CR-971028FED Commercial Item Description Packaging Material, Sheet M&P A-A-59136CR-971028FED Cushioning Material, Packaging, Closed Cell Foam Plank M&P A-A-59178CL A041012USGOVT Nipple, Electrical Terminal ENG A-A-59503CG B081020FED Commercial Item Description Nitrogen, Technical M&P A A59551Wire Electrical Copper(Uninsulated)27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44A-A-59551CP A091022USGOVT Wire, Electrical, Copper (Uninsulated) M&P A-A-59569CK C090122DLA Qualification Sampling and Testing of Steels for Transverse Tensile Properties ENG A-A-59588BK A050707FED Commercial Item Description Rubber, Silicone M&P A-A-59877CT-100909FED Comemrcial Item Description Insulating Compound, Electrical, Embedding M&P AIR4127CG - 071101SAE Steel: Chemical Composition and Hardenability M&P AISI-1010Unavailable-AISI Low Carb Stl Unavailable M&P AISI-50100Unavailable-AISI Bearing Stl Unavailable M&P AISI-52100Unavailable-AISI Bearing Stl Unavailable M&P AISI-B-1112Unavailable-AISI Low Carb Free Mach Stl Unavailable M&P AISI-C-1212Unavailable-AISI Matl Spec, Stl Unavailable M&P AISI-C-1213Unavailable-AISI Low Carb Free Mach Stl Unavailable M&P AISI-C-1214Unavailable-AISI Matl Spec, Stl Unavailable M&P AMS 2175CR A100601SAE Castings, Classification and Inspection of M&PAMS 2201Cancelled CN Can940901SAETolerances Aluminum and Aluminum Alloy Bar, Rod, Wire, and Forging Stock Rolled or Cold-FinishedANSI H35.2M&PAMS 2221G060201SAE Tolerances, Copper and Copper Alloy Bars and Rods M&P AMS 2222BG J060201SAE Tolerances, Copper and Copper Alloy Sheet, Strip, and Plate M&P AMS 2223BF H060201SAE Tolerances Copper and Copper Alloy Seamless Tubing M&P AMS 2224G060201SAE Tolerances Copper and Copper Alloy Wire M&P AMS2241Tolerances,Corrosion and Heat-Resistant Steel,Iron Alloy,Titanium,and Titanium Alloy Bars and45 46 47 4849 50 51 52 53 54 55 56 57 58AMS 2241CN R070701SAETolerances, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars andWireM&P AMS 2242CC G080604SAETolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium and Titanium Alloy Sheet,Strip and PlateM&P AMS 2243BJ H060501SAE Tolerances Corrosion and Heat-Resistant Steel Tubing M&P AMS 2248CN F060501SAEChemical Check Analysis Limits Corrosion and Heat-Resistant Steels and Alloys, Maraging andother Highly-Alloyed Steels, and Iron AlloysM&PAMS 2249CN G090701SAEChemical Check Analysis Limits Titanium and Titanium AlloysM&PAMS 2259CN E071201SAE Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels M&P AMS 2269CN F060501SAE Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys M&P AMS 2300BF K031001SAE Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure M&P AMS 2301CT K100801SAE Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure M&P AMS 2303CT F100801SAESteel Cleanliness, Aircraft Quality, Martensitic Corrosion Resistant Steels Magnetic ParticleInspection ProcedureM&P AMS 2304CN A060301SAE Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure M&P AMS 2310BE F060201SAE Qualification Sampling and Testing of Steels for Transverse Tensile Properties M&P AMS 2315CN F080101SAE Determination of Delta Ferrite Content M&PAMS 2350Cancelled no s/s spec CN BA891001SAEStandards and Test Methodsok to use canc spec M&P1Specification Status Change Made atBPS4000 revRev revDate Attachments Org Title supersededBy specialNotes latestSupersedingDoc reviewBy59 60 61 62 63 64AMS 2355CN J090701SAEQuality Assurance Sampling and Testing Aluminum Alloys and Magnesium Alloy WroughtProducts (Except Forging Stock), and Rolled, Forged, or Flash Welding RingsM&P AMS 2360CN D070701SAE Room Temperature Tensile Properties of Castings M&P AMS 2370CN J071101SAEQuality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products andForging StockM&P AMS 2371CN H071101SAEQuality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys WroughtProducts and Forging StockM&P AMS 2372CN E070601SAE Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings M&P AMS 2375CN D070601SAE Control of Forgings Requiring First Article Approval M&PA l d C t l f P i Q lit Tit i All65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82AMS 2380CN F080601SAE Approval and Control of Premium-Quality Titanium Alloys M&P AMS 2400BV W070701SAE Plating, Cadmium M&P AMS 2401CN H071101SAE Plating, Cadmium Low Hydrogen Content Deposit M&P AMS 2403BM L041001SAE Plating, Nickel General Purpose M&P AMS 2404CH F081201SAE Plating, Electroless Nickel M&P AMS 2405Noncurrent CN C841010SAE Electroless Nickel Plate, Low Phosphorous M&P AMS 2406BV L070501SAE Plating, Chromium Hard Deposit M&P AMS 2408CF J081101SAE Plating, Tin M&P AMS 2410CR K100401SAE Plating, Silver Nickel Strike, High Bake M&P AMS 2411CB G080201SAE Plating, Silver for High Temperature Applications M&P AMS 2412CN J091201SAE Plating, Silver Copper Strike, Low Bake M&P AMS 2416K040301SAE Plating, Nickel-Cadmium Diffused M&P AMS 2417G040701SAE Plating, Zinc-Nickel Alloy M&P AMS 2418G060101SAE Plating, Copper M&P AMS 2419BM C030501SAE Plating, Cadmium-Titanium M&P AMS 2420D021201SAE Plating of Aluminum for Solderability Zinc Immersion Pre-Treatment Process M&PAMS 2423**See special notes CE D020401SAE Plating, Nickel Hard DepositContinue to use AMS-QQ-N-290 for Class2 NickelM&PAMS 2424CR F100401SAE NI Plate, Low Stressed Deposit M&P AMS2426D Coating Cadmium Vacuum Deposition83 84 85 86 87 88 89 90 91 92 93 94AMS 2426BT020901SAE Coating, Cadmium Vacuum Deposition M&P AMS 2429C011101SAE Bronze Plate Masking M&P AMS 2430CN R100101SAE Shot Peening, Automatic M&P AMS 2433C041001SAE Plating, Nickel-Thallium-Boron or Nickel-Boron M&P AMS 2434CN C060501SAE Plating, Tin-Zinc Alloy M&P AMS 2435Noncurrent CN G070601SAE Coating, Tungsten Carbide-Cobalt Coating, Detonation Process M&P AMS 2437BN C710111SAE Coating, Plasma Spray Deposition M&P AMS 2438CL D090701SAE Plating, Chromium Thin, Hard, Dense Deposit M&P AMS 2444BM A001201SAE Coating, Titanium Nitride Physical Vapor Deposition M&P AMS 2451BN B060501SAE Plating, Brush General Requirements M&PAMS 2460See special notes CA-070701SAE Plating, ChromiumIf dwg requires chrome plate per AMS-QQ-C-320 then stress relief and embritlmnt(emb) bake relief per BPS4620. If dwg req'schrome plate per AMS 2460 then stressrelief and bake relief per AMS 2460 unlessthe dwg specifically req's BPS 4620M&PAMS 2468Cancelled CN G981001SAE Hard Anodic Coating Treatment of Aluminum Alloys AMS 2469M&P AMS 2469CG H080701SAEHard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and PerformanceRequirementsM&P95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111qAMS 2470CN M070401SAE Anodic Treatment of Aluminum Alloys Chromic Acid Process M&P AMS 2471CN G081201SAE Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating M&P AMS 2481CP J100201SAE Phosphate Treatment Antichafing M&PAMS 2482CN D100101SAEHard Anodic Coating on Aluminum Alloys Polytetrafluoroethylene (PTFE)-Impregnated orCodepositedM&PAMS 2485BY K080101SAE Coating, Black Oxide M&P AMS 2486CR E100501SAE Conversion Coating of Titanium Alloys Fluoride-Phosphate Type M&P AMS 2487CN A000301SAE Anodic Treatment of Titanium and Titanium Alloys Solution pH 12.4 Maximum M&P AMS 2488D000606SAE Anodic Tr:Ti,Ti Alys M&P AMS 2515BM E900101SAE Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 to 400 °C (698 to 752 °F) Fusion M&P AMS 2516BM D900101SAE Polytetrafluoroethylene (PTFE) Resin Coating High Build, 370 to 400 °C (698 to 752 °F) Fusion M&P AMS 2525C030401SAE Graphite Coating, Thin Lubricating Film Impingement Applied M&P AMS 2526BW C071001SAE Molybdenum Disulfide Coating, Thin Lubricating Film Impingement Applied M&P AMS 2615BM F060901SAE Pressure Testing Hydraulic Pressure as Specified M&P AMS 2630CR C100101SAE Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick M&P AMS 2631CN C090701SAE Ultrasonic Inspection Titanium and Titanium Alloy Bar and Billet M&P AMS 2632BN A950301SAEInspection, Ultrasonic, Of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-SectionalThicknessM&P1Specification Status Change Made atBPS4000 revRev revDate Attachments Org Title supersededBy specialNotes latestSupersedingDoc reviewBy112 113 114 115 116 117 118 119 120AMS 2635Cancelled Can810701SAE Radiographic Insp ASTM E1742M&P AMS 2640Cancelled CH Can960401SAE Magnetic Particle Inspection ASTM E1444M&P AMS 2645Cancelled CH Can950201SAE Fluorescent Penetrant Inspection ASTM E1417M&P AMS 2649CA C080101SAE Etch Inspection of High Strength Steel Parts M&P AMS 2658CN C091001SAE Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts M&P AMS 2664CH F950701SAE Brazing, Silver For Use Up to 800 °F (427 °C)M&P AMS 2665G030101SAE Brazing, Silver for Use up to 400 °F (204 °C)M&P AMS 2666Cancelled Can840101SAE Ag Braz,High Temp AMS 2664M&P AMS 2670BK J060601SAE Brazing, Copper M&P121 122 123 124 125 126 127 128 129 130 131 132 133 134135AMS 2671Cancelled CH Can920101SAE Copper Brazing Corrosion and Heat Resistant Steels and Alloys AMS 2670M&P AMS 2672BM F010301SAE Brazing, Aluminum Torch or Furnace M&P AMS 2673BM D010301SAE Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip)M&P AMS 2675G020501SAE Brazing, Nickel Alloy Filler Metal M&P AMS 2680C010601SAE Electron--Beam Welding for Fatigue Critical Applications M&P AMS 2681B000301SAE Electron Beam Welding M&P AMS 2685Noncurrent CP E071001SAE Welding, Tungsten Arc, Inert Gas GTAW Method M&P AMS 2689Noncurrent CH A980201SAE Fusion Welding Titanium and Titanium Alloys M&P AMS 2694BR B070201SAE In-Process Welding of Castings M&PAMS 2700CF C081101SAE Passivation of Corrosion Resistant SteelsIf no Method & Type are specified must useMethod 1, Type 2,6,7 or 8 depending on thebase material. All acceptance testing shallbe per Class 4.M&PAMS 2728BM A050301SAE Heat Treatment of Wrought Copper Beryllium Alloy Parts M&P AMS 2745CJ A071201SAE Induction Hardening of Steel Parts M&P AMS 2750BN D050901SAE M&P AMS 2753CF C080801SAE Liquid Salt Bath Ferritic Nitrocarburizing Non-Cyanide Bath M&P AMS 2755Cancelled CM Can090701SAE Nitriding, Molten Salt BathProcess not available, consider AMS 2753as replacementM&P136137 138 139140 141 142 143 144 145as replacement.AMS 2759CE E081001SAE Heat Treatment of Steel Parts General Requirements M&P AMS 2759/1CJ E090201SAEHeat Treatment of Carbon & Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517Mpa)Supersedes MIL-H-6875 for carbon & low-alloy steels below 220 KSIM&P AMS 2759/10CN A060601SAE Automated Gaseous Nitriding Controlled by Nitriding Potential M&P AMS 2759/11BW-050401SAE Stress Relief of Steel Parts M&P AMS 2759/2CR F100501SAE Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 Mpa) and HigherSupersedes MIL-H-6875 for low-alloysteels, 220 KSI & higher M&P AMS 2759/3CE E080801SAE Heat Treatment Precipitation-Hardening Corrosion-Resistant & Maraging Steel PartsSupersedes MIL-H-6875 for precipitationhardening & maraging steelM&P AMS 2759/4CA C080301SAE Heat Treatment Austenitic Corrosion-Resistant Steel PartsSupersedes MIL-H-6875 for austenticsteelsM&P AMS 2759/5D040601SAE Heat Treatment Martensitic Corrosion Resistant Steel PartsSupersedes MIL-H-6875 for martensiticsteelsM&P AMS 2759/6BM B051101SAE Gas Nitriding & Heat Treatment of Low - Alloy Steel Parts Use Standard Drawing Notes per BDS2240M&P AMS 2759/7CT B100501SAE Carburizing and Heat Treatment of Carburizing Grade Steel Parts M&P1. Infrared pyrometry may be used to146 147 148 149 150 151 152 153 154 155 156AMS 2759/8CG A070601See Special Notes SAE Ion Nitridingmeasure temperature. 2. The nitridingtemperature may be less than 50 degreesbelow the tempering or aging temperatureprovided that the core hardness is notreduced. 3. For small loads, a minimum oftwo acceptance testing specimens may beused in lieu of four, provided that at leastone specimen is placed in each layer.M&P AMS 2759/9CL D090501SAE Hydrogen Embrittlement Relief (Baking of Steel Parts)Supersedes MIL-H-6875 for stress relievingsteelsM&P AMS 2762Noncurrent CP B020101SAE Carburizing Carbon and Low-Alloy Steel Parts M&P AMS 2768CR C100701SAE Heat Treatment of Magnesium Alloy Castings M&P AMS 2770BJ H060801SAE Heat Treatment of Wrought Aluminum Alloy Parts M&P AMS 2771C040701SAE Heat Treatment of Aluminum Alloy Castings M&P AMS 2772BY E080201SAE Heat Treatment of Aluminum Alloy Raw Materials M&P AMS 2774CG B080801SAE Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts M&P AMS 2800CN D060801SAE Identification Finished Parts M&P AMS 2801B030301SAE Heat Treatment of Titanium Alloy Parts M&P AMS 2807CF B080201SAEIdentification Carbon and Low-Alloy Steels, Corrosion and Heat-Resistant Steels and Alloys Sheet,Strip, Plate and Aircraft TubingM&P1Specification Status Change Made atBPS4000 revRev revDate Attachments Org Title supersededBy specialNotes latestSupersedingDoc reviewBy157 158 159 160161162AMS 3025CN C090901SAE Polyalkylene Glycol Heat Treat Quenchant M&P AMS 3106Cancelled Can830401SAE Primer, Adhesive,Corr Inhib AMS 3107M&P AMS 3107A910401SAE Primer, Adhesive,Corr-Inhibiting M&P AMS 3195E920101SAE Silicone Rubber Sponge M&PAMS 3216G050901SAE Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80M&P AMS 3218C050901SAE Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 85 to 95M&P AMS3276Sealing Compound,Integral Fuel Tanks and General Purpose,Intermittent Use to360°F(182°C)163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180AMS 3276CB E080301SAE Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 F (182 C)M&PAMS 3301G900401SAE Silicone Rubber, Gen Purp,35-45M&P AMS 3305H900401SAE Silicone Rubber, Gen Purp,75-85M&P AMS 3374C050701SAE Sealing Compound Aircraft Firewall M&P AMS 3410J981001SAE Flux,Ag Braz M&P AMS 3411D981001SAE Flux Silver Brz, High Temp M&P AMS 3644BL G060901SAE Plastic: Polyimide For Molded Rod, Bar, and Tube, Plaque, and Formed Parts M&P AMS 3645CN C010101SAE Polychlorotrifluoroethylene (PCTFE), Compression Molded Heavy Sections, Unplasticized M&P AMS 3650CN C910101SAE Rods, Sheets, and Molded Shapes, Polychlorotrifluoroethylene (PCTFE) Unplasticized M&P AMS 3651Cancelled Can870401SAE Ptfe AMS 3667M&P AMS 3651Cancelled Can870401Ptfe AMS 3652M&P AMS 3651Cancelled Can870401Ptfe AMS 3656M&P AMS 3651Cancelled Can870401Ptfe AMS 3660M&P AMS 3652C930101SAE Ptfe Film,Non-Crit Grade M&P AMS 3656CT G080301SAE Ptfe Extrusions,Norm Strength, As Sintered M&P AMS 3657CC D080301SAE Ptfe, Extrusions, Premium M&P AMS 3658CC D080301SAE Ptfe, Extrusions, Premium M&PAMS 3659CR E100501SAE Polytetrafluoroethylene (PTFE) Extrusions, Premium Strength, Sintered and Stress-Relieved M&P AMS3660D100601Polytetrafluoroethylene Moldings M&P181 182 183 184 185 186 187 188 189190191192193194AMS 3660CR SAE Polytetrafluoroethylene MoldingsAMS 3666D930701SAE Ptfe Sht, Glass Reinforced M&P AMS 3667CA D080301SAE Polytetrafluorethylene Sheet, Molded General Purpose Grade, As Sintered M&P AMS 3668CT D100501SAE Ptfe, Moldings, Premium Grade, A Sintered M&P AMS 3670/1B950401SAE Unfilled Polyamide-Imide, Bar M&P AMS 3824CN C950901SAE Cloth, Glass Finished for Resin Laminates M&P AMS 4001Cancelled CK Can070701SAE Aluminum Sheet and Plate 0.12Cu (1100-0) Annealed ASTM B209M&P AMS 4013CN F070501SAE Aluminum Sheet, Laminated Surface Bonded M&P AMS 4015CN L070201SAE Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-0) Annealed M&PAMS 4016CN L060901SAEAluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-H32) Strain Hardened, Quarter Hard, andStabilizedM&P AMS 4017CN K041201SAEAluminum Alloy Sheet and Plate 2.5Mg - 0.25Cr (5052-H34) Strain-Hardened, Half Hard, andStabilizedM&P AMS 4023CN E840401SAEAluminum Alloy Sheet and Plate Alcalad 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (Alclad 6061; -T6 Sheet,-T651 Plate)M&P AMS 4025CE L080701SAE Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si-0.28Cu-0.20Cr(6061-0) Annealed AMS-QQ-A-250/11A - cancelled - 2008M&P AMS 4026CE M080701SAEAluminum Alloy, Sheet and Plate 1.0Mg -0.60Si-0.28Cu-0.20Cr (6061;-T4 Sheet, T-451 Plate)Solution Heat Treated and Naturally AgedAMS-QQ-A-250/11A - cancelled - 2008M&P AMS4027Aluminum Alloy,Sheet and Plate1.0Mg-0.60Si-0.28Cu-0.20Cr(6061;-T6Sheet,T-651Plate)AMS QQ A250/11A ll d2008195 196 197 198 199 200 201 202 203 204AMS 4027CE N080701SAEAluminum Alloy, Sheet and Plate 1.0Mg 0.60Si0.28Cu0.20Cr (6061;T6 Sheet, T651 Plate)Solution and Precipitation Heat TreatAMS-QQ-A-250/11A - cancelled - 2008M&P AMS 4037CN N030701SAEAluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; - T3 Flat Sheet, T351 Plate)Solution Heat TreatedM&P AMS 4080CN N091201SAE Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed M&P AMS 4081CC J080601SAEAluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr(6061-T4) Solution Heat Treated and Naturally AgedM&P AMS 4083BW K000901SAEAluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr-(6061-T6) Solution and Precipitation Heat TreatedM&P AMS 4086BL N060901SAEAluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 4.4Cu-1.5Mg-0.60Mn (2024-T3)Solution Heat Treated, Cold Worked, and Naturally AgedM&P AMS 4088BT K070301SAEAluminum Alloy, Drawn, Seamless Tubing 4.4Cu-1.5Mg-0.60Mn (2024-T3) Solution Heat Treatedand Cold WorkedM&P AMS 4107F051101SAE Alum Aly Die Forg, (7050-T14)M&P AMS 4113CH E030701SAEAluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution andPrecipitation Heat TreatedM&P AMS 4116CN H090701SAEAluminum Alloy, Bars, Rods, and Wire 1.0Mg - 0.60Si - 0.3Cu - 0.20Cr (6061-T4) Cold Finished,Solution Heat Treated and Naturally AgedM&P1Specification Status Change Made atBPS4000 revRev revDate Attachments Org Title supersededBy specialNotes latestSupersedingDoc reviewBy205 206 207AMS 4117CM J090701SAEAluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings 1.0Mg -0.60Si - 0.28Cu - 0.20Cr (6061; - T6, -T651) Solution and Precipitation Heat TreatedM&P AMS 4119Cancelled CN Can900101SAEAluminum Alloy Bars, Rolled, Drawn, or Cold Finished 4.4Cu - 1.5Mg - 0.60Mn (2024-T351) StressRelief StretchedAMS 4120M&P AMS 4120R020901SAEAluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5 Mg - 0.60Mn (2024)Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and NaturallyAged (T351)M&P AMS4121Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg208 209 210 211 212 213 214 215 216AMS 4121CA H071101SAE(2014-T6) Solution and Precipitation Heat TreatedM&P AMS 4123CN H060101SAEAluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and PrecipitationHeat TreatedM&P AMS 4124BU D050801SAEAluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn-2.5Mg-1.6Cu-0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved by Stretching and OveragedM&P AMS 4128CN D071001SAEAluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451)Solution Heat Treated and Stress Relieved by StretchingM&P AMS 4132CF F081201SAEAluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu-1.6Mg-1.1Fe-1.0Ni-0.18Si-0.07Ti (2618-T61) Solution and Precipitation Heat TreatedM&P AMS 4133CN E090301SAEAluminum Alloy Forgings and Rolled Rings 4.4Cu -0.85Si -0.80Mn - 0.50Mg (2014-T6) Solutionand Precipitation Heat TreatedM&P AMS 4135Cancelled CN Can860401SAEAluminum Alloy Forgings 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and PrecipitationHeat TreatedAMS 4133M&P AMS 4141CE F081001SAEAluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and PrecipitationHeat TreatedM&P AMS 4144BN F060501SAEAluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat-TreatedM&P AMS 4149D020901SAEAluminum Alloy, Die and Hand Forgings 5.6n - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution andPrecipitation Heat TreatedM&P217218219220 221 222 223 224 225 226 227 228 229230Precipitation Heat TreatedAMS 4150CN L030801SAEAluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution andPrecipitation Heat TreatedM&P AMS 4162D030701SAEAluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) SolutionTreated, Stress Relief Stretched, Straigtened, and Precipitation Heat TreatedM&P AMS 4173CN E030701SAEAluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Solution HeatTreated,Stress Relieved by Stretching, Straightened, and Precipitation Heat TreatedM&P AMS 4181C030401SAE Aluminum Alloy, Welding Wire 7.0Si - 0.38Mg - 0.10Ti (4008) (UNS A94008)M&P AMS 4182CN G091201SAE Alum Aly Wire, Annealed 5.0Mg - 0.12Mn - 0.12Cr (5056-0) Annealed M&P AMS 4185D000701SAE Fill Mtl, Alum Braz,12SI,(4047)M&P AMS 4188Cancelled Can861001SAE Wldg Wire AMS 4181M&P AMS 4188Cancelled Can861001SAE Wldg Wire AMS 4233M&P AMS 4188Cancelled Can861001SAE Wldg Wire AMS 4244M&P AMS 4188Cancelled Can861001SAE Wldg Wire AMS 4245M&P AMS 4188Cancelled Can861001SAE Wldg Wire AMS 4246M&P AMS 4210CN K050301SAE Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T51) Precipitation Heat Treated M&P AMS 4212CN J051001SAEAluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation HeatTreatedM&P AMS 4214CN J080601SAECastings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0 T71) Solution Heat Treated andOveragedM&P231 232 233 234 235 236 237 238 239 240 241O e agedAMS 4215CN H080301SAEAluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6) Solution and Precipitation HeatTreatedM&P AMS 4217CN H070401SAEAluminum Alloy, Castings 7.0Si - 0.32Mg (A356.0-T6) (Formerly T6P Temper) Solution andPrecipitation Heat TreatedM&P AMS 4218CN J100101SAEAluminum Alloy Castings 7.0Si-0.35Mg (A356.0-T6) (Formerly T6P Temper) Solution andPrecipitation Heat TreatedM&P AMS 4223CN D070401SAEAluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution HeatTreated and Naturally AgedM&P AMS 4224Cancelled no s/s spec CN C100101SAEAluminum Alloy Castings, Sand 4.0Cu - 2.1Ni - 2.0Mg - 0.30Cr - 0.30Mn - 0.13T - 0.13V (243.0)Stabilizedok to use canc spec M&P AMS 4225CN D070601SAEAluminum Alloy, Heat Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti -0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat TreatedM&P AMS 4226Noncurrent CN A830101SAEAluminum Alloy Castings, High Strength 5.0Cu - 0.35Mn - 0.18Zr- 0.10V (224.0) Solution andPrecipitation Heat Treated (Overaged)M&P AMS 4227Cancelled no s/s spec CN E050701SAE Aluminum Alloy, Casting, Sand, 8.0Cu 6.0Mg 0.50Mn 0.50Ni, As Cast ok to use canc spec M&P AMS 4229CN D010501SAEAluminum Alloy Castings, High Strength 4.5Cu - 0.7Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7)Solution Heat Treated and OveragedM&P AMS 4233C030301SAE Aluminum Alloy, Welding Wire 4.5 Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201) (UNS A02010)M&P1Specification Status Change Made atBPS4000 revRev revDate Attachments Org Title supersededBy specialNotes latestSupersedingDoc reviewBy242 243 244 245AMS 4235CN B080301SAEAluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71) Solution andPrecipitation Heat TreatedM&P AMS 4236CN B070801SAEAluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated andNaturally AgedM&P AMS 4237Cancelled no s/s spec CN B070401SAEAluminum Alloy Castings, Sand 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0 - T71) Solution HeatTreated and Naturally Agedok to use canc spec M&P AMS 4241CN D091101SAEAluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti -0.06Be (D357.0 - T6) Solution and PrecipitationHeat Treated Dendrite Arm Spacing (DAS) ControlledM&P AMS4244Aluminum Alloy,Welding Wire4.6Cu-0.35Mn-0.25Mg-0.22Ti for Welding A206.0Type Alloys246 247 248 249 250 251 252 253 254 255 256 257AMS 4244CE B080701SAE Aluminum Alloy, Welding Wire 4.6Cu 0.35Mn 0.25Mg 0.22Ti for Welding A206.0 Type Alloys M&PAMS 4245Noncurrent CR E100401SAE Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (355) (UNS A03550)M&P AMS 4246Noncurrent CP D080201SAE Aluminum Alloy, Welding Wire 7.0Si - 0.52Mg (357) (UNS A03570)M&PAMS 4260Not Acceptable to Useat Parker HannifinAerospaceCL G080601SAE Alum Aly Cast, Invest(356.0-T6)BPS4829AMS4260G unacceptable for Parker Use.BPS4829 created as replacement.M&P AMS 4261CN F091201SAE Aluminum Alloy Castings, Investment 7.0Si - 0.32Mg (356.0 - T51) Precipitation Heat Treated M&P AMS 4280CN J080601SAEAluminum Alloy Castings, Permanent Mold 5.0Si - 1.2Cu - 0.5Mg (355.0-T71) Solution HeatTreated and OveragedM&P AMS 4284CN H080601SAEAluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and PrecipitationHeat TreatedM&P AMS 4289CN-011101SAEAluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6) Solution and Precipitation HeatTreatedM&PAMS 4291CT H101001SAE Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) (See AS1990) As Cast M&PAMS 4315CK-050701SAEAluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T76 Sheet, -T7651 Plate)Solution and Precipitation Heat TreatedM&PAMS 4316CN-050701SAE Aluminum Alloy, Alclad Sheet and Plate 5.6Zn - 2.5Mg M&PAMS 4437CN E080501SAE Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged M&P258 259 260 261 262 263 264 265 266 267 268 269AMS 4507BW H011101SAE Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Half Hard (H02)M&P AMS 4510CN G010501SAE Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu - 4.0Sn - 0.19P Spring Temper (H08)M&PAMS 4511A040701SAECopper Beryllium Alloy Castings 97Cu-2.1Be-0.52(Co+Ni)-0.28Si Solution and Precipitation HeatTreated (TFOO)M&P AMS 4530G050201SAE Copper -Beryllium Alloy Sheet, Strip, and Plate 98Cu - 1.9Be Solution Heat Treated (TB00)M&P AMS 4533CL C090701SAECopper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution and Precipitation Heat Treated(TF00, formerly AT)-UNS C17200M&P AMS 4597CN-060801SAECopper-Nickel-Tin Alloy, Bars and Rods 77Cu - 15Ni - 8Sn Solution Annealed, Cold Finished andSpinodal Hardened (TX TS)M&PAMS 4631Noncurrent CL E880401SAE Aluminum Bronze Rods, Bars, and Forgings 90.5Cu - 7.5Al - 1.95: Stress Relieved M&PAMS 4633CL A031201SAEBronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and StressRelieved (HR50)M&PAMS 4634CL B090301SAE Aluminum Bronze Bars, Rods, and Forgings 905Cu - 7.5Al - 1.9Si Stress Relieved M&P AMS 4635CL F090701SAE Aluminum Bronze Bars, Rods, and Forgings 87Cu - 9Al - 3Fe Stress Relieved M&P AMS 4640G050801SAEAluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0FeDrawn and Stress Relieved (HR50) or Temper Annealed (TQ50)M&P AMS 4650L040301SAECopper-Beryllium Alloy, Bars, Rods, Shapes and Forgings 98Cu - 1.9Be Solution Heat TreatedTB00 (A)M&P270271 272 273 274 275 276 277 278279280281282283()AMS 4651CN C050701SAE Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be (CDA 172) Hard Temper (TD04)M&PAMS 4674CN G060901SAE Nickel - Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu - 0.04S Free Machining M&PAMS 4701CN G091001SAE Copper Wire, Oxygen-Free 99.95 (Cu+Ag) Annealed M&P AMS 4730CN G080701SAE Nickel-Copper Alloy Wire, Corrosion-Resistant 67Ni-31Cu Annealed (400)M&P AMS 4765E990501SAE Braz Fill Mtl M&P AMS 4769F990501SAE Braz Fill Mtl M&P AMS 4770K990501SAE Braz Fill Mtl M&P AMS 4772J990501SAE Braz Fill Mtl M&P AMS 4774F990501SAE Braz Fill Mtl M&PAMS 4775CT J101001SAENickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 to 1970 °F (977 to1077 °C) Solidus-Liquidus RangeM&P AMS 4776CT H101001SAENickel Alloy, Brazing Filler Metal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 to 1970 °F(977 to 1077 °C) Solidus-Liquidus RangeM&P AMS 4777CT H101001SAENickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 °F (971 to 999°C) Solidus-Liquidus RangeM&P AMS 4786CN H090701SAEGold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70 Au - 8.0Pd - 22Ni 1845 to1915 °F (1007 to 1046 °C) Solidus-Liquidus RangeM&P AMS 4787F000401SAE Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915M&P。
SCI Bias Resistor Transistors数据手册说明书
MUN5312DW1,NSBC124EPDXV6,NSBC124EPDP6 Complementary Bias Resistor TransistorsR1 = 22 k W, R2 = 22 k WNPN and PNP Transistors with Monolithic Bias Resistor NetworkThis series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space.Features•Simplifies Circuit Design•Reduces Board Space•Reduces Component Count•S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements;AEC-Q101 Qualified and PPAP Capable*•These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS CompliantMAXIMUM RATINGS(T A = 25°C both polarities Q1 (PNP) & Q2 (NPN), unless otherwise noted) Rating Symbol Max Unit Collector-Base Voltage V CBO50Vdc Collector-Emitter Voltage V CEO50Vdc Collector Current − Continuous I C100mAdc Input Forward Voltage V IN(fwd)40Vdc Input Reverse Voltage V IN(rev)10Vdc Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.ORDERING INFORMATIONDevice Package Shipping†MUN5312DW1T1G,SMUN5312DW1T1G*SOT−3633,000 / Tape & Reel NSVMUN5312DW1T3G*SOT−36310,000 / Tape & ReelMUN5312DW1T2G,NSVMUN5312DW1T2G*SOT−3633,000 / Tape & ReelNSBC124EPDXV6T1G,NSVBC124EPDXV6T1G*SOT−5634,000 / Tape & Reel NSBC124EPDXV6T5G SOT−5638,000 / Tape & Reel NSBC124EPDP6T5G SOT−9638,000 / Tape & Reel†For information on tape and reel specifications, including part orientation andtape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.MARKING DIAGRAMSPIN CONNECTIONS12/R=Specific Device CodeM=Date Code*G=Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location.SOT−363CASE 419B−02SOT−563CASE 463A(1)(2)(3)(6)(5)(4)SOT−963CASE 527ADM1R12 M GG1612 M G1THERMAL CHARACTERISTICSCharacteristic Symbol Max Unit MUN5312DW1 (SOT−363) ONE JUNCTION HEATEDTotal Device DissipationT A = 25°C(Note1)(Note2)Derate above 25°C(Note1)(Note2)P D1872561.52.0mWmW/°CThermal Resistance,(Note1) Junction to Ambient(Note2)R q JA670490°C/WMUN5312DW1 (SOT−363) BOTH JUNCTION HEATED (Note3)Total Device DissipationT A = 25°C(Note1)(Note2)Derate above 25°C(Note1)(Note2)P D2503852.03.0mWmW/°CThermal Resistance,Junction to Ambient(Note1)(Note2)R q JA493325°C/WThermal Resistance, Junction to Lead(Note1)(Note2)R q JL188208°C/WJunction and Storage Temperature Range T J, T stg−55 to +150°C NSBC124EPDXV6 (SOT−563) ONE JUNCTION HEATEDTotal Device DissipationT A = 25°C(Note1)Derate above 25°C(Note1)P D3572.9mWmW/°CThermal Resistance,Junction to Ambient(Note1)R q JA350°C/WNSBC124EPDXV6 (SOT−563) BOTH JUNCTION HEATED (Note3)Total Device DissipationT A = 25°C(Note1)Derate above 25°C(Note1)P D5004.0mWmW/°CThermal Resistance,Junction to Ambient(Note1)R q JA250°C/WJunction and Storage Temperature Range T J, T stg−55 to +150°C NSBC124EPDP6 (SOT−963) ONE JUNCTION HEATEDTotal Device DissipationT A = 25°C(Note4)(Note5)Derate above 25°C(Note4)(Note5)P D2312691.92.2MWmW/°CThermal Resistance,Junction to Ambient(Note4)(Note5)R q JA540464°C/WNSBC124EPDP6 (SOT−963) BOTH JUNCTION HEATED (Note3)Total Device DissipationT A = 25°C(Note4)(Note5)Derate above 25°C(Note4)(Note5)P D3394082.73.3MWmW/°CThermal Resistance,Junction to Ambient(Note4)(Note5)R q JA369306°C/WJunction and Storage Temperature Range T J, T stg−55 to +150°C1.FR−4 @ Minimum Pad.2.FR−*****×1.0 Inch Pad.3.Both junction heated values assume total power is sum of two equally powered channels.4.FR−4 @ 100mm2, 1 oz. copper traces, still air.5.FR−4 @ 500mm2, 1 oz. copper traces, still air.ELECTRICAL CHARACTERISTICS (T A =25°C both polarities Q 1 (PNP) & Q 2 (NPN), unless otherwise noted)CharacteristicSymbolMinTypMaxUnitOFF CHARACTERISTICS Collector-Base Cutoff Current (V CB =50V, I E =0)I CBO −−100nAdcCollector-Emitter Cutoff Current (V CE =50V, I B =0)I CEO −−500nAdcEmitter-Base Cutoff Current (V EB =6.0V, I C =0)I EBO −−0.2mAdcCollector-Base Breakdown Voltage (I C =10m A, I E =0)V (BR)CBO 50−−VdcCollector-Emitter Breakdown Voltage (Note 6)(I C =2.0mA, I B =0)V (BR)CEO50−−VdcON CHARACTERISTICS DC Current Gain (Note 6)(I C =5.0mA, V CE =10V)h FE 60100−Collector-Emitter Saturation Voltage (Note 6)(I C =10mA, I B =0.3mA)V CE(sat)−−0.25VInput Voltage (Off)(V CE =5.0V, I C =100m A) (NPN)(V CE =5.0V, I C =100m A) (PNP)V i(off)−− 1.21.2−−VdcInput Voltage (On)(V CE =0.2V, I C =5.0mA) (NPN)(V CE =0.2V, I C =5.0mA) (PNP)V i(on)−− 1.92.0−−VdcOutput Voltage (On)(V CC =5.0V, V B =2.5V, R L =1.0k W )V OL −−0.2VdcOutput Voltage (Off)(V CC =5.0V, V B =0.5V, R L =1.0k W )V OH 4.9−−VdcInput Resistor R115.42228.6k WResistor RatioR 1/R 20.81.01.2Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.6.Pulsed Condition: Pulse Width =300ms, Duty Cycle ≤2%.Figure 1. Derating CurveAMBIENT TEMPERATURE (°C)P D , P O W E R D I S S I P A T I O N (m W )(1) SOT−363; 1.0×1.0 Inch Pad (2) SOT−563; Minimum Pad(3) SOT−963; 100mm 2, 1 oz. Copper TraceFigure 2. V CE(sat) vs. I CFigure 3. DC Current GainFigure 4. Output Capacitance Figure 5. Output Current vs. Input VoltageFigure 6. Input Voltage vs. Output Current1.60.80V R , REVERSE VOLTAGE (V)0.41.22.02.42.83.2C o b , O U T P U T C A P A C I T A N C E (p F )0.010.001I C , COLLECTOR CURRENT (mA)V C E (s a t ), C O L L E C T O R -E M I T T E R V O L T A G E (V )h F E , D C C U R R E N T G A I N10001001I C , COLLECTOR CURRENT (mA)10I C , C O L L E C T O R C U R R E N T (m A )1001010.10.010.001V in , INPUT VOLTAGE (V)V i n , I N P U T V O L T A G E (V )I C , COLLECTOR CURRENT (mA)1010.1100C o b , O U T P U T C A P A C I T A N C E (p F )Figure 7. V CE(sat) vs. I CFigure 8. DC Current GainFigure 9. Output Capacitance Figure 10. Output Current vs. Input VoltageFigure 11. Input Voltage vs. Output Current10320V R , REVERSE VOLTAGE (V)456789 0.001I C , COLLECTOR CURRENT (mA) 0.11V C E (s a t ), C O L L E C T O R -E M I T T E R V O L T A G E (V ) 0.01h F E , D C C U R R E N T G A I NI C , COLLECTOR CURRENT (mA)1I C , C O L L E C T O R C U R R E N T (m A )100101 0.1 0.01 0.001V in , INPUT VOLTAGE (VOLTS)V i n , I N P U T V O L T A G E (V )I C , COLLECTOR CURRENT (mA)1Figure 12. V CE(sat) vs. I CI C , COLLECTOR CURRENT (mA)10010.1Figure 13. DC Current GainFigure 14. Output CapacitanceI C , COLLECTOR CURRENT (mA)10001001I C , COLLECTOR CURRENT (mA)Figure 15. Output Current vs. Input Voltage1001010.10.01V in , INPUT VOLTAGE (V)Figure 16. Input Voltage vs. Output Current0.41.20V R , REVERSE VOLTAGE (V)V C E (s a t ), C O L L E C T O R −E M I T T E R V O L T A G E (V )h F E , D C C U R R E N T G A I N 0.81.62.02.4C o b , O U T P U T C A P A C I T A N C E (p F )I C , C O L L E C T O R C U R R E N T (m A )V i n , I N P U T V O L T A G E (V )1010Figure 17. V CE(sat) vs. I CFigure 18. DC Current GainI C , COLLECTOR CURRENT (mA)I C , COLLECTOR CURRENT (mA)0.010.11Figure 19. Output CapacitanceFigure 20. Output Current vs. Input VoltageV R , REVERSE VOLTAGE (V)V in , INPUT VOLTAGE (V)Figure 21. Input Voltage vs. Output CurrentI C , COLLECTOR CURRENT (mA)V C E (s a t ), C O L L E C T O R −E M I T T E R V O L T A G E (V )h F E , D C C U R R E N T G A I NC o b , O U T P U T C A P A C I T A N C E (p F )I C , C O L L E C T O R C U R R E N T (m A )V i n , I N P U T V O L T A G E (V )SC−88/SC70−6/SOT−363CASE 419B−02ISSUE YNOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS.3.DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH,PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRU-SIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END.4.DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY AND DATUM H.5.DATUMS A AND B ARE DETERMINED AT DATUM H.6.DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP .7.DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDI-TION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OF THE FOOT.DIM MIN NOM MAX MILLIMETERS A −−−−−− 1.10A10.00−−−0.10dddb 0.150.200.25C 0.080.150.22D 1.80 2.00 2.20−−−−−−0.0430.000−−−0.0040.0060.0080.0100.0030.0060.0090.0700.0780.086MIN NOM MAX INCHES0.100.004E1 1.15 1.25 1.35e 0.65 BSC L 0.260.360.462.00 2.10 2.200.0450.0490.0530.026 BSC0.0100.0140.0180.0780.0820.086*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*DIMENSIONS: MILLIMETERS0.306XRECOMMENDEDSIDE VIEWEND VIEWPLANEDETAIL AE A20.700.90 1.000.0270.0350.039L20.15 BSC 0.006 BSC aaa 0.150.006bbb 0.300.012ccc 0.100.0046XH EDIMMIN NOM MAX MILLIMETERS A 0.500.550.60b 0.170.220.27C D 1.50 1.60 1.70E 1.10 1.20 1.30e 0.5 BSC L 0.100.200.301.50 1.60 1.700.0200.0210.0230.0070.0090.0110.0590.0620.0660.0430.0470.0510.02 BSC0.0040.0080.0120.0590.0620.066MIN NOM MAX INCHESSOT−563, 6 LEADCASE 463A ISSUE GNOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETERS3.MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.ǒmm inchesǓSCALE 20:1*For additional information on our Pb−Free strategy and solderingdetails, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*0.080.120.180.0030.0050.007SOT−963CASE 527AD ISSUE EDIM MIN NOM MAX MILLIMETERS A 0.340.370.40b 0.100.150.20C 0.070.120.17D 0.95 1.00 1.05E 0.750.800.85e 0.35 BSC 0.95 1.00 1.05H E ANOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS3.MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEADTHICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.4.DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS.TOP VIEW SIDE VIEWDIMENSIONS: MILLIMETERSRECOMMENDEDMOUNTING FOOTPRINT*L 0.19 REF L20.050.100.156X *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent PUBLICATION ORDERING INFORMATION。
FUJITSU LIMITED PRIMERGY TX150 S4 BIOS Update tool
********************************************************************************* For PRIMERGY TX150 S4 **** BIOS Update tools V1.0L10 *********************************************************************************FUJITSU LIMITED--------------------------------------------------------------------------This manual explains the BIOS Update tools for PRIMERGY TX150 S4.The manual consists of the following:[Contents]1. Before Using this Software2. Applicable Models3. Revision History (Revised Items)4. How to use5. Trademarks and Copyrights---------------------------------------------------------------------------1. Before Using this SoftwarePlease observe the following terms of use of this software.If you do not agree to the terms of use of this software,please do not use this software.Terms of Use1) This software shall be used only for the applicable model specified below.2) This software shall not be redistributed.3) This software shall not be modified, reverse engineered, or disassembled.4) Any copyright information about this software shall not be modified.5) Fujitsu assumes no responsibility for any damage that may occur as a result of using this software.---------------------------------------------------------------------------2. Applicable ModelsPRIMERGY TX150 S4---------------------------------------------------------------------------3. Revision History (Revised Items)V1.0L10(1) First edition released---------------------------------------------------------------------------4.How to use1) Expand the downloaded TX150103.EXE module, which is in self expand format.2) The following files are expanded:[Installation Procedure]TX150-S4-UpdateNote.pdf[Installation Data kit]make.batmakefpd.batTX153DK1.EXETX153DK2.EXE3) Please execute make.bat file for making Utilities.4) For details on using the Installation Kit, read the expanded installation note(TX150-S4-UpdateNote.pdf).Use a PDF file viewer to read the PDF file.---------------------------------------------------------------------------5. Trademarks and CopyrightsAny other trademarks are those of their respective owners.All Rights Reserved, Copyright© FUJITSU LIMITED 2006。
MKP型号电容器产品说明书
Dimensions: [mm]Scale - 1:2MDBP525256JA20DCPP15040890744429002CSMDBP525256JA20DCPP15040 890744429002CSMDBP525256JA20DCPP15040 890744429002CSMDBP525256JA20DCPP15040 890744429002CST e m p e r a t u r eT T T MDBP525256JA20DCPP15040890744429002CSCautions and Warnings:The following conditions apply to all goods within the product series of Film Capacitors of Würth Elektronik eiSos GmbH & Co. KG:General:•This electronic component is designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for a written approval (following the certain PPAP level procedure) before incorporating the components into any equipment in the field such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. •Direct mechanical impact to the product shall be prevented as material of the body, pins or termination could flake or in the worst case it could break.•Avoid any water or heavy dust on capacitors surface, which may cause electrical leakage, damage, overheating or corrosion.•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristic, beyond Würth Elektronik specifications, for its validity and sustainability over time.•The customer is responsible for the functionality of his or her own products. All technical specifications for standard products also apply to customer specific products.•The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the body, pins or termination may be damaged or dissolved.•Do not apply any kind of flexural or compressive force onto soldered or unsoldered component.•The capacitance tolerance as specified within the datasheet is only valid on the date of delivery and according specified measurement criteria.Product specificStorage conditions• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the components into direct sunlight.•The storage condition in the original packaging is defined according to DIN EN 61760-2.•The environment in which the capacitors are operated and stored has to have atmospheric characteristics and must be free of dew condensation and toxic gases (e.g. chlorine, ammonia, sulfur, hydrogen sulphide and hydrogen sulfate).•Do not expose the capacitor to environments with hazardous gas, ozone, ultraviolet rays or any kind of radiation. Avoid any contact of the capacitor with direct sunshine, saltwater, spray of water or types of oil during storage. •The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Operating climatic conditions•Do not exceed the lower nor the upper specified temperature under no circumstances.•Do not use the capacitors under high humidity, high temperature or under high or low atmospheric pressure which may affect capacitors reliability.•Surface temperature including self-heating must be kept below the maximum operating temperature.Operating load conditions•Due to self-heating the reliability of the capacitor may be reduced, if high frequency AC or pulse is applied.•Consider carefully possible specific changes of electrical characteristics like capacitance over temperature, voltage and time as well as the specific performance over frequency for the actual use conditions.•Avoid any overvoltage and do not apply a continuous overvoltage. If an overvoltage is applied to the capacitor, the leakage current can increase drastically. The applied working voltage is not allowed to exceed the rated working voltage of the specific capacitor.•If film capacitors with safety approvals are operated with a DC voltage exceeding the specified AC voltage, the approvals given on the basis of IEC 60384-14 are no longer valid.•For the WCAP-FTDB film capacitor the maximum peak voltage Vpeak+ shall not be greater than the rated voltage VR according to the temperature derating of the rated voltage VR. The peak-to-peak value of the ripple voltage Vp-p should not be greater than 0.3*VR according to the temperature derating of the rated voltage VR. The rated voltage of the capacitor may need to be reduced for different operating temperatures. See voltage derating curve within this datasheet.Packaging:•The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Soldering•The solder profile must comply with the Würth Elektronik technical soldering specification. All other profiles will void the warranty. •All other soldering methods are at the customer’s own risk.•Strong forces which may affect the coplanarity of the component’s electrical connection with the PCB (i.e. pins), can damage the part, resulting in void of the warranty.•Customer needs to ensure that the applied solder paste, the paste thickness and solder conditions are enough to guarantee a sufficient solder result according to the relevant criteria of IPC-A-610.•Excessive amount of solder may lead to higher tensile force and chip cracking. Insufficient amount of solder may detach the capacitor due to defective contacts.•Do not use excessive nor insufficient flux.Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODFPu001.0002022-10-13DIN ISO 2768-1mDESCRIPTION TECHNICAL REFERENCEWCAP-FTDB DC-Link Capacitor MDBP525256JA20DCPP15040ORDER CODE890744429002CSSIZE/TYPE BUSINESS UNIT STATUS PAGECleaning•Do not use any other cleaning solvents for box-typed capacitors except: ethanol, isopropanol, n-propanol - water mixtures. After cleaning a drying process with temperatures not exceeding 65°C and not longer than 4 hours is mandatory to prevent any kind of electrical damage.Coating, molding and potting of the PCB•If the product is potted in the costumer’s application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the body and termination. Expansion could damage the body or termination. We recommend a manual inspection after potting to avoid these effects.•If final assemblies will be placed completely in any plastic resin, physical, chemical and thermal influences must be considered. •When coating and molding the PCB, verify the quality influence on the capacitor.•Verify the curing temperature and assure that there is no harmful decomposing or reaction gas emission during curing. •Do not exceed the specified max. self-heating.Vibration resistance•Do not exceed the vibration limits given by IEC60068-2-6.Handling•After soldering, please pay attention not to bend, twist or distort the PCB in handling and storage. •Avoid excessive pressure during the functional check of the PCB. •Avoid bending stress while breaking the PCB.•WCAP-FTXX and WCAP-FTX2 capacitors are not designed and not recommended to be used in series connection to the mains. •The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum temperature specified.Flammability•Avoid any external energy or open fire (passive flammability).These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompleteness.(V2.2)Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 174638 Waldenburg GermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCEPROJECTION METHODFPu001.0002022-10-13DIN ISO 2768-1mDESCRIPTIONTECHNICAL REFERENCEWCAP-FTDB DC-Link CapacitorMDBP525256JA20DCPP15040ORDER CODE890744429002CSSIZE/TYPEBUSINESS UNITSTATUSPAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODFPu001.0002022-10-13DIN ISO 2768-1mDESCRIPTION TECHNICAL REFERENCEWCAP-FTDB DC-Link Capacitor MDBP525256JA20DCPP15040ORDER CODE890744429002CSSIZE/TYPE BUSINESS UNIT STATUS PAGE。
威亚维光纤清洁棒选型指南说明书
Selection Guide Fiber Cleaning Tips and Adapters FCLT-U12-MA FCLT-U12X FCLT-U25CleanBlast Tip for SC Bulkheadssupport both PC/UPC and APC polish types with the same tip. Some of the tips are also used in conjunction with a guide, as shown in the images below.Manufacturer: Product Name:VIAVI CLEANBLAST MT BULKHEAD TIP MATING ADAPTER SC SC FCLT-SCX CleanBlast Tip for SC Bulkheads, HardenedE2000CleanBlast Tip for FC BulkheadsCleanBlast Tip for LC BulkheadsCleanBlast Tip for LC Bulkheads, AngledCleanBlast Tip for MU BulkheadsCleanBlast Tip for MPX BulkheadsCleanBlast Tip for MT Ferrule Bulkheads(unconnectorized)SCALE FCLT-MTP CleanBlast Tip for MPO BulkheadsCleanBlast Adapter for MT Ferrule(unconnectorized)Note: Requires FCLT-MTPCleanBlast Tip for MPO Bulkheads, AngledVIAVI CLEANBLAST MT BULKHEAD TIP MATING ADAPTER Manufacturer Part Number: T-MTP-MA Ribbon T-HMFOC-P Ribbon CleanBlast Tip for HMFOC Drop T erminal Ports T-HMFOC-R Ribbon FCLT-HMFOC-R CleanBlast Tip for HMFOC Drop T erminal PortsFCLT-EXBEAM-1CleanBlast Tip for FibrecaST Jr/Sr Expanded Beam SCALE 2:1FBPT-BAP3-125CleanBlast Tip for BAP3 GuidesCleanBlast Tip for BAP4 GuidesFCLT-C130CleanBlast Tip for C130CleanBlast Tip for 29504/14 and 29504/15 T Note: Cleans Both Pins and SocketsCleanBlast Tip for 29504/4 and 29504/5 T Note: Cleans Both Pins and SocketsManufacturer: Product Name: VIAVI CLEANBLAST MT BULKHEAD TIP MATING ADAPTER FCLT-MT-MA © 2020 VIAVI Solutions Inc. Product specifications and descriptions in this document are subject to change without notice. T-MIL2-A6Mil/Aero Angled 60 DegreesNote: Cleans Both Pins and Sockets T-MIL2-CPA Mil/Aero CleanBlast Tip for Use with Glenair T estCleanBlast Tip for 1.25mm LuxCis T erminiNote: Cleans Both Pins and SocketsCleanBlast Tip for 38999 with MT FerrulesNote: Requires FBPT-MT999 GuidesCleanBlast Tip for Radiall Quadrax Size 8 -CleanBlast Tip for Radiall Quadrax Size 8 -CleanBlast Tip for TFOCA-II Connectors(includes Guide)or call 1-844-Go VIAVI (+1-844-468-4284).。
浙江昆仑光电有限公司 817C型号光电接线器产品说明书
Dimensions: [mm]2112Scale - 3:1Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 174638 Waldenburg Germany140817141310Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive Solutions140817141310 Max-Eyth-Str. 174638 WaldenburgGermanyTotal Power Dissipation vs. Ambient Temperature:20406080100120140160-55-35-15525456585105125IR-diode -I F(mA)Ambient Temperature (°C)Phototransistor-PO(mW)CollectorPowerDissipation(mW)ForwardCurrent(mA)Collector Dark Current vs. Ambient Temperature:11010010001000025456585105125CollectorDarkCurrent(nA)Ambient Temperature (°C)V CE= 20VV CE= 10VNote: measured with Bin BWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODSaVo001.0052023-08-22DIN ISO 2768-1mDESCRIPTIONWL-OCPT OptocouplerPhototransistor ORDER CODE140817141310SIZE/TYPE BUSINESS UNIT STATUS PAGEAbsolute CTR vs. Ambient Temperature50100150200250300-60-40-20020406080100120AbsoluteCTRAmbient Temperature (°C)V CE= 5VV CE= 0,4VTestcondition: I F=5mA, T A=25°C, Bin BRelative CTR vs. Ambient Temperature:0,40,60,811,21,4-60-40-20020406080100120RelativeCTRAmbient Temperature (°C)V CE= 5VV CE= 0,4VTestcondition: I F=5mA, Normalized to T A=25°C, Bin BWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODSaVo001.0052023-08-22DIN ISO 2768-1mDESCRIPTIONWL-OCPT OptocouplerPhototransistor ORDER CODE140817141310SIZE/TYPE BUSINESS UNIT STATUS PAGEWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive Solutions140817141310 Max-Eyth-Str. 174638 WaldenburgGermanyWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive Solutions140817141310 Max-Eyth-Str. 174638 WaldenburgGermany050100150200250300350400450A b s o l u t e C T R (%)Testcondition T A Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 174638 Waldenburg Germany140817141310050100150200250300A b s o l u t e C T R (%)Testcondition T A Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 174638 Waldenburg Germany1408171413100102030R e s p o n s e T i m e (µs )Testcondition I C Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 174638 Waldenburg Germany140817141310Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive Solutions140817141310 Max-Eyth-Str. 174638 WaldenburgGermanyWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive Solutions140817141310 Max-Eyth-Str. 174638 WaldenburgGermanyT e m p e r a t u r eT T T Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 174638 Waldenburg Germany140817141310Cautions and Warnings:The following conditions apply to all goods within the product series of Optoelectronic Components of Würth Elektronik eiSos GmbH & Co. KG:General:•This optoelectronic component is designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control,ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Optoelectronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. •The optoelectronic component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved. •Do not drop or impact the components, the component may be damaged•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.•The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products.•Unless Würth Elektroik has given its express consent, the customer is under no circumstances entitled to reverse engineer, disassemble or otherwise attempt to extract knowledge or design information from the optoelectronic component.Product specific:Soldering:•The solder profile must comply with the technical product specifications. All other profiles will void the warranty. •All other soldering methods are at the customers’ own risk•The soldering pad pattern shown above is a general recommendation for the easy assembly of optoelectronic components. If a high degree of precision is required for the selected application (i.e. high density assembly), the customer must ensure that the soldering pad pattern is optimized accordingly.Cleaning and Washing:•Washing agents used during the production to clean the customer application might damage or change the characteristics of the optoelectronic component body, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product.• Using a brush during the cleaning process may break the optoelectronic component body. Therefore, we do not recommend using a brush during the PCB cleaning process.Potting:•If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the optoelectronic component body, pins or termination. Expansion could damage the components. We recommend a manual inspection after potting to avoid these effects.Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the optoelectronic component to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.•For a moisture sensitive component, the storage condition in the original packaging is defined according to IPC/JEDEC-J-STD-033. It is also recommended to return the optoelectronic component to the original moisture proof bag and reseal the moisture proof bag again. •The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components.Packaging:•The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured.Handling:•Violation of the technical product specifications such as exceeding the nominal rated current, will void the warranty. •The product design may influence the automatic optical inspection.•Certain optoelectronic component surfaces consist of soft material. Pressure on the top surface has to be handled carefully to prevent negative influence to the function and reliability of the optoelectronic components.•ESD prevention methods need to be applied for manual handling and processing by machinery. •Resistors for protection are obligatory.•In addition to optoelectronic components testing, products incorporating these devices have to comply with the safety precautions given in IEC 60825-1, IEC 62471 and IEC 62778.Technical specification:•The typical and/or calculated values and graphics of technical parameters can only reflect statistical figures. The actual parameters ofeach single product, may differ from the typical and/or calculated values or the typical characteristic line.Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 174638 Waldenburg GermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCEPROJECTION METHODSaVo001.0052023-08-22DIN ISO 2768-1mDESCRIPTIONWL-OCPT Optocoupler PhototransistorORDER CODE140817141310SIZE/TYPEBUSINESS UNITSTATUSPAGE•In the characteristics curves, all values given in dotted lines may show a higher deviation than the paramters mentioned above. •On each reel, only one bin is sorted and taped. The bin is defined on the current transfer ratio.•In order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered. Please contact us in advance, if you need a particular bin sorting before placing your order.•These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. However, no responsibility is assumed for inaccuracies or incompleteness.The customer has the sole responsibility to ensure that he uses the latest version of this datasheet, which is available on Würth Elektronik’s homepage. Unless otherwise agreed in writing (i.e. customer specific specification), changes to the content of this datasheet may occurwithout notice, provided that the changes do not have a significant effect on the usability of the optoelectronic components.Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 174638 Waldenburg GermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCEPROJECTION METHODSaVo001.0052023-08-22DIN ISO 2768-1mDESCRIPTIONWL-OCPT Optocoupler PhototransistorORDER CODE140817141310SIZE/TYPEBUSINESS UNITSTATUSPAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODSaVo001.0052023-08-22DIN ISO 2768-1mDESCRIPTIONWL-OCPT OptocouplerPhototransistor ORDER CODE140817141310SIZE/TYPE BUSINESS UNIT STATUS PAGE。
电子产品说明书.pdf_1719725087.8025112
Tech Date Box 1 - EC3000-R32XWBB Wt: 40 lbs. Dim: 18" x 21" x 12"Part No.Description Quantity Yes Remarks1EC3000Processor Unit 12000-176-663-11Cbl Assy DB9-DB9 5m 13000-176-423-11AC Power Cbl 5m 14000-174-113-10LAN Cable Assy 0.5m 15000-157-47010A Fuse FGMB 250V 10A PBF 3SP24-006016100-366-821-10Dust Proof Sponge 1FP24-006037001-285-750-00DVD-R 1"8100-366-811-10Wiring Plate 11CP24-021019100-367-720-10Chassis Base 11"10100-372-170-10Chassis Base 21"11001-186-200-00Wiring Plate 2 Assy 1"12000-162-167Cable Tie CV-100N 100mm 10"13000-162-186-10Cable Tie CV-150N 150mm 30"14000-166-666-10Crimp-on Lug FV1.25-4 Red 9"15000-162-664-10Binding Head Screw M3X6 SUS3045"16000-162-669-10Binding Head Screw M4X8 SUS30410"17E42-013-05Z Instruction Manual 118OSE-361-60Z Operator's Guide 119IME-362-40Z Installation Manual 120000-178-766Operator's Manual CD 121Dongle Information Sheet 1Box 2 - RCU025Wt: 10 lbs. Dim: 19" x 11" x 9"Part No.Description Quantity Yes Remarks 1RCU025Radar Control Unit 12000-176-700-11Cable Assy TS-20-071-1 5m 13100-367-460-10Desk Fixing Plate 1FP24-007014100-372-000-10USB Sheet 1"5000-163-192-10Washer Head Screw M4X124"6000-162-608-10Self-Tapping Screw 5X20 SUS3042CP24-022017000-172-164-10Cable Tie CV-125N 125mm 2"8001-188-3005M USB Cable 1Box 3 - RTR108Wt: 52 lbs. Dim: 27" x 24" x 20"Part No.Description Quantity Yes RemarksRTR108Transceiver Unit 1PACKING LIST FOR FAR3220WBBEC3000-R32XWBB RCU025RTR108Tech Date Box 4 - RSB130N Wt: 94 lbs. Dim: 25" x 25" x 32"Part No.Description Quantity Yes Remarks 1RSB130N Gearbox 25kW X-Band 12300-130-020-10Seal Washer 4CP03-359013000-167-397-10Spring Washer M124"4000-167-491-10Hex Nut M124"5000-167-446-10Flat Washer M124"6000-162-813-10Hex Head Screw M12X604"7000-158-856-10Hex Nut M61"8000-158-855-10Spring Washer M61"9000-158-854-10Flat Washer M61"10000-162-871-10Hex Head Bolt M6X251"11000-566-000Ground Wire Assy 30cm 1"12C32-013-02Z Installation Notice 1Box 5 - PSU014Part No.Description Quantity Yes Remarks 1PSU014Power Supply Unit 12000-166-666-10Crimp-on Lug FV1.25-41CP03-353013000-157-247-10Crimp-on Lug FV2-43"4000-157-250-10Crimp-on Lug FV2-M31"5000-166-044-10Connector MPS588-C 3"6000-178-084-10Fuse 7A 250V 2SP03-17641Box 6 - 001-259-860-00Wt: 51 lbs. Dim: 19" x 19" x 7"Part No.Description Quantity Yes Remarks 1001-259-860-00Cable Assy RW-00135-L30M 1Box 7 - 008-470-020-00Part No.Description Quantity Yes Remarks1300-903-680-10Watertight Film 12100-207-551-10Thru-deck Cable Gland 13100-207-560-10Washer 24100-207-570-10Rubber Packing 25100-207-580-10Rubber Packing (2)26000-172-180-10O Ring AS568-12837000-171-869-10Cable Gland 18000-162-940-10Washer Head Bolt M4x164Wt: 22 lbs. Dim: 21" x 20" x 11"PSU014PACKING LIST FOR FAR3220BBRSB130N Wt: 7 lbs. Dim: 12" x 9" x 8"008-470-020-00001-259-860-00Tech Date Box 8 - FR9-20Wt: 55 lbs. Dim: 49" x 49" x 14"Part No.Description Quantity Yes Remarks 1FR9-20Flex Waveguide 20m 12KE45W RTV 100g 13M4x16 Hex Head Screws 84O Ring 35Electrical Tape 16Self-Vulcanizing Tape 1Rev 1/17PACKING LIST FOR FAR3220WBBFR9-20。
注油器
注油器1、瑞士小保姆自动注油器简介：来自瑞士的高科技产品-小保姆自动注脂器（Simalube自动注脂器）。
你的设备忘记注入润滑剂，轴承、链条、齿轮、轨道等磨损将成为历史。
小保姆自动注油器（Simalube自动注脂器）会一天24小时，一年365天照顾着你的设备。
特点：1、设定1~12个月内全自动、均匀、准时、准确地注入设备每天所需的润滑剂。
2、主动受控制式润滑管理，大量节省设备维修成本。
3、可避免溢出污染或断油之烦恼。
4、可保持润滑面持续新油供给。
5、干电池操作，不受外界因素影响。
6、可重复使用、环保，价格低廉。
7、按需要随时可停可续。
8、独特设计，防爆安全，安装灵活，简便，不受方向、位置限制。
9、可在水下安装。
下表是部分型号对应的润滑油类型润滑油型号空瓶 SL00多用途油脂 SL01多用途油脂二硫化钼 SL02多用途油脂二硫化钼 system24耐高温润滑油脂 SL04液态润滑油 SL06易分解油脂 SL09食品工业油脂 SL10链条润滑油脂 SL14耐高温链条润滑油脂 SL15食油 SL18多用途，适合广泛温度油脂 SL24气体产生器 5008注：SKF 型号 SYSTEM24 等同于SL022、加拿大ATS自动注油器简介：加拿大产ATS自动注油器，能够保证你的设备处于良好的润滑状态，一年365天的分分秒秒都可以为你的设备上的轴承、齿轮、齿条、链条、链轮、轨道、丝杠等零部件提供新鲜的润滑剂。
适用范围：可以用于港口、风力发电机、钢铁厂、自来水厂、汽车制造厂、石油化工行业、食品行业、煤炭等所有需要润滑的场所。
由于能在零下40℃低温环境下正常工作，因而特别适合于野外风力发电机使用。
特点：1、采用微电脑控制，拨码开关设定1、2、3、6、12个月内全自动、均匀、准时、准确地注入设备每天所需的润滑剂。
2、微电脑设有立即启动功能，没有启动延时时间。
3、主动受控制式润滑管理，大量节省设备维修成本。
4、可避免溢出污染或断油之烦恼。
Silicon Labs Si4463 EZRadioPRO智能电网应用参考设计
Silicon Labs Si4463 EZRadioPRO智能电网应用参考设计佚名
【期刊名称】《世界电子元器件》
【年(卷),期】2015(000)003
【摘要】<正>Silicon Laboratories的Si446x是一款高性能、低电流收发器,覆盖119MHz~1050MHz的sub-GHz频带。
该收发装置是EZRadio PRO系
列产品的一部分,其中包括完整的发射器、接收器和收发器系列,覆盖了广泛的应用
范围。
所有部件具有出色的灵敏度(-126d Bm),同时实现了较低的工作和待机电耗。
Si4464提供整个sub-GHz频段,从119MHz~960MHz的连续频率范围,并具有非常精细的
【总页数】3页(P7-9)
【正文语种】中文
【中图分类】TM76
【相关文献】
1.Si4463 EZRadioPRO：智能电网应用参考设计 [J],
2.Silicon Laboratories推出数字化电源应用POL参考设计 [J], 无
3.Silicon Labs最新智能家居参考设计加速IoT可连接设备开发 [J],
4.贸泽开售Silicon Labs ZigBee参考设计 [J],
5.Silicon Labs参考设计简化USB Type-C移动电源充电宝开发 [J],
因版权原因，仅展示原文概要，查看原文内容请购买。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
SUCROSE ACETATE ISOBUTYRATE
Prepared at the 46th JECFA (1996), published in FNP 52 Add 4 (1996)
superseding specifications prepared at the 41st JECFA (1993), published in
FNP 52 Add 2 (1993). Metals and arsenic specifications revised at the 61st
JECFA (2003. An ADI of 0-20 mg/kg bw was established at the 46th
JECFA (1996))
SYNONYMS SAIB, INS No. 444
DEFINITION A mixture of the reaction products formed by the esterification of food grade sucrose with acetic anhydride and isobutyric anhydride, followed by
distillation. The mixture contains all possible combinations of esters in
which the molar ratio of acetate to isobutyrate is about 2:6
Chemical names Sucrose diacetate hexaisobutyrate (approximate)
C.A.S. number 137204-24-1; 27216-37-1; 126-13-6
Chemical formula C40H62O19 for sucrose diacetate hexaisobutyrate
Structural formula
where
R1 = -CH2OCOCH3, and
R2 = -CH2OCOCH(CH3)2, or -OCOCH(CH3)2
Formula weight 832 - 856 (approximate), C40H62O19 = 846.9
Assay Not less than 98.8% and not more than 101.9% of C40H62O19
DESCRIPTION Pale straw coloured liquid, clear and free of sediment and having a bland
odour
FUNCTIONAL USES Density adjusting agent, cloud-producing agent in non-alcoholic beverages CHARACTERISTICS
IDENTIFICATION
Solubility(Vol. 4) Insoluble in water, soluble in most organic solvents
Refractive index (Vol. 4) n (40, D): 1.4492 - 1.4504
Specific gravity(Vol. 4) d (25, 25): 1.141 - 1.151
Infrared absorption The infrared spectrum of a potassium bromide dispersion of the sample
corresponds with the reference infrared spectrum in the Appendix PURITY
Acid value(Vol. 4) Not more than 0.2
Proceed as directed under Acid Value, using 50 g of the sample and a
microburette
Saponification value (Vol. 4) Between 524 and 540 Use 1 g of the sample
Triacetin Not more than 0.1%
See description under TESTS
Lead(Vol. 4) Not more than 2 mg/kg
Determine using an atomic absorption technique appropriate to the
specified level. The selection of sample size and method of sample
preparation may be based on the principles of the method described in
Volume 4, “Instrumental Methods.”
TESTS
PURITY TESTS
Triacetin Test by the following gas chromatographic procedure
Apparatus:
Gas chromatograph equipped with a flame ionization detector
Column: Stainless steel, 1.5 m, 3.2 mm i.d.
Preparation of sample:
Dilute the sample by adding an equal volume of carbon disulfide.
Conditions
Stationary phase: SE-30, 3%
Solid phase: Chromosorb AW-DMCS, 80-100 mesh
Carrier gas: Helium
Flow rate: 20 ml/min
Temperatures
- Column: Programmed at 10o per min from 100o to 300o immediately after
injection of the sample
- Injector: 300o
Injected volume: 1 µl
METHOD OF ASSAY Using the saponification value, calculate the percentage of C40H62O19by the formula:
where
SV = saponification value Infrared spectrum Sucrose acetate isobutyrate。